Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2271 insertions, 0 deletions

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
new file mode 100644
index 0000000000..c446e00db6
--- /dev/null
+++ b/drivers/hwmon/w83795.c
@@ -0,0 +1,2271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  w83795.c - Linux kernel driver for hardware monitoring
+ *  Copyright (C) 2008 Nuvoton Technology Corp.
+ *                Wei Song
+ *  Copyright (C) 2010 Jean Delvare <jdelvare@suse.de>
+ *
+ *  Supports following chips:
+ *
+ *  Chip       #vin   #fanin #pwm #temp #dts wchipid  vendid  i2c  ISA
+ *  w83795g     21     14     8     6     8    0x79   0x5ca3  yes   no
+ *  w83795adg   18     14     2     6     8    0x79   0x5ca3  yes   no
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/util_macros.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+	0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
+};
+
+
+static bool reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+
+#define W83795_REG_BANKSEL		0x00
+#define W83795_REG_VENDORID		0xfd
+#define W83795_REG_CHIPID		0xfe
+#define W83795_REG_DEVICEID		0xfb
+#define W83795_REG_DEVICEID_A		0xff
+
+#define W83795_REG_I2C_ADDR		0xfc
+#define W83795_REG_CONFIG		0x01
+#define W83795_REG_CONFIG_CONFIG48	0x04
+#define W83795_REG_CONFIG_START	0x01
+
+/* Multi-Function Pin Ctrl Registers */
+#define W83795_REG_VOLT_CTRL1		0x02
+#define W83795_REG_VOLT_CTRL2		0x03
+#define W83795_REG_TEMP_CTRL1		0x04
+#define W83795_REG_TEMP_CTRL2		0x05
+#define W83795_REG_FANIN_CTRL1		0x06
+#define W83795_REG_FANIN_CTRL2		0x07
+#define W83795_REG_VMIGB_CTRL		0x08
+
+#define TEMP_READ			0
+#define TEMP_CRIT			1
+#define TEMP_CRIT_HYST			2
+#define TEMP_WARN			3
+#define TEMP_WARN_HYST			4
+/*
+ * only crit and crit_hyst affect real-time alarm status
+ * current crit crit_hyst warn warn_hyst
+ */
+static const u16 W83795_REG_TEMP[][5] = {
+	{0x21, 0x96, 0x97, 0x98, 0x99},	/* TD1/TR1 */
+	{0x22, 0x9a, 0x9b, 0x9c, 0x9d},	/* TD2/TR2 */
+	{0x23, 0x9e, 0x9f, 0xa0, 0xa1},	/* TD3/TR3 */
+	{0x24, 0xa2, 0xa3, 0xa4, 0xa5},	/* TD4/TR4 */
+	{0x1f, 0xa6, 0xa7, 0xa8, 0xa9},	/* TR5 */
+	{0x20, 0xaa, 0xab, 0xac, 0xad},	/* TR6 */
+};
+
+#define IN_READ				0
+#define IN_MAX				1
+#define IN_LOW				2
+static const u16 W83795_REG_IN[][3] = {
+	/* Current, HL, LL */
+	{0x10, 0x70, 0x71},	/* VSEN1 */
+	{0x11, 0x72, 0x73},	/* VSEN2 */
+	{0x12, 0x74, 0x75},	/* VSEN3 */
+	{0x13, 0x76, 0x77},	/* VSEN4 */
+	{0x14, 0x78, 0x79},	/* VSEN5 */
+	{0x15, 0x7a, 0x7b},	/* VSEN6 */
+	{0x16, 0x7c, 0x7d},	/* VSEN7 */
+	{0x17, 0x7e, 0x7f},	/* VSEN8 */
+	{0x18, 0x80, 0x81},	/* VSEN9 */
+	{0x19, 0x82, 0x83},	/* VSEN10 */
+	{0x1A, 0x84, 0x85},	/* VSEN11 */
+	{0x1B, 0x86, 0x87},	/* VTT */
+	{0x1C, 0x88, 0x89},	/* 3VDD */
+	{0x1D, 0x8a, 0x8b},	/* 3VSB */
+	{0x1E, 0x8c, 0x8d},	/* VBAT */
+	{0x1F, 0xa6, 0xa7},	/* VSEN12 */
+	{0x20, 0xaa, 0xab},	/* VSEN13 */
+	{0x21, 0x96, 0x97},	/* VSEN14 */
+	{0x22, 0x9a, 0x9b},	/* VSEN15 */
+	{0x23, 0x9e, 0x9f},	/* VSEN16 */
+	{0x24, 0xa2, 0xa3},	/* VSEN17 */
+};
+#define W83795_REG_VRLSB		0x3C
+
+static const u8 W83795_REG_IN_HL_LSB[] = {
+	0x8e,	/* VSEN1-4 */
+	0x90,	/* VSEN5-8 */
+	0x92,	/* VSEN9-11 */
+	0x94,	/* VTT, 3VDD, 3VSB, 3VBAT */
+	0xa8,	/* VSEN12 */
+	0xac,	/* VSEN13 */
+	0x98,	/* VSEN14 */
+	0x9c,	/* VSEN15 */
+	0xa0,	/* VSEN16 */
+	0xa4,	/* VSEN17 */
+};
+
+#define IN_LSB_REG(index, type) \
+	(((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \
+	: (W83795_REG_IN_HL_LSB[(index)] + 1))
+
+#define IN_LSB_SHIFT			0
+#define IN_LSB_IDX			1
+static const u8 IN_LSB_SHIFT_IDX[][2] = {
+	/* High/Low LSB shift, LSB No. */
+	{0x00, 0x00},	/* VSEN1 */
+	{0x02, 0x00},	/* VSEN2 */
+	{0x04, 0x00},	/* VSEN3 */
+	{0x06, 0x00},	/* VSEN4 */
+	{0x00, 0x01},	/* VSEN5 */
+	{0x02, 0x01},	/* VSEN6 */
+	{0x04, 0x01},	/* VSEN7 */
+	{0x06, 0x01},	/* VSEN8 */
+	{0x00, 0x02},	/* VSEN9 */
+	{0x02, 0x02},	/* VSEN10 */
+	{0x04, 0x02},	/* VSEN11 */
+	{0x00, 0x03},	/* VTT */
+	{0x02, 0x03},	/* 3VDD */
+	{0x04, 0x03},	/* 3VSB	*/
+	{0x06, 0x03},	/* VBAT	*/
+	{0x06, 0x04},	/* VSEN12 */
+	{0x06, 0x05},	/* VSEN13 */
+	{0x06, 0x06},	/* VSEN14 */
+	{0x06, 0x07},	/* VSEN15 */
+	{0x06, 0x08},	/* VSEN16 */
+	{0x06, 0x09},	/* VSEN17 */
+};
+
+
+#define W83795_REG_FAN(index)		(0x2E + (index))
+#define W83795_REG_FAN_MIN_HL(index)	(0xB6 + (index))
+#define W83795_REG_FAN_MIN_LSB(index)	(0xC4 + (index) / 2)
+#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \
+	(((index) & 1) ? 4 : 0)
+
+#define W83795_REG_VID_CTRL		0x6A
+
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
+#define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_BEEP(index)		(0x50 + (index))
+
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
+
+
+#define W83795_REG_FCMS1		0x201
+#define W83795_REG_FCMS2		0x208
+#define W83795_REG_TFMR(index)		(0x202 + (index))
+#define W83795_REG_FOMC			0x20F
+
+#define W83795_REG_TSS(index)		(0x209 + (index))
+
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
+#define PWM_OUTPUT			0
+#define PWM_FREQ			1
+#define PWM_START			2
+#define PWM_NONSTOP			3
+#define PWM_STOP_TIME			4
+#define W83795_REG_PWM(index, nr)	(0x210 + (nr) * 8 + (index))
+
+#define W83795_REG_FTSH(index)		(0x240 + (index) * 2)
+#define W83795_REG_FTSL(index)		(0x241 + (index) * 2)
+#define W83795_REG_TFTS			0x250
+
+#define TEMP_PWM_TTTI			0
+#define TEMP_PWM_CTFS			1
+#define TEMP_PWM_HCT			2
+#define TEMP_PWM_HOT			3
+#define W83795_REG_TTTI(index)		(0x260 + (index))
+#define W83795_REG_CTFS(index)		(0x268 + (index))
+#define W83795_REG_HT(index)		(0x270 + (index))
+
+#define SF4_TEMP			0
+#define SF4_PWM				1
+#define W83795_REG_SF4_TEMP(temp_num, index) \
+	(0x280 + 0x10 * (temp_num) + (index))
+#define W83795_REG_SF4_PWM(temp_num, index) \
