Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 2360 insertions, 254 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 888297d0d3..5b15d02948 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -67,61 +67,25 @@ config DRM_PANEL_BOE_HIMAX8279D
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
-config DRM_PANEL_BOE_TV101WUM_NL6
-	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
+config DRM_PANEL_BOE_TH101MB31UIG002_28A
+	tristate "Boe TH101MB31UIG002-28A panel"
 	depends on OF
 	depends on DRM_MIPI_DSI
 	depends on BACKLIGHT_CLASS_DEVICE
 	help
-	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
-	  45NA WUXGA PANEL DSI Video Mode panel
+	  Say Y here if you want to enable support for Boe
+	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
+	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
+	  interface to the host and has a built-in LED backlight.
 
-config DRM_PANEL_DSI_CM
-	tristate "Generic DSI command mode panels"
+config DRM_PANEL_BOE_TV101WUM_NL6
+	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
 	depends on OF
 	depends on DRM_MIPI_DSI
 	depends on BACKLIGHT_CLASS_DEVICE
 	help
-	  DRM panel driver for DSI command mode panels with support for
-	  embedded and external backlights.
-
-config DRM_PANEL_LVDS
-	tristate "Generic LVDS panel driver"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	select VIDEOMODE_HELPERS
-	help
-	  This driver supports LVDS panels that don't require device-specific
-	  handling of power supplies or control signals. It implements automatic
-	  backlight handling if the panel is attached to a backlight controller.
-
-config DRM_PANEL_SIMPLE
-	tristate "support for simple panels (other than eDP ones)"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	help
-	  DRM panel driver for dumb non-eDP panels that need at most a regulator
-	  and a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
-
-config DRM_PANEL_EDP
-	tristate "support for simple Embedded DisplayPort panels"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	select DRM_DISPLAY_DP_HELPER
-	select DRM_DISPLAY_HELPER
-	select DRM_DP_AUX_BUS
-	select DRM_KMS_HELPER
-	help
-	  DRM panel driver for dumb eDP panels that need at most a regulator and
-	  a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
+	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+	  45NA WUXGA PANEL DSI Video Mode panel
 
 config DRM_PANEL_EBBG_FT8719
 	tristate "EBBG FT8719 panel driver"
@@ -162,6 +126,35 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
 	  Say Y if you want to enable support for panels based on the
 	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
 
+config DRM_PANEL_DSI_CM
+	tristate "Generic DSI command mode panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  DRM panel driver for DSI command mode panels with support for
+	  embedded and external backlights.
+
+config DRM_PANEL_LVDS
+	tristate "Generic LVDS panel driver"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  This driver supports LVDS panels that don't require device-specific
+	  handling of power supplies or control signals. It implements automatic
+	  backlight handling if the panel is attached to a backlight controller.
+
+config DRM_PANEL_HIMAX_HX83112A
+	tristate "Himax HX83112A-based DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_KMS_HELPER
+	help
+	  Say Y here if you want to enable support for Himax HX83112A-based
+	  display panels, such as the one found in the Fairphone 4 smartphone.
+
 config DRM_PANEL_HIMAX_HX8394
 	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
 	depends on OF
@@ -251,17 +244,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
 	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
 	  800RGBx1280 dots at maximum.
 
-config DRM_PANEL_JDI_LT070ME05000
-	tristate "JDI LT070ME05000 WUXGA DSI panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for JDI DSI video mode
-	  panel as found in Google Nexus 7 (2013) devices.
-	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
-	  24 bit per pixel.
-
 config DRM_PANEL_JDI_LPM102A188A
 	tristate "JDI LPM102A188A DSI panel"
 	depends on OF && GPIOLIB
@@ -273,6 +255,17 @@ config DRM_PANEL_JDI_LPM102A188A
 	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
 	  to the host.
 
+config DRM_PANEL_JDI_LT070ME05000
+	tristate "JDI LT070ME05000 WUXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for JDI DSI video mode
+	  panel as found in Google Nexus 7 (2013) devices.
+	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+	  24 bit per pixel.
+
 config DRM_PANEL_JDI_R63452
 	tristate "JDI R63452 Full HD DSI panel"
 	depends on OF
@@ -326,12 +319,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
-config DRM_PANEL_SAMSUNG_LD9040
-	tristate "Samsung LD9040 RGB/SPI panel"
-	depends on OF && SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	select VIDEOMODE_HELPERS
-
 config DRM_PANEL_LG_LB035Q02
 	tristate "LG LB035Q024573 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -359,6 +346,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
 	  with the Magnachip D53E6EA8966 panel IC. This panel receives
 	  video data via DSI but commands via 9-bit SPI using DBI.
 
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
 config DRM_PANEL_NEC_NL8048HL11
 	tristate "NEC NL8048HL11 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -438,6 +436,16 @@ config DRM_PANEL_NOVATEK_NT36672A
 	  around the Novatek NT36672A display controller, such as some
 	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
 
+config DRM_PANEL_NOVATEK_NT36672E
+	tristate "Novatek NT36672E DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
+	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
+	  RGB per pixel.
+
 config DRM_PANEL_NOVATEK_NT39016
 	tristate "Novatek NT39016 RGB/SPI panel"
 	depends on OF && SPI
@@ -447,17 +455,6 @@ config DRM_PANEL_NOVATEK_NT39016
 	  Say Y here if you want to enable support for the panels built
 	  around the Novatek NT39016 display controller.
 
-config DRM_PANEL_MANTIX_MLAF057WE51
-	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for the Mantix
-	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
-	  has a resolution of 720x1440 pixels, a built in backlight and touch
-	  controller.
-
 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	tristate "Olimex LCD-OLinuXino panel"
 	depends on OF
@@ -554,6 +551,12 @@ config DRM_PANEL_RONBO_RB070D30
 	  Say Y here if you want to enable support for Ronbo Electronics
 	  RB070D30 1024x600 DSI panel.
 
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_ATNA33XC20
 	tristate "Samsung ATNA33XC20 eDP panel"
 	depends on OF
@@ -577,6 +580,12 @@ config DRM_PANEL_SAMSUNG_DB7430
 	  DB7430 DPI display controller used in such devices as the
 	  LMS397KF04 480x800 DPI panel.
 
+config DRM_PANEL_SAMSUNG_LD9040
+	tristate "Samsung LD9040 RGB/SPI panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6D16D0
 	tristate "Samsung S6D16D0 DSI video mode panel"
 	depends on OF
@@ -642,12 +651,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
 	  Say Y here if you want to be able to access the Samsung
 	  S6E63M0 panel using DSI.
 
-config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
-	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
-	depends on OF
-	select DRM_MIPI_DSI
-	select VIDEOMODE_HELPERS
-
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
@@ -746,15 +749,6 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
-config DRM_PANEL_SYNAPTICS_R63353
-	tristate "Synaptics R63353-based panels"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y if you want to enable support for panels based on the
-	  Synaptics R63353 controller.
-
 config DRM_PANEL_SONY_ACX565AKM
 	tristate "Sony ACX565AKM panel"
 	depends on GPIOLIB && OF && SPI
@@ -794,6 +788,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
 	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
 	  the host, a built-in LED backlight and touch controller.
 
+config DRM_PANEL_EDP
+	tristate "support for simple Embedded DisplayPort panels"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	help
+	  DRM panel driver for dumb eDP panels that need at most a regulator and
+	  a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_SIMPLE
+	tristate "support for simple panels (other than eDP ones)"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	help
+	  DRM panel driver for dumb non-eDP panels that need at most a regulator
+	  and a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_SYNAPTICS_R63353
+	tristate "Synaptics R63353-based panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for panels based on the
+	  Synaptics R63353 controller.
+
 config DRM_PANEL_TDO_TL070WSH30
 	tristate "TDO TL070WSH30 DSI panel"
 	depends on OF
@@ -837,6 +868,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_R66451
+	tristate "Visionox R66451"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	help
+	  Say Y here if you want to enable support for Visionox
+	  R66451 1080x2340 AMOLED DSI panel.
+
 config DRM_PANEL_VISIONOX_RM69299
 	tristate "Visionox RM69299"
 	depends on OF
@@ -854,17 +896,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
 	  Say Y here if you want to enable support for Visionox
 	  VTDR6130 1080x2400 AMOLED DSI panel.
 
-config DRM_PANEL_VISIONOX_R66451
-	tristate "Visionox R66451"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	select DRM_DISPLAY_DP_HELPER
-	select DRM_DISPLAY_HELPER
-	help
-	  Say Y here if you want to enable support for Visionox
-	  R66451 1080x2340 AMOLED DSI panel.
-
 config DRM_PANEL_WIDECHIPS_WS2401
 	tristate "Widechips WS2401 DPI panel driver"
 	depends on SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index d94a644d0a..f156d7fa0b 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
 obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
 obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
+obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
@@ -14,6 +15,7 @@ obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
+obj-$(CONFIG_DRM_PANEL_HIMAX_HX83112A) += panel-himax-hx83112a.o
 obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
@@ -41,6 +43,7 @@ obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36523) += panel-novatek-nt36523.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672E) += panel-novatek-nt36672e.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
 obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
index 11b64acbe8..e225840b0d 100644
--- a/drivers/gpu/drm/panel/panel-boe-himax8279d.c
+++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
@@ -854,26 +854,20 @@ static int panel_add(struct panel_info *pinfo)
 
 	pinfo->pp18_gpio = devm_gpiod_get(dev, "pp18", GPIOD_OUT_HIGH);
 	if (IS_ERR(pinfo->pp18_gpio)) {
-		ret = PTR_ERR(pinfo->pp18_gpio);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pp18 gpio: %d\n", ret);
-		return ret;
+		return dev_err_probe(dev, PTR_ERR(pinfo->pp18_gpio),
+							 "failed to get pp18 gpio\n");
 	}
 
 	pinfo->pp33_gpio = devm_gpiod_get(dev, "pp33", GPIOD_OUT_HIGH);
 	if (IS_ERR(pinfo->pp33_gpio)) {
-		ret = PTR_ERR(pinfo->pp33_gpio);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pp33 gpio: %d\n", ret);
-		return ret;
+		return	dev_err_probe(dev, PTR_ERR(pinfo->pp33_gpio),
+							 "failed to get pp33 gpio\n");
 	}
 
 	pinfo->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
 	if (IS_ERR(pinfo->enable_gpio)) {
-		ret = PTR_ERR(pinfo->enable_gpio);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get enable gpio: %d\n", ret);
-		return ret;
+		return	dev_err_probe(dev, PTR_ERR(pinfo->enable_gpio),
+						 "failed to get enable gpio\n");
 	}
 
