Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1031 insertions, 0 deletions

diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c
new file mode 100644
index 0000000000..b6c4ef7048
--- /dev/null
+++ b/drivers/iio/adc/cpcap-adc.c
@@ -0,0 +1,1031 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Rewritten for Linux IIO framework with some code based on
+ * earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/* Register CPCAP_REG_ADCC1 bits */
+#define CPCAP_BIT_ADEN_AUTO_CLR		BIT(15)	/* Currently unused */
+#define CPCAP_BIT_CAL_MODE		BIT(14) /* Set with BIT_RAND0 */
+#define CPCAP_BIT_ADC_CLK_SEL1		BIT(13)	/* Currently unused */
+#define CPCAP_BIT_ADC_CLK_SEL0		BIT(12)	/* Currently unused */
+#define CPCAP_BIT_ATOX			BIT(11)
+#define CPCAP_BIT_ATO3			BIT(10)
+#define CPCAP_BIT_ATO2			BIT(9)
+#define CPCAP_BIT_ATO1			BIT(8)
+#define CPCAP_BIT_ATO0			BIT(7)
+#define CPCAP_BIT_ADA2			BIT(6)
+#define CPCAP_BIT_ADA1			BIT(5)
+#define CPCAP_BIT_ADA0			BIT(4)
+#define CPCAP_BIT_AD_SEL1		BIT(3)	/* Set for bank1 */
+#define CPCAP_BIT_RAND1			BIT(2)	/* Set for channel 16 & 17 */
+#define CPCAP_BIT_RAND0			BIT(1)	/* Set with CAL_MODE */
+#define CPCAP_BIT_ADEN			BIT(0)	/* Currently unused */
+
+#define CPCAP_REG_ADCC1_DEFAULTS	(CPCAP_BIT_ADEN_AUTO_CLR | \
+					 CPCAP_BIT_ADC_CLK_SEL0 |  \
+					 CPCAP_BIT_RAND1)
+
+/* Register CPCAP_REG_ADCC2 bits */
+#define CPCAP_BIT_CAL_FACTOR_ENABLE	BIT(15)	/* Currently unused */
+#define CPCAP_BIT_BATDETB_EN		BIT(14)	/* Currently unused */
+#define CPCAP_BIT_ADTRIG_ONESHOT	BIT(13)	/* Set for !TIMING_IMM */
+#define CPCAP_BIT_ASC			BIT(12)	/* Set for TIMING_IMM */
+#define CPCAP_BIT_ATOX_PS_FACTOR	BIT(11)
+#define CPCAP_BIT_ADC_PS_FACTOR1	BIT(10)
+#define CPCAP_BIT_ADC_PS_FACTOR0	BIT(9)
+#define CPCAP_BIT_AD4_SELECT		BIT(8)	/* Currently unused */
+#define CPCAP_BIT_ADC_BUSY		BIT(7)	/* Currently unused */
+#define CPCAP_BIT_THERMBIAS_EN		BIT(6)	/* Bias for AD0_BATTDETB */
+#define CPCAP_BIT_ADTRIG_DIS		BIT(5)	/* Disable interrupt */
+#define CPCAP_BIT_LIADC			BIT(4)	/* Currently unused */
+#define CPCAP_BIT_TS_REFEN		BIT(3)	/* Currently unused */
+#define CPCAP_BIT_TS_M2			BIT(2)	/* Currently unused */
+#define CPCAP_BIT_TS_M1			BIT(1)	/* Currently unused */
+#define CPCAP_BIT_TS_M0			BIT(0)	/* Currently unused */
+
+#define CPCAP_REG_ADCC2_DEFAULTS	(CPCAP_BIT_AD4_SELECT | \
+					 CPCAP_BIT_ADTRIG_DIS | \
+					 CPCAP_BIT_LIADC | \
+					 CPCAP_BIT_TS_M2 | \
+					 CPCAP_BIT_TS_M1)
+
+#define CPCAP_MAX_TEMP_LVL		27
+#define CPCAP_FOUR_POINT_TWO_ADC	801
+#define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD	530
+#define ST_ADC_CAL_CHRGI_LOW_THRESHOLD	494
+#define ST_ADC_CAL_BATTI_HIGH_THRESHOLD	530
+#define ST_ADC_CAL_BATTI_LOW_THRESHOLD	494
+#define ST_ADC_CALIBRATE_DIFF_THRESHOLD	3
+
+#define CPCAP_ADC_MAX_RETRIES		5	/* Calibration */
+
+/*
+ * struct cpcap_adc_ato - timing settings for cpcap adc
+ *
+ * Unfortunately no cpcap documentation available, please document when
+ * using these.
