diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:37 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:37 +0000 |
commit | 94ac2ab3fff96814d7460a27a0e9d004abbd4128 (patch) | |
tree | 9a4eb8cc234b540b0f4b93363109cdd37a20540b /drivers/i2c/busses/i2c-i801.c | |
parent | Adding debian version 6.8.12-1. (diff) | |
download | linux-94ac2ab3fff96814d7460a27a0e9d004abbd4128.tar.xz linux-94ac2ab3fff96814d7460a27a0e9d004abbd4128.zip |
Merging upstream version 6.9.2.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/i2c/busses/i2c-i801.c')
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 223 |
1 files changed, 117 insertions, 106 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 274e987e4c..79870dd7a0 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -205,6 +205,8 @@ #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ STATUS_ERROR_FLAGS) +#define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1) + /* Older devices have their ID defined in <linux/pci_ids.h> */ #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3 @@ -328,11 +330,39 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" "\t\t 0x10 don't use interrupts\n" "\t\t 0x20 disable SMBus Host Notify "); +static int i801_get_block_len(struct i801_priv *priv) +{ + u8 len = inb_p(SMBHSTDAT0(priv)); + + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { + pci_err(priv->pci_dev, "Illegal SMBus block read size %u\n", len); + return -EPROTO; + } + + return len; +} + +static int i801_check_and_clear_pec_error(struct i801_priv *priv) +{ + u8 status; + + if (!(priv->features & FEATURE_SMBUS_PEC)) + return 0; + + status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; + if (status) { + outb_p(status, SMBAUXSTS(priv)); + return -EBADMSG; + } + + return 0; +} + /* Make sure the SMBus host is ready to start transmitting. Return 0 if it is, -EBUSY if it is not. */ static int i801_check_pre(struct i801_priv *priv) { - int status; + int status, result; status = inb_p(SMBHSTSTS(priv)); if (status & SMBHSTSTS_HOST_BUSY) { @@ -353,13 +383,9 @@ static int i801_check_pre(struct i801_priv *priv) * the hardware was already in this state when the driver * started. */ - if (priv->features & FEATURE_SMBUS_PEC) { - status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; - if (status) { - pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status); - outb_p(status, SMBAUXSTS(priv)); - } - } + result = i801_check_and_clear_pec_error(priv); + if (result) + pci_dbg(priv->pci_dev, "Clearing aux status flag CRCE\n"); return 0; } @@ -408,14 +434,12 @@ static int i801_check_post(struct i801_priv *priv, int status) * bit is harmless as long as it's cleared before * the next operation. */ - if ((priv->features & FEATURE_SMBUS_PEC) && - (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) { - outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv)); - result = -EBADMSG; - dev_dbg(&priv->pci_dev->dev, "PEC error\n"); + result = i801_check_and_clear_pec_error(priv); + if (result) { + pci_dbg(priv->pci_dev, "PEC error\n"); } else { result = -ENXIO; - dev_dbg(&priv->pci_dev->dev, "No response\n"); + pci_dbg(priv->pci_dev, "No response\n"); } } if (status & SMBHSTSTS_BUS_ERR) { @@ -512,9 +536,9 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, if (read_write == I2C_SMBUS_READ || command == I2C_SMBUS_BLOCK_PROC_CALL) { - len = inb_p(SMBHSTDAT0(priv)); - if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { - status = -EPROTO; + len = i801_get_block_len(priv); + if (len < 0) { + status = len; goto out; } @@ -531,17 +555,17 @@ out: static void i801_isr_byte_done(struct i801_priv *priv) { if (priv->is_read) { - /* For SMBus block reads, length is received with first byte */ - if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && - (priv->count == 0)) { - priv->len = inb_p(SMBHSTDAT0(priv)); - if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { - dev_err(&priv->pci_dev->dev, - "Illegal SMBus block read