diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c')
-rw-r--r-- | drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c | 435 |
1 files changed, 435 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c b/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c new file mode 100644 index 0000000000..90098b753e --- /dev/null +++ b/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BOE BF060Y8M-AJ0 5.99" MIPI-DSI OLED Panel on SW43404 DriverIC + * + * Copyright (c) 2020 AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <video/mipi_display.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define DCS_ALLOW_HBM_RANGE 0x0c +#define DCS_DISALLOW_HBM_RANGE 0x08 + +enum boe_bf060y8m_aj0_supplies { + BF060Y8M_VREG_VCC, + BF060Y8M_VREG_VDDIO, + BF060Y8M_VREG_VCI, + BF060Y8M_VREG_EL_VDD, + BF060Y8M_VREG_EL_VSS, + BF060Y8M_VREG_MAX +}; + +struct boe_bf060y8m_aj0 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct regulator_bulk_data vregs[BF060Y8M_VREG_MAX]; + struct gpio_desc *reset_gpio; + bool prepared; +}; + +static inline +struct boe_bf060y8m_aj0 *to_boe_bf060y8m_aj0(struct drm_panel *panel) +{ + return container_of(panel, struct boe_bf060y8m_aj0, panel); +} + +static void boe_bf060y8m_aj0_reset(struct boe_bf060y8m_aj0 *boe) +{ + gpiod_set_value_cansleep(boe->reset_gpio, 0); + usleep_range(2000, 3000); + gpiod_set_value_cansleep(boe->reset_gpio, 1); + usleep_range(15000, 16000); + gpiod_set_value_cansleep(boe->reset_gpio, 0); + usleep_range(5000, 6000); +} + +static int boe_bf060y8m_aj0_on(struct boe_bf060y8m_aj0 *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + struct device *dev = &dsi->dev; + int ret; + + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00); + mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x4c); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_3D_CONTROL, 0x10); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, DCS_ALLOW_HBM_RANGE); + mipi_dsi_dcs_write_seq(dsi, 0xf8, + 0x00, 0x08, 0x10, 0x00, 0x22, 0x00, 0x00, 0x2d); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(30); + + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00); + mipi_dsi_dcs_write_seq(dsi, 0xc0, + 0x08, 0x48, 0x65, 0x33, 0x33, 0x33, + 0x2a, 0x31, 0x39, 0x20, 0x09); + mipi_dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x00, 0x00, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f); + mipi_dsi_dcs_write_seq(dsi, 0xe2, 0x20, 0x04, 0x10, 0x12, 0x92, + 0x4f, 0x8f, 0x44, 0x84, 0x83, 0x83, 0x83, + 0x5c, 0x5c, 0x5c); + mipi_dsi_dcs_write_seq(dsi, 0xde, 0x01, 0x2c, 0x00, 0x77, 0x3e); + + msleep(30); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + msleep(50); + + return 0; +} + +static int boe_bf060y8m_aj0_off(struct boe_bf060y8m_aj0 *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + struct device *dev = &dsi->dev; + int ret; + + /* OFF commands sent in HS mode */ + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + msleep(20); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + usleep_range(1000, 2000); + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return 0; +} + +static int boe_bf060y8m_aj0_prepare(struct drm_panel *panel) +{ + struct boe_bf060y8m_aj0 *boe = to_boe_bf060y8m_aj0(panel); + struct device *dev = &boe->dsi->dev; + int ret; + + if (boe->prepared) + return 0; + + /* + * Enable EL Driving Voltage first - doing that at the beginning + * or at the end of the power sequence doesn't matter, so enable + * it here to avoid yet another usleep at the end. + */ + ret = regulator_enable(boe->vregs[BF060Y8M_VREG_EL_VDD].consumer); + if (ret) + return ret; + ret = regulator_enable(boe->vregs[BF060Y8M_VREG_EL_VSS].consumer); + if (ret) + goto err_elvss; + + ret = regulator_enable(boe->vregs[BF060Y8M_VREG_VCC].consumer); + if (ret) + goto err_vcc; + usleep_range(1000, 2000); + ret = regulator_enable(boe->vregs[BF060Y8M_VREG_VDDIO].consumer); + if (ret) + goto err_vddio; + usleep_range(500, 1000); + ret = regulator_enable(boe->vregs[BF060Y8M_VREG_VCI].consumer); + if (ret) + goto err_vci; + usleep_range(2000, 3000); + + boe_bf060y8m_aj0_reset(boe); + + ret = boe_bf060y8m_aj0_on(boe); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(boe->reset_gpio, 1); + return ret; + } + + boe->prepared = true; + return 0; + +err_vci: + regulator_disable(boe->vregs[BF060Y8M_VREG_VDDIO].consumer); +err_vddio: + regulator_disable(boe->vregs[BF060Y8M_VREG_VCC].consumer); +err_vcc: + regulator_disable(boe->vregs[BF060Y8M_VREG_EL_VSS].consumer); +err_elvss: + regulator_disable(boe->vregs[BF060Y8M_VREG_EL_VDD].consumer); + return ret; +} + +static int boe_bf060y8m_aj0_unprepare(struct drm_panel *panel) +{ + struct boe_bf060y8m_aj0 *boe = to_boe_bf060y8m_aj0(panel); + struct device *dev = &boe->dsi->dev; + int ret; + + if (!boe->prepared) + return 0; + + ret = boe_bf060y8m_aj0_off(boe); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(boe->reset_gpio, 1); + ret = regulator_bulk_disable(ARRAY_SIZE(boe->vregs), boe->vregs); + + boe->prepared = false; + return 0; +} + +static const struct drm_display_mode boe_bf060y8m_aj0_mode = { + .clock = 165268, + .hdisplay = 1080, + .hsync_start = 1080 + 36, + .hsync_end = 1080 + 36 + 24, + .htotal = 1080 + 36 + 24 + 96, + .vdisplay = 2160, + .vsync_start = 2160 + 16, + .vsync_end = 2160 + 16 + 1, + .vtotal = 2160 + 16 + 1 + 15, + .width_mm = 68, /* 68.04 mm */ + .height_mm = 136, /* 136.08 mm */ +}; + +static int boe_bf060y8m_aj0_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &boe_bf060y8m_aj0_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs boe_bf060y8m_aj0_panel_funcs = { + .prepare = boe_bf060y8m_aj0_prepare, + .unprepare = boe_bf060y8m_aj0_unprepare, + .get_modes = boe_bf060y8m_aj0_get_modes, +}; + +static int boe_bf060y8m_aj0_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int ret; + + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness); + if (ret < 0) + return ret; + + return 0; +} + +static int boe_bf060y8m_aj0_bl_get_brightness(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness; + int ret; + + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness); + if (ret < 0) + return ret; + + return brightness & 0xff; +} + +static const struct backlight_ops boe_bf060y8m_aj0_bl_ops = { + .update_status = boe_bf060y8m_aj0_bl_update_status, + .get_brightness = boe_bf060y8m_aj0_bl_get_brightness, +}; + +static struct backlight_device * +boe_bf060y8m_aj0_create_backlight(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct backlight_properties props = { + .type = BACKLIGHT_RAW, + .brightness = 127, + .max_brightness = 255, + .scale = BACKLIGHT_SCALE_NON_LINEAR, + }; + + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, + &boe_bf060y8m_aj0_bl_ops, &props); +} + +static int boe_bf060y8m_aj0_init_vregs(struct boe_bf060y8m_aj0 *boe, + struct device *dev) +{ + struct regulator *vreg; + int ret; + + boe->vregs[BF060Y8M_VREG_VCC].supply = "vcc"; + boe->vregs[BF060Y8M_VREG_VDDIO].supply = "vddio"; + boe->vregs[BF060Y8M_VREG_VCI].supply = "vci"; + boe->vregs[BF060Y8M_VREG_EL_VDD].supply = "elvdd"; + boe->vregs[BF060Y8M_VREG_EL_VSS].supply = "elvss"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(boe->vregs), + boe->vregs); + if (ret < 