Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 928 insertions, 0 deletions

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
new file mode 100644
index 0000000000..50a8b9c3f9
--- /dev/null
+++ b/drivers/hwmon/mr75203.c
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MaxLinear, Inc.
+ *
+ * This driver is a hardware monitoring driver for PVT controller
+ * (MR75203) which is used to configure & control Moortec embedded
+ * analog IP to enable multiple embedded temperature sensor(TS),
+ * voltage monitor(VM) & process detector(PD) modules.
+ */
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/hwmon.h>
+#include <linux/kstrtox.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/units.h>
+
+/* PVT Common register */
+#define PVT_IP_CONFIG	0x04
+#define TS_NUM_MSK	GENMASK(4, 0)
+#define TS_NUM_SFT	0
+#define PD_NUM_MSK	GENMASK(12, 8)
+#define PD_NUM_SFT	8
+#define VM_NUM_MSK	GENMASK(20, 16)
+#define VM_NUM_SFT	16
+#define CH_NUM_MSK	GENMASK(31, 24)
+#define CH_NUM_SFT	24
+
+#define VM_NUM_MAX	(VM_NUM_MSK >> VM_NUM_SFT)
+
+/* Macro Common Register */
+#define CLK_SYNTH		0x00
+#define CLK_SYNTH_LO_SFT	0
+#define CLK_SYNTH_HI_SFT	8
+#define CLK_SYNTH_HOLD_SFT	16
+#define CLK_SYNTH_EN		BIT(24)
+#define CLK_SYS_CYCLES_MAX	514
+#define CLK_SYS_CYCLES_MIN	2
+
+#define SDIF_DISABLE	0x04
+
+#define SDIF_STAT	0x08
+#define SDIF_BUSY	BIT(0)
+#define SDIF_LOCK	BIT(1)
+
+#define SDIF_W		0x0c
+#define SDIF_PROG	BIT(31)
+#define SDIF_WRN_W	BIT(27)
+#define SDIF_WRN_R	0x00
+#define SDIF_ADDR_SFT	24
+
+#define SDIF_HALT	0x10
+#define SDIF_CTRL	0x14
+#define SDIF_SMPL_CTRL	0x20
+
+/* TS & PD Individual Macro Register */
+#define COM_REG_SIZE	0x40
+
+#define SDIF_DONE(n)	(COM_REG_SIZE + 0x14 + 0x40 * (n))
+#define SDIF_SMPL_DONE	BIT(0)
+
+#define SDIF_DATA(n)	(COM_REG_SIZE + 0x18 + 0x40 * (n))
+#define SAMPLE_DATA_MSK	GENMASK(15, 0)
+
+#define HILO_RESET(n)	(COM_REG_SIZE + 0x2c + 0x40 * (n))
+
+/* VM Individual Macro Register */
+#define VM_COM_REG_SIZE	0x200
+#define VM_SDIF_DONE(vm)	(VM_COM_REG_SIZE + 0x34 + 0x200 * (vm))
+#define VM_SDIF_DATA(vm, ch)	\
+	(VM_COM_REG_SIZE + 0x40 + 0x200 * (vm) + 0x4 * (ch))
+
+/* SDA Slave Register */
+#define IP_CTRL			0x00
+#define IP_RST_REL		BIT(1)
+#define IP_RUN_CONT		BIT(3)
+#define IP_AUTO			BIT(8)
+#define IP_VM_MODE		BIT(10)
+
+#define IP_CFG			0x01
+#define CFG0_MODE_2		BIT(0)
+#define CFG0_PARALLEL_OUT	0
+#define CFG0_12_BIT		0
+#define CFG1_VOL_MEAS_MODE	0
+#define CFG1_PARALLEL_OUT	0
+#define CFG1_14_BIT		0
+
+#define IP_DATA		0x03
+
+#define IP_POLL		0x04
+#define VM_CH_INIT	BIT(20)
+#define VM_CH_REQ	BIT(21)
+
+#define IP_TMR			0x05
+#define POWER_DELAY_CYCLE_256	0x100
+#define POWER_DELAY_CYCLE_64	0x40
+
+#define PVT_POLL_DELAY_US	20
+#define PVT_POLL_TIMEOUT_US	20000
+#define PVT_CONV_BITS		10
+#define PVT_N_CONST		90
+#define PVT_R_CONST		245805
+
+#define PVT_TEMP_MIN_mC		-40000
+#define PVT_TEMP_MAX_mC		125000
