Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 323 insertions, 0 deletions

diff --git a/drivers/iio/adc/ti-adc108s102.c b/drivers/iio/adc/ti-adc108s102.c
new file mode 100644
index 0000000000..c82a161630
--- /dev/null
+++ b/drivers/iio/adc/ti-adc108s102.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI ADC108S102 SPI ADC driver
+ *
+ * Copyright (c) 2013-2015 Intel Corporation.
+ * Copyright (c) 2017 Siemens AG
+ *
+ * This IIO device driver is designed to work with the following
+ * analog to digital converters from Texas Instruments:
+ *  ADC108S102
+ *  ADC128S102
+ * The communication with ADC chip is via the SPI bus (mode 3).
+ */
+
+#include <linux/acpi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/types.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+/*
+ * In case of ACPI, we use the hard-wired 5000 mV of the Galileo and IOT2000
+ * boards as default for the reference pin VA. Device tree users encode that
+ * via the vref-supply regulator.
+ */
+#define ADC108S102_VA_MV_ACPI_DEFAULT	5000
+
+/*
+ * Defining the ADC resolution being 12 bits, we can use the same driver for
+ * both ADC108S102 (10 bits resolution) and ADC128S102 (12 bits resolution)
+ * chips. The ADC108S102 effectively returns a 12-bit result with the 2
+ * least-significant bits unset.
+ */
+#define ADC108S102_BITS		12
+#define ADC108S102_MAX_CHANNELS	8
+
+/*
+ * 16-bit SPI command format:
+ *   [15:14] Ignored
+ *   [13:11] 3-bit channel address
+ *   [10:0]  Ignored
+ */
+#define ADC108S102_CMD(ch)		((u16)(ch) << 11)
+
+/*
+ * 16-bit SPI response format:
+ *   [15:12] Zeros
+ *   [11:0]  12-bit ADC sample (for ADC108S102, [1:0] will always be 0).
+ */
+#define ADC108S102_RES_DATA(res)	((u16)res & GENMASK(11, 0))
+
+struct adc108s102_state {
+	struct spi_device		*spi;
+	struct regulator		*reg;
+	u32				va_millivolt;
+	/* SPI transfer used by triggered buffer handler*/
+	struct spi_transfer		ring_xfer;
+	/* SPI transfer used by direct scan */
+	struct spi_transfer		scan_single_xfer;
+	/* SPI message used by ring_xfer SPI transfer */
+	struct spi_message		ring_msg;
+	/* SPI message used by scan_single_xfer SPI transfer */
+	struct spi_message		scan_single_msg;
+
+	/*
+	 * SPI message buffers:
+	 *  tx_buf: |C0|C1|C2|C3|C4|C5|C6|C7|XX|
+	 *  rx_buf: |XX|R0|R1|R2|R3|R4|R5|R6|R7|tt|tt|tt|tt|
+	 *
+	 *  tx_buf: 8 channel read commands, plus 1 dummy command
+	 *  rx_buf: 1 dummy response, 8 channel responses
+	 */
+	__be16				rx_buf[9] __aligned(IIO_DMA_MINALIGN);
+	__be16				tx_buf[9] __aligned(IIO_DMA_MINALIGN);
+};
+
+#define ADC108S102_V_CHAN(index)					\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = index,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			BIT(IIO_CHAN_INFO_SCALE),			\
+		.address = index,					\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = ADC108S102_BITS,			\
+			.storagebits = 16,				\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+static const struct iio_chan_spec adc108s102_channels[] = {
+	ADC108S102_V_CHAN(0),
+	ADC108S102_V_CHAN(1),
+	ADC108S102_V_CHAN(2),
+	ADC108S102_V_CHAN(3),
+	ADC108S102_V_CHAN(4),
+	ADC108S102_V_CHAN(5),
+	ADC108S102_V_CHAN(6),
+	ADC108S102_V_CHAN(7),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static int adc108s102_update_scan_mode(struct iio_dev *indio_dev,
+		unsigned long const *active_scan_mask)
+{
+	struct adc108s102_state *st = iio_priv(indio_dev);
+	unsigned int bit, cmds;
+
+	/*
+	 * Fill in the first x shorts of tx_buf with the number of channels
+	 * enabled for sampling by the triggered buffer.
