Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1171 insertions, 0 deletions

diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c
new file mode 100644
index 0000000000..b77ebac2e0
--- /dev/null
+++ b/drivers/hwmon/bt1-pvt.c
@@ -0,0 +1,1171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Authors:
+ *   Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
+ *   Serge Semin <Sergey.Semin@baikalelectronics.ru>
+ *
+ * Baikal-T1 Process, Voltage, Temperature sensor driver
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/polynomial.h>
+#include <linux/seqlock.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#include "bt1-pvt.h"
+
+/*
+ * For the sake of the code simplification we created the sensors info table
+ * with the sensor names, activation modes, threshold registers base address
+ * and the thresholds bit fields.
+ */
+static const struct pvt_sensor_info pvt_info[] = {
+	PVT_SENSOR_INFO(0, "CPU Core Temperature", hwmon_temp, TEMP, TTHRES),
+	PVT_SENSOR_INFO(0, "CPU Core Voltage", hwmon_in, VOLT, VTHRES),
+	PVT_SENSOR_INFO(1, "CPU Core Low-Vt", hwmon_in, LVT, LTHRES),
+	PVT_SENSOR_INFO(2, "CPU Core High-Vt", hwmon_in, HVT, HTHRES),
+	PVT_SENSOR_INFO(3, "CPU Core Standard-Vt", hwmon_in, SVT, STHRES),
+};
+
+/*
+ * The original translation formulae of the temperature (in degrees of Celsius)
+ * to PVT data and vice-versa are following:
+ * N = 1.8322e-8*(T^4) + 2.343e-5*(T^3) + 8.7018e-3*(T^2) + 3.9269*(T^1) +
+ *     1.7204e2,
+ * T = -1.6743e-11*(N^4) + 8.1542e-8*(N^3) + -1.8201e-4*(N^2) +
+ *     3.1020e-1*(N^1) - 4.838e1,
+ * where T = [-48.380, 147.438]C and N = [0, 1023].
+ * They must be accordingly altered to be suitable for the integer arithmetics.
+ * The technique is called 'factor redistribution', which just makes sure the
+ * multiplications and divisions are made so to have a result of the operations
+ * within the integer numbers limit. In addition we need to translate the
+ * formulae to accept millidegrees of Celsius. Here what they look like after
+ * the alterations:
+ * N = (18322e-20*(T^4) + 2343e-13*(T^3) + 87018e-9*(T^2) + 39269e-3*T +
+ *     17204e2) / 1e4,
+ * T = -16743e-12*(D^4) + 81542e-9*(D^3) - 182010e-6*(D^2) + 310200e-3*D -
+ *     48380,
+ * where T = [-48380, 147438] mC and N = [0, 1023].
+ */
+static const struct polynomial __maybe_unused poly_temp_to_N = {
+	.total_divider = 10000,
+	.terms = {
+		{4, 18322, 10000, 10000},
+		{3, 2343, 10000, 10},
+		{2, 87018, 10000, 10},
+		{1, 39269, 1000, 1},
+		{0, 1720400, 1, 1}
+	}
+};
+
+static const struct polynomial poly_N_to_temp = {
+	.total_divider = 1,
+	.terms = {
+		{4, -16743, 1000, 1},
+		{3, 81542, 1000, 1},
+		{2, -182010, 1000, 1},
+		{1, 310200, 1000, 1},
+		{0, -48380, 1, 1}
+	}
+};
+
+/*
+ * Similar alterations are performed for the voltage conversion equations.
+ * The original formulae are:
+ * N = 1.8658e3*V - 1.1572e3,
+ * V = (N + 1.1572e3) / 1.8658e3,
+ * where V = [0.620, 1.168] V and N = [0, 1023].
+ * After the optimization they looks as follows:
+ * N = (18658e-3*V - 11572) / 10,
+ * V = N * 10^5 / 18658 + 11572 * 10^4 / 18658.
+ */
+static const struct polynomial __maybe_unused poly_volt_to_N = {
+	.total_divider = 10,
+	.terms = {
+		{1, 18658, 1000, 1},
+		{0, -11572, 1, 1}
+	}
+};
+
+static const struct polynomial poly_N_to_volt = {
+	.total_divider = 10,
+	.terms = {
+		{1, 100000, 18658, 1},
+		{0, 115720000, 1, 18658}
+	}
+};
+
+static inline u32 pvt_update(void __iomem *reg, u32 mask, u32 data)
+{
+	u32 old;
+
+	old = readl_relaxed(reg);
+	writel((old & ~mask) | (data & mask), reg);
+
+	return old & mask;
+}
+
+/*
+ * Baikal-T1 PVT mode can be updated only when the controller is disabled.