+ */
+struct cpcap_adc_ato {
+	unsigned short ato_in;
+	unsigned short atox_in;
+	unsigned short adc_ps_factor_in;
+	unsigned short atox_ps_factor_in;
+	unsigned short ato_out;
+	unsigned short atox_out;
+	unsigned short adc_ps_factor_out;
+	unsigned short atox_ps_factor_out;
+};
+
+/**
+ * struct cpcap_adc - cpcap adc device driver data
+ * @reg: cpcap regmap
+ * @dev: struct device
+ * @vendor: cpcap vendor
+ * @irq: interrupt
+ * @lock: mutex
+ * @ato: request timings
+ * @wq_data_avail: work queue
+ * @done: work done
+ */
+struct cpcap_adc {
+	struct regmap *reg;
+	struct device *dev;
+	u16 vendor;
+	int irq;
+	struct mutex lock;	/* ADC register access lock */
+	const struct cpcap_adc_ato *ato;
+	wait_queue_head_t wq_data_avail;
+	bool done;
+};
+
+/*
+ * enum cpcap_adc_channel - cpcap adc channels
+ */
+enum cpcap_adc_channel {
+	/* Bank0 channels */
+	CPCAP_ADC_AD0,		/* Battery temperature */
+	CPCAP_ADC_BATTP,	/* Battery voltage */
+	CPCAP_ADC_VBUS,		/* USB VBUS voltage */
+	CPCAP_ADC_AD3,		/* Die temperature when charging */
+	CPCAP_ADC_BPLUS_AD4,	/* Another battery or system voltage */
+	CPCAP_ADC_CHG_ISENSE,	/* Calibrated charge current */
+	CPCAP_ADC_BATTI,	/* Calibrated system current */
+	CPCAP_ADC_USB_ID,	/* USB OTG ID, unused on droid 4? */
+
+	/* Bank1 channels */
+	CPCAP_ADC_AD8,		/* Seems unused */
+	CPCAP_ADC_AD9,		/* Seems unused */
+	CPCAP_ADC_LICELL,	/* Maybe system voltage? Always 3V */
+	CPCAP_ADC_HV_BATTP,	/* Another battery detection? */
+	CPCAP_ADC_TSX1_AD12,	/* Seems unused, for touchscreen? */
+	CPCAP_ADC_TSX2_AD13,	/* Seems unused, for touchscreen? */
+	CPCAP_ADC_TSY1_AD14,	/* Seems unused, for touchscreen? */
+	CPCAP_ADC_TSY2_AD15,	/* Seems unused, for touchscreen? */
+
+	/* Remuxed channels using bank0 entries */
+	CPCAP_ADC_BATTP_PI16,	/* Alternative mux mode for BATTP */
+	CPCAP_ADC_BATTI_PI17,	/* Alternative mux mode for BATTI */
+
+	CPCAP_ADC_CHANNEL_NUM,
+};
+
+/*
+ * enum cpcap_adc_timing - cpcap adc timing options
+ *
+ * CPCAP_ADC_TIMING_IMM seems to be immediate with no timings.
+ * Please document when using.
