Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

26 files changed, 992 insertions, 793 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 28eb48dd5b..97989c9142 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1235,7 +1235,7 @@ config I2C_RCAR
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
 	select I2C_SMBUS
-	select RESET_CONTROLLER if ARCH_RCAR_GEN3
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3 || ARCH_RCAR_GEN4
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
diff --git a/drivers/i2c/busses/i2c-at91-slave.c b/drivers/i2c/busses/i2c-at91-slave.c
index d6eeea5166..131a67d9d4 100644
--- a/drivers/i2c/busses/i2c-at91-slave.c
+++ b/drivers/i2c/busses/i2c-at91-slave.c
@@ -106,8 +106,7 @@ static int at91_unreg_slave(struct i2c_client *slave)
 
 static u32 at91_twi_func(struct i2c_adapter *adapter)
 {
-	return I2C_FUNC_SLAVE | I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
-		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+	return I2C_FUNC_SLAVE;
 }
 
 static const struct i2c_algorithm at91_twi_algorithm_slave = {
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index de3f58b60d..2fce3e84ba 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -633,6 +633,7 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
 
 	if (hold_clear) {
 		ctrl_reg &= ~CDNS_I2C_CR_HOLD;
+		ctrl_reg &= ~CDNS_I2C_CR_CLR_FIFO;
 		/*
 		 * In case of Xilinx Zynq SOC, clear the HOLD bit before transfer size
 		 * register reaches '0'. This is an IP bug which causes transfer size
@@ -1176,6 +1177,18 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_suspend(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&xi2c->adap);
+
+	if (!pm_runtime_status_suspended(dev))
+		return cdns_i2c_runtime_suspend(dev);
+
+	return 0;
+}
+
 /**
  * cdns_i2c_init -  Controller initialisation
  * @id:		Device private data structure
@@ -1219,7 +1232,28 @@ static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_resume(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+	int err;
+
+	err = cdns_i2c_runtime_resume(dev);
+	if (err)
+		return err;
+
+	if (pm_runtime_status_suspended(dev)) {
+		err = cdns_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
+
+	i2c_mark_adapter_resumed(&xi2c->adap);
+
+	return 0;
+}
+
 static const struct dev_pm_ops cdns_i2c_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(cdns_i2c_suspend, cdns_i2c_resume)
 	SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
 			   cdns_i2c_runtime_resume, NULL)
 };
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 35f762872b..e8a688d04a 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -648,7 +648,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	__i2c_dw_disable(dev);
 
 	/* Disable all interrupts */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 
 	i2c_dw_release_lock(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index ae835000fd..e9606c00b8 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -212,6 +212,7 @@ struct reset_control;
  * @msg_err: error status of the current transfer
  * @status: i2c master status, one of STATUS_*
  * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @sw_mask: SW mask of DW_IC_INTR_MASK used in polling mode
  * @irq: interrupt number for the i2c master
  * @flags: platform specific flags like type of IO accessors or model
  * @adapter: i2c subsystem adapter node
@@ -270,6 +271,7 @@ struct dw_i2c_dev {
 	int			msg_err;
 	unsigned int		status;
 	unsigned int		abort_source;
+	unsigned int		sw_mask;
 	int			irq;
 	u32			flags;
 	struct i2c_adapter	adapter;
@@ -303,6 +305,7 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK			BIT(0)
 #define ACCESS_NO_IRQ_SUSPEND			BIT(1)
 #define ARBITRATION_SEMAPHORE			BIT(2)
+#define ACCESS_POLLING				BIT(3)
 
 #define MODEL_MSCC_OCELOT			BIT(8)
 #define MODEL_BAIKAL_BT1			BIT(9)
@@ -351,6 +354,24 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 	dev->status &= ~STATUS_ACTIVE;
 }
 
+static inline void __i2c_dw_write_intr_mask(struct dw_i2c_dev *dev,
+					    unsigned int intr_mask)
+{
+	unsigned int val = dev->flags & ACCESS_POLLING ? 0 : intr_mask;
+
+	regmap_write(dev->map, DW_IC_INTR_MASK, val);
+	dev->sw_mask = intr_mask;
+}
+
+static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev,
+					   unsigned int *intr_mask)
+{
+	if (!(dev->flags & ACCESS_POLLING))
+		regmap_read(dev->map, DW_IC_INTR_MASK, intr_mask);
+	else
+		*intr_mask = dev->sw_mask;
+}
+
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
 
 extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 85dbd0eb53..c7e5600280 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -240,7 +240,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 		     msgs[dev->msg_write_idx].addr | ic_tar);
 
 	/* Enforce disabled interrupts (due to HW issues) */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 
 	/* Enable the adapter */
 	__i2c_dw_enable(dev);
@@ -250,7 +250,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 
 	/* Clear and enable interrupts */
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
-	regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
+	__i2c_dw_write_intr_mask(dev, DW_IC_INTR_MASTER_MASK);
 }
 
 static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
@@ -300,7 +300,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	dev->msgs = msgs;
 	dev->msgs_num = num_msgs;
 	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 
 	/* Initiate messages read/write transaction */
 	for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
@@ -355,68 +354,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	return 0;
 }
 
-static int i2c_dw_poll_tx_empty(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_TX_EMPTY,
-					100, 1000);
-}
-
-static int i2c_dw_poll_rx_full(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_RX_FULL,
-					100, 1000);
-}
-
-static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
-				   int num_msgs)
-{
-	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
-	int msg_idx, buf_len, data_idx, ret;
-	unsigned int val, stop = 0;
-	u8 *buf;
-
-	dev->msgs = msgs;
-	dev->msgs_num = num_msgs;
-	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-
-	for (msg_idx = 0; msg_idx < num_msgs; msg_idx++) {
-		buf = msgs[msg_idx].buf;
-		buf_len = msgs[msg_idx].len;
-
-		for (data_idx = 0; data_idx < buf_len; data_idx++) {
-			if (msg_idx == num_msgs - 1 && data_idx == buf_len - 1)
-				stop |= BIT(9);
-
-			if (msgs[msg_idx].flags & I2C_M_RD) {
-				regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | stop);
-
-				ret = i2c_dw_poll_rx_full(dev);
-				if (ret)
-					return ret;
-
-				regmap_read(dev->map, DW_IC_DATA_CMD, &val);
-				buf[data_idx] = val;
-			} else {
-				ret = i2c_dw_poll_tx_empty(dev);
-				if (ret)
-					return ret;
-
-				regmap_write(dev->map, DW_IC_DATA_CMD,
-					     buf[data_idx] | stop);
-			}
-		}
-	}
-
-	return num_msgs;
-}
-
 /*
  * Initiate (and continue) low level master read/write transaction.
  * This function is only called from i2c_dw_isr, and pumping i2c_msg
@@ -546,7 +483,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 }
 
 static u8
@@ -554,6 +491,7 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 {
 	struct i2c_msg *msgs = dev->msgs;
 	u32 flags = msgs[dev->msg_read_idx].flags;
+	unsigned int intr_mask;
 
 	/*
 	 * Adjust the buffer length and mask the flag
@@ -568,8 +506,9 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 	 * Received buffer length, re-enable TX_EMPTY interrupt
 	 * to resume the SMBUS transaction.
 	 */
-	regmap_update_bits(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_TX_EMPTY,
-			   DW_IC_INTR_TX_EMPTY);
+	__i2c_dw_read_intr_mask(dev, &intr_mask);
+	intr_mask |= DW_IC_INTR_TX_EMPTY;
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 
 	return len;
 }
@@ -633,6 +572,169 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	}
 }
 
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+	unsigned int stat, dummy;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * The unmasked raw version of interrupt status bits is available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	if (!(dev->flags & ACCESS_POLLING)) {
+		regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
+	} else {
+		regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+		stat &= dev->sw_mask;
+	}
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_RX_UNDER)
+		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
+	if (stat & DW_IC_INTR_RX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
+	if (stat & DW_IC_INTR_TX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
+	if (stat & DW_IC_INTR_RD_REQ)
+		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		/*
+		 * The IC_TX_ABRT_SOURCE register is cleared whenever
+		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
+		 */
+		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
+		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
+	}
+	if (stat & DW_IC_INTR_RX_DONE)
+		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
+	if ((stat & DW_IC_INTR_STOP_DET) &&
+	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
+		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
+	if (stat & DW_IC_INTR_START_DET)
+		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
+
+	return stat;
+}
+
+static void i2c_dw_process_transfer(struct dw_i2c_dev *dev, unsigned int stat)
+{
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+		dev->status &= ~STATUS_MASK;
+		dev->rx_outstanding = 0;
+
+		/*
+		 * Anytime TX_ABRT is set, the contents of the tx/rx
+		 * buffers are flushed. Make sure to skip them.
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		goto tx_aborted;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL)
+		i2c_dw_read(dev);
+
+	if (stat & DW_IC_INTR_TX_EMPTY)
+		i2c_dw_xfer_msg(dev);
+
+	/*
+	 * No need to modify or disable the interrupt mask here.
+	 * i2c_dw_xfer_msg() will take care of it according to
+	 * the current transmit status.
+	 */
+
+tx_aborted:
+	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
+	     (dev->rx_outstanding == 0))
+		complete(&dev->cmd_complete);
+	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
+		/* Workaround to trigger pending interrupt */
+		__i2c_dw_read_intr_mask(dev, &stat);
+		__i2c_dw_write_intr_mask(dev, 0);
+		__i2c_dw_write_intr_mask(dev, stat);
+	}
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	unsigned int stat, enabled;
+
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
+		return IRQ_NONE;
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+
+	stat = i2c_dw_read_clear_intrbits(dev);
+
+	if (!(dev->status & STATUS_ACTIVE)) {
+		/*
+		 * Unexpected interrupt in driver point of view. State
+		 * variables are either unset or stale so acknowledge and
+		 * disable interrupts for suppressing further interrupts if
+		 * interrupt really came from this HW (E.g. firmware has left
+		 * the HW active).
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		return IRQ_HANDLED;
+	}
+
+	i2c_dw_process_transfer(dev, stat);
+
+	return IRQ_HANDLED;
+}
+
+static int i2c_dw_wait_transfer(struct dw_i2c_dev *dev)
+{
+	unsigned long timeout = dev->adapter.timeout;
+	unsigned int stat;
+	int ret;
+
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = wait_for_completion_timeout(&dev->cmd_complete, timeout);
+	} else {
+		timeout += jiffies;
+		do {
+			ret = try_wait_for_completion(&dev->cmd_complete);
+			if (ret)
+				break;
+
+			stat = i2c_dw_read_clear_intrbits(dev);
+			if (stat)
+				i2c_dw_process_transfer(dev, stat);
+			else
+				/* Try save some power */
+				usleep_range(3, 25);
+		} while (time_before(jiffies, timeout));
+	}
+
+	return ret ? 0 : -ETIMEDOUT;
+}
+
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
@@ -646,18 +748,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	pm_runtime_get_sync(dev->dev);
 
-	/*
-	 * Initiate I2C message transfer when polling mode is enabled,
-	 * As it is polling based transfer mechanism, which does not support
-	 * interrupt based functionalities of existing DesignWare driver.
-	 */
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_AMD_NAVI_GPU:
 		ret = amd_i2c_dw_xfer_quirk(adap, msgs, num);
 		goto done_nolock;
-	case MODEL_WANGXUN_SP:
-		ret = txgbe_i2c_dw_xfer_quirk(adap, msgs, num);
-		goto done_nolock;
 	default:
 		break;
 	}
@@ -685,12 +779,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* Wait for tx to complete */
-	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
+	ret = i2c_dw_wait_transfer(dev);
+	if (ret) {
 		dev_err(dev->dev, "controller timed out\n");
-		/* i2c_dw_init implicitly disables the adapter */
+		/* i2c_dw_init_master() implicitly disables the adapter */
 		i2c_recover_bus(&dev->adapter);
 		i2c_dw_init_master(dev);
-		ret = -ETIMEDOUT;
 		goto done;
 	}
 
