Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

37 files changed, 7057 insertions, 0 deletions

diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
new file mode 100644
index 000000000..1ccb5ccf3
--- /dev/null
+++ b/drivers/iio/common/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IIO common modules
+#
+
+source "drivers/iio/common/cros_ec_sensors/Kconfig"
+source "drivers/iio/common/hid-sensors/Kconfig"
+source "drivers/iio/common/inv_sensors/Kconfig"
+source "drivers/iio/common/ms_sensors/Kconfig"
+source "drivers/iio/common/scmi_sensors/Kconfig"
+source "drivers/iio/common/ssp_sensors/Kconfig"
+source "drivers/iio/common/st_sensors/Kconfig"
diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
new file mode 100644
index 000000000..d3e952239
--- /dev/null
+++ b/drivers/iio/common/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the IIO common modules.
+# Common modules contains modules, which can be shared among multiple
+# IIO modules. For example if the trigger processing is common for
+# multiple IIO modules then this can be moved to a common module
+# instead of duplicating in each module.
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-y += cros_ec_sensors/
+obj-y += hid-sensors/
+obj-y += inv_sensors/
+obj-y += ms_sensors/
+obj-y += scmi_sensors/
+obj-y += ssp_sensors/
+obj-y += st_sensors/
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
new file mode 100644
index 000000000..fefad9572
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Chrome OS Embedded Controller managed sensors library
+#
+config IIO_CROS_EC_SENSORS_CORE
+	tristate "ChromeOS EC Sensors Core"
+	depends on SYSFS && CROS_EC_SENSORHUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Base module for the ChromeOS EC Sensors module.
+	  Contains core functions used by other IIO CrosEC sensor
+	  drivers.
+	  Define common attributes and sysfs interrupt handler.
+
+config IIO_CROS_EC_SENSORS
+	tristate "ChromeOS EC Contiguous Sensors"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to handle 3d contiguous sensors like
+	  Accelerometers, Gyroscope and Magnetometer that are
+	  presented by the ChromeOS EC Sensor hub.
+	  Creates an IIO device for each functions.
+
+config IIO_CROS_EC_SENSORS_LID_ANGLE
+	tristate "ChromeOS EC Sensor for lid angle"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to report the angle between lid and base for some
+	  convertible devices.
+	  This module is loaded when the EC can calculate the angle between the base
+	  and the lid.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
new file mode 100644
index 000000000..e0a33ab66
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for sensors seen through the ChromeOS EC sensor hub.
+#
+
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
new file mode 100644
index 000000000..119acb078
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about counter sensors. Counters are presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "cros-ec-lid-angle"
+
+/*
+ * One channel for the lid angle, the other for timestamp.
+ */
+static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
+	{
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type.realbits = CROS_EC_SENSOR_BITS,
+		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
+		.scan_type.sign = 'u',
+		.type = IIO_ANGL
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_lid_angle_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+};
+
+static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
+					  unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
+	if (ret) {
+		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
+		return ret;
+	}
+
+	*data = st->resp->lid_angle.value;
+	return 0;
+}
+
+static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    int *val, int *val2, long mask)
+{
+	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
+	s16 data;
+	int ret;
+
+	mutex_lock(&st->core.cmd_lock);
+	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
+	if (ret == 0) {
+		*val = data;
+		ret = IIO_VAL_INT;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+	return ret;
+}
+
+static const struct iio_info cros_ec_lid_angle_info = {
+	.read_raw = &cros_ec_lid_angle_read,
+};
+
+static int cros_ec_lid_angle_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_lid_angle_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false, NULL);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &cros_ec_lid_angle_info;
+	state = iio_priv(indio_dev);
+	indio_dev->channels = cros_ec_lid_angle_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
+
+	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+			cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	return cros_ec_sensors_core_register(dev, indio_dev, NULL);
+}
+
+static const struct platform_device_id cros_ec_lid_angle_ids[] = {
+	{
+		.name = DRV_NAME,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
+
+static struct platform_driver cros_ec_lid_angle_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+	},
+	.probe		= cros_ec_lid_angle_probe,
+	.id_table	= cros_ec_lid_angle_ids,
+};
+module_platform_driver(cros_ec_lid_angle_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
new file mode 100644
index 000000000..66153b185
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_sensors - Driver for Chrome OS Embedded Controller sensors.
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about sensors data. Data access is presented through iio sysfs.
+ */
+
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CROS_EC_SENSORS_MAX_CHANNELS 4
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+
+	struct iio_chan_spec channels[CROS_EC_SENSORS_MAX_CHANNELS];
+};
+
+static int cros_ec_sensors_read(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	s16 data = 0;
+	s64 val64;
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = st->core.read_ec_sensors_data(indio_dev, 1 << idx, &data);
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
+		*val = data;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].offset =
+				st->core.resp->sensor_offset.offset[i];
+		ret = IIO_VAL_INT;
+		*val = st->core.calib[idx].offset;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == -EPROTO || ret == -EOPNOTSUPP) {
+			/* Reading calibscale is not supported on older EC. */
+			*val = 1;
+			*val2 = 0;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		} else if (ret) {
+			break;
+		}
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].scale =
+				st->core.resp->sensor_scale.scale[i];
+
+		*val = st->core.calib[idx].scale >> 15;
+		*val2 = ((st->core.calib[idx].scale & 0x7FFF) * 1000000LL) /
+			MOTION_SENSE_DEFAULT_SCALE;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		val64 = st->core.resp->sensor_range.ret;
+		switch (st->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			/*
+			 * EC returns data in g, iio exepects m/s^2.
+			 * Do not use IIO_G_TO_M_S_2 to avoid precision loss.
+			 */
+			*val = div_s64(val64 * 980665, 10);
+			*val2 = 10000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			/*
+			 * EC returns data in dps, iio expects rad/s.
+			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
+			 * loss. Round to the nearest integer.
+			 */
+			*val = 0;
+			*val2 = div_s64(val64 * 3141592653ULL,
+					180 << (CROS_EC_SENSOR_BITS - 1));
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			/*
+			 * EC returns data in 16LSB / uT,
+			 * iio expects Gauss
+			 */
+			*val = val64;
+			*val2 = 100 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_read(&st->core, chan, val, val2,
+						mask);
+		break;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static int cros_ec_sensors_write(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.calib[idx].offset = val;
+
+		/* Send to EC for each axis, even if not complete */
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_offset.offset[i] =
+				st->core.calib[i].offset;
+		st->core.param.sensor_offset.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.calib[idx].scale = val;
+		/* Send to EC for each axis, even if not complete */
+
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_scale.scale[i] =
+				st->core.calib[i].scale;
+		st->core.param.sensor_scale.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
+			ret = -EINVAL;
+			break;
+		}
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->core.param.sensor_range.roundup = 1;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == 0) {
+			st->core.range_updated = true;
+			st->core.curr_range = val;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_write(
+				&st->core, chan, val, val2, mask);
+		break;
+	}
+
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static const struct iio_info ec_sensors_info = {
+	.read_raw = &cros_ec_sensors_read,
+	.write_raw = &cros_ec_sensors_write,
+	.read_avail = &cros_ec_sensors_core_read_avail,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_sensors_state *state;
+	struct iio_chan_spec *channel;
+	int ret, i;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &ec_sensors_info;
+	state = iio_priv(indio_dev);
+	for (channel = state->channels, i = CROS_EC_SENSOR_X;
+	     i < CROS_EC_SENSOR_MAX_AXIS; i++, channel++) {
+		/* Common part */
+		channel->info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE);
+		channel->info_mask_shared_by_all =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
+		channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
+		channel->scan_index = i;
+		channel->ext_info = cros_ec_sensors_ext_info;
+		channel->modified = 1;
+		channel->channel2 = IIO_MOD_X + i;
+		channel->scan_type.sign = 's';
+
+		/* Sensor specific */
+		switch (state->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			channel->type = IIO_ACCEL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			channel->type = IIO_ANGL_VEL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			channel->type = IIO_MAGN;
+			break;
+		default:
+			dev_err(&pdev->dev, "Unknown motion sensor\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Timestamp */
+	channel->type = IIO_TIMESTAMP;
+	channel->channel = -1;
+	channel->scan_index = CROS_EC_SENSOR_MAX_AXIS;
+	channel->scan_type.sign = 's';
+	channel->scan_type.realbits = 64;
+	channel->scan_type.storagebits = 64;
+
+	indio_dev->channels = state->channels;
+	indio_dev->num_channels = CROS_EC_SENSORS_MAX_CHANNELS;
+
+	/* There is only enough room for accel and gyro in the io space */
+	if ((state->core.ec->cmd_readmem != NULL) &&
+	    (state->core.type != MOTIONSENSE_TYPE_MAG))
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_lpc;
+	else
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+	return cros_ec_sensors_core_register(dev, indio_dev,
+			cros_ec_sensors_push_data);
+}
+
+static const struct platform_device_id cros_ec_sensors_ids[] = {
+	{
+		.name = "cros-ec-accel",
+	},
+	{
+		.name = "cros-ec-gyro",
+	},
+	{
+		.name = "cros-ec-mag",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+	.driver = {
+		.name	= "cros-ec-sensors",
+		.pm	= &cros_ec_sensors_pm_ops,
+	},
+	.probe		= cros_ec_sensors_probe,
+	.id_table	= cros_ec_sensors_ids,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC 3-axis sensors driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
new file mode 100644
index 000000000..6bfe5d684
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_sensors_core - Common function for Chrome OS EC sensor driver.
+ *
+ * Copyright (C) 2016 Google, Inc
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+#include <linux/platform_device.h>
+
+/*
+ * Hard coded to the first device to support sensor fifo.  The EC has a 2048
+ * byte fifo and will trigger an interrupt when fifo is 2/3 full.
+ */
+#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
+
+static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
+					     u16 cmd_offset, u16 cmd, u32 *mask)
+{
+	int ret;
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_params_get_cmd_versions params;
+			struct ec_response_get_cmd_versions resp;
+		};
+	} __packed buf = {
+		.msg = {
+			.command = EC_CMD_GET_CMD_VERSIONS + cmd_offset,
+			.insize = sizeof(struct ec_response_get_cmd_versions),
+			.outsize = sizeof(struct ec_params_get_cmd_versions)
+			},
+		.params = {.cmd = cmd}
+	};
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, &buf.msg);
+	if (ret >= 0)
+		*mask = buf.resp.version_mask;
+	return ret;
+}
+
+static void get_default_min_max_freq(enum motionsensor_type type,
+				     u32 *min_freq,
+				     u32 *max_freq,
+				     u32 *max_fifo_events)
+{
+	/*
+	 * We don't know fifo size, set to size previously used by older
+	 * hardware.
+	 */
+	*max_fifo_events = CROS_EC_FIFO_SIZE;
+
+	switch (type) {
+	case MOTIONSENSE_TYPE_ACCEL:
+		*min_freq = 12500;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_GYRO:
+		*min_freq = 25000;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_MAG:
+		*min_freq = 5000;
+		*max_freq = 25000;
+		break;
+	case MOTIONSENSE_TYPE_PROX:
+	case MOTIONSENSE_TYPE_LIGHT:
+		*min_freq = 100;
+		*max_freq = 50000;
+		break;
+	case MOTIONSENSE_TYPE_BARO:
+		*min_freq = 250;
+		*max_freq = 20000;
+		break;
+	case MOTIONSENSE_TYPE_ACTIVITY:
+	default:
+		*min_freq = 0;
+		*max_freq = 0;
+		break;
+	}
+}
+
+static int cros_ec_sensor_set_ec_rate(struct cros_ec_sensors_core_state *st,
+				      int rate)
+{
+	int ret;
+
+	if (rate > U16_MAX)
+		rate = U16_MAX;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = rate;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	mutex_unlock(&st->cmd_lock);
+	return ret;
+}
+
+static ssize_t cros_ec_sensor_set_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int integer, fract, ret;
+	int latency;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
+	if (ret)
+		return ret;
+
+	/* EC rate is in ms. */
+	latency = integer * 1000 + fract / 1000;
+	ret = cros_ec_sensor_set_ec_rate(st, latency);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cros_ec_sensor_get_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int latency, ret;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = EC_MOTION_SENSE_NO_VALUE;
+
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	latency = st->resp->ec_rate.ret;
+	mutex_unlock(&st->cmd_lock);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d.%06u\n",
+		       latency / 1000,
+		       (latency % 1000) * 1000);
+}
+
+static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
+		       cros_ec_sensor_get_report_latency,
+		       cros_ec_sensor_set_report_latency, 0);
+
+static ssize_t hwfifo_watermark_max_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", st->fifo_max_event_count);
+}
+
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+
+static const struct iio_dev_attr *cros_ec_sensor_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_timeout,
+	&iio_dev_attr_hwfifo_watermark_max,
+	NULL,
+};
+
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	s16 *out;
+	s64 delta;
+	unsigned int i;
+
+	/*
+	 * Ignore samples if the buffer is not set: it is needed if the ODR is
+	 * set but the buffer is not enabled yet.
+	 *
+	 * Note: iio_device_claim_buffer_mode() returns -EBUSY if the buffer
+	 * is not enabled.
+	 */
+	if (iio_device_claim_buffer_mode(indio_dev) < 0)
+		return 0;
+
+	out = (s16 *)st->samples;
+	for_each_set_bit(i,
+			 indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		*out = data[i];
+		out++;
+	}
+
+	if (iio_device_get_clock(indio_dev) != CLOCK_BOOTTIME)
+		delta = iio_get_time_ns(indio_dev) - cros_ec_get_time_ns();
+	else
+		delta = 0;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   timestamp + delta);
+
+	iio_device_release_buffer_mode(indio_dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
+
+static void cros_ec_sensors_core_clean(void *arg)
+{
+	struct platform_device *pdev = (struct platform_device *)arg;
+	struct cros_ec_sensorhub *sensor_hub =
+		dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	u8 sensor_num = st->param.info.sensor_num;
+
+	cros_ec_sensorhub_unregister_push_data(sensor_hub, sensor_num);
+}
+
+/**
+ * cros_ec_sensors_core_init() - basic initialization of the core structure
+ * @pdev:		platform device created for the sensor
+ * @indio_dev:		iio device structure of the device
+ * @physical_device:	true if the device refers to a physical device
+ * @trigger_capture:    function pointer to call buffer is triggered,
+ *    for backward compatibility.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev,
+			      bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+	struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
+	struct cros_ec_dev *ec = sensor_hub->ec;
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	u32 ver_mask, temp;
+	int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
+	int ret, i;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	state->ec = ec->ec_dev;
+	state->msg = devm_kzalloc(&pdev->dev, sizeof(*state->msg) +
+				max((u16)sizeof(struct ec_params_motion_sense),
+				state->ec->max_response), GFP_KERNEL);
+	if (!state->msg)
+		return -ENOMEM;
+
+	state->resp = (struct ec_response_motion_sense *)state->msg->data;
+
+	mutex_init(&state->cmd_lock);
+
+	ret = cros_ec_get_host_cmd_version_mask(state->ec,
+						ec->cmd_offset,
+						EC_CMD_MOTION_SENSE_CMD,
+						&ver_mask);
+	if (ret < 0)
+		return ret;
+
+	/* Set up the host command structure. */
+	state->msg->version = fls(ver_mask) - 1;
+	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	state->msg->outsize = sizeof(struct ec_params_motion_sense);
+
+	indio_dev->name = pdev->name;
+
+	if (physical_device) {
+		enum motionsensor_location loc;
+
+		state->param.cmd = MOTIONSENSE_CMD_INFO;
+		state->param.info.sensor_num = sensor_platform->sensor_num;
+		ret = cros_ec_motion_send_host_cmd(state, 0);
+		if (ret) {
+			dev_warn(dev, "Can not access sensor info\n");
+			return ret;
+		}
+		state->type = state->resp->info.type;
+		loc = state->resp->info.location;
+		if (loc == MOTIONSENSE_LOC_BASE)
+			indio_dev->label = "accel-base";
+		else if (loc == MOTIONSENSE_LOC_LID)
+			indio_dev->label = "accel-display";
+		else if (loc == MOTIONSENSE_LOC_CAMERA)
+			indio_dev->label = "accel-camera";
+
+		/* Set sign vector, only used for backward compatibility. */
+		memset(state->sign, 1, CROS_EC_SENSOR_MAX_AXIS);
+
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
+
+		/* 0 is a correct value used to stop the device */
+		if (state->msg->version < 3) {
+			get_default_min_max_freq(state->resp->info.type,
+						 &frequencies[1],
+						 &frequencies[2],
+						 &state->fifo_max_event_count);
+		} else {
+			if (state->resp->info_3.max_frequency == 0) {
+				get_default_min_max_freq(state->resp->info.type,
+							 &frequencies[1],
+							 &frequencies[2],
+							 &temp);
+			} else {
+				frequencies[1] = state->resp->info_3.min_frequency;
+				frequencies[2] = state->resp->info_3.max_frequency;
+			}
+			state->fifo_max_event_count = state->resp->info_3.fifo_max_event_count;
+		}
+		for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
+			state->frequencies[2 * i] = frequencies[i] / 1000;
+			state->frequencies[2 * i + 1] =
+				(frequencies[i] % 1000) * 1000;
+		}
+
+		if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+			/*
+			 * Create a software buffer, feed by the EC FIFO.
+			 * We can not use trigger here, as events are generated
+			 * as soon as sample_frequency is set.
+			 */
+			ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev, NULL,
+							      cros_ec_sensor_fifo_attributes);
+			if (ret)
+				return ret;
+
+			/* Timestamp coming from FIFO are in ns since boot. */
+			ret = iio_device_set_clock(indio_dev, CLOCK_BOOTTIME);
+			if (ret)
+				return ret;
+
+		} else {
+			/*
+			 * The only way to get samples in buffer is to set a
+			 * software trigger (systrig, hrtimer).
+			 */
+			ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					NULL, trigger_capture, NULL);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
+
+/**
+ * cros_ec_sensors_core_register() - Register callback to FIFO and IIO when
+ * sensor is ready.
+ * It must be called at the end of the sensor probe routine.
+ * @dev:		device created for the sensor
+ * @indio_dev:		iio device structure of the device
+ * @push_data:          function to call when cros_ec_sensorhub receives
+ *    a sample for that sensor.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_core_register(struct device *dev,
+				  struct iio_dev *indio_dev,
+				  cros_ec_sensorhub_push_data_cb_t push_data)
+{
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_dev *ec = sensor_hub->ec;
+	int ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	if (!push_data ||
+	    !cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return 0;
+
+	ret = cros_ec_sensorhub_register_push_data(
+			sensor_hub, sensor_platform->sensor_num,
+			indio_dev, push_data);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(
+			dev, cros_ec_sensors_core_clean, pdev);
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_register);
+
+/**
+ * cros_ec_motion_send_host_cmd() - send motion sense host command
+ * @state:		pointer to state information for device
+ * @opt_length:	optional length to reduce the response size, useful on the data
+ *		path. Otherwise, the maximal allowed response size is used
+ *
+ * When called, the sub-command is assumed to be set in param->cmd.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
+				 u16 opt_length)
+{
+	int ret;
+
+	if (opt_length)
+		state->msg->insize = min(opt_length, state->ec->max_response);
+	else
+		state->msg->insize = state->ec->max_response;
+
+	memcpy(state->msg->data, &state->param, sizeof(state->param));
+
+	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
+	if (ret < 0)
+		return ret;
+
+	if (ret &&
+	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
+		memcpy(state->resp, state->msg->data, ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_motion_send_host_cmd);
+
+static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		const char *buf, size_t len)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret, i;
+	bool calibrate;
+
+	ret = kstrtobool(buf, &calibrate);
+	if (ret < 0)
+		return ret;
+	if (!calibrate)
+		return -EINVAL;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_PERFORM_CALIB;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to calibrate sensor\n");
+	} else {
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->calib[i].offset = st->resp->perform_calib.offset[i];
+	}
+	mutex_unlock(&st->cmd_lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev,
+				  uintptr_t private,
+				  const struct iio_chan_spec *chan, char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", st->param.info.sensor_num);
+}
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
+	{
+		.name = "calibrate",
+		.shared = IIO_SHARED_BY_ALL,
+		.write = cros_ec_sensors_calibrate
+	},
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
+	{ },
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
+
+/**
+ * cros_ec_sensors_idx_to_reg - convert index into offset in shared memory
+ * @st:		pointer to state information for device
+ * @idx:	sensor index (should be element of enum sensor_index)
+ *
+ * Return:	address to read at
+ */
+static unsigned int cros_ec_sensors_idx_to_reg(
+					struct cros_ec_sensors_core_state *st,
+					unsigned int idx)
+{
+	/*
+	 * When using LPC interface, only space for 2 Accel and one Gyro.
+	 * First halfword of MOTIONSENSE_TYPE_ACCEL is used by angle.
+	 */
+	if (st->type == MOTIONSENSE_TYPE_ACCEL)
+		return EC_MEMMAP_ACC_DATA + sizeof(u16) *
+			(1 + idx + st->param.info.sensor_num *
+			 CROS_EC_SENSOR_MAX_AXIS);
+
+	return EC_MEMMAP_GYRO_DATA + sizeof(u16) * idx;
+}
+
+static int cros_ec_sensors_cmd_read_u8(struct cros_ec_device *ec,
+				       unsigned int offset, u8 *dest)
+{
+	return ec->cmd_readmem(ec, offset, 1, dest);
+}
+
+static int cros_ec_sensors_cmd_read_u16(struct cros_ec_device *ec,
+					 unsigned int offset, u16 *dest)
+{
+	__le16 tmp;
+	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
+
+	if (ret >= 0)
+		*dest = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+/**
+ * cros_ec_sensors_read_until_not_busy() - read until is not busy
+ *
+ * @st:	pointer to state information for device
+ *
+ * Read from EC status byte until it reads not busy.
+ * Return: 8-bit status if ok, -errno on failure.
+ */
+static int cros_ec_sensors_read_until_not_busy(
+					struct cros_ec_sensors_core_state *st)
+{
+	struct cros_ec_device *ec = st->ec;
+	u8 status;
+	int ret, attempts = 0;
+
+	ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
+		/* Give up after enough attempts, return error. */
+		if (attempts++ >= 50)
+			return -EIO;
+
+		/* Small delay every so often. */
+		if (attempts % 5 == 0)
+			msleep(25);
+
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return status;
+}
+
+/**
+ * cros_ec_sensors_read_data_unsafe() - read acceleration data from EC shared memory
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * This is the unsafe function for reading the EC data. It does not guarantee
+ * that the EC will not modify the data as it is being read in.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+static int cros_ec_sensors_read_data_unsafe(struct iio_dev *indio_dev,
+			 unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	unsigned int i;
+	int ret;
+
+	/* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		ret = cros_ec_sensors_cmd_read_u16(ec,
+					     cros_ec_sensors_idx_to_reg(st, i),
+					     data);
+		if (ret < 0)
+			return ret;
+
+		*data *= st->sign[i];
+		data++;
+	}
+
+	return 0;
+}
+
+/**
+ * cros_ec_sensors_read_lpc() - read acceleration data from EC shared memory.
+ * @indio_dev: pointer to IIO device.
+ * @scan_mask: bitmap of the sensor indices to scan.
+ * @data: location to store data.
+ *
+ * Note: this is the safe function for reading the EC data. It guarantees
+ * that the data sampled was not modified by the EC while being read.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	u8 samp_id = 0xff, status = 0;
+	int ret, attempts = 0;
+
+	/*
+	 * Continually read all data from EC until the status byte after
+	 * all reads reflects that the EC is not busy and the sample id
+	 * matches the sample id from before all reads. This guarantees
+	 * that data read in was not modified by the EC while reading.
+	 */
+	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
+			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
+		/* If we have tried to read too many times, return error. */
+		if (attempts++ >= 5)
+			return -EIO;
+
+		/* Read status byte until EC is not busy. */
+		ret = cros_ec_sensors_read_until_not_busy(st);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Store the current sample id so that we can compare to the
+		 * sample id after reading the data.
+		 */
+		samp_id = ret & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
+
+		/* Read all EC data, format it, and store it into data. */
+		ret = cros_ec_sensors_read_data_unsafe(indio_dev, scan_mask,
+						       data);
+		if (ret < 0)
+			return ret;
+
+		/* Read status byte. */
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc);
+
+/**
+ * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int i;
+
+	/* Read all sensor data through a command. */
+	st->param.cmd = MOTIONSENSE_CMD_DATA;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->data));
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
+
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		*data = st->resp->data.data[i];
+		data++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd);
+
+/**
+ * cros_ec_sensors_capture() - the trigger handler function
+ * @irq:	the interrupt number.
+ * @p:		a pointer to the poll function.