+ */
+enum cpcap_adc_timing {
+	CPCAP_ADC_TIMING_IMM,
+	CPCAP_ADC_TIMING_IN,
+	CPCAP_ADC_TIMING_OUT,
+};
+
+/**
+ * struct cpcap_adc_phasing_tbl - cpcap phasing table
+ * @offset: offset in the phasing table
+ * @multiplier: multiplier in the phasing table
+ * @divider: divider in the phasing table
+ * @min: minimum value
+ * @max: maximum value
+ */
+struct cpcap_adc_phasing_tbl {
+	short offset;
+	unsigned short multiplier;
+	unsigned short divider;
+	short min;
+	short max;
+};
+
+/**
+ * struct cpcap_adc_conversion_tbl - cpcap conversion table
+ * @conv_type: conversion type
+ * @align_offset: align offset
+ * @conv_offset: conversion offset
+ * @cal_offset: calibration offset
+ * @multiplier: conversion multiplier
+ * @divider: conversion divider
+ */
+struct cpcap_adc_conversion_tbl {
+	enum iio_chan_info_enum conv_type;
+	int align_offset;
+	int conv_offset;
+	int cal_offset;
+	int multiplier;
+	int divider;
+};
+
+/**
+ * struct cpcap_adc_request - cpcap adc request
+ * @channel: request channel
+ * @phase_tbl: channel phasing table
+ * @conv_tbl: channel conversion table
+ * @bank_index: channel index within the bank
+ * @timing: timing settings
+ * @result: result
+ */
+struct cpcap_adc_request {
+	int channel;
+	const struct cpcap_adc_phasing_tbl *phase_tbl;
+	const struct cpcap_adc_conversion_tbl *conv_tbl;
+	int bank_index;
+	enum cpcap_adc_timing timing;
+	int result;
+};
+
+/* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */
+static const struct cpcap_adc_phasing_tbl bank_phasing[] = {
+	/* Bank0 */
+	[CPCAP_ADC_AD0] =          {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_BATTP] =        {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_VBUS] =         {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_AD3] =          {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_BPLUS_AD4] =    {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_CHG_ISENSE] =   {0, 0x80, 0x80, -512,  511},
+	[CPCAP_ADC_BATTI] =        {0, 0x80, 0x80, -512,  511},
+	[CPCAP_ADC_USB_ID] =       {0, 0x80, 0x80,    0, 1023},
+
+	/* Bank1 */
+	[CPCAP_ADC_AD8] =          {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_AD9] =          {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_LICELL] =       {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_HV_BATTP] =     {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_TSX1_AD12] =    {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_TSX2_AD13] =    {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_TSY1_AD14] =    {0, 0x80, 0x80,    0, 1023},
+	[CPCAP_ADC_TSY2_AD15] =    {0, 0x80, 0x80,    0, 1023},
+};
+
+/*
+ * Conversion table for channels. Updated during init based on calibration.
+ * Here too channels 16 & 17 use BATTP and BATTI.
+ */
+static struct cpcap_adc_conversion_tbl bank_conversion[] = {
+	/* Bank0 */
+	[CPCAP_ADC_AD0] = {
+		IIO_CHAN_INFO_PROCESSED,    0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_BATTP] = {
+		IIO_CHAN_INFO_PROCESSED,    0, 2400, 0,  2300, 1023,
+	},
+	[CPCAP_ADC_VBUS] = {
+		IIO_CHAN_INFO_PROCESSED,    0,    0, 0, 10000, 1023,
+	},
+	[CPCAP_ADC_AD3] = {
+		IIO_CHAN_INFO_PROCESSED,    0,    0, 0,     1,    1,
+		},
+	[CPCAP_ADC_BPLUS_AD4] = {
+		IIO_CHAN_INFO_PROCESSED,    0, 2400, 0,  2300, 1023,
+	},
+	[CPCAP_ADC_CHG_ISENSE] = {
+		IIO_CHAN_INFO_PROCESSED, -512,    2, 0,  5000, 1023,
+	},
+	[CPCAP_ADC_BATTI] = {
+		IIO_CHAN_INFO_PROCESSED, -512,    2, 0,  5000, 1023,
+	},
+	[CPCAP_ADC_USB_ID] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+
+	/* Bank1 */
+	[CPCAP_ADC_AD8] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_AD9] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_LICELL] = {
+		IIO_CHAN_INFO_PROCESSED,    0,    0, 0,  3400, 1023,
+	},
+	[CPCAP_ADC_HV_BATTP] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_TSX1_AD12] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_TSX2_AD13] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_TSY1_AD14] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+	[CPCAP_ADC_TSY2_AD15] = {
+		IIO_CHAN_INFO_RAW,          0,    0, 0,     1,    1,
+	},
+};
+
+/*
+ * Temperature lookup table of register values to milliCelcius.