+ * So first we disable it, then set the new mode together with the controller
+ * getting back enabled. The same concerns the temperature trim and
+ * measurements timeout. If it is necessary the interface mutex is supposed
+ * to be locked at the time the operations are performed.
+ */
+static inline void pvt_set_mode(struct pvt_hwmon *pvt, u32 mode)
+{
+	u32 old;
+
+	mode = FIELD_PREP(PVT_CTRL_MODE_MASK, mode);
+
+	old = pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_MODE_MASK | PVT_CTRL_EN,
+		   mode | old);
+}
+
+static inline u32 pvt_calc_trim(long temp)
+{
+	temp = clamp_val(temp, 0, PVT_TRIM_TEMP);
+
+	return DIV_ROUND_UP(temp, PVT_TRIM_STEP);
+}
+
+static inline void pvt_set_trim(struct pvt_hwmon *pvt, u32 trim)
+{
+	u32 old;
+
+	trim = FIELD_PREP(PVT_CTRL_TRIM_MASK, trim);
+
+	old = pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_TRIM_MASK | PVT_CTRL_EN,
+		   trim | old);
+}
+
+static inline void pvt_set_tout(struct pvt_hwmon *pvt, u32 tout)
+{
+	u32 old;
+
+	old = pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	writel(tout, pvt->regs + PVT_TTIMEOUT);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, old);
+}
+
+/*
+ * This driver can optionally provide the hwmon alarms for each sensor the PVT
+ * controller supports. The alarms functionality is made compile-time
+ * configurable due to the hardware interface implementation peculiarity
+ * described further in this comment. So in case if alarms are unnecessary in
+ * your system design it's recommended to have them disabled to prevent the PVT
+ * IRQs being periodically raised to get the data cache/alarms status up to
+ * date.
+ *
+ * Baikal-T1 PVT embedded controller is based on the Analog Bits PVT sensor,
+ * but is equipped with a dedicated control wrapper. It exposes the PVT
+ * sub-block registers space via the APB3 bus. In addition the wrapper provides
+ * a common interrupt vector of the sensors conversion completion events and
+ * threshold value alarms. Alas the wrapper interface hasn't been fully thought
+ * through. There is only one sensor can be activated at a time, for which the
+ * thresholds comparator is enabled right after the data conversion is
+ * completed. Due to this if alarms need to be implemented for all available
+ * sensors we can't just set the thresholds and enable the interrupts. We need
+ * to enable the sensors one after another and let the controller to detect
+ * the alarms by itself at each conversion. This also makes pointless to handle
+ * the alarms interrupts, since in occasion they happen synchronously with
+ * data conversion completion. The best driver design would be to have the
+ * completion interrupts enabled only and keep the converted value in the
+ * driver data cache. This solution is implemented if hwmon alarms are enabled
+ * in this driver. In case if the alarms are disabled, the conversion is
+ * performed on demand at the time a sensors input file is read.
+ */
+
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+
+#define pvt_hard_isr NULL
+
+static irqreturn_t pvt_soft_isr(int irq, void *data)
+{
+	const struct pvt_sensor_info *info;
+	struct pvt_hwmon *pvt = data;
+	struct pvt_cache *cache;
+	u32 val, thres_sts, old;
+
+	/*
+	 * DVALID bit will be cleared by reading the data. We need to save the
+	 * status before the next conversion happens. Threshold events will be
+	 * handled a bit later.
+	 */
+	thres_sts = readl(pvt->regs + PVT_RAW_INTR_STAT);
+
+	/*
+	 * Then lets recharge the PVT interface with the next sampling mode.
+	 * Lock the interface mutex to serialize trim, timeouts and alarm
+	 * thresholds settings.
+	 */
+	cache = &pvt->cache[pvt->sensor];
+	info = &pvt_info[pvt->sensor];
+	pvt->sensor = (pvt->sensor == PVT_SENSOR_LAST) ?
+		      PVT_SENSOR_FIRST : (pvt->sensor + 1);
+
+	/*
+	 * For some reason we have to mask the interrupt before changing the
+	 * mode, otherwise sometimes the temperature mode doesn't get
+	 * activated even though the actual mode in the ctrl register
+	 * corresponds to one. Then we read the data. By doing so we also
+	 * recharge the data conversion. After this the mode corresponding
+	 * to the next sensor in the row is set. Finally we enable the
+	 * interrupts back.
