diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/gpu/drm/panel/panel-novatek-nt35510.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/gpu/drm/panel/panel-novatek-nt35510.c')
-rw-r--r-- | drivers/gpu/drm/panel/panel-novatek-nt35510.c | 1097 |
1 files changed, 1097 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c new file mode 100644 index 0000000000..d6dceb8580 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c @@ -0,0 +1,1097 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Novatek NT35510 panel driver + * Copyright (C) 2020 Linus Walleij <linus.walleij@linaro.org> + * Based on code by Robert Teather (C) 2012 Samsung + * + * This display driver (and I refer to the physical component NT35510, + * not this Linux kernel software driver) can handle: + * 480x864, 480x854, 480x800, 480x720 and 480x640 pixel displays. + * It has 480x840x24bit SRAM embedded for storing a frame. + * When powered on the display is by default in 480x800 mode. + * + * The actual panels using this component have different names, but + * the code needed to set up and configure the panel will be similar, + * so they should all use the NT35510 driver with appropriate configuration + * per-panel, e.g. for physical size. + * + * This driver is for the DSI interface to panels using the NT35510. + * + * The NT35510 can also use an RGB (DPI) interface combined with an + * I2C or SPI interface for setting up the NT35510. If this is needed + * this panel driver should be refactored to also support that use + * case. + */ +#include <linux/backlight.h> +#include <linux/bitops.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define MCS_CMD_MAUCCTR 0xF0 /* Manufacturer command enable */ +#define MCS_CMD_READ_ID1 0xDA +#define MCS_CMD_READ_ID2 0xDB +#define MCS_CMD_READ_ID3 0xDC +#define MCS_CMD_MTP_READ_SETTING 0xF8 /* Uncertain about name */ +#define MCS_CMD_MTP_READ_PARAM 0xFF /* Uncertain about name */ + +/* + * These manufacturer commands are available after we enable manufacturer + * command set (MCS) for page 0. + */ +#define NT35510_P0_DOPCTR 0xB1 +#define NT35510_P0_SDHDTCTR 0xB6 +#define NT35510_P0_GSEQCTR 0xB7 +#define NT35510_P0_SDEQCTR 0xB8 +#define NT35510_P0_SDVPCTR 0xBA +#define NT35510_P0_DPFRCTR1 0xBD +#define NT35510_P0_DPFRCTR2 0xBE +#define NT35510_P0_DPFRCTR3 0xBF +#define NT35510_P0_DPMCTR12 0xCC + +#define NT35510_P0_DOPCTR_LEN 2 +#define NT35510_P0_GSEQCTR_LEN 2 +#define NT35510_P0_SDEQCTR_LEN 4 +#define NT35510_P0_SDVPCTR_LEN 1 +#define NT35510_P0_DPFRCTR1_LEN 5 +#define NT35510_P0_DPFRCTR2_LEN 5 +#define NT35510_P0_DPFRCTR3_LEN 5 +#define NT35510_P0_DPMCTR12_LEN 3 + +#define NT35510_DOPCTR_0_RAMKP BIT(7) /* Contents kept in sleep */ +#define NT35510_DOPCTR_0_DSITE BIT(6) /* Enable TE signal */ +#define NT35510_DOPCTR_0_DSIG BIT(5) /* Enable generic read/write */ +#define NT35510_DOPCTR_0_DSIM BIT(4) /* Enable video mode on DSI */ +#define NT35510_DOPCTR_0_EOTP BIT(3) /* Support EoTP */ +#define NT35510_DOPCTR_0_N565 BIT(2) /* RGB or BGR pixel format */ +#define NT35510_DOPCTR_1_TW_PWR_SEL BIT(4) /* TE power selector */ +#define NT35510_DOPCTR_1_CRGB BIT(3) /* RGB or BGR byte order */ +#define NT35510_DOPCTR_1_CTB BIT(2) /* Vertical scanning direction */ +#define NT35510_DOPCTR_1_CRL BIT(1) /* Source driver data shift */ +#define NT35510_P0_SDVPCTR_PRG BIT(2) /* 0 = normal operation, 1 = VGLO */ +#define NT35510_P0_SDVPCTR_AVDD 0 /* source driver output = AVDD */ +#define NT35510_P0_SDVPCTR_OFFCOL 1 /* source driver output = off color */ +#define NT35510_P0_SDVPCTR_AVSS 2 /* source driver output = AVSS */ +#define NT35510_P0_SDVPCTR_HI_Z 3 /* source driver output = High impedance */ + +/* + * These manufacturer commands are available after we enable manufacturer + * command set (MCS) for page 1. + */ +#define NT35510_P1_SETAVDD 0xB0 +#define NT35510_P1_SETAVEE 0xB1 +#define NT35510_P1_SETVCL 0xB2 +#define NT35510_P1_SETVGH 0xB3 +#define NT35510_P1_SETVRGH 0xB4 +#define NT35510_P1_SETVGL 0xB5 +#define NT35510_P1_BT1CTR 0xB6 +#define NT35510_P1_BT2CTR 0xB7 +#define NT35510_P1_BT3CTR 0xB8 +#define NT35510_P1_BT4CTR 0xB9 /* VGH boosting times/freq */ +#define NT35510_P1_BT5CTR 0xBA +#define NT35510_P1_PFMCTR 0xBB +#define NT35510_P1_SETVGP 0xBC +#define NT35510_P1_SETVGN 0xBD +#define NT35510_P1_SETVCMOFF 0xBE +#define NT35510_P1_VGHCTR 0xBF /* VGH output ctrl */ +#define NT35510_P1_SET_GAMMA_RED_POS 0xD1 +#define NT35510_P1_SET_GAMMA_GREEN_POS 0xD2 +#define NT35510_P1_SET_GAMMA_BLUE_POS 0xD3 +#define NT35510_P1_SET_GAMMA_RED_NEG 0xD4 +#define NT35510_P1_SET_GAMMA_GREEN_NEG 0xD5 +#define NT35510_P1_SET_GAMMA_BLUE_NEG 0xD6 + +/* AVDD and AVEE setting 3 bytes */ +#define NT35510_P1_AVDD_LEN 3 +#define NT35510_P1_AVEE_LEN 3 +#define NT35510_P1_VGH_LEN 3 +#define NT35510_P1_VGL_LEN 3 +#define NT35510_P1_VGP_LEN 3 +#define NT35510_P1_VGN_LEN 3 +/* BT1CTR thru BT5CTR setting 3 bytes */ +#define NT35510_P1_BT1CTR_LEN 3 +#define NT35510_P1_BT2CTR_LEN 3 +#define NT35510_P1_BT4CTR_LEN 3 +#define NT35510_P1_BT5CTR_LEN 3 +/* 52 gamma parameters times two per color: positive and negative */ +#define NT35510_P1_GAMMA_LEN 52 + +/** + * struct nt35510_config - the display-specific NT35510 configuration + * + * Some of the settings provide an array of bytes, A, B C which mean: + * A = normal / idle off mode + * B = idle on mode + * C = partial / idle off mode + * + * Gamma correction arrays are 10bit numbers, two consecutive bytes + * makes out one point on the gamma correction curve. The points are + * not linearly placed along the X axis, we get points 0, 1, 3, 5 + * 7, 11, 15, 23, 31, 47, 63, 95, 127, 128, 160, 192, 208, 224, 232, + * 240, 244, 248, 250, 252, 254, 255. The voltages tuples form + * V0, V1, V3 ... V255, with 0x0000 being the lowest voltage and + * 0x03FF being the highest voltage. + * + * Each value must be strictly higher than the previous value forming + * a rising curve like this: + * + * ^ + * | V255 + * | V254 + * | .... + * | V5 + * | V3 + * | V1 + * | V0 + * +-------------------------------------------> + * + * The details about all settings can be found in the NT35510 Application + * Note. + */ +struct nt35510_config { + /** + * @width_mm: physical panel width [mm] + */ + u32 width_mm; + /** + * @height_mm: physical panel height [mm] + */ + u32 height_mm; + /** + * @mode: the display mode. This is only relevant outside the panel + * in video mode: in command mode this is configuring the internal + * timing in the display controller. + */ + const struct drm_display_mode mode; + /** + * @avdd: setting for AVDD ranging from 0x00 = 6.5V to 0x14 = 4.5V + * in 0.1V steps the default is 0x05 which means 6.0V + */ + u8 avdd[NT35510_P1_AVDD_LEN]; + /** + * @bt1ctr: setting for boost power control for the AVDD step-up + * circuit (1) + * bits 0..2 in the lower nibble controls PCK, the booster clock + * frequency for the step-up circuit: + * 0 = Hsync/32 + * 1 = Hsync/16 + * 2 = Hsync/8 + * 3 = Hsync/4 + * 4 = Hsync/2 + * 5 = Hsync + * 6 = Hsync x 2 + * 7 = Hsync x 4 + * bits 4..6 in the upper nibble controls BTP, the boosting + * amplification for the step-up circuit: + * 0 = Disable + * 1 = 1.5 x VDDB + * 2 = 1.66 x VDDB + * 3 = 2 x VDDB + * 4 = 2.5 x VDDB + * 5 = 3 x VDDB + * The defaults are 4 and 4 yielding 0x44 + */ + u8 bt1ctr[NT35510_P1_BT1CTR_LEN]; + /** + * @avee: setting for AVEE ranging from 0x00 = -6.5V to 0x14 = -4.5V + * in 0.1V steps the default is 0x05 which means -6.0V + */ + u8 avee[NT35510_P1_AVEE_LEN]; + /** + * @bt2ctr: setting for boost power control for the AVEE step-up + * circuit (2) + * bits 0..2 in the lower nibble controls NCK, the booster clock + * frequency, the values are the same as for PCK in @bt1ctr. + * bits 4..5 in the upper nibble controls BTN, the boosting + * amplification for the step-up circuit. + * 0 = Disable + * 1 = -1.5 x VDDB + * 2 = -2 x VDDB + * 3 = -2.5 x VDDB + * 4 = -3 x VDDB + * The defaults are 4 and 3 yielding 0x34 + */ + u8 