 	drm_panel_init(&pinfo->base, dev, &panel_funcs,
diff --git a/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c b/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c
new file mode 100644
index 0000000000..763e9f8342
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Alexander Warnecke <awarnecke002@hotmail.com>
+ * Copyright (c) 2023 Manuel Traut <manut@mecka.net>
+ * Copyright (c) 2023 Dang Huynh <danct12@riseup.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct boe_th101mb31ig002 {
+	struct drm_panel panel;
+
+	struct mipi_dsi_device *dsi;
+
+	struct regulator *power;
+	struct gpio_desc *enable;
+	struct gpio_desc *reset;
+
+	enum drm_panel_orientation orientation;
+};
+
+static void boe_th101mb31ig002_reset(struct boe_th101mb31ig002 *ctx)
+{
+	gpiod_direction_output(ctx->reset, 0);
+	usleep_range(10, 100);
+	gpiod_direction_output(ctx->reset, 1);
+	usleep_range(10, 100);
+	gpiod_direction_output(ctx->reset, 0);
+	usleep_range(5000, 6000);
+}
+
+static int boe_th101mb31ig002_enable(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	mipi_dsi_dcs_write_seq(dsi, 0xE0, 0xAB, 0xBA);
+	mipi_dsi_dcs_write_seq(dsi, 0xE1, 0xBA, 0xAB);
+	mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x10, 0x01, 0x47, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x0C, 0x14, 0x04, 0x50, 0x50, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0xB3, 0x56, 0x53, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB4, 0x33, 0x30, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0xB6, 0xB0, 0x00, 0x00, 0x10, 0x00, 0x10,
+				    0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB8, 0x05, 0x12, 0x29, 0x49, 0x48, 0x00,
+				    0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB9, 0x7C, 0x65, 0x55, 0x49, 0x46, 0x36,
+				    0x3B, 0x24, 0x3D, 0x3C, 0x3D, 0x5C, 0x4C,
+				    0x55, 0x47, 0x46, 0x39, 0x26, 0x06, 0x7C,
+				    0x65, 0x55, 0x49, 0x46, 0x36, 0x3B, 0x24,
+				    0x3D, 0x3C, 0x3D, 0x5C, 0x4C, 0x55, 0x47,
+				    0x46, 0x39, 0x26, 0x06);
+	mipi_dsi_dcs_write_seq(dsi, 0x00, 0xFF, 0x87, 0x12, 0x34, 0x44, 0x44,
+				    0x44, 0x44, 0x98, 0x04, 0x98, 0x04, 0x0F,
+				    0x00, 0x00, 0xC1);
+	mipi_dsi_dcs_write_seq(dsi, 0xC1, 0x54, 0x94, 0x02, 0x85, 0x9F, 0x00,
+				    0x7F, 0x00, 0x54, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC2, 0x17, 0x09, 0x08, 0x89, 0x08, 0x11,
+				    0x22, 0x20, 0x44, 0xFF, 0x18, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC3, 0x86, 0x46, 0x05, 0x05, 0x1C, 0x1C,
+				    0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
+				    0x0F, 0x0F, 0x0D, 0x0D, 0x13, 0x13, 0x11,
+				    0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC4, 0x07, 0x07, 0x04, 0x04, 0x1C, 0x1C,
+				    0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
+				    0x0E, 0x0E, 0x0C, 0x0C, 0x12, 0x12, 0x10,
+				    0x10, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC6, 0x2A, 0x2A);
+	mipi_dsi_dcs_write_seq(dsi, 0xC8, 0x21, 0x00, 0x31, 0x42, 0x34, 0x16);
+	mipi_dsi_dcs_write_seq(dsi, 0xCA, 0xCB, 0x43);
+	mipi_dsi_dcs_write_seq(dsi, 0xCD, 0x0E, 0x4B, 0x4B, 0x20, 0x19, 0x6B,
+				    0x06, 0xB3);
+	mipi_dsi_dcs_write_seq(dsi, 0xD2, 0xE3, 0x2B, 0x38, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xD4, 0x00, 0x01, 0x00, 0x0E, 0x04, 0x44,
+				    0x08, 0x10, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xE6, 0x80, 0x01, 0xFF, 0xFF, 0xFF, 0xFF,
+				    0xFF, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xF0, 0x12, 0x03, 0x20, 0x00, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xF3, 0x00);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set panel on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_disable(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(dev, "Failed to set panel off: %d\n", ret);
+
+	msleep(120);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_unprepare(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+
+	gpiod_set_value_cansleep(ctx->reset, 1);
+	gpiod_set_value_cansleep(ctx->enable, 0);
+	regulator_disable(ctx->power);
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_prepare(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_enable(ctx->power);
+	if (ret) {
+		dev_err(dev, "Failed to enable power supply: %d\n", ret);
+		return ret;
+	}
+
+	gpiod_set_value_cansleep(ctx->enable, 1);
+	msleep(50);
+	boe_th101mb31ig002_reset(ctx);
+	boe_th101mb31ig002_enable(panel);
+
+	return 0;
+}
+
+static const struct drm_display_mode boe_th101mb31ig002_default_mode = {
+	.clock		= 73500,
+	.hdisplay	= 800,
+	.hsync_start	= 800 + 64,
+	.hsync_end	= 800 + 64 + 16,
+	.htotal		= 800 + 64 + 16 + 64,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 2,
+	.vsync_end	= 1280 + 2 + 4,
+	.vtotal		= 1280 + 2 + 4 + 12,
+	.width_mm	= 135,
+	.height_mm	= 216,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int boe_th101mb31ig002_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev,
+				  &boe_th101mb31ig002_default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "Failed to add mode %ux%u@%u\n",
+			boe_th101mb31ig002_default_mode.hdisplay,
+			boe_th101mb31ig002_default_mode.vdisplay,
+			drm_mode_vrefresh(&boe_th101mb31ig002_default_mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static enum drm_panel_orientation
+boe_th101mb31ig002_get_orientation(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+
+	return ctx->orientation;
+}
+
+static const struct drm_panel_funcs boe_th101mb31ig002_funcs = {
+	.prepare = boe_th101mb31ig002_prepare,
+	.unprepare = boe_th101mb31ig002_unprepare,
+	.disable = boe_th101mb31ig002_disable,
+	.get_modes = boe_th101mb31ig002_get_modes,
+	.get_orientation = boe_th101mb31ig002_get_orientation,
+};
+
+static int boe_th101mb31ig002_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	struct boe_th101mb31ig002 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dsi = dsi;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_NO_EOT_PACKET |
+			  MIPI_DSI_MODE_LPM;
+
+	ctx->power = devm_regulator_get(&dsi->dev, "power");
+	if (IS_ERR(ctx->power))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->power),
+				     "Failed to get power regulator\n");
+
+	ctx->enable = devm_gpiod_get(&dsi->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->enable))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->enable),
+				     "Failed to get enable GPIO\n");
+
+	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
+				     "Failed to get reset GPIO\n");
+
+	ret = of_drm_get_panel_orientation(dsi->dev.of_node,
+					   &ctx->orientation);
+	if (ret)
+		return dev_err_probe(&dsi->dev, ret,
+				     "Failed to get orientation\n");
+
+	drm_panel_init(&ctx->panel, &dsi->dev, &boe_th101mb31ig002_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err_probe(&dsi->dev, ret,
+			      "Failed to attach panel to DSI host\n");
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void boe_th101mb31ig002_dsi_remove(struct mipi_dsi_device *dsi)
+{
+	struct boe_th101mb31ig002 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id boe_th101mb31ig002_of_match[] = {
+	{ .compatible = "boe,th101mb31ig002-28a", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_th101mb31ig002_of_match);
+
+static struct mipi_dsi_driver boe_th101mb31ig002_driver = {
+	.driver = {
+		.name = "boe-th101mb31ig002-28a",
+		.of_match_table = boe_th101mb31ig002_of_match,
+	},
+	.probe = boe_th101mb31ig002_dsi_probe,
+	.remove = boe_th101mb31ig002_dsi_remove,
+};
+module_mipi_dsi_driver(boe_th101mb31ig002_driver);
+
+MODULE_AUTHOR("Alexander Warnecke <awarnecke002@hotmail.com>");
+MODULE_DESCRIPTION("BOE TH101MB31IG002-28A MIPI-DSI LCD panel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 49b8a2484d..745f3e48f0 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -71,6 +71,21 @@ struct panel_delay {
 	unsigned int hpd_absent;
 
 	/**
+	 * @powered_on_to_enable: Time between panel powered on and enable.
+	 *
+	 * The minimum time, in milliseconds, that needs to have passed
+	 * between when panel powered on and enable may begin.
+	 *
+	 * This is (T3+T4+T5+T6+T8)-min on eDP timing diagrams or after the
+	 * power supply enabled until we can turn the backlight on and see
+	 * valid data.
+	 *
+	 * This doesn't normally need to be set if timings are already met by
+	 * prepare_to_enable or enable.
+	 */
+	unsigned int powered_on_to_enable;
+
+	/**
 	 * @prepare_to_enable: Time between prepare and enable.
 	 *
 	 * The minimum time, in milliseconds, that needs to have passed
@@ -216,6 +231,7 @@ struct panel_edp {
 	bool prepared;
 
 	ktime_t prepared_time;
+	ktime_t powered_on_time;
 	ktime_t unprepared_time;
 
 	const struct panel_desc *desc;
@@ -456,6 +472,8 @@ static int panel_edp_prepare_once(struct panel_edp *p)
 	gpiod_set_value_cansleep(p->enable_gpio, 1);
 	drm_dp_dpcd_set_powered(p->aux, true);
 
+	p->powered_on_time = ktime_get_boottime();
+
 	delay = p->desc->delay.hpd_reliable;
 	if (p->no_hpd)
 		delay = max(delay, p->desc->delay.hpd_absent);
@@ -581,6 +599,8 @@ static int panel_edp_enable(struct drm_panel *panel)
 
 	panel_edp_wait(p->prepared_time, p->desc->delay.prepare_to_enable);
 
+	panel_edp_wait(p->powered_on_time, p->desc->delay.powered_on_to_enable);
+
 	p->enabled = true;
 
 	return 0;
@@ -985,19 +1005,6 @@ static const struct panel_desc auo_b101ean01 = {
 	},
 };
 
-static const struct drm_display_mode auo_b116xa3_mode = {
-	.clock = 70589,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 40,
-	.hsync_end = 1366 + 40 + 40,
-	.htotal = 1366 + 40 + 40 + 32,
-	.vdisplay = 768,
-	.vsync_start = 768 + 10,
-	.vsync_end = 768 + 10 + 12,
-	.vtotal = 768 + 10 + 12 + 6,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
 static const struct drm_display_mode auo_b116xak01_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -1839,6 +1846,13 @@ static const struct panel_delay delay_200_500_p2e80 = {
 	.prepare_to_enable = 80,
 };
 
+static const struct panel_delay delay_200_500_e50_p2e80 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 50,
+	.prepare_to_enable = 80,
+};
+
 static const struct panel_delay delay_200_500_p2e100 = {
 	.hpd_absent = 200,
 	.unprepare = 500,
@@ -1851,6 +1865,13 @@ static const struct panel_delay delay_200_500_e50 = {
 	.enable = 50,
 };
 
+static const struct panel_delay delay_200_500_e50_p2e200 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 50,
+	.prepare_to_enable = 200,
+};
+
 static const struct panel_delay delay_200_500_e80 = {
 	.hpd_absent = 200,
 	.unprepare = 500,
@@ -1876,6 +1897,13 @@ static const struct panel_delay delay_200_500_e200 = {
 	.enable = 200,
 };
 
+static const struct panel_delay delay_200_500_e200_d200 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 200,
+	.disable = 200,
+};
+
 static const struct panel_delay delay_200_500_e200_d10 = {
 	.hpd_absent = 200,
 	.unprepare = 500,
@@ -1889,6 +1917,13 @@ static const struct panel_delay delay_200_150_e200 = {
 	.enable = 200,
 };
 
+static const struct panel_delay delay_200_500_e50_po2e200 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 50,
+	.powered_on_to_enable = 200,
+};
+
 #define EDP_PANEL_ENTRY(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name) \
 { \
 	.name = _name, \
@@ -1914,7 +1949,9 @@ static const struct panel_delay delay_200_150_e200 = {
  * Sort first by vendor, then by product ID.
  */
 static const struct edp_panel_entry edp_panels[] = {
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x105c, &delay_200_500_e50, "B116XTN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1062, &delay_200_500_e50, "B120XAN01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x125c, &delay_200_500_e50, "Unknown"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x145c, &delay_200_500_e50, "B116XAB01.4"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1e9b, &delay_200_500_e50, "B133UAN02.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x1ea5, &delay_200_500_e50, "B116XAK01.6"),
@@ -1923,56 +1960,91 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x239b, &delay_200_500_e50, "B116XAN06.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x255c, &delay_200_500_e50, "B116XTN02.5"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x403d, &delay_200_500_e50, "B140HAN04.0"),
-	EDP_PANEL_ENTRY2('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0",
-			 &auo_b116xa3_mode),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x435c, &delay_200_500_e50, "Unknown"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"),
-	EDP_PANEL_ENTRY2('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1",
-			 &auo_b116xa3_mode),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x723c, &delay_200_500_e50, "B140XTN07.2"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0xf390, &delay_200_500_e50, "B140XTN07.7"),
 
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0607, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0608, &delay_200_500_e50, "NT116WHM-N11"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0668, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x068f, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x06e5, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0705, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0715, &delay_200_150_e200, "NT116WHM-N21"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0717, &delay_200_500_e50_po2e200, "NV133FHM-N42"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0731, &delay_200_500_e80, "NT116WHM-N42"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0741, &delay_200_500_e200, "NT116WHM-N44"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0744, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x074c, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0751, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0754, &delay_200_500_e50_po2e200, "NV116WHM-N45"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0771, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0786, &delay_200_500_p2e80, "NV116WHM-T01"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0797, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07d1, &boe_nv133fhm_n61.delay, "NV133FHM-N61"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07d3, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07f6, &delay_200_500_e200, "NT140FHM-N44"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x07f8, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0813, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0827, &delay_200_500_e50_p2e80, "NT140WHM-N44 V8.0"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x082d, &boe_nv133fhm_n61.delay, "NV133FHM-N62"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0843, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x08b2, &delay_200_500_e200, "NT140WHM-N49"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0848, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0849, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09c3, &delay_200_500_e50, "NT116WHM-N21,836X2"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x094b, &delay_200_500_e50, "NT116WHM-N21"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0951, &delay_200_500_e80, "NV116WHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x095f, &delay_200_500_e50, "NE135FBM-N41 v8.1"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x096e, &delay_200_500_e50_po2e200, "NV116WHM-T07 V8.0"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0979, &delay_200_500_e50, "NV116WHM-N49 V8.0"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x098d, &boe_nv110wtm_n61.delay, "NV110WTM-N61"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0993, &delay_200_500_e80, "NV116WHM-T14 V8.0"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09ad, &delay_200_500_e80, "NV116WHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09ae, &delay_200_500_e200, "NT140FHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09dd, &delay_200_500_e50, "NT116WHM-N21"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a36, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a3e, &delay_200_500_e80, "NV116WHM-N49"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a5d, &delay_200_500_e50, "NV116WHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0ac5, &delay_200_500_e50, "NV116WHM-N4C"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b34, &delay_200_500_e80, "NV122WUM-N41"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b43, &delay_200_500_e200, "NV140FHM-T09"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b56, &delay_200_500_e80, "NT140FHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c20, &delay_200_500_e80, "NT140FHM-N47"),
 
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1130, &delay_200_500_e50, "N116BGE-EB2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1132, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1138, &innolux_n116bca_ea1.delay, "N116BCA-EA1-RC4"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1139, &delay_200_500_e80_d50, "N116BGE-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1141, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1145, &delay_200_500_e80_d50, "N116BCN-EB1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x114a, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x114c, &innolux_n116bca_ea1.delay, "N116BCA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1152, &delay_200_500_e80_d50, "N116BCN-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1153, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1154, &delay_200_500_e80_d50, "N116BCA-EA2"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1156, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1157, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115b, &delay_200_500_e80_d50, "N116BCN-EB1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1247, &delay_200_500_e80_d50, "N120ACA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142b, &delay_200_500_e80_d50, "N140HCA-EAC"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142e, &delay_200_500_e80_d50, "N140BGA-EA4"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x144f, &delay_200_500_e80_d50, "N140HGA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1468, &delay_200_500_e80, "N140HGA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d4, &delay_200_500_e80_d50, "N140HCA-EAC"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d6, &delay_200_500_e80_d50, "N140BGA-EA4"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x14e5, &delay_200_500_e80_d50, "N140HGA-EA1"),
 
+	EDP_PANEL_ENTRY('C', 'S', 'O', 0x1200, &delay_200_500_e50_p2e200, "MNC207QS1-1"),
+
+	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d51, &delay_200_500_e200, "Unknown"),
+	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5b, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5c, &delay_200_500_e200, "MB116AN01-2"),
 
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x048e, &delay_200_500_e200_d10, "M116NWR6 R5"),
@@ -1981,11 +2053,25 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x854b, &delay_200_500_p2e100, "R133NW4K-R0"),
 	EDP_PANEL_ENTRY('I', 'V', 'O', 0x8c4d, &delay_200_150_e200, "R140NWFM R1"),
 
+	EDP_PANEL_ENTRY('K', 'D', 'B', 0x044f, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"),
+	EDP_PANEL_ENTRY('K', 'D', 'B', 0x1118, &delay_200_500_e50, "KD116N29-30NK-A005"),
 	EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"),
 