+ *
+ * On a trigger event occurring, if the pollfunc is attached then this
+ * handler is called as a threaded interrupt (and hence may sleep). It
+ * is responsible for grabbing data from the device and pushing it into
+ * the associated buffer.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t cros_ec_sensors_capture(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->cmd_lock);
+
+	/* Clear capture data. */
+	memset(st->samples, 0, indio_dev->scan_bytes);
+
+	/* Read data based on which channels are enabled in scan mask. */
+	ret = st->read_ec_sensors_data(indio_dev,
+				       *(indio_dev->active_scan_mask),
+				       (s16 *)st->samples);
+	if (ret < 0)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   iio_get_time_ns(indio_dev));
+
+done:
+	/*
+	 * Tell the core we are done with this trigger and ready for the
+	 * next one.
+	 */
+	iio_trigger_notify_done(indio_dev->trig);
+
+	mutex_unlock(&st->cmd_lock);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_capture);
+
+/**
+ * cros_ec_sensors_core_read() - function to request a value from the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	will contain one element making up the returned value
+ * @val2:	will contain another element making up the returned value
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	int ret, frequency;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		frequency = st->resp->sensor_odr.ret;
+		*val = frequency / 1000;
+		*val2 = (frequency % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
+
+/**
+ * cros_ec_sensors_core_read_avail() - get available values
+ * @indio_dev:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @vals:	list of available values
+ * @type:	type of data returned
+ * @length:	number of data returned in the array
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST
+ */
+int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    const int **vals,
+				    int *type,
+				    int *length,
+				    long mask)
+{
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(state->frequencies);
+		*vals = (const int *)&state->frequencies;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read_avail);
+
+/**
+ * cros_ec_sensors_core_write() - function to write a value to the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	first part of value to write
+ * @val2:	second part of value to write
+ * @mask:	specifies which values to write
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	int ret, frequency;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		frequency = val * 1000 + val2 / 1000;
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data = frequency;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->param.sensor_odr.roundup = 1;
+
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
+
+static int __maybe_unused cros_ec_sensors_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (st->range_updated) {
+		mutex_lock(&st->cmd_lock);
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->param.sensor_range.data = st->curr_range;
+		st->param.sensor_range.roundup = 1;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		mutex_unlock(&st->cmd_lock);
+	}
+	return ret;
+}
+
+SIMPLE_DEV_PM_OPS(cros_ec_sensors_pm_ops, NULL, cros_ec_sensors_resume);
+EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
+
+MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
new file mode 100644
index 000000000..2a3dd3b90
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Hid Sensor common modules
+#
+menu "Hid Sensor IIO Common"
+
+config HID_SENSOR_IIO_COMMON
+	tristate "Common modules for all HID Sensor IIO drivers"
+	depends on HID_SENSOR_HUB
+	select HID_SENSOR_IIO_TRIGGER if IIO_BUFFER
+	help
+	  Say yes here to build support for HID sensor to use
+	  HID sensor common processing for attributes and IIO triggers.
+	  There are many attributes which can be shared among multiple
+	  HID sensor drivers, this module contains processing for those
+	  attributes.
+
+config HID_SENSOR_IIO_TRIGGER
+	tristate "Common module (trigger) for all HID Sensor IIO drivers"
+	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
+	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build trigger support for HID sensors.
+	  Triggers will be send if all requested attributes were read.
+
+	  If this driver is compiled as a module, it will be named
+	  hid-sensor-trigger.
+
+endmenu
diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile
new file mode 100644
index 000000000..64b01a81f
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Hid sensor common modules.
+#
+
+obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o
+obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o
+hid-sensor-iio-common-y := hid-sensor-attributes.o
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
new file mode 100644
index 000000000..9b279937a
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/units.h>
+
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+
+static struct {
+	u32 usage_id;
+	int unit; /* 0 for default others from HID sensor spec */
+	int scale_val0; /* scale, whole number */
+	int scale_val1; /* scale, fraction in nanos */
+} unit_conversion[] = {
+	{HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650000},
+	{HID_USAGE_SENSOR_ACCEL_3D,
+		HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0},
+	{HID_USAGE_SENSOR_ACCEL_3D,
+		HID_USAGE_SENSOR_UNITS_G, 9, 806650000},
+
+	{HID_USAGE_SENSOR_GRAVITY_VECTOR, 0, 9, 806650000},
+	{HID_USAGE_SENSOR_GRAVITY_VECTOR,
+		HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0},
+	{HID_USAGE_SENSOR_GRAVITY_VECTOR,
+		HID_USAGE_SENSOR_UNITS_G, 9, 806650000},
+
+	{HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453293},
+	{HID_USAGE_SENSOR_GYRO_3D,
+		HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0},
+	{HID_USAGE_SENSOR_GYRO_3D,
+		HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453293},
+
+	{HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000000},
+	{HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0},
+
+	{HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453293},
+	{HID_USAGE_SENSOR_INCLINOMETER_3D,
+		HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293},
+	{HID_USAGE_SENSOR_INCLINOMETER_3D,
+		HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0},
+
+	{HID_USAGE_SENSOR_ALS, 0, 1, 0},
+	{HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0},
+
+	{HID_USAGE_SENSOR_PRESSURE, 0, 100, 0},
+	{HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000},
+
+	{HID_USAGE_SENSOR_TIME_TIMESTAMP, 0, 1000000000, 0},
+	{HID_USAGE_SENSOR_TIME_TIMESTAMP, HID_USAGE_SENSOR_UNITS_MILLISECOND,
+		1000000, 0},
+
+	{HID_USAGE_SENSOR_DEVICE_ORIENTATION, 0, 1, 0},
+
+	{HID_USAGE_SENSOR_RELATIVE_ORIENTATION, 0, 1, 0},
+
+	{HID_USAGE_SENSOR_GEOMAGNETIC_ORIENTATION, 0, 1, 0},
+
+	{HID_USAGE_SENSOR_TEMPERATURE, 0, 1000, 0},
+	{HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0},
+
+	{HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0},
+	{HID_USAGE_SENSOR_HINGE, 0, 0, 17453293},
+	{HID_USAGE_SENSOR_HINGE, HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293},
+};
+
+static void simple_div(int dividend, int divisor, int *whole,
+				int *micro_frac)
+{
+	int rem;
+	int exp = 0;
+
+	*micro_frac = 0;
+	if (divisor == 0) {
+		*whole = 0;
+		return;
+	}
+	*whole = dividend/divisor;
+	rem = dividend % divisor;
+	if (rem) {
+		while (rem <= divisor) {
+			rem *= 10;
+			exp++;
+		}
+		*micro_frac = (rem / divisor) * int_pow(10, 6 - exp);
+	}
+}
+
+static void split_micro_fraction(unsigned int no, int exp, int *val1, int *val2)
+{
+	int divisor = int_pow(10, exp);
+
+	*val1 = no / divisor;
+	*val2 = no % divisor * int_pow(10, 6 - exp);
+}
+
+/*
+VTF format uses exponent and variable size format.
+For example if the size is 2 bytes
+0x0067 with VTF16E14 format -> +1.03
+To convert just change to 0x67 to decimal and use two decimal as E14 stands
+for 10^-2.
+Negative numbers are 2's complement
+*/
+static void convert_from_vtf_format(u32 value, int size, int exp,
+					int *val1, int *val2)
+{
+	int sign = 1;
+
+	if (value & BIT(size*8 - 1)) {
+		value =  ((1LL << (size * 8)) - value);
+		sign = -1;
+	}
+	exp = hid_sensor_convert_exponent(exp);
+	if (exp >= 0) {
+		*val1 = sign * value * int_pow(10, exp);
+		*val2 = 0;
+	} else {
+		split_micro_fraction(value, -exp, val1, val2);
+		if (*val1)
+			*val1 = sign * (*val1);
+		else
+			*val2 = sign * (*val2);
+	}
+}
+
+static u32 convert_to_vtf_format(int size, int exp, int val1, int val2)
+{
+	int divisor;
+	u32 value;
+	int sign = 1;
+
+	if (val1 < 0 || val2 < 0)
+		sign = -1;
+	exp = hid_sensor_convert_exponent(exp);
+	if (exp < 0) {
+		divisor = int_pow(10, 6 + exp);
+		value = abs(val1) * int_pow(10, -exp);
+		value += abs(val2) / divisor;
+	} else {
+		divisor = int_pow(10, exp);
+		value = abs(val1) / divisor;
+	}
+	if (sign < 0)
+		value =  ((1LL << (size * 8)) - value);
+
+	return value;
+}
+
+s32 hid_sensor_read_poll_value(struct hid_sensor_common *st)
+{
+	s32 value = 0;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->poll.report_id,
+				     st->poll.index, sizeof(value), &value);
+
+	if (ret < 0 || value < 0) {
+		return -EINVAL;
+	} else {
+		if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+			value = value * 1000;
+	}
+
+	return value;
+}
+EXPORT_SYMBOL_NS(hid_sensor_read_poll_value, IIO_HID_ATTRIBUTES);
+
+int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
+				int *val1, int *val2)
+{
+	s32 value;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->poll.report_id,
+				     st->poll.index, sizeof(value), &value);
+	if (ret < 0 || value < 0) {
+		*val1 = *val2 = 0;
+		return -EINVAL;
+	} else {
+		if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+			simple_div(1000, value, val1, val2);
+		else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+			simple_div(1, value, val1, val2);
+		else {
+			*val1 = *val2 = 0;
+			return -EINVAL;
+		}
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL_NS(hid_sensor_read_samp_freq_value, IIO_HID);
+
+int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
+				int val1, int val2)
+{
+	s32 value;
+	int ret;
+
+	if (val1 < 0 || val2 < 0)
+		return -EINVAL;
+
+	value = val1 * HZ_PER_MHZ + val2;
+	if (value) {
+		if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+			value = NSEC_PER_SEC / value;
+		else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+			value = USEC_PER_SEC / value;
+		else
+			value = 0;
+	}
+	ret = sensor_hub_set_feature(st->hsdev, st->poll.report_id,
+				     st->poll.index, sizeof(value), &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->poll.report_id,
+				     st->poll.index, sizeof(value), &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	st->poll_interval = value;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_write_samp_freq_value, IIO_HID);
+
+int hid_sensor_read_raw_hyst_value(struct hid_sensor_common *st,
+				int *val1, int *val2)
+{
+	s32 value;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->sensitivity.report_id,
+				     st->sensitivity.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0) {
+		*val1 = *val2 = 0;
+		return -EINVAL;
+	} else {
+		convert_from_vtf_format(value, st->sensitivity.size,
+					st->sensitivity.unit_expo,
+					val1, val2);
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_value, IIO_HID);
+
+int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common *st, int *val1,
+				       int *val2)
+{
+	s32 value;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->sensitivity_rel.report_id,
+				     st->sensitivity_rel.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0) {
+		*val1 = *val2 = 0;
+		return -EINVAL;
+	}
+
+	convert_from_vtf_format(value, st->sensitivity_rel.size,
+				st->sensitivity_rel.unit_expo, val1, val2);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_rel_value, IIO_HID);
+
+
+int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
+					int val1, int val2)
+{
+	s32 value;
+	int ret;
+
+	if (val1 < 0 || val2 < 0)
+		return -EINVAL;
+
+	value = convert_to_vtf_format(st->sensitivity.size,
+				st->sensitivity.unit_expo,
+				val1, val2);
+	ret = sensor_hub_set_feature(st->hsdev, st->sensitivity.report_id,
+				     st->sensitivity.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->sensitivity.report_id,
+				     st->sensitivity.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	st->raw_hystersis = value;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_write_raw_hyst_value, IIO_HID);
+
+int hid_sensor_write_raw_hyst_rel_value(struct hid_sensor_common *st,
+					int val1, int val2)
+{
+	s32 value;
+	int ret;
+
+	if (val1 < 0 || val2 < 0)
+		return -EINVAL;
+
+	value = convert_to_vtf_format(st->sensitivity_rel.size,
+				st->sensitivity_rel.unit_expo,
+				val1, val2);
+	ret = sensor_hub_set_feature(st->hsdev, st->sensitivity_rel.report_id,
+				     st->sensitivity_rel.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->sensitivity_rel.report_id,
+				     st->sensitivity_rel.index, sizeof(value),
+				     &value);
+	if (ret < 0 || value < 0)
+		return -EINVAL;
+
+	st->raw_hystersis = value;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_write_raw_hyst_rel_value, IIO_HID);
+
+/*
+ * This fuction applies the unit exponent to the scale.
+ * For example:
+ * 9.806650000 ->exp:2-> val0[980]val1[665000000]
+ * 9.000806000 ->exp:2-> val0[900]val1[80600000]
+ * 0.174535293 ->exp:2-> val0[17]val1[453529300]
+ * 1.001745329 ->exp:0-> val0[1]val1[1745329]
+ * 1.001745329 ->exp:2-> val0[100]val1[174532900]
+ * 1.001745329 ->exp:4-> val0[10017]val1[453290000]
+ * 9.806650000 ->exp:-2-> val0[0]val1[98066500]
+ */
+static void adjust_exponent_nano(int *val0, int *val1, int scale0,
+				  int scale1, int exp)
+{
+	int divisor;
+	int i;
+	int x;
+	int res;
+	int rem;
+
+	if (exp > 0) {
+		*val0 = scale0 * int_pow(10, exp);
+		res = 0;
+		if (exp > 9) {
+			*val1 = 0;
+			return;
+		}
+		for (i = 0; i < exp; ++i) {
+			divisor = int_pow(10, 8 - i);
+			x = scale1 / divisor;
+			res += int_pow(10, exp - 1 - i) * x;
+			scale1 = scale1 % divisor;
+		}
+		*val0 += res;
+		*val1 = scale1 * int_pow(10, exp);
+	} else if (exp < 0) {
+		exp = abs(exp);
+		if (exp > 9) {
+			*val0 = *val1 = 0;
+			return;
+		}
+		divisor = int_pow(10, exp);
+		*val0 = scale0 / divisor;
+		rem = scale0 % divisor;
+		res = 0;
+		for (i = 0; i < (9 - exp); ++i) {
+			divisor = int_pow(10, 8 - i);
+			x = scale1 / divisor;
+			res += int_pow(10, 8 - exp - i) * x;
+			scale1 = scale1 % divisor;
+		}
+		*val1 = rem * int_pow(10, 9 - exp) + res;
+	} else {
+		*val0 = scale0;
+		*val1 = scale1;
+	}
+}
+
+int hid_sensor_format_scale(u32 usage_id,
+			struct hid_sensor_hub_attribute_info *attr_info,
+			int *val0, int *val1)
+{
+	int i;
+	int exp;
+
+	*val0 = 1;
+	*val1 = 0;
+
+	for (i = 0; i < ARRAY_SIZE(unit_conversion); ++i) {
+		if (unit_conversion[i].usage_id == usage_id &&
+			unit_conversion[i].unit == attr_info->units) {
+			exp  = hid_sensor_convert_exponent(
+						attr_info->unit_expo);
+			adjust_exponent_nano(val0, val1,
+					unit_conversion[i].scale_val0,
+					unit_conversion[i].scale_val1, exp);
+			break;
+		}
+	}
+
+	return IIO_VAL_INT_PLUS_NANO;
+}
+EXPORT_SYMBOL_NS(hid_sensor_format_scale, IIO_HID);
+
+int64_t hid_sensor_convert_timestamp(struct hid_sensor_common *st,
+				     int64_t raw_value)
+{
+	return st->timestamp_ns_scale * raw_value;
+}
+EXPORT_SYMBOL_NS(hid_sensor_convert_timestamp, IIO_HID);
+
+static
+int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device *hsdev,
+					u32 usage_id,
+					struct hid_sensor_common *st)
+{
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROP_REPORT_INTERVAL,
+					&st->poll);
+	/* Default unit of measure is milliseconds */
+	if (st->poll.units == 0)
+		st->poll.units = HID_USAGE_SENSOR_UNITS_MILLISECOND;
+
+	st->poll_interval = -1;
+
+	return 0;
+
+}
+
+static void hid_sensor_get_report_latency_info(struct hid_sensor_hub_device *hsdev,
+					       u32 usage_id,
+					       struct hid_sensor_common *st)
+{
+	sensor_hub_input_get_attribute_info(hsdev, HID_FEATURE_REPORT,
+					    usage_id,
+					    HID_USAGE_SENSOR_PROP_REPORT_LATENCY,
+					    &st->report_latency);
+
+	hid_dbg(hsdev->hdev, "Report latency attributes: %x:%x\n",
+		st->report_latency.index, st->report_latency.report_id);
+}
+
+int hid_sensor_get_report_latency(struct hid_sensor_common *st)
+{
+	int ret;
+	int value;
+
+	ret = sensor_hub_get_feature(st->hsdev, st->report_latency.report_id,
+				     st->report_latency.index, sizeof(value),
+				     &value);
+	if (ret < 0)
+		return ret;
+
+	return value;
+}
+EXPORT_SYMBOL_NS(hid_sensor_get_report_latency, IIO_HID_ATTRIBUTES);
+
+int hid_sensor_set_report_latency(struct hid_sensor_common *st, int latency_ms)
+{
+	return sensor_hub_set_feature(st->hsdev, st->report_latency.report_id,
+				      st->report_latency.index,
+				      sizeof(latency_ms), &latency_ms);
+}
+EXPORT_SYMBOL_NS(hid_sensor_set_report_latency, IIO_HID_ATTRIBUTES);
+
+bool hid_sensor_batch_mode_supported(struct hid_sensor_common *st)
+{
+	return st->report_latency.index > 0 && st->report_latency.report_id > 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_batch_mode_supported, IIO_HID_ATTRIBUTES);
+
+int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+					u32 usage_id,
+					struct hid_sensor_common *st,
+					const u32 *sensitivity_addresses,
+					u32 sensitivity_addresses_len)
+{
+
+	struct hid_sensor_hub_attribute_info timestamp;
+	s32 value;
+	int ret;
+	int i;
+
+	hid_sensor_get_reporting_interval(hsdev, usage_id, st);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROP_REPORT_STATE,
+					&st->report_state);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROY_POWER_STATE,
+					&st->power_state);
+
+	st->power_state.logical_minimum = 1;
+	st->report_state.logical_minimum = 1;
+
+	sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS,
+			 &st->sensitivity);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_PROP_SENSITIVITY_REL_PCT,
+			&st->sensitivity_rel);
+	/*
+	 * Set Sensitivity field ids, when there is no individual modifier, will
+	 * check absolute sensitivity and relative sensitivity of data field
+	 */
+	for (i = 0; i < sensitivity_addresses_len; i++) {
+		if (st->sensitivity.index < 0)
+			sensor_hub_input_get_attribute_info(
+				hsdev, HID_FEATURE_REPORT, usage_id,
+				HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+					sensitivity_addresses[i],
+				&st->sensitivity);
+
+		if (st->sensitivity_rel.index < 0)
+			sensor_hub_input_get_attribute_info(
+				hsdev, HID_FEATURE_REPORT, usage_id,
+				HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT |
+					sensitivity_addresses[i],
+				&st->sensitivity_rel);
+	}
+
+	st->raw_hystersis = -1;
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					    HID_INPUT_REPORT, usage_id,
+					    HID_USAGE_SENSOR_TIME_TIMESTAMP,
+					    &timestamp);
+	if (timestamp.index >= 0 && timestamp.report_id) {
+		int val0, val1;
+
+		hid_sensor_format_scale(HID_USAGE_SENSOR_TIME_TIMESTAMP,
+					&timestamp, &val0, &val1);
+		st->timestamp_ns_scale = val0;
+	} else
+		st->timestamp_ns_scale = 1000000000;
+
+	hid_sensor_get_report_latency_info(hsdev, usage_id, st);
+
+	hid_dbg(hsdev->hdev, "common attributes: %x:%x, %x:%x, %x:%x %x:%x %x:%x\n",
+		st->poll.index, st->poll.report_id,
+		st->report_state.index, st->report_state.report_id,
+		st->power_state.index, st->power_state.report_id,
+		st->sensitivity.index, st->sensitivity.report_id,
+		timestamp.index, timestamp.report_id);
+
+	ret = sensor_hub_get_feature(hsdev,
+				st->power_state.report_id,
+				st->power_state.index, sizeof(value), &value);
+	if (ret < 0)
+		return ret;
+	if (value < 0)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_parse_common_attributes, IIO_HID);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_DESCRIPTION("HID Sensor common attribute processing");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
new file mode 100644
index 000000000..ad8910e6a
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/workqueue.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/sysfs.h>
+#include "hid-sensor-trigger.h"
+
+static ssize_t _hid_sensor_set_report_latency(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	int integer, fract, ret;
+	int latency;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
+	if (ret)
+		return ret;
+
+	latency = integer * 1000 + fract / 1000;
+	ret = hid_sensor_set_report_latency(attrb, latency);
+	if (ret < 0)
+		return len;
+
+	attrb->latency_ms = hid_sensor_get_report_latency(attrb);
+
+	return len;
+}
+
+static ssize_t _hid_sensor_get_report_latency(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	int latency;
+
+	latency = hid_sensor_get_report_latency(attrb);
+	if (latency < 0)
+		return latency;
+
+	return sprintf(buf, "%d.%06u\n", latency / 1000, (latency % 1000) * 1000);
+}
+
+static ssize_t _hid_sensor_get_fifo_state(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	int latency;
+
+	latency = hid_sensor_get_report_latency(attrb);
+	if (latency < 0)
+		return latency;
+
+	return sprintf(buf, "%d\n", !!latency);
+}
+
+static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
+		       _hid_sensor_get_report_latency,
+		       _hid_sensor_set_report_latency, 0);
+static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
+		       _hid_sensor_get_fifo_state, NULL, 0);
+
+static const struct iio_dev_attr *hid_sensor_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_timeout,
+	&iio_dev_attr_hwfifo_enabled,
+	NULL,
+};
+
+static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
+{
+	int state_val;
+	int report_val;
+	s32 poll_value = 0;
+
+	if (state) {
+		if (sensor_hub_device_open(st->hsdev))
+			return -EIO;
+
+		atomic_inc(&st->data_ready);
+
+		state_val = hid_sensor_get_usage_index(st->hsdev,
+			st->power_state.report_id,
+			st->power_state.index,
+			HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM);
+		report_val = hid_sensor_get_usage_index(st->hsdev,
+			st->report_state.report_id,
+			st->report_state.index,
+			HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
+
+		poll_value = hid_sensor_read_poll_value(st);
+	} else {
+		int val;
+
+		val = atomic_dec_if_positive(&st->data_ready);
+		if (val < 0)
+			return 0;
+
+		sensor_hub_device_close(st->hsdev);
+		state_val = hid_sensor_get_usage_index(st->hsdev,
+			st->power_state.report_id,
+			st->power_state.index,
+			HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM);
+		report_val = hid_sensor_get_usage_index(st->hsdev,
+			st->report_state.report_id,
+			st->report_state.index,
+			HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM);
+	}
+
+	if (state_val >= 0) {
+		state_val += st->power_state.logical_minimum;
+		sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
+				       st->power_state.index, sizeof(state_val),
+				       &state_val);
+	}
+
+	if (report_val >= 0) {
+		report_val += st->report_state.logical_minimum;
+		sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
+				       st->report_state.index,
+				       sizeof(report_val),
+				       &report_val);
+	}
+
+	pr_debug("HID_SENSOR %s set power_state %d report_state %d\n",
+		 st->pdev->name, state_val, report_val);
+
+	sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
+			       st->power_state.index,
+			       sizeof(state_val), &state_val);
+	if (state && poll_value)
+		msleep_interruptible(poll_value * 2);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(hid_sensor_power_state, IIO_HID);
+
+int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
+{
+
+#ifdef CONFIG_PM
+	int ret;
+
+	if (atomic_add_unless(&st->runtime_pm_enable, 1, 1))
+		pm_runtime_enable(&st->pdev->dev);
+
+	if (state) {
+		atomic_inc(&st->user_requested_state);
+		ret = pm_runtime_resume_and_get(&st->pdev->dev);
+	} else {
+		atomic_dec(&st->user_requested_state);
+		pm_runtime_mark_last_busy(&st->pdev->dev);
+		pm_runtime_use_autosuspend(&st->pdev->dev);
+		ret = pm_runtime_put_autosuspend(&st->pdev->dev);
+	}
+	if (ret < 0)
+		return ret;
+
+	return 0;
+#else
+	atomic_set(&st->user_requested_state, state);
+	return _hid_sensor_power_state(st, state);
+#endif
+}
+
+static void hid_sensor_set_power_work(struct work_struct *work)
+{
+	struct hid_sensor_common *attrb = container_of(work,
+						       struct hid_sensor_common,
+						       work);
+
+	if (attrb->poll_interval >= 0)
+		sensor_hub_set_feature(attrb->hsdev, attrb->poll.report_id,
+				       attrb->poll.index,
+				       sizeof(attrb->poll_interval),
+				       &attrb->poll_interval);
+
+	if (attrb->raw_hystersis >= 0)
+		sensor_hub_set_feature(attrb->hsdev,
+				       attrb->sensitivity.report_id,
+				       attrb->sensitivity.index,
+				       sizeof(attrb->raw_hystersis),
+				       &attrb->raw_hystersis);
+
+	if (attrb->latency_ms > 0)
+		hid_sensor_set_report_latency(attrb, attrb->latency_ms);
+
+	if (atomic_read(&attrb->user_requested_state))
+		_hid_sensor_power_state(attrb, true);
+}
+
+static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
+						bool state)
+{
+	return hid_sensor_power_state(iio_trigger_get_drvdata(trig), state);
+}
+
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
+			       struct hid_sensor_common *attrb)
+{
+	if (atomic_read(&attrb->runtime_pm_enable))
+		pm_runtime_disable(&attrb->pdev->dev);
+
+	pm_runtime_set_suspended(&attrb->pdev->dev);
+
+	cancel_work_sync(&attrb->work);
+	iio_trigger_unregister(attrb->trigger);
+	iio_trigger_free(attrb->trigger);
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL_NS(hid_sensor_remove_trigger, IIO_HID);
+
+static const struct iio_trigger_ops hid_sensor_trigger_ops = {
+	.set_trigger_state = &hid_sensor_data_rdy_trigger_set_state,
+};
+
+int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
+				struct hid_sensor_common *attrb)
+{
+	const struct iio_dev_attr **fifo_attrs;
+	int ret;
+	struct iio_trigger *trig;
+
+	if (hid_sensor_batch_mode_supported(attrb))
+		fifo_attrs = hid_sensor_fifo_attributes;
+	else
+		fifo_attrs = NULL;
+
+	ret = iio_triggered_buffer_setup_ext(indio_dev,
+					     &iio_pollfunc_store_time, NULL,
+					     IIO_BUFFER_DIRECTION_IN,
+					     NULL, fifo_attrs);
+	if (ret) {
+		dev_err(&indio_dev->dev, "Triggered Buffer Setup Failed\n");
+		return ret;
+	}
+
+	trig = iio_trigger_alloc(indio_dev->dev.parent,
+				 "%s-dev%d", name, iio_device_id(indio_dev));
+	if (trig == NULL) {
+		dev_err(&indio_dev->dev, "Trigger Allocate Failed\n");
+		ret = -ENOMEM;
+		goto error_triggered_buffer_cleanup;
+	}
+
+	iio_trigger_set_drvdata(trig, attrb);
+	trig->ops = &hid_sensor_trigger_ops;
+	ret = iio_trigger_register(trig);
+
+	if (ret) {
+		dev_err(&indio_dev->dev, "Trigger Register Failed\n");
+		goto error_free_trig;
+	}
+	attrb->trigger = trig;
+	indio_dev->trig = iio_trigger_get(trig);
+
+	ret = pm_runtime_set_active(&indio_dev->dev);
+	if (ret)
+		goto error_unreg_trigger;
+
+	iio_device_set_drvdata(indio_dev, attrb);
+
+	INIT_WORK(&attrb->work, hid_sensor_set_power_work);
+
+	pm_suspend_ignore_children(&attrb->pdev->dev, true);
+	/* Default to 3 seconds, but can be changed from sysfs */
+	pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
+					 3000);
+	return ret;
+error_unreg_trigger:
+	iio_trigger_unregister(trig);
+error_free_trig:
+	iio_trigger_free(trig);
+error_triggered_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+EXPORT_SYMBOL_NS(hid_sensor_setup_trigger, IIO_HID);
+
+static int __maybe_unused hid_sensor_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+
+	return _hid_sensor_power_state(attrb, false);
+}
+
+static int __maybe_unused hid_sensor_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	schedule_work(&attrb->work);
+	return 0;
+}
+
+static int __maybe_unused hid_sensor_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	return _hid_sensor_power_state(attrb, true);
+}
+
+const struct dev_pm_ops hid_sensor_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(hid_sensor_suspend, hid_sensor_resume)
+	SET_RUNTIME_PM_OPS(hid_sensor_suspend,
+			   hid_sensor_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_NS(hid_sensor_pm_ops, IIO_HID);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_DESCRIPTION("HID Sensor trigger processing");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_HID_ATTRIBUTES);
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
new file mode 100644
index 000000000..f94fca4f1
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ */
+#ifndef _HID_SENSOR_TRIGGER_H
+#define _HID_SENSOR_TRIGGER_H
+
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+struct hid_sensor_common;
+struct iio_dev;
+
+extern const struct dev_pm_ops hid_sensor_pm_ops;
+
+int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
+				struct hid_sensor_common *attrb);
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
+			       struct hid_sensor_common *attrb);
+int hid_sensor_power_state(struct hid_sensor_common *st, bool state);
+
+#endif
diff --git a/drivers/iio/common/inv_sensors/Kconfig b/drivers/iio/common/inv_sensors/Kconfig
new file mode 100644
index 000000000..28815fb43
--- /dev/null
+++ b/drivers/iio/common/inv_sensors/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# TDK-InvenSense sensors common library
+#
+
+config IIO_INV_SENSORS_TIMESTAMP
+	tristate
diff --git a/drivers/iio/common/inv_sensors/Makefile b/drivers/iio/common/inv_sensors/Makefile
new file mode 100644
index 000000000..dcf39f249
--- /dev/null
+++ b/drivers/iio/common/inv_sensors/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for TDK-InvenSense sensors module.