+	 */
+	mutex_lock(&pvt->iface_mtx);
+
+	old = pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID,
+			 PVT_INTR_DVALID);
+
+	val = readl(pvt->regs + PVT_DATA);
+
+	pvt_set_mode(pvt, pvt_info[pvt->sensor].mode);
+
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID, old);
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	/*
+	 * We can now update the data cache with data just retrieved from the
+	 * sensor. Lock write-seqlock to make sure the reader has a coherent
+	 * data.
+	 */
+	write_seqlock(&cache->data_seqlock);
+
+	cache->data = FIELD_GET(PVT_DATA_DATA_MASK, val);
+
+	write_sequnlock(&cache->data_seqlock);
+
+	/*
+	 * While PVT core is doing the next mode data conversion, we'll check
+	 * whether the alarms were triggered for the current sensor. Note that
+	 * according to the documentation only one threshold IRQ status can be
+	 * set at a time, that's why if-else statement is utilized.
+	 */
+	if ((thres_sts & info->thres_sts_lo) ^ cache->thres_sts_lo) {
+		WRITE_ONCE(cache->thres_sts_lo, thres_sts & info->thres_sts_lo);
+		hwmon_notify_event(pvt->hwmon, info->type, info->attr_min_alarm,
+				   info->channel);
+	} else if ((thres_sts & info->thres_sts_hi) ^ cache->thres_sts_hi) {
+		WRITE_ONCE(cache->thres_sts_hi, thres_sts & info->thres_sts_hi);
+		hwmon_notify_event(pvt->hwmon, info->type, info->attr_max_alarm,
+				   info->channel);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static inline umode_t pvt_limit_is_visible(enum pvt_sensor_type type)
+{
+	return 0644;
+}
+
+static inline umode_t pvt_alarm_is_visible(enum pvt_sensor_type type)
+{
+	return 0444;
+}
+
+static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			 long *val)
+{
+	struct pvt_cache *cache = &pvt->cache[type];
+	unsigned int seq;
+	u32 data;
+
+	do {
+		seq = read_seqbegin(&cache->data_seqlock);
+		data = cache->data;
+	} while (read_seqretry(&cache->data_seqlock, seq));
+
+	if (type == PVT_TEMP)
+		*val = polynomial_calc(&poly_N_to_temp, data);
+	else
+		*val = polynomial_calc(&poly_N_to_volt, data);
+
+	return 0;
+}
+
+static int pvt_read_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			  bool is_low, long *val)
+{
+	u32 data;
+
+	/* No need in serialization, since it is just read from MMIO. */
+	data = readl(pvt->regs + pvt_info[type].thres_base);
+
+	if (is_low)
+		data = FIELD_GET(PVT_THRES_LO_MASK, data);
+	else
+		data = FIELD_GET(PVT_THRES_HI_MASK, data);
+
+	if (type == PVT_TEMP)
+		*val = polynomial_calc(&poly_N_to_temp, data);
+	else
+		*val = polynomial_calc(&poly_N_to_volt, data);
+
+	return 0;
+}
+
+static int pvt_write_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			   bool is_low, long val)
+{
+	u32 data, limit, mask;
+	int ret;
+
+	if (type == PVT_TEMP) {
+		val = clamp(val, PVT_TEMP_MIN, PVT_TEMP_MAX);
+		data = polynomial_calc(&poly_temp_to_N, val);
+	} else {
+		val = clamp(val, PVT_VOLT_MIN, PVT_VOLT_MAX);
+		data = polynomial_calc(&poly_volt_to_N, val);
+	}
+
+	/* Serialize limit update, since a part of the register is changed. */
+	ret = mutex_lock_interruptible(&pvt->iface_mtx);
+	if (ret)
+		return ret;
+
+	/* Make sure the upper and lower ranges don't intersect. */
+	limit = readl(pvt->regs + pvt_info[type].thres_base);
+	if (is_low) {
+		limit = FIELD_GET(PVT_THRES_HI_MASK, limit);
+		data = clamp_val(data, PVT_DATA_MIN, limit);
+		data = FIELD_PREP(PVT_THRES_LO_MASK, data);
+		mask = PVT_THRES_LO_MASK;
+	} else {
+		limit = FIELD_GET(PVT_THRES_LO_MASK, limit);