@@ -698,7 +792,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	 * We must disable the adapter before returning and signaling the end
 	 * of the current transfer. Otherwise the hardware might continue
 	 * generating interrupts which in turn causes a race condition with
-	 * the following transfer.  Needs some more investigation if the
+	 * the following transfer. Needs some more investigation if the
 	 * additional interrupts are a hardware bug or this driver doesn't
 	 * handle them correctly yet.
 	 */
@@ -746,132 +840,6 @@ static const struct i2c_adapter_quirks i2c_dw_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 };
 
-static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
-{
-	unsigned int stat, dummy;
-
-	/*
-	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
-	 * The unmasked raw version of interrupt status bits is available
-	 * in the IC_RAW_INTR_STAT register.
-	 *
-	 * That is,
-	 *   stat = readl(IC_INTR_STAT);
-	 * equals to,
-	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
-	 *
-	 * The raw version might be useful for debugging purposes.
-	 */
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
-
-	/*
-	 * Do not use the IC_CLR_INTR register to clear interrupts, or
-	 * you'll miss some interrupts, triggered during the period from
-	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
-	 *
-	 * Instead, use the separately-prepared IC_CLR_* registers.
-	 */
-	if (stat & DW_IC_INTR_RX_UNDER)
-		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
-	if (stat & DW_IC_INTR_RX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
-	if (stat & DW_IC_INTR_TX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
-	if (stat & DW_IC_INTR_RD_REQ)
-		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		/*
-		 * The IC_TX_ABRT_SOURCE register is cleared whenever
-		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
-		 */
-		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
-		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
-	}
-	if (stat & DW_IC_INTR_RX_DONE)
-		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
-	if (stat & DW_IC_INTR_ACTIVITY)
-		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
-	if ((stat & DW_IC_INTR_STOP_DET) &&
-	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
-		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
-	if (stat & DW_IC_INTR_START_DET)
-		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
-	if (stat & DW_IC_INTR_GEN_CALL)
-		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
-
-	return stat;
-}
-
-/*
- * Interrupt service routine. This gets called whenever an I2C master interrupt
- * occurs.
- */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	unsigned int stat, enabled;
-
-	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
-	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
-	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
-		return IRQ_NONE;
-	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
-
-	stat = i2c_dw_read_clear_intrbits(dev);
-
-	if (!(dev->status & STATUS_ACTIVE)) {
-		/*
-		 * Unexpected interrupt in driver point of view. State
-		 * variables are either unset or stale so acknowledge and
-		 * disable interrupts for suppressing further interrupts if
-		 * interrupt really came from this HW (E.g. firmware has left
-		 * the HW active).
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		return IRQ_HANDLED;
-	}
-
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
-		dev->status &= ~STATUS_MASK;
-		dev->rx_outstanding = 0;
-
-		/*
-		 * Anytime TX_ABRT is set, the contents of the tx/rx
-		 * buffers are flushed. Make sure to skip them.
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		goto tx_aborted;
-	}
-
-	if (stat & DW_IC_INTR_RX_FULL)
-		i2c_dw_read(dev);
-
-	if (stat & DW_IC_INTR_TX_EMPTY)
-		i2c_dw_xfer_msg(dev);
-
-	/*
-	 * No need to modify or disable the interrupt mask here.
-	 * i2c_dw_xfer_msg() will take care of it according to
-	 * the current transmit status.
-	 */
-
-tx_aborted:
-	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
-	     (dev->rx_outstanding == 0))
-		complete(&dev->cmd_complete);
-	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
-		/* Workaround to trigger pending interrupt */
-		regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
-	}
-
-	return IRQ_HANDLED;
-}
-
 void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
@@ -953,31 +921,6 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int i2c_dw_poll_adap_quirk(struct dw_i2c_dev *dev)
-{
-	struct i2c_adapter *adap = &dev->adapter;
-	int ret;
-
-	pm_runtime_get_noresume(dev->dev);
-	ret = i2c_add_numbered_adapter(adap);
-	if (ret)
-		dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
-	pm_runtime_put_noidle(dev->dev);
-
-	return ret;
-}
-
-static bool i2c_dw_is_model_poll(struct dw_i2c_dev *dev)
-{
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_AMD_NAVI_GPU:
-	case MODEL_WANGXUN_SP:
-		return true;
-	default:
-		return false;
-	}
-}
-
 int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
@@ -1033,9 +976,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	adap->dev.parent = dev->dev;
 	i2c_set_adapdata(adap, dev);
 
-	if (i2c_dw_is_model_poll(dev))
-		return i2c_dw_poll_adap_quirk(dev);
-
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		irq_flags = IRQF_NO_SUSPEND;
 	} else {
@@ -1046,15 +986,17 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	i2c_dw_release_lock(dev);
 
-	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
-			       dev_name(dev->dev), dev);
-	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
-			dev->irq, ret);
-		return ret;
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+				       irq_flags, dev_name(dev->dev), dev);
+		if (ret) {
+			dev_err(dev->dev, "failure requesting irq %i: %d\n",
+				dev->irq, ret);
+			return ret;
+		}
 	}
 
 	ret = i2c_dw_init_recovery_info(dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 61d7a27aa0..9be9a2658e 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -154,7 +154,7 @@ static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
 
-	dev->flags |= MODEL_AMD_NAVI_GPU;
+	dev->flags |= MODEL_AMD_NAVI_GPU | ACCESS_POLLING;
 	dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 855b698e99..4ab41ba39d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -290,7 +290,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
-		dev->flags = MODEL_WANGXUN_SP;
+		dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 2e079cf20b..78e2c47e3d 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -220,7 +220,7 @@ static const struct i2c_algorithm i2c_dw_algo = {
 
 void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
 {
-	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+	dev->functionality = I2C_FUNC_SLAVE;
 
 	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
 			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index dfad5bad50..975c0b1c44 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -57,6 +57,8 @@
 #define   HISI_I2C_FS_SPK_LEN_CNT	GENMASK(7, 0)
 #define HISI_I2C_HS_SPK_LEN		0x003c
 #define   HISI_I2C_HS_SPK_LEN_CNT	GENMASK(7, 0)
+#define HISI_I2C_TX_INT_CLR		0x0040
+#define   HISI_I2C_TX_AEMPTY_INT		BIT(0)
 #define HISI_I2C_INT_MSTAT		0x0044
 #define HISI_I2C_INT_CLR		0x0048
 #define HISI_I2C_INT_MASK		0x004C
@@ -124,6 +126,11 @@ static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
 	writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
 }
 
+static void hisi_i2c_clear_tx_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+	writel_relaxed(mask, ctlr->iobase + HISI_I2C_TX_INT_CLR);
+}
+
 static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
 {
 	u32 int_err = ctlr->xfer_err, reg;
@@ -168,6 +175,7 @@ static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
 	writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
 
 	hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+	hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 	hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
 
 	return 0;
@@ -266,7 +274,7 @@ static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
 
 static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
 {
-	int max_write = HISI_I2C_TX_FIFO_DEPTH;
+	int max_write = HISI_I2C_TX_FIFO_DEPTH - HISI_I2C_TX_F_AE_THRESH;
 	bool need_restart = false, last_msg;
 	struct i2c_msg *cur_msg;
 	u32 cmd, fifo_state;
@@ -323,6 +331,8 @@ static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
 	 */
 	if (ctlr->msg_tx_idx == ctlr->msg_num)
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_TX_EMPTY);
+
+	hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 }
 
 static irqreturn_t hisi_i2c_irq(int irq, void *context)
@@ -363,6 +373,7 @@ out:
 	if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
 		hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+		hisi_i2c_clear_tx_int(ctlr, HISI_I2C_TX_AEMPTY_INT);
 		complete(ctlr->completion);
 	}
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 274e987e4c..79870dd7a0 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -205,6 +205,8 @@
 #define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
 				 STATUS_ERROR_FLAGS)
 
+#define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1)
+
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS		0x06a3
@@ -328,11 +330,39 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
 	"\t\t  0x10  don't use interrupts\n"
 	"\t\t  0x20  disable SMBus Host Notify ");
 
+static int i801_get_block_len(struct i801_priv *priv)
+{
+	u8 len = inb_p(SMBHSTDAT0(priv));
+
+	if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+		pci_err(priv->pci_dev, "Illegal SMBus block read size %u\n", len);
+		return -EPROTO;
+	}
+
+	return len;
+}
+
+static int i801_check_and_clear_pec_error(struct i801_priv *priv)
+{
+	u8 status;
+
+	if (!(priv->features & FEATURE_SMBUS_PEC))
+		return 0;
+
+	status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+	if (status) {
+		outb_p(status, SMBAUXSTS(priv));
+		return -EBADMSG;
+	}
+
+	return 0;
+}
+
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
 static int i801_check_pre(struct i801_priv *priv)
 {
-	int status;
+	int status, result;
 
 	status = inb_p(SMBHSTSTS(priv));
 	if (status & SMBHSTSTS_HOST_BUSY) {
@@ -353,13 +383,9 @@ static int i801_check_pre(struct i801_priv *priv)
 	 * the hardware was already in this state when the driver
 	 * started.
 	 */
-	if (priv->features & FEATURE_SMBUS_PEC) {
-		status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
-		if (status) {
-			pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status);
-			outb_p(status, SMBAUXSTS(priv));
-		}
-	}
+	result = i801_check_and_clear_pec_error(priv);
+	if (result)
+		pci_dbg(priv->pci_dev, "Clearing aux status flag CRCE\n");
 
 	return 0;
 }
@@ -408,14 +434,12 @@ static int i801_check_post(struct i801_priv *priv, int status)
 		 * bit is harmless as long as it's cleared before
 		 * the next operation.
 		 */
-		if ((priv->features & FEATURE_SMBUS_PEC) &&
-		    (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
-			outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
-			result = -EBADMSG;
-			dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+		result = i801_check_and_clear_pec_error(priv);
+		if (result) {
+			pci_dbg(priv->pci_dev, "PEC error\n");
 		} else {
 			result = -ENXIO;
-			dev_dbg(&priv->pci_dev->dev, "No response\n");
+			pci_dbg(priv->pci_dev, "No response\n");
 		}
 	}
 	if (status & SMBHSTSTS_BUS_ERR) {
@@ -512,9 +536,9 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 
 	if (read_write == I2C_SMBUS_READ ||
 	    command == I2C_SMBUS_BLOCK_PROC_CALL) {
-		len = inb_p(SMBHSTDAT0(priv));
-		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
-			status = -EPROTO;
+		len = i801_get_block_len(priv);
+		if (len < 0) {
+			status = len;
 			goto out;
 		}
 
@@ -531,17 +555,17 @@ out:
 static void i801_isr_byte_done(struct i801_priv *priv)
 {
 	if (priv->is_read) {
-		/* For SMBus block reads, length is received with first byte */
-		if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
-		    (priv->count == 0)) {
-			priv->len = inb_p(SMBHSTDAT0(priv));
-			if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
-				dev_err(&priv->pci_dev->dev,
-					"Illegal SMBus block read size %d\n",
-					priv->len);
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (priv->len == SMBUS_LEN_SENTINEL) {
+			priv->len = i801_get_block_len(priv);
+			if (priv->len < 0)
 				/* FIXME: Recover */
 				priv->len = I2C_SMBUS_BLOCK_MAX;
-			}
+
 			priv->data[-1] = priv->len;
 		}
 
@@ -688,13 +712,14 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		if (status)
 			return status;
 
-		if (i == 1 && read_write == I2C_SMBUS_READ
-		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
-			len = inb_p(SMBHSTDAT0(priv));
-			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
-				dev_err(&priv->pci_dev->dev,
-					"Illegal SMBus block read size %d\n",
-					len);
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (len == SMBUS_LEN_SENTINEL) {
+			len = i801_get_block_len(priv);
+			if (len < 0) {
 				/* Recover */
 				while (inb_p(SMBHSTSTS(priv)) &
 				       SMBHSTSTS_HOST_BUSY)
@@ -792,77 +817,66 @@ static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data
 	return 0;
 }
 