+#
+
+obj-$(CONFIG_IIO_INV_SENSORS_TIMESTAMP) += inv_sensors_timestamp.o
diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
new file mode 100644
index 000000000..03823ee57
--- /dev/null
+++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+
+/* compute jitter, min and max following jitter in per mille */
+#define INV_SENSORS_TIMESTAMP_JITTER(_val, _jitter)		\
+	(div_s64((_val) * (_jitter), 1000))
+#define INV_SENSORS_TIMESTAMP_MIN(_val, _jitter)		\
+	(((_val) * (1000 - (_jitter))) / 1000)
+#define INV_SENSORS_TIMESTAMP_MAX(_val, _jitter)		\
+	(((_val) * (1000 + (_jitter))) / 1000)
+
+/* Add a new value inside an accumulator and update the estimate value */
+static void inv_update_acc(struct inv_sensors_timestamp_acc *acc, uint32_t val)
+{
+	uint64_t sum = 0;
+	size_t i;
+
+	acc->values[acc->idx++] = val;
+	if (acc->idx >= ARRAY_SIZE(acc->values))
+		acc->idx = 0;
+
+	/* compute the mean of all stored values, use 0 as empty slot */
+	for (i = 0; i < ARRAY_SIZE(acc->values); ++i) {
+		if (acc->values[i] == 0)
+			break;
+		sum += acc->values[i];
+	}
+
+	acc->val = div_u64(sum, i);
+}
+
+void inv_sensors_timestamp_init(struct inv_sensors_timestamp *ts,
+				const struct inv_sensors_timestamp_chip *chip)
+{
+	memset(ts, 0, sizeof(*ts));
+
+	/* save chip parameters and compute min and max clock period */
+	ts->chip = *chip;
+	ts->min_period = INV_SENSORS_TIMESTAMP_MIN(chip->clock_period, chip->jitter);
+	ts->max_period = INV_SENSORS_TIMESTAMP_MAX(chip->clock_period, chip->jitter);
+
+	/* current multiplier and period values after reset */
+	ts->mult = chip->init_period / chip->clock_period;
+	ts->period = chip->init_period;
+
+	/* use theoretical value for chip period */
+	inv_update_acc(&ts->chip_period, chip->clock_period);
+}
+EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_init, IIO_INV_SENSORS_TIMESTAMP);
+
+int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts,
+				     uint32_t period, bool fifo)
+{
+	/* when FIFO is on, prevent odr change if one is already pending */
+	if (fifo && ts->new_mult != 0)
+		return -EAGAIN;
+
+	ts->new_mult = period / ts->chip.clock_period;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_update_odr, IIO_INV_SENSORS_TIMESTAMP);
+
+static bool inv_validate_period(struct inv_sensors_timestamp *ts, uint32_t period, uint32_t mult)
+{
+	uint32_t period_min, period_max;
+
+	/* check that period is acceptable */
+	period_min = ts->min_period * mult;
+	period_max = ts->max_period * mult;
+	if (period > period_min && period < period_max)
+		return true;
+	else
+		return false;
+}
+
+static bool inv_update_chip_period(struct inv_sensors_timestamp *ts,
+				    uint32_t mult, uint32_t period)
+{
+	uint32_t new_chip_period;
+
+	if (!inv_validate_period(ts, period, mult))
+		return false;
+
+	/* update chip internal period estimation */
+	new_chip_period = period / mult;
+	inv_update_acc(&ts->chip_period, new_chip_period);
+	ts->period = ts->mult * ts->chip_period.val;
+
+	return true;
+}
+
+static void inv_align_timestamp_it(struct inv_sensors_timestamp *ts)
+{
+	int64_t delta, jitter;
+	int64_t adjust;
+
+	/* delta time between last sample and last interrupt */
+	delta = ts->it.lo - ts->timestamp;
+
+	/* adjust timestamp while respecting jitter */
+	jitter = INV_SENSORS_TIMESTAMP_JITTER((int64_t)ts->period, ts->chip.jitter);
+	if (delta > jitter)
+		adjust = jitter;
+	else if (delta < -jitter)
+		adjust = -jitter;
+	else
+		adjust = 0;
+
+	ts->timestamp += adjust;
+}
+
+void inv_sensors_timestamp_interrupt(struct inv_sensors_timestamp *ts,
+				      uint32_t fifo_period, size_t fifo_nb,
+				      size_t sensor_nb, int64_t timestamp)
+{
+	struct inv_sensors_timestamp_interval *it;
+	int64_t delta, interval;
+	const uint32_t fifo_mult = fifo_period / ts->chip.clock_period;
+	uint32_t period = ts->period;
+	bool valid = false;
+
+	if (fifo_nb == 0)
+		return;
+
+	/* update interrupt timestamp and compute chip and sensor periods */
+	it = &ts->it;
+	it->lo = it->up;
+	it->up = timestamp;
+	delta = it->up - it->lo;
+	if (it->lo != 0) {
+		/* compute period: delta time divided by number of samples */
+		period = div_s64(delta, fifo_nb);
+		valid = inv_update_chip_period(ts, fifo_mult, period);
+	}
+
+	/* no previous data, compute theoritical value from interrupt */
+	if (ts->timestamp == 0) {
+		/* elapsed time: sensor period * sensor samples number */
+		interval = (int64_t)ts->period * (int64_t)sensor_nb;
+		ts->timestamp = it->up - interval;
+		return;
+	}
+
+	/* if interrupt interval is valid, sync with interrupt timestamp */
+	if (valid)
+		inv_align_timestamp_it(ts);
+}
+EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_interrupt, IIO_INV_SENSORS_TIMESTAMP);
+
+void inv_sensors_timestamp_apply_odr(struct inv_sensors_timestamp *ts,
+				     uint32_t fifo_period, size_t fifo_nb,
+				     unsigned int fifo_no)
+{
+	int64_t interval;
+	uint32_t fifo_mult;
+
+	if (ts->new_mult == 0)
+		return;
+
+	/* update to new multiplier and update period */
+	ts->mult = ts->new_mult;
+	ts->new_mult = 0;
+	ts->period = ts->mult * ts->chip_period.val;
+
+	/*
+	 * After ODR change the time interval with the previous sample is
+	 * undertermined (depends when the change occures). So we compute the
+	 * timestamp from the current interrupt using the new FIFO period, the
+	 * total number of samples and the current sample numero.
+	 */
+	if (ts->timestamp != 0) {
+		/* compute measured fifo period */
+		fifo_mult = fifo_period / ts->chip.clock_period;
+		fifo_period = fifo_mult * ts->chip_period.val;
+		/* computes time interval between interrupt and this sample */
+		interval = (int64_t)(fifo_nb - fifo_no) * (int64_t)fifo_period;
+		ts->timestamp = ts->it.up - interval;
+	}
+}
+EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_apply_odr, IIO_INV_SENSORS_TIMESTAMP);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense sensors timestamp module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/ms_sensors/Kconfig b/drivers/iio/common/ms_sensors/Kconfig
new file mode 100644
index 000000000..45012b7ad
--- /dev/null
+++ b/drivers/iio/common/ms_sensors/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Measurements Specialties sensors common library
+#
+
+config IIO_MS_SENSORS_I2C
+	tristate
diff --git a/drivers/iio/common/ms_sensors/Makefile b/drivers/iio/common/ms_sensors/Makefile
new file mode 100644
index 000000000..028573b9b
--- /dev/null
+++ b/drivers/iio/common/ms_sensors/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Measurement Specialties sensor common modules.
+#
+
+obj-$(CONFIG_IIO_MS_SENSORS_I2C) += ms_sensors_i2c.o
diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
new file mode 100644
index 000000000..9c9bc7700
--- /dev/null
+++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
@@ -0,0 +1,697 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Measurements Specialties driver common i2c functions
+ *
+ * Copyright (c) 2015 Measurement-Specialties
+ */
+
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include "ms_sensors_i2c.h"
+
+/* Conversion times in us */
+static const u16 ms_sensors_ht_t_conversion_time[] = { 50000, 25000,
+						       13000, 7000 };
+static const u16 ms_sensors_ht_h_conversion_time[] = { 16000, 5000,
+						       3000, 8000 };
+static const u16 ms_sensors_tp_conversion_time[] = { 500, 1100, 2100,
+						     4100, 8220, 16440 };
+
+#define MS_SENSORS_SERIAL_READ_MSB		0xFA0F
+#define MS_SENSORS_SERIAL_READ_LSB		0xFCC9
+#define MS_SENSORS_CONFIG_REG_WRITE		0xE6
+#define MS_SENSORS_CONFIG_REG_READ		0xE7
+#define MS_SENSORS_HT_T_CONVERSION_START	0xF3
+#define MS_SENSORS_HT_H_CONVERSION_START	0xF5
+
+#define MS_SENSORS_TP_PROM_READ			0xA0
+#define MS_SENSORS_TP_T_CONVERSION_START	0x50
+#define MS_SENSORS_TP_P_CONVERSION_START	0x40
+#define MS_SENSORS_TP_ADC_READ			0x00
+
+#define MS_SENSORS_NO_READ_CMD			0xFF
+
+/**
+ * ms_sensors_reset() - Reset function
+ * @cli:	pointer to device client
+ * @cmd:	reset cmd. Depends on device in use
+ * @delay:	usleep minimal delay after reset command is issued
+ *
+ * Generic I2C reset function for Measurement Specialties devices.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_reset(void *cli, u8 cmd, unsigned int delay)
+{
+	int ret;
+	struct i2c_client *client = cli;
+
+	ret = i2c_smbus_write_byte(client, cmd);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset device\n");
+		return ret;
+	}
+	usleep_range(delay, delay + 1000);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_reset, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_read_prom_word() - PROM word read function
+ * @cli:	pointer to device client
+ * @cmd:	PROM read cmd. Depends on device and prom id
+ * @word:	pointer to word destination value
+ *
+ * Generic i2c prom word read function for Measurement Specialties devices.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_read_prom_word(void *cli, int cmd, u16 *word)
+{
+	int ret;
+	struct i2c_client *client = cli;
+
+	ret = i2c_smbus_read_word_swapped(client, cmd);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read prom word\n");
+		return ret;
+	}
+	*word = ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_read_prom_word, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_convert_and_read() - ADC conversion & read function
+ * @cli:	pointer to device client
+ * @conv:	ADC conversion command. Depends on device in use
+ * @rd:		ADC read command. Depends on device in use
+ * @delay:	usleep minimal delay after conversion command is issued
+ * @adc:	pointer to ADC destination value
+ *
+ * Generic ADC conversion & read function for Measurement Specialties
+ * devices.
+ * The function will issue conversion command, sleep appopriate delay, and
+ * issue command to read ADC.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_convert_and_read(void *cli, u8 conv, u8 rd,
+				unsigned int delay, u32 *adc)
+{
+	int ret;
+	__be32 buf = 0;
+	struct i2c_client *client = cli;
+
+	/* Trigger conversion */
+	ret = i2c_smbus_write_byte(client, conv);
+	if (ret)
+		goto err;
+	usleep_range(delay, delay + 1000);
+
+	/* Retrieve ADC value */
+	if (rd != MS_SENSORS_NO_READ_CMD)
+		ret = i2c_smbus_read_i2c_block_data(client, rd, 3, (u8 *)&buf);
+	else
+		ret = i2c_master_recv(client, (u8 *)&buf, 3);
+	if (ret < 0)
+		goto err;
+
+	dev_dbg(&client->dev, "ADC raw value : %x\n", be32_to_cpu(buf) >> 8);
+	*adc = be32_to_cpu(buf) >> 8;
+
+	return 0;
+err:
+	dev_err(&client->dev, "Unable to make sensor adc conversion\n");
+	return ret;
+}
+EXPORT_SYMBOL_NS(ms_sensors_convert_and_read, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_crc_valid() - CRC check function
+ * @value:	input and CRC compare value
+ *
+ * Cyclic Redundancy Check function used in TSYS02D, HTU21, MS8607.
+ * This function performs a x^8 + x^5 + x^4 + 1 polynomial CRC.
+ * The argument contains CRC value in LSB byte while the bytes 1 and 2
+ * are used for CRC computation.
+ *
+ * Return: 1 if CRC is valid, 0 otherwise.
+ */
+static bool ms_sensors_crc_valid(u32 value)
+{
+	u32 polynom = 0x988000;	/* x^8 + x^5 + x^4 + 1 */
+	u32 msb = 0x800000;
+	u32 mask = 0xFF8000;
+	u32 result = value & 0xFFFF00;
+	u8 crc = value & 0xFF;
+
+	while (msb != 0x80) {
+		if (result & msb)
+			result = ((result ^ polynom) & mask)
+				| (result & ~mask);
+		msb >>= 1;
+		mask >>= 1;
+		polynom >>= 1;
+	}
+
+	return result == crc;
+}
+
+/**
+ * ms_sensors_read_serial() - Serial number read function
+ * @client:	pointer to i2c client
+ * @sn:		pointer to 64-bits destination value
+ *
+ * Generic i2c serial number read function for Measurement Specialties devices.
+ * This function is used for TSYS02d, HTU21, MS8607 chipset.
+ * Refer to datasheet:
+ *	http://www.meas-spec.com/downloads/HTU2X_Serial_Number_Reading.pdf
+ *
+ * Sensor raw MSB serial number format is the following :
+ *	[ SNB3, CRC, SNB2, CRC, SNB1, CRC, SNB0, CRC]
+ * Sensor raw LSB serial number format is the following :
+ *	[ X, X, SNC1, SNC0, CRC, SNA1, SNA0, CRC]
+ * The resulting serial number is following :
+ *	[ SNA1, SNA0, SNB3, SNB2, SNB1, SNB0, SNC1, SNC0]
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_read_serial(struct i2c_client *client, u64 *sn)
+{
+	u8 i;
+	__be64 rcv_buf = 0;
+	u64 rcv_val;
+	__be16 send_buf;
+	int ret;
+
+	struct i2c_msg msg[2] = {
+		{
+		 .addr = client->addr,
+		 .flags = client->flags,
+		 .len = 2,
+		 .buf = (__u8 *)&send_buf,
+		 },
+		{
+		 .addr = client->addr,
+		 .flags = client->flags | I2C_M_RD,
+		 .buf = (__u8 *)&rcv_buf,
+		 },
+	};
+
+	/* Read MSB part of serial number */
+	send_buf = cpu_to_be16(MS_SENSORS_SERIAL_READ_MSB);
+	msg[1].len = 8;
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to read device serial number");
+		return ret;
+	}
+
+	rcv_val = be64_to_cpu(rcv_buf);
+	dev_dbg(&client->dev, "Serial MSB raw : %llx\n", rcv_val);
+
+	for (i = 0; i < 64; i += 16) {
+		if (!ms_sensors_crc_valid((rcv_val >> i) & 0xFFFF))
+			return -ENODEV;
+	}
+
+	*sn = (((rcv_val >> 32) & 0xFF000000) |
+	       ((rcv_val >> 24) & 0x00FF0000) |
+	       ((rcv_val >> 16) & 0x0000FF00) |
+	       ((rcv_val >> 8) & 0x000000FF)) << 16;
+
+	/* Read LSB part of serial number */
+	send_buf = cpu_to_be16(MS_SENSORS_SERIAL_READ_LSB);
+	msg[1].len = 6;
+	rcv_buf = 0;
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to read device serial number");
+		return ret;
+	}
+
+	rcv_val = be64_to_cpu(rcv_buf) >> 16;
+	dev_dbg(&client->dev, "Serial MSB raw : %llx\n", rcv_val);
+
+	for (i = 0; i < 48; i += 24) {
+		if (!ms_sensors_crc_valid((rcv_val >> i) & 0xFFFFFF))
+			return -ENODEV;
+	}
+
+	*sn |= (rcv_val & 0xFFFF00) << 40 | (rcv_val >> 32);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_read_serial, IIO_MEAS_SPEC_SENSORS);
+
+static int ms_sensors_read_config_reg(struct i2c_client *client,
+				      u8 *config_reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte(client, MS_SENSORS_CONFIG_REG_READ);
+	if (ret) {
+		dev_err(&client->dev, "Unable to read config register");
+		return ret;
+	}
+
+	ret = i2c_master_recv(client, config_reg, 1);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to read config register");
+		return ret;
+	}
+	dev_dbg(&client->dev, "Config register :%x\n", *config_reg);
+
+	return 0;
+}
+
+/**
+ * ms_sensors_write_resolution() - Set resolution function
+ * @dev_data:	pointer to temperature/humidity device data
+ * @i:		resolution index to set
+ *
+ * This function will program the appropriate resolution based on the index
+ * provided when user space will set samp_freq channel.
+ * This function is used for TSYS02D, HTU21 and MS8607 chipsets.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+ssize_t ms_sensors_write_resolution(struct ms_ht_dev *dev_data,
+				    u8 i)
+{
+	u8 config_reg;
+	int ret;
+
+	ret = ms_sensors_read_config_reg(dev_data->client, &config_reg);
+	if (ret)
+		return ret;
+
+	config_reg &= 0x7E;
+	config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
+
+	return i2c_smbus_write_byte_data(dev_data->client,
+					 MS_SENSORS_CONFIG_REG_WRITE,
+					 config_reg);
+}
+EXPORT_SYMBOL_NS(ms_sensors_write_resolution, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_show_battery_low() - Show device battery low indicator
+ * @dev_data:	pointer to temperature/humidity device data
+ * @buf:	pointer to char buffer to write result
+ *
+ * This function will read battery indicator value in the device and
+ * return 1 if the device voltage is below 2.25V.
+ * This function is used for TSYS02D, HTU21 and MS8607 chipsets.
+ *
+ * Return: length of sprintf on success, negative errno otherwise.
+ */
+ssize_t ms_sensors_show_battery_low(struct ms_ht_dev *dev_data,
+				    char *buf)
+{
+	int ret;
+	u8 config_reg;
+
+	mutex_lock(&dev_data->lock);
+	ret = ms_sensors_read_config_reg(dev_data->client, &config_reg);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", (config_reg & 0x40) >> 6);
+}
+EXPORT_SYMBOL_NS(ms_sensors_show_battery_low, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_show_heater() - Show device heater
+ * @dev_data:	pointer to temperature/humidity device data
+ * @buf:	pointer to char buffer to write result
+ *
+ * This function will read heater enable value in the device and
+ * return 1 if the heater is enabled.
+ * This function is used for HTU21 and MS8607 chipsets.
+ *
+ * Return: length of sprintf on success, negative errno otherwise.
+ */
+ssize_t ms_sensors_show_heater(struct ms_ht_dev *dev_data,
+			       char *buf)
+{
+	u8 config_reg;
+	int ret;
+
+	mutex_lock(&dev_data->lock);
+	ret = ms_sensors_read_config_reg(dev_data->client, &config_reg);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", (config_reg & 0x4) >> 2);
+}
+EXPORT_SYMBOL_NS(ms_sensors_show_heater, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_write_heater() - Write device heater
+ * @dev_data:	pointer to temperature/humidity device data
+ * @buf:	pointer to char buffer from user space
+ * @len:	length of buf
+ *
+ * This function will write 1 or 0 value in the device
+ * to enable or disable heater.
+ * This function is used for HTU21 and MS8607 chipsets.
+ *
+ * Return: length of buffer, negative errno otherwise.
