Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

68 files changed, 25359 insertions, 0 deletions

diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
new file mode 100644
index 0000000000..c2f97629e9
--- /dev/null
+++ b/drivers/iio/imu/Kconfig
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IIO imu drivers configuration
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Inertial measurement units"
+
+config ADIS16400
+	tristate "Analog Devices ADIS16400 and similar IMU SPI driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices adis16300, adis16344,
+	  adis16350, adis16354, adis16355, adis16360, adis16362, adis16364,
+	  adis16365, adis16400 and adis16405 triaxial inertial sensors
+	  (adis16400 series also have magnetometers).
+
+config ADIS16460
+	tristate "Analog Devices ADIS16460 and similar IMU driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADIS16460 inertial
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adis16460.
+
+config ADIS16475
+	tristate "Analog Devices ADIS16475 and similar IMU driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADIS16470, ADIS16475,
+	  ADIS16477, ADIS16465, ADIS16467, ADIS16500, ADIS16505, ADIS16507 inertial
+	  sensors.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adis16475.
+
+config ADIS16480
+	tristate "Analog Devices ADIS16480 and similar IMU driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	select CRC32
+	help
+	  Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
+	  ADIS16485, ADIS16488 inertial sensors.
+
+source "drivers/iio/imu/bmi160/Kconfig"
+source "drivers/iio/imu/bno055/Kconfig"
+
+config FXOS8700
+	tristate
+
+config FXOS8700_I2C
+	tristate "NXP FXOS8700 I2C driver"
+	depends on I2C
+	select FXOS8700
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the NXP FXOS8700 m+g combo
+	  sensor on I2C.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called fxos8700_i2c.
+
+config FXOS8700_SPI
+	tristate "NXP FXOS8700 SPI driver"
+	depends on SPI
+	select FXOS8700
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the NXP FXOS8700 m+g combo
+	  sensor on SPI.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called fxos8700_spi.
+
+config KMX61
+	tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for Kionix KMX61 6-axis
+	  accelerometer and magnetometer.
+	  To compile this driver as module, choose M here: the module will
+	  be called kmx61.
+
+source "drivers/iio/imu/inv_icm42600/Kconfig"
+source "drivers/iio/imu/inv_mpu6050/Kconfig"
+source "drivers/iio/imu/st_lsm6dsx/Kconfig"
+source "drivers/iio/imu/st_lsm9ds0/Kconfig"
+
+endmenu
+
+config IIO_ADIS_LIB
+	tristate
+	help
+	  A set of IO helper functions for the Analog Devices ADIS* device family.
+
+config IIO_ADIS_LIB_BUFFER
+	bool
+	select IIO_TRIGGERED_BUFFER
+	help
+	  A set of buffer helper functions for the Analog Devices ADIS* device
+	  family.
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
new file mode 100644
index 0000000000..6eb6120347
--- /dev/null
+++ b/drivers/iio/imu/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Inertial Measurement Units
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ADIS16400) += adis16400.o
+obj-$(CONFIG_ADIS16460) += adis16460.o
+obj-$(CONFIG_ADIS16475) += adis16475.o
+obj-$(CONFIG_ADIS16480) += adis16480.o
+
+adis_lib-y += adis.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
+obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
+
+obj-y += bmi160/
+obj-y += bno055/
+
+obj-$(CONFIG_FXOS8700) += fxos8700_core.o
+obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
+obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
+
+obj-y += inv_icm42600/
+obj-y += inv_mpu6050/
+
+obj-$(CONFIG_KMX61) += kmx61.o
+
+obj-y += st_lsm6dsx/
+obj-y += st_lsm9ds0/
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
new file mode 100644
index 0000000000..bc40240b29
--- /dev/null
+++ b/drivers/iio/imu/adis.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS_MSC_CTRL_DATA_RDY_EN	BIT(2)
+#define ADIS_MSC_CTRL_DATA_RDY_POL_HIGH	BIT(1)
+#define ADIS_MSC_CTRL_DATA_RDY_DIO2	BIT(0)
+#define ADIS_GLOB_CMD_SW_RESET		BIT(7)
+
+/**
+ * __adis_write_reg() - write N bytes to register (unlocked version)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: The value to write to device (up to 4 bytes)
+ * @size: The size of the @value (in bytes)
+ */
+int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
+		     unsigned int size)
+{
+	unsigned int page = reg / ADIS_PAGE_SIZE;
+	int ret, i;
+	struct spi_message msg;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = adis->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 2,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 4,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 6,
+			.bits_per_word = 8,
+			.len = 2,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 8,
+			.bits_per_word = 8,
+			.len = 2,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+		},
+	};
+
+	spi_message_init(&msg);
+
+	if (adis->current_page != page) {
+		adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+		adis->tx[1] = page;
+		spi_message_add_tail(&xfers[0], &msg);
+	}
+
+	switch (size) {
+	case 4:
+		adis->tx[8] = ADIS_WRITE_REG(reg + 3);
+		adis->tx[9] = (value >> 24) & 0xff;
+		adis->tx[6] = ADIS_WRITE_REG(reg + 2);
+		adis->tx[7] = (value >> 16) & 0xff;
+		fallthrough;
+	case 2:
+		adis->tx[4] = ADIS_WRITE_REG(reg + 1);
+		adis->tx[5] = (value >> 8) & 0xff;
+		fallthrough;
+	case 1:
+		adis->tx[2] = ADIS_WRITE_REG(reg);
+		adis->tx[3] = value & 0xff;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xfers[size].cs_change = 0;
+
+	for (i = 1; i <= size; i++)
+		spi_message_add_tail(&xfers[i], &msg);
+
+	ret = spi_sync(adis->spi, &msg);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to write register 0x%02X: %d\n",
+			reg, ret);
+	} else {
+		adis->current_page = page;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(__adis_write_reg, IIO_ADISLIB);
+
+/**
+ * __adis_read_reg() - read N bytes from register (unlocked version)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ * @size: The size of the @val buffer
+ */
+int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
+		    unsigned int size)
+{
+	unsigned int page = reg / ADIS_PAGE_SIZE;
+	struct spi_message msg;
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = adis->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->write_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 2,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->read_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.tx_buf = adis->tx + 4,
+			.rx_buf = adis->rx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay.value = adis->data->read_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+			.cs_change_delay.value = adis->data->cs_change_delay,
+			.cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
+		}, {
+			.rx_buf = adis->rx + 2,
+			.bits_per_word = 8,
+			.len = 2,
+			.delay.value = adis->data->read_delay,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+		},
+	};
+
+	spi_message_init(&msg);
+
+	if (adis->current_page != page) {
+		adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+		adis->tx[1] = page;
+		spi_message_add_tail(&xfers[0], &msg);
+	}
+
+	switch (size) {
+	case 4:
+		adis->tx[2] = ADIS_READ_REG(reg + 2);
+		adis->tx[3] = 0;
+		spi_message_add_tail(&xfers[1], &msg);
+		fallthrough;
+	case 2:
+		adis->tx[4] = ADIS_READ_REG(reg);
+		adis->tx[5] = 0;
+		spi_message_add_tail(&xfers[2], &msg);
+		spi_message_add_tail(&xfers[3], &msg);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = spi_sync(adis->spi, &msg);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to read register 0x%02X: %d\n",
+			reg, ret);
+		return ret;
+	}
+
+	adis->current_page = page;
+
+	switch (size) {
+	case 4:
+		*val = get_unaligned_be32(adis->rx);
+		break;
+	case 2:
+		*val = get_unaligned_be16(adis->rx + 2);
+		break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(__adis_read_reg, IIO_ADISLIB);
+/**
+ * __adis_update_bits_base() - ADIS Update bits function - Unlocked version
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @mask: Bitmask to change
+ * @val: Value to be written
+ * @size: Size of the register to update
+ *
+ * Updates the desired bits of @reg in accordance with @mask and @val.
+ */
+int __adis_update_bits_base(struct adis *adis, unsigned int reg, const u32 mask,
+			    const u32 val, u8 size)
+{
+	int ret;
+	u32 __val;
+
+	ret = __adis_read_reg(adis, reg, &__val, size);
+	if (ret)
+		return ret;
+
+	__val = (__val & ~mask) | (val & mask);
+
+	return __adis_write_reg(adis, reg, __val, size);
+}
+EXPORT_SYMBOL_NS_GPL(__adis_update_bits_base, IIO_ADISLIB);
+
+#ifdef CONFIG_DEBUG_FS
+
+int adis_debugfs_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+			    unsigned int writeval, unsigned int *readval)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+
+	if (readval) {
+		u16 val16;
+		int ret;
+
+		ret = adis_read_reg_16(adis, reg, &val16);
+		if (ret == 0)
+			*readval = val16;
+
+		return ret;
+	}
+
+	return adis_write_reg_16(adis, reg, writeval);
+}
+EXPORT_SYMBOL_NS(adis_debugfs_reg_access, IIO_ADISLIB);
+
+#endif
+
+/**
+ * __adis_enable_irq() - Enable or disable data ready IRQ (unlocked)
+ * @adis: The adis device
+ * @enable: Whether to enable the IRQ
+ *
+ * Returns 0 on success, negative error code otherwise
+ */
+int __adis_enable_irq(struct adis *adis, bool enable)
+{
+	int ret;
+	u16 msc;
+
+	if (adis->data->enable_irq)
+		return adis->data->enable_irq(adis, enable);
+
+	if (adis->data->unmasked_drdy) {
+		if (enable)
+			enable_irq(adis->spi->irq);
+		else
+			disable_irq(adis->spi->irq);
+
+		return 0;
+	}
+
+	ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
+	if (ret)
+		return ret;
+
+	msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
+	msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
+	if (enable)
+		msc |= ADIS_MSC_CTRL_DATA_RDY_EN;
+	else
+		msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
+
+	return __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
+}
+EXPORT_SYMBOL_NS(__adis_enable_irq, IIO_ADISLIB);
+
+/**
+ * __adis_check_status() - Check the device for error conditions (unlocked)
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int __adis_check_status(struct adis *adis)
+{
+	u16 status;
+	int ret;
+	int i;
+
+	ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+	if (ret)
+		return ret;
+
+	status &= adis->data->status_error_mask;
+
+	if (status == 0)
+		return 0;
+
+	for (i = 0; i < 16; ++i) {
+		if (status & BIT(i)) {
+			dev_err(&adis->spi->dev, "%s.\n",
+				adis->data->status_error_msgs[i]);
+		}
+	}
+
+	return -EIO;
+}
+EXPORT_SYMBOL_NS_GPL(__adis_check_status, IIO_ADISLIB);
+
+/**
+ * __adis_reset() - Reset the device (unlocked version)
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int __adis_reset(struct adis *adis)
+{
+	int ret;
+	const struct adis_timeout *timeouts = adis->data->timeouts;
+
+	ret = __adis_write_reg_8(adis, adis->data->glob_cmd_reg,
+				 ADIS_GLOB_CMD_SW_RESET);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
+		return ret;
+	}
+
+	msleep(timeouts->sw_reset_ms);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(__adis_reset, IIO_ADIS_LIB);
+
+static int adis_self_test(struct adis *adis)
+{
+	int ret;
+	const struct adis_timeout *timeouts = adis->data->timeouts;
+
+	ret = __adis_write_reg_16(adis, adis->data->self_test_reg,
+				  adis->data->self_test_mask);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to initiate self test: %d\n",
+			ret);
+		return ret;
+	}
+
+	msleep(timeouts->self_test_ms);
+
+	ret = __adis_check_status(adis);
+
+	if (adis->data->self_test_no_autoclear)
+		__adis_write_reg_16(adis, adis->data->self_test_reg, 0x00);
+
+	return ret;
+}
+
+/**
+ * __adis_initial_startup() - Device initial setup
+ * @adis: The adis device
+ *
+ * The function performs a HW reset via a reset pin that should be specified
+ * via GPIOLIB. If no pin is configured a SW reset will be performed.
+ * The RST pin for the ADIS devices should be configured as ACTIVE_LOW.
+ *
+ * After the self-test operation is performed, the function will also check
+ * that the product ID is as expected. This assumes that drivers providing
+ * 'prod_id_reg' will also provide the 'prod_id'.
+ *
+ * Returns 0 if the device is operational, a negative error code otherwise.
+ *
+ * This function should be called early on in the device initialization sequence
+ * to ensure that the device is in a sane and known state and that it is usable.
+ */
+int __adis_initial_startup(struct adis *adis)
+{
+	const struct adis_timeout *timeouts = adis->data->timeouts;
+	struct gpio_desc *gpio;
+	u16 prod_id;
+	int ret;
+
+	/* check if the device has rst pin low */
+	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	if (gpio) {
+		usleep_range(10, 12);
+		/* bring device out of reset */
+		gpiod_set_value_cansleep(gpio, 0);
+		msleep(timeouts->reset_ms);
+	} else {
+		ret = __adis_reset(adis);
+		if (ret)
+			return ret;
+	}
+
+	ret = adis_self_test(adis);
+	if (ret)
+		return ret;
+
+	/*
+	 * don't bother calling this if we can't unmask the IRQ as in this case
+	 * the IRQ is most likely not yet requested and we will request it
+	 * with 'IRQF_NO_AUTOEN' anyways.
+	 */
+	if (!adis->data->unmasked_drdy)
+		__adis_enable_irq(adis, false);
+
+	if (!adis->data->prod_id_reg)
+		return 0;
+
+	ret = adis_read_reg_16(adis, adis->data->prod_id_reg, &prod_id);
+	if (ret)
+		return ret;
+
+	if (prod_id != adis->data->prod_id)
+		dev_warn(&adis->spi->dev,
+			 "Device ID(%u) and product ID(%u) do not match.\n",
+			 adis->data->prod_id, prod_id);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(__adis_initial_startup, IIO_ADISLIB);
+
+/**
+ * adis_single_conversion() - Performs a single sample conversion
+ * @indio_dev: The IIO device
+ * @chan: The IIO channel
+ * @error_mask: Mask for the error bit
+ * @val: Result of the conversion
+ *
+ * Returns IIO_VAL_INT on success, a negative error code otherwise.
+ *
+ * The function performs a single conversion on a given channel and post
+ * processes the value accordingly to the channel spec. If a error_mask is given
+ * the function will check if the mask is set in the returned raw value. If it
+ * is set the function will perform a self-check. If the device does not report
+ * a error bit in the channels raw value set error_mask to 0.
+ */
+int adis_single_conversion(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   unsigned int error_mask, int *val)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	unsigned int uval;
+	int ret;
+
+	mutex_lock(&adis->state_lock);
+
+	ret = __adis_read_reg(adis, chan->address, &uval,
+			      chan->scan_type.storagebits / 8);
+	if (ret)
+		goto err_unlock;
+
+	if (uval & error_mask) {
+		ret = __adis_check_status(adis);
+		if (ret)
+			goto err_unlock;
+	}
+
+	if (chan->scan_type.sign == 's')
+		*val = sign_extend32(uval, chan->scan_type.realbits - 1);
+	else
+		*val = uval & ((1 << chan->scan_type.realbits) - 1);
+
+	ret = IIO_VAL_INT;
+err_unlock:
+	mutex_unlock(&adis->state_lock);
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(adis_single_conversion, IIO_ADISLIB);
+
+/**
+ * adis_init() - Initialize adis device structure
+ * @adis:	The adis device
+ * @indio_dev:	The iio device
+ * @spi:	The spi device
+ * @data:	Chip specific data
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function must be called, before any other adis helper function may be
+ * called.
+ */
+int adis_init(struct adis *adis, struct iio_dev *indio_dev,
+	      struct spi_device *spi, const struct adis_data *data)
+{
+	if (!data || !data->timeouts) {
+		dev_err(&spi->dev, "No config data or timeouts not defined!\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&adis->state_lock);
+	adis->spi = spi;
+	adis->data = data;
+	iio_device_set_drvdata(indio_dev, adis);
+
+	if (data->has_paging) {
+		/* Need to set the page before first read/write */
+		adis->current_page = -1;
+	} else {
+		/* Page will always be 0 */
+		adis->current_page = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(adis_init, IIO_ADISLIB);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Common library code for ADIS16XXX devices");
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
new file mode 100644
index 0000000000..3eda32e12a
--- /dev/null
+++ b/drivers/iio/imu/adis16400.c
@@ -0,0 +1,1243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * adis16400.c	support Analog Devices ADIS16400/5
+ *		3d 2g Linear Accelerometers,
+ *		3d Gyroscopes,
+ *		3d Magnetometers via SPI
+ *
+ * Copyright (c) 2009 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2007 Jonathan Cameron <jic23@kernel.org>
+ * Copyright (c) 2011 Analog Devices Inc.
+ */
+
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/bitops.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS16400_STARTUP_DELAY	290 /* ms */
+#define ADIS16400_MTEST_DELAY 90 /* ms */
+
+#define ADIS16400_FLASH_CNT  0x00 /* Flash memory write count */
+#define ADIS16400_SUPPLY_OUT 0x02 /* Power supply measurement */
+#define ADIS16400_XGYRO_OUT 0x04 /* X-axis gyroscope output */
+#define ADIS16400_YGYRO_OUT 0x06 /* Y-axis gyroscope output */
+#define ADIS16400_ZGYRO_OUT 0x08 /* Z-axis gyroscope output */
+#define ADIS16400_XACCL_OUT 0x0A /* X-axis accelerometer output */
+#define ADIS16400_YACCL_OUT 0x0C /* Y-axis accelerometer output */
+#define ADIS16400_ZACCL_OUT 0x0E /* Z-axis accelerometer output */
+#define ADIS16400_XMAGN_OUT 0x10 /* X-axis magnetometer measurement */
+#define ADIS16400_YMAGN_OUT 0x12 /* Y-axis magnetometer measurement */
+#define ADIS16400_ZMAGN_OUT 0x14 /* Z-axis magnetometer measurement */
+#define ADIS16400_TEMP_OUT  0x16 /* Temperature output */
+#define ADIS16400_AUX_ADC   0x18 /* Auxiliary ADC measurement */
+
+#define ADIS16350_XTEMP_OUT 0x10 /* X-axis gyroscope temperature measurement */
+#define ADIS16350_YTEMP_OUT 0x12 /* Y-axis gyroscope temperature measurement */
+#define ADIS16350_ZTEMP_OUT 0x14 /* Z-axis gyroscope temperature measurement */
+
+#define ADIS16300_PITCH_OUT 0x12 /* X axis inclinometer output measurement */
+#define ADIS16300_ROLL_OUT  0x14 /* Y axis inclinometer output measurement */
+#define ADIS16300_AUX_ADC   0x16 /* Auxiliary ADC measurement */
+
+#define ADIS16448_BARO_OUT	0x16 /* Barometric pressure output */
+#define ADIS16448_TEMP_OUT  0x18 /* Temperature output */
+
+/* Calibration parameters */
+#define ADIS16400_XGYRO_OFF 0x1A /* X-axis gyroscope bias offset factor */
+#define ADIS16400_YGYRO_OFF 0x1C /* Y-axis gyroscope bias offset factor */
+#define ADIS16400_ZGYRO_OFF 0x1E /* Z-axis gyroscope bias offset factor */
+#define ADIS16400_XACCL_OFF 0x20 /* X-axis acceleration bias offset factor */
+#define ADIS16400_YACCL_OFF 0x22 /* Y-axis acceleration bias offset factor */
+#define ADIS16400_ZACCL_OFF 0x24 /* Z-axis acceleration bias offset factor */
+#define ADIS16400_XMAGN_HIF 0x26 /* X-axis magnetometer, hard-iron factor */
+#define ADIS16400_YMAGN_HIF 0x28 /* Y-axis magnetometer, hard-iron factor */
+#define ADIS16400_ZMAGN_HIF 0x2A /* Z-axis magnetometer, hard-iron factor */
+#define ADIS16400_XMAGN_SIF 0x2C /* X-axis magnetometer, soft-iron factor */
+#define ADIS16400_YMAGN_SIF 0x2E /* Y-axis magnetometer, soft-iron factor */
+#define ADIS16400_ZMAGN_SIF 0x30 /* Z-axis magnetometer, soft-iron factor */
+
+#define ADIS16400_GPIO_CTRL 0x32 /* Auxiliary digital input/output control */
+#define ADIS16400_MSC_CTRL  0x34 /* Miscellaneous control */
+#define ADIS16400_SMPL_PRD  0x36 /* Internal sample period (rate) control */
+#define ADIS16400_SENS_AVG  0x38 /* Dynamic range and digital filter control */
+#define ADIS16400_SLP_CNT   0x3A /* Sleep mode control */
+#define ADIS16400_DIAG_STAT 0x3C /* System status */
+
+/* Alarm functions */
+#define ADIS16400_GLOB_CMD  0x3E /* System command */
+#define ADIS16400_ALM_MAG1  0x40 /* Alarm 1 amplitude threshold */
+#define ADIS16400_ALM_MAG2  0x42 /* Alarm 2 amplitude threshold */
+#define ADIS16400_ALM_SMPL1 0x44 /* Alarm 1 sample size */
+#define ADIS16400_ALM_SMPL2 0x46 /* Alarm 2 sample size */
+#define ADIS16400_ALM_CTRL  0x48 /* Alarm control */
+#define ADIS16400_AUX_DAC   0x4A /* Auxiliary DAC data */
+
+#define ADIS16334_LOT_ID1   0x52 /* Lot identification code 1 */
+#define ADIS16334_LOT_ID2   0x54 /* Lot identification code 2 */
+#define ADIS16400_PRODUCT_ID 0x56 /* Product identifier */
+#define ADIS16334_SERIAL_NUMBER 0x58 /* Serial number, lot specific */
+
+#define ADIS16400_ERROR_ACTIVE			(1<<14)
+#define ADIS16400_NEW_DATA			(1<<14)
+
+/* MSC_CTRL */
+#define ADIS16400_MSC_CTRL_MEM_TEST		(1<<11)
+#define ADIS16400_MSC_CTRL_INT_SELF_TEST	(1<<10)
+#define ADIS16400_MSC_CTRL_NEG_SELF_TEST	(1<<9)
+#define ADIS16400_MSC_CTRL_POS_SELF_TEST	(1<<8)
+#define ADIS16400_MSC_CTRL_GYRO_BIAS		(1<<7)
+#define ADIS16400_MSC_CTRL_ACCL_ALIGN		(1<<6)
+#define ADIS16400_MSC_CTRL_DATA_RDY_EN		(1<<2)
+#define ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH	(1<<1)
+#define ADIS16400_MSC_CTRL_DATA_RDY_DIO2	(1<<0)
+
+/* SMPL_PRD */
+#define ADIS16400_SMPL_PRD_TIME_BASE	(1<<7)
+#define ADIS16400_SMPL_PRD_DIV_MASK	0x7F
+
+/* DIAG_STAT */
+#define ADIS16400_DIAG_STAT_ZACCL_FAIL	15
+#define ADIS16400_DIAG_STAT_YACCL_FAIL	14
+#define ADIS16400_DIAG_STAT_XACCL_FAIL	13
+#define ADIS16400_DIAG_STAT_XGYRO_FAIL	12
+#define ADIS16400_DIAG_STAT_YGYRO_FAIL	11
+#define ADIS16400_DIAG_STAT_ZGYRO_FAIL	10
+#define ADIS16400_DIAG_STAT_ALARM2	9
+#define ADIS16400_DIAG_STAT_ALARM1	8
+#define ADIS16400_DIAG_STAT_FLASH_CHK	6
+#define ADIS16400_DIAG_STAT_SELF_TEST	5
+#define ADIS16400_DIAG_STAT_OVERFLOW	4
+#define ADIS16400_DIAG_STAT_SPI_FAIL	3
+#define ADIS16400_DIAG_STAT_FLASH_UPT	2
+#define ADIS16400_DIAG_STAT_POWER_HIGH	1
+#define ADIS16400_DIAG_STAT_POWER_LOW	0
+
+/* GLOB_CMD */
+#define ADIS16400_GLOB_CMD_SW_RESET	(1<<7)
+#define ADIS16400_GLOB_CMD_P_AUTO_NULL	(1<<4)
+#define ADIS16400_GLOB_CMD_FLASH_UPD	(1<<3)
+#define ADIS16400_GLOB_CMD_DAC_LATCH	(1<<2)
+#define ADIS16400_GLOB_CMD_FAC_CALIB	(1<<1)
+#define ADIS16400_GLOB_CMD_AUTO_NULL	(1<<0)
+
+/* SLP_CNT */
+#define ADIS16400_SLP_CNT_POWER_OFF	(1<<8)
+
+#define ADIS16334_RATE_DIV_SHIFT 8
+#define ADIS16334_RATE_INT_CLK BIT(0)
+
+#define ADIS16400_SPI_SLOW	(u32)(300 * 1000)
+#define ADIS16400_SPI_BURST	(u32)(1000 * 1000)
+#define ADIS16400_SPI_FAST	(u32)(2000 * 1000)
+
+#define ADIS16400_HAS_PROD_ID		BIT(0)
+#define ADIS16400_NO_BURST		BIT(1)
+#define ADIS16400_HAS_SLOW_MODE		BIT(2)
+#define ADIS16400_HAS_SERIAL_NUMBER	BIT(3)
+#define ADIS16400_BURST_DIAG_STAT	BIT(4)
+
+struct adis16400_state;
+
+struct adis16400_chip_info {
+	const struct iio_chan_spec *channels;
+	const struct adis_data adis_data;
+	const int num_channels;
+	const long flags;
+	unsigned int gyro_scale_micro;
+	unsigned int accel_scale_micro;
+	int temp_scale_nano;
+	int temp_offset;
+	/* set_freq() & get_freq() need to avoid using ADIS lib's state lock */
+	int (*set_freq)(struct adis16400_state *st, unsigned int freq);
+	int (*get_freq)(struct adis16400_state *st);
+};
+
+/**
+ * struct adis16400_state - device instance specific data
+ * @variant:	chip variant info
+ * @filt_int:	integer part of requested filter frequency
+ * @adis:	adis device
+ * @avail_scan_mask:	NULL terminated array of bitmaps of channels
+ *			that must be enabled together
+ **/
+struct adis16400_state {
+	struct adis16400_chip_info	*variant;
+	int				filt_int;
+
+	struct adis adis;
+	unsigned long avail_scan_mask[2];
+};
+
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+enum {
+	ADIS16400_SCAN_SUPPLY,
+	ADIS16400_SCAN_GYRO_X,
+	ADIS16400_SCAN_GYRO_Y,
+	ADIS16400_SCAN_GYRO_Z,
+	ADIS16400_SCAN_ACC_X,
+	ADIS16400_SCAN_ACC_Y,
+	ADIS16400_SCAN_ACC_Z,
+	ADIS16400_SCAN_MAGN_X,
+	ADIS16400_SCAN_MAGN_Y,
+	ADIS16400_SCAN_MAGN_Z,
+	ADIS16400_SCAN_BARO,
+	ADIS16350_SCAN_TEMP_X,
+	ADIS16350_SCAN_TEMP_Y,
+	ADIS16350_SCAN_TEMP_Z,
+	ADIS16300_SCAN_INCLI_X,
+	ADIS16300_SCAN_INCLI_Y,
+	ADIS16400_SCAN_ADC,
+	ADIS16400_SCAN_TIMESTAMP,
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t adis16400_show_serial_number(struct file *file,
+		char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct adis16400_state *st = file->private_data;
+	u16 lot1, lot2, serial_number;
+	char buf[16];
+	size_t len;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID1, &lot1);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID2, &lot2);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16334_SERIAL_NUMBER,
+			&serial_number);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf), "%.4x-%.4x-%.4x\n", lot1, lot2,
+			serial_number);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16400_serial_number_fops = {
+	.open = simple_open,
+	.read = adis16400_show_serial_number,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static int adis16400_show_product_id(void *arg, u64 *val)
+{
+	struct adis16400_state *st = arg;
+	uint16_t prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16400_PRODUCT_ID, &prod_id);
+	if (ret)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_product_id_fops,
+	adis16400_show_product_id, NULL, "%lld\n");
+
+static int adis16400_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16400_state *st = arg;
+	uint16_t flash_count;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16400_FLASH_CNT, &flash_count);
+	if (ret)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_flash_count_fops,
+	adis16400_show_flash_count, NULL, "%lld\n");
+
+static int adis16400_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+
+	if (st->variant->flags & ADIS16400_HAS_SERIAL_NUMBER)
+		debugfs_create_file_unsafe("serial_number", 0400,
+				d, st, &adis16400_serial_number_fops);
+	if (st->variant->flags & ADIS16400_HAS_PROD_ID)
+		debugfs_create_file_unsafe("product_id", 0400,
+				d, st, &adis16400_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+			d, st, &adis16400_flash_count_fops);
+
+	return 0;
+}
+
+#else
+
+static int adis16400_debugfs_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+#endif
+
+enum adis16400_chip_variant {
+	ADIS16300,
+	ADIS16334,
+	ADIS16350,
+	ADIS16360,
+	ADIS16362,
+	ADIS16364,
+	ADIS16367,
+	ADIS16400,
+	ADIS16445,
+	ADIS16448,
+};
+
+static int adis16334_get_freq(struct adis16400_state *st)
+{
+	int ret;
+	uint16_t t;
+
+	ret = __adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
+	if (ret)
+		return ret;
+
+	t >>= ADIS16334_RATE_DIV_SHIFT;
+
+	return 819200 >> t;
+}
+
+static int adis16334_set_freq(struct adis16400_state *st, unsigned int freq)
+{
+	unsigned int t;
+
+	if (freq < 819200)
+		t = ilog2(819200 / freq);
+	else
+		t = 0;
+
+	if (t > 0x31)
+		t = 0x31;
+
+	t <<= ADIS16334_RATE_DIV_SHIFT;
+	t |= ADIS16334_RATE_INT_CLK;
+
+	return __adis_write_reg_16(&st->adis, ADIS16400_SMPL_PRD, t);
+}
+
+static int adis16400_get_freq(struct adis16400_state *st)
+{
+	int sps, ret;
+	uint16_t t;
+
+	ret = __adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
+	if (ret)
+		return ret;
+
+	sps = (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 52851 : 1638404;
+	sps /= (t & ADIS16400_SMPL_PRD_DIV_MASK) + 1;
+
+	return sps;
+}
+
+static int adis16400_set_freq(struct adis16400_state *st, unsigned int freq)
+{
+	unsigned int t;
+	uint8_t val = 0;
+
+	t = 1638404 / freq;
+	if (t >= 128) {
+		val |= ADIS16400_SMPL_PRD_TIME_BASE;
+		t = 52851 / freq;
+		if (t >= 128)
+			t = 127;
+	} else if (t != 0) {
+		t--;
+	}
+
+	val |= t;
+
+	if (t >= 0x0A || (val & ADIS16400_SMPL_PRD_TIME_BASE))
+		st->adis.spi->max_speed_hz = ADIS16400_SPI_SLOW;
+	else
+		st->adis.spi->max_speed_hz = ADIS16400_SPI_FAST;
+
+	return __adis_write_reg_8(&st->adis, ADIS16400_SMPL_PRD, val);
+}
+
+static const unsigned int adis16400_3db_divisors[] = {
+	[0] = 2, /* Special case */
+	[1] = 6,
+	[2] = 12,
+	[3] = 25,
+	[4] = 50,
+	[5] = 100,
+	[6] = 200,
+	[7] = 200, /* Not a valid setting */
+};
+
+static int __adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	uint16_t val16;
+	int i, ret;
+
+	for (i = ARRAY_SIZE(adis16400_3db_divisors) - 1; i >= 1; i--) {
+		if (sps / adis16400_3db_divisors[i] >= val)
+			break;
+	}
+
+	ret = __adis_read_reg_16(&st->adis, ADIS16400_SENS_AVG, &val16);
+	if (ret)
+		return ret;
+
+	ret = __adis_write_reg_16(&st->adis, ADIS16400_SENS_AVG,
+					 (val16 & ~0x07) | i);
+	return ret;
+}
+
+/* Power down the device */
+static int adis16400_stop_device(struct iio_dev *indio_dev)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = adis_write_reg_16(&st->adis, ADIS16400_SLP_CNT,
+			ADIS16400_SLP_CNT_POWER_OFF);
+	if (ret)
+		dev_err(&indio_dev->dev,
+			"problem with turning device off: SLP_CNT");
+
+	return ret;
+}
+
+static int adis16400_initial_setup(struct iio_dev *indio_dev)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	uint16_t prod_id, smp_prd;
+	unsigned int device_id;
+	int ret;
+
+	/* use low spi speed for init if the device has a slow mode */
+	if (st->variant->flags & ADIS16400_HAS_SLOW_MODE)
+		st->adis.spi->max_speed_hz = ADIS16400_SPI_SLOW;
+	else
+		st->adis.spi->max_speed_hz = ADIS16400_SPI_FAST;
+	st->adis.spi->mode = SPI_MODE_3;
+	spi_setup(st->adis.spi);
+
+	ret = __adis_initial_startup(&st->adis);
+	if (ret)
+		return ret;
+
+	if (st->variant->flags & ADIS16400_HAS_PROD_ID) {
+		ret = adis_read_reg_16(&st->adis,
+						ADIS16400_PRODUCT_ID, &prod_id);
+		if (ret)
+			goto err_ret;
+
+		if (sscanf(indio_dev->name, "adis%u\n", &device_id) != 1) {
+			ret = -EINVAL;
+			goto err_ret;
+		}
+
+		if (prod_id != device_id)
+			dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+					device_id, prod_id);
+
+		dev_info(&indio_dev->dev, "%s: prod_id 0x%04x at CS%d (irq %d)\n",
+			indio_dev->name, prod_id,
+			spi_get_chipselect(st->adis.spi, 0), st->adis.spi->irq);
+	}
+	/* use high spi speed if possible */
+	if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {
+		ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &smp_prd);
+		if (ret)
+			goto err_ret;
+
+		if ((smp_prd & ADIS16400_SMPL_PRD_DIV_MASK) < 0x0A) {
+			st->adis.spi->max_speed_hz = ADIS16400_SPI_FAST;
+			spi_setup(st->adis.spi);
+		}
+	}
+
+err_ret:
+	return ret;
+}
+
+static const uint8_t adis16400_addresses[] = {
+	[ADIS16400_SCAN_GYRO_X] = ADIS16400_XGYRO_OFF,
+	[ADIS16400_SCAN_GYRO_Y] = ADIS16400_YGYRO_OFF,
+	[ADIS16400_SCAN_GYRO_Z] = ADIS16400_ZGYRO_OFF,
+	[ADIS16400_SCAN_ACC_X] = ADIS16400_XACCL_OFF,
+	[ADIS16400_SCAN_ACC_Y] = ADIS16400_YACCL_OFF,
+	[ADIS16400_SCAN_ACC_Z] = ADIS16400_ZACCL_OFF,
+};
+
+static int adis16400_write_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	int ret, sps;
+
+	switch (info) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = adis_write_reg_16(&st->adis,
+				adis16400_addresses[chan->scan_index], val);
+		return ret;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		/*
+		 * Need to cache values so we can update if the frequency
+		 * changes.
+		 */
+		adis_dev_lock(&st->adis);
+		st->filt_int = val;
+		/* Work out update to current value */
+		sps = st->variant->get_freq(st);
+		if (sps < 0) {
+			adis_dev_unlock(&st->adis);
+			return sps;
+		}
+
+		ret = __adis16400_set_filter(indio_dev, sps,
+			val * 1000 + val2 / 1000);
+		adis_dev_unlock(&st->adis);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		sps = val * 1000 + val2 / 1000;
+
+		if (sps <= 0)
+			return -EINVAL;
+
+		adis_dev_lock(&st->adis);
+		ret = st->variant->set_freq(st, sps);
+		adis_dev_unlock(&st->adis);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16400_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int *val, int *val2, long info)
+{
+	struct adis16400_state *st = iio_priv(indio_dev);
+	int16_t val16;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = 0;
+			*val2 = st->variant->gyro_scale_micro;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_VOLTAGE:
+			*val = 0;
+			if (chan->channel == 0) {
+				*val = 2;
+				*val2 = 418000; /* 2.418 mV */
+			} else {
+				*val = 0;
+				*val2 = 805800; /* 805.8 uV */
+			}
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_ACCEL:
+			*val = 0;
+			*val2 = st->variant->accel_scale_micro;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MAGN:
+			*val = 0;
+			*val2 = 500; /* 0.5 mgauss */
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			*val = st->variant->temp_scale_nano / 1000000;
+			*val2 = (st->variant->temp_scale_nano % 1000000);
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_PRESSURE:
+			/* 20 uBar = 0.002kPascal */
+			*val = 0;
+			*val2 = 2000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = adis_read_reg_16(&st->adis,
+				adis16400_addresses[chan->scan_index], &val16);
+		if (ret)
+			return ret;
+		val16 = sign_extend32(val16, 11);
+		*val = val16;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		/* currently only temperature */
+		*val = st->variant->temp_offset;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		adis_dev_lock(&st->adis);
+		/* Need both the number of taps and the sampling frequency */
+		ret = __adis_read_reg_16(&st->adis,
+						ADIS16400_SENS_AVG,
+						&val16);
+		if (ret) {
+			adis_dev_unlock(&st->adis);
+			return ret;
+		}
+		ret = st->variant->get_freq(st);
+		adis_dev_unlock(&st->adis);
+		if (ret)
+			return ret;
+		ret /= adis16400_3db_divisors[val16 & 0x07];
+		*val = ret / 1000;
+		*val2 = (ret % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		adis_dev_lock(&st->adis);
+		ret = st->variant->get_freq(st);
+		adis_dev_unlock(&st->adis);
+		if (ret)
+			return ret;
+		*val = ret / 1000;
+		*val2 = (ret % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+#if IS_ENABLED(CONFIG_IIO_BUFFER)
+static irqreturn_t adis16400_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adis16400_state *st = iio_priv(indio_dev);
+	struct adis *adis = &st->adis;
+	void *buffer;
+	int ret;
+
+	ret = spi_sync(adis->spi, &adis->msg);
+	if (ret)
+		dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
+
+	if (st->variant->flags & ADIS16400_BURST_DIAG_STAT) {
+		buffer = adis->buffer + sizeof(u16);
+		/*
+		 * The size here is always larger than, or equal to the true
+		 * size of the channel data. This may result in a larger copy
+		 * than necessary, but as the target buffer will be
+		 * buffer->scan_bytes this will be safe.
+		 */
+		iio_push_to_buffers_with_ts_unaligned(indio_dev, buffer,
+						      indio_dev->scan_bytes - sizeof(pf->timestamp),
+						      pf->timestamp);
+	} else {
+		iio_push_to_buffers_with_timestamp(indio_dev,
+						   adis->buffer,
+						   pf->timestamp);
+	}
+
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+#else
+#define adis16400_trigger_handler	NULL
+#endif /* IS_ENABLED(CONFIG_IIO_BUFFER) */
+
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
+	.type = IIO_VOLTAGE, \
+	.indexed = 1, \
+	.channel = chn, \
+	.extend_name = name, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = (si), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_SUPPLY_CHAN(addr, bits) \
+	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
+
+#define ADIS16400_AUX_ADC_CHAN(addr, bits) \
+	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
+
+#define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
+	.type = IIO_ANGL_VEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_CALIBBIAS),		  \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = addr, \
+	.scan_index = ADIS16400_SCAN_GYRO_ ## mod, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_ACCEL_CHAN(mod, addr, bits) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_CALIBBIAS), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = ADIS16400_SCAN_ACC_ ## mod, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_MAGN_CHAN(mod, addr, bits) { \
+	.type = IIO_MAGN, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = ADIS16400_SCAN_MAGN_ ## mod, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_MOD_TEMP_NAME_X "x"
+#define ADIS16400_MOD_TEMP_NAME_Y "y"
+#define ADIS16400_MOD_TEMP_NAME_Z "z"
+
+#define ADIS16400_MOD_TEMP_CHAN(mod, addr, bits) { \
+	.type = IIO_TEMP, \
+	.indexed = 1, \
+	.channel = 0, \
+	.extend_name = ADIS16400_MOD_TEMP_NAME_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_OFFSET) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_type = \
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = ADIS16350_SCAN_TEMP_ ## mod, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_TEMP_CHAN(addr, bits) { \
+	.type = IIO_TEMP, \
+	.indexed = 1, \
+	.channel = 0, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_OFFSET) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = ADIS16350_SCAN_TEMP_X, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS16400_INCLI_CHAN(mod, addr, bits) { \
+	.type = IIO_INCLI, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = (addr), \
+	.scan_index = ADIS16300_SCAN_INCLI_ ## mod, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 0, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+static const struct iio_chan_spec adis16400_channels[] = {
+	ADIS16400_SUPPLY_CHAN(ADIS16400_SUPPLY_OUT, 14),
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Y, ADIS16400_YGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Z, ADIS16400_ZGYRO_OUT, 14),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
+	ADIS16400_MAGN_CHAN(X, ADIS16400_XMAGN_OUT, 14),
+	ADIS16400_MAGN_CHAN(Y, ADIS16400_YMAGN_OUT, 14),
+	ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 14),
+	ADIS16400_TEMP_CHAN(ADIS16400_TEMP_OUT, 12),
+	ADIS16400_AUX_ADC_CHAN(ADIS16400_AUX_ADC, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const struct iio_chan_spec adis16445_channels[] = {
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 16),
+	ADIS16400_GYRO_CHAN(Y, ADIS16400_YGYRO_OUT, 16),
+	ADIS16400_GYRO_CHAN(Z, ADIS16400_ZGYRO_OUT, 16),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 16),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 16),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 16),
+	ADIS16400_TEMP_CHAN(ADIS16448_TEMP_OUT, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const struct iio_chan_spec adis16448_channels[] = {
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 16),
+	ADIS16400_GYRO_CHAN(Y, ADIS16400_YGYRO_OUT, 16),
+	ADIS16400_GYRO_CHAN(Z, ADIS16400_ZGYRO_OUT, 16),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 16),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 16),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 16),
+	ADIS16400_MAGN_CHAN(X, ADIS16400_XMAGN_OUT, 16),
+	ADIS16400_MAGN_CHAN(Y, ADIS16400_YMAGN_OUT, 16),
+	ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 16),
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = ADIS16448_BARO_OUT,
+		.scan_index = ADIS16400_SCAN_BARO,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	ADIS16400_TEMP_CHAN(ADIS16448_TEMP_OUT, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const struct iio_chan_spec adis16350_channels[] = {
+	ADIS16400_SUPPLY_CHAN(ADIS16400_SUPPLY_OUT, 12),
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Y, ADIS16400_YGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Z, ADIS16400_ZGYRO_OUT, 14),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
+	ADIS16400_MAGN_CHAN(X, ADIS16400_XMAGN_OUT, 14),
+	ADIS16400_MAGN_CHAN(Y, ADIS16400_YMAGN_OUT, 14),
+	ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 14),
+	ADIS16400_AUX_ADC_CHAN(ADIS16300_AUX_ADC, 12),
+	ADIS16400_MOD_TEMP_CHAN(X, ADIS16350_XTEMP_OUT, 12),
+	ADIS16400_MOD_TEMP_CHAN(Y, ADIS16350_YTEMP_OUT, 12),
+	ADIS16400_MOD_TEMP_CHAN(Z, ADIS16350_ZTEMP_OUT, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const struct iio_chan_spec adis16300_channels[] = {
+	ADIS16400_SUPPLY_CHAN(ADIS16400_SUPPLY_OUT, 12),
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 14),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
+	ADIS16400_TEMP_CHAN(ADIS16350_XTEMP_OUT, 12),
+	ADIS16400_AUX_ADC_CHAN(ADIS16300_AUX_ADC, 12),
+	ADIS16400_INCLI_CHAN(X, ADIS16300_PITCH_OUT, 13),
+	ADIS16400_INCLI_CHAN(Y, ADIS16300_ROLL_OUT, 13),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const struct iio_chan_spec adis16334_channels[] = {
+	ADIS16400_GYRO_CHAN(X, ADIS16400_XGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Y, ADIS16400_YGYRO_OUT, 14),
+	ADIS16400_GYRO_CHAN(Z, ADIS16400_ZGYRO_OUT, 14),
+	ADIS16400_ACCEL_CHAN(X, ADIS16400_XACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
+	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
+	ADIS16400_TEMP_CHAN(ADIS16350_XTEMP_OUT, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
+};
+
+static const char * const adis16400_status_error_msgs[] = {
+	[ADIS16400_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
+	[ADIS16400_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
+	[ADIS16400_DIAG_STAT_XACCL_FAIL] = "X-axis accelerometer self-test failure",
+	[ADIS16400_DIAG_STAT_XGYRO_FAIL] = "X-axis gyroscope self-test failure",
+	[ADIS16400_DIAG_STAT_YGYRO_FAIL] = "Y-axis gyroscope self-test failure",
+	[ADIS16400_DIAG_STAT_ZGYRO_FAIL] = "Z-axis gyroscope self-test failure",
+	[ADIS16400_DIAG_STAT_ALARM2] = "Alarm 2 active",
+	[ADIS16400_DIAG_STAT_ALARM1] = "Alarm 1 active",
+	[ADIS16400_DIAG_STAT_FLASH_CHK] = "Flash checksum error",
+	[ADIS16400_DIAG_STAT_SELF_TEST] = "Self test error",
+	[ADIS16400_DIAG_STAT_OVERFLOW] = "Sensor overrange",
+	[ADIS16400_DIAG_STAT_SPI_FAIL] = "SPI failure",
+	[ADIS16400_DIAG_STAT_FLASH_UPT] = "Flash update failed",
+	[ADIS16400_DIAG_STAT_POWER_HIGH] = "Power supply above 5.25V",
+	[ADIS16400_DIAG_STAT_POWER_LOW] = "Power supply below 4.75V",
+};
+
+#define ADIS16400_DATA(_timeouts, _burst_len)				\
+{									\
+	.msc_ctrl_reg = ADIS16400_MSC_CTRL,				\
+	.glob_cmd_reg = ADIS16400_GLOB_CMD,				\
+	.diag_stat_reg = ADIS16400_DIAG_STAT,				\
+	.read_delay = 50,						\
+	.write_delay = 50,						\
+	.self_test_mask = ADIS16400_MSC_CTRL_MEM_TEST,			\
+	.self_test_reg = ADIS16400_MSC_CTRL,				\
+	.status_error_msgs = adis16400_status_error_msgs,		\
+	.status_error_mask = BIT(ADIS16400_DIAG_STAT_ZACCL_FAIL) |	\
+		BIT(ADIS16400_DIAG_STAT_YACCL_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_XACCL_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_XGYRO_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_YGYRO_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_ZGYRO_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_ALARM2) |			\
+		BIT(ADIS16400_DIAG_STAT_ALARM1) |			\
+		BIT(ADIS16400_DIAG_STAT_FLASH_CHK) |			\
+		BIT(ADIS16400_DIAG_STAT_SELF_TEST) |			\
+		BIT(ADIS16400_DIAG_STAT_OVERFLOW) |			\
+		BIT(ADIS16400_DIAG_STAT_SPI_FAIL) |			\
+		BIT(ADIS16400_DIAG_STAT_FLASH_UPT) |			\
+		BIT(ADIS16400_DIAG_STAT_POWER_HIGH) |			\
+		BIT(ADIS16400_DIAG_STAT_POWER_LOW),			\
+	.timeouts = (_timeouts),					\
+	.burst_reg_cmd = ADIS16400_GLOB_CMD,				\
+	.burst_len = (_burst_len),					\
+	.burst_max_speed_hz = ADIS16400_SPI_BURST			\
+}
+
+static const struct adis_timeout adis16300_timeouts = {
+	.reset_ms = ADIS16400_STARTUP_DELAY,
+	.sw_reset_ms = ADIS16400_STARTUP_DELAY,
+	.self_test_ms = ADIS16400_STARTUP_DELAY,
+};
+
+static const struct adis_timeout adis16334_timeouts = {
+	.reset_ms = 60,
+	.sw_reset_ms = 60,
+	.self_test_ms = 14,
+};
+
+static const struct adis_timeout adis16362_timeouts = {
+	.reset_ms = 130,
+	.sw_reset_ms = 130,
+	.self_test_ms = 12,
+};
+
+static const struct adis_timeout adis16400_timeouts = {
+	.reset_ms = 170,
+	.sw_reset_ms = 170,
+	.self_test_ms = 12,
+};
+
+static const struct adis_timeout adis16445_timeouts = {
+	.reset_ms = 55,
+	.sw_reset_ms = 55,
+	.self_test_ms = 16,
+};
+
+static const struct adis_timeout adis16448_timeouts = {
+	.reset_ms = 90,
+	.sw_reset_ms = 90,
+	.self_test_ms = 45,
+};
+
+static struct adis16400_chip_info adis16400_chips[] = {
+	[ADIS16300] = {
+		.channels = adis16300_channels,
+		.num_channels = ARRAY_SIZE(adis16300_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = 5884,
+		.temp_scale_nano = 140000000, /* 0.14 C */
+		.temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16300_timeouts, 18),
+	},
+	[ADIS16334] = {
+		.channels = adis16334_channels,
+		.num_channels = ARRAY_SIZE(adis16334_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_NO_BURST |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+		.temp_scale_nano = 67850000, /* 0.06785 C */
+		.temp_offset = 25000000 / 67850, /* 25 C = 0x00 */
+		.set_freq = adis16334_set_freq,
+		.get_freq = adis16334_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16334_timeouts, 0),
+	},
+	[ADIS16350] = {
+		.channels = adis16350_channels,
+		.num_channels = ARRAY_SIZE(adis16350_channels),
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(73260), /* 0.07326 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(2522), /* 0.002522 g */
+		.temp_scale_nano = 145300000, /* 0.1453 C */
+		.temp_offset = 25000000 / 145300, /* 25 C = 0x00 */
+		.flags = ADIS16400_NO_BURST | ADIS16400_HAS_SLOW_MODE,
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16300_timeouts, 0),
+	},
+	[ADIS16360] = {
+		.channels = adis16350_channels,
+		.num_channels = ARRAY_SIZE(adis16350_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
+		.temp_scale_nano = 136000000, /* 0.136 C */
+		.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16300_timeouts, 28),
+	},
+	[ADIS16362] = {
+		.channels = adis16350_channels,
+		.num_channels = ARRAY_SIZE(adis16350_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */
+		.temp_scale_nano = 136000000, /* 0.136 C */
+		.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16362_timeouts, 28),
+	},
+	[ADIS16364] = {
+		.channels = adis16350_channels,
+		.num_channels = ARRAY_SIZE(adis16350_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+		.temp_scale_nano = 136000000, /* 0.136 C */
+		.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16362_timeouts, 28),
+	},
+	[ADIS16367] = {
+		.channels = adis16350_channels,
+		.num_channels = ARRAY_SIZE(adis16350_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE |
+				ADIS16400_HAS_SERIAL_NUMBER,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(2000), /* 0.2 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
+		.temp_scale_nano = 136000000, /* 0.136 C */
+		.temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16300_timeouts, 28),
+	},
+	[ADIS16400] = {
+		.channels = adis16400_channels,
+		.num_channels = ARRAY_SIZE(adis16400_channels),
+		.flags = ADIS16400_HAS_PROD_ID | ADIS16400_HAS_SLOW_MODE,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
+		.temp_scale_nano = 140000000, /* 0.14 C */
+		.temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
+		.set_freq = adis16400_set_freq,
+		.get_freq = adis16400_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16400_timeouts, 24),
+	},
+	[ADIS16445] = {
+		.channels = adis16445_channels,
+		.num_channels = ARRAY_SIZE(adis16445_channels),
+		.flags = ADIS16400_HAS_PROD_ID |
+				ADIS16400_HAS_SERIAL_NUMBER |
+				ADIS16400_BURST_DIAG_STAT,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(10000), /* 0.01 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(250), /* 1/4000 g */
+		.temp_scale_nano = 73860000, /* 0.07386 C */
+		.temp_offset = 31000000 / 73860, /* 31 C = 0x00 */
+		.set_freq = adis16334_set_freq,
+		.get_freq = adis16334_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16445_timeouts, 16),
+	},
+	[ADIS16448] = {
+		.channels = adis16448_channels,
+		.num_channels = ARRAY_SIZE(adis16448_channels),
+		.flags = ADIS16400_HAS_PROD_ID |
+				ADIS16400_HAS_SERIAL_NUMBER |
+				ADIS16400_BURST_DIAG_STAT,
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(40000), /* 0.04 deg/s */
+		.accel_scale_micro = IIO_G_TO_M_S_2(833), /* 1/1200 g */
+		.temp_scale_nano = 73860000, /* 0.07386 C */
+		.temp_offset = 31000000 / 73860, /* 31 C = 0x00 */
+		.set_freq = adis16334_set_freq,
+		.get_freq = adis16334_get_freq,
+		.adis_data = ADIS16400_DATA(&adis16448_timeouts, 24),
+	}
+};
+
+static const struct iio_info adis16400_info = {
+	.read_raw = &adis16400_read_raw,
+	.write_raw = &adis16400_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static void adis16400_setup_chan_mask(struct adis16400_state *st)
+{
+	const struct adis16400_chip_info *chip_info = st->variant;
+	unsigned int i;
+
+	for (i = 0; i < chip_info->num_channels; i++) {
+		const struct iio_chan_spec *ch = &chip_info->channels[i];
+
+		if (ch->scan_index >= 0 &&
+		    ch->scan_index != ADIS16400_SCAN_TIMESTAMP)
+			st->avail_scan_mask[0] |= BIT(ch->scan_index);
+	}
+}
+
+static void adis16400_stop(void *data)
+{
+	adis16400_stop_device(data);
+}
+
+static int adis16400_probe(struct spi_device *spi)
+{
+	struct adis16400_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+	const struct adis_data *adis16400_data;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	/* setup the industrialio driver allocated elements */
+	st->variant = &adis16400_chips[spi_get_device_id(spi)->driver_data];
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = st->variant->channels;
+	indio_dev->num_channels = st->variant->num_channels;
+	indio_dev->info = &adis16400_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (!(st->variant->flags & ADIS16400_NO_BURST)) {
+		adis16400_setup_chan_mask(st);
+		indio_dev->available_scan_masks = st->avail_scan_mask;
+	}
+
+	adis16400_data = &st->variant->adis_data;
+
+	ret = adis_init(&st->adis, indio_dev, spi, adis16400_data);
+	if (ret)
+		return ret;
+
+	ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, adis16400_trigger_handler);
+	if (ret)
+		return ret;
+
+	/* Get the device into a sane initial state */
+	ret = adis16400_initial_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, adis16400_stop, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	adis16400_debugfs_init(indio_dev);
+	return 0;
+}
+
+static const struct spi_device_id adis16400_id[] = {
+	{"adis16300", ADIS16300},
+	{"adis16305", ADIS16300},
+	{"adis16334", ADIS16334},
+	{"adis16350", ADIS16350},
+	{"adis16354", ADIS16350},
+	{"adis16355", ADIS16350},
+	{"adis16360", ADIS16360},
+	{"adis16362", ADIS16362},
+	{"adis16364", ADIS16364},
+	{"adis16365", ADIS16360},
+	{"adis16367", ADIS16367},
+	{"adis16400", ADIS16400},
+	{"adis16405", ADIS16400},
+	{"adis16445", ADIS16445},
+	{"adis16448", ADIS16448},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adis16400_id);
+
+static struct spi_driver adis16400_driver = {
+	.driver = {
+		.name = "adis16400",
+	},
+	.id_table = adis16400_id,
+	.probe = adis16400_probe,
+};
+module_spi_driver(adis16400_driver);
+
+MODULE_AUTHOR("Manuel Stahl <manuel.stahl@iis.fraunhofer.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16400/5 IMU SPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
new file mode 100644
index 0000000000..69facd72bd
--- /dev/null
+++ b/drivers/iio/imu/adis16460.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADIS16460 IMU driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16460_REG_FLASH_CNT		0x00
+#define ADIS16460_REG_DIAG_STAT		0x02
+#define ADIS16460_REG_X_GYRO_LOW	0x04
+#define ADIS16460_REG_X_GYRO_OUT	0x06
+#define ADIS16460_REG_Y_GYRO_LOW	0x08
+#define ADIS16460_REG_Y_GYRO_OUT	0x0A
+#define ADIS16460_REG_Z_GYRO_LOW	0x0C
+#define ADIS16460_REG_Z_GYRO_OUT	0x0E
+#define ADIS16460_REG_X_ACCL_LOW	0x10
+#define ADIS16460_REG_X_ACCL_OUT	0x12
+#define ADIS16460_REG_Y_ACCL_LOW	0x14
+#define ADIS16460_REG_Y_ACCL_OUT	0x16
+#define ADIS16460_REG_Z_ACCL_LOW	0x18
+#define ADIS16460_REG_Z_ACCL_OUT	0x1A
+#define ADIS16460_REG_SMPL_CNTR		0x1C
+#define ADIS16460_REG_TEMP_OUT		0x1E
+#define ADIS16460_REG_X_DELT_ANG	0x24
+#define ADIS16460_REG_Y_DELT_ANG	0x26
+#define ADIS16460_REG_Z_DELT_ANG	0x28
+#define ADIS16460_REG_X_DELT_VEL	0x2A
+#define ADIS16460_REG_Y_DELT_VEL	0x2C
+#define ADIS16460_REG_Z_DELT_VEL	0x2E
+#define ADIS16460_REG_MSC_CTRL		0x32
+#define ADIS16460_REG_SYNC_SCAL		0x34
+#define ADIS16460_REG_DEC_RATE		0x36
+#define ADIS16460_REG_FLTR_CTRL		0x38
+#define ADIS16460_REG_GLOB_CMD		0x3E
+#define ADIS16460_REG_X_GYRO_OFF	0x40
+#define ADIS16460_REG_Y_GYRO_OFF	0x42
+#define ADIS16460_REG_Z_GYRO_OFF	0x44
+#define ADIS16460_REG_X_ACCL_OFF	0x46
+#define ADIS16460_REG_Y_ACCL_OFF	0x48
+#define ADIS16460_REG_Z_ACCL_OFF	0x4A
+#define ADIS16460_REG_LOT_ID1		0x52
+#define ADIS16460_REG_LOT_ID2		0x54
+#define ADIS16460_REG_PROD_ID		0x56
+#define ADIS16460_REG_SERIAL_NUM	0x58
+#define ADIS16460_REG_CAL_SGNTR		0x60
+#define ADIS16460_REG_CAL_CRC		0x62
+#define ADIS16460_REG_CODE_SGNTR	0x64
+#define ADIS16460_REG_CODE_CRC		0x66
+
+struct adis16460_chip_info {
+	unsigned int num_channels;
+	const struct iio_chan_spec *channels;
+	unsigned int gyro_max_val;
+	unsigned int gyro_max_scale;
+	unsigned int accel_max_val;
+	unsigned int accel_max_scale;
+};
+
+struct adis16460 {
+	const struct adis16460_chip_info *chip_info;
+	struct adis adis;
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static int adis16460_show_serial_number(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u16 serial;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_SERIAL_NUM,
+		&serial);
+	if (ret)
+		return ret;
+
+	*val = serial;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_serial_number_fops,
+		adis16460_show_serial_number, NULL, "0x%.4llx\n");
+
+static int adis16460_show_product_id(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u16 prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_PROD_ID,
+		&prod_id);
+	if (ret)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_product_id_fops,
+		adis16460_show_product_id, NULL, "%llu\n");
+
+static int adis16460_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u32 flash_count;
+	int ret;
+
+	ret = adis_read_reg_32(&adis16460->adis, ADIS16460_REG_FLASH_CNT,
+		&flash_count);
+	if (ret)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_flash_count_fops,
+		adis16460_show_flash_count, NULL, "%lld\n");
+
+static int adis16460_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16460 *adis16460 = iio_priv(indio_dev);
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+
+	debugfs_create_file_unsafe("serial_number", 0400,
+			d, adis16460, &adis16460_serial_number_fops);
+	debugfs_create_file_unsafe("product_id", 0400,
+			d, adis16460, &adis16460_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+			d, adis16460, &adis16460_flash_count_fops);
+
+	return 0;
+}
+
+#else
+
+static int adis16460_debugfs_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+#endif
+
+static int adis16460_set_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+	int t;
+
+	t =  val * 1000 + val2 / 1000;
+	if (t <= 0)
+		return -EINVAL;
+
+	t = 2048000 / t;
+	if (t > 2048)
+		t = 2048;
+
+	if (t != 0)
+		t--;
+
+	return adis_write_reg_16(&st->adis, ADIS16460_REG_DEC_RATE, t);
+}
+
+static int adis16460_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+	uint16_t t;
+	int ret;
+	unsigned int freq;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16460_REG_DEC_RATE, &t);
+	if (ret)
+		return ret;
+
+	freq = 2048000 / (t + 1);
+	*val = freq / 1000;
+	*val2 = (freq % 1000) * 1000;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int adis16460_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = st->chip_info->gyro_max_scale;
+			*val2 = st->chip_info->gyro_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ACCEL:
+			*val = st->chip_info->accel_max_scale;
+			*val2 = st->chip_info->accel_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			*val = 50; /* 50 milli degrees Celsius/LSB */
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 500; /* 25 degrees Celsius = 0x0000 */
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16460_get_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16460_write_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16460_set_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+enum {
+	ADIS16460_SCAN_GYRO_X,
+	ADIS16460_SCAN_GYRO_Y,
+	ADIS16460_SCAN_GYRO_Z,
+	ADIS16460_SCAN_ACCEL_X,
+	ADIS16460_SCAN_ACCEL_Y,
+	ADIS16460_SCAN_ACCEL_Z,
+	ADIS16460_SCAN_TEMP,
+};
+
+#define ADIS16460_MOD_CHANNEL(_type, _mod, _address, _si, _bits) \
+	{ \
+		.type = (_type), \
+		.modified = 1, \
+		.channel2 = (_mod), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = (_address), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = (_bits), \
+			.storagebits = (_bits), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define ADIS16460_GYRO_CHANNEL(_mod) \
+	ADIS16460_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
+	ADIS16460_REG_ ## _mod ## _GYRO_LOW, ADIS16460_SCAN_GYRO_ ## _mod, \
+	32)
+
+#define ADIS16460_ACCEL_CHANNEL(_mod) \
+	ADIS16460_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \
+	ADIS16460_REG_ ## _mod ## _ACCL_LOW, ADIS16460_SCAN_ACCEL_ ## _mod, \
+	32)
+
+#define ADIS16460_TEMP_CHANNEL() { \
+		.type = IIO_TEMP, \
+		.indexed = 1, \
+		.channel = 0, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_SCALE) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = ADIS16460_REG_TEMP_OUT, \
+		.scan_index = ADIS16460_SCAN_TEMP, \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = 16, \
+			.storagebits = 16, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+static const struct iio_chan_spec adis16460_channels[] = {
+	ADIS16460_GYRO_CHANNEL(X),
+	ADIS16460_GYRO_CHANNEL(Y),
+	ADIS16460_GYRO_CHANNEL(Z),
+	ADIS16460_ACCEL_CHANNEL(X),
+	ADIS16460_ACCEL_CHANNEL(Y),
+	ADIS16460_ACCEL_CHANNEL(Z),
+	ADIS16460_TEMP_CHANNEL(),
+	IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+static const struct adis16460_chip_info adis16460_chip_info = {
+	.channels = adis16460_channels,
+	.num_channels = ARRAY_SIZE(adis16460_channels),
+	/*
+	 * storing the value in rad/degree and the scale in degree
+	 * gives us the result in rad and better precession than
+	 * storing the scale directly in rad.
