Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 349 insertions, 43 deletions

diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index f3680f4e6..26c188ce5 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -2102,7 +2102,6 @@ int drm_dp_aux_register(struct drm_dp_aux *aux)
 	if (!aux->ddc.algo)
 		drm_dp_aux_init(aux);
 
-	aux->ddc.class = I2C_CLASS_DDC;
 	aux->ddc.owner = THIS_MODULE;
 	aux->ddc.dev.parent = aux->dev;
 
@@ -2245,6 +2244,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = {
 	{ OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
 	/* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */
 	{ OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
+	/* Synaptics DP1.4 MST hubs require DSC for some modes on which it applies HBLANK expansion. */
+	{ OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
 	/* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */
 	{ OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
 };
@@ -2327,6 +2328,33 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
 EXPORT_SYMBOL(drm_dp_read_desc);
 
 /**
+ * drm_dp_dsc_sink_bpp_incr() - Get bits per pixel increment
+ * @dsc_dpcd: DSC capabilities from DPCD
+ *
+ * Returns the bpp precision supported by the DP sink.
+ */
+u8 drm_dp_dsc_sink_bpp_incr(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
+{
+	u8 bpp_increment_dpcd = dsc_dpcd[DP_DSC_BITS_PER_PIXEL_INC - DP_DSC_SUPPORT];
+
+	switch (bpp_increment_dpcd) {
+	case DP_DSC_BITS_PER_PIXEL_1_16:
+		return 16;
+	case DP_DSC_BITS_PER_PIXEL_1_8:
+		return 8;
+	case DP_DSC_BITS_PER_PIXEL_1_4:
+		return 4;
+	case DP_DSC_BITS_PER_PIXEL_1_2:
+		return 2;
+	case DP_DSC_BITS_PER_PIXEL_1_1:
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_dsc_sink_bpp_incr);
+
+/**
  * drm_dp_dsc_sink_max_slice_count() - Get the max slice count
  * supported by the DSC sink.
  * @dsc_dpcd: DSC capabilities from DPCD
@@ -3898,3 +3926,142 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
 EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
 