bt2ctr[NT35510_P1_BT2CTR_LEN]; + /** + * @vgh: setting for VGH ranging from 0x00 = 7.0V to 0x0B = 18.0V + * in 1V steps, the default is 0x08 which means 15V + */ + u8 vgh[NT35510_P1_VGH_LEN]; + /** + * @bt4ctr: setting for boost power control for the VGH step-up + * circuit (4) + * bits 0..2 in the lower nibble controls HCK, the booster clock + * frequency, the values are the same as for PCK in @bt1ctr. + * bits 4..5 in the upper nibble controls BTH, the boosting + * amplification for the step-up circuit. + * 0 = AVDD + VDDB + * 1 = AVDD - AVEE + * 2 = AVDD - AVEE + VDDB + * 3 = AVDD x 2 - AVEE + * The defaults are 4 and 3 yielding 0x34 + */ + u8 bt4ctr[NT35510_P1_BT4CTR_LEN]; + /** + * @vgl: setting for VGL ranging from 0x00 = -2V to 0x0f = -15V in + * 1V steps, the default is 0x08 which means -10V + */ + u8 vgl[NT35510_P1_VGL_LEN]; + /** + * @bt5ctr: setting for boost power control for the VGL step-up + * circuit (5) + * bits 0..2 in the lower nibble controls LCK, the booster clock + * frequency, the values are the same as for PCK in @bt1ctr. + * bits 4..5 in the upper nibble controls BTL, the boosting + * amplification for the step-up circuit. + * 0 = AVEE + VCL + * 1 = AVEE - AVDD + * 2 = AVEE + VCL - AVDD + * 3 = AVEE x 2 - AVDD + * The defaults are 3 and 2 yielding 0x32 + */ + u8 bt5ctr[NT35510_P1_BT5CTR_LEN]; + /** + * @vgp: setting for VGP, the positive gamma divider voltages + * VGMP the high voltage and VGSP the low voltage. + * The first byte contains bit 8 of VGMP and VGSP in bits 4 and 0 + * The second byte contains bit 0..7 of VGMP + * The third byte contains bit 0..7 of VGSP + * VGMP 0x00 = 3.0V .. 0x108 = 6.3V in steps of 12.5mV + * VGSP 0x00 = 0V .. 0x111 = 3.7V in steps of 12.5mV + */ + u8 vgp[NT35510_P1_VGP_LEN]; + /** + * @vgn: setting for VGN, the negative gamma divider voltages, + * same layout of bytes as @vgp. + */ + u8 vgn[NT35510_P1_VGN_LEN]; + /** + * @sdeqctr: Source driver control settings, first byte is + * 0 for mode 1 and 1 for mode 2. Mode 1 uses two steps and + * mode 2 uses three steps meaning EQS3 is not used in mode + * 1. Mode 2 is default. The last three parameters are EQS1, EQS2 + * and EQS3, setting the rise time for each equalizer step: + * 0x00 = 0.0 us to 0x0f = 7.5 us in steps of 0.5us. The default + * is 0x07 = 3.5 us. + */ + u8 sdeqctr[NT35510_P0_SDEQCTR_LEN]; + /** + * @sdvpctr: power/voltage behaviour during vertical porch time + */ + u8 sdvpctr; + /** + * @t1: the number of pixel clocks on one scanline, range + * 0x100 (258 ticks) .. 0x3FF (1024 ticks) so the value + 1 + * clock ticks. + */ + u16 t1; + /** + * @vbp: vertical back porch toward the PANEL note: not toward + * the DSI host; these are separate interfaces, in from DSI host + * and out to the panel. + */ + u8 vbp; + /** + * @vfp: vertical front porch toward the PANEL. + */ + u8 vfp; + /** + * @psel: pixel clock divisor: 0 = 1, 1 = 2, 2 = 4, 3 = 8. + */ + u8 psel; + /** + * @dpmctr12: Display timing control 12 + * Byte 1 bit 4 selects LVGL voltage level: 0 = VGLX, 1 = VGL_REG + * Byte 1 bit 1 selects gate signal mode: 0 = non-overlap, 1 = overlap + * Byte 1 bit 0 selects output signal control R/L swap, 0 = normal + * 1 = swap all O->E, L->R + * Byte 2 is CLW delay clock for CK O/E and CKB O/E signals: + * 0x00 = 0us .. 0xFF = 12.75us in 0.05us steps + * Byte 3 is FTI_H0 delay time for STP O/E signals: + * 0x00 = 0us .. 0xFF = 12.75us in 0.05us steps + */ + u8 dpmctr12[NT35510_P0_DPMCTR12_LEN]; + /** + * @gamma_corr_pos_r: Red gamma correction parameters, positive + */ + u8 gamma_corr_pos_r[NT35510_P1_GAMMA_LEN]; + /** + * @gamma_corr_pos_g: Green gamma correction parameters, positive + */ + u8 gamma_corr_pos_g[NT35510_P1_GAMMA_LEN]; + /** + * @gamma_corr_pos_b: Blue gamma correction parameters, positive + */ + u8 gamma_corr_pos_b[NT35510_P1_GAMMA_LEN]; + /** + * @gamma_corr_neg_r: Red gamma correction parameters, negative + */ + u8 gamma_corr_neg_r[NT35510_P1_GAMMA_LEN]; + /** + * @gamma_corr_neg_g: Green gamma