+	 */
+	.gyro_max_val = IIO_RAD_TO_DEGREE(200 << 16),
+	.gyro_max_scale = 1,
+	.accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+	.accel_max_scale = 5,
+};
+
+static const struct iio_info adis16460_info = {
+	.read_raw = &adis16460_read_raw,
+	.write_raw = &adis16460_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+#define ADIS16460_DIAG_STAT_IN_CLK_OOS	7
+#define ADIS16460_DIAG_STAT_FLASH_MEM	6
+#define ADIS16460_DIAG_STAT_SELF_TEST	5
+#define ADIS16460_DIAG_STAT_OVERRANGE	4
+#define ADIS16460_DIAG_STAT_SPI_COMM	3
+#define ADIS16460_DIAG_STAT_FLASH_UPT	2
+
+static const char * const adis16460_status_error_msgs[] = {
+	[ADIS16460_DIAG_STAT_IN_CLK_OOS] = "Input clock out of sync",
+	[ADIS16460_DIAG_STAT_FLASH_MEM] = "Flash memory failure",
+	[ADIS16460_DIAG_STAT_SELF_TEST] = "Self test diagnostic failure",
+	[ADIS16460_DIAG_STAT_OVERRANGE] = "Sensor overrange",
+	[ADIS16460_DIAG_STAT_SPI_COMM] = "SPI communication failure",
+	[ADIS16460_DIAG_STAT_FLASH_UPT] = "Flash update failure",
+};
+
+static const struct adis_timeout adis16460_timeouts = {
+	.reset_ms = 225,
+	.sw_reset_ms = 225,
+	.self_test_ms = 10,
+};
+
+static const struct adis_data adis16460_data = {
+	.diag_stat_reg = ADIS16460_REG_DIAG_STAT,
+	.glob_cmd_reg = ADIS16460_REG_GLOB_CMD,
+	.prod_id_reg = ADIS16460_REG_PROD_ID,
+	.prod_id = 16460,
+	.self_test_mask = BIT(2),
+	.self_test_reg = ADIS16460_REG_GLOB_CMD,
+	.has_paging = false,
+	.read_delay = 5,
+	.write_delay = 5,
+	.cs_change_delay = 16,
+	.status_error_msgs = adis16460_status_error_msgs,
+	.status_error_mask = BIT(ADIS16460_DIAG_STAT_IN_CLK_OOS) |
+		BIT(ADIS16460_DIAG_STAT_FLASH_MEM) |
+		BIT(ADIS16460_DIAG_STAT_SELF_TEST) |
+		BIT(ADIS16460_DIAG_STAT_OVERRANGE) |
+		BIT(ADIS16460_DIAG_STAT_SPI_COMM) |
+		BIT(ADIS16460_DIAG_STAT_FLASH_UPT),
+	.unmasked_drdy = true,
+	.timeouts = &adis16460_timeouts,
+};
+
+static int adis16460_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adis16460 *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->chip_info = &adis16460_chip_info;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	indio_dev->info = &adis16460_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = adis_init(&st->adis, indio_dev, spi, &adis16460_data);
+	if (ret)
+		return ret;
+
+	ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
+	if (ret)
+		return ret;
+
+	ret = __adis_initial_startup(&st->adis);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	adis16460_debugfs_init(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id adis16460_ids[] = {
+	{ "adis16460", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adis16460_ids);
+
+static const struct of_device_id adis16460_of_match[] = {
+	{ .compatible = "adi,adis16460" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adis16460_of_match);
+
+static struct spi_driver adis16460_driver = {
+	.driver = {
+		.name = "adis16460",
+		.of_match_table = adis16460_of_match,
+	},
+	.id_table = adis16460_ids,
+	.probe = adis16460_probe,
+};
+module_spi_driver(adis16460_driver);
+
+MODULE_AUTHOR("Dragos Bogdan <dragos.bogdan@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16460 IMU driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c
new file mode 100644
index 0000000000..6c81dc5bf2
--- /dev/null
+++ b/drivers/iio/imu/adis16475.c
@@ -0,0 +1,1383 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADIS16475 IMU driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/irq.h>
+#include <linux/lcm.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+
+#define ADIS16475_REG_DIAG_STAT		0x02
+#define ADIS16475_REG_X_GYRO_L		0x04
+#define ADIS16475_REG_Y_GYRO_L		0x08
+#define ADIS16475_REG_Z_GYRO_L		0x0C
+#define ADIS16475_REG_X_ACCEL_L		0x10
+#define ADIS16475_REG_Y_ACCEL_L		0x14
+#define ADIS16475_REG_Z_ACCEL_L		0x18
+#define ADIS16475_REG_TEMP_OUT		0x1c
+#define ADIS16475_REG_X_GYRO_BIAS_L	0x40
+#define ADIS16475_REG_Y_GYRO_BIAS_L	0x44
+#define ADIS16475_REG_Z_GYRO_BIAS_L	0x48
+#define ADIS16475_REG_X_ACCEL_BIAS_L	0x4c
+#define ADIS16475_REG_Y_ACCEL_BIAS_L	0x50
+#define ADIS16475_REG_Z_ACCEL_BIAS_L	0x54
+#define ADIS16475_REG_FILT_CTRL		0x5c
+#define ADIS16475_FILT_CTRL_MASK	GENMASK(2, 0)
+#define ADIS16475_FILT_CTRL(x)		FIELD_PREP(ADIS16475_FILT_CTRL_MASK, x)
+#define ADIS16475_REG_MSG_CTRL		0x60
+#define ADIS16475_MSG_CTRL_DR_POL_MASK	BIT(0)
+#define ADIS16475_MSG_CTRL_DR_POL(x) \
+				FIELD_PREP(ADIS16475_MSG_CTRL_DR_POL_MASK, x)
+#define ADIS16475_SYNC_MODE_MASK	GENMASK(4, 2)
+#define ADIS16475_SYNC_MODE(x)		FIELD_PREP(ADIS16475_SYNC_MODE_MASK, x)
+#define ADIS16475_REG_UP_SCALE		0x62
+#define ADIS16475_REG_DEC_RATE		0x64
+#define ADIS16475_REG_GLOB_CMD		0x68
+#define ADIS16475_REG_FIRM_REV		0x6c
+#define ADIS16475_REG_FIRM_DM		0x6e
+#define ADIS16475_REG_FIRM_Y		0x70
+#define ADIS16475_REG_PROD_ID		0x72
+#define ADIS16475_REG_SERIAL_NUM	0x74
+#define ADIS16475_REG_FLASH_CNT		0x7c
+#define ADIS16500_BURST32_MASK		BIT(9)
+#define ADIS16500_BURST32(x)		FIELD_PREP(ADIS16500_BURST32_MASK, x)
+/* number of data elements in burst mode */
+#define ADIS16475_BURST32_MAX_DATA	32
+#define ADIS16475_BURST_MAX_DATA	20
+#define ADIS16475_MAX_SCAN_DATA		20
+/* spi max speed in brust mode */
+#define ADIS16475_BURST_MAX_SPEED	1000000
+#define ADIS16475_LSB_DEC_MASK		0
+#define ADIS16475_LSB_FIR_MASK		1
+
+enum {
+	ADIS16475_SYNC_DIRECT = 1,
+	ADIS16475_SYNC_SCALED,
+	ADIS16475_SYNC_OUTPUT,
+	ADIS16475_SYNC_PULSE = 5,
+};
+
+struct adis16475_sync {
+	u16 sync_mode;
+	u16 min_rate;
+	u16 max_rate;
+};
+
+struct adis16475_chip_info {
+	const struct iio_chan_spec *channels;
+	const struct adis16475_sync *sync;
+	const struct adis_data adis_data;
+	const char *name;
+	u32 num_channels;
+	u32 gyro_max_val;
+	u32 gyro_max_scale;
+	u32 accel_max_val;
+	u32 accel_max_scale;
+	u32 temp_scale;
+	u32 int_clk;
+	u16 max_dec;
+	u8 num_sync;
+	bool has_burst32;
+};
+
+struct adis16475 {
+	const struct adis16475_chip_info *info;
+	struct adis adis;
+	u32 clk_freq;
+	bool burst32;
+	unsigned long lsb_flag;
+	u16 sync_mode;
+	/* Alignment needed for the timestamp */
+	__be16 data[ADIS16475_MAX_SCAN_DATA] __aligned(8);
+};
+
+enum {
+	ADIS16475_SCAN_GYRO_X,
+	ADIS16475_SCAN_GYRO_Y,
+	ADIS16475_SCAN_GYRO_Z,
+	ADIS16475_SCAN_ACCEL_X,
+	ADIS16475_SCAN_ACCEL_Y,
+	ADIS16475_SCAN_ACCEL_Z,
+	ADIS16475_SCAN_TEMP,
+};
+
+static bool low_rate_allow;
+module_param(low_rate_allow, bool, 0444);
+MODULE_PARM_DESC(low_rate_allow,
+		 "Allow IMU rates below the minimum advisable when external clk is used in SCALED mode (default: N)");
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t adis16475_show_firmware_revision(struct file *file,
+						char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct adis16475 *st = file->private_data;
+	char buf[7];
+	size_t len;
+	u16 rev;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_REV, &rev);
+	if (ret)
+		return ret;
+
+	len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16475_firmware_revision_fops = {
+	.open = simple_open,
+	.read = adis16475_show_firmware_revision,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static ssize_t adis16475_show_firmware_date(struct file *file,
+					    char __user *userbuf,
+					    size_t count, loff_t *ppos)
+{
+	struct adis16475 *st = file->private_data;
+	u16 md, year;
+	char buf[12];
+	size_t len;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_Y, &year);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_DM, &md);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", md >> 8, md & 0xff,
+		       year);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16475_firmware_date_fops = {
+	.open = simple_open,
+	.read = adis16475_show_firmware_date,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static int adis16475_show_serial_number(void *arg, u64 *val)
+{
+	struct adis16475 *st = arg;
+	u16 serial;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_SERIAL_NUM, &serial);
+	if (ret)
+		return ret;
+
+	*val = serial;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16475_serial_number_fops,
+			 adis16475_show_serial_number, NULL, "0x%.4llx\n");
+
+static int adis16475_show_product_id(void *arg, u64 *val)
+{
+	struct adis16475 *st = arg;
+	u16 prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_PROD_ID, &prod_id);
+	if (ret)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16475_product_id_fops,
+			 adis16475_show_product_id, NULL, "%llu\n");
+
+static int adis16475_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16475 *st = arg;
+	u32 flash_count;
+	int ret;
+
+	ret = adis_read_reg_32(&st->adis, ADIS16475_REG_FLASH_CNT,
+			       &flash_count);
+	if (ret)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16475_flash_count_fops,
+			 adis16475_show_flash_count, NULL, "%lld\n");
+
+static void adis16475_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16475 *st = iio_priv(indio_dev);
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+
+	debugfs_create_file_unsafe("serial_number", 0400,
+				   d, st, &adis16475_serial_number_fops);
+	debugfs_create_file_unsafe("product_id", 0400,
+				   d, st, &adis16475_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+				   d, st, &adis16475_flash_count_fops);
+	debugfs_create_file("firmware_revision", 0400,
+			    d, st, &adis16475_firmware_revision_fops);
+	debugfs_create_file("firmware_date", 0400, d,
+			    st, &adis16475_firmware_date_fops);
+}
+#else
+static void adis16475_debugfs_init(struct iio_dev *indio_dev)
+{
+}
+#endif
+
+static int adis16475_get_freq(struct adis16475 *st, u32 *freq)
+{
+	int ret;
+	u16 dec;
+	u32 sample_rate = st->clk_freq;
+
+	adis_dev_lock(&st->adis);
+
+	if (st->sync_mode == ADIS16475_SYNC_SCALED) {
+		u16 sync_scale;
+
+		ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, &sync_scale);
+		if (ret)
+			goto error;
+
+		sample_rate = st->clk_freq * sync_scale;
+	}
+
+	ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, &dec);
+	if (ret)
+		goto error;
+
+	adis_dev_unlock(&st->adis);
+
+	*freq = DIV_ROUND_CLOSEST(sample_rate, dec + 1);
+
+	return 0;
+error:
+	adis_dev_unlock(&st->adis);
+	return ret;
+}
+
+static int adis16475_set_freq(struct adis16475 *st, const u32 freq)
+{
+	u16 dec;
+	int ret;
+	u32 sample_rate = st->clk_freq;
+
+	if (!freq)
+		return -EINVAL;
+
+	adis_dev_lock(&st->adis);
+	/*
+	 * When using sync scaled mode, the input clock needs to be scaled so that we have
+	 * an IMU sample rate between (optimally) 1900 and 2100. After this, we can use the
+	 * decimation filter to lower the sampling rate in order to get what the user wants.
+	 * Optimally, the user sample rate is a multiple of both the IMU sample rate and
+	 * the input clock. Hence, calculating the sync_scale dynamically gives us better
+	 * chances of achieving a perfect/integer value for DEC_RATE. The math here is:
+	 *	1. lcm of the input clock and the desired output rate.
+	 *	2. get the highest multiple of the previous result lower than the adis max rate.
+	 *	3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE
+	 *	   and DEC_RATE (to get the user output rate)
+	 */
+	if (st->sync_mode == ADIS16475_SYNC_SCALED) {
+		unsigned long scaled_rate = lcm(st->clk_freq, freq);
+		int sync_scale;
+
+		/*
+		 * If lcm is bigger than the IMU maximum sampling rate there's no perfect
+		 * solution. In this case, we get the highest multiple of the input clock
+		 * lower than the IMU max sample rate.
+		 */
+		if (scaled_rate > 2100000)
+			scaled_rate = 2100000 / st->clk_freq * st->clk_freq;
+		else
+			scaled_rate = 2100000 / scaled_rate * scaled_rate;
+
+		/*
+		 * This is not an hard requirement but it's not advised to run the IMU
+		 * with a sample rate lower than 1900Hz due to possible undersampling
+		 * issues. However, there are users that might really want to take the risk.
+		 * Hence, we provide a module parameter for them. If set, we allow sample
+		 * rates lower than 1.9KHz. By default, we won't allow this and we just roundup
+		 * the rate to the next multiple of the input clock bigger than 1.9KHz. This
+		 * is done like this as in some cases (when DEC_RATE is 0) might give
+		 * us the closest value to the one desired by the user...
+		 */
+		if (scaled_rate < 1900000 && !low_rate_allow)
+			scaled_rate = roundup(1900000, st->clk_freq);
+
+		sync_scale = scaled_rate / st->clk_freq;
+		ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, sync_scale);
+		if (ret)
+			goto error;
+
+		sample_rate = scaled_rate;
+	}
+
+	dec = DIV_ROUND_CLOSEST(sample_rate, freq);
+
+	if (dec)
+		dec--;
+
+	if (dec > st->info->max_dec)
+		dec = st->info->max_dec;
+
+	ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec);
+	if (ret)
+		goto error;
+
+	adis_dev_unlock(&st->adis);
+	/*
+	 * If decimation is used, then gyro and accel data will have meaningful
+	 * bits on the LSB registers. This info is used on the trigger handler.
+	 */
+	assign_bit(ADIS16475_LSB_DEC_MASK, &st->lsb_flag, dec);
+
+	return 0;
+error:
+	adis_dev_unlock(&st->adis);
+	return ret;
+}
+
+/* The values are approximated. */
+static const u32 adis16475_3db_freqs[] = {
+	[0] = 720, /* Filter disabled, full BW (~720Hz) */
+	[1] = 360,
+	[2] = 164,
+	[3] = 80,
+	[4] = 40,
+	[5] = 20,
+	[6] = 10,
+};
+
+static int adis16475_get_filter(struct adis16475 *st, u32 *filter)
+{
+	u16 filter_sz;
+	int ret;
+	const int mask = ADIS16475_FILT_CTRL_MASK;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, &filter_sz);
+	if (ret)
+		return ret;
+
+	*filter = adis16475_3db_freqs[filter_sz & mask];
+
+	return 0;
+}
+
+static int adis16475_set_filter(struct adis16475 *st, const u32 filter)
+{
+	int i = ARRAY_SIZE(adis16475_3db_freqs);
+	int ret;
+
+	while (--i) {
+		if (adis16475_3db_freqs[i] >= filter)
+			break;
+	}
+
+	ret = adis_write_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL,
+				ADIS16475_FILT_CTRL(i));
+	if (ret)
+		return ret;
+
+	/*
+	 * If FIR is used, then gyro and accel data will have meaningful
+	 * bits on the LSB registers. This info is used on the trigger handler.
+	 */
+	assign_bit(ADIS16475_LSB_FIR_MASK, &st->lsb_flag, i);
+
+	return 0;
+}
+
+static const u32 adis16475_calib_regs[] = {
+	[ADIS16475_SCAN_GYRO_X] = ADIS16475_REG_X_GYRO_BIAS_L,
+	[ADIS16475_SCAN_GYRO_Y] = ADIS16475_REG_Y_GYRO_BIAS_L,
+	[ADIS16475_SCAN_GYRO_Z] = ADIS16475_REG_Z_GYRO_BIAS_L,
+	[ADIS16475_SCAN_ACCEL_X] = ADIS16475_REG_X_ACCEL_BIAS_L,
+	[ADIS16475_SCAN_ACCEL_Y] = ADIS16475_REG_Y_ACCEL_BIAS_L,
+	[ADIS16475_SCAN_ACCEL_Z] = ADIS16475_REG_Z_ACCEL_BIAS_L,
+};
+
+static int adis16475_read_raw(struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan,
+			      int *val, int *val2, long info)
+{
+	struct adis16475 *st = iio_priv(indio_dev);
+	int ret;
+	u32 tmp;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = st->info->gyro_max_val;
+			*val2 = st->info->gyro_max_scale;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ACCEL:
+			*val = st->info->accel_max_val;
+			*val2 = st->info->accel_max_scale;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			*val = st->info->temp_scale;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = adis_read_reg_32(&st->adis,
+				       adis16475_calib_regs[chan->scan_index],
+				       val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		ret = adis16475_get_filter(st, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = adis16475_get_freq(st, &tmp);
+		if (ret)
+			return ret;
+
+		*val = tmp / 1000;
+		*val2 = (tmp % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16475_write_raw(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       int val, int val2, long info)
+{
+	struct adis16475 *st = iio_priv(indio_dev);
+	u32 tmp;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		tmp = val * 1000 + val2 / 1000;
+		return adis16475_set_freq(st, tmp);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return adis16475_set_filter(st, val);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return adis_write_reg_32(&st->adis,
+					 adis16475_calib_regs[chan->scan_index],
+					 val);
+	default:
+		return -EINVAL;
+	}
+}
+
+#define ADIS16475_MOD_CHAN(_type, _mod, _address, _si, _r_bits, _s_bits) \
+	{ \
+		.type = (_type), \
+		.modified = 1, \
+		.channel2 = (_mod), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_CALIBBIAS), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+		.address = (_address), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = (_r_bits), \
+			.storagebits = (_s_bits), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define ADIS16475_GYRO_CHANNEL(_mod) \
+	ADIS16475_MOD_CHAN(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
+			   ADIS16475_REG_ ## _mod ## _GYRO_L, \
+			   ADIS16475_SCAN_GYRO_ ## _mod, 32, 32)
+
+#define ADIS16475_ACCEL_CHANNEL(_mod) \
+	ADIS16475_MOD_CHAN(IIO_ACCEL, IIO_MOD_ ## _mod, \
+			   ADIS16475_REG_ ## _mod ## _ACCEL_L, \
+			   ADIS16475_SCAN_ACCEL_ ## _mod, 32, 32)
+
+#define ADIS16475_TEMP_CHANNEL() { \
+		.type = IIO_TEMP, \
+		.indexed = 1, \
+		.channel = 0, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+		.address = ADIS16475_REG_TEMP_OUT, \
+		.scan_index = ADIS16475_SCAN_TEMP, \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = 16, \
+			.storagebits = 16, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+static const struct iio_chan_spec adis16475_channels[] = {
+	ADIS16475_GYRO_CHANNEL(X),
+	ADIS16475_GYRO_CHANNEL(Y),
+	ADIS16475_GYRO_CHANNEL(Z),
+	ADIS16475_ACCEL_CHANNEL(X),
+	ADIS16475_ACCEL_CHANNEL(Y),
+	ADIS16475_ACCEL_CHANNEL(Z),
+	ADIS16475_TEMP_CHANNEL(),
+	IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+enum adis16475_variant {
+	ADIS16470,
+	ADIS16475_1,
+	ADIS16475_2,
+	ADIS16475_3,
+	ADIS16477_1,
+	ADIS16477_2,
+	ADIS16477_3,
+	ADIS16465_1,
+	ADIS16465_2,
+	ADIS16465_3,
+	ADIS16467_1,
+	ADIS16467_2,
+	ADIS16467_3,
+	ADIS16500,
+	ADIS16505_1,
+	ADIS16505_2,
+	ADIS16505_3,
+	ADIS16507_1,
+	ADIS16507_2,
+	ADIS16507_3,
+};
+
+enum {
+	ADIS16475_DIAG_STAT_DATA_PATH = 1,
+	ADIS16475_DIAG_STAT_FLASH_MEM,
+	ADIS16475_DIAG_STAT_SPI,
+	ADIS16475_DIAG_STAT_STANDBY,
+	ADIS16475_DIAG_STAT_SENSOR,
+	ADIS16475_DIAG_STAT_MEMORY,
+	ADIS16475_DIAG_STAT_CLK,
+};
+
+static const char * const adis16475_status_error_msgs[] = {
+	[ADIS16475_DIAG_STAT_DATA_PATH] = "Data Path Overrun",
+	[ADIS16475_DIAG_STAT_FLASH_MEM] = "Flash memory update failure",
+	[ADIS16475_DIAG_STAT_SPI] = "SPI communication error",
+	[ADIS16475_DIAG_STAT_STANDBY] = "Standby mode",
+	[ADIS16475_DIAG_STAT_SENSOR] = "Sensor failure",
+	[ADIS16475_DIAG_STAT_MEMORY] = "Memory failure",
+	[ADIS16475_DIAG_STAT_CLK] = "Clock error",
+};
+
+#define ADIS16475_DATA(_prod_id, _timeouts)				\
+{									\
+	.msc_ctrl_reg = ADIS16475_REG_MSG_CTRL,				\
+	.glob_cmd_reg = ADIS16475_REG_GLOB_CMD,				\
+	.diag_stat_reg = ADIS16475_REG_DIAG_STAT,			\
+	.prod_id_reg = ADIS16475_REG_PROD_ID,				\
+	.prod_id = (_prod_id),						\
+	.self_test_mask = BIT(2),					\
+	.self_test_reg = ADIS16475_REG_GLOB_CMD,			\
+	.cs_change_delay = 16,						\
+	.read_delay = 5,						\
+	.write_delay = 5,						\
+	.status_error_msgs = adis16475_status_error_msgs,		\
+	.status_error_mask = BIT(ADIS16475_DIAG_STAT_DATA_PATH) |	\
+		BIT(ADIS16475_DIAG_STAT_FLASH_MEM) |			\
+		BIT(ADIS16475_DIAG_STAT_SPI) |				\
+		BIT(ADIS16475_DIAG_STAT_STANDBY) |			\
+		BIT(ADIS16475_DIAG_STAT_SENSOR) |			\
+		BIT(ADIS16475_DIAG_STAT_MEMORY) |			\
+		BIT(ADIS16475_DIAG_STAT_CLK),				\
+	.unmasked_drdy = true,						\
+	.timeouts = (_timeouts),					\
+	.burst_reg_cmd = ADIS16475_REG_GLOB_CMD,			\
+	.burst_len = ADIS16475_BURST_MAX_DATA,				\
+	.burst_max_len = ADIS16475_BURST32_MAX_DATA,			\
+	.burst_max_speed_hz = ADIS16475_BURST_MAX_SPEED			\
+}
+
+static const struct adis16475_sync adis16475_sync_mode[] = {
+	{ ADIS16475_SYNC_OUTPUT },
+	{ ADIS16475_SYNC_DIRECT, 1900, 2100 },
+	{ ADIS16475_SYNC_SCALED, 1, 128 },
+	{ ADIS16475_SYNC_PULSE, 1000, 2100 },
+};
+
+static const struct adis_timeout adis16475_timeouts = {
+	.reset_ms = 200,
+	.sw_reset_ms = 200,
+	.self_test_ms = 20,
+};
+
+static const struct adis_timeout adis1650x_timeouts = {
+	.reset_ms = 260,
+	.sw_reset_ms = 260,
+	.self_test_ms = 30,
+};
+
+static const struct adis16475_chip_info adis16475_chip_info[] = {
+	[ADIS16470] = {
+		.name = "adis16470",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16470, &adis16475_timeouts),
+	},
+	[ADIS16475_1] = {
+		.name = "adis16475-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
+	},
+	[ADIS16475_2] = {
+		.name = "adis16475-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
+	},
+	[ADIS16475_3] = {
+		.name = "adis16475-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
+	},
+	[ADIS16477_1] = {
+		.name = "adis16477-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
+	},
+	[ADIS16477_2] = {
+		.name = "adis16477-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
+	},
+	[ADIS16477_3] = {
+		.name = "adis16477-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
+	},
+	[ADIS16465_1] = {
+		.name = "adis16465-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
+	},
+	[ADIS16465_2] = {
+		.name = "adis16465-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
+	},
+	[ADIS16465_3] = {
+		.name = "adis16465-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
+	},
+	[ADIS16467_1] = {
+		.name = "adis16467-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
+	},
+	[ADIS16467_2] = {
+		.name = "adis16467-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
+	},
+	[ADIS16467_3] = {
+		.name = "adis16467-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 1,
+		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
+		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
+	},
+	[ADIS16500] = {
+		.name = "adis16500",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 392,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts),
+	},
+	[ADIS16505_1] = {
+		.name = "adis16505-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 78,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
+	},
+	[ADIS16505_2] = {
+		.name = "adis16505-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 78,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
+	},
+	[ADIS16505_3] = {
+		.name = "adis16505-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 78,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
+	},
+	[ADIS16507_1] = {
+		.name = "adis16507-1",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
+		.accel_max_val = 392,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
+	},
+	[ADIS16507_2] = {
+		.name = "adis16507-2",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
+		.accel_max_val = 392,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
+	},
+	[ADIS16507_3] = {
+		.name = "adis16507-3",
+		.num_channels = ARRAY_SIZE(adis16475_channels),
+		.channels = adis16475_channels,
+		.gyro_max_val = 1,
+		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
+		.accel_max_val = 392,
+		.accel_max_scale = 32000 << 16,
+		.temp_scale = 100,
+		.int_clk = 2000,
+		.max_dec = 1999,
+		.sync = adis16475_sync_mode,
+		/* pulse sync not supported */
+		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
+		.has_burst32 = true,
+		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
+	},
+};
+
+static const struct iio_info adis16475_info = {
+	.read_raw = &adis16475_read_raw,
+	.write_raw = &adis16475_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static bool adis16475_validate_crc(const u8 *buffer, u16 crc,
+				   const bool burst32)
+{
+	int i;
+	/* extra 6 elements for low gyro and accel */
+	const u16 sz = burst32 ? ADIS16475_BURST32_MAX_DATA :
+		ADIS16475_BURST_MAX_DATA;
+
+	for (i = 0; i < sz - 2; i++)
+		crc -= buffer[i];
+
+	return crc == 0;
+}
+
+static void adis16475_burst32_check(struct adis16475 *st)
+{
+	int ret;
+	struct adis *adis = &st->adis;
+
+	if (!st->info->has_burst32)
+		return;
+
+	if (st->lsb_flag && !st->burst32) {
+		const u16 en = ADIS16500_BURST32(1);
+
+		ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
+					 ADIS16500_BURST32_MASK, en);
+		if (ret)
+			return;
+
+		st->burst32 = true;
+
+		/*
+		 * In 32-bit mode we need extra 2 bytes for all gyro
+		 * and accel channels.
+		 */
+		adis->burst_extra_len = 6 * sizeof(u16);
+		adis->xfer[1].len += 6 * sizeof(u16);
+		dev_dbg(&adis->spi->dev, "Enable burst32 mode, xfer:%d",
+			adis->xfer[1].len);
+
+	} else if (!st->lsb_flag && st->burst32) {
+		const u16 en = ADIS16500_BURST32(0);
+
+		ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
+					 ADIS16500_BURST32_MASK, en);
+		if (ret)
+			return;
+
+		st->burst32 = false;
+
+		/* Remove the extra bits */
+		adis->burst_extra_len = 0;
+		adis->xfer[1].len -= 6 * sizeof(u16);
+		dev_dbg(&adis->spi->dev, "Disable burst32 mode, xfer:%d\n",
+			adis->xfer[1].len);
+	}
+}
+
+static irqreturn_t adis16475_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adis16475 *st = iio_priv(indio_dev);
+	struct adis *adis = &st->adis;
+	int ret, bit, i = 0;
+	__be16 *buffer;
+	u16 crc;
+	bool valid;
+	/* offset until the first element after gyro and accel */
+	const u8 offset = st->burst32 ? 13 : 7;
+
+	ret = spi_sync(adis->spi, &adis->msg);
+	if (ret)
+		goto check_burst32;
+
+	buffer = adis->buffer;
+
+	crc = be16_to_cpu(buffer[offset + 2]);
+	valid = adis16475_validate_crc(adis->buffer, crc, st->burst32);
+	if (!valid) {
+		dev_err(&adis->spi->dev, "Invalid crc\n");
+		goto check_burst32;
+	}
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		/*
+		 * When burst mode is used, system flags is the first data
+		 * channel in the sequence, but the scan index is 7.
+		 */
+		switch (bit) {
+		case ADIS16475_SCAN_TEMP:
+			st->data[i++] = buffer[offset];
+			break;
+		case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z:
+			/*
+			 * The first 2 bytes on the received data are the
+			 * DIAG_STAT reg, hence the +1 offset here...
+			 */
+			if (st->burst32) {
+				/* upper 16 */
+				st->data[i++] = buffer[bit * 2 + 2];
+				/* lower 16 */
+				st->data[i++] = buffer[bit * 2 + 1];
+			} else {
+				st->data[i++] = buffer[bit + 1];
+				/*
+				 * Don't bother in doing the manual read if the
+				 * device supports burst32. burst32 will be
+				 * enabled in the next call to
+				 * adis16475_burst32_check()...
+				 */
+				if (st->lsb_flag && !st->info->has_burst32) {
+					u16 val = 0;
+					const u32 reg = ADIS16475_REG_X_GYRO_L +
+						bit * 4;
+
+					adis_read_reg_16(adis, reg, &val);
+					st->data[i++] = cpu_to_be16(val);
+				} else {
+					/* lower not used */
+					st->data[i++] = 0;
+				}
+			}
+			break;
+		}
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp);
+check_burst32:
+	/*
+	 * We only check the burst mode at the end of the current capture since
+	 * it takes a full data ready cycle for the device to update the burst
+	 * array.
+	 */
+	adis16475_burst32_check(st);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int adis16475_config_sync_mode(struct adis16475 *st)
+{
+	int ret;
+	struct device *dev = &st->adis.spi->dev;
+	const struct adis16475_sync *sync;
+	u32 sync_mode;
+
+	/* default to internal clk */
+	st->clk_freq = st->info->int_clk * 1000;
+
+	ret = device_property_read_u32(dev, "adi,sync-mode", &sync_mode);
+	if (ret)
+		return 0;
+
+	if (sync_mode >= st->info->num_sync) {
+		dev_err(dev, "Invalid sync mode: %u for %s\n", sync_mode,
+			st->info->name);
+		return -EINVAL;
+	}
+
+	sync = &st->info->sync[sync_mode];
+	st->sync_mode = sync->sync_mode;
+
+	/* All the other modes require external input signal */
+	if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) {
+		struct clk *clk = devm_clk_get_enabled(dev, NULL);
+
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+
+		st->clk_freq = clk_get_rate(clk);
+		if (st->clk_freq < sync->min_rate ||
+		    st->clk_freq > sync->max_rate) {
+			dev_err(dev,
+				"Clk rate:%u not in a valid range:[%u %u]\n",
+				st->clk_freq, sync->min_rate, sync->max_rate);
+			return -EINVAL;
+		}
+
+		if (sync->sync_mode == ADIS16475_SYNC_SCALED) {
+			u16 up_scale;
+
+			/*
+			 * In sync scaled mode, the IMU sample rate is the clk_freq * sync_scale.
+			 * Hence, default the IMU sample rate to the highest multiple of the input
+			 * clock lower than the IMU max sample rate. The optimal range is
+			 * 1900-2100 sps...
+			 */
+			up_scale = 2100 / st->clk_freq;
+
+			ret = __adis_write_reg_16(&st->adis,
+						  ADIS16475_REG_UP_SCALE,
+						  up_scale);
+			if (ret)
+				return ret;
+		}
+
+		st->clk_freq *= 1000;
+	}
+	/*
+	 * Keep in mind that the mask for the clk modes in adis1650*
+	 * chips is different (1100 instead of 11100). However, we
+	 * are not configuring BIT(4) in these chips and the default
+	 * value is 0, so we are fine in doing the below operations.
+	 * I'm keeping this for simplicity and avoiding extra variables
+	 * in chip_info.
+	 */
+	ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
+				 ADIS16475_SYNC_MODE_MASK, sync->sync_mode);
+	if (ret)
+		return ret;
+
+	usleep_range(250, 260);
+
+	return 0;
+}
+
+static int adis16475_config_irq_pin(struct adis16475 *st)
+{
+	int ret;
+	struct irq_data *desc;
+	u32 irq_type;
+	u16 val = 0;
+	u8 polarity;
+	struct spi_device *spi = st->adis.spi;
+
+	desc = irq_get_irq_data(spi->irq);
+	if (!desc) {
+		dev_err(&spi->dev, "Could not find IRQ %d\n", spi->irq);
+		return -EINVAL;
+	}
+	/*
+	 * It is possible to configure the data ready polarity. Furthermore, we
+	 * need to update the adis struct if we want data ready as active low.
+	 */
+	irq_type = irqd_get_trigger_type(desc);
+	if (irq_type == IRQ_TYPE_EDGE_RISING) {
+		polarity = 1;
+		st->adis.irq_flag = IRQF_TRIGGER_RISING;
+	} else if (irq_type == IRQ_TYPE_EDGE_FALLING) {
+		polarity = 0;
+		st->adis.irq_flag = IRQF_TRIGGER_FALLING;
+	} else {
+		dev_err(&spi->dev, "Invalid interrupt type 0x%x specified\n",
+			irq_type);
+		return -EINVAL;
+	}
+
+	val = ADIS16475_MSG_CTRL_DR_POL(polarity);
+	ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
+				 ADIS16475_MSG_CTRL_DR_POL_MASK, val);
+	if (ret)
+		return ret;
+	/*
+	 * There is a delay writing to any bits written to the MSC_CTRL
+	 * register. It should not be bigger than 200us, so 250 should be more
+	 * than enough!
+	 */
+	usleep_range(250, 260);
+
+	return 0;
+}
+
+
+static int adis16475_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adis16475 *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->info = spi_get_device_match_data(spi);
+	if (!st->info)
+		return -EINVAL;
+
+	ret = adis_init(&st->adis, indio_dev, spi, &st->info->adis_data);
+	if (ret)
+		return ret;
+
+	indio_dev->name = st->info->name;
+	indio_dev->channels = st->info->channels;
+	indio_dev->num_channels = st->info->num_channels;
+	indio_dev->info = &adis16475_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = __adis_initial_startup(&st->adis);
+	if (ret)
+		return ret;
+
+	ret = adis16475_config_irq_pin(st);
+	if (ret)
+		return ret;
+
+	ret = adis16475_config_sync_mode(st);
+	if (ret)
+		return ret;
+
+	ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
+						 adis16475_trigger_handler);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	adis16475_debugfs_init(indio_dev);
+
+	return 0;
+}
+
+static const struct of_device_id adis16475_of_match[] = {
+	{ .compatible = "adi,adis16470",
+		.data = &adis16475_chip_info[ADIS16470] },
+	{ .compatible = "adi,adis16475-1",
+		.data = &adis16475_chip_info[ADIS16475_1] },
+	{ .compatible = "adi,adis16475-2",
+		.data = &adis16475_chip_info[ADIS16475_2] },
+	{ .compatible = "adi,adis16475-3",
+		.data = &adis16475_chip_info[ADIS16475_3] },
+	{ .compatible = "adi,adis16477-1",
+		.data = &adis16475_chip_info[ADIS16477_1] },
+	{ .compatible = "adi,adis16477-2",
+		.data = &adis16475_chip_info[ADIS16477_2] },
+	{ .compatible = "adi,adis16477-3",
+		.data = &adis16475_chip_info[ADIS16477_3] },
+	{ .compatible = "adi,adis16465-1",
+		.data = &adis16475_chip_info[ADIS16465_1] },
+	{ .compatible = "adi,adis16465-2",
+		.data = &adis16475_chip_info[ADIS16465_2] },
+	{ .compatible = "adi,adis16465-3",
+		.data = &adis16475_chip_info[ADIS16465_3] },
+	{ .compatible = "adi,adis16467-1",
+		.data = &adis16475_chip_info[ADIS16467_1] },
+	{ .compatible = "adi,adis16467-2",
+		.data = &adis16475_chip_info[ADIS16467_2] },
+	{ .compatible = "adi,adis16467-3",
+		.data = &adis16475_chip_info[ADIS16467_3] },
+	{ .compatible = "adi,adis16500",
+		.data = &adis16475_chip_info[ADIS16500] },
+	{ .compatible = "adi,adis16505-1",
+		.data = &adis16475_chip_info[ADIS16505_1] },
+	{ .compatible = "adi,adis16505-2",
+		.data = &adis16475_chip_info[ADIS16505_2] },
+	{ .compatible = "adi,adis16505-3",
+		.data = &adis16475_chip_info[ADIS16505_3] },
+	{ .compatible = "adi,adis16507-1",
+		.data = &adis16475_chip_info[ADIS16507_1] },
+	{ .compatible = "adi,adis16507-2",
+		.data = &adis16475_chip_info[ADIS16507_2] },
+	{ .compatible = "adi,adis16507-3",
+		.data = &adis16475_chip_info[ADIS16507_3] },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adis16475_of_match);
+
+static const struct spi_device_id adis16475_ids[] = {
+	{ "adis16470", (kernel_ulong_t)&adis16475_chip_info[ADIS16470] },
+	{ "adis16475-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_1] },
+	{ "adis16475-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_2] },
+	{ "adis16475-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_3] },
+	{ "adis16477-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_1] },
+	{ "adis16477-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_2] },
+	{ "adis16477-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_3] },
+	{ "adis16465-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_1] },
+	{ "adis16465-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_2] },
+	{ "adis16465-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_3] },
+	{ "adis16467-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_1] },
+	{ "adis16467-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_2] },
+	{ "adis16467-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_3] },
+	{ "adis16500", (kernel_ulong_t)&adis16475_chip_info[ADIS16500] },
+	{ "adis16505-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_1] },
+	{ "adis16505-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_2] },
+	{ "adis16505-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_3] },
+	{ "adis16507-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_1] },
+	{ "adis16507-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_2] },
+	{ "adis16507-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_3] },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adis16475_ids);
+
+static struct spi_driver adis16475_driver = {
+	.driver = {
+		.name = "adis16475",
+		.of_match_table = adis16475_of_match,
+	},
+	.probe = adis16475_probe,
+	.id_table = adis16475_ids,
+};
+module_spi_driver(adis16475_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16475 IMU driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
new file mode 100644
index 0000000000..fe520194a8
--- /dev/null
+++ b/drivers/iio/imu/adis16480.c
@@ -0,0 +1,1536 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADIS16480 and similar IMUs driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/bitfield.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/math.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/lcm.h>
+#include <linux/property.h>
+#include <linux/swab.h>
+#include <linux/crc32.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16480_PAGE_SIZE 0x80
+
+#define ADIS16480_REG(page, reg) ((page) * ADIS16480_PAGE_SIZE + (reg))
+
+#define ADIS16480_REG_PAGE_ID 0x00 /* Same address on each page */
+#define ADIS16480_REG_SEQ_CNT			ADIS16480_REG(0x00, 0x06)
+#define ADIS16480_REG_SYS_E_FLA			ADIS16480_REG(0x00, 0x08)
+#define ADIS16480_REG_DIAG_STS			ADIS16480_REG(0x00, 0x0A)
+#define ADIS16480_REG_ALM_STS			ADIS16480_REG(0x00, 0x0C)
+#define ADIS16480_REG_TEMP_OUT			ADIS16480_REG(0x00, 0x0E)
+#define ADIS16480_REG_X_GYRO_OUT		ADIS16480_REG(0x00, 0x10)
+#define ADIS16480_REG_Y_GYRO_OUT		ADIS16480_REG(0x00, 0x14)
+#define ADIS16480_REG_Z_GYRO_OUT		ADIS16480_REG(0x00, 0x18)
+#define ADIS16480_REG_X_ACCEL_OUT		ADIS16480_REG(0x00, 0x1C)
+#define ADIS16480_REG_Y_ACCEL_OUT		ADIS16480_REG(0x00, 0x20)
+#define ADIS16480_REG_Z_ACCEL_OUT		ADIS16480_REG(0x00, 0x24)
+#define ADIS16480_REG_X_MAGN_OUT		ADIS16480_REG(0x00, 0x28)
+#define ADIS16480_REG_Y_MAGN_OUT		ADIS16480_REG(0x00, 0x2A)
+#define ADIS16480_REG_Z_MAGN_OUT		ADIS16480_REG(0x00, 0x2C)
+#define ADIS16480_REG_BAROM_OUT			ADIS16480_REG(0x00, 0x2E)
+#define ADIS16480_REG_X_DELTAANG_OUT		ADIS16480_REG(0x00, 0x40)
+#define ADIS16480_REG_Y_DELTAANG_OUT		ADIS16480_REG(0x00, 0x44)
+#define ADIS16480_REG_Z_DELTAANG_OUT		ADIS16480_REG(0x00, 0x48)
+#define ADIS16480_REG_X_DELTAVEL_OUT		ADIS16480_REG(0x00, 0x4C)
+#define ADIS16480_REG_Y_DELTAVEL_OUT		ADIS16480_REG(0x00, 0x50)
+#define ADIS16480_REG_Z_DELTAVEL_OUT		ADIS16480_REG(0x00, 0x54)
+#define ADIS16480_REG_PROD_ID			ADIS16480_REG(0x00, 0x7E)
+
+#define ADIS16480_REG_X_GYRO_SCALE		ADIS16480_REG(0x02, 0x04)
+#define ADIS16480_REG_Y_GYRO_SCALE		ADIS16480_REG(0x02, 0x06)
+#define ADIS16480_REG_Z_GYRO_SCALE		ADIS16480_REG(0x02, 0x08)
+#define ADIS16480_REG_X_ACCEL_SCALE		ADIS16480_REG(0x02, 0x0A)
+#define ADIS16480_REG_Y_ACCEL_SCALE		ADIS16480_REG(0x02, 0x0C)
+#define ADIS16480_REG_Z_ACCEL_SCALE		ADIS16480_REG(0x02, 0x0E)
+#define ADIS16480_REG_X_GYRO_BIAS		ADIS16480_REG(0x02, 0x10)
+#define ADIS16480_REG_Y_GYRO_BIAS		ADIS16480_REG(0x02, 0x14)
+#define ADIS16480_REG_Z_GYRO_BIAS		ADIS16480_REG(0x02, 0x18)
+#define ADIS16480_REG_X_ACCEL_BIAS		ADIS16480_REG(0x02, 0x1C)
+#define ADIS16480_REG_Y_ACCEL_BIAS		ADIS16480_REG(0x02, 0x20)
+#define ADIS16480_REG_Z_ACCEL_BIAS		ADIS16480_REG(0x02, 0x24)
+#define ADIS16480_REG_X_HARD_IRON		ADIS16480_REG(0x02, 0x28)
+#define ADIS16480_REG_Y_HARD_IRON		ADIS16480_REG(0x02, 0x2A)
+#define ADIS16480_REG_Z_HARD_IRON		ADIS16480_REG(0x02, 0x2C)
+#define ADIS16480_REG_BAROM_BIAS		ADIS16480_REG(0x02, 0x40)
+#define ADIS16480_REG_FLASH_CNT			ADIS16480_REG(0x02, 0x7C)
+
+#define ADIS16480_REG_GLOB_CMD			ADIS16480_REG(0x03, 0x02)
+#define ADIS16480_REG_FNCTIO_CTRL		ADIS16480_REG(0x03, 0x06)
+#define ADIS16480_REG_GPIO_CTRL			ADIS16480_REG(0x03, 0x08)
+#define ADIS16480_REG_CONFIG			ADIS16480_REG(0x03, 0x0A)
+#define ADIS16480_REG_DEC_RATE			ADIS16480_REG(0x03, 0x0C)
+#define ADIS16480_REG_SLP_CNT			ADIS16480_REG(0x03, 0x10)
+#define ADIS16480_REG_FILTER_BNK0		ADIS16480_REG(0x03, 0x16)
+#define ADIS16480_REG_FILTER_BNK1		ADIS16480_REG(0x03, 0x18)
+#define ADIS16480_REG_ALM_CNFG0			ADIS16480_REG(0x03, 0x20)
+#define ADIS16480_REG_ALM_CNFG1			ADIS16480_REG(0x03, 0x22)
+#define ADIS16480_REG_ALM_CNFG2			ADIS16480_REG(0x03, 0x24)
+#define ADIS16480_REG_XG_ALM_MAGN		ADIS16480_REG(0x03, 0x28)
+#define ADIS16480_REG_YG_ALM_MAGN		ADIS16480_REG(0x03, 0x2A)
+#define ADIS16480_REG_ZG_ALM_MAGN		ADIS16480_REG(0x03, 0x2C)
+#define ADIS16480_REG_XA_ALM_MAGN		ADIS16480_REG(0x03, 0x2E)
+#define ADIS16480_REG_YA_ALM_MAGN		ADIS16480_REG(0x03, 0x30)
+#define ADIS16480_REG_ZA_ALM_MAGN		ADIS16480_REG(0x03, 0x32)
+#define ADIS16480_REG_XM_ALM_MAGN		ADIS16480_REG(0x03, 0x34)
+#define ADIS16480_REG_YM_ALM_MAGN		ADIS16480_REG(0x03, 0x36)
+#define ADIS16480_REG_ZM_ALM_MAGN		ADIS16480_REG(0x03, 0x38)
+#define ADIS16480_REG_BR_ALM_MAGN		ADIS16480_REG(0x03, 0x3A)
+#define ADIS16480_REG_FIRM_REV			ADIS16480_REG(0x03, 0x78)
+#define ADIS16480_REG_FIRM_DM			ADIS16480_REG(0x03, 0x7A)
+#define ADIS16480_REG_FIRM_Y			ADIS16480_REG(0x03, 0x7C)
+
+/*
+ * External clock scaling in PPS mode.
+ * Available only for ADIS1649x devices
+ */
+#define ADIS16495_REG_SYNC_SCALE		ADIS16480_REG(0x03, 0x10)
+#define ADIS16495_REG_BURST_CMD			ADIS16480_REG(0x00, 0x7C)
+#define ADIS16495_BURST_ID			0xA5A5
+/* total number of segments in burst */
+#define ADIS16495_BURST_MAX_DATA		20
+/* spi max speed in burst mode */
+#define ADIS16495_BURST_MAX_SPEED              6000000
+
+#define ADIS16480_REG_SERIAL_NUM		ADIS16480_REG(0x04, 0x20)
+
+/* Each filter coefficent bank spans two pages */
+#define ADIS16480_FIR_COEF(page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \
+		ADIS16480_REG((page) + 1, (x) - 60 + 8))
+#define ADIS16480_FIR_COEF_A(x)			ADIS16480_FIR_COEF(0x05, (x))
+#define ADIS16480_FIR_COEF_B(x)			ADIS16480_FIR_COEF(0x07, (x))
+#define ADIS16480_FIR_COEF_C(x)			ADIS16480_FIR_COEF(0x09, (x))
+#define ADIS16480_FIR_COEF_D(x)			ADIS16480_FIR_COEF(0x0B, (x))
+
+/* ADIS16480_REG_FNCTIO_CTRL */
+#define ADIS16480_DRDY_SEL_MSK		GENMASK(1, 0)
+#define ADIS16480_DRDY_SEL(x)		FIELD_PREP(ADIS16480_DRDY_SEL_MSK, x)
+#define ADIS16480_DRDY_POL_MSK		BIT(2)
+#define ADIS16480_DRDY_POL(x)		FIELD_PREP(ADIS16480_DRDY_POL_MSK, x)
+#define ADIS16480_DRDY_EN_MSK		BIT(3)
+#define ADIS16480_DRDY_EN(x)		FIELD_PREP(ADIS16480_DRDY_EN_MSK, x)
+#define ADIS16480_SYNC_SEL_MSK		GENMASK(5, 4)
+#define ADIS16480_SYNC_SEL(x)		FIELD_PREP(ADIS16480_SYNC_SEL_MSK, x)
+#define ADIS16480_SYNC_EN_MSK		BIT(7)
+#define ADIS16480_SYNC_EN(x)		FIELD_PREP(ADIS16480_SYNC_EN_MSK, x)
+#define ADIS16480_SYNC_MODE_MSK		BIT(8)
+#define ADIS16480_SYNC_MODE(x)		FIELD_PREP(ADIS16480_SYNC_MODE_MSK, x)
+
+struct adis16480_chip_info {
+	unsigned int num_channels;
+	const struct iio_chan_spec *channels;
+	unsigned int gyro_max_val;
+	unsigned int gyro_max_scale;
+	unsigned int accel_max_val;
+	unsigned int accel_max_scale;
+	unsigned int temp_scale;
+	unsigned int int_clk;
+	unsigned int max_dec_rate;
+	const unsigned int *filter_freqs;
+	bool has_pps_clk_mode;
+	bool has_sleep_cnt;
+	const struct adis_data adis_data;
+};
+
+enum adis16480_int_pin {
+	ADIS16480_PIN_DIO1,
+	ADIS16480_PIN_DIO2,
+	ADIS16480_PIN_DIO3,
+	ADIS16480_PIN_DIO4
+};
+
+enum adis16480_clock_mode {
+	ADIS16480_CLK_SYNC,
+	ADIS16480_CLK_PPS,
+	ADIS16480_CLK_INT
+};
+
+struct adis16480 {
+	const struct adis16480_chip_info *chip_info;
+
+	struct adis adis;
+	struct clk *ext_clk;
+	enum adis16480_clock_mode clk_mode;
+	unsigned int clk_freq;
+	/* Alignment needed for the timestamp */
+	__be16 data[ADIS16495_BURST_MAX_DATA] __aligned(8);
+};
+
+static const char * const adis16480_int_pin_names[4] = {
+	[ADIS16480_PIN_DIO1] = "DIO1",
+	[ADIS16480_PIN_DIO2] = "DIO2",
+	[ADIS16480_PIN_DIO3] = "DIO3",
+	[ADIS16480_PIN_DIO4] = "DIO4",
+};
+
+static bool low_rate_allow;
+module_param(low_rate_allow, bool, 0444);
+MODULE_PARM_DESC(low_rate_allow,
+		 "Allow IMU rates below the minimum advisable when external clk is used in PPS mode (default: N)");
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t adis16480_show_firmware_revision(struct file *file,
+		char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct adis16480 *adis16480 = file->private_data;
+	char buf[7];
+	size_t len;
+	u16 rev;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_REV, &rev);
+	if (ret)
+		return ret;
+
+	len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16480_firmware_revision_fops = {
+	.open = simple_open,
+	.read = adis16480_show_firmware_revision,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static ssize_t adis16480_show_firmware_date(struct file *file,
+		char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct adis16480 *adis16480 = file->private_data;
+	u16 md, year;
+	char buf[12];
+	size_t len;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_Y, &year);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_DM, &md);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n",
+			md >> 8, md & 0xff, year);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16480_firmware_date_fops = {
+	.open = simple_open,
+	.read = adis16480_show_firmware_date,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static int adis16480_show_serial_number(void *arg, u64 *val)
+{
+	struct adis16480 *adis16480 = arg;
+	u16 serial;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_SERIAL_NUM,
+		&serial);
+	if (ret)
+		return ret;
+
+	*val = serial;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16480_serial_number_fops,
+	adis16480_show_serial_number, NULL, "0x%.4llx\n");
+
+static int adis16480_show_product_id(void *arg, u64 *val)
+{
+	struct adis16480 *adis16480 = arg;
+	u16 prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_PROD_ID,
+		&prod_id);
+	if (ret)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16480_product_id_fops,
+	adis16480_show_product_id, NULL, "%llu\n");
+
+static int adis16480_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16480 *adis16480 = arg;
+	u32 flash_count;
+	int ret;
+
+	ret = adis_read_reg_32(&adis16480->adis, ADIS16480_REG_FLASH_CNT,
+		&flash_count);
+	if (ret)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16480_flash_count_fops,
+	adis16480_show_flash_count, NULL, "%lld\n");
+
+static int adis16480_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16480 *adis16480 = iio_priv(indio_dev);
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+
+	debugfs_create_file_unsafe("firmware_revision", 0400,
+		d, adis16480, &adis16480_firmware_revision_fops);
+	debugfs_create_file_unsafe("firmware_date", 0400,
+		d, adis16480, &adis16480_firmware_date_fops);
+	debugfs_create_file_unsafe("serial_number", 0400,
+		d, adis16480, &adis16480_serial_number_fops);
+	debugfs_create_file_unsafe("product_id", 0400,
+		d, adis16480, &adis16480_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+		d, adis16480, &adis16480_flash_count_fops);
+
+	return 0;
+}
+
+#else
+
+static int adis16480_debugfs_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+#endif
+
+static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	unsigned int t, sample_rate = st->clk_freq;
+	int ret;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	t =  val * 1000 + val2 / 1000;
+	if (t == 0)
+		return -EINVAL;
+
+	adis_dev_lock(&st->adis);
+	/*
+	 * When using PPS mode, the input clock needs to be scaled so that we have an IMU
+	 * sample rate between (optimally) 4000 and 4250. After this, we can use the
+	 * decimation filter to lower the sampling rate in order to get what the user wants.