+	EDP_PANEL_ENTRY('K', 'D', 'C', 0x044f, &delay_200_500_e50, "KD116N9-30NH-F3"),
+	EDP_PANEL_ENTRY('K', 'D', 'C', 0x05f1, &delay_200_500_e80_d50, "KD116N5-30NV-G7"),
 	EDP_PANEL_ENTRY('K', 'D', 'C', 0x0809, &delay_200_500_e50, "KD116N2930A15"),
 
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x0000, &delay_200_500_e200_d200, "Unknown"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x048d, &delay_200_500_e200_d200, "Unknown"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x0497, &delay_200_500_e200_d200, "LP116WH7-SPB1"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x052c, &delay_200_500_e200_d200, "LP133WF2-SPL7"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x0537, &delay_200_500_e200_d200, "Unknown"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x054a, &delay_200_500_e200_d200, "LP116WH8-SPC1"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x0567, &delay_200_500_e200_d200, "Unknown"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x05af, &delay_200_500_e200_d200, "Unknown"),
+	EDP_PANEL_ENTRY('L', 'G', 'D', 0x05f1, &delay_200_500_e200_d200, "Unknown"),
+
 	EDP_PANEL_ENTRY('S', 'D', 'C', 0x416d, &delay_100_500_e200, "ATNA45AF01"),
 
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x1511, &delay_200_500_e50, "LQ140M1JW48"),
diff --git a/drivers/gpu/drm/panel/panel-himax-hx83112a.c b/drivers/gpu/drm/panel/panel-himax-hx83112a.c
new file mode 100644
index 0000000000..466c27012a
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-himax-hx83112a.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree.
+ * Copyright (c) 2024 Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+/* Manufacturer specific DSI commands */
+#define HX83112A_SETPOWER1	0xb1
+#define HX83112A_SETDISP	0xb2
+#define HX83112A_SETDRV		0xb4
+#define HX83112A_SETEXTC	0xb9
+#define HX83112A_SETBANK	0xbd
+#define HX83112A_SETPTBA	0xbf
+#define HX83112A_SETDGCLUT	0xc1
+#define HX83112A_SETTCON	0xc7
+#define HX83112A_SETCLOCK	0xcb
+#define HX83112A_SETPANEL	0xcc
+#define HX83112A_SETPOWER2	0xd2
+#define HX83112A_SETGIP0	0xd3
+#define HX83112A_SETGIP1	0xd5
+#define HX83112A_SETGIP2	0xd6
+#define HX83112A_SETGIP3	0xd8
+#define HX83112A_SETTP1		0xe7
+#define HX83112A_UNKNOWN1	0xe9
+
+struct hx83112a_panel {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct regulator_bulk_data supplies[3];
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct hx83112a_panel *to_hx83112a_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct hx83112a_panel, panel);
+}
+
+static void hx83112a_reset(struct hx83112a_panel *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	msleep(20);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	msleep(20);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	msleep(50);
+}
+
+static int hx83112a_on(struct hx83112a_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETEXTC, 0x83, 0x11, 0x2a);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETPOWER1,
+			       0x08, 0x28, 0x28, 0x83, 0x83, 0x4c, 0x4f, 0x33);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDISP,
+			       0x00, 0x02, 0x00, 0x90, 0x24, 0x00, 0x08, 0x19,
+			       0xea, 0x11, 0x11, 0x00, 0x11, 0xa3);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDRV,
+			       0x58, 0x68, 0x58, 0x68, 0x0f, 0xef, 0x0b, 0xc0,
+			       0x0b, 0xc0, 0x0b, 0xc0, 0x00, 0xff, 0x00, 0xff,
+			       0x00, 0x00, 0x14, 0x15, 0x00, 0x29, 0x11, 0x07,
+			       0x12, 0x00, 0x29);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDRV,
+			       0x00, 0x12, 0x12, 0x11, 0x88, 0x12, 0x12, 0x00,
+			       0x53);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDGCLUT,
+			       0xff, 0xfe, 0xfb, 0xf8, 0xf4, 0xf1, 0xed, 0xe6,
+			       0xe2, 0xde, 0xdb, 0xd6, 0xd3, 0xcf, 0xca, 0xc6,
+			       0xc2, 0xbe, 0xb9, 0xb0, 0xa7, 0x9e, 0x96, 0x8d,
+			       0x84, 0x7c, 0x74, 0x6b, 0x62, 0x5a, 0x51, 0x49,
+			       0x41, 0x39, 0x31, 0x29, 0x21, 0x19, 0x12, 0x0a,
+			       0x06, 0x05, 0x02, 0x01, 0x00, 0x00, 0xc9, 0xb3,
+			       0x08, 0x0e, 0xf2, 0xe1, 0x59, 0xf4, 0x22, 0xad,
+			       0x40);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDGCLUT,
+			       0xff, 0xfe, 0xfb, 0xf8, 0xf4, 0xf1, 0xed, 0xe6,
+			       0xe2, 0xde, 0xdb, 0xd6, 0xd3, 0xcf, 0xca, 0xc6,
+			       0xc2, 0xbe, 0xb9, 0xb0, 0xa7, 0x9e, 0x96, 0x8d,
+			       0x84, 0x7c, 0x74, 0x6b, 0x62, 0x5a, 0x51, 0x49,
+			       0x41, 0x39, 0x31, 0x29, 0x21, 0x19, 0x12, 0x0a,
+			       0x06, 0x05, 0x02, 0x01, 0x00, 0x00, 0xc9, 0xb3,
+			       0x08, 0x0e, 0xf2, 0xe1, 0x59, 0xf4, 0x22, 0xad,
+			       0x40);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDGCLUT,
+			       0xff, 0xfe, 0xfb, 0xf8, 0xf4, 0xf1, 0xed, 0xe6,
+			       0xe2, 0xde, 0xdb, 0xd6, 0xd3, 0xcf, 0xca, 0xc6,
+			       0xc2, 0xbe, 0xb9, 0xb0, 0xa7, 0x9e, 0x96, 0x8d,
+			       0x84, 0x7c, 0x74, 0x6b, 0x62, 0x5a, 0x51, 0x49,
+			       0x41, 0x39, 0x31, 0x29, 0x21, 0x19, 0x12, 0x0a,
+			       0x06, 0x05, 0x02, 0x01, 0x00, 0x00, 0xc9, 0xb3,
+			       0x08, 0x0e, 0xf2, 0xe1, 0x59, 0xf4, 0x22, 0xad,
+			       0x40);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETDGCLUT, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETTCON,
+			       0x70, 0x00, 0x04, 0xe0, 0x33, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETPANEL, 0x08);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETPOWER2, 0x2b, 0x2b);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP0,
+			       0x80, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x08,
+			       0x08, 0x03, 0x03, 0x22, 0x18, 0x07, 0x07, 0x07,
+			       0x07, 0x32, 0x10, 0x06, 0x00, 0x06, 0x32, 0x10,
+			       0x07, 0x00, 0x07, 0x32, 0x19, 0x31, 0x09, 0x31,
+			       0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x08,
+			       0x09, 0x30, 0x00, 0x00, 0x00, 0x06, 0x0d, 0x00,
+			       0x0f);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP0,
+			       0x00, 0x00, 0x19, 0x10, 0x00, 0x0a, 0x00, 0x81);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP1,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0xc0, 0xc0, 0x18, 0x18, 0x19, 0x19, 0x18, 0x18,
+			       0x40, 0x40, 0x18, 0x18, 0x18, 0x18, 0x3f, 0x3f,
+			       0x28, 0x28, 0x24, 0x24, 0x02, 0x03, 0x02, 0x03,
+			       0x00, 0x01, 0x00, 0x01, 0x31, 0x31, 0x31, 0x31,
+			       0x30, 0x30, 0x30, 0x30, 0x2f, 0x2f, 0x2f, 0x2f);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP2,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x40, 0x40, 0x18, 0x18, 0x18, 0x18, 0x19, 0x19,
+			       0x40, 0x40, 0x18, 0x18, 0x18, 0x18, 0x3f, 0x3f,
+			       0x24, 0x24, 0x28, 0x28, 0x01, 0x00, 0x01, 0x00,
+			       0x03, 0x02, 0x03, 0x02, 0x31, 0x31, 0x31, 0x31,
+			       0x30, 0x30, 0x30, 0x30, 0x2f, 0x2f, 0x2f, 0x2f);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP3,
+			       0xaa, 0xea, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xea,
+			       0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xea, 0xab, 0xaa,
+			       0xaa, 0xaa, 0xaa, 0xea, 0xab, 0xaa, 0xaa, 0xaa);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP3,
+			       0xaa, 0x2e, 0x28, 0x00, 0x00, 0x00, 0xaa, 0x2e,
+			       0x28, 0x00, 0x00, 0x00, 0xaa, 0xee, 0xaa, 0xaa,
+			       0xaa, 0xaa, 0xaa, 0xee, 0xaa, 0xaa, 0xaa, 0xaa);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP3,
+			       0xaa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xaa, 0xff,
+			       0xff, 0xff, 0xff, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETGIP3,
+			       0xaa, 0xaa, 0xea, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+			       0xea, 0xaa, 0xaa, 0xaa, 0xaa, 0xff, 0xff, 0xff,
+			       0xff, 0xff, 0xaa, 0xff, 0xff, 0xff, 0xff, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETTP1,
+			       0x0e, 0x0e, 0x1e, 0x65, 0x1c, 0x65, 0x00, 0x50,
+			       0x20, 0x20, 0x00, 0x00, 0x02, 0x02, 0x02, 0x05,
+			       0x14, 0x14, 0x32, 0xb9, 0x23, 0xb9, 0x08);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETTP1,
+			       0x02, 0x00, 0xa8, 0x01, 0xa8, 0x0d, 0xa4, 0x0e);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETTP1,
+			       0x00, 0x00, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
+			       0x00, 0x00, 0x00, 0x02, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_UNKNOWN1, 0xc3);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETCLOCK, 0xd1, 0xd6);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_UNKNOWN1, 0x3f);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_UNKNOWN1, 0xc6);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_SETPTBA, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, HX83112A_UNKNOWN1, 0x3f);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(150);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(50);
+
+	return 0;
+}
+
+static int hx83112a_disable(struct drm_panel *panel)
+{
+	struct hx83112a_panel *ctx = to_hx83112a_panel(panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	return 0;
+}
+
+static int hx83112a_prepare(struct drm_panel *panel)
+{
+	struct hx83112a_panel *ctx = to_hx83112a_panel(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	hx83112a_reset(ctx);
+
+	ret = hx83112a_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hx83112a_unprepare(struct drm_panel *panel)
+{
+	struct hx83112a_panel *ctx = to_hx83112a_panel(panel);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	return 0;
+}
+
+static const struct drm_display_mode hx83112a_mode = {
+	.clock = (1080 + 28 + 8 + 8) * (2340 + 27 + 5 + 5) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 8,
+	.htotal = 1080 + 28 + 8 + 8,
+	.vdisplay = 2340,
+	.vsync_start = 2340 + 27,
+	.vsync_end = 2340 + 27 + 5,
+	.vtotal = 2340 + 27 + 5 + 5,
+	.width_mm = 67,
+	.height_mm = 145,
+	.type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int hx83112a_get_modes(struct drm_panel *panel,
+				  struct drm_connector *connector)
+{
+	return drm_connector_helper_get_modes_fixed(connector, &hx83112a_mode);
+}
+
+static const struct drm_panel_funcs hx83112a_panel_funcs = {
+	.prepare = hx83112a_prepare,
+	.unprepare = hx83112a_unprepare,
+	.disable = hx83112a_disable,
+	.get_modes = hx83112a_get_modes,
+};
+
+static int hx83112a_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct hx83112a_panel *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supplies[0].supply = "vdd1";
+	ctx->supplies[1].supply = "vsn";
+	ctx->supplies[2].supply = "vsp";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_VIDEO_HSE |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &hx83112a_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void hx83112a_remove(struct mipi_dsi_device *dsi)
+{
+	struct hx83112a_panel *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id hx83112a_of_match[] = {
+	{ .compatible = "djn,9a-3r063-1102b" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hx83112a_of_match);
+
+static struct mipi_dsi_driver hx83112a_driver = {
+	.probe = hx83112a_probe,
+	.remove = hx83112a_remove,
+	.driver = {
+		.name = "panel-himax-hx83112a",
+		.of_match_table = hx83112a_of_match,
+	},
+};
+module_mipi_dsi_driver(hx83112a_driver);
+
+MODULE_DESCRIPTION("DRM driver for hx83112a-equipped DSI panels");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
index 8e0f5c3e3b..1a26205701 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -645,26 +645,17 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
 		return -EINVAL;
 
 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(ctx->reset_gpio)) {
-		dev_err(dev, "cannot get reset gpio\n");
-		return PTR_ERR(ctx->reset_gpio);
-	}
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "cannot get reset gpio\n");
 
 	ctx->vci = devm_regulator_get(dev, "vci");
-	if (IS_ERR(ctx->vci)) {
-		ret = PTR_ERR(ctx->vci);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to request vci regulator: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ctx->vci))
+		return dev_err_probe(dev, PTR_ERR(ctx->vci), "Failed to request vci regulator\n");
 
 	ctx->iovcc = devm_regulator_get(dev, "iovcc");
-	if (IS_ERR(ctx->iovcc)) {
-		ret = PTR_ERR(ctx->iovcc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ctx->iovcc))
+		return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+				     "Failed to request iovcc regulator\n");
 
 	mipi_dsi_set_drvdata(dsi, ctx);
 
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
index 39e408c9f7..a4c9a5cb98 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
@@ -11,6 +11,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/regulator/consumer.h>
 
 #include <video/mipi_display.h>
@@ -21,25 +22,224 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
+struct ltk500hd1829_cmd {
+	char cmd;
+	char data;
+};
+
+struct ltk500hd1829_desc {
+	const struct drm_display_mode *mode;
+	const struct ltk500hd1829_cmd *init;
+	unsigned int num_init;
+};
+
 struct ltk500hd1829 {
 	struct device *dev;
 	struct drm_panel panel;
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
+	const struct ltk500hd1829_desc *panel_desc;
 	bool prepared;
 };
 