-/* Block transaction function */
-static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
-				  u8 addr, u8 hstcmd, char read_write, int command)
+static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+					u8 addr, u8 hstcmd, char read_write, int command)
 {
-	int result = 0;
-	unsigned char hostc;
-
 	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
-		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+		/* Mark block length as invalid */
+		data->block[0] = SMBUS_LEN_SENTINEL;
 	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
 		return -EPROTO;
 
-	switch (command) {
-	case I2C_SMBUS_BLOCK_DATA:
-		i801_set_hstadd(priv, addr, read_write);
-		outb_p(hstcmd, SMBHSTCMD(priv));
-		break;
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		/*
-		 * NB: page 240 of ICH5 datasheet shows that the R/#W
-		 * bit should be cleared here, even when reading.
-		 * However if SPD Write Disable is set (Lynx Point and later),
-		 * the read will fail if we don't set the R/#W bit.
-		 */
-		i801_set_hstadd(priv, addr,
-				priv->original_hstcfg & SMBHSTCFG_SPD_WD ?
-				read_write : I2C_SMBUS_WRITE);
-		if (read_write == I2C_SMBUS_READ) {
-			/* NB: page 240 of ICH5 datasheet also shows
-			 * that DATA1 is the cmd field when reading
-			 */
-			outb_p(hstcmd, SMBHSTDAT1(priv));
-		} else
-			outb_p(hstcmd, SMBHSTCMD(priv));
-
-		if (read_write == I2C_SMBUS_WRITE) {
-			/* set I2C_EN bit in configuration register */
-			pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
-			pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
-					      hostc | SMBHSTCFG_I2C_EN);
-		} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
-			dev_err(&priv->pci_dev->dev,
-				"I2C block read is unsupported!\n");
-			return -EOPNOTSUPP;
-		}
-		break;
-	case I2C_SMBUS_BLOCK_PROC_CALL:
+	if (command == I2C_SMBUS_BLOCK_PROC_CALL)
 		/* Needs to be flagged as write transaction */
 		i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
+	else
+		i801_set_hstadd(priv, addr, read_write);
+	outb_p(hstcmd, SMBHSTCMD(priv));
+
+	if (priv->features & FEATURE_BLOCK_BUFFER)
+		return i801_block_transaction_by_block(priv, data, read_write, command);
+	else
+		return i801_block_transaction_byte_by_byte(priv, data, read_write, command);
+}
+
+static int i801_i2c_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+				      u8 addr, u8 hstcmd, char read_write, int command)
+{
+	int result;
+	u8 hostc;
+
+	if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+		return -EPROTO;
+	/*
+	 * NB: page 240 of ICH5 datasheet shows that the R/#W bit should be cleared here,
+	 * even when reading. However if SPD Write Disable is set (Lynx Point and later),
+	 * the read will fail if we don't set the R/#W bit.
+	 */
+	i801_set_hstadd(priv, addr,
+			priv->original_hstcfg & SMBHSTCFG_SPD_WD ? read_write : I2C_SMBUS_WRITE);
+
+	/* NB: page 240 of ICH5 datasheet shows that DATA1 is the cmd field when reading */
+	if (read_write == I2C_SMBUS_READ)
+		outb_p(hstcmd, SMBHSTDAT1(priv));
+	else
 		outb_p(hstcmd, SMBHSTCMD(priv));
-		break;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		/* set I2C_EN bit in configuration register */
+		pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
+	} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+		pci_err(priv->pci_dev, "I2C block read is unsupported!\n");
+		return -EOPNOTSUPP;
 	}
 
-	/* Experience has shown that the block buffer can only be used for
-	   SMBus (not I2C) block transactions, even though the datasheet
-	   doesn't mention this limitation. */
-	if ((priv->features & FEATURE_BLOCK_BUFFER) &&
-	    command != I2C_SMBUS_I2C_BLOCK_DATA)
-		result = i801_block_transaction_by_block(priv, data,
-							 read_write,
-							 command);
-	else
-		result = i801_block_transaction_byte_by_byte(priv, data,
-							     read_write,
-							     command);
+	/* Block buffer isn't supported for I2C block transactions */
+	result = i801_block_transaction_byte_by_byte(priv, data, read_write, command);
 
-	if (command == I2C_SMBUS_I2C_BLOCK_DATA
-	 && read_write == I2C_SMBUS_WRITE) {
-		/* restore saved configuration register value */
+	/* restore saved configuration register value */
+	if (read_write == I2C_SMBUS_WRITE)
 		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
-	}
+
 	return result;
 }
 
@@ -893,10 +907,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 		outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
 		       SMBAUXCTL(priv));
 
-	if (size == I2C_SMBUS_BLOCK_DATA ||
-	    size == I2C_SMBUS_I2C_BLOCK_DATA ||
-	    size == I2C_SMBUS_BLOCK_PROC_CALL)
-		ret = i801_block_transaction(priv, data, addr, command, read_write, size);
+	if (size == I2C_SMBUS_BLOCK_DATA || size == I2C_SMBUS_BLOCK_PROC_CALL)
+		ret = i801_smbus_block_transaction(priv, data, addr, command, read_write, size);
+	else if (size == I2C_SMBUS_I2C_BLOCK_DATA)
+		ret = i801_i2c_block_transaction(priv, data, addr, command, read_write, size);
 	else
 		ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
 
@@ -969,11 +983,10 @@ static const struct i2c_algorithm smbus_algorithm = {
 	.functionality	= i801_func,
 };
 
-#define FEATURES_ICH5	(FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ	| \
-			 FEATURE_IRQ | FEATURE_SMBUS_PEC		| \
-			 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY)
 #define FEATURES_ICH4	(FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
 			 FEATURE_HOST_NOTIFY)
+#define FEATURES_ICH5	(FEATURES_ICH4 | FEATURE_BLOCK_PROC | \
+			 FEATURE_I2C_BLOCK_READ | FEATURE_IRQ)
 
 static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, 82801AA_3,			0)				 },
@@ -1117,7 +1130,7 @@ static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
 {
 	int i, count;
 
-	if (dm->type != 10)
+	if (dm->type != DMI_ENTRY_ONBOARD_DEVICE)
 		return;
 
 	count = (dm->length - sizeof(struct dmi_header)) / 2;
@@ -1447,8 +1460,7 @@ static inline void i801_del_mux(struct i801_priv *priv) { }
 #endif
 
 static struct platform_device *
-i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
-		 struct resource *tco_res)
+i801_add_tco_spt(struct pci_dev *pci_dev, struct resource *tco_res)
 {
 	static const struct itco_wdt_platform_data pldata = {
 		.name = "Intel PCH",
@@ -1479,8 +1491,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 }
 
 static struct platform_device *
-i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
-		 struct resource *tco_res)
+i801_add_tco_cnl(struct pci_dev *pci_dev, struct resource *tco_res)
 {
 	static const struct itco_wdt_platform_data pldata = {
 		.name = "Intel PCH",
@@ -1520,9 +1531,9 @@ static void i801_add_tco(struct i801_priv *priv)
 	res->flags = IORESOURCE_IO;
 
 	if (priv->features & FEATURE_TCO_CNL)
-		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+		priv->tco_pdev = i801_add_tco_cnl(pci_dev, tco_res);
 	else
-		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+		priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res);
 
 	if (IS_ERR(priv->tco_pdev))
 		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 678b30e904..36e8f6196a 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -99,6 +99,7 @@ struct lpi2c_imx_struct {
 	__u8			*rx_buf;
 	__u8			*tx_buf;
 	struct completion	complete;
+	unsigned long		rate_per;
 	unsigned int		msglen;
 	unsigned int		delivered;
 	unsigned int		block_data;
@@ -106,6 +107,7 @@ struct lpi2c_imx_struct {
 	unsigned int		txfifosize;
 	unsigned int		rxfifosize;
 	enum lpi2c_imx_mode	mode;
+	struct i2c_bus_recovery_info rinfo;
 };
 
 static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
@@ -133,6 +135,8 @@ static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -190,6 +194,8 @@ static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			break;
 		}
 		schedule();
@@ -207,9 +213,7 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 
 	lpi2c_imx_set_mode(lpi2c_imx);
 
-	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
-	if (!clk_rate)
-		return -EINVAL;
+	clk_rate = lpi2c_imx->rate_per;
 
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
@@ -325,6 +329,8 @@ static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -526,6 +532,20 @@ static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int lpi2c_imx_init_recovery_info(struct lpi2c_imx_struct *lpi2c_imx,
+				  struct platform_device *pdev)
+{
+	struct i2c_bus_recovery_info *bri = &lpi2c_imx->rinfo;
+
+	bri->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(bri->pinctrl))
+		return PTR_ERR(bri->pinctrl);
+
+	lpi2c_imx->adapter.bus_recovery_info = bri;
+
+	return 0;
+}
+
 static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
@@ -590,6 +610,20 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	/*
+	 * Lock the parent clock rate to avoid getting parent clock upon
+	 * each transfer
+	 */
+	ret = devm_clk_rate_exclusive_get(&pdev->dev, lpi2c_imx->clks[0].clk);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "can't lock I2C peripheral clock rate\n");
+
+	lpi2c_imx->rate_per = clk_get_rate(lpi2c_imx->clks[0].clk);
+	if (!lpi2c_imx->rate_per)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "can't get I2C peripheral clock rate\n");
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
@@ -600,6 +634,12 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
 	lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
 
+	/* Init optional bus recovery function */
+	ret = lpi2c_imx_init_recovery_info(lpi2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
+
 	ret = i2c_add_adapter(&lpi2c_imx->adapter);
 	if (ret)
 		goto rpm_disable;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 60e813137f..3842e52711 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -212,10 +212,6 @@ struct imx_i2c_struct {
 	const struct imx_i2c_hwdata	*hwdata;
 	struct i2c_bus_recovery_info rinfo;
 
-	struct pinctrl *pinctrl;
-	struct pinctrl_state *pinctrl_pins_default;
-	struct pinctrl_state *pinctrl_pins_gpio;
-
 	struct imx_i2c_dma	*dma;
 	struct i2c_client	*slave;
 	enum i2c_slave_event last_slave_event;
@@ -1362,24 +1358,6 @@ static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter,
 	return result;
 }
 
-static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
-{
-	struct imx_i2c_struct *i2c_imx;
-
-	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
-
-	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
-}
-
-static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
-{
-	struct imx_i2c_struct *i2c_imx;
-
-	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
-
-	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
-}
-
 /*
  * We switch SCL and SDA to their GPIO function and do some bitbanging
  * for bus recovery. These alternative pinmux settings can be
@@ -1390,43 +1368,13 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
 static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 		struct platform_device *pdev)
 {
-	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
-
-	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (!i2c_imx->pinctrl) {
-		dev_info(&pdev->dev, "pinctrl unavailable, bus recovery not supported\n");
-		return 0;
-	}
-	if (IS_ERR(i2c_imx->pinctrl)) {
-		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
-		return PTR_ERR(i2c_imx->pinctrl);
-	}
-
-	i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
-			PINCTRL_STATE_DEFAULT);
-	i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
-			"gpio");
-	rinfo->sda_gpiod = devm_gpiod_get_optional(&pdev->dev, "sda", GPIOD_IN);
-	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
-
-	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
-	    PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
-	} else if (IS_ERR(rinfo->sda_gpiod) ||
-		   IS_ERR(rinfo->scl_gpiod) ||
-		   IS_ERR(i2c_imx->pinctrl_pins_default) ||
-		   IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
-		dev_dbg(&pdev->dev, "recovery information incomplete\n");
-		return 0;
-	}
+	struct i2c_bus_recovery_info *bri = &i2c_imx->rinfo;
 
-	dev_dbg(&pdev->dev, "using scl%s for recovery\n",
-		rinfo->sda_gpiod ? ",sda" : "");
+	bri->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(bri->pinctrl))
+		return PTR_ERR(bri->pinctrl);
 
