summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/ina2xx.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/hwmon/ina2xx.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/hwmon/ina2xx.c')
-rw-r--r--drivers/hwmon/ina2xx.c731
1 files changed, 731 insertions, 0 deletions
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
new file mode 100644
index 0000000000..d8415d1f21
--- /dev/null
+++ b/drivers/hwmon/ina2xx.c
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Texas Instruments INA219, INA226 power monitor chips
+ *
+ * INA219:
+ * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: https://www.ti.com/product/ina219
+ *
+ * INA220:
+ * Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: https://www.ti.com/product/ina220
+ *
+ * INA226:
+ * Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: https://www.ti.com/product/ina226
+ *
+ * INA230:
+ * Bi-directional Current/Power Monitor with I2C Interface
+ * Datasheet: https://www.ti.com/product/ina230
+ *
+ * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
+ * Thanks to Jan Volkering
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/util_macros.h>
+#include <linux/regmap.h>
+
+#include <linux/platform_data/ina2xx.h>
+
+/* common register definitions */
+#define INA2XX_CONFIG 0x00
+#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
+#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */
+#define INA2XX_POWER 0x03 /* readonly */
+#define INA2XX_CURRENT 0x04 /* readonly */
+#define INA2XX_CALIBRATION 0x05
+
+/* INA226 register definitions */
+#define INA226_MASK_ENABLE 0x06
+#define INA226_ALERT_LIMIT 0x07
+#define INA226_DIE_ID 0xFF
+
+/* register count */
+#define INA219_REGISTERS 6
+#define INA226_REGISTERS 8
+
+#define INA2XX_MAX_REGISTERS 8
+
+/* settings - depend on use case */
+#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */
+#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */
+
+/* worst case is 68.10 ms (~14.6Hz, ina219) */
+#define INA2XX_CONVERSION_RATE 15
+#define INA2XX_MAX_DELAY 69 /* worst case delay in ms */
+
+#define INA2XX_RSHUNT_DEFAULT 10000
+
+/* bit mask for reading the averaging setting in the configuration register */
+#define INA226_AVG_RD_MASK 0x0E00
+
+#define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9)
+#define INA226_SHIFT_AVG(val) ((val) << 9)
+
+/* bit number of alert functions in Mask/Enable Register */
+#define INA226_SHUNT_OVER_VOLTAGE_BIT 15
+#define INA226_SHUNT_UNDER_VOLTAGE_BIT 14
+#define INA226_BUS_OVER_VOLTAGE_BIT 13
+#define INA226_BUS_UNDER_VOLTAGE_BIT 12
+#define INA226_POWER_OVER_LIMIT_BIT 11
+
+/* bit mask for alert config bits of Mask/Enable Register */
+#define INA226_ALERT_CONFIG_MASK 0xFC00
+#define INA226_ALERT_FUNCTION_FLAG BIT(4)
+
+/* common attrs, ina226 attrs and NULL */
+#define INA2XX_MAX_ATTRIBUTE_GROUPS 3
+
+/*
+ * Both bus voltage and shunt voltage conversion times for ina226 are set
+ * to 0b0100 on POR, which translates to 2200 microseconds in total.
+ */
+#define INA226_TOTAL_CONV_TIME_DEFAULT 2200
+
+static struct regmap_config ina2xx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+};
+
+enum ina2xx_ids { ina219, ina226 };
+
+struct ina2xx_config {
+ u16 config_default;
+ int calibration_value;
+ int registers;
+ int shunt_div;
+ int bus_voltage_shift;
+ int bus_voltage_lsb; /* uV */
+ int power_lsb_factor;
+};
+
+struct ina2xx_data {
+ const struct ina2xx_config *config;
+
+ long rshunt;
+ long current_lsb_uA;
+ long power_lsb_uW;
+ struct mutex config_lock;
+ struct regmap *regmap;
+
+ const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
+};
+
+static const struct ina2xx_config ina2xx_config[] = {
+ [ina219] = {
+ .config_default = INA219_CONFIG_DEFAULT,
+ .calibration_value = 4096,
+ .registers = INA219_REGISTERS,
+ .shunt_div = 100,
+ .bus_voltage_shift = 3,
+ .bus_voltage_lsb = 4000,
+ .power_lsb_factor = 20,
+ },
+ [ina226] = {
+ .config_default = INA226_CONFIG_DEFAULT,
+ .calibration_value = 2048,
+ .registers = INA226_REGISTERS,
+ .shunt_div = 400,
+ .bus_voltage_shift = 0,
+ .bus_voltage_lsb = 1250,
+ .power_lsb_factor = 25,
+ },
+};
+
+/*
+ * Available averaging rates for ina226. The indices correspond with
+ * the bit values expected by the chip (according to the ina226 datasheet,
+ * table 3 AVG bit settings, found at
+ * https://www.ti.com/lit/ds/symlink/ina226.pdf.