-struct ltk500hd1829_cmd {
-	char cmd;
-	char data;
+static const struct ltk500hd1829_cmd ltk101b4029w_init[] = {
+	/* Page0 */
+	{ 0xE0, 0x00 },
+	/* PASSWORD */
+	{ 0xE1, 0x93 },
+	{ 0xE2, 0x65 },
+	{ 0xE3, 0xF8 },
+	{ 0x80, 0x03 }, /* 0X03:4-LANE; 0X02:3-LANE; 0X01:2-LANE */
+	/* Page1 */
+	{ 0xE0, 0x01 },
+	/* Set VCOM */
+	{ 0x00, 0x00 },
+	{ 0x01, 0x6F },
+	/* Set Gamma Power, VGMP,VGMN,VGSP,VGSN */
+	{ 0x17, 0x00 },
+	{ 0x18, 0xAF }, /* 4.3V */
+	{ 0x19, 0x01 }, /* 0.3V */
+	{ 0x1A, 0x00 },
+	{ 0x1B, 0xAF }, /* 4.3V */
+	{ 0x1C, 0x01 }, /* 0.3V */
+	/* Set Gate Power */
+	{ 0x1F, 0x3E }, /* VGH_R  = 15V */
+	{ 0x20, 0x28 }, /* VGL_R  = -12V */
+	{ 0x21, 0x28 }, /* VGL_R2 = -12V */
+	{ 0x22, 0x7E },
+	/* SETPANEL */
+	{ 0x35, 0x26 },
+	{ 0x37, 0x09 },
+	/* SET RGBCYC */
+	{ 0x38, 0x04 },
+	{ 0x39, 0x00 },
+	{ 0x3A, 0x01 },
+	{ 0x3C, 0x7C },
+	{ 0x3D, 0xFF },
+	{ 0x3E, 0xFF },
+	{ 0x3F, 0x7F },
+	/* Set TCON */
+	{ 0x40, 0x06 }, /* RSO = 800 RGB */
+	{ 0x41, 0xA0 }, /* LN = 640->1280 line */
+	{ 0x42, 0x81 },
+	{ 0x43, 0x08 }, /* VFP = 8 */
+	{ 0x44, 0x0B }, /* VBP = 12 */
+	{ 0x45, 0x28 }, /* HBP = 40 */
+	/* power voltage */
+	{ 0x55, 0x0F }, /* DCDCM = 0001, JD PWR_IC */
+	{ 0x57, 0x69 },
+	{ 0x59, 0x0A }, /* VCL = -2.9V */
+	{ 0x5A, 0x28 }, /* VGH = 15V */
+	{ 0x5B, 0x14 }, /* VGL = -11V */
+	/* Gamma */
+	{ 0x5D, 0x7C },
+	{ 0x5E, 0x65 },
+	{ 0x5F, 0x55 },
+	{ 0x60, 0x47 },
+	{ 0x61, 0x43 },
+	{ 0x62, 0x32 },
+	{ 0x63, 0x34 },
+	{ 0x64, 0x1C },
+	{ 0x65, 0x33 },
+	{ 0x66, 0x31 },
+	{ 0x67, 0x30 },
+	{ 0x68, 0x4E },
+	{ 0x69, 0x3C },
+	{ 0x6A, 0x44 },
+	{ 0x6B, 0x35 },
+	{ 0x6C, 0x31 },
+	{ 0x6D, 0x23 },
+	{ 0x6E, 0x11 },
+	{ 0x6F, 0x00 },
+	{ 0x70, 0x7C },
+	{ 0x71, 0x65 },
+	{ 0x72, 0x55 },
+	{ 0x73, 0x47 },
+	{ 0x74, 0x43 },
+	{ 0x75, 0x32 },
+	{ 0x76, 0x34 },
+	{ 0x77, 0x1C },
+	{ 0x78, 0x33 },
+	{ 0x79, 0x31 },
+	{ 0x7A, 0x30 },
+	{ 0x7B, 0x4E },
+	{ 0x7C, 0x3C },
+	{ 0x7D, 0x44 },
+	{ 0x7E, 0x35 },
+	{ 0x7F, 0x31 },
+	{ 0x80, 0x23 },
+	{ 0x81, 0x11 },
+	{ 0x82, 0x00 },
+	 /* Page2, for GIP */
+	{ 0xE0, 0x02 },
+	/* GIP_L Pin mapping */
+	{ 0x00, 0x1E },
+	{ 0x01, 0x1E },
+	{ 0x02, 0x41 },
+	{ 0x03, 0x41 },
+	{ 0x04, 0x43 },
+	{ 0x05, 0x43 },
+	{ 0x06, 0x1F },
+	{ 0x07, 0x1F },
+	{ 0x08, 0x35 },
+	{ 0x09, 0x1F },
+	{ 0x0A, 0x15 },
+	{ 0x0B, 0x15 },
+	{ 0x0C, 0x1F },
+	{ 0x0D, 0x47 },
+	{ 0x0E, 0x47 },
+	{ 0x0F, 0x45 },
+	{ 0x10, 0x45 },
+	{ 0x11, 0x4B },
+	{ 0x12, 0x4B },
+	{ 0x13, 0x49 },
+	{ 0x14, 0x49 },
+	{ 0x15, 0x1F },
+	/* GIP_R Pin mapping */
+	{ 0x16, 0x1E },
+	{ 0x17, 0x1E },
+	{ 0x18, 0x40 },
+	{ 0x19, 0x40 },
+	{ 0x1A, 0x42 },
+	{ 0x1B, 0x42 },
+	{ 0x1C, 0x1F },
+	{ 0x1D, 0x1F },
+	{ 0x1E, 0x35 },
+	{ 0x1F, 0x1F },
+	{ 0x20, 0x15 },
+	{ 0x21, 0x15 },
+	{ 0x22, 0x1f },
+	{ 0x23, 0x46 },
+	{ 0x24, 0x46 },
+	{ 0x25, 0x44 },
+	{ 0x26, 0x44 },
+	{ 0x27, 0x4A },
+	{ 0x28, 0x4A },
+	{ 0x29, 0x48 },
+	{ 0x2A, 0x48 },
+	{ 0x2B, 0x1F },
+	/* GIP Timing */
+	{ 0x58, 0x40 },
+	{ 0x5B, 0x30 },
+	{ 0x5C, 0x03 },
+	{ 0x5D, 0x30 },
+	{ 0x5E, 0x01 },
+	{ 0x5F, 0x02 },
+	{ 0x63, 0x14 },
+	{ 0x64, 0x6A },
+	{ 0x67, 0x73 },
+	{ 0x68, 0x05 },
+	{ 0x69, 0x14 },
+	{ 0x6A, 0x6A },
+	{ 0x6B, 0x08 },
+	{ 0x6C, 0x00 },
+	{ 0x6D, 0x00 },
+	{ 0x6E, 0x00 },
+	{ 0x6F, 0x88 },
+	{ 0x77, 0xDD },
+	{ 0x79, 0x0E },
+	{ 0x7A, 0x03 },
+	{ 0x7D, 0x14 },
+	{ 0x7E, 0x6A },
+	/* Page4 */
+	{ 0xE0, 0x04 },
+	{ 0x09, 0x11 },
+	{ 0x0E, 0x48 },
+	{ 0x2B, 0x2B },
+	{ 0x2D, 0x03 },
+	{ 0x2E, 0x44 },
+	/* Page0 */
+	{ 0xE0, 0x00 },
+	{ 0xE6, 0x02 },
+	{ 0xE7, 0x0C },
+};
+
+static const struct drm_display_mode ltk101b4029w_mode = {
+	.hdisplay	= 800,
+	.hsync_start	= 800 + 18,
+	.hsync_end	= 800 + 18 + 18,
+	.htotal		= 800 + 18 + 18 + 18,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 24,
+	.vsync_end	= 1280 + 24 + 4,
+	.vtotal		= 1280 + 24 + 4 + 8,
+	.clock		= 67330,
+	.width_mm	= 136,
+	.height_mm	= 218,
+};
+
+static const struct ltk500hd1829_desc ltk101b4029w_data = {
+	.mode = &ltk101b4029w_mode,
+	.init = ltk101b4029w_init,
+	.num_init = ARRAY_SIZE(ltk101b4029w_init),
 };
 
 /*
  * There is no description in the Reference Manual about these commands.
  * We received them from the vendor, so just use them as is.
  */
-static const struct ltk500hd1829_cmd init_code[] = {
+static const struct ltk500hd1829_cmd ltk500hd1829_init[] = {
 	{ 0xE0, 0x00 },
 	{ 0xE1, 0x93 },
 	{ 0xE2, 0x65 },
@@ -260,6 +460,26 @@ static const struct ltk500hd1829_cmd init_code[] = {
 	{ 0x35, 0x00 },
 };
 
+static const struct drm_display_mode ltk500hd1829_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 50,
+	.hsync_end	= 720 + 50 + 50,
+	.htotal		= 720 + 50 + 50 + 50,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 30,
+	.vsync_end	= 1280 + 30 + 4,
+	.vtotal		= 1280 + 30 + 4 + 12,
+	.clock		= 69217,
+	.width_mm	= 62,
+	.height_mm	= 110,
+};
+
+static const struct ltk500hd1829_desc ltk500hd1829_data = {
+	.mode = &ltk500hd1829_mode,
+	.init = ltk500hd1829_init,
+	.num_init = ARRAY_SIZE(ltk500hd1829_init),
+};
+
 static inline
 struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel)
 {
@@ -324,8 +544,8 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
 	/* tRT: >= 5ms */
 	usleep_range(5000, 6000);
 
-	for (i = 0; i < ARRAY_SIZE(init_code); i++) {
-		ret = mipi_dsi_generic_write(dsi, &init_code[i],
+	for (i = 0; i < ctx->panel_desc->num_init; i++) {
+		ret = mipi_dsi_generic_write(dsi, &ctx->panel_desc->init[i],
 					     sizeof(struct ltk500hd1829_cmd));
 		if (ret < 0) {
 			dev_err(panel->dev, "failed to write init cmds: %d\n", ret);
@@ -359,31 +579,17 @@ disable_vcc:
 	return ret;
 }
 
-static const struct drm_display_mode default_mode = {
-	.hdisplay	= 720,
-	.hsync_start	= 720 + 50,
-	.hsync_end	= 720 + 50 + 50,
-	.htotal		= 720 + 50 + 50 + 50,
-	.vdisplay	= 1280,
-	.vsync_start	= 1280 + 30,
-	.vsync_end	= 1280 + 30 + 4,
-	.vtotal		= 1280 + 30 + 4 + 12,
-	.clock		= 69217,
-	.width_mm	= 62,
-	.height_mm	= 110,
-};
-
 static int ltk500hd1829_get_modes(struct drm_panel *panel,
 				  struct drm_connector *connector)
 {
 	struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
 	struct drm_display_mode *mode;
 
-	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
 	if (!mode) {
 		dev_err(ctx->dev, "failed to add mode %ux%u@%u\n",
-			default_mode.hdisplay, default_mode.vdisplay,
-			drm_mode_vrefresh(&default_mode));
+			ctx->panel_desc->mode->hdisplay, ctx->panel_desc->mode->vdisplay,
+			drm_mode_vrefresh(ctx->panel_desc->mode));
 		return -ENOMEM;
 	}
 
@@ -413,6 +619,10 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
 	if (!ctx)
 		return -ENOMEM;
 
+	ctx->panel_desc = of_device_get_match_data(dev);
+	if (!ctx->panel_desc)
+		return -EINVAL;
+
 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset gpio\n");
@@ -492,7 +702,14 @@ static void ltk500hd1829_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id ltk500hd1829_of_match[] = {
-	{ .compatible = "leadtek,ltk500hd1829", },
+	{
+		.compatible = "leadtek,ltk101b4029w",
+		.data = &ltk101b4029w_data,
+	},
+	{
+		.compatible = "leadtek,ltk500hd1829",
+		.data = &ltk500hd1829_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match);
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index 83a9cf53d2..d3bfdfc9cf 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -36,6 +36,9 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
+#define NT35510_CMD_CORRECT_GAMMA BIT(0)
+#define NT35510_CMD_CONTROL_DISPLAY BIT(1)
+
 #define MCS_CMD_MAUCCTR		0xF0 /* Manufacturer command enable */
 #define MCS_CMD_READ_ID1	0xDA
 #define MCS_CMD_READ_ID2	0xDB
@@ -112,18 +115,33 @@
 /* AVDD and AVEE setting 3 bytes */
 #define NT35510_P1_AVDD_LEN 3
 #define NT35510_P1_AVEE_LEN 3
+#define NT35510_P1_VCL_LEN 3
 #define NT35510_P1_VGH_LEN 3
 #define NT35510_P1_VGL_LEN 3
 #define NT35510_P1_VGP_LEN 3
 #define NT35510_P1_VGN_LEN 3
+#define NT35510_P1_VCMOFF_LEN 2
 /* BT1CTR thru BT5CTR setting 3 bytes */
 #define NT35510_P1_BT1CTR_LEN 3
 #define NT35510_P1_BT2CTR_LEN 3
+#define NT35510_P1_BT3CTR_LEN 3
 #define NT35510_P1_BT4CTR_LEN 3
 #define NT35510_P1_BT5CTR_LEN 3
 /* 52 gamma parameters times two per color: positive and negative */
 #define NT35510_P1_GAMMA_LEN 52
 
