Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 532 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
new file mode 100644
index 0000000000..dfad5bad50
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * HiSilicon I2C Controller Driver for Kunpeng SoC
+ *
+ * Copyright (c) 2021 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/units.h>
+
+#define HISI_I2C_FRAME_CTRL		0x0000
+#define   HISI_I2C_FRAME_CTRL_SPEED_MODE	GENMASK(1, 0)
+#define   HISI_I2C_FRAME_CTRL_ADDR_TEN	BIT(2)
+#define HISI_I2C_SLV_ADDR		0x0004
+#define   HISI_I2C_SLV_ADDR_VAL		GENMASK(9, 0)
+#define   HISI_I2C_SLV_ADDR_GC_S_MODE	BIT(10)
+#define   HISI_I2C_SLV_ADDR_GC_S_EN	BIT(11)
+#define HISI_I2C_CMD_TXDATA		0x0008
+#define   HISI_I2C_CMD_TXDATA_DATA	GENMASK(7, 0)
+#define   HISI_I2C_CMD_TXDATA_RW	BIT(8)
+#define   HISI_I2C_CMD_TXDATA_P_EN	BIT(9)
+#define   HISI_I2C_CMD_TXDATA_SR_EN	BIT(10)
+#define HISI_I2C_RXDATA			0x000c
+#define   HISI_I2C_RXDATA_DATA		GENMASK(7, 0)
+#define HISI_I2C_SS_SCL_HCNT		0x0010
+#define HISI_I2C_SS_SCL_LCNT		0x0014
+#define HISI_I2C_FS_SCL_HCNT		0x0018
+#define HISI_I2C_FS_SCL_LCNT		0x001c
+#define HISI_I2C_HS_SCL_HCNT		0x0020
+#define HISI_I2C_HS_SCL_LCNT		0x0024
+#define HISI_I2C_FIFO_CTRL		0x0028
+#define   HISI_I2C_FIFO_RX_CLR		BIT(0)
+#define   HISI_I2C_FIFO_TX_CLR		BIT(1)
+#define   HISI_I2C_FIFO_RX_AF_THRESH	GENMASK(7, 2)
+#define   HISI_I2C_FIFO_TX_AE_THRESH	GENMASK(13, 8)
+#define HISI_I2C_FIFO_STATE		0x002c
+#define   HISI_I2C_FIFO_STATE_RX_RERR	BIT(0)
+#define   HISI_I2C_FIFO_STATE_RX_WERR	BIT(1)
+#define   HISI_I2C_FIFO_STATE_RX_EMPTY	BIT(3)
+#define   HISI_I2C_FIFO_STATE_TX_RERR	BIT(6)
+#define   HISI_I2C_FIFO_STATE_TX_WERR	BIT(7)
+#define   HISI_I2C_FIFO_STATE_TX_FULL	BIT(11)
+#define HISI_I2C_SDA_HOLD		0x0030
+#define   HISI_I2C_SDA_HOLD_TX		GENMASK(15, 0)
+#define   HISI_I2C_SDA_HOLD_RX		GENMASK(23, 16)
+#define HISI_I2C_FS_SPK_LEN		0x0038
+#define   HISI_I2C_FS_SPK_LEN_CNT	GENMASK(7, 0)
+#define HISI_I2C_HS_SPK_LEN		0x003c
+#define   HISI_I2C_HS_SPK_LEN_CNT	GENMASK(7, 0)
+#define HISI_I2C_INT_MSTAT		0x0044
+#define HISI_I2C_INT_CLR		0x0048
+#define HISI_I2C_INT_MASK		0x004C
+#define HISI_I2C_TRANS_STATE		0x0050
+#define HISI_I2C_TRANS_ERR		0x0054
+#define HISI_I2C_VERSION		0x0058
+
+#define HISI_I2C_INT_ALL	GENMASK(4, 0)
+#define HISI_I2C_INT_TRANS_CPLT	BIT(0)
+#define HISI_I2C_INT_TRANS_ERR	BIT(1)
+#define HISI_I2C_INT_FIFO_ERR	BIT(2)
+#define HISI_I2C_INT_RX_FULL	BIT(3)
+#define HISI_I2C_INT_TX_EMPTY	BIT(4)
+#define HISI_I2C_INT_ERR \
+	(HISI_I2C_INT_TRANS_ERR | HISI_I2C_INT_FIFO_ERR)
+
+#define HISI_I2C_STD_SPEED_MODE		0
+#define HISI_I2C_FAST_SPEED_MODE	1
+#define HISI_I2C_HIGH_SPEED_MODE	2
+
+#define HISI_I2C_TX_FIFO_DEPTH		64
+#define HISI_I2C_RX_FIFO_DEPTH		64
+#define HISI_I2C_TX_F_AE_THRESH		1
+#define HISI_I2C_RX_F_AF_THRESH		60
+
+#define NSEC_TO_CYCLES(ns, clk_rate_khz) \