+	(0x288 + 0x10 * (temp_num) + (index))
+
+#define W83795_REG_DTSC			0x301
+#define W83795_REG_DTSE			0x302
+#define W83795_REG_DTS(index)		(0x26 + (index))
+#define W83795_REG_PECI_TBASE(index)	(0x320 + (index))
+
+#define DTS_CRIT			0
+#define DTS_CRIT_HYST			1
+#define DTS_WARN			2
+#define DTS_WARN_HYST			3
+#define W83795_REG_DTS_EXT(index)	(0xB2 + (index))
+
+#define SETUP_PWM_DEFAULT		0
+#define SETUP_PWM_UPTIME		1
+#define SETUP_PWM_DOWNTIME		2
+#define W83795_REG_SETUP_PWM(index)    (0x20C + (index))
+
+static inline u16 in_from_reg(u8 index, u16 val)
+{
+	/* 3VDD, 3VSB and VBAT: 6 mV/bit; other inputs: 2 mV/bit */
+	if (index >= 12 && index <= 14)
+		return val * 6;
+	else
+		return val * 2;
+}
+
+static inline u16 in_to_reg(u8 index, u16 val)
+{
+	if (index >= 12 && index <= 14)
+		return val / 6;
+	else
+		return val / 2;
+}
+
+static inline unsigned long fan_from_reg(u16 val)
+{
+	if ((val == 0xfff) || (val == 0))
+		return 0;
+	return 1350000UL / val;
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+	if (rpm <= 0)
+		return 0x0fff;
+	return clamp_val((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long time_from_reg(u8 reg)
+{
+	return reg * 100;
+}
+
+static inline u8 time_to_reg(unsigned long val)
+{
+	return clamp_val((val + 50) / 100, 0, 0xff);
+}
+
+static inline long temp_from_reg(s8 reg)
+{
+	return reg * 1000;
+}
+
+static inline s8 temp_to_reg(long val, s8 min, s8 max)
+{
+	return clamp_val(val / 1000, min, max);
+}
+
+static const u16 pwm_freq_cksel0[16] = {
+	1024, 512, 341, 256, 205, 171, 146, 128,
+	85, 64, 32, 16, 8, 4, 2, 1
+};
+
+static unsigned int pwm_freq_from_reg(u8 reg, u16 clkin)
+{
+	unsigned long base_clock;
+
+	if (reg & 0x80) {
+		base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+		return base_clock / ((reg & 0x7f) + 1);
+	} else
+		return pwm_freq_cksel0[reg & 0x0f];
+}
+
+static u8 pwm_freq_to_reg(unsigned long val, u16 clkin)
+{
+	unsigned long base_clock;
+	u8 reg0, reg1;
+	unsigned long best0, best1;
+
+	/* Best fit for cksel = 0 */
+	reg0 = find_closest_descending(val, pwm_freq_cksel0,
+				       ARRAY_SIZE(pwm_freq_cksel0));
+	if (val < 375)	/* cksel = 1 can't beat this */
+		return reg0;
+	best0 = pwm_freq_cksel0[reg0];
+
+	/* Best fit for cksel = 1 */
+	base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+	reg1 = clamp_val(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
+	best1 = base_clock / reg1;
+	reg1 = 0x80 | (reg1 - 1);
+
+	/* Choose the closest one */
+	if (abs(val - best0) > abs(val - best1))
+		return reg1;
+	else
+		return reg0;
+}
+
+enum chip_types {w83795g, w83795adg};
+
+struct w83795_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	unsigned long last_updated;	/* In jiffies */
+	enum chip_types chip_type;
+
+	u8 bank;
+
+	u32 has_in;		/* Enable monitor VIN or not */
+	u8 has_dyn_in;		/* Only in2-0 can have this */
+	u16 in[21][3];		/* Register value, read/high/low */
+	u8 in_lsb[10][3];	/* LSB Register value, high/low */
+	u8 has_gain;		/* has gain: in17-20 * 8 */
+
+	u16 has_fan;		/* Enable fan14-1 or not */
+	u16 fan[14];		/* Register value combine */
+	u16 fan_min[14];	/* Register value combine */
+
+	u8 has_temp;		/* Enable monitor temp6-1 or not */
+	s8 temp[6][5];		/* current, crit, crit_hyst, warn, warn_hyst */
+	u8 temp_read_vrlsb[6];
+	u8 temp_mode;		/* Bit vector, 0 = TR, 1 = TD */
+	u8 temp_src[3];		/* Register value */
+
+	u8 enable_dts;		/*
+				 * Enable PECI and SB-TSI,
+				 * bit 0: =1 enable, =0 disable,
+				 * bit 1: =1 AMD SB-TSI, =0 Intel PECI
+				 */
+	u8 has_dts;		/* Enable monitor DTS temp */
+	s8 dts[8];		/* Register value */
+	u8 dts_read_vrlsb[8];	/* Register value */
+	s8 dts_ext[4];		/* Register value */
+
+	u8 has_pwm;		/*
+				 * 795g supports 8 pwm, 795adg only supports 2,
+				 * no config register, only affected by chip
+				 * type
+				 */
+	u8 pwm[8][5];		/*
+				 * Register value, output, freq, start,
+				 *  non stop, stop time
+				 */
+	u16 clkin;		/* CLKIN frequency in kHz */
+	u8 pwm_fcms[2];		/* Register value */
+	u8 pwm_tfmr[6];		/* Register value */
+	u8 pwm_fomc;		/* Register value */
+
+	u16 target_speed[8];	/*
+				 * Register value, target speed for speed
+				 * cruise
+				 */
+	u8 tol_speed;		/* tolerance of target speed */
+	u8 pwm_temp[6][4];	/* TTTI, CTFS, HCT, HOT */
+	u8 sf4_reg[6][2][7];	/* 6 temp, temp/dcpwm, 7 registers */
+
+	u8 setup_pwm[3];	/* Register value */
+
+	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
+	u8 beeps[6];		/* Register value */
+
+	bool valid;
+	char valid_limits;
+	char valid_pwm_config;
+};
+
+/*
+ * Hardware access
+ * We assume that nobdody can change the bank outside the driver.
+ */
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_set_bank(struct i2c_client *client, u8 bank)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int err;
+
+	/* If the same bank is already set, nothing to do */
+	if ((data->bank & 0x07) == bank)
+		return 0;
+
+	/* Change to new bank, preserve all other bits */
+	bank |= data->bank & ~0x07;
+	err = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to set bank to %d, err %d\n",
+			(int)bank, err);
+		return err;
+	}
+	data->bank = bank;
+
+	return 0;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static u8 w83795_read(struct i2c_client *client, u16 reg)
+{
+	int err;
+
+	err = w83795_set_bank(client, reg >> 8);
+	if (err < 0)
+		return 0x00;	/* Arbitrary */
+
+	err = i2c_smbus_read_byte_data(client, reg & 0xff);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to read from register 0x%03x, err %d\n",
+			(int)reg, err);
+		return 0x00;	/* Arbitrary */
+	}
+	return err;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_write(struct i2c_client *client, u16 reg, u8 value)