+	 * Optimally, the user sample rate is a multiple of both the IMU sample rate and
+	 * the input clock. Hence, calculating the sync_scale dynamically gives us better
+	 * chances of achieving a perfect/integer value for DEC_RATE. The math here is:
+	 *	1. lcm of the input clock and the desired output rate.
+	 *	2. get the highest multiple of the previous result lower than the adis max rate.
+	 *	3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE
+	 *	   and DEC_RATE (to get the user output rate)
+	 */
+	if (st->clk_mode == ADIS16480_CLK_PPS) {
+		unsigned long scaled_rate = lcm(st->clk_freq, t);
+		int sync_scale;
+
+		/*
+		 * If lcm is bigger than the IMU maximum sampling rate there's no perfect
+		 * solution. In this case, we get the highest multiple of the input clock
+		 * lower than the IMU max sample rate.
+		 */
+		if (scaled_rate > st->chip_info->int_clk)
+			scaled_rate = st->chip_info->int_clk / st->clk_freq * st->clk_freq;
+		else
+			scaled_rate = st->chip_info->int_clk / scaled_rate * scaled_rate;
+
+		/*
+		 * This is not an hard requirement but it's not advised to run the IMU
+		 * with a sample rate lower than 4000Hz due to possible undersampling
+		 * issues. However, there are users that might really want to take the risk.
+		 * Hence, we provide a module parameter for them. If set, we allow sample
+		 * rates lower than 4KHz. By default, we won't allow this and we just roundup
+		 * the rate to the next multiple of the input clock bigger than 4KHz. This
+		 * is done like this as in some cases (when DEC_RATE is 0) might give
+		 * us the closest value to the one desired by the user...
+		 */
+		if (scaled_rate < 4000000 && !low_rate_allow)
+			scaled_rate = roundup(4000000, st->clk_freq);
+
+		sync_scale = scaled_rate / st->clk_freq;
+		ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+		if (ret)
+			goto error;
+
+		sample_rate = scaled_rate;
+	}
+
+	t = DIV_ROUND_CLOSEST(sample_rate, t);
+	if (t)
+		t--;
+
+	if (t > st->chip_info->max_dec_rate)
+		t = st->chip_info->max_dec_rate;
+
+	ret = __adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t);
+error:
+	adis_dev_unlock(&st->adis);
+	return ret;
+}
+
+static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	uint16_t t;
+	int ret;
+	unsigned int freq, sample_rate = st->clk_freq;
+
+	adis_dev_lock(&st->adis);
+
+	if (st->clk_mode == ADIS16480_CLK_PPS) {
+		u16 sync_scale;
+
+		ret = __adis_read_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, &sync_scale);
+		if (ret)
+			goto error;
+
+		sample_rate = st->clk_freq * sync_scale;
+	}
+
+	ret = __adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t);
+	if (ret)
+		goto error;
+
+	adis_dev_unlock(&st->adis);
+
+	freq = DIV_ROUND_CLOSEST(sample_rate, (t + 1));
+
+	*val = freq / 1000;
+	*val2 = (freq % 1000) * 1000;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+error:
+	adis_dev_unlock(&st->adis);
+	return ret;
+}
+
+enum {
+	ADIS16480_SCAN_GYRO_X,
+	ADIS16480_SCAN_GYRO_Y,
+	ADIS16480_SCAN_GYRO_Z,
+	ADIS16480_SCAN_ACCEL_X,
+	ADIS16480_SCAN_ACCEL_Y,
+	ADIS16480_SCAN_ACCEL_Z,
+	ADIS16480_SCAN_MAGN_X,
+	ADIS16480_SCAN_MAGN_Y,
+	ADIS16480_SCAN_MAGN_Z,
+	ADIS16480_SCAN_BARO,
+	ADIS16480_SCAN_TEMP,
+};
+
+static const unsigned int adis16480_calibbias_regs[] = {
+	[ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_BIAS,
+	[ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_BIAS,
+	[ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_BIAS,
+	[ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_BIAS,
+	[ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_BIAS,
+	[ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_BIAS,
+	[ADIS16480_SCAN_MAGN_X] = ADIS16480_REG_X_HARD_IRON,
+	[ADIS16480_SCAN_MAGN_Y] = ADIS16480_REG_Y_HARD_IRON,
+	[ADIS16480_SCAN_MAGN_Z] = ADIS16480_REG_Z_HARD_IRON,
+	[ADIS16480_SCAN_BARO] = ADIS16480_REG_BAROM_BIAS,
+};
+
+static const unsigned int adis16480_calibscale_regs[] = {
+	[ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_SCALE,
+	[ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_SCALE,
+	[ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_SCALE,
+	[ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_SCALE,
+	[ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_SCALE,
+	[ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_SCALE,
+};
+
+static int adis16480_set_calibbias(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int bias)
+{
+	unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
+	struct adis16480 *st = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_PRESSURE:
+		if (bias < -0x8000 || bias >= 0x8000)
+			return -EINVAL;
+		return adis_write_reg_16(&st->adis, reg, bias);
+	case IIO_ANGL_VEL:
+	case IIO_ACCEL:
+		return adis_write_reg_32(&st->adis, reg, bias);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int adis16480_get_calibbias(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *bias)
+{
+	unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
+	struct adis16480 *st = iio_priv(indio_dev);
+	uint16_t val16;
+	uint32_t val32;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_PRESSURE:
+		ret = adis_read_reg_16(&st->adis, reg, &val16);
+		if (ret == 0)
+			*bias = sign_extend32(val16, 15);
+		break;
+	case IIO_ANGL_VEL:
+	case IIO_ACCEL:
+		ret = adis_read_reg_32(&st->adis, reg, &val32);
+		if (ret == 0)
+			*bias = sign_extend32(val32, 31);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int adis16480_set_calibscale(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int scale)
+{
+	unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
+	struct adis16480 *st = iio_priv(indio_dev);
+
+	if (scale < -0x8000 || scale >= 0x8000)
+		return -EINVAL;
+
+	return adis_write_reg_16(&st->adis, reg, scale);
+}
+
+static int adis16480_get_calibscale(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *scale)
+{
+	unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
+	struct adis16480 *st = iio_priv(indio_dev);
+	uint16_t val16;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, reg, &val16);
+	if (ret)
+		return ret;
+
+	*scale = sign_extend32(val16, 15);
+	return IIO_VAL_INT;
+}
+
+static const unsigned int adis16480_def_filter_freqs[] = {
+	310,
+	55,
+	275,
+	63,
+};
+
+static const unsigned int adis16495_def_filter_freqs[] = {
+	300,
+	100,
+	300,
+	100,
+};
+
+static const unsigned int ad16480_filter_data[][2] = {
+	[ADIS16480_SCAN_GYRO_X]		= { ADIS16480_REG_FILTER_BNK0, 0 },
+	[ADIS16480_SCAN_GYRO_Y]		= { ADIS16480_REG_FILTER_BNK0, 3 },
+	[ADIS16480_SCAN_GYRO_Z]		= { ADIS16480_REG_FILTER_BNK0, 6 },
+	[ADIS16480_SCAN_ACCEL_X]	= { ADIS16480_REG_FILTER_BNK0, 9 },
+	[ADIS16480_SCAN_ACCEL_Y]	= { ADIS16480_REG_FILTER_BNK0, 12 },
+	[ADIS16480_SCAN_ACCEL_Z]	= { ADIS16480_REG_FILTER_BNK1, 0 },
+	[ADIS16480_SCAN_MAGN_X]		= { ADIS16480_REG_FILTER_BNK1, 3 },
+	[ADIS16480_SCAN_MAGN_Y]		= { ADIS16480_REG_FILTER_BNK1, 6 },
+	[ADIS16480_SCAN_MAGN_Z]		= { ADIS16480_REG_FILTER_BNK1, 9 },
+};
+
+static int adis16480_get_filter_freq(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *freq)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	unsigned int enable_mask, offset, reg;
+	uint16_t val;
+	int ret;
+
+	reg = ad16480_filter_data[chan->scan_index][0];
+	offset = ad16480_filter_data[chan->scan_index][1];
+	enable_mask = BIT(offset + 2);
+
+	ret = adis_read_reg_16(&st->adis, reg, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & enable_mask))
+		*freq = 0;
+	else
+		*freq = st->chip_info->filter_freqs[(val >> offset) & 0x3];
+
+	return IIO_VAL_INT;
+}
+
+static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, unsigned int freq)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	unsigned int enable_mask, offset, reg;
+	unsigned int diff, best_diff;
+	unsigned int i, best_freq;
+	uint16_t val;
+	int ret;
+
+	reg = ad16480_filter_data[chan->scan_index][0];
+	offset = ad16480_filter_data[chan->scan_index][1];
+	enable_mask = BIT(offset + 2);
+
+	adis_dev_lock(&st->adis);
+
+	ret = __adis_read_reg_16(&st->adis, reg, &val);
+	if (ret)
+		goto out_unlock;
+
+	if (freq == 0) {
+		val &= ~enable_mask;
+	} else {
+		best_freq = 0;
+		best_diff = st->chip_info->filter_freqs[0];
+		for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) {
+			if (st->chip_info->filter_freqs[i] >= freq) {
+				diff = st->chip_info->filter_freqs[i] - freq;
+				if (diff < best_diff) {
+					best_diff = diff;
+					best_freq = i;
+				}
+			}
+		}
+
+		val &= ~(0x3 << offset);
+		val |= best_freq << offset;
+		val |= enable_mask;
+	}
+
+	ret = __adis_write_reg_16(&st->adis, reg, val);
+out_unlock:
+	adis_dev_unlock(&st->adis);
+
+	return ret;
+}
+
+static int adis16480_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	unsigned int temp;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = st->chip_info->gyro_max_scale;
+			*val2 = st->chip_info->gyro_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ACCEL:
+			*val = st->chip_info->accel_max_scale;
+			*val2 = st->chip_info->accel_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_MAGN:
+			*val = 0;
+			*val2 = 100; /* 0.0001 gauss */
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			/*
+			 * +85 degrees Celsius = temp_max_scale
+			 * +25 degrees Celsius = 0
+			 * LSB, 25 degrees Celsius  = 60 / temp_max_scale
+			 */
+			*val = st->chip_info->temp_scale / 1000;
+			*val2 = (st->chip_info->temp_scale % 1000) * 1000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_PRESSURE:
+			/*
+			 * max scale is 1310 mbar
+			 * max raw value is 32767 shifted for 32bits
+			 */
+			*val = 131; /* 1310mbar = 131 kPa */
+			*val2 = 32767 << 16;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		/* Only the temperature channel has a offset */
+		temp = 25 * 1000000LL; /* 25 degree Celsius = 0x0000 */
+		*val = DIV_ROUND_CLOSEST_ULL(temp, st->chip_info->temp_scale);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return adis16480_get_calibbias(indio_dev, chan, val);
+	case IIO_CHAN_INFO_CALIBSCALE:
+		return adis16480_get_calibscale(indio_dev, chan, val);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return adis16480_get_filter_freq(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16480_get_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16480_write_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return adis16480_set_calibbias(indio_dev, chan, val);
+	case IIO_CHAN_INFO_CALIBSCALE:
+		return adis16480_set_calibscale(indio_dev, chan, val);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return adis16480_set_filter_freq(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16480_set_freq(indio_dev, val, val2);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+#define ADIS16480_MOD_CHANNEL(_type, _mod, _address, _si, _info_sep, _bits) \
+	{ \
+		.type = (_type), \
+		.modified = 1, \
+		.channel2 = (_mod), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_CALIBBIAS) | \
+			_info_sep, \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = (_address), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = (_bits), \
+			.storagebits = (_bits), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define ADIS16480_GYRO_CHANNEL(_mod) \
+	ADIS16480_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
+	ADIS16480_REG_ ## _mod ## _GYRO_OUT, ADIS16480_SCAN_GYRO_ ## _mod, \
+	BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
+	BIT(IIO_CHAN_INFO_CALIBSCALE), \
+	32)
+
+#define ADIS16480_ACCEL_CHANNEL(_mod) \
+	ADIS16480_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \
+	ADIS16480_REG_ ## _mod ## _ACCEL_OUT, ADIS16480_SCAN_ACCEL_ ## _mod, \
+	BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
+	BIT(IIO_CHAN_INFO_CALIBSCALE), \
+	32)
+
+#define ADIS16480_MAGN_CHANNEL(_mod) \
+	ADIS16480_MOD_CHANNEL(IIO_MAGN, IIO_MOD_ ## _mod, \
+	ADIS16480_REG_ ## _mod ## _MAGN_OUT, ADIS16480_SCAN_MAGN_ ## _mod, \
+	BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	16)
+
+#define ADIS16480_PRESSURE_CHANNEL() \
+	{ \
+		.type = IIO_PRESSURE, \
+		.indexed = 1, \
+		.channel = 0, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_CALIBBIAS) | \
+			BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = ADIS16480_REG_BAROM_OUT, \
+		.scan_index = ADIS16480_SCAN_BARO, \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = 32, \
+			.storagebits = 32, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define ADIS16480_TEMP_CHANNEL() { \
+		.type = IIO_TEMP, \
+		.indexed = 1, \
+		.channel = 0, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_SCALE) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = ADIS16480_REG_TEMP_OUT, \
+		.scan_index = ADIS16480_SCAN_TEMP, \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = 16, \
+			.storagebits = 16, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+static const struct iio_chan_spec adis16480_channels[] = {
+	ADIS16480_GYRO_CHANNEL(X),
+	ADIS16480_GYRO_CHANNEL(Y),
+	ADIS16480_GYRO_CHANNEL(Z),
+	ADIS16480_ACCEL_CHANNEL(X),
+	ADIS16480_ACCEL_CHANNEL(Y),
+	ADIS16480_ACCEL_CHANNEL(Z),
+	ADIS16480_MAGN_CHANNEL(X),
+	ADIS16480_MAGN_CHANNEL(Y),
+	ADIS16480_MAGN_CHANNEL(Z),
+	ADIS16480_PRESSURE_CHANNEL(),
+	ADIS16480_TEMP_CHANNEL(),
+	IIO_CHAN_SOFT_TIMESTAMP(11)
+};
+
+static const struct iio_chan_spec adis16485_channels[] = {
+	ADIS16480_GYRO_CHANNEL(X),
+	ADIS16480_GYRO_CHANNEL(Y),
+	ADIS16480_GYRO_CHANNEL(Z),
+	ADIS16480_ACCEL_CHANNEL(X),
+	ADIS16480_ACCEL_CHANNEL(Y),
+	ADIS16480_ACCEL_CHANNEL(Z),
+	ADIS16480_TEMP_CHANNEL(),
+	IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+enum adis16480_variant {
+	ADIS16375,
+	ADIS16480,
+	ADIS16485,
+	ADIS16488,
+	ADIS16490,
+	ADIS16495_1,
+	ADIS16495_2,
+	ADIS16495_3,
+	ADIS16497_1,
+	ADIS16497_2,
+	ADIS16497_3,
+};
+
+#define ADIS16480_DIAG_STAT_XGYRO_FAIL 0
+#define ADIS16480_DIAG_STAT_YGYRO_FAIL 1
+#define ADIS16480_DIAG_STAT_ZGYRO_FAIL 2
+#define ADIS16480_DIAG_STAT_XACCL_FAIL 3
+#define ADIS16480_DIAG_STAT_YACCL_FAIL 4
+#define ADIS16480_DIAG_STAT_ZACCL_FAIL 5
+#define ADIS16480_DIAG_STAT_XMAGN_FAIL 8
+#define ADIS16480_DIAG_STAT_YMAGN_FAIL 9
+#define ADIS16480_DIAG_STAT_ZMAGN_FAIL 10
+#define ADIS16480_DIAG_STAT_BARO_FAIL 11
+
+static const char * const adis16480_status_error_msgs[] = {
+	[ADIS16480_DIAG_STAT_XGYRO_FAIL] = "X-axis gyroscope self-test failure",
+	[ADIS16480_DIAG_STAT_YGYRO_FAIL] = "Y-axis gyroscope self-test failure",
+	[ADIS16480_DIAG_STAT_ZGYRO_FAIL] = "Z-axis gyroscope self-test failure",
+	[ADIS16480_DIAG_STAT_XACCL_FAIL] = "X-axis accelerometer self-test failure",
+	[ADIS16480_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
+	[ADIS16480_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
+	[ADIS16480_DIAG_STAT_XMAGN_FAIL] = "X-axis magnetometer self-test failure",
+	[ADIS16480_DIAG_STAT_YMAGN_FAIL] = "Y-axis magnetometer self-test failure",
+	[ADIS16480_DIAG_STAT_ZMAGN_FAIL] = "Z-axis magnetometer self-test failure",
+	[ADIS16480_DIAG_STAT_BARO_FAIL] = "Barometer self-test failure",
+};
+
+static int adis16480_enable_irq(struct adis *adis, bool enable);
+
+#define ADIS16480_DATA(_prod_id, _timeouts, _burst_len)			\
+{									\
+	.diag_stat_reg = ADIS16480_REG_DIAG_STS,			\
+	.glob_cmd_reg = ADIS16480_REG_GLOB_CMD,				\
+	.prod_id_reg = ADIS16480_REG_PROD_ID,				\
+	.prod_id = (_prod_id),						\
+	.has_paging = true,						\
+	.read_delay = 5,						\
+	.write_delay = 5,						\
+	.self_test_mask = BIT(1),					\
+	.self_test_reg = ADIS16480_REG_GLOB_CMD,			\
+	.status_error_msgs = adis16480_status_error_msgs,		\
+	.status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) |	\
+		BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) |			\
+		BIT(ADIS16480_DIAG_STAT_BARO_FAIL),			\
+	.enable_irq = adis16480_enable_irq,				\
+	.timeouts = (_timeouts),					\
+	.burst_reg_cmd = ADIS16495_REG_BURST_CMD,			\
+	.burst_len = (_burst_len),					\
+	.burst_max_speed_hz = ADIS16495_BURST_MAX_SPEED			\
+}
+
+static const struct adis_timeout adis16485_timeouts = {
+	.reset_ms = 560,
+	.sw_reset_ms = 120,
+	.self_test_ms = 12,
+};
+
+static const struct adis_timeout adis16480_timeouts = {
+	.reset_ms = 560,
+	.sw_reset_ms = 560,
+	.self_test_ms = 12,
+};
+
+static const struct adis_timeout adis16495_timeouts = {
+	.reset_ms = 170,
+	.sw_reset_ms = 130,
+	.self_test_ms = 40,
+};
+
+static const struct adis_timeout adis16495_1_timeouts = {
+	.reset_ms = 250,
+	.sw_reset_ms = 210,
+	.self_test_ms = 20,
+};
+
+static const struct adis16480_chip_info adis16480_chip_info[] = {
+	[ADIS16375] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		/*
+		 * Typically we do IIO_RAD_TO_DEGREE in the denominator, which
+		 * is exactly the same as IIO_DEGREE_TO_RAD in numerator, since
+		 * it gives better approximation. However, in this case we
+		 * cannot do it since it would not fit in a 32bit variable.
+		 */
+		.gyro_max_val = 22887 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(300),
+		.accel_max_val = IIO_M_S_2_TO_G(21973 << 16),
+		.accel_max_scale = 18,
+		.temp_scale = 5650, /* 5.65 milli degree Celsius */
+		.int_clk = 2460000,
+		.max_dec_rate = 2048,
+		.has_sleep_cnt = true,
+		.filter_freqs = adis16480_def_filter_freqs,
+		.adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0),
+	},
+	[ADIS16480] = {
+		.channels = adis16480_channels,
+		.num_channels = ARRAY_SIZE(adis16480_channels),
+		.gyro_max_val = 22500 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+		.accel_max_val = IIO_M_S_2_TO_G(12500 << 16),
+		.accel_max_scale = 10,
+		.temp_scale = 5650, /* 5.65 milli degree Celsius */
+		.int_clk = 2460000,
+		.max_dec_rate = 2048,
+		.has_sleep_cnt = true,
+		.filter_freqs = adis16480_def_filter_freqs,
+		.adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0),
+	},
+	[ADIS16485] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 22500 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+		.accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+		.accel_max_scale = 5,
+		.temp_scale = 5650, /* 5.65 milli degree Celsius */
+		.int_clk = 2460000,
+		.max_dec_rate = 2048,
+		.has_sleep_cnt = true,
+		.filter_freqs = adis16480_def_filter_freqs,
+		.adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0),
+	},
+	[ADIS16488] = {
+		.channels = adis16480_channels,
+		.num_channels = ARRAY_SIZE(adis16480_channels),
+		.gyro_max_val = 22500 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+		.accel_max_val = IIO_M_S_2_TO_G(22500 << 16),
+		.accel_max_scale = 18,
+		.temp_scale = 5650, /* 5.65 milli degree Celsius */
+		.int_clk = 2460000,
+		.max_dec_rate = 2048,
+		.has_sleep_cnt = true,
+		.filter_freqs = adis16480_def_filter_freqs,
+		.adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0),
+	},
+	[ADIS16490] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 20000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(100),
+		.accel_max_val = IIO_M_S_2_TO_G(16000 << 16),
+		.accel_max_scale = 8,
+		.temp_scale = 14285, /* 14.285 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		.adis_data = ADIS16480_DATA(16490, &adis16495_timeouts, 0),
+	},
+	[ADIS16495_1] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 20000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(125),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 8,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+	[ADIS16495_2] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 18000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 8,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+	[ADIS16495_3] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 20000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(2000),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 8,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+	[ADIS16497_1] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 20000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(125),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 40,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+	[ADIS16497_2] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 18000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 40,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+	[ADIS16497_3] = {
+		.channels = adis16485_channels,
+		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = 20000 << 16,
+		.gyro_max_scale = IIO_DEGREE_TO_RAD(2000),
+		.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
+		.accel_max_scale = 40,
+		.temp_scale = 12500, /* 12.5 milli degree Celsius */
+		.int_clk = 4250000,
+		.max_dec_rate = 4250,
+		.filter_freqs = adis16495_def_filter_freqs,
+		.has_pps_clk_mode = true,
+		/* 20 elements of 16bits */
+		.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
+					    ADIS16495_BURST_MAX_DATA * 2),
+	},
+};
+
+static bool adis16480_validate_crc(const u16 *buf, const u8 n_elem, const u32 crc)
+{
+	u32 crc_calc;
+	u16 crc_buf[15];
+	int j;
+
+	for (j = 0; j < n_elem; j++)
+		crc_buf[j] = swab16(buf[j]);
+
+	crc_calc = crc32(~0, crc_buf, n_elem * 2);
+	crc_calc ^= ~0;
+
+	return (crc == crc_calc);
+}
+
+static irqreturn_t adis16480_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adis16480 *st = iio_priv(indio_dev);
+	struct adis *adis = &st->adis;
+	struct device *dev = &adis->spi->dev;
+	int ret, bit, offset, i = 0;
+	__be16 *buffer;
+	u32 crc;
+	bool valid;
+
+	adis_dev_lock(adis);
+	if (adis->current_page != 0) {
+		adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+		adis->tx[1] = 0;
+		ret = spi_write(adis->spi, adis->tx, 2);
+		if (ret) {
+			dev_err(dev, "Failed to change device page: %d\n", ret);
+			adis_dev_unlock(adis);
+			goto irq_done;
+		}
+
+		adis->current_page = 0;
+	}
+
+	ret = spi_sync(adis->spi, &adis->msg);
+	if (ret) {
+		dev_err(dev, "Failed to read data: %d\n", ret);
+		adis_dev_unlock(adis);
+		goto irq_done;
+	}
+
+	adis_dev_unlock(adis);
+
+	/*
+	 * After making the burst request, the response can have one or two
+	 * 16-bit responses containing the BURST_ID depending on the sclk. If
+	 * clk > 3.6MHz, then we will have two BURST_ID in a row. If clk < 3MHZ,
+	 * we have only one. To manage that variation, we use the transition from the
+	 * BURST_ID to the SYS_E_FLAG register, which will not be equal to 0xA5A5. If
+	 * we not find this variation in the first 4 segments, then the data should
+	 * not be valid.
+	 */
+	buffer = adis->buffer;
+	for (offset = 0; offset < 4; offset++) {
+		u16 curr = be16_to_cpu(buffer[offset]);
+		u16 next = be16_to_cpu(buffer[offset + 1]);
+
+		if (curr == ADIS16495_BURST_ID && next != ADIS16495_BURST_ID) {
+			offset++;
+			break;
+		}
+	}
+
+	if (offset == 4) {
+		dev_err(dev, "Invalid burst data\n");
+		goto irq_done;
+	}
+
+	crc = be16_to_cpu(buffer[offset + 16]) << 16 | be16_to_cpu(buffer[offset + 15]);
+	valid = adis16480_validate_crc((u16 *)&buffer[offset], 15, crc);
+	if (!valid) {
+		dev_err(dev, "Invalid crc\n");
+		goto irq_done;
+	}
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
+		/*
+		 * When burst mode is used, temperature is the first data
+		 * channel in the sequence, but the temperature scan index
+		 * is 10.
+		 */
+		switch (bit) {
+		case ADIS16480_SCAN_TEMP:
+			st->data[i++] = buffer[offset + 1];
+			break;
+		case ADIS16480_SCAN_GYRO_X ... ADIS16480_SCAN_ACCEL_Z:
+			/* The lower register data is sequenced first */
+			st->data[i++] = buffer[2 * bit + offset + 3];
+			st->data[i++] = buffer[2 * bit + offset + 2];
+			break;
+		}
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp);
+irq_done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info adis16480_info = {
+	.read_raw = &adis16480_read_raw,
+	.write_raw = &adis16480_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static int adis16480_stop_device(struct iio_dev *indio_dev)
+{
+	struct adis16480 *st = iio_priv(indio_dev);
+	struct device *dev = &st->adis.spi->dev;
+	int ret;
+
+	ret = adis_write_reg_16(&st->adis, ADIS16480_REG_SLP_CNT, BIT(9));
+	if (ret)
+		dev_err(dev, "Could not power down device: %d\n", ret);
+
+	return ret;
+}
+
+static int adis16480_enable_irq(struct adis *adis, bool enable)
+{
+	uint16_t val;
+	int ret;
+
+	ret = __adis_read_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, &val);
+	if (ret)
+		return ret;
+
+	val &= ~ADIS16480_DRDY_EN_MSK;
+	val |= ADIS16480_DRDY_EN(enable);
+
+	return __adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, val);
+}
+
+static int adis16480_config_irq_pin(struct adis16480 *st)
+{
+	struct device *dev = &st->adis.spi->dev;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct irq_data *desc;
+	enum adis16480_int_pin pin;
+	unsigned int irq_type;
+	uint16_t val;
+	int i, irq = 0;
+
+	desc = irq_get_irq_data(st->adis.spi->irq);
+	if (!desc) {
+		dev_err(dev, "Could not find IRQ %d\n", irq);
+		return -EINVAL;
+	}
+
+	/* Disable data ready since the default after reset is on */
+	val = ADIS16480_DRDY_EN(0);
+
+	/*
+	 * Get the interrupt from the devicetre by reading the interrupt-names
+	 * property. If it is not specified, use DIO1 pin as default.
+	 * According to the datasheet, the factory default assigns DIO2 as data
+	 * ready signal. However, in the previous versions of the driver, DIO1
+	 * pin was used. So, we should leave it as is since some devices might
+	 * be expecting the interrupt on the wrong physical pin.
+	 */
+	pin = ADIS16480_PIN_DIO1;
+	for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) {
+		irq = fwnode_irq_get_byname(fwnode, adis16480_int_pin_names[i]);
+		if (irq > 0) {
+			pin = i;
+			break;
+		}
+	}
+
+	val |= ADIS16480_DRDY_SEL(pin);
+
+	/*
+	 * Get the interrupt line behaviour. The data ready polarity can be
+	 * configured as positive or negative, corresponding to
+	 * IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING respectively.
+	 */
+	irq_type = irqd_get_trigger_type(desc);
+	if (irq_type == IRQ_TYPE_EDGE_RISING) { /* Default */
+		val |= ADIS16480_DRDY_POL(1);
+	} else if (irq_type == IRQ_TYPE_EDGE_FALLING) {
+		val |= ADIS16480_DRDY_POL(0);
+	} else {
+		dev_err(dev, "Invalid interrupt type 0x%x specified\n", irq_type);
+		return -EINVAL;
+	}
+	/* Write the data ready configuration to the FNCTIO_CTRL register */
+	return adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val);
+}
+
+static int adis16480_fw_get_ext_clk_pin(struct adis16480 *st)
+{
+	struct device *dev = &st->adis.spi->dev;
+	const char *ext_clk_pin;
+	enum adis16480_int_pin pin;
+	int i;
+
+	pin = ADIS16480_PIN_DIO2;
+	if (device_property_read_string(dev, "adi,ext-clk-pin", &ext_clk_pin))
+		goto clk_input_not_found;
+
+	for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) {
+		if (strcasecmp(ext_clk_pin, adis16480_int_pin_names[i]) == 0)
+			return i;
+	}
+
+clk_input_not_found:
+	dev_info(dev, "clk input line not specified, using DIO2\n");
+	return pin;
+}
+
+static int adis16480_ext_clk_config(struct adis16480 *st, bool enable)
+{
+	struct device *dev = &st->adis.spi->dev;
+	unsigned int mode, mask;
+	enum adis16480_int_pin pin;
+	uint16_t val;
+	int ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, &val);
+	if (ret)
+		return ret;
+
+	pin = adis16480_fw_get_ext_clk_pin(st);
+	/*
+	 * Each DIOx pin supports only one function at a time. When a single pin
+	 * has two assignments, the enable bit for a lower priority function
+	 * automatically resets to zero (disabling the lower priority function).
+	 */
+	if (pin == ADIS16480_DRDY_SEL(val))
+		dev_warn(dev, "DIO%x pin supports only one function at a time\n", pin + 1);
+
+	mode = ADIS16480_SYNC_EN(enable) | ADIS16480_SYNC_SEL(pin);
+	mask = ADIS16480_SYNC_EN_MSK | ADIS16480_SYNC_SEL_MSK;
+	/* Only ADIS1649x devices support pps ext clock mode */
+	if (st->chip_info->has_pps_clk_mode) {
+		mode |= ADIS16480_SYNC_MODE(st->clk_mode);
+		mask |= ADIS16480_SYNC_MODE_MSK;
+	}
+
+	val &= ~mask;
+	val |= mode;
+
+	ret = adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val);
+	if (ret)
+		return ret;
+
+	return clk_prepare_enable(st->ext_clk);
+}
+
+static int adis16480_get_ext_clocks(struct adis16480 *st)
+{
+	struct device *dev = &st->adis.spi->dev;
+
+	st->ext_clk = devm_clk_get_optional(dev, "sync");
+	if (IS_ERR(st->ext_clk))
+		return dev_err_probe(dev, PTR_ERR(st->ext_clk), "failed to get ext clk\n");
+	if (st->ext_clk) {
+		st->clk_mode = ADIS16480_CLK_SYNC;
+		return 0;
+	}
+
+	if (st->chip_info->has_pps_clk_mode) {
+		st->ext_clk = devm_clk_get_optional(dev, "pps");
+		if (IS_ERR(st->ext_clk))
+			return dev_err_probe(dev, PTR_ERR(st->ext_clk), "failed to get ext clk\n");
+		if (st->ext_clk) {
+			st->clk_mode = ADIS16480_CLK_PPS;
+			return 0;
+		}
+	}
+
+	st->clk_mode = ADIS16480_CLK_INT;
+	return 0;
+}
+
+static void adis16480_stop(void *data)
+{
+	adis16480_stop_device(data);
+}
+
+static void adis16480_clk_disable(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int adis16480_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct adis_data *adis16480_data;
+	irq_handler_t trigger_handler = NULL;
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct adis16480 *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->chip_info = &adis16480_chip_info[id->driver_data];
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	indio_dev->info = &adis16480_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	adis16480_data = &st->chip_info->adis_data;
+
+	ret = adis_init(&st->adis, indio_dev, spi, adis16480_data);
+	if (ret)
+		return ret;
+
+	ret = __adis_initial_startup(&st->adis);
+	if (ret)
+		return ret;
+
+	if (st->chip_info->has_sleep_cnt) {
+		ret = devm_add_action_or_reset(dev, adis16480_stop, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	ret = adis16480_config_irq_pin(st);
+	if (ret)
+		return ret;
+
+	ret = adis16480_get_ext_clocks(st);
+	if (ret)
+		return ret;
+
+	if (st->ext_clk) {
+		ret = adis16480_ext_clk_config(st, true);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, adis16480_clk_disable, st->ext_clk);
+		if (ret)
+			return ret;
+
+		st->clk_freq = clk_get_rate(st->ext_clk);
+		st->clk_freq *= 1000; /* micro */
+		if (st->clk_mode == ADIS16480_CLK_PPS) {
+			u16 sync_scale;
+
+			/*
+			 * In PPS mode, the IMU sample rate is the clk_freq * sync_scale. Hence,
+			 * default the IMU sample rate to the highest multiple of the input clock
+			 * lower than the IMU max sample rate. The internal sample rate is the
+			 * max...
+			 */
+			sync_scale = st->chip_info->int_clk / st->clk_freq;
+			ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+			if (ret)
+				return ret;
+		}
+	} else {
+		st->clk_freq = st->chip_info->int_clk;
+	}
+
+	/* Only use our trigger handler if burst mode is supported */
+	if (adis16480_data->burst_len)
+		trigger_handler = adis16480_trigger_handler;
+
+	ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
+						 trigger_handler);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	adis16480_debugfs_init(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id adis16480_ids[] = {
+	{ "adis16375", ADIS16375 },
+	{ "adis16480", ADIS16480 },
+	{ "adis16485", ADIS16485 },
+	{ "adis16488", ADIS16488 },
+	{ "adis16490", ADIS16490 },
+	{ "adis16495-1", ADIS16495_1 },
+	{ "adis16495-2", ADIS16495_2 },
+	{ "adis16495-3", ADIS16495_3 },
+	{ "adis16497-1", ADIS16497_1 },
+	{ "adis16497-2", ADIS16497_2 },
+	{ "adis16497-3", ADIS16497_3 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adis16480_ids);
+
+static const struct of_device_id adis16480_of_match[] = {
+	{ .compatible = "adi,adis16375" },
+	{ .compatible = "adi,adis16480" },
+	{ .compatible = "adi,adis16485" },
+	{ .compatible = "adi,adis16488" },
+	{ .compatible = "adi,adis16490" },
+	{ .compatible = "adi,adis16495-1" },
+	{ .compatible = "adi,adis16495-2" },
+	{ .compatible = "adi,adis16495-3" },
+	{ .compatible = "adi,adis16497-1" },
+	{ .compatible = "adi,adis16497-2" },
+	{ .compatible = "adi,adis16497-3" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adis16480_of_match);
+
+static struct spi_driver adis16480_driver = {
+	.driver = {
+		.name = "adis16480",
+		.of_match_table = adis16480_of_match,
+	},
+	.id_table = adis16480_ids,
+	.probe = adis16480_probe,
+};
+module_spi_driver(adis16480_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16480 IMU driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
new file mode 100644
index 0000000000..928933027a
--- /dev/null
+++ b/drivers/iio/imu/adis_buffer.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/imu/adis.h>
+
+static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
+				       const unsigned long *scan_mask)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	unsigned int burst_length, burst_max_length;
+	u8 *tx;
+
+	burst_length = adis->data->burst_len + adis->burst_extra_len;
+
+	if (adis->data->burst_max_len)
+		burst_max_length = adis->data->burst_max_len;
+	else
+		burst_max_length = burst_length;
+
+	adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
+	if (!adis->xfer)
+		return -ENOMEM;
+
+	adis->buffer = kzalloc(burst_max_length + sizeof(u16), GFP_KERNEL);
+	if (!adis->buffer) {
+		kfree(adis->xfer);
+		adis->xfer = NULL;
+		return -ENOMEM;
+	}
+
+	tx = adis->buffer + burst_max_length;
+	tx[0] = ADIS_READ_REG(adis->data->burst_reg_cmd);
+	tx[1] = 0;
+
+	adis->xfer[0].tx_buf = tx;
+	adis->xfer[0].bits_per_word = 8;
+	adis->xfer[0].len = 2;
+	if (adis->data->burst_max_speed_hz)
+		adis->xfer[0].speed_hz = adis->data->burst_max_speed_hz;
+	adis->xfer[1].rx_buf = adis->buffer;
+	adis->xfer[1].bits_per_word = 8;
+	adis->xfer[1].len = burst_length;
+	if (adis->data->burst_max_speed_hz)
+		adis->xfer[1].speed_hz = adis->data->burst_max_speed_hz;
+
+	spi_message_init(&adis->msg);
+	spi_message_add_tail(&adis->xfer[0], &adis->msg);
+	spi_message_add_tail(&adis->xfer[1], &adis->msg);
+
+	return 0;
+}
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+			  const unsigned long *scan_mask)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	const struct iio_chan_spec *chan;
+	unsigned int scan_count;
+	unsigned int i, j;
+	__be16 *tx, *rx;
+
+	kfree(adis->xfer);
+	kfree(adis->buffer);
+
+	if (adis->data->burst_len)
+		return adis_update_scan_mode_burst(indio_dev, scan_mask);
+
+	scan_count = indio_dev->scan_bytes / 2;
+
+	adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
+	if (!adis->xfer)
+		return -ENOMEM;
+
+	adis->buffer = kcalloc(indio_dev->scan_bytes, 2, GFP_KERNEL);
+	if (!adis->buffer) {
+		kfree(adis->xfer);
+		adis->xfer = NULL;
+		return -ENOMEM;
+	}
+
+	rx = adis->buffer;
+	tx = rx + scan_count;
+
+	spi_message_init(&adis->msg);
+
+	for (j = 0; j <= scan_count; j++) {
+		adis->xfer[j].bits_per_word = 8;
+		if (j != scan_count)
+			adis->xfer[j].cs_change = 1;
+		adis->xfer[j].len = 2;
+		adis->xfer[j].delay.value = adis->data->read_delay;
+		adis->xfer[j].delay.unit = SPI_DELAY_UNIT_USECS;
+		if (j < scan_count)
+			adis->xfer[j].tx_buf = &tx[j];
+		if (j >= 1)
+			adis->xfer[j].rx_buf = &rx[j - 1];
+		spi_message_add_tail(&adis->xfer[j], &adis->msg);
+	}
+
+	chan = indio_dev->channels;
+	for (i = 0; i < indio_dev->num_channels; i++, chan++) {
+		if (!test_bit(chan->scan_index, scan_mask))
+			continue;
+		if (chan->scan_type.storagebits == 32)
+			*tx++ = cpu_to_be16((chan->address + 2) << 8);
+		*tx++ = cpu_to_be16(chan->address << 8);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(adis_update_scan_mode, IIO_ADISLIB);
+
+static irqreturn_t adis_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (adis->data->has_paging) {
+		mutex_lock(&adis->state_lock);
+		if (adis->current_page != 0) {
+			adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
+			adis->tx[1] = 0;
+			ret = spi_write(adis->spi, adis->tx, 2);
+			if (ret) {
+				dev_err(&adis->spi->dev, "Failed to change device page: %d\n", ret);
+				mutex_unlock(&adis->state_lock);
+				goto irq_done;
+			}
+
+			adis->current_page = 0;
+		}
+	}
+
+	ret = spi_sync(adis->spi, &adis->msg);
+	if (adis->data->has_paging)
+		mutex_unlock(&adis->state_lock);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
+		goto irq_done;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
+					   pf->timestamp);
+
+irq_done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static void adis_buffer_cleanup(void *arg)
+{
+	struct adis *adis = arg;
+
+	kfree(adis->buffer);
+	kfree(adis->xfer);
+}
+
+/**
+ * devm_adis_setup_buffer_and_trigger() - Sets up buffer and trigger for
+ *					  the managed adis device
+ * @adis: The adis device
+ * @indio_dev: The IIO device
+ * @trigger_handler: Optional trigger handler, may be NULL.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function sets up the buffer and trigger for a adis devices.  If
+ * 'trigger_handler' is NULL the default trigger handler will be used. The
+ * default trigger handler will simply read the registers assigned to the
+ * currently active channels.
+ */
+int
+devm_adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
+				   irq_handler_t trigger_handler)
+{
+	int ret;
+
+	if (!trigger_handler)
+		trigger_handler = adis_trigger_handler;
+
+	ret = devm_iio_triggered_buffer_setup(&adis->spi->dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (adis->spi->irq) {
+		ret = devm_adis_probe_trigger(adis, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	return devm_add_action_or_reset(&adis->spi->dev, adis_buffer_cleanup,
+					adis);
+}
+EXPORT_SYMBOL_NS_GPL(devm_adis_setup_buffer_and_trigger, IIO_ADISLIB);
+
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
new file mode 100644
index 0000000000..f890bf842d
--- /dev/null
+++ b/drivers/iio/imu/adis_trigger.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/export.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/imu/adis.h>
+
+static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state)
+{
+	struct adis *adis = iio_trigger_get_drvdata(trig);
+
+	return adis_enable_irq(adis, state);
+}
+
+static const struct iio_trigger_ops adis_trigger_ops = {
+	.set_trigger_state = &adis_data_rdy_trigger_set_state,
+};
+
+static int adis_validate_irq_flag(struct adis *adis)
+{
+	unsigned long direction = adis->irq_flag & IRQF_TRIGGER_MASK;
+
+	/* We cannot mask the interrupt so ensure it's not enabled at request */
+	if (adis->data->unmasked_drdy)
+		adis->irq_flag |= IRQF_NO_AUTOEN;
+	/*
+	 * Typically this devices have data ready either on the rising edge or
+	 * on the falling edge of the data ready pin. This checks enforces that
+	 * one of those is set in the drivers... It defaults to
+	 * IRQF_TRIGGER_RISING for backward compatibility with devices that
+	 * don't support changing the pin polarity.
+	 */
+	if (direction == IRQF_TRIGGER_NONE) {
+		adis->irq_flag |= IRQF_TRIGGER_RISING;
+		return 0;
+	} else if (direction != IRQF_TRIGGER_RISING &&
+		   direction != IRQF_TRIGGER_FALLING) {
+		dev_err(&adis->spi->dev, "Invalid IRQ mask: %08lx\n",
+			adis->irq_flag);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * devm_adis_probe_trigger() - Sets up trigger for a managed adis device
+ * @adis: The adis device
+ * @indio_dev: The IIO device
+ *
+ * Returns 0 on success or a negative error code
+ */
+int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
+{
+	int ret;
+
+	adis->trig = devm_iio_trigger_alloc(&adis->spi->dev, "%s-dev%d",
+					    indio_dev->name,
+					    iio_device_id(indio_dev));
+	if (!adis->trig)
+		return -ENOMEM;
+
+	adis->trig->ops = &adis_trigger_ops;
+	iio_trigger_set_drvdata(adis->trig, adis);
+
+	ret = adis_validate_irq_flag(adis);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(&adis->spi->dev, adis->spi->irq,
+			       &iio_trigger_generic_data_rdy_poll,
+			       adis->irq_flag,
+			       indio_dev->name,
+			       adis->trig);
+	if (ret)
+		return ret;
+
+	return devm_iio_trigger_register(&adis->spi->dev, adis->trig);
+}
+EXPORT_SYMBOL_NS_GPL(devm_adis_probe_trigger, IIO_ADISLIB);
+
diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig
new file mode 100644
index 0000000000..9d14d85cca
--- /dev/null
+++ b/drivers/iio/imu/bmi160/Kconfig
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# BMI160 IMU driver
+#
+
+config BMI160
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config BMI160_I2C
+	tristate "Bosch BMI160 I2C driver"
+	depends on I2C
+	select BMI160
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for BMI160 IMU on I2C with
+	  accelerometer, gyroscope and external BMG160 magnetometer.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bmi160_i2c.
+
+config BMI160_SPI
+	tristate "Bosch BMI160 SPI driver"
+	depends on SPI
+	select BMI160
+	select REGMAP_SPI
+	help
+	  If you say yes here you get support for BMI160 IMU on SPI with
+	  accelerometer, gyroscope and external BMG160 magnetometer.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bmi160_spi.
diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile
new file mode 100644
index 0000000000..fdcfeddf48
--- /dev/null
+++ b/drivers/iio/imu/bmi160/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for Bosch BMI160 IMU
+#
+obj-$(CONFIG_BMI160) += bmi160_core.o
+obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o
+obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o
diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h
new file mode 100644
index 0000000000..32c2ea2d71
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BMI160_H_
+#define BMI160_H_
+
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+struct bmi160_data {
+	struct regmap *regmap;
+	struct iio_trigger *trig;
+	struct regulator_bulk_data supplies[2];
+	struct iio_mount_matrix orientation;
+	/*
+	 * Ensure natural alignment for timestamp if present.
+	 * Max length needed: 2 * 3 channels + 4 bytes padding + 8 byte ts.
+	 * If fewer channels are enabled, less space may be needed, as
+	 * long as the timestamp is still aligned to 8 bytes.
+	 */
+	__le16 buf[12] __aligned(8);
+};
+
+extern const struct regmap_config bmi160_regmap_config;
+
+int bmi160_core_probe(struct device *dev, struct regmap *regmap,
+		      const char *name, bool use_spi);
+
+int bmi160_enable_irq(struct regmap *regmap, bool enable);
+
+int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type);
+
+#endif  /* BMI160_H_ */
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
new file mode 100644
index 0000000000..a77f1a8348
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BMI160 - Bosch IMU (accel, gyro plus external magnetometer)
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ * Copyright (c) 2019, Martin Kelly.
+ *
+ * IIO core driver for BMI160, with support for I2C/SPI busses
+ *
+ * TODO: magnetometer, hardware FIFO
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+
+#include "bmi160.h"
+
+#define BMI160_REG_CHIP_ID	0x00
+#define BMI160_CHIP_ID_VAL	0xD1
+
+#define BMI160_REG_PMU_STATUS	0x03
+
+/* X axis data low byte address, the rest can be obtained using axis offset */
+#define BMI160_REG_DATA_MAGN_XOUT_L	0x04
+#define BMI160_REG_DATA_GYRO_XOUT_L	0x0C
+#define BMI160_REG_DATA_ACCEL_XOUT_L	0x12
+
+#define BMI160_REG_ACCEL_CONFIG		0x40
+#define BMI160_ACCEL_CONFIG_ODR_MASK	GENMASK(3, 0)
+#define BMI160_ACCEL_CONFIG_BWP_MASK	GENMASK(6, 4)
+
+#define BMI160_REG_ACCEL_RANGE		0x41
+#define BMI160_ACCEL_RANGE_2G		0x03
+#define BMI160_ACCEL_RANGE_4G		0x05
+#define BMI160_ACCEL_RANGE_8G		0x08
+#define BMI160_ACCEL_RANGE_16G		0x0C
+
+#define BMI160_REG_GYRO_CONFIG		0x42
+#define BMI160_GYRO_CONFIG_ODR_MASK	GENMASK(3, 0)
+#define BMI160_GYRO_CONFIG_BWP_MASK	GENMASK(5, 4)
+
+#define BMI160_REG_GYRO_RANGE		0x43
+#define BMI160_GYRO_RANGE_2000DPS	0x00
+#define BMI160_GYRO_RANGE_1000DPS	0x01
+#define BMI160_GYRO_RANGE_500DPS	0x02
+#define BMI160_GYRO_RANGE_250DPS	0x03
+#define BMI160_GYRO_RANGE_125DPS	0x04
+
+#define BMI160_REG_CMD			0x7E
+#define BMI160_CMD_ACCEL_PM_SUSPEND	0x10
+#define BMI160_CMD_ACCEL_PM_NORMAL	0x11
+#define BMI160_CMD_ACCEL_PM_LOW_POWER	0x12
+#define BMI160_CMD_GYRO_PM_SUSPEND	0x14
+#define BMI160_CMD_GYRO_PM_NORMAL	0x15
+#define BMI160_CMD_GYRO_PM_FAST_STARTUP	0x17
+#define BMI160_CMD_SOFTRESET		0xB6
+
+#define BMI160_REG_INT_EN		0x51
+#define BMI160_DRDY_INT_EN		BIT(4)
+
+#define BMI160_REG_INT_OUT_CTRL		0x53
+#define BMI160_INT_OUT_CTRL_MASK	0x0f
+#define BMI160_INT1_OUT_CTRL_SHIFT	0
+#define BMI160_INT2_OUT_CTRL_SHIFT	4
+#define BMI160_EDGE_TRIGGERED		BIT(0)
+#define BMI160_ACTIVE_HIGH		BIT(1)
+#define BMI160_OPEN_DRAIN		BIT(2)
+#define BMI160_OUTPUT_EN		BIT(3)
+
+#define BMI160_REG_INT_LATCH		0x54
+#define BMI160_INT1_LATCH_MASK		BIT(4)
+#define BMI160_INT2_LATCH_MASK		BIT(5)
+
+/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */
+#define BMI160_REG_INT_MAP		0x56
+#define BMI160_INT1_MAP_DRDY_EN		0x80
+#define BMI160_INT2_MAP_DRDY_EN		0x08
+
+#define BMI160_REG_DUMMY		0x7F
+
+#define BMI160_NORMAL_WRITE_USLEEP	2
+#define BMI160_SUSPENDED_WRITE_USLEEP	450
+
+#define BMI160_ACCEL_PMU_MIN_USLEEP	3800
+#define BMI160_GYRO_PMU_MIN_USLEEP	80000
+#define BMI160_SOFTRESET_USLEEP		1000
+
+#define BMI160_CHANNEL(_type, _axis, _index) {			\
+	.type = _type,						\
+	.modified = 1,						\
+	.channel2 = IIO_MOD_##_axis,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_LE,				\
+	},							\
+	.ext_info = bmi160_ext_info,				\
+}
+
+/* scan indexes follow DATA register order */
+enum bmi160_scan_axis {
+	BMI160_SCAN_EXT_MAGN_X = 0,
+	BMI160_SCAN_EXT_MAGN_Y,
+	BMI160_SCAN_EXT_MAGN_Z,
+	BMI160_SCAN_RHALL,
+	BMI160_SCAN_GYRO_X,
+	BMI160_SCAN_GYRO_Y,
+	BMI160_SCAN_GYRO_Z,
+	BMI160_SCAN_ACCEL_X,
+	BMI160_SCAN_ACCEL_Y,
+	BMI160_SCAN_ACCEL_Z,
+	BMI160_SCAN_TIMESTAMP,
+};
+
+enum bmi160_sensor_type {
+	BMI160_ACCEL	= 0,
+	BMI160_GYRO,
+	BMI160_EXT_MAGN,
+	BMI160_NUM_SENSORS /* must be last */
+};
+
+enum bmi160_int_pin {
+	BMI160_PIN_INT1,
+	BMI160_PIN_INT2
+};
+
+const struct regmap_config bmi160_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+EXPORT_SYMBOL_NS(bmi160_regmap_config, IIO_BMI160);
+
+struct bmi160_regs {
+	u8 data; /* LSB byte register for X-axis */
+	u8 config;
+	u8 config_odr_mask;
+	u8 config_bwp_mask;
+	u8 range;
+	u8 pmu_cmd_normal;
+	u8 pmu_cmd_suspend;
+};
+
+static struct bmi160_regs bmi160_regs[] = {
+	[BMI160_ACCEL] = {
+		.data	= BMI160_REG_DATA_ACCEL_XOUT_L,
+		.config	= BMI160_REG_ACCEL_CONFIG,
+		.config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK,
+		.config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK,
+		.range	= BMI160_REG_ACCEL_RANGE,
+		.pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL,
+		.pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND,
+	},
+	[BMI160_GYRO] = {
+		.data	= BMI160_REG_DATA_GYRO_XOUT_L,
+		.config	= BMI160_REG_GYRO_CONFIG,
+		.config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK,
+		.config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK,
+		.range	= BMI160_REG_GYRO_RANGE,
+		.pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL,
+		.pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND,
+	},
+};
+
+static unsigned long bmi160_pmu_time[] = {
+	[BMI160_ACCEL] = BMI160_ACCEL_PMU_MIN_USLEEP,
+	[BMI160_GYRO] = BMI160_GYRO_PMU_MIN_USLEEP,
+};
+
+struct bmi160_scale {
+	u8 bits;
+	int uscale;
+};
+
+struct bmi160_odr {
+	u8 bits;
+	int odr;
+	int uodr;
+};
+
+static const struct bmi160_scale bmi160_accel_scale[] = {
+	{ BMI160_ACCEL_RANGE_2G, 598},
+	{ BMI160_ACCEL_RANGE_4G, 1197},
+	{ BMI160_ACCEL_RANGE_8G, 2394},
+	{ BMI160_ACCEL_RANGE_16G, 4788},
+};
+
+static const struct bmi160_scale bmi160_gyro_scale[] = {
+	{ BMI160_GYRO_RANGE_2000DPS, 1065},
+	{ BMI160_GYRO_RANGE_1000DPS, 532},
+	{ BMI160_GYRO_RANGE_500DPS, 266},
+	{ BMI160_GYRO_RANGE_250DPS, 133},
+	{ BMI160_GYRO_RANGE_125DPS, 66},
+};
+
+struct bmi160_scale_item {
+	const struct bmi160_scale *tbl;
+	int num;
+};
+
+static const struct  bmi160_scale_item bmi160_scale_table[] = {
+	[BMI160_ACCEL] = {
+		.tbl	= bmi160_accel_scale,
+		.num	= ARRAY_SIZE(bmi160_accel_scale),
+	},
+	[BMI160_GYRO] = {
+		.tbl	= bmi160_gyro_scale,
+		.num	= ARRAY_SIZE(bmi160_gyro_scale),
+	},
+};
+
+static const struct bmi160_odr bmi160_accel_odr[] = {
+	{0x01, 0, 781250},
+	{0x02, 1, 562500},
+	{0x03, 3, 125000},
+	{0x04, 6, 250000},
+	{0x05, 12, 500000},
+	{0x06, 25, 0},
+	{0x07, 50, 0},
+	{0x08, 100, 0},
+	{0x09, 200, 0},
+	{0x0A, 400, 0},
+	{0x0B, 800, 0},
+	{0x0C, 1600, 0},
+};
+
+static const struct bmi160_odr bmi160_gyro_odr[] = {
+	{0x06, 25, 0},
+	{0x07, 50, 0},
+	{0x08, 100, 0},
+	{0x09, 200, 0},
+	{0x0A, 400, 0},
+	{0x0B, 800, 0},
+	{0x0C, 1600, 0},
+	{0x0D, 3200, 0},
+};
+
+struct bmi160_odr_item {
+	const struct bmi160_odr *tbl;
+	int num;
+};
+
+static const struct  bmi160_odr_item bmi160_odr_table[] = {
+	[BMI160_ACCEL] = {
+		.tbl	= bmi160_accel_odr,
+		.num	= ARRAY_SIZE(bmi160_accel_odr),
+	},
+	[BMI160_GYRO] = {
+		.tbl	= bmi160_gyro_odr,
+		.num	= ARRAY_SIZE(bmi160_gyro_odr),
+	},
+};
+
+static const struct iio_mount_matrix *
+bmi160_get_mount_matrix(const struct iio_dev *indio_dev,
+			const struct iio_chan_spec *chan)
+{
+	struct bmi160_data *data = iio_priv(indio_dev);
+
+	return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bmi160_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmi160_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec bmi160_channels[] = {
+	BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X),
+	BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y),
+	BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z),
+	BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X),
+	BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y),
+	BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z),
+	IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP),
+};
+
+static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type)
+{
+	switch (iio_type) {
+	case IIO_ACCEL:
+		return BMI160_ACCEL;
+	case IIO_ANGL_VEL:
+		return BMI160_GYRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static
+int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t,
+		    bool mode)
+{
+	int ret;
+	u8 cmd;
+
+	if (mode)
+		cmd = bmi160_regs[t].pmu_cmd_normal;
+	else
+		cmd = bmi160_regs[t].pmu_cmd_suspend;
+
+	ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd);
+	if (ret)
+		return ret;
+
+	usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000);
+
+	return 0;
+}
+
+static
+int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t,
+		     int uscale)
+{
+	int i;
+
+	for (i = 0; i < bmi160_scale_table[t].num; i++)
+		if (bmi160_scale_table[t].tbl[i].uscale == uscale)
+			break;
+
+	if (i == bmi160_scale_table[t].num)
+		return -EINVAL;
+
+	return regmap_write(data->regmap, bmi160_regs[t].range,
+			    bmi160_scale_table[t].tbl[i].bits);
+}
+
+static
+int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t,
+		     int *uscale)
+{
+	int i, ret, val;
+
+	ret = regmap_read(data->regmap, bmi160_regs[t].range, &val);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < bmi160_scale_table[t].num; i++)
+		if (bmi160_scale_table[t].tbl[i].bits == val) {
+			*uscale = bmi160_scale_table[t].tbl[i].uscale;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static int bmi160_get_data(struct bmi160_data *data, int chan_type,
+			   int axis, int *val)
+{
+	u8 reg;
+	int ret;
+	__le16 sample;
+	enum bmi160_sensor_type t = bmi160_to_sensor(chan_type);
+
+	reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(sample);
+
+	ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample));
+	if (ret)
+		return ret;
+
+	*val = sign_extend32(le16_to_cpu(sample), 15);
+
+	return 0;
+}
+
+static
+int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
+		   int odr, int uodr)
+{
+	int i;
+
+	for (i = 0; i < bmi160_odr_table[t].num; i++)
+		if (bmi160_odr_table[t].tbl[i].odr == odr &&
+		    bmi160_odr_table[t].tbl[i].uodr == uodr)
+			break;
+
+	if (i >= bmi160_odr_table[t].num)
+		return -EINVAL;
+
+	return regmap_update_bits(data->regmap,
+				  bmi160_regs[t].config,
+				  bmi160_regs[t].config_odr_mask,
+				  bmi160_odr_table[t].tbl[i].bits);
+}
+
+static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
+			  int *odr, int *uodr)
+{
+	int i, val, ret;
+
+	ret = regmap_read(data->regmap, bmi160_regs[t].config, &val);
+	if (ret)
+		return ret;
+
+	val &= bmi160_regs[t].config_odr_mask;
+
+	for (i = 0; i < bmi160_odr_table[t].num; i++)
+		if (val == bmi160_odr_table[t].tbl[i].bits)
+			break;
+
+	if (i >= bmi160_odr_table[t].num)
+		return -EINVAL;
+
+	*odr = bmi160_odr_table[t].tbl[i].odr;
+	*uodr = bmi160_odr_table[t].tbl[i].uodr;
+
+	return 0;
+}
+
+static irqreturn_t bmi160_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct bmi160_data *data = iio_priv(indio_dev);
+	int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
+	__le16 sample;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = regmap_bulk_read(data->regmap, base + i * sizeof(sample),
+				       &sample, sizeof(sample));
+		if (ret)
+			goto done;
+		data->buf[j++] = sample;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buf, pf->timestamp);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int bmi160_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	int ret;
+	struct bmi160_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = bmi160_get_data(data, chan->type, chan->channel2, val);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		ret = bmi160_get_scale(data,
+				       bmi160_to_sensor(chan->type), val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type),
+				     val, val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bmi160_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bmi160_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return bmi160_set_scale(data,
+					bmi160_to_sensor(chan->type), val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return bmi160_set_odr(data, bmi160_to_sensor(chan->type),
+				      val, val2);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static
+IIO_CONST_ATTR(in_accel_sampling_frequency_available,
+	       "0.78125 1.5625 3.125 6.25 12.5 25 50 100 200 400 800 1600");
+static
+IIO_CONST_ATTR(in_anglvel_sampling_frequency_available,
+	       "25 50 100 200 400 800 1600 3200");
+static
+IIO_CONST_ATTR(in_accel_scale_available,
+	       "0.000598 0.001197 0.002394 0.004788");
+static
+IIO_CONST_ATTR(in_anglvel_scale_available,
+	       "0.001065 0.000532 0.000266 0.000133 0.000066");
+
+static struct attribute *bmi160_attrs[] = {
+	&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bmi160_attrs_group = {
+	.attrs = bmi160_attrs,
+};
+
+static const struct iio_info bmi160_info = {
+	.read_raw = bmi160_read_raw,
+	.write_raw = bmi160_write_raw,
+	.attrs = &bmi160_attrs_group,
+};
+
+static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg,
+				 unsigned int mask, unsigned int bits,
+				 unsigned int write_usleep)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	val = (val & ~mask) | bits;
+
+	ret = regmap_write(regmap, reg, val);
+	if (ret)
+		return ret;
+
+	/*
+	 * We need to wait after writing before we can write again. See the
+	 * datasheet, page 93.