+		data = clamp_val(data, limit, PVT_DATA_MAX);
+		data = FIELD_PREP(PVT_THRES_HI_MASK, data);
+		mask = PVT_THRES_HI_MASK;
+	}
+
+	pvt_update(pvt->regs + pvt_info[type].thres_base, mask, data);
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	return 0;
+}
+
+static int pvt_read_alarm(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			  bool is_low, long *val)
+{
+	if (is_low)
+		*val = !!READ_ONCE(pvt->cache[type].thres_sts_lo);
+	else
+		*val = !!READ_ONCE(pvt->cache[type].thres_sts_hi);
+
+	return 0;
+}
+
+static const struct hwmon_channel_info * const pvt_channel_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_TYPE | HWMON_T_LABEL |
+			   HWMON_T_MIN | HWMON_T_MIN_ALARM |
+			   HWMON_T_MAX | HWMON_T_MAX_ALARM |
+			   HWMON_T_OFFSET),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL |
+			   HWMON_I_MIN | HWMON_I_MIN_ALARM |
+			   HWMON_I_MAX | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LABEL |
+			   HWMON_I_MIN | HWMON_I_MIN_ALARM |
+			   HWMON_I_MAX | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LABEL |
+			   HWMON_I_MIN | HWMON_I_MIN_ALARM |
+			   HWMON_I_MAX | HWMON_I_MAX_ALARM,
+			   HWMON_I_INPUT | HWMON_I_LABEL |
+			   HWMON_I_MIN | HWMON_I_MIN_ALARM |
+			   HWMON_I_MAX | HWMON_I_MAX_ALARM),
+	NULL
+};
+
+#else /* !CONFIG_SENSORS_BT1_PVT_ALARMS */
+
+static irqreturn_t pvt_hard_isr(int irq, void *data)
+{
+	struct pvt_hwmon *pvt = data;
+	struct pvt_cache *cache;
+	u32 val;
+
+	/*
+	 * Mask the DVALID interrupt so after exiting from the handler a
+	 * repeated conversion wouldn't happen.
+	 */
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID,
+		   PVT_INTR_DVALID);
+
+	/*
+	 * Nothing special for alarm-less driver. Just read the data, update
+	 * the cache and notify a waiter of this event.
+	 */
+	val = readl(pvt->regs + PVT_DATA);
+	if (!(val & PVT_DATA_VALID)) {
+		dev_err(pvt->dev, "Got IRQ when data isn't valid\n");
+		return IRQ_HANDLED;
+	}
+
+	cache = &pvt->cache[pvt->sensor];
+
+	WRITE_ONCE(cache->data, FIELD_GET(PVT_DATA_DATA_MASK, val));
+
+	complete(&cache->conversion);
+
+	return IRQ_HANDLED;
+}
+
+#define pvt_soft_isr NULL
+
+static inline umode_t pvt_limit_is_visible(enum pvt_sensor_type type)
+{
+	return 0;
+}
+
+static inline umode_t pvt_alarm_is_visible(enum pvt_sensor_type type)
+{
+	return 0;
+}
+
+static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			 long *val)
+{
+	struct pvt_cache *cache = &pvt->cache[type];
+	unsigned long timeout;
+	u32 data;
+	int ret;
+
+	/*
+	 * Lock PVT conversion interface until data cache is updated. The
+	 * data read procedure is following: set the requested PVT sensor
+	 * mode, enable IRQ and conversion, wait until conversion is finished,
+	 * then disable conversion and IRQ, and read the cached data.
+	 */
+	ret = mutex_lock_interruptible(&pvt->iface_mtx);
+	if (ret)
+		return ret;
+
+	pvt->sensor = type;
+	pvt_set_mode(pvt, pvt_info[type].mode);
+
+	/*
+	 * Unmask the DVALID interrupt and enable the sensors conversions.
+	 * Do the reverse procedure when conversion is done.
+	 */
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID, 0);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, PVT_CTRL_EN);
+
+	/*
+	 * Wait with timeout since in case if the sensor is suddenly powered
+	 * down the request won't be completed and the caller will hang up on
+	 * this procedure until the power is back up again. Multiply the
+	 * timeout by the factor of two to prevent a false timeout.