+{
+	int err;
+
+	err = w83795_set_bank(client, reg >> 8);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+	if (err < 0)
+		dev_err(&client->dev,
+			"Failed to write to register 0x%03x, err %d\n",
+			(int)reg, err);
+	return err;
+}
+
+static void w83795_update_limits(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int i, limit;
+	u8 lsb;
+
+	/* Read the voltage limits */
+	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		data->in[i][IN_MAX] =
+			w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+		data->in[i][IN_LOW] =
+			w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+	}
+	for (i = 0; i < ARRAY_SIZE(data->in_lsb); i++) {
+		if ((i == 2 && data->chip_type == w83795adg) ||
+		    (i >= 4 && !(data->has_in & (1 << (i + 11)))))
+			continue;
+		data->in_lsb[i][IN_MAX] =
+			w83795_read(client, IN_LSB_REG(i, IN_MAX));
+		data->in_lsb[i][IN_LOW] =
+			w83795_read(client, IN_LSB_REG(i, IN_LOW));
+	}
+
+	/* Read the fan limits */
+	lsb = 0; /* Silent false gcc warning */
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		/*
+		 * Each register contains LSB for 2 fans, but we want to
+		 * read it only once to save time
+		 */
+		if ((i & 1) == 0 && (data->has_fan & (3 << i)))
+			lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
+
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		data->fan_min[i] =
+			w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
+		data->fan_min[i] |=
+			(lsb >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
+	}
+
+	/* Read the temperature limits */
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
+		for (limit = TEMP_CRIT; limit <= TEMP_WARN_HYST; limit++)
+			data->temp[i][limit] =
+				w83795_read(client, W83795_REG_TEMP[i][limit]);
+	}
+
+	/* Read the DTS limits */
+	if (data->enable_dts) {
+		for (limit = DTS_CRIT; limit <= DTS_WARN_HYST; limit++)
+			data->dts_ext[limit] =
+				w83795_read(client, W83795_REG_DTS_EXT(limit));
+	}
+
+	/* Read beep settings */
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
+
+	data->valid_limits = 1;
+}
+
+static struct w83795_data *w83795_update_pwm_config(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int i, tmp;
+
+	mutex_lock(&data->update_lock);
+
+	if (data->valid_pwm_config)
+		goto END;
+
+	/* Read temperature source selection */
+	for (i = 0; i < ARRAY_SIZE(data->temp_src); i++)
+		data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i));
+
+	/* Read automatic fan speed control settings */
+	data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1);
+	data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2);
+	for (i = 0; i < ARRAY_SIZE(data->pwm_tfmr); i++)
+		data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i));
+	data->pwm_fomc = w83795_read(client, W83795_REG_FOMC);
+	for (i = 0; i < data->has_pwm; i++) {
+		for (tmp = PWM_FREQ; tmp <= PWM_STOP_TIME; tmp++)
+			data->pwm[i][tmp] =
+				w83795_read(client, W83795_REG_PWM(i, tmp));
+	}
+	for (i = 0; i < ARRAY_SIZE(data->target_speed); i++) {
+		data->target_speed[i] =
+			w83795_read(client, W83795_REG_FTSH(i)) << 4;
+		data->target_speed[i] |=
+			w83795_read(client, W83795_REG_FTSL(i)) >> 4;
+	}
+	data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f;
+
+	for (i = 0; i < ARRAY_SIZE(data->pwm_temp); i++) {
+		data->pwm_temp[i][TEMP_PWM_TTTI] =
+			w83795_read(client, W83795_REG_TTTI(i)) & 0x7f;
+		data->pwm_temp[i][TEMP_PWM_CTFS] =
+			w83795_read(client, W83795_REG_CTFS(i));
+		tmp = w83795_read(client, W83795_REG_HT(i));
+		data->pwm_temp[i][TEMP_PWM_HCT] = tmp >> 4;
+		data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f;
+	}
+
+	/* Read SmartFanIV trip points */
+	for (i = 0; i < ARRAY_SIZE(data->sf4_reg); i++) {
+		for (tmp = 0; tmp < 7; tmp++) {
+			data->sf4_reg[i][SF4_TEMP][tmp] =
+				w83795_read(client,
+					    W83795_REG_SF4_TEMP(i, tmp));
+			data->sf4_reg[i][SF4_PWM][tmp] =
+				w83795_read(client, W83795_REG_SF4_PWM(i, tmp));
+		}
+	}
+
+	/* Read setup PWM */
+	for (i = 0; i < ARRAY_SIZE(data->setup_pwm); i++)
+		data->setup_pwm[i] =
+			w83795_read(client, W83795_REG_SETUP_PWM(i));
+
+	data->valid_pwm_config = 1;
+
+END:
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+static struct w83795_data *w83795_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	u16 tmp;
+	u8 intrusion;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (!data->valid_limits)
+		w83795_update_limits(client);
+
+	if (!(time_after(jiffies, data->last_updated + HZ * 2)
+	      || !data->valid))
+		goto END;
+
+	/* Update the voltages value */
+	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
+		tmp |= w83795_read(client, W83795_REG_VRLSB) >> 6;
+		data->in[i][IN_READ] = tmp;
+	}
+
+	/* in0-2 can have dynamic limits (W83795G only) */
+	if (data->has_dyn_in) {
+		u8 lsb_max = w83795_read(client, IN_LSB_REG(0, IN_MAX));
+		u8 lsb_low = w83795_read(client, IN_LSB_REG(0, IN_LOW));
+
+		for (i = 0; i < 3; i++) {
+			if (!(data->has_dyn_in & (1 << i)))
+				continue;
+			data->in[i][IN_MAX] =
+				w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+			data->in[i][IN_LOW] =
+				w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+			data->in_lsb[i][IN_MAX] = (lsb_max >> (2 * i)) & 0x03;
+			data->in_lsb[i][IN_LOW] = (lsb_low >> (2 * i)) & 0x03;
+		}
+	}
+
+	/* Update fan */
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
+		data->fan[i] |= w83795_read(client, W83795_REG_VRLSB) >> 4;
+	}
+
+	/* Update temperature */
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		data->temp[i][TEMP_READ] =
+			w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
+		data->temp_read_vrlsb[i] =
+			w83795_read(client, W83795_REG_VRLSB);
+	}
+
+	/* Update dts temperature */