+	 */
+	usleep_range(write_usleep, write_usleep + 1000);
+
+	return 0;
+}
+
+static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin,
+			     bool open_drain, u8 irq_mask,
+			     unsigned long write_usleep)
+{
+	int ret;
+	struct device *dev = regmap_get_device(regmap);
+	u8 int_out_ctrl_shift;
+	u8 int_latch_mask;
+	u8 int_map_mask;
+	u8 int_out_ctrl_mask;
+	u8 int_out_ctrl_bits;
+	const char *pin_name;
+
+	switch (pin) {
+	case BMI160_PIN_INT1:
+		int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT;
+		int_latch_mask = BMI160_INT1_LATCH_MASK;
+		int_map_mask = BMI160_INT1_MAP_DRDY_EN;
+		break;
+	case BMI160_PIN_INT2:
+		int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT;
+		int_latch_mask = BMI160_INT2_LATCH_MASK;
+		int_map_mask = BMI160_INT2_MAP_DRDY_EN;
+		break;
+	}
+	int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift;
+
+	/*
+	 * Enable the requested pin with the right settings:
+	 * - Push-pull/open-drain
+	 * - Active low/high
+	 * - Edge/level triggered
+	 */
+	int_out_ctrl_bits = BMI160_OUTPUT_EN;
+	if (open_drain)
+		/* Default is push-pull. */
+		int_out_ctrl_bits |= BMI160_OPEN_DRAIN;
+	int_out_ctrl_bits |= irq_mask;
+	int_out_ctrl_bits <<= int_out_ctrl_shift;
+
+	ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL,
+				    int_out_ctrl_mask, int_out_ctrl_bits,
+				    write_usleep);
+	if (ret)
+		return ret;
+
+	/* Set the pin to input mode with no latching. */
+	ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH,
+				    int_latch_mask, int_latch_mask,
+				    write_usleep);
+	if (ret)
+		return ret;
+
+	/* Map interrupts to the requested pin. */
+	ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP,
+				    int_map_mask, int_map_mask,
+				    write_usleep);
+	if (ret) {
+		switch (pin) {
+		case BMI160_PIN_INT1:
+			pin_name = "INT1";
+			break;
+		case BMI160_PIN_INT2:
+			pin_name = "INT2";
+			break;
+		}
+		dev_err(dev, "Failed to configure %s IRQ pin", pin_name);
+	}
+
+	return ret;
+}
+
+int bmi160_enable_irq(struct regmap *regmap, bool enable)
+{
+	unsigned int enable_bit = 0;
+
+	if (enable)
+		enable_bit = BMI160_DRDY_INT_EN;
+
+	return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN,
+				     BMI160_DRDY_INT_EN, enable_bit,
+				     BMI160_NORMAL_WRITE_USLEEP);
+}
+EXPORT_SYMBOL_NS(bmi160_enable_irq, IIO_BMI160);
+
+static int bmi160_get_irq(struct fwnode_handle *fwnode, enum bmi160_int_pin *pin)
+{
+	int irq;
+
+	/* Use INT1 if possible, otherwise fall back to INT2. */
+	irq = fwnode_irq_get_byname(fwnode, "INT1");
+	if (irq > 0) {
+		*pin = BMI160_PIN_INT1;
+		return irq;
+	}
+
+	irq = fwnode_irq_get_byname(fwnode, "INT2");
+	if (irq > 0)
+		*pin = BMI160_PIN_INT2;
+
+	return irq;
+}
+
+static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type,
+				    enum bmi160_int_pin pin)
+{
+	bool open_drain;
+	u8 irq_mask;
+	struct bmi160_data *data = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(data->regmap);
+
+	/* Level-triggered, active-low is the default if we set all zeroes. */
+	if (irq_type == IRQF_TRIGGER_RISING)
+		irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED;
+	else if (irq_type == IRQF_TRIGGER_FALLING)
+		irq_mask = BMI160_EDGE_TRIGGERED;
+	else if (irq_type == IRQF_TRIGGER_HIGH)
+		irq_mask = BMI160_ACTIVE_HIGH;
+	else if (irq_type == IRQF_TRIGGER_LOW)
+		irq_mask = 0;
+	else {
+		dev_err(&indio_dev->dev,
+			"Invalid interrupt type 0x%x specified\n", irq_type);
+		return -EINVAL;
+	}
+
+	open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+	return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask,
+				 BMI160_NORMAL_WRITE_USLEEP);
+}
+
+static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq,
+			    enum bmi160_int_pin pin)
+{
+	struct irq_data *desc;
+	u32 irq_type;
+	int ret;
+
+	desc = irq_get_irq_data(irq);
+	if (!desc) {
+		dev_err(&indio_dev->dev, "Could not find IRQ %d\n", irq);
+		return -EINVAL;
+	}
+
+	irq_type = irqd_get_trigger_type(desc);
+
+	ret = bmi160_config_device_irq(indio_dev, irq_type, pin);
+	if (ret)
+		return ret;
+
+	return bmi160_probe_trigger(indio_dev, irq, irq_type);
+}
+
+static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
+{
+	int ret;
+	unsigned int val;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
+	if (ret)
+		goto disable_regulator;
+
+	usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
+
+	/*
+	 * CS rising edge is needed before starting SPI, so do a dummy read
+	 * See Section 3.2.1, page 86 of the datasheet
+	 */
+	if (use_spi) {
+		ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
+		if (ret)
+			goto disable_regulator;
+	}
+
+	ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
+	if (ret) {
+		dev_err(dev, "Error reading chip id\n");
+		goto disable_regulator;
+	}
+	if (val != BMI160_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip id, got %x expected %x\n",
+			val, BMI160_CHIP_ID_VAL);
+		ret = -ENODEV;
+		goto disable_regulator;
+	}
+
+	ret = bmi160_set_mode(data, BMI160_ACCEL, true);
+	if (ret)
+		goto disable_regulator;
+
+	ret = bmi160_set_mode(data, BMI160_GYRO, true);
+	if (ret)
+		goto disable_accel;
+
+	return 0;
+
+disable_accel:
+	bmi160_set_mode(data, BMI160_ACCEL, false);
+
+disable_regulator:
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+	return ret;
+}
+
+static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					     bool enable)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct bmi160_data *data = iio_priv(indio_dev);
+
+	return bmi160_enable_irq(data->regmap, enable);
+}
+
+static const struct iio_trigger_ops bmi160_trigger_ops = {
+	.set_trigger_state = &bmi160_data_rdy_trigger_set_state,
+};
+
+int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type)
+{
+	struct bmi160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d",
+					    indio_dev->name,
+					    iio_device_id(indio_dev));
+
+	if (data->trig == NULL)
+		return -ENOMEM;
+
+	ret = devm_request_irq(&indio_dev->dev, irq,
+			       &iio_trigger_generic_data_rdy_poll,
+			       irq_type, "bmi160", data->trig);
+	if (ret)
+		return ret;
+
+	data->trig->dev.parent = regmap_get_device(data->regmap);
+	data->trig->ops = &bmi160_trigger_ops;
+	iio_trigger_set_drvdata(data->trig, indio_dev);
+
+	ret = devm_iio_trigger_register(&indio_dev->dev, data->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(data->trig);
+
+	return 0;
+}
+
+static void bmi160_chip_uninit(void *data)
+{
+	struct bmi160_data *bmi_data = data;
+	struct device *dev = regmap_get_device(bmi_data->regmap);
+	int ret;
+
+	bmi160_set_mode(bmi_data, BMI160_GYRO, false);
+	bmi160_set_mode(bmi_data, BMI160_ACCEL, false);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(bmi_data->supplies),
+				     bmi_data->supplies);
+	if (ret)
+		dev_err(dev, "Failed to disable regulators: %d\n", ret);
+}
+
+int bmi160_core_probe(struct device *dev, struct regmap *regmap,
+		      const char *name, bool use_spi)
+{
+	struct iio_dev *indio_dev;
+	struct bmi160_data *data;
+	int irq;
+	enum bmi160_int_pin int_pin;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->regmap = regmap;
+
+	data->supplies[0].supply = "vdd";
+	data->supplies[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev,
+				      ARRAY_SIZE(data->supplies),
+				      data->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ret = iio_read_mount_matrix(dev, &data->orientation);
+	if (ret)
+		return ret;
+
+	ret = bmi160_chip_init(data, use_spi);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data);
+	if (ret)
+		return ret;
+
+	indio_dev->channels = bmi160_channels;
+	indio_dev->num_channels = ARRAY_SIZE(bmi160_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &bmi160_info;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      bmi160_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	irq = bmi160_get_irq(dev_fwnode(dev), &int_pin);
+	if (irq > 0) {
+		ret = bmi160_setup_irq(indio_dev, irq, int_pin);
+		if (ret)
+			dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n",
+				irq);
+	} else {
+		dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n");
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(bmi160_core_probe, IIO_BMI160);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("Bosch BMI160 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
new file mode 100644
index 0000000000..81652c08e6
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BMI160 - Bosch IMU, I2C bits
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * 7-bit I2C slave address is:
+ *      - 0x68 if SDO is pulled to GND
+ *      - 0x69 if SDO is pulled to VDDIO
+ */
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bmi160.h"
+
+static int bmi160_i2c_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct regmap *regmap;
+	const char *name;
+
+	regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+	else
+		name = dev_name(&client->dev);
+
+	return bmi160_core_probe(&client->dev, regmap, name, false);
+}
+
+static const struct i2c_device_id bmi160_i2c_id[] = {
+	{"bmi160", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id);
+
+static const struct acpi_device_id bmi160_acpi_match[] = {
+	{"BMI0160", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
+
+static const struct of_device_id bmi160_of_match[] = {
+	{ .compatible = "bosch,bmi160" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bmi160_of_match);
+
+static struct i2c_driver bmi160_i2c_driver = {
+	.driver = {
+		.name			= "bmi160_i2c",
+		.acpi_match_table	= bmi160_acpi_match,
+		.of_match_table		= bmi160_of_match,
+	},
+	.probe		= bmi160_i2c_probe,
+	.id_table	= bmi160_i2c_id,
+};
+module_i2c_driver(bmi160_i2c_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("BMI160 I2C driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_BMI160);
diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
new file mode 100644
index 0000000000..8b573ea99a
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_spi.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BMI160 - Bosch IMU, SPI bits
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ */
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "bmi160.h"
+
+static int bmi160_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	const char *name;
+
+	regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+	else
+		name = dev_name(&spi->dev);
+
+	return bmi160_core_probe(&spi->dev, regmap, name, true);
+}
+
+static const struct spi_device_id bmi160_spi_id[] = {
+	{"bmi160", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, bmi160_spi_id);
+
+static const struct acpi_device_id bmi160_acpi_match[] = {
+	{"BMI0160", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
+
+static const struct of_device_id bmi160_of_match[] = {
+	{ .compatible = "bosch,bmi160" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bmi160_of_match);
+
+static struct spi_driver bmi160_spi_driver = {
+	.probe		= bmi160_spi_probe,
+	.id_table	= bmi160_spi_id,
+	.driver = {
+		.acpi_match_table	= bmi160_acpi_match,
+		.of_match_table		= bmi160_of_match,
+		.name			= "bmi160_spi",
+	},
+};
+module_spi_driver(bmi160_spi_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Bosch BMI160 SPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_BMI160);
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
new file mode 100644
index 0000000000..83e53acfbe
--- /dev/null
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config BOSCH_BNO055
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config BOSCH_BNO055_SERIAL
+	tristate "Bosch BNO055 attached via UART"
+	depends on SERIAL_DEV_BUS
+	select BOSCH_BNO055
+	help
+	  Enable this to support Bosch BNO055 IMUs attached via UART.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bno055_sl.
+
+config BOSCH_BNO055_I2C
+	tristate "Bosch BNO055 attached via I2C bus"
+	depends on I2C
+	select REGMAP_I2C
+	select BOSCH_BNO055
+	help
+	  Enable this to support Bosch BNO055 IMUs attached via I2C bus.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bno055_i2c.
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
new file mode 100644
index 0000000000..98c624730d
--- /dev/null
+++ b/drivers/iio/imu/bno055/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_BOSCH_BNO055) += bno055.o
+obj-$(CONFIG_BOSCH_BNO055_SERIAL) += bno055_ser.o
+bno055_ser-y := bno055_ser_core.o
+# define_trace.h needs to know how to find our header
+CFLAGS_bno055_ser_trace.o := -I$(src)
+bno055_ser-$(CONFIG_TRACING) += bno055_ser_trace.o
+
+obj-$(CONFIG_BOSCH_BNO055_I2C) += bno055_i2c.o
diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
new file mode 100644
index 0000000000..52744dd98e
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.c
@@ -0,0 +1,1685 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Bosch BNO055 IMU
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * Portions of this driver are taken from the BNO055 driver patch
+ * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
+ *
+ * This driver is also based on BMI160 driver, which is:
+ *	Copyright (c) 2016, Intel Corporation.
+ *	Copyright (c) 2019, Martin Kelly.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "bno055.h"
+
+#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat"
+#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat"
+
+/* common registers */
+#define BNO055_PAGESEL_REG		0x7
+
+/* page 0 registers */
+#define BNO055_CHIP_ID_REG		0x0
+#define BNO055_CHIP_ID_MAGIC 0xA0
+#define BNO055_SW_REV_LSB_REG		0x4
+#define BNO055_SW_REV_MSB_REG		0x5
+#define BNO055_ACC_DATA_X_LSB_REG	0x8
+#define BNO055_ACC_DATA_Y_LSB_REG	0xA
+#define BNO055_ACC_DATA_Z_LSB_REG	0xC
+#define BNO055_MAG_DATA_X_LSB_REG	0xE
+#define BNO055_MAG_DATA_Y_LSB_REG	0x10
+#define BNO055_MAG_DATA_Z_LSB_REG	0x12
+#define BNO055_GYR_DATA_X_LSB_REG	0x14
+#define BNO055_GYR_DATA_Y_LSB_REG	0x16
+#define BNO055_GYR_DATA_Z_LSB_REG	0x18
+#define BNO055_EUL_DATA_X_LSB_REG	0x1A
+#define BNO055_EUL_DATA_Y_LSB_REG	0x1C
+#define BNO055_EUL_DATA_Z_LSB_REG	0x1E
+#define BNO055_QUAT_DATA_W_LSB_REG	0x20
+#define BNO055_LIA_DATA_X_LSB_REG	0x28
+#define BNO055_LIA_DATA_Y_LSB_REG	0x2A
+#define BNO055_LIA_DATA_Z_LSB_REG	0x2C
+#define BNO055_GRAVITY_DATA_X_LSB_REG	0x2E
+#define BNO055_GRAVITY_DATA_Y_LSB_REG	0x30
+#define BNO055_GRAVITY_DATA_Z_LSB_REG	0x32
+#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2)
+#define BNO055_TEMP_REG			0x34
+#define BNO055_CALIB_STAT_REG		0x35
+#define BNO055_CALIB_STAT_MAGN_SHIFT 0
+#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
+#define BNO055_CALIB_STAT_GYRO_SHIFT 4
+#define BNO055_CALIB_STAT_SYS_SHIFT 6
+#define BNO055_SYS_ERR_REG		0x3A
+#define BNO055_POWER_MODE_REG		0x3E
+#define BNO055_POWER_MODE_NORMAL 0
+#define BNO055_SYS_TRIGGER_REG		0x3F
+#define BNO055_SYS_TRIGGER_RST_SYS BIT(5)
+#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
+#define BNO055_OPR_MODE_REG		0x3D
+#define BNO055_OPR_MODE_CONFIG 0x0
+#define BNO055_OPR_MODE_AMG 0x7
+#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
+#define BNO055_OPR_MODE_FUSION 0xC
+#define BNO055_UNIT_SEL_REG		0x3B
+/* Android orientation mode means: pitch value decreases turning clockwise */
+#define BNO055_UNIT_SEL_ANDROID BIT(7)
+#define BNO055_UNIT_SEL_GYR_RPS BIT(1)
+#define BNO055_CALDATA_START		0x55
+#define BNO055_CALDATA_END		0x6A
+#define BNO055_CALDATA_LEN 22
+
+/*
+ * The difference in address between the register that contains the
+ * value and the register that contains the offset.  This applies for
+ * accel, gyro and magn channels.
+ */
+#define BNO055_REG_OFFSET_ADDR		0x4D
+
+/* page 1 registers */
+#define BNO055_PG1(x) ((x) | 0x80)
+#define BNO055_ACC_CONFIG_REG		BNO055_PG1(0x8)
+#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2)
+#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0)
+#define BNO055_MAG_CONFIG_REG		BNO055_PG1(0x9)
+#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
+#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_REG		BNO055_PG1(0xA)
+#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3)
+#define BNO055_GYR_AM_SET_REG		BNO055_PG1(0x1F)
+#define BNO055_UID_LOWER_REG		BNO055_PG1(0x50)
+#define BNO055_UID_HIGHER_REG		BNO055_PG1(0x5F)
+#define BNO055_UID_LEN 16
+
+struct bno055_sysfs_attr {
+	int *vals;
+	int len;
+	int *fusion_vals;
+	int *hw_xlate;
+	int type;
+};
+
+static int bno055_acc_lpf_vals[] = {
+	7, 810000, 15, 630000, 31, 250000, 62, 500000,
+	125, 0, 250, 0, 500, 0, 1000, 0,
+};
+
+static struct bno055_sysfs_attr bno055_acc_lpf = {
+	.vals = bno055_acc_lpf_vals,
+	.len = ARRAY_SIZE(bno055_acc_lpf_vals),
+	.fusion_vals = (int[]){62, 500000},
+	.type = IIO_VAL_INT_PLUS_MICRO,
+};
+
+static int bno055_acc_range_vals[] = {
+  /* G:    2,    4,    8,    16 */
+	1962, 3924, 7848, 15696
+};
+
+static struct bno055_sysfs_attr bno055_acc_range = {
+	.vals = bno055_acc_range_vals,
+	.len = ARRAY_SIZE(bno055_acc_range_vals),
+	.fusion_vals = (int[]){3924}, /* 4G */
+	.type = IIO_VAL_INT,
+};
+
+/*
+ * Theoretically the IMU should return data in a given (i.e. fixed) unit
+ * regardless of the range setting. This happens for the accelerometer, but not
+ * for the gyroscope; the gyroscope range setting affects the scale.
+ * This is probably due to this[0] bug.
+ * For this reason we map the internal range setting onto the standard IIO scale
+ * attribute for gyro.
+ * Since the bug[0] may be fixed in future, we check for the IMU FW version and
+ * eventually warn the user.
+ * Currently we just don't care about "range" attributes for gyro.
+ *
+ * [0]  https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266
+ */
+
+/*
+ * dps = hwval * (dps_range/2^15)
+ * rps = hwval * (rps_range/2^15)
+ *     = hwval * (dps_range/(2^15 * k))
+ * where k is rad-to-deg factor
+ */
+static int bno055_gyr_scale_vals[] = {
+	125, 1877467, 250, 1877467, 500, 1877467,
+	1000, 1877467, 2000, 1877467,
+};
+
+static struct bno055_sysfs_attr bno055_gyr_scale = {
+	.vals = bno055_gyr_scale_vals,
+	.len = ARRAY_SIZE(bno055_gyr_scale_vals),
+	.fusion_vals = (int[]){1, 900},
+	.hw_xlate = (int[]){4, 3, 2, 1, 0},
+	.type = IIO_VAL_FRACTIONAL,
+};
+
+static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523};
+static struct bno055_sysfs_attr bno055_gyr_lpf = {
+	.vals = bno055_gyr_lpf_vals,
+	.len = ARRAY_SIZE(bno055_gyr_lpf_vals),
+	.fusion_vals = (int[]){32},
+	.hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0},
+	.type = IIO_VAL_INT,
+};
+
+static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
+static struct bno055_sysfs_attr bno055_mag_odr = {
+	.vals = bno055_mag_odr_vals,
+	.len =  ARRAY_SIZE(bno055_mag_odr_vals),
+	.fusion_vals = (int[]){20},
+	.type = IIO_VAL_INT,
+};
+
+struct bno055_priv {
+	struct regmap *regmap;
+	struct device *dev;
+	struct clk *clk;
+	int operation_mode;
+	int xfer_burst_break_thr;
+	struct mutex lock;
+	u8 uid[BNO055_UID_LEN];
+	struct gpio_desc *reset_gpio;
+	bool sw_reset;
+	struct {
+		__le16 chans[BNO055_SCAN_CH_COUNT];
+		s64 timestamp __aligned(8);
+	} buf;
+	struct dentry *debugfs;
+};
+
+static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return true;
+
+	/* when in fusion mode, config is updated by chip */
+	if (reg == BNO055_MAG_CONFIG_REG ||
+	    reg == BNO055_ACC_CONFIG_REG ||
+	    reg == BNO055_GYR_CONFIG_REG)
+		return true;
+
+	/* calibration data may be updated by the IMU */
+	if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END)
+		return true;
+
+	return false;
+}
+
+static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
+{
+	/* unnamed PG0 reserved areas */
+	if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) ||
+	    reg == 0x3C)
+		return false;
+
+	/* unnamed PG1 reserved areas */
+	if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) ||
+	    (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) ||
+	    reg == BNO055_PG1(0xE) ||
+	    (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0)))
+		return false;
+	return true;
+}
+
+static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Unreadable registers are indeed reserved; there are no WO regs
+	 * (except for a single bit in SYS_TRIGGER register)
+	 */
+	if (!bno055_regmap_readable(dev, reg))
+		return false;
+
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return false;
+
+	/* ID areas */
+	if (reg < BNO055_PAGESEL_REG ||
+	    (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG))
+		return false;
+
+	return true;
+}
+
+static const struct regmap_range_cfg bno055_regmap_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x7f * 2,
+		.selector_reg = BNO055_PAGESEL_REG,
+		.selector_mask = GENMASK(7, 0),
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x80,
+	},
+};
+
+const struct regmap_config bno055_regmap_config = {
+	.name = "bno055",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = bno055_regmap_ranges,
+	.num_ranges = 1,
+	.volatile_reg = bno055_regmap_volatile,
+	.max_register = 0x80 * 2,
+	.writeable_reg = bno055_regmap_writeable,
+	.readable_reg = bno055_regmap_readable,
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055);
+
+/* must be called in configuration mode */
+static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len)
+{
+	if (len != BNO055_CALDATA_LEN) {
+		dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)",
+			len, BNO055_CALDATA_LEN);
+		return -EINVAL;
+	}
+
+	dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data);
+	return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
+				 data, BNO055_CALDATA_LEN);
+}
+
+static int bno055_operation_mode_do_set(struct bno055_priv *priv,
+					int operation_mode)
+{
+	int ret;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   operation_mode);
+	if (ret)
+		return ret;
+
+	/* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */
+	msleep(20);
+
+	return 0;
+}
+
+static int bno055_system_reset(struct bno055_priv *priv)
+{
+	int ret;
+
+	if (priv->reset_gpio) {
+		gpiod_set_value_cansleep(priv->reset_gpio, 0);
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	} else if (priv->sw_reset) {
+		ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+				   BNO055_SYS_TRIGGER_RST_SYS);
+		if (ret)
+			return ret;
+	} else {
+		return 0;
+	}
+
+	regcache_drop_region(priv->regmap, 0x0, 0xff);
+	usleep_range(650000, 700000);
+
+	return 0;
+}
+
+static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len)
+{
+	int ret;
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG,
+			   BNO055_POWER_MODE_NORMAL);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+			   priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0);
+	if (ret)
+		return ret;
+
+	/* use standard SI units */
+	ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG,
+			   BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS);
+	if (ret)
+		return ret;
+
+	if (caldata) {
+		ret = bno055_calibration_load(priv, caldata, len);
+		if (ret)
+			dev_warn(priv->dev, "failed to load calibration data with error %d\n",
+				 ret);
+	}
+
+	return 0;
+}
+
+static ssize_t bno055_operation_mode_set(struct bno055_priv *priv,
+					 int operation_mode)
+{
+	u8 caldata[BNO055_CALDATA_LEN];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	if (operation_mode == BNO055_OPR_MODE_FUSION ||
+	    operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) {
+		/* for entering fusion mode, reset the chip to clear the algo state */
+		ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata,
+				       BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_system_reset(priv);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+	}
+
+	ret = bno055_operation_mode_do_set(priv, operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	priv->operation_mode = operation_mode;
+
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static void bno055_uninit(void *arg)
+{
+	struct bno055_priv *priv = arg;
+
+	/* stop the IMU */
+	bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+}
+
+#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) {	\
+	.address = _address,							\
+	.type = _type,								\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_##_axis,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh),		\
+	.info_mask_shared_by_type_available = _avail,				\
+	.scan_index = _index,							\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+		.repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0,        \
+	},									\
+}
+
+/* scan indexes follow DATA register order */
+enum bno055_scan_axis {
+	BNO055_SCAN_ACCEL_X,
+	BNO055_SCAN_ACCEL_Y,
+	BNO055_SCAN_ACCEL_Z,
+	BNO055_SCAN_MAGN_X,
+	BNO055_SCAN_MAGN_Y,
+	BNO055_SCAN_MAGN_Z,
+	BNO055_SCAN_GYRO_X,
+	BNO055_SCAN_GYRO_Y,
+	BNO055_SCAN_GYRO_Z,
+	BNO055_SCAN_YAW,
+	BNO055_SCAN_ROLL,
+	BNO055_SCAN_PITCH,
+	BNO055_SCAN_QUATERNION,
+	BNO055_SCAN_LIA_X,
+	BNO055_SCAN_LIA_Y,
+	BNO055_SCAN_LIA_Z,
+	BNO055_SCAN_GRAVITY_X,
+	BNO055_SCAN_GRAVITY_Y,
+	BNO055_SCAN_GRAVITY_Z,
+	BNO055_SCAN_TIMESTAMP,
+	_BNO055_SCAN_MAX
+};
+
+static const struct iio_chan_spec bno055_channels[] = {
+	/* accelerometer */
+	BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
+		       BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
+		       BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
+		       BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	/* gyroscope */
+	BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
+		       BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
+		       BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
+		       BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	/* magnetometer */
+	BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
+		       BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
+		       BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
+		       BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	/* euler angle */
+	BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW,
+		       BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL,
+		       BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH,
+		       BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0),
+	/* quaternion */
+	BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
+		       BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0),
+
+	/* linear acceleration */
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X,
+		       BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y,
+		       BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z,
+		       BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0),
+
+	/* gravity vector */
+	BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
+		       BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
+		       BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
+		       BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0),
+
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1,
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
+};
+
+static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int hwval, idx;
+	int ret;
+	int i;
+
+	ret = regmap_read(priv->regmap, reg, &hwval);
+	if (ret)
+		return ret;
+
+	idx = (hwval & mask) >> shift;
+	if (attr->hw_xlate)
+		for (i = 0; i < attr->len; i++)
+			if (attr->hw_xlate[i] == idx) {
+				idx = i;
+				break;
+			}
+	if (attr->type == IIO_VAL_INT) {
+		*val = attr->vals[idx];
+	} else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */
+		*val = attr->vals[idx * 2];
+		*val2 = attr->vals[idx * 2 + 1];
+	}
+
+	return attr->type;
+}
+
+static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int best_delta;
+	int req_val;
+	int tbl_val;
+	bool first;
+	int delta;
+	int hwval;
+	int ret;
+	int len;
+	int i;
+
+	/*
+	 * The closest value the HW supports is only one in fusion mode,
+	 * and it is autoselected, so don't do anything, just return OK,
+	 * as the closest possible value has been (virtually) selected
+	 */
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return 0;
+
+	len = attr->len;
+
+	/*
+	 * We always get a request in INT_PLUS_MICRO, but we
+	 * take care of the micro part only when we really have
+	 * non-integer tables. This prevents 32-bit overflow with
+	 * larger integers contained in integer tables.
+	 */
+	req_val = val;
+	if (attr->type != IIO_VAL_INT) {
+		len /= 2;
+		req_val = min(val, 2147) * 1000000 + val2;
+	}
+
+	first = true;
+	for (i = 0; i < len; i++) {
+		switch (attr->type) {
+		case IIO_VAL_INT:
+			tbl_val = attr->vals[i];
+			break;
+		case IIO_VAL_INT_PLUS_MICRO:
+			WARN_ON(attr->vals[i * 2] > 2147);
+			tbl_val = attr->vals[i * 2] * 1000000 +
+				attr->vals[i * 2 + 1];
+			break;
+		case IIO_VAL_FRACTIONAL:
+			WARN_ON(attr->vals[i * 2] > 4294);
+			tbl_val = attr->vals[i * 2] * 1000000 /
+				attr->vals[i * 2 + 1];
+			break;
+		default:
+			return -EINVAL;
+		}
+		delta = abs(tbl_val - req_val);
+		if (first || delta < best_delta) {
+			best_delta = delta;
+			hwval = i;
+			first = false;
+		}
+	}
+
+	if (attr->hw_xlate)
+		hwval = attr->hw_xlate[hwval];
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift);
+	if (ret)
+		return ret;
+
+	return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG);
+}
+
+static int bno055_read_simple_chan(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   int *val, int *val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_val;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_bulk_read(priv->regmap, chan->address,
+				       &raw_val, sizeof(raw_val));
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(le16_to_cpu(raw_val), 15);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+			*val = 0;
+		} else {
+			ret = regmap_bulk_read(priv->regmap,
+					       chan->address +
+					       BNO055_REG_OFFSET_ADDR,
+					       &raw_val, sizeof(raw_val));
+			if (ret < 0)
+				return ret;
+			/*
+			 * IMU reports sensor offsets; IIO wants correction
+			 * offsets, thus we need the 'minus' here.
+			 */
+			*val = -sign_extend32(le16_to_cpu(raw_val), 15);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		switch (chan->type) {
+		case IIO_GRAVITY:
+			/* Table 3-35: 1 m/s^2 = 100 LSB */
+		case IIO_ACCEL:
+			/* Table 3-17: 1 m/s^2 = 100 LSB */
+			*val2 = 100;
+			break;
+		case IIO_MAGN:
+			/*
+			 * Table 3-19: 1 uT = 16 LSB.  But we need
+			 * Gauss: 1G = 0.1 uT.
+			 */
+			*val2 = 160;
+			break;
+		case IIO_ANGL_VEL:
+			/*
+			 * Table 3-22: 1 Rps = 900 LSB
+			 * .. but this is not exactly true. See comment at the
+			 * beginning of this file.
+			 */
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				*val = bno055_gyr_scale.fusion_vals[0];
+				*val2 = bno055_gyr_scale.fusion_vals[1];
+				return IIO_VAL_FRACTIONAL;
+			}
+
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+			break;
+		case IIO_ROT:
+			/* Table 3-28: 1 degree = 16 LSB */
+			*val2 = 16;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_FRACTIONAL;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		return bno055_get_regmask(priv, val, val2,
+					  BNO055_MAG_CONFIG_REG,
+					  BNO055_MAG_CONFIG_ODR_MASK,
+					  &bno055_mag_odr);
+
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_ACCEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr,
+				   const int **vals, int *length)
+{
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+		/* locked when fusion enabled */
+		*vals = attr->fusion_vals;
+		if (attr->type == IIO_VAL_INT)
+			*length = 1;
+		else
+			*length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/
+	} else {
+		*vals = attr->vals;
+		*length = attr->len;
+	}
+
+	return attr->type;
+}
+
+static int bno055_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		case IIO_ACCEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_MAGN:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	unsigned int raw_val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
+	 * ABI wants milliC.
+	 */
+	*val = raw_val * 1000;
+
+	return IIO_VAL_INT;
+}
+
+static int bno055_read_quaternion(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_vals[4];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (size < 4)
+			return -EINVAL;
+		ret = regmap_bulk_read(priv->regmap,
+				       BNO055_QUAT_DATA_W_LSB_REG,
+				       raw_vals, sizeof(raw_vals));
+		if (ret < 0)
+			return ret;
+		for (i = 0; i < 4; i++)
+			vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15);
+		*val_len = 4;
+		return IIO_VAL_INT_MULTIPLE;
+	case IIO_CHAN_INFO_SCALE:
+		/* Table 3-31: 1 quaternion = 2^14 LSB */
+		if (size < 2)
+			return -EINVAL;
+		vals[0] = 1;
+		vals[1] = 14;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool bno055_is_chan_readable(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return true;
+
+	switch (chan->type) {
+	case IIO_GRAVITY:
+	case IIO_ROT:
+		return false;
+	case IIO_ACCEL:
+		if (chan->channel2 == IIO_MOD_LINEAR_X ||
+		    chan->channel2 == IIO_MOD_LINEAR_Y ||
+		    chan->channel2 == IIO_MOD_LINEAR_Z)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
+
+static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	if (!bno055_is_chan_readable(indio_dev, chan))
+		return -EBUSY;
+
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_ACCEL:
+	case IIO_ANGL_VEL:
+	case IIO_GRAVITY:
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	case IIO_TEMP:
+		*val_len = 1;
+		return bno055_read_temp_chan(indio_dev, &vals[0]);
+	case IIO_ROT:
+		/*
+		 * Rotation is exposed as either a quaternion or three
+		 * Euler angles.
+		 */
+		if (chan->channel2 == IIO_MOD_QUATERNION)
+			return bno055_read_quaternion(indio_dev, chan,
+						      size, vals,
+						      val_len, mask);
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_raw_multi(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int size, int *vals, int *val_len,
+				 long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_read_raw_multi(indio_dev, chan, size,
+				     vals, val_len, mask);
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int _bno055_write_raw(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	switch (chan->type) {
+	case IIO_MAGN:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_MAG_CONFIG_REG,
+						  BNO055_MAG_CONFIG_ODR_MASK,
+						  &bno055_mag_odr);
+		default:
+			return -EINVAL;
+		}
+	case IIO_ACCEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_ANGL_VEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_CHAN_INFO_SCALE:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_write_raw(struct iio_dev *iio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static ssize_t in_accel_range_raw_available_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int len = 0;
+	int i;
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]);
+
+	for (i = 0; i < bno055_acc_range.len; i++)
+		len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t fusion_enable_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode != BNO055_OPR_MODE_AMG);
+}
+
+static ssize_t fusion_enable_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	bool en;
+	int ret;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	ret = kstrtobool(buf, &en);
+	if (ret)
+		return -EINVAL;
+
+	if (!en)
+		return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len;
+
+	/*
+	 * Coming from AMG means the FMC was off, just switch to fusion but
+	 * don't change anything that doesn't belong to us (i.e let FMC stay off).
+	 * Coming from any other fusion mode means we don't need to do anything.
+	 */
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+		return  bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len;
+
+	return len;
+}
+
+static ssize_t in_magn_calibration_fast_enable_show(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode == BNO055_OPR_MODE_FUSION);
+}
+
+static ssize_t in_magn_calibration_fast_enable_store(struct device *dev,
+						     struct device_attribute *attr,
+						     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	if (sysfs_streq(buf, "0")) {
+		if (priv->operation_mode == BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+			if (ret)
+				return ret;
+		}
+	} else {
+		if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+			return -EINVAL;
+
+		if (priv->operation_mode != BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return len;
+}
+
+static ssize_t in_accel_range_raw_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int val;
+	int ret;
+
+	ret = bno055_get_regmask(priv, &val, NULL,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t in_accel_range_raw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_set_regmask(priv, val, 0,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	mutex_unlock(&priv->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int calib;
+	int ret;
+	int val;
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
+	    (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
+	     which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
+		calib = 0;
+	} else {
+		mutex_lock(&priv->lock);
+		ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val);
+		mutex_unlock(&priv->lock);
+
+		if (ret)
+			return -EIO;
+
+		calib = ((val >> which) & GENMASK(1, 0)) + 1;
+	}
+
+	return sysfs_emit(buf, "%d\n", calib);
+}
+
+static ssize_t serialnumber_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid);
+}
+
+static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr, char *buf,
+				     loff_t pos, size_t count)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj)));
+	u8 data[BNO055_CALDATA_LEN];
+	int ret;
+
+	/*
+	 * Calibration data is volatile; reading it in chunks will possibly
+	 * results in inconsistent data. We require the user to read the whole
+	 * blob in a single chunk
+	 */
+	if (count < BNO055_CALDATA_LEN || pos)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
+			       BNO055_CALDATA_LEN);
+	if (ret)
+		goto exit_unlock;
+
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	memcpy(buf, data, BNO055_CALDATA_LEN);
+
+	ret = BNO055_CALDATA_LEN;
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static ssize_t sys_calibration_auto_status_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
+}
+
+static ssize_t in_accel_calibration_auto_status_show(struct device *dev,
+						     struct device_attribute *a,
+						     char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
+}
+
+static ssize_t in_gyro_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
+}
+
+static ssize_t in_magn_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
+}
+
+static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+				     unsigned int writeval, unsigned int *readval)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	if (readval)
+		return regmap_read(priv->regmap, reg, readval);
+	else
+		return regmap_write(priv->regmap, reg, writeval);
+}
+
+static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf,
+				      size_t count, loff_t *ppos)
+{
+	struct bno055_priv *priv = file->private_data;
+	int rev, ver;
+	char *buf;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations bno055_fw_version_ops = {
+	.open = simple_open,
+	.read = bno055_show_fw_version,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static void bno055_debugfs_remove(void *_priv)
+{
+	struct bno055_priv *priv = _priv;
+
+	debugfs_remove(priv->debugfs);
+	priv->debugfs = NULL;
+}
+
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	priv->debugfs = debugfs_create_file("firmware_version", 0400,
+					    iio_get_debugfs_dentry(iio_dev),
+					    priv, &bno055_fw_version_ops);
+	if (!IS_ERR(priv->debugfs))
+		devm_add_action_or_reset(priv->dev, bno055_debugfs_remove,
+					 priv);
+	if (IS_ERR_OR_NULL(priv->debugfs))
+		dev_warn(priv->dev, "failed to setup debugfs");
+}
+
+static IIO_DEVICE_ATTR_RW(fusion_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_magn_calibration_fast_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_accel_range_raw, 0);
+
+static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0);
+static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(serialnumber, 0);
+
+static struct attribute *bno055_attrs[] = {
+	&iio_dev_attr_in_accel_range_raw_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_range_raw.dev_attr.attr,
+	&iio_dev_attr_fusion_enable.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr,
+	&iio_dev_attr_sys_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_serialnumber.dev_attr.attr,
+	NULL
+};
+
+static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN);
+
+static struct bin_attribute *bno055_bin_attrs[] = {
+	&bin_attr_calibration_data,
+	NULL
+};
+
+static const struct attribute_group bno055_attrs_group = {
+	.attrs = bno055_attrs,
+	.bin_attrs = bno055_bin_attrs,
+};
+
+static const struct iio_info bno055_info = {
+	.read_raw_multi = bno055_read_raw_multi,
+	.read_avail = bno055_read_avail,
+	.write_raw = bno055_write_raw,
+	.attrs = &bno055_attrs_group,
+	.debugfs_reg_access = bno055_debugfs_reg_access,
+};
+
+/*
+ * Reads len samples from the HW, stores them in buf starting from buf_idx,
+ * and applies mask to cull (skip) unneeded samples.
+ * Updates buf_idx incrementing with the number of stored samples.
+ * Samples from HW are transferred into buf, then in-place copy on buf is
+ * performed in order to cull samples that need to be skipped.
+ * This avoids copies of the first samples until we hit the 1st sample to skip,
+ * and also avoids having an extra bounce buffer.
+ * buf must be able to contain len elements in spite of how many samples we are
+ * going to cull.
+ */
+static int bno055_scan_xfer(struct bno055_priv *priv,
+			    int start_ch, int len, unsigned long mask,
+			    __le16 *buf, int *buf_idx)
+{
+	const int base = BNO055_ACC_DATA_X_LSB_REG;
+	bool quat_in_read = false;
+	int buf_base = *buf_idx;
+	__le16 *dst, *src;
+	int offs_fixup = 0;
+	int xfer_len = len;
+	int ret;
+	int i, n;
+
+	if (!mask)
+		return 0;
+
+	/*
+	 * All channels are made up 1 16-bit sample, except for quaternion that
+	 * is made up 4 16-bit values.
+	 * For us the quaternion CH is just like 4 regular CHs.
+	 * If our read starts past the quaternion make sure to adjust the
+	 * starting offset; if the quaternion is contained in our scan then make
+	 * sure to adjust the read len.
+	 */
+	if (start_ch > BNO055_SCAN_QUATERNION) {
+		start_ch += 3;
+	} else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
+		 ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
+		quat_in_read = true;
+		xfer_len += 3;
+	}
+
+	ret = regmap_bulk_read(priv->regmap,
+			       base + start_ch * sizeof(__le16),
+			       buf + buf_base,
+			       xfer_len * sizeof(__le16));
+	if (ret)
+		return ret;
+
+	for_each_set_bit(i, &mask, len) {
+		if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
+			offs_fixup = 3;
+
+		dst = buf + *buf_idx;
+		src = buf + buf_base + offs_fixup + i;
+
+		n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1;
+
+		if (dst != src)
+			memcpy(dst, src, n * sizeof(__le16));
+
+		*buf_idx += n;
+	}
+	return 0;
+}
+
+static irqreturn_t bno055_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int xfer_start, start, end, prev_end;
+	unsigned long mask;
+	int quat_extra_len;
+	bool first = true;
+	int buf_idx = 0;
+	bool thr_hit;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Walk the bitmap and eventually perform several transfers.
+	 * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr
+	 * will be included in same transfer.
+	 * Every time the bitmap contains a gap wider than xfer_burst_break_thr
+	 * then we split the transfer, skipping the gap.
+	 */
+	for_each_set_bitrange(start, end, iio_dev->active_scan_mask,
+			      iio_dev->masklength) {
+		/*
+		 * First transfer will start from the beginning of the first
+		 * ones-field in the bitmap
+		 */
+		if (first) {
+			xfer_start = start;
+		} else {
+			/*
+			 * We found the next ones-field; check whether to
+			 * include it in * the current transfer or not (i.e.
+			 * let's perform the current * transfer and prepare for
+			 * another one).
+			 */
+
+			/*
+			 * In case the zeros-gap contains the quaternion bit,
+			 * then its length is actually 4 words instead of 1
+			 * (i.e. +3 wrt other channels).
+			 */
+			quat_extra_len = ((start > BNO055_SCAN_QUATERNION) &&
+					  (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
+
+			/* If the gap is wider than xfer_burst_break_thr then.. */
+			thr_hit = (start - prev_end + quat_extra_len) >
+				priv->xfer_burst_break_thr;
+
+			/*
+			 * .. transfer all the data up to the gap. Then set the
+			 * next transfer start index at right after the gap
+			 * (i.e. at the start of this ones-field).
+			 */
+			if (thr_hit) {
+				mask = *iio_dev->active_scan_mask >> xfer_start;
+				ret = bno055_scan_xfer(priv, xfer_start,
+						       prev_end - xfer_start,
+						       mask, priv->buf.chans, &buf_idx);
+				if (ret)
+					goto done;
+				xfer_start = start;
+			}
+		}
+		first = false;
+		prev_end = end;
+	}
+
+	/*
+	 * We finished walking the bitmap; no more gaps to check for. Just
+	 * perform the current transfer.
+	 */
+	mask = *iio_dev->active_scan_mask >> xfer_start;
+	ret = bno055_scan_xfer(priv, xfer_start,
+			       prev_end - xfer_start,
+			       mask, priv->buf.chans, &buf_idx);
+
+	if (!ret)
+		iio_push_to_buffers_with_timestamp(iio_dev,
+						   &priv->buf, pf->timestamp);
+done:
+	mutex_unlock(&priv->lock);
+	iio_trigger_notify_done(iio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int bno055_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	const unsigned long fusion_mask =
+		BIT(BNO055_SCAN_YAW) |
+		BIT(BNO055_SCAN_ROLL) |
+		BIT(BNO055_SCAN_PITCH) |
+		BIT(BNO055_SCAN_QUATERNION) |
+		BIT(BNO055_SCAN_LIA_X) |
+		BIT(BNO055_SCAN_LIA_Y) |
+		BIT(BNO055_SCAN_LIA_Z) |
+		BIT(BNO055_SCAN_GRAVITY_X) |
+		BIT(BNO055_SCAN_GRAVITY_Y) |
+		BIT(BNO055_SCAN_GRAVITY_Z);
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG &&
+	    bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask,
+			      _BNO055_SCAN_MAX))
+		return -EBUSY;
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = {
+	.preenable = bno055_buffer_preenable,
+};
+
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset)
+{
+	const struct firmware *caldata = NULL;
+	struct bno055_priv *priv;
+	struct iio_dev *iio_dev;
+	char *fw_name_buf;
+	unsigned int val;
+	int rev, ver;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	iio_dev->name = "bno055";
+	priv = iio_priv(iio_dev);
+	mutex_init(&priv->lock);
+	priv->regmap = regmap;
+	priv->dev = dev;
+	priv->xfer_burst_break_thr = xfer_burst_break_thr;
+	priv->sw_reset = sw_reset;
+
+	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n");
+
+	priv->clk = devm_clk_get_optional_enabled(dev, "clk");
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n");
+
+	if (priv->reset_gpio) {
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+		usleep_range(650000, 750000);
+	} else if (!sw_reset) {
+		dev_warn(dev, "No usable reset method; IMU may be unreliable\n");
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val);
+	if (ret)
+		return ret;
+
+	if (val != BNO055_CHIP_ID_MAGIC)
+		dev_warn(dev, "Unrecognized chip ID 0x%x\n", val);
+
+	/*
+	 * In case we haven't a HW reset pin, we can still reset the chip via
+	 * register write. This is probably nonsense in case we can't even
+	 * communicate with the chip or the chip isn't the one we expect (i.e.
+	 * we don't write to unknown chips), so we perform SW reset only after
+	 * chip magic ID check
+	 */
+	if (!priv->reset_gpio) {
+		ret = bno055_system_reset(priv);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	/*
+	 * The stock FW version contains a bug (see comment at the beginning of
+	 * this file) that causes the anglvel scale to be changed depending on
+	 * the chip range setting. We workaround this, but we don't know what
+	 * other FW versions might do.
+	 */
+	if (ver != 0x3 || rev != 0x11)
+		dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n");
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG,
+			       priv->uid, BNO055_UID_LEN);
+	if (ret)
+		return ret;
+
+	/* Sensor calibration data */
+	fw_name_buf = kasprintf(GFP_KERNEL, BNO055_FW_UID_FMT,
+				BNO055_UID_LEN, priv->uid);
+	if (!fw_name_buf)
+		return -ENOMEM;
+
+	ret = request_firmware(&caldata, fw_name_buf, dev);
+	kfree(fw_name_buf);
+	if (ret)
+		ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev);
+	if (ret) {
+		dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n");
+		ret = bno055_init(priv, NULL, 0);
+	} else {
+		ret = bno055_init(priv, caldata->data, caldata->size);
+		release_firmware(caldata);
+	}
+	if (ret)
+		return ret;
+
+	priv->operation_mode = BNO055_OPR_MODE_FUSION;
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_uninit, priv);
+	if (ret)
+		return ret;
+
+	iio_dev->channels = bno055_channels;
+	iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
+	iio_dev->info = &bno055_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_triggered_buffer_setup(dev, iio_dev,
+					      iio_pollfunc_store_time,
+					      bno055_trigger_handler,
+					      &bno055_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, iio_dev);
+	if (ret)
+		return ret;
+
+	bno055_debugfs_init(iio_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
new file mode 100644
index 0000000000..64f9fc95ce
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __BNO055_H__
+#define __BNO055_H__
+
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct device;
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset);
+extern const struct regmap_config bno055_regmap_config;
+
+#endif
diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c
new file mode 100644
index 0000000000..6ecd750c6b
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_i2c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for I2C-interfaced Bosch BNO055 IMU.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bno055.h"
+
+#define BNO055_I2C_XFER_BURST_BREAK_THRESHOLD 3
+
+static int bno055_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &bno055_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "Unable to init register map");
+
+	return bno055_probe(&client->dev, regmap,
+			    BNO055_I2C_XFER_BURST_BREAK_THRESHOLD, true);
+}
+
+static const struct i2c_device_id bno055_i2c_id[] = {
+	{"bno055", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bno055_i2c_id);
+
+static const struct of_device_id __maybe_unused bno055_i2c_of_match[] = {
+	{ .compatible = "bosch,bno055" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bno055_i2c_of_match);
+
+static struct i2c_driver bno055_driver = {
+	.driver = {
+		.name = "bno055-i2c",
+		.of_match_table = bno055_i2c_of_match,
+	},
+	.probe = bno055_i2c_probe,
+	.id_table = bno055_i2c_id,
+};
+module_i2c_driver(bno055_driver);
+
+MODULE_AUTHOR("Andrea Merello");
+MODULE_DESCRIPTION("Bosch BNO055 I2C interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c
new file mode 100644
index 0000000000..57728a5684
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_core.c
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Serial line interface for Bosh BNO055 IMU (via serdev).
+ * This file implements serial communication up to the register read/write
+ * level.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * This driver is based on
+ *	Plantower PMS7003 particulate matter sensor driver
+ *	Which is
+ *	Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/serdev.h>
+
+#include "bno055_ser_trace.h"
+#include "bno055.h"
+
+/*
+ * Register writes cmd have the following format
+ * +------+------+-----+-----+----- ... ----+
+ * | 0xAA | 0xOO | REG | LEN | payload[LEN] |
+ * +------+------+-----+-----+----- ... ----+
+ *
+ * Register write responses have the following format
+ * +------+----------+
+ * | 0xEE | ERROCODE |
+ * +------+----------+
+ *
+ * .. except when writing the SYS_RST bit (i.e. triggering a system reset); in
+ * case the IMU accepts the command, then it resets without responding. We don't
+ * handle this (yet) here (so we inform the common bno055 code not to perform
+ * sw resets - bno055 on serial bus basically requires the hw reset pin).
+ *
+ * Register read have the following format
+ * +------+------+-----+-----+
+ * | 0xAA | 0xO1 | REG | LEN |
+ * +------+------+-----+-----+
+ *
+ * Successful register read response have the following format
+ * +------+-----+----- ... ----+
+ * | 0xBB | LEN | payload[LEN] |
+ * +------+-----+----- ... ----+
+ *
+ * Failed register read response have the following format
+ * +------+--------+
+ * | 0xEE | ERRCODE|  (ERRCODE always > 1)
+ * +------+--------+
+ *
+ * Error codes are
+ * 01: OK
+ * 02: read/write FAIL
+ * 04: invalid address
+ * 05: write on RO
+ * 06: wrong start byte
+ * 07: bus overrun
+ * 08: len too high
+ * 09: len too low
+ * 10: bus RX byte timeout (timeout is 30mS)
+ *
+ *
+ * **WORKAROUND ALERT**
+ *
+ * Serial communication seems very fragile: the BNO055 buffer seems to overflow
+ * very easy; BNO055 seems able to sink few bytes, then it needs a brief pause.
+ * On the other hand, it is also picky on timeout: if there is a pause > 30mS in
+ * between two bytes then the transaction fails (IMU internal RX FSM resets).
+ *
+ * BNO055 has been seen also failing to process commands in case we send them
+ * too close each other (or if it is somehow busy?)
+ *
+ * In particular I saw these scenarios:
+ * 1) If we send 2 bytes per time, then the IMU never(?) overflows.
+ * 2) If we send 4 bytes per time (i.e. the full header), then the IMU could
+ *    overflow, but it seem to sink all 4 bytes, then it returns error.
+ * 3) If we send more than 4 bytes, the IMU could overflow, and I saw it sending
+ *    error after 4 bytes are sent; we have troubles in synchronizing again,
+ *    because we are still sending data, and the IMU interprets it as the 1st
+ *    byte of a new command.
+ *
+ * While we must avoid case 3, we could send 4 bytes per time and eventually
+ * retry in case of failure; this seemed convenient for reads (which requires
+ * TXing exactly 4 bytes), however it has been seen that, depending by the IMU
+ * settings (e.g. LPF), failures became less or more frequent; in certain IMU
+ * configurations they are very rare, but in certain others we keeps failing
+ * even after like 30 retries.
+ *
+ * So, we just split TXes in [2-bytes + delay] steps, and still keep an eye on
+ * the IMU response; in case it overflows (which is now unlikely), we retry.
+ */
+
+/*
+ * Read operation overhead:
+ *  4 bytes req + 2byte resp hdr.
+ *  6 bytes = 60 bit (considering 1start + 1stop bits).
+ *  60/115200 = ~520uS + about 2500mS delay -> ~3mS
+ * In 3mS we could read back about 34 bytes that means 17 samples, this means
+ * that in case of scattered reads in which the gap is 17 samples or less it is
+ * still convenient to go for a burst.
+ * We have to take into account also IMU response time - IMU seems to be often
+ * reasonably quick to respond, but sometimes it seems to be in some "critical
+ * section" in which it delays handling of serial protocol. Because of this we
+ * round-up to 22, which is the max number of samples, always bursting indeed.
+ */
+#define BNO055_SER_XFER_BURST_BREAK_THRESHOLD 22
+
+struct bno055_ser_priv {
+	enum {
+		CMD_NONE,
+		CMD_READ,
+		CMD_WRITE,
+	} expect_response;
+	int expected_data_len;
+	u8 *response_buf;
+
+	/**
+	 * enum cmd_status - represent the status of a command sent to the HW.
+	 * @STATUS_CRIT: The command failed: the serial communication failed.
+	 * @STATUS_OK:   The command executed successfully.
+	 * @STATUS_FAIL: The command failed: HW responded with an error.
+	 */
+	enum {
+		STATUS_CRIT = -1,
+		STATUS_OK = 0,
+		STATUS_FAIL = 1,
+	} cmd_status;
+
+	/*
+	 * Protects all the above fields, which are accessed in behalf of both
+	 * the serdev RX callback and the regmap side
+	 */
+	struct mutex lock;
+
+	/* Only accessed in serdev RX callback context*/
+	struct {
+		enum {
+			RX_IDLE,
+			RX_START,
+			RX_DATA,
+		} state;
+		int databuf_count;
+		int expected_len;
+		int type;
+	} rx;
+
+	/* Never accessed in behalf of serdev RX callback context */
+	bool cmd_stale;
+
+	struct completion cmd_complete;
+	struct serdev_device *serdev;
+};
+
+static int bno055_ser_send_chunk(struct bno055_ser_priv *priv, const u8 *data, int len)
+{
+	int ret;
+
+	trace_send_chunk(len, data);
+	ret = serdev_device_write(priv->serdev, data, len, msecs_to_jiffies(25));
+	if (ret < 0)
+		return ret;
+
+	if (ret < len)
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Send a read or write command.
+ * 'data' can be NULL (used in read case). 'len' parameter is always valid; in
+ * case 'data' is non-NULL then it must match 'data' size.