+ * REVISIT: Check the duplicate 0x3ff entry in a freezer
+ */
+static const int temp_map[CPCAP_MAX_TEMP_LVL][2] = {
+	{ 0x03ff, -40000 },
+	{ 0x03ff, -35000 },
+	{ 0x03ef, -30000 },
+	{ 0x03b2, -25000 },
+	{ 0x036c, -20000 },
+	{ 0x0320, -15000 },
+	{ 0x02d0, -10000 },
+	{ 0x027f, -5000 },
+	{ 0x022f, 0 },
+	{ 0x01e4, 5000 },
+	{ 0x019f, 10000 },
+	{ 0x0161, 15000 },
+	{ 0x012b, 20000 },
+	{ 0x00fc, 25000 },
+	{ 0x00d4, 30000 },
+	{ 0x00b2, 35000 },
+	{ 0x0095, 40000 },
+	{ 0x007d, 45000 },
+	{ 0x0069, 50000 },
+	{ 0x0059, 55000 },
+	{ 0x004b, 60000 },
+	{ 0x003f, 65000 },
+	{ 0x0036, 70000 },
+	{ 0x002e, 75000 },
+	{ 0x0027, 80000 },
+	{ 0x0022, 85000 },
+	{ 0x001d, 90000 },
+};
+
+#define CPCAP_CHAN(_type, _index, _address, _datasheet_name) {	\
+	.type = (_type), \
+	.address = (_address), \
+	.indexed = 1, \
+	.channel = (_index), \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_PROCESSED), \
+	.scan_index = (_index), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 10, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	}, \
+	.datasheet_name = (_datasheet_name), \
+}
+
+/*
+ * The datasheet names are from Motorola mapphone Linux kernel except
+ * for the last two which might be uncalibrated charge voltage and
+ * current.
+ */
+static const struct iio_chan_spec cpcap_adc_channels[] = {
+	/* Bank0 */
+	CPCAP_CHAN(IIO_TEMP,    0, CPCAP_REG_ADCD0,  "battdetb"),
+	CPCAP_CHAN(IIO_VOLTAGE, 1, CPCAP_REG_ADCD1,  "battp"),
+	CPCAP_CHAN(IIO_VOLTAGE, 2, CPCAP_REG_ADCD2,  "vbus"),
+	CPCAP_CHAN(IIO_TEMP,    3, CPCAP_REG_ADCD3,  "ad3"),
+	CPCAP_CHAN(IIO_VOLTAGE, 4, CPCAP_REG_ADCD4,  "ad4"),
+	CPCAP_CHAN(IIO_CURRENT, 5, CPCAP_REG_ADCD5,  "chg_isense"),
+	CPCAP_CHAN(IIO_CURRENT, 6, CPCAP_REG_ADCD6,  "batti"),
+	CPCAP_CHAN(IIO_VOLTAGE, 7, CPCAP_REG_ADCD7,  "usb_id"),
+
+	/* Bank1 */
+	CPCAP_CHAN(IIO_CURRENT, 8, CPCAP_REG_ADCD0,  "ad8"),
+	CPCAP_CHAN(IIO_VOLTAGE, 9, CPCAP_REG_ADCD1,  "ad9"),
+	CPCAP_CHAN(IIO_VOLTAGE, 10, CPCAP_REG_ADCD2, "licell"),
+	CPCAP_CHAN(IIO_VOLTAGE, 11, CPCAP_REG_ADCD3, "hv_battp"),
+	CPCAP_CHAN(IIO_VOLTAGE, 12, CPCAP_REG_ADCD4, "tsx1_ad12"),
+	CPCAP_CHAN(IIO_VOLTAGE, 13, CPCAP_REG_ADCD5, "tsx2_ad13"),
+	CPCAP_CHAN(IIO_VOLTAGE, 14, CPCAP_REG_ADCD6, "tsy1_ad14"),
+	CPCAP_CHAN(IIO_VOLTAGE, 15, CPCAP_REG_ADCD7, "tsy2_ad15"),
+
+	/* There are two registers with multiplexed functionality */
+	CPCAP_CHAN(IIO_VOLTAGE, 16, CPCAP_REG_ADCD0, "chg_vsense"),
+	CPCAP_CHAN(IIO_CURRENT, 17, CPCAP_REG_ADCD1, "batti2"),
+};
+
+static irqreturn_t cpcap_adc_irq_thread(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct cpcap_adc *ddata = iio_priv(indio_dev);
+	int error;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				   CPCAP_BIT_ADTRIG_DIS,
+				   CPCAP_BIT_ADTRIG_DIS);
+	if (error)
+		return IRQ_NONE;
+
+	ddata->done = true;
+	wake_up_interruptible(&ddata->wq_data_avail);
+
+	return IRQ_HANDLED;
+}
+
+/* ADC calibration functions */
+static void cpcap_adc_setup_calibrate(struct cpcap_adc *ddata,
+				      enum cpcap_adc_channel chan)
+{
+	unsigned int value = 0;
+	unsigned long timeout = jiffies + msecs_to_jiffies(3000);
+	int error;
+
+	if ((chan != CPCAP_ADC_CHG_ISENSE) &&
+	    (chan != CPCAP_ADC_BATTI))
+		return;
+
+	value |= CPCAP_BIT_CAL_MODE | CPCAP_BIT_RAND0;
+	value |= ((chan << 4) &
+		  (CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | CPCAP_BIT_ADA0));
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+				   CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX |
+				   CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 |
+				   CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 |
+				   CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 |
+				   CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 |