+	 */
+	timeout = 2 * usecs_to_jiffies(ktime_to_us(pvt->timeout));
+	ret = wait_for_completion_timeout(&cache->conversion, timeout);
+
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID,
+		   PVT_INTR_DVALID);
+
+	data = READ_ONCE(cache->data);
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	if (!ret)
+		return -ETIMEDOUT;
+
+	if (type == PVT_TEMP)
+		*val = polynomial_calc(&poly_N_to_temp, data);
+	else
+		*val = polynomial_calc(&poly_N_to_volt, data);
+
+	return 0;
+}
+
+static int pvt_read_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			  bool is_low, long *val)
+{
+	return -EOPNOTSUPP;
+}
+
+static int pvt_write_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			   bool is_low, long val)
+{
+	return -EOPNOTSUPP;
+}
+
+static int pvt_read_alarm(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
+			  bool is_low, long *val)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct hwmon_channel_info * const pvt_channel_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_TYPE | HWMON_T_LABEL |
+			   HWMON_T_OFFSET),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL),
+	NULL
+};
+
+#endif /* !CONFIG_SENSORS_BT1_PVT_ALARMS */
+
+static inline bool pvt_hwmon_channel_is_valid(enum hwmon_sensor_types type,
+					      int ch)
+{
+	switch (type) {
+	case hwmon_temp:
+		if (ch < 0 || ch >= PVT_TEMP_CHS)
+			return false;
+		break;
+	case hwmon_in:
+		if (ch < 0 || ch >= PVT_VOLT_CHS)
+			return false;
+		break;
+	default:
+		break;
+	}
+
+	/* The rest of the types are independent from the channel number. */
+	return true;
+}
+
+static umode_t pvt_hwmon_is_visible(const void *data,
+				    enum hwmon_sensor_types type,
+				    u32 attr, int ch)
+{
+	if (!pvt_hwmon_channel_is_valid(type, ch))
+		return 0;
+
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			return 0644;
+		}
+		break;
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+		case hwmon_temp_type:
+		case hwmon_temp_label:
+			return 0444;
+		case hwmon_temp_min:
+		case hwmon_temp_max:
+			return pvt_limit_is_visible(ch);
+		case hwmon_temp_min_alarm:
+		case hwmon_temp_max_alarm:
+			return pvt_alarm_is_visible(ch);
+		case hwmon_temp_offset:
+			return 0644;
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+		case hwmon_in_label:
+			return 0444;
+		case hwmon_in_min:
+		case hwmon_in_max:
+			return pvt_limit_is_visible(PVT_VOLT + ch);
+		case hwmon_in_min_alarm:
+		case hwmon_in_max_alarm:
+			return pvt_alarm_is_visible(PVT_VOLT + ch);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int pvt_read_trim(struct pvt_hwmon *pvt, long *val)
+{
+	u32 data;
+
+	data = readl(pvt->regs + PVT_CTRL);
+	*val = FIELD_GET(PVT_CTRL_TRIM_MASK, data) * PVT_TRIM_STEP;
+
+	return 0;
+}
+
+static int pvt_write_trim(struct pvt_hwmon *pvt, long val)
+{
+	u32 trim;
+	int ret;
+
+	/*
+	 * Serialize trim update, since a part of the register is changed and
+	 * the controller is supposed to be disabled during this operation.
+	 */
+	ret = mutex_lock_interruptible(&pvt->iface_mtx);
+	if (ret)
+		return ret;
+
+	trim = pvt_calc_trim(val);
+	pvt_set_trim(pvt, trim);
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	return 0;
+}
+
+static int pvt_read_timeout(struct pvt_hwmon *pvt, long *val)
+{
+	int ret;
+
+	ret = mutex_lock_interruptible(&pvt->iface_mtx);
+	if (ret)
+		return ret;
+
+	/* Return the result in msec as hwmon sysfs interface requires. */
+	*val = ktime_to_ms(pvt->timeout);
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	return 0;
+}
+
+static int pvt_write_timeout(struct pvt_hwmon *pvt, long val)
+{
+	unsigned long rate;
+	ktime_t kt, cache;
+	u32 data;
+	int ret;
+
+	rate = clk_get_rate(pvt->clks[PVT_CLOCK_REF].clk);
+	if (!rate)
+		return -ENODEV;
+
+	/*
+	 * If alarms are enabled, the requested timeout must be divided
+	 * between all available sensors to have the requested delay
+	 * applicable to each individual sensor.
+	 */
+	cache = kt = ms_to_ktime(val);
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+	kt = ktime_divns(kt, PVT_SENSORS_NUM);
+#endif
+
+	/*
+	 * Subtract a constant lag, which always persists due to the limited
+	 * PVT sampling rate. Make sure the timeout is not negative.
+	 */
+	kt = ktime_sub_ns(kt, PVT_TOUT_MIN);
+	if (ktime_to_ns(kt) < 0)
+		kt = ktime_set(0, 0);
+
+	/*
+	 * Finally recalculate the timeout in terms of the reference clock
+	 * period.
+	 */
+	data = ktime_divns(kt * rate, NSEC_PER_SEC);
+
+	/*
+	 * Update the measurements delay, but lock the interface first, since
+	 * we have to disable PVT in order to have the new delay actually
+	 * updated.