+#define NT35510_WRCTRLD_BCTRL BIT(5)
+#define NT35510_WRCTRLD_A BIT(4)
+#define NT35510_WRCTRLD_DD BIT(3)
+#define NT35510_WRCTRLD_BL BIT(2)
+#define NT35510_WRCTRLD_DB BIT(1)
+#define NT35510_WRCTRLD_G BIT(0)
+
+#define NT35510_WRCABC_OFF 0
+#define NT35510_WRCABC_UI_MODE 1
+#define NT35510_WRCABC_STILL_MODE 2
+#define NT35510_WRCABC_MOVING_MODE 3
+
 /**
  * struct nt35510_config - the display-specific NT35510 configuration
  *
@@ -172,6 +190,14 @@ struct nt35510_config {
 	 */
 	const struct drm_display_mode mode;
 	/**
+	 * @mode_flags: DSI operation mode related flags
+	 */
+	unsigned long mode_flags;
+	/**
+	 * @cmds: enable DSI commands
+	 */
+	u32 cmds;
+	/**
 	 * @avdd: setting for AVDD ranging from 0x00 = 6.5V to 0x14 = 4.5V
 	 * in 0.1V steps the default is 0x05 which means 6.0V
 	 */
@@ -221,6 +247,25 @@ struct nt35510_config {
 	 */
 	u8 bt2ctr[NT35510_P1_BT2CTR_LEN];
 	/**
+	 * @vcl: setting for VCL ranging from 0x00 = -2.5V to 0x11 = -4.0V
+	 * in 1V steps, the default is 0x00 which means -2.5V
+	 */
+	u8 vcl[NT35510_P1_VCL_LEN];
+	/**
+	 * @bt3ctr: setting for boost power control for the VCL step-up
+	 * circuit (3)
+	 * bits 0..2 in the lower nibble controls CLCK, the booster clock
+	 * frequency, the values are the same as for PCK in @bt1ctr.
+	 * bits 4..5 in the upper nibble controls BTCL, the boosting
+	 * amplification for the step-up circuit.
+	 * 0 = Disable
+	 * 1 = -0.5 x VDDB
+	 * 2 = -1 x VDDB
+	 * 3 = -2 x VDDB
+	 * The defaults are 4 and 2 yielding 0x24
+	 */
+	u8 bt3ctr[NT35510_P1_BT3CTR_LEN];
+	/**
 	 * @vgh: setting for VGH ranging from 0x00 = 7.0V to 0x0B = 18.0V
 	 * in 1V steps, the default is 0x08 which means 15V
 	 */
@@ -274,6 +319,113 @@ struct nt35510_config {
 	 */
 	u8 vgn[NT35510_P1_VGN_LEN];
 	/**
+	 * @vcmoff: setting the DC VCOM offset voltage
+	 * The first byte contains bit 8 of VCM in bit 0 and VCMOFFSEL in bit 4.
+	 * The second byte contains bits 0..7 of VCM.
+	 * VCMOFFSEL the common voltage offset mode.
+	 * VCMOFFSEL 0x00 = VCOM .. 0x01 Gamma.
+	 * The default is 0x00.
+	 * VCM the VCOM output voltage (VCMOFFSEL = 0) or the internal register
+	 * offset for gamma voltage (VCMOFFSEL = 1).
+	 * VCM 0x00 = 0V/0 .. 0x118 = 3.5V/280 in steps of 12.5mV/1step
+	 * The default is 0x00 = 0V/0.
+	 */
+	u8 vcmoff[NT35510_P1_VCMOFF_LEN];
+	/**
+	 * @dopctr: setting optional control for display
+	 * ERR bits 0..1 in the first byte is the ERR pin output signal setting.
+	 * 0 = Disable, ERR pin output low
+	 * 1 = ERR pin output CRC error only
+	 * 2 = ERR pin output ECC error only
+	 * 3 = ERR pin output CRC and ECC error
+	 * The default is 0.
+	 * N565 bit 2 in the first byte is the 16-bit/pixel format selection.
+	 * 0 = R[4:0] + G[5:3] & G[2:0] + B[4:0]
+	 * 1 = G[2:0] + R[4:0] & B[4:0] + G[5:3]
+	 * The default is 0.
+	 * DIS_EoTP_HS bit 3 in the first byte is "DSI protocol violation" error
+	 * reporting.
+	 * 0 = reporting when error
+	 * 1 = not reporting when error
+	 * DSIM bit 4 in the first byte is the video mode data type enable
+	 * 0 = Video mode data type disable
+	 * 1 = Video mode data type enable
+	 * The default is 0.
+	 * DSIG bit 5 int the first byte is the generic r/w data type enable
+	 * 0 = Generic r/w disable
+	 * 1 = Generic r/w enable
+	 * The default is 0.
+	 * DSITE bit 6 in the first byte is TE line enable
+	 * 0 = TE line is disabled
+	 * 1 = TE line is enabled
+	 * The default is 0.
+	 * RAMKP bit 7 in the first byte is the frame memory keep/loss in
+	 * sleep-in mode
+	 * 0 = contents loss in sleep-in
+	 * 1 = contents keep in sleep-in
+	 * The default is 0.
+	 * CRL bit 1 in the second byte is the source driver data shift
+	 * direction selection. This bit is XOR operation with bit RSMX
+	 * of 3600h command.
+	 * 0 (RMSX = 0) = S1 -> S1440
+	 * 0 (RMSX = 1) = S1440 -> S1
+	 * 1 (RMSX = 0) = S1440 -> S1
+	 * 1 (RMSX = 1) = S1 -> S1440
+	 * The default is 0.
+	 * CTB bit 2 in the second byte is the vertical scanning direction
+	 * selection for gate control signals. This bit is XOR operation
+	 * with bit ML of 3600h command.
+	 * 0 (ML = 0) = Forward (top -> bottom)
+	 * 0 (ML = 1) = Reverse (bottom -> top)
+	 * 1 (ML = 0) = Reverse (bottom -> top)
+	 * 1 (ML = 1) = Forward (top -> bottom)
+	 * The default is 0.
+	 * CRGB bit 3 in the second byte is RGB-BGR order selection. This
+	 * bit is XOR operation with bit RGB of 3600h command.
+	 * 0 (RGB = 0) = RGB/Normal
+	 * 0 (RGB = 1) = BGR/RB swap
+	 * 1 (RGB = 0) = BGR/RB swap
+	 * 1 (RGB = 1) = RGB/Normal
+	 * The default is 0.
+	 * TE_PWR_SEL bit 4 in the second byte is the TE output voltage
+	 * level selection (only valid when DSTB_SEL = 0 or DSTB_SEL = 1,
+	 * VSEL = High and VDDI = 1.665~3.3V).
+	 * 0 = TE output voltage level is VDDI
+	 * 1 = TE output voltage level is VDDA
+	 * The default is 0.
+	 */
+	u8 dopctr[NT35510_P0_DOPCTR_LEN];
+	/**
+	 * @madctl: Memory data access control
+	 * RSMY bit 0 is flip vertical. Flips the display image top to down.
+	 * RSMX bit 1 is flip horizontal. Flips the display image left to right.
+	 * MH bit 2 is the horizontal refresh order.
+	 * RGB bit 3 is the RGB-BGR order.
+	 * 0 = RGB color sequence
+	 * 1 = BGR color sequence
+	 * ML bit 4 is the vertical refresh order.
+	 * MV bit 5 is the row/column exchange.
+	 * MX bit 6 is the column address order.
+	 * MY bit 7 is the row address order.
+	 */
+	u8 madctl;
+	/**
+	 * @sdhdtctr: source output data hold time
+	 * 0x00..0x3F = 0..31.5us in steps of 0.5us
+	 * The default is 0x05 = 2.5us.
+	 */
+	u8 sdhdtctr;
+	/**
+	 * @gseqctr: EQ control for gate signals
+	 * GFEQ_XX[3:0]: time setting of EQ step for falling edge in steps
+	 * of 0.5us.
+	 * The default is 0x07 = 3.5us
+	 * GREQ_XX[7:4]: time setting of EQ step for rising edge in steps
+	 * of 0.5us.
+	 * The default is 0x07 = 3.5us
+	 */
+	u8 gseqctr[NT35510_P0_GSEQCTR_LEN];
+	/**
 	 * @sdeqctr: Source driver control settings, first byte is
 	 * 0 for mode 1 and 1 for mode 2. Mode 1 uses two steps and
 	 * mode 2 uses three steps meaning EQS3 is not used in mode
@@ -343,6 +495,43 @@ struct nt35510_config {
 	 * @gamma_corr_neg_b: Blue gamma correction parameters, negative
 	 */
 	u8 gamma_corr_neg_b[NT35510_P1_GAMMA_LEN];
+	/**
+	 * @wrdisbv: write display brightness
+	 * 0x00 value means the lowest brightness and 0xff value means
+	 * the highest brightness.
+	 * The default is 0x00.
+	 */
+	u8 wrdisbv;
+	/**
+	 * @wrctrld: write control display
+	 * G bit 0 selects gamma curve: 0 = Manual, 1 = Automatic
+	 * DB bit 1 selects display brightness: 0 = Manual, 1 = Automatic
+	 * BL bit 2 controls backlight control: 0 = Off, 1 = On
+	 * DD bit 3 controls display dimming: 0 = Off, 1 = On
+	 * A bit 4 controls LABC block: 0 = Off, 1 = On
+	 * BCTRL bit 5 controls brightness block: 0 = Off, 1 = On
+	 */
+	u8 wrctrld;
+	/**
+	 * @wrcabc: write content adaptive brightness control
+	 * There is possible to use 4 different modes for content adaptive
+	 * image functionality:
+	 * 0: Off
+	 * 1: User Interface Image (UI-Mode)
+	 * 2: Still Picture Image (Still-Mode)
+	 * 3: Moving Picture Image (Moving-Mode)
+	 * The default is 0
+	 */
+	u8 wrcabc;
+	/**
+	 * @wrcabcmb: write CABC minimum brightness
+	 * Set the minimum brightness value of the display for CABC
+	 * function.
+	 * 0x00 value means the lowest brightness for CABC and 0xff
+	 * value means the highest brightness for CABC.
+	 * The default is 0x00.
+	 */
+	u8 wrcabcmb;
 };
 
 /**
@@ -486,6 +675,16 @@ static int nt35510_setup_power(struct nt35510 *nt)
 				nt->conf->bt2ctr);
 	if (ret)
 		return ret;
+	ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVCL,
+				NT35510_P1_VCL_LEN,
+				nt->conf->vcl);
+	if (ret)
+		return ret;
+	ret = nt35510_send_long(nt, dsi, NT35510_P1_BT3CTR,
+				NT35510_P1_BT3CTR_LEN,
+				nt->conf->bt3ctr);
+	if (ret)
+		return ret;
 	ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGH,
 				NT35510_P1_VGH_LEN,
 				nt->conf->vgh);
@@ -522,6 +721,12 @@ static int nt35510_setup_power(struct nt35510 *nt)
 	if (ret)
 		return ret;
 
+	ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVCMOFF,
+				NT35510_P1_VCMOFF_LEN,
+				nt->conf->vcmoff);
+	if (ret)
+		return ret;
+
 	/* Typically 10 ms */
 	usleep_range(10000, 20000);
 
@@ -536,46 +741,28 @@ static int nt35510_setup_display(struct nt35510 *nt)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
 	const struct nt35510_config *conf = nt->conf;
-	u8 dopctr[NT35510_P0_DOPCTR_LEN];
-	u8 gseqctr[NT35510_P0_GSEQCTR_LEN];
 	u8 dpfrctr[NT35510_P0_DPFRCTR1_LEN];
-	/* FIXME: set up any rotation (assume none for now) */
-	u8 addr_mode = NT35510_ROTATE_0_SETTING;
-	u8 val;
 	int ret;
 
-	/* Enable TE, EoTP and RGB pixel format */
-	dopctr[0] = NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP |
-		NT35510_DOPCTR_0_N565;
-	dopctr[1] = NT35510_DOPCTR_1_CTB;
 	ret = nt35510_send_long(nt, dsi, NT35510_P0_DOPCTR,
 				NT35510_P0_DOPCTR_LEN,
-				dopctr);
+				conf->dopctr);
 	if (ret)
 		return ret;
 
-	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &addr_mode,
-				 sizeof(addr_mode));
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &conf->madctl,
+				 sizeof(conf->madctl));
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Source data hold time, default 0x05 = 2.5us
-	 * 0x00..0x3F = 0 .. 31.5us in steps of 0.5us
-	 * 0x0A = 5us
-	 */
-	val = 0x0A;
-	ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &val,
-				 sizeof(val));
+	ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &conf->sdhdtctr,
+				 sizeof(conf->sdhdtctr));
 	if (ret < 0)
 		return ret;
 
-	/* EQ control for gate signals, 0x00 = 0 us */
-	gseqctr[0] = 0x00;
-	gseqctr[1] = 0x00;
 	ret = nt35510_send_long(nt, dsi, NT35510_P0_GSEQCTR,
 				NT35510_P0_GSEQCTR_LEN,
-				gseqctr);
+				conf->gseqctr);
 	if (ret)
 		return ret;
 
@@ -719,36 +906,38 @@ static int nt35510_power_on(struct nt35510 *nt)
 	if (ret)
 		return ret;
 
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_pos_r);
-	if (ret)
-		return ret;
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_pos_g);
-	if (ret)
-		return ret;
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_pos_b);
-	if (ret)
-		return ret;
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_neg_r);
-	if (ret)
-		return ret;
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_neg_g);
-	if (ret)
-		return ret;
-	ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG,
-				NT35510_P1_GAMMA_LEN,
-				nt->conf->gamma_corr_neg_b);
-	if (ret)
-		return ret;
+	if (nt->conf->cmds & NT35510_CMD_CORRECT_GAMMA) {
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_pos_r);
+		if (ret)
+			return ret;
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_pos_g);
+		if (ret)
+			return ret;
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_pos_b);
+		if (ret)
+			return ret;
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_neg_r);
+		if (ret)
+			return ret;
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_neg_g);
+		if (ret)
+			return ret;
+		ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG,
+					NT35510_P1_GAMMA_LEN,
+					nt->conf->gamma_corr_neg_b);
+		if (ret)
+			return ret;
+	}
 
 	/* Set up stuff in  manufacturer control, page 0 */
 	ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR,
@@ -827,6 +1016,26 @@ static int nt35510_prepare(struct drm_panel *panel)
 	/* Up to 120 ms */
 	usleep_range(120000, 150000);
 