+ */
+static int bno055_ser_do_send_cmd(struct bno055_ser_priv *priv,
+				  bool read, int addr, int len, const u8 *data)
+{
+	u8 hdr[] = {0xAA, read, addr, len};
+	int chunk_len;
+	int ret;
+
+	ret = bno055_ser_send_chunk(priv, hdr, 2);
+	if (ret)
+		goto fail;
+	usleep_range(2000, 3000);
+	ret = bno055_ser_send_chunk(priv, hdr + 2, 2);
+	if (ret)
+		goto fail;
+
+	if (read)
+		return 0;
+
+	while (len) {
+		chunk_len = min(len, 2);
+		usleep_range(2000, 3000);
+		ret = bno055_ser_send_chunk(priv, data, chunk_len);
+		if (ret)
+			goto fail;
+		data += chunk_len;
+		len -= chunk_len;
+	}
+
+	return 0;
+fail:
+	/* waiting more than 30mS should clear the BNO055 internal state */
+	usleep_range(40000, 50000);
+	return ret;
+}
+
+static int bno055_ser_send_cmd(struct bno055_ser_priv *priv,
+			       bool read, int addr, int len, const u8 *data)
+{
+	const int retry_max = 5;
+	int retry = retry_max;
+	int ret = 0;
+
+	/*
+	 * In case previous command was interrupted we still need to wait it to
+	 * complete before we can issue new commands
+	 */
+	if (priv->cmd_stale) {
+		ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+								msecs_to_jiffies(100));
+		if (ret == -ERESTARTSYS)
+			return -ERESTARTSYS;
+
+		priv->cmd_stale = false;
+		/* if serial protocol broke, bail out */
+		if (priv->cmd_status == STATUS_CRIT)
+			return -EIO;
+	}
+
+	/*
+	 * Try to convince the IMU to cooperate.. as explained in the comments
+	 * at the top of this file, the IMU could also refuse the command (i.e.
+	 * it is not ready yet); retry in this case.
+	 */
+	do {
+		mutex_lock(&priv->lock);
+		priv->expect_response = read ? CMD_READ : CMD_WRITE;
+		reinit_completion(&priv->cmd_complete);
+		mutex_unlock(&priv->lock);
+
+		if (retry != retry_max)
+			trace_cmd_retry(read, addr, retry_max - retry);
+		ret = bno055_ser_do_send_cmd(priv, read, addr, len, data);
+		if (ret)
+			continue;
+
+		ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+								msecs_to_jiffies(100));
+		if (ret == -ERESTARTSYS) {
+			priv->cmd_stale = true;
+			return -ERESTARTSYS;
+		}
+
+		if (!ret)
+			return -ETIMEDOUT;
+
+		if (priv->cmd_status == STATUS_OK)
+			return 0;
+		if (priv->cmd_status == STATUS_CRIT)
+			return -EIO;
+
+		/* loop in case priv->cmd_status == STATUS_FAIL */
+	} while (--retry);
+
+	if (ret < 0)
+		return ret;
+	if (priv->cmd_status == STATUS_FAIL)
+		return -EINVAL;
+	return 0;
+}
+
+static int bno055_ser_write_reg(void *context, const void *_data, size_t count)
+{
+	const u8 *data = _data;
+	struct bno055_ser_priv *priv = context;
+
+	if (count < 2) {
+		dev_err(&priv->serdev->dev, "Invalid write count %zu", count);
+		return -EINVAL;
+	}
+
+	trace_write_reg(data[0], data[1]);
+	return bno055_ser_send_cmd(priv, 0, data[0], count - 1, data + 1);
+}
+
+static int bno055_ser_read_reg(void *context,
+			       const void *_reg, size_t reg_size,
+			       void *val, size_t val_size)
+{
+	int ret;
+	int reg_addr;
+	const u8 *reg = _reg;
+	struct bno055_ser_priv *priv = context;
+
+	if (val_size > 128) {
+		dev_err(&priv->serdev->dev, "Invalid read valsize %zu", val_size);
+		return -EINVAL;
+	}
+
+	reg_addr = *reg;
+	trace_read_reg(reg_addr, val_size);
+	mutex_lock(&priv->lock);
+	priv->expected_data_len = val_size;
+	priv->response_buf = val;
+	mutex_unlock(&priv->lock);
+
+	ret = bno055_ser_send_cmd(priv, 1, reg_addr, val_size, NULL);
+
+	mutex_lock(&priv->lock);
+	priv->response_buf = NULL;
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+/*
+ * Handler for received data; this is called from the receiver callback whenever
+ * it got some packet from the serial bus. The status tells us whether the
+ * packet is valid (i.e. header ok && received payload len consistent wrt the
+ * header). It's now our responsibility to check whether this is what we
+ * expected, of whether we got some unexpected, yet valid, packet.
+ */
+static void bno055_ser_handle_rx(struct bno055_ser_priv *priv, int status)
+{
+	mutex_lock(&priv->lock);
+	switch (priv->expect_response) {
+	case CMD_NONE:
+		dev_warn(&priv->serdev->dev, "received unexpected, yet valid, data from sensor");
+		mutex_unlock(&priv->lock);
+		return;
+
+	case CMD_READ:
+		priv->cmd_status = status;
+		if (status == STATUS_OK &&
+		    priv->rx.databuf_count != priv->expected_data_len) {
+			/*
+			 * If we got here, then the lower layer serial protocol
+			 * seems consistent with itself; if we got an unexpected
+			 * amount of data then signal it as a non critical error
+			 */
+			priv->cmd_status = STATUS_FAIL;
+			dev_warn(&priv->serdev->dev,
+				 "received an unexpected amount of, yet valid, data from sensor");
+		}
+		break;
+
+	case CMD_WRITE:
+		priv->cmd_status = status;
+		break;
+	}
+
+	priv->expect_response = CMD_NONE;
+	mutex_unlock(&priv->lock);
+	complete(&priv->cmd_complete);
+}
+
+/*
+ * Serdev receiver FSM. This tracks the serial communication and parse the
+ * header. It pushes packets to bno055_ser_handle_rx(), eventually communicating
+ * failures (i.e. malformed packets).
+ * Ideally it doesn't know anything about upper layer (i.e. if this is the
+ * packet we were really expecting), but since we copies the payload into the
+ * receiver buffer (that is not valid when i.e. we don't expect data), we
+ * snoop a bit in the upper layer..
+ * Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything
+ * unless we require to AND we don't queue more than one request per time).
+ */
+static int bno055_ser_receive_buf(struct serdev_device *serdev,
+				  const unsigned char *buf, size_t size)
+{
+	int status;
+	struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev);
+	int remaining = size;
+
+	if (size == 0)
+		return 0;
+
+	trace_recv(size, buf);
+	switch (priv->rx.state) {
+	case RX_IDLE:
+		/*
+		 * New packet.
+		 * Check for its 1st byte that identifies the pkt type.
+		 */
+		if (buf[0] != 0xEE && buf[0] != 0xBB) {
+			dev_err(&priv->serdev->dev,
+				"Invalid packet start %x", buf[0]);
+			bno055_ser_handle_rx(priv, STATUS_CRIT);
+			break;
+		}
+		priv->rx.type = buf[0];
+		priv->rx.state = RX_START;
+		remaining--;
+		buf++;
+		priv->rx.databuf_count = 0;
+		fallthrough;
+
+	case RX_START:
+		/*
+		 * Packet RX in progress, we expect either 1-byte len or 1-byte
+		 * status depending by the packet type.
+		 */
+		if (remaining == 0)
+			break;
+
+		if (priv->rx.type == 0xEE) {
+			if (remaining > 1) {
+				dev_err(&priv->serdev->dev, "EE pkt. Extra data received");
+				status = STATUS_CRIT;
+			} else {
+				status = (buf[0] == 1) ? STATUS_OK : STATUS_FAIL;
+			}
+			bno055_ser_handle_rx(priv, status);
+			priv->rx.state = RX_IDLE;
+			break;
+
+		} else {
+			/*priv->rx.type == 0xBB */
+			priv->rx.state = RX_DATA;
+			priv->rx.expected_len = buf[0];
+			remaining--;
+			buf++;
+		}
+		fallthrough;
+
+	case RX_DATA:
+		/* Header parsed; now receiving packet data payload */
+		if (remaining == 0)
+			break;
+
+		if (priv->rx.databuf_count + remaining > priv->rx.expected_len) {
+			/*
+			 * This is an inconsistency in serial protocol, we lost
+			 * sync and we don't know how to handle further data
+			 */
+			dev_err(&priv->serdev->dev, "BB pkt. Extra data received");
+			bno055_ser_handle_rx(priv, STATUS_CRIT);
+			priv->rx.state = RX_IDLE;
+			break;
+		}
+
+		mutex_lock(&priv->lock);
+		/*
+		 * NULL e.g. when read cmd is stale or when no read cmd is
+		 * actually pending.
+		 */
+		if (priv->response_buf &&
+		    /*
+		     * Snoop on the upper layer protocol stuff to make sure not
+		     * to write to an invalid memory. Apart for this, let's the
+		     * upper layer manage any inconsistency wrt expected data
+		     * len (as long as the serial protocol is consistent wrt
+		     * itself (i.e. response header is consistent with received
+		     * response len.
+		     */
+		    (priv->rx.databuf_count + remaining <= priv->expected_data_len))
+			memcpy(priv->response_buf + priv->rx.databuf_count,
+			       buf, remaining);
+		mutex_unlock(&priv->lock);
+
+		priv->rx.databuf_count += remaining;
+
+		/*
+		 * Reached expected len advertised by the IMU for the current
+		 * packet. Pass it to the upper layer (for us it is just valid).
+		 */
+		if (priv->rx.databuf_count == priv->rx.expected_len) {
+			bno055_ser_handle_rx(priv, STATUS_OK);
+			priv->rx.state = RX_IDLE;
+		}
+		break;
+	}
+
+	return size;
+}
+
+static const struct serdev_device_ops bno055_ser_serdev_ops = {
+	.receive_buf = bno055_ser_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static struct regmap_bus bno055_ser_regmap_bus = {
+	.write = bno055_ser_write_reg,
+	.read = bno055_ser_read_reg,
+};
+
+static int bno055_ser_probe(struct serdev_device *serdev)
+{
+	struct bno055_ser_priv *priv;
+	struct regmap *regmap;
+	int ret;
+
+	priv = devm_kzalloc(&serdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	serdev_device_set_drvdata(serdev, priv);
+	priv->serdev = serdev;
+	mutex_init(&priv->lock);
+	init_completion(&priv->cmd_complete);
+
+	serdev_device_set_client_ops(serdev, &bno055_ser_serdev_ops);
+	ret = devm_serdev_device_open(&serdev->dev, serdev);
+	if (ret)
+		return ret;
+
+	if (serdev_device_set_baudrate(serdev, 115200) != 115200) {
+		dev_err(&serdev->dev, "Cannot set required baud rate");
+		return -EIO;
+	}
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret) {
+		dev_err(&serdev->dev, "Cannot set required parity setting");
+		return ret;
+	}
+	serdev_device_set_flow_control(serdev, false);
+
+	regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
+				  priv, &bno055_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&serdev->dev, PTR_ERR(regmap),
+				     "Unable to init register map");
+
+	return bno055_probe(&serdev->dev, regmap,
+			    BNO055_SER_XFER_BURST_BREAK_THRESHOLD, false);
+}
+
+static const struct of_device_id bno055_ser_of_match[] = {
+	{ .compatible = "bosch,bno055" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bno055_ser_of_match);
+
+static struct serdev_device_driver bno055_ser_driver = {
+	.driver = {
+		.name = "bno055-ser",
+		.of_match_table = bno055_ser_of_match,
+	},
+	.probe = bno055_ser_probe,
+};
+module_serdev_device_driver(bno055_ser_driver);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 serdev interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.c b/drivers/iio/imu/bno055/bno055_ser_trace.c
new file mode 100644
index 0000000000..ab564186d1
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * bno055_ser Trace Support
+ * Copyright (C) 2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ *
+ * Based on:
+ *   Device core Trace Support
+ *   Copyright (C) 2021, Intel Corporation
+ */
+
+#define CREATE_TRACE_POINTS
+#include "bno055_ser_trace.h"
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.h b/drivers/iio/imu/bno055/bno055_ser_trace.h
new file mode 100644
index 0000000000..7d9eae166e
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#if !defined(__BNO055_SERDEV_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ)
+#define __BNO055_SERDEV_TRACE_H__
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM bno055_ser
+
+TRACE_EVENT(send_chunk,
+	    TP_PROTO(int len, const u8 *data),
+	    TP_ARGS(len, data),
+	    TP_STRUCT__entry(
+		    __field(int, len)
+		    __dynamic_array(u8, chunk, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->len = len;
+		    memcpy(__get_dynamic_array(chunk),
+			   data, __entry->len);
+	    ),
+	    TP_printk("len: %d, data: = %*ph",
+		      __entry->len, __entry->len, __get_dynamic_array(chunk)
+	    )
+);
+
+TRACE_EVENT(cmd_retry,
+	    TP_PROTO(bool read, int addr, int retry),
+	    TP_ARGS(read, addr, retry),
+	    TP_STRUCT__entry(
+		    __field(bool, read)
+		    __field(int, addr)
+		    __field(int, retry)
+	    ),
+	    TP_fast_assign(
+		    __entry->read = read;
+		    __entry->addr = addr;
+		    __entry->retry = retry;
+	    ),
+	    TP_printk("%s addr 0x%x retry #%d",
+		      __entry->read ? "read" : "write",
+		      __entry->addr, __entry->retry
+	    )
+);
+
+TRACE_EVENT(write_reg,
+	    TP_PROTO(u8 addr, u8 value),
+	    TP_ARGS(addr, value),
+	    TP_STRUCT__entry(
+		    __field(u8, addr)
+		    __field(u8, value)
+	    ),
+	    TP_fast_assign(
+		    __entry->addr = addr;
+		    __entry->value = value;
+	    ),
+	    TP_printk("reg 0x%x = 0x%x",
+		      __entry->addr, __entry->value
+	    )
+);
+
+TRACE_EVENT(read_reg,
+	    TP_PROTO(int addr, size_t len),
+	    TP_ARGS(addr, len),
+	    TP_STRUCT__entry(
+		    __field(int, addr)
+		    __field(size_t, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->addr = addr;
+		    __entry->len = len;
+	    ),
+	    TP_printk("reg 0x%x (len %zu)",
+		      __entry->addr, __entry->len
+	    )
+);
+
+TRACE_EVENT(recv,
+	    TP_PROTO(size_t len, const unsigned char *buf),
+	    TP_ARGS(len, buf),
+	    TP_STRUCT__entry(
+		    __field(size_t, len)
+		    __dynamic_array(unsigned char, buf, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->len = len;
+		    memcpy(__get_dynamic_array(buf),
+			   buf, __entry->len);
+	    ),
+	    TP_printk("len: %zu, data: = %*ph",
+		      __entry->len, (int)__entry->len, __get_dynamic_array(buf)
+	    )
+);
+
+#endif /* __BNO055_SERDEV_TRACE_H__ || TRACE_HEADER_MULTI_READ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE bno055_ser_trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/iio/imu/fxos8700.h b/drivers/iio/imu/fxos8700.h
new file mode 100644
index 0000000000..6dfb8d7099
--- /dev/null
+++ b/drivers/iio/imu/fxos8700.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef FXOS8700_H_
+#define FXOS8700_H_
+
+extern const struct regmap_config fxos8700_regmap_config;
+
+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
+			const char *name, bool use_spi);
+
+#endif  /* FXOS8700_H_ */
diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c
new file mode 100644
index 0000000000..6d189c4b9f
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_core.c
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU (accelerometer plus magnetometer)
+ *
+ * IIO core driver for FXOS8700, with support for I2C/SPI busses
+ *
+ * TODO: Buffer, trigger, and IRQ support
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "fxos8700.h"
+
+/* Register Definitions */
+#define FXOS8700_STATUS             0x00
+#define FXOS8700_OUT_X_MSB          0x01
+#define FXOS8700_OUT_X_LSB          0x02
+#define FXOS8700_OUT_Y_MSB          0x03
+#define FXOS8700_OUT_Y_LSB          0x04
+#define FXOS8700_OUT_Z_MSB          0x05
+#define FXOS8700_OUT_Z_LSB          0x06
+#define FXOS8700_F_SETUP            0x09
+#define FXOS8700_TRIG_CFG           0x0a
+#define FXOS8700_SYSMOD             0x0b
+#define FXOS8700_INT_SOURCE         0x0c
+#define FXOS8700_WHO_AM_I           0x0d
+#define FXOS8700_XYZ_DATA_CFG       0x0e
+#define FXOS8700_HP_FILTER_CUTOFF   0x0f
+#define FXOS8700_PL_STATUS          0x10
+#define FXOS8700_PL_CFG             0x11
+#define FXOS8700_PL_COUNT           0x12
+#define FXOS8700_PL_BF_ZCOMP        0x13
+#define FXOS8700_PL_THS_REG         0x14
+#define FXOS8700_A_FFMT_CFG         0x15
+#define FXOS8700_A_FFMT_SRC         0x16
+#define FXOS8700_A_FFMT_THS         0x17
+#define FXOS8700_A_FFMT_COUNT       0x18
+#define FXOS8700_TRANSIENT_CFG      0x1d
+#define FXOS8700_TRANSIENT_SRC      0x1e
+#define FXOS8700_TRANSIENT_THS      0x1f
+#define FXOS8700_TRANSIENT_COUNT    0x20
+#define FXOS8700_PULSE_CFG          0x21
+#define FXOS8700_PULSE_SRC          0x22
+#define FXOS8700_PULSE_THSX         0x23
+#define FXOS8700_PULSE_THSY         0x24
+#define FXOS8700_PULSE_THSZ         0x25
+#define FXOS8700_PULSE_TMLT         0x26
+#define FXOS8700_PULSE_LTCY         0x27
+#define FXOS8700_PULSE_WIND         0x28
+#define FXOS8700_ASLP_COUNT         0x29
+#define FXOS8700_CTRL_REG1          0x2a
+#define FXOS8700_CTRL_REG2          0x2b
+#define FXOS8700_CTRL_REG3          0x2c
+#define FXOS8700_CTRL_REG4          0x2d
+#define FXOS8700_CTRL_REG5          0x2e
+#define FXOS8700_OFF_X              0x2f
+#define FXOS8700_OFF_Y              0x30
+#define FXOS8700_OFF_Z              0x31
+#define FXOS8700_M_DR_STATUS        0x32
+#define FXOS8700_M_OUT_X_MSB        0x33
+#define FXOS8700_M_OUT_X_LSB        0x34
+#define FXOS8700_M_OUT_Y_MSB        0x35
+#define FXOS8700_M_OUT_Y_LSB        0x36
+#define FXOS8700_M_OUT_Z_MSB        0x37
+#define FXOS8700_M_OUT_Z_LSB        0x38
+#define FXOS8700_CMP_X_MSB          0x39
+#define FXOS8700_CMP_X_LSB          0x3a
+#define FXOS8700_CMP_Y_MSB          0x3b
+#define FXOS8700_CMP_Y_LSB          0x3c
+#define FXOS8700_CMP_Z_MSB          0x3d
+#define FXOS8700_CMP_Z_LSB          0x3e
+#define FXOS8700_M_OFF_X_MSB        0x3f
+#define FXOS8700_M_OFF_X_LSB        0x40
+#define FXOS8700_M_OFF_Y_MSB        0x41
+#define FXOS8700_M_OFF_Y_LSB        0x42
+#define FXOS8700_M_OFF_Z_MSB        0x43
+#define FXOS8700_M_OFF_Z_LSB        0x44
+#define FXOS8700_MAX_X_MSB          0x45
+#define FXOS8700_MAX_X_LSB          0x46
+#define FXOS8700_MAX_Y_MSB          0x47
+#define FXOS8700_MAX_Y_LSB          0x48
+#define FXOS8700_MAX_Z_MSB          0x49
+#define FXOS8700_MAX_Z_LSB          0x4a
+#define FXOS8700_MIN_X_MSB          0x4b
+#define FXOS8700_MIN_X_LSB          0x4c
+#define FXOS8700_MIN_Y_MSB          0x4d
+#define FXOS8700_MIN_Y_LSB          0x4e
+#define FXOS8700_MIN_Z_MSB          0x4f
+#define FXOS8700_MIN_Z_LSB          0x50
+#define FXOS8700_TEMP               0x51
+#define FXOS8700_M_THS_CFG          0x52
+#define FXOS8700_M_THS_SRC          0x53
+#define FXOS8700_M_THS_X_MSB        0x54
+#define FXOS8700_M_THS_X_LSB        0x55
+#define FXOS8700_M_THS_Y_MSB        0x56
+#define FXOS8700_M_THS_Y_LSB        0x57
+#define FXOS8700_M_THS_Z_MSB        0x58
+#define FXOS8700_M_THS_Z_LSB        0x59
+#define FXOS8700_M_THS_COUNT        0x5a
+#define FXOS8700_M_CTRL_REG1        0x5b
+#define FXOS8700_M_CTRL_REG2        0x5c
+#define FXOS8700_M_CTRL_REG3        0x5d
+#define FXOS8700_M_INT_SRC          0x5e
+#define FXOS8700_A_VECM_CFG         0x5f
+#define FXOS8700_A_VECM_THS_MSB     0x60
+#define FXOS8700_A_VECM_THS_LSB     0x61
+#define FXOS8700_A_VECM_CNT         0x62
+#define FXOS8700_A_VECM_INITX_MSB   0x63
+#define FXOS8700_A_VECM_INITX_LSB   0x64
+#define FXOS8700_A_VECM_INITY_MSB   0x65
+#define FXOS8700_A_VECM_INITY_LSB   0x66
+#define FXOS8700_A_VECM_INITZ_MSB   0x67
+#define FXOS8700_A_VECM_INITZ_LSB   0x68
+#define FXOS8700_M_VECM_CFG         0x69
+#define FXOS8700_M_VECM_THS_MSB     0x6a
+#define FXOS8700_M_VECM_THS_LSB     0x6b
+#define FXOS8700_M_VECM_CNT         0x6c
+#define FXOS8700_M_VECM_INITX_MSB   0x6d
+#define FXOS8700_M_VECM_INITX_LSB   0x6e
+#define FXOS8700_M_VECM_INITY_MSB   0x6f
+#define FXOS8700_M_VECM_INITY_LSB   0x70
+#define FXOS8700_M_VECM_INITZ_MSB   0x71
+#define FXOS8700_M_VECM_INITZ_LSB   0x72
+#define FXOS8700_A_FFMT_THS_X_MSB   0x73
+#define FXOS8700_A_FFMT_THS_X_LSB   0x74
+#define FXOS8700_A_FFMT_THS_Y_MSB   0x75
+#define FXOS8700_A_FFMT_THS_Y_LSB   0x76
+#define FXOS8700_A_FFMT_THS_Z_MSB   0x77
+#define FXOS8700_A_FFMT_THS_Z_LSB   0x78
+#define FXOS8700_A_TRAN_INIT_MSB    0x79
+#define FXOS8700_A_TRAN_INIT_LSB_X  0x7a
+#define FXOS8700_A_TRAN_INIT_LSB_Y  0x7b
+#define FXOS8700_A_TRAN_INIT_LSB_Z  0x7d
+#define FXOS8700_TM_NVM_LOCK        0x7e
+#define FXOS8700_NVM_DATA0_35       0x80
+#define FXOS8700_NVM_DATA_BNK3      0xa4
+#define FXOS8700_NVM_DATA_BNK2      0xa5
+#define FXOS8700_NVM_DATA_BNK1      0xa6
+#define FXOS8700_NVM_DATA_BNK0      0xa7
+
+/* Bit definitions for FXOS8700_CTRL_REG1 */
+#define FXOS8700_CTRL_ODR_MAX       0x00
+#define FXOS8700_CTRL_ODR_MSK       GENMASK(5, 3)
+
+/* Bit definitions for FXOS8700_M_CTRL_REG1 */
+#define FXOS8700_HMS_MASK           GENMASK(1, 0)
+#define FXOS8700_OS_MASK            GENMASK(4, 2)
+
+/* Bit definitions for FXOS8700_M_CTRL_REG2 */
+#define FXOS8700_MAXMIN_RST         BIT(2)
+#define FXOS8700_MAXMIN_DIS_THS     BIT(3)
+#define FXOS8700_MAXMIN_DIS         BIT(4)
+
+#define FXOS8700_ACTIVE             0x01
+#define FXOS8700_ACTIVE_MIN_USLEEP  4000 /* from table 6 in datasheet */
+
+#define FXOS8700_DEVICE_ID          0xC7
+#define FXOS8700_PRE_DEVICE_ID      0xC4
+#define FXOS8700_DATA_BUF_SIZE      3
+
+struct fxos8700_data {
+	struct regmap *regmap;
+	struct iio_trigger *trig;
+	__be16 buf[FXOS8700_DATA_BUF_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+/* Regmap info */
+static const struct regmap_range read_range[] = {
+	{
+		.range_min = FXOS8700_STATUS,
+		.range_max = FXOS8700_A_FFMT_COUNT,
+	}, {
+		.range_min = FXOS8700_TRANSIENT_CFG,
+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
+	},
+};
+
+static const struct regmap_range write_range[] = {
+	{
+		.range_min = FXOS8700_F_SETUP,
+		.range_max = FXOS8700_TRIG_CFG,
+	}, {
+		.range_min = FXOS8700_XYZ_DATA_CFG,
+		.range_max = FXOS8700_HP_FILTER_CUTOFF,
+	}, {
+		.range_min = FXOS8700_PL_CFG,
+		.range_max = FXOS8700_A_FFMT_CFG,
+	}, {
+		.range_min = FXOS8700_A_FFMT_THS,
+		.range_max = FXOS8700_TRANSIENT_CFG,
+	}, {
+		.range_min = FXOS8700_TRANSIENT_THS,
+		.range_max = FXOS8700_PULSE_CFG,
+	}, {
+		.range_min = FXOS8700_PULSE_THSX,
+		.range_max = FXOS8700_OFF_Z,
+	}, {
+		.range_min = FXOS8700_M_OFF_X_MSB,
+		.range_max = FXOS8700_M_OFF_Z_LSB,
+	}, {
+		.range_min = FXOS8700_M_THS_CFG,
+		.range_max = FXOS8700_M_THS_CFG,
+	}, {
+		.range_min = FXOS8700_M_THS_X_MSB,
+		.range_max = FXOS8700_M_CTRL_REG3,
+	}, {
+		.range_min = FXOS8700_A_VECM_CFG,
+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
+	},
+};
+
+static const struct regmap_access_table driver_read_table = {
+	.yes_ranges =   read_range,
+	.n_yes_ranges = ARRAY_SIZE(read_range),
+};
+
+static const struct regmap_access_table driver_write_table = {
+	.yes_ranges =   write_range,
+	.n_yes_ranges = ARRAY_SIZE(write_range),
+};
+
+const struct regmap_config fxos8700_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FXOS8700_NVM_DATA_BNK0,
+	.rd_table = &driver_read_table,
+	.wr_table = &driver_write_table,
+};
+EXPORT_SYMBOL(fxos8700_regmap_config);
+
+#define FXOS8700_CHANNEL(_type, _axis) {			\
+	.type = _type,						\
+	.modified = 1,						\
+	.channel2 = IIO_MOD_##_axis,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+}
+
+enum fxos8700_accel_scale_bits {
+	MODE_2G = 0,
+	MODE_4G,
+	MODE_8G,
+};
+
+/* scan indexes follow DATA register order */
+enum fxos8700_scan_axis {
+	FXOS8700_SCAN_ACCEL_X = 0,
+	FXOS8700_SCAN_ACCEL_Y,
+	FXOS8700_SCAN_ACCEL_Z,
+	FXOS8700_SCAN_MAGN_X,
+	FXOS8700_SCAN_MAGN_Y,
+	FXOS8700_SCAN_MAGN_Z,
+	FXOS8700_SCAN_RHALL,
+	FXOS8700_SCAN_TIMESTAMP,
+};
+
+enum fxos8700_sensor {
+	FXOS8700_ACCEL	= 0,
+	FXOS8700_MAGN,
+	FXOS8700_NUM_SENSORS /* must be last */
+};
+
+enum fxos8700_int_pin {
+	FXOS8700_PIN_INT1,
+	FXOS8700_PIN_INT2
+};
+
+struct fxos8700_scale {
+	u8 bits;
+	int uscale;
+};
+
+struct fxos8700_odr {
+	u8 bits;
+	int odr;
+	int uodr;
+};
+
+static const struct fxos8700_scale fxos8700_accel_scale[] = {
+	{ MODE_2G, 244},
+	{ MODE_4G, 488},
+	{ MODE_8G, 976},
+};
+
+/*
+ * Accellerometer and magnetometer have the same ODR options, set in the
+ * CTRL_REG1 register. ODR is halved when using both sensors at once in
+ * hybrid mode.
+ */
+static const struct fxos8700_odr fxos8700_odr[] = {
+	{0x00, 800, 0},
+	{0x01, 400, 0},
+	{0x02, 200, 0},
+	{0x03, 100, 0},
+	{0x04, 50, 0},
+	{0x05, 12, 500000},
+	{0x06, 6, 250000},
+	{0x07, 1, 562500},
+};
+
+static const struct iio_chan_spec fxos8700_channels[] = {
+	FXOS8700_CHANNEL(IIO_ACCEL, X),
+	FXOS8700_CHANNEL(IIO_ACCEL, Y),
+	FXOS8700_CHANNEL(IIO_ACCEL, Z),
+	FXOS8700_CHANNEL(IIO_MAGN, X),
+	FXOS8700_CHANNEL(IIO_MAGN, Y),
+	FXOS8700_CHANNEL(IIO_MAGN, Z),
+	IIO_CHAN_SOFT_TIMESTAMP(FXOS8700_SCAN_TIMESTAMP),
+};
+
+static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type)
+{
+	switch (iio_type) {
+	case IIO_ACCEL:
+		return FXOS8700_ACCEL;
+	case IIO_MAGN:
+		return FXOS8700_MAGN;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int fxos8700_set_active_mode(struct fxos8700_data *data,
+				    enum fxos8700_sensor t, bool mode)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, mode);
+	if (ret)
+		return ret;
+
+	usleep_range(FXOS8700_ACTIVE_MIN_USLEEP,
+		     FXOS8700_ACTIVE_MIN_USLEEP + 1000);
+
+	return 0;
+}
+
+static int fxos8700_set_scale(struct fxos8700_data *data,
+			      enum fxos8700_sensor t, int uscale)
+{
+	int i, ret, val;
+	bool active_mode;
+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (t == FXOS8700_MAGN) {
+		dev_err(dev, "Magnetometer scale is locked at 0.001Gs\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * When device is in active mode, it failed to set an ACCEL
+	 * full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG.
+	 * This is not align with the datasheet, but it is a fxos8700
+	 * chip behavier. Set the device in standby mode before setting
+	 * an ACCEL full-scale range.
+	 */
+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
+	if (ret)
+		return ret;
+
+	active_mode = val & FXOS8700_ACTIVE;
+	if (active_mode) {
+		ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
+				   val & ~FXOS8700_ACTIVE);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < scale_num; i++)
+		if (fxos8700_accel_scale[i].uscale == uscale)
+			break;
+
+	if (i == scale_num)
+		return -EINVAL;
+
+	ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG,
+			    fxos8700_accel_scale[i].bits);
+	if (ret)
+		return ret;
+	return regmap_write(data->regmap, FXOS8700_CTRL_REG1,
+				  active_mode);
+}
+
+static int fxos8700_get_scale(struct fxos8700_data *data,
+			      enum fxos8700_sensor t, int *uscale)
+{
+	int i, ret, val;
+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
+
+	if (t == FXOS8700_MAGN) {
+		*uscale = 1000; /* Magnetometer is locked at 0.001Gs */
+		return 0;
+	}
+
+	ret = regmap_read(data->regmap, FXOS8700_XYZ_DATA_CFG, &val);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < scale_num; i++) {
+		if (fxos8700_accel_scale[i].bits == (val & 0x3)) {
+			*uscale = fxos8700_accel_scale[i].uscale;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int fxos8700_get_data(struct fxos8700_data *data, int chan_type,
+			     int axis, int *val)
+{
+	u8 base, reg;
+	s16 tmp;
+	int ret;
+
+	/*
+	 * Different register base addresses varies with channel types.
+	 * This bug hasn't been noticed before because using an enum is
+	 * really hard to read. Use an a switch statement to take over that.
+	 */
+	switch (chan_type) {
+	case IIO_ACCEL:
+		base = FXOS8700_OUT_X_MSB;
+		break;
+	case IIO_MAGN:
+		base = FXOS8700_M_OUT_X_MSB;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Block read 6 bytes of device output registers to avoid data loss */
+	ret = regmap_bulk_read(data->regmap, base, data->buf,
+			       sizeof(data->buf));
+	if (ret)
+		return ret;
+
+	/* Convert axis to buffer index */
+	reg = axis - IIO_MOD_X;
+
+	/*
+	 * Convert to native endianness. The accel data and magn data
+	 * are signed, so a forced type conversion is needed.
+	 */
+	tmp = be16_to_cpu(data->buf[reg]);
+
+	/*
+	 * ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
+	 * 14-bit left-justified sample data and MAGN output data registers
+	 * contain the X-axis, Y-axis, and Z-axis 16-bit sample data. Apply
+	 * a signed 2 bits right shift to the readback raw data from ACCEL
+	 * output data register and keep that from MAGN sensor as the origin.
+	 * Value should be extended to 32 bit.
+	 */
+	switch (chan_type) {
+	case IIO_ACCEL:
+		tmp = tmp >> 2;
+		break;
+	case IIO_MAGN:
+		/* Nothing to do */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Convert to native endianness */
+	*val = sign_extend32(tmp, 15);
+
+	return 0;
+}
+
+static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
+			    int odr, int uodr)
+{
+	int i, ret, val;
+	bool active_mode;
+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
+
+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
+	if (ret)
+		return ret;
+
+	active_mode = val & FXOS8700_ACTIVE;
+
+	if (active_mode) {
+		/*
+		 * The device must be in standby mode to change any of the
+		 * other fields within CTRL_REG1
+		 */
+		ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
+				   val & ~FXOS8700_ACTIVE);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < odr_num; i++)
+		if (fxos8700_odr[i].odr == odr && fxos8700_odr[i].uodr == uodr)
+			break;
+
+	if (i >= odr_num)
+		return -EINVAL;
+
+	val &= ~FXOS8700_CTRL_ODR_MSK;
+	val |= FIELD_PREP(FXOS8700_CTRL_ODR_MSK, fxos8700_odr[i].bits) | FXOS8700_ACTIVE;
+	return regmap_write(data->regmap, FXOS8700_CTRL_REG1, val);
+}
+
+static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
+			    int *odr, int *uodr)
+{
+	int i, val, ret;
+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
+
+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
+	if (ret)
+		return ret;
+
+	val = FIELD_GET(FXOS8700_CTRL_ODR_MSK, val);
+
+	for (i = 0; i < odr_num; i++)
+		if (val == fxos8700_odr[i].bits)
+			break;
+
+	if (i >= odr_num)
+		return -EINVAL;
+
+	*odr = fxos8700_odr[i].odr;
+	*uodr = fxos8700_odr[i].uodr;
+
+	return 0;
+}
+
+static int fxos8700_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	int ret;
+	struct fxos8700_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = fxos8700_get_data(data, chan->type, chan->channel2, val);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		ret = fxos8700_get_scale(data, fxos8700_to_sensor(chan->type),
+					 val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = fxos8700_get_odr(data, fxos8700_to_sensor(chan->type),
+				       val, val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int fxos8700_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct fxos8700_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return fxos8700_set_scale(data, fxos8700_to_sensor(chan->type),
+					  val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return fxos8700_set_odr(data, fxos8700_to_sensor(chan->type),
+					val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(in_accel_sampling_frequency_available,
+		      "1.5625 6.25 12.5 50 100 200 400 800");
+static IIO_CONST_ATTR(in_magn_sampling_frequency_available,
+		      "1.5625 6.25 12.5 50 100 200 400 800");
+static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976");
+static IIO_CONST_ATTR(in_magn_scale_available, "0.001000");
+
+static struct attribute *fxos8700_attrs[] = {
+	&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_magn_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_in_magn_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fxos8700_attrs_group = {
+	.attrs = fxos8700_attrs,
+};
+
+static const struct iio_info fxos8700_info = {
+	.read_raw = fxos8700_read_raw,
+	.write_raw = fxos8700_write_raw,
+	.attrs = &fxos8700_attrs_group,
+};
+
+static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi)
+{
+	int ret;
+	unsigned int val;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	ret = regmap_read(data->regmap, FXOS8700_WHO_AM_I, &val);
+	if (ret) {
+		dev_err(dev, "Error reading chip id\n");
+		return ret;
+	}
+	if (val != FXOS8700_DEVICE_ID && val != FXOS8700_PRE_DEVICE_ID) {
+		dev_err(dev, "Wrong chip id, got %x expected %x or %x\n",
+			val, FXOS8700_DEVICE_ID, FXOS8700_PRE_DEVICE_ID);
+		return -ENODEV;
+	}
+
+	ret = fxos8700_set_active_mode(data, FXOS8700_ACCEL, true);
+	if (ret)
+		return ret;
+
+	ret = fxos8700_set_active_mode(data, FXOS8700_MAGN, true);
+	if (ret)
+		return ret;
+
+	/*
+	 * The device must be in standby mode to change any of the other fields
+	 * within CTRL_REG1
+	 */
+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, 0x00);
+	if (ret)
+		return ret;
+
+	/* Set max oversample ratio (OSR) and both devices active */
+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG1,
+			   FXOS8700_HMS_MASK | FXOS8700_OS_MASK);
+	if (ret)
+		return ret;
+
+	/* Disable and rst min/max measurements & threshold */
+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG2,
+			   FXOS8700_MAXMIN_RST | FXOS8700_MAXMIN_DIS_THS |
+			   FXOS8700_MAXMIN_DIS);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set max full-scale range (+/-8G) for ACCEL sensor in chip
+	 * initialization then activate the device.
+	 */
+	ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G);
+	if (ret)
+		return ret;
+
+	/* Max ODR (800Hz individual or 400Hz hybrid), active mode */
+	return regmap_update_bits(data->regmap, FXOS8700_CTRL_REG1,
+				FXOS8700_CTRL_ODR_MSK | FXOS8700_ACTIVE,
+				FIELD_PREP(FXOS8700_CTRL_ODR_MSK, FXOS8700_CTRL_ODR_MAX) |
+				FXOS8700_ACTIVE);
+}
+
+static void fxos8700_chip_uninit(void *data)
+{
+	struct fxos8700_data *fxos8700_data = data;
+
+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_ACCEL, false);
+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_MAGN, false);
+}
+
+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
+			const char *name, bool use_spi)
+{
+	struct iio_dev *indio_dev;
+	struct fxos8700_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->regmap = regmap;
+
+	ret = fxos8700_chip_init(data, use_spi);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, fxos8700_chip_uninit, data);
+	if (ret)
+		return ret;
+
+	indio_dev->channels = fxos8700_channels;
+	indio_dev->num_channels = ARRAY_SIZE(fxos8700_channels);
+	indio_dev->name = name ? name : "fxos8700";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &fxos8700_info;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(fxos8700_core_probe);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 6-Axis Acc and Mag Combo Sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/fxos8700_i2c.c b/drivers/iio/imu/fxos8700_i2c.c
new file mode 100644
index 0000000000..2ace306d0f
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_i2c.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU, I2C bits
+ *
+ * 7-bit I2C slave address determined by SA1 and SA0 logic level
+ * inputs represented in the following table:
+ *      SA1  |  SA0  |  Slave Address
+ *      0    |  0    |  0x1E
+ *      0    |  1    |  0x1D
+ *      1    |  0    |  0x1C
+ *      1    |  1    |  0x1F
+ */
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+
+#include "fxos8700.h"
+
+static int fxos8700_i2c_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &fxos8700_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return fxos8700_core_probe(&client->dev, regmap, name, false);
+}
+
+static const struct i2c_device_id fxos8700_i2c_id[] = {
+	{"fxos8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fxos8700_i2c_id);
+
+static const struct acpi_device_id fxos8700_acpi_match[] = {
+	{"FXOS8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
+
+static const struct of_device_id fxos8700_of_match[] = {
+	{ .compatible = "nxp,fxos8700" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
+
+static struct i2c_driver fxos8700_i2c_driver = {
+	.driver = {
+		.name                   = "fxos8700_i2c",
+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
+		.of_match_table         = fxos8700_of_match,
+	},
+	.probe          = fxos8700_i2c_probe,
+	.id_table       = fxos8700_i2c_id,
+};
+module_i2c_driver(fxos8700_i2c_driver);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/fxos8700_spi.c b/drivers/iio/imu/fxos8700_spi.c
new file mode 100644
index 0000000000..27e694cce1
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_spi.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU, SPI bits
+ */
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "fxos8700.h"
+
+static int fxos8700_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	regmap = devm_regmap_init_spi(spi, &fxos8700_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return fxos8700_core_probe(&spi->dev, regmap, id->name, true);
+}
+
+static const struct spi_device_id fxos8700_spi_id[] = {
+	{"fxos8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, fxos8700_spi_id);
+
+static const struct acpi_device_id fxos8700_acpi_match[] = {
+	{"FXOS8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
+
+static const struct of_device_id fxos8700_of_match[] = {
+	{ .compatible = "nxp,fxos8700" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
+
+static struct spi_driver fxos8700_spi_driver = {
+	.probe          = fxos8700_spi_probe,
+	.id_table       = fxos8700_spi_id,
+	.driver = {
+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
+		.of_match_table         = fxos8700_of_match,
+		.name                   = "fxos8700_spi",
+	},
+};
+module_spi_driver(fxos8700_spi_driver);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/inv_icm42600/Kconfig b/drivers/iio/imu/inv_icm42600/Kconfig
new file mode 100644
index 0000000000..f56b0816cc
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config INV_ICM42600
+	tristate
+	select IIO_BUFFER
+	select IIO_INV_SENSORS_TIMESTAMP
+
+config INV_ICM42600_I2C
+	tristate "InvenSense ICM-426xx I2C driver"
+	depends on I2C
+	select INV_ICM42600
+	select REGMAP_I2C
+	help
+	  This driver supports the InvenSense ICM-426xx motion tracking
+	  devices over I2C.
+
+	  This driver can be built as a module. The module will be called
+	  inv-icm42600-i2c.
+
+config INV_ICM42600_SPI
+	tristate "InvenSense ICM-426xx SPI driver"
+	depends on SPI_MASTER
+	select INV_ICM42600
+	select REGMAP_SPI
+	help
+	  This driver supports the InvenSense ICM-426xx motion tracking
+	  devices over SPI.
+
+	  This driver can be built as a module. The module will be called
+	  inv-icm42600-spi.
diff --git a/drivers/iio/imu/inv_icm42600/Makefile b/drivers/iio/imu/inv_icm42600/Makefile
new file mode 100644
index 0000000000..0f49f6df36
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+obj-$(CONFIG_INV_ICM42600) += inv-icm42600.o
+inv-icm42600-y += inv_icm42600_core.o
+inv-icm42600-y += inv_icm42600_gyro.o
+inv-icm42600-y += inv_icm42600_accel.o
+inv-icm42600-y += inv_icm42600_temp.o
+inv-icm42600-y += inv_icm42600_buffer.o
+
+obj-$(CONFIG_INV_ICM42600_I2C) += inv-icm42600-i2c.o
+inv-icm42600-i2c-y += inv_icm42600_i2c.o
+
+obj-$(CONFIG_INV_ICM42600_SPI) += inv-icm42600-spi.o
+inv-icm42600-spi-y += inv_icm42600_spi.o
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
new file mode 100644
index 0000000000..0e290c807b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#ifndef INV_ICM42600_H_
+#define INV_ICM42600_H_
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm.h>
+#include <linux/iio/iio.h>
+
+#include "inv_icm42600_buffer.h"
+
+enum inv_icm42600_chip {
+	INV_CHIP_INVALID,
+	INV_CHIP_ICM42600,
+	INV_CHIP_ICM42602,
+	INV_CHIP_ICM42605,
+	INV_CHIP_ICM42622,
+	INV_CHIP_ICM42631,
+	INV_CHIP_NB,
+};
+
+/* serial bus slew rates */
+enum inv_icm42600_slew_rate {
+	INV_ICM42600_SLEW_RATE_20_60NS,
+	INV_ICM42600_SLEW_RATE_12_36NS,
+	INV_ICM42600_SLEW_RATE_6_18NS,
+	INV_ICM42600_SLEW_RATE_4_12NS,
+	INV_ICM42600_SLEW_RATE_2_6NS,
+	INV_ICM42600_SLEW_RATE_INF_2NS,
+};
+
+enum inv_icm42600_sensor_mode {
+	INV_ICM42600_SENSOR_MODE_OFF,
+	INV_ICM42600_SENSOR_MODE_STANDBY,
+	INV_ICM42600_SENSOR_MODE_LOW_POWER,
+	INV_ICM42600_SENSOR_MODE_LOW_NOISE,
+	INV_ICM42600_SENSOR_MODE_NB,
+};
+
+/* gyroscope fullscale values */
+enum inv_icm42600_gyro_fs {
+	INV_ICM42600_GYRO_FS_2000DPS,
+	INV_ICM42600_GYRO_FS_1000DPS,
+	INV_ICM42600_GYRO_FS_500DPS,
+	INV_ICM42600_GYRO_FS_250DPS,
+	INV_ICM42600_GYRO_FS_125DPS,
+	INV_ICM42600_GYRO_FS_62_5DPS,
+	INV_ICM42600_GYRO_FS_31_25DPS,
+	INV_ICM42600_GYRO_FS_15_625DPS,
+	INV_ICM42600_GYRO_FS_NB,
+};
+
+/* accelerometer fullscale values */
+enum inv_icm42600_accel_fs {
+	INV_ICM42600_ACCEL_FS_16G,
+	INV_ICM42600_ACCEL_FS_8G,
+	INV_ICM42600_ACCEL_FS_4G,
+	INV_ICM42600_ACCEL_FS_2G,
+	INV_ICM42600_ACCEL_FS_NB,
+};
+
+/* ODR suffixed by LN or LP are Low-Noise or Low-Power mode only */
+enum inv_icm42600_odr {
+	INV_ICM42600_ODR_8KHZ_LN = 3,
+	INV_ICM42600_ODR_4KHZ_LN,
+	INV_ICM42600_ODR_2KHZ_LN,
+	INV_ICM42600_ODR_1KHZ_LN,
+	INV_ICM42600_ODR_200HZ,
+	INV_ICM42600_ODR_100HZ,
+	INV_ICM42600_ODR_50HZ,
+	INV_ICM42600_ODR_25HZ,
+	INV_ICM42600_ODR_12_5HZ,
+	INV_ICM42600_ODR_6_25HZ_LP,
+	INV_ICM42600_ODR_3_125HZ_LP,
+	INV_ICM42600_ODR_1_5625HZ_LP,
+	INV_ICM42600_ODR_500HZ,
+	INV_ICM42600_ODR_NB,
+};
+
+enum inv_icm42600_filter {
+	/* Low-Noise mode sensor data filter (3rd order filter by default) */
+	INV_ICM42600_FILTER_BW_ODR_DIV_2,
+
+	/* Low-Power mode sensor data filter (averaging) */
+	INV_ICM42600_FILTER_AVG_1X = 1,
+	INV_ICM42600_FILTER_AVG_16X = 6,
+};
+
+struct inv_icm42600_sensor_conf {
+	int mode;
+	int fs;
+	int odr;
+	int filter;
+};
+#define INV_ICM42600_SENSOR_CONF_INIT		{-1, -1, -1, -1}
+
+struct inv_icm42600_conf {
+	struct inv_icm42600_sensor_conf gyro;
+	struct inv_icm42600_sensor_conf accel;
+	bool temp_en;
+};
+
+struct inv_icm42600_suspended {
+	enum inv_icm42600_sensor_mode gyro;
+	enum inv_icm42600_sensor_mode accel;
+	bool temp;
+};
+
+/**
+ *  struct inv_icm42600_state - driver state variables
+ *  @lock:		lock for serializing multiple registers access.
+ *  @chip:		chip identifier.
+ *  @name:		chip name.
+ *  @map:		regmap pointer.
+ *  @vdd_supply:	VDD voltage regulator for the chip.
+ *  @vddio_supply:	I/O voltage regulator for the chip.
+ *  @orientation:	sensor chip orientation relative to main hardware.
+ *  @conf:		chip sensors configurations.
+ *  @suspended:		suspended sensors configuration.
+ *  @indio_gyro:	gyroscope IIO device.
+ *  @indio_accel:	accelerometer IIO device.
+ *  @buffer:		data transfer buffer aligned for DMA.
+ *  @fifo:		FIFO management structure.
+ *  @timestamp:		interrupt timestamps.