+				   CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0,
+				   value);
+	if (error)
+		return;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				   CPCAP_BIT_ATOX_PS_FACTOR |
+				   CPCAP_BIT_ADC_PS_FACTOR1 |
+				   CPCAP_BIT_ADC_PS_FACTOR0,
+				   0);
+	if (error)
+		return;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				   CPCAP_BIT_ADTRIG_DIS,
+				   CPCAP_BIT_ADTRIG_DIS);
+	if (error)
+		return;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				   CPCAP_BIT_ASC,
+				   CPCAP_BIT_ASC);
+	if (error)
+		return;
+
+	do {
+		schedule_timeout_uninterruptible(1);
+		error = regmap_read(ddata->reg, CPCAP_REG_ADCC2, &value);
+		if (error)
+			return;
+	} while ((value & CPCAP_BIT_ASC) && time_before(jiffies, timeout));
+
+	if (value & CPCAP_BIT_ASC)
+		dev_err(ddata->dev,
+			"Timeout waiting for calibration to complete\n");
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+				   CPCAP_BIT_CAL_MODE, 0);
+	if (error)
+		return;
+}
+
+static int cpcap_adc_calibrate_one(struct cpcap_adc *ddata,
+				   int channel,
+				   u16 calibration_register,
+				   int lower_threshold,
+				   int upper_threshold)
+{
+	unsigned int calibration_data[2];
+	unsigned short cal_data_diff;
+	int i, error;
+
+	for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) {
+		calibration_data[0]  = 0;
+		calibration_data[1]  = 0;
+
+		cpcap_adc_setup_calibrate(ddata, channel);
+		error = regmap_read(ddata->reg, calibration_register,
+				    &calibration_data[0]);
+		if (error)
+			return error;
+		cpcap_adc_setup_calibrate(ddata, channel);
+		error = regmap_read(ddata->reg, calibration_register,
+				    &calibration_data[1]);
+		if (error)
+			return error;
+
+		if (calibration_data[0] > calibration_data[1])
+			cal_data_diff =
+				calibration_data[0] - calibration_data[1];
+		else
+			cal_data_diff =
+				calibration_data[1] - calibration_data[0];
+
+		if (((calibration_data[1] >= lower_threshold) &&
+		     (calibration_data[1] <= upper_threshold) &&
+		     (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) ||
+		    (ddata->vendor == CPCAP_VENDOR_TI)) {
+			bank_conversion[channel].cal_offset =
+				((short)calibration_data[1] * -1) + 512;
+			dev_dbg(ddata->dev, "ch%i calibration complete: %i\n",
+				channel, bank_conversion[channel].cal_offset);
+			break;
+		}
+		usleep_range(5000, 10000);
+	}
+
+	return 0;
+}
+
+static int cpcap_adc_calibrate(struct cpcap_adc *ddata)
+{
+	int error;
+
+	error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_CHG_ISENSE,
+					CPCAP_REG_ADCAL1,
+					ST_ADC_CAL_CHRGI_LOW_THRESHOLD,
+					ST_ADC_CAL_CHRGI_HIGH_THRESHOLD);
+	if (error)
+		return error;
+
+	error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_BATTI,
+					CPCAP_REG_ADCAL2,
+					ST_ADC_CAL_BATTI_LOW_THRESHOLD,
+					ST_ADC_CAL_BATTI_HIGH_THRESHOLD);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+/* ADC setup, read and scale functions */
+static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
+				 struct cpcap_adc_request *req)
+{
+	const struct cpcap_adc_ato *ato = ddata->ato;
+	unsigned short value1 = 0;
+	unsigned short value2 = 0;
+	int error;
+
+	if (!ato)
+		return;
+
+	switch (req->channel) {
+	case CPCAP_ADC_AD0:
+		value2 |= CPCAP_BIT_THERMBIAS_EN;
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+					   CPCAP_BIT_THERMBIAS_EN,
+					   value2);
+		if (error)
+			return;
+		usleep_range(800, 1000);
+		break;
+	case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
+		value1 |= CPCAP_BIT_AD_SEL1;
+		break;
+	case CPCAP_ADC_BATTP_PI16 ... CPCAP_ADC_BATTI_PI17:
+		value1 |= CPCAP_BIT_RAND1;
+		break;
+	default:
+		break;
+	}
+
+	switch (req->timing) {
+	case CPCAP_ADC_TIMING_IN:
+		value1 |= ato->ato_in;