+	if (nt->conf->cmds & NT35510_CMD_CONTROL_DISPLAY) {
+		ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+					 &nt->conf->wrctrld,
+					 sizeof(nt->conf->wrctrld));
+		if (ret < 0)
+			return ret;
+
+		ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_POWER_SAVE,
+					 &nt->conf->wrcabc,
+					 sizeof(nt->conf->wrcabc));
+		if (ret < 0)
+			return ret;
+
+		ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_CABC_MIN_BRIGHTNESS,
+					 &nt->conf->wrcabcmb,
+					 sizeof(nt->conf->wrcabcmb));
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = mipi_dsi_dcs_set_display_on(dsi);
 	if (ret) {
 		dev_err(nt->dev, "failed to turn display on (%d)\n", ret);
@@ -896,7 +1105,6 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
 	 */
 	dsi->hs_rate = 349440000;
 	dsi->lp_rate = 9600000;
-	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
 
 	/*
 	 * Every new incarnation of this display must have a unique
@@ -908,6 +1116,8 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
 		return -ENODEV;
 	}
 
+	dsi->mode_flags = nt->conf->mode_flags;
+
 	nt->supplies[0].supply = "vdd"; /* 2.3-4.8 V */
 	nt->supplies[1].supply = "vddi"; /* 1.65-3.3V */
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->supplies),
@@ -923,7 +1133,7 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
 	if (ret)
 		return ret;
 
-	nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
+	nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(nt->reset_gpio)) {
 		dev_err(dev, "error getting RESET GPIO\n");
 		return PTR_ERR(nt->reset_gpio);
@@ -952,7 +1162,10 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
 			return PTR_ERR(bl);
 		}
 		bl->props.max_brightness = 255;
-		bl->props.brightness = 255;
+		if (nt->conf->cmds & NT35510_CMD_CONTROL_DISPLAY)
+			bl->props.brightness = nt->conf->wrdisbv;
+		else
+			bl->props.brightness = 255;
 		bl->props.power = FB_BLANK_POWERDOWN;
 		nt->panel.backlight = bl;
 	}
@@ -1030,6 +1243,8 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = {
 		.vtotal = 800 + 2 + 0 + 5, /* VBP = 5 */
 		.flags = 0,
 	},
+	.mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS,
+	.cmds = NT35510_CMD_CORRECT_GAMMA,
 	/* 0x09: AVDD = 5.6V */
 	.avdd = { 0x09, 0x09, 0x09 },
 	/* 0x34: PCK = Hsync/2, BTP = 2 x VDDB */
@@ -1038,6 +1253,10 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = {
 	.avee = { 0x09, 0x09, 0x09 },
 	/* 0x24: NCK = Hsync/2, BTN =  -2 x VDDB */
 	.bt2ctr = { 0x24, 0x24, 0x24 },
+	/* VBCLA: -2.5V, VBCLB: -2.5V, VBCLC: -2.5V */
+	.vcl = { 0x00, 0x00, 0x00 },
+	/* 0x24: CLCK = Hsync/2, BTN =  -1 x VDDB */
+	.bt3ctr = { 0x24, 0x24, 0x24 },
 	/* 0x05 = 12V */
 	.vgh = { 0x05, 0x05, 0x05 },
 	/* 0x24: NCKA = Hsync/2, VGH = 2 x AVDD - AVEE */
@@ -1050,6 +1269,16 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = {
 	.vgp = { 0x00, 0xA3, 0x00 },
 	/* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */
 	.vgn = { 0x00, 0xA3, 0x00 },
+	/* VCMOFFSEL = VCOM voltage offset mode, VCM = 0V */
+	.vcmoff = { 0x00, 0x00 },
+	/* Enable TE, EoTP and RGB pixel format */
+	.dopctr = { NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP |
+		    NT35510_DOPCTR_0_N565, NT35510_DOPCTR_1_CTB },
+	.madctl = NT35510_ROTATE_0_SETTING,
+	/* 0x0A: SDT = 5 us */
+	.sdhdtctr = 0x0A,
+	/* EQ control for gate signals, 0x00 = 0 us */
+	.gseqctr = { 0x00, 0x00 },
 	/* SDEQCTR: source driver EQ mode 2, 2.5 us rise time on each step */
 	.sdeqctr = { 0x01, 0x05, 0x05, 0x05 },
 	/* SDVPCTR: Normal operation off color during v porch */
@@ -1073,8 +1302,89 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = {
 	.gamma_corr_neg_b = { NT35510_GAMMA_NEG_DEFAULT },
 };
 
+static const struct nt35510_config nt35510_frida_frd400b25025 = {
+	.width_mm = 52,
+	.height_mm = 86,
+	.mode = {
+		.clock = 23000,
+		.hdisplay = 480,
+		.hsync_start = 480 + 34, /* HFP = 34 */
+		.hsync_end = 480 + 34 + 2, /* HSync = 2 */
+		.htotal = 480 + 34 + 2 + 34, /* HBP = 34 */
+		.vdisplay = 800,
+		.vsync_start = 800 + 15, /* VFP = 15 */
+		.vsync_end = 800 + 15 + 12, /* VSync = 12 */
+		.vtotal = 800 + 15 + 12 + 15, /* VBP = 15 */
+		.flags = 0,
+	},
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			MIPI_DSI_MODE_LPM,
+	.cmds = NT35510_CMD_CONTROL_DISPLAY,
+	/* 0x03: AVDD = 6.2V */
+	.avdd = { 0x03, 0x03, 0x03 },
+	/* 0x46: PCK = 2 x Hsync, BTP = 2.5 x VDDB */
+	.bt1ctr = { 0x46, 0x46, 0x46 },
+	/* 0x03: AVEE = -6.2V */
+	.avee = { 0x03, 0x03, 0x03 },
+	/* 0x36: PCK = 2 x Hsync, BTP =  2 x VDDB */
+	.bt2ctr = { 0x36, 0x36, 0x36 },
+	/* VBCLA: -2.5V, VBCLB: -2.5V, VBCLC: -3.5V */
+	.vcl = { 0x00, 0x00, 0x02 },
+	/* 0x26: CLCK = 2 x Hsync, BTN =  -1 x VDDB */
+	.bt3ctr = { 0x26, 0x26, 0x26 },
+	/* 0x09 = 16V */
+	.vgh = { 0x09, 0x09, 0x09 },
+	/* 0x36: HCK = 2 x Hsync, VGH = 2 x AVDD - AVEE */
+	.bt4ctr = { 0x36, 0x36, 0x36 },
+	/* 0x08 = -10V */
+	.vgl = { 0x08, 0x08, 0x08 },
+	/* 0x26: LCK = 2 x Hsync, VGL = AVDD + VCL - AVDD */
+	.bt5ctr = { 0x26, 0x26, 0x26 },
+	/* VGMP: 0x080 = 4.6V, VGSP = 0V */
+	.vgp = { 0x00, 0x80, 0x00 },
+	/* VGMP: 0x080 = 4.6V, VGSP = 0V */
+	.vgn = { 0x00, 0x80, 0x00 },
+	/* VCMOFFSEL = VCOM voltage offset mode, VCM = -1V */
+	.vcmoff = { 0x00, 0x50 },
+	.dopctr = { NT35510_DOPCTR_0_RAMKP | NT35510_DOPCTR_0_DSITE |
+		NT35510_DOPCTR_0_DSIG | NT35510_DOPCTR_0_DSIM |
+		NT35510_DOPCTR_0_EOTP | NT35510_DOPCTR_0_N565, 0 },
+	.madctl = NT35510_ROTATE_180_SETTING,
+	/* 0x03: SDT = 1.5 us */
+	.sdhdtctr = 0x03,
+	/* EQ control for gate signals, 0x00 = 0 us */
+	.gseqctr = { 0x00, 0x00 },
+	/* SDEQCTR: source driver EQ mode 2, 1 us rise time on each step */
+	.sdeqctr = { 0x01, 0x02, 0x02, 0x02 },
+	/* SDVPCTR: Normal operation off color during v porch */
+	.sdvpctr = 0x01,
+	/* T1: number of pixel clocks on one scanline: 0x184 = 389 clocks */
+	.t1 = 0x0184,
+	/* VBP: vertical back porch toward the panel */
+	.vbp = 0x1C,
+	/* VFP: vertical front porch toward the panel */
+	.vfp = 0x1C,
+	/* PSEL: divide pixel clock 23MHz with 1 (no clock downscaling) */
+	.psel = 0,
+	/* DPTMCTR12: 0x03: LVGL = VGLX, overlap mode, swap R->L O->E */
+	.dpmctr12 = { 0x03, 0x00, 0x00, },
+	/* write display brightness */
+	.wrdisbv = 0x7f,
+	/* write control display */
+	.wrctrld = NT35510_WRCTRLD_BCTRL | NT35510_WRCTRLD_DD |
+			NT35510_WRCTRLD_BL,
+	/* write content adaptive brightness control */
+	.wrcabc = NT35510_WRCABC_STILL_MODE,
+	/* write CABC minimum brightness */
+	.wrcabcmb = 0xff,
+};
+
 static const struct of_device_id nt35510_of_match[] = {
 	{
+		.compatible = "frida,frd400b25025",
+		.data = &nt35510_frida_frd400b25025,
+	},
+	{
 		.compatible = "hydis,hva40wv1",
 		.data = &nt35510_hydis_hva40wv1,
 	},
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36523.c b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
index a189ce2363..18bd2ee712 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36523.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c
@@ -933,8 +933,7 @@ static int j606f_boe_init_sequence(struct panel_info *pinfo)
 
 static const struct drm_display_mode elish_boe_modes[] = {
 	{
-		/* There is only one 120 Hz timing, but it doesn't work perfectly, 104 Hz preferred */
-		.clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 104 / 1000,
+		.clock = (1600 + 60 + 8 + 60) * (2560 + 26 + 4 + 168) * 120 / 1000,
 		.hdisplay = 1600,
 		.hsync_start = 1600 + 60,
 		.hsync_end = 1600 + 60 + 8,
@@ -948,8 +947,7 @@ static const struct drm_display_mode elish_boe_modes[] = {
 
 static const struct drm_display_mode elish_csot_modes[] = {
 	{
-		/* There is only one 120 Hz timing, but it doesn't work perfectly, 104 Hz preferred */
-		.clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 104 / 1000,
+		.clock = (1600 + 200 + 40 + 52) * (2560 + 26 + 4 + 168) * 120 / 1000,
 		.hdisplay = 1600,
 		.hsync_start = 1600 + 200,
 		.hsync_end = 1600 + 200 + 40,
@@ -1270,6 +1268,8 @@ static int nt36523_probe(struct mipi_dsi_device *dsi)
 		return ret;
 	}
 