+ */
+ssize_t ms_sensors_write_heater(struct ms_ht_dev *dev_data,
+				const char *buf, size_t len)
+{
+	u8 val, config_reg;
+	int ret;
+
+	ret = kstrtou8(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 1)
+		return -EINVAL;
+
+	mutex_lock(&dev_data->lock);
+	ret = ms_sensors_read_config_reg(dev_data->client, &config_reg);
+	if (ret) {
+		mutex_unlock(&dev_data->lock);
+		return ret;
+	}
+
+	config_reg &= 0xFB;
+	config_reg |= val << 2;
+
+	ret = i2c_smbus_write_byte_data(dev_data->client,
+					MS_SENSORS_CONFIG_REG_WRITE,
+					config_reg);
+	mutex_unlock(&dev_data->lock);
+	if (ret) {
+		dev_err(&dev_data->client->dev, "Unable to write config register\n");
+		return ret;
+	}
+
+	return len;
+}
+EXPORT_SYMBOL_NS(ms_sensors_write_heater, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_ht_read_temperature() - Read temperature
+ * @dev_data:	pointer to temperature/humidity device data
+ * @temperature:pointer to temperature destination value
+ *
+ * This function will get temperature ADC value from the device,
+ * check the CRC and compute the temperature value.
+ * This function is used for TSYS02D, HTU21 and MS8607 chipsets.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_ht_read_temperature(struct ms_ht_dev *dev_data,
+				   s32 *temperature)
+{
+	int ret;
+	u32 adc;
+	u16 delay;
+
+	mutex_lock(&dev_data->lock);
+	delay = ms_sensors_ht_t_conversion_time[dev_data->res_index];
+	ret = ms_sensors_convert_and_read(dev_data->client,
+					  MS_SENSORS_HT_T_CONVERSION_START,
+					  MS_SENSORS_NO_READ_CMD,
+					  delay, &adc);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	if (!ms_sensors_crc_valid(adc)) {
+		dev_err(&dev_data->client->dev,
+			"Temperature read crc check error\n");
+		return -ENODEV;
+	}
+
+	/* Temperature algorithm */
+	*temperature = (((s64)(adc >> 8) * 175720) >> 16) - 46850;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_ht_read_temperature, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_ht_read_humidity() - Read humidity
+ * @dev_data:	pointer to temperature/humidity device data
+ * @humidity:	pointer to humidity destination value
+ *
+ * This function will get humidity ADC value from the device,
+ * check the CRC and compute the temperature value.
+ * This function is used for HTU21 and MS8607 chipsets.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_ht_read_humidity(struct ms_ht_dev *dev_data,
+				u32 *humidity)
+{
+	int ret;
+	u32 adc;
+	u16 delay;
+
+	mutex_lock(&dev_data->lock);
+	delay = ms_sensors_ht_h_conversion_time[dev_data->res_index];
+	ret = ms_sensors_convert_and_read(dev_data->client,
+					  MS_SENSORS_HT_H_CONVERSION_START,
+					  MS_SENSORS_NO_READ_CMD,
+					  delay, &adc);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	if (!ms_sensors_crc_valid(adc)) {
+		dev_err(&dev_data->client->dev,
+			"Humidity read crc check error\n");
+		return -ENODEV;
+	}
+
+	/* Humidity algorithm */
+	*humidity = (((s32)(adc >> 8) * 12500) >> 16) * 10 - 6000;
+	if (*humidity >= 100000)
+		*humidity = 100000;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_ht_read_humidity, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_tp_crc4() - Calculate PROM CRC for
+ *     Temperature and pressure devices.
+ *     This function is only used when reading PROM coefficients
+ *
+ * @prom:	pointer to PROM coefficients array
+ *
+ * Return: CRC.
+ */
+static u8 ms_sensors_tp_crc4(u16 *prom)
+{
+	unsigned int cnt, n_bit;
+	u16 n_rem = 0x0000;
+
+	for (cnt = 0; cnt < MS_SENSORS_TP_PROM_WORDS_NB * 2; cnt++) {
+		if (cnt % 2 == 1)
+			n_rem ^= prom[cnt >> 1] & 0x00FF;
+		else
+			n_rem ^= prom[cnt >> 1] >> 8;
+
+		for (n_bit = 8; n_bit > 0; n_bit--) {
+			if (n_rem & 0x8000)
+				n_rem = (n_rem << 1) ^ 0x3000;
+			else
+				n_rem <<= 1;
+		}
+	}
+
+	return n_rem >> 12;
+}
+
+/**
+ * ms_sensors_tp_crc_valid_112() - CRC check function for
+ *     Temperature and pressure devices for 112bit PROM.
+ *     This function is only used when reading PROM coefficients
+ *
+ * @prom:	pointer to PROM coefficients array
+ *
+ * Return: True if CRC is ok.
+ */
+static bool ms_sensors_tp_crc_valid_112(u16 *prom)
+{
+	u16 w0 = prom[0], crc_read = (w0 & 0xF000) >> 12;
+	u8 crc;
+
+	prom[0] &= 0x0FFF;      /* Clear the CRC computation part */
+	prom[MS_SENSORS_TP_PROM_WORDS_NB - 1] = 0;
+
+	crc = ms_sensors_tp_crc4(prom);
+
+	prom[0] = w0;
+
+	return crc == crc_read;
+}
+
+/**
+ * ms_sensors_tp_crc_valid_128() - CRC check function for
+ *     Temperature and pressure devices for 128bit PROM.
+ *     This function is only used when reading PROM coefficients
+ *
+ * @prom:	pointer to PROM coefficients array
+ *
+ * Return: True if CRC is ok.
+ */
+static bool ms_sensors_tp_crc_valid_128(u16 *prom)
+{
+	u16 w7 = prom[7], crc_read = w7 & 0x000F;
+	u8 crc;
+
+	prom[7] &= 0xFF00;      /* Clear the CRC and LSB part */
+
+	crc = ms_sensors_tp_crc4(prom);
+
+	prom[7] = w7;
+
+	return crc == crc_read;
+}
+
+/**
+ * ms_sensors_tp_read_prom() - prom coeff read function
+ * @dev_data:	pointer to temperature/pressure device data
+ *
+ * This function will read prom coefficients and check CRC.
+ * This function is used for MS5637 and MS8607 chipsets.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_tp_read_prom(struct ms_tp_dev *dev_data)
+{
+	int i, ret;
+	bool valid;
+
+	for (i = 0; i < dev_data->hw->prom_len; i++) {
+		ret = ms_sensors_read_prom_word(
+			dev_data->client,
+			MS_SENSORS_TP_PROM_READ + (i << 1),
+			&dev_data->prom[i]);
+
+		if (ret)
+			return ret;
+	}
+
+	if (dev_data->hw->prom_len == 8)
+		valid = ms_sensors_tp_crc_valid_128(dev_data->prom);
+	else
+		valid = ms_sensors_tp_crc_valid_112(dev_data->prom);
+
+	if (!valid) {
+		dev_err(&dev_data->client->dev,
+			"Calibration coefficients crc check error\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_tp_read_prom, IIO_MEAS_SPEC_SENSORS);
+
+/**
+ * ms_sensors_read_temp_and_pressure() - read temp and pressure
+ * @dev_data:	pointer to temperature/pressure device data
+ * @temperature:pointer to temperature destination value
+ * @pressure:	pointer to pressure destination value
+ *
+ * This function will read ADC and compute pressure and temperature value.
+ * This function is used for MS5637 and MS8607 chipsets.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+int ms_sensors_read_temp_and_pressure(struct ms_tp_dev *dev_data,
+				      int *temperature,
+				      unsigned int *pressure)
+{
+	int ret;
+	u32 t_adc, p_adc;
+	s32 dt, temp;
+	s64 off, sens, t2, off2, sens2;
+	u16 *prom = dev_data->prom, delay;
+
+	mutex_lock(&dev_data->lock);
+	delay = ms_sensors_tp_conversion_time[dev_data->res_index];
+
+	ret = ms_sensors_convert_and_read(
+					dev_data->client,
+					MS_SENSORS_TP_T_CONVERSION_START +
+						dev_data->res_index * 2,
+					MS_SENSORS_TP_ADC_READ,
+					delay, &t_adc);
+	if (ret) {
+		mutex_unlock(&dev_data->lock);
+		return ret;
+	}
+
+	ret = ms_sensors_convert_and_read(
+					dev_data->client,
+					MS_SENSORS_TP_P_CONVERSION_START +
+						dev_data->res_index * 2,
+					MS_SENSORS_TP_ADC_READ,
+					delay, &p_adc);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	dt = (s32)t_adc - (prom[5] << 8);
+
+	/* Actual temperature = 2000 + dT * TEMPSENS */
+	temp = 2000 + (((s64)dt * prom[6]) >> 23);
+
+	/* Second order temperature compensation */
+	if (temp < 2000) {
+		s64 tmp = (s64)temp - 2000;
+
+		t2 = (3 * ((s64)dt * (s64)dt)) >> 33;
+		off2 = (61 * tmp * tmp) >> 4;
+		sens2 = (29 * tmp * tmp) >> 4;
+
+		if (temp < -1500) {
+			s64 tmp = (s64)temp + 1500;
+
+			off2 += 17 * tmp * tmp;
+			sens2 += 9 * tmp * tmp;
+		}
+	} else {
+		t2 = (5 * ((s64)dt * (s64)dt)) >> 38;
+		off2 = 0;
+		sens2 = 0;
+	}
+
+	/* OFF = OFF_T1 + TCO * dT */
+	off = (((s64)prom[2]) << 17) + ((((s64)prom[4]) * (s64)dt) >> 6);
+	off -= off2;
+
+	/* Sensitivity at actual temperature = SENS_T1 + TCS * dT */
+	sens = (((s64)prom[1]) << 16) + (((s64)prom[3] * dt) >> 7);
+	sens -= sens2;
+
+	/* Temperature compensated pressure = D1 * SENS - OFF */
+	*temperature = (temp - t2) * 10;
+	*pressure = (u32)(((((s64)p_adc * sens) >> 21) - off) >> 15);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ms_sensors_read_temp_and_pressure, IIO_MEAS_SPEC_SENSORS);
+
+MODULE_DESCRIPTION("Measurement-Specialties common i2c driver");
+MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
+MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.h b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h
new file mode 100644
index 000000000..f15b973f2
--- /dev/null
+++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Measurements Specialties common sensor driver
+ *
+ * Copyright (c) 2015 Measurement-Specialties
+ */
+
+#ifndef _MS_SENSORS_I2C_H
+#define _MS_SENSORS_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#define MS_SENSORS_TP_PROM_WORDS_NB		8
+
+/**
+ * struct ms_ht_dev - Humidity/Temperature sensor device structure
+ * @client:	i2c client
+ * @lock:	lock protecting the i2c conversion
+ * @res_index:	index to selected sensor resolution
+ */
+struct ms_ht_dev {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 res_index;
+};
+
+/**
+ * struct ms_hw_data - Temperature/Pressure sensor hardware data
+ * @prom_len:		number of words in the PROM
+ * @max_res_index:	maximum sensor resolution index
+ */
+struct ms_tp_hw_data {
+	u8 prom_len;
+	u8 max_res_index;
+};
+
+/**
+ * struct ms_tp_dev - Temperature/Pressure sensor device structure
+ * @client:	i2c client
+ * @lock:	lock protecting the i2c conversion
+ * @prom:	array of PROM coefficients used for conversion. Added element
+ *              for CRC computation
+ * @res_index:	index to selected sensor resolution
+ */
+struct ms_tp_dev {
+	struct i2c_client *client;
+	struct mutex lock;
+	const struct ms_tp_hw_data *hw;
+	u16 prom[MS_SENSORS_TP_PROM_WORDS_NB];
+	u8 res_index;
+};
+
+int ms_sensors_reset(void *cli, u8 cmd, unsigned int delay);
+int ms_sensors_read_prom_word(void *cli, int cmd, u16 *word);
+int ms_sensors_convert_and_read(void *cli, u8 conv, u8 rd,
+				unsigned int delay, u32 *adc);
+int ms_sensors_read_serial(struct i2c_client *client, u64 *sn);
+ssize_t ms_sensors_show_serial(struct ms_ht_dev *dev_data, char *buf);
+ssize_t ms_sensors_write_resolution(struct ms_ht_dev *dev_data, u8 i);
+ssize_t ms_sensors_show_battery_low(struct ms_ht_dev *dev_data, char *buf);
+ssize_t ms_sensors_show_heater(struct ms_ht_dev *dev_data, char *buf);
+ssize_t ms_sensors_write_heater(struct ms_ht_dev *dev_data,
+				const char *buf, size_t len);
+int ms_sensors_ht_read_temperature(struct ms_ht_dev *dev_data,
+				   s32 *temperature);
+int ms_sensors_ht_read_humidity(struct ms_ht_dev *dev_data,
+				u32 *humidity);
+int ms_sensors_tp_read_prom(struct ms_tp_dev *dev_data);
+int ms_sensors_read_temp_and_pressure(struct ms_tp_dev *dev_data,
+				      int *temperature,
+				      unsigned int *pressure);
+
+#endif /* _MS_SENSORS_I2C_H */
diff --git a/drivers/iio/common/scmi_sensors/Kconfig b/drivers/iio/common/scmi_sensors/Kconfig
new file mode 100644
index 000000000..67e084cbb
--- /dev/null
+++ b/drivers/iio/common/scmi_sensors/Kconfig
@@ -0,0 +1,18 @@
+#
+# IIO over SCMI
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "IIO SCMI Sensors"
+
+config IIO_SCMI
+	tristate "IIO SCMI"
+        depends on ARM_SCMI_PROTOCOL
+        select IIO_BUFFER
+        select IIO_KFIFO_BUF
+	help
+          Say yes here to build support for IIO SCMI Driver.
+          This provides ARM SCMI Protocol based IIO device.
+          This driver provides support for accelerometer and gyroscope
+          sensors available on SCMI based platforms.
+endmenu
diff --git a/drivers/iio/common/scmi_sensors/Makefile b/drivers/iio/common/scmi_sensors/Makefile
new file mode 100644
index 000000000..645e0fce1
--- /dev/null
+++ b/drivers/iio/common/scmi_sensors/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the IIO over SCMI
+#
+obj-$(CONFIG_IIO_SCMI) += scmi_iio.o
diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
new file mode 100644
index 000000000..0c2caf357
--- /dev/null
+++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * System Control and Management Interface(SCMI) based IIO sensor driver
+ *
+ * Copyright (C) 2021 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/scmi_protocol.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#define SCMI_IIO_NUM_OF_AXIS 3
+
+struct scmi_iio_priv {
+	const struct scmi_sensor_proto_ops *sensor_ops;
+	struct scmi_protocol_handle *ph;
+	const struct scmi_sensor_info *sensor_info;
+	struct iio_dev *indio_dev;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
+	/* adding one additional channel for timestamp */
+	s64 iio_buf[SCMI_IIO_NUM_OF_AXIS + 1];
+	struct notifier_block sensor_update_nb;
+	u32 *freq_avail;
+};
+
+static int scmi_iio_sensor_update_cb(struct notifier_block *nb,
+				     unsigned long event, void *data)
+{
+	struct scmi_sensor_update_report *sensor_update = data;
+	struct iio_dev *scmi_iio_dev;
+	struct scmi_iio_priv *sensor;
+	s8 tstamp_scale;
+	u64 time, time_ns;
+	int i;
+
+	if (sensor_update->readings_count == 0)
+		return NOTIFY_DONE;
+
+	sensor = container_of(nb, struct scmi_iio_priv, sensor_update_nb);
+
+	for (i = 0; i < sensor_update->readings_count; i++)
+		sensor->iio_buf[i] = sensor_update->readings[i].value;
+
+	if (!sensor->sensor_info->timestamped) {
+		time_ns = ktime_to_ns(sensor_update->timestamp);
+	} else {
+		/*
+		 *  All the axes are supposed to have the same value for timestamp.
+		 *  We are just using the values from the Axis 0 here.
+		 */
+		time = sensor_update->readings[0].timestamp;
+
+		/*
+		 *  Timestamp returned by SCMI is in seconds and is equal to
+		 *  time * power-of-10 multiplier(tstamp_scale) seconds.
+		 *  Converting the timestamp to nanoseconds below.
+		 */
+		tstamp_scale = sensor->sensor_info->tstamp_scale +
+			       const_ilog2(NSEC_PER_SEC) / const_ilog2(10);
+		if (tstamp_scale < 0) {
+			do_div(time, int_pow(10, abs(tstamp_scale)));
+			time_ns = time;
+		} else {
+			time_ns = time * int_pow(10, tstamp_scale);
+		}
+	}
+
+	scmi_iio_dev = sensor->indio_dev;
+	iio_push_to_buffers_with_timestamp(scmi_iio_dev, sensor->iio_buf,
+					   time_ns);
+	return NOTIFY_OK;
+}
+
+static int scmi_iio_buffer_preenable(struct iio_dev *iio_dev)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u32 sensor_config = 0;
+	int err;
+
+	if (sensor->sensor_info->timestamped)
+		sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK,
+					    SCMI_SENS_CFG_TSTAMP_ENABLE);
+
+	sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
+				    SCMI_SENS_CFG_SENSOR_ENABLE);
+	err = sensor->sensor_ops->config_set(sensor->ph,
+					     sensor->sensor_info->id,
+					     sensor_config);
+	if (err)
+		dev_err(&iio_dev->dev, "Error in enabling sensor %s err %d",
+			sensor->sensor_info->name, err);
+
+	return err;
+}
+
+static int scmi_iio_buffer_postdisable(struct iio_dev *iio_dev)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u32 sensor_config = 0;
+	int err;
+
+	sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
+				    SCMI_SENS_CFG_SENSOR_DISABLE);
+	err = sensor->sensor_ops->config_set(sensor->ph,
+					     sensor->sensor_info->id,
+					     sensor_config);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in disabling sensor %s with err %d",
+			sensor->sensor_info->name, err);
+	}
+
+	return err;
+}
+
+static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = {
+	.preenable = scmi_iio_buffer_preenable,
+	.postdisable = scmi_iio_buffer_postdisable,
+};
+
+static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u64 sec, mult, uHz, sf;
+	u32 sensor_config;
+	char buf[32];
+
+	int err = sensor->sensor_ops->config_get(sensor->ph,
+						 sensor->sensor_info->id,
+						 &sensor_config);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in getting sensor config for sensor %s err %d",
+			sensor->sensor_info->name, err);
+		return err;
+	}
+
+	uHz = val * MICROHZ_PER_HZ + val2;
+
+	/*
+	 * The seconds field in the sensor interval in SCMI is 16 bits long
+	 * Therefore seconds  = 1/Hz <= 0xFFFF. As floating point calculations are
+	 * discouraged in the kernel driver code, to calculate the scale factor (sf)
+	 * (1* 1000000 * sf)/uHz <= 0xFFFF. Therefore, sf <= (uHz * 0xFFFF)/1000000
+	 * To calculate the multiplier,we convert the sf into char string  and
+	 * count the number of characters
+	 */
+	sf = (u64)uHz * 0xFFFF;
+	do_div(sf,  MICROHZ_PER_HZ);
+	mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1;
+
+	sec = int_pow(10, mult) * MICROHZ_PER_HZ;
+	do_div(sec, uHz);
+	if (sec == 0) {
+		dev_err(&iio_dev->dev,
+			"Trying to set invalid sensor update value for sensor %s",
+			sensor->sensor_info->name);
+		return -EINVAL;
+	}
+
+	sensor_config &= ~SCMI_SENS_CFG_UPDATE_SECS_MASK;
+	sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_SECS_MASK, sec);
+	sensor_config &= ~SCMI_SENS_CFG_UPDATE_EXP_MASK;
+	sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_EXP_MASK, -mult);
+
+	if (sensor->sensor_info->timestamped) {
+		sensor_config &= ~SCMI_SENS_CFG_TSTAMP_ENABLED_MASK;
+		sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK,
+					    SCMI_SENS_CFG_TSTAMP_ENABLE);
+	}
+
+	sensor_config &= ~SCMI_SENS_CFG_ROUND_MASK;
+	sensor_config |=
+		FIELD_PREP(SCMI_SENS_CFG_ROUND_MASK, SCMI_SENS_CFG_ROUND_AUTO);
+
+	err = sensor->sensor_ops->config_set(sensor->ph,
+					     sensor->sensor_info->id,
+					     sensor_config);
+	if (err)
+		dev_err(&iio_dev->dev,
+			"Error in setting sensor update interval for sensor %s value %u err %d",
+			sensor->sensor_info->name, sensor_config, err);
+
+	return err;
+}
+
+static int scmi_iio_write_raw(struct iio_dev *iio_dev,
+			      struct iio_chan_spec const *chan, int val,
+			      int val2, long mask)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	int err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&sensor->lock);
+		err = scmi_iio_set_odr_val(iio_dev, val, val2);
+		mutex_unlock(&sensor->lock);
+		return err;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int scmi_iio_read_avail(struct iio_dev *iio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = sensor->freq_avail;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = sensor->sensor_info->intervals.count * 2;
+		if (sensor->sensor_info->intervals.segmented)
+			return IIO_AVAIL_RANGE;
+		else
+			return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void convert_ns_to_freq(u64 interval_ns, u64 *hz, u64 *uhz)
+{
+	u64 rem, freq;
+
+	freq = NSEC_PER_SEC;
+	rem = do_div(freq, interval_ns);
+	*hz = freq;
+	*uhz = rem * 1000000UL;
+	do_div(*uhz, interval_ns);
+}
+
+static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2)
+{
+	u64 sensor_update_interval, sensor_interval_mult, hz, uhz;
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u32 sensor_config;
+	int mult;
+
+	int err = sensor->sensor_ops->config_get(sensor->ph,
+						 sensor->sensor_info->id,
+						 &sensor_config);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in getting sensor config for sensor %s err %d",
+			sensor->sensor_info->name, err);
+		return err;
+	}
+
+	sensor_update_interval =
+		SCMI_SENS_CFG_GET_UPDATE_SECS(sensor_config) * NSEC_PER_SEC;
+
+	mult = SCMI_SENS_CFG_GET_UPDATE_EXP(sensor_config);
+	if (mult < 0) {
+		sensor_interval_mult = int_pow(10, abs(mult));
+		do_div(sensor_update_interval, sensor_interval_mult);
+	} else {
+		sensor_interval_mult = int_pow(10, mult);
+		sensor_update_interval =
+			sensor_update_interval * sensor_interval_mult;
+	}
+
+	convert_ns_to_freq(sensor_update_interval, &hz, &uhz);
+	*val = hz;
+	*val2 = uhz;
+	return 0;
+}
+
+static int scmi_iio_read_channel_data(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *ch, int *val, int *val2)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u32 sensor_config;
+	struct scmi_sensor_reading readings[SCMI_IIO_NUM_OF_AXIS];
+	int err;
+
+	sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
+					SCMI_SENS_CFG_SENSOR_ENABLE);
+	err = sensor->sensor_ops->config_set(
+		sensor->ph, sensor->sensor_info->id, sensor_config);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in enabling sensor %s err %d",
+			sensor->sensor_info->name, err);
+		return err;
+	}
+
+	err = sensor->sensor_ops->reading_get_timestamped(
+		sensor->ph, sensor->sensor_info->id,
+		sensor->sensor_info->num_axis, readings);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in reading raw attribute for sensor %s err %d",
+			sensor->sensor_info->name, err);
+		return err;
+	}
+
+	sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
+					SCMI_SENS_CFG_SENSOR_DISABLE);
+	err = sensor->sensor_ops->config_set(
+		sensor->ph, sensor->sensor_info->id, sensor_config);
+	if (err) {
+		dev_err(&iio_dev->dev,
+			"Error in disabling sensor %s err %d",
+			sensor->sensor_info->name, err);
+		return err;
+	}
+
+	*val = lower_32_bits(readings[ch->scan_index].value);
+	*val2 = upper_32_bits(readings[ch->scan_index].value);
+
+	return IIO_VAL_INT_64;
+}
+
+static int scmi_iio_read_raw(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *ch, int *val,
+			     int *val2, long mask)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	s8 scale;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		scale = sensor->sensor_info->axis[ch->scan_index].scale;
+		if (scale < 0) {
+			*val = 1;
+			*val2 = int_pow(10, abs(scale));
+			return IIO_VAL_FRACTIONAL;
+		}
+		*val = int_pow(10, scale);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = scmi_iio_get_odr_val(iio_dev, val, val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(iio_dev);
+		if (ret)
+			return ret;
+
+		ret = scmi_iio_read_channel_data(iio_dev, ch, val, val2);
+		iio_device_release_direct_mode(iio_dev);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info scmi_iio_info = {
+	.read_raw = scmi_iio_read_raw,
+	.read_avail = scmi_iio_read_avail,
+	.write_raw = scmi_iio_write_raw,
+};
+
+static ssize_t scmi_iio_get_raw_available(struct iio_dev *iio_dev,
+					  uintptr_t private,
+					  const struct iio_chan_spec *chan,
+					  char *buf)
+{
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	u64 resolution, rem;
+	s64 min_range, max_range;
+	s8 exponent, scale;
+	int len = 0;
+
+	/*
+	 * All the axes are supposed to have the same value for range and resolution.
+	 * We are just using the values from the Axis 0 here.