-	rinfo->prepare_recovery = i2c_imx_prepare_recovery;
-	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
-	rinfo->recover_bus = i2c_generic_scl_recovery;
-	i2c_imx->adapter.bus_recovery_info = rinfo;
+	i2c_imx->adapter.bus_recovery_info = bri;
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index e4e4995ab2..8d73c0f405 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -30,8 +30,6 @@
 #include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
-#define DRV_NAME "mpc-i2c"
-
 #define MPC_I2C_CLOCK_LEGACY   0
 #define MPC_I2C_CLOCK_PRESERVE (~0U)
 
@@ -844,16 +842,16 @@ static int fsl_i2c_probe(struct platform_device *op)
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 	}
 
-	/*
-	 * "fsl,timeout" has been marked as deprecated and, to maintain
-	 * backward compatibility, we will only look for it if
-	 * "i2c-scl-clk-low-timeout-us" is not present.
-	 */
+	/* Sadly, we have to support two deprecated bindings here */
 	result = of_property_read_u32(op->dev.of_node,
-				      "i2c-scl-clk-low-timeout-us",
+				      "i2c-transfer-timeout-us",
 				      &mpc_ops.timeout);
 	if (result == -EINVAL)
 		result = of_property_read_u32(op->dev.of_node,
+					      "i2c-scl-clk-low-timeout-us",
+					      &mpc_ops.timeout);
+	if (result == -EINVAL)
+		result = of_property_read_u32(op->dev.of_node,
 					      "fsl,timeout", &mpc_ops.timeout);
 
 	if (!result) {
@@ -960,7 +958,7 @@ static struct platform_driver mpc_i2c_driver = {
 	.probe		= fsl_i2c_probe,
 	.remove_new	= fsl_i2c_remove,
 	.driver = {
-		.name = DRV_NAME,
+		.name = "mpc-i2c",
 		.of_match_table = mpc_i2c_of_match,
 		.pm = &mpc_i2c_pm_ops,
 	},
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index b10574d42b..4f41a3c782 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -6,21 +6,30 @@
  * I2C master mode controller driver, used in Nomadik 8815
  * and Ux500 platforms.
  *
+ * The Mobileye EyeQ5 platform is also supported; it uses
+ * the same Ux500/DB8500 IP block with two quirks:
+ *  - The memory bus only supports 32-bit accesses.
+ *  - A register must be configured for the I2C speed mode;
+ *    it is located in a shared register region called OLB.
+ *
  * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
  * Author: Sachin Verma <sachin.verma@st.com>
  */
-#include <linux/init.h>
-#include <linux/module.h>
 #include <linux/amba/bus.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/pm_runtime.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
 
 #define DRIVER_NAME "nmk-i2c"
 
@@ -42,61 +51,63 @@
 #define I2C_ICR		(0x038)
 
 /* Control registers */
-#define I2C_CR_PE		(0x1 << 0)	/* Peripheral Enable */
-#define I2C_CR_OM		(0x3 << 1)	/* Operating mode */
-#define I2C_CR_SAM		(0x1 << 3)	/* Slave addressing mode */
-#define I2C_CR_SM		(0x3 << 4)	/* Speed mode */
-#define I2C_CR_SGCM		(0x1 << 6)	/* Slave general call mode */
-#define I2C_CR_FTX		(0x1 << 7)	/* Flush Transmit */
-#define I2C_CR_FRX		(0x1 << 8)	/* Flush Receive */
-#define I2C_CR_DMA_TX_EN	(0x1 << 9)	/* DMA Tx enable */
-#define I2C_CR_DMA_RX_EN	(0x1 << 10)	/* DMA Rx Enable */
-#define I2C_CR_DMA_SLE		(0x1 << 11)	/* DMA sync. logic enable */
-#define I2C_CR_LM		(0x1 << 12)	/* Loopback mode */
-#define I2C_CR_FON		(0x3 << 13)	/* Filtering on */
-#define I2C_CR_FS		(0x3 << 15)	/* Force stop enable */
+#define I2C_CR_PE		BIT(0)		/* Peripheral Enable */
+#define I2C_CR_OM		GENMASK(2, 1)	/* Operating mode */
+#define I2C_CR_SAM		BIT(3)		/* Slave addressing mode */
+#define I2C_CR_SM		GENMASK(5, 4)	/* Speed mode */
+#define I2C_CR_SGCM		BIT(6)		/* Slave general call mode */
+#define I2C_CR_FTX		BIT(7)		/* Flush Transmit */
+#define I2C_CR_FRX		BIT(8)		/* Flush Receive */
+#define I2C_CR_DMA_TX_EN	BIT(9)		/* DMA Tx enable */
+#define I2C_CR_DMA_RX_EN	BIT(10)		/* DMA Rx Enable */
+#define I2C_CR_DMA_SLE		BIT(11)		/* DMA sync. logic enable */
+#define I2C_CR_LM		BIT(12)		/* Loopback mode */
+#define I2C_CR_FON		GENMASK(14, 13)	/* Filtering on */
+#define I2C_CR_FS		GENMASK(16, 15)	/* Force stop enable */
+
+/* Slave control register (SCR) */
+#define I2C_SCR_SLSU		GENMASK(31, 16)	/* Slave data setup time */
 
 /* Master controller (MCR) register */
-#define I2C_MCR_OP		(0x1 << 0)	/* Operation */
-#define I2C_MCR_A7		(0x7f << 1)	/* 7-bit address */
-#define I2C_MCR_EA10		(0x7 << 8)	/* 10-bit Extended address */
-#define I2C_MCR_SB		(0x1 << 11)	/* Extended address */
-#define I2C_MCR_AM		(0x3 << 12)	/* Address type */
-#define I2C_MCR_STOP		(0x1 << 14)	/* Stop condition */
-#define I2C_MCR_LENGTH		(0x7ff << 15)	/* Transaction length */
+#define I2C_MCR_OP		BIT(0)		/* Operation */
+#define I2C_MCR_A7		GENMASK(7, 1)	/* 7-bit address */
+#define I2C_MCR_EA10		GENMASK(10, 8)	/* 10-bit Extended address */
+#define I2C_MCR_SB		BIT(11)		/* Extended address */
+#define I2C_MCR_AM		GENMASK(13, 12)	/* Address type */
+#define I2C_MCR_STOP		BIT(14)		/* Stop condition */
+#define I2C_MCR_LENGTH		GENMASK(25, 15)	/* Transaction length */
 
 /* Status register (SR) */
-#define I2C_SR_OP		(0x3 << 0)	/* Operation */
-#define I2C_SR_STATUS		(0x3 << 2)	/* controller status */
-#define I2C_SR_CAUSE		(0x7 << 4)	/* Abort cause */
-#define I2C_SR_TYPE		(0x3 << 7)	/* Receive type */
-#define I2C_SR_LENGTH		(0x7ff << 9)	/* Transfer length */
+#define I2C_SR_OP		GENMASK(1, 0)	/* Operation */
+#define I2C_SR_STATUS		GENMASK(3, 2)	/* controller status */
+#define I2C_SR_CAUSE		GENMASK(6, 4)	/* Abort cause */
+#define I2C_SR_TYPE		GENMASK(8, 7)	/* Receive type */
+#define I2C_SR_LENGTH		GENMASK(19, 9)	/* Transfer length */
+
+/* Baud-rate counter register (BRCR) */
+#define I2C_BRCR_BRCNT1		GENMASK(31, 16)	/* Baud-rate counter 1 */
+#define I2C_BRCR_BRCNT2		GENMASK(15, 0)	/* Baud-rate counter 2 */
 
 /* Interrupt mask set/clear (IMSCR) bits */
-#define I2C_IT_TXFE		(0x1 << 0)
-#define I2C_IT_TXFNE		(0x1 << 1)
-#define I2C_IT_TXFF		(0x1 << 2)
-#define I2C_IT_TXFOVR		(0x1 << 3)
-#define I2C_IT_RXFE		(0x1 << 4)
-#define I2C_IT_RXFNF		(0x1 << 5)
-#define I2C_IT_RXFF		(0x1 << 6)
-#define I2C_IT_RFSR		(0x1 << 16)
-#define I2C_IT_RFSE		(0x1 << 17)
-#define I2C_IT_WTSR		(0x1 << 18)
-#define I2C_IT_MTD		(0x1 << 19)
-#define I2C_IT_STD		(0x1 << 20)
-#define I2C_IT_MAL		(0x1 << 24)
-#define I2C_IT_BERR		(0x1 << 25)
-#define I2C_IT_MTDWS		(0x1 << 28)
-
-#define GEN_MASK(val, mask, sb)  (((val) << (sb)) & (mask))
+#define I2C_IT_TXFE		BIT(0)
+#define I2C_IT_TXFNE		BIT(1)
+#define I2C_IT_TXFF		BIT(2)
+#define I2C_IT_TXFOVR		BIT(3)
+#define I2C_IT_RXFE		BIT(4)
+#define I2C_IT_RXFNF		BIT(5)
+#define I2C_IT_RXFF		BIT(6)
+#define I2C_IT_RFSR		BIT(16)
+#define I2C_IT_RFSE		BIT(17)
+#define I2C_IT_WTSR		BIT(18)
+#define I2C_IT_MTD		BIT(19)
+#define I2C_IT_STD		BIT(20)
+#define I2C_IT_MAL		BIT(24)
+#define I2C_IT_BERR		BIT(25)
+#define I2C_IT_MTDWS		BIT(28)
 
 /* some bits in ICR are reserved */
 #define I2C_CLEAR_ALL_INTS	0x131f007f
 
-/* first three msb bits are reserved */
-#define IRQ_MASK(mask)		(mask & 0x1fffffff)
-
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD	15
 
@@ -107,6 +118,15 @@ enum i2c_freq_mode {
 	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
 };
 
+/* Mobileye EyeQ5 offset into a shared register region (called OLB) */
+#define NMK_I2C_EYEQ5_OLB_IOCR2			0x0B8
+
+enum i2c_eyeq5_speed {
+	I2C_EYEQ5_SPEED_FAST,
+	I2C_EYEQ5_SPEED_FAST_PLUS,
+	I2C_EYEQ5_SPEED_HIGH_SPEED,
+};
+
 /**
  * struct i2c_vendor_data - per-vendor variations
  * @has_mtdws: variant has the MTDWS bit
@@ -131,6 +151,12 @@ enum i2c_operation {
 	I2C_READ = 0x01
 };
 
+enum i2c_operating_mode {
+	I2C_OM_SLAVE,
+	I2C_OM_MASTER,
+	I2C_OM_MASTER_OR_SLAVE,
+};
+
 /**
  * struct i2c_nmk_client - client specific data
  * @slave_adr: 7-bit slave address
@@ -159,11 +185,13 @@ struct i2c_nmk_client {
  * @clk_freq: clock frequency for the operation mode
  * @tft: Tx FIFO Threshold in bytes
  * @rft: Rx FIFO Threshold in bytes
- * @timeout: Slave response timeout (ms)
+ * @timeout_usecs: Slave response timeout
  * @sm: speed mode
  * @stop: stop condition.
- * @xfer_complete: acknowledge completion for a I2C message.
+ * @xfer_wq: xfer done wait queue.
+ * @xfer_done: xfer done boolean.
  * @result: controller propogated result.
+ * @has_32b_bus: controller is on a bus that only supports 32-bit accesses.
  */
 struct nmk_i2c_dev {
 	struct i2c_vendor_data		*vendor;
@@ -176,11 +204,13 @@ struct nmk_i2c_dev {
 	u32				clk_freq;
 	unsigned char			tft;
 	unsigned char			rft;
-	int				timeout;
+	u32				timeout_usecs;
 	enum i2c_freq_mode		sm;
 	int				stop;
-	struct completion		xfer_complete;
+	struct wait_queue_head		xfer_wq;
+	bool				xfer_done;
 	int				result;
+	bool				has_32b_bus;
 };
 
 /* controller's abort causes */
@@ -204,18 +234,36 @@ static inline void i2c_clr_bit(void __iomem *reg, u32 mask)
 	writel(readl(reg) & ~mask, reg);
 }
 