+	 */
+	ret = mutex_lock_interruptible(&pvt->iface_mtx);
+	if (ret)
+		return ret;
+
+	pvt_set_tout(pvt, data);
+	pvt->timeout = cache;
+
+	mutex_unlock(&pvt->iface_mtx);
+
+	return 0;
+}
+
+static int pvt_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			  u32 attr, int ch, long *val)
+{
+	struct pvt_hwmon *pvt = dev_get_drvdata(dev);
+
+	if (!pvt_hwmon_channel_is_valid(type, ch))
+		return -EINVAL;
+
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			return pvt_read_timeout(pvt, val);
+		}
+		break;
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+			return pvt_read_data(pvt, ch, val);
+		case hwmon_temp_type:
+			*val = 1;
+			return 0;
+		case hwmon_temp_min:
+			return pvt_read_limit(pvt, ch, true, val);
+		case hwmon_temp_max:
+			return pvt_read_limit(pvt, ch, false, val);
+		case hwmon_temp_min_alarm:
+			return pvt_read_alarm(pvt, ch, true, val);
+		case hwmon_temp_max_alarm:
+			return pvt_read_alarm(pvt, ch, false, val);
+		case hwmon_temp_offset:
+			return pvt_read_trim(pvt, val);
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+			return pvt_read_data(pvt, PVT_VOLT + ch, val);
+		case hwmon_in_min:
+			return pvt_read_limit(pvt, PVT_VOLT + ch, true, val);
+		case hwmon_in_max:
+			return pvt_read_limit(pvt, PVT_VOLT + ch, false, val);
+		case hwmon_in_min_alarm:
+			return pvt_read_alarm(pvt, PVT_VOLT + ch, true, val);
+		case hwmon_in_max_alarm:
+			return pvt_read_alarm(pvt, PVT_VOLT + ch, false, val);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int pvt_hwmon_read_string(struct device *dev,
+				 enum hwmon_sensor_types type,
+				 u32 attr, int ch, const char **str)
+{
+	if (!pvt_hwmon_channel_is_valid(type, ch))
+		return -EINVAL;
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_label:
+			*str = pvt_info[ch].label;
+			return 0;
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_label:
+			*str = pvt_info[PVT_VOLT + ch].label;
+			return 0;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int pvt_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			   u32 attr, int ch, long val)
+{
+	struct pvt_hwmon *pvt = dev_get_drvdata(dev);
+
+	if (!pvt_hwmon_channel_is_valid(type, ch))
+		return -EINVAL;
+
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			return pvt_write_timeout(pvt, val);
+		}
+		break;
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_min:
+			return pvt_write_limit(pvt, ch, true, val);
+		case hwmon_temp_max:
+			return pvt_write_limit(pvt, ch, false, val);
+		case hwmon_temp_offset:
+			return pvt_write_trim(pvt, val);
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_min:
+			return pvt_write_limit(pvt, PVT_VOLT + ch, true, val);
+		case hwmon_in_max:
+			return pvt_write_limit(pvt, PVT_VOLT + ch, false, val);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static const struct hwmon_ops pvt_hwmon_ops = {
+	.is_visible = pvt_hwmon_is_visible,
+	.read = pvt_hwmon_read,
+	.read_string = pvt_hwmon_read_string,
+	.write = pvt_hwmon_write
+};
+
+static const struct hwmon_chip_info pvt_hwmon_info = {
+	.ops = &pvt_hwmon_ops,
+	.info = pvt_channel_info
+};
+
+static void pvt_clear_data(void *data)
+{
+	struct pvt_hwmon *pvt = data;
+#if !defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+	int idx;
+
+	for (idx = 0; idx < PVT_SENSORS_NUM; ++idx)
+		complete_all(&pvt->cache[idx].conversion);