+		value1 |= ato->atox_in;
+		value2 |= ato->adc_ps_factor_in;
+		value2 |= ato->atox_ps_factor_in;
+		break;
+	case CPCAP_ADC_TIMING_OUT:
+		value1 |= ato->ato_out;
+		value1 |= ato->atox_out;
+		value2 |= ato->adc_ps_factor_out;
+		value2 |= ato->atox_ps_factor_out;
+		break;
+
+	case CPCAP_ADC_TIMING_IMM:
+	default:
+		break;
+	}
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+				   CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX |
+				   CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 |
+				   CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 |
+				   CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 |
+				   CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 |
+				   CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0,
+				   value1);
+	if (error)
+		return;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				   CPCAP_BIT_ATOX_PS_FACTOR |
+				   CPCAP_BIT_ADC_PS_FACTOR1 |
+				   CPCAP_BIT_ADC_PS_FACTOR0 |
+				   CPCAP_BIT_THERMBIAS_EN,
+				   value2);
+	if (error)
+		return;
+
+	if (req->timing == CPCAP_ADC_TIMING_IMM) {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+					   CPCAP_BIT_ADTRIG_DIS,
+					   CPCAP_BIT_ADTRIG_DIS);
+		if (error)
+			return;
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+					   CPCAP_BIT_ASC,
+					   CPCAP_BIT_ASC);
+		if (error)
+			return;
+	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+					   CPCAP_BIT_ADTRIG_ONESHOT,
+					   CPCAP_BIT_ADTRIG_ONESHOT);
+		if (error)
+			return;
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+					   CPCAP_BIT_ADTRIG_DIS, 0);
+		if (error)
+			return;
+	}
+}
+
+static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
+				struct cpcap_adc_request *req)
+{
+	int i, error;
+
+	req->timing = CPCAP_ADC_TIMING_IMM;
+	ddata->done = false;
+
+	for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) {
+		cpcap_adc_setup_bank(ddata, req);
+		error = wait_event_interruptible_timeout(ddata->wq_data_avail,
+							 ddata->done,
+							 msecs_to_jiffies(50));
+		if (error > 0)
+			return 0;
+
+		if (error == 0) {
+			error = -ETIMEDOUT;
+			continue;
+		}
+
+		if (error < 0)
+			return error;
+	}
+
+	return error;
+}
+
+static int cpcap_adc_stop_bank(struct cpcap_adc *ddata)
+{
+	int error;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+				   0xffff,
+				   CPCAP_REG_ADCC1_DEFAULTS);
+	if (error)
+		return error;
+
+	return regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+				  0xffff,
+				  CPCAP_REG_ADCC2_DEFAULTS);
+}
+
+static void cpcap_adc_phase(struct cpcap_adc_request *req)
+{
+	const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl;
+	const struct cpcap_adc_phasing_tbl *phase_tbl = req->phase_tbl;
+	int index = req->channel;
+
+	/* Remuxed channels 16 and 17 use BATTP and BATTI entries */
+	switch (req->channel) {
+	case CPCAP_ADC_BATTP:
+	case CPCAP_ADC_BATTP_PI16:
+		index = req->bank_index;
+		req->result -= phase_tbl[index].offset;
+		req->result -= CPCAP_FOUR_POINT_TWO_ADC;
+		req->result *= phase_tbl[index].multiplier;
+		if (phase_tbl[index].divider == 0)
+			return;
+		req->result /= phase_tbl[index].divider;
+		req->result += CPCAP_FOUR_POINT_TWO_ADC;
+		break;
+	case CPCAP_ADC_BATTI_PI17:
+		index = req->bank_index;
+		fallthrough;
+	default:
+		req->result += conv_tbl[index].cal_offset;
+		req->result += conv_tbl[index].align_offset;
+		req->result *= phase_tbl[index].multiplier;
+		if (phase_tbl[index].divider == 0)
+			return;
+		req->result /= phase_tbl[index].divider;
+		req->result += phase_tbl[index].offset;
+		break;
+	}
+
+	if (req->result < phase_tbl[index].min)
+		req->result = phase_tbl[index].min;
+	else if (req->result > phase_tbl[index].max)
+		req->result = phase_tbl[index].max;