size %d\n", - priv->len); + /* + * At transfer start i801_smbus_block_transaction() marks + * the block length as invalid. Check for this sentinel value + * and read the block length from SMBHSTDAT0. + */ + if (priv->len == SMBUS_LEN_SENTINEL) { + priv->len = i801_get_block_len(priv); + if (priv->len < 0) /* FIXME: Recover */ priv->len = I2C_SMBUS_BLOCK_MAX; - } + priv->data[-1] = priv->len; } @@ -688,13 +712,14 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, if (status) return status; - if (i == 1 && read_write == I2C_SMBUS_READ - && command != I2C_SMBUS_I2C_BLOCK_DATA) { - len = inb_p(SMBHSTDAT0(priv)); - if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { - dev_err(&priv->pci_dev->dev, - "Illegal SMBus block read size %d\n", - len); + /* + * At transfer start i801_smbus_block_transaction() marks + * the block length as invalid. Check for this sentinel value + * and read the block length from SMBHSTDAT0. + */ + if (len == SMBUS_LEN_SENTINEL) { + len = i801_get_block_len(priv); + if (len < 0) { /* Recover */ while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) @@ -792,77 +817,66 @@ static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data return 0; } -/* Block transaction function */ -static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, - u8 addr, u8 hstcmd, char read_write, int command) +static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, + u8 addr, u8 hstcmd, char read_write, int command) { - int result = 0; - unsigned char hostc; - if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) - data->block[0] = I2C_SMBUS_BLOCK_MAX; + /* Mark block length as invalid */ + data->block[0] = SMBUS_LEN_SENTINEL; else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) return -EPROTO; - switch (command) { - case I2C_SMBUS_BLOCK_DATA: - i801_set_hstadd(priv, addr, read_write); - outb_p(hstcmd, SMBHSTCMD(priv)); - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - /* - * NB: page 240 of ICH5 datasheet shows that the R/#W - * bit should be cleared here, even when reading. - * However if SPD Write Disable is set (Lynx Point and later), - * the read will fail if we don't set the R/#W bit. - */ - i801_set_hstadd(priv, addr, - priv->original_hstcfg & SMBHSTCFG_SPD_WD ? - read_write : I2C_SMBUS_WRITE); - if (read_write == I2C_SMBUS_READ) { - /* NB: page 240 of ICH5 datasheet also shows - * that DATA1 is the cmd field when reading - */ - outb_p(hstcmd, SMBHSTDAT1(priv)); - } else - outb_p(hstcmd, SMBHSTCMD(priv)); - - if (read_write == I2C_SMBUS_WRITE) { - /* set I2C_EN bit in configuration register */ - pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); - pci_write_config_byte(priv->pci_dev, SMBHSTCFG, - hostc | SMBHSTCFG_I2C_EN); - } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { - dev_err(&priv->pci_dev->dev, - "I2C block read is unsupported!\n"); - return -EOPNOTSUPP; - } - break; - case I2C_SMBUS_BLOCK_PROC_CALL: + if (command == I2C_SMBUS_BLOCK_PROC_CALL) /* Needs to be flagged as write transaction */ i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); + else + i801_set_hstadd(priv, addr, read_write); + outb_p(hstcmd, SMBHSTCMD(priv)); + + if (priv->features & FEATURE_BLOCK_BUFFER) + return i801_block_transaction_by_block(priv, data, read_write, command); + else + return i801_block_transaction_byte_by_byte(priv, data, read_write, command); +} + +static int i801_i2c_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, + u8 addr, u8 hstcmd, char read_write, int command) +{ + int result; + u8 hostc; + + if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + /* + * NB: page 240 of ICH5 datasheet shows that the R/#W bit should be cleared here, + * even when reading. However if SPD Write Disable is set (Lynx Point and later), + * the read will fail if we don't set the R/#W bit. + */ + i801_set_hstadd(priv, addr, + priv->original_hstcfg & SMBHSTCFG_SPD_WD ? read_write : I2C_SMBUS_WRITE); + + /* NB: page 240 of ICH5 datasheet shows that DATA1 is the cmd field when reading */ + if (read_write == I2C_SMBUS_READ) + outb_p(hstcmd, SMBHSTDAT1(priv)); + else outb_p(hstcmd, SMBHSTCMD(priv)); - break; + + if (read_write == I2C_SMBUS_WRITE) { + /* set I2C_EN bit in configuration register */ + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN); + } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { + pci_err(priv->pci_dev, "I2C block read is unsupported!