+	DIV_ROUND_UP_ULL((clk_rate_khz) * (ns), NSEC_PER_MSEC)
+
+struct hisi_i2c_controller {
+	struct i2c_adapter adapter;
+	void __iomem *iobase;
+	struct device *dev;
+	struct clk *clk;
+	int irq;
+
+	/* Intermediates for recording the transfer process */
+	struct completion *completion;
+	struct i2c_msg *msgs;
+	int msg_num;
+	int msg_tx_idx;
+	int buf_tx_idx;
+	int msg_rx_idx;
+	int buf_rx_idx;
+	u16 tar_addr;
+	u32 xfer_err;
+
+	/* I2C bus configuration */
+	struct i2c_timings t;
+	u32 clk_rate_khz;
+	u32 spk_len;
+};
+
+static void hisi_i2c_enable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+	writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_disable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+	writel_relaxed((~mask) & HISI_I2C_INT_ALL, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+	writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
+}
+
+static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
+{
+	u32 int_err = ctlr->xfer_err, reg;
+
+	if (int_err & HISI_I2C_INT_FIFO_ERR) {
+		reg = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+
+		if (reg & HISI_I2C_FIFO_STATE_RX_RERR)
+			dev_err(ctlr->dev, "rx fifo error read\n");
+
+		if (reg & HISI_I2C_FIFO_STATE_RX_WERR)
+			dev_err(ctlr->dev, "rx fifo error write\n");
+
+		if (reg & HISI_I2C_FIFO_STATE_TX_RERR)
+			dev_err(ctlr->dev, "tx fifo error read\n");
+
+		if (reg & HISI_I2C_FIFO_STATE_TX_WERR)
+			dev_err(ctlr->dev, "tx fifo error write\n");
+	}
+}
+
+static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
+{
+	struct i2c_msg *msg = ctlr->msgs;
+	u32 reg;
+
+	reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+	reg &= ~HISI_I2C_FRAME_CTRL_ADDR_TEN;
+	if (msg->flags & I2C_M_TEN)
+		reg |= HISI_I2C_FRAME_CTRL_ADDR_TEN;
+	writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+	reg = readl(ctlr->iobase + HISI_I2C_SLV_ADDR);
+	reg &= ~HISI_I2C_SLV_ADDR_VAL;
+	reg |= FIELD_PREP(HISI_I2C_SLV_ADDR_VAL, msg->addr);
+	writel(reg, ctlr->iobase + HISI_I2C_SLV_ADDR);
+
+	reg = readl(ctlr->iobase + HISI_I2C_FIFO_CTRL);
+	reg |= HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR;
+	writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+	reg &= ~(HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR);
+	writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+
+	hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+	hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
+
+	return 0;
+}
+
+static void hisi_i2c_reset_xfer(struct hisi_i2c_controller *ctlr)
+{
+	ctlr->msg_num = 0;
+	ctlr->xfer_err = 0;
+	ctlr->msg_tx_idx = 0;
+	ctlr->msg_rx_idx = 0;
+	ctlr->buf_tx_idx = 0;
+	ctlr->buf_rx_idx = 0;
+}
+
+/*
+ * Initialize the transfer information and start the I2C bus transfer.
+ * We only configure the transfer and do some pre/post works here, and
+ * wait for the transfer done. The major transfer process is performed
+ * in the IRQ handler.