 #endif
+
+/* See DP Standard v2.1 2.6.4.4.1.1, 2.8.4.4, 2.8.7 */
+static int drm_dp_link_symbol_cycles(int lane_count, int pixels, int bpp_x16,
+				     int symbol_size, bool is_mst)
+{
+	int cycles = DIV_ROUND_UP(pixels * bpp_x16, 16 * symbol_size * lane_count);
+	int align = is_mst ? 4 / lane_count : 1;
+
+	return ALIGN(cycles, align);
+}
+
+static int drm_dp_link_dsc_symbol_cycles(int lane_count, int pixels, int slice_count,
+					 int bpp_x16, int symbol_size, bool is_mst)
+{
+	int slice_pixels = DIV_ROUND_UP(pixels, slice_count);
+	int slice_data_cycles = drm_dp_link_symbol_cycles(lane_count, slice_pixels,
+							  bpp_x16, symbol_size, is_mst);
+	int slice_eoc_cycles = is_mst ? 4 / lane_count : 1;
+
+	return slice_count * (slice_data_cycles + slice_eoc_cycles);
+}
+
+/**
+ * drm_dp_bw_overhead - Calculate the BW overhead of a DP link stream
+ * @lane_count: DP link lane count
+ * @hactive: pixel count of the active period in one scanline of the stream
+ * @dsc_slice_count: DSC slice count if @flags/DRM_DP_LINK_BW_OVERHEAD_DSC is set
+ * @bpp_x16: bits per pixel in .4 binary fixed point
+ * @flags: DRM_DP_OVERHEAD_x flags
+ *
+ * Calculate the BW allocation overhead of a DP link stream, depending
+ * on the link's
+ * - @lane_count
+ * - SST/MST mode (@flags / %DRM_DP_OVERHEAD_MST)
+ * - symbol size (@flags / %DRM_DP_OVERHEAD_UHBR)
+ * - FEC mode (@flags / %DRM_DP_OVERHEAD_FEC)
+ * - SSC/REF_CLK mode (@flags / %DRM_DP_OVERHEAD_SSC_REF_CLK)
+ * as well as the stream's
+ * - @hactive timing
+ * - @bpp_x16 color depth
+ * - compression mode (@flags / %DRM_DP_OVERHEAD_DSC).
+ * Note that this overhead doesn't account for the 8b/10b, 128b/132b
+ * channel coding efficiency, for that see
+ * @drm_dp_link_bw_channel_coding_efficiency().
+ *
+ * Returns the overhead as 100% + overhead% in 1ppm units.
+ */
+int drm_dp_bw_overhead(int lane_count, int hactive,
+		       int dsc_slice_count,
+		       int bpp_x16, unsigned long flags)
+{
+	int symbol_size = flags & DRM_DP_BW_OVERHEAD_UHBR ? 32 : 8;
+	bool is_mst = flags & DRM_DP_BW_OVERHEAD_MST;
+	u32 overhead = 1000000;
+	int symbol_cycles;
+
+	if (lane_count == 0 || hactive == 0 || bpp_x16 == 0) {
+		DRM_DEBUG_KMS("Invalid BW overhead params: lane_count %d, hactive %d, bpp_x16 %d.%04d\n",
+			      lane_count, hactive,
+			      bpp_x16 >> 4, (bpp_x16 & 0xf) * 625);
+		return 0;
+	}
+
+	/*
+	 * DP Standard v2.1 2.6.4.1
+	 * SSC downspread and ref clock variation margin:
+	 *   5300ppm + 300ppm ~ 0.6%
+	 */
+	if (flags & DRM_DP_BW_OVERHEAD_SSC_REF_CLK)
+		overhead += 6000;
+
+	/*
+	 * DP Standard v2.1 2.6.4.1.1, 3.5.1.5.4:
+	 * FEC symbol insertions for 8b/10b channel coding:
+	 * After each 250 data symbols on 2-4 lanes:
+	 *   250 LL + 5 FEC_PARITY_PH + 1 CD_ADJ   (256 byte FEC block)
+	 * After each 2 x 250 data symbols on 1 lane:
+	 *   2 * 250 LL + 11 FEC_PARITY_PH + 1 CD_ADJ (512 byte FEC block)
+	 * After 256 (2-4 lanes) or 128 (1 lane) FEC blocks:
+	 *   256 * 256 bytes + 1 FEC_PM
+	 * or
+	 *   128 * 512 bytes + 1 FEC_PM
+	 * (256 * 6 + 1) / (256 * 250) = 2.4015625 %
+	 */
+	if (flags & DRM_DP_BW_OVERHEAD_FEC)
+		overhead += 24016;
+
+	/*
+	 * DP Standard v2.1 2.7.9, 5.9.7
+	 * The FEC overhead for UHBR is accounted for in its 96.71% channel
+	 * coding efficiency.
+	 */
+	WARN_ON((flags & DRM_DP_BW_OVERHEAD_UHBR) &&
+		(flags & DRM_DP_BW_OVERHEAD_FEC));
+
+	if (flags & DRM_DP_BW_OVERHEAD_DSC)
+		symbol_cycles = drm_dp_link_dsc_symbol_cycles(lane_count, hactive,
+							      dsc_slice_count,
+							      bpp_x16, symbol_size,
+							      is_mst);
+	else
+		symbol_cycles = drm_dp_link_symbol_cycles(lane_count, hactive,
+							  bpp_x16, symbol_size,
+							  is_mst);
+
+	return DIV_ROUND_UP_ULL(mul_u32_u32(symbol_cycles * symbol_size * lane_count,
+					    overhead * 16),
+				hactive * bpp_x16);
+}
+EXPORT_SYMBOL(drm_dp_bw_overhead);
+
+/**
+ * drm_dp_bw_channel_coding_efficiency - Get a DP link's channel coding efficiency
+ * @is_uhbr: Whether the link has a 128b/132b channel coding
+ *
+ * Return the channel coding efficiency of the given DP link type, which is
+ * either 8b/10b or 128b/132b (aka UHBR). The corresponding overhead includes
+ * the 8b -> 10b, 128b -> 132b pixel data to link symbol conversion overhead
+ * and for 128b/132b any link or PHY level control symbol insertion overhead
+ * (LLCP, FEC, PHY sync, see DP Standard v2.1 3.5.2.18). For 8b/10b the
+ * corresponding FEC overhead is BW allocation specific, included in the value
+ * returned by drm_dp_bw_overhead().
+ *
+ * Returns the efficiency in the 100%/coding-overhead% ratio in
+ * 1ppm units.
+ */
+int drm_dp_bw_channel_coding_efficiency(bool is_uhbr)
+{
+	if (is_uhbr)
+		return 967100;
+	else
+		/*
+		 * Note that on 8b/10b MST the efficiency is only
+		 * 78.75% due to the 1 out of 64 MTPH packet overhead,
+		 * not accounted for here.
+		 */
+		return 800000;
+}
+EXPORT_SYMBOL(drm_dp_bw_channel_coding_efficiency);
diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
index 772b00ebd..f7c6b6062 100644
--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -43,6 +43,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_fixed.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 
@@ -3578,16 +3579,26 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
  * value is in units of PBNs/(timeslots/1 MTP). This value can be used to
  * convert the number of PBNs required for a given stream to the number of
  * timeslots this stream requires in each MTP.
+ *
+ * Returns the BW / timeslot value in 20.12 fixed point format.
  */
-int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
-			     int link_rate, int link_lane_count)
+fixed20_12 drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
+				    int link_rate, int link_lane_count)
 {
+	int ch_coding_efficiency =
+		drm_dp_bw_channel_coding_efficiency(drm_dp_is_uhbr_rate(link_rate));
+	fixed20_12 ret;
+
 	if (link_rate == 0 || link_lane_count == 0)
 		drm_dbg_kms(mgr->dev, "invalid link rate/lane count: (%d / %d)\n",
 			    link_rate, link_lane_count);
 
