Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 96 insertions, 0 deletions

diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
new file mode 100644
index 0000000000..0fa4799ea3
--- /dev/null
+++ b/drivers/cxl/cxlpci.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#ifndef __CXL_PCI_H__
+#define __CXL_PCI_H__
+#include <linux/pci.h>
+#include "cxl.h"
+
+#define CXL_MEMORY_PROGIF	0x10
+
+/*
+ * See section 8.1 Configuration Space Registers in the CXL 2.0
+ * Specification. Names are taken straight from the specification with "CXL" and
+ * "DVSEC" redundancies removed. When obvious, abbreviations may be used.
+ */
+#define PCI_DVSEC_HEADER1_LENGTH_MASK	GENMASK(31, 20)
+#define PCI_DVSEC_VENDOR_ID_CXL		0x1E98
+
+/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
+#define CXL_DVSEC_PCIE_DEVICE					0
+#define   CXL_DVSEC_CAP_OFFSET		0xA
+#define     CXL_DVSEC_MEM_CAPABLE	BIT(2)
+#define     CXL_DVSEC_HDM_COUNT_MASK	GENMASK(5, 4)
+#define   CXL_DVSEC_CTRL_OFFSET		0xC
+#define     CXL_DVSEC_MEM_ENABLE	BIT(2)
+#define   CXL_DVSEC_RANGE_SIZE_HIGH(i)	(0x18 + (i * 0x10))
+#define   CXL_DVSEC_RANGE_SIZE_LOW(i)	(0x1C + (i * 0x10))
+#define     CXL_DVSEC_MEM_INFO_VALID	BIT(0)
+#define     CXL_DVSEC_MEM_ACTIVE	BIT(1)
+#define     CXL_DVSEC_MEM_SIZE_LOW_MASK	GENMASK(31, 28)
+#define   CXL_DVSEC_RANGE_BASE_HIGH(i)	(0x20 + (i * 0x10))
+#define   CXL_DVSEC_RANGE_BASE_LOW(i)	(0x24 + (i * 0x10))
+#define     CXL_DVSEC_MEM_BASE_LOW_MASK	GENMASK(31, 28)
+
+#define CXL_DVSEC_RANGE_MAX		2
+
+/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
+#define CXL_DVSEC_FUNCTION_MAP					2
+
+/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
+#define CXL_DVSEC_PORT_EXTENSIONS				3
+
+/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
+#define CXL_DVSEC_PORT_GPF					4
+
+/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
+#define CXL_DVSEC_DEVICE_GPF					5
+
+/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
+#define CXL_DVSEC_PCIE_FLEXBUS_PORT				7
+
+/* CXL 2.0 8.1.9: Register Locator DVSEC */
+#define CXL_DVSEC_REG_LOCATOR					8
+#define   CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET			0xC
+#define     CXL_DVSEC_REG_LOCATOR_BIR_MASK			GENMASK(2, 0)
+#define	    CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK			GENMASK(15, 8)
+#define     CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK		GENMASK(31, 16)
+
+/*
+ * NOTE: Currently all the functions which are enabled for CXL require their
+ * vectors to be in the first 16.  Use this as the default max.
+ */
+#define CXL_PCI_DEFAULT_MAX_VECTORS 16
+
+/* Register Block Identifier (RBI) */
+enum cxl_regloc_type {
+	CXL_REGLOC_RBI_EMPTY = 0,
+	CXL_REGLOC_RBI_COMPONENT,
+	CXL_REGLOC_RBI_VIRT,
+	CXL_REGLOC_RBI_MEMDEV,
+	CXL_REGLOC_RBI_PMU,
+	CXL_REGLOC_RBI_TYPES
+};
+
+struct cdat_header {
+	__le32 length;
+	u8 revision;
+	u8 checksum;
+	u8 reserved[6];
+	__le32 sequence;
+} __packed;
+
+struct cdat_entry_header {
+	u8 type;
+	u8 reserved;
+	__le16 length;
+} __packed;
+
+int devm_cxl_port_enumerate_dports(struct cxl_port *port);
+struct cxl_dev_state;
+int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm,
+			struct cxl_endpoint_dvsec_info *info);
+void read_cdat_data(struct cxl_port *port);
+void cxl_cor_error_detected(struct pci_dev *pdev);
+pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
+				    pci_channel_state_t state);
+#endif /* __CXL_PCI_H__ */