Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 165 insertions, 0 deletions

diff --git a/drivers/firmware/efi/libstub/relocate.c b/drivers/firmware/efi/libstub/relocate.c
new file mode 100644
index 0000000000..bf6fbd5d22
--- /dev/null
+++ b/drivers/firmware/efi/libstub/relocate.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/**
+ * efi_low_alloc_above() - allocate pages at or above given address
+ * @size:	size of the memory area to allocate
+ * @align:	minimum alignment of the allocated memory area. It should
+ *		a power of two.
+ * @addr:	on exit the address of the allocated memory
+ * @min:	minimum address to used for the memory allocation
+ *
+ * Allocate at the lowest possible address that is not below @min as
+ * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
+ * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
+ * given by @min.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
+				 unsigned long *addr, unsigned long min)
+{
+	struct efi_boot_memmap *map;
+	efi_status_t status;
+	unsigned long nr_pages;
+	int i;
+
+	status = efi_get_memory_map(&map, false);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	/*
+	 * Enforce minimum alignment that EFI or Linux requires when
+	 * requesting a specific address.  We are doing page-based (or
+	 * larger) allocations, and both the address and size must meet
+	 * alignment constraints.
+	 */
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	size = round_up(size, EFI_ALLOC_ALIGN);
+	nr_pages = size / EFI_PAGE_SIZE;
+	for (i = 0; i < map->map_size / map->desc_size; i++) {
+		efi_memory_desc_t *desc;
+		unsigned long m = (unsigned long)map->map;
+		u64 start, end;
+
+		desc = efi_early_memdesc_ptr(m, map->desc_size, i);
+
+		if (desc->type != EFI_CONVENTIONAL_MEMORY)
+			continue;
+
+		if (efi_soft_reserve_enabled() &&
+		    (desc->attribute & EFI_MEMORY_SP))
+			continue;
+
+		if (desc->num_pages < nr_pages)
+			continue;
+
+		start = desc->phys_addr;
+		end = start + desc->num_pages * EFI_PAGE_SIZE;
+
+		if (start < min)
+			start = min;
+
+		start = round_up(start, align);
+		if ((start + size) > end)
+			continue;
+
+		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+				     EFI_LOADER_DATA, nr_pages, &start);
+		if (status == EFI_SUCCESS) {
+			*addr = start;
+			break;
+		}
+	}
+
+	if (i == map->map_size / map->desc_size)
+		status = EFI_NOT_FOUND;
+
+	efi_bs_call(free_pool, map);
+fail:
+	return status;
+}
+
+/**
+ * efi_relocate_kernel() - copy memory area
+ * @image_addr:		pointer to address of memory area to copy
+ * @image_size:		size of memory area to copy
+ * @alloc_size:		minimum size of memory to allocate, must be greater or
+ *			equal to image_size
+ * @preferred_addr:	preferred target address
+ * @alignment:		minimum alignment of the allocated memory area. It
+ *			should be a power of two.
+ * @min_addr:		minimum target address
+ *
+ * Copy a memory area to a newly allocated memory area aligned according
+ * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
+ * is not available, the allocated address will not be below @min_addr.
+ * On exit, @image_addr is updated to the target copy address that was used.
+ *
+ * This function is used to copy the Linux kernel verbatim. It does not apply
+ * any relocation changes.
+ *
+ * Return:		status code
+ */
+efi_status_t efi_relocate_kernel(unsigned long *image_addr,
+				 unsigned long image_size,
+				 unsigned long alloc_size,
+				 unsigned long preferred_addr,
+				 unsigned long alignment,
+				 unsigned long min_addr)
+{
+	unsigned long cur_image_addr;
+	unsigned long new_addr = 0;
+	efi_status_t status;
+	unsigned long nr_pages;
+	efi_physical_addr_t efi_addr = preferred_addr;
+
+	if (!image_addr || !image_size || !alloc_size)
+		return EFI_INVALID_PARAMETER;
+	if (alloc_size < image_size)
+		return EFI_INVALID_PARAMETER;
+
+	cur_image_addr = *image_addr;
+
+	/*
+	 * The EFI firmware loader could have placed the kernel image
+	 * anywhere in memory, but the kernel has restrictions on the
+	 * max physical address it can run at.  Some architectures
+	 * also have a preferred address, so first try to relocate
+	 * to the preferred address.  If that fails, allocate as low
+	 * as possible while respecting the required alignment.
+	 */
+	nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+			     EFI_LOADER_DATA, nr_pages, &efi_addr);
+	new_addr = efi_addr;
+	/*
+	 * If preferred address allocation failed allocate as low as
+	 * possible.
+	 */
+	if (status != EFI_SUCCESS) {
+		status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
+					     min_addr);
+	}
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate usable memory for kernel.\n");
+		return status;
+	}
+
+	/*
+	 * We know source/dest won't overlap since both memory ranges
+	 * have been allocated by UEFI, so we can safely use memcpy.
+	 */
+	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
+
+	/* Return the new address of the relocated image. */
+	*image_addr = new_addr;
+
+	return status;
+}