+	 */
+	if (sensor->sensor_info->axis[0].extended_attrs) {
+		min_range = sensor->sensor_info->axis[0].attrs.min_range;
+		max_range = sensor->sensor_info->axis[0].attrs.max_range;
+		resolution = sensor->sensor_info->axis[0].resolution;
+		exponent = sensor->sensor_info->axis[0].exponent;
+		scale = sensor->sensor_info->axis[0].scale;
+
+		/*
+		 * To provide the raw value for the resolution to the userspace,
+		 * need to divide the resolution exponent by the sensor scale
+		 */
+		exponent = exponent - scale;
+		if (exponent < 0) {
+			rem = do_div(resolution,
+				     int_pow(10, abs(exponent))
+				     );
+			len = sysfs_emit(buf,
+					"[%lld %llu.%llu %lld]\n", min_range,
+					resolution, rem, max_range);
+		} else {
+			resolution = resolution * int_pow(10, exponent);
+			len = sysfs_emit(buf, "[%lld %llu %lld]\n",
+					min_range, resolution, max_range);
+		}
+	}
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info scmi_iio_ext_info[] = {
+	{
+		.name = "raw_available",
+		.read = scmi_iio_get_raw_available,
+		.shared = IIO_SHARED_BY_TYPE,
+	},
+	{},
+};
+
+static void scmi_iio_set_timestamp_channel(struct iio_chan_spec *iio_chan,
+					   int scan_index)
+{
+	iio_chan->type = IIO_TIMESTAMP;
+	iio_chan->channel = -1;
+	iio_chan->scan_index = scan_index;
+	iio_chan->scan_type.sign = 'u';
+	iio_chan->scan_type.realbits = 64;
+	iio_chan->scan_type.storagebits = 64;
+}
+
+static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan,
+				      enum iio_chan_type type,
+				      enum iio_modifier mod, int scan_index)
+{
+	iio_chan->type = type;
+	iio_chan->modified = 1;
+	iio_chan->channel2 = mod;
+	iio_chan->info_mask_separate =
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_RAW);
+	iio_chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ);
+	iio_chan->info_mask_shared_by_type_available =
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
+	iio_chan->scan_index = scan_index;
+	iio_chan->scan_type.sign = 's';
+	iio_chan->scan_type.realbits = 64;
+	iio_chan->scan_type.storagebits = 64;
+	iio_chan->scan_type.endianness = IIO_LE;
+	iio_chan->ext_info = scmi_iio_ext_info;
+}
+
+static int scmi_iio_get_chan_modifier(const char *name,
+				      enum iio_modifier *modifier)
+{
+	char *pch, mod;
+
+	if (!name)
+		return -EINVAL;
+
+	pch = strrchr(name, '_');
+	if (!pch)
+		return -EINVAL;
+
+	mod = *(pch + 1);
+	switch (mod) {
+	case 'X':
+		*modifier = IIO_MOD_X;
+		return 0;
+	case 'Y':
+		*modifier = IIO_MOD_Y;
+		return 0;
+	case 'Z':
+		*modifier = IIO_MOD_Z;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int scmi_iio_get_chan_type(u8 scmi_type, enum iio_chan_type *iio_type)
+{
+	switch (scmi_type) {
+	case METERS_SEC_SQUARED:
+		*iio_type = IIO_ACCEL;
+		return 0;
+	case RADIANS_SEC:
+		*iio_type = IIO_ANGL_VEL;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static u64 scmi_iio_convert_interval_to_ns(u32 val)
+{
+	u64 sensor_update_interval =
+		SCMI_SENS_INTVL_GET_SECS(val) * NSEC_PER_SEC;
+	u64 sensor_interval_mult;
+	int mult;
+
+	mult = SCMI_SENS_INTVL_GET_EXP(val);
+	if (mult < 0) {
+		sensor_interval_mult = int_pow(10, abs(mult));
+		do_div(sensor_update_interval, sensor_interval_mult);
+	} else {
+		sensor_interval_mult = int_pow(10, mult);
+		sensor_update_interval =
+			sensor_update_interval * sensor_interval_mult;
+	}
+	return sensor_update_interval;
+}
+
+static int scmi_iio_set_sampling_freq_avail(struct iio_dev *iio_dev)
+{
+	u64 cur_interval_ns, low_interval_ns, high_interval_ns, step_size_ns,
+		hz, uhz;
+	unsigned int cur_interval, low_interval, high_interval, step_size;
+	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
+	int i;
+
+	sensor->freq_avail =
+		devm_kzalloc(&iio_dev->dev,
+			     sizeof(*sensor->freq_avail) *
+				     (sensor->sensor_info->intervals.count * 2),
+			     GFP_KERNEL);
+	if (!sensor->freq_avail)
+		return -ENOMEM;
+
+	if (sensor->sensor_info->intervals.segmented) {
+		low_interval = sensor->sensor_info->intervals
+				       .desc[SCMI_SENS_INTVL_SEGMENT_LOW];
+		low_interval_ns = scmi_iio_convert_interval_to_ns(low_interval);
+		convert_ns_to_freq(low_interval_ns, &hz, &uhz);
+		sensor->freq_avail[0] = hz;
+		sensor->freq_avail[1] = uhz;
+
+		step_size = sensor->sensor_info->intervals
+				    .desc[SCMI_SENS_INTVL_SEGMENT_STEP];
+		step_size_ns = scmi_iio_convert_interval_to_ns(step_size);
+		convert_ns_to_freq(step_size_ns, &hz, &uhz);
+		sensor->freq_avail[2] = hz;
+		sensor->freq_avail[3] = uhz;
+
+		high_interval = sensor->sensor_info->intervals
+					.desc[SCMI_SENS_INTVL_SEGMENT_HIGH];
+		high_interval_ns =
+			scmi_iio_convert_interval_to_ns(high_interval);
+		convert_ns_to_freq(high_interval_ns, &hz, &uhz);
+		sensor->freq_avail[4] = hz;
+		sensor->freq_avail[5] = uhz;
+	} else {
+		for (i = 0; i < sensor->sensor_info->intervals.count; i++) {
+			cur_interval = sensor->sensor_info->intervals.desc[i];
+			cur_interval_ns =
+				scmi_iio_convert_interval_to_ns(cur_interval);
+			convert_ns_to_freq(cur_interval_ns, &hz, &uhz);
+			sensor->freq_avail[i * 2] = hz;
+			sensor->freq_avail[i * 2 + 1] = uhz;
+		}
+	}
+	return 0;
+}
+
+static struct iio_dev *
+scmi_alloc_iiodev(struct scmi_device *sdev,
+		  const struct scmi_sensor_proto_ops *ops,
+		  struct scmi_protocol_handle *ph,
+		  const struct scmi_sensor_info *sensor_info)
+{
+	struct iio_chan_spec *iio_channels;
+	struct scmi_iio_priv *sensor;
+	enum iio_modifier modifier;
+	enum iio_chan_type type;
+	struct iio_dev *iiodev;
+	struct device *dev = &sdev->dev;
+	const struct scmi_handle *handle = sdev->handle;
+	int i, ret;
+
+	iiodev = devm_iio_device_alloc(dev, sizeof(*sensor));
+	if (!iiodev)
+		return ERR_PTR(-ENOMEM);
+
+	iiodev->modes = INDIO_DIRECT_MODE;
+	sensor = iio_priv(iiodev);
+	sensor->sensor_ops = ops;
+	sensor->ph = ph;
+	sensor->sensor_info = sensor_info;
+	sensor->sensor_update_nb.notifier_call = scmi_iio_sensor_update_cb;
+	sensor->indio_dev = iiodev;
+	mutex_init(&sensor->lock);
+
+	/* adding one additional channel for timestamp */
+	iiodev->num_channels = sensor_info->num_axis + 1;
+	iiodev->name = sensor_info->name;
+	iiodev->info = &scmi_iio_info;
+
+	iio_channels =
+		devm_kzalloc(dev,
+			     sizeof(*iio_channels) * (iiodev->num_channels),
+			     GFP_KERNEL);
+	if (!iio_channels)
+		return ERR_PTR(-ENOMEM);
+
+	ret = scmi_iio_set_sampling_freq_avail(iiodev);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	for (i = 0; i < sensor_info->num_axis; i++) {
+		ret = scmi_iio_get_chan_type(sensor_info->axis[i].type, &type);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		ret = scmi_iio_get_chan_modifier(sensor_info->axis[i].name,
+						 &modifier);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		scmi_iio_set_data_channel(&iio_channels[i], type, modifier,
+					  sensor_info->axis[i].id);
+	}
+
+	ret = handle->notify_ops->devm_event_notifier_register(sdev,
+				SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE,
+				&sensor->sensor_info->id,
+				&sensor->sensor_update_nb);
+	if (ret) {
+		dev_err(&iiodev->dev,
+			"Error in registering sensor update notifier for sensor %s err %d",
+			sensor->sensor_info->name, ret);
+		return ERR_PTR(ret);
+	}
+
+	scmi_iio_set_timestamp_channel(&iio_channels[i], i);
+	iiodev->channels = iio_channels;
+	return iiodev;
+}
+
+static int scmi_iio_dev_probe(struct scmi_device *sdev)
+{
+	const struct scmi_sensor_info *sensor_info;
+	struct scmi_handle *handle = sdev->handle;
+	const struct scmi_sensor_proto_ops *sensor_ops;
+	struct scmi_protocol_handle *ph;
+	struct device *dev = &sdev->dev;
+	struct iio_dev *scmi_iio_dev;
+	u16 nr_sensors;
+	int err = -ENODEV, i;
+
+	if (!handle)
+		return -ENODEV;
+
+	sensor_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_SENSOR, &ph);
+	if (IS_ERR(sensor_ops)) {
+		dev_err(dev, "SCMI device has no sensor interface\n");
+		return PTR_ERR(sensor_ops);
+	}
+
+	nr_sensors = sensor_ops->count_get(ph);
+	if (!nr_sensors) {
+		dev_dbg(dev, "0 sensors found via SCMI bus\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < nr_sensors; i++) {
+		sensor_info = sensor_ops->info_get(ph, i);
+		if (!sensor_info) {
+			dev_err(dev, "SCMI sensor %d has missing info\n", i);
+			return -EINVAL;
+		}
+
+		/* This driver only supports 3-axis accel and gyro, skipping other sensors */
+		if (sensor_info->num_axis != SCMI_IIO_NUM_OF_AXIS)
+			continue;
+
+		/* This driver only supports 3-axis accel and gyro, skipping other sensors */
+		if (sensor_info->axis[0].type != METERS_SEC_SQUARED &&
+		    sensor_info->axis[0].type != RADIANS_SEC)
+			continue;
+
+		scmi_iio_dev = scmi_alloc_iiodev(sdev, sensor_ops, ph,
+						 sensor_info);
+		if (IS_ERR(scmi_iio_dev)) {
+			dev_err(dev,
+				"failed to allocate IIO device for sensor %s: %ld\n",
+				sensor_info->name, PTR_ERR(scmi_iio_dev));
+			return PTR_ERR(scmi_iio_dev);
+		}
+
+		err = devm_iio_kfifo_buffer_setup(&scmi_iio_dev->dev,
+						  scmi_iio_dev,
+						  &scmi_iio_buffer_ops);
+		if (err < 0) {
+			dev_err(dev,
+				"IIO buffer setup error at sensor %s: %d\n",
+				sensor_info->name, err);
+			return err;
+		}
+
+		err = devm_iio_device_register(dev, scmi_iio_dev);
+		if (err) {
+			dev_err(dev,
+				"IIO device registration failed at sensor %s: %d\n",
+				sensor_info->name, err);
+			return err;
+		}
+	}
+	return err;
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_SENSOR, "iiodev" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_iiodev_driver = {
+	.name = "scmi-sensor-iiodev",
+	.probe = scmi_iio_dev_probe,
+	.id_table = scmi_id_table,
+};
+
+module_scmi_driver(scmi_iiodev_driver);
+
+MODULE_AUTHOR("Jyoti Bhayana <jbhayana@google.com>");
+MODULE_DESCRIPTION("SCMI IIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/ssp_sensors/Kconfig b/drivers/iio/common/ssp_sensors/Kconfig
new file mode 100644
index 000000000..5262409e4
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# SSP sensor drivers and commons configuration
+#
+menu "SSP Sensor Common"
+
+config IIO_SSP_SENSORS_COMMONS
+	tristate "Commons for all SSP Sensor IIO drivers"
+	depends on IIO_SSP_SENSORHUB
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say yes here to build commons for SSP sensors.
+	  To compile this as a module, choose M here: the module
+	  will be called ssp_iio.
+
+config IIO_SSP_SENSORHUB
+	tristate "Samsung Sensorhub driver"
+	depends on SPI
+	select MFD_CORE
+	help
+	  SSP driver for sensorhub.
+	  If you say yes here you get ssp support for sensorhub.
+	  To compile this driver as a module, choose M here: the
+	  module will be called sensorhub.
+
+endmenu
diff --git a/drivers/iio/common/ssp_sensors/Makefile b/drivers/iio/common/ssp_sensors/Makefile
new file mode 100644
index 000000000..ba831429b
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for SSP sensor drivers and commons.
+#
+
+sensorhub-objs				:= ssp_dev.o ssp_spi.o
+obj-$(CONFIG_IIO_SSP_SENSORHUB)		+= sensorhub.o
+
+obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) 	+= ssp_iio.o
diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
new file mode 100644
index 000000000..f649cdecc
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/ssp.h
@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ */
+
+#ifndef __SSP_SENSORHUB_H__
+#define __SSP_SENSORHUB_H__
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/common/ssp_sensors.h>
+#include <linux/iio/iio.h>
+#include <linux/spi/spi.h>
+
+#define SSP_DEVICE_ID		0x55
+
+#ifdef SSP_DBG
+#define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__)
+#else
+#define ssp_dbg(format, ...)
+#endif
+
+#define SSP_SW_RESET_TIME		3000
+/* Sensor polling in ms */
+#define SSP_DEFAULT_POLLING_DELAY	200
+#define SSP_DEFAULT_RETRIES		3
+#define SSP_DATA_PACKET_SIZE		960
+#define SSP_HEADER_BUFFER_SIZE		4
+
+enum {
+	SSP_KERNEL_BINARY = 0,
+	SSP_KERNEL_CRASHED_BINARY,
+};
+
+enum {
+	SSP_INITIALIZATION_STATE = 0,
+	SSP_NO_SENSOR_STATE,
+	SSP_ADD_SENSOR_STATE,
+	SSP_RUNNING_SENSOR_STATE,
+};
+
+/* Firmware download STATE */
+enum {
+	SSP_FW_DL_STATE_FAIL = -1,
+	SSP_FW_DL_STATE_NONE = 0,
+	SSP_FW_DL_STATE_NEED_TO_SCHEDULE,
+	SSP_FW_DL_STATE_SCHEDULED,
+	SSP_FW_DL_STATE_DOWNLOADING,
+	SSP_FW_DL_STATE_SYNC,
+	SSP_FW_DL_STATE_DONE,
+};
+
+#define SSP_INVALID_REVISION			99999
+#define SSP_INVALID_REVISION2			0xffffff
+
+/* AP -> SSP Instruction */
+#define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD	0xa1
+#define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM	0xa2
+#define SSP_MSG2SSP_INST_REMOVE_ALL		0xa3
+#define SSP_MSG2SSP_INST_CHANGE_DELAY		0xa4
+#define SSP_MSG2SSP_INST_LIBRARY_ADD		0xb1
+#define SSP_MSG2SSP_INST_LIBRARY_REMOVE		0xb2
+#define SSP_MSG2SSP_INST_LIB_NOTI		0xb4
+#define SSP_MSG2SSP_INST_LIB_DATA		0xc1
+
+#define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL		0xcd
+#define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL	0xce
+#define SSP_MSG2SSP_AP_STATUS_SHUTDOWN		0xd0
+#define SSP_MSG2SSP_AP_STATUS_WAKEUP		0xd1
+#define SSP_MSG2SSP_AP_STATUS_SLEEP		0xd2
+#define SSP_MSG2SSP_AP_STATUS_RESUME		0xd3
+#define SSP_MSG2SSP_AP_STATUS_SUSPEND		0xd4
+#define SSP_MSG2SSP_AP_STATUS_RESET		0xd5
+#define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED	0xd6
+#define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED	0xd7
+#define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE	0xda
+#define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE		0xdb
+#define SSP_MSG2SSP_AP_MCU_DUMP_CHECK		0xdc
+#define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH		0xdd
+#define SSP_MSG2SSP_AP_MCU_BATCH_COUNT		0xdf
+
+#define SSP_MSG2SSP_AP_WHOAMI				0x0f
+#define SSP_MSG2SSP_AP_FIRMWARE_REV			0xf0
+#define SSP_MSG2SSP_AP_SENSOR_FORMATION			0xf1
+#define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD		0xf2
+#define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL		0xf3
+#define SSP_MSG2SSP_AP_SENSOR_SCANNING			0xf4
+#define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET		0xf5
+#define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET		0xf6
+#define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT		0xf7
+#define SSP_MSG2SSP_AP_GET_THERM			0xf8
+#define SSP_MSG2SSP_AP_GET_BIG_DATA			0xf9
+#define SSP_MSG2SSP_AP_SET_BIG_DATA			0xfa
+#define SSP_MSG2SSP_AP_START_BIG_DATA			0xfb
+#define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX	0xfd
+#define SSP_MSG2SSP_AP_SENSOR_TILT			0xea
+#define SSP_MSG2SSP_AP_MCU_SET_TIME			0xfe
+#define SSP_MSG2SSP_AP_MCU_GET_TIME			0xff
+
+#define SSP_MSG2SSP_AP_FUSEROM				0x01
+
+/* voice data */
+#define SSP_TYPE_WAKE_UP_VOICE_SERVICE			0x01
+#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM		0x01
+#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER	0x02
+
+/* Factory Test */
+#define SSP_ACCELEROMETER_FACTORY			0x80
+#define SSP_GYROSCOPE_FACTORY				0x81
+#define SSP_GEOMAGNETIC_FACTORY				0x82
+#define SSP_PRESSURE_FACTORY				0x85
+#define SSP_GESTURE_FACTORY				0x86
+#define SSP_TEMPHUMIDITY_CRC_FACTORY			0x88
+#define SSP_GYROSCOPE_TEMP_FACTORY			0x8a
+#define SSP_GYROSCOPE_DPS_FACTORY			0x8b
+#define SSP_MCU_FACTORY					0x8c
+#define SSP_MCU_SLEEP_FACTORY				0x8d
+
+/* SSP -> AP ACK about write CMD */
+#define SSP_MSG_ACK		0x80	/* ACK from SSP to AP */
+#define SSP_MSG_NAK		0x70	/* NAK from SSP to AP */
+
+struct ssp_sensorhub_info {
+	char *fw_name;
+	char *fw_crashed_name;
+	unsigned int fw_rev;
+	const u8 * const mag_table;
+	const unsigned int mag_length;
+};
+
+/* ssp_msg options bit */
+#define SSP_RW		0
+#define SSP_INDEX	3
+
+#define SSP_AP2HUB_READ		0
+#define SSP_AP2HUB_WRITE	1
+#define SSP_HUB2AP_WRITE	2
+#define SSP_AP2HUB_READY	3
+#define SSP_AP2HUB_RETURN	4
+
+/**
+ * struct ssp_data - ssp platformdata structure
+ * @spi:		spi device
+ * @sensorhub_info:	info about sensorhub board specific features
+ * @wdt_timer:		watchdog timer
+ * @work_wdt:		watchdog work
+ * @work_firmware:	firmware upgrade work queue
+ * @work_refresh:	refresh work queue for reset request from MCU
+ * @shut_down:		shut down flag
+ * @mcu_dump_mode:	mcu dump mode for debug
+ * @time_syncing:	time syncing indication flag
+ * @timestamp:		previous time in ns calculated for time syncing
+ * @check_status:	status table for each sensor
+ * @com_fail_cnt:	communication fail count
+ * @reset_cnt:		reset count
+ * @timeout_cnt:	timeout count
+ * @available_sensors:	available sensors seen by sensorhub (bit array)
+ * @cur_firm_rev:	cached current firmware revision
+ * @last_resume_state:	last AP resume/suspend state used to handle the PM
+ *                      state of ssp
+ * @last_ap_state:	(obsolete) sleep notification for MCU
+ * @sensor_enable:	sensor enable mask
+ * @delay_buf:		data acquisition intervals table
+ * @batch_latency_buf:	yet unknown but existing in communication protocol
+ * @batch_opt_buf:	yet unknown but existing in communication protocol
+ * @accel_position:	yet unknown but existing in communication protocol
+ * @mag_position:	yet unknown but existing in communication protocol
+ * @fw_dl_state:	firmware download state
+ * @comm_lock:		lock protecting the handshake
+ * @pending_lock:	lock protecting pending list and completion
+ * @mcu_reset_gpiod:	mcu reset line
+ * @ap_mcu_gpiod:	ap to mcu gpio line
+ * @mcu_ap_gpiod:	mcu to ap gpio line
+ * @pending_list:	pending list for messages queued to be sent/read
+ * @sensor_devs:	registered IIO devices table
+ * @enable_refcount:	enable reference count for wdt (watchdog timer)
+ * @header_buffer:	cache aligned buffer for packet header
+ */
+struct ssp_data {
+	struct spi_device *spi;
+	const struct ssp_sensorhub_info *sensorhub_info;
+	struct timer_list wdt_timer;
+	struct work_struct work_wdt;
+	struct delayed_work work_refresh;
+
+	bool shut_down;
+	bool mcu_dump_mode;
+	bool time_syncing;
+	int64_t timestamp;
+
+	int check_status[SSP_SENSOR_MAX];
+
+	unsigned int com_fail_cnt;
+	unsigned int reset_cnt;
+	unsigned int timeout_cnt;
+
+	unsigned int available_sensors;
+	unsigned int cur_firm_rev;
+
+	char last_resume_state;
+	char last_ap_state;
+
+	unsigned int sensor_enable;
+	u32 delay_buf[SSP_SENSOR_MAX];
+	s32 batch_latency_buf[SSP_SENSOR_MAX];
+	s8 batch_opt_buf[SSP_SENSOR_MAX];
+
+	int accel_position;
+	int mag_position;
+	int fw_dl_state;
+
+	struct mutex comm_lock;
+	struct mutex pending_lock;
+
+	struct gpio_desc *mcu_reset_gpiod;
+	struct gpio_desc *ap_mcu_gpiod;
+	struct gpio_desc *mcu_ap_gpiod;
+
+	struct list_head pending_list;
+
+	struct iio_dev *sensor_devs[SSP_SENSOR_MAX];
+	atomic_t enable_refcount;
+
+	__le16 header_buffer[SSP_HEADER_BUFFER_SIZE / sizeof(__le16)] __aligned(IIO_DMA_MINALIGN);
+};
+
+void ssp_clean_pending_list(struct ssp_data *data);
+
+int ssp_command(struct ssp_data *data, char command, int arg);
+
+int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
+			 u8 *send_buf, u8 length);
+
+int ssp_irq_msg(struct ssp_data *data);
+
+int ssp_get_chipid(struct ssp_data *data);
+
+int ssp_set_magnetic_matrix(struct ssp_data *data);
+
+unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data);
+
+unsigned int ssp_get_firmware_rev(struct ssp_data *data);
+
+int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay);
+
+#endif /* __SSP_SENSORHUB_H__ */
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
new file mode 100644
index 000000000..e64d24214
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#include "ssp.h"
+
+#define SSP_WDT_TIME			10000
+#define SSP_LIMIT_RESET_CNT		20
+#define SSP_LIMIT_TIMEOUT_CNT		3
+
+/* It is possible that it is max clk rate for version 1.0 of bootcode */
+#define SSP_BOOT_SPI_HZ	400000
+
+/*
+ * These fields can look enigmatic but this structure is used mainly to flat
+ * some values and depends on command type.