+	pinfo->panel.prepare_prev_first = true;
+
 	if (pinfo->desc->has_dcs_backlight) {
 		pinfo->panel.backlight = nt36523_create_backlight(dsi);
 		if (IS_ERR(pinfo->panel.backlight))
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672e.c b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c
new file mode 100644
index 0000000000..c39fe0fc5d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+static const char * const regulator_names[] = {
+	"vddi",
+	"avdd",
+	"avee",
+};
+
+static const unsigned long regulator_enable_loads[] = {
+	62000,
+	100000,
+	100000,
+};
+
+static const unsigned long regulator_disable_loads[] = {
+	80,
+	100,
+	100,
+};
+
+struct panel_desc {
+	const struct drm_display_mode *display_mode;
+	u32 width_mm;
+	u32 height_mm;
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+	unsigned int lanes;
+	const char *panel_name;
+	int (*init_sequence)(struct mipi_dsi_device *dsi);
+};
+
+struct nt36672e_panel {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[3];
+	const struct panel_desc *desc;
+};
+
+static inline struct nt36672e_panel *to_nt36672e_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct nt36672e_panel, panel);
+}
+
+static int nt36672e_1080x2408_60hz_init(struct mipi_dsi_device *dsi)
+{
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xc0, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xc1, 0x89, 0x28, 0x00, 0x08, 0x00, 0xaa, 0x02,
+				0x0e, 0x00, 0x2b, 0x00, 0x07, 0x0d, 0xb7, 0x0c, 0xb7);
+
+	mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x1b, 0xa0);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x20);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x01, 0x66);
+	mipi_dsi_dcs_write_seq(dsi, 0x06, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0x07, 0x38);
+	mipi_dsi_dcs_write_seq(dsi, 0x2f, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, 0x69, 0x91);
+	mipi_dsi_dcs_write_seq(dsi, 0x95, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0x96, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x64);
+	mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x54);
+	mipi_dsi_dcs_write_seq(dsi, 0xf4, 0x64);
+	mipi_dsi_dcs_write_seq(dsi, 0xf5, 0x54);
+	mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x64);
+	mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x54);
+	mipi_dsi_dcs_write_seq(dsi, 0xf8, 0x64);
+	mipi_dsi_dcs_write_seq(dsi, 0xf9, 0x54);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x24);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x01, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x03, 0x0c);
+	mipi_dsi_dcs_write_seq(dsi, 0x05, 0x1d);
+	mipi_dsi_dcs_write_seq(dsi, 0x08, 0x2f);
+	mipi_dsi_dcs_write_seq(dsi, 0x09, 0x2e);
+	mipi_dsi_dcs_write_seq(dsi, 0x0a, 0x2d);
+	mipi_dsi_dcs_write_seq(dsi, 0x0b, 0x2c);
+	mipi_dsi_dcs_write_seq(dsi, 0x11, 0x17);
+	mipi_dsi_dcs_write_seq(dsi, 0x12, 0x13);
+	mipi_dsi_dcs_write_seq(dsi, 0x13, 0x15);
+	mipi_dsi_dcs_write_seq(dsi, 0x15, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0x16, 0x16);
+	mipi_dsi_dcs_write_seq(dsi, 0x17, 0x18);
+	mipi_dsi_dcs_write_seq(dsi, 0x1b, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1d);
+	mipi_dsi_dcs_write_seq(dsi, 0x20, 0x2f);
+	mipi_dsi_dcs_write_seq(dsi, 0x21, 0x2e);
+	mipi_dsi_dcs_write_seq(dsi, 0x22, 0x2d);
+	mipi_dsi_dcs_write_seq(dsi, 0x23, 0x2c);
+	mipi_dsi_dcs_write_seq(dsi, 0x29, 0x17);
+	mipi_dsi_dcs_write_seq(dsi, 0x2a, 0x13);
+	mipi_dsi_dcs_write_seq(dsi, 0x2b, 0x15);
+	mipi_dsi_dcs_write_seq(dsi, 0x2f, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0x30, 0x16);
+	mipi_dsi_dcs_write_seq(dsi, 0x31, 0x18);
+	mipi_dsi_dcs_write_seq(dsi, 0x32, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x34, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0x35, 0x1f);
+	mipi_dsi_dcs_write_seq(dsi, 0x36, 0x1f);
+	mipi_dsi_dcs_write_seq(dsi, 0x4d, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0x4e, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x4f, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x53, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x71, 0x30);
+	mipi_dsi_dcs_write_seq(dsi, 0x79, 0x11);
+	mipi_dsi_dcs_write_seq(dsi, 0x7a, 0x82);
+	mipi_dsi_dcs_write_seq(dsi, 0x7b, 0x8f);
+	mipi_dsi_dcs_write_seq(dsi, 0x7d, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x80, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x81, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x82, 0x13);
+	mipi_dsi_dcs_write_seq(dsi, 0x84, 0x31);
+	mipi_dsi_dcs_write_seq(dsi, 0x85, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x86, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x87, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x90, 0x13);
+	mipi_dsi_dcs_write_seq(dsi, 0x92, 0x31);
+	mipi_dsi_dcs_write_seq(dsi, 0x93, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x94, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x95, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x9c, 0xf4);
+	mipi_dsi_dcs_write_seq(dsi, 0x9d, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xa0, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0xa2, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0xa3, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, 0xa4, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0xa5, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0xc6, 0xc0);
+	mipi_dsi_dcs_write_seq(dsi, 0xc9, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xd9, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, 0xe9, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x25);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x18, 0x22);
+	mipi_dsi_dcs_write_seq(dsi, 0x19, 0xe4);
+	mipi_dsi_dcs_write_seq(dsi, 0x21, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0x66, 0xd8);
+	mipi_dsi_dcs_write_seq(dsi, 0x68, 0x50);
+	mipi_dsi_dcs_write_seq(dsi, 0x69, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0x6b, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x0d);
+	mipi_dsi_dcs_write_seq(dsi, 0x6e, 0x48);
+	mipi_dsi_dcs_write_seq(dsi, 0x72, 0x41);
+	mipi_dsi_dcs_write_seq(dsi, 0x73, 0x4a);
+	mipi_dsi_dcs_write_seq(dsi, 0x74, 0xd0);
+	mipi_dsi_dcs_write_seq(dsi, 0x77, 0x62);
+	mipi_dsi_dcs_write_seq(dsi, 0x79, 0x7e);
+	mipi_dsi_dcs_write_seq(dsi, 0x7d, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, 0x7e, 0x15);
+	mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x84, 0x4d);
+	mipi_dsi_dcs_write_seq(dsi, 0xcf, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, 0xd6, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, 0xd7, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, 0xef, 0x20);
+	mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x84);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x26);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x81, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x83, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x84, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, 0x85, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x86, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, 0x87, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x88, 0x05);
+	mipi_dsi_dcs_write_seq(dsi, 0x8a, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, 0x8b, 0x11);
+	mipi_dsi_dcs_write_seq(dsi, 0x8c, 0x24);
+	mipi_dsi_dcs_write_seq(dsi, 0x8e, 0x42);
+	mipi_dsi_dcs_write_seq(dsi, 0x8f, 0x11);
+	mipi_dsi_dcs_write_seq(dsi, 0x90, 0x11);
+	mipi_dsi_dcs_write_seq(dsi, 0x91, 0x11);
+	mipi_dsi_dcs_write_seq(dsi, 0x9a, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, 0x9b, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x9c, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x9d, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x9e, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x27);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x01, 0x68);
+	mipi_dsi_dcs_write_seq(dsi, 0x20, 0x81);
+	mipi_dsi_dcs_write_seq(dsi, 0x21, 0x6a);
+	mipi_dsi_dcs_write_seq(dsi, 0x25, 0x81);
+	mipi_dsi_dcs_write_seq(dsi, 0x26, 0x94);
+	mipi_dsi_dcs_write_seq(dsi, 0x6e, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x70, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x71, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x72, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x75, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x76, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x77, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0x7d, 0x09);
+	mipi_dsi_dcs_write_seq(dsi, 0x7e, 0x67);
+	mipi_dsi_dcs_write_seq(dsi, 0x80, 0x23);
+	mipi_dsi_dcs_write_seq(dsi, 0x82, 0x09);
+	mipi_dsi_dcs_write_seq(dsi, 0x83, 0x67);
+	mipi_dsi_dcs_write_seq(dsi, 0x88, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x89, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0xa5, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0xa6, 0x23);
+	mipi_dsi_dcs_write_seq(dsi, 0xa7, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0xe5, 0x02);
+	mipi_dsi_dcs_write_seq(dsi, 0xe6, 0xd3);
+	mipi_dsi_dcs_write_seq(dsi, 0xeb, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, 0xec, 0x28);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x2a);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x00, 0x91);
+	mipi_dsi_dcs_write_seq(dsi, 0x03, 0x20);
+	mipi_dsi_dcs_write_seq(dsi, 0x07, 0x50);
+	mipi_dsi_dcs_write_seq(dsi, 0x0a, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, 0x0c, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x0d, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0x0f, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x11, 0xe0);
+	mipi_dsi_dcs_write_seq(dsi, 0x15, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x16, 0xa4);
+	mipi_dsi_dcs_write_seq(dsi, 0x19, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x1a, 0x78);
+	mipi_dsi_dcs_write_seq(dsi, 0x1b, 0x23);
+	mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x1e, 0x3e);
+	mipi_dsi_dcs_write_seq(dsi, 0x1f, 0x3e);
+	mipi_dsi_dcs_write_seq(dsi, 0x20, 0x3e);
+	mipi_dsi_dcs_write_seq(dsi, 0x28, 0xfd);
+	mipi_dsi_dcs_write_seq(dsi, 0x29, 0x12);
+	mipi_dsi_dcs_write_seq(dsi, 0x2a, 0xe1);
+	mipi_dsi_dcs_write_seq(dsi, 0x2d, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, 0x30, 0x49);
+	mipi_dsi_dcs_write_seq(dsi, 0x33, 0x96);
+	mipi_dsi_dcs_write_seq(dsi, 0x34, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, 0x35, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0x36, 0xde);
+	mipi_dsi_dcs_write_seq(dsi, 0x37, 0xf9);
+	mipi_dsi_dcs_write_seq(dsi, 0x38, 0x45);
+	mipi_dsi_dcs_write_seq(dsi, 0x39, 0xd9);
+	mipi_dsi_dcs_write_seq(dsi, 0x3a, 0x49);
+	mipi_dsi_dcs_write_seq(dsi, 0x4a, 0xf0);
+	mipi_dsi_dcs_write_seq(dsi, 0x7a, 0x09);
+	mipi_dsi_dcs_write_seq(dsi, 0x7b, 0x40);
+	mipi_dsi_dcs_write_seq(dsi, 0x7f, 0xf0);
+	mipi_dsi_dcs_write_seq(dsi, 0x83, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x84, 0xa4);
+	mipi_dsi_dcs_write_seq(dsi, 0x87, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x88, 0x78);
+	mipi_dsi_dcs_write_seq(dsi, 0x89, 0x23);
+	mipi_dsi_dcs_write_seq(dsi, 0x8b, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x8c, 0x7d);
+	mipi_dsi_dcs_write_seq(dsi, 0x8d, 0x7d);
+	mipi_dsi_dcs_write_seq(dsi, 0x8e, 0x7d);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x20);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00, 0x00, 0x00, 0x17, 0x00, 0x49, 0x00,
+				0x6a, 0x00, 0x89, 0x00, 0x9f, 0x00, 0xb6, 0x00, 0xc8);
+	mipi_dsi_dcs_write_seq(dsi, 0xb1, 0x00, 0xd9, 0x01, 0x10, 0x01, 0x3a, 0x01,
+				0x7a, 0x01, 0xa9, 0x01, 0xf2, 0x02, 0x2d, 0x02, 0x2e);
+	mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x02, 0x64, 0x02, 0xa3, 0x02, 0xca, 0x03,
+				0x00, 0x03, 0x1e, 0x03, 0x4a, 0x03, 0x59, 0x03, 0x6a);
+	mipi_dsi_dcs_write_seq(dsi, 0xb3, 0x03, 0x7d, 0x03, 0x93, 0x03, 0xab, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xb4, 0x00, 0x00, 0x00, 0x1b, 0x00, 0x51, 0x00,
+				0x71, 0x00, 0x90, 0x00, 0xa7, 0x00, 0xbf, 0x00, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0xb5, 0x00, 0xe2, 0x01, 0x1a, 0x01, 0x43, 0x01,
+				0x83, 0x01, 0xb2, 0x01, 0xfa, 0x02, 0x34, 0x02, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x02, 0x6b, 0x02, 0xa8, 0x02, 0xd0, 0x03,
+				0x03, 0x03, 0x21, 0x03, 0x4d, 0x03, 0x5b, 0x03, 0x6b);
+	mipi_dsi_dcs_write_seq(dsi, 0xb7, 0x03, 0x7e, 0x03, 0x94, 0x03, 0xac, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xb8, 0x00, 0x00, 0x00, 0x1b, 0x00, 0x51, 0x00,
+				0x72, 0x00, 0x92, 0x00, 0xa8, 0x00, 0xbf, 0x00, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xe2, 0x01, 0x18, 0x01, 0x42, 0x01,
+				0x81, 0x01, 0xaf, 0x01, 0xf5, 0x02, 0x2f, 0x02, 0x31);
+	mipi_dsi_dcs_write_seq(dsi, 0xba, 0x02, 0x68, 0x02, 0xa6, 0x02, 0xcd, 0x03,
+				0x01, 0x03, 0x1f, 0x03, 0x4a, 0x03, 0x59, 0x03, 0x6a);
+	mipi_dsi_dcs_write_seq(dsi, 0xbb, 0x03, 0x7d, 0x03, 0x93, 0x03, 0xab, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x21);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00, 0x00, 0x00, 0x17, 0x00, 0x49, 0x00,
+				0x6a, 0x00, 0x89, 0x00, 0x9f, 0x00, 0xb6, 0x00, 0xc8);
+	mipi_dsi_dcs_write_seq(dsi, 0xb1, 0x00, 0xd9, 0x01, 0x10, 0x01, 0x3a, 0x01,
+				0x7a, 0x01, 0xa9, 0x01, 0xf2, 0x02, 0x2d, 0x02, 0x2e);
+	mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x02, 0x64, 0x02, 0xa3, 0x02, 0xca, 0x03,
+				0x00, 0x03, 0x1e, 0x03, 0x4a, 0x03, 0x59, 0x03, 0x6a);
+	mipi_dsi_dcs_write_seq(dsi, 0xb3, 0x03, 0x7d, 0x03, 0x93, 0x03, 0xab, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xb4, 0x00, 0x00, 0x00, 0x1b, 0x00, 0x51, 0x00,
+				0x71, 0x00, 0x90, 0x00, 0xa7, 0x00, 0xbf, 0x00, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0xb5, 0x00, 0xe2, 0x01, 0x1a, 0x01, 0x43, 0x01,
+				0x83, 0x01, 0xb2, 0x01, 0xfa, 0x02, 0x34, 0x02, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x02, 0x6b, 0x02, 0xa8, 0x02, 0xd0, 0x03,
+				0x03, 0x03, 0x21, 0x03, 0x4d, 0x03, 0x5b, 0x03, 0x6b);
+	mipi_dsi_dcs_write_seq(dsi, 0xb7, 0x03, 0x7e, 0x03, 0x94, 0x03, 0xac, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xb8, 0x00, 0x00, 0x00, 0x1b, 0x00, 0x51, 0x00,
+				0x72, 0x00, 0x92, 0x00, 0xa8, 0x00, 0xbf, 0x00, 0xd1);
+	mipi_dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xe2, 0x01, 0x18, 0x01, 0x42, 0x01,
+				0x81, 0x01, 0xaf, 0x01, 0xf5, 0x02, 0x2f, 0x02, 0x31);
+	mipi_dsi_dcs_write_seq(dsi, 0xba, 0x02, 0x68, 0x02, 0xa6, 0x02, 0xcd, 0x03,
+				0x01, 0x03, 0x1f, 0x03, 0x4a, 0x03, 0x59, 0x03, 0x6a);
+	mipi_dsi_dcs_write_seq(dsi, 0xbb, 0x03, 0x7d, 0x03, 0x93, 0x03, 0xab, 0x03,
+				0xc8, 0x03, 0xec, 0x03, 0xfe, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x2c);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x61, 0x1f);
+	mipi_dsi_dcs_write_seq(dsi, 0x62, 0x1f);
+	mipi_dsi_dcs_write_seq(dsi, 0x7e, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, 0x6a, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0x6b, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x36);
+	mipi_dsi_dcs_write_seq(dsi, 0x53, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x54, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x55, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0x56, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x58, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0x59, 0x0f);
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0xf0);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x5a, 0x00);
+
+	mipi_dsi_dcs_write_seq(dsi, 0xff, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, 0xfb, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0x51, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, 0x53, 0x24);
+	mipi_dsi_dcs_write_seq(dsi, 0x55, 0x01);
+
+	return 0;
+}
+
+static int nt36672e_power_on(struct nt36672e_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+				regulator_enable_loads[i]);
+		if (ret) {
+			dev_err(&dsi->dev, "regulator set load failed for supply %s: %d\n",
+				ctx->supplies[i].supply, ret);
+			return ret;
+		}
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "regulator bulk enable failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Reset sequence of nt36672e panel requires the panel to be out of reset
+	 * for 10ms, followed by being held in reset for 10ms and then out again.
+	 */
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static int nt36672e_power_off(struct nt36672e_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	int ret = 0;
+	int i;
+
+	gpiod_set_value(ctx->reset_gpio, 0);
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+		ret = regulator_set_load(ctx->supplies[i].consumer,
+				regulator_disable_loads[i]);
+		if (ret) {
+			dev_err(&dsi->dev, "regulator set load failed for supply %s: %d\n",
+				ctx->supplies[i].supply, ret);
+			return ret;
+		}
+	}
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		dev_err(&dsi->dev, "regulator bulk disable failed: %d\n", ret);
+
+	return ret;
+}
+
+static int nt36672e_on(struct nt36672e_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	const struct panel_desc *desc = ctx->desc;
+	int ret = 0;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	if (desc->init_sequence) {
+		ret = desc->init_sequence(dsi);
+		if (ret < 0) {
+			dev_err(&dsi->dev, "panel init sequence failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(100);
+
+	return 0;
+}
+
+static int nt36672e_off(struct nt36672e_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	int ret = 0;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(60);
+
+	return 0;
+}
+
+static int nt36672e_panel_prepare(struct drm_panel *panel)
+{
+	struct nt36672e_panel *ctx = to_nt36672e_panel(panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	int ret = 0;
+
+	ret = nt36672e_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = nt36672e_on(ctx);
+	if (ret < 0) {
+		dev_err(&dsi->dev, "Failed to initialize panel: %d\n", ret);
+		if (nt36672e_power_off(ctx))
+			dev_err(&dsi->dev, "power off failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nt36672e_panel_unprepare(struct drm_panel *panel)
+{
+	struct nt36672e_panel *ctx = to_nt36672e_panel(panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	int ret = 0;
+
+	ret = nt36672e_off(ctx);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to un-initialize panel: %d\n", ret);
+
+	ret = nt36672e_power_off(ctx);
+	if (ret < 0)
+		dev_err(&dsi->dev, "power off failed: %d\n", ret);
+
+	return 0;
+}
+
+static const struct drm_display_mode nt36672e_1080x2408_60hz = {
+	.name = "1080x2408",
+	.clock = 181690,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 76,
+	.hsync_end = 1080 + 76 + 12,
+	.htotal = 1080 + 76 + 12 + 56,
+	.vdisplay = 2408,
+	.vsync_start = 2408 + 46,
+	.vsync_end = 2408 + 46 + 10,
+	.vtotal = 2408 + 46 + 10 + 10,
+	.flags = 0,
+};
+
+static const struct panel_desc nt36672e_panel_desc = {
+	.display_mode = &nt36672e_1080x2408_60hz,
+	.width_mm = 74,
+	.height_mm = 131,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS,
+	.format = MIPI_DSI_FMT_RGB888,
+	.lanes = 4,
+	.panel_name = "nt36672e fhd plus panel",
+	.init_sequence = nt36672e_1080x2408_60hz_init,
+};
+
+static int nt36672e_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+	struct nt36672e_panel *ctx = to_nt36672e_panel(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, ctx->desc->display_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = ctx->desc->width_mm;
+	connector->display_info.height_mm = ctx->desc->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs nt36672e_drm_funcs = {
+	.prepare = nt36672e_panel_prepare,
+	.unprepare = nt36672e_panel_unprepare,
+	.get_modes = nt36672e_panel_get_modes,
+};
+
+static int nt36672e_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct nt36672e_panel *ctx;
+	int i, ret = 0;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->desc = of_device_get_match_data(dev);
+	if (!ctx->desc) {
+		dev_err(dev, "missing device configuration\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+		ctx->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+			ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = ctx->desc->lanes;
+	dsi->format = ctx->desc->format;
+	dsi->mode_flags = ctx->desc->mode_flags;
+
+	drm_panel_init(&ctx->panel, dev, &nt36672e_drm_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	ctx->panel.prepare_prev_first = true;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	drm_panel_remove(&ctx->panel);
+	return ret;
+}
+
+static void nt36672e_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct nt36672e_panel *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(ctx->dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id nt36672e_of_match[] = {
+	{
+		.compatible = "novatek,nt36672e",
+		.data = &nt36672e_panel_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, nt36672e_of_match);
+
+static struct mipi_dsi_driver nt36672e_panel_driver = {
+	.driver = {
+		.name = "panel-novatek-nt36672e",
+		.of_match_table = nt36672e_of_match,
+	},
+	.probe = nt36672e_panel_probe,
+	.remove = nt36672e_panel_remove,
+};
+module_mipi_dsi_driver(nt36672e_panel_driver);
+
+MODULE_AUTHOR("Ritesh Kumar <quic_riteshk@quicinc.com>");
+MODULE_DESCRIPTION("Novatek NT36672E DSI Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 228c5c48e1..e8fe5a6945 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1997,6 +1997,33 @@ static const struct panel_desc edt_etml0700y5dha = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct display_timing edt_etml1010g3dra_timing = {
+	.pixelclock = { 66300000, 72400000, 78900000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 12, 72, 132 },
+	.hback_porch = { 86, 86, 86 },
+	.hsync_len = { 2, 2, 2 },
+	.vactive = { 800, 800, 800 },
+	.vfront_porch = { 1, 15, 49 },
+	.vback_porch = { 21, 21, 21 },
+	.vsync_len = { 2, 2, 2 },
+	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW |
+		 DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc edt_etml1010g3dra = {
+	.timings = &edt_etml1010g3dra_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 216,
+		.height = 135,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode edt_etmv570g2dhu_mode = {
 	.clock = 25175,
 	.hdisplay = 640,
@@ -2774,21 +2801,21 @@ static const struct panel_desc lemaker_bl035_rgb_002 = {
 	.bus_flags = DRM_BUS_FLAG_DE_LOW,
 };
 