+
+/* Temperature coefficients for series 5 */
+#define PVT_SERIES5_H_CONST	200000
+#define PVT_SERIES5_G_CONST	60000
+#define PVT_SERIES5_J_CONST	-100
+#define PVT_SERIES5_CAL5_CONST	4094
+
+/* Temperature coefficients for series 6 */
+#define PVT_SERIES6_H_CONST	249400
+#define PVT_SERIES6_G_CONST	57400
+#define PVT_SERIES6_J_CONST	0
+#define PVT_SERIES6_CAL5_CONST	4096
+
+#define TEMPERATURE_SENSOR_SERIES_5	5
+#define TEMPERATURE_SENSOR_SERIES_6	6
+
+#define PRE_SCALER_X1	1
+#define PRE_SCALER_X2	2
+
+/**
+ * struct voltage_device - VM single input parameters.
+ * @vm_map: Map channel number to VM index.
+ * @ch_map: Map channel number to channel index.
+ * @pre_scaler: Pre scaler value (1 or 2) used to normalize the voltage output
+ *              result.
+ *
+ * The structure provides mapping between channel-number (0..N-1) to VM-index
+ * (0..num_vm-1) and channel-index (0..ch_num-1) where N = num_vm * ch_num.
+ * It also provides normalization factor for the VM equation.
+ */
+struct voltage_device {
+	u32 vm_map;
+	u32 ch_map;
+	u32 pre_scaler;
+};
+
+/**
+ * struct voltage_channels - VM channel count.
+ * @total: Total number of channels in all VMs.
+ * @max: Maximum number of channels among all VMs.
+ *
+ * The structure provides channel count information across all VMs.
+ */
+struct voltage_channels {
+	u32 total;
+	u8 max;
+};
+
+struct temp_coeff {
+	u32 h;
+	u32 g;
+	u32 cal5;
+	s32 j;
+};
+
+struct pvt_device {
+	struct regmap		*c_map;
+	struct regmap		*t_map;
+	struct regmap		*p_map;
+	struct regmap		*v_map;
+	struct clk		*clk;
+	struct reset_control	*rst;
+	struct dentry		*dbgfs_dir;
+	struct voltage_device	*vd;
+	struct voltage_channels	vm_channels;
+	struct temp_coeff	ts_coeff;
+	u32			t_num;
+	u32			p_num;
+	u32			v_num;
+	u32			ip_freq;
+};
+
+static ssize_t pvt_ts_coeff_j_read(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct pvt_device *pvt = file->private_data;
+	unsigned int len;
+	char buf[13];
+
+	len = scnprintf(buf, sizeof(buf), "%d\n", pvt->ts_coeff.j);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_j_write(struct file *file,
+				    const char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct pvt_device *pvt = file->private_data;
+	int ret;
+
+	ret = kstrtos32_from_user(user_buf, count, 0, &pvt->ts_coeff.j);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static const struct file_operations pvt_ts_coeff_j_fops = {
+	.read = pvt_ts_coeff_j_read,
+	.write = pvt_ts_coeff_j_write,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+static void devm_pvt_ts_dbgfs_remove(void *data)
+{
+	struct pvt_device *pvt = (struct pvt_device *)data;
+
+	debugfs_remove_recursive(pvt->dbgfs_dir);
+	pvt->dbgfs_dir = NULL;
+}
+
+static int pvt_ts_dbgfs_create(struct pvt_device *pvt, struct device *dev)
+{
+	pvt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
+
+	debugfs_create_u32("ts_coeff_h", 0644, pvt->dbgfs_dir,
