Adding upstream version 6.10.3.upstream/6.10.3

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 101 insertions, 54 deletions

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 745f3e48f0..6db277efcb 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -210,15 +210,12 @@ struct panel_desc {
  * struct edp_panel_entry - Maps panel ID to delay / panel name.
  */
 struct edp_panel_entry {
-	/** @panel_id: 32-bit ID for panel, encoded with drm_edid_encode_panel_id(). */
-	u32 panel_id;
+	/** @ident: edid identity used for panel matching. */
+	const struct drm_edid_ident ident;
 
 	/** @delay: The power sequencing delays needed for this panel. */
 	const struct panel_delay *delay;
 
-	/** @name: Name of this panel (for printing to logs). */
-	const char *name;
-
 	/** @override_edid_mode: Override the mode obtained by edid. */
 	const struct drm_display_mode *override_edid_mode;
 };
@@ -245,7 +242,7 @@ struct panel_edp {
 
 	const struct edp_panel_entry *detected_panel;
 
-	struct edid *edid;
+	const struct drm_edid *drm_edid;
 
 	struct drm_display_mode override_mode;
 
@@ -620,13 +617,16 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 	if (p->ddc) {
 		pm_runtime_get_sync(panel->dev);
 
-		if (!p->edid)
-			p->edid = drm_get_edid(connector, p->ddc);
+		if (!p->drm_edid)
+			p->drm_edid = drm_edid_read_ddc(connector, p->ddc);
+
+		drm_edid_connector_update(connector, p->drm_edid);
+
 		/*
 		 * If both edid and hard-coded modes exists, skip edid modes to
 		 * avoid multiple preferred modes.
 		 */
-		if (p->edid && !has_hard_coded_modes) {
+		if (p->drm_edid && !has_hard_coded_modes) {
 			if (has_override_edid_mode) {
 				/*
 				 * override_edid_mode is specified. Use
@@ -635,7 +635,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 				num += panel_edp_override_edid_mode(p, connector,
 						p->detected_panel->override_edid_mode);
 			} else {
-				num += drm_add_edid_modes(connector, p->edid);
+				num += drm_edid_connector_add_modes(connector);
 			}
 		}
 
@@ -691,7 +691,7 @@ static int detected_panel_show(struct seq_file *s, void *data)
 	else if (!p->detected_panel)
 		seq_puts(s, "HARDCODED\n");
 	else
-		seq_printf(s, "%s\n", p->detected_panel->name);
+		seq_printf(s, "%s\n", p->detected_panel->ident.name);
 
 	return 0;
 }
@@ -761,11 +761,31 @@ static void panel_edp_parse_panel_timing_node(struct device *dev,
 		dev_err(dev, "Reject override mode: No display_timing found\n");
 }
 
-static const struct edp_panel_entry *find_edp_panel(u32 panel_id);
+static const struct edp_panel_entry *find_edp_panel(u32 panel_id, const struct drm_edid *edid);
+
+static void panel_edp_set_conservative_timings(struct panel_edp *panel, struct panel_desc *desc)
+{
+	/*
+	 * It's highly likely that the panel will work if we use very
+	 * conservative timings, so let's do that.
+	 *
+	 * Nearly all panels have a "unprepare" delay of 500 ms though
+	 * there are a few with 1000. Let's stick 2000 in just to be
+	 * super conservative.
+	 *
+	 * An "enable" delay of 80 ms seems the most common, but we'll
+	 * throw in 200 ms to be safe.
+	 */
+	desc->delay.unprepare = 2000;
+	desc->delay.enable = 200;
+
+	panel->detected_panel = ERR_PTR(-EINVAL);
+}
 
 static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 {
 	struct panel_desc *desc;
+	const struct drm_edid *base_block;
 	u32 panel_id;
 	char vend[4];
 	u16 product_id;
@@ -791,19 +811,26 @@ static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 	/* Power the panel on so we can read the EDID */
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		dev_err(dev, "Couldn't power on panel to read EDID: %d\n", ret);
+		dev_err(dev,
+			"Couldn't power on panel to ID it; using conservative timings: %d\n",
+			ret);
+		panel_edp_set_conservative_timings(panel, desc);
 		goto exit;
 	}
 