+ */
+static int hisi_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct hisi_i2c_controller *ctlr = i2c_get_adapdata(adap);
+	DECLARE_COMPLETION_ONSTACK(done);
+	int ret = num;
+
+	hisi_i2c_reset_xfer(ctlr);
+	ctlr->completion = &done;
+	ctlr->msg_num = num;
+	ctlr->msgs = msgs;
+
+	hisi_i2c_start_xfer(ctlr);
+
+	if (!wait_for_completion_timeout(ctlr->completion, adap->timeout)) {
+		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+		synchronize_irq(ctlr->irq);
+		i2c_recover_bus(&ctlr->adapter);
+		dev_err(ctlr->dev, "bus transfer timeout\n");
+		ret = -EIO;
+	}
+
+	if (ctlr->xfer_err) {
+		hisi_i2c_handle_errors(ctlr);
+		ret = -EIO;
+	}
+
+	hisi_i2c_reset_xfer(ctlr);
+	ctlr->completion = NULL;
+
+	return ret;
+}
+
+static u32 hisi_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm hisi_i2c_algo = {
+	.master_xfer	= hisi_i2c_master_xfer,
+	.functionality	= hisi_i2c_functionality,
+};
+
+static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
+{
+	struct i2c_msg *cur_msg;
+	u32 fifo_state;
+
+	while (ctlr->msg_rx_idx < ctlr->msg_num) {
+		cur_msg = ctlr->msgs + ctlr->msg_rx_idx;
+
+		if (!(cur_msg->flags & I2C_M_RD)) {
+			ctlr->msg_rx_idx++;
+			continue;
+		}
+
+		fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+		while (!(fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY) &&
+		       ctlr->buf_rx_idx < cur_msg->len) {
+			cur_msg->buf[ctlr->buf_rx_idx++] = readl(ctlr->iobase + HISI_I2C_RXDATA);
+			fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+		}
+
+		if (ctlr->buf_rx_idx == cur_msg->len) {
+			ctlr->buf_rx_idx = 0;
+			ctlr->msg_rx_idx++;
+		}
+
+		if (fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY)
+			break;
+	}
+
+	return 0;
+}
+
+static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
+{
+	int max_write = HISI_I2C_TX_FIFO_DEPTH;
+	bool need_restart = false, last_msg;
+	struct i2c_msg *cur_msg;
+	u32 cmd, fifo_state;
+
+	while (ctlr->msg_tx_idx < ctlr->msg_num) {
+		cur_msg = ctlr->msgs + ctlr->msg_tx_idx;
+		last_msg = (ctlr->msg_tx_idx == ctlr->msg_num - 1);
+
+		/* Signal the SR bit when we start transferring a new message */
+		if (ctlr->msg_tx_idx && !ctlr->buf_tx_idx)
+			need_restart = true;
+
+		fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+		while (!(fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) &&
+		       ctlr->buf_tx_idx < cur_msg->len && max_write) {
+			cmd = 0;
+
+			if (need_restart) {
+				cmd |= HISI_I2C_CMD_TXDATA_SR_EN;
+				need_restart = false;
+			}
+
+			/* Signal the STOP bit at the last frame of the last message */
+			if (ctlr->buf_tx_idx == cur_msg->len - 1 && last_msg)
+				cmd |= HISI_I2C_CMD_TXDATA_P_EN;
+
+			if (cur_msg->flags & I2C_M_RD)
+				cmd |= HISI_I2C_CMD_TXDATA_RW;
+			else
+				cmd |= FIELD_PREP(HISI_I2C_CMD_TXDATA_DATA,
+						  cur_msg->buf[ctlr->buf_tx_idx]);
+
+			writel(cmd, ctlr->iobase + HISI_I2C_CMD_TXDATA);
+			ctlr->buf_tx_idx++;
+			max_write--;
+
+			fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+		}
+
+		/* Update the transfer index after per message transfer is done. */
+		if (ctlr->buf_tx_idx == cur_msg->len) {
+			ctlr->buf_tx_idx = 0;
+			ctlr->msg_tx_idx++;
+		}
+
+		if ((fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) ||
+		    max_write == 0)
+			break;
+	}
+
+	/*
+	 * Disable the TX_EMPTY interrupt after finishing all the messages to
+	 * avoid overwhelming the CPU.
+	 */
+	if (ctlr->msg_tx_idx == ctlr->msg_num)
+		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_TX_EMPTY);
+}
+
+static irqreturn_t hisi_i2c_irq(int irq, void *context)
+{
+	struct hisi_i2c_controller *ctlr = context;
+	u32 int_stat;
+
+	/*
+	 * Don't handle the interrupt if cltr->completion is NULL. We may
+	 * reach here because the interrupt is spurious or the transfer is
+	 * started by another port (e.g. firmware) rather than us.