+			   &pvt->ts_coeff.h);
+	debugfs_create_u32("ts_coeff_g", 0644, pvt->dbgfs_dir,
+			   &pvt->ts_coeff.g);
+	debugfs_create_u32("ts_coeff_cal5", 0644, pvt->dbgfs_dir,
+			   &pvt->ts_coeff.cal5);
+	debugfs_create_file("ts_coeff_j", 0644, pvt->dbgfs_dir, pvt,
+			    &pvt_ts_coeff_j_fops);
+
+	return devm_add_action_or_reset(dev, devm_pvt_ts_dbgfs_remove, pvt);
+}
+
+static umode_t pvt_is_visible(const void *data, enum hwmon_sensor_types type,
+			      u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		if (attr == hwmon_temp_input)
+			return 0444;
+		break;
+	case hwmon_in:
+		if (attr == hwmon_in_input)
+			return 0444;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static long pvt_calc_temp(struct pvt_device *pvt, u32 nbs)
+{
+	/*
+	 * Convert the register value to degrees centigrade temperature:
+	 * T = G + H * (n / cal5 - 0.5) + J * F
+	 */
+	struct temp_coeff *ts_coeff = &pvt->ts_coeff;
+
+	s64 tmp = ts_coeff->g +
+		div_s64(ts_coeff->h * (s64)nbs, ts_coeff->cal5) -
+		ts_coeff->h / 2 +
+		div_s64(ts_coeff->j * (s64)pvt->ip_freq, HZ_PER_MHZ);
+
+	return clamp_val(tmp, PVT_TEMP_MIN_mC, PVT_TEMP_MAX_mC);
+}
+
+static int pvt_read_temp(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct pvt_device *pvt = dev_get_drvdata(dev);
+	struct regmap *t_map = pvt->t_map;
+	u32 stat, nbs;
+	int ret;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ret = regmap_read_poll_timeout(t_map, SDIF_DONE(channel),
+					       stat, stat & SDIF_SMPL_DONE,
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		ret = regmap_read(t_map, SDIF_DATA(channel), &nbs);
+		if (ret < 0)
+			return ret;
+
+		nbs &= SAMPLE_DATA_MSK;
+
+		/*
+		 * Convert the register value to
+		 * degrees centigrade temperature
+		 */
+		*val = pvt_calc_temp(pvt, nbs);
+
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct pvt_device *pvt = dev_get_drvdata(dev);
+	struct regmap *v_map = pvt->v_map;
+	u32 n, stat, pre_scaler;
+	u8 vm_idx, ch_idx;
+	int ret;
+
+	if (channel >= pvt->vm_channels.total)
+		return -EINVAL;
+
+	vm_idx = pvt->vd[channel].vm_map;
+	ch_idx = pvt->vd[channel].ch_map;
+
+	switch (attr) {
+	case hwmon_in_input:
+		ret = regmap_read_poll_timeout(v_map, VM_SDIF_DONE(vm_idx),
+					       stat, stat & SDIF_SMPL_DONE,
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx, ch_idx), &n);
+		if (ret < 0)
+			return ret;
+
+		n &= SAMPLE_DATA_MSK;
+		pre_scaler = pvt->vd[channel].pre_scaler;
+		/*
+		 * Convert the N bitstream count into voltage.
+		 * To support negative voltage calculation for 64bit machines
+		 * n must be cast to long, since n and *val differ both in
+		 * signedness and in size.
+		 * Division is used instead of right shift, because for signed
+		 * numbers, the sign bit is used to fill the vacated bit
+		 * positions, and if the number is negative, 1 is used.
+		 * BIT(x) may not be used instead of (1 << x) because it's
+		 * unsigned.