correction parameters, negative + */ + u8 gamma_corr_neg_g[NT35510_P1_GAMMA_LEN]; + /** + * @gamma_corr_neg_b: Blue gamma correction parameters, negative + */ + u8 gamma_corr_neg_b[NT35510_P1_GAMMA_LEN]; +}; + +/** + * struct nt35510 - state container for the NT35510 panel + */ +struct nt35510 { + /** + * @dev: the container device + */ + struct device *dev; + /** + * @conf: the specific panel configuration, as the NT35510 + * can be combined with many physical panels, they can have + * different physical dimensions and gamma correction etc, + * so this is stored in the config. + */ + const struct nt35510_config *conf; + /** + * @panel: the DRM panel object for the instance + */ + struct drm_panel panel; + /** + * @supplies: regulators supplying the panel + */ + struct regulator_bulk_data supplies[2]; + /** + * @reset_gpio: the reset line + */ + struct gpio_desc *reset_gpio; +}; + +/* Manufacturer command has strictly this byte sequence */ +static const u8 nt35510_mauc_mtp_read_param[] = { 0xAA, 0x55, 0x25, 0x01 }; +static const u8 nt35510_mauc_mtp_read_setting[] = { 0x01, 0x02, 0x00, 0x20, + 0x33, 0x13, 0x00, 0x40, + 0x00, 0x00, 0x23, 0x02 }; +static const u8 nt35510_mauc_select_page_0[] = { 0x55, 0xAA, 0x52, 0x08, 0x00 }; +static const u8 nt35510_mauc_select_page_1[] = { 0x55, 0xAA, 0x52, 0x08, 0x01 }; +static const u8 nt35510_vgh_on[] = { 0x01 }; + +static inline struct nt35510 *panel_to_nt35510(struct drm_panel *panel) +{ + return container_of(panel, struct nt35510, panel); +} + +#define NT35510_ROTATE_0_SETTING 0x02 +#define NT35510_ROTATE_180_SETTING 0x00 + +static int nt35510_send_long(struct nt35510 *nt, struct mipi_dsi_device *dsi, + u8 cmd, u8 cmdlen, const u8 *seq) +{ + const u8 *seqp = seq; + int cmdwritten = 0; + int chunk = cmdlen; + int ret; + + if (chunk > 15) + chunk = 15; + ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk); + if (ret < 0) { + dev_err(nt->dev, "error sending DCS command seq cmd %02x\n", cmd); + return ret; + } + cmdwritten += chunk; + seqp += chunk; + + while (cmdwritten < cmdlen) { + chunk = cmdlen - cmdwritten; + if (chunk > 15) + chunk = 15; + ret = mipi_dsi_generic_write(dsi, seqp, chunk); + if (ret < 0) { + dev_err(nt->dev, "error sending generic write seq %02x\n", cmd); + return ret; + } + cmdwritten += chunk; + seqp += chunk; + } + dev_dbg(nt->dev, "sent command %02x %02x bytes\n", cmd, cmdlen); + return 0; +} + +static int nt35510_read_id(struct nt35510 *nt) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + u8 id1, id2, id3; + int ret; + + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID1, &id1, 1); + if (ret < 0) { + dev_err(nt->dev, "could not read MTP ID1\n"); + return ret; + } + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID2, &id2, 1); + if (ret < 0) { + dev_err(nt->dev, "could not read MTP ID2\n"); + return ret; + } + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID3, &id3, 1); + if (ret < 0) { + dev_err(nt->dev, "could not read MTP ID3\n"); + return ret; + } + + /* + * Multi-Time Programmable (?) memory contains manufacturer + * ID (e.g. Hydis 0x55), driver ID (e.g. NT35510 0xc0) and + * version. + */ + dev_info(nt->dev, "MTP ID manufacturer: %02x version: %02x driver: %02x\n", id1, id2, id3); + + return 0; +} + +/** + * nt35510_setup_power() - set up power config in page 1 + * @nt: the display instance to set up + */ +static int nt35510_setup_power(struct nt35510 *nt) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + int ret; + + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETAVDD, + NT35510_P1_AVDD_LEN, + nt->conf->avdd); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT1CTR, + NT35510_P1_BT1CTR_LEN, + nt->conf->bt1ctr); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETAVEE, + NT35510_P1_AVEE_LEN, + nt->conf->avee); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT2CTR, + NT35510_P1_BT2CTR_LEN, + nt->conf->bt2ctr); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGH, + NT35510_P1_VGH_LEN, + nt->conf->vgh); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT4CTR, + NT35510_P1_BT4CTR_LEN, + nt->conf->bt4ctr); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_VGHCTR, + ARRAY_SIZE(nt35510_vgh_on), + nt35510_vgh_on); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGL, + NT35510_P1_VGL_LEN, + nt->conf->vgl); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT5CTR, + NT35510_P1_BT5CTR_LEN, + nt->conf->bt5ctr); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGP, + NT35510_P1_VGP_LEN, + nt->conf->vgp); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGN, + NT35510_P1_VGN_LEN, + nt->conf->vgn); + if (ret) + return ret; + + /* Typically 10 ms */ + usleep_range(10000, 20000); + + return 0; +} + +/** + * nt35510_setup_display() - set up display config in page 0 + * @nt: the display instance to set up + */ +static int nt35510_setup_display(struct nt35510 *nt) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + const struct nt35510_config *conf = nt->conf; + u8 dopctr[NT35510_P0_DOPCTR_LEN]; + u8 gseqctr[NT35510_P0_GSEQCTR_LEN]; + u8 dpfrctr[NT35510_P0_DPFRCTR1_LEN]; + /* FIXME: set up any rotation (assume none for now) */ + u8 addr_mode = NT35510_ROTATE_0_SETTING; + u8 val; + int ret; + + /* Enable TE, EoTP and RGB pixel format */ + dopctr[0] = NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP | + NT35510_DOPCTR_0_N565; + dopctr[1] = NT35510_DOPCTR_1_CTB; + ret = nt35510_send_long(nt, dsi, NT35510_P0_DOPCTR, + NT35510_P0_DOPCTR_LEN, + dopctr); + if (ret) + return ret; + + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &addr_mode, + sizeof(addr_mode)); + if (ret < 0) + return ret; + + /* + * Source data hold time, default 0x05 = 2.5us + * 0x00..0x3F = 0 .. 31.5us in steps of 0.5us + * 0x0A = 5us + */ + val = 0x0A; + ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &val, + sizeof(val)); + if (ret < 0) + return ret; + + /* EQ control for gate signals, 0x00 = 0 us */ + gseqctr[0] = 0x00; + gseqctr[1] = 0x00; + ret = nt35510_send_long(nt, dsi, NT35510_P0_GSEQCTR, + NT35510_P0_GSEQCTR_LEN, + gseqctr); + if (ret) + return ret; + + ret = nt35510_send_long(nt, dsi, NT35510_P0_SDEQCTR, + NT35510_P0_SDEQCTR_LEN, + conf->sdeqctr); + if (ret) + return ret; + + ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDVPCTR, + &conf->sdvpctr, 1); + if (ret < 0) + return ret; + + /* + * Display timing control for active and idle off mode: + * the first byte contains + * the two high bits of T1A and second byte the low 8 bits, and + * the valid range is 0x100 (257) to 0x3ff (1023) representing + * 258..1024 (+1) pixel clock ticks for one scanline. At 20MHz pixel + * clock this covers the range of 12.90us .. 51.20us in steps of + * 0.05us, the default is 0x184 (388) representing 389 ticks. + * The third byte is VBPDA, vertical back porch display active + * and the fourth VFPDA, vertical front porch display active, + * both given in number of scanlines in the range 0x02..0xff + * for 2..255 scanlines. The fifth byte is 2 bits selecting + * PSEL for active and idle off mode, how much the 20MHz clock + * is divided by 0..3. This needs to be adjusted to get the right + * frame rate. + */ + dpfrctr[0] = (conf->t1 >> 8) & 0xFF; + dpfrctr[1] = conf->t1 & 0xFF; + /* Vertical back porch */ + dpfrctr[2] = conf->vbp; + /* Vertical front porch */ + dpfrctr[3] = conf->vfp; + dpfrctr[4] = conf->psel; + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR1, + NT35510_P0_DPFRCTR1_LEN, + dpfrctr); + if (ret) + return ret; + /* For idle and partial idle off mode we decrease front porch by one */ + dpfrctr[3]--; + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR2, + NT35510_P0_DPFRCTR2_LEN, + dpfrctr); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR3, + NT35510_P0_DPFRCTR3_LEN, + dpfrctr); + if (ret) + return ret; + + /* Enable TE on vblank */ + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret) + return ret; + + /* Turn on the pads? */ + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPMCTR12, + NT35510_P0_DPMCTR12_LEN, + conf->dpmctr12); + if (ret) + return ret; + + return 0; +} + +static int nt35510_set_brightness(struct backlight_device *bl) +{ + struct nt35510 *nt = bl_get_data(bl); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + u8 brightness = bl->props.brightness; + int ret; + + dev_dbg(nt->dev, "set brightness %d\n", brightness); + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, + &brightness, + sizeof(brightness)); + if (ret < 0) + return ret; + + return 0; +} + +static const struct backlight_ops nt35510_bl_ops = { + .update_status = nt35510_set_brightness, +}; + +/* + * This power-on sequence + */ +static int nt35510_power_on(struct nt35510 *nt) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(nt->supplies), nt->supplies); + if (ret < 0) { + dev_err(nt->dev, "unable to enable regulators\n"); + return ret; + } + + /* Toggle RESET in accordance with datasheet page 370 */ + if (nt->reset_gpio) { + gpiod_set_value(nt->reset_gpio, 1); + /* Active min 10 us according to datasheet, let's say 20 */ + usleep_range(20, 1000); + gpiod_set_value(nt->reset_gpio, 0); + /* + * 5 ms during sleep mode, 120 ms during sleep out mode + * according to datasheet, let's use 120-140 ms. + */ + usleep_range(120000, 140000); + } + + ret = nt35510_send_long(nt, dsi, MCS_CMD_MTP_READ_PARAM, + ARRAY_SIZE(nt35510_mauc_mtp_read_param), + nt35510_mauc_mtp_read_param); + if (ret) + return ret; + + ret = nt35510_send_long(nt, dsi, MCS_CMD_MTP_READ_SETTING, + ARRAY_SIZE(nt35510_mauc_mtp_read_setting), + nt35510_mauc_mtp_read_setting); + if (ret) + return ret; + + nt35510_read_id(nt); + + /* Set up stuff in manufacturer control, page 1 */ + ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR, + ARRAY_SIZE(nt35510_mauc_select_page_1), + nt35510_mauc_select_page_1); + if (ret) + return ret; + + ret = nt35510_setup_power(nt); + if (ret) + return ret; + + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_r); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_g); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_b); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_r); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_g); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_b); + if (ret) + return ret; + + /* Set up stuff in manufacturer control, page 0 */ + ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR, + ARRAY_SIZE(nt35510_mauc_select_page_0), + nt35510_mauc_select_page_0); + if (ret) + return ret; + + ret = nt35510_setup_display(nt); + if (ret) + return ret; + + return 0; +} + +static int nt35510_power_off(struct nt35510 *nt) +{ + int ret; + + ret = regulator_bulk_disable(ARRAY_SIZE(nt->supplies), nt->supplies); + if (ret) + return ret; + + if (nt->reset_gpio) + gpiod_set_value(nt->reset_gpio, 1); + + return 0; +} + +static int nt35510_unprepare(struct drm_panel *panel) +{ + struct nt35510 *nt = panel_to_nt35510(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + int ret; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret) { + dev_err(nt->dev, "failed to turn display off (%d)\n", ret); + return ret; + } + usleep_range(10000, 20000); + + /* Enter sleep mode */ + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret) { + dev_err(nt->dev, "failed to enter sleep mode (%d)\n", ret); + return ret; + } + + /* Wait 4 frames, how much is that 5ms in the vendor driver */ + usleep_range(5000, 10000); + + ret = nt35510_power_off(nt); + if (ret) + return ret; + + return 0; +} + +static int nt35510_prepare(struct drm_panel *panel) +{ + struct nt35510 *nt = panel_to_nt35510(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); + int ret; + + ret = nt35510_power_on(nt); + if (ret) + return ret; + + /* Exit sleep mode */ + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret) { + dev_err(nt->dev, "failed to exit sleep mode (%d)\n", ret); + return ret; + } + /* Up to 120 ms */ + usleep_range(120000, 150000); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) { + dev_err(nt->dev, "failed