0) { + dev_err(dev, "Failed to get regulators: %d\n", ret); + return ret; + } + + vreg = boe->vregs[BF060Y8M_VREG_VCC].consumer; + ret = regulator_is_supported_voltage(vreg, 2700000, 3600000); + if (!ret) + return ret; + + vreg = boe->vregs[BF060Y8M_VREG_VDDIO].consumer; + ret = regulator_is_supported_voltage(vreg, 1620000, 1980000); + if (!ret) + return ret; + + vreg = boe->vregs[BF060Y8M_VREG_VCI].consumer; + ret = regulator_is_supported_voltage(vreg, 2600000, 3600000); + if (!ret) + return ret; + + vreg = boe->vregs[BF060Y8M_VREG_EL_VDD].consumer; + ret = regulator_is_supported_voltage(vreg, 4400000, 4800000); + if (!ret) + return ret; + + /* ELVSS is negative: -5.00V to -1.40V */ + vreg = boe->vregs[BF060Y8M_VREG_EL_VSS].consumer; + ret = regulator_is_supported_voltage(vreg, 1400000, 5000000); + if (!ret) + return ret; + + /* + * Set min/max rated current, known only for VCI and VDDIO and, + * in case of failure, just go on gracefully, as this step is not + * guaranteed to succeed on all regulator HW but do a debug print + * to inform the developer during debugging. + * In any case, these two supplies are also optional, so they may + * be fixed-regulator which, at the time of writing, does not + * support fake current limiting. + */ + vreg = boe->vregs[BF060Y8M_VREG_VDDIO].consumer; + ret = regulator_set_current_limit(vreg, 1500, 2500); + if (ret) + dev_dbg(dev, "Current limit cannot be set on %s: %d\n", + boe->vregs[1].supply, ret); + + vreg = boe->vregs[BF060Y8M_VREG_VCI].consumer; + ret = regulator_set_current_limit(vreg, 20000, 40000); + if (ret) + dev_dbg(dev, "Current limit cannot be set on %s: %d\n", + boe->vregs[2].supply, ret); + + return 0; +} + +static int boe_bf060y8m_aj0_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct boe_bf060y8m_aj0 *boe; + int ret; + + boe = devm_kzalloc(dev, sizeof(*boe), GFP_KERNEL); + if (!boe) + return -ENOMEM; + + ret = boe_bf060y8m_aj0_init_vregs(boe, dev); + if (ret) + return dev_err_probe(dev, ret, + "Failed to initialize supplies.\n"); + + boe->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); + if (IS_ERR(boe->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(boe->reset_gpio), + "Failed to get reset-gpios\n"); + + boe->dsi = dsi; + mipi_dsi_set_drvdata(dsi, boe); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_CLOCK_NON_CONTINUOUS | + MIPI_DSI_MODE_LPM; + + drm_panel_init(&boe->panel, dev, &boe_bf060y8m_aj0_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + boe->panel.backlight = boe_bf060y8m_aj0_create_backlight(dsi); + if (IS_ERR(boe->panel.backlight)) + return dev_err_probe(dev, PTR_ERR(boe->panel.backlight), + "Failed to create backlight\n"); + + drm_panel_add(&boe->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); + return ret; + } + + return 0; +} + +static void boe_bf060y8m_aj0_remove(struct mipi_dsi_device *dsi) +{ + struct boe_bf060y8m_aj0 *boe = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&boe->panel); +} + +static const struct of_device_id boe_bf060y8m_aj0_of_match[] = { + { .compatible = "boe,bf060y8m-aj0" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, boe_bf060y8m_aj0_of_match); + +static struct mipi_dsi_driver boe_bf060y8m_aj0_driver = { + .probe = boe_bf060y8m_aj0_probe, + .remove = boe_bf060y8m_aj0_remove, + .driver = { + .name = "panel-sw43404-boe-fhd-amoled", + .of_match_table = boe_bf060y8m_aj0_of_match, + }, +}; +module_mipi_dsi_driver(boe_bf060y8m_aj0_driver); + +MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>"); +MODULE_DESCRIPTION("BOE BF060Y8M-AJ0 MIPI-DSI OLED panel"); +MODULE_LICENSE("GPL v2"); |