summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/muxes/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/i2c/muxes/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/i2c/muxes/Kconfig')
-rw-r--r--drivers/i2c/muxes/Kconfig122
1 files changed, 122 insertions, 0 deletions
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
new file mode 100644
index 0000000000..db1b905761
--- /dev/null
+++ b/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+ depends on I2C_MUX
+
+config I2C_ARB_GPIO_CHALLENGE
+ tristate "GPIO-based I2C arbitration"
+ depends on GPIOLIB || COMPILE_TEST
+ depends on OF
+ help
+ If you say yes to this option, support will be included for an
+ I2C multimaster arbitration scheme using GPIOs and a challenge &
+ response mechanism where masters have to claim the bus by asserting
+ a GPIO.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-arb-gpio-challenge.
+
+config I2C_MUX_GPIO
+ tristate "GPIO-based I2C multiplexer"
+ depends on GPIOLIB
+ help
+ If you say yes to this option, support will be included for a
+ GPIO based I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which is controlled
+ through GPIO pins.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-gpio.
+
+config I2C_MUX_GPMUX
+ tristate "General Purpose I2C multiplexer"
+ select MULTIPLEXER
+ depends on OF
+ help
+ If you say yes to this option, support will be included for a
+ general purpose I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which in turn is controlled
+ by a MUX-controller from the MUX subsystem.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-gpmux.
+
+config I2C_MUX_LTC4306
+ tristate "LTC LTC4306/5 I2C multiplexer"
+ select GPIOLIB
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Analog Devices
+ LTC4306 or LTC4305 I2C mux/switch devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-ltc4306.
+
+config I2C_MUX_PCA9541
+ tristate "NXP PCA9541 I2C Master Selector"
+ help
+ If you say yes here you get support for the NXP PCA9541
+ I2C Master Selector.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-pca9541.
+
+config I2C_MUX_PCA954x
+ tristate "NXP PCA954x/PCA984x and Maxim MAX735x/MAX736x I2C Mux/switches"
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ If you say yes here you get support for NXP PCA954x/PCA984x
+ and Maxim MAX735x/MAX736x I2C mux/switch devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-pca954x.
+
+config I2C_MUX_PINCTRL
+ tristate "pinctrl-based I2C multiplexer"
+ depends on PINCTRL
+ depends on OF
+ help
+ If you say yes to this option, support will be included for an I2C
+ multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+ This is useful for SoCs whose I2C module's signals can be routed to
+ different sets of pins at run-time.
+
+ This driver can also be built as a module. If so, the module will be
+ called i2c-mux-pinctrl.
+
+config I2C_MUX_REG
+ tristate "Register-based I2C multiplexer"
+ depends on HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for a
+ register based I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which is controlled
+ by a single register.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-reg.
+
+config I2C_DEMUX_PINCTRL
+ tristate "pinctrl-based I2C demultiplexer"
+ depends on PINCTRL && OF
+ select OF_DYNAMIC
+ help
+ If you say yes to this option, support will be included for an I2C
+ demultiplexer that uses the pinctrl subsystem. This is useful if you
+ want to change the I2C master at run-time depending on features.
+
+config I2C_MUX_MLXCPLD
+ tristate "Mellanox CPLD based I2C multiplexer"
+ help
+ If you say yes to this option, support will be included for a
+ CPLD based I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which is controlled
+ by a CPLD register.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-mlxcpld.
+
+endmenu