Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 81 insertions, 10 deletions

diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
index 3dda00f1df..4c6ed1d58c 100644
--- a/drivers/i2c/muxes/i2c-mux-mlxcpld.c
+++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -187,7 +187,7 @@ static struct platform_driver mlxcpld_mux_driver = {
 
 module_platform_driver(mlxcpld_mux_driver);
 
-MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
+MODULE_AUTHOR("Michael Shych <michaels@mellanox.com>");
 MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("platform:i2c-mux-mlxcpld");
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 2219062104..c3f4ff08ac 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
 #include <linux/pm.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/mux/mux.h>
@@ -57,6 +58,20 @@
 
 #define PCA954X_IRQ_OFFSET 4
 
+/*
+ * MAX7357's configuration register is writeable after POR, but
+ * can be locked by setting the basic mode bit. MAX7358 configuration
+ * register is locked by default and needs to be unlocked first.
+ * The configuration register holds the following settings:
+ */
+#define MAX7357_CONF_INT_ENABLE			BIT(0)
+#define MAX7357_CONF_FLUSH_OUT			BIT(1)
+#define MAX7357_CONF_RELEASE_INT		BIT(2)
+#define MAX7357_CONF_DISCON_SINGLE_CHAN		BIT(4)
+#define MAX7357_CONF_PRECONNECT_TEST		BIT(7)
+
+#define MAX7357_POR_DEFAULT_CONF		MAX7357_CONF_INT_ENABLE
+
 enum pca_type {
 	max_7356,
 	max_7357,
@@ -102,6 +117,9 @@ struct pca954x {
 	unsigned int irq_mask;
 	raw_spinlock_t lock;
 	struct regulator *supply;
+
+	struct gpio_desc *reset_gpio;
+	struct reset_control *reset_cont;
 };
 
 /* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -470,13 +488,69 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data)
 	else
 		data->last_chan = 0; /* Disconnect multiplexer */
 
-	ret = i2c_smbus_write_byte(client, data->last_chan);
+	if (device_is_compatible(&client->dev, "maxim,max7357")) {
+		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+			u8 conf = MAX7357_POR_DEFAULT_CONF;
+			/*
+			 * The interrupt signal is shared with the reset pin. Release the
+			 * interrupt after 1.6 seconds to allow using the pin as reset.
+			 */
+			conf |= MAX7357_CONF_RELEASE_INT;
+
+			if (device_property_read_bool(&client->dev, "maxim,isolate-stuck-channel"))
+				conf |= MAX7357_CONF_DISCON_SINGLE_CHAN;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,send-flush-out-sequence"))
+				conf |= MAX7357_CONF_FLUSH_OUT;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,preconnection-wiggle-test-enable"))
+				conf |= MAX7357_CONF_PRECONNECT_TEST;
+
+			ret = i2c_smbus_write_byte_data(client, data->last_chan, conf);
+		} else {
+			dev_warn(&client->dev, "Write byte data not supported."
+				 "Cannot enable enhanced mode features\n");
+			ret = i2c_smbus_write_byte(client, data->last_chan);
+		}
+	} else {
+		ret = i2c_smbus_write_byte(client, data->last_chan);
+	}
+
 	if (ret < 0)
 		data->last_chan = 0;
 
 	return ret;
 }
 
+static int pca954x_get_reset(struct device *dev, struct pca954x *data)
+{
+	data->reset_cont = devm_reset_control_get_optional_shared(dev, NULL);
+	if (IS_ERR(data->reset_cont))
+		return dev_err_probe(dev, PTR_ERR(data->reset_cont),
+				     "Failed to get reset\n");
+	else if (data->reset_cont)
+		return 0;
+
+	/*
+	 * fallback to legacy reset-gpios
+	 */
+	data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio)) {
+		return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+				     "Failed to get reset gpio");
+	}
+
+	return 0;
+}
+
+static void pca954x_reset_deassert(struct pca954x *data)
+{
+	if (data->reset_cont)
+		reset_control_deassert(data->reset_cont);
+	else
+		gpiod_set_value_cansleep(data->reset_gpio, 0);
+}
+
 /*
  * I2C init/probing/exit functions
  */
@@ -485,7 +559,6 @@ static int pca954x_probe(struct i2c_client *client)
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
-	struct gpio_desc *gpio;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
 	int num;
@@ -513,15 +586,13 @@ static int pca954x_probe(struct i2c_client *client)
 		return dev_err_probe(dev, ret,
 				     "Failed to enable vdd supply\n");
 
-	/* Reset the mux if a reset GPIO is specified. */
-	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio)) {
-		ret = PTR_ERR(gpio);
+	ret = pca954x_get_reset(dev, data);
+	if (ret)
 		goto fail_cleanup;
-	}
-	if (gpio) {
+
+	if (data->reset_cont || data->reset_gpio) {
 		udelay(1);
-		gpiod_set_value_cansleep(gpio, 0);
+		pca954x_reset_deassert(data);
 		/* Give the chip some time to recover. */
 		udelay(1);
 	}