+}
+
+/* Looks up temperatures in a table and calculates averages if needed */
+static int cpcap_adc_table_to_millicelcius(unsigned short value)
+{
+	int i, result = 0, alpha;
+
+	if (value <= temp_map[CPCAP_MAX_TEMP_LVL - 1][0])
+		return temp_map[CPCAP_MAX_TEMP_LVL - 1][1];
+
+	if (value >= temp_map[0][0])
+		return temp_map[0][1];
+
+	for (i = 0; i < CPCAP_MAX_TEMP_LVL - 1; i++) {
+		if ((value <= temp_map[i][0]) &&
+		    (value >= temp_map[i + 1][0])) {
+			if (value == temp_map[i][0]) {
+				result = temp_map[i][1];
+			} else if (value == temp_map[i + 1][0]) {
+				result = temp_map[i + 1][1];
+			} else {
+				alpha = ((value - temp_map[i][0]) * 1000) /
+					(temp_map[i + 1][0] - temp_map[i][0]);
+
+				result = temp_map[i][1] +
+					((alpha * (temp_map[i + 1][1] -
+						 temp_map[i][1])) / 1000);
+			}
+			break;
+		}
+	}
+
+	return result;
+}
+
+static void cpcap_adc_convert(struct cpcap_adc_request *req)
+{
+	const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl;
+	int index = req->channel;
+
+	/* Remuxed channels 16 and 17 use BATTP and BATTI entries */
+	switch (req->channel) {
+	case CPCAP_ADC_BATTP_PI16:
+		index = CPCAP_ADC_BATTP;
+		break;
+	case CPCAP_ADC_BATTI_PI17:
+		index = CPCAP_ADC_BATTI;
+		break;
+	default:
+		break;
+	}
+
+	/* No conversion for raw channels */
+	if (conv_tbl[index].conv_type == IIO_CHAN_INFO_RAW)
+		return;
+
+	/* Temperatures use a lookup table instead of conversion table */
+	if ((req->channel == CPCAP_ADC_AD0) ||
+	    (req->channel == CPCAP_ADC_AD3)) {
+		req->result =
+			cpcap_adc_table_to_millicelcius(req->result);
+
+		return;
+	}
+
+	/* All processed channels use a conversion table */
+	req->result *= conv_tbl[index].multiplier;
+	if (conv_tbl[index].divider == 0)
+		return;
+	req->result /= conv_tbl[index].divider;
+	req->result += conv_tbl[index].conv_offset;
+}
+
+/*
+ * REVISIT: Check if timed sampling can use multiple channels at the
+ * same time. If not, replace channel_mask with just channel.
+ */
+static int cpcap_adc_read_bank_scaled(struct cpcap_adc *ddata,
+				      struct cpcap_adc_request *req)
+{
+	int calibration_data, error, addr;
+
+	if (ddata->vendor == CPCAP_VENDOR_TI) {
+		error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1,
+				    &calibration_data);
+		if (error)
+			return error;
+		bank_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset =
+			((short)calibration_data * -1) + 512;
+
+		error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2,
+				    &calibration_data);
+		if (error)
+			return error;
+		bank_conversion[CPCAP_ADC_BATTI].cal_offset =
+			((short)calibration_data * -1) + 512;
+	}
+
+	addr = CPCAP_REG_ADCD0 + req->bank_index * 4;
+
+	error = regmap_read(ddata->reg, addr, &req->result);
+	if (error)
+		return error;
+
+	req->result &= 0x3ff;
+	cpcap_adc_phase(req);
+	cpcap_adc_convert(req);
+
+	return 0;
+}
+
+static int cpcap_adc_init_request(struct cpcap_adc_request *req,
+				  int channel)
+{
+	req->channel = channel;
+	req->phase_tbl = bank_phasing;
+	req->conv_tbl = bank_conversion;
+
+	switch (channel) {
+	case CPCAP_ADC_AD0 ... CPCAP_ADC_USB_ID:
+		req->bank_index = channel;
+		break;
+	case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
+		req->bank_index = channel - 8;
+		break;
+	case CPCAP_ADC_BATTP_PI16:
+		req->bank_index = CPCAP_ADC_BATTP;
+		break;
+	case CPCAP_ADC_BATTI_PI17:
+		req->bank_index = CPCAP_ADC_BATTI;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_adc_read_st_die_temp(struct cpcap_adc *ddata,
+				      int addr, int *val)
+{
+	int error;
+
+	error = regmap_read(ddata->reg, addr, val);
+	if (error)
+		return error;
+
+	*val -= 282;
+	*val *= 114;
+	*val += 25000;
+
+	return 0;
+}
+