+ */
+static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
+
+static int ina226_reg_to_interval(u16 config)
+{
+ int avg = ina226_avg_tab[INA226_READ_AVG(config)];
+
+ /*
+ * Multiply the total conversion time by the number of averages.
+ * Return the result in milliseconds.
+ */
+ return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000);
+}
+
+/*
+ * Return the new, shifted AVG field value of CONFIG register,
+ * to use with regmap_update_bits
+ */
+static u16 ina226_interval_to_reg(int interval)
+{
+ int avg, avg_bits;
+
+ avg = DIV_ROUND_CLOSEST(interval * 1000,
+ INA226_TOTAL_CONV_TIME_DEFAULT);
+ avg_bits = find_closest(avg, ina226_avg_tab,
+ ARRAY_SIZE(ina226_avg_tab));
+
+ return INA226_SHIFT_AVG(avg_bits);
+}
+
+/*
+ * Calibration register is set to the best value, which eliminates
+ * truncation errors on calculating current register in hardware.
+ * According to datasheet (eq. 3) the best values are 2048 for
+ * ina226 and 4096 for ina219. They are hardcoded as calibration_value.
+ */
+static int ina2xx_calibrate(struct ina2xx_data *data)
+{
+ return regmap_write(data->regmap, INA2XX_CALIBRATION,
+ data->config->calibration_value);
+}
+
+/*
+ * Initialize the configuration and calibration registers.
+ */
+static int ina2xx_init(struct ina2xx_data *data)
+{
+ int ret = regmap_write(data->regmap, INA2XX_CONFIG,
+ data->config->config_default);
+ if (ret < 0)
+ return ret;
+
+ return ina2xx_calibrate(data);
+}
+
+static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ int ret, retry;
+
+ dev_dbg(dev, "Starting register %d read\n", reg);
+
+ for (retry = 5; retry; retry--) {
+
+ ret = regmap_read(data->regmap, reg, regval);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "read %d, val = 0x%04x\n", reg, *regval);
+
+ /*
+ * If the current value in the calibration register is 0, the
+ * power and current registers will also remain at 0. In case
+ * the chip has been reset let's check the calibration
+ * register and reinitialize if needed.
+ * We do that extra read of the calibration register if there
+ * is some hint of a chip reset.
+ */
+ if (*regval == 0) {
+ unsigned int cal;
+
+ ret = regmap_read(data->regmap, INA2XX_CALIBRATION,
+ &cal);
+ if (ret < 0)
+ return ret;
+
+ if (cal == 0) {
+ dev_warn(dev, "chip not calibrated, reinitializing\n");
+
+ ret = ina2xx_init(data);
+ if (ret < 0)
+ return ret;
+ /*
+ * Let's make sure the power and current
+ * registers have been updated before trying
+ * again.
+ */
+ msleep(INA2XX_MAX_DELAY);
+ continue;
+ }
+ }
+ return 0;
+ }
+
+ /*
+ * If we're here then although all write operations succeeded, the
+ * chip still returns 0 in the calibration register. Nothing more we
+ * can do here.