-	/* See DP v2.0 2.6.4.2, VCPayload_Bandwidth_for_OneTimeSlotPer_MTP_Allocation */
-	return link_rate * link_lane_count / 54000;
+	/* See DP v2.0 2.6.4.2, 2.7.6.3 VCPayload_Bandwidth_for_OneTimeSlotPer_MTP_Allocation */
+	ret.full = DIV_ROUND_DOWN_ULL(mul_u32_u32(link_rate * link_lane_count,
+						  ch_coding_efficiency),
+				      (1000000ULL * 8 * 5400) >> 12);
+
+	return ret;
 }
 EXPORT_SYMBOL(drm_dp_get_vc_payload_bw);
 
@@ -4335,7 +4346,7 @@ int drm_dp_atomic_find_time_slots(struct drm_atomic_state *state,
 		}
 	}
 
-	req_slots = DIV_ROUND_UP(pbn, topology_state->pbn_div);
+	req_slots = DIV_ROUND_UP(dfixed_const(pbn), topology_state->pbn_div.full);
 
 	drm_dbg_atomic(mgr->dev, "[CONNECTOR:%d:%s] [MST PORT:%p] TU %d -> %d\n",
 		       port->connector->base.id, port->connector->name,
@@ -4726,17 +4737,28 @@ EXPORT_SYMBOL(drm_dp_check_act_status);
 int drm_dp_calc_pbn_mode(int clock, int bpp)
 {
 	/*
-	 * margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
 	 * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
 	 * common multiplier to render an integer PBN for all link rate/lane
 	 * counts combinations
 	 * calculate
-	 * peak_kbps *= (1006/1000)
-	 * peak_kbps *= (64/54)
-	 * peak_kbps *= 8    convert to bytes
+	 * peak_kbps = clock * bpp / 16
+	 * peak_kbps *= SSC overhead / 1000000
+	 * peak_kbps /= 8    convert to Kbytes
+	 * peak_kBps *= (64/54) / 1000    convert to PBN
+	 */
+	/*
+	 * TODO: Use the actual link and mode parameters to calculate
+	 * the overhead. For now it's assumed that these are
+	 * 4 link lanes, 4096 hactive pixels, which don't add any
+	 * significant data padding overhead and that there is no DSC
+	 * or FEC overhead.
 	 */
-	return DIV_ROUND_UP_ULL(mul_u32_u32(clock * bpp, 64 * 1006 >> 4),
-				1000 * 8 * 54 * 1000);
+	int overhead = drm_dp_bw_overhead(4, 4096, 0, bpp,
+					  DRM_DP_BW_OVERHEAD_MST |
+					  DRM_DP_BW_OVERHEAD_SSC_REF_CLK);
+
+	return DIV64_U64_ROUND_UP(mul_u32_u32(clock * bpp, 64 * overhead >> 4),
+				  1000000ULL * 8 * 54 * 1000);
 }
 EXPORT_SYMBOL(drm_dp_calc_pbn_mode);
 