+	 */
+	if (!ctlr->completion)
+		return IRQ_NONE;
+
+	int_stat = readl(ctlr->iobase + HISI_I2C_INT_MSTAT);
+	hisi_i2c_clear_int(ctlr, int_stat);
+	if (!(int_stat & HISI_I2C_INT_ALL))
+		return IRQ_NONE;
+
+	if (int_stat & HISI_I2C_INT_TX_EMPTY)
+		hisi_i2c_xfer_msg(ctlr);
+
+	if (int_stat & HISI_I2C_INT_ERR) {
+		ctlr->xfer_err = int_stat;
+		goto out;
+	}
+
+	/* Drain the rx fifo before finish the transfer */
+	if (int_stat & (HISI_I2C_INT_TRANS_CPLT | HISI_I2C_INT_RX_FULL))
+		hisi_i2c_read_rx_fifo(ctlr);
+
+out:
+	/*
+	 * Only use TRANS_CPLT to indicate the completion. On error cases we'll
+	 * get two interrupts, INT_ERR first then TRANS_CPLT.
+	 */
+	if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
+		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+		hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+		complete(ctlr->completion);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Helper function for calculating and configuring the HIGH and LOW
+ * periods of SCL clock. The caller will pass the ratio of the
+ * counts (divide / divisor) according to the target speed mode,
+ * and the target registers.
+ */
+static void hisi_i2c_set_scl(struct hisi_i2c_controller *ctlr,
+			     u32 divide, u32 divisor,
+			     u32 reg_hcnt, u32 reg_lcnt)
+{
+	u32 total_cnt, t_scl_hcnt, t_scl_lcnt, scl_fall_cnt, scl_rise_cnt;
+	u32 scl_hcnt, scl_lcnt;
+
+	/* Total SCL clock cycles per speed period */
+	total_cnt = DIV_ROUND_UP_ULL(ctlr->clk_rate_khz * HZ_PER_KHZ, ctlr->t.bus_freq_hz);
+	/* Total HIGH level SCL clock cycles including edges */
+	t_scl_hcnt = DIV_ROUND_UP_ULL(total_cnt * divide, divisor);
+	/* Total LOW level SCL clock cycles including edges */
+	t_scl_lcnt = total_cnt - t_scl_hcnt;
+	/* Fall edge SCL clock cycles */
+	scl_fall_cnt = NSEC_TO_CYCLES(ctlr->t.scl_fall_ns, ctlr->clk_rate_khz);
+	/* Rise edge SCL clock cycles */
+	scl_rise_cnt = NSEC_TO_CYCLES(ctlr->t.scl_rise_ns, ctlr->clk_rate_khz);
+
+	/* Calculated HIGH and LOW periods of SCL clock */
+	scl_hcnt = t_scl_hcnt - ctlr->spk_len - 7 - scl_fall_cnt;
+	scl_lcnt = t_scl_lcnt - 1 - scl_rise_cnt;
+
+	writel(scl_hcnt, ctlr->iobase + reg_hcnt);
+	writel(scl_lcnt, ctlr->iobase + reg_lcnt);
+}
+
+static void hisi_i2c_configure_bus(struct hisi_i2c_controller *ctlr)
+{
+	u32 reg, sda_hold_cnt, speed_mode;
+
+	i2c_parse_fw_timings(ctlr->dev, &ctlr->t, true);
+	ctlr->spk_len = NSEC_TO_CYCLES(ctlr->t.digital_filter_width_ns, ctlr->clk_rate_khz);
+
+	switch (ctlr->t.bus_freq_hz) {
+	case I2C_MAX_FAST_MODE_FREQ:
+		speed_mode = HISI_I2C_FAST_SPEED_MODE;
+		hisi_i2c_set_scl(ctlr, 26, 76, HISI_I2C_FS_SCL_HCNT, HISI_I2C_FS_SCL_LCNT);
+		break;
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+		speed_mode = HISI_I2C_HIGH_SPEED_MODE;
+		hisi_i2c_set_scl(ctlr, 6, 22, HISI_I2C_HS_SCL_HCNT, HISI_I2C_HS_SCL_LCNT);
+		break;
+	case I2C_MAX_STANDARD_MODE_FREQ:
+	default:
+		speed_mode = HISI_I2C_STD_SPEED_MODE;
+
+		/* For default condition force the bus speed to standard mode. */
+		ctlr->t.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+		hisi_i2c_set_scl(ctlr, 40, 87, HISI_I2C_SS_SCL_HCNT, HISI_I2C_SS_SCL_LCNT);