+		 */
+		*val = pre_scaler * (PVT_N_CONST * (long)n - PVT_R_CONST) /
+			(1 << PVT_CONV_BITS);
+
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int pvt_read(struct device *dev, enum hwmon_sensor_types type,
+		    u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return pvt_read_temp(dev, attr, channel, val);
+	case hwmon_in:
+		return pvt_read_in(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct hwmon_channel_info pvt_temp = {
+	.type = hwmon_temp,
+};
+
+static struct hwmon_channel_info pvt_in = {
+	.type = hwmon_in,
+};
+
+static const struct hwmon_ops pvt_hwmon_ops = {
+	.is_visible = pvt_is_visible,
+	.read = pvt_read,
+};
+
+static struct hwmon_chip_info pvt_chip_info = {
+	.ops = &pvt_hwmon_ops,
+};
+
+static int pvt_init(struct pvt_device *pvt)
+{
+	u16 sys_freq, key, middle, low = 4, high = 8;
+	struct regmap *t_map = pvt->t_map;
+	struct regmap *p_map = pvt->p_map;
+	struct regmap *v_map = pvt->v_map;
+	u32 t_num = pvt->t_num;
+	u32 p_num = pvt->p_num;
+	u32 v_num = pvt->v_num;
+	u32 clk_synth, val;
+	int ret;
+
+	sys_freq = clk_get_rate(pvt->clk) / HZ_PER_MHZ;
+	while (high >= low) {
+		middle = (low + high + 1) / 2;
+		key = DIV_ROUND_CLOSEST(sys_freq, middle);
+		if (key > CLK_SYS_CYCLES_MAX) {
+			low = middle + 1;
+			continue;
+		} else if (key < CLK_SYS_CYCLES_MIN) {
+			high = middle - 1;
+			continue;
+		} else {
+			break;
+		}
+	}
+
+	/*
+	 * The system supports 'clk_sys' to 'clk_ip' frequency ratios
+	 * from 2:1 to 512:1
+	 */
+	key = clamp_val(key, CLK_SYS_CYCLES_MIN, CLK_SYS_CYCLES_MAX) - 2;
+
+	clk_synth = ((key + 1) >> 1) << CLK_SYNTH_LO_SFT |
+		    (key >> 1) << CLK_SYNTH_HI_SFT |
+		    (key >> 1) << CLK_SYNTH_HOLD_SFT | CLK_SYNTH_EN;
+
+	pvt->ip_freq = clk_get_rate(pvt->clk) / (key + 2);
+
+	if (t_num) {
+		ret = regmap_write(t_map, SDIF_SMPL_CTRL, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(t_map, SDIF_HALT, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(t_map, CLK_SYNTH, clk_synth);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(t_map, SDIF_DISABLE, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = CFG0_MODE_2 | CFG0_PARALLEL_OUT | CFG0_12_BIT |
+		      IP_CFG << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(t_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = POWER_DELAY_CYCLE_256 | IP_TMR << SDIF_ADDR_SFT |
+			      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(t_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = IP_RST_REL | IP_RUN_CONT | IP_AUTO |
+		      IP_CTRL << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(t_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (p_num) {
+		ret = regmap_write(p_map, SDIF_HALT, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(p_map, SDIF_DISABLE, BIT(p_num) - 1);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(p_map, CLK_SYNTH, clk_synth);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (v_num) {
+		ret = regmap_write(v_map, SDIF_SMPL_CTRL, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(v_map, SDIF_HALT, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(v_map, CLK_SYNTH, clk_synth);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(v_map, SDIF_DISABLE, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = (BIT(pvt->vm_channels.max) - 1) | VM_CH_INIT |