+static inline u8 nmk_i2c_readb(const struct nmk_i2c_dev *priv,
+			       unsigned long reg)
+{
+	if (priv->has_32b_bus)
+		return readl(priv->virtbase + reg);
+	else
+		return readb(priv->virtbase + reg);
+}
+
+static inline void nmk_i2c_writeb(const struct nmk_i2c_dev *priv, u32 val,
+				  unsigned long reg)
+{
+	if (priv->has_32b_bus)
+		writel(val, priv->virtbase + reg);
+	else
+		writeb(val, priv->virtbase + reg);
+}
+
 /**
  * flush_i2c_fifo() - This function flushes the I2C FIFO
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  *
  * This function flushes the I2C Tx and Rx FIFOs. It returns
  * 0 on successful flushing of FIFO
  */
-static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
+static int flush_i2c_fifo(struct nmk_i2c_dev *priv)
 {
 #define LOOP_ATTEMPTS 10
+	ktime_t timeout;
 	int i;
-	unsigned long timeout;
 
 	/*
 	 * flush the transmit and receive FIFO. The flushing
@@ -224,19 +272,19 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
 	 * bits, until then no one must access Tx, Rx FIFO and
 	 * should poll on these bits waiting for the completion.
 	 */
-	writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
+	writel((I2C_CR_FTX | I2C_CR_FRX), priv->virtbase + I2C_CR);
 
 	for (i = 0; i < LOOP_ATTEMPTS; i++) {
-		timeout = jiffies + dev->adap.timeout;
+		timeout = ktime_add_us(ktime_get(), priv->timeout_usecs);
 
-		while (!time_after(jiffies, timeout)) {
-			if ((readl(dev->virtbase + I2C_CR) &
+		while (ktime_after(timeout, ktime_get())) {
+			if ((readl(priv->virtbase + I2C_CR) &
 				(I2C_CR_FTX | I2C_CR_FRX)) == 0)
-					return 0;
+				return 0;
 		}
 	}
 
-	dev_err(&dev->adev->dev,
+	dev_err(&priv->adev->dev,
 		"flushing operation timed out giving up after %d attempts",
 		LOOP_ATTEMPTS);
 
@@ -245,120 +293,121 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
 
 /**
  * disable_all_interrupts() - Disable all interrupts of this I2c Bus
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  */
-static void disable_all_interrupts(struct nmk_i2c_dev *dev)
+static void disable_all_interrupts(struct nmk_i2c_dev *priv)
 {
-	u32 mask = IRQ_MASK(0);
-	writel(mask, dev->virtbase + I2C_IMSCR);
+	writel(0, priv->virtbase + I2C_IMSCR);
 }
 
 /**
  * clear_all_interrupts() - Clear all interrupts of I2C Controller
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  */
-static void clear_all_interrupts(struct nmk_i2c_dev *dev)
+static void clear_all_interrupts(struct nmk_i2c_dev *priv)
 {
-	u32 mask;
-	mask = IRQ_MASK(I2C_CLEAR_ALL_INTS);
-	writel(mask, dev->virtbase + I2C_ICR);
+	writel(I2C_CLEAR_ALL_INTS, priv->virtbase + I2C_ICR);
 }
 
 /**
  * init_hw() - initialize the I2C hardware
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  */
-static int init_hw(struct nmk_i2c_dev *dev)
+static int init_hw(struct nmk_i2c_dev *priv)
 {
 	int stat;
 
-	stat = flush_i2c_fifo(dev);
+	stat = flush_i2c_fifo(priv);
 	if (stat)
 		goto exit;
 
 	/* disable the controller */
-	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+	i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
 
-	disable_all_interrupts(dev);
+	disable_all_interrupts(priv);
 
-	clear_all_interrupts(dev);
+	clear_all_interrupts(priv);
 
-	dev->cli.operation = I2C_NO_OPERATION;
+	priv->cli.operation = I2C_NO_OPERATION;
 
 exit:
 	return stat;
 }
 
 /* enable peripheral, master mode operation */
-#define DEFAULT_I2C_REG_CR	((1 << 1) | I2C_CR_PE)
+#define DEFAULT_I2C_REG_CR	(FIELD_PREP(I2C_CR_OM, I2C_OM_MASTER) | I2C_CR_PE)
+
+/* grab top three bits from extended I2C addresses */
+#define ADR_3MSB_BITS		GENMASK(9, 7)
 
 /**
  * load_i2c_mcr_reg() - load the MCR register
- * @dev: private data of controller
+ * @priv: private data of controller
  * @flags: message flags
  */
-static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
+static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *priv, u16 flags)
 {
 	u32 mcr = 0;
 	unsigned short slave_adr_3msb_bits;
 
-	mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
+	mcr |= FIELD_PREP(I2C_MCR_A7, priv->cli.slave_adr);
 
 	if (unlikely(flags & I2C_M_TEN)) {
 		/* 10-bit address transaction */
-		mcr |= GEN_MASK(2, I2C_MCR_AM, 12);
+		mcr |= FIELD_PREP(I2C_MCR_AM, 2);
 		/*
 		 * Get the top 3 bits.
 		 * EA10 represents extended address in MCR. This includes
 		 * the extension (MSB bits) of the 7 bit address loaded
 		 * in A7
 		 */
-		slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7;
+		slave_adr_3msb_bits = FIELD_GET(ADR_3MSB_BITS,
+						priv->cli.slave_adr);
 
-		mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8);
+		mcr |= FIELD_PREP(I2C_MCR_EA10, slave_adr_3msb_bits);
 	} else {
 		/* 7-bit address transaction */
-		mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
+		mcr |= FIELD_PREP(I2C_MCR_AM, 1);
 	}
 
 	/* start byte procedure not applied */
-	mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
+	mcr |= FIELD_PREP(I2C_MCR_SB, 0);
 
 	/* check the operation, master read/write? */
-	if (dev->cli.operation == I2C_WRITE)
-		mcr |= GEN_MASK(I2C_WRITE, I2C_MCR_OP, 0);
+	if (priv->cli.operation == I2C_WRITE)
+		mcr |= FIELD_PREP(I2C_MCR_OP, I2C_WRITE);
 	else
-		mcr |= GEN_MASK(I2C_READ, I2C_MCR_OP, 0);
+		mcr |= FIELD_PREP(I2C_MCR_OP, I2C_READ);
 
 	/* stop or repeated start? */
-	if (dev->stop)
-		mcr |= GEN_MASK(1, I2C_MCR_STOP, 14);
+	if (priv->stop)
+		mcr |= FIELD_PREP(I2C_MCR_STOP, 1);
 	else
-		mcr &= ~(GEN_MASK(1, I2C_MCR_STOP, 14));
+		mcr &= ~FIELD_PREP(I2C_MCR_STOP, 1);
 
-	mcr |= GEN_MASK(dev->cli.count, I2C_MCR_LENGTH, 15);
+	mcr |= FIELD_PREP(I2C_MCR_LENGTH, priv->cli.count);
 
 	return mcr;
 }
 
 /**
  * setup_i2c_controller() - setup the controller
- * @dev: private data of controller
+ * @priv: private data of controller
  */
-static void setup_i2c_controller(struct nmk_i2c_dev *dev)
+static void setup_i2c_controller(struct nmk_i2c_dev *priv)
 {
 	u32 brcr1, brcr2;
 	u32 i2c_clk, div;
 	u32 ns;
 	u16 slsu;
 
-	writel(0x0, dev->virtbase + I2C_CR);
-	writel(0x0, dev->virtbase + I2C_HSMCR);
-	writel(0x0, dev->virtbase + I2C_TFTR);
-	writel(0x0, dev->virtbase + I2C_RFTR);
-	writel(0x0, dev->virtbase + I2C_DMAR);
+	writel(0x0, priv->virtbase + I2C_CR);
+	writel(0x0, priv->virtbase + I2C_HSMCR);
+	writel(0x0, priv->virtbase + I2C_TFTR);
+	writel(0x0, priv->virtbase + I2C_RFTR);
+	writel(0x0, priv->virtbase + I2C_DMAR);
 
-	i2c_clk = clk_get_rate(dev->clk);
+	i2c_clk = clk_get_rate(priv->clk);
 
 	/*
 	 * set the slsu:
@@ -373,7 +422,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * slsu = cycles / (1000000000 / f) + 1
 	 */
 	ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
-	switch (dev->sm) {
+	switch (priv->sm) {
 	case I2C_FREQ_MODE_FAST:
 	case I2C_FREQ_MODE_FAST_PLUS:
 		slsu = DIV_ROUND_UP(100, ns); /* Fast */
@@ -388,15 +437,15 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	}
 	slsu += 1;
 
-	dev_dbg(&dev->adev->dev, "calculated SLSU = %04x\n", slsu);
-	writel(slsu << 16, dev->virtbase + I2C_SCR);
+	dev_dbg(&priv->adev->dev, "calculated SLSU = %04x\n", slsu);
+	writel(FIELD_PREP(I2C_SCR_SLSU, slsu), priv->virtbase + I2C_SCR);
 
 	/*
 	 * The spec says, in case of std. mode the divider is
 	 * 2 whereas it is 3 for fast and fastplus mode of
 	 * operation. TODO - high speed support.
 	 */
-	div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
+	div = (priv->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
 
 	/*
 	 * generate the mask for baud rate counters. The controller
@@ -405,11 +454,11 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * plus operation. Currently we do not supprt high speed mode
 	 * so set brcr1 to 0.
 	 */
-	brcr1 = 0 << 16;
-	brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
+	brcr1 = FIELD_PREP(I2C_BRCR_BRCNT1, 0);
+	brcr2 = FIELD_PREP(I2C_BRCR_BRCNT2, i2c_clk / (priv->clk_freq * div));
 
 	/* set the baud rate counter register */
-	writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+	writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR);
 
 	/*
 	 * set the speed mode. Currently we support
@@ -417,125 +466,142 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * TODO - support for fast mode plus (up to 1Mb/s)
 	 * and high speed (up to 3.4 Mb/s)
 	 */
-	if (dev->sm > I2C_FREQ_MODE_FAST) {
-		dev_err(&dev->adev->dev,
+	if (priv->sm > I2C_FREQ_MODE_FAST) {
+		dev_err(&priv->adev->dev,
 			"do not support this mode defaulting to std. mode\n");
-		brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
-		writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
-		writel(I2C_FREQ_MODE_STANDARD << 4,
-				dev->virtbase + I2C_CR);
+		brcr2 = FIELD_PREP(I2C_BRCR_BRCNT2,
+				   i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2));
+		writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR);
+		writel(FIELD_PREP(I2C_CR_SM, I2C_FREQ_MODE_STANDARD),
+		       priv->virtbase + I2C_CR);
 	}
-	writel(dev->sm << 4, dev->virtbase + I2C_CR);
+	writel(FIELD_PREP(I2C_CR_SM, priv->sm), priv->virtbase + I2C_CR);
 
 	/* set the Tx and Rx FIFO threshold */
-	writel(dev->tft, dev->virtbase + I2C_TFTR);
-	writel(dev->rft, dev->virtbase + I2C_RFTR);
+	writel(priv->tft, priv->virtbase + I2C_TFTR);
+	writel(priv->rft, priv->virtbase + I2C_RFTR);
+}
+
+static bool nmk_i2c_wait_xfer_done(struct nmk_i2c_dev *priv)
+{
+	if (priv->timeout_usecs < jiffies_to_usecs(1)) {
+		unsigned long timeout_usecs = priv->timeout_usecs;
+		ktime_t timeout = ktime_set(0, timeout_usecs * NSEC_PER_USEC);
+
+		wait_event_hrtimeout(priv->xfer_wq, priv->xfer_done, timeout);
+	} else {
+		unsigned long timeout = usecs_to_jiffies(priv->timeout_usecs);
+
+		wait_event_timeout(priv->xfer_wq, priv->xfer_done, timeout);
+	}
+
+	return priv->xfer_done;
 }
 