+		break;
+	}
+
+	reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+	reg &= ~HISI_I2C_FRAME_CTRL_SPEED_MODE;
+	reg |= FIELD_PREP(HISI_I2C_FRAME_CTRL_SPEED_MODE, speed_mode);
+	writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+	sda_hold_cnt = NSEC_TO_CYCLES(ctlr->t.sda_hold_ns, ctlr->clk_rate_khz);
+
+	reg = FIELD_PREP(HISI_I2C_SDA_HOLD_TX, sda_hold_cnt);
+	writel(reg, ctlr->iobase + HISI_I2C_SDA_HOLD);
+
+	writel(ctlr->spk_len, ctlr->iobase + HISI_I2C_FS_SPK_LEN);
+
+	reg = FIELD_PREP(HISI_I2C_FIFO_RX_AF_THRESH, HISI_I2C_RX_F_AF_THRESH);
+	reg |= FIELD_PREP(HISI_I2C_FIFO_TX_AE_THRESH, HISI_I2C_TX_F_AE_THRESH);
+	writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+}
+
+static int hisi_i2c_probe(struct platform_device *pdev)
+{
+	struct hisi_i2c_controller *ctlr;
+	struct device *dev = &pdev->dev;
+	struct i2c_adapter *adapter;
+	u64 clk_rate_hz;
+	u32 hw_version;
+	int ret;
+
+	ctlr = devm_kzalloc(dev, sizeof(*ctlr), GFP_KERNEL);
+	if (!ctlr)
+		return -ENOMEM;
+
+	ctlr->iobase = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctlr->iobase))
+		return PTR_ERR(ctlr->iobase);
+
+	ctlr->irq = platform_get_irq(pdev, 0);
+	if (ctlr->irq < 0)
+		return ctlr->irq;
+
+	ctlr->dev = dev;
+
+	hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+
+	ret = devm_request_irq(dev, ctlr->irq, hisi_i2c_irq, 0, "hisi-i2c", ctlr);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to request irq handler\n");
+
+	ctlr->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
+	if (IS_ERR_OR_NULL(ctlr->clk)) {
+		ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to get clock frequency\n");
+	} else {
+		clk_rate_hz = clk_get_rate(ctlr->clk);
+	}
+
+	ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(clk_rate_hz, HZ_PER_KHZ);
+
+	hisi_i2c_configure_bus(ctlr);
+
+	adapter = &ctlr->adapter;
+	snprintf(adapter->name, sizeof(adapter->name),
+		 "HiSilicon I2C Controller %s", dev_name(dev));
+	adapter->owner = THIS_MODULE;
+	adapter->algo = &hisi_i2c_algo;
+	adapter->dev.parent = dev;
+	i2c_set_adapdata(adapter, ctlr);
+
+	ret = devm_i2c_add_adapter(dev, adapter);
+	if (ret)
+		return ret;
+
+	hw_version = readl(ctlr->iobase + HISI_I2C_VERSION);
+	dev_info(ctlr->dev, "speed mode is %s. hw version 0x%x\n",
+		 i2c_freq_mode_string(ctlr->t.bus_freq_hz), hw_version);
+
+	return 0;
+}
+
+static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
+	{ "HISI03D1", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
+
+static const struct of_device_id hisi_i2c_dts_ids[] = {
+	{ .compatible = "hisilicon,ascend910-i2c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hisi_i2c_dts_ids);
+
+static struct platform_driver hisi_i2c_driver = {
+	.probe		= hisi_i2c_probe,
+	.driver		= {
+		.name	= "hisi-i2c",
+		.acpi_match_table = hisi_i2c_acpi_ids,
+		.of_match_table = hisi_i2c_dts_ids,
+	},
+};
+module_platform_driver(hisi_i2c_driver);
+
+MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
+MODULE_DESCRIPTION("HiSilicon I2C Controller Driver");
+MODULE_LICENSE("GPL");