+		      IP_POLL << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT |
+		      CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = POWER_DELAY_CYCLE_64 | IP_TMR << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		val = IP_RST_REL | IP_RUN_CONT | IP_AUTO | IP_VM_MODE |
+		      IP_CTRL << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct regmap_config pvt_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static int pvt_get_regmap(struct platform_device *pdev, char *reg_name,
+			  struct pvt_device *pvt)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap **reg_map;
+	void __iomem *io_base;
+
+	if (!strcmp(reg_name, "common"))
+		reg_map = &pvt->c_map;
+	else if (!strcmp(reg_name, "ts"))
+		reg_map = &pvt->t_map;
+	else if (!strcmp(reg_name, "pd"))
+		reg_map = &pvt->p_map;
+	else if (!strcmp(reg_name, "vm"))
+		reg_map = &pvt->v_map;
+	else
+		return -EINVAL;
+
+	io_base = devm_platform_ioremap_resource_byname(pdev, reg_name);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
+
+	pvt_regmap_config.name = reg_name;
+	*reg_map = devm_regmap_init_mmio(dev, io_base, &pvt_regmap_config);
+	if (IS_ERR(*reg_map)) {
+		dev_err(dev, "failed to init register map\n");
+		return PTR_ERR(*reg_map);
+	}
+
+	return 0;
+}
+
+static void pvt_reset_control_assert(void *data)
+{
+	struct pvt_device *pvt = data;
+
+	reset_control_assert(pvt->rst);
+}
+
+static int pvt_reset_control_deassert(struct device *dev, struct pvt_device *pvt)
+{
+	int ret;
+
+	ret = reset_control_deassert(pvt->rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, pvt_reset_control_assert, pvt);
+}
+
+static int pvt_get_active_channel(struct device *dev, struct pvt_device *pvt,
+				  u32 vm_num, u32 ch_num, u8 *vm_idx)
+{
+	u8 vm_active_ch[VM_NUM_MAX];
+	int ret, i, j, k;
+
+	ret = device_property_read_u8_array(dev, "moortec,vm-active-channels",
+					    vm_active_ch, vm_num);
+	if (ret) {
+		/*
+		 * Incase "moortec,vm-active-channels" property is not defined,
+		 * we assume each VM sensor has all of its channels active.
+		 */
+		memset(vm_active_ch, ch_num, vm_num);
+		pvt->vm_channels.max = ch_num;
+		pvt->vm_channels.total = ch_num * vm_num;
+	} else {
+		for (i = 0; i < vm_num; i++) {
+			if (vm_active_ch[i] > ch_num) {
+				dev_err(dev, "invalid active channels: %u\n",
+					vm_active_ch[i]);
+				return -EINVAL;
+			}
+
+			pvt->vm_channels.total += vm_active_ch[i];
+
+			if (vm_active_ch[i] > pvt->vm_channels.max)
+				pvt->vm_channels.max = vm_active_ch[i];
+		}
+	}
+
+	/*
+	 * Map between the channel-number to VM-index and channel-index.
+	 * Example - 3 VMs, "moortec,vm_active_ch" = <5 2 4>:
+	 * vm_map = [0 0 0 0 0 1 1 2 2 2 2]
+	 * ch_map = [0 1 2 3 4 0 1 0 1 2 3]
+	 */
+	pvt->vd = devm_kcalloc(dev, pvt->vm_channels.total, sizeof(*pvt->vd),
+			       GFP_KERNEL);
+	if (!pvt->vd)
+		return -ENOMEM;
+
+	k = 0;
+	for (i = 0; i < vm_num; i++) {
+		for (j = 0; j < vm_active_ch[i]; j++) {
+			pvt->vd[k].vm_map = vm_idx[i];
+			pvt->vd[k].ch_map = j;