+ */
+struct inv_icm42600_state {
+	struct mutex lock;
+	enum inv_icm42600_chip chip;
+	const char *name;
+	struct regmap *map;
+	struct regulator *vdd_supply;
+	struct regulator *vddio_supply;
+	struct iio_mount_matrix orientation;
+	struct inv_icm42600_conf conf;
+	struct inv_icm42600_suspended suspended;
+	struct iio_dev *indio_gyro;
+	struct iio_dev *indio_accel;
+	uint8_t buffer[2] __aligned(IIO_DMA_MINALIGN);
+	struct inv_icm42600_fifo fifo;
+	struct {
+		int64_t gyro;
+		int64_t accel;
+	} timestamp;
+};
+
+/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
+
+/* Bank selection register, available in all banks */
+#define INV_ICM42600_REG_BANK_SEL			0x76
+#define INV_ICM42600_BANK_SEL_MASK			GENMASK(2, 0)
+
+/* User bank 0 (MSB 0x00) */
+#define INV_ICM42600_REG_DEVICE_CONFIG			0x0011
+#define INV_ICM42600_DEVICE_CONFIG_SOFT_RESET		BIT(0)
+
+#define INV_ICM42600_REG_DRIVE_CONFIG			0x0013
+#define INV_ICM42600_DRIVE_CONFIG_I2C_MASK		GENMASK(5, 3)
+#define INV_ICM42600_DRIVE_CONFIG_I2C(_rate)		\
+		FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_I2C_MASK, (_rate))
+#define INV_ICM42600_DRIVE_CONFIG_SPI_MASK		GENMASK(2, 0)
+#define INV_ICM42600_DRIVE_CONFIG_SPI(_rate)		\
+		FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_SPI_MASK, (_rate))
+
+#define INV_ICM42600_REG_INT_CONFIG			0x0014
+#define INV_ICM42600_INT_CONFIG_INT2_LATCHED		BIT(5)
+#define INV_ICM42600_INT_CONFIG_INT2_PUSH_PULL		BIT(4)
+#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_HIGH	BIT(3)
+#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_LOW		0x00
+#define INV_ICM42600_INT_CONFIG_INT1_LATCHED		BIT(2)
+#define INV_ICM42600_INT_CONFIG_INT1_PUSH_PULL		BIT(1)
+#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_HIGH	BIT(0)
+#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_LOW		0x00
+
+#define INV_ICM42600_REG_FIFO_CONFIG			0x0016
+#define INV_ICM42600_FIFO_CONFIG_MASK			GENMASK(7, 6)
+#define INV_ICM42600_FIFO_CONFIG_BYPASS			\
+		FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 0)
+#define INV_ICM42600_FIFO_CONFIG_STREAM			\
+		FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 1)
+#define INV_ICM42600_FIFO_CONFIG_STOP_ON_FULL		\
+		FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 2)
+
+/* all sensor data are 16 bits (2 registers wide) in big-endian */
+#define INV_ICM42600_REG_TEMP_DATA			0x001D
+#define INV_ICM42600_REG_ACCEL_DATA_X			0x001F
+#define INV_ICM42600_REG_ACCEL_DATA_Y			0x0021
+#define INV_ICM42600_REG_ACCEL_DATA_Z			0x0023
+#define INV_ICM42600_REG_GYRO_DATA_X			0x0025
+#define INV_ICM42600_REG_GYRO_DATA_Y			0x0027
+#define INV_ICM42600_REG_GYRO_DATA_Z			0x0029
+#define INV_ICM42600_DATA_INVALID			-32768
+
+#define INV_ICM42600_REG_INT_STATUS			0x002D
+#define INV_ICM42600_INT_STATUS_UI_FSYNC		BIT(6)
+#define INV_ICM42600_INT_STATUS_PLL_RDY			BIT(5)
+#define INV_ICM42600_INT_STATUS_RESET_DONE		BIT(4)
+#define INV_ICM42600_INT_STATUS_DATA_RDY		BIT(3)
+#define INV_ICM42600_INT_STATUS_FIFO_THS		BIT(2)
+#define INV_ICM42600_INT_STATUS_FIFO_FULL		BIT(1)
+#define INV_ICM42600_INT_STATUS_AGC_RDY			BIT(0)
+
+/*
+ * FIFO access registers
+ * FIFO count is 16 bits (2 registers) big-endian
+ * FIFO data is a continuous read register to read FIFO content
+ */
+#define INV_ICM42600_REG_FIFO_COUNT			0x002E
+#define INV_ICM42600_REG_FIFO_DATA			0x0030
+
+#define INV_ICM42600_REG_SIGNAL_PATH_RESET		0x004B
+#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_INIT_EN	BIT(6)
+#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_MEM_RESET	BIT(5)
+#define INV_ICM42600_SIGNAL_PATH_RESET_RESET		BIT(3)
+#define INV_ICM42600_SIGNAL_PATH_RESET_TMST_STROBE	BIT(2)
+#define INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH	BIT(1)
+
+/* default configuration: all data big-endian and fifo count in bytes */
+#define INV_ICM42600_REG_INTF_CONFIG0			0x004C
+#define INV_ICM42600_INTF_CONFIG0_FIFO_HOLD_LAST_DATA	BIT(7)
+#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_REC	BIT(6)
+#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_ENDIAN	BIT(5)
+#define INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN	BIT(4)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK	GENMASK(1, 0)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS	\
+		FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 2)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS	\
+		FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 3)
+
+#define INV_ICM42600_REG_INTF_CONFIG1			0x004D
+#define INV_ICM42600_INTF_CONFIG1_ACCEL_LP_CLK_RC	BIT(3)
+
+#define INV_ICM42600_REG_PWR_MGMT0			0x004E
+#define INV_ICM42600_PWR_MGMT0_TEMP_DIS			BIT(5)
+#define INV_ICM42600_PWR_MGMT0_IDLE			BIT(4)
+#define INV_ICM42600_PWR_MGMT0_GYRO(_mode)		\
+		FIELD_PREP(GENMASK(3, 2), (_mode))
+#define INV_ICM42600_PWR_MGMT0_ACCEL(_mode)		\
+		FIELD_PREP(GENMASK(1, 0), (_mode))
+
+#define INV_ICM42600_REG_GYRO_CONFIG0			0x004F
+#define INV_ICM42600_GYRO_CONFIG0_FS(_fs)		\
+		FIELD_PREP(GENMASK(7, 5), (_fs))
+#define INV_ICM42600_GYRO_CONFIG0_ODR(_odr)		\
+		FIELD_PREP(GENMASK(3, 0), (_odr))
+
+#define INV_ICM42600_REG_ACCEL_CONFIG0			0x0050
+#define INV_ICM42600_ACCEL_CONFIG0_FS(_fs)		\
+		FIELD_PREP(GENMASK(7, 5), (_fs))
+#define INV_ICM42600_ACCEL_CONFIG0_ODR(_odr)		\
+		FIELD_PREP(GENMASK(3, 0), (_odr))
+
+#define INV_ICM42600_REG_GYRO_ACCEL_CONFIG0		0x0052
+#define INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(_f)	\
+		FIELD_PREP(GENMASK(7, 4), (_f))
+#define INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(_f)	\
+		FIELD_PREP(GENMASK(3, 0), (_f))
+
+#define INV_ICM42600_REG_TMST_CONFIG			0x0054
+#define INV_ICM42600_TMST_CONFIG_MASK			GENMASK(4, 0)
+#define INV_ICM42600_TMST_CONFIG_TMST_TO_REGS_EN	BIT(4)
+#define INV_ICM42600_TMST_CONFIG_TMST_RES_16US		BIT(3)
+#define INV_ICM42600_TMST_CONFIG_TMST_DELTA_EN		BIT(2)
+#define INV_ICM42600_TMST_CONFIG_TMST_FSYNC_EN		BIT(1)
+#define INV_ICM42600_TMST_CONFIG_TMST_EN		BIT(0)
+
+#define INV_ICM42600_REG_FIFO_CONFIG1			0x005F
+#define INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD	BIT(6)
+#define INV_ICM42600_FIFO_CONFIG1_WM_GT_TH		BIT(5)
+#define INV_ICM42600_FIFO_CONFIG1_TMST_FSYNC_EN		BIT(3)
+#define INV_ICM42600_FIFO_CONFIG1_TEMP_EN		BIT(2)
+#define INV_ICM42600_FIFO_CONFIG1_GYRO_EN		BIT(1)
+#define INV_ICM42600_FIFO_CONFIG1_ACCEL_EN		BIT(0)
+
+/* FIFO watermark is 16 bits (2 registers wide) in little-endian */
+#define INV_ICM42600_REG_FIFO_WATERMARK			0x0060
+#define INV_ICM42600_FIFO_WATERMARK_VAL(_wm)		\
+		cpu_to_le16((_wm) & GENMASK(11, 0))
+/* FIFO is 2048 bytes, let 12 samples for reading latency */
+#define INV_ICM42600_FIFO_WATERMARK_MAX			(2048 - 12 * 16)
+
+#define INV_ICM42600_REG_INT_CONFIG1			0x0064
+#define INV_ICM42600_INT_CONFIG1_TPULSE_DURATION	BIT(6)
+#define INV_ICM42600_INT_CONFIG1_TDEASSERT_DISABLE	BIT(5)
+#define INV_ICM42600_INT_CONFIG1_ASYNC_RESET		BIT(4)
+
+#define INV_ICM42600_REG_INT_SOURCE0			0x0065
+#define INV_ICM42600_INT_SOURCE0_UI_FSYNC_INT1_EN	BIT(6)
+#define INV_ICM42600_INT_SOURCE0_PLL_RDY_INT1_EN	BIT(5)
+#define INV_ICM42600_INT_SOURCE0_RESET_DONE_INT1_EN	BIT(4)
+#define INV_ICM42600_INT_SOURCE0_UI_DRDY_INT1_EN	BIT(3)
+#define INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN	BIT(2)
+#define INV_ICM42600_INT_SOURCE0_FIFO_FULL_INT1_EN	BIT(1)
+#define INV_ICM42600_INT_SOURCE0_UI_AGC_RDY_INT1_EN	BIT(0)
+
+#define INV_ICM42600_REG_WHOAMI				0x0075
+#define INV_ICM42600_WHOAMI_ICM42600			0x40
+#define INV_ICM42600_WHOAMI_ICM42602			0x41
+#define INV_ICM42600_WHOAMI_ICM42605			0x42
+#define INV_ICM42600_WHOAMI_ICM42622			0x46
+#define INV_ICM42600_WHOAMI_ICM42631			0x5C
+
+/* User bank 1 (MSB 0x10) */
+#define INV_ICM42600_REG_SENSOR_CONFIG0			0x1003
+#define INV_ICM42600_SENSOR_CONFIG0_ZG_DISABLE		BIT(5)
+#define INV_ICM42600_SENSOR_CONFIG0_YG_DISABLE		BIT(4)
+#define INV_ICM42600_SENSOR_CONFIG0_XG_DISABLE		BIT(3)
+#define INV_ICM42600_SENSOR_CONFIG0_ZA_DISABLE		BIT(2)
+#define INV_ICM42600_SENSOR_CONFIG0_YA_DISABLE		BIT(1)
+#define INV_ICM42600_SENSOR_CONFIG0_XA_DISABLE		BIT(0)
+
+/* Timestamp value is 20 bits (3 registers) in little-endian */
+#define INV_ICM42600_REG_TMSTVAL			0x1062
+#define INV_ICM42600_TMSTVAL_MASK			GENMASK(19, 0)
+
+#define INV_ICM42600_REG_INTF_CONFIG4			0x107A
+#define INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY		BIT(6)
+#define INV_ICM42600_INTF_CONFIG4_SPI_AP_4WIRE		BIT(1)
+
+#define INV_ICM42600_REG_INTF_CONFIG6			0x107C
+#define INV_ICM42600_INTF_CONFIG6_MASK			GENMASK(4, 0)
+#define INV_ICM42600_INTF_CONFIG6_I3C_EN		BIT(4)
+#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_BYTE_EN	BIT(3)
+#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_EN		BIT(2)
+#define INV_ICM42600_INTF_CONFIG6_I3C_DDR_EN		BIT(1)
+#define INV_ICM42600_INTF_CONFIG6_I3C_SDR_EN		BIT(0)
+
+/* User bank 4 (MSB 0x40) */
+#define INV_ICM42600_REG_INT_SOURCE8			0x404F
+#define INV_ICM42600_INT_SOURCE8_FSYNC_IBI_EN		BIT(5)
+#define INV_ICM42600_INT_SOURCE8_PLL_RDY_IBI_EN		BIT(4)
+#define INV_ICM42600_INT_SOURCE8_UI_DRDY_IBI_EN		BIT(3)
+#define INV_ICM42600_INT_SOURCE8_FIFO_THS_IBI_EN	BIT(2)
+#define INV_ICM42600_INT_SOURCE8_FIFO_FULL_IBI_EN	BIT(1)
+#define INV_ICM42600_INT_SOURCE8_AGC_RDY_IBI_EN		BIT(0)
+
+#define INV_ICM42600_REG_OFFSET_USER0			0x4077
+#define INV_ICM42600_REG_OFFSET_USER1			0x4078
+#define INV_ICM42600_REG_OFFSET_USER2			0x4079
+#define INV_ICM42600_REG_OFFSET_USER3			0x407A
+#define INV_ICM42600_REG_OFFSET_USER4			0x407B
+#define INV_ICM42600_REG_OFFSET_USER5			0x407C
+#define INV_ICM42600_REG_OFFSET_USER6			0x407D
+#define INV_ICM42600_REG_OFFSET_USER7			0x407E
+#define INV_ICM42600_REG_OFFSET_USER8			0x407F
+
+/* Sleep times required by the driver */
+#define INV_ICM42600_POWER_UP_TIME_MS		100
+#define INV_ICM42600_RESET_TIME_MS		1
+#define INV_ICM42600_ACCEL_STARTUP_TIME_MS	20
+#define INV_ICM42600_GYRO_STARTUP_TIME_MS	60
+#define INV_ICM42600_GYRO_STOP_TIME_MS		150
+#define INV_ICM42600_TEMP_STARTUP_TIME_MS	14
+#define INV_ICM42600_SUSPEND_DELAY_MS		2000
+
+typedef int (*inv_icm42600_bus_setup)(struct inv_icm42600_state *);
+
+extern const struct regmap_config inv_icm42600_regmap_config;
+extern const struct dev_pm_ops inv_icm42600_pm_ops;
+
+const struct iio_mount_matrix *
+inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan);
+
+uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr);
+
+int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,
+				struct inv_icm42600_sensor_conf *conf,
+				unsigned int *sleep_ms);
+
+int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,
+			       struct inv_icm42600_sensor_conf *conf,
+			       unsigned int *sleep_ms);
+
+int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
+			       unsigned int *sleep_ms);
+
+int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
+			     unsigned int writeval, unsigned int *readval);
+
+int inv_icm42600_core_probe(struct regmap *regmap, int chip, int irq,
+			    inv_icm42600_bus_setup bus_setup);
+
+struct iio_dev *inv_icm42600_gyro_init(struct inv_icm42600_state *st);
+
+int inv_icm42600_gyro_parse_fifo(struct iio_dev *indio_dev);
+
+struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st);
+
+int inv_icm42600_accel_parse_fifo(struct iio_dev *indio_dev);
+
+#endif
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
new file mode 100644
index 0000000000..b1e4fde27d
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/math64.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+
+#include "inv_icm42600.h"
+#include "inv_icm42600_temp.h"
+#include "inv_icm42600_buffer.h"
+
+#define INV_ICM42600_ACCEL_CHAN(_modifier, _index, _ext_info)		\
+	{								\
+		.type = IIO_ACCEL,					\
+		.modified = 1,						\
+		.channel2 = _modifier,					\
+		.info_mask_separate =					\
+			BIT(IIO_CHAN_INFO_RAW) |			\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_type =				\
+			BIT(IIO_CHAN_INFO_SCALE),			\
+		.info_mask_shared_by_type_available =			\
+			BIT(IIO_CHAN_INFO_SCALE) |			\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_all =				\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.info_mask_shared_by_all_available =			\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.scan_index = _index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+			.endianness = IIO_BE,				\
+		},							\
+		.ext_info = _ext_info,					\
+	}
+
+enum inv_icm42600_accel_scan {
+	INV_ICM42600_ACCEL_SCAN_X,
+	INV_ICM42600_ACCEL_SCAN_Y,
+	INV_ICM42600_ACCEL_SCAN_Z,
+	INV_ICM42600_ACCEL_SCAN_TEMP,
+	INV_ICM42600_ACCEL_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42600_accel_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42600_get_mount_matrix),
+	{},
+};
+
+static const struct iio_chan_spec inv_icm42600_accel_channels[] = {
+	INV_ICM42600_ACCEL_CHAN(IIO_MOD_X, INV_ICM42600_ACCEL_SCAN_X,
+				inv_icm42600_accel_ext_infos),
+	INV_ICM42600_ACCEL_CHAN(IIO_MOD_Y, INV_ICM42600_ACCEL_SCAN_Y,
+				inv_icm42600_accel_ext_infos),
+	INV_ICM42600_ACCEL_CHAN(IIO_MOD_Z, INV_ICM42600_ACCEL_SCAN_Z,
+				inv_icm42600_accel_ext_infos),
+	INV_ICM42600_TEMP_CHAN(INV_ICM42600_ACCEL_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42600_ACCEL_SCAN_TIMESTAMP),
+};
+
+/*
+ * IIO buffer data: size must be a power of 2 and timestamp aligned
+ * 16 bytes: 6 bytes acceleration, 2 bytes temperature, 8 bytes timestamp
+ */
+struct inv_icm42600_accel_buffer {
+	struct inv_icm42600_fifo_sensor_data accel;
+	int16_t temp;
+	int64_t timestamp __aligned(8);
+};
+
+#define INV_ICM42600_SCAN_MASK_ACCEL_3AXIS				\
+	(BIT(INV_ICM42600_ACCEL_SCAN_X) |				\
+	BIT(INV_ICM42600_ACCEL_SCAN_Y) |				\
+	BIT(INV_ICM42600_ACCEL_SCAN_Z))
+
+#define INV_ICM42600_SCAN_MASK_TEMP	BIT(INV_ICM42600_ACCEL_SCAN_TEMP)
+
+static const unsigned long inv_icm42600_accel_scan_masks[] = {
+	/* 3-axis accel + temperature */
+	INV_ICM42600_SCAN_MASK_ACCEL_3AXIS | INV_ICM42600_SCAN_MASK_TEMP,
+	0,
+};
+
+/* enable accelerometer sensor and FIFO write */
+static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev,
+					       const unsigned long *scan_mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int fifo_en = 0;
+	unsigned int sleep_temp = 0;
+	unsigned int sleep_accel = 0;
+	unsigned int sleep;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42600_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42600_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+		fifo_en |= INV_ICM42600_SENSOR_TEMP;
+	}
+
+	if (*scan_mask & INV_ICM42600_SCAN_MASK_ACCEL_3AXIS) {
+		/* enable accel sensor */
+		conf.mode = INV_ICM42600_SENSOR_MODE_LOW_NOISE;
+		ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_accel);
+		if (ret)
+			goto out_unlock;
+		fifo_en |= INV_ICM42600_SENSOR_ACCEL;
+	}
+
+	/* update data FIFO write */
+	inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
+	ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
+	if (ret)
+		goto out_unlock;
+
+	ret = inv_icm42600_buffer_update_watermark(st);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/* sleep maximum required time */
+	if (sleep_accel > sleep_temp)
+		sleep = sleep_accel;
+	else
+		sleep = sleep_temp;
+	if (sleep)
+		msleep(sleep);
+	return ret;
+}
+
+static int inv_icm42600_accel_read_sensor(struct inv_icm42600_state *st,
+					  struct iio_chan_spec const *chan,
+					  int16_t *val)
+{
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_ACCEL_DATA_X;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_ACCEL_DATA_Y;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_ACCEL_DATA_Z;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	/* enable accel sensor */
+	conf.mode = INV_ICM42600_SENSOR_MODE_LOW_NOISE;
+	ret = inv_icm42600_set_accel_conf(st, &conf, NULL);
+	if (ret)
+		goto exit;
+
+	/* read accel register data */
+	data = (__be16 *)&st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		goto exit;
+
+	*val = (int16_t)be16_to_cpup(data);
+	if (*val == INV_ICM42600_DATA_INVALID)
+		ret = -EINVAL;
+exit:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+/* IIO format int + nano */
+static const int inv_icm42600_accel_scale[] = {
+	/* +/- 16G => 0.004788403 m/s-2 */
+	[2 * INV_ICM42600_ACCEL_FS_16G] = 0,
+	[2 * INV_ICM42600_ACCEL_FS_16G + 1] = 4788403,
+	/* +/- 8G => 0.002394202 m/s-2 */
+	[2 * INV_ICM42600_ACCEL_FS_8G] = 0,
+	[2 * INV_ICM42600_ACCEL_FS_8G + 1] = 2394202,
+	/* +/- 4G => 0.001197101 m/s-2 */
+	[2 * INV_ICM42600_ACCEL_FS_4G] = 0,
+	[2 * INV_ICM42600_ACCEL_FS_4G + 1] = 1197101,
+	/* +/- 2G => 0.000598550 m/s-2 */
+	[2 * INV_ICM42600_ACCEL_FS_2G] = 0,
+	[2 * INV_ICM42600_ACCEL_FS_2G + 1] = 598550,
+};
+
+static int inv_icm42600_accel_read_scale(struct inv_icm42600_state *st,
+					 int *val, int *val2)
+{
+	unsigned int idx;
+
+	idx = st->conf.accel.fs;
+
+	*val = inv_icm42600_accel_scale[2 * idx];
+	*val2 = inv_icm42600_accel_scale[2 * idx + 1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42600_accel_write_scale(struct inv_icm42600_state *st,
+					  int val, int val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 0; idx < ARRAY_SIZE(inv_icm42600_accel_scale); idx += 2) {
+		if (val == inv_icm42600_accel_scale[idx] &&
+		    val2 == inv_icm42600_accel_scale[idx + 1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42600_accel_scale))
+		return -EINVAL;
+
+	conf.fs = idx / 2;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_set_accel_conf(st, &conf, NULL);
+
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+/* IIO format int + micro */
+static const int inv_icm42600_accel_odr[] = {
+	/* 12.5Hz */
+	12, 500000,
+	/* 25Hz */
+	25, 0,
+	/* 50Hz */
+	50, 0,
+	/* 100Hz */
+	100, 0,
+	/* 200Hz */
+	200, 0,
+	/* 1kHz */
+	1000, 0,
+	/* 2kHz */
+	2000, 0,
+	/* 4kHz */
+	4000, 0,
+};
+
+static const int inv_icm42600_accel_odr_conv[] = {
+	INV_ICM42600_ODR_12_5HZ,
+	INV_ICM42600_ODR_25HZ,
+	INV_ICM42600_ODR_50HZ,
+	INV_ICM42600_ODR_100HZ,
+	INV_ICM42600_ODR_200HZ,
+	INV_ICM42600_ODR_1KHZ_LN,
+	INV_ICM42600_ODR_2KHZ_LN,
+	INV_ICM42600_ODR_4KHZ_LN,
+};
+
+static int inv_icm42600_accel_read_odr(struct inv_icm42600_state *st,
+				       int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.accel.odr;
+
+	for (i = 0; i < ARRAY_SIZE(inv_icm42600_accel_odr_conv); ++i) {
+		if (inv_icm42600_accel_odr_conv[i] == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42600_accel_odr_conv))
+		return -EINVAL;
+
+	*val = inv_icm42600_accel_odr[2 * i];
+	*val2 = inv_icm42600_accel_odr[2 * i + 1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42600_accel_write_odr(struct iio_dev *indio_dev,
+					int val, int val2)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 0; idx < ARRAY_SIZE(inv_icm42600_accel_odr); idx += 2) {
+		if (val == inv_icm42600_accel_odr[idx] &&
+		    val2 == inv_icm42600_accel_odr[idx + 1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42600_accel_odr))
+		return -EINVAL;
+
+	conf.odr = inv_icm42600_accel_odr_conv[idx / 2];
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42600_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		goto out_unlock;
+
+	ret = inv_icm42600_set_accel_conf(st, &conf, NULL);
+	if (ret)
+		goto out_unlock;
+	inv_icm42600_buffer_update_fifo_period(st);
+	inv_icm42600_buffer_update_watermark(st);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+/*
+ * Calibration bias values, IIO range format int + micro.
+ * Value is limited to +/-1g coded on 12 bits signed. Step is 0.5mg.
+ */
+static int inv_icm42600_accel_calibbias[] = {
+	-10, 42010,		/* min: -10.042010 m/s² */
+	0, 4903,		/* step: 0.004903 m/s² */
+	10, 37106,		/* max: 10.037106 m/s² */
+};
+
+static int inv_icm42600_accel_read_offset(struct inv_icm42600_state *st,
+					  struct iio_chan_spec const *chan,
+					  int *val, int *val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	int64_t val64;
+	int32_t bias;
+	unsigned int reg;
+	int16_t offset;
+	uint8_t data[2];
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_OFFSET_USER4;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_OFFSET_USER6;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_OFFSET_USER7;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = regmap_bulk_read(st->map, reg, st->buffer, sizeof(data));
+	memcpy(data, st->buffer, sizeof(data));
+
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	if (ret)
+		return ret;
+
+	/* 12 bits signed value */
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		offset = sign_extend32(((data[0] & 0xF0) << 4) | data[1], 11);
+		break;
+	case IIO_MOD_Y:
+		offset = sign_extend32(((data[1] & 0x0F) << 8) | data[0], 11);
+		break;
+	case IIO_MOD_Z:
+		offset = sign_extend32(((data[0] & 0xF0) << 4) | data[1], 11);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * convert raw offset to g then to m/s²
+	 * 12 bits signed raw step 0.5mg to g: 5 / 10000
+	 * g to m/s²: 9.806650
+	 * result in micro (1000000)
+	 * (offset * 5 * 9.806650 * 1000000) / 10000
+	 */
+	val64 = (int64_t)offset * 5LL * 9806650LL;
+	/* for rounding, add + or - divisor (10000) divided by 2 */
+	if (val64 >= 0)
+		val64 += 10000LL / 2LL;
+	else
+		val64 -= 10000LL / 2LL;
+	bias = div_s64(val64, 10000L);
+	*val = bias / 1000000L;
+	*val2 = bias % 1000000L;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42600_accel_write_offset(struct inv_icm42600_state *st,
+					   struct iio_chan_spec const *chan,
+					   int val, int val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	int64_t val64;
+	int32_t min, max;
+	unsigned int reg, regval;
+	int16_t offset;
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_OFFSET_USER4;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_OFFSET_USER6;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_OFFSET_USER7;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* inv_icm42600_accel_calibbias: min - step - max in micro */
+	min = inv_icm42600_accel_calibbias[0] * 1000000L +
+	      inv_icm42600_accel_calibbias[1];
+	max = inv_icm42600_accel_calibbias[4] * 1000000L +
+	      inv_icm42600_accel_calibbias[5];
+	val64 = (int64_t)val * 1000000LL + (int64_t)val2;
+	if (val64 < min || val64 > max)
+		return -EINVAL;
+
+	/*
+	 * convert m/s² to g then to raw value
+	 * m/s² to g: 1 / 9.806650
+	 * g to raw 12 bits signed, step 0.5mg: 10000 / 5
+	 * val in micro (1000000)
+	 * val * 10000 / (9.806650 * 1000000 * 5)
+	 */
+	val64 = val64 * 10000LL;
+	/* for rounding, add + or - divisor (9806650 * 5) divided by 2 */
+	if (val64 >= 0)
+		val64 += 9806650 * 5 / 2;
+	else
+		val64 -= 9806650 * 5 / 2;
+	offset = div_s64(val64, 9806650 * 5);
+
+	/* clamp value limited to 12 bits signed */
+	if (offset < -2048)
+		offset = -2048;
+	else if (offset > 2047)
+		offset = 2047;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		/* OFFSET_USER4 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER4,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = ((offset & 0xF00) >> 4) | (regval & 0x0F);
+		st->buffer[1] = offset & 0xFF;
+		break;
+	case IIO_MOD_Y:
+		/* OFFSET_USER7 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER7,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = offset & 0xFF;
+		st->buffer[1] = ((offset & 0xF00) >> 8) | (regval & 0xF0);
+		break;
+	case IIO_MOD_Z:
+		/* OFFSET_USER7 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER7,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = ((offset & 0xF00) >> 4) | (regval & 0x0F);
+		st->buffer[1] = offset & 0xFF;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ret = regmap_bulk_write(st->map, reg, st->buffer, 2);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+static int inv_icm42600_accel_read_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int *val, int *val2, long mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int16_t data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ACCEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42600_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_accel_read_sensor(st, chan, &data);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42600_accel_read_scale(st, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42600_accel_read_odr(st, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return inv_icm42600_accel_read_offset(st, chan, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_accel_read_avail(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 const int **vals,
+					 int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = inv_icm42600_accel_scale;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42600_accel_scale);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = inv_icm42600_accel_odr;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(inv_icm42600_accel_odr);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*vals = inv_icm42600_accel_calibbias;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_RANGE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_accel_write_raw(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					int val, int val2, long mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_accel_write_scale(st, val, val2);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42600_accel_write_odr(indio_dev, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_accel_write_offset(st, chan, val, val2);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_accel_write_raw_get_fmt(struct iio_dev *indio_dev,
+						struct iio_chan_spec const *chan,
+						long mask)
+{
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_accel_hwfifo_set_watermark(struct iio_dev *indio_dev,
+						   unsigned int val)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	st->fifo.watermark.accel = val;
+	ret = inv_icm42600_buffer_update_watermark(st);
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int inv_icm42600_accel_hwfifo_flush(struct iio_dev *indio_dev,
+					   unsigned int count)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (count == 0)
+		return 0;
+
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_buffer_hwfifo_flush(st, count);
+	if (!ret)
+		ret = st->fifo.nb.accel;
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_info inv_icm42600_accel_info = {
+	.read_raw = inv_icm42600_accel_read_raw,
+	.read_avail = inv_icm42600_accel_read_avail,
+	.write_raw = inv_icm42600_accel_write_raw,
+	.write_raw_get_fmt = inv_icm42600_accel_write_raw_get_fmt,
+	.debugfs_reg_access = inv_icm42600_debugfs_reg,
+	.update_scan_mode = inv_icm42600_accel_update_scan_mode,
+	.hwfifo_set_watermark = inv_icm42600_accel_hwfifo_set_watermark,
+	.hwfifo_flush_to_buffer = inv_icm42600_accel_hwfifo_flush,
+};
+
+struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct inv_sensors_timestamp *ts;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-accel", st->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*ts));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42600_odr_to_period(st->conf.accel.odr);
+	ts = iio_priv(indio_dev);
+	inv_sensors_timestamp_init(ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42600_accel_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42600_accel_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42600_accel_channels);
+	indio_dev->available_scan_masks = inv_icm42600_accel_scan_masks;
+
+	ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
+					  &inv_icm42600_buffer_ops);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
+
+int inv_icm42600_accel_parse_fifo(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	ssize_t i, size;
+	unsigned int no;
+	const void *accel, *gyro, *timestamp;
+	const int8_t *temp;
+	unsigned int odr;
+	int64_t ts_val;
+	struct inv_icm42600_accel_buffer buffer;
+
+	/* parse all fifo packets */
+	for (i = 0, no = 0; i < st->fifo.count; i += size, ++no) {
+		size = inv_icm42600_fifo_decode_packet(&st->fifo.data[i],
+				&accel, &gyro, &temp, &timestamp, &odr);
+		/* quit if error or FIFO is empty */
+		if (size <= 0)
+			return size;
+
+		/* skip packet if no accel data or data is invalid */
+		if (accel == NULL || !inv_icm42600_fifo_is_data_valid(accel))
+			continue;
+
+		/* update odr */
+		if (odr & INV_ICM42600_SENSOR_ACCEL)
+			inv_sensors_timestamp_apply_odr(ts, st->fifo.period,
+							st->fifo.nb.total, no);
+
+		/* buffer is copied to userspace, zeroing it to avoid any data leak */
+		memset(&buffer, 0, sizeof(buffer));
+		memcpy(&buffer.accel, accel, sizeof(buffer.accel));
+		/* convert 8 bits FIFO temperature in high resolution format */
+		buffer.temp = temp ? (*temp * 64) : 0;
+		ts_val = inv_sensors_timestamp_pop(ts);
+		iio_push_to_buffers_with_timestamp(indio_dev, &buffer, ts_val);
+	}
+
+	return 0;
+}
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
new file mode 100644
index 0000000000..6ef1df9d60
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/iio.h>
+
+#include "inv_icm42600.h"
+#include "inv_icm42600_buffer.h"
+
+/* FIFO header: 1 byte */
+#define INV_ICM42600_FIFO_HEADER_MSG		BIT(7)
+#define INV_ICM42600_FIFO_HEADER_ACCEL		BIT(6)
+#define INV_ICM42600_FIFO_HEADER_GYRO		BIT(5)
+#define INV_ICM42600_FIFO_HEADER_TMST_FSYNC	GENMASK(3, 2)
+#define INV_ICM42600_FIFO_HEADER_ODR_ACCEL	BIT(1)
+#define INV_ICM42600_FIFO_HEADER_ODR_GYRO	BIT(0)
+
+struct inv_icm42600_fifo_1sensor_packet {
+	uint8_t header;
+	struct inv_icm42600_fifo_sensor_data data;
+	int8_t temp;
+} __packed;
+#define INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE		8
+
+struct inv_icm42600_fifo_2sensors_packet {
+	uint8_t header;
+	struct inv_icm42600_fifo_sensor_data accel;
+	struct inv_icm42600_fifo_sensor_data gyro;
+	int8_t temp;
+	__be16 timestamp;
+} __packed;
+#define INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE		16
+
+ssize_t inv_icm42600_fifo_decode_packet(const void *packet, const void **accel,
+					const void **gyro, const int8_t **temp,
+					const void **timestamp, unsigned int *odr)
+{
+	const struct inv_icm42600_fifo_1sensor_packet *pack1 = packet;
+	const struct inv_icm42600_fifo_2sensors_packet *pack2 = packet;
+	uint8_t header = *((const uint8_t *)packet);
+
+	/* FIFO empty */
+	if (header & INV_ICM42600_FIFO_HEADER_MSG) {
+		*accel = NULL;
+		*gyro = NULL;
+		*temp = NULL;
+		*timestamp = NULL;
+		*odr = 0;
+		return 0;
+	}
+
+	/* handle odr flags */
+	*odr = 0;
+	if (header & INV_ICM42600_FIFO_HEADER_ODR_GYRO)
+		*odr |= INV_ICM42600_SENSOR_GYRO;
+	if (header & INV_ICM42600_FIFO_HEADER_ODR_ACCEL)
+		*odr |= INV_ICM42600_SENSOR_ACCEL;
+
+	/* accel + gyro */
+	if ((header & INV_ICM42600_FIFO_HEADER_ACCEL) &&
+	    (header & INV_ICM42600_FIFO_HEADER_GYRO)) {
+		*accel = &pack2->accel;
+		*gyro = &pack2->gyro;
+		*temp = &pack2->temp;
+		*timestamp = &pack2->timestamp;
+		return INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE;
+	}
+
+	/* accel only */
+	if (header & INV_ICM42600_FIFO_HEADER_ACCEL) {
+		*accel = &pack1->data;
+		*gyro = NULL;
+		*temp = &pack1->temp;
+		*timestamp = NULL;
+		return INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE;
+	}
+
+	/* gyro only */
+	if (header & INV_ICM42600_FIFO_HEADER_GYRO) {
+		*accel = NULL;
+		*gyro = &pack1->data;
+		*temp = &pack1->temp;
+		*timestamp = NULL;
+		return INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE;
+	}
+
+	/* invalid packet if here */
+	return -EINVAL;
+}
+
+void inv_icm42600_buffer_update_fifo_period(struct inv_icm42600_state *st)
+{
+	uint32_t period_gyro, period_accel, period;
+
+	if (st->fifo.en & INV_ICM42600_SENSOR_GYRO)
+		period_gyro = inv_icm42600_odr_to_period(st->conf.gyro.odr);
+	else
+		period_gyro = U32_MAX;
+
+	if (st->fifo.en & INV_ICM42600_SENSOR_ACCEL)
+		period_accel = inv_icm42600_odr_to_period(st->conf.accel.odr);
+	else
+		period_accel = U32_MAX;
+
+	if (period_gyro <= period_accel)
+		period = period_gyro;
+	else
+		period = period_accel;
+
+	st->fifo.period = period;
+}
+
+int inv_icm42600_buffer_set_fifo_en(struct inv_icm42600_state *st,
+				    unsigned int fifo_en)
+{
+	unsigned int mask, val;
+	int ret;
+
+	/* update only FIFO EN bits */
+	mask = INV_ICM42600_FIFO_CONFIG1_TMST_FSYNC_EN |
+		INV_ICM42600_FIFO_CONFIG1_TEMP_EN |
+		INV_ICM42600_FIFO_CONFIG1_GYRO_EN |
+		INV_ICM42600_FIFO_CONFIG1_ACCEL_EN;
+
+	val = 0;
+	if (fifo_en & INV_ICM42600_SENSOR_GYRO)
+		val |= INV_ICM42600_FIFO_CONFIG1_GYRO_EN;
+	if (fifo_en & INV_ICM42600_SENSOR_ACCEL)
+		val |= INV_ICM42600_FIFO_CONFIG1_ACCEL_EN;
+	if (fifo_en & INV_ICM42600_SENSOR_TEMP)
+		val |= INV_ICM42600_FIFO_CONFIG1_TEMP_EN;
+
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_FIFO_CONFIG1, mask, val);
+	if (ret)
+		return ret;
+
+	st->fifo.en = fifo_en;
+	inv_icm42600_buffer_update_fifo_period(st);
+
+	return 0;
+}
+
+static size_t inv_icm42600_get_packet_size(unsigned int fifo_en)
+{
+	size_t packet_size;
+
+	if ((fifo_en & INV_ICM42600_SENSOR_GYRO) &&
+	    (fifo_en & INV_ICM42600_SENSOR_ACCEL))
+		packet_size = INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE;
+	else
+		packet_size = INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE;
+
+	return packet_size;
+}
+
+static unsigned int inv_icm42600_wm_truncate(unsigned int watermark,
+					     size_t packet_size)
+{
+	size_t wm_size;
+	unsigned int wm;
+
+	wm_size = watermark * packet_size;
+	if (wm_size > INV_ICM42600_FIFO_WATERMARK_MAX)
+		wm_size = INV_ICM42600_FIFO_WATERMARK_MAX;
+
+	wm = wm_size / packet_size;
+
+	return wm;
+}
+
+/**
+ * inv_icm42600_buffer_update_watermark - update watermark FIFO threshold
+ * @st:	driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * FIFO watermark threshold is computed based on the required watermark values
+ * set for gyro and accel sensors. Since watermark is all about acceptable data
+ * latency, use the smallest setting between the 2. It means choosing the
+ * smallest latency but this is not as simple as choosing the smallest watermark
+ * value. Latency depends on watermark and ODR. It requires several steps:
+ * 1) compute gyro and accel latencies and choose the smallest value.
+ * 2) adapt the choosen latency so that it is a multiple of both gyro and accel
+ *    ones. Otherwise it is possible that you don't meet a requirement. (for
+ *    example with gyro @100Hz wm 4 and accel @100Hz with wm 6, choosing the
+ *    value of 4 will not meet accel latency requirement because 6 is not a
+ *    multiple of 4. You need to use the value 2.)
+ * 3) Since all periods are multiple of each others, watermark is computed by
+ *    dividing this computed latency by the smallest period, which corresponds
+ *    to the FIFO frequency. Beware that this is only true because we are not
+ *    using 500Hz frequency which is not a multiple of the others.
+ */
+int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st)
+{
+	size_t packet_size, wm_size;
+	unsigned int wm_gyro, wm_accel, watermark;
+	uint32_t period_gyro, period_accel, period;
+	uint32_t latency_gyro, latency_accel, latency;
+	bool restore;
+	__le16 raw_wm;
+	int ret;
+
+	packet_size = inv_icm42600_get_packet_size(st->fifo.en);
+
+	/* compute sensors latency, depending on sensor watermark and odr */
+	wm_gyro = inv_icm42600_wm_truncate(st->fifo.watermark.gyro, packet_size);
+	wm_accel = inv_icm42600_wm_truncate(st->fifo.watermark.accel, packet_size);
+	/* use us for odr to avoid overflow using 32 bits values */
+	period_gyro = inv_icm42600_odr_to_period(st->conf.gyro.odr) / 1000UL;
+	period_accel = inv_icm42600_odr_to_period(st->conf.accel.odr) / 1000UL;
+	latency_gyro = period_gyro * wm_gyro;
+	latency_accel = period_accel * wm_accel;
+
+	/* 0 value for watermark means that the sensor is turned off */
+	if (latency_gyro == 0) {
+		watermark = wm_accel;
+	} else if (latency_accel == 0) {
+		watermark = wm_gyro;
+	} else {
+		/* compute the smallest latency that is a multiple of both */
+		if (latency_gyro <= latency_accel)
+			latency = latency_gyro - (latency_accel % latency_gyro);
+		else
+			latency = latency_accel - (latency_gyro % latency_accel);
+		/* use the shortest period */
+		if (period_gyro <= period_accel)
+			period = period_gyro;
+		else
+			period = period_accel;
+		/* all this works because periods are multiple of each others */
+		watermark = latency / period;
+		if (watermark < 1)
+			watermark = 1;
+	}
+
+	/* compute watermark value in bytes */
+	wm_size = watermark * packet_size;
+
+	/* changing FIFO watermark requires to turn off watermark interrupt */
+	ret = regmap_update_bits_check(st->map, INV_ICM42600_REG_INT_SOURCE0,
+				       INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN,
+				       0, &restore);
+	if (ret)
+		return ret;
+
+	raw_wm = INV_ICM42600_FIFO_WATERMARK_VAL(wm_size);
+	memcpy(st->buffer, &raw_wm, sizeof(raw_wm));
+	ret = regmap_bulk_write(st->map, INV_ICM42600_REG_FIFO_WATERMARK,
+				st->buffer, sizeof(raw_wm));
+	if (ret)
+		return ret;
+
+	/* restore watermark interrupt */
+	if (restore) {
+		ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0,
+					 INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN,
+					 INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int inv_icm42600_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(dev);
+
+	mutex_lock(&st->lock);
+	inv_sensors_timestamp_reset(ts);
+	mutex_unlock(&st->lock);
+
+	return 0;
+}
+
+/*
+ * update_scan_mode callback is turning sensors on and setting data FIFO enable
+ * bits.
+ */
+static int inv_icm42600_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	/* exit if FIFO is already on */
+	if (st->fifo.on) {
+		ret = 0;
+		goto out_on;
+	}
+
+	/* set FIFO threshold interrupt */
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0,
+				 INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN,
+				 INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN);
+	if (ret)
+		goto out_unlock;
+
+	/* flush FIFO data */
+	ret = regmap_write(st->map, INV_ICM42600_REG_SIGNAL_PATH_RESET,
+			   INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH);
+	if (ret)
+		goto out_unlock;
+
+	/* set FIFO in streaming mode */
+	ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG,
+			   INV_ICM42600_FIFO_CONFIG_STREAM);
+	if (ret)
+		goto out_unlock;
+
+	/* workaround: first read of FIFO count after reset is always 0 */
+	ret = regmap_bulk_read(st->map, INV_ICM42600_REG_FIFO_COUNT, st->buffer, 2);
+	if (ret)
+		goto out_unlock;
+
+out_on:
+	/* increase FIFO on counter */
+	st->fifo.on++;
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int inv_icm42600_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	/* exit if there are several sensors using the FIFO */
+	if (st->fifo.on > 1) {
+		ret = 0;
+		goto out_off;
+	}
+
+	/* set FIFO in bypass mode */
+	ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG,
+			   INV_ICM42600_FIFO_CONFIG_BYPASS);
+	if (ret)
+		goto out_unlock;
+
+	/* flush FIFO data */
+	ret = regmap_write(st->map, INV_ICM42600_REG_SIGNAL_PATH_RESET,
+			   INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH);
+	if (ret)
+		goto out_unlock;
+
+	/* disable FIFO threshold interrupt */
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0,
+				 INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN, 0);
+	if (ret)
+		goto out_unlock;
+
+out_off:
+	/* decrease FIFO on counter */
+	st->fifo.on--;
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int inv_icm42600_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int sensor;
+	unsigned int *watermark;
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int sleep_temp = 0;
+	unsigned int sleep_sensor = 0;
+	unsigned int sleep;
+	int ret;
+
+	if (indio_dev == st->indio_gyro) {
+		sensor = INV_ICM42600_SENSOR_GYRO;
+		watermark = &st->fifo.watermark.gyro;
+	} else if (indio_dev == st->indio_accel) {
+		sensor = INV_ICM42600_SENSOR_ACCEL;
+		watermark = &st->fifo.watermark.accel;
+	} else {
+		return -EINVAL;
+	}
+
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_buffer_set_fifo_en(st, st->fifo.en & ~sensor);
+	if (ret)
+		goto out_unlock;
+
+	*watermark = 0;
+	ret = inv_icm42600_buffer_update_watermark(st);
+	if (ret)
+		goto out_unlock;
+
+	conf.mode = INV_ICM42600_SENSOR_MODE_OFF;
+	if (sensor == INV_ICM42600_SENSOR_GYRO)
+		ret = inv_icm42600_set_gyro_conf(st, &conf, &sleep_sensor);
+	else
+		ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_sensor);
+	if (ret)
+		goto out_unlock;
+
+	/* if FIFO is off, turn temperature off */
+	if (!st->fifo.on)
+		ret = inv_icm42600_set_temp_conf(st, false, &sleep_temp);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+
+	/* sleep maximum required time */
+	if (sleep_sensor > sleep_temp)
+		sleep = sleep_sensor;
+	else
+		sleep = sleep_temp;
+	if (sleep)
+		msleep(sleep);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+const struct iio_buffer_setup_ops inv_icm42600_buffer_ops = {
+	.preenable = inv_icm42600_buffer_preenable,
+	.postenable = inv_icm42600_buffer_postenable,
+	.predisable = inv_icm42600_buffer_predisable,
+	.postdisable = inv_icm42600_buffer_postdisable,
+};
+
+int inv_icm42600_buffer_fifo_read(struct inv_icm42600_state *st,
+				  unsigned int max)
+{
+	size_t max_count;
+	__be16 *raw_fifo_count;
+	ssize_t i, size;
+	const void *accel, *gyro, *timestamp;
+	const int8_t *temp;
+	unsigned int odr;
+	int ret;
+
+	/* reset all samples counters */
+	st->fifo.count = 0;
+	st->fifo.nb.gyro = 0;
+	st->fifo.nb.accel = 0;
+	st->fifo.nb.total = 0;
+
+	/* compute maximum FIFO read size */
+	if (max == 0)
+		max_count = sizeof(st->fifo.data);
+	else
+		max_count = max * inv_icm42600_get_packet_size(st->fifo.en);
+
+	/* read FIFO count value */
+	raw_fifo_count = (__be16 *)st->buffer;
+	ret = regmap_bulk_read(st->map, INV_ICM42600_REG_FIFO_COUNT,
+			       raw_fifo_count, sizeof(*raw_fifo_count));
+	if (ret)
+		return ret;
+	st->fifo.count = be16_to_cpup(raw_fifo_count);
+
+	/* check and clamp FIFO count value */
+	if (st->fifo.count == 0)
+		return 0;
+	if (st->fifo.count > max_count)
+		st->fifo.count = max_count;
+
+	/* read all FIFO data in internal buffer */
+	ret = regmap_noinc_read(st->map, INV_ICM42600_REG_FIFO_DATA,
+				st->fifo.data, st->fifo.count);
+	if (ret)
+		return ret;
+
+	/* compute number of samples for each sensor */
+	for (i = 0; i < st->fifo.count; i += size) {
+		size = inv_icm42600_fifo_decode_packet(&st->fifo.data[i],
+				&accel, &gyro, &temp, &timestamp, &odr);
+		if (size <= 0)
+			break;
+		if (gyro != NULL && inv_icm42600_fifo_is_data_valid(gyro))
+			st->fifo.nb.gyro++;
+		if (accel != NULL && inv_icm42600_fifo_is_data_valid(accel))
+			st->fifo.nb.accel++;
+		st->fifo.nb.total++;
+	}
+
+	return 0;
+}
+
+int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st)
+{
+	struct inv_sensors_timestamp *ts;
+	int ret;
+
+	if (st->fifo.nb.total == 0)
+		return 0;
+
+	/* handle gyroscope timestamp and FIFO data parsing */
+	ts = iio_priv(st->indio_gyro);
+	inv_sensors_timestamp_interrupt(ts, st->fifo.period, st->fifo.nb.total,
+					st->fifo.nb.gyro, st->timestamp.gyro);
+	if (st->fifo.nb.gyro > 0) {
+		ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro);
+		if (ret)
+			return ret;
+	}
+
+	/* handle accelerometer timestamp and FIFO data parsing */
+	ts = iio_priv(st->indio_accel);
+	inv_sensors_timestamp_interrupt(ts, st->fifo.period, st->fifo.nb.total,
+					st->fifo.nb.accel, st->timestamp.accel);
+	if (st->fifo.nb.accel > 0) {
+		ret = inv_icm42600_accel_parse_fifo(st->indio_accel);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int inv_icm42600_buffer_hwfifo_flush(struct inv_icm42600_state *st,
+				     unsigned int count)
+{
+	struct inv_sensors_timestamp *ts;
+	int64_t gyro_ts, accel_ts;
+	int ret;
+
+	gyro_ts = iio_get_time_ns(st->indio_gyro);
+	accel_ts = iio_get_time_ns(st->indio_accel);
+
+	ret = inv_icm42600_buffer_fifo_read(st, count);
+	if (ret)
+		return ret;
+
+	if (st->fifo.nb.total == 0)
+		return 0;
+
+	if (st->fifo.nb.gyro > 0) {
+		ts = iio_priv(st->indio_gyro);
+		inv_sensors_timestamp_interrupt(ts, st->fifo.period,
+						st->fifo.nb.total, st->fifo.nb.gyro,
+						gyro_ts);
+		ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro);
+		if (ret)
+			return ret;
+	}
+
+	if (st->fifo.nb.accel > 0) {
+		ts = iio_priv(st->indio_accel);
+		inv_sensors_timestamp_interrupt(ts, st->fifo.period,
+						st->fifo.nb.total, st->fifo.nb.accel,
+						accel_ts);
+		ret = inv_icm42600_accel_parse_fifo(st->indio_accel);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int inv_icm42600_buffer_init(struct inv_icm42600_state *st)
+{
+	unsigned int val;
+	int ret;
+
+	/*
+	 * Default FIFO configuration (bits 7 to 5)
+	 * - use invalid value
+	 * - FIFO count in bytes
+	 * - FIFO count in big endian
+	 */
+	val = INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_ENDIAN;
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
+				 GENMASK(7, 5), val);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable FIFO partial read and continuous watermark interrupt.
+	 * Disable all FIFO EN bits.
+	 */
+	val = INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD |
+	      INV_ICM42600_FIFO_CONFIG1_WM_GT_TH;
+	return regmap_update_bits(st->map, INV_ICM42600_REG_FIFO_CONFIG1,
+				  GENMASK(6, 5) | GENMASK(3, 0), val);
+}
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h
new file mode 100644
index 0000000000..8b85ee333b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#ifndef INV_ICM42600_BUFFER_H_
+#define INV_ICM42600_BUFFER_H_
+
+#include <linux/kernel.h>
+#include <linux/bits.h>
+
+struct inv_icm42600_state;
+
+#define INV_ICM42600_SENSOR_GYRO	BIT(0)
+#define INV_ICM42600_SENSOR_ACCEL	BIT(1)
+#define INV_ICM42600_SENSOR_TEMP	BIT(2)
+
+/**
+ * struct inv_icm42600_fifo - FIFO state variables
+ * @on:		reference counter for FIFO on.
+ * @en:		bits field of INV_ICM42600_SENSOR_* for FIFO EN bits.
+ * @period:	FIFO internal period.
+ * @watermark:	watermark configuration values for accel and gyro.
+ * @count:	number of bytes in the FIFO data buffer.
+ * @nb:		gyro, accel and total samples in the FIFO data buffer.
+ * @data:	FIFO data buffer aligned for DMA (2kB + 32 bytes of read cache).
+ */
+struct inv_icm42600_fifo {
+	unsigned int on;
+	unsigned int en;
+	uint32_t period;
+	struct {
+		unsigned int gyro;
+		unsigned int accel;
+	} watermark;
+	size_t count;
+	struct {
+		size_t gyro;
+		size_t accel;
+		size_t total;
+	} nb;
+	uint8_t data[2080] __aligned(IIO_DMA_MINALIGN);
+};
+
+/* FIFO data packet */
+struct inv_icm42600_fifo_sensor_data {
+	__be16 x;
+	__be16 y;
+	__be16 z;
+} __packed;
+#define INV_ICM42600_FIFO_DATA_INVALID		-32768
+
+static inline int16_t inv_icm42600_fifo_get_sensor_data(__be16 d)
+{
+	return be16_to_cpu(d);
+}
+
+static inline bool
+inv_icm42600_fifo_is_data_valid(const struct inv_icm42600_fifo_sensor_data *s)
+{
+	int16_t x, y, z;
+
+	x = inv_icm42600_fifo_get_sensor_data(s->x);
+	y = inv_icm42600_fifo_get_sensor_data(s->y);
+	z = inv_icm42600_fifo_get_sensor_data(s->z);
+
+	if (x == INV_ICM42600_FIFO_DATA_INVALID &&
+	    y == INV_ICM42600_FIFO_DATA_INVALID &&
+	    z == INV_ICM42600_FIFO_DATA_INVALID)
+		return false;
+
+	return true;
+}
+
+ssize_t inv_icm42600_fifo_decode_packet(const void *packet, const void **accel,
+					const void **gyro, const int8_t **temp,
+					const void **timestamp, unsigned int *odr);
+
+extern const struct iio_buffer_setup_ops inv_icm42600_buffer_ops;
+
+int inv_icm42600_buffer_init(struct inv_icm42600_state *st);
+
+void inv_icm42600_buffer_update_fifo_period(struct inv_icm42600_state *st);
+
+int inv_icm42600_buffer_set_fifo_en(struct inv_icm42600_state *st,
+				    unsigned int fifo_en);
+
+int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st);
+
+int inv_icm42600_buffer_fifo_read(struct inv_icm42600_state *st,
+				  unsigned int max);
+
+int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st);
+
+int inv_icm42600_buffer_hwfifo_flush(struct inv_icm42600_state *st,
+				     unsigned int count);
+
+#endif
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
new file mode 100644
index 0000000000..a5e81906e3
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include "inv_icm42600.h"
+#include "inv_icm42600_buffer.h"
+
+static const struct regmap_range_cfg inv_icm42600_regmap_ranges[] = {
+	{
+		.name = "user banks",
+		.range_min = 0x0000,
+		.range_max = 0x4FFF,
+		.selector_reg = INV_ICM42600_REG_BANK_SEL,
+		.selector_mask = INV_ICM42600_BANK_SEL_MASK,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x1000,
+	},
+};
+
+const struct regmap_config inv_icm42600_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x4FFF,
+	.ranges = inv_icm42600_regmap_ranges,
+	.num_ranges = ARRAY_SIZE(inv_icm42600_regmap_ranges),
+};
+EXPORT_SYMBOL_NS_GPL(inv_icm42600_regmap_config, IIO_ICM42600);
+
+struct inv_icm42600_hw {
+	uint8_t whoami;
+	const char *name;
+	const struct inv_icm42600_conf *conf;
+};
+
+/* chip initial default configuration */
+static const struct inv_icm42600_conf inv_icm42600_default_conf = {
+	.gyro = {
+		.mode = INV_ICM42600_SENSOR_MODE_OFF,
+		.fs = INV_ICM42600_GYRO_FS_2000DPS,
+		.odr = INV_ICM42600_ODR_50HZ,
+		.filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,
+	},
+	.accel = {
+		.mode = INV_ICM42600_SENSOR_MODE_OFF,
+		.fs = INV_ICM42600_ACCEL_FS_16G,
+		.odr = INV_ICM42600_ODR_50HZ,
+		.filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,
+	},
+	.temp_en = false,
+};
+
+static const struct inv_icm42600_hw inv_icm42600_hw[INV_CHIP_NB] = {
+	[INV_CHIP_ICM42600] = {
+		.whoami = INV_ICM42600_WHOAMI_ICM42600,
+		.name = "icm42600",
+		.conf = &inv_icm42600_default_conf,
+	},
+	[INV_CHIP_ICM42602] = {
+		.whoami = INV_ICM42600_WHOAMI_ICM42602,
+		.name = "icm42602",
+		.conf = &inv_icm42600_default_conf,
+	},
+	[INV_CHIP_ICM42605] = {
+		.whoami = INV_ICM42600_WHOAMI_ICM42605,
+		.name = "icm42605",
+		.conf = &inv_icm42600_default_conf,
+	},
+	[INV_CHIP_ICM42622] = {
+		.whoami = INV_ICM42600_WHOAMI_ICM42622,
+		.name = "icm42622",
+		.conf = &inv_icm42600_default_conf,
+	},
+	[INV_CHIP_ICM42631] = {
+		.whoami = INV_ICM42600_WHOAMI_ICM42631,
+		.name = "icm42631",
+		.conf = &inv_icm42600_default_conf,
+	},
+};
+
+const struct iio_mount_matrix *
+inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan)
+{
+	const struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+
+	return &st->orientation;
+}
+
+uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr)
+{
+	static uint32_t odr_periods[INV_ICM42600_ODR_NB] = {
+		/* reserved values */
+		0, 0, 0,
+		/* 8kHz */
+		125000,
+		/* 4kHz */
+		250000,
+		/* 2kHz */
+		500000,
+		/* 1kHz */
+		1000000,
+		/* 200Hz */
+		5000000,
+		/* 100Hz */
+		10000000,
+		/* 50Hz */
+		20000000,
+		/* 25Hz */
+		40000000,
+		/* 12.5Hz */
+		80000000,
+		/* 6.25Hz */
+		160000000,
+		/* 3.125Hz */
+		320000000,
+		/* 1.5625Hz */
+		640000000,
+		/* 500Hz */
+		2000000,
+	};
+
+	return odr_periods[odr];
+}
+
+static int inv_icm42600_set_pwr_mgmt0(struct inv_icm42600_state *st,
+				      enum inv_icm42600_sensor_mode gyro,
+				      enum inv_icm42600_sensor_mode accel,
+				      bool temp, unsigned int *sleep_ms)
+{
+	enum inv_icm42600_sensor_mode oldgyro = st->conf.gyro.mode;
+	enum inv_icm42600_sensor_mode oldaccel = st->conf.accel.mode;
+	bool oldtemp = st->conf.temp_en;
+	unsigned int sleepval;
+	unsigned int val;
+	int ret;
+
+	/* if nothing changed, exit */
+	if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+		return 0;
+
+	val = INV_ICM42600_PWR_MGMT0_GYRO(gyro) |
+	      INV_ICM42600_PWR_MGMT0_ACCEL(accel);
+	if (!temp)
+		val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;
+	ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);
+	if (ret)
+		return ret;
+
+	st->conf.gyro.mode = gyro;
+	st->conf.accel.mode = accel;
+	st->conf.temp_en = temp;
+
+	/* compute required wait time for sensors to stabilize */
+	sleepval = 0;
+	/* temperature stabilization time */
+	if (temp && !oldtemp) {
+		if (sleepval < INV_ICM42600_TEMP_STARTUP_TIME_MS)
+			sleepval = INV_ICM42600_TEMP_STARTUP_TIME_MS;
+	}
+	/* accel startup time */
+	if (accel != oldaccel && oldaccel == INV_ICM42600_SENSOR_MODE_OFF) {
+		/* block any register write for at least 200 µs */
+		usleep_range(200, 300);
+		if (sleepval < INV_ICM42600_ACCEL_STARTUP_TIME_MS)
+			sleepval = INV_ICM42600_ACCEL_STARTUP_TIME_MS;
+	}
+	if (gyro != oldgyro) {
+		/* gyro startup time */
+		if (oldgyro == INV_ICM42600_SENSOR_MODE_OFF) {
+			/* block any register write for at least 200 µs */
+			usleep_range(200, 300);
+			if (sleepval < INV_ICM42600_GYRO_STARTUP_TIME_MS)
+				sleepval = INV_ICM42600_GYRO_STARTUP_TIME_MS;
+		/* gyro stop time */
+		} else if (gyro == INV_ICM42600_SENSOR_MODE_OFF) {
+			if (sleepval < INV_ICM42600_GYRO_STOP_TIME_MS)
+				sleepval =  INV_ICM42600_GYRO_STOP_TIME_MS;
+		}
+	}
+
+	/* deferred sleep value if sleep pointer is provided or direct sleep */
+	if (sleep_ms)
+		*sleep_ms = sleepval;
+	else if (sleepval)
+		msleep(sleepval);
+
+	return 0;
+}
+
+int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,
+				struct inv_icm42600_sensor_conf *conf,
+				unsigned int *sleep_ms)
+{
+	struct inv_icm42600_sensor_conf *oldconf = &st->conf.accel;
+	unsigned int val;
+	int ret;
+
+	/* Sanitize missing values with current values */
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	/* set ACCEL_CONFIG0 register (accel fullscale & odr) */
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->fs) |
+		      INV_ICM42600_ACCEL_CONFIG0_ODR(conf->odr);
+		ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	/* set GYRO_ACCEL_CONFIG0 register (accel filter) */
+	if (conf->filter != oldconf->filter) {
+		val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->filter) |
+		      INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(st->conf.gyro.filter);
+		ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	/* set PWR_MGMT0 register (accel sensor mode) */
+	return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode, conf->mode,
+					  st->conf.temp_en, sleep_ms);
+}
+
+int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,
+			       struct inv_icm42600_sensor_conf *conf,
+			       unsigned int *sleep_ms)
+{
+	struct inv_icm42600_sensor_conf *oldconf = &st->conf.gyro;
+	unsigned int val;
+	int ret;
+
+	/* sanitize missing values with current values */
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	/* set GYRO_CONFIG0 register (gyro fullscale & odr) */
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = INV_ICM42600_GYRO_CONFIG0_FS(conf->fs) |
+		      INV_ICM42600_GYRO_CONFIG0_ODR(conf->odr);
+		ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	/* set GYRO_ACCEL_CONFIG0 register (gyro filter) */
+	if (conf->filter != oldconf->filter) {
+		val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(st->conf.accel.filter) |
+		      INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->filter);
+		ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	/* set PWR_MGMT0 register (gyro sensor mode) */
+	return inv_icm42600_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+					  st->conf.temp_en, sleep_ms);
+
+	return 0;
+}
+
+int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
+			       unsigned int *sleep_ms)
+{
+	return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode,
+					  st->conf.accel.mode, enable,
+					  sleep_ms);
+}
+
+int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
+			     unsigned int writeval, unsigned int *readval)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (readval)
+		ret = regmap_read(st->map, reg, readval);
+	else
+		ret = regmap_write(st->map, reg, writeval);
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int inv_icm42600_set_conf(struct inv_icm42600_state *st,
+				 const struct inv_icm42600_conf *conf)
+{
+	unsigned int val;
+	int ret;
+
+	/* set PWR_MGMT0 register (gyro & accel sensor mode, temp enabled) */
+	val = INV_ICM42600_PWR_MGMT0_GYRO(conf->gyro.mode) |
+	      INV_ICM42600_PWR_MGMT0_ACCEL(conf->accel.mode);
+	if (!conf->temp_en)
+		val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;
+	ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);
+	if (ret)
+		return ret;
+
+	/* set GYRO_CONFIG0 register (gyro fullscale & odr) */
+	val = INV_ICM42600_GYRO_CONFIG0_FS(conf->gyro.fs) |
+	      INV_ICM42600_GYRO_CONFIG0_ODR(conf->gyro.odr);
+	ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);
+	if (ret)
+		return ret;
+
+	/* set ACCEL_CONFIG0 register (accel fullscale & odr) */
+	val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->accel.fs) |
+	      INV_ICM42600_ACCEL_CONFIG0_ODR(conf->accel.odr);
+	ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);
+	if (ret)
+		return ret;
+
+	/* set GYRO_ACCEL_CONFIG0 register (gyro & accel filters) */
+	val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->accel.filter) |
+	      INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->gyro.filter);
+	ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+	if (ret)
+		return ret;
+
+	/* update internal conf */
+	st->conf = *conf;
+
+	return 0;
+}
+
+/**
+ *  inv_icm42600_setup() - check and setup chip
+ *  @st:	driver internal state
+ *  @bus_setup:	callback for setting up bus specific registers
+ *
+ *  Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_icm42600_setup(struct inv_icm42600_state *st,
+			      inv_icm42600_bus_setup bus_setup)
+{
+	const struct inv_icm42600_hw *hw = &inv_icm42600_hw[st->chip];
+	const struct device *dev = regmap_get_device(st->map);
+	unsigned int val;
+	int ret;
+
+	/* check chip self-identification value */
+	ret = regmap_read(st->map, INV_ICM42600_REG_WHOAMI, &val);
+	if (ret)
+		return ret;
+	if (val != hw->whoami) {
+		dev_err(dev, "invalid whoami %#02x expected %#02x (%s)\n",
+			val, hw->whoami, hw->name);
+		return -ENODEV;
+	}
+	st->name = hw->name;
+
+	/* reset to make sure previous state are not there */
+	ret = regmap_write(st->map, INV_ICM42600_REG_DEVICE_CONFIG,
+			   INV_ICM42600_DEVICE_CONFIG_SOFT_RESET);
+	if (ret)
+		return ret;
+	msleep(INV_ICM42600_RESET_TIME_MS);
+
+	ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &val);
+	if (ret)
+		return ret;
+	if (!(val & INV_ICM42600_INT_STATUS_RESET_DONE)) {
+		dev_err(dev, "reset error, reset done bit not set\n");
+		return -ENODEV;
+	}
+
+	/* set chip bus configuration */
+	ret = bus_setup(st);
+	if (ret)
+		return ret;
+
+	/* sensor data in big-endian (default) */
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
+				 INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN,
+				 INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN);
+	if (ret)
+		return ret;
+
+	return inv_icm42600_set_conf(st, hw->conf);
+}
+
+static irqreturn_t inv_icm42600_irq_timestamp(int irq, void *_data)
+{
+	struct inv_icm42600_state *st = _data;
+
+	st->timestamp.gyro = iio_get_time_ns(st->indio_gyro);
+	st->timestamp.accel = iio_get_time_ns(st->indio_accel);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t inv_icm42600_irq_handler(int irq, void *_data)
+{
+	struct inv_icm42600_state *st = _data;
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int status;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &status);
+	if (ret)
+		goto out_unlock;
+
+	/* FIFO full */
+	if (status & INV_ICM42600_INT_STATUS_FIFO_FULL)
+		dev_warn(dev, "FIFO full data lost!\n");
+
+	/* FIFO threshold reached */
+	if (status & INV_ICM42600_INT_STATUS_FIFO_THS) {
+		ret = inv_icm42600_buffer_fifo_read(st, 0);
+		if (ret) {
+			dev_err(dev, "FIFO read error %d\n", ret);
+			goto out_unlock;
+		}
+		ret = inv_icm42600_buffer_fifo_parse(st);
+		if (ret)
+			dev_err(dev, "FIFO parsing error %d\n", ret);
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * inv_icm42600_irq_init() - initialize int pin and interrupt handler
+ * @st:		driver internal state
+ * @irq:	irq number
+ * @irq_type:	irq trigger type
+ * @open_drain:	true if irq is open drain, false for push-pull
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_icm42600_irq_init(struct inv_icm42600_state *st, int irq,
+				 int irq_type, bool open_drain)
+{
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int val;
+	int ret;
+
+	/* configure INT1 interrupt: default is active low on edge */
+	switch (irq_type) {
+	case IRQF_TRIGGER_RISING:
+	case IRQF_TRIGGER_HIGH:
+		val = INV_ICM42600_INT_CONFIG_INT1_ACTIVE_HIGH;
+		break;
+	default:
+		val = INV_ICM42600_INT_CONFIG_INT1_ACTIVE_LOW;
+		break;
+	}
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_HIGH:
+		val |= INV_ICM42600_INT_CONFIG_INT1_LATCHED;
+		break;
+	default:
+		break;
+	}
+
+	if (!open_drain)
+		val |= INV_ICM42600_INT_CONFIG_INT1_PUSH_PULL;
+
+	ret = regmap_write(st->map, INV_ICM42600_REG_INT_CONFIG, val);
+	if (ret)
+		return ret;
+
+	/* Deassert async reset for proper INT pin operation (cf datasheet) */
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_CONFIG1,
+				 INV_ICM42600_INT_CONFIG1_ASYNC_RESET, 0);
+	if (ret)
+		return ret;
+
+	return devm_request_threaded_irq(dev, irq, inv_icm42600_irq_timestamp,
+					 inv_icm42600_irq_handler, irq_type,
+					 "inv_icm42600", st);
+}
+
+static int inv_icm42600_timestamp_setup(struct inv_icm42600_state *st)
+{
+	unsigned int val;
+
+	/* enable timestamp register */
+	val = INV_ICM42600_TMST_CONFIG_TMST_TO_REGS_EN |
+	      INV_ICM42600_TMST_CONFIG_TMST_EN;
+	return regmap_update_bits(st->map, INV_ICM42600_REG_TMST_CONFIG,
+				  INV_ICM42600_TMST_CONFIG_MASK, val);
+}
+
+static int inv_icm42600_enable_regulator_vddio(struct inv_icm42600_state *st)
+{
+	int ret;
+
+	ret = regulator_enable(st->vddio_supply);
+	if (ret)
+		return ret;
+
+	/* wait a little for supply ramp */
+	usleep_range(3000, 4000);
+
+	return 0;
+}
+
+static void inv_icm42600_disable_vdd_reg(void *_data)
+{
+	struct inv_icm42600_state *st = _data;
+	const struct device *dev = regmap_get_device(st->map);
+	int ret;
+
+	ret = regulator_disable(st->vdd_supply);
+	if (ret)
+		dev_err(dev, "failed to disable vdd error %d\n", ret);
+}
+
+static void inv_icm42600_disable_vddio_reg(void *_data)
+{
+	struct inv_icm42600_state *st = _data;
+	const struct device *dev = regmap_get_device(st->map);
+	int ret;
+
+	ret = regulator_disable(st->vddio_supply);
+	if (ret)
+		dev_err(dev, "failed to disable vddio error %d\n", ret);
+}
+
+static void inv_icm42600_disable_pm(void *_data)
+{
+	struct device *dev = _data;
+
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+}
+
+int inv_icm42600_core_probe(struct regmap *regmap, int chip, int irq,
+			    inv_icm42600_bus_setup bus_setup)
+{
+	struct device *dev = regmap_get_device(regmap);
+	struct inv_icm42600_state *st;
+	struct irq_data *irq_desc;
+	int irq_type;
+	bool open_drain;
+	int ret;
+
+	if (chip <= INV_CHIP_INVALID || chip >= INV_CHIP_NB) {
+		dev_err(dev, "invalid chip = %d\n", chip);
+		return -ENODEV;
+	}
+
+	/* get irq properties, set trigger falling by default */
+	irq_desc = irq_get_irq_data(irq);
+	if (!irq_desc) {
+		dev_err(dev, "could not find IRQ %d\n", irq);
+		return -EINVAL;
+	}
+
+	irq_type = irqd_get_trigger_type(irq_desc);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_FALLING;
+
+	open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, st);
+	mutex_init(&st->lock);
+	st->chip = chip;
+	st->map = regmap;
+
+	ret = iio_read_mount_matrix(dev, &st->orientation);
+	if (ret) {
+		dev_err(dev, "failed to retrieve mounting matrix %d\n", ret);
+		return ret;
+	}
+
+	st->vdd_supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(st->vdd_supply))
+		return PTR_ERR(st->vdd_supply);
+
+	st->vddio_supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(st->vddio_supply))
+		return PTR_ERR(st->vddio_supply);
+
+	ret = regulator_enable(st->vdd_supply);
+	if (ret)
+		return ret;
+	msleep(INV_ICM42600_POWER_UP_TIME_MS);
+
+	ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vdd_reg, st);
+	if (ret)
+		return ret;
+
+	ret = inv_icm42600_enable_regulator_vddio(st);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vddio_reg, st);
+	if (ret)
+		return ret;
+
+	/* setup chip registers */
+	ret = inv_icm42600_setup(st, bus_setup);
+	if (ret)
+		return ret;
+
+	ret = inv_icm42600_timestamp_setup(st);
+	if (ret)
+		return ret;
+
+	ret = inv_icm42600_buffer_init(st);
+	if (ret)
+		return ret;
+
+	st->indio_gyro = inv_icm42600_gyro_init(st);
+	if (IS_ERR(st->indio_gyro))
+		return PTR_ERR(st->indio_gyro);
+
+	st->indio_accel = inv_icm42600_accel_init(st);
+	if (IS_ERR(st->indio_accel))
+		return PTR_ERR(st->indio_accel);
+
+	ret = inv_icm42600_irq_init(st, irq, irq_type, open_drain);
+	if (ret)
+		return ret;
+
+	/* setup runtime power management */
+	ret = pm_runtime_set_active(dev);
+	if (ret)
+		return ret;
+	pm_runtime_get_noresume(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put(dev);
+
+	return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+}
+EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, IIO_ICM42600);
+
+/*
+ * Suspend saves sensors state and turns everything off.