to turn display on (%d)\n", ret); + return ret; + } + /* Some 10 ms */ + usleep_range(10000, 20000); + + return 0; +} + +static int nt35510_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct nt35510 *nt = panel_to_nt35510(panel); + struct drm_display_mode *mode; + struct drm_display_info *info; + + info = &connector->display_info; + info->width_mm = nt->conf->width_mm; + info->height_mm = nt->conf->height_mm; + mode = drm_mode_duplicate(connector->dev, &nt->conf->mode); + if (!mode) { + dev_err(panel->dev, "bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + mode->width_mm = nt->conf->width_mm; + mode->height_mm = nt->conf->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs nt35510_drm_funcs = { + .unprepare = nt35510_unprepare, + .prepare = nt35510_prepare, + .get_modes = nt35510_get_modes, +}; + +static int nt35510_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct nt35510 *nt; + int ret; + + nt = devm_kzalloc(dev, sizeof(struct nt35510), GFP_KERNEL); + if (!nt) + return -ENOMEM; + mipi_dsi_set_drvdata(dsi, nt); + nt->dev = dev; + + dsi->lanes = 2; + dsi->format = MIPI_DSI_FMT_RGB888; + /* + * Datasheet suggests max HS rate for NT35510 is 250 MHz + * (period time 4ns, see figure 7.6.4 page 365) and max LP rate is + * 20 MHz (period time 50ns, see figure 7.6.6. page 366). + * However these frequencies appear in source code for the Hydis + * HVA40WV1 panel and setting up the LP frequency makes the panel + * not work. + * + * TODO: if other panels prove to be closer to the datasheet, + * maybe make this a per-panel config in struct nt35510_config? + */ + dsi->hs_rate = 349440000; + dsi->lp_rate = 9600000; + dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS; + + /* + * Every new incarnation of this display must have a unique + * data entry for the system in this driver. + */ + nt->conf = of_device_get_match_data(dev); + if (!nt->conf) { + dev_err(dev, "missing device configuration\n"); + return -ENODEV; + } + + nt->supplies[0].supply = "vdd"; /* 2.3-4.8 V */ + nt->supplies[1].supply = "vddi"; /* 1.65-3.3V */ + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->supplies), + nt->supplies); + if (ret < 0) + return ret; + ret = regulator_set_voltage(nt->supplies[0].consumer, + 2300000, 4800000); + if (ret) + return ret; + ret = regulator_set_voltage(nt->supplies[1].consumer, + 1650000, 3300000); + if (ret) + return ret; + + nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); + if (IS_ERR(nt->reset_gpio)) { + dev_err(dev, "error getting RESET GPIO\n"); + return PTR_ERR(nt->reset_gpio); + } + + drm_panel_init(&nt->panel, dev, &nt35510_drm_funcs, + DRM_MODE_CONNECTOR_DSI); + + /* + * First, try to locate an external backlight (such as on GPIO) + * if this fails, assume we will want to use the internal backlight + * control. + */ + ret = drm_panel_of_backlight(&nt->panel); + if (ret) { + dev_err(dev, "error getting external backlight %d\n", ret); + return ret; + } + if (!nt->panel.backlight) { + struct backlight_device *bl; + + bl = devm_backlight_device_register(dev, "nt35510", dev, nt, + &nt35510_bl_ops, NULL); + if (IS_ERR(bl)) { + dev_err(dev, "failed to register backlight device\n"); + return PTR_ERR(bl); + } + bl->props.max_brightness = 255; + bl->props.brightness = 255; + bl->props.power = FB_BLANK_POWERDOWN; + nt->panel.backlight = bl; + } + + drm_panel_add(&nt->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + drm_panel_remove(&nt->panel); + + return 0; +} + +static void nt35510_remove(struct mipi_dsi_device *dsi) +{ + struct nt35510 *nt = mipi_dsi_get_drvdata(dsi); + int ret; + + mipi_dsi_detach(dsi); + /* Power off */ + ret = nt35510_power_off(nt); + if (ret) + dev_err(&dsi->dev, "Failed to power off\n"); + + drm_panel_remove(&nt->panel); +} + +/* + * These gamma correction values are 10bit tuples, so only bits 0 and 1 is + * ever used in the first byte. They form a positive and negative gamma + * correction curve for each color, values must be strictly higher for each + * step on the curve. As can be seen these default curves goes from 0x0001 + * to 0x03FE. + */ +#define NT35510_GAMMA_POS_DEFAULT 0x00, 0x01, 0x00, 0x43, 0x00, \ + 0x6B, 0x00, 0x87, 0x00, 0xA3, 0x00, 0xCE, 0x00, 0xF1, 0x01, \ + 0x27, 0x01, 0x53, 0x01, 0x98, 0x01, 0xCE, 0x02, 0x22, 0x02, \ + 0x83, 0x02, 0x78, 0x02, 0x9E, 0x02, 0xDD, 0x03, 0x00, 0x03, \ + 0x2E, 0x03, 0x54, 0x03, 0x7F, 0x03, 0x95, 0x03, 0xB3, 0x03, \ + 0xC2, 0x03, 0xE1, 0x03, 0xF1, 0x03, 0xFE + +#define NT35510_GAMMA_NEG_DEFAULT 0x00, 0x01, 0x00, 0x43, 0x00, \ + 0x6B, 0x00, 0x87, 0x00, 0xA3, 0x00, 0xCE, 0x00, 0xF1, 0x01, \ + 0x27, 0x01, 0x53, 0x01, 0x98, 0x01, 0xCE, 0x02, 0x22, 0x02, \ + 0x43, 0x02, 0x50, 0x02, 0x9E, 0x02, 0xDD, 0x03, 0x00, 0x03, \ + 0x2E, 0x03, 0x54, 0x03, 0x7F, 0x03, 0x95, 0x03, 0xB3, 0x03, \ + 0xC2, 0x03, 0xE1, 0x03, 0xF1, 0x03, 0xFE + +/* + * The Hydis HVA40WV1 panel + */ +static const struct nt35510_config nt35510_hydis_hva40wv1 = { + .width_mm = 52, + .height_mm = 86, + /** + * As the Hydis panel is used in command mode, the porches etc + * are settings programmed internally into the NT35510 controller + * and generated toward the physical display. As the panel is not + * used in video mode, these are not really exposed to the DSI + * host. + * + * Display frame rate control: + * Frame rate = (20 MHz / 1) / (389 * (7 + 50 + 800)) ~= 60 Hz + */ + .mode = { + /* The internal pixel clock of the NT35510 is 20 MHz */ + .clock = 20000, + .hdisplay = 480, + .hsync_start = 480 + 2, /* HFP = 2 */ + .hsync_end = 480 + 2 + 0, /* HSync = 0 */ + .htotal = 480 + 2 + 0 + 5, /* HFP = 5 */ + .vdisplay = 800, + .vsync_start = 800 + 2, /* VFP = 2 */ + .vsync_end = 800 + 2 + 0, /* VSync = 0 */ + .vtotal = 800 + 2 + 0 + 5, /* VBP = 5 */ + .flags = 0, + }, + /* 0x09: AVDD = 5.6V */ + .avdd = { 0x09, 0x09, 0x09 }, + /* 0x34: PCK = Hsync/2, BTP = 2 x VDDB */ + .bt1ctr = { 0x34, 0x34, 0x34 }, + /* 0x09: AVEE = -5.6V */ + .avee = { 0x09, 0x09, 0x09 }, + /* 0x24: NCK = Hsync/2, BTN = -2 x VDDB */ + .bt2ctr = { 0x24, 0x24, 0x24 }, + /* 0x05 = 12V */ + .vgh = { 0x05, 0x05, 0x05 }, + /* 0x24: NCKA = Hsync/2, VGH = 2 x AVDD - AVEE */ + .bt4ctr = { 0x24, 0x24, 0x24 }, + /* 0x0B = -13V */ + .vgl = { 0x0B, 0x0B, 0x0B }, + /* 0x24: LCKA = Hsync, VGL = AVDD + VCL - AVDD */ + .bt5ctr = { 0x24, 0x24, 0x24 }, + /* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */ + .vgp = { 0x00, 0xA3, 0x00 }, + /* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */ + .vgn = { 0x00, 0xA3, 0x00 }, + /* SDEQCTR: source driver EQ mode 2, 2.5 us rise time on each step */ + .sdeqctr = { 0x01, 0x05, 0x05, 0x05 }, + /* SDVPCTR: Normal operation off color during v porch */ + .sdvpctr = 0x01, + /* T1: number of pixel clocks on one scanline: 0x184 = 389 clocks */ + .t1 = 0x0184, + /* VBP: vertical back porch toward the panel */ + .vbp = 7, + /* VFP: vertical front porch toward the panel */ + .vfp = 50, + /* PSEL: divide pixel clock 20MHz with 1 (no clock downscaling) */ + .psel = 0, + /* DPTMCTR12: 0x03: LVGL = VGLX, overlap mode, swap R->L O->E */ + .dpmctr12 = { 0x03, 0x00, 0x00, }, + /* Default gamma correction values */ + .gamma_corr_pos_r = { NT35510_GAMMA_POS_DEFAULT }, + .gamma_corr_pos_g = { NT35510_GAMMA_POS_DEFAULT }, + .gamma_corr_pos_b = { NT35510_GAMMA_POS_DEFAULT }, + .gamma_corr_neg_r = { NT35510_GAMMA_NEG_DEFAULT }, + .gamma_corr_neg_g = { NT35510_GAMMA_NEG_DEFAULT }, + .gamma_corr_neg_b = { NT35510_GAMMA_NEG_DEFAULT }, +}; + +static const struct of_device_id nt35510_of_match[] = { + { + .compatible = "hydis,hva40wv1", + .data = &nt35510_hydis_hva40wv1, + }, + { } +}; +MODULE_DEVICE_TABLE(of, nt35510_of_match); + +static struct mipi_dsi_driver nt35510_driver = { + .probe = nt35510_probe, + .remove = nt35510_remove, + .driver = { + .name = "panel-novatek-nt35510", + .of_match_table = nt35510_of_match, + }, +}; +module_mipi_dsi_driver(nt35510_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("NT35510-based panel driver"); +MODULE_LICENSE("GPL v2"); |