\n"); + return -EOPNOTSUPP; } - /* Experience has shown that the block buffer can only be used for - SMBus (not I2C) block transactions, even though the datasheet - doesn't mention this limitation. */ - if ((priv->features & FEATURE_BLOCK_BUFFER) && - command != I2C_SMBUS_I2C_BLOCK_DATA) - result = i801_block_transaction_by_block(priv, data, - read_write, - command); - else - result = i801_block_transaction_byte_by_byte(priv, data, - read_write, - command); + /* Block buffer isn't supported for I2C block transactions */ + result = i801_block_transaction_byte_by_byte(priv, data, read_write, command); - if (command == I2C_SMBUS_I2C_BLOCK_DATA - && read_write == I2C_SMBUS_WRITE) { - /* restore saved configuration register value */ + /* restore saved configuration register value */ + if (read_write == I2C_SMBUS_WRITE) pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); - } + return result; } @@ -893,10 +907,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv)); - if (size == I2C_SMBUS_BLOCK_DATA || - size == I2C_SMBUS_I2C_BLOCK_DATA || - size == I2C_SMBUS_BLOCK_PROC_CALL) - ret = i801_block_transaction(priv, data, addr, command, read_write, size); + if (size == I2C_SMBUS_BLOCK_DATA || size == I2C_SMBUS_BLOCK_PROC_CALL) + ret = i801_smbus_block_transaction(priv, data, addr, command, read_write, size); + else if (size == I2C_SMBUS_I2C_BLOCK_DATA) + ret = i801_i2c_block_transaction(priv, data, addr, command, read_write, size); else ret = i801_simple_transaction(priv, data, addr, command, read_write, size); @@ -969,11 +983,10 @@ static const struct i2c_algorithm smbus_algorithm = { .functionality = i801_func, }; -#define FEATURES_ICH5 (FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ | \ - FEATURE_IRQ | FEATURE_SMBUS_PEC | \ - FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY) #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \ FEATURE_HOST_NOTIFY) +#define FEATURES_ICH5 (FEATURES_ICH4 | FEATURE_BLOCK_PROC | \ + FEATURE_I2C_BLOCK_READ | FEATURE_IRQ) static const struct pci_device_id i801_ids[] = { { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) }, @@ -1117,7 +1130,7 @@ static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) { int i, count; - if (dm->type != 10) + if (dm->type != DMI_ENTRY_ONBOARD_DEVICE) return; count = (dm->length - sizeof(struct dmi_header)) / 2; @@ -1447,8 +1460,7 @@ static inline void i801_del_mux(struct i801_priv *priv) { } #endif static struct platform_device * -i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, - struct resource *tco_res) +i801_add_tco_spt(struct pci_dev *pci_dev, struct resource *tco_res) { static const struct itco_wdt_platform_data pldata = { .name = "Intel PCH", @@ -1479,8 +1491,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, } static struct platform_device * -i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev, - struct resource *tco_res) +i801_add_tco_cnl(struct pci_dev *pci_dev, struct resource *tco_res) { static const struct itco_wdt_platform_data pldata = { .name = "Intel PCH", @@ -1520,9 +1531,9 @@ static void i801_add_tco(struct i801_priv *priv) res->flags = IORESOURCE_IO; if (priv->features & FEATURE_TCO_CNL) - priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res); + priv->tco_pdev = i801_add_tco_cnl(pci_dev, tco_res); else - priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res); + priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res); if (IS_ERR(priv->tco_pdev)) dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); |