+ */
+struct ssp_instruction {
+	__le32 a;
+	__le32 b;
+	u8 c;
+} __attribute__((__packed__));
+
+static const u8 ssp_magnitude_table[] = {110, 85, 171, 71, 203, 195, 0, 67,
+	208, 56, 175, 244, 206, 213, 0, 92, 250, 0, 55, 48, 189, 252, 171,
+	243, 13, 45, 250};
+
+static const struct ssp_sensorhub_info ssp_rinato_info = {
+	.fw_name = "ssp_B2.fw",
+	.fw_crashed_name = "ssp_crashed.fw",
+	.fw_rev = 14052300,
+	.mag_table = ssp_magnitude_table,
+	.mag_length = ARRAY_SIZE(ssp_magnitude_table),
+};
+
+static const struct ssp_sensorhub_info ssp_thermostat_info = {
+	.fw_name = "thermostat_B2.fw",
+	.fw_crashed_name = "ssp_crashed.fw",
+	.fw_rev = 14080600,
+	.mag_table = ssp_magnitude_table,
+	.mag_length = ARRAY_SIZE(ssp_magnitude_table),
+};
+
+static const struct mfd_cell sensorhub_sensor_devs[] = {
+	{
+		.name = "ssp-accelerometer",
+	},
+	{
+		.name = "ssp-gyroscope",
+	},
+};
+
+static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data)
+{
+	gpiod_set_value(data->mcu_reset_gpiod, 0);
+	usleep_range(1000, 1200);
+	gpiod_set_value(data->mcu_reset_gpiod, 1);
+	msleep(50);
+}
+
+static void ssp_sync_available_sensors(struct ssp_data *data)
+{
+	int i, ret;
+
+	for (i = 0; i < SSP_SENSOR_MAX; ++i) {
+		if (data->available_sensors & BIT(i)) {
+			ret = ssp_enable_sensor(data, i, data->delay_buf[i]);
+			if (ret < 0) {
+				dev_err(&data->spi->dev,
+					"Sync sensor nr: %d fail\n", i);
+				continue;
+			}
+		}
+	}
+
+	ret = ssp_command(data, SSP_MSG2SSP_AP_MCU_SET_DUMPMODE,
+			  data->mcu_dump_mode);
+	if (ret < 0)
+		dev_err(&data->spi->dev,
+			"SSP_MSG2SSP_AP_MCU_SET_DUMPMODE failed\n");
+}
+
+static void ssp_enable_mcu(struct ssp_data *data, bool enable)
+{
+	dev_info(&data->spi->dev, "current shutdown = %d, old = %d\n", enable,
+		 data->shut_down);
+
+	if (enable && data->shut_down) {
+		data->shut_down = false;
+		enable_irq(data->spi->irq);
+		enable_irq_wake(data->spi->irq);
+	} else if (!enable && !data->shut_down) {
+		data->shut_down = true;
+		disable_irq(data->spi->irq);
+		disable_irq_wake(data->spi->irq);
+	} else {
+		dev_warn(&data->spi->dev, "current shutdown = %d, old = %d\n",
+			 enable, data->shut_down);
+	}
+}
+
+/*
+ * This function is the first one which communicates with the mcu so it is
+ * possible that the first attempt will fail
+ */
+static int ssp_check_fwbl(struct ssp_data *data)
+{
+	int retries = 0;
+
+	while (retries++ < 5) {
+		data->cur_firm_rev = ssp_get_firmware_rev(data);
+		if (data->cur_firm_rev == SSP_INVALID_REVISION ||
+		    data->cur_firm_rev == SSP_INVALID_REVISION2) {
+			dev_warn(&data->spi->dev,
+				 "Invalid revision, trying %d time\n", retries);
+		} else {
+			break;
+		}
+	}
+
+	if (data->cur_firm_rev == SSP_INVALID_REVISION ||
+	    data->cur_firm_rev == SSP_INVALID_REVISION2) {
+		dev_err(&data->spi->dev, "SSP_INVALID_REVISION\n");
+		return SSP_FW_DL_STATE_NEED_TO_SCHEDULE;
+	}
+
+	dev_info(&data->spi->dev,
+		 "MCU Firm Rev : Old = %8u, New = %8u\n",
+		 data->cur_firm_rev,
+		 data->sensorhub_info->fw_rev);
+
+	if (data->cur_firm_rev != data->sensorhub_info->fw_rev)
+		return SSP_FW_DL_STATE_NEED_TO_SCHEDULE;
+
+	return SSP_FW_DL_STATE_NONE;
+}
+
+static void ssp_reset_mcu(struct ssp_data *data)
+{
+	ssp_enable_mcu(data, false);
+	ssp_clean_pending_list(data);
+	ssp_toggle_mcu_reset_gpio(data);
+	ssp_enable_mcu(data, true);
+}
+
+static void ssp_wdt_work_func(struct work_struct *work)
+{
+	struct ssp_data *data = container_of(work, struct ssp_data, work_wdt);
+
+	dev_err(&data->spi->dev, "%s - Sensor state: 0x%x, RC: %u, CC: %u\n",
+		__func__, data->available_sensors, data->reset_cnt,
+		data->com_fail_cnt);
+
+	ssp_reset_mcu(data);
+	data->com_fail_cnt = 0;
+	data->timeout_cnt = 0;
+}
+
+static void ssp_wdt_timer_func(struct timer_list *t)
+{
+	struct ssp_data *data = from_timer(data, t, wdt_timer);
+
+	switch (data->fw_dl_state) {
+	case SSP_FW_DL_STATE_FAIL:
+	case SSP_FW_DL_STATE_DOWNLOADING:
+	case SSP_FW_DL_STATE_SYNC:
+		goto _mod;
+	}
+
+	if (data->timeout_cnt > SSP_LIMIT_TIMEOUT_CNT ||
+	    data->com_fail_cnt > SSP_LIMIT_RESET_CNT)
+		queue_work(system_power_efficient_wq, &data->work_wdt);
+_mod:
+	mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME));
+}
+
+static void ssp_enable_wdt_timer(struct ssp_data *data)
+{
+	mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME));
+}
+
+static void ssp_disable_wdt_timer(struct ssp_data *data)
+{
+	del_timer_sync(&data->wdt_timer);
+	cancel_work_sync(&data->work_wdt);
+}
+
+/**
+ * ssp_get_sensor_delay() - gets sensor data acquisition period
+ * @data:	sensorhub structure
+ * @type:	SSP sensor type
+ *
+ * Returns acquisition period in ms
+ */
+u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type type)
+{
+	return data->delay_buf[type];
+}
+EXPORT_SYMBOL_NS(ssp_get_sensor_delay, IIO_SSP_SENSORS);
+
+/**
+ * ssp_enable_sensor() - enables data acquisition for sensor
+ * @data:	sensorhub structure
+ * @type:	SSP sensor type
+ * @delay:	delay in ms
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type,
+		      u32 delay)
+{
+	int ret;
+	struct ssp_instruction to_send;
+
+	to_send.a = cpu_to_le32(delay);
+	to_send.b = cpu_to_le32(data->batch_latency_buf[type]);
+	to_send.c = data->batch_opt_buf[type];
+
+	switch (data->check_status[type]) {
+	case SSP_INITIALIZATION_STATE:
+		/* do calibration step, now just enable */
+	case SSP_ADD_SENSOR_STATE:
+		ret = ssp_send_instruction(data,
+					   SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD,
+					   type,
+					   (u8 *)&to_send, sizeof(to_send));
+		if (ret < 0) {
+			dev_err(&data->spi->dev, "Enabling sensor failed\n");
+			data->check_status[type] = SSP_NO_SENSOR_STATE;
+			goto derror;
+		}
+
+		data->sensor_enable |= BIT(type);
+		data->check_status[type] = SSP_RUNNING_SENSOR_STATE;
+		break;
+	case SSP_RUNNING_SENSOR_STATE:
+		ret = ssp_send_instruction(data,
+					   SSP_MSG2SSP_INST_CHANGE_DELAY, type,
+					   (u8 *)&to_send, sizeof(to_send));
+		if (ret < 0) {
+			dev_err(&data->spi->dev,
+				"Changing sensor delay failed\n");
+			goto derror;
+		}
+		break;
+	default:
+		data->check_status[type] = SSP_ADD_SENSOR_STATE;
+		break;
+	}
+
+	data->delay_buf[type] = delay;
+
+	if (atomic_inc_return(&data->enable_refcount) == 1)
+		ssp_enable_wdt_timer(data);
+
+	return 0;
+
+derror:
+	return ret;
+}
+EXPORT_SYMBOL_NS(ssp_enable_sensor, IIO_SSP_SENSORS);
+
+/**
+ * ssp_change_delay() - changes data acquisition for sensor
+ * @data:	sensorhub structure
+ * @type:	SSP sensor type
+ * @delay:	delay in ms
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type,
+		     u32 delay)
+{
+	int ret;
+	struct ssp_instruction to_send;
+
+	to_send.a = cpu_to_le32(delay);
+	to_send.b = cpu_to_le32(data->batch_latency_buf[type]);
+	to_send.c = data->batch_opt_buf[type];
+
+	ret = ssp_send_instruction(data, SSP_MSG2SSP_INST_CHANGE_DELAY, type,
+				   (u8 *)&to_send, sizeof(to_send));
+	if (ret < 0) {
+		dev_err(&data->spi->dev, "Changing sensor delay failed\n");
+		return ret;
+	}
+
+	data->delay_buf[type] = delay;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ssp_change_delay, IIO_SSP_SENSORS);
+
+/**
+ * ssp_disable_sensor() - disables sensor
+ *
+ * @data:	sensorhub structure
+ * @type:	SSP sensor type
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type)
+{
+	int ret;
+	__le32 command;
+
+	if (data->sensor_enable & BIT(type)) {
+		command = cpu_to_le32(data->delay_buf[type]);
+
+		ret = ssp_send_instruction(data,
+					   SSP_MSG2SSP_INST_BYPASS_SENSOR_RM,
+					   type, (u8 *)&command,
+					   sizeof(command));
+		if (ret < 0) {
+			dev_err(&data->spi->dev, "Remove sensor fail\n");
+			return ret;
+		}
+
+		data->sensor_enable &= ~BIT(type);
+	}
+
+	data->check_status[type] = SSP_ADD_SENSOR_STATE;
+
+	if (atomic_dec_and_test(&data->enable_refcount))
+		ssp_disable_wdt_timer(data);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(ssp_disable_sensor, IIO_SSP_SENSORS);
+
+static irqreturn_t ssp_irq_thread_fn(int irq, void *dev_id)
+{
+	struct ssp_data *data = dev_id;
+
+	/*
+	 * This wrapper is done to preserve error path for ssp_irq_msg, also
+	 * it is defined in different file.
+	 */
+	ssp_irq_msg(data);
+
+	return IRQ_HANDLED;
+}
+
+static int ssp_initialize_mcu(struct ssp_data *data)
+{
+	int ret;
+
+	ssp_clean_pending_list(data);
+
+	ret = ssp_get_chipid(data);
+	if (ret != SSP_DEVICE_ID) {
+		dev_err(&data->spi->dev, "%s - MCU %s ret = %d\n", __func__,
+			ret < 0 ? "is not working" : "identification failed",
+			ret);
+		return ret < 0 ? ret : -ENODEV;
+	}
+
+	dev_info(&data->spi->dev, "MCU device ID = %d\n", ret);
+
+	/*
+	 * needs clarification, for now do not want to export all transfer
+	 * methods to sensors' drivers
+	 */
+	ret = ssp_set_magnetic_matrix(data);
+	if (ret < 0) {
+		dev_err(&data->spi->dev,
+			"%s - ssp_set_magnetic_matrix failed\n", __func__);
+		return ret;
+	}
+
+	data->available_sensors = ssp_get_sensor_scanning_info(data);
+	if (data->available_sensors == 0) {
+		dev_err(&data->spi->dev,
+			"%s - ssp_get_sensor_scanning_info failed\n", __func__);
+		return -EIO;
+	}
+
+	data->cur_firm_rev = ssp_get_firmware_rev(data);
+	dev_info(&data->spi->dev, "MCU Firm Rev : New = %8u\n",
+		 data->cur_firm_rev);
+
+	return ssp_command(data, SSP_MSG2SSP_AP_MCU_DUMP_CHECK, 0);
+}
+
+/*
+ * sensorhub can request its reinitialization as some brutal and rare error
+ * handling. It can be requested from the MCU.
+ */
+static void ssp_refresh_task(struct work_struct *work)
+{
+	struct ssp_data *data = container_of((struct delayed_work *)work,
+					     struct ssp_data, work_refresh);
+
+	dev_info(&data->spi->dev, "refreshing\n");
+
+	data->reset_cnt++;
+
+	if (ssp_initialize_mcu(data) >= 0) {
+		ssp_sync_available_sensors(data);
+		if (data->last_ap_state != 0)
+			ssp_command(data, data->last_ap_state, 0);
+
+		if (data->last_resume_state != 0)
+			ssp_command(data, data->last_resume_state, 0);
+
+		data->timeout_cnt = 0;
+		data->com_fail_cnt = 0;
+	}
+}
+
+int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay)
+{
+	cancel_delayed_work_sync(&data->work_refresh);
+
+	return queue_delayed_work(system_power_efficient_wq,
+				  &data->work_refresh,
+				  msecs_to_jiffies(delay));
+}
+
+static const struct of_device_id ssp_of_match[] = {
+	{
+		.compatible	= "samsung,sensorhub-rinato",
+		.data		= &ssp_rinato_info,
+	}, {
+		.compatible	= "samsung,sensorhub-thermostat",
+		.data		= &ssp_thermostat_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ssp_of_match);
+
+static struct ssp_data *ssp_parse_dt(struct device *dev)
+{
+	struct ssp_data *data;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return NULL;
+
+	data->mcu_ap_gpiod = devm_gpiod_get(dev, "mcu-ap", GPIOD_IN);
+	if (IS_ERR(data->mcu_ap_gpiod))
+		return NULL;
+
+	data->ap_mcu_gpiod = devm_gpiod_get(dev, "ap-mcu", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->ap_mcu_gpiod))
+		return NULL;
+
+	data->mcu_reset_gpiod = devm_gpiod_get(dev, "mcu-reset",
+					       GPIOD_OUT_HIGH);
+	if (IS_ERR(data->mcu_reset_gpiod))
+		return NULL;
+
+	data->sensorhub_info = device_get_match_data(dev);
+
+	dev_set_drvdata(dev, data);
+
+	return data;
+}
+
+/**
+ * ssp_register_consumer() - registers iio consumer in ssp framework
+ *
+ * @indio_dev:	consumer iio device
+ * @type:	ssp sensor type
+ */
+void ssp_register_consumer(struct iio_dev *indio_dev, enum ssp_sensor_type type)
+{
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	data->sensor_devs[type] = indio_dev;
+}
+EXPORT_SYMBOL_NS(ssp_register_consumer, IIO_SSP_SENSORS);
+
+static int ssp_probe(struct spi_device *spi)
+{
+	int ret, i;
+	struct ssp_data *data;
+
+	data = ssp_parse_dt(&spi->dev);
+	if (!data) {
+		dev_err(&spi->dev, "Failed to find platform data\n");
+		return -ENODEV;
+	}
+
+	ret = mfd_add_devices(&spi->dev, PLATFORM_DEVID_NONE,
+			      sensorhub_sensor_devs,
+			      ARRAY_SIZE(sensorhub_sensor_devs), NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "mfd add devices fail\n");
+		return ret;
+	}
+
+	spi->mode = SPI_MODE_1;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Failed to setup spi\n");
+		return ret;
+	}
+
+	data->fw_dl_state = SSP_FW_DL_STATE_NONE;
+	data->spi = spi;
+	spi_set_drvdata(spi, data);
+
+	mutex_init(&data->comm_lock);
+
+	for (i = 0; i < SSP_SENSOR_MAX; ++i) {
+		data->delay_buf[i] = SSP_DEFAULT_POLLING_DELAY;
+		data->batch_latency_buf[i] = 0;
+		data->batch_opt_buf[i] = 0;
+		data->check_status[i] = SSP_INITIALIZATION_STATE;
+	}
+
+	data->delay_buf[SSP_BIO_HRM_LIB] = 100;
+
+	data->time_syncing = true;
+
+	mutex_init(&data->pending_lock);
+	INIT_LIST_HEAD(&data->pending_list);
+
+	atomic_set(&data->enable_refcount, 0);
+
+	INIT_WORK(&data->work_wdt, ssp_wdt_work_func);
+	INIT_DELAYED_WORK(&data->work_refresh, ssp_refresh_task);
+
+	timer_setup(&data->wdt_timer, ssp_wdt_timer_func, 0);
+
+	ret = request_threaded_irq(data->spi->irq, NULL,
+				   ssp_irq_thread_fn,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "SSP_Int", data);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Irq request fail\n");
+		goto err_setup_irq;
+	}
+
+	/* Let's start with enabled one so irq balance could be ok */
+	data->shut_down = false;
+
+	/* just to avoid unbalanced irq set wake up */
+	enable_irq_wake(data->spi->irq);
+
+	data->fw_dl_state = ssp_check_fwbl(data);
+	if (data->fw_dl_state == SSP_FW_DL_STATE_NONE) {
+		ret = ssp_initialize_mcu(data);
+		if (ret < 0) {
+			dev_err(&spi->dev, "Initialize_mcu failed\n");
+			goto err_read_reg;
+		}
+	} else {
+		dev_err(&spi->dev, "Firmware version not supported\n");
+		ret = -EPERM;
+		goto err_read_reg;
+	}
+
+	return 0;
+
+err_read_reg:
+	free_irq(data->spi->irq, data);
+err_setup_irq:
+	mutex_destroy(&data->pending_lock);
+	mutex_destroy(&data->comm_lock);
+
+	dev_err(&spi->dev, "Probe failed!\n");
+
+	return ret;
+}
+
+static void ssp_remove(struct spi_device *spi)
+{
+	struct ssp_data *data = spi_get_drvdata(spi);
+
+	if (ssp_command(data, SSP_MSG2SSP_AP_STATUS_SHUTDOWN, 0) < 0)
+		dev_err(&data->spi->dev,
+			"SSP_MSG2SSP_AP_STATUS_SHUTDOWN failed\n");
+
+	ssp_enable_mcu(data, false);
+	ssp_disable_wdt_timer(data);
+
+	ssp_clean_pending_list(data);
+
+	free_irq(data->spi->irq, data);
+
+	del_timer_sync(&data->wdt_timer);
+	cancel_work_sync(&data->work_wdt);
+
+	mutex_destroy(&data->comm_lock);
+	mutex_destroy(&data->pending_lock);
+
+	mfd_remove_devices(&spi->dev);
+}
+
+static int ssp_suspend(struct device *dev)
+{
+	int ret;
+	struct ssp_data *data = spi_get_drvdata(to_spi_device(dev));
+
+	data->last_resume_state = SSP_MSG2SSP_AP_STATUS_SUSPEND;
+
+	if (atomic_read(&data->enable_refcount) > 0)
+		ssp_disable_wdt_timer(data);
+
+	ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_SUSPEND, 0);
+	if (ret < 0) {
+		dev_err(&data->spi->dev,
+			"%s SSP_MSG2SSP_AP_STATUS_SUSPEND failed\n", __func__);
+
+		ssp_enable_wdt_timer(data);
+		return ret;
+	}
+
+	data->time_syncing = false;
+	disable_irq(data->spi->irq);
+
+	return 0;
+}
+
+static int ssp_resume(struct device *dev)
+{
+	int ret;
+	struct ssp_data *data = spi_get_drvdata(to_spi_device(dev));
+
+	enable_irq(data->spi->irq);
+
+	if (atomic_read(&data->enable_refcount) > 0)
+		ssp_enable_wdt_timer(data);
+
+	ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_RESUME, 0);
+	if (ret < 0) {
+		dev_err(&data->spi->dev,
+			"%s SSP_MSG2SSP_AP_STATUS_RESUME failed\n", __func__);
+		ssp_disable_wdt_timer(data);
+		return ret;
+	}
+
+	/* timesyncing is set by MCU */
+	data->last_resume_state = SSP_MSG2SSP_AP_STATUS_RESUME;
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ssp_pm_ops, ssp_suspend, ssp_resume);
+
+static struct spi_driver ssp_driver = {
+	.probe = ssp_probe,
+	.remove = ssp_remove,
+	.driver = {
+		.pm = pm_sleep_ptr(&ssp_pm_ops),
+		.of_match_table = ssp_of_match,
+		.name = "sensorhub"
+	},
+};
+
+module_spi_driver(ssp_driver);
+
+MODULE_DESCRIPTION("ssp sensorhub driver");
+MODULE_AUTHOR("Samsung Electronics");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/ssp_sensors/ssp_iio.c b/drivers/iio/common/ssp_sensors/ssp_iio.c
new file mode 100644
index 000000000..88b8b56bf
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/ssp_iio.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ */
+
+#include <linux/iio/common/ssp_sensors.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "ssp_iio_sensor.h"
+
+/**
+ * ssp_common_buffer_postenable() - generic postenable callback for ssp buffer
+ *
+ * @indio_dev:		iio device
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_common_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ssp_sensor_data *spd = iio_priv(indio_dev);
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	/* the allocation is made in post because scan size is known in this
+	 * moment
+	 * */
+	spd->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL | GFP_DMA);
+	if (!spd->buffer)
+		return -ENOMEM;
+
+	return ssp_enable_sensor(data, spd->type,
+				 ssp_get_sensor_delay(data, spd->type));
+}
+EXPORT_SYMBOL_NS(ssp_common_buffer_postenable, IIO_SSP_SENSORS);
+
+/**
+ * ssp_common_buffer_postdisable() - generic postdisable callback for ssp buffer
+ *
+ * @indio_dev:		iio device
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_common_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct ssp_sensor_data *spd = iio_priv(indio_dev);
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	ret = ssp_disable_sensor(data, spd->type);
+	if (ret < 0)
+		return ret;
+
+	kfree(spd->buffer);
+
+	return ret;
+}
+EXPORT_SYMBOL_NS(ssp_common_buffer_postdisable, IIO_SSP_SENSORS);
+
+/**
+ * ssp_common_process_data() - Common process data callback for ssp sensors
+ *
+ * @indio_dev:		iio device
+ * @buf:		source buffer
+ * @len:		sensor data length
+ * @timestamp:		system timestamp
+ *
+ * Returns 0 or negative value in case of error
+ */
+int ssp_common_process_data(struct iio_dev *indio_dev, void *buf,
+			    unsigned int len, int64_t timestamp)
+{
+	__le32 time;
+	int64_t calculated_time = 0;
+	struct ssp_sensor_data *spd = iio_priv(indio_dev);
+
+	if (indio_dev->scan_bytes == 0)
+		return 0;
+
+	/*
+	 * it always sends full set of samples, remember about available masks
+	 */
+	memcpy(spd->buffer, buf, len);
+
+	if (indio_dev->scan_timestamp) {
+		memcpy(&time, &((char *)buf)[len], SSP_TIME_SIZE);
+		calculated_time =
+			timestamp + (int64_t)le32_to_cpu(time) * 1000000;
+	}
+
+	return iio_push_to_buffers_with_timestamp(indio_dev, spd->buffer,
+						  calculated_time);
+}
+EXPORT_SYMBOL_NS(ssp_common_process_data, IIO_SSP_SENSORS);
+
+MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
+MODULE_DESCRIPTION("Samsung sensorhub commons");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_SSP_SENSORS);
diff --git a/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h b/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
new file mode 100644
index 000000000..4528ab55e
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SSP_IIO_SENSOR_H__
+#define __SSP_IIO_SENSOR_H__
+
+#define SSP_CHANNEL_AG(_type, _mod, _index) \
+{ \
+		.type = _type,\
+		.modified = 1,\
+		.channel2 = _mod,\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.scan_index = _index,\
+		.scan_type = {\
+			.sign = 's',\
+			.realbits = 16,\
+			.storagebits = 16,\
+			.shift = 0,\
+			.endianness = IIO_LE,\
+		},\
+}
+
+/* It is defined here as it is a mixed timestamp */
+#define SSP_CHAN_TIMESTAMP(_si) {					\
+	.type = IIO_TIMESTAMP,						\
+	.channel = -1,							\
+	.scan_index = _si,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 64,						\
+		.storagebits = 64,					\
+		},							\
+}
+
+#define SSP_MS_PER_S			1000
+#define SSP_INVERTED_SCALING_FACTOR	1000000U
+
+#define SSP_FACTOR_WITH_MS \
+	(SSP_INVERTED_SCALING_FACTOR * SSP_MS_PER_S)
+
+int ssp_common_buffer_postenable(struct iio_dev *indio_dev);
+
+int ssp_common_buffer_postdisable(struct iio_dev *indio_dev);
+
+int ssp_common_process_data(struct iio_dev *indio_dev, void *buf,
+			    unsigned int len, int64_t timestamp);
+
+/* Converts time in ms to frequency */
+static inline void ssp_convert_to_freq(u32 time, int *integer_part,
+				       int *fractional)
+{
+	if (time == 0) {
+		*fractional = 0;
+		*integer_part = 0;
+		return;
+	}
+
+	*integer_part = SSP_FACTOR_WITH_MS / time;
+	*fractional = *integer_part % SSP_INVERTED_SCALING_FACTOR;
+	*integer_part = *integer_part / SSP_INVERTED_SCALING_FACTOR;
+}
+
+/* Converts frequency to time in ms */
+static inline int ssp_convert_to_time(int integer_part, int fractional)
+{
+	u64 value;
+
+	value = (u64)integer_part * SSP_INVERTED_SCALING_FACTOR + fractional;
+	if (value == 0)
+		return 0;
+
+	return div64_u64((u64)SSP_FACTOR_WITH_MS, value);
+}
+#endif /* __SSP_IIO_SENSOR_H__ */
diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
new file mode 100644
index 000000000..f32b04b63
--- /dev/null
+++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ */
+
+#include "ssp.h"
+
+#define SSP_DEV (&data->spi->dev)
+#define SSP_GET_MESSAGE_TYPE(data) (data & (3 << SSP_RW))
+
+/*
+ * SSP -> AP Instruction
+ * They tell what packet type can be expected. In the future there will
+ * be less of them. BYPASS means common sensor packets with accel, gyro,
+ * hrm etc. data. LIBRARY and META are mock-up's for now.