 /**
  * read_i2c() - Read from I2C client device
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  * @flags: message flags
  *
  * This function reads from i2c client device when controller is in
  * master mode. There is a completion timeout. If there is no transfer
  * before timeout error is returned.
  */
-static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
+static int read_i2c(struct nmk_i2c_dev *priv, u16 flags)
 {
-	int status = 0;
 	u32 mcr, irq_mask;
-	unsigned long timeout;
+	int status = 0;
+	bool xfer_done;
 
-	mcr = load_i2c_mcr_reg(dev, flags);
-	writel(mcr, dev->virtbase + I2C_MCR);
+	mcr = load_i2c_mcr_reg(priv, flags);
+	writel(mcr, priv->virtbase + I2C_MCR);
 
 	/* load the current CR value */
-	writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
-			dev->virtbase + I2C_CR);
+	writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+	       priv->virtbase + I2C_CR);
 
 	/* enable the controller */
-	i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+	i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
 
-	init_completion(&dev->xfer_complete);
+	init_waitqueue_head(&priv->xfer_wq);
+	priv->xfer_done = false;
 
 	/* enable interrupts by setting the mask */
 	irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
 			I2C_IT_MAL | I2C_IT_BERR);
 
-	if (dev->stop || !dev->vendor->has_mtdws)
+	if (priv->stop || !priv->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
 
-	irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+	irq_mask &= I2C_CLEAR_ALL_INTS;
 
-	writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
-			dev->virtbase + I2C_IMSCR);
+	writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask,
+	       priv->virtbase + I2C_IMSCR);
 
-	timeout = wait_for_completion_timeout(
-		&dev->xfer_complete, dev->adap.timeout);
+	xfer_done = nmk_i2c_wait_xfer_done(priv);
 
-	if (timeout == 0) {
+	if (!xfer_done) {
 		/* Controller timed out */
-		dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
-				dev->cli.slave_adr);
+		dev_err(&priv->adev->dev, "read from slave 0x%x timed out\n",
+			priv->cli.slave_adr);
 		status = -ETIMEDOUT;
 	}
 	return status;
 }
 
-static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+static void fill_tx_fifo(struct nmk_i2c_dev *priv, int no_bytes)
 {
 	int count;
 
 	for (count = (no_bytes - 2);
 			(count > 0) &&
-			(dev->cli.count != 0);
+			(priv->cli.count != 0);
 			count--) {
 		/* write to the Tx FIFO */
-		writeb(*dev->cli.buffer,
-			dev->virtbase + I2C_TFR);
-		dev->cli.buffer++;
-		dev->cli.count--;
-		dev->cli.xfer_bytes++;
+		nmk_i2c_writeb(priv, *priv->cli.buffer, I2C_TFR);
+		priv->cli.buffer++;
+		priv->cli.count--;
+		priv->cli.xfer_bytes++;
 	}
 
 }
 
 /**
  * write_i2c() - Write data to I2C client.
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
  * @flags: message flags
  *
  * This function writes data to I2C client
  */
-static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
+static int write_i2c(struct nmk_i2c_dev *priv, u16 flags)
 {
-	u32 status = 0;
 	u32 mcr, irq_mask;
-	unsigned long timeout;
+	u32 status = 0;
+	bool xfer_done;
 
-	mcr = load_i2c_mcr_reg(dev, flags);
+	mcr = load_i2c_mcr_reg(priv, flags);
 
-	writel(mcr, dev->virtbase + I2C_MCR);
+	writel(mcr, priv->virtbase + I2C_MCR);
 
 	/* load the current CR value */
-	writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
-			dev->virtbase + I2C_CR);
+	writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+	       priv->virtbase + I2C_CR);
 
 	/* enable the controller */
-	i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+	i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
 
-	init_completion(&dev->xfer_complete);
+	init_waitqueue_head(&priv->xfer_wq);
+	priv->xfer_done = false;
 
 	/* enable interrupts by settings the masks */
 	irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
 
 	/* Fill the TX FIFO with transmit data */
-	fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+	fill_tx_fifo(priv, MAX_I2C_FIFO_THRESHOLD);
 
-	if (dev->cli.count != 0)
+	if (priv->cli.count != 0)
 		irq_mask |= I2C_IT_TXFNE;
 
 	/*
@@ -543,23 +609,22 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
 	 * set the MTDWS bit (Master Transaction Done Without Stop)
 	 * to start repeated start operation
 	 */
-	if (dev->stop || !dev->vendor->has_mtdws)
+	if (priv->stop || !priv->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
 
-	irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+	irq_mask &= I2C_CLEAR_ALL_INTS;
 
-	writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
-			dev->virtbase + I2C_IMSCR);
+	writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask,
+	       priv->virtbase + I2C_IMSCR);
 
-	timeout = wait_for_completion_timeout(
-		&dev->xfer_complete, dev->adap.timeout);
+	xfer_done = nmk_i2c_wait_xfer_done(priv);
 
-	if (timeout == 0) {
+	if (!xfer_done) {
 		/* Controller timed out */
-		dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
-				dev->cli.slave_adr);
+		dev_err(&priv->adev->dev, "write to slave 0x%x timed out\n",
+			priv->cli.slave_adr);
 		status = -ETIMEDOUT;
 	}
 
@@ -568,44 +633,39 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
 
 /**
  * nmk_i2c_xfer_one() - transmit a single I2C message
- * @dev: device with a message encoded into it
+ * @priv: device with a message encoded into it
  * @flags: message flags
  */
-static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *priv, u16 flags)
 {
 	int status;
 
 	if (flags & I2C_M_RD) {
 		/* read operation */
-		dev->cli.operation = I2C_READ;
-		status = read_i2c(dev, flags);
+		priv->cli.operation = I2C_READ;
+		status = read_i2c(priv, flags);
 	} else {
 		/* write operation */
-		dev->cli.operation = I2C_WRITE;
-		status = write_i2c(dev, flags);
+		priv->cli.operation = I2C_WRITE;
+		status = write_i2c(priv, flags);
 	}
 
-	if (status || (dev->result)) {
+	if (status || priv->result) {
 		u32 i2c_sr;
 		u32 cause;
 
-		i2c_sr = readl(dev->virtbase + I2C_SR);
-		/*
-		 * Check if the controller I2C operation status
-		 * is set to ABORT(11b).
-		 */
-		if (((i2c_sr >> 2) & 0x3) == 0x3) {
-			/* get the abort cause */
-			cause =	(i2c_sr >> 4) & 0x7;
-			dev_err(&dev->adev->dev, "%s\n",
+		i2c_sr = readl(priv->virtbase + I2C_SR);
+		if (FIELD_GET(I2C_SR_STATUS, i2c_sr) == I2C_ABORT) {
+			cause = FIELD_GET(I2C_SR_CAUSE, i2c_sr);
+			dev_err(&priv->adev->dev, "%s\n",
 				cause >= ARRAY_SIZE(abort_causes) ?
 				"unknown reason" :
 				abort_causes[cause]);
 		}
 
-		(void) init_hw(dev);
+		init_hw(priv);
 
-		status = status ? status : dev->result;
+		status = status ? status : priv->result;
 	}
 
 	return status;
@@ -663,24 +723,24 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 {
 	int status = 0;
 	int i;
-	struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+	struct nmk_i2c_dev *priv = i2c_get_adapdata(i2c_adap);
 	int j;
 
-	pm_runtime_get_sync(&dev->adev->dev);
+	pm_runtime_get_sync(&priv->adev->dev);
 
 	/* Attempt three times to send the message queue */
 	for (j = 0; j < 3; j++) {
 		/* setup the i2c controller */
-		setup_i2c_controller(dev);
+		setup_i2c_controller(priv);
 
 		for (i = 0; i < num_msgs; i++) {
-			dev->cli.slave_adr	= msgs[i].addr;
-			dev->cli.buffer		= msgs[i].buf;
-			dev->cli.count		= msgs[i].len;
-			dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
-			dev->result = 0;
+			priv->cli.slave_adr	= msgs[i].addr;
+			priv->cli.buffer		= msgs[i].buf;
+			priv->cli.count		= msgs[i].len;
+			priv->stop = (i < (num_msgs - 1)) ? 0 : 1;
+			priv->result = 0;
 
-			status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+			status = nmk_i2c_xfer_one(priv, msgs[i].flags);
 			if (status != 0)
 				break;
 		}
@@ -688,7 +748,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 			break;
 	}
 
-	pm_runtime_put_sync(&dev->adev->dev);
+	pm_runtime_put_sync(&priv->adev->dev);
 
 	/* return the no. messages processed */
 	if (status)
@@ -699,14 +759,14 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 /**
  * disable_interrupts() - disable the interrupts
- * @dev: private data of controller
+ * @priv: private data of controller
  * @irq: interrupt number
  */
-static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
+static int disable_interrupts(struct nmk_i2c_dev *priv, u32 irq)
 {
-	irq = IRQ_MASK(irq);
-	writel(readl(dev->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq),
-			dev->virtbase + I2C_IMSCR);
+	irq &= I2C_CLEAR_ALL_INTS;
+	writel(readl(priv->virtbase + I2C_IMSCR) & ~irq,
+	       priv->virtbase + I2C_IMSCR);
 	return 0;
 }
 
@@ -723,38 +783,39 @@ static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
  */
 static irqreturn_t i2c_irq_handler(int irq, void *arg)
 {
-	struct nmk_i2c_dev *dev = arg;
+	struct nmk_i2c_dev *priv = arg;
+	struct device *dev = &priv->adev->dev;
 	u32 tft, rft;
 	u32 count;
 	u32 misr, src;
 
 	/* load Tx FIFO and Rx FIFO threshold values */
-	tft = readl(dev->virtbase + I2C_TFTR);
-	rft = readl(dev->virtbase + I2C_RFTR);
+	tft = readl(priv->virtbase + I2C_TFTR);
+	rft = readl(priv->virtbase + I2C_RFTR);
 
 	/* read interrupt status register */
-	misr = readl(dev->virtbase + I2C_MISR);
+	misr = readl(priv->virtbase + I2C_MISR);
 
 	src = __ffs(misr);
-	switch ((1 << src)) {
+	switch (BIT(src)) {
 
 	/* Transmit FIFO nearly empty interrupt */
 	case I2C_IT_TXFNE:
 	{
-		if (dev->cli.operation == I2C_READ) {
+		if (priv->cli.operation == I2C_READ) {
 			/*
 			 * in read operation why do we care for writing?
 			 * so disable the Transmit FIFO interrupt
 			 */
-			disable_interrupts(dev, I2C_IT_TXFNE);
+			disable_interrupts(priv, I2C_IT_TXFNE);
 		} else {
-			fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
+			fill_tx_fifo(priv, (MAX_I2C_FIFO_THRESHOLD - tft));
 			/*
 			 * if done, close the transfer by disabling the
 			 * corresponding TXFNE interrupt
 			 */
-			if (dev->cli.count == 0)
-				disable_interrupts(dev,	I2C_IT_TXFNE);
+			if (priv->cli.count == 0)
+				disable_interrupts(priv,	I2C_IT_TXFNE);
 		}
 	}
 	break;
@@ -768,60 +829,63 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	case I2C_IT_RXFNF:
 		for (count = rft; count > 0; count--) {
 			/* Read the Rx FIFO */
-			*dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
-			dev->cli.buffer++;
+			*priv->cli.buffer = nmk_i2c_readb(priv, I2C_RFR);
+			priv->cli.buffer++;
 		}
-		dev->cli.count -= rft;
-		dev->cli.xfer_bytes += rft;
+		priv->cli.count -= rft;
+		priv->cli.xfer_bytes += rft;
 		break;
 
 	/* Rx FIFO full */
 	case I2C_IT_RXFF:
 		for (count = MAX_I2C_FIFO_THRESHOLD; count > 0; count--) {
-			*dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
-			dev->cli.buffer++;
+			*priv->cli.buffer = nmk_i2c_readb(priv, I2C_RFR);
+			priv->cli.buffer++;
 		}
-		dev->cli.count -= MAX_I2C_FIFO_THRESHOLD;
-		dev->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
+		priv->cli.count -= MAX_I2C_FIFO_THRESHOLD;
+		priv->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
 		break;
 