+	 */
+	cmds = 0;
+	for_each_set_bit(bit, active_scan_mask, ADC108S102_MAX_CHANNELS)
+		st->tx_buf[cmds++] = cpu_to_be16(ADC108S102_CMD(bit));
+
+	/* One dummy command added, to clock in the last response */
+	st->tx_buf[cmds++] = 0x00;
+
+	/* build SPI ring message */
+	st->ring_xfer.tx_buf = &st->tx_buf[0];
+	st->ring_xfer.rx_buf = &st->rx_buf[0];
+	st->ring_xfer.len = cmds * sizeof(st->tx_buf[0]);
+
+	spi_message_init_with_transfers(&st->ring_msg, &st->ring_xfer, 1);
+
+	return 0;
+}
+
+static irqreturn_t adc108s102_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adc108s102_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = spi_sync(st->spi, &st->ring_msg);
+	if (ret < 0)
+		goto out_notify;
+
+	/* Skip the dummy response in the first slot */
+	iio_push_to_buffers_with_ts_unaligned(indio_dev,
+					      &st->rx_buf[1],
+					      st->ring_xfer.len - sizeof(st->rx_buf[1]),
+					      iio_get_time_ns(indio_dev));
+
+out_notify:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int adc108s102_scan_direct(struct adc108s102_state *st, unsigned int ch)
+{
+	int ret;
+
+	st->tx_buf[0] = cpu_to_be16(ADC108S102_CMD(ch));
+	ret = spi_sync(st->spi, &st->scan_single_msg);
+	if (ret)
+		return ret;
+
+	/* Skip the dummy response in the first slot */
+	return be16_to_cpu(st->rx_buf[1]);
+}
+
+static int adc108s102_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long m)
+{
+	struct adc108s102_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = adc108s102_scan_direct(st, chan->address);
+
+		iio_device_release_direct_mode(indio_dev);
+
+		if (ret < 0)
+			return ret;
+
+		*val = ADC108S102_RES_DATA(ret);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_VOLTAGE)
+			break;
+
+		*val = st->va_millivolt;
+		*val2 = chan->scan_type.realbits;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info adc108s102_info = {
+	.read_raw		= &adc108s102_read_raw,
+	.update_scan_mode	= &adc108s102_update_scan_mode,
+};
+
+static void adc108s102_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+static int adc108s102_probe(struct spi_device *spi)
+{
+	struct adc108s102_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	if (ACPI_COMPANION(&spi->dev)) {
+		st->va_millivolt = ADC108S102_VA_MV_ACPI_DEFAULT;
+	} else {
+		st->reg = devm_regulator_get(&spi->dev, "vref");
+		if (IS_ERR(st->reg))
+			return PTR_ERR(st->reg);
+
+		ret = regulator_enable(st->reg);
+		if (ret < 0) {
+			dev_err(&spi->dev, "Cannot enable vref regulator\n");
+			return ret;
+		}
+		ret = devm_add_action_or_reset(&spi->dev, adc108s102_reg_disable,
+					       st->reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0) {
+			dev_err(&spi->dev, "vref get voltage failed\n");
+			return ret;
+		}
+
+		st->va_millivolt = ret / 1000;
+	}
+
+	st->spi = spi;
+
+	indio_dev->name = spi->modalias;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = adc108s102_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adc108s102_channels);
+	indio_dev->info = &adc108s102_info;
+
+	/* Setup default message */
+	st->scan_single_xfer.tx_buf = st->tx_buf;
+	st->scan_single_xfer.rx_buf = st->rx_buf;
+	st->scan_single_xfer.len = 2 * sizeof(st->tx_buf[0]);
+
+	spi_message_init_with_transfers(&st->scan_single_msg,
+					&st->scan_single_xfer, 1);
+
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+					      &adc108s102_trigger_handler,
+					      NULL);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		dev_err(&spi->dev, "Failed to register IIO device\n");
+	return ret;
+}
+
+static const struct of_device_id adc108s102_of_match[] = {
+	{ .compatible = "ti,adc108s102" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc108s102_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id adc108s102_acpi_ids[] = {
+	{ "INT3495", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, adc108s102_acpi_ids);
+#endif
+
+static const struct spi_device_id adc108s102_id[] = {
+	{ "adc108s102", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adc108s102_id);
+
+static struct spi_driver adc108s102_driver = {
+	.driver = {
+		.name   = "adc108s102",
+		.of_match_table = adc108s102_of_match,
+		.acpi_match_table = ACPI_PTR(adc108s102_acpi_ids),
+	},
+	.probe		= adc108s102_probe,
+	.id_table	= adc108s102_id,
+};
+module_spi_driver(adc108s102_driver);
+
+MODULE_AUTHOR("Bogdan Pricop <bogdan.pricop@emutex.com>");
+MODULE_DESCRIPTION("Texas Instruments ADC108S102 and ADC128S102 driver");
+MODULE_LICENSE("GPL v2");