+ */
+#define SSP_MSG2AP_INST_BYPASS_DATA		0x37
+#define SSP_MSG2AP_INST_LIBRARY_DATA		0x01
+#define SSP_MSG2AP_INST_DEBUG_DATA		0x03
+#define SSP_MSG2AP_INST_BIG_DATA		0x04
+#define SSP_MSG2AP_INST_META_DATA		0x05
+#define SSP_MSG2AP_INST_TIME_SYNC		0x06
+#define SSP_MSG2AP_INST_RESET			0x07
+
+#define SSP_UNIMPLEMENTED -1
+
+struct ssp_msg_header {
+	u8 cmd;
+	__le16 length;
+	__le16 options;
+	__le32 data;
+} __attribute__((__packed__));
+
+struct ssp_msg {
+	u16 length;
+	u16 options;
+	struct list_head list;
+	struct completion *done;
+	struct ssp_msg_header *h;
+	char *buffer;
+};
+
+static const int ssp_offset_map[SSP_SENSOR_MAX] = {
+	[SSP_ACCELEROMETER_SENSOR] =		SSP_ACCELEROMETER_SIZE +
+						SSP_TIME_SIZE,
+	[SSP_GYROSCOPE_SENSOR] =		SSP_GYROSCOPE_SIZE +
+						SSP_TIME_SIZE,
+	[SSP_GEOMAGNETIC_UNCALIB_SENSOR] =	SSP_UNIMPLEMENTED,
+	[SSP_GEOMAGNETIC_RAW] =			SSP_UNIMPLEMENTED,
+	[SSP_GEOMAGNETIC_SENSOR] =		SSP_UNIMPLEMENTED,
+	[SSP_PRESSURE_SENSOR] =			SSP_UNIMPLEMENTED,
+	[SSP_GESTURE_SENSOR] =			SSP_UNIMPLEMENTED,
+	[SSP_PROXIMITY_SENSOR] =		SSP_UNIMPLEMENTED,
+	[SSP_TEMPERATURE_HUMIDITY_SENSOR] =	SSP_UNIMPLEMENTED,
+	[SSP_LIGHT_SENSOR] =			SSP_UNIMPLEMENTED,
+	[SSP_PROXIMITY_RAW] =			SSP_UNIMPLEMENTED,
+	[SSP_ORIENTATION_SENSOR] =		SSP_UNIMPLEMENTED,
+	[SSP_STEP_DETECTOR] =			SSP_UNIMPLEMENTED,
+	[SSP_SIG_MOTION_SENSOR] =		SSP_UNIMPLEMENTED,
+	[SSP_GYRO_UNCALIB_SENSOR] =		SSP_UNIMPLEMENTED,
+	[SSP_GAME_ROTATION_VECTOR] =		SSP_UNIMPLEMENTED,
+	[SSP_ROTATION_VECTOR] =			SSP_UNIMPLEMENTED,
+	[SSP_STEP_COUNTER] =			SSP_UNIMPLEMENTED,
+	[SSP_BIO_HRM_RAW] =			SSP_BIO_HRM_RAW_SIZE +
+						SSP_TIME_SIZE,
+	[SSP_BIO_HRM_RAW_FAC] =			SSP_BIO_HRM_RAW_FAC_SIZE +
+						SSP_TIME_SIZE,
+	[SSP_BIO_HRM_LIB] =			SSP_BIO_HRM_LIB_SIZE +
+						SSP_TIME_SIZE,
+};
+
+#define SSP_HEADER_SIZE		(sizeof(struct ssp_msg_header))
+#define SSP_HEADER_SIZE_ALIGNED	(ALIGN(SSP_HEADER_SIZE, 4))
+
+static struct ssp_msg *ssp_create_msg(u8 cmd, u16 len, u16 opt, u32 data)
+{
+	struct ssp_msg_header h;
+	struct ssp_msg *msg;
+
+	msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+	if (!msg)
+		return NULL;
+
+	h.cmd = cmd;
+	h.length = cpu_to_le16(len);
+	h.options = cpu_to_le16(opt);
+	h.data = cpu_to_le32(data);
+
+	msg->buffer = kzalloc(SSP_HEADER_SIZE_ALIGNED + len,
+			      GFP_KERNEL | GFP_DMA);
+	if (!msg->buffer) {
+		kfree(msg);
+		return NULL;
+	}
+
+	msg->length = len;
+	msg->options = opt;
+
+	memcpy(msg->buffer, &h, SSP_HEADER_SIZE);
+
+	return msg;
+}
+
+/*
+ * It is a bit heavy to do it this way but often the function is used to compose
+ * the message from smaller chunks which are placed on the stack.  Often the
+ * chunks are small so memcpy should be optimalized.
+ */
+static inline void ssp_fill_buffer(struct ssp_msg *m, unsigned int offset,
+				   const void *src, unsigned int len)
+{
+	memcpy(&m->buffer[SSP_HEADER_SIZE_ALIGNED + offset], src, len);
+}
+
+static inline void ssp_get_buffer(struct ssp_msg *m, unsigned int offset,
+				  void *dest, unsigned int len)
+{
+	memcpy(dest, &m->buffer[SSP_HEADER_SIZE_ALIGNED + offset],  len);
+}
+
+#define SSP_GET_BUFFER_AT_INDEX(m, index) \
+	(m->buffer[SSP_HEADER_SIZE_ALIGNED + index])
+#define SSP_SET_BUFFER_AT_INDEX(m, index, val) \
+	(m->buffer[SSP_HEADER_SIZE_ALIGNED + index] = val)
+
+static void ssp_clean_msg(struct ssp_msg *m)
+{
+	kfree(m->buffer);
+	kfree(m);
+}
+
+static int ssp_print_mcu_debug(char *data_frame, int *data_index,
+			       int received_len)
+{
+	int length = data_frame[(*data_index)++];
+
+	if (length > received_len - *data_index || length <= 0) {
+		ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n",
+			length, received_len);
+		return -EPROTO;
+	}
+
+	ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]);
+
+	*data_index += length;
+
+	return 0;
+}
+
+/*
+ * It was designed that way - additional lines to some kind of handshake,
+ * please do not ask why - only the firmware guy can know it.
+ */
+static int ssp_check_lines(struct ssp_data *data, bool state)
+{
+	int delay_cnt = 0;
+
+	gpiod_set_value_cansleep(data->ap_mcu_gpiod, state);
+
+	while (gpiod_get_value_cansleep(data->mcu_ap_gpiod) != state) {
+		usleep_range(3000, 3500);
+
+		if (data->shut_down || delay_cnt++ > 500) {
+			dev_err(SSP_DEV, "%s:timeout, hw ack wait fail %d\n",
+				__func__, state);
+
+			if (!state)
+				gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
+
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
+			   struct completion *done, int timeout)
+{
+	int status;
+	/*
+	 * check if this is a short one way message or the whole transfer has
+	 * second part after an interrupt
+	 */
+	const bool use_no_irq = msg->length == 0;
+
+	if (data->shut_down)
+		return -EPERM;
+
+	msg->done = done;
+
+	mutex_lock(&data->comm_lock);
+
+	status = ssp_check_lines(data, false);
+	if (status < 0)
+		goto _error_locked;
+
+	status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
+	if (status < 0) {
+		gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
+		dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
+		goto _error_locked;
+	}
+
+	if (!use_no_irq) {
+		mutex_lock(&data->pending_lock);
+		list_add_tail(&msg->list, &data->pending_list);
+		mutex_unlock(&data->pending_lock);
+	}
+
+	status = ssp_check_lines(data, true);
+	if (status < 0) {
+		if (!use_no_irq) {
+			mutex_lock(&data->pending_lock);
+			list_del(&msg->list);
+			mutex_unlock(&data->pending_lock);
+		}
+		goto _error_locked;
+	}
+
+	mutex_unlock(&data->comm_lock);
+
+	if (!use_no_irq && done)
+		if (wait_for_completion_timeout(done,
+						msecs_to_jiffies(timeout)) ==
+		    0) {
+			mutex_lock(&data->pending_lock);
+			list_del(&msg->list);
+			mutex_unlock(&data->pending_lock);
+
+			data->timeout_cnt++;
+			return -ETIMEDOUT;
+		}
+
+	return 0;
+
+_error_locked:
+	mutex_unlock(&data->comm_lock);
+	data->timeout_cnt++;
+	return status;
+}
+
+static inline int ssp_spi_sync_command(struct ssp_data *data,
+				       struct ssp_msg *msg)
+{
+	return ssp_do_transfer(data, msg, NULL, 0);
+}
+
+static int ssp_spi_sync(struct ssp_data *data, struct ssp_msg *msg,
+			int timeout)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	if (WARN_ON(!msg->length))
+		return -EPERM;
+
+	return ssp_do_transfer(data, msg, &done, timeout);
+}
+
+static int ssp_handle_big_data(struct ssp_data *data, char *dataframe, int *idx)
+{
+	/* mock-up, it will be changed with adding another sensor types */
+	*idx += 8;
+	return 0;
+}
+
+static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len)
+{
+	int idx, sd;
+	struct ssp_sensor_data *spd;
+	struct iio_dev **indio_devs = data->sensor_devs;
+
+	for (idx = 0; idx < len;) {
+		switch (dataframe[idx++]) {
+		case SSP_MSG2AP_INST_BYPASS_DATA:
+			if (idx >= len)
+				return -EPROTO;
+			sd = dataframe[idx++];
+			if (sd < 0 || sd >= SSP_SENSOR_MAX) {
+				dev_err(SSP_DEV,
+					"Mcu data frame1 error %d\n", sd);
+				return -EPROTO;
+			}
+
+			if (indio_devs[sd]) {
+				spd = iio_priv(indio_devs[sd]);
+				if (spd->process_data) {
+					if (idx >= len)
+						return -EPROTO;
+					spd->process_data(indio_devs[sd],
+							  &dataframe[idx],
+							  data->timestamp);
+				}
+			} else {
+				dev_err(SSP_DEV, "no client for frame\n");
+			}
+
+			idx += ssp_offset_map[sd];
+			break;
+		case SSP_MSG2AP_INST_DEBUG_DATA:
+			if (idx >= len)
+				return -EPROTO;
+			sd = ssp_print_mcu_debug(dataframe, &idx, len);
+			if (sd) {
+				dev_err(SSP_DEV,
+					"Mcu data frame3 error %d\n", sd);
+				return sd;
+			}
+			break;
+		case SSP_MSG2AP_INST_LIBRARY_DATA:
+			idx += len;
+			break;
+		case SSP_MSG2AP_INST_BIG_DATA:
+			ssp_handle_big_data(data, dataframe, &idx);
+			break;
+		case SSP_MSG2AP_INST_TIME_SYNC:
+			data->time_syncing = true;
+			break;
+		case SSP_MSG2AP_INST_RESET:
+			ssp_queue_ssp_refresh_task(data, 0);
+			break;
+		}
+	}
+
+	if (data->time_syncing)
+		data->timestamp = ktime_get_real_ns();
+
+	return 0;
+}
+
+/* threaded irq */
+int ssp_irq_msg(struct ssp_data *data)
+{
+	char *buffer;
+	u8 msg_type;
+	int ret;
+	u16 length, msg_options;
+	struct ssp_msg *msg = NULL, *iter, *n;
+
+	ret = spi_read(data->spi, data->header_buffer, SSP_HEADER_BUFFER_SIZE);
+	if (ret < 0) {
+		dev_err(SSP_DEV, "header read fail\n");
+		return ret;
+	}
+
+	length = le16_to_cpu(data->header_buffer[1]);
+	msg_options = le16_to_cpu(data->header_buffer[0]);
+
+	if (length == 0) {
+		dev_err(SSP_DEV, "length received from mcu is 0\n");
+		return -EINVAL;
+	}
+
+	msg_type = SSP_GET_MESSAGE_TYPE(msg_options);
+
+	switch (msg_type) {
+	case SSP_AP2HUB_READ:
+	case SSP_AP2HUB_WRITE:
+		/*
+		 * this is a small list, a few elements - the packets can be
+		 * received with no order
+		 */
+		mutex_lock(&data->pending_lock);
+		list_for_each_entry_safe(iter, n, &data->pending_list, list) {
+			if (iter->options == msg_options) {
+				list_del(&iter->list);
+				msg = iter;
+				break;
+			}
+		}
+
+		if (!msg) {
+			/*
+			 * here can be implemented dead messages handling
+			 * but the slave should not send such ones - it is to
+			 * check but let's handle this
+			 */
+			buffer = kmalloc(length, GFP_KERNEL | GFP_DMA);
+			if (!buffer) {
+				ret = -ENOMEM;
+				goto _unlock;
+			}
+
+			/* got dead packet so it is always an error */
+			ret = spi_read(data->spi, buffer, length);
+			if (ret >= 0)
+				ret = -EPROTO;
+
+			kfree(buffer);
+
+			dev_err(SSP_DEV, "No match error %x\n",
+				msg_options);
+
+			goto _unlock;
+		}
+
+		if (msg_type == SSP_AP2HUB_READ)
+			ret = spi_read(data->spi,
+				       &msg->buffer[SSP_HEADER_SIZE_ALIGNED],
+				       msg->length);
+
+		if (msg_type == SSP_AP2HUB_WRITE) {
+			ret = spi_write(data->spi,
+					&msg->buffer[SSP_HEADER_SIZE_ALIGNED],
+					msg->length);
+			if (msg_options & SSP_AP2HUB_RETURN) {
+				msg->options =
+					SSP_AP2HUB_READ | SSP_AP2HUB_RETURN;
+				msg->length = 1;
+
+				list_add_tail(&msg->list, &data->pending_list);
+				goto _unlock;
+			}
+		}
+
+		if (msg->done)
+			if (!completion_done(msg->done))
+				complete(msg->done);
+_unlock:
+		mutex_unlock(&data->pending_lock);
+		break;
+	case SSP_HUB2AP_WRITE:
+		buffer = kzalloc(length, GFP_KERNEL | GFP_DMA);
+		if (!buffer)
+			return -ENOMEM;
+
+		ret = spi_read(data->spi, buffer, length);
+		if (ret < 0) {
+			dev_err(SSP_DEV, "spi read fail\n");
+			kfree(buffer);
+			break;
+		}
+
+		ret = ssp_parse_dataframe(data, buffer, length);
+
+		kfree(buffer);
+		break;
+
+	default:
+		dev_err(SSP_DEV, "unknown msg type\n");
+		return -EPROTO;
+	}
+
+	return ret;
+}
+
+void ssp_clean_pending_list(struct ssp_data *data)
+{
+	struct ssp_msg *msg, *n;
+
+	mutex_lock(&data->pending_lock);
+	list_for_each_entry_safe(msg, n, &data->pending_list, list) {
+		list_del(&msg->list);
+
+		if (msg->done)
+			if (!completion_done(msg->done))
+				complete(msg->done);
+	}
+	mutex_unlock(&data->pending_lock);
+}
+
+int ssp_command(struct ssp_data *data, char command, int arg)
+{
+	int ret;
+	struct ssp_msg *msg;
+
+	msg = ssp_create_msg(command, 0, SSP_AP2HUB_WRITE, arg);
+	if (!msg)
+		return -ENOMEM;
+
+	ssp_dbg("%s - command 0x%x %d\n", __func__, command, arg);
+
+	ret = ssp_spi_sync_command(data, msg);
+	ssp_clean_msg(msg);
+
+	return ret;
+}
+
+int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
+			 u8 *send_buf, u8 length)
+{
+	int ret;
+	struct ssp_msg *msg;
+
+	if (data->fw_dl_state == SSP_FW_DL_STATE_DOWNLOADING) {
+		dev_err(SSP_DEV, "%s - Skip Inst! DL state = %d\n",
+			__func__, data->fw_dl_state);
+		return -EBUSY;
+	} else if (!(data->available_sensors & BIT(sensor_type)) &&
+		   (inst <= SSP_MSG2SSP_INST_CHANGE_DELAY)) {
+		dev_err(SSP_DEV, "%s - Bypass Inst Skip! - %u\n",
+			__func__, sensor_type);
+		return -EIO; /* just fail */
+	}
+
+	msg = ssp_create_msg(inst, length + 2, SSP_AP2HUB_WRITE, 0);
+	if (!msg)
+		return -ENOMEM;
+
+	ssp_fill_buffer(msg, 0, &sensor_type, 1);
+	ssp_fill_buffer(msg, 1, send_buf, length);
+
+	ssp_dbg("%s - Inst = 0x%x, Sensor Type = 0x%x, data = %u\n",
+		__func__, inst, sensor_type, send_buf[1]);
+
+	ret = ssp_spi_sync(data, msg, 1000);
+	ssp_clean_msg(msg);
+
+	return ret;
+}
+
+int ssp_get_chipid(struct ssp_data *data)
+{
+	int ret;
+	char buffer;
+	struct ssp_msg *msg;
+
+	msg = ssp_create_msg(SSP_MSG2SSP_AP_WHOAMI, 1, SSP_AP2HUB_READ, 0);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = ssp_spi_sync(data, msg, 1000);
+
+	buffer = SSP_GET_BUFFER_AT_INDEX(msg, 0);
+
+	ssp_clean_msg(msg);
+
+	return ret < 0 ? ret : buffer;
+}
+
+int ssp_set_magnetic_matrix(struct ssp_data *data)
+{
+	int ret;
+	struct ssp_msg *msg;
+
+	msg = ssp_create_msg(SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX,
+			     data->sensorhub_info->mag_length, SSP_AP2HUB_WRITE,
+			     0);
+	if (!msg)
+		return -ENOMEM;
+
+	ssp_fill_buffer(msg, 0, data->sensorhub_info->mag_table,
+			data->sensorhub_info->mag_length);
+
+	ret = ssp_spi_sync(data, msg, 1000);
+	ssp_clean_msg(msg);
+
+	return ret;
+}
+
+unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data)
+{
+	int ret;
+	__le32 result;
+	u32 cpu_result = 0;
+
+	struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_SENSOR_SCANNING, 4,
+					     SSP_AP2HUB_READ, 0);
+	if (!msg)
+		return 0;
+
+	ret = ssp_spi_sync(data, msg, 1000);
+	if (ret < 0) {
+		dev_err(SSP_DEV, "%s - spi read fail %d\n", __func__, ret);
+		goto _exit;
+	}
+
+	ssp_get_buffer(msg, 0, &result, 4);
+	cpu_result = le32_to_cpu(result);
+
+	dev_info(SSP_DEV, "%s state: 0x%08x\n", __func__, cpu_result);
+
+_exit:
+	ssp_clean_msg(msg);
+	return cpu_result;
+}
+
+unsigned int ssp_get_firmware_rev(struct ssp_data *data)
+{
+	int ret;
+	__le32 result;
+
+	struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_FIRMWARE_REV, 4,
+					     SSP_AP2HUB_READ, 0);
+	if (!msg)
+		return SSP_INVALID_REVISION;
+
+	ret = ssp_spi_sync(data, msg, 1000);
+	if (ret < 0) {
+		dev_err(SSP_DEV, "%s - transfer fail %d\n", __func__, ret);
+		ret = SSP_INVALID_REVISION;
+		goto _exit;
+	}
+
+	ssp_get_buffer(msg, 0, &result, 4);
+	ret = le32_to_cpu(result);
+
+_exit:
+	ssp_clean_msg(msg);
+	return ret;
+}
diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
new file mode 100644
index 000000000..eda8f347f
--- /dev/null
+++ b/drivers/iio/common/st_sensors/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# STMicroelectronics sensors common library
+#
+
+config IIO_ST_SENSORS_I2C
+	tristate
+	select REGMAP_I2C
+
+config IIO_ST_SENSORS_SPI
+	tristate
+	select REGMAP_SPI
+
+config IIO_ST_SENSORS_CORE
+	tristate
diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile
new file mode 100644
index 000000000..f7fb3b79b
--- /dev/null
+++ b/drivers/iio/common/st_sensors/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the STMicroelectronics sensor common modules.
+#
+
+obj-$(CONFIG_IIO_ST_SENSORS_I2C) += st_sensors_i2c.o
+obj-$(CONFIG_IIO_ST_SENSORS_SPI) += st_sensors_spi.o
+obj-$(CONFIG_IIO_ST_SENSORS_CORE) += st_sensors.o
+st_sensors-y := st_sensors_core.o
+st_sensors-$(CONFIG_IIO_BUFFER) += st_sensors_buffer.o
+st_sensors-$(CONFIG_IIO_TRIGGER) += st_sensors_trigger.o
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
new file mode 100644
index 000000000..e2f108ca9
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics sensors buffer library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/interrupt.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/irqreturn.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int num_data_channels = sdata->num_data_channels;
+	int i;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask, num_data_channels) {
+		const struct iio_chan_spec *channel = &indio_dev->channels[i];
+		unsigned int bytes_to_read =
+			DIV_ROUND_UP(channel->scan_type.realbits +
+				     channel->scan_type.shift, 8);
+		unsigned int storage_bytes =
+			channel->scan_type.storagebits >> 3;
+
+		buf = PTR_ALIGN(buf, storage_bytes);
+		if (regmap_bulk_read(sdata->regmap, channel->address,
+				     buf, bytes_to_read) < 0)
+			return -EIO;
+
+		/* Advance the buffer pointer */
+		buf += storage_bytes;
+	}
+
+	return 0;
+}
+
+irqreturn_t st_sensors_trigger_handler(int irq, void *p)
+{
+	int len;
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	s64 timestamp;
+
+	/*
+	 * If we do timestamping here, do it before reading the values, because
+	 * once we've read the values, new interrupts can occur (when using
+	 * the hardware trigger) and the hw_timestamp may get updated.
+	 * By storing it in a local variable first, we are safe.