+#endif
+
+	mutex_destroy(&pvt->iface_mtx);
+}
+
+static struct pvt_hwmon *pvt_create_data(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pvt_hwmon *pvt;
+	int ret, idx;
+
+	pvt = devm_kzalloc(dev, sizeof(*pvt), GFP_KERNEL);
+	if (!pvt)
+		return ERR_PTR(-ENOMEM);
+
+	ret = devm_add_action(dev, pvt_clear_data, pvt);
+	if (ret) {
+		dev_err(dev, "Can't add PVT data clear action\n");
+		return ERR_PTR(ret);
+	}
+
+	pvt->dev = dev;
+	pvt->sensor = PVT_SENSOR_FIRST;
+	mutex_init(&pvt->iface_mtx);
+
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+	for (idx = 0; idx < PVT_SENSORS_NUM; ++idx)
+		seqlock_init(&pvt->cache[idx].data_seqlock);
+#else
+	for (idx = 0; idx < PVT_SENSORS_NUM; ++idx)
+		init_completion(&pvt->cache[idx].conversion);
+#endif
+
+	return pvt;
+}
+
+static int pvt_request_regs(struct pvt_hwmon *pvt)
+{
+	struct platform_device *pdev = to_platform_device(pvt->dev);
+
+	pvt->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pvt->regs))
+		return PTR_ERR(pvt->regs);
+
+	return 0;
+}
+
+static void pvt_disable_clks(void *data)
+{
+	struct pvt_hwmon *pvt = data;
+
+	clk_bulk_disable_unprepare(PVT_CLOCK_NUM, pvt->clks);
+}
+
+static int pvt_request_clks(struct pvt_hwmon *pvt)
+{
+	int ret;
+
+	pvt->clks[PVT_CLOCK_APB].id = "pclk";
+	pvt->clks[PVT_CLOCK_REF].id = "ref";
+
+	ret = devm_clk_bulk_get(pvt->dev, PVT_CLOCK_NUM, pvt->clks);
+	if (ret) {
+		dev_err(pvt->dev, "Couldn't get PVT clocks descriptors\n");
+		return ret;
+	}
+
+	ret = clk_bulk_prepare_enable(PVT_CLOCK_NUM, pvt->clks);
+	if (ret) {
+		dev_err(pvt->dev, "Couldn't enable the PVT clocks\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(pvt->dev, pvt_disable_clks, pvt);
+	if (ret) {
+		dev_err(pvt->dev, "Can't add PVT clocks disable action\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pvt_check_pwr(struct pvt_hwmon *pvt)
+{
+	unsigned long tout;
+	int ret = 0;
+	u32 data;
+
+	/*
+	 * Test out the sensor conversion functionality. If it is not done on
+	 * time then the domain must have been unpowered and we won't be able
+	 * to use the device later in this driver.
+	 * Note If the power source is lost during the normal driver work the
+	 * data read procedure will either return -ETIMEDOUT (for the
+	 * alarm-less driver configuration) or just stop the repeated
+	 * conversion. In the later case alas we won't be able to detect the
+	 * problem.
+	 */
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_ALL, PVT_INTR_ALL);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, PVT_CTRL_EN);
+	pvt_set_tout(pvt, 0);
+	readl(pvt->regs + PVT_DATA);
+
+	tout = PVT_TOUT_MIN / NSEC_PER_USEC;
+	usleep_range(tout, 2 * tout);
+
+	data = readl(pvt->regs + PVT_DATA);
+	if (!(data & PVT_DATA_VALID)) {
+		ret = -ENODEV;
+		dev_err(pvt->dev, "Sensor is powered down\n");
+	}
+
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+
+	return ret;
+}
+
+static int pvt_init_iface(struct pvt_hwmon *pvt)
+{
+	unsigned long rate;
+	u32 trim, temp;
+
+	rate = clk_get_rate(pvt->clks[PVT_CLOCK_REF].clk);
+	if (!rate) {
+		dev_err(pvt->dev, "Invalid reference clock rate\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Make sure all interrupts and controller are disabled so not to
+	 * accidentally have ISR executed before the driver data is fully
+	 * initialized. Clear the IRQ status as well.