 	/* Master Transaction Done with/without stop */
 	case I2C_IT_MTD:
 	case I2C_IT_MTDWS:
-		if (dev->cli.operation == I2C_READ) {
-			while (!(readl(dev->virtbase + I2C_RISR)
+		if (priv->cli.operation == I2C_READ) {
+			while (!(readl(priv->virtbase + I2C_RISR)
 				 & I2C_IT_RXFE)) {
-				if (dev->cli.count == 0)
+				if (priv->cli.count == 0)
 					break;
-				*dev->cli.buffer =
-					readb(dev->virtbase + I2C_RFR);
-				dev->cli.buffer++;
-				dev->cli.count--;
-				dev->cli.xfer_bytes++;
+				*priv->cli.buffer =
+					nmk_i2c_readb(priv, I2C_RFR);
+				priv->cli.buffer++;
+				priv->cli.count--;
+				priv->cli.xfer_bytes++;
 			}
 		}
 
-		disable_all_interrupts(dev);
-		clear_all_interrupts(dev);
+		disable_all_interrupts(priv);
+		clear_all_interrupts(priv);
 
-		if (dev->cli.count) {
-			dev->result = -EIO;
-			dev_err(&dev->adev->dev,
-				"%lu bytes still remain to be xfered\n",
-				dev->cli.count);
-			(void) init_hw(dev);
+		if (priv->cli.count) {
+			priv->result = -EIO;
+			dev_err(dev, "%lu bytes still remain to be xfered\n",
+				priv->cli.count);
+			init_hw(priv);
 		}
-		complete(&dev->xfer_complete);
+		priv->xfer_done = true;
+		wake_up(&priv->xfer_wq);
+
 
 		break;
 
 	/* Master Arbitration lost interrupt */
 	case I2C_IT_MAL:
-		dev->result = -EIO;
-		(void) init_hw(dev);
+		priv->result = -EIO;
+		init_hw(priv);
+
+		i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_MAL);
+		priv->xfer_done = true;
+		wake_up(&priv->xfer_wq);
 
-		i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
-		complete(&dev->xfer_complete);
 
 		break;
 
@@ -831,15 +895,20 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	 * during the transaction.
 	 */
 	case I2C_IT_BERR:
-		dev->result = -EIO;
-		/* get the status */
-		if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
-			(void) init_hw(dev);
+	{
+		u32 sr;
 
-		i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_BERR);
-		complete(&dev->xfer_complete);
+		sr = readl(priv->virtbase + I2C_SR);
+		priv->result = -EIO;
+		if (FIELD_GET(I2C_SR_STATUS, sr) == I2C_ABORT)
+			init_hw(priv);
 
-		break;
+		i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_BERR);
+		priv->xfer_done = true;
+		wake_up(&priv->xfer_wq);
+
+	}
+	break;
 
 	/*
 	 * Tx FIFO overrun interrupt.
@@ -847,11 +916,13 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	 * the Tx FIFO is full.
 	 */
 	case I2C_IT_TXFOVR:
-		dev->result = -EIO;
-		(void) init_hw(dev);
+		priv->result = -EIO;
+		init_hw(priv);
+
+		dev_err(dev, "Tx Fifo Over run\n");
+		priv->xfer_done = true;
+		wake_up(&priv->xfer_wq);
 
-		dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
-		complete(&dev->xfer_complete);
 
 		break;
 
@@ -863,10 +934,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	case I2C_IT_RFSE:
 	case I2C_IT_WTSR:
 	case I2C_IT_STD:
-		dev_err(&dev->adev->dev, "unhandled Interrupt\n");
+		dev_err(dev, "unhandled Interrupt\n");
 		break;
 	default:
-		dev_err(&dev->adev->dev, "spurious Interrupt..\n");
+		dev_err(dev, "spurious Interrupt..\n");
 		break;
 	}
 
@@ -893,9 +964,9 @@ static int nmk_i2c_resume_early(struct device *dev)
 static int nmk_i2c_runtime_suspend(struct device *dev)
 {
 	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+	struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
 
-	clk_disable_unprepare(nmk_i2c->clk);
+	clk_disable_unprepare(priv->clk);
 	pinctrl_pm_select_idle_state(dev);
 	return 0;
 }
@@ -903,10 +974,10 @@ static int nmk_i2c_runtime_suspend(struct device *dev)
 static int nmk_i2c_runtime_resume(struct device *dev)
 {
 	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+	struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
 	int ret;
 
-	ret = clk_prepare_enable(nmk_i2c->clk);
+	ret = clk_prepare_enable(priv->clk);
 	if (ret) {
 		dev_err(dev, "can't prepare_enable clock\n");
 		return ret;
@@ -914,9 +985,9 @@ static int nmk_i2c_runtime_resume(struct device *dev)
 
 	pinctrl_pm_select_default_state(dev);
 
-	ret = init_hw(nmk_i2c);
+	ret = init_hw(priv);
 	if (ret) {
-		clk_disable_unprepare(nmk_i2c->clk);
+		clk_disable_unprepare(priv->clk);
 		pinctrl_pm_select_idle_state(dev);
 	}
 
@@ -939,107 +1010,160 @@ static const struct i2c_algorithm nmk_i2c_algo = {
 };
 
 static void nmk_i2c_of_probe(struct device_node *np,
-			     struct nmk_i2c_dev *nmk)
+			     struct nmk_i2c_dev *priv)
 {
+	u32 timeout_usecs;
+
 	/* Default to 100 kHz if no frequency is given in the node */
-	if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
-		nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
+	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+		priv->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/* This driver only supports 'standard' and 'fast' modes of operation. */
-	if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
-		nmk->sm = I2C_FREQ_MODE_STANDARD;
+	if (priv->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
+		priv->sm = I2C_FREQ_MODE_STANDARD;
+	else
+		priv->sm = I2C_FREQ_MODE_FAST;
+	priv->tft = 1; /* Tx FIFO threshold */
+	priv->rft = 8; /* Rx FIFO threshold */
+
+	/* Slave response timeout */
+	if (!of_property_read_u32(np, "i2c-transfer-timeout-us", &timeout_usecs))
+		priv->timeout_usecs = timeout_usecs;
+	else
+		priv->timeout_usecs = 200 * USEC_PER_MSEC;
+}
+
+static const unsigned int nmk_i2c_eyeq5_masks[] = {
+	GENMASK(5, 4),
+	GENMASK(7, 6),
+	GENMASK(9, 8),
+	GENMASK(11, 10),
+	GENMASK(13, 12),
+};
+
+static int nmk_i2c_eyeq5_probe(struct nmk_i2c_dev *priv)
+{
+	struct device *dev = &priv->adev->dev;
+	struct device_node *np = dev->of_node;
+	unsigned int mask, speed_mode;
+	struct regmap *olb;
+	unsigned int id;
+
+	priv->has_32b_bus = true;
+
+	olb = syscon_regmap_lookup_by_phandle_args(np, "mobileye,olb", 1, &id);
+	if (IS_ERR(olb))
+		return PTR_ERR(olb);
+	if (id >= ARRAY_SIZE(nmk_i2c_eyeq5_masks))
+		return -ENOENT;
+
+	if (priv->clk_freq <= 400000)
+		speed_mode = I2C_EYEQ5_SPEED_FAST;
+	else if (priv->clk_freq <= 1000000)
+		speed_mode = I2C_EYEQ5_SPEED_FAST_PLUS;
 	else
-		nmk->sm = I2C_FREQ_MODE_FAST;
-	nmk->tft = 1; /* Tx FIFO threshold */
-	nmk->rft = 8; /* Rx FIFO threshold */
-	nmk->timeout = 200; /* Slave response timeout(ms) */
+		speed_mode = I2C_EYEQ5_SPEED_HIGH_SPEED;
+
+	mask = nmk_i2c_eyeq5_masks[id];
+	regmap_update_bits(olb, NMK_I2C_EYEQ5_OLB_IOCR2,
+			   mask, speed_mode << __fls(mask));
+
+	return 0;
 }
 
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
+	struct nmk_i2c_dev *priv;
 	struct device_node *np = adev->dev.of_node;
-	struct nmk_i2c_dev	*dev;
+	struct device *dev = &adev->dev;
 	struct i2c_adapter *adap;
 	struct i2c_vendor_data *vendor = id->data;
 	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
-	dev = devm_kzalloc(&adev->dev, sizeof(*dev), GFP_KERNEL);
-	if (!dev)
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	dev->vendor = vendor;
-	dev->adev = adev;
-	nmk_i2c_of_probe(np, dev);
+	priv->vendor = vendor;
+	priv->adev = adev;
+	priv->has_32b_bus = false;
+	nmk_i2c_of_probe(np, priv);
+
+	if (of_device_is_compatible(np, "mobileye,eyeq5-i2c")) {
+		ret = nmk_i2c_eyeq5_probe(priv);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed OLB lookup\n");
+	}
 
-	if (dev->tft > max_fifo_threshold) {
-		dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
-			 dev->tft, max_fifo_threshold);
-		dev->tft = max_fifo_threshold;
+	if (priv->tft > max_fifo_threshold) {
+		dev_warn(dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+			 priv->tft, max_fifo_threshold);
+		priv->tft = max_fifo_threshold;
 	}
 
-	if (dev->rft > max_fifo_threshold) {
-		dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
-			dev->rft, max_fifo_threshold);
-		dev->rft = max_fifo_threshold;
+	if (priv->rft > max_fifo_threshold) {
+		dev_warn(dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+			 priv->rft, max_fifo_threshold);
+		priv->rft = max_fifo_threshold;
 	}
 
-	amba_set_drvdata(adev, dev);
+	amba_set_drvdata(adev, priv);
 
-	dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
-				resource_size(&adev->res));
-	if (!dev->virtbase)
+	priv->virtbase = devm_ioremap(dev, adev->res.start,
+				      resource_size(&adev->res));
+	if (!priv->virtbase)
 		return -ENOMEM;
 
-	dev->irq = adev->irq[0];
-	ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
-				DRIVER_NAME, dev);
+	priv->irq = adev->irq[0];
+	ret = devm_request_irq(dev, priv->irq, i2c_irq_handler, 0,
+			       DRIVER_NAME, priv);
 	if (ret)
-		return dev_err_probe(&adev->dev, ret,
-				     "cannot claim the irq %d\n", dev->irq);
+		return dev_err_probe(dev, ret,
+				     "cannot claim the irq %d\n", priv->irq);
 
-	dev->clk = devm_clk_get_enabled(&adev->dev, NULL);
-	if (IS_ERR(dev->clk))
-		return dev_err_probe(&adev->dev, PTR_ERR(dev->clk),
+	priv->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
 				     "could enable i2c clock\n");
 
-	init_hw(dev);
+	init_hw(priv);
 
-	adap = &dev->adap;
+	adap = &priv->adap;
 	adap->dev.of_node = np;
-	adap->dev.parent = &adev->dev;
+	adap->dev.parent = dev;
 	adap->owner = THIS_MODULE;
 	adap->class = I2C_CLASS_DEPRECATED;
 	adap->algo = &nmk_i2c_algo;
-	adap->timeout = msecs_to_jiffies(dev->timeout);
+	adap->timeout = usecs_to_jiffies(priv->timeout_usecs);
 	snprintf(adap->name, sizeof(adap->name),
 		 "Nomadik I2C at %pR", &adev->res);
 
-	i2c_set_adapdata(adap, dev);
+	i2c_set_adapdata(adap, priv);
 
-	dev_info(&adev->dev,
+	dev_info(dev,
 		 "initialize %s on virtual base %p\n",
-		 adap->name, dev->virtbase);
+		 adap->name, priv->virtbase);
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
 		return ret;
 
-	pm_runtime_put(&adev->dev);
+	pm_runtime_put(dev);
 
 	return 0;
 }
 
 static void nmk_i2c_remove(struct amba_device *adev)
 {
-	struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
+	struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
 