+ * Check first if runtime suspend has not already done the job.
+ */
+static int inv_icm42600_suspend(struct device *dev)
+{
+	struct inv_icm42600_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	st->suspended.gyro = st->conf.gyro.mode;
+	st->suspended.accel = st->conf.accel.mode;
+	st->suspended.temp = st->conf.temp_en;
+	if (pm_runtime_suspended(dev)) {
+		ret = 0;
+		goto out_unlock;
+	}
+
+	/* disable FIFO data streaming */
+	if (st->fifo.on) {
+		ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG,
+				   INV_ICM42600_FIFO_CONFIG_BYPASS);
+		if (ret)
+			goto out_unlock;
+	}
+
+	ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
+					 INV_ICM42600_SENSOR_MODE_OFF, false,
+					 NULL);
+	if (ret)
+		goto out_unlock;
+
+	regulator_disable(st->vddio_supply);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+/*
+ * System resume gets the system back on and restores the sensors state.
+ * Manually put runtime power management in system active state.
+ */
+static int inv_icm42600_resume(struct device *dev)
+{
+	struct inv_icm42600_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_enable_regulator_vddio(st);
+	if (ret)
+		goto out_unlock;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	/* restore sensors state */
+	ret = inv_icm42600_set_pwr_mgmt0(st, st->suspended.gyro,
+					 st->suspended.accel,
+					 st->suspended.temp, NULL);
+	if (ret)
+		goto out_unlock;
+
+	/* restore FIFO data streaming */
+	if (st->fifo.on)
+		ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG,
+				   INV_ICM42600_FIFO_CONFIG_STREAM);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+/* Runtime suspend will turn off sensors that are enabled by iio devices. */
+static int inv_icm42600_runtime_suspend(struct device *dev)
+{
+	struct inv_icm42600_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	/* disable all sensors */
+	ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
+					 INV_ICM42600_SENSOR_MODE_OFF, false,
+					 NULL);
+	if (ret)
+		goto error_unlock;
+
+	regulator_disable(st->vddio_supply);
+
+error_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+/* Sensors are enabled by iio devices, no need to turn them back on here. */
+static int inv_icm42600_runtime_resume(struct device *dev)
+{
+	struct inv_icm42600_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_enable_regulator_vddio(st);
+
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42600_pm_ops, IIO_ICM42600) = {
+	SYSTEM_SLEEP_PM_OPS(inv_icm42600_suspend, inv_icm42600_resume)
+	RUNTIME_PM_OPS(inv_icm42600_runtime_suspend,
+		       inv_icm42600_runtime_resume, NULL)
+};
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-426xx device driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_INV_SENSORS_TIMESTAMP);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
new file mode 100644
index 0000000000..3bf946e56e
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/math64.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+
+#include "inv_icm42600.h"
+#include "inv_icm42600_temp.h"
+#include "inv_icm42600_buffer.h"
+
+#define INV_ICM42600_GYRO_CHAN(_modifier, _index, _ext_info)		\
+	{								\
+		.type = IIO_ANGL_VEL,					\
+		.modified = 1,						\
+		.channel2 = _modifier,					\
+		.info_mask_separate =					\
+			BIT(IIO_CHAN_INFO_RAW) |			\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_type =				\
+			BIT(IIO_CHAN_INFO_SCALE),			\
+		.info_mask_shared_by_type_available =			\
+			BIT(IIO_CHAN_INFO_SCALE) |			\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_all =				\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.info_mask_shared_by_all_available =			\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.scan_index = _index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+			.endianness = IIO_BE,				\
+		},							\
+		.ext_info = _ext_info,					\
+	}
+
+enum inv_icm42600_gyro_scan {
+	INV_ICM42600_GYRO_SCAN_X,
+	INV_ICM42600_GYRO_SCAN_Y,
+	INV_ICM42600_GYRO_SCAN_Z,
+	INV_ICM42600_GYRO_SCAN_TEMP,
+	INV_ICM42600_GYRO_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42600_gyro_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42600_get_mount_matrix),
+	{},
+};
+
+static const struct iio_chan_spec inv_icm42600_gyro_channels[] = {
+	INV_ICM42600_GYRO_CHAN(IIO_MOD_X, INV_ICM42600_GYRO_SCAN_X,
+			       inv_icm42600_gyro_ext_infos),
+	INV_ICM42600_GYRO_CHAN(IIO_MOD_Y, INV_ICM42600_GYRO_SCAN_Y,
+			       inv_icm42600_gyro_ext_infos),
+	INV_ICM42600_GYRO_CHAN(IIO_MOD_Z, INV_ICM42600_GYRO_SCAN_Z,
+			       inv_icm42600_gyro_ext_infos),
+	INV_ICM42600_TEMP_CHAN(INV_ICM42600_GYRO_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42600_GYRO_SCAN_TIMESTAMP),
+};
+
+/*
+ * IIO buffer data: size must be a power of 2 and timestamp aligned
+ * 16 bytes: 6 bytes angular velocity, 2 bytes temperature, 8 bytes timestamp
+ */
+struct inv_icm42600_gyro_buffer {
+	struct inv_icm42600_fifo_sensor_data gyro;
+	int16_t temp;
+	int64_t timestamp __aligned(8);
+};
+
+#define INV_ICM42600_SCAN_MASK_GYRO_3AXIS				\
+	(BIT(INV_ICM42600_GYRO_SCAN_X) |				\
+	BIT(INV_ICM42600_GYRO_SCAN_Y) |					\
+	BIT(INV_ICM42600_GYRO_SCAN_Z))
+
+#define INV_ICM42600_SCAN_MASK_TEMP	BIT(INV_ICM42600_GYRO_SCAN_TEMP)
+
+static const unsigned long inv_icm42600_gyro_scan_masks[] = {
+	/* 3-axis gyro + temperature */
+	INV_ICM42600_SCAN_MASK_GYRO_3AXIS | INV_ICM42600_SCAN_MASK_TEMP,
+	0,
+};
+
+/* enable gyroscope sensor and FIFO write */
+static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev,
+					      const unsigned long *scan_mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int fifo_en = 0;
+	unsigned int sleep_gyro = 0;
+	unsigned int sleep_temp = 0;
+	unsigned int sleep;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42600_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42600_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+		fifo_en |= INV_ICM42600_SENSOR_TEMP;
+	}
+
+	if (*scan_mask & INV_ICM42600_SCAN_MASK_GYRO_3AXIS) {
+		/* enable gyro sensor */
+		conf.mode = INV_ICM42600_SENSOR_MODE_LOW_NOISE;
+		ret = inv_icm42600_set_gyro_conf(st, &conf, &sleep_gyro);
+		if (ret)
+			goto out_unlock;
+		fifo_en |= INV_ICM42600_SENSOR_GYRO;
+	}
+
+	/* update data FIFO write */
+	inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
+	ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
+	if (ret)
+		goto out_unlock;
+
+	ret = inv_icm42600_buffer_update_watermark(st);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/* sleep maximum required time */
+	if (sleep_gyro > sleep_temp)
+		sleep = sleep_gyro;
+	else
+		sleep = sleep_temp;
+	if (sleep)
+		msleep(sleep);
+	return ret;
+}
+
+static int inv_icm42600_gyro_read_sensor(struct inv_icm42600_state *st,
+					 struct iio_chan_spec const *chan,
+					 int16_t *val)
+{
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_GYRO_DATA_X;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_GYRO_DATA_Y;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_GYRO_DATA_Z;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	/* enable gyro sensor */
+	conf.mode = INV_ICM42600_SENSOR_MODE_LOW_NOISE;
+	ret = inv_icm42600_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		goto exit;
+
+	/* read gyro register data */
+	data = (__be16 *)&st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		goto exit;
+
+	*val = (int16_t)be16_to_cpup(data);
+	if (*val == INV_ICM42600_DATA_INVALID)
+		ret = -EINVAL;
+exit:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+/* IIO format int + nano */
+static const int inv_icm42600_gyro_scale[] = {
+	/* +/- 2000dps => 0.001065264 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_2000DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_2000DPS + 1] = 1065264,
+	/* +/- 1000dps => 0.000532632 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_1000DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_1000DPS + 1] = 532632,
+	/* +/- 500dps => 0.000266316 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_500DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_500DPS + 1] = 266316,
+	/* +/- 250dps => 0.000133158 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_250DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_250DPS + 1] = 133158,
+	/* +/- 125dps => 0.000066579 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_125DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_125DPS + 1] = 66579,
+	/* +/- 62.5dps => 0.000033290 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_62_5DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_62_5DPS + 1] = 33290,
+	/* +/- 31.25dps => 0.000016645 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_31_25DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_31_25DPS + 1] = 16645,
+	/* +/- 15.625dps => 0.000008322 rad/s */
+	[2 * INV_ICM42600_GYRO_FS_15_625DPS] = 0,
+	[2 * INV_ICM42600_GYRO_FS_15_625DPS + 1] = 8322,
+};
+
+static int inv_icm42600_gyro_read_scale(struct inv_icm42600_state *st,
+					int *val, int *val2)
+{
+	unsigned int idx;
+
+	idx = st->conf.gyro.fs;
+
+	*val = inv_icm42600_gyro_scale[2 * idx];
+	*val2 = inv_icm42600_gyro_scale[2 * idx + 1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42600_gyro_write_scale(struct inv_icm42600_state *st,
+					 int val, int val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 0; idx < ARRAY_SIZE(inv_icm42600_gyro_scale); idx += 2) {
+		if (val == inv_icm42600_gyro_scale[idx] &&
+		    val2 == inv_icm42600_gyro_scale[idx + 1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42600_gyro_scale))
+		return -EINVAL;
+
+	conf.fs = idx / 2;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_set_gyro_conf(st, &conf, NULL);
+
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+/* IIO format int + micro */
+static const int inv_icm42600_gyro_odr[] = {
+	/* 12.5Hz */
+	12, 500000,
+	/* 25Hz */
+	25, 0,
+	/* 50Hz */
+	50, 0,
+	/* 100Hz */
+	100, 0,
+	/* 200Hz */
+	200, 0,
+	/* 1kHz */
+	1000, 0,
+	/* 2kHz */
+	2000, 0,
+	/* 4kHz */
+	4000, 0,
+};
+
+static const int inv_icm42600_gyro_odr_conv[] = {
+	INV_ICM42600_ODR_12_5HZ,
+	INV_ICM42600_ODR_25HZ,
+	INV_ICM42600_ODR_50HZ,
+	INV_ICM42600_ODR_100HZ,
+	INV_ICM42600_ODR_200HZ,
+	INV_ICM42600_ODR_1KHZ_LN,
+	INV_ICM42600_ODR_2KHZ_LN,
+	INV_ICM42600_ODR_4KHZ_LN,
+};
+
+static int inv_icm42600_gyro_read_odr(struct inv_icm42600_state *st,
+				      int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.gyro.odr;
+
+	for (i = 0; i < ARRAY_SIZE(inv_icm42600_gyro_odr_conv); ++i) {
+		if (inv_icm42600_gyro_odr_conv[i] == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42600_gyro_odr_conv))
+		return -EINVAL;
+
+	*val = inv_icm42600_gyro_odr[2 * i];
+	*val2 = inv_icm42600_gyro_odr[2 * i + 1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42600_gyro_write_odr(struct iio_dev *indio_dev,
+				       int val, int val2)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 0; idx < ARRAY_SIZE(inv_icm42600_gyro_odr); idx += 2) {
+		if (val == inv_icm42600_gyro_odr[idx] &&
+		    val2 == inv_icm42600_gyro_odr[idx + 1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42600_gyro_odr))
+		return -EINVAL;
+
+	conf.odr = inv_icm42600_gyro_odr_conv[idx / 2];
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42600_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		goto out_unlock;
+
+	ret = inv_icm42600_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		goto out_unlock;
+	inv_icm42600_buffer_update_fifo_period(st);
+	inv_icm42600_buffer_update_watermark(st);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+/*
+ * Calibration bias values, IIO range format int + nano.
+ * Value is limited to +/-64dps coded on 12 bits signed. Step is 1/32 dps.
+ */
+static int inv_icm42600_gyro_calibbias[] = {
+	-1, 117010721,		/* min: -1.117010721 rad/s */
+	0, 545415,		/* step: 0.000545415 rad/s */
+	1, 116465306,		/* max: 1.116465306 rad/s */
+};
+
+static int inv_icm42600_gyro_read_offset(struct inv_icm42600_state *st,
+					 struct iio_chan_spec const *chan,
+					 int *val, int *val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	int64_t val64;
+	int32_t bias;
+	unsigned int reg;
+	int16_t offset;
+	uint8_t data[2];
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_OFFSET_USER0;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_OFFSET_USER1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_OFFSET_USER3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = regmap_bulk_read(st->map, reg, st->buffer, sizeof(data));
+	memcpy(data, st->buffer, sizeof(data));
+
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	if (ret)
+		return ret;
+
+	/* 12 bits signed value */
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		offset = sign_extend32(((data[1] & 0x0F) << 8) | data[0], 11);
+		break;
+	case IIO_MOD_Y:
+		offset = sign_extend32(((data[0] & 0xF0) << 4) | data[1], 11);
+		break;
+	case IIO_MOD_Z:
+		offset = sign_extend32(((data[1] & 0x0F) << 8) | data[0], 11);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * convert raw offset to dps then to rad/s
+	 * 12 bits signed raw max 64 to dps: 64 / 2048
+	 * dps to rad: Pi / 180
+	 * result in nano (1000000000)
+	 * (offset * 64 * Pi * 1000000000) / (2048 * 180)
+	 */
+	val64 = (int64_t)offset * 64LL * 3141592653LL;
+	/* for rounding, add + or - divisor (2048 * 180) divided by 2 */
+	if (val64 >= 0)
+		val64 += 2048 * 180 / 2;
+	else
+		val64 -= 2048 * 180 / 2;
+	bias = div_s64(val64, 2048 * 180);
+	*val = bias / 1000000000L;
+	*val2 = bias % 1000000000L;
+
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42600_gyro_write_offset(struct inv_icm42600_state *st,
+					  struct iio_chan_spec const *chan,
+					  int val, int val2)
+{
+	struct device *dev = regmap_get_device(st->map);
+	int64_t val64, min, max;
+	unsigned int reg, regval;
+	int16_t offset;
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42600_REG_OFFSET_USER0;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42600_REG_OFFSET_USER1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42600_REG_OFFSET_USER3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* inv_icm42600_gyro_calibbias: min - step - max in nano */
+	min = (int64_t)inv_icm42600_gyro_calibbias[0] * 1000000000LL +
+	      (int64_t)inv_icm42600_gyro_calibbias[1];
+	max = (int64_t)inv_icm42600_gyro_calibbias[4] * 1000000000LL +
+	      (int64_t)inv_icm42600_gyro_calibbias[5];
+	val64 = (int64_t)val * 1000000000LL + (int64_t)val2;
+	if (val64 < min || val64 > max)
+		return -EINVAL;
+
+	/*
+	 * convert rad/s to dps then to raw value
+	 * rad to dps: 180 / Pi
+	 * dps to raw 12 bits signed, max 64: 2048 / 64
+	 * val in nano (1000000000)
+	 * val * 180 * 2048 / (Pi * 1000000000 * 64)
+	 */
+	val64 = val64 * 180LL * 2048LL;
+	/* for rounding, add + or - divisor (3141592653 * 64) divided by 2 */
+	if (val64 >= 0)
+		val64 += 3141592653LL * 64LL / 2LL;
+	else
+		val64 -= 3141592653LL * 64LL / 2LL;
+	offset = div64_s64(val64, 3141592653LL * 64LL);
+
+	/* clamp value limited to 12 bits signed */
+	if (offset < -2048)
+		offset = -2048;
+	else if (offset > 2047)
+		offset = 2047;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		/* OFFSET_USER1 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER1,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = offset & 0xFF;
+		st->buffer[1] = (regval & 0xF0) | ((offset & 0xF00) >> 8);
+		break;
+	case IIO_MOD_Y:
+		/* OFFSET_USER1 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER1,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = ((offset & 0xF00) >> 4) | (regval & 0x0F);
+		st->buffer[1] = offset & 0xFF;
+		break;
+	case IIO_MOD_Z:
+		/* OFFSET_USER4 register is shared */
+		ret = regmap_read(st->map, INV_ICM42600_REG_OFFSET_USER4,
+				  &regval);
+		if (ret)
+			goto out_unlock;
+		st->buffer[0] = offset & 0xFF;
+		st->buffer[1] = (regval & 0xF0) | ((offset & 0xF00) >> 8);
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ret = regmap_bulk_write(st->map, reg, st->buffer, 2);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+static int inv_icm42600_gyro_read_raw(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      int *val, int *val2, long mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int16_t data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42600_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_gyro_read_sensor(st, chan, &data);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42600_gyro_read_scale(st, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42600_gyro_read_odr(st, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return inv_icm42600_gyro_read_offset(st, chan, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_gyro_read_avail(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					const int **vals,
+					int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = inv_icm42600_gyro_scale;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42600_gyro_scale);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = inv_icm42600_gyro_odr;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(inv_icm42600_gyro_odr);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*vals = inv_icm42600_gyro_calibbias;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		return IIO_AVAIL_RANGE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_gyro_write_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int val, int val2, long mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_gyro_write_scale(st, val, val2);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42600_gyro_write_odr(indio_dev, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_gyro_write_offset(st, chan, val, val2);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+					       struct iio_chan_spec const *chan,
+					       long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42600_gyro_hwfifo_set_watermark(struct iio_dev *indio_dev,
+						  unsigned int val)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	st->fifo.watermark.gyro = val;
+	ret = inv_icm42600_buffer_update_watermark(st);
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int inv_icm42600_gyro_hwfifo_flush(struct iio_dev *indio_dev,
+					  unsigned int count)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (count == 0)
+		return 0;
+
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_buffer_hwfifo_flush(st, count);
+	if (!ret)
+		ret = st->fifo.nb.gyro;
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_info inv_icm42600_gyro_info = {
+	.read_raw = inv_icm42600_gyro_read_raw,
+	.read_avail = inv_icm42600_gyro_read_avail,
+	.write_raw = inv_icm42600_gyro_write_raw,
+	.write_raw_get_fmt = inv_icm42600_gyro_write_raw_get_fmt,
+	.debugfs_reg_access = inv_icm42600_debugfs_reg,
+	.update_scan_mode = inv_icm42600_gyro_update_scan_mode,
+	.hwfifo_set_watermark = inv_icm42600_gyro_hwfifo_set_watermark,
+	.hwfifo_flush_to_buffer = inv_icm42600_gyro_hwfifo_flush,
+};
+
+struct iio_dev *inv_icm42600_gyro_init(struct inv_icm42600_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct inv_sensors_timestamp *ts;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*ts));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42600_odr_to_period(st->conf.accel.odr);
+	ts = iio_priv(indio_dev);
+	inv_sensors_timestamp_init(ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42600_gyro_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42600_gyro_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42600_gyro_channels);
+	indio_dev->available_scan_masks = inv_icm42600_gyro_scan_masks;
+	indio_dev->setup_ops = &inv_icm42600_buffer_ops;
+
+	ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
+					  &inv_icm42600_buffer_ops);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
+
+int inv_icm42600_gyro_parse_fifo(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_sensors_timestamp *ts = iio_priv(indio_dev);
+	ssize_t i, size;
+	unsigned int no;
+	const void *accel, *gyro, *timestamp;
+	const int8_t *temp;
+	unsigned int odr;
+	int64_t ts_val;
+	struct inv_icm42600_gyro_buffer buffer;
+
+	/* parse all fifo packets */
+	for (i = 0, no = 0; i < st->fifo.count; i += size, ++no) {
+		size = inv_icm42600_fifo_decode_packet(&st->fifo.data[i],
+				&accel, &gyro, &temp, &timestamp, &odr);
+		/* quit if error or FIFO is empty */
+		if (size <= 0)
+			return size;
+
+		/* skip packet if no gyro data or data is invalid */
+		if (gyro == NULL || !inv_icm42600_fifo_is_data_valid(gyro))
+			continue;
+
+		/* update odr */
+		if (odr & INV_ICM42600_SENSOR_GYRO)
+			inv_sensors_timestamp_apply_odr(ts, st->fifo.period,
+							st->fifo.nb.total, no);
+
+		/* buffer is copied to userspace, zeroing it to avoid any data leak */
+		memset(&buffer, 0, sizeof(buffer));
+		memcpy(&buffer.gyro, gyro, sizeof(buffer.gyro));
+		/* convert 8 bits FIFO temperature in high resolution format */
+		buffer.temp = temp ? (*temp * 64) : 0;
+		ts_val = inv_sensors_timestamp_pop(ts);
+		iio_push_to_buffers_with_timestamp(indio_dev, &buffer, ts_val);
+	}
+
+	return 0;
+}
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
new file mode 100644
index 0000000000..1af559403b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/property.h>
+
+#include "inv_icm42600.h"
+
+static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
+{
+	unsigned int mask, val;
+	int ret;
+
+	/*
+	 * setup interface registers
+	 * This register write to REG_INTF_CONFIG6 enables a spike filter that
+	 * is impacting the line and can prevent the I2C ACK to be seen by the
+	 * controller. So we don't test the return value.
+	 */
+	regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
+			   INV_ICM42600_INTF_CONFIG6_MASK,
+			   INV_ICM42600_INTF_CONFIG6_I3C_EN);
+
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
+				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
+	if (ret)
+		return ret;
+
+	/* set slew rates for I2C and SPI */
+	mask = INV_ICM42600_DRIVE_CONFIG_I2C_MASK |
+	       INV_ICM42600_DRIVE_CONFIG_SPI_MASK;
+	val = INV_ICM42600_DRIVE_CONFIG_I2C(INV_ICM42600_SLEW_RATE_12_36NS) |
+	      INV_ICM42600_DRIVE_CONFIG_SPI(INV_ICM42600_SLEW_RATE_12_36NS);
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_DRIVE_CONFIG,
+				 mask, val);
+	if (ret)
+		return ret;
+
+	/* disable SPI bus */
+	return regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
+				  INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK,
+				  INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS);
+}
+
+static int inv_icm42600_probe(struct i2c_client *client)
+{
+	const void *match;
+	enum inv_icm42600_chip chip;
+	struct regmap *regmap;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -ENOTSUPP;
+
+	match = device_get_match_data(&client->dev);
+	if (!match)
+		return -EINVAL;
+	chip = (uintptr_t)match;
+
+	regmap = devm_regmap_init_i2c(client, &inv_icm42600_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return inv_icm42600_core_probe(regmap, chip, client->irq,
+				       inv_icm42600_i2c_bus_setup);
+}
+
+static const struct of_device_id inv_icm42600_of_matches[] = {
+	{
+		.compatible = "invensense,icm42600",
+		.data = (void *)INV_CHIP_ICM42600,
+	}, {
+		.compatible = "invensense,icm42602",
+		.data = (void *)INV_CHIP_ICM42602,
+	}, {
+		.compatible = "invensense,icm42605",
+		.data = (void *)INV_CHIP_ICM42605,
+	}, {
+		.compatible = "invensense,icm42622",
+		.data = (void *)INV_CHIP_ICM42622,
+	}, {
+		.compatible = "invensense,icm42631",
+		.data = (void *)INV_CHIP_ICM42631,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, inv_icm42600_of_matches);
+
+static struct i2c_driver inv_icm42600_driver = {
+	.driver = {
+		.name = "inv-icm42600-i2c",
+		.of_match_table = inv_icm42600_of_matches,
+		.pm = pm_ptr(&inv_icm42600_pm_ops),
+	},
+	.probe = inv_icm42600_probe,
+};
+module_i2c_driver(inv_icm42600_driver);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-426xx I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ICM42600);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
new file mode 100644
index 0000000000..6be4ac7949
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/property.h>
+
+#include "inv_icm42600.h"
+
+static int inv_icm42600_spi_bus_setup(struct inv_icm42600_state *st)
+{
+	unsigned int mask, val;
+	int ret;
+
+	/* setup interface registers */
+	val = INV_ICM42600_INTF_CONFIG6_I3C_EN |
+	      INV_ICM42600_INTF_CONFIG6_I3C_SDR_EN |
+	      INV_ICM42600_INTF_CONFIG6_I3C_DDR_EN;
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
+				 INV_ICM42600_INTF_CONFIG6_MASK, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
+				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
+	if (ret)
+		return ret;
+
+	/* set slew rates for I2C and SPI */
+	mask = INV_ICM42600_DRIVE_CONFIG_I2C_MASK |
+	       INV_ICM42600_DRIVE_CONFIG_SPI_MASK;
+	val = INV_ICM42600_DRIVE_CONFIG_I2C(INV_ICM42600_SLEW_RATE_20_60NS) |
+	      INV_ICM42600_DRIVE_CONFIG_SPI(INV_ICM42600_SLEW_RATE_INF_2NS);
+	ret = regmap_update_bits(st->map, INV_ICM42600_REG_DRIVE_CONFIG,
+				 mask, val);
+	if (ret)
+		return ret;
+
+	/* disable i2c bus */
+	return regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
+				  INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK,
+				  INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS);
+}
+
+static int inv_icm42600_probe(struct spi_device *spi)
+{
+	const void *match;
+	enum inv_icm42600_chip chip;
+	struct regmap *regmap;
+
+	match = device_get_match_data(&spi->dev);
+	if (!match)
+		return -EINVAL;
+	chip = (uintptr_t)match;
+
+	regmap = devm_regmap_init_spi(spi, &inv_icm42600_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return inv_icm42600_core_probe(regmap, chip, spi->irq,
+				       inv_icm42600_spi_bus_setup);
+}
+
+static const struct of_device_id inv_icm42600_of_matches[] = {
+	{
+		.compatible = "invensense,icm42600",
+		.data = (void *)INV_CHIP_ICM42600,
+	}, {
+		.compatible = "invensense,icm42602",
+		.data = (void *)INV_CHIP_ICM42602,
+	}, {
+		.compatible = "invensense,icm42605",
+		.data = (void *)INV_CHIP_ICM42605,
+	}, {
+		.compatible = "invensense,icm42622",
+		.data = (void *)INV_CHIP_ICM42622,
+	}, {
+		.compatible = "invensense,icm42631",
+		.data = (void *)INV_CHIP_ICM42631,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, inv_icm42600_of_matches);
+
+static struct spi_driver inv_icm42600_driver = {
+	.driver = {
+		.name = "inv-icm42600-spi",
+		.of_match_table = inv_icm42600_of_matches,
+		.pm = pm_ptr(&inv_icm42600_pm_ops),
+	},
+	.probe = inv_icm42600_probe,
+};
+module_spi_driver(inv_icm42600_driver);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-426xx SPI driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ICM42600);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
new file mode 100644
index 0000000000..213cce1c31
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#include "inv_icm42600.h"
+#include "inv_icm42600_temp.h"
+
+static int inv_icm42600_temp_read(struct inv_icm42600_state *st, int16_t *temp)
+{
+	struct device *dev = regmap_get_device(st->map);
+	__be16 *raw;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&st->lock);
+
+	ret = inv_icm42600_set_temp_conf(st, true, NULL);
+	if (ret)
+		goto exit;
+
+	raw = (__be16 *)&st->buffer[0];
+	ret = regmap_bulk_read(st->map, INV_ICM42600_REG_TEMP_DATA, raw, sizeof(*raw));
+	if (ret)
+		goto exit;
+
+	*temp = (int16_t)be16_to_cpup(raw);
+	if (*temp == INV_ICM42600_DATA_INVALID)
+		ret = -EINVAL;
+
+exit:
+	mutex_unlock(&st->lock);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+int inv_icm42600_temp_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	int16_t temp;
+	int ret;
+
+	if (chan->type != IIO_TEMP)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = inv_icm42600_temp_read(st, &temp);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		*val = temp;
+		return IIO_VAL_INT;
+	/*
+	 * T°C = (temp / 132.48) + 25
+	 * Tm°C = 1000 * ((temp * 100 / 13248) + 25)
+	 * scale: 100000 / 13248 ~= 7.548309
+	 * offset: 25000
+	 */
+	case IIO_CHAN_INFO_SCALE:
+		*val = 7;
+		*val2 = 548309;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 25000;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.h b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.h
new file mode 100644
index 0000000000..3941186512
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#ifndef INV_ICM42600_TEMP_H_
+#define INV_ICM42600_TEMP_H_
+
+#include <linux/iio/iio.h>
+
+#define INV_ICM42600_TEMP_CHAN(_index)					\
+	{								\
+		.type = IIO_TEMP,					\
+		.info_mask_separate =					\
+			BIT(IIO_CHAN_INFO_RAW) |			\
+			BIT(IIO_CHAN_INFO_OFFSET) |			\
+			BIT(IIO_CHAN_INFO_SCALE),			\
+		.scan_index = _index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+		},							\
+	}
+
+int inv_icm42600_temp_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask);
+
+#endif
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
new file mode 100644
index 0000000000..5f62e4fd47
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# inv-mpu6050 drivers for Invensense MPU devices and combos
+#
+
+config INV_MPU6050_IIO
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_INV_SENSORS_TIMESTAMP
+
+config INV_MPU6050_I2C
+	tristate "Invensense MPU6050 devices (I2C)"
+	depends on I2C
+	select I2C_MUX
+	select INV_MPU6050_IIO
+	select REGMAP_I2C
+	help
+	  This driver supports the Invensense MPU6050/9150,
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20600/20602/20690
+	  and IAM20680 motion tracking devices over I2C.
+	  This driver can be built as a module. The module will be called
+	  inv-mpu6050-i2c.
+
+config INV_MPU6050_SPI
+	tristate "Invensense MPU6050 devices (SPI)"
+	depends on SPI_MASTER
+	select INV_MPU6050_IIO
+	select REGMAP_SPI
+	help
+	  This driver supports the Invensense MPU6000,
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20600/20602/20690
+	  and IAM20680 motion tracking devices over SPI.
+	  This driver can be built as a module. The module will be called
+	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
new file mode 100644
index 0000000000..c103441a90
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Invensense MPU6050 device.
+#
+
+obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
+inv-mpu6050-y := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o \
+		 inv_mpu_aux.o inv_mpu_magn.o
+
+obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o
+inv-mpu6050-i2c-y := inv_mpu_i2c.o inv_mpu_acpi.o
+
+obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o
+inv-mpu6050-spi-y := inv_mpu_spi.o
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
new file mode 100644
index 0000000000..f7bce428d9
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * inv_mpu_acpi: ACPI processing for creating client devices
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#ifdef CONFIG_ACPI
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include "inv_mpu_iio.h"
+
+enum inv_mpu_product_name {
+	INV_MPU_NOT_MATCHED,
+	INV_MPU_ASUS_T100TA,
+};
+
+static enum inv_mpu_product_name matched_product_name;
+
+static int __init asus_t100_matched(const struct dmi_system_id *d)
+{
+	matched_product_name = INV_MPU_ASUS_T100TA;
+
+	return 0;
+}
+
+static const struct dmi_system_id inv_mpu_dev_list[] = {
+	{
+	.callback = asus_t100_matched,
+	.ident = "Asus Transformer Book T100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
+		},
+	},
+	/* Add more matching tables here..*/
+	{}
+};
+
+static int asus_acpi_get_sensor_info(struct acpi_device *adev,
+				     struct i2c_client *client,
+				     struct i2c_board_info *info)
+{
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+	acpi_status status;
+	union acpi_object *cpm;
+	int ret;
+
+	status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	cpm = buffer.pointer;
+	for (i = 0; i < cpm->package.count; ++i) {
+		union acpi_object *elem;
+		int j;
+
+		elem = &cpm->package.elements[i];
+		for (j = 0; j < elem->package.count; ++j) {
+			union acpi_object *sub_elem;
+
+			sub_elem = &elem->package.elements[j];
+			if (sub_elem->type == ACPI_TYPE_STRING)
+				strscpy(info->type, sub_elem->string.pointer,
+					sizeof(info->type));
+			else if (sub_elem->type == ACPI_TYPE_INTEGER) {
+				if (sub_elem->integer.value != client->addr) {
+					info->addr = sub_elem->integer.value;
+					break; /* Not a MPU6500 primary */
+				}
+			}
+		}
+	}
+	ret = cpm->package.count;
+	kfree(buffer.pointer);
+
+	return ret;
+}
+
+static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data)
+{
+	struct acpi_resource_i2c_serialbus *sb;
+	u32 *addr = data;
+
+	if (i2c_acpi_get_i2c_resource(ares, &sb)) {
+		if (*addr)
+			*addr |= (sb->slave_address << 16);
+		else
+			*addr = sb->slave_address;
+	}
+
+	/* Tell the ACPI core that we already copied this address */
+	return 1;
+}
+
+static int inv_mpu_process_acpi_config(struct i2c_client *client,
+				       unsigned short *primary_addr,
+				       unsigned short *secondary_addr)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+	const struct acpi_device_id *id;
+	u32 i2c_addr = 0;
+	LIST_HEAD(resources);
+	int ret;
+
+	id = acpi_match_device(client->dev.driver->acpi_match_table,
+			       &client->dev);
+	if (!id)
+		return -ENODEV;
+
+	ret = acpi_dev_get_resources(adev, &resources,
+				     acpi_i2c_check_resource, &i2c_addr);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&resources);
+	*primary_addr = i2c_addr & 0x0000ffff;
+	*secondary_addr = (i2c_addr & 0xffff0000) >> 16;
+
+	return 0;
+}
+
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+	st->mux_client = NULL;
+	if (adev) {
+		struct i2c_board_info info;
+		struct i2c_client *mux_client;
+		int ret = -1;
+
+		memset(&info, 0, sizeof(info));
+
+		dmi_check_system(inv_mpu_dev_list);
+		switch (matched_product_name) {
+		case INV_MPU_ASUS_T100TA:
+			ret = asus_acpi_get_sensor_info(adev, client,
+							&info);
+			break;
+		/* Add more matched product processing here */
+		default:
+			break;
+		}
+
+		if (ret < 0) {
+			/* No matching DMI, so create device on INV6XX type */
+			unsigned short primary, secondary;
+
+			ret = inv_mpu_process_acpi_config(client, &primary,
+							  &secondary);
+			if (!ret && secondary) {
+				char *name;
+
+				info.addr = secondary;
+				strscpy(info.type, dev_name(&adev->dev),
+					sizeof(info.type));
+				name = strchr(info.type, ':');
+				if (name)
+					*name = '\0';
+				strlcat(info.type, "-client",
+					sizeof(info.type));
+			} else
+				return 0; /* no secondary addr, which is OK */
+		}
+		mux_client = i2c_new_client_device(st->muxc->adapter[0], &info);
+		if (IS_ERR(mux_client))
+			return PTR_ERR(mux_client);
+		st->mux_client = mux_client;
+	}
+
+	return 0;
+}
+
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
+
+	i2c_unregister_device(st->mux_client);
+}
+#else
+
+#include "inv_mpu_iio.h"
+
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
+{
+	return 0;
+}
+
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
+{
+}
+#endif
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
new file mode 100644
index 0000000000..7327e5723f
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+
+#include "inv_mpu_aux.h"
+#include "inv_mpu_iio.h"
+
+/*
+ * i2c master auxiliary bus transfer function.
+ * Requires the i2c operations to be correctly setup before.
+ */
+static int inv_mpu_i2c_master_xfer(const struct inv_mpu6050_state *st)
+{
+	/* use 50hz frequency for xfer */
+	const unsigned int freq = 50;
+	const unsigned int period_ms = 1000 / freq;
+	uint8_t d;
+	unsigned int user_ctrl;
+	int ret;
+
+	/* set sample rate */
+	d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(freq);
+	ret = regmap_write(st->map, st->reg->sample_rate_div, d);
+	if (ret)
+		return ret;
+
+	/* start i2c master */
+	user_ctrl = st->chip_config.user_ctrl | INV_MPU6050_BIT_I2C_MST_EN;
+	ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+	if (ret)
+		goto error_restore_rate;
+
+	/* wait for xfer: 1 period + half-period margin */
+	msleep(period_ms + period_ms / 2);
+
+	/* stop i2c master */
+	user_ctrl = st->chip_config.user_ctrl;
+	ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+	if (ret)
+		goto error_stop_i2c;
+
+	/* restore sample rate */
+	d = st->chip_config.divider;
+	ret = regmap_write(st->map, st->reg->sample_rate_div, d);
+	if (ret)
+		goto error_restore_rate;
+
+	return 0;
+
+error_stop_i2c:
+	regmap_write(st->map, st->reg->user_ctrl, st->chip_config.user_ctrl);
+error_restore_rate:
+	regmap_write(st->map, st->reg->sample_rate_div, st->chip_config.divider);
+	return ret;
+}
+
+/**
+ * inv_mpu_aux_init() - init i2c auxiliary bus
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
+{
+	unsigned int val;
+	int ret;
+
+	/* configure i2c master */
+	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
+			INV_MPU6050_BIT_WAIT_FOR_ES;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_MST_CTRL, val);
+	if (ret)
+		return ret;
+
+	/* configure i2c master delay */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV4_CTRL, 0);
+	if (ret)
+		return ret;
+
+	val = INV_MPU6050_BIT_I2C_SLV0_DLY_EN |
+			INV_MPU6050_BIT_I2C_SLV1_DLY_EN |
+			INV_MPU6050_BIT_I2C_SLV2_DLY_EN |
+			INV_MPU6050_BIT_I2C_SLV3_DLY_EN |
+			INV_MPU6050_BIT_DELAY_ES_SHADOW;
+	return regmap_write(st->map, INV_MPU6050_REG_I2C_MST_DELAY_CTRL, val);
+}
+
+/**
+ * inv_mpu_aux_read() - read register function for i2c auxiliary bus
+ * @st: driver internal state.
+ * @addr: chip i2c Address
+ * @reg: chip register address
+ * @val: buffer for storing read bytes
+ * @size: number of bytes to read
+ *
+ *  Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_read(const struct inv_mpu6050_state *st, uint8_t addr,
+		     uint8_t reg, uint8_t *val, size_t size)
+{
+	unsigned int status;
+	int ret;
+
+	if (size > 0x0F)
+		return -EINVAL;
+
+	/* setup i2c SLV0 control: i2c addr, register, enable + size */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0),
+			   INV_MPU6050_BIT_I2C_SLV_RNW | addr);
+	if (ret)
+		return ret;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0), reg);
+	if (ret)
+		return ret;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+			   INV_MPU6050_BIT_SLV_EN | size);
+	if (ret)
+		return ret;
+
+	/* do i2c xfer */
+	ret = inv_mpu_i2c_master_xfer(st);
+	if (ret)
+		goto error_disable_i2c;
+
+	/* disable i2c slave */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+	if (ret)
+		goto error_disable_i2c;
+
+	/* check i2c status */
+	ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+	if (ret)
+		return ret;
+	if (status & INV_MPU6050_BIT_I2C_SLV0_NACK)
+		return -EIO;
+
+	/* read data in registers */
+	return regmap_bulk_read(st->map, INV_MPU6050_REG_EXT_SENS_DATA,
+				val, size);
+
+error_disable_i2c:
+	regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+	return ret;
+}
+
+/**
+ * inv_mpu_aux_write() - write register function for i2c auxiliary bus
+ * @st: driver internal state.
+ * @addr: chip i2c Address
+ * @reg: chip register address
+ * @val: 1 byte value to write
+ *
+ *  Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_write(const struct inv_mpu6050_state *st, uint8_t addr,
+		      uint8_t reg, uint8_t val)
+{
+	unsigned int status;
+	int ret;
+
+	/* setup i2c SLV0 control: i2c addr, register, value, enable + size */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0), addr);
+	if (ret)
+		return ret;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0), reg);
+	if (ret)
+		return ret;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(0), val);
+	if (ret)
+		return ret;
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+			   INV_MPU6050_BIT_SLV_EN | 1);
+	if (ret)
+		return ret;
+
+	/* do i2c xfer */
+	ret = inv_mpu_i2c_master_xfer(st);
+	if (ret)
+		goto error_disable_i2c;
+
+	/* disable i2c slave */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+	if (ret)
+		goto error_disable_i2c;
+
+	/* check i2c status */
+	ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+	if (ret)
+		return ret;
+	if (status & INV_MPU6050_BIT_I2C_SLV0_NACK)
+		return -EIO;
+
+	return 0;
+
+error_disable_i2c:
+	regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+	return ret;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h
new file mode 100644
index 0000000000..b669975457
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#ifndef INV_MPU_AUX_H_
+#define INV_MPU_AUX_H_
+
+#include "inv_mpu_iio.h"
+
+int inv_mpu_aux_init(const struct inv_mpu6050_state *st);
+
+int inv_mpu_aux_read(const struct inv_mpu6050_state *st, uint8_t addr,
+		     uint8_t reg, uint8_t *val, size_t size);
+
+int inv_mpu_aux_write(const struct inv_mpu6050_state *st, uint8_t addr,
+		      uint8_t reg, uint8_t val);
+
+#endif		/* INV_MPU_AUX_H_ */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
new file mode 100644
index 0000000000..a9a5fb266e
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -0,0 +1,1806 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/iio.h>
+
+#include "inv_mpu_iio.h"
+#include "inv_mpu_magn.h"
+
+/*
+ * this is the gyro scale translated from dynamic range plus/minus
+ * {250, 500, 1000, 2000} to rad/s
+ */
+static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
+
+/*
+ * this is the accel scale translated from dynamic range plus/minus
+ * {2, 4, 8, 16} to m/s^2
+ */
+static const int accel_scale[] = {598, 1196, 2392, 4785};
+
+static const struct inv_mpu6050_reg_map reg_set_icm20602 = {
+	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
+	.lpf                    = INV_MPU6050_REG_CONFIG,
+	.accel_lpf              = INV_MPU6500_REG_ACCEL_CONFIG_2,
+	.user_ctrl              = INV_MPU6050_REG_USER_CTRL,
+	.fifo_en                = INV_MPU6050_REG_FIFO_EN,
+	.gyro_config            = INV_MPU6050_REG_GYRO_CONFIG,
+	.accl_config            = INV_MPU6050_REG_ACCEL_CONFIG,
+	.fifo_count_h           = INV_MPU6050_REG_FIFO_COUNT_H,
+	.fifo_r_w               = INV_MPU6050_REG_FIFO_R_W,
+	.raw_gyro               = INV_MPU6050_REG_RAW_GYRO,
+	.raw_accl               = INV_MPU6050_REG_RAW_ACCEL,
+	.temperature            = INV_MPU6050_REG_TEMPERATURE,
+	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
+	.int_status             = INV_MPU6050_REG_INT_STATUS,
+	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
+	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg            = INV_MPU6050_REG_INT_PIN_CFG,
+	.accl_offset            = INV_MPU6500_REG_ACCEL_OFFSET,
+	.gyro_offset            = INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = INV_ICM20602_REG_I2C_IF,
+};
+
+static const struct inv_mpu6050_reg_map reg_set_6500 = {
+	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
+	.lpf                    = INV_MPU6050_REG_CONFIG,
+	.accel_lpf              = INV_MPU6500_REG_ACCEL_CONFIG_2,
+	.user_ctrl              = INV_MPU6050_REG_USER_CTRL,
+	.fifo_en                = INV_MPU6050_REG_FIFO_EN,
+	.gyro_config            = INV_MPU6050_REG_GYRO_CONFIG,
+	.accl_config            = INV_MPU6050_REG_ACCEL_CONFIG,
+	.fifo_count_h           = INV_MPU6050_REG_FIFO_COUNT_H,
+	.fifo_r_w               = INV_MPU6050_REG_FIFO_R_W,
+	.raw_gyro               = INV_MPU6050_REG_RAW_GYRO,
+	.raw_accl               = INV_MPU6050_REG_RAW_ACCEL,
+	.temperature            = INV_MPU6050_REG_TEMPERATURE,
+	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
+	.int_status             = INV_MPU6050_REG_INT_STATUS,
+	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
+	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
+	.accl_offset		= INV_MPU6500_REG_ACCEL_OFFSET,
+	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
+};
+
+static const struct inv_mpu6050_reg_map reg_set_6050 = {
+	.sample_rate_div	= INV_MPU6050_REG_SAMPLE_RATE_DIV,
+	.lpf                    = INV_MPU6050_REG_CONFIG,
+	.user_ctrl              = INV_MPU6050_REG_USER_CTRL,
+	.fifo_en                = INV_MPU6050_REG_FIFO_EN,
+	.gyro_config            = INV_MPU6050_REG_GYRO_CONFIG,
+	.accl_config            = INV_MPU6050_REG_ACCEL_CONFIG,
+	.fifo_count_h           = INV_MPU6050_REG_FIFO_COUNT_H,
+	.fifo_r_w               = INV_MPU6050_REG_FIFO_R_W,
+	.raw_gyro               = INV_MPU6050_REG_RAW_GYRO,
+	.raw_accl               = INV_MPU6050_REG_RAW_ACCEL,
+	.temperature            = INV_MPU6050_REG_TEMPERATURE,
+	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
+	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
+	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
+	.accl_offset		= INV_MPU6050_REG_ACCEL_OFFSET,
+	.gyro_offset		= INV_MPU6050_REG_GYRO_OFFSET,
+	.i2c_if                 = 0,
+};
+
+static const struct inv_mpu6050_chip_config chip_config_6050 = {
+	.clk = INV_CLK_INTERNAL,
+	.fsr = INV_MPU6050_FSR_2000DPS,
+	.lpf = INV_MPU6050_FILTER_20HZ,
+	.divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(50),
+	.gyro_en = true,
+	.accl_en = true,
+	.temp_en = true,
+	.magn_en = false,
+	.gyro_fifo_enable = false,
+	.accl_fifo_enable = false,
+	.temp_fifo_enable = false,
+	.magn_fifo_enable = false,
+	.accl_fs = INV_MPU6050_FS_02G,
+	.user_ctrl = 0,
+};
+
+static const struct inv_mpu6050_chip_config chip_config_6500 = {
+	.clk = INV_CLK_PLL,
+	.fsr = INV_MPU6050_FSR_2000DPS,
+	.lpf = INV_MPU6050_FILTER_20HZ,
+	.divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(50),
+	.gyro_en = true,
+	.accl_en = true,
+	.temp_en = true,
+	.magn_en = false,
+	.gyro_fifo_enable = false,
+	.accl_fifo_enable = false,
+	.temp_fifo_enable = false,
+	.magn_fifo_enable = false,
+	.accl_fs = INV_MPU6050_FS_02G,
+	.user_ctrl = 0,
+};
+
+/* Indexed by enum inv_devices */
+static const struct inv_mpu6050_hw hw_info[] = {
+	{
+		.whoami = INV_MPU6050_WHOAMI_VALUE,
+		.name = "MPU6050",
+		.reg = &reg_set_6050,
+		.config = &chip_config_6050,
+		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+		.startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU6500_WHOAMI_VALUE,
+		.name = "MPU6500",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU6515_WHOAMI_VALUE,
+		.name = "MPU6515",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU6880_WHOAMI_VALUE,
+		.name = "MPU6880",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 4096,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU6000_WHOAMI_VALUE,
+		.name = "MPU6000",
+		.reg = &reg_set_6050,
+		.config = &chip_config_6050,
+		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+		.startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU9150_WHOAMI_VALUE,
+		.name = "MPU9150",
+		.reg = &reg_set_6050,
+		.config = &chip_config_6050,
+		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+		.startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU9250_WHOAMI_VALUE,
+		.name = "MPU9250",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_MPU9255_WHOAMI_VALUE,
+		.name = "MPU9255",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20608_WHOAMI_VALUE,
+		.name = "ICM20608",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20608D_WHOAMI_VALUE,
+		.name = "ICM20608D",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20609_WHOAMI_VALUE,
+		.name = "ICM20609",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 4 * 1024,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20689_WHOAMI_VALUE,
+		.name = "ICM20689",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 4 * 1024,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20600_WHOAMI_VALUE,
+		.name = "ICM20600",
+		.reg = &reg_set_icm20602,
+		.config = &chip_config_6500,
+		.fifo_size = 1008,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_ICM20602_GYRO_STARTUP_TIME, INV_ICM20602_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20602_WHOAMI_VALUE,
+		.name = "ICM20602",
+		.reg = &reg_set_icm20602,
+		.config = &chip_config_6500,
+		.fifo_size = 1008,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_ICM20602_GYRO_STARTUP_TIME, INV_ICM20602_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_ICM20690_WHOAMI_VALUE,
+		.name = "ICM20690",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 1024,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_ICM20690_GYRO_STARTUP_TIME, INV_ICM20690_ACCEL_STARTUP_TIME},
+	},
+	{
+		.whoami = INV_IAM20680_WHOAMI_VALUE,
+		.name = "IAM20680",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
+};
+
+static int inv_mpu6050_pwr_mgmt_1_write(struct inv_mpu6050_state *st, bool sleep,
+					int clock, int temp_dis)
+{
+	u8 val;
+
+	if (clock < 0)
+		clock = st->chip_config.clk;
+	if (temp_dis < 0)
+		temp_dis = !st->chip_config.temp_en;
+
+	val = clock & INV_MPU6050_BIT_CLK_MASK;
+	if (temp_dis)
+		val |= INV_MPU6050_BIT_TEMP_DIS;
+	if (sleep)
+		val |= INV_MPU6050_BIT_SLEEP;
+
+	dev_dbg(regmap_get_device(st->map), "pwr_mgmt_1: 0x%x\n", val);
+	return regmap_write(st->map, st->reg->pwr_mgmt_1, val);
+}
+
+static int inv_mpu6050_clock_switch(struct inv_mpu6050_state *st,
+				    unsigned int clock)
+{
+	int ret;
+
+	switch (st->chip_type) {
+	case INV_MPU6050:
+	case INV_MPU6000:
+	case INV_MPU9150:
+		/* old chips: switch clock manually */
+		ret = inv_mpu6050_pwr_mgmt_1_write(st, false, clock, -1);
+		if (ret)
+			return ret;
+		st->chip_config.clk = clock;
+		break;
+	default:
+		/* automatic clock switching, nothing to do */
+		break;
+	}
+
+	return 0;
+}
+
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en,
+			      unsigned int mask)
+{
+	unsigned int sleep;
+	u8 pwr_mgmt2, user_ctrl;
+	int ret;
+
+	/* delete useless requests */
+	if (mask & INV_MPU6050_SENSOR_ACCL && en == st->chip_config.accl_en)
+		mask &= ~INV_MPU6050_SENSOR_ACCL;
+	if (mask & INV_MPU6050_SENSOR_GYRO && en == st->chip_config.gyro_en)
+		mask &= ~INV_MPU6050_SENSOR_GYRO;
+	if (mask & INV_MPU6050_SENSOR_TEMP && en == st->chip_config.temp_en)
+		mask &= ~INV_MPU6050_SENSOR_TEMP;
+	if (mask & INV_MPU6050_SENSOR_MAGN && en == st->chip_config.magn_en)
+		mask &= ~INV_MPU6050_SENSOR_MAGN;
+	if (mask == 0)
+		return 0;
+
+	/* turn on/off temperature sensor */
+	if (mask & INV_MPU6050_SENSOR_TEMP) {
+		ret = inv_mpu6050_pwr_mgmt_1_write(st, false, -1, !en);
+		if (ret)
+			return ret;
+		st->chip_config.temp_en = en;
+	}
+
+	/* update user_crtl for driving magnetometer */
+	if (mask & INV_MPU6050_SENSOR_MAGN) {
+		user_ctrl = st->chip_config.user_ctrl;
+		if (en)
+			user_ctrl |= INV_MPU6050_BIT_I2C_MST_EN;
+		else
+			user_ctrl &= ~INV_MPU6050_BIT_I2C_MST_EN;
+		ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+		if (ret)
+			return ret;
+		st->chip_config.user_ctrl = user_ctrl;
+		st->chip_config.magn_en = en;
+	}
+
+	/* manage accel & gyro engines */
+	if (mask & (INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO)) {
+		/* compute power management 2 current value */
+		pwr_mgmt2 = 0;
+		if (!st->chip_config.accl_en)
+			pwr_mgmt2 |= INV_MPU6050_BIT_PWR_ACCL_STBY;
+		if (!st->chip_config.gyro_en)
+			pwr_mgmt2 |= INV_MPU6050_BIT_PWR_GYRO_STBY;
+
+		/* update to new requested value */
+		if (mask & INV_MPU6050_SENSOR_ACCL) {
+			if (en)
+				pwr_mgmt2 &= ~INV_MPU6050_BIT_PWR_ACCL_STBY;
+			else
+				pwr_mgmt2 |= INV_MPU6050_BIT_PWR_ACCL_STBY;
+		}
+		if (mask & INV_MPU6050_SENSOR_GYRO) {
+			if (en)
+				pwr_mgmt2 &= ~INV_MPU6050_BIT_PWR_GYRO_STBY;
+			else
+				pwr_mgmt2 |= INV_MPU6050_BIT_PWR_GYRO_STBY;
+		}
+
+		/* switch clock to internal when turning gyro off */
+		if (mask & INV_MPU6050_SENSOR_GYRO && !en) {
+			ret = inv_mpu6050_clock_switch(st, INV_CLK_INTERNAL);
+			if (ret)
+				return ret;
+		}
+
+		/* update sensors engine */
+		dev_dbg(regmap_get_device(st->map), "pwr_mgmt_2: 0x%x\n",
+			pwr_mgmt2);
+		ret = regmap_write(st->map, st->reg->pwr_mgmt_2, pwr_mgmt2);
+		if (ret)
+			return ret;
+		if (mask & INV_MPU6050_SENSOR_ACCL)
+			st->chip_config.accl_en = en;
+		if (mask & INV_MPU6050_SENSOR_GYRO)
+			st->chip_config.gyro_en = en;
+
+		/* compute required time to have sensors stabilized */
+		sleep = 0;
+		if (en) {
+			if (mask & INV_MPU6050_SENSOR_ACCL) {
+				if (sleep < st->hw->startup_time.accel)
+					sleep = st->hw->startup_time.accel;
+			}
+			if (mask & INV_MPU6050_SENSOR_GYRO) {
+				if (sleep < st->hw->startup_time.gyro)
+					sleep = st->hw->startup_time.gyro;
+			}
+		} else {
+			if (mask & INV_MPU6050_SENSOR_GYRO) {
+				if (sleep < INV_MPU6050_GYRO_DOWN_TIME)
+					sleep = INV_MPU6050_GYRO_DOWN_TIME;
+			}
+		}
+		if (sleep)
+			msleep(sleep);
+
+		/* switch clock to PLL when turning gyro on */
+		if (mask & INV_MPU6050_SENSOR_GYRO && en) {
+			ret = inv_mpu6050_clock_switch(st, INV_CLK_PLL);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st,
+				     bool power_on)
+{
+	int result;
+
+	result = inv_mpu6050_pwr_mgmt_1_write(st, !power_on, -1, -1);
+	if (result)
+		return result;
+
+	if (power_on)
+		usleep_range(INV_MPU6050_REG_UP_TIME_MIN,
+			     INV_MPU6050_REG_UP_TIME_MAX);
+
+	return 0;
+}
+
+static int inv_mpu6050_set_gyro_fsr(struct inv_mpu6050_state *st,
+				    enum inv_mpu6050_fsr_e val)
+{
+	unsigned int gyro_shift;
+	u8 data;
+
+	switch (st->chip_type) {
+	case INV_ICM20690:
+		gyro_shift = INV_ICM20690_GYRO_CONFIG_FSR_SHIFT;
+		break;
+	default:
+		gyro_shift = INV_MPU6050_GYRO_CONFIG_FSR_SHIFT;
+		break;
+	}
+
+	data = val << gyro_shift;
+	return regmap_write(st->map, st->reg->gyro_config, data);
+}
+
+/*
+ *  inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent
+ *
+ *  MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope
+ *  MPU6500 and above have a dedicated register for accelerometer
+ */
+static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st,
+				    enum inv_mpu6050_filter_e val)
+{
+	int result;
+
+	result = regmap_write(st->map, st->reg->lpf, val);
+	if (result)
+		return result;
+
+	/* set accel lpf */
+	switch (st->chip_type) {
+	case INV_MPU6050:
+	case INV_MPU6000:
+	case INV_MPU9150:
+		/* old chips, nothing to do */
+		return 0;
+	case INV_ICM20689:
+	case INV_ICM20690:
+		/* set FIFO size to maximum value */
+		val |= INV_ICM20689_BITS_FIFO_SIZE_MAX;
+		break;
+	default:
+		break;
+	}
+
+	return regmap_write(st->map, st->reg->accel_lpf, val);
+}
+
+/*
+ *  inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
+ *
+ *  Initial configuration:
+ *  FSR: ± 2000DPS
+ *  DLPF: 20Hz
+ *  FIFO rate: 50Hz
+ *  Clock source: Gyro PLL
+ */
+static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
+{
+	int result;
+	u8 d;
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp_chip timestamp;
+
+	result = inv_mpu6050_set_gyro_fsr(st, st->chip_config.fsr);
+	if (result)
+		return result;
+
+	result = inv_mpu6050_set_lpf_regs(st, st->chip_config.lpf);
+	if (result)
+		return result;
+
+	d = st->chip_config.divider;
+	result = regmap_write(st->map, st->reg->sample_rate_div, d);
+	if (result)
+		return result;
+
+	d = (st->chip_config.accl_fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+	result = regmap_write(st->map, st->reg->accl_config, d);
+	if (result)
+		return result;
+
+	result = regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask);
+	if (result)
+		return result;
+
+	/* clock jitter is +/- 2% */
+	timestamp.clock_period = NSEC_PER_SEC / INV_MPU6050_INTERNAL_FREQ_HZ;
+	timestamp.jitter = 20;
+	timestamp.init_period =
+			NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	inv_sensors_timestamp_init(&st->timestamp, &timestamp);
+
+	/* magn chip init, noop if not present in the chip */
+	result = inv_mpu_magn_probe(st);
+	if (result)
+		return result;
+
+	return 0;
+}
+
+static int inv_mpu6050_sensor_set(struct inv_mpu6050_state  *st, int reg,
+				int axis, int val)
+{
+	int ind, result;
+	__be16 d = cpu_to_be16(val);
+
+	ind = (axis - IIO_MOD_X) * 2;
+	result = regmap_bulk_write(st->map, reg + ind, &d, sizeof(d));
+	if (result)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int inv_mpu6050_sensor_show(struct inv_mpu6050_state  *st, int reg,
+				   int axis, int *val)
+{
+	int ind, result;
+	__be16 d;
+
+	ind = (axis - IIO_MOD_X) * 2;
+	result = regmap_bulk_read(st->map, reg + ind, &d, sizeof(d));
+	if (result)
+		return -EINVAL;
+	*val = (short)be16_to_cpup(&d);
+
+	return IIO_VAL_INT;
+}
+
+static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 int *val)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+	unsigned int freq_hz, period_us, min_sleep_us, max_sleep_us;
+	int result;
+	int ret;
+
+	/* compute sample period */
+	freq_hz = INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	period_us = 1000000 / freq_hz;
+
+	result = pm_runtime_resume_and_get(pdev);
+	if (result)
+		return result;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		if (!st->chip_config.gyro_en) {
+			result = inv_mpu6050_switch_engine(st, true,
+					INV_MPU6050_SENSOR_GYRO);
+			if (result)
+				goto error_power_off;
+			/* need to wait 2 periods to have first valid sample */
+			min_sleep_us = 2 * period_us;
+			max_sleep_us = 2 * (period_us + period_us / 2);
+			usleep_range(min_sleep_us, max_sleep_us);
+		}
+		ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
+					      chan->channel2, val);
+		break;
+	case IIO_ACCEL:
+		if (!st->chip_config.accl_en) {
+			result = inv_mpu6050_switch_engine(st, true,
+					INV_MPU6050_SENSOR_ACCL);
+			if (result)
+				goto error_power_off;
+			/* wait 1 period for first sample availability */
+			min_sleep_us = period_us;
+			max_sleep_us = period_us + period_us / 2;
+			usleep_range(min_sleep_us, max_sleep_us);
+		}
+		ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
+					      chan->channel2, val);
+		break;
+	case IIO_TEMP:
+		/* temperature sensor work only with accel and/or gyro */
+		if (!st->chip_config.accl_en && !st->chip_config.gyro_en) {
+			result = -EBUSY;
+			goto error_power_off;
+		}
+		if (!st->chip_config.temp_en) {
+			result = inv_mpu6050_switch_engine(st, true,
+					INV_MPU6050_SENSOR_TEMP);
+			if (result)
+				goto error_power_off;
+			/* wait 1 period for first sample availability */
+			min_sleep_us = period_us;
+			max_sleep_us = period_us + period_us / 2;
+			usleep_range(min_sleep_us, max_sleep_us);
+		}
+		ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
+					      IIO_MOD_X, val);
+		break;
+	case IIO_MAGN:
+		if (!st->chip_config.magn_en) {
+			result = inv_mpu6050_switch_engine(st, true,
+					INV_MPU6050_SENSOR_MAGN);
+			if (result)
+				goto error_power_off;
+			/* frequency is limited for magnetometer */
+			if (freq_hz > INV_MPU_MAGN_FREQ_HZ_MAX) {
+				freq_hz = INV_MPU_MAGN_FREQ_HZ_MAX;
+				period_us = 1000000 / freq_hz;
+			}
+			/* need to wait 2 periods to have first valid sample */
+			min_sleep_us = 2 * period_us;
+			max_sleep_us = 2 * (period_us + period_us / 2);
+			usleep_range(min_sleep_us, max_sleep_us);
+		}
+		ret = inv_mpu_magn_read(st, chan->channel2, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	pm_runtime_mark_last_busy(pdev);
+	pm_runtime_put_autosuspend(pdev);
+
+	return ret;
+
+error_power_off:
+	pm_runtime_put_autosuspend(pdev);
+	return result;
+}
+
+static int
+inv_mpu6050_read_raw(struct iio_dev *indio_dev,
+		     struct iio_chan_spec const *chan,
+		     int *val, int *val2, long mask)
+{
+	struct inv_mpu6050_state  *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&st->lock);
+		ret = inv_mpu6050_read_channel_data(indio_dev, chan, val);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			mutex_lock(&st->lock);
+			*val  = 0;
+			*val2 = gyro_scale_6050[st->chip_config.fsr];
+			mutex_unlock(&st->lock);
+
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_ACCEL:
+			mutex_lock(&st->lock);
+			*val = 0;
+			*val2 = accel_scale[st->chip_config.accl_fs];
+			mutex_unlock(&st->lock);
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			*val = st->hw->temp.scale / 1000000;
+			*val2 = st->hw->temp.scale % 1000000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MAGN:
+			return inv_mpu_magn_get_scale(st, chan, val, val2);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = st->hw->temp.offset;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			mutex_lock(&st->lock);
+			ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset,
+						chan->channel2, val);
+			mutex_unlock(&st->lock);
+			return ret;
+		case IIO_ACCEL:
+			mutex_lock(&st->lock);
+			ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset,
+						chan->channel2, val);
+			mutex_unlock(&st->lock);
+			return ret;
+
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val,
+					int val2)
+{
+	int result, i;
+
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) {
+		if (gyro_scale_6050[i] == val2) {
+			result = inv_mpu6050_set_gyro_fsr(st, i);
+			if (result)
+				return result;
+
+			st->chip_config.fsr = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
+
+static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val,
+					 int val2)
+{
+	int result, i;
+	u8 d;
+
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) {
+		if (accel_scale[i] == val2) {
+			d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+			result = regmap_write(st->map, st->reg->accl_config, d);
+			if (result)
+				return result;
+
+			st->chip_config.accl_fs = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int val, int val2, long mask)
+{
+	struct inv_mpu6050_state  *st = iio_priv(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+	int result;
+
+	/*
+	 * we should only update scale when the chip is disabled, i.e.