+	if (data->enable_dts) {
+		for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			data->dts[i] =
+				w83795_read(client, W83795_REG_DTS(i));
+			data->dts_read_vrlsb[i] =
+				w83795_read(client, W83795_REG_VRLSB);
+		}
+	}
+
+	/* Update pwm output */
+	for (i = 0; i < data->has_pwm; i++) {
+		data->pwm[i][PWM_OUTPUT] =
+		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
+	}
+
+	/*
+	 * Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily.
+	 */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
+	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+
+	data->last_updated = jiffies;
+	data->valid = true;
+
+END:
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+/*
+ * Sysfs attributes
+ */
+
+#define ALARM_STATUS      0
+#define BEEP_ENABLE       1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index >> 3;
+	int bit = sensor_attr->index & 0x07;
+	u8 val;
+
+	if (nr == ALARM_STATUS)
+		val = (data->alarms[index] >> bit) & 1;
+	else		/* BEEP_ENABLE */
+		val = (data->beeps[index] >> bit) & 1;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index >> 3;
+	int shift = sensor_attr->index & 0x07;
+	u8 beep_bit = 1 << shift;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index));
+	data->beeps[index] &= ~beep_bit;
+	data->beeps[index] |= val << shift;
+	w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+		    struct device_attribute *attr, const char *buf,
+		    size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0 || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
+	val |= 0x80;
+	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = false;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+#define FAN_INPUT     0
+#define FAN_MIN       1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	u16 val;
+
+	if (nr == FAN_INPUT)
+		val = data->fan[index] & 0x0fff;
+	else
+		val = data->fan_min[index] & 0x0fff;
+
+	return sprintf(buf, "%lu\n", fan_from_reg(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val))
+		return -EINVAL;
+	val = fan_to_reg(val);
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[index] = val;
+	w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff);
+	val &= 0x0f;
+	if (index & 1) {
+		val <<= 4;
+		val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+		       & 0x0f;
+	} else {
+		val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+		       & 0xf0;
+	}
+	w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data;
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned int val;
+
+	data = nr == PWM_OUTPUT ? w83795_update_device(dev)
+				: w83795_update_pwm_config(dev);
+
+	switch (nr) {
+	case PWM_STOP_TIME:
+		val = time_from_reg(data->pwm[index][nr]);
+		break;
+	case PWM_FREQ:
+		val = pwm_freq_from_reg(data->pwm[index][nr], data->clkin);
+		break;
+	default:
+		val = data->pwm[index][nr];
+		break;
+	}
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case PWM_STOP_TIME:
+		val = time_to_reg(val);
+		break;
+	case PWM_FREQ:
+		val = pwm_freq_to_reg(val, data->clkin);
+		break;
+	default:
+		val = clamp_val(val, 0, 0xff);
+		break;
+	}
+	w83795_write(client, W83795_REG_PWM(index, nr), val);
+	data->pwm[index][nr] = val;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = sensor_attr->index;
+	u8 tmp;
+
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
+		tmp = 2;
+		goto out;
+	}
+	/* Thermal cruise or SmartFan IV mode */
+	for (tmp = 0; tmp < 6; tmp++) {
+		if (data->pwm_tfmr[tmp] & (1 << index)) {
+			tmp = 3;
+			goto out;
+		}
+	}
+	/* Manual mode */
+	tmp = 1;
+
+out:
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	unsigned long val;
+	int i;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val < 1 || val > 2)
+		return -EINVAL;
+
+#ifndef CONFIG_SENSORS_W83795_FANCTRL
+	if (val > 1) {
+		dev_warn(dev, "Automatic fan speed control support disabled\n");
+		dev_warn(dev, "Build with CONFIG_SENSORS_W83795_FANCTRL=y if you want it\n");
+		return -EOPNOTSUPP;
+	}
+#endif
+
+	mutex_lock(&data->update_lock);
+	switch (val) {
+	case 1:
+		/* Clear speed cruise mode bits */
+		data->pwm_fcms[0] &= ~(1 << index);
+		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
+		for (i = 0; i < 6; i++) {
+			data->pwm_tfmr[i] &= ~(1 << index);
+			w83795_write(client, W83795_REG_TFMR(i),
+				data->pwm_tfmr[i]);
+		}
+		break;
+	case 2:
+		data->pwm_fcms[0] |= (1 << index);
+		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		break;
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
+static ssize_t
+show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = sensor_attr->index;
+	u8 tmp = data->temp_src[index / 2];
+
+	if (index & 1)
+		tmp >>= 4;	/* Pick high nibble */
+	else
+		tmp &= 0x0f;	/* Pick low nibble */
+
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
+}
+
+static ssize_t
+store_temp_src(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	int tmp;
+	unsigned long channel;
+	u8 val = index / 2;
+
+	if (kstrtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	if (index & 1) {
+		tmp <<= 4;
+		data->temp_src[val] &= 0x0f;
+	} else {
+		data->temp_src[val] &= 0xf0;
+	}
+	data->temp_src[val] |= tmp;
+	w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+#define TEMP_PWM_ENABLE   0
+#define TEMP_PWM_FAN_MAP  1
+static ssize_t
+show_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u8 tmp = 0xff;
+
+	switch (nr) {
+	case TEMP_PWM_ENABLE:
+		tmp = (data->pwm_fcms[1] >> index) & 1;
+		if (tmp)
+			tmp = 4;
+		else
+			tmp = 3;
+		break;
+	case TEMP_PWM_FAN_MAP:
+		tmp = data->pwm_tfmr[index];
+		break;
+	}
+
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long tmp;
+
+	if (kstrtoul(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	switch (nr) {
+	case TEMP_PWM_ENABLE:
+		if (tmp != 3 && tmp != 4)
+			return -EINVAL;
+		tmp -= 3;
+		mutex_lock(&data->update_lock);
+		data->pwm_fcms[1] &= ~(1 << index);
+		data->pwm_fcms[1] |= tmp << index;
+		w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]);
+		mutex_unlock(&data->update_lock);
+		break;
+	case TEMP_PWM_FAN_MAP:
+		mutex_lock(&data->update_lock);
+		tmp = clamp_val(tmp, 0, 0xff);
+		w83795_write(client, W83795_REG_TFMR(index), tmp);
+		data->pwm_tfmr[index] = tmp;
+		mutex_unlock(&data->update_lock);
+		break;
+	}
+	return count;
+}
+
+#define FANIN_TARGET   0
+#define FANIN_TOL      1
+static ssize_t
+show_fanin(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u16 tmp = 0;
+
+	switch (nr) {
+	case FANIN_TARGET:
+		tmp = fan_from_reg(data->target_speed[index]);
+		break;
+	case FANIN_TOL:
+		tmp = data->tol_speed;
+		break;
+	}
+
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_fanin(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case FANIN_TARGET:
+		val = fan_to_reg(clamp_val(val, 0, 0xfff));
+		w83795_write(client, W83795_REG_FTSH(index), val >> 4);
+		w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
+		data->target_speed[index] = val;
+		break;
+	case FANIN_TOL:
+		val = clamp_val(val, 0, 0x3f);
+		w83795_write(client, W83795_REG_TFTS, val);
+		data->tol_speed = val;
+		break;
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
+static ssize_t
+show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	long tmp = temp_from_reg(data->pwm_temp[index][nr]);
+
+	return sprintf(buf, "%ld\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+	u8 tmp;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val /= 1000;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case TEMP_PWM_TTTI:
+		val = clamp_val(val, 0, 0x7f);
+		w83795_write(client, W83795_REG_TTTI(index), val);
+		break;
+	case TEMP_PWM_CTFS:
+		val = clamp_val(val, 0, 0x7f);
+		w83795_write(client, W83795_REG_CTFS(index), val);
+		break;
+	case TEMP_PWM_HCT:
+		val = clamp_val(val, 0, 0x0f);
+		tmp = w83795_read(client, W83795_REG_HT(index));
+		tmp &= 0x0f;
+		tmp |= (val << 4) & 0xf0;
+		w83795_write(client, W83795_REG_HT(index), tmp);
+		break;
+	case TEMP_PWM_HOT:
+		val = clamp_val(val, 0, 0x0f);
+		tmp = w83795_read(client, W83795_REG_HT(index));
+		tmp &= 0xf0;
+		tmp |= val & 0x0f;
+		w83795_write(client, W83795_REG_HT(index), tmp);
+		break;
+	}
+	data->pwm_temp[index][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+
+	return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]);
+}
+
+static ssize_t
+store_sf4_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	w83795_write(client, W83795_REG_SF4_PWM(index, nr), val);
+	data->sf4_reg[index][SF4_PWM][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+
+	return sprintf(buf, "%u\n",
+		(data->sf4_reg[index][SF4_TEMP][nr]) * 1000);
+}
+
+static ssize_t
+store_sf4_temp(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val /= 1000;
+
+	mutex_lock(&data->update_lock);
+	w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val);
+	data->sf4_reg[index][SF4_TEMP][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	long temp = temp_from_reg(data->temp[index][nr]);
+
+	if (nr == TEMP_READ)
+		temp += (data->temp_read_vrlsb[index] >> 6) * 250;
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	long tmp;
+
+	if (kstrtol(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->temp[index][nr] = temp_to_reg(tmp, -128, 127);
+	w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+static ssize_t
+show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	int tmp;
+
+	if (data->enable_dts & 2)
+		tmp = 5;
+	else
+		tmp = 6;
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+show_dts(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	long temp = temp_from_reg(data->dts[index]);
+
+	temp += (data->dts_read_vrlsb[index] >> 6) * 250;
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct w83795_data *data = dev_get_drvdata(dev);
+	long temp = temp_from_reg(data->dts_ext[nr]);
+
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_dts_ext(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	long tmp;
+
+	if (kstrtol(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->dts_ext[nr] = temp_to_reg(tmp, -128, 127);
+	w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	int tmp;
+
+	if (data->temp_mode & (1 << index))
+		tmp = 3;	/* Thermal diode */
+	else
+		tmp = 4;	/* Thermistor */
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+/* Only for temp1-4 (temp5-6 can only be thermistor) */
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	int reg_shift;
+	unsigned long val;
+	u8 tmp;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if ((val != 4) && (val != 3))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	if (val == 3) {
+		/* Thermal diode */
+		val = 0x01;
+		data->temp_mode |= 1 << index;
+	} else if (val == 4) {
+		/* Thermistor */
+		val = 0x03;
+		data->temp_mode &= ~(1 << index);
+	}
+
+	reg_shift = 2 * index;
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+	tmp &= ~(0x03 << reg_shift);
+	tmp |= val << reg_shift;
+	w83795_write(client, W83795_REG_TEMP_CTRL2, tmp);
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+/* show/store VIN */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	u16 val = data->in[index][nr];
+	u8 lsb_idx;
+
+	switch (nr) {
+	case IN_READ:
+		/* calculate this value again by sensors as sensors3.conf */
+		if ((index >= 17) &&
+		    !((data->has_gain >> (index - 17)) & 1))
+			val *= 8;
+		break;
+	case IN_MAX:
+	case IN_LOW:
+		lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+		val <<= 2;
+		val |= (data->in_lsb[lsb_idx][nr] >>
+			IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]) & 0x03;
+		if ((index >= 17) &&
+		    !((data->has_gain >> (index - 17)) & 1))
+			val *= 8;
+		break;
+	}
+	val = in_from_reg(index, val);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+	 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 tmp;
+	u8 lsb_idx;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val = in_to_reg(index, val);
+
+	if ((index >= 17) &&
+	    !((data->has_gain >> (index - 17)) & 1))
+		val /= 8;
+	val = clamp_val(val, 0, 0x3FF);
+	mutex_lock(&data->update_lock);
+
+	lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+	tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr));
+	tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]);
+	tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT];
+	w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp);
+	data->in_lsb[lsb_idx][nr] = tmp;
+
+	tmp = (val >> 2) & 0xff;
+	w83795_write(client, W83795_REG_IN[index][nr], tmp);
+	data->in[index][nr] = tmp;
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	u16 val = data->setup_pwm[nr];
+
+	switch (nr) {
+	case SETUP_PWM_UPTIME:
+	case SETUP_PWM_DOWNTIME:
+		val = time_from_reg(val);
+		break;
+	}
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+	 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	switch (nr) {
+	case SETUP_PWM_DEFAULT:
+		val = clamp_val(val, 0, 0xff);
+		break;
+	case SETUP_PWM_UPTIME:
+	case SETUP_PWM_DOWNTIME:
+		val = time_to_reg(val);
+		if (val == 0)
+			return -EINVAL;
+		break;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->setup_pwm[nr] = val;
+	w83795_write(client, W83795_REG_SETUP_PWM(nr), val);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+#endif
+
+
+#define NOT_USED			-1
+
+/*
+ * Don't change the attribute order, _max, _min and _beep are accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_IN(index) {						\
+	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
+		IN_READ, index), \
+	SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_MAX, index),				\
+	SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_LOW, index),				\
+	SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \
+	SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE,		\
+		index + ((index > 14) ? 1 : 0)) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_FAN(index) {					\
+	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
+		NULL, FAN_INPUT, index - 1), \
+	SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO,		\
+		show_fan, store_fan_min, FAN_MIN, index - 1),	\
+	SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + 31),			\
+	SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) }
+
+#define SENSOR_ATTR_PWM(index) {					\
+	SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm,		\
+		store_pwm, PWM_OUTPUT, index - 1),			\
+	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
+		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_FREQ, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_NONSTOP, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_START, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO,	\
+		show_pwm, store_pwm, PWM_STOP_TIME, index - 1),	 \
+	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
+		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_DTS(index) {					\
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
+		show_dts_mode, NULL, NOT_USED, index - 7),	\
+	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts,		\
+		NULL, NOT_USED, index - 7),				\
+	SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_dts_ext, \
+		store_dts_ext, DTS_CRIT, NOT_USED),			\
+	SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR,	\
+		show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED),	\
+	SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \
+		store_dts_ext, DTS_WARN, NOT_USED),			\
+	SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED),	\
+	SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,			\
+		show_alarm_beep, NULL, ALARM_STATUS, index + 17),	\
+	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_TEMP(index) {					\
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \
+		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,		\
+		NULL, TEMP_READ, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_CRIT, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_CRIT_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_WARN, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_WARN_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,			\
+		show_alarm_beep, NULL, ALARM_STATUS,			\
+		index + (index > 4 ? 11 : 17)),				\
+	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE,		\
+		index + (index > 4 ? 11 : 17)),				\
+	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm_enable, store_temp_pwm_enable,		\
+		TEMP_PWM_ENABLE, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \
+		show_temp_pwm_enable, store_temp_pwm_enable,		\
+		TEMP_PWM_FAN_MAP, index - 1),				\
+	SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO,		\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \
+	SENSOR_ATTR_2(temp##index##_warn, S_IWUSR | S_IRUGO,		\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \
+	SENSOR_ATTR_2(temp##index##_warn_hyst, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \
+	SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \
+	SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 6, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 6, index - 1) }
+
+
+static struct sensor_device_attribute_2 w83795_in[][5] = {
+	SENSOR_ATTR_IN(0),
+	SENSOR_ATTR_IN(1),
+	SENSOR_ATTR_IN(2),
+	SENSOR_ATTR_IN(3),
+	SENSOR_ATTR_IN(4),
+	SENSOR_ATTR_IN(5),
+	SENSOR_ATTR_IN(6),
+	SENSOR_ATTR_IN(7),
+	SENSOR_ATTR_IN(8),
+	SENSOR_ATTR_IN(9),
+	SENSOR_ATTR_IN(10),
+	SENSOR_ATTR_IN(11),
+	SENSOR_ATTR_IN(12),
+	SENSOR_ATTR_IN(13),
+	SENSOR_ATTR_IN(14),
+	SENSOR_ATTR_IN(15),
+	SENSOR_ATTR_IN(16),
+	SENSOR_ATTR_IN(17),
+	SENSOR_ATTR_IN(18),
+	SENSOR_ATTR_IN(19),
+	SENSOR_ATTR_IN(20),
+};
+
+static const struct sensor_device_attribute_2 w83795_fan[][4] = {
+	SENSOR_ATTR_FAN(1),
+	SENSOR_ATTR_FAN(2),
+	SENSOR_ATTR_FAN(3),
+	SENSOR_ATTR_FAN(4),
+	SENSOR_ATTR_FAN(5),
+	SENSOR_ATTR_FAN(6),
+	SENSOR_ATTR_FAN(7),
+	SENSOR_ATTR_FAN(8),
+	SENSOR_ATTR_FAN(9),
+	SENSOR_ATTR_FAN(10),
+	SENSOR_ATTR_FAN(11),
+	SENSOR_ATTR_FAN(12),
+	SENSOR_ATTR_FAN(13),
+	SENSOR_ATTR_FAN(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
+	SENSOR_ATTR_TEMP(1),
+	SENSOR_ATTR_TEMP(2),
+	SENSOR_ATTR_TEMP(3),
+	SENSOR_ATTR_TEMP(4),
+	SENSOR_ATTR_TEMP(5),
+	SENSOR_ATTR_TEMP(6),
+};
+
+static const struct sensor_device_attribute_2 w83795_dts[][8] = {
+	SENSOR_ATTR_DTS(7),
+	SENSOR_ATTR_DTS(8),
+	SENSOR_ATTR_DTS(9),
+	SENSOR_ATTR_DTS(10),
+	SENSOR_ATTR_DTS(11),
+	SENSOR_ATTR_DTS(12),
+	SENSOR_ATTR_DTS(13),
+	SENSOR_ATTR_DTS(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
+	SENSOR_ATTR_PWM(1),
+	SENSOR_ATTR_PWM(2),
+	SENSOR_ATTR_PWM(3),
+	SENSOR_ATTR_PWM(4),
+	SENSOR_ATTR_PWM(5),
+	SENSOR_ATTR_PWM(6),
+	SENSOR_ATTR_PWM(7),
+	SENSOR_ATTR_PWM(8),
+};
+
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
+static const struct sensor_device_attribute_2 sda_single_files[] = {
+	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_chassis_clear, ALARM_STATUS, 46),
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
+		store_fanin, FANIN_TOL, NOT_USED),
+	SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+	SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+	SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+#endif
+};
+
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
+/*
+ * Driver interface
+ */
+
+static void w83795_init_client(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	static const u16 clkin[4] = {	/* in kHz */
+		14318, 24000, 33333, 48000
+	};
+	u8 config;
+
+	if (reset)
+		w83795_write(client, W83795_REG_CONFIG, 0x80);
+
+	/* Start monitoring if needed */
+	config = w83795_read(client, W83795_REG_CONFIG);
+	if (!(config & W83795_REG_CONFIG_START)) {
+		dev_info(&client->dev, "Enabling monitoring operations\n");
+		w83795_write(client, W83795_REG_CONFIG,
+			     config | W83795_REG_CONFIG_START);
+	}
+
+	data->clkin = clkin[(config >> 3) & 0x3];
+	dev_dbg(&client->dev, "clkin = %u kHz\n", data->clkin);
+}
+
+static int w83795_get_device_id(struct i2c_client *client)
+{
+	int device_id;
+
+	device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID);
+
+	/*
+	 * Special case for rev. A chips; can't be checked first because later
+	 * revisions emulate this for compatibility
+	 */
+	if (device_id < 0 || (device_id & 0xf0) != 0x50) {
+		int alt_id;
+
+		alt_id = i2c_smbus_read_byte_data(client,
+						  W83795_REG_DEVICEID_A);
+		if (alt_id == 0x50)
+			device_id = alt_id;
+	}
+
+	return device_id;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83795_detect(struct i2c_client *client,
+			 struct i2c_board_info *info)
+{
+	int bank, vendor_id, device_id, expected, i2c_addr, config;
+	struct i2c_adapter *adapter = client->adapter;
+	unsigned short address = client->addr;
+	const char *chip_name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+	bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+	if (bank < 0 || (bank & 0x7c)) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "bank");
+		return -ENODEV;
+	}
+
+	/* Check Nuvoton vendor ID */
+	vendor_id = i2c_smbus_read_byte_data(client, W83795_REG_VENDORID);
+	expected = bank & 0x80 ? 0x5c : 0xa3;
+	if (vendor_id != expected) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "vendor id");
+		return -ENODEV;
+	}
+
+	/* Check device ID */
+	device_id = w83795_get_device_id(client) |
+		    (i2c_smbus_read_byte_data(client, W83795_REG_CHIPID) << 8);
+	if ((device_id >> 4) != 0x795) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "device id\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
+	 * should match
+	 */
+	if ((bank & 0x07) == 0) {
+		i2c_addr = i2c_smbus_read_byte_data(client,
+						    W83795_REG_I2C_ADDR);
+		if ((i2c_addr & 0x7f) != address) {
+			dev_dbg(&adapter->dev,
+				"w83795: Detection failed at addr 0x%02hx, "
+				"check %s\n", address, "i2c addr");
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * Check 795 chip type: 795G or 795ADG
+	 * Usually we don't write to chips during detection, but here we don't
+	 * quite have the choice; hopefully it's OK, we are about to return
+	 * success anyway
+	 */
+	if ((bank & 0x07) != 0)
+		i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
+					  bank & ~0x07);
+	config = i2c_smbus_read_byte_data(client, W83795_REG_CONFIG);
+	if (config & W83795_REG_CONFIG_CONFIG48)
+		chip_name = "w83795adg";
+	else
+		chip_name = "w83795g";
+
+	strscpy(info->type, chip_name, I2C_NAME_SIZE);
+	dev_info(&adapter->dev, "Found %s rev. %c at 0x%02hx\n", chip_name,
+		 'A' + (device_id & 0xf), address);
+
+	return 0;
+}
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+#define NUM_PWM_ATTRIBUTES	ARRAY_SIZE(w83795_pwm[0])
+#define NUM_TEMP_ATTRIBUTES	ARRAY_SIZE(w83795_temp[0])
+#else
+#define NUM_PWM_ATTRIBUTES	4
+#define NUM_TEMP_ATTRIBUTES	8
+#endif
+
+static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
+			       const struct device_attribute *))
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	int err, i, j;
+
+	for (i = 0; i < ARRAY_SIZE(w83795_in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
+			err = fn(dev, &w83795_in[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
+			err = fn(dev, &w83795_fan[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+		err = fn(dev, &sda_single_files[i].dev_attr);
+		if (err)
+			return err;
+	}
+
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < data->has_pwm; i++) {
+		for (j = 0; j < NUM_PWM_ATTRIBUTES; j++) {
+			err = fn(dev, &w83795_pwm[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
+		for (j = 0; j < NUM_TEMP_ATTRIBUTES; j++) {
+			if (j == 7 && !data->enable_beep)
+				continue;
+			err = fn(dev, &w83795_temp[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	if (data->enable_dts) {
+		for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
+				err = fn(dev, &w83795_dts[i][j].dev_attr);
+				if (err)
+					return err;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* We need a wrapper that fits in w83795_handle_files */
+static int device_remove_file_wrapper(struct device *dev,
+				      const struct device_attribute *attr)
+{
+	device_remove_file(dev, attr);
+	return 0;
+}
+
+static void w83795_check_dynamic_in_limits(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	u8 vid_ctl;
+	int i, err_max, err_min;
+
+	vid_ctl = w83795_read(client, W83795_REG_VID_CTRL);
+
+	/* Return immediately if VRM isn't configured */
+	if ((vid_ctl & 0x07) == 0x00 || (vid_ctl & 0x07) == 0x07)
+		return;
+
+	data->has_dyn_in = (vid_ctl >> 3) & 0x07;
+	for (i = 0; i < 2; i++) {
+		if (!(data->has_dyn_in & (1 << i)))
+			continue;
+
+		/* Voltage limits in dynamic mode, switch to read-only */
+		err_max = sysfs_chmod_file(&client->dev.kobj,
+					   &w83795_in[i][2].dev_attr.attr,
+					   S_IRUGO);
+		err_min = sysfs_chmod_file(&client->dev.kobj,
+					   &w83795_in[i][3].dev_attr.attr,
+					   S_IRUGO);
+		if (err_max || err_min)
+			dev_warn(&client->dev,
+				 "Failed to set in%d limits read-only (%d, %d)\n",
+				 i, err_max, err_min);
+		else
+			dev_info(&client->dev,
+				 "in%d limits set dynamically from VID\n", i);
+	}
+}
+
+/* Check pins that can be used for either temperature or voltage monitoring */
+static void w83795_apply_temp_config(struct w83795_data *data, u8 config,
+				     int temp_chan, int in_chan)
+{
+	/* config is a 2-bit value */
+	switch (config) {
+	case 0x2: /* Voltage monitoring */
+		data->has_in |= 1 << in_chan;
+		break;
+	case 0x1: /* Thermal diode */
+		if (temp_chan >= 4)
+			break;
+		data->temp_mode |= 1 << temp_chan;
+		fallthrough;
+	case 0x3: /* Thermistor */
+		data->has_temp |= 1 << temp_chan;
+		break;
+	}
+}
+
+static const struct i2c_device_id w83795_id[];
+
+static int w83795_probe(struct i2c_client *client)
+{
+	int i;
+	u8 tmp;
+	struct device *dev = &client->dev;
+	struct w83795_data *data;
+	int err;
+
+	data = devm_kzalloc(dev, sizeof(struct w83795_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->chip_type = i2c_match_id(w83795_id, client)->driver_data;
+	data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+	mutex_init(&data->update_lock);
+
+	/* Initialize the chip */
+	w83795_init_client(client);
+
+	/* Check which voltages and fans are present */
+	data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1)
+		     | (w83795_read(client, W83795_REG_VOLT_CTRL2) << 8);
+	data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1)
+		      | (w83795_read(client, W83795_REG_FANIN_CTRL2) << 8);
+
+	/* Check which analog temperatures and extra voltages are present */
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
+	if (tmp & 0x20)
+		data->enable_dts = 1;
+	w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 5, 16);
+	w83795_apply_temp_config(data, tmp & 0x3, 4, 15);
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+	w83795_apply_temp_config(data, tmp >> 6, 3, 20);
+	w83795_apply_temp_config(data, (tmp >> 4) & 0x3, 2, 19);
+	w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 1, 18);
+	w83795_apply_temp_config(data, tmp & 0x3, 0, 17);
+
+	/* Check DTS enable status */
+	if (data->enable_dts) {
+		if (1 & w83795_read(client, W83795_REG_DTSC))
+			data->enable_dts |= 2;
+		data->has_dts = w83795_read(client, W83795_REG_DTSE);
+	}
+
+	/* Report PECI Tbase values */
+	if (data->enable_dts == 1) {
+		for (i = 0; i < 8; i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			tmp = w83795_read(client, W83795_REG_PECI_TBASE(i));
+			dev_info(&client->dev,
+				 "PECI agent %d Tbase temperature: %u\n",
+				 i + 1, (unsigned int)tmp & 0x7f);
+		}
+	}
+
+	data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;
+
+	/* pwm and smart fan */
+	if (data->chip_type == w83795g)
+		data->has_pwm = 8;
+	else
+		data->has_pwm = 2;
+
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/*
+		 * The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both
+		 */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
+	err = w83795_handle_files(dev, device_create_file);
+	if (err)
+		goto exit_remove;
+
+	if (data->chip_type == w83795g)
+		w83795_check_dynamic_in_limits(client);
+
+	data->hwmon_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	w83795_handle_files(dev, device_remove_file_wrapper);
+	return err;
+}
+
+static void w83795_remove(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	w83795_handle_files(&client->dev, device_remove_file_wrapper);
+}
+
+
+static const struct i2c_device_id w83795_id[] = {
+	{ "w83795g", w83795g },
+	{ "w83795adg", w83795adg },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83795_id);
+
+static struct i2c_driver w83795_driver = {
+	.driver = {
+		   .name = "w83795",
+	},
+	.probe		= w83795_probe,
+	.remove		= w83795_remove,
+	.id_table	= w83795_id,
+
+	.class		= I2C_CLASS_HWMON,
+	.detect		= w83795_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(w83795_driver);
+
+MODULE_AUTHOR("Wei Song, Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("W83795G/ADG hardware monitoring driver");
+MODULE_LICENSE("GPL");