+	 */
+	if (iio_trigger_using_own(indio_dev))
+		timestamp = sdata->hw_timestamp;
+	else
+		timestamp = iio_get_time_ns(indio_dev);
+
+	len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data);
+	if (len < 0)
+		goto st_sensors_get_buffer_element_error;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data,
+					   timestamp);
+
+st_sensors_get_buffer_element_error:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_NS(st_sensors_trigger_handler, IIO_ST_SENSORS);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
new file mode 100644
index 000000000..c77d7bdcc
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics sensors core library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+#include <linux/iio/common/st_sensors.h>
+
+#include "st_sensors_core.h"
+
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+				    u8 reg_addr, u8 mask, u8 data)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	return regmap_update_bits(sdata->regmap,
+				  reg_addr, mask, data << __ffs(mask));
+}
+
+int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
+				  unsigned reg, unsigned writeval,
+				  unsigned *readval)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int err;
+
+	if (!readval)
+		return regmap_write(sdata->regmap, reg, writeval);
+
+	err = regmap_read(sdata->regmap, reg, readval);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_debugfs_reg_access, IIO_ST_SENSORS);
+
+static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
+			unsigned int odr, struct st_sensor_odr_avl *odr_out)
+{
+	int i, ret = -EINVAL;
+
+	for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
+		if (sensor_settings->odr.odr_avl[i].hz == 0)
+			goto st_sensors_match_odr_error;
+
+		if (sensor_settings->odr.odr_avl[i].hz == odr) {
+			odr_out->hz = sensor_settings->odr.odr_avl[i].hz;
+			odr_out->value = sensor_settings->odr.odr_avl[i].value;
+			ret = 0;
+			break;
+		}
+	}
+
+st_sensors_match_odr_error:
+	return ret;
+}
+
+int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
+{
+	int err = 0;
+	struct st_sensor_odr_avl odr_out = {0, 0};
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	mutex_lock(&sdata->odr_lock);
+
+	if (!sdata->sensor_settings->odr.mask)
+		goto unlock_mutex;
+
+	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
+	if (err < 0)
+		goto unlock_mutex;
+
+	if ((sdata->sensor_settings->odr.addr ==
+					sdata->sensor_settings->pw.addr) &&
+				(sdata->sensor_settings->odr.mask ==
+					sdata->sensor_settings->pw.mask)) {
+		if (sdata->enabled == true) {
+			err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->odr.addr,
+				sdata->sensor_settings->odr.mask,
+				odr_out.value);
+		} else {
+			err = 0;
+		}
+	} else {
+		err = st_sensors_write_data_with_mask(indio_dev,
+			sdata->sensor_settings->odr.addr,
+			sdata->sensor_settings->odr.mask,
+			odr_out.value);
+	}
+	if (err >= 0)
+		sdata->odr = odr_out.hz;
+
+unlock_mutex:
+	mutex_unlock(&sdata->odr_lock);
+
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_set_odr, IIO_ST_SENSORS);
+
+static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
+					unsigned int fs, int *index_fs_avl)
+{
+	int i, ret = -EINVAL;
+
+	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+		if (sensor_settings->fs.fs_avl[i].num == 0)
+			return ret;
+
+		if (sensor_settings->fs.fs_avl[i].num == fs) {
+			*index_fs_avl = i;
+			ret = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
+{
+	int err, i = 0;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	if (sdata->sensor_settings->fs.addr == 0)
+		return 0;
+
+	err = st_sensors_match_fs(sdata->sensor_settings, fs, &i);
+	if (err < 0)
+		goto st_accel_set_fullscale_error;
+
+	err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->fs.addr,
+				sdata->sensor_settings->fs.mask,
+				sdata->sensor_settings->fs.fs_avl[i].value);
+	if (err < 0)
+		goto st_accel_set_fullscale_error;
+
+	sdata->current_fullscale = &sdata->sensor_settings->fs.fs_avl[i];
+	return err;
+
+st_accel_set_fullscale_error:
+	dev_err(&indio_dev->dev, "failed to set new fullscale.\n");
+	return err;
+}
+
+int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+	u8 tmp_value;
+	int err = -EINVAL;
+	bool found = false;
+	struct st_sensor_odr_avl odr_out = {0, 0};
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	if (enable) {
+		tmp_value = sdata->sensor_settings->pw.value_on;
+		if ((sdata->sensor_settings->odr.addr ==
+					sdata->sensor_settings->pw.addr) &&
+				(sdata->sensor_settings->odr.mask ==
+					sdata->sensor_settings->pw.mask)) {
+			err = st_sensors_match_odr(sdata->sensor_settings,
+							sdata->odr, &odr_out);
+			if (err < 0)
+				goto set_enable_error;
+			tmp_value = odr_out.value;
+			found = true;
+		}
+		err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->pw.addr,
+				sdata->sensor_settings->pw.mask, tmp_value);
+		if (err < 0)
+			goto set_enable_error;
+
+		sdata->enabled = true;
+
+		if (found)
+			sdata->odr = odr_out.hz;
+	} else {
+		err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->pw.addr,
+				sdata->sensor_settings->pw.mask,
+				sdata->sensor_settings->pw.value_off);
+		if (err < 0)
+			goto set_enable_error;
+
+		sdata->enabled = false;
+	}
+
+set_enable_error:
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_set_enable, IIO_ST_SENSORS);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int err = 0;
+
+	if (sdata->sensor_settings->enable_axis.addr)
+		err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->enable_axis.addr,
+				sdata->sensor_settings->enable_axis.mask,
+				axis_enable);
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_set_axis_enable, IIO_ST_SENSORS);
+
+
+int st_sensors_power_enable(struct iio_dev *indio_dev)
+{
+	static const char * const regulator_names[] = { "vdd", "vddio" };
+	struct device *parent = indio_dev->dev.parent;
+	int err;
+
+	/* Regulators not mandatory, but if requested we should enable them. */
+	err = devm_regulator_bulk_get_enable(parent,
+					     ARRAY_SIZE(regulator_names),
+					     regulator_names);
+	if (err)
+		return dev_err_probe(&indio_dev->dev, err,
+				     "unable to enable supplies\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_power_enable, IIO_ST_SENSORS);
+
+static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
+					struct st_sensors_platform_data *pdata)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	/* Sensor does not support interrupts */
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
+		if (pdata->drdy_int_pin)
+			dev_info(&indio_dev->dev,
+				 "DRDY on pin INT%d specified, but sensor does not support interrupts\n",
+				 pdata->drdy_int_pin);
+		return 0;
+	}
+
+	switch (pdata->drdy_int_pin) {
+	case 1:
+		if (!sdata->sensor_settings->drdy_irq.int1.mask) {
+			dev_err(&indio_dev->dev,
+					"DRDY on INT1 not available.\n");
+			return -EINVAL;
+		}
+		sdata->drdy_int_pin = 1;
+		break;
+	case 2:
+		if (!sdata->sensor_settings->drdy_irq.int2.mask) {
+			dev_err(&indio_dev->dev,
+					"DRDY on INT2 not available.\n");
+			return -EINVAL;
+		}
+		sdata->drdy_int_pin = 2;
+		break;
+	default:
+		dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n");
+		return -EINVAL;
+	}
+
+	if (pdata->open_drain) {
+		if (!sdata->sensor_settings->drdy_irq.int1.addr_od &&
+		    !sdata->sensor_settings->drdy_irq.int2.addr_od)
+			dev_err(&indio_dev->dev,
+				"open drain requested but unsupported.\n");
+		else
+			sdata->int_pin_open_drain = true;
+	}
+
+	return 0;
+}
+
+static struct st_sensors_platform_data *st_sensors_dev_probe(struct device *dev,
+		struct st_sensors_platform_data *defdata)
+{
+	struct st_sensors_platform_data *pdata;
+	u32 val;
+
+	if (!dev_fwnode(dev))
+		return NULL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+	if (!device_property_read_u32(dev, "st,drdy-int-pin", &val) && (val <= 2))
+		pdata->drdy_int_pin = (u8) val;
+	else
+		pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 0;
+
+	pdata->open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+	return pdata;
+}
+
+/**
+ * st_sensors_dev_name_probe() - device probe for ST sensor name
+ * @dev: driver model representation of the device.
+ * @name: device name buffer reference.
+ * @len: device name buffer length.
+ *
+ * In effect this function matches an ID to an internal kernel
+ * name for a certain sensor device, so that the rest of the autodetection can
+ * rely on that name from this point on. I2C/SPI devices will be renamed
+ * to match the internal kernel convention.
+ */
+void st_sensors_dev_name_probe(struct device *dev, char *name, int len)
+{
+	const void *match;
+
+	match = device_get_match_data(dev);
+	if (!match)
+		return;
+
+	/* The name from the match takes precedence if present */
+	strscpy(name, match, len);
+}
+EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, IIO_ST_SENSORS);
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+					struct st_sensors_platform_data *pdata)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *of_pdata;
+	int err = 0;
+
+	mutex_init(&sdata->odr_lock);
+
+	/* If OF/DT pdata exists, it will take precedence of anything else */
+	of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata);
+	if (IS_ERR(of_pdata))
+		return PTR_ERR(of_pdata);
+	if (of_pdata)
+		pdata = of_pdata;
+
+	if (pdata) {
+		err = st_sensors_set_drdy_int_pin(indio_dev, pdata);
+		if (err < 0)
+			return err;
+	}
+
+	err = st_sensors_set_enable(indio_dev, false);
+	if (err < 0)
+		return err;
+
+	/* Disable DRDY, this might be still be enabled after reboot. */
+	err = st_sensors_set_dataready_irq(indio_dev, false);
+	if (err < 0)
+		return err;
+
+	if (sdata->current_fullscale) {
+		err = st_sensors_set_fullscale(indio_dev,
+						sdata->current_fullscale->num);
+		if (err < 0)
+			return err;
+	} else
+		dev_info(&indio_dev->dev, "Full-scale not possible\n");
+
+	err = st_sensors_set_odr(indio_dev, sdata->odr);
+	if (err < 0)
+		return err;
+
+	/* set BDU */
+	if (sdata->sensor_settings->bdu.addr) {
+		err = st_sensors_write_data_with_mask(indio_dev,
+					sdata->sensor_settings->bdu.addr,
+					sdata->sensor_settings->bdu.mask, true);
+		if (err < 0)
+			return err;
+	}
+
+	/* set DAS */
+	if (sdata->sensor_settings->das.addr) {
+		err = st_sensors_write_data_with_mask(indio_dev,
+					sdata->sensor_settings->das.addr,
+					sdata->sensor_settings->das.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (sdata->int_pin_open_drain) {
+		u8 addr, mask;
+
+		if (sdata->drdy_int_pin == 1) {
+			addr = sdata->sensor_settings->drdy_irq.int1.addr_od;
+			mask = sdata->sensor_settings->drdy_irq.int1.mask_od;
+		} else {
+			addr = sdata->sensor_settings->drdy_irq.int2.addr_od;
+			mask = sdata->sensor_settings->drdy_irq.int2.mask_od;
+		}
+
+		dev_info(&indio_dev->dev,
+			 "set interrupt line to open drain mode on pin %d\n",
+			 sdata->drdy_int_pin);
+		err = st_sensors_write_data_with_mask(indio_dev, addr,
+						      mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_init_sensor, IIO_ST_SENSORS);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
+{
+	int err;
+	u8 drdy_addr, drdy_mask;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
+		/*
+		 * there are some devices (e.g. LIS3MDL) where drdy line is
+		 * routed to a given pin and it is not possible to select a
+		 * different one. Take into account irq status register
+		 * to understand if irq trigger can be properly supported
+		 */
+		if (sdata->sensor_settings->drdy_irq.stat_drdy.addr)
+			sdata->hw_irq_trigger = enable;
+		return 0;
+	}
+
+	/* Enable/Disable the interrupt generator 1. */
+	if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) {
+		err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->drdy_irq.ig1.en_addr,
+				sdata->sensor_settings->drdy_irq.ig1.en_mask,
+				(int)enable);
+		if (err < 0)
+			goto st_accel_set_dataready_irq_error;
+	}
+
+	if (sdata->drdy_int_pin == 1) {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int1.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int1.mask;
+	} else {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int2.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int2.mask;
+	}
+
+	/* Flag to the poll function that the hardware trigger is in use */
+	sdata->hw_irq_trigger = enable;
+
+	/* Enable/Disable the interrupt generator for data ready. */
+	err = st_sensors_write_data_with_mask(indio_dev, drdy_addr,
+					      drdy_mask, (int)enable);
+
+st_accel_set_dataready_irq_error:
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_set_dataready_irq, IIO_ST_SENSORS);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
+{
+	int err = -EINVAL, i;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+		if ((sdata->sensor_settings->fs.fs_avl[i].gain == scale) &&
+				(sdata->sensor_settings->fs.fs_avl[i].gain != 0)) {
+			err = 0;
+			break;
+		}
+	}
+	if (err < 0)
+		goto st_sensors_match_scale_error;
+
+	err = st_sensors_set_fullscale(indio_dev,
+				sdata->sensor_settings->fs.fs_avl[i].num);
+
+st_sensors_match_scale_error:
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_set_fullscale_by_gain, IIO_ST_SENSORS);
+
+static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *ch, int *data)
+{
+	int err;
+	u8 *outdata;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int byte_for_channel;
+
+	byte_for_channel = DIV_ROUND_UP(ch->scan_type.realbits +
+					ch->scan_type.shift, 8);
+	outdata = kmalloc(byte_for_channel, GFP_DMA | GFP_KERNEL);
+	if (!outdata)
+		return -ENOMEM;
+
+	err = regmap_bulk_read(sdata->regmap, ch->address,
+			       outdata, byte_for_channel);
+	if (err < 0)
+		goto st_sensors_free_memory;
+
+	if (byte_for_channel == 1)
+		*data = (s8)*outdata;
+	else if (byte_for_channel == 2)
+		*data = (s16)get_unaligned_le16(outdata);
+	else if (byte_for_channel == 3)
+		*data = (s32)sign_extend32(get_unaligned_le24(outdata), 23);
+
+st_sensors_free_memory:
+	kfree(outdata);
+
+	return err;
+}
+
+int st_sensors_read_info_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *ch, int *val)
+{
+	int err;
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	err = iio_device_claim_direct_mode(indio_dev);
+	if (err)
+		return err;
+
+	mutex_lock(&sdata->odr_lock);
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto out;
+
+	msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
+	err = st_sensors_read_axis_data(indio_dev, ch, val);
+	if (err < 0)
+		goto out;
+
+	*val = *val >> ch->scan_type.shift;
+
+	err = st_sensors_set_enable(indio_dev, false);
+
+out:
+	mutex_unlock(&sdata->odr_lock);
+	iio_device_release_direct_mode(indio_dev);
+
+	return err;
+}
+EXPORT_SYMBOL_NS(st_sensors_read_info_raw, IIO_ST_SENSORS);
+
+/*
+ * st_sensors_get_settings_index() - get index of the sensor settings for a
+ *				     specific device from list of settings
+ * @name: device name buffer reference.
+ * @list: sensor settings list.
+ * @list_length: length of sensor settings list.
+ *
+ * Return: non negative number on success (valid index),
+ *	   negative error code otherwise.
+ */
+int st_sensors_get_settings_index(const char *name,
+				  const struct st_sensor_settings *list,
+				  const int list_length)
+{
+	int i, n;
+
+	for (i = 0; i < list_length; i++) {
+		for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
+			if (strcmp(name, list[i].sensors_supported[n]) == 0)
+				return i;
+		}
+	}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL_NS(st_sensors_get_settings_index, IIO_ST_SENSORS);
+
+/*
+ * st_sensors_verify_id() - verify sensor ID (WhoAmI) is matching with the
+ *			    expected value
+ * @indio_dev: IIO device reference.
+ *
+ * Return: 0 on success (valid sensor ID), else a negative error code.
+ */
+int st_sensors_verify_id(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int wai, err;
+
+	if (sdata->sensor_settings->wai_addr) {
+		err = regmap_read(sdata->regmap,
+				  sdata->sensor_settings->wai_addr, &wai);
+		if (err < 0) {
+			dev_err(&indio_dev->dev,
+				"failed to read Who-Am-I register.\n");
+			return err;
+		}
+
+		if (sdata->sensor_settings->wai != wai) {
+			dev_err(&indio_dev->dev,
+				"%s: WhoAmI mismatch (0x%x).\n",
+				indio_dev->name, wai);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_verify_id, IIO_ST_SENSORS);
+
+ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int i, len = 0;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
+		if (sdata->sensor_settings->odr.odr_avl[i].hz == 0)
+			break;
+
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
+				sdata->sensor_settings->odr.odr_avl[i].hz);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+EXPORT_SYMBOL_NS(st_sensors_sysfs_sampling_frequency_avail, IIO_ST_SENSORS);
+
+ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int i, len = 0, q, r;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+		if (sdata->sensor_settings->fs.fs_avl[i].num == 0)
+			break;
+
+		q = sdata->sensor_settings->fs.fs_avl[i].gain / 1000000;
+		r = sdata->sensor_settings->fs.fs_avl[i].gain % 1000000;
+
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", q, r);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+EXPORT_SYMBOL_NS(st_sensors_sysfs_scale_avail, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h
new file mode 100644
index 000000000..09f3e602a
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_core.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Local functions in the ST Sensors core
+ */
+#ifndef __ST_SENSORS_CORE_H
+#define __ST_SENSORS_CORE_H
+struct iio_dev;
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+				    u8 reg_addr, u8 mask, u8 data);
+#endif
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
new file mode 100644
index 000000000..ee95082c7
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics sensors i2c library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/st_sensors_i2c.h>
+
+#define ST_SENSORS_I2C_MULTIREAD	0x80
+
+static const struct regmap_config st_sensors_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regmap_config st_sensors_i2c_regmap_multiread_bit_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.read_flag_mask = ST_SENSORS_I2C_MULTIREAD,
+};
+
+/*
+ * st_sensors_i2c_configure() - configure I2C interface
+ * @indio_dev: IIO device reference.
+ * @client: i2c client reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_i2c_configure(struct iio_dev *indio_dev,
+			     struct i2c_client *client)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	const struct regmap_config *config;
+
+	if (sdata->sensor_settings->multi_read_bit)
+		config = &st_sensors_i2c_regmap_multiread_bit_config;
+	else
+		config = &st_sensors_i2c_regmap_config;
+
+	sdata->regmap = devm_regmap_init_i2c(client, config);
+	if (IS_ERR(sdata->regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap (%ld)\n",
+			PTR_ERR(sdata->regmap));
+		return PTR_ERR(sdata->regmap);
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	indio_dev->name = client->name;
+
+	sdata->irq = client->irq;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_i2c_configure, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
new file mode 100644
index 000000000..63e302c3f
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics sensors spi library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/common/st_sensors_spi.h>
+
+#define ST_SENSORS_SPI_MULTIREAD	0xc0
+
+static const struct regmap_config st_sensors_spi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regmap_config st_sensors_spi_regmap_multiread_bit_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.read_flag_mask = ST_SENSORS_SPI_MULTIREAD,
+};
+
+/*
+ * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
+ * @spi: spi device reference.
+ *
+ * Return: true if SPI 3-wire mode is selected, false otherwise.
+ */
+static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
+{
+	struct st_sensors_platform_data *pdata;
+	struct device *dev = &spi->dev;
+
+	if (device_property_read_bool(dev, "spi-3wire"))
+		return true;
+
+	pdata = dev_get_platdata(dev);
+	if (pdata && pdata->spi_3wire)
+		return true;
+
+	return false;
+}
+
+/*
+ * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
+ * @spi: spi device reference.
+ * @settings: sensor specific settings reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+static int st_sensors_configure_spi_3_wire(struct spi_device *spi,
+					   struct st_sensor_settings *settings)
+{
+	if (settings->sim.addr) {
+		u8 buffer[] = {
+			settings->sim.addr,
+			settings->sim.value
+		};
+
+		return spi_write(spi, buffer, 2);
+	}
+
+	return 0;
+}
+
+/*
+ * st_sensors_spi_configure() - configure SPI interface
+ * @indio_dev: IIO device reference.
+ * @spi: spi device reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+			     struct spi_device *spi)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	const struct regmap_config *config;
+	int err;
+
+	if (st_sensors_is_spi_3_wire(spi)) {
+		err = st_sensors_configure_spi_3_wire(spi,
+						      sdata->sensor_settings);
+		if (err < 0)
+			return err;
+	}
+
+	if (sdata->sensor_settings->multi_read_bit)
+		config = &st_sensors_spi_regmap_multiread_bit_config;
+	else
+		config = &st_sensors_spi_regmap_config;
+
+	sdata->regmap = devm_regmap_init_spi(spi, config);
+	if (IS_ERR(sdata->regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap (%ld)\n",
+			PTR_ERR(sdata->regmap));
+		return PTR_ERR(sdata->regmap);
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+
+	indio_dev->name = spi->modalias;
+
+	sdata->irq = spi->irq;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_spi_configure, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
new file mode 100644
index 000000000..a0df9250a
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics sensors trigger library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/iio/common/st_sensors.h>
+#include "st_sensors_core.h"
+
+/**
+ * st_sensors_new_samples_available() - check if more samples came in
+ * @indio_dev: IIO device reference.
+ * @sdata: Sensor data.
+ *
+ * returns:
+ * false - no new samples available or read error
+ * true - new samples available
+ */
+static bool st_sensors_new_samples_available(struct iio_dev *indio_dev,
+					     struct st_sensor_data *sdata)
+{
+	int ret, status;
+
+	/* How would I know if I can't check it? */
+	if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
+		return true;
+
+	/* No scan mask, no interrupt */
+	if (!indio_dev->active_scan_mask)
+		return false;
+
+	ret = regmap_read(sdata->regmap,
+			  sdata->sensor_settings->drdy_irq.stat_drdy.addr,
+			  &status);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"error checking samples available\n");
+		return false;
+	}
+
+	return !!(status & sdata->sensor_settings->drdy_irq.stat_drdy.mask);
+}
+
+/**
+ * st_sensors_irq_handler() - top half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+static irqreturn_t st_sensors_irq_handler(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	/* Get the time stamp as close in time as possible */
+	sdata->hw_timestamp = iio_get_time_ns(indio_dev);
+	return IRQ_WAKE_THREAD;
+}
+
+/**
+ * st_sensors_irq_thread() - bottom half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+static irqreturn_t st_sensors_irq_thread(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	/*
+	 * If this trigger is backed by a hardware interrupt and we have a
+	 * status register, check if this IRQ came from us. Notice that
+	 * we will process also if st_sensors_new_samples_available()
+	 * returns negative: if we can't check status, then poll
+	 * unconditionally.
+	 */
+	if (sdata->hw_irq_trigger &&
+	    st_sensors_new_samples_available(indio_dev, sdata)) {
+		iio_trigger_poll_nested(p);
+	} else {
+		dev_dbg(indio_dev->dev.parent, "spurious IRQ\n");
+		return IRQ_NONE;
+	}
+
+	/*
+	 * If we have proper level IRQs the handler will be re-entered if
+	 * the line is still active, so return here and come back in through
+	 * the top half if need be.
+	 */
+	if (!sdata->edge_irq)
+		return IRQ_HANDLED;
+
+	/*
+	 * If we are using edge IRQs, new samples arrived while processing
+	 * the IRQ and those may be missed unless we pick them here, so poll
+	 * again. If the sensor delivery frequency is very high, this thread
+	 * turns into a polled loop handler.
+	 */
+	while (sdata->hw_irq_trigger &&
+	       st_sensors_new_samples_available(indio_dev, sdata)) {
+		dev_dbg(indio_dev->dev.parent,
+			"more samples came in during polling\n");
+		sdata->hw_timestamp = iio_get_time_ns(indio_dev);
+		iio_trigger_poll_nested(p);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+				const struct iio_trigger_ops *trigger_ops)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	struct device *parent = indio_dev->dev.parent;
+	unsigned long irq_trig;
+	int err;
+
+	sdata->trig = devm_iio_trigger_alloc(parent, "%s-trigger",
+					     indio_dev->name);
+	if (sdata->trig == NULL) {
+		dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
+		return -ENOMEM;
+	}
+
+	iio_trigger_set_drvdata(sdata->trig, indio_dev);
+	sdata->trig->ops = trigger_ops;
+
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(sdata->irq));
+	/*
+	 * If the IRQ is triggered on falling edge, we need to mark the
+	 * interrupt as active low, if the hardware supports this.
+	 */
+	switch(irq_trig) {
+	case IRQF_TRIGGER_FALLING:
+	case IRQF_TRIGGER_LOW:
+		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
+			dev_err(&indio_dev->dev,
+				"falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n");
+			if (irq_trig == IRQF_TRIGGER_FALLING)
+				irq_trig = IRQF_TRIGGER_RISING;
+			if (irq_trig == IRQF_TRIGGER_LOW)
+				irq_trig = IRQF_TRIGGER_HIGH;
+		} else {
+			/* Set up INT active low i.e. falling edge */
+			err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->drdy_irq.addr_ihl,
+				sdata->sensor_settings->drdy_irq.mask_ihl, 1);
+			if (err < 0)
+				return err;
+			dev_info(&indio_dev->dev,
+				 "interrupts on the falling edge or active low level\n");
+		}
+		break;
+	case IRQF_TRIGGER_RISING:
+		dev_info(&indio_dev->dev,
+			 "interrupts on the rising edge\n");
+		break;
+	case IRQF_TRIGGER_HIGH:
+		dev_info(&indio_dev->dev,
+			 "interrupts active high level\n");
+		break;
+	default:
+		/* This is the most preferred mode, if possible */
+		dev_err(&indio_dev->dev,
+			"unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig);
+		irq_trig = IRQF_TRIGGER_RISING;
+	}
+
+	/* Tell the interrupt handler that we're dealing with edges */
+	if (irq_trig == IRQF_TRIGGER_FALLING ||
+	    irq_trig == IRQF_TRIGGER_RISING) {
+		if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) {
+			dev_err(&indio_dev->dev,
+				"edge IRQ not supported w/o stat register.\n");
+			return -EOPNOTSUPP;
+		}
+		sdata->edge_irq = true;
+	} else {
+		/*
+		 * If we're not using edges (i.e. level interrupts) we
+		 * just mask off the IRQ, handle one interrupt, then
+		 * if the line is still low, we return to the
+		 * interrupt handler top half again and start over.
+		 */
+		irq_trig |= IRQF_ONESHOT;
+	}
+
+	/*
+	 * If the interrupt pin is Open Drain, by definition this
+	 * means that the interrupt line may be shared with other
+	 * peripherals. But to do this we also need to have a status
+	 * register and mask to figure out if this sensor was firing
+	 * the IRQ or not, so we can tell the interrupt handle that
+	 * it was "our" interrupt.
+	 */
+	if (sdata->int_pin_open_drain &&
+	    sdata->sensor_settings->drdy_irq.stat_drdy.addr)
+		irq_trig |= IRQF_SHARED;
+
+	err = devm_request_threaded_irq(parent,
+					sdata->irq,
+					st_sensors_irq_handler,
+					st_sensors_irq_thread,
+					irq_trig,
+					sdata->trig->name,
+					sdata->trig);
+	if (err) {
+		dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
+		return err;
+	}
+
+	err = devm_iio_trigger_register(parent, sdata->trig);
+	if (err < 0) {
+		dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
+		return err;
+	}
+	indio_dev->trig = iio_trigger_get(sdata->trig);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_allocate_trigger, IIO_ST_SENSORS);
+
+int st_sensors_validate_device(struct iio_trigger *trig,
+			       struct iio_dev *indio_dev)
+{
+	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+
+	if (indio != indio_dev)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_sensors_validate_device, IIO_ST_SENSORS);