@@ -4861,7 +4883,8 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
 	state = to_drm_dp_mst_topology_state(mgr->base.state);
 	seq_printf(m, "\n*** Atomic state info ***\n");
 	seq_printf(m, "payload_mask: %x, max_payloads: %d, start_slot: %u, pbn_div: %d\n",
-		   state->payload_mask, mgr->max_payloads, state->start_slot, state->pbn_div);
+		   state->payload_mask, mgr->max_payloads, state->start_slot,
+		   dfixed_trunc(state->pbn_div));
 
 	seq_printf(m, "\n| idx | port | vcpi | slots | pbn | dsc | status |     sink name     |\n");
 	for (i = 0; i < mgr->max_payloads; i++) {
@@ -5126,13 +5149,67 @@ static bool drm_dp_mst_port_downstream_of_branch(struct drm_dp_mst_port *port,
 	return false;
 }
 
+static bool
+drm_dp_mst_port_downstream_of_parent_locked(struct drm_dp_mst_topology_mgr *mgr,
+					    struct drm_dp_mst_port *port,
+					    struct drm_dp_mst_port *parent)
+{
+	if (!mgr->mst_primary)
+		return false;
+
+	port = drm_dp_mst_topology_get_port_validated_locked(mgr->mst_primary,
+							     port);
+	if (!port)
+		return false;
+
+	if (!parent)
+		return true;
+
+	parent = drm_dp_mst_topology_get_port_validated_locked(mgr->mst_primary,
+							       parent);
+	if (!parent)
+		return false;
+
+	if (!parent->mstb)
+		return false;
+
+	return drm_dp_mst_port_downstream_of_branch(port, parent->mstb);
+}
+
+/**
+ * drm_dp_mst_port_downstream_of_parent - check if a port is downstream of a parent port
+ * @mgr: MST topology manager
+ * @port: the port being looked up
+ * @parent: the parent port
+ *
+ * The function returns %true if @port is downstream of @parent. If @parent is
+ * %NULL - denoting the root port - the function returns %true if @port is in
+ * @mgr's topology.
+ */
+bool
+drm_dp_mst_port_downstream_of_parent(struct drm_dp_mst_topology_mgr *mgr,
+				     struct drm_dp_mst_port *port,
+				     struct drm_dp_mst_port *parent)
+{
+	bool ret;
+
+	mutex_lock(&mgr->lock);
+	ret = drm_dp_mst_port_downstream_of_parent_locked(mgr, port, parent);
+	mutex_unlock(&mgr->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_dp_mst_port_downstream_of_parent);
+
 static int
 drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port,
-				      struct drm_dp_mst_topology_state *state);
+				      struct drm_dp_mst_topology_state *state,
+				      struct drm_dp_mst_port **failing_port);
 
 static int
 drm_dp_mst_atomic_check_mstb_bw_limit(struct drm_dp_mst_branch *mstb,
-				      struct drm_dp_mst_topology_state *state)
+				      struct drm_dp_mst_topology_state *state,
+				      struct drm_dp_mst_port **failing_port)
 {
 	struct drm_dp_mst_atomic_payload *payload;
 	struct drm_dp_mst_port *port;
@@ -5161,7 +5238,7 @@ drm_dp_mst_atomic_check_mstb_bw_limit(struct drm_dp_mst_branch *mstb,
 		drm_dbg_atomic(mstb->mgr->dev, "[MSTB:%p] Checking bandwidth limits\n", mstb);
 
 	list_for_each_entry(port, &mstb->ports, next) {
-		ret = drm_dp_mst_atomic_check_port_bw_limit(port, state);
+		ret = drm_dp_mst_atomic_check_port_bw_limit(port, state, failing_port);
 		if (ret < 0)
 			return ret;
 