+ */
+ dev_err(dev, "unable to reinitialize the chip\n");
+ return -ENODEV;
+}
+
+static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
+ unsigned int regval)
+{
+ int val;
+
+ switch (reg) {
+ case INA2XX_SHUNT_VOLTAGE:
+ /* signed register */
+ val = DIV_ROUND_CLOSEST((s16)regval, data->config->shunt_div);
+ break;
+ case INA2XX_BUS_VOLTAGE:
+ val = (regval >> data->config->bus_voltage_shift)
+ * data->config->bus_voltage_lsb;
+ val = DIV_ROUND_CLOSEST(val, 1000);
+ break;
+ case INA2XX_POWER:
+ val = regval * data->power_lsb_uW;
+ break;
+ case INA2XX_CURRENT:
+ /* signed register, result in mA */
+ val = (s16)regval * data->current_lsb_uA;
+ val = DIV_ROUND_CLOSEST(val, 1000);
+ break;
+ case INA2XX_CALIBRATION:
+ val = regval;
+ break;
+ default:
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+static ssize_t ina2xx_value_show(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
+
+ int err = ina2xx_read_reg(dev, attr->index, &regval);
+
+ if (err < 0)
+ return err;
+
+ return sysfs_emit(buf, "%d\n", ina2xx_get_value(data, attr->index, regval));
+}
+
+static int ina226_reg_to_alert(struct ina2xx_data *data, u8 bit, u16 regval)
+{
+ int reg;
+
+ switch (bit) {
+ case INA226_SHUNT_OVER_VOLTAGE_BIT:
+ case INA226_SHUNT_UNDER_VOLTAGE_BIT:
+ reg = INA2XX_SHUNT_VOLTAGE;
+ break;
+ case INA226_BUS_OVER_VOLTAGE_BIT:
+ case INA226_BUS_UNDER_VOLTAGE_BIT:
+ reg = INA2XX_BUS_VOLTAGE;
+ break;
+ case INA226_POWER_OVER_LIMIT_BIT:
+ reg = INA2XX_POWER;
+ break;
+ default:
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+
+ return ina2xx_get_value(data, reg, regval);
+}
+
+/*
+ * Turns alert limit values into register values.
+ * Opposite of the formula in ina2xx_get_value().
+ */
+static s16 ina226_alert_to_reg(struct ina2xx_data *data, u8 bit, int val)
+{
+ switch (bit) {
+ case INA226_SHUNT_OVER_VOLTAGE_BIT:
+ case INA226_SHUNT_UNDER_VOLTAGE_BIT:
+ val *= data->config->shunt_div;
+ return clamp_val(val, SHRT_MIN, SHRT_MAX);
+ case INA226_BUS_OVER_VOLTAGE_BIT:
+ case INA226_BUS_UNDER_VOLTAGE_BIT:
+ val = (val * 1000) << data->config->bus_voltage_shift;
+ val = DIV_ROUND_CLOSEST(val, data->config->bus_voltage_lsb);
+ return clamp_val(val, 0, SHRT_MAX);
+ case INA226_POWER_OVER_LIMIT_BIT:
+ val = DIV_ROUND_CLOSEST(val, data->power_lsb_uW);
+ return clamp_val(val, 0, USHRT_MAX);
+ default:
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+}
+
+static ssize_t ina226_alert_show(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ int regval;
+ int val = 0;
+ int ret;
+
+ mutex_lock(&data->config_lock);
+ ret = regmap_read(data->regmap, INA226_MASK_ENABLE, &regval);
+ if (ret)
+ goto abort;
+
+ if (regval & BIT(attr->index)) {
+ ret = regmap_read(data->regmap, INA226_ALERT_LIMIT, &regval);
+ if (ret)
+ goto abort;
+ val = ina226_reg_to_alert(data, attr->index, regval);
+ }
+
+ ret = sysfs_emit(buf, "%d\n", val);
+abort:
+ mutex_unlock(&data->config_lock);
+ return ret;
+}
+
+static ssize_t ina226_alert_store(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Clear all alerts first to avoid accidentally triggering ALERT pin
+ * due to register write sequence. Then, only enable the alert
+ * if the value is non-zero.