+			k++;
+		}
+	}
+
+	return 0;
+}
+
+static int pvt_get_pre_scaler(struct device *dev, struct pvt_device *pvt)
+{
+	u8 *pre_scaler_ch_list;
+	int i, ret, num_ch;
+	u32 channel;
+
+	/* Set default pre-scaler value to be 1. */
+	for (i = 0; i < pvt->vm_channels.total; i++)
+		pvt->vd[i].pre_scaler = PRE_SCALER_X1;
+
+	/* Get number of channels configured in "moortec,vm-pre-scaler-x2". */
+	num_ch = device_property_count_u8(dev, "moortec,vm-pre-scaler-x2");
+	if (num_ch <= 0)
+		return 0;
+
+	pre_scaler_ch_list = kcalloc(num_ch, sizeof(*pre_scaler_ch_list),
+				     GFP_KERNEL);
+	if (!pre_scaler_ch_list)
+		return -ENOMEM;
+
+	/* Get list of all channels that have pre-scaler of 2. */
+	ret = device_property_read_u8_array(dev, "moortec,vm-pre-scaler-x2",
+					    pre_scaler_ch_list, num_ch);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < num_ch; i++) {
+		channel = pre_scaler_ch_list[i];
+		pvt->vd[channel].pre_scaler = PRE_SCALER_X2;
+	}
+
+out:
+	kfree(pre_scaler_ch_list);
+
+	return ret;
+}
+
+static int pvt_set_temp_coeff(struct device *dev, struct pvt_device *pvt)
+{
+	struct temp_coeff *ts_coeff = &pvt->ts_coeff;
+	u32 series;
+	int ret;
+
+	/* Incase ts-series property is not defined, use default 5. */
+	ret = device_property_read_u32(dev, "moortec,ts-series", &series);
+	if (ret)
+		series = TEMPERATURE_SENSOR_SERIES_5;
+
+	switch (series) {
+	case TEMPERATURE_SENSOR_SERIES_5:
+		ts_coeff->h = PVT_SERIES5_H_CONST;
+		ts_coeff->g = PVT_SERIES5_G_CONST;
+		ts_coeff->j = PVT_SERIES5_J_CONST;
+		ts_coeff->cal5 = PVT_SERIES5_CAL5_CONST;
+		break;
+	case TEMPERATURE_SENSOR_SERIES_6:
+		ts_coeff->h = PVT_SERIES6_H_CONST;
+		ts_coeff->g = PVT_SERIES6_G_CONST;
+		ts_coeff->j = PVT_SERIES6_J_CONST;
+		ts_coeff->cal5 = PVT_SERIES6_CAL5_CONST;
+		break;
+	default:
+		dev_err(dev, "invalid temperature sensor series (%u)\n",
+			series);
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "temperature sensor series = %u\n", series);
+
+	/* Override ts-coeff-h/g/j/cal5 if they are defined. */
+	device_property_read_u32(dev, "moortec,ts-coeff-h", &ts_coeff->h);
+	device_property_read_u32(dev, "moortec,ts-coeff-g", &ts_coeff->g);
+	device_property_read_u32(dev, "moortec,ts-coeff-j", &ts_coeff->j);
+	device_property_read_u32(dev, "moortec,ts-coeff-cal5", &ts_coeff->cal5);
+
+	dev_dbg(dev, "ts-coeff: h = %u, g = %u, j = %d, cal5 = %u\n",
+		ts_coeff->h, ts_coeff->g, ts_coeff->j, ts_coeff->cal5);
+
+	return 0;
+}
+
+static int mr75203_probe(struct platform_device *pdev)
+{
+	u32 ts_num, vm_num, pd_num, ch_num, val, index, i;
+	const struct hwmon_channel_info **pvt_info;
+	struct device *dev = &pdev->dev;
+	u32 *temp_config, *in_config;
+	struct device *hwmon_dev;
+	struct pvt_device *pvt;
+	int ret;
+
+	pvt = devm_kzalloc(dev, sizeof(*pvt), GFP_KERNEL);
+	if (!pvt)
+		return -ENOMEM;
+
+	ret = pvt_get_regmap(pdev, "common", pvt);
+	if (ret)
+		return ret;
+
+	pvt->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(pvt->clk))
+		return dev_err_probe(dev, PTR_ERR(pvt->clk), "failed to get clock\n");
+
+	pvt->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
+	if (IS_ERR(pvt->rst))
+		return dev_err_probe(dev, PTR_ERR(pvt->rst),
+				     "failed to get reset control\n");
+
+	if (pvt->rst) {
+		ret = pvt_reset_control_deassert(dev, pvt);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "cannot deassert reset control\n");
+	}
+
+	ret = regmap_read(pvt->c_map, PVT_IP_CONFIG, &val);
+	if (ret < 0)
+		return ret;
+
+	ts_num = (val & TS_NUM_MSK) >> TS_NUM_SFT;
+	pd_num = (val & PD_NUM_MSK) >> PD_NUM_SFT;
+	vm_num = (val & VM_NUM_MSK) >> VM_NUM_SFT;
+	ch_num = (val & CH_NUM_MSK) >> CH_NUM_SFT;
+	pvt->t_num = ts_num;
+	pvt->p_num = pd_num;
+	pvt->v_num = vm_num;
+	val = 0;
+	if (ts_num)
+		val++;
+	if (vm_num)
+		val++;
+	if (!val)
+		return -ENODEV;
+
+	pvt_info = devm_kcalloc(dev, val + 2, sizeof(*pvt_info), GFP_KERNEL);
+	if (!pvt_info)
+		return -ENOMEM;
+	pvt_info[0] = HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ);
+	index = 1;
+
+	if (ts_num) {
+		ret = pvt_get_regmap(pdev, "ts", pvt);
+		if (ret)
+			return ret;
+
+		ret = pvt_set_temp_coeff(dev, pvt);
+		if (ret)
+			return ret;
+
+		temp_config = devm_kcalloc(dev, ts_num + 1,
+					   sizeof(*temp_config), GFP_KERNEL);
+		if (!temp_config)
+			return -ENOMEM;
+
+		memset32(temp_config, HWMON_T_INPUT, ts_num);
+		pvt_temp.config = temp_config;
+		pvt_info[index++] = &pvt_temp;
+
+		pvt_ts_dbgfs_create(pvt, dev);
+	}
+
+	if (pd_num) {
+		ret = pvt_get_regmap(pdev, "pd", pvt);
+		if (ret)
+			return ret;
+	}
+
+	if (vm_num) {
+		u8 vm_idx[VM_NUM_MAX];
+
+		ret = pvt_get_regmap(pdev, "vm", pvt);
+		if (ret)
+			return ret;
+
+		ret = device_property_read_u8_array(dev, "intel,vm-map", vm_idx,
+						    vm_num);
+		if (ret) {
+			/*
+			 * Incase intel,vm-map property is not defined, we
+			 * assume incremental channel numbers.
+			 */
+			for (i = 0; i < vm_num; i++)
+				vm_idx[i] = i;
+		} else {
+			for (i = 0; i < vm_num; i++)
+				if (vm_idx[i] >= vm_num || vm_idx[i] == 0xff) {
+					pvt->v_num = i;
+					vm_num = i;
+					break;
+				}
+		}
+
+		ret = pvt_get_active_channel(dev, pvt, vm_num, ch_num, vm_idx);
+		if (ret)
+			return ret;
+
+		ret = pvt_get_pre_scaler(dev, pvt);
+		if (ret)
+			return ret;
+
+		in_config = devm_kcalloc(dev, pvt->vm_channels.total + 1,
+					 sizeof(*in_config), GFP_KERNEL);
+		if (!in_config)
+			return -ENOMEM;
+
+		memset32(in_config, HWMON_I_INPUT, pvt->vm_channels.total);
+		in_config[pvt->vm_channels.total] = 0;
+		pvt_in.config = in_config;
+
+		pvt_info[index++] = &pvt_in;
+	}
+
+	ret = pvt_init(pvt);
+	if (ret) {
+		dev_err(dev, "failed to init pvt: %d\n", ret);
+		return ret;
+	}
+
+	pvt_chip_info.info = pvt_info;
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "pvt",
+							 pvt,
+							 &pvt_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id moortec_pvt_of_match[] = {
+	{ .compatible = "moortec,mr75203" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, moortec_pvt_of_match);
+
+static struct platform_driver moortec_pvt_driver = {
+	.driver = {
+		.name = "moortec-pvt",
+		.of_match_table = moortec_pvt_of_match,
+	},
+	.probe = mr75203_probe,
+};
+module_platform_driver(moortec_pvt_driver);
+
+MODULE_LICENSE("GPL v2");