@@ -5173,7 +5250,8 @@ drm_dp_mst_atomic_check_mstb_bw_limit(struct drm_dp_mst_branch *mstb,
 
 static int
 drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port,
-				      struct drm_dp_mst_topology_state *state)
+				      struct drm_dp_mst_topology_state *state,
+				      struct drm_dp_mst_port **failing_port)
 {
 	struct drm_dp_mst_atomic_payload *payload;
 	int pbn_used = 0;
@@ -5194,13 +5272,15 @@ drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port,
 			drm_dbg_atomic(port->mgr->dev,
 				       "[MSTB:%p] [MST PORT:%p] no BW available for the port\n",
 				       port->parent, port);
+			*failing_port = port;
 			return -EINVAL;
 		}
 
 		pbn_used = payload->pbn;
 	} else {
 		pbn_used = drm_dp_mst_atomic_check_mstb_bw_limit(port->mstb,
-								 state);
+								 state,
+								 failing_port);
 		if (pbn_used <= 0)
 			return pbn_used;
 	}
@@ -5209,6 +5289,7 @@ drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port,
 		drm_dbg_atomic(port->mgr->dev,
 			       "[MSTB:%p] [MST PORT:%p] required PBN of %d exceeds port limit of %d\n",
 			       port->parent, port, pbn_used, port->full_pbn);
+		*failing_port = port;
 		return -ENOSPC;
 	}
 
@@ -5261,10 +5342,10 @@ drm_dp_mst_atomic_check_payload_alloc_limits(struct drm_dp_mst_topology_mgr *mgr
 	}
 
 	if (!payload_count)
-		mst_state->pbn_div = 0;
+		mst_state->pbn_div.full = dfixed_const(0);
 
 	drm_dbg_atomic(mgr->dev, "[MST MGR:%p] mst state %p TU pbn_div=%d avail=%d used=%d\n",
-		       mgr, mst_state, mst_state->pbn_div, avail_slots,
+		       mgr, mst_state, dfixed_trunc(mst_state->pbn_div), avail_slots,
 		       mst_state->total_avail_slots - avail_slots);
 
 	return 0;
@@ -5387,19 +5468,83 @@ int drm_dp_mst_atomic_enable_dsc(struct drm_atomic_state *state,
 EXPORT_SYMBOL(drm_dp_mst_atomic_enable_dsc);
 
 /**
+ * drm_dp_mst_atomic_check_mgr - Check the atomic state of an MST topology manager
+ * @state: The global atomic state
+ * @mgr: Manager to check
+ * @mst_state: The MST atomic state for @mgr
+ * @failing_port: Returns the port with a BW limitation
+ *
+ * Checks the given MST manager's topology state for an atomic update to ensure
+ * that it's valid. This includes checking whether there's enough bandwidth to
+ * support the new timeslot allocations in the atomic update.
+ *
+ * Any atomic drivers supporting DP MST must make sure to call this or
+ * the drm_dp_mst_atomic_check() function after checking the rest of their state
+ * in their &drm_mode_config_funcs.atomic_check() callback.
+ *
+ * See also:
+ * drm_dp_mst_atomic_check()
+ * drm_dp_atomic_find_time_slots()
+ * drm_dp_atomic_release_time_slots()
+ *
+ * Returns:
+ *   - 0 if the new state is valid
+ *   - %-ENOSPC, if the new state is invalid, because of BW limitation
+ *         @failing_port is set to:
+ *
+ *         - The non-root port where a BW limit check failed
+ *           with all the ports downstream of @failing_port passing
+ *           the BW limit check.
+ *           The returned port pointer is valid until at least
+ *           one payload downstream of it exists.
+ *         - %NULL if the BW limit check failed at the root port
+ *           with all the ports downstream of the root port passing
+ *           the BW limit check.
+ *
+ *   - %-EINVAL, if the new state is invalid, because the root port has
+ *     too many payloads.
+ */
+int drm_dp_mst_atomic_check_mgr(struct drm_atomic_state *state,
+				struct drm_dp_mst_topology_mgr *mgr,
+				struct drm_dp_mst_topology_state *mst_state,
+				struct drm_dp_mst_port **failing_port)
+{
+	int ret;
+
+	*failing_port = NULL;
+
+	if (!mgr->mst_state)
+		return 0;
+
+	mutex_lock(&mgr->lock);
+	ret = drm_dp_mst_atomic_check_mstb_bw_limit(mgr->mst_primary,
+						    mst_state,
+						    failing_port);
+	mutex_unlock(&mgr->lock);
+
+	if (ret < 0)
+		return ret;
+
+	return drm_dp_mst_atomic_check_payload_alloc_limits(mgr, mst_state);
+}
+EXPORT_SYMBOL(drm_dp_mst_atomic_check_mgr);
+
+/**
  * drm_dp_mst_atomic_check - Check that the new state of an MST topology in an
  * atomic update is valid
  * @state: Pointer to the new &struct drm_dp_mst_topology_state
  *
  * Checks the given topology state for an atomic update to ensure that it's
- * valid. This includes checking whether there's enough bandwidth to support
- * the new timeslot allocations in the atomic update.
+ * valid, calling drm_dp_mst_atomic_check_mgr() for all MST manager in the
+ * atomic state. This includes checking whether there's enough bandwidth to
+ * support the new timeslot allocations in the atomic update.
  *
  * Any atomic drivers supporting DP MST must make sure to call this after
  * checking the rest of their state in their
  * &drm_mode_config_funcs.atomic_check() callback.
  *
  * See also:
+ * drm_dp_mst_atomic_check_mgr()
  * drm_dp_atomic_find_time_slots()
  * drm_dp_atomic_release_time_slots()
  *
@@ -5414,21 +5559,11 @@ int drm_dp_mst_atomic_check(struct drm_atomic_state *state)
 	int i, ret = 0;
 