+	 */
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_ALL, PVT_INTR_ALL);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	readl(pvt->regs + PVT_CLR_INTR);
+	readl(pvt->regs + PVT_DATA);
+
+	/* Setup default sensor mode, timeout and temperature trim. */
+	pvt_set_mode(pvt, pvt_info[pvt->sensor].mode);
+	pvt_set_tout(pvt, PVT_TOUT_DEF);
+
+	/*
+	 * Preserve the current ref-clock based delay (Ttotal) between the
+	 * sensors data samples in the driver data so not to recalculate it
+	 * each time on the data requests and timeout reads. It consists of the
+	 * delay introduced by the internal ref-clock timer (N / Fclk) and the
+	 * constant timeout caused by each conversion latency (Tmin):
+	 *   Ttotal = N / Fclk + Tmin
+	 * If alarms are enabled the sensors are polled one after another and
+	 * in order to get the next measurement of a particular sensor the
+	 * caller will have to wait for at most until all the others are
+	 * polled. In that case the formulae will look a bit different:
+	 *   Ttotal = 5 * (N / Fclk + Tmin)
+	 */
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+	pvt->timeout = ktime_set(PVT_SENSORS_NUM * PVT_TOUT_DEF, 0);
+	pvt->timeout = ktime_divns(pvt->timeout, rate);
+	pvt->timeout = ktime_add_ns(pvt->timeout, PVT_SENSORS_NUM * PVT_TOUT_MIN);
+#else
+	pvt->timeout = ktime_set(PVT_TOUT_DEF, 0);
+	pvt->timeout = ktime_divns(pvt->timeout, rate);
+	pvt->timeout = ktime_add_ns(pvt->timeout, PVT_TOUT_MIN);
+#endif
+
+	trim = PVT_TRIM_DEF;
+	if (!of_property_read_u32(pvt->dev->of_node,
+	     "baikal,pvt-temp-offset-millicelsius", &temp))
+		trim = pvt_calc_trim(temp);
+
+	pvt_set_trim(pvt, trim);
+
+	return 0;
+}
+
+static int pvt_request_irq(struct pvt_hwmon *pvt)
+{
+	struct platform_device *pdev = to_platform_device(pvt->dev);
+	int ret;
+
+	pvt->irq = platform_get_irq(pdev, 0);
+	if (pvt->irq < 0)
+		return pvt->irq;
+
+	ret = devm_request_threaded_irq(pvt->dev, pvt->irq,
+					pvt_hard_isr, pvt_soft_isr,
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+					IRQF_SHARED | IRQF_TRIGGER_HIGH |
+					IRQF_ONESHOT,
+#else
+					IRQF_SHARED | IRQF_TRIGGER_HIGH,
+#endif
+					"pvt", pvt);
+	if (ret) {
+		dev_err(pvt->dev, "Couldn't request PVT IRQ\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pvt_create_hwmon(struct pvt_hwmon *pvt)
+{
+	pvt->hwmon = devm_hwmon_device_register_with_info(pvt->dev, "pvt", pvt,
+		&pvt_hwmon_info, NULL);
+	if (IS_ERR(pvt->hwmon)) {
+		dev_err(pvt->dev, "Couldn't create hwmon device\n");
+		return PTR_ERR(pvt->hwmon);
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+
+static void pvt_disable_iface(void *data)
+{
+	struct pvt_hwmon *pvt = data;
+
+	mutex_lock(&pvt->iface_mtx);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID,
+		   PVT_INTR_DVALID);
+	mutex_unlock(&pvt->iface_mtx);
+}
+
+static int pvt_enable_iface(struct pvt_hwmon *pvt)
+{
+	int ret;
+
+	ret = devm_add_action(pvt->dev, pvt_disable_iface, pvt);
+	if (ret) {
+		dev_err(pvt->dev, "Can't add PVT disable interface action\n");
+		return ret;
+	}
+
+	/*
+	 * Enable sensors data conversion and IRQ. We need to lock the
+	 * interface mutex since hwmon has just been created and the
+	 * corresponding sysfs files are accessible from user-space,
+	 * which theoretically may cause races.
+	 */
+	mutex_lock(&pvt->iface_mtx);
+	pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID, 0);
+	pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, PVT_CTRL_EN);
+	mutex_unlock(&pvt->iface_mtx);
+
+	return 0;
+}
+
+#else /* !CONFIG_SENSORS_BT1_PVT_ALARMS */
+
+static int pvt_enable_iface(struct pvt_hwmon *pvt)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_SENSORS_BT1_PVT_ALARMS */
+
+static int pvt_probe(struct platform_device *pdev)
+{
+	struct pvt_hwmon *pvt;
+	int ret;
+
+	pvt = pvt_create_data(pdev);
+	if (IS_ERR(pvt))
+		return PTR_ERR(pvt);
+
+	ret = pvt_request_regs(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_request_clks(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_check_pwr(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_init_iface(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_request_irq(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_create_hwmon(pvt);
+	if (ret)
+		return ret;
+
+	ret = pvt_enable_iface(pvt);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id pvt_of_match[] = {
+	{ .compatible = "baikal,bt1-pvt" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pvt_of_match);
+
+static struct platform_driver pvt_driver = {
+	.probe = pvt_probe,
+	.driver = {
+		.name = "bt1-pvt",
+		.of_match_table = pvt_of_match
+	}
+};
+module_platform_driver(pvt_driver);
+
+MODULE_AUTHOR("Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>");
+MODULE_DESCRIPTION("Baikal-T1 PVT driver");
+MODULE_LICENSE("GPL v2");