-	i2c_del_adapter(&dev->adap);
-	flush_i2c_fifo(dev);
-	disable_all_interrupts(dev);
-	clear_all_interrupts(dev);
+	i2c_del_adapter(&priv->adap);
+	flush_i2c_fifo(priv);
+	disable_all_interrupts(priv);
+	clear_all_interrupts(priv);
 	/* disable the controller */
-	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+	i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
 }
 
 static struct i2c_vendor_data vendor_stn8815 = {
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 54181b3f19..2fe6861594 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -1264,9 +1264,6 @@ static int npcm_i2c_reg_slave(struct i2c_client *client)
 
 	bus->slave = client;
 
-	if (!bus->slave)
-		return -EINVAL;
-
 	if (client->flags & I2C_CLIENT_TEN)
 		return -EAFNOSUPPORT;
 
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e106af83ce..350ccfbe86 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -442,8 +442,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
 	oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
 
 	/* Init the device */
-	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
 	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN);
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 76f79b68ce..888ca636f3 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -324,6 +324,7 @@ static void decode_ISR(unsigned int val)
 	decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
 }
 
+#ifdef CONFIG_I2C_PXA_SLAVE
 static const struct bits icr_bits[] = {
 	PXA_BIT(ICR_START,  "START",	NULL),
 	PXA_BIT(ICR_STOP,   "STOP",	NULL),
@@ -342,7 +343,6 @@ static const struct bits icr_bits[] = {
 	PXA_BIT(ICR_UR,     "UR",		"ur"),
 };
 
-#ifdef CONFIG_I2C_PXA_SLAVE
 static void decode_ICR(unsigned int val)
 {
 	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 5adbe62cf6..c65ac3d7ea 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -773,7 +773,7 @@ static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
 	iic_wr(pd, ICCR, ICCR_TRS);
 	udelay(10);
 
-	return sh_mobile_i2c_init(pd);
+	return sh_mobile_i2c_v2_init(pd);
 }
 
 static const struct sh_mobile_dt_config default_dt_config = {
@@ -783,11 +783,6 @@ static const struct sh_mobile_dt_config default_dt_config = {
 
 static const struct sh_mobile_dt_config fast_clock_dt_config = {
 	.clks_per_count = 2,
-	.setup = sh_mobile_i2c_init,
-};
-
-static const struct sh_mobile_dt_config v2_freq_calc_dt_config = {
-	.clks_per_count = 2,
 	.setup = sh_mobile_i2c_v2_init,
 };
 
@@ -799,17 +794,17 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = {
 static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
 	{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
-	{ .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config },
+	{ .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
-	{ .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config },
-	{ .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config },
+	{ .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
 	{},
 };
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index c52d1bec60..28c88901d9 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -570,7 +570,7 @@ err_rpm_put:
 	return ret;
 }
 
-static int sprd_i2c_remove(struct platform_device *pdev)
+static void sprd_i2c_remove(struct platform_device *pdev)
 {
 	struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
 	int ret;
@@ -586,8 +586,6 @@ static int sprd_i2c_remove(struct platform_device *pdev)
 
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
-
-	return 0;
 }
 
 static int __maybe_unused sprd_i2c_suspend_noirq(struct device *dev)
@@ -645,7 +643,7 @@ MODULE_DEVICE_TABLE(of, sprd_i2c_of_match);
 
 static struct platform_driver sprd_i2c_driver = {
 	.probe = sprd_i2c_probe,
-	.remove = sprd_i2c_remove,
+	.remove_new = sprd_i2c_remove,
 	.driver = {
 		   .name = "sprd-i2c",
 		   .of_match_table = sprd_i2c_of_match,
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index bbea521b05..a73f5bb9a1 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -550,17 +550,13 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
 	device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
 				 &i2c->pclkrate);
 
-	i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
-	if (PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-	if (!IS_ERR_OR_NULL(i2c->pclk)) {
-		dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
-
-		ret = clk_prepare_enable(i2c->pclk);
-		if (ret)
-			return dev_err_probe(&pdev->dev, ret, "failed to enable clock\n");
-		i2c->pclkrate = clk_get_rate(i2c->pclk);
-	}
+	i2c->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
+	if (IS_ERR(i2c->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk),
+				     "failed to get and enable clock\n");
+
+	dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
+	i2c->pclkrate = clk_get_rate(i2c->pclk);
 
 	if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
 	    i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE)
@@ -615,8 +611,6 @@ static void synquacer_i2c_remove(struct platform_device *pdev)
 	struct synquacer_i2c *i2c = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c->adapter);
-	if (!IS_ERR(i2c->pclk))
-		clk_disable_unprepare(i2c->pclk);
 };
 
 static const struct of_device_id synquacer_i2c_dt_ids[] __maybe_unused = {
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index d6037a3286..14ae0cfc32 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
 	return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev));
 }
 
+static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev)
+{
+	return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev));
+}
+
 static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
 			   void *arg)
 {
@@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
 			break;
 
 		client = i2c_acpi_find_client_by_adev(adev);
-		if (!client)
-			break;
+		if (client) {
+			i2c_unregister_device(client);
+			put_device(&client->dev);
+		}
+
+		adapter = i2c_acpi_find_adapter_by_adev(adev);
+		if (adapter) {
+			acpi_unbind_one(&adapter->dev);
+			put_device(&adapter->dev);
+		}
 
-		i2c_unregister_device(client);
-		put_device(&client->dev);
 		break;
 	}
 
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 5e2cefb37e..db0d1ac829 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -701,7 +701,7 @@ const struct bus_type i2c_bus_type = {
 };
 EXPORT_SYMBOL_GPL(i2c_bus_type);
 
-struct device_type i2c_client_type = {
+const struct device_type i2c_client_type = {
 	.groups		= i2c_dev_groups,
 	.uevent		= i2c_device_uevent,
 	.release	= i2c_client_dev_release,
@@ -1343,7 +1343,7 @@ static struct attribute *i2c_adapter_attrs[] = {
 };
 ATTRIBUTE_GROUPS(i2c_adapter);
 
-struct device_type i2c_adapter_type = {
+const struct device_type i2c_adapter_type = {
 	.groups		= i2c_adapter_groups,
 	.release	= i2c_adapter_dev_release,
 };
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 74807c6db5..97f338b123 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -351,13 +351,18 @@ void i2c_register_spd(struct i2c_adapter *adap)
 	if (!dimm_count)
 		return;
 
-	dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
-		 dimm_count, slot_count);
-
-	if (slot_count > 8) {
-		dev_warn(&adap->dev,
-			 "Systems with more than 8 memory slots not supported yet, not instantiating SPD\n");
-		return;
+	/*
+	 * If we're a child adapter on a muxed segment, then limit slots to 8,
+	 * as this is the max number of SPD EEPROMs that can be addressed per bus.
+	 */
+	if (i2c_parent_is_i2c_adapter(adap)) {
+		slot_count = 8;
+	} else {
+		if (slot_count > 8) {
+			dev_warn(&adap->dev,
+				 "More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config\n");
+			return;
+		}
 	}
 
 	/*
diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
index 3dda00f1df..4c6ed1d58c 100644
--- a/drivers/i2c/muxes/i2c-mux-mlxcpld.c
+++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -187,7 +187,7 @@ static struct platform_driver mlxcpld_mux_driver = {
 
 module_platform_driver(mlxcpld_mux_driver);
 
-MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
+MODULE_AUTHOR("Michael Shych <michaels@mellanox.com>");
 MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("platform:i2c-mux-mlxcpld");
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 2219062104..c3f4ff08ac 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
 #include <linux/pm.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/mux/mux.h>
@@ -57,6 +58,20 @@
 
 #define PCA954X_IRQ_OFFSET 4
 
+/*
+ * MAX7357's configuration register is writeable after POR, but
+ * can be locked by setting the basic mode bit. MAX7358 configuration
+ * register is locked by default and needs to be unlocked first.
+ * The configuration register holds the following settings:
+ */
+#define MAX7357_CONF_INT_ENABLE			BIT(0)
+#define MAX7357_CONF_FLUSH_OUT			BIT(1)
+#define MAX7357_CONF_RELEASE_INT		BIT(2)
+#define MAX7357_CONF_DISCON_SINGLE_CHAN		BIT(4)
+#define MAX7357_CONF_PRECONNECT_TEST		BIT(7)
+
+#define MAX7357_POR_DEFAULT_CONF		MAX7357_CONF_INT_ENABLE
+
 enum pca_type {
 	max_7356,
 	max_7357,
@@ -102,6 +117,9 @@ struct pca954x {
 	unsigned int irq_mask;
 	raw_spinlock_t lock;
 	struct regulator *supply;
+
+	struct gpio_desc *reset_gpio;
+	struct reset_control *reset_cont;
 };
 
 /* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -470,13 +488,69 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data)
 	else
 		data->last_chan = 0; /* Disconnect multiplexer */
 
-	ret = i2c_smbus_write_byte(client, data->last_chan);
+	if (device_is_compatible(&client->dev, "maxim,max7357")) {
+		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+			u8 conf = MAX7357_POR_DEFAULT_CONF;
+			/*
+			 * The interrupt signal is shared with the reset pin. Release the
+			 * interrupt after 1.6 seconds to allow using the pin as reset.
+			 */
+			conf |= MAX7357_CONF_RELEASE_INT;
+
+			if (device_property_read_bool(&client->dev, "maxim,isolate-stuck-channel"))
+				conf |= MAX7357_CONF_DISCON_SINGLE_CHAN;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,send-flush-out-sequence"))
+				conf |= MAX7357_CONF_FLUSH_OUT;
+			if (device_property_read_bool(&client->dev,
+						      "maxim,preconnection-wiggle-test-enable"))
+				conf |= MAX7357_CONF_PRECONNECT_TEST;
+
+			ret = i2c_smbus_write_byte_data(client, data->last_chan, conf);
+		} else {
+			dev_warn(&client->dev, "Write byte data not supported."
+				 "Cannot enable enhanced mode features\n");
+			ret = i2c_smbus_write_byte(client, data->last_chan);
+		}
+	} else {
+		ret = i2c_smbus_write_byte(client, data->last_chan);
+	}
+
 	if (ret < 0)
 		data->last_chan = 0;
 
 	return ret;
 }
 
+static int pca954x_get_reset(struct device *dev, struct pca954x *data)
+{
+	data->reset_cont = devm_reset_control_get_optional_shared(dev, NULL);
+	if (IS_ERR(data->reset_cont))
+		return dev_err_probe(dev, PTR_ERR(data->reset_cont),
+				     "Failed to get reset\n");
+	else if (data->reset_cont)
+		return 0;
+
+	/*
+	 * fallback to legacy reset-gpios
+	 */
+	data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio)) {
+		return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+				     "Failed to get reset gpio");
+	}
+
+	return 0;
+}
+
+static void pca954x_reset_deassert(struct pca954x *data)
+{
+	if (data->reset_cont)
+		reset_control_deassert(data->reset_cont);
+	else
+		gpiod_set_value_cansleep(data->reset_gpio, 0);
+}
+
 /*
  * I2C init/probing/exit functions
  */
@@ -485,7 +559,6 @@ static int pca954x_probe(struct i2c_client *client)
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
-	struct gpio_desc *gpio;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
 	int num;
@@ -513,15 +586,13 @@ static int pca954x_probe(struct i2c_client *client)
 		return dev_err_probe(dev, ret,
 				     "Failed to enable vdd supply\n");
 
-	/* Reset the mux if a reset GPIO is specified. */
-	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio)) {
-		ret = PTR_ERR(gpio);
+	ret = pca954x_get_reset(dev, data);
+	if (ret)
 		goto fail_cleanup;
-	}
-	if (gpio) {
+
+	if (data->reset_cont || data->reset_gpio) {
 		udelay(1);
-		gpiod_set_value_cansleep(gpio, 0);
+		pca954x_reset_deassert(data);
 		/* Give the chip some time to recover. */
 		udelay(1);
 	}