Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/hwmon/sht4x.c b/drivers/hwmon/sht4x.c
new file mode 100644
index 0000000000..7ee7974104
--- /dev/null
+++ b/drivers/hwmon/sht4x.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (c) Linumiz 2021
+ *
+ * sht4x.c - Linux hwmon driver for SHT4x Temperature and Humidity sensor
+ *
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+
+/*
+ * Poll intervals (in milliseconds)
+ */
+#define SHT4X_MIN_POLL_INTERVAL	2000
+
+/*
+ * I2C command delays (in microseconds)
+ */
+#define SHT4X_MEAS_DELAY_HPM	8200	/* see t_MEAS,h in datasheet */
+#define SHT4X_DELAY_EXTRA	10000
+
+/*
+ * Command Bytes
+ */
+#define SHT4X_CMD_MEASURE_HPM	0b11111101
+#define SHT4X_CMD_RESET		0b10010100
+
+#define SHT4X_CMD_LEN		1
+#define SHT4X_CRC8_LEN		1
+#define SHT4X_WORD_LEN		2
+#define SHT4X_RESPONSE_LENGTH	6
+#define SHT4X_CRC8_POLYNOMIAL	0x31
+#define SHT4X_CRC8_INIT		0xff
+#define SHT4X_MIN_TEMPERATURE	-45000
+#define SHT4X_MAX_TEMPERATURE	125000
+#define SHT4X_MIN_HUMIDITY	0
+#define SHT4X_MAX_HUMIDITY	100000
+
+DECLARE_CRC8_TABLE(sht4x_crc8_table);
+
+/**
+ * struct sht4x_data - All the data required to operate an SHT4X chip
+ * @client: the i2c client associated with the SHT4X
+ * @lock: a mutex that is used to prevent parallel access to the i2c client
+ * @update_interval: the minimum poll interval
+ * @last_updated: the previous time that the SHT4X was polled
+ * @temperature: the latest temperature value received from the SHT4X
+ * @humidity: the latest humidity value received from the SHT4X
+ */
+struct sht4x_data {
+	struct i2c_client	*client;
+	struct mutex		lock;	/* atomic read data updates */
+	bool			valid;	/* validity of fields below */
+	long			update_interval;	/* in milli-seconds */
+	long			last_updated;	/* in jiffies */
+	s32			temperature;
+	s32			humidity;
+};
+
+/**
+ * sht4x_read_values() - read and parse the raw data from the SHT4X
+ * @sht4x_data: the struct sht4x_data to use for the lock
+ * Return: 0 if successful, -ERRNO if not
+ */
+static int sht4x_read_values(struct sht4x_data *data)
+{
+	int ret = 0;
+	u16 t_ticks, rh_ticks;
+	unsigned long next_update;
+	struct i2c_client *client = data->client;
+	u8 crc;
+	u8 cmd[SHT4X_CMD_LEN] = {SHT4X_CMD_MEASURE_HPM};
+	u8 raw_data[SHT4X_RESPONSE_LENGTH];
+
+	mutex_lock(&data->lock);
+	next_update = data->last_updated +
+		      msecs_to_jiffies(data->update_interval);
+
+	if (data->valid && time_before_eq(jiffies, next_update))
+		goto unlock;
+
+	ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
+	if (ret < 0)
+		goto unlock;
+
+	usleep_range(SHT4X_MEAS_DELAY_HPM, SHT4X_MEAS_DELAY_HPM + SHT4X_DELAY_EXTRA);
+
+	ret = i2c_master_recv(client, raw_data, SHT4X_RESPONSE_LENGTH);
+	if (ret != SHT4X_RESPONSE_LENGTH) {
+		if (ret >= 0)
+			ret = -ENODATA;
+		goto unlock;
+	}
+
+	t_ticks = raw_data[0] << 8 | raw_data[1];
+	rh_ticks = raw_data[3] << 8 | raw_data[4];
+
+	crc = crc8(sht4x_crc8_table, &raw_data[0], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+	if (crc != raw_data[2]) {
+		dev_err(&client->dev, "data integrity check failed\n");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	crc = crc8(sht4x_crc8_table, &raw_data[3], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+	if (crc != raw_data[5]) {
+		dev_err(&client->dev, "data integrity check failed\n");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	data->temperature = ((21875 * (int32_t)t_ticks) >> 13) - 45000;
+	data->humidity = ((15625 * (int32_t)rh_ticks) >> 13) - 6000;
+	data->last_updated = jiffies;
+	data->valid = true;
+	ret = 0;
+
+unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static ssize_t sht4x_interval_write(struct sht4x_data *data, long val)
+{
+	data->update_interval = clamp_val(val, SHT4X_MIN_POLL_INTERVAL, INT_MAX);
+
+	return 0;
+}
+
+/* sht4x_interval_read() - read the minimum poll interval in milliseconds */
+static size_t sht4x_interval_read(struct sht4x_data *data, long *val)
+{
+	*val = data->update_interval;
+	return 0;
+}
+
+/* sht4x_temperature1_read() - read the temperature in millidegrees */
+static int sht4x_temperature1_read(struct sht4x_data *data, long *val)
+{
+	int ret;
+
+	ret = sht4x_read_values(data);
+	if (ret < 0)
+		return ret;
+
+	*val = data->temperature;
+
+	return 0;
+}
+
+/* sht4x_humidity1_read() - read a relative humidity in millipercent */
+static int sht4x_humidity1_read(struct sht4x_data *data, long *val)
+{
+	int ret;
+
+	ret = sht4x_read_values(data);
+	if (ret < 0)
+		return ret;
+
+	*val = data->humidity;
+
+	return 0;
+}
+
+static umode_t sht4x_hwmon_visible(const void *data,
+				   enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+	case hwmon_humidity:
+		return 0444;
+	case hwmon_chip:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int sht4x_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			    u32 attr, int channel, long *val)
+{
+	struct sht4x_data *data = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_temp:
+		return sht4x_temperature1_read(data, val);
+	case hwmon_humidity:
+		return sht4x_humidity1_read(data, val);
+	case hwmon_chip:
+		return sht4x_interval_read(data, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int sht4x_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			     u32 attr, int channel, long val)
+{
+	struct sht4x_data *data = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_chip:
+		return sht4x_interval_write(data, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_channel_info * const sht4x_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT),
+	NULL,
+};
+
+static const struct hwmon_ops sht4x_hwmon_ops = {
+	.is_visible = sht4x_hwmon_visible,
+	.read = sht4x_hwmon_read,
+	.write = sht4x_hwmon_write,
+};
+
+static const struct hwmon_chip_info sht4x_chip_info = {
+	.ops = &sht4x_hwmon_ops,
+	.info = sht4x_info,
+};
+
+static int sht4x_probe(struct i2c_client *client)
+{
+	struct device *device = &client->dev;
+	struct device *hwmon_dev;
+	struct sht4x_data *data;
+	u8 cmd[] = {SHT4X_CMD_RESET};
+	int ret;
+
+	/*
+	 * we require full i2c support since the sht4x uses multi-byte read and
+	 * writes as well as multi-byte commands which are not supported by
+	 * the smbus protocol
+	 */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	data = devm_kzalloc(device, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->update_interval = SHT4X_MIN_POLL_INTERVAL;
+	data->client = client;
+
+	mutex_init(&data->lock);
+
+	crc8_populate_msb(sht4x_crc8_table, SHT4X_CRC8_POLYNOMIAL);
+
+	ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
+	if (ret < 0)
+		return ret;
+	if (ret != SHT4X_CMD_LEN)
+		return -EIO;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(device,
+							 client->name,
+							 data,
+							 &sht4x_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id sht4x_id[] = {
+	{ "sht4x", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sht4x_id);
+
+static const struct of_device_id sht4x_of_match[] = {
+	{ .compatible = "sensirion,sht4x" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sht4x_of_match);
+
+static struct i2c_driver sht4x_driver = {
+	.driver = {
+		.name = "sht4x",
+		.of_match_table = sht4x_of_match,
+	},
+	.probe		= sht4x_probe,
+	.id_table	= sht4x_id,
+};
+
+module_i2c_driver(sht4x_driver);
+
+MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>");
+MODULE_DESCRIPTION("Sensirion SHT4x humidity and temperature sensor driver");
+MODULE_LICENSE("GPL v2");