-	panel_id = drm_edid_get_panel_id(panel->ddc);
-	if (!panel_id) {
-		dev_err(dev, "Couldn't identify panel via EDID\n");
-		ret = -EIO;
+	base_block = drm_edid_read_base_block(panel->ddc);
+	if (base_block) {
+		panel_id = drm_edid_get_panel_id(base_block);
+	} else {
+		dev_err(dev, "Couldn't read EDID for ID; using conservative timings\n");
+		panel_edp_set_conservative_timings(panel, desc);
 		goto exit;
 	}
 	drm_edid_decode_panel_id(panel_id, vend, &product_id);
 
-	panel->detected_panel = find_edp_panel(panel_id);
+	panel->detected_panel = find_edp_panel(panel_id, base_block);
+
+	drm_edid_free(base_block);
 
 	/*
 	 * We're using non-optimized timings and want it really obvious that
@@ -814,40 +841,20 @@ static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 		dev_warn(dev,
 			 "Unknown panel %s %#06x, using conservative timings\n",
 			 vend, product_id);
-
-		/*
-		 * It's highly likely that the panel will work if we use very
-		 * conservative timings, so let's do that. We already know that
-		 * the HPD-related delays must have worked since we got this
-		 * far, so we really just need the "unprepare" / "enable"
-		 * delays. We don't need "prepare_to_enable" since that
-		 * overlaps the "enable" delay anyway.
-		 *
-		 * Nearly all panels have a "unprepare" delay of 500 ms though
-		 * there are a few with 1000. Let's stick 2000 in just to be
-		 * super conservative.
-		 *
-		 * An "enable" delay of 80 ms seems the most common, but we'll
-		 * throw in 200 ms to be safe.
-		 */
-		desc->delay.unprepare = 2000;
-		desc->delay.enable = 200;
-
-		panel->detected_panel = ERR_PTR(-EINVAL);
+		panel_edp_set_conservative_timings(panel, desc);
 	} else {
 		dev_info(dev, "Detected %s %s (%#06x)\n",
-			 vend, panel->detected_panel->name, product_id);
+			 vend, panel->detected_panel->ident.name, product_id);
 
 		/* Update the delay; everything else comes from EDID */
 		desc->delay = *panel->detected_panel->delay;
 	}
 
-	ret = 0;
 exit:
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
-	return ret;
+	return 0;
 }
 
 static int panel_edp_probe(struct device *dev, const struct panel_desc *desc,
@@ -940,8 +947,14 @@ static int panel_edp_probe(struct device *dev, const struct panel_desc *desc,
 		err = drm_panel_dp_aux_backlight(&panel->base, panel->aux);
 		pm_runtime_mark_last_busy(dev);
 		pm_runtime_put_autosuspend(dev);
+
+		/*
+		 * Warn if we get an error, but don't consider it fatal. Having
+		 * a panel where we can't control the backlight is better than
+		 * no panel.
+		 */
 		if (err)
-			goto err_finished_pm_runtime;
+			dev_warn(dev, "failed to register dp aux backlight: %d\n", err);
 	}
 
 	drm_panel_add(&panel->base);
@@ -971,8 +984,8 @@ static void panel_edp_remove(struct device *dev)
 	if (panel->ddc && (!panel->aux || panel->ddc != &panel->aux->ddc))
 		put_device(&panel->ddc->dev);
 
-	kfree(panel->edid);
-	panel->edid = NULL;
+	drm_edid_free(panel->drm_edid);
+	panel->drm_edid = NULL;
 }
 
 static void panel_edp_shutdown(struct device *dev)
@@ -1005,6 +1018,19 @@ static const struct panel_desc auo_b101ean01 = {
 	},
 };
 