-static const struct drm_display_mode lg_lb070wv8_mode = {
-	.clock = 33246,
-	.hdisplay = 800,
-	.hsync_start = 800 + 88,
-	.hsync_end = 800 + 88 + 80,
-	.htotal = 800 + 88 + 80 + 88,
-	.vdisplay = 480,
-	.vsync_start = 480 + 10,
-	.vsync_end = 480 + 10 + 25,
-	.vtotal = 480 + 10 + 25 + 10,
+static const struct display_timing lg_lb070wv8_timing = {
+	.pixelclock = { 31950000, 33260000, 34600000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 88, 88, 88 },
+	.hback_porch = { 88, 88, 88 },
+	.hsync_len = { 80, 80, 80 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 10, 10, 10 },
+	.vback_porch = { 10, 10, 10 },
+	.vsync_len = { 25, 25, 25 },
 };
 
 static const struct panel_desc lg_lb070wv8 = {
-	.modes = &lg_lb070wv8_mode,
-	.num_modes = 1,
+	.timings = &lg_lb070wv8_timing,
+	.num_timings = 1,
 	.bpc = 8,
 	.size = {
 		.width = 151,
@@ -3536,14 +3563,15 @@ static const struct display_timing rocktech_rk043fn48h_timing = {
 	.pixelclock = { 6000000, 9000000, 12000000 },
 	.hactive = { 480, 480, 480 },
 	.hback_porch = { 8, 43, 43 },
-	.hfront_porch = { 2, 8, 8 },
+	.hfront_porch = { 2, 8, 10 },
 	.hsync_len = { 1, 1, 1 },
 	.vactive = { 272, 272, 272 },
-	.vback_porch = { 2, 12, 12 },
+	.vback_porch = { 2, 12, 26 },
 	.vfront_porch = { 1, 4, 4 },
 	.vsync_len = { 1, 10, 10 },
 	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW |
-		 DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+		 DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+		 DISPLAY_FLAGS_SYNC_POSEDGE,
 };
 
 static const struct panel_desc rocktech_rk043fn48h = {
@@ -4447,6 +4475,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "edt,etml0700y5dha",
 		.data = &edt_etml0700y5dha,
 	}, {
+		.compatible = "edt,etml1010g3dra",
+		.data = &edt_etml1010g3dra,
+	}, {
 		.compatible = "edt,etmv570g2dhu",
 		.data = &edt_etmv570g2dhu,
 	}, {
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index b55bafd1a8..a3e142f156 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -62,6 +62,7 @@ struct st7703 {
 
 	struct dentry *debugfs;
 	const struct st7703_panel_desc *desc;
+	enum drm_panel_orientation orientation;
 };
 
 struct st7703_panel_desc {
@@ -521,6 +522,96 @@ static const struct st7703_panel_desc rgb30panel_desc = {
 	.init_sequence = rgb30panel_init_sequence,
 };
 
+static int rgb10max3_panel_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/* Init sequence extracted from Powkiddy RGB10MAX3 BSP kernel. */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00, 0xda,
+			       0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0xc8, 0x02, 0x30);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x04, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x78, 0x78);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, 0xf0,
+			       0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, 0xf9,
+			       0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, 0x00,
+			       0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x70, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x25, 0x00, 0x32,
+			       0x32, 0x77, 0xe1, 0xff, 0xff, 0xcc, 0xcc, 0x77,
+			       0x77);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x04, 0x07,
+			       0x2a, 0x39, 0x3f, 0x36, 0x31, 0x06, 0x0b, 0x0e,
+			       0x12, 0x14, 0x12, 0x13, 0x0f, 0x17, 0x00, 0x04,
+			       0x07, 0x2a, 0x39, 0x3f, 0x36, 0x31, 0x06, 0x0b,
+			       0x0e, 0x12, 0x14, 0x12, 0x13, 0x0f, 0x17);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x03, 0x03, 0x03, 0x03,
+			       0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0xff, 0x80,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x08, 0x00,
+			       0x00, 0x41, 0xf8, 0x12, 0x31, 0x23, 0x37, 0x86,
+			       0x11, 0xc8, 0x37, 0x2a, 0x00, 0x00, 0x0c, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
+			       0x88, 0x20, 0x46, 0x02, 0x88, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0xff, 0x88, 0x31, 0x57, 0x13, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xff, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x00, 0x1a, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x8f, 0x13, 0x31, 0x75, 0x88, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0xf8, 0x8f, 0x02, 0x20, 0x64, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xf8, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rgb10max3_panel_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 40,
+	.hsync_end	= 720 + 40 + 10,
+	.htotal		= 720 + 40 + 10 + 40,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 16,
+	.vsync_end	= 1280 + 16 + 4,
+	.vtotal		= 1280 + 16 + 4 + 14,
+	.clock		= 63800,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 62,
+	.height_mm	= 109,
+};
+
+static const struct st7703_panel_desc rgb10max3_panel_desc = {
+	.mode = &rgb10max3_panel_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rgb10max3_panel_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
@@ -653,12 +744,20 @@ static int st7703_get_modes(struct drm_panel *panel,
 	return 1;
 }
 
+static enum drm_panel_orientation st7703_get_orientation(struct drm_panel *panel)
+{
+	struct st7703 *st7703 = panel_to_st7703(panel);
+
+	return st7703->orientation;
+}
+
 static const struct drm_panel_funcs st7703_drm_funcs = {
 	.disable   = st7703_disable,
 	.unprepare = st7703_unprepare,
 	.prepare   = st7703_prepare,
 	.enable	   = st7703_enable,
 	.get_modes = st7703_get_modes,
+	.get_orientation = st7703_get_orientation,
 };
 
 static int allpixelson_set(void *data, u64 val)
@@ -727,6 +826,10 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
 				     "Failed to request iovcc regulator\n");
 
+	ret = of_drm_get_panel_orientation(dsi->dev.of_node, &ctx->orientation);
+	if (ret < 0)
+		return dev_err_probe(&dsi->dev, ret, "Failed to get orientation\n");
+
 	drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
 
@@ -784,6 +887,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
 
 static const struct of_device_id st7703_of_match[] = {
 	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
+	{ .compatible = "powkiddy,rgb10max3-panel", .data = &rgb10max3_panel_desc },
 	{ .compatible = "powkiddy,rgb30-panel", .data = &rgb30panel_desc },
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 88e80fe981..28bfc48a91 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -282,15 +282,15 @@ static const struct drm_display_mode et028013dma_mode = {
 static const struct drm_display_mode jt240mhqs_hwt_ek_e3_mode = {
 	.clock = 6000,
 	.hdisplay = 240,
-	.hsync_start = 240 + 28,
-	.hsync_end = 240 + 28 + 10,
-	.htotal = 240 + 28 + 10 + 10,
+	.hsync_start = 240 + 38,
+	.hsync_end = 240 + 38 + 10,
+	.htotal = 240 + 38 + 10 + 10,
 	.vdisplay = 280,
-	.vsync_start = 280 + 8,
-	.vsync_end = 280 + 8 + 4,
-	.vtotal = 280 + 8 + 4 + 4,
-	.width_mm = 43,
-	.height_mm = 37,
+	.vsync_start = 280 + 48,
+	.vsync_end = 280 + 48 + 4,
+	.vtotal = 280 + 48 + 4 + 4,
+	.width_mm = 37,
+	.height_mm = 43,
 	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
 };
 
@@ -643,7 +643,9 @@ static int st7789v_probe(struct spi_device *spi)
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to get backlight\n");
 
-	of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
+	ret = of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
+	if (ret)
+		return dev_err_probe(&spi->dev, ret, "Failed to get orientation\n");
 
 	drm_panel_add(&ctx->panel);
 
diff --git a/drivers/gpu/drm/panel/panel-visionox-r66451.c b/drivers/gpu/drm/panel/panel-visionox-r66451.c
index fbb73464de..493f2a6076 100644
--- a/drivers/gpu/drm/panel/panel-visionox-r66451.c
+++ b/drivers/gpu/drm/panel/panel-visionox-r66451.c
@@ -322,6 +322,7 @@ static int visionox_r66451_probe(struct mipi_dsi_device *dsi)
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	ctx->panel.prepare_prev_first = true;
 
 	drm_panel_init(&ctx->panel, dev, &visionox_r66451_funcs, DRM_MODE_CONNECTOR_DSI);
 	ctx->panel.backlight = visionox_r66451_create_backlight(dsi);
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index a23407b9f6..540099253e 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -287,6 +287,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
 			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	ctx->panel.prepare_prev_first = true;
 
 	drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,
 		       DRM_MODE_CONNECTOR_DSI);