+ */
+ mutex_lock(&data->config_lock);
+ ret = regmap_update_bits(data->regmap, INA226_MASK_ENABLE,
+ INA226_ALERT_CONFIG_MASK, 0);
+ if (ret < 0)
+ goto abort;
+
+ ret = regmap_write(data->regmap, INA226_ALERT_LIMIT,
+ ina226_alert_to_reg(data, attr->index, val));
+ if (ret < 0)
+ goto abort;
+
+ if (val != 0) {
+ ret = regmap_update_bits(data->regmap, INA226_MASK_ENABLE,
+ INA226_ALERT_CONFIG_MASK,
+ BIT(attr->index));
+ if (ret < 0)
+ goto abort;
+ }
+
+ ret = count;
+abort:
+ mutex_unlock(&data->config_lock);
+ return ret;
+}
+
+static ssize_t ina226_alarm_show(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ int regval;
+ int alarm = 0;
+ int ret;
+
+ ret = regmap_read(data->regmap, INA226_MASK_ENABLE, &regval);
+ if (ret)
+ return ret;
+
+ alarm = (regval & BIT(attr->index)) &&
+ (regval & INA226_ALERT_FUNCTION_FLAG);
+ return sysfs_emit(buf, "%d\n", alarm);
+}
+
+/*
+ * In order to keep calibration register value fixed, the product
+ * of current_lsb and shunt_resistor should also be fixed and equal
+ * to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order
+ * to keep the scale.
+ */
+static int ina2xx_set_shunt(struct ina2xx_data *data, long val)
+{
+ unsigned int dividend = DIV_ROUND_CLOSEST(1000000000,
+ data->config->shunt_div);
+ if (val <= 0 || val > dividend)
+ return -EINVAL;
+
+ mutex_lock(&data->config_lock);
+ data->rshunt = val;
+ data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val);
+ data->power_lsb_uW = data->config->power_lsb_factor *
+ data->current_lsb_uA;
+ mutex_unlock(&data->config_lock);
+
+ return 0;
+}
+
+static ssize_t ina2xx_shunt_show(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%li\n", data->rshunt);
+}
+
+static ssize_t ina2xx_shunt_store(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ int status;
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ status = kstrtoul(buf, 10, &val);
+ if (status < 0)
+ return status;
+
+ status = ina2xx_set_shunt(data, val);
+ if (status < 0)
+ return status;
+ return count;
+}
+
+static ssize_t ina226_interval_store(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int status;
+
+ status = kstrtoul(buf, 10, &val);
+ if (status < 0)
+ return status;
+
+ if (val > INT_MAX || val == 0)
+ return -EINVAL;
+
+ status = regmap_update_bits(data->regmap, INA2XX_CONFIG,
+ INA226_AVG_RD_MASK,
+ ina226_interval_to_reg(val));
+ if (status < 0)
+ return status;
+
+ return count;
+}
+
+static ssize_t ina226_interval_show(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ int status;
+ unsigned int regval;
+
+ status = regmap_read(data->regmap, INA2XX_CONFIG, &regval);
+ if (status)
+ return status;
+
+ return sysfs_emit(buf, "%d\n", ina226_reg_to_interval(regval));
+}
+
+/* shunt voltage */
+static SENSOR_DEVICE_ATTR_RO(in0_input, ina2xx_value, INA2XX_SHUNT_VOLTAGE);
+/* shunt voltage over/under voltage alert setting and alarm */
+static SENSOR_DEVICE_ATTR_RW(in0_crit, ina226_alert,
+ INA226_SHUNT_OVER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RW(in0_lcrit, ina226_alert,
+ INA226_SHUNT_UNDER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RO(in0_crit_alarm, ina226_alarm,
+ INA226_SHUNT_OVER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RO(in0_lcrit_alarm, ina226_alarm,
+ INA226_SHUNT_UNDER_VOLTAGE_BIT);
+
+/* bus voltage */
+static SENSOR_DEVICE_ATTR_RO(in1_input, ina2xx_value, INA2XX_BUS_VOLTAGE);
+/* bus voltage over/under voltage alert setting and alarm */
+static SENSOR_DEVICE_ATTR_RW(in1_crit, ina226_alert,
+ INA226_BUS_OVER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RW(in1_lcrit, ina226_alert,
+ INA226_BUS_UNDER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RO(in1_crit_alarm, ina226_alarm,
+ INA226_BUS_OVER_VOLTAGE_BIT);
+static SENSOR_DEVICE_ATTR_RO(in1_lcrit_alarm, ina226_alarm,
+ INA226_BUS_UNDER_VOLTAGE_BIT);
+
+/* calculated current */
+static SENSOR_DEVICE_ATTR_RO(curr1_input, ina2xx_value, INA2XX_CURRENT);