+	 * not running
+	 */
+	result = iio_device_claim_direct_mode(indio_dev);
+	if (result)
+		return result;
+
+	mutex_lock(&st->lock);
+	result = pm_runtime_resume_and_get(pdev);
+	if (result)
+		goto error_write_raw_unlock;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			result = inv_mpu6050_write_gyro_scale(st, val, val2);
+			break;
+		case IIO_ACCEL:
+			result = inv_mpu6050_write_accel_scale(st, val, val2);
+			break;
+		default:
+			result = -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			result = inv_mpu6050_sensor_set(st,
+							st->reg->gyro_offset,
+							chan->channel2, val);
+			break;
+		case IIO_ACCEL:
+			result = inv_mpu6050_sensor_set(st,
+							st->reg->accl_offset,
+							chan->channel2, val);
+			break;
+		default:
+			result = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		result = -EINVAL;
+		break;
+	}
+
+	pm_runtime_mark_last_busy(pdev);
+	pm_runtime_put_autosuspend(pdev);
+error_write_raw_unlock:
+	mutex_unlock(&st->lock);
+	iio_device_release_direct_mode(indio_dev);
+
+	return result;
+}
+
+/*
+ *  inv_mpu6050_set_lpf() - set low pass filer based on fifo rate.
+ *
+ *                  Based on the Nyquist principle, the bandwidth of the low
+ *                  pass filter must not exceed the signal sampling rate divided
+ *                  by 2, or there would be aliasing.
+ *                  This function basically search for the correct low pass
+ *                  parameters based on the fifo rate, e.g, sampling frequency.
+ *
+ *  lpf is set automatically when setting sampling rate to avoid any aliases.
+ */
+static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
+{
+	static const int hz[] = {400, 200, 90, 40, 20, 10};
+	static const int d[] = {
+		INV_MPU6050_FILTER_200HZ, INV_MPU6050_FILTER_100HZ,
+		INV_MPU6050_FILTER_45HZ, INV_MPU6050_FILTER_20HZ,
+		INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ
+	};
+	int i, result;
+	u8 data;
+
+	data = INV_MPU6050_FILTER_5HZ;
+	for (i = 0; i < ARRAY_SIZE(hz); ++i) {
+		if (rate >= hz[i]) {
+			data = d[i];
+			break;
+		}
+	}
+	result = inv_mpu6050_set_lpf_regs(st, data);
+	if (result)
+		return result;
+	st->chip_config.lpf = data;
+
+	return 0;
+}
+
+/*
+ * inv_mpu6050_fifo_rate_store() - Set fifo rate.
+ */
+static ssize_t
+inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	int fifo_rate;
+	u32 fifo_period;
+	bool fifo_on;
+	u8 d;
+	int result;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+
+	if (kstrtoint(buf, 10, &fifo_rate))
+		return -EINVAL;
+	if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE ||
+	    fifo_rate > INV_MPU6050_MAX_FIFO_RATE)
+		return -EINVAL;
+
+	/* compute the chip sample rate divider */
+	d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate);
+	/* compute back the fifo rate to handle truncation cases */
+	fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(d);
+	fifo_period = NSEC_PER_SEC / fifo_rate;
+
+	mutex_lock(&st->lock);
+	if (d == st->chip_config.divider) {
+		result = 0;
+		goto fifo_rate_fail_unlock;
+	}
+
+	fifo_on = st->chip_config.accl_fifo_enable ||
+		  st->chip_config.gyro_fifo_enable ||
+		  st->chip_config.magn_fifo_enable;
+	result = inv_sensors_timestamp_update_odr(&st->timestamp, fifo_period, fifo_on);
+	if (result)
+		goto fifo_rate_fail_unlock;
+
+	result = pm_runtime_resume_and_get(pdev);
+	if (result)
+		goto fifo_rate_fail_unlock;
+
+	result = regmap_write(st->map, st->reg->sample_rate_div, d);
+	if (result)
+		goto fifo_rate_fail_power_off;
+	st->chip_config.divider = d;
+
+	result = inv_mpu6050_set_lpf(st, fifo_rate);
+	if (result)
+		goto fifo_rate_fail_power_off;
+
+	/* update rate for magn, noop if not present in chip */
+	result = inv_mpu_magn_set_rate(st, fifo_rate);
+	if (result)
+		goto fifo_rate_fail_power_off;
+
+	pm_runtime_mark_last_busy(pdev);
+fifo_rate_fail_power_off:
+	pm_runtime_put_autosuspend(pdev);
+fifo_rate_fail_unlock:
+	mutex_unlock(&st->lock);
+	if (result)
+		return result;
+
+	return count;
+}
+
+/*
+ * inv_fifo_rate_show() - Get the current sampling rate.
+ */
+static ssize_t
+inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
+		   char *buf)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+	unsigned fifo_rate;
+
+	mutex_lock(&st->lock);
+	fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	mutex_unlock(&st->lock);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", fifo_rate);
+}
+
+/*
+ * inv_attr_show() - calling this function will show current
+ *                    parameters.
+ *
+ * Deprecated in favor of IIO mounting matrix API.
+ *
+ * See inv_get_mount_matrix()
+ */
+static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	s8 *m;
+
+	switch (this_attr->address) {
+	/*
+	 * In MPU6050, the two matrix are the same because gyro and accel
+	 * are integrated in one chip
+	 */
+	case ATTR_GYRO_MATRIX:
+	case ATTR_ACCL_MATRIX:
+		m = st->plat_data.orientation;
+
+		return scnprintf(buf, PAGE_SIZE,
+			"%d, %d, %d; %d, %d, %d; %d, %d, %d\n",
+			m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]);
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * inv_mpu6050_validate_trigger() - validate_trigger callback for invensense
+ *                                  MPU6050 device.
+ * @indio_dev: The IIO device
+ * @trig: The new trigger
+ *
+ * Returns: 0 if the 'trig' matches the trigger registered by the MPU6050
+ * device, -EINVAL otherwise.
+ */
+static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev,
+					struct iio_trigger *trig)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+	if (st->trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct iio_mount_matrix *
+inv_get_mount_matrix(const struct iio_dev *indio_dev,
+		     const struct iio_chan_spec *chan)
+{
+	struct inv_mpu6050_state *data = iio_priv(indio_dev);
+	const struct iio_mount_matrix *matrix;
+
+	if (chan->type == IIO_MAGN)
+		matrix = &data->magn_orient;
+	else
+		matrix = &data->orientation;
+
+	return matrix;
+}
+
+static const struct iio_chan_spec_ext_info inv_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, inv_get_mount_matrix),
+	{ }
+};
+
+#define INV_MPU6050_CHAN(_type, _channel2, _index)                    \
+	{                                                             \
+		.type = _type,                                        \
+		.modified = 1,                                        \
+		.channel2 = _channel2,                                \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	      \
+				      BIT(IIO_CHAN_INFO_CALIBBIAS),   \
+		.scan_index = _index,                                 \
+		.scan_type = {                                        \
+				.sign = 's',                          \
+				.realbits = 16,                       \
+				.storagebits = 16,                    \
+				.shift = 0,                           \
+				.endianness = IIO_BE,                 \
+			     },                                       \
+		.ext_info = inv_ext_info,                             \
+	}
+
+#define INV_MPU6050_TEMP_CHAN(_index)				\
+	{							\
+		.type = IIO_TEMP,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)	\
+				| BIT(IIO_CHAN_INFO_OFFSET)	\
+				| BIT(IIO_CHAN_INFO_SCALE),	\
+		.scan_index = _index,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.shift = 0,				\
+			.endianness = IIO_BE,			\
+		},						\
+	}
+
+static const struct iio_chan_spec inv_mpu_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(INV_MPU6050_SCAN_TIMESTAMP),
+
+	INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+};
+
+#define INV_MPU6050_SCAN_MASK_3AXIS_ACCEL	\
+	(BIT(INV_MPU6050_SCAN_ACCL_X)		\
+	| BIT(INV_MPU6050_SCAN_ACCL_Y)		\
+	| BIT(INV_MPU6050_SCAN_ACCL_Z))
+
+#define INV_MPU6050_SCAN_MASK_3AXIS_GYRO	\
+	(BIT(INV_MPU6050_SCAN_GYRO_X)		\
+	| BIT(INV_MPU6050_SCAN_GYRO_Y)		\
+	| BIT(INV_MPU6050_SCAN_GYRO_Z))
+
+#define INV_MPU6050_SCAN_MASK_TEMP		(BIT(INV_MPU6050_SCAN_TEMP))
+
+static const unsigned long inv_mpu_scan_masks[] = {
+	/* 3-axis accel */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 3-axis gyro */
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 6-axis accel + gyro */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	0,
+};
+
+#define INV_MPU9X50_MAGN_CHAN(_chan2, _bits, _index)			\
+	{								\
+		.type = IIO_MAGN,					\
+		.modified = 1,						\
+		.channel2 = _chan2,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) |	\
+				      BIT(IIO_CHAN_INFO_RAW),		\
+		.scan_index = _index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = _bits,				\
+			.storagebits = 16,				\
+			.shift = 0,					\
+			.endianness = IIO_BE,				\
+		},							\
+		.ext_info = inv_ext_info,				\
+	}
+
+static const struct iio_chan_spec inv_mpu9150_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
+
+	INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+
+	/* Magnetometer resolution is 13 bits */
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_X, 13, INV_MPU9X50_SCAN_MAGN_X),
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_Y, 13, INV_MPU9X50_SCAN_MAGN_Y),
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_Z, 13, INV_MPU9X50_SCAN_MAGN_Z),
+};
+
+static const struct iio_chan_spec inv_mpu9250_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
+
+	INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+
+	/* Magnetometer resolution is 16 bits */
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_X, 16, INV_MPU9X50_SCAN_MAGN_X),
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_Y, 16, INV_MPU9X50_SCAN_MAGN_Y),
+	INV_MPU9X50_MAGN_CHAN(IIO_MOD_Z, 16, INV_MPU9X50_SCAN_MAGN_Z),
+};
+
+#define INV_MPU9X50_SCAN_MASK_3AXIS_MAGN	\
+	(BIT(INV_MPU9X50_SCAN_MAGN_X)		\
+	| BIT(INV_MPU9X50_SCAN_MAGN_Y)		\
+	| BIT(INV_MPU9X50_SCAN_MAGN_Z))
+
+static const unsigned long inv_mpu9x50_scan_masks[] = {
+	/* 3-axis accel */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 3-axis gyro */
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 3-axis magn */
+	INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+	INV_MPU9X50_SCAN_MASK_3AXIS_MAGN | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 6-axis accel + gyro */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	/* 6-axis accel + magn */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	/* 6-axis gyro + magn */
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	/* 9-axis accel + gyro + magn */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+		| INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+		| INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	0,
+};
+
+static const unsigned long inv_icm20602_scan_masks[] = {
+	/* 3-axis accel + temp (mandatory) */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 3-axis gyro + temp (mandatory) */
+	INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+	/* 6-axis accel + gyro + temp (mandatory) */
+	INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+		| INV_MPU6050_SCAN_MASK_TEMP,
+	0,
+};
+
+/*
+ * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
+ * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
+ * low-pass filter. Specifically, each of these sampling rates are about twice
+ * the bandwidth of a corresponding low-pass filter, which should eliminate
+ * aliasing following the Nyquist principle. By picking a frequency different
+ * from these, the user risks aliasing effects.
+ */
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500");
+static IIO_CONST_ATTR(in_anglvel_scale_available,
+					  "0.000133090 0.000266181 0.000532362 0.001064724");
+static IIO_CONST_ATTR(in_accel_scale_available,
+					  "0.000598 0.001196 0.002392 0.004785");
+static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show,
+	inv_mpu6050_fifo_rate_store);
+
+/* Deprecated: kept for userspace backward compatibility. */
+static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL,
+	ATTR_GYRO_MATRIX);
+static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL,
+	ATTR_ACCL_MATRIX);
+
+static struct attribute *inv_attributes[] = {
+	&iio_dev_attr_in_gyro_matrix.dev_attr.attr,  /* deprecated */
+	&iio_dev_attr_in_accel_matrix.dev_attr.attr, /* deprecated */
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group inv_attribute_group = {
+	.attrs = inv_attributes
+};
+
+static int inv_mpu6050_reg_access(struct iio_dev *indio_dev,
+				  unsigned int reg,
+				  unsigned int writeval,
+				  unsigned int *readval)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval)
+		ret = regmap_read(st->map, reg, readval);
+	else
+		ret = regmap_write(st->map, reg, writeval);
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_info mpu_info = {
+	.read_raw = &inv_mpu6050_read_raw,
+	.write_raw = &inv_mpu6050_write_raw,
+	.write_raw_get_fmt = &inv_write_raw_get_fmt,
+	.attrs = &inv_attribute_group,
+	.validate_trigger = inv_mpu6050_validate_trigger,
+	.debugfs_reg_access = &inv_mpu6050_reg_access,
+};
+
+/*
+ *  inv_check_and_setup_chip() - check and setup chip.
+ */
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
+{
+	int result;
+	unsigned int regval, mask;
+	int i;
+
+	st->hw  = &hw_info[st->chip_type];
+	st->reg = hw_info[st->chip_type].reg;
+	memcpy(&st->chip_config, hw_info[st->chip_type].config,
+	       sizeof(st->chip_config));
+	st->data = devm_kzalloc(regmap_get_device(st->map), st->hw->fifo_size, GFP_KERNEL);
+	if (st->data == NULL)
+		return -ENOMEM;
+
+	/* check chip self-identification */
+	result = regmap_read(st->map, INV_MPU6050_REG_WHOAMI, &regval);
+	if (result)
+		return result;
+	if (regval != st->hw->whoami) {
+		/* check whoami against all possible values */
+		for (i = 0; i < INV_NUM_PARTS; ++i) {
+			if (regval == hw_info[i].whoami) {
+				dev_warn(regmap_get_device(st->map),
+					"whoami mismatch got 0x%02x (%s) expected 0x%02x (%s)\n",
+					regval, hw_info[i].name,
+					st->hw->whoami, st->hw->name);
+				break;
+			}
+		}
+		if (i >= INV_NUM_PARTS) {
+			dev_err(regmap_get_device(st->map),
+				"invalid whoami 0x%02x expected 0x%02x (%s)\n",
+				regval, st->hw->whoami, st->hw->name);
+			return -ENODEV;
+		}
+	}
+
+	/* reset to make sure previous state are not there */
+	result = regmap_write(st->map, st->reg->pwr_mgmt_1,
+			      INV_MPU6050_BIT_H_RESET);
+	if (result)
+		return result;
+	msleep(INV_MPU6050_POWER_UP_TIME);
+	switch (st->chip_type) {
+	case INV_MPU6000:
+	case INV_MPU6500:
+	case INV_MPU6515:
+	case INV_MPU6880:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		/* reset signal path (required for spi connection) */
+		regval = INV_MPU6050_BIT_TEMP_RST | INV_MPU6050_BIT_ACCEL_RST |
+			 INV_MPU6050_BIT_GYRO_RST;
+		result = regmap_write(st->map, INV_MPU6050_REG_SIGNAL_PATH_RESET,
+				      regval);
+		if (result)
+			return result;
+		msleep(INV_MPU6050_POWER_UP_TIME);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Turn power on. After reset, the sleep bit could be on
+	 * or off depending on the OTP settings. Turning power on
+	 * make it in a definite state as well as making the hardware
+	 * state align with the software state
+	 */
+	result = inv_mpu6050_set_power_itg(st, true);
+	if (result)
+		return result;
+	mask = INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO |
+			INV_MPU6050_SENSOR_TEMP | INV_MPU6050_SENSOR_MAGN;
+	result = inv_mpu6050_switch_engine(st, false, mask);
+	if (result)
+		goto error_power_off;
+
+	return 0;
+
+error_power_off:
+	inv_mpu6050_set_power_itg(st, false);
+	return result;
+}
+
+static int inv_mpu_core_enable_regulator_vddio(struct inv_mpu6050_state *st)
+{
+	int result;
+
+	result = regulator_enable(st->vddio_supply);
+	if (result) {
+		dev_err(regmap_get_device(st->map),
+			"Failed to enable vddio regulator: %d\n", result);
+	} else {
+		/* Give the device a little bit of time to start up. */
+		usleep_range(3000, 5000);
+	}
+
+	return result;
+}
+
+static int inv_mpu_core_disable_regulator_vddio(struct inv_mpu6050_state *st)
+{
+	int result;
+
+	result = regulator_disable(st->vddio_supply);
+	if (result)
+		dev_err(regmap_get_device(st->map),
+			"Failed to disable vddio regulator: %d\n", result);
+
+	return result;
+}
+
+static void inv_mpu_core_disable_regulator_action(void *_data)
+{
+	struct inv_mpu6050_state *st = _data;
+	int result;
+
+	result = regulator_disable(st->vdd_supply);
+	if (result)
+		dev_err(regmap_get_device(st->map),
+			"Failed to disable vdd regulator: %d\n", result);
+
+	inv_mpu_core_disable_regulator_vddio(st);
+}
+
+static void inv_mpu_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_disable(dev);
+}
+
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+		int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type)
+{
+	struct inv_mpu6050_state *st;
+	struct iio_dev *indio_dev;
+	struct inv_mpu6050_platform_data *pdata;
+	struct device *dev = regmap_get_device(regmap);
+	int result;
+	struct irq_data *desc;
+	int irq_type;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	BUILD_BUG_ON(ARRAY_SIZE(hw_info) != INV_NUM_PARTS);
+	if (chip_type < 0 || chip_type >= INV_NUM_PARTS) {
+		dev_err(dev, "Bad invensense chip_type=%d name=%s\n",
+				chip_type, name);
+		return -ENODEV;
+	}
+	st = iio_priv(indio_dev);
+	mutex_init(&st->lock);
+	st->chip_type = chip_type;
+	st->irq = irq;
+	st->map = regmap;
+
+	pdata = dev_get_platdata(dev);
+	if (!pdata) {
+		result = iio_read_mount_matrix(dev, &st->orientation);
+		if (result) {
+			dev_err(dev, "Failed to retrieve mounting matrix %d\n",
+				result);
+			return result;
+		}
+	} else {
+		st->plat_data = *pdata;
+	}
+
+	if (irq > 0) {
+		desc = irq_get_irq_data(irq);
+		if (!desc) {
+			dev_err(dev, "Could not find IRQ %d\n", irq);
+			return -EINVAL;
+		}
+
+		irq_type = irqd_get_trigger_type(desc);
+		if (!irq_type)
+			irq_type = IRQF_TRIGGER_RISING;
+	} else {
+		/* Doesn't really matter, use the default */
+		irq_type = IRQF_TRIGGER_RISING;
+	}
+
+	if (irq_type & IRQF_TRIGGER_RISING)	// rising or both-edge
+		st->irq_mask = INV_MPU6050_ACTIVE_HIGH;
+	else if (irq_type == IRQF_TRIGGER_FALLING)
+		st->irq_mask = INV_MPU6050_ACTIVE_LOW;
+	else if (irq_type == IRQF_TRIGGER_HIGH)
+		st->irq_mask = INV_MPU6050_ACTIVE_HIGH |
+			INV_MPU6050_LATCH_INT_EN;
+	else if (irq_type == IRQF_TRIGGER_LOW)
+		st->irq_mask = INV_MPU6050_ACTIVE_LOW |
+			INV_MPU6050_LATCH_INT_EN;
+	else {
+		dev_err(dev, "Invalid interrupt type 0x%x specified\n",
+			irq_type);
+		return -EINVAL;
+	}
+
+	st->vdd_supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(st->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(st->vdd_supply),
+				     "Failed to get vdd regulator\n");
+
+	st->vddio_supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(st->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(st->vddio_supply),
+				     "Failed to get vddio regulator\n");
+
+	result = regulator_enable(st->vdd_supply);
+	if (result) {
+		dev_err(dev, "Failed to enable vdd regulator: %d\n", result);
+		return result;
+	}
+	msleep(INV_MPU6050_POWER_UP_TIME);
+
+	result = inv_mpu_core_enable_regulator_vddio(st);
+	if (result) {
+		regulator_disable(st->vdd_supply);
+		return result;
+	}
+
+	result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
+				 st);
+	if (result) {
+		dev_err(dev, "Failed to setup regulator cleanup action %d\n",
+			result);
+		return result;
+	}
+
+	/* fill magnetometer orientation */
+	result = inv_mpu_magn_set_orient(st);
+	if (result)
+		return result;
+
+	/* power is turned on inside check chip type*/
+	result = inv_check_and_setup_chip(st);
+	if (result)
+		return result;
+
+	result = inv_mpu6050_init_config(indio_dev);
+	if (result) {
+		dev_err(dev, "Could not initialize device.\n");
+		goto error_power_off;
+	}
+
+	dev_set_drvdata(dev, indio_dev);
+	/* name will be NULL when enumerated via ACPI */
+	if (name)
+		indio_dev->name = name;
+	else
+		indio_dev->name = dev_name(dev);
+
+	/* requires parent device set in indio_dev */
+	if (inv_mpu_bus_setup) {
+		result = inv_mpu_bus_setup(indio_dev);
+		if (result)
+			goto error_power_off;
+	}
+
+	/* chip init is done, turning on runtime power management */
+	result = pm_runtime_set_active(dev);
+	if (result)
+		goto error_power_off;
+	pm_runtime_get_noresume(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, INV_MPU6050_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put(dev);
+	result = devm_add_action_or_reset(dev, inv_mpu_pm_disable, dev);
+	if (result)
+		return result;
+
+	switch (chip_type) {
+	case INV_MPU9150:
+		indio_dev->channels = inv_mpu9150_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu9150_channels);
+		indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
+		break;
+	case INV_MPU9250:
+	case INV_MPU9255:
+		indio_dev->channels = inv_mpu9250_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu9250_channels);
+		indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
+		break;
+	case INV_ICM20600:
+	case INV_ICM20602:
+		indio_dev->channels = inv_mpu_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+		indio_dev->available_scan_masks = inv_icm20602_scan_masks;
+		break;
+	default:
+		indio_dev->channels = inv_mpu_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+		indio_dev->available_scan_masks = inv_mpu_scan_masks;
+		break;
+	}
+	/*
+	 * Use magnetometer inside the chip only if there is no i2c
+	 * auxiliary device in use. Otherwise Going back to 6-axis only.
+	 */
+	if (st->magn_disabled) {
+		indio_dev->channels = inv_mpu_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+		indio_dev->available_scan_masks = inv_mpu_scan_masks;
+	}
+
+	indio_dev->info = &mpu_info;
+
+	if (irq > 0) {
+		/*
+		 * The driver currently only supports buffered capture with its
+		 * own trigger. So no IRQ, no trigger, no buffer
+		 */
+		result = devm_iio_triggered_buffer_setup(dev, indio_dev,
+							 iio_pollfunc_store_time,
+							 inv_mpu6050_read_fifo,
+							 NULL);
+		if (result) {
+			dev_err(dev, "configure buffer fail %d\n", result);
+			return result;
+		}
+
+		result = inv_mpu6050_probe_trigger(indio_dev, irq_type);
+		if (result) {
+			dev_err(dev, "trigger probe fail %d\n", result);
+			return result;
+		}
+	}
+
+	result = devm_iio_device_register(dev, indio_dev);
+	if (result) {
+		dev_err(dev, "IIO register fail %d\n", result);
+		return result;
+	}
+
+	return 0;
+
+error_power_off:
+	inv_mpu6050_set_power_itg(st, false);
+	return result;
+}
+EXPORT_SYMBOL_NS_GPL(inv_mpu_core_probe, IIO_MPU6050);
+
+static int inv_mpu_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int result;
+
+	mutex_lock(&st->lock);
+	result = inv_mpu_core_enable_regulator_vddio(st);
+	if (result)
+		goto out_unlock;
+
+	result = inv_mpu6050_set_power_itg(st, true);
+	if (result)
+		goto out_unlock;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
+	if (result)
+		goto out_unlock;
+
+	if (iio_buffer_enabled(indio_dev))
+		result = inv_mpu6050_prepare_fifo(st, true);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+
+	return result;
+}
+
+static int inv_mpu_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int result;
+
+	mutex_lock(&st->lock);
+
+	st->suspended_sensors = 0;
+	if (pm_runtime_suspended(dev)) {
+		result = 0;
+		goto out_unlock;
+	}
+
+	if (iio_buffer_enabled(indio_dev)) {
+		result = inv_mpu6050_prepare_fifo(st, false);
+		if (result)
+			goto out_unlock;
+	}
+
+	if (st->chip_config.accl_en)
+		st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
+	if (st->chip_config.gyro_en)
+		st->suspended_sensors |= INV_MPU6050_SENSOR_GYRO;
+	if (st->chip_config.temp_en)
+		st->suspended_sensors |= INV_MPU6050_SENSOR_TEMP;
+	if (st->chip_config.magn_en)
+		st->suspended_sensors |= INV_MPU6050_SENSOR_MAGN;
+	result = inv_mpu6050_switch_engine(st, false, st->suspended_sensors);
+	if (result)
+		goto out_unlock;
+
+	result = inv_mpu6050_set_power_itg(st, false);
+	if (result)
+		goto out_unlock;
+
+	inv_mpu_core_disable_regulator_vddio(st);
+out_unlock:
+	mutex_unlock(&st->lock);
+
+	return result;
+}
+
+static int inv_mpu_runtime_suspend(struct device *dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+	unsigned int sensors;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	sensors = INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO |
+			INV_MPU6050_SENSOR_TEMP | INV_MPU6050_SENSOR_MAGN;
+	ret = inv_mpu6050_switch_engine(st, false, sensors);
+	if (ret)
+		goto out_unlock;
+
+	ret = inv_mpu6050_set_power_itg(st, false);
+	if (ret)
+		goto out_unlock;
+
+	inv_mpu_core_disable_regulator_vddio(st);
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int inv_mpu_runtime_resume(struct device *dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	ret = inv_mpu_core_enable_regulator_vddio(st);
+	if (ret)
+		return ret;
+
+	return inv_mpu6050_set_power_itg(st, true);
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_mpu_pmops, IIO_MPU6050) = {
+	SYSTEM_SLEEP_PM_OPS(inv_mpu_suspend, inv_mpu_resume)
+	RUNTIME_PM_OPS(inv_mpu_runtime_suspend, inv_mpu_runtime_resume, NULL)
+};
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_INV_SENSORS_TIMESTAMP);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
new file mode 100644
index 0000000000..410ea39fd4
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int inv_mpu6050_select_bypass(struct i2c_mux_core *muxc, u32 chan_id)
+{
+	return 0;
+}
+
+static bool inv_mpu_i2c_aux_bus(struct device *dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+
+	switch (st->chip_type) {
+	case INV_ICM20608:
+	case INV_ICM20608D:
+	case INV_ICM20609:
+	case INV_ICM20689:
+	case INV_ICM20600:
+	case INV_ICM20602:
+	case INV_IAM20680:
+		/* no i2c auxiliary bus on the chip */
+		return false;
+	case INV_MPU9150:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		if (st->magn_disabled)
+			return true;
+		else
+			return false;
+	default:
+		return true;
+	}
+}
+
+static int inv_mpu_i2c_aux_setup(struct iio_dev *indio_dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct fwnode_handle *mux_node;
+	int ret;
+
+	/*
+	 * MPU9xxx magnetometer support requires to disable i2c auxiliary bus.
+	 * To ensure backward compatibility with existing setups, do not disable
+	 * i2c auxiliary bus if it used.
+	 * Check for i2c-gate node in devicetree and set magnetometer disabled.
+	 * Only MPU6500 is supported by ACPI, no need to check.
+	 */
+	switch (st->chip_type) {
+	case INV_MPU9150:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		mux_node = device_get_named_child_node(dev, "i2c-gate");
+		if (mux_node != NULL) {
+			st->magn_disabled = true;
+			dev_warn(dev, "disable internal use of magnetometer\n");
+		}
+		fwnode_handle_put(mux_node);
+		break;
+	default:
+		break;
+	}
+
+	/* enable i2c bypass when using i2c auxiliary bus */
+	if (inv_mpu_i2c_aux_bus(dev)) {
+		ret = regmap_write(st->map, st->reg->int_pin_cfg,
+				   st->irq_mask | INV_MPU6050_BIT_BYPASS_EN);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ *  inv_mpu_probe() - probe function.
+ *  @client:          i2c client.
+ *
+ *  Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_mpu_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	const void *match;
+	struct inv_mpu6050_state *st;
+	int result;
+	enum inv_devices chip_type;
+	struct regmap *regmap;
+	const char *name;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EOPNOTSUPP;
+
+	match = device_get_match_data(&client->dev);
+	if (match) {
+		chip_type = (uintptr_t)match;
+		name = client->name;
+	} else if (id) {
+		chip_type = (enum inv_devices)
+			id->driver_data;
+		name = id->name;
+	} else {
+		return -ENOSYS;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	result = inv_mpu_core_probe(regmap, client->irq, name,
+				    inv_mpu_i2c_aux_setup, chip_type);
+	if (result < 0)
+		return result;
+
+	st = iio_priv(dev_get_drvdata(&client->dev));
+	if (inv_mpu_i2c_aux_bus(&client->dev)) {
+		/* declare i2c auxiliary bus */
+		st->muxc = i2c_mux_alloc(client->adapter, &client->dev,
+					 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+					 inv_mpu6050_select_bypass, NULL);
+		if (!st->muxc)
+			return -ENOMEM;
+		st->muxc->priv = dev_get_drvdata(&client->dev);
+		result = i2c_mux_add_adapter(st->muxc, 0, 0, 0);
+		if (result)
+			return result;
+		result = inv_mpu_acpi_create_mux_client(client);
+		if (result)
+			goto out_del_mux;
+	}
+
+	return 0;
+
+out_del_mux:
+	i2c_mux_del_adapters(st->muxc);
+	return result;
+}
+
+static void inv_mpu_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+	if (st->muxc) {
+		inv_mpu_acpi_delete_mux_client(client);
+		i2c_mux_del_adapters(st->muxc);
+	}
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_mpu_id[] = {
+	{"mpu6050", INV_MPU6050},
+	{"mpu6500", INV_MPU6500},
+	{"mpu6515", INV_MPU6515},
+	{"mpu6880", INV_MPU6880},
+	{"mpu9150", INV_MPU9150},
+	{"mpu9250", INV_MPU9250},
+	{"mpu9255", INV_MPU9255},
+	{"icm20608", INV_ICM20608},
+	{"icm20608d", INV_ICM20608D},
+	{"icm20609", INV_ICM20609},
+	{"icm20689", INV_ICM20689},
+	{"icm20600", INV_ICM20600},
+	{"icm20602", INV_ICM20602},
+	{"icm20690", INV_ICM20690},
+	{"iam20680", INV_IAM20680},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+
+static const struct of_device_id inv_of_match[] = {
+	{
+		.compatible = "invensense,mpu6050",
+		.data = (void *)INV_MPU6050
+	},
+	{
+		.compatible = "invensense,mpu6500",
+		.data = (void *)INV_MPU6500
+	},
+	{
+		.compatible = "invensense,mpu6515",
+		.data = (void *)INV_MPU6515
+	},
+	{
+		.compatible = "invensense,mpu6880",
+		.data = (void *)INV_MPU6880
+	},
+	{
+		.compatible = "invensense,mpu9150",
+		.data = (void *)INV_MPU9150
+	},
+	{
+		.compatible = "invensense,mpu9250",
+		.data = (void *)INV_MPU9250
+	},
+	{
+		.compatible = "invensense,mpu9255",
+		.data = (void *)INV_MPU9255
+	},
+	{
+		.compatible = "invensense,icm20608",
+		.data = (void *)INV_ICM20608
+	},
+	{
+		.compatible = "invensense,icm20608d",
+		.data = (void *)INV_ICM20608D
+	},
+	{
+		.compatible = "invensense,icm20609",
+		.data = (void *)INV_ICM20609
+	},
+	{
+		.compatible = "invensense,icm20689",
+		.data = (void *)INV_ICM20689
+	},
+	{
+		.compatible = "invensense,icm20600",
+		.data = (void *)INV_ICM20600
+	},
+	{
+		.compatible = "invensense,icm20602",
+		.data = (void *)INV_ICM20602
+	},
+	{
+		.compatible = "invensense,icm20690",
+		.data = (void *)INV_ICM20690
+	},
+	{
+		.compatible = "invensense,iam20680",
+		.data = (void *)INV_IAM20680
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, inv_of_match);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+	{"INVN6500", INV_MPU6500},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct i2c_driver inv_mpu_driver = {
+	.probe		=	inv_mpu_probe,
+	.remove		=	inv_mpu_remove,
+	.id_table	=	inv_mpu_id,
+	.driver = {
+		.of_match_table = inv_of_match,
+		.acpi_match_table = inv_acpi_match,
+		.name	=	"inv-mpu6050-i2c",
+		.pm     =       pm_ptr(&inv_mpu_pmops),
+	},
+};
+
+module_i2c_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_MPU6050);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
new file mode 100644
index 0000000000..ed5a96e78d
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -0,0 +1,474 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#ifndef INV_MPU_IIO_H_
+#define INV_MPU_IIO_H_
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/invensense_mpu6050.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/sysfs.h>
+
+/**
+ *  struct inv_mpu6050_reg_map - Notable registers.
+ *  @sample_rate_div:	Divider applied to gyro output rate.
+ *  @lpf:		Configures internal low pass filter.
+ *  @accel_lpf:		Configures accelerometer low pass filter.
+ *  @user_ctrl:		Enables/resets the FIFO.
+ *  @fifo_en:		Determines which data will appear in FIFO.
+ *  @gyro_config:	gyro config register.
+ *  @accl_config:	accel config register
+ *  @fifo_count_h:	Upper byte of FIFO count.
+ *  @fifo_r_w:		FIFO register.
+ *  @raw_gyro:		Address of first gyro register.
+ *  @raw_accl:		Address of first accel register.
+ *  @temperature:	temperature register
+ *  @int_enable:	Interrupt enable register.
+ *  @int_status:	Interrupt status register.
+ *  @pwr_mgmt_1:	Controls chip's power state and clock source.
+ *  @pwr_mgmt_2:	Controls power state of individual sensors.
+ *  @int_pin_cfg;	Controls interrupt pin configuration.
+ *  @accl_offset:	Controls the accelerometer calibration offset.
+ *  @gyro_offset:	Controls the gyroscope calibration offset.
+ *  @i2c_if:		Controls the i2c interface
+ */
+struct inv_mpu6050_reg_map {
+	u8 sample_rate_div;
+	u8 lpf;
+	u8 accel_lpf;
+	u8 user_ctrl;
+	u8 fifo_en;
+	u8 gyro_config;
+	u8 accl_config;
+	u8 fifo_count_h;
+	u8 fifo_r_w;
+	u8 raw_gyro;
+	u8 raw_accl;
+	u8 temperature;
+	u8 int_enable;
+	u8 int_status;
+	u8 pwr_mgmt_1;
+	u8 pwr_mgmt_2;
+	u8 int_pin_cfg;
+	u8 accl_offset;
+	u8 gyro_offset;
+	u8 i2c_if;
+};
+
+/*device enum */
+enum inv_devices {
+	INV_MPU6050,
+	INV_MPU6500,
+	INV_MPU6515,
+	INV_MPU6880,
+	INV_MPU6000,
+	INV_MPU9150,
+	INV_MPU9250,
+	INV_MPU9255,
+	INV_ICM20608,
+	INV_ICM20608D,
+	INV_ICM20609,
+	INV_ICM20689,
+	INV_ICM20600,
+	INV_ICM20602,
+	INV_ICM20690,
+	INV_IAM20680,
+	INV_NUM_PARTS
+};
+
+/* chip sensors mask: accelerometer, gyroscope, temperature, magnetometer */
+#define INV_MPU6050_SENSOR_ACCL		BIT(0)
+#define INV_MPU6050_SENSOR_GYRO		BIT(1)
+#define INV_MPU6050_SENSOR_TEMP		BIT(2)
+#define INV_MPU6050_SENSOR_MAGN		BIT(3)
+
+/**
+ *  struct inv_mpu6050_chip_config - Cached chip configuration data.
+ *  @clk:		selected chip clock
+ *  @fsr:		Full scale range.
+ *  @lpf:		Digital low pass filter frequency.
+ *  @accl_fs:		accel full scale range.
+ *  @accl_en:		accel engine enabled
+ *  @gyro_en:		gyro engine enabled
+ *  @temp_en:		temperature sensor enabled
+ *  @magn_en:		magn engine (i2c master) enabled
+ *  @accl_fifo_enable:	enable accel data output
+ *  @gyro_fifo_enable:	enable gyro data output
+ *  @temp_fifo_enable:	enable temp data output
+ *  @magn_fifo_enable:	enable magn data output
+ *  @divider:		chip sample rate divider (sample rate divider - 1)
+ */
+struct inv_mpu6050_chip_config {
+	unsigned int clk:3;
+	unsigned int fsr:2;
+	unsigned int lpf:3;
+	unsigned int accl_fs:2;
+	unsigned int accl_en:1;
+	unsigned int gyro_en:1;
+	unsigned int temp_en:1;
+	unsigned int magn_en:1;
+	unsigned int accl_fifo_enable:1;
+	unsigned int gyro_fifo_enable:1;
+	unsigned int temp_fifo_enable:1;
+	unsigned int magn_fifo_enable:1;
+	u8 divider;
+	u8 user_ctrl;
+};
+
+/*
+ * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8.
+ * May be less if fewer channels are enabled, as long as the timestamp
+ * remains 8 byte aligned
+ */
+#define INV_MPU6050_OUTPUT_DATA_SIZE         32
+
+/**
+ *  struct inv_mpu6050_hw - Other important hardware information.
+ *  @whoami:	Self identification byte from WHO_AM_I register
+ *  @name:      name of the chip.
+ *  @reg:   register map of the chip.
+ *  @config:    configuration of the chip.
+ *  @fifo_size:	size of the FIFO in bytes.
+ *  @temp:	offset and scale to apply to raw temperature.
+ */
+struct inv_mpu6050_hw {
+	u8 whoami;
+	u8 *name;
+	const struct inv_mpu6050_reg_map *reg;
+	const struct inv_mpu6050_chip_config *config;
+	size_t fifo_size;
+	struct {
+		int offset;
+		int scale;
+	} temp;
+	struct {
+		unsigned int accel;
+		unsigned int gyro;
+	} startup_time;
+};
+
+/*
+ *  struct inv_mpu6050_state - Driver state variables.
+ *  @lock:              Chip access lock.
+ *  @trig:              IIO trigger.
+ *  @chip_config:	Cached attribute information.
+ *  @reg:		Map of important registers.
+ *  @hw:		Other hardware-specific information.
+ *  @chip_type:		chip type.
+ *  @plat_data:		platform data (deprecated in favor of @orientation).
+ *  @orientation:	sensor chip orientation relative to main hardware.
+ *  @map		regmap pointer.
+ *  @irq		interrupt number.
+ *  @irq_mask		the int_pin_cfg mask to configure interrupt type.
+ *  @timestamp:		timestamping module
+ *  @vdd_supply:	VDD voltage regulator for the chip.
+ *  @vddio_supply	I/O voltage regulator for the chip.
+ *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
+ *  @magn_raw_to_gauss:	coefficient to convert mag raw value to Gauss.
+ *  @magn_orient:       magnetometer sensor chip orientation if available.
+ *  @suspended_sensors:	sensors mask of sensors turned off for suspend
+ *  @data:		read buffer used for bulk reads.
+ */
+struct inv_mpu6050_state {
+	struct mutex lock;
+	struct iio_trigger  *trig;
+	struct inv_mpu6050_chip_config chip_config;
+	const struct inv_mpu6050_reg_map *reg;
+	const struct inv_mpu6050_hw *hw;
+	enum   inv_devices chip_type;
+	struct i2c_mux_core *muxc;
+	struct i2c_client *mux_client;
+	struct inv_mpu6050_platform_data plat_data;
+	struct iio_mount_matrix orientation;
+	struct regmap *map;
+	int irq;
+	u8 irq_mask;
+	unsigned skip_samples;
+	struct inv_sensors_timestamp timestamp;
+	struct regulator *vdd_supply;
+	struct regulator *vddio_supply;
+	bool magn_disabled;
+	s32 magn_raw_to_gauss[3];
+	struct iio_mount_matrix magn_orient;
+	unsigned int suspended_sensors;
+	u8 *data;
+};
+
+/*register and associated bit definition*/
+#define INV_MPU6050_REG_ACCEL_OFFSET        0x06
+#define INV_MPU6050_REG_GYRO_OFFSET         0x13
+
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV     0x19
+#define INV_MPU6050_REG_CONFIG              0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG         0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG        0x1C
+
+#define INV_MPU6050_REG_FIFO_EN             0x23
+#define INV_MPU6050_BIT_SLAVE_0             0x01
+#define INV_MPU6050_BIT_SLAVE_1             0x02
+#define INV_MPU6050_BIT_SLAVE_2             0x04
+#define INV_MPU6050_BIT_ACCEL_OUT           0x08
+#define INV_MPU6050_BITS_GYRO_OUT           0x70
+#define INV_MPU6050_BIT_TEMP_OUT            0x80
+
+#define INV_MPU6050_REG_I2C_MST_CTRL        0x24
+#define INV_MPU6050_BITS_I2C_MST_CLK_400KHZ 0x0D
+#define INV_MPU6050_BIT_I2C_MST_P_NSR       0x10
+#define INV_MPU6050_BIT_SLV3_FIFO_EN        0x20
+#define INV_MPU6050_BIT_WAIT_FOR_ES         0x40
+#define INV_MPU6050_BIT_MULT_MST_EN         0x80
+
+/* control I2C slaves from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_ADDR(_x)    (0x25 + 3 * (_x))
+#define INV_MPU6050_BIT_I2C_SLV_RNW         0x80
+
+#define INV_MPU6050_REG_I2C_SLV_REG(_x)     (0x26 + 3 * (_x))
+
+#define INV_MPU6050_REG_I2C_SLV_CTRL(_x)    (0x27 + 3 * (_x))
+#define INV_MPU6050_BIT_SLV_GRP             0x10
+#define INV_MPU6050_BIT_SLV_REG_DIS         0x20
+#define INV_MPU6050_BIT_SLV_BYTE_SW         0x40
+#define INV_MPU6050_BIT_SLV_EN              0x80
+
+/* I2C master delay register */
+#define INV_MPU6050_REG_I2C_SLV4_CTRL       0x34
+#define INV_MPU6050_BITS_I2C_MST_DLY(_x)    ((_x) & 0x1F)
+
+#define INV_MPU6050_REG_I2C_MST_STATUS      0x36
+#define INV_MPU6050_BIT_I2C_SLV0_NACK       0x01
+#define INV_MPU6050_BIT_I2C_SLV1_NACK       0x02
+#define INV_MPU6050_BIT_I2C_SLV2_NACK       0x04
+#define INV_MPU6050_BIT_I2C_SLV3_NACK       0x08
+
+#define INV_MPU6050_REG_INT_ENABLE          0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN         0x01
+#define INV_MPU6050_BIT_DMP_INT_EN          0x02
+
+#define INV_MPU6050_REG_RAW_ACCEL           0x3B
+#define INV_MPU6050_REG_TEMPERATURE         0x41
+#define INV_MPU6050_REG_RAW_GYRO            0x43
+
+#define INV_MPU6050_REG_INT_STATUS          0x3A
+#define INV_MPU6050_BIT_FIFO_OVERFLOW_INT   0x10
+#define INV_MPU6050_BIT_RAW_DATA_RDY_INT    0x01
+
+#define INV_MPU6050_REG_EXT_SENS_DATA       0x49
+
+/* I2C slaves data output from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_DO(_x)      (0x63 + (_x))
+
+#define INV_MPU6050_REG_I2C_MST_DELAY_CTRL  0x67
+#define INV_MPU6050_BIT_I2C_SLV0_DLY_EN     0x01
+#define INV_MPU6050_BIT_I2C_SLV1_DLY_EN     0x02
+#define INV_MPU6050_BIT_I2C_SLV2_DLY_EN     0x04
+#define INV_MPU6050_BIT_I2C_SLV3_DLY_EN     0x08
+#define INV_MPU6050_BIT_DELAY_ES_SHADOW     0x80
+
+#define INV_MPU6050_REG_SIGNAL_PATH_RESET   0x68
+#define INV_MPU6050_BIT_TEMP_RST            BIT(0)
+#define INV_MPU6050_BIT_ACCEL_RST           BIT(1)
+#define INV_MPU6050_BIT_GYRO_RST            BIT(2)
+
+#define INV_MPU6050_REG_USER_CTRL           0x6A
+#define INV_MPU6050_BIT_SIG_COND_RST        0x01
+#define INV_MPU6050_BIT_FIFO_RST            0x04
+#define INV_MPU6050_BIT_DMP_RST             0x08
+#define INV_MPU6050_BIT_I2C_MST_EN          0x20
+#define INV_MPU6050_BIT_FIFO_EN             0x40
+#define INV_MPU6050_BIT_DMP_EN              0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS          0x10
+
+#define INV_MPU6050_REG_PWR_MGMT_1          0x6B
+#define INV_MPU6050_BIT_H_RESET             0x80
+#define INV_MPU6050_BIT_SLEEP               0x40
+#define INV_MPU6050_BIT_TEMP_DIS            0x08
+#define INV_MPU6050_BIT_CLK_MASK            0x7
+
+#define INV_MPU6050_REG_PWR_MGMT_2          0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY       0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY       0x07
+
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF             0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS         0x40
+
+#define INV_MPU6050_REG_FIFO_COUNT_H        0x72
+#define INV_MPU6050_REG_FIFO_R_W            0x74
+
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR   6
+#define INV_MPU6050_FIFO_COUNT_BYTE          2
+
+/* MPU9X50 9-axis magnetometer */
+#define INV_MPU9X50_BYTES_MAGN               7
+
+/* FIFO temperature sample size */
+#define INV_MPU6050_BYTES_PER_TEMP_SENSOR   2
+
+/* mpu6500 registers */
+#define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
+#define INV_ICM20689_BITS_FIFO_SIZE_MAX     0xC0
+#define INV_MPU6500_REG_ACCEL_OFFSET        0x77
+
+/* delay time in milliseconds */
+#define INV_MPU6050_POWER_UP_TIME            100
+#define INV_MPU6050_TEMP_UP_TIME             100
+#define INV_MPU6050_ACCEL_STARTUP_TIME       20
+#define INV_MPU6050_GