Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 717 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
new file mode 100644
index 0000000000..7bb723d445
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for panels based on Sitronix ST7703 controller, souch as:
+ *
+ * - Rocktech jh057n00900 5.5" MIPI-DSI panel
+ *
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DRV_NAME "panel-sitronix-st7703"
+
+/* Manufacturer specific Commands send via DSI */
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+#define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETAPID	 0xB1
+#define ST7703_CMD_SETDISP	 0xB2
+#define ST7703_CMD_SETRGBIF	 0xB3
+#define ST7703_CMD_SETCYC	 0xB4
+#define ST7703_CMD_SETBGP	 0xB5
+#define ST7703_CMD_SETVCOM	 0xB6
+#define ST7703_CMD_SETOTP	 0xB7
+#define ST7703_CMD_SETPOWER_EXT	 0xB8
+#define ST7703_CMD_SETEXTC	 0xB9
+#define ST7703_CMD_SETMIPI	 0xBA
+#define ST7703_CMD_SETVDC	 0xBC
+#define ST7703_CMD_UNKNOWN_BF	 0xBF
+#define ST7703_CMD_SETSCR	 0xC0
+#define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
+#define ST7703_CMD_SETIO	 0xC7
+#define ST7703_CMD_SETCABC	 0xC8
+#define ST7703_CMD_SETPANEL	 0xCC
+#define ST7703_CMD_SETGAMMA	 0xE0
+#define ST7703_CMD_SETEQ	 0xE3
+#define ST7703_CMD_SETGIP1	 0xE9
+#define ST7703_CMD_SETGIP2	 0xEA
+#define ST7703_CMD_UNKNOWN_EF	 0xEF
+
+struct st7703 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+	struct regulator *vcc;
+	struct regulator *iovcc;
+	bool prepared;
+
+	struct dentry *debugfs;
+	const struct st7703_panel_desc *desc;
+};
+
+struct st7703_panel_desc {
+	const struct drm_display_mode *mode;
+	unsigned int lanes;
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+	int (*init_sequence)(struct st7703 *ctx);
+};
+
+static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
+{
+	return container_of(panel, struct st7703, panel);
+}
+
+static int jh057n_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor. Most of the commands
+	 * resemble the ST7703 but the number of parameters often don't match
+	 * so it's likely a clone.
+	 */
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
+				   0xF1, 0x12, 0x83);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
+				   0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+				   0x00, 0x00);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
+				   0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
+				   0x00);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
+				   0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
+				   0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
+	msleep(20);
+
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
+				   0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
+				   0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+				   0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+				   0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+				   0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+				   0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+				   0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
+				   0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				   0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+				   0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+				   0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+				   0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+				   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
+				   0xA5, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
+				   0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
+				   0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
+				   0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
+				   0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
+				   0x11, 0x18);
+
+	return 0;
+}
+
+static const struct drm_display_mode jh057n00900_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 90,
+	.hsync_end   = 720 + 90 + 20,
+	.htotal	     = 720 + 90 + 20 + 20,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 20,
+	.vsync_end   = 1440 + 20 + 4,
+	.vtotal	     = 1440 + 20 + 4 + 12,
+	.clock	     = 75276,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 65,
+	.height_mm   = 130,
+};
+
+static const struct st7703_panel_desc jh057n00900_panel_desc = {
+	.mode = &jh057n00900_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = jh057n_init_sequence,
+};
+
+static int xbd599_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	/* Magic sequence to unlock user commands below. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
+			       0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
+			       0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
+			       0x05, /* IHSRX = x6 (Low High Speed driving ability) */
+			       0xF9, /* TX_CLK_SEL = fDSICLK/16 */
+			       0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
+			       0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
+			       /* The rest is undocumented in ST7703 datasheet */
+			       0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
+			       0x4F, 0x11, 0x00, 0x00, 0x37);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
+			       0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
+			       0x22, /* DT = 15ms XDK_ECP = x2 */
+			       0x20, /* PFM_DC_DIV = /1 */
+			       0x03  /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
+
+	/* RGB I/F porch timing */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
+			       0x10, /* VBP_RGB_GEN */
+			       0x10, /* VFP_RGB_GEN */
+			       0x05, /* DE_BP_RGB_GEN */
+			       0x05, /* DE_FP_RGB_GEN */
+			       /* The rest is undocumented in ST7703 datasheet */
+			       0x03, 0xFF,
+			       0x00, 0x00,
+			       0x00, 0x00);
+
+	/* Source driving settings. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
+			       0x73, /* N_POPON */
+			       0x73, /* N_NOPON */
+			       0x50, /* I_POPON */
+			       0x50, /* I_NOPON */
+			       0x00, /* SCR[31,24] */
+			       0xC0, /* SCR[23,16] */
+			       0x08, /* SCR[15,8] */
+			       0x70, /* SCR[7,0] */
+			       0x00  /* Undocumented */);
+
+	/* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+
+	/*
+	 * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
+	 * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
+	 */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+
+	/* Zig-Zag Type C column inversion. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+
+	/* Set display resolution. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
+			       0xF0, /* NL = 240 */
+			       0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
+				      * RESO_SEL = 720RGB
+				      */
+			       0xF0  /* WHITE_GND_EN = 1 (GND),
+				      * WHITE_FRAME_SEL = 7 frames,
+				      * ISC = 0 frames
+				      */);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
+			       0x00, /* PNOEQ */
+			       0x00, /* NNOEQ */
+			       0x0B, /* PEQGND */
+			       0x0B, /* NEQGND */
+			       0x10, /* PEQVCI */
+			       0x10, /* NEQVCI */
+			       0x00, /* PEQVCI1 */
+			       0x00, /* NEQVCI1 */
+			       0x00, /* reserved */
+			       0x00, /* reserved */
+			       0xFF, /* reserved */
+			       0x00, /* reserved */
+			       0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
+			       0x10  /* SLPIN_OPTION = 1 (no need vsync after sleep-in)
+				      * VEDIO_NO_CHECK_EN = 0
+				      * ESD_WHITE_GND_EN = 0
+				      * ESD_DET_TIME_SEL = 0 frames
+				      */);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
+			       0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
+			       0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
+			       0x32, /* VRP  */
+			       0x32, /* VRN */
+			       0x77, /* reserved */
+			       0xF1, /* APS = 1 (small),
+				      * VGL_DET_EN = 1, VGH_DET_EN = 1,
+				      * VGL_TURBO = 1, VGH_TURBO = 1
+				      */
+			       0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
+			       0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
+			       0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
+			       0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
+			       0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
+			       0x77  /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
+
+	/* Reference voltage. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
+			       0x07, /* VREF_SEL = 4.2V */
+			       0x07  /* NVREF_SEL = 4.2V */);
+	msleep(20);
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
+			       0x2C, /* VCOMDC_F = -0.67V */
+			       0x2C  /* VCOMDC_B = -0.67V */);
+
+	/* Undocumented command. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+
+	/* This command is to set forward GIP timing. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
+			       0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
+			       0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+			       0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+			       0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+			       0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			       0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+	/* This command is to set backward GIP timing. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
+			       0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+			       0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			       0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
+			       0xA5, 0x00, 0x00, 0x00, 0x00);
+
+	/* Adjust the gamma characteristics of the panel. */
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
+			       0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
+			       0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
+			       0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
+			       0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
+			       0x12, 0x18);
+
+	return 0;
+}
+
+static const struct drm_display_mode xbd599_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 40,
+	.hsync_end   = 720 + 40 + 40,
+	.htotal	     = 720 + 40 + 40 + 40,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 18,
+	.vsync_end   = 1440 + 18 + 10,
+	.vtotal	     = 1440 + 18 + 10 + 17,
+	.clock	     = 69000,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 68,
+	.height_mm   = 136,
+};
+
+static const struct st7703_panel_desc xbd599_desc = {
+	.mode = &xbd599_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = xbd599_init_sequence,
+};
+
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+			       0xda, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+			       0xf0, 0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+			       0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+			       0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x50, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+			       0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+			       0x33);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+			       0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+			       0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+			       0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+			       0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+			       0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+			       0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+			       0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+			       0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+			       0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+			       0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+			       0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+			       0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+	.hdisplay	= 640,
+	.hsync_start	= 640 + 40,
+	.hsync_end	= 640 + 40 + 2,
+	.htotal		= 640 + 40 + 2 + 80,
+	.vdisplay	= 480,
+	.vsync_start	= 480 + 18,
+	.vsync_end	= 480 + 18 + 2,
+	.vtotal		= 480 + 18 + 2 + 28,
+	.clock		= 24150,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 70,
+	.height_mm	= 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+	.mode = &rg353v2_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rg353v2_init_sequence,
+};
+
+static int st7703_enable(struct drm_panel *panel)
+{
+	struct st7703 *ctx = panel_to_st7703(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = ctx->desc->init_sequence(ctx);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+		return ret;
+	}
+
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	/* Panel is operational 120 msec after reset */
+	msleep(60);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+
+	dev_dbg(ctx->dev, "Panel init sequence done\n");
+
+	return 0;
+}
+
+static int st7703_disable(struct drm_panel *panel)
+{
+	struct st7703 *ctx = panel_to_st7703(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
+
+	return 0;
+}
+
+static int st7703_unprepare(struct drm_panel *panel)
+{
+	struct st7703 *ctx = panel_to_st7703(panel);
+
+	if (!ctx->prepared)
+		return 0;
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vcc);
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int st7703_prepare(struct drm_panel *panel)
+{
+	struct st7703 *ctx = panel_to_st7703(panel);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	dev_dbg(ctx->dev, "Resetting the panel\n");
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ret = regulator_enable(ctx->iovcc);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(ctx->vcc);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
+		regulator_disable(ctx->iovcc);
+		return ret;
+	}
+
+	/* Give power supplies time to stabilize before deasserting reset. */
+	usleep_range(10000, 20000);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(15000, 20000);
+
+	ctx->prepared = true;
+
+	return 0;
+}
+
+static const u32 mantix_bus_formats[] = {
+	MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+static int st7703_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct st7703 *ctx = panel_to_st7703(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
+	if (!mode) {
+		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+			ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+			drm_mode_vrefresh(ctx->desc->mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 mantix_bus_formats,
+					 ARRAY_SIZE(mantix_bus_formats));
+
+	return 1;
+}
+
+static const struct drm_panel_funcs st7703_drm_funcs = {
+	.disable   = st7703_disable,
+	.unprepare = st7703_unprepare,
+	.prepare   = st7703_prepare,
+	.enable	   = st7703_enable,
+	.get_modes = st7703_get_modes,
+};
+
+static int allpixelson_set(void *data, u64 val)
+{
+	struct st7703 *ctx = data;
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	dev_dbg(ctx->dev, "Setting all pixels on\n");
+	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
+	msleep(val * 1000);
+	/* Reset the panel to get video back */
+	drm_panel_disable(&ctx->panel);
+	drm_panel_unprepare(&ctx->panel);
+	drm_panel_prepare(&ctx->panel);
+	drm_panel_enable(&ctx->panel);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
+			allpixelson_set, "%llu\n");
+
+static void st7703_debugfs_init(struct st7703 *ctx)
+{
+	ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
+
+	debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
+			    &allpixelson_fops);
+}
+
+static void st7703_debugfs_remove(struct st7703 *ctx)
+{
+	debugfs_remove_recursive(ctx->debugfs);
+	ctx->debugfs = NULL;
+}
+
+static int st7703_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct st7703 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset gpio\n");
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+	ctx->desc = of_device_get_match_data(dev);
+
+	dsi->mode_flags = ctx->desc->mode_flags;
+	dsi->format = ctx->desc->format;
+	dsi->lanes = ctx->desc->lanes;
+
+	ctx->vcc = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(ctx->vcc))
+		return dev_err_probe(dev, PTR_ERR(ctx->vcc), "Failed to request vcc regulator\n");
+
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc))
+		return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+				     "Failed to request iovcc regulator\n");
+
+	drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+		 ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+		 drm_mode_vrefresh(ctx->desc->mode),
+		 mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+	st7703_debugfs_init(ctx);
+	return 0;
+}
+
+static void st7703_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = drm_panel_unprepare(&ctx->panel);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
+
+	ret = drm_panel_disable(&ctx->panel);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
+}
+
+static void st7703_remove(struct mipi_dsi_device *dsi)
+{
+	struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	st7703_shutdown(dsi);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	st7703_debugfs_remove(ctx);
+}
+
+static const struct of_device_id st7703_of_match[] = {
+	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
+	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
+	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st7703_of_match);
+
+static struct mipi_dsi_driver st7703_driver = {
+	.probe	= st7703_probe,
+	.remove = st7703_remove,
+	.shutdown = st7703_shutdown,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = st7703_of_match,
+	},
+};
+module_mipi_dsi_driver(st7703_driver);
+
+MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
+MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 based MIPI DSI panels");
+MODULE_LICENSE("GPL v2");