 	for_each_new_mst_mgr_in_state(state, mgr, mst_state, i) {
-		if (!mgr->mst_state)
-			continue;
+		struct drm_dp_mst_port *tmp_port;
 
-		ret = drm_dp_mst_atomic_check_payload_alloc_limits(mgr, mst_state);
+		ret = drm_dp_mst_atomic_check_mgr(state, mgr, mst_state, &tmp_port);
 		if (ret)
 			break;
-
-		mutex_lock(&mgr->lock);
-		ret = drm_dp_mst_atomic_check_mstb_bw_limit(mgr->mst_primary,
-							    mst_state);
-		mutex_unlock(&mgr->lock);
-		if (ret < 0)
-			break;
-		else
-			ret = 0;
 	}
 
 	return ret;
@@ -5793,7 +5928,6 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port)
 	aux->ddc.algo_data = aux;
 	aux->ddc.retries = 3;
 
-	aux->ddc.class = I2C_CLASS_DDC;
 	aux->ddc.owner = THIS_MODULE;
 	/* FIXME: set the kdev of the port's connector as parent */
 	aux->ddc.dev.parent = parent_dev;
@@ -5884,6 +6018,7 @@ static bool drm_dp_mst_is_virtual_dpcd(struct drm_dp_mst_port *port)
 struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
 {
 	struct drm_dp_mst_port *immediate_upstream_port;
+	struct drm_dp_aux *immediate_upstream_aux;
 	struct drm_dp_mst_port *fec_port;
 	struct drm_dp_desc desc = {};
 	u8 endpoint_fec;
@@ -5948,21 +6083,25 @@ struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
 	 * - Port is on primary branch device
 	 * - Not a VGA adapter (DP_DWN_STRM_PORT_TYPE_ANALOG)
 	 */
-	if (drm_dp_read_desc(port->mgr->aux, &desc, true))
+	if (immediate_upstream_port)
+		immediate_upstream_aux = &immediate_upstream_port->aux;
+	else
+		immediate_upstream_aux = port->mgr->aux;
+
+	if (drm_dp_read_desc(immediate_upstream_aux, &desc, true))
 		return NULL;
 
-	if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) &&
-	    port->mgr->dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14 &&
-	    port->parent == port->mgr->mst_primary) {
+	if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD)) {
 		u8 dpcd_ext[DP_RECEIVER_CAP_SIZE];
 
-		if (drm_dp_read_dpcd_caps(port->mgr->aux, dpcd_ext) < 0)
+		if (drm_dp_read_dpcd_caps(immediate_upstream_aux, dpcd_ext) < 0)
 			return NULL;
 
-		if ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT) &&
+		if (dpcd_ext[DP_DPCD_REV] >= DP_DPCD_REV_14 &&
+		    ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT) &&
 		    ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK)
-		     != DP_DWN_STRM_PORT_TYPE_ANALOG))
-			return port->mgr->aux;
+		     != DP_DWN_STRM_PORT_TYPE_ANALOG)))
+			return immediate_upstream_aux;
 	}
 
 	/*