+static int cpcap_adc_read(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct cpcap_adc *ddata = iio_priv(indio_dev);
+	struct cpcap_adc_request req;
+	int error;
+
+	error = cpcap_adc_init_request(&req, chan->channel);
+	if (error)
+		return error;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&ddata->lock);
+		error = cpcap_adc_start_bank(ddata, &req);
+		if (error)
+			goto err_unlock;
+		error = regmap_read(ddata->reg, chan->address, val);
+		if (error)
+			goto err_unlock;
+		error = cpcap_adc_stop_bank(ddata);
+		if (error)
+			goto err_unlock;
+		mutex_unlock(&ddata->lock);
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&ddata->lock);
+		error = cpcap_adc_start_bank(ddata, &req);
+		if (error)
+			goto err_unlock;
+		if ((ddata->vendor == CPCAP_VENDOR_ST) &&
+		    (chan->channel == CPCAP_ADC_AD3)) {
+			error = cpcap_adc_read_st_die_temp(ddata,
+							   chan->address,
+							   &req.result);
+			if (error)
+				goto err_unlock;
+		} else {
+			error = cpcap_adc_read_bank_scaled(ddata, &req);
+			if (error)
+				goto err_unlock;
+		}
+		error = cpcap_adc_stop_bank(ddata);
+		if (error)
+			goto err_unlock;
+		mutex_unlock(&ddata->lock);
+		*val = req.result;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+
+err_unlock:
+	mutex_unlock(&ddata->lock);
+	dev_err(ddata->dev, "error reading ADC: %i\n", error);
+
+	return error;
+}
+
+static const struct iio_info cpcap_adc_info = {
+	.read_raw = &cpcap_adc_read,
+};
+
+/*
+ * Configuration for Motorola mapphone series such as droid 4.
+ * Copied from the Motorola mapphone kernel tree.
+ */
+static const struct cpcap_adc_ato mapphone_adc = {
+	.ato_in = 0x0480,
+	.atox_in = 0,
+	.adc_ps_factor_in = 0x0200,
+	.atox_ps_factor_in = 0,
+	.ato_out = 0,
+	.atox_out = 0,
+	.adc_ps_factor_out = 0,
+	.atox_ps_factor_out = 0,
+};
+
+static const struct of_device_id cpcap_adc_id_table[] = {
+	{
+		.compatible = "motorola,cpcap-adc",
+	},
+	{
+		.compatible = "motorola,mapphone-cpcap-adc",
+		.data = &mapphone_adc,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cpcap_adc_id_table);
+
+static int cpcap_adc_probe(struct platform_device *pdev)
+{
+	struct cpcap_adc *ddata;
+	struct iio_dev *indio_dev;
+	int error;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed to allocate iio device\n");
+
+		return -ENOMEM;
+	}
+	ddata = iio_priv(indio_dev);
+	ddata->ato = device_get_match_data(&pdev->dev);
+	if (!ddata->ato)
+		return -ENODEV;
+	ddata->dev = &pdev->dev;
+
+	mutex_init(&ddata->lock);
+	init_waitqueue_head(&ddata->wq_data_avail);
+
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+	indio_dev->channels = cpcap_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels);
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->info = &cpcap_adc_info;
+
+	ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ddata->irq = platform_get_irq_byname(pdev, "adcdone");
+	if (ddata->irq < 0)
+		return -ENODEV;
+
+	error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL,
+					  cpcap_adc_irq_thread,
+					  IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+					  "cpcap-adc", indio_dev);
+	if (error) {
+		dev_err(&pdev->dev, "could not get irq: %i\n",
+			error);
+
+		return error;
+	}
+
+	error = cpcap_adc_calibrate(ddata);
+	if (error)
+		return error;
+
+	dev_info(&pdev->dev, "CPCAP ADC device probed\n");
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver cpcap_adc_driver = {
+	.driver = {
+		.name = "cpcap_adc",
+		.of_match_table = cpcap_adc_id_table,
+	},
+	.probe = cpcap_adc_probe,
+};
+
+module_platform_driver(cpcap_adc_driver);
+
+MODULE_ALIAS("platform:cpcap_adc");
+MODULE_DESCRIPTION("CPCAP ADC driver");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com");
+MODULE_LICENSE("GPL v2");