+
+/* calculated power */
+static SENSOR_DEVICE_ATTR_RO(power1_input, ina2xx_value, INA2XX_POWER);
+/* over-limit power alert setting and alarm */
+static SENSOR_DEVICE_ATTR_RW(power1_crit, ina226_alert,
+ INA226_POWER_OVER_LIMIT_BIT);
+static SENSOR_DEVICE_ATTR_RO(power1_crit_alarm, ina226_alarm,
+ INA226_POWER_OVER_LIMIT_BIT);
+
+/* shunt resistance */
+static SENSOR_DEVICE_ATTR_RW(shunt_resistor, ina2xx_shunt, INA2XX_CALIBRATION);
+
+/* update interval (ina226 only) */
+static SENSOR_DEVICE_ATTR_RW(update_interval, ina226_interval, 0);
+
+/* pointers to created device attributes */
+static struct attribute *ina2xx_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_power1_input.dev_attr.attr,
+ &sensor_dev_attr_shunt_resistor.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ina2xx_group = {
+ .attrs = ina2xx_attrs,
+};
+
+static struct attribute *ina226_attrs[] = {
+ &sensor_dev_attr_in0_crit.dev_attr.attr,
+ &sensor_dev_attr_in0_lcrit.dev_attr.attr,
+ &sensor_dev_attr_in0_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_lcrit_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_crit.dev_attr.attr,
+ &sensor_dev_attr_in1_lcrit.dev_attr.attr,
+ &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_lcrit_alarm.dev_attr.attr,
+ &sensor_dev_attr_power1_crit.dev_attr.attr,
+ &sensor_dev_attr_power1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ina226_group = {
+ .attrs = ina226_attrs,
+};
+
+static const struct i2c_device_id ina2xx_id[];
+
+static int ina2xx_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct ina2xx_data *data;
+ struct device *hwmon_dev;
+ u32 val;
+ int ret, group = 0;
+ enum ina2xx_ids chip;
+
+ if (client->dev.of_node)
+ chip = (uintptr_t)of_device_get_match_data(&client->dev);
+ else
+ chip = i2c_match_id(ina2xx_id, client)->driver_data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* set the device type */
+ data->config = &ina2xx_config[chip];
+ mutex_init(&data->config_lock);
+
+ if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
+ struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata)
+ val = pdata->shunt_uohms;
+ else
+ val = INA2XX_RSHUNT_DEFAULT;
+ }
+
+ ina2xx_set_shunt(data, val);
+
+ ina2xx_regmap_config.max_register = data->config->registers;
+
+ data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+ if (IS_ERR(data->regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(data->regmap);
+ }
+
+ ret = devm_regulator_get_enable(dev, "vs");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable vs regulator\n");
+
+ ret = ina2xx_init(data);
+ if (ret < 0) {
+ dev_err(dev, "error configuring the device: %d\n", ret);
+ return -ENODEV;
+ }
+
+ data->groups[group++] = &ina2xx_group;
+ if (chip == ina226)
+ data->groups[group++] = &ina226_group;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
+ client->name, data->rshunt);
+
+ return 0;
+}
+
+static const struct i2c_device_id ina2xx_id[] = {
+ { "ina219", ina219 },
+ { "ina220", ina219 },
+ { "ina226", ina226 },
+ { "ina230", ina226 },
+ { "ina231", ina226 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ina2xx_id);
+
+static const struct of_device_id __maybe_unused ina2xx_of_match[] = {
+ {
+ .compatible = "ti,ina219",
+ .data = (void *)ina219
+ },
+ {
+ .compatible = "ti,ina220",
+ .data = (void *)ina219
+ },
+ {
+ .compatible = "ti,ina226",
+ .data = (void *)ina226
+ },
+ {
+ .compatible = "ti,ina230",
+ .data = (void *)ina226
+ },
+ {
+ .compatible = "ti,ina231",
+ .data = (void *)ina226
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ina2xx_of_match);
+
+static struct i2c_driver ina2xx_driver = {
+ .driver = {
+ .name = "ina2xx",
+ .of_match_table = of_match_ptr(ina2xx_of_match),
+ },
+ .probe = ina2xx_probe,
+ .id_table = ina2xx_id,
+};
+
+module_i2c_driver(ina2xx_driver);
+
+MODULE_AUTHOR("Lothar Felten <l-felten@ti.com>");
+MODULE_DESCRIPTION("ina2xx driver");
+MODULE_LICENSE("GPL");