+static const struct drm_display_mode auo_b116xa3_mode = {
+	.clock = 70589,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 40,
+	.htotal = 1366 + 40 + 40 + 32,
+	.vdisplay = 768,
+	.vsync_start = 768 + 10,
+	.vsync_end = 768 + 10 + 12,
+	.vtotal = 768 + 10 + 12 + 6,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
 static const struct drm_display_mode auo_b116xak01_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -1926,17 +1952,21 @@ static const struct panel_delay delay_200_500_e50_po2e200 = {
 
 #define EDP_PANEL_ENTRY(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name) \
 { \
-	.name = _name, \
-	.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
-					     product_id), \
+	.ident = { \
+		.name = _name, \
+		.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
+						     product_id), \
+	}, \
 	.delay = _delay \
 }
 
 #define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \
 { \
-	.name = _name, \
-	.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
-					     product_id), \
+	.ident = { \
+		.name = _name, \
+		.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
+						     product_id), \
+	}, \
 	.delay = _delay, \
 	.override_edid_mode = _mode \
 }
@@ -1960,7 +1990,9 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x239b, &delay_200_500_e50, "B116XAN06.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x255c, &delay_200_500_e50, "B116XTN02.5"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x403d, &delay_200_500_e50, "B140HAN04.0"),
-	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAN04.0"),
+	EDP_PANEL_ENTRY2('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0",
+			 &auo_b116xa3_mode),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x435c, &delay_200_500_e50, "Unknown"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
@@ -1968,6 +2000,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x723c, &delay_200_500_e50, "B140XTN07.2"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0xd497, &delay_200_500_e50, "B120XAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0xf390, &delay_200_500_e50, "B140XTN07.7"),
 
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0607, &delay_200_500_e200, "Unknown"),
@@ -2017,6 +2050,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b43, &delay_200_500_e200, "NV140FHM-T09"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b56, &delay_200_500_e80, "NT140FHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c20, &delay_200_500_e80, "NT140FHM-N47"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cb6, &delay_200_500_e200, "NT116WHM-N44"),
 
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1130, &delay_200_500_e50, "N116BGE-EB2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1132, &delay_200_500_e80_d50, "N116BGE-EA2"),
@@ -2032,6 +2066,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1156, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1157, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115b, &delay_200_500_e80_d50, "N116BCN-EB1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115e, &delay_200_500_e80_d50, "N116BCA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1247, &delay_200_500_e80_d50, "N120ACA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142b, &delay_200_500_e80_d50, "N140HCA-EAC"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142e, &delay_200_500_e80_d50, "N140BGA-EA4"),
@@ -2043,6 +2078,8 @@ static const struct edp_panel_entry edp_panels[] = {
 
 	EDP_PANEL_ENTRY('C', 'S', 'O', 0x1200, &delay_200_500_e50_p2e200, "MNC207QS1-1"),
 
+	EDP_PANEL_ENTRY('C', 'S', 'W', 0x1100, &delay_200_500_e80_d50, "MNB601LS1-1"),
+
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d51, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5b, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5c, &delay_200_500_e200, "MB116AN01-2"),
@@ -2083,15 +2120,25 @@ static const struct edp_panel_entry edp_panels[] = {
 	{ /* sentinal */ }
 };
 
-static const struct edp_panel_entry *find_edp_panel(u32 panel_id)
+static const struct edp_panel_entry *find_edp_panel(u32 panel_id, const struct drm_edid *edid)
 {
 	const struct edp_panel_entry *panel;
 
 	if (!panel_id)
 		return NULL;
 
-	for (panel = edp_panels; panel->panel_id; panel++)
-		if (panel->panel_id == panel_id)
+	/*
+	 * Match with identity first. This allows handling the case where
+	 * vendors incorrectly reused the same panel ID for multiple panels that
+	 * need different settings. If there's no match, try again with panel
+	 * ID, which should be unique.
+	 */
+	for (panel = edp_panels; panel->ident.panel_id; panel++)
+		if (drm_edid_match(edid, &panel->ident))
+			return panel;
+
+	for (panel = edp_panels; panel->ident.panel_id; panel++)
+		if (panel->ident.panel_id == panel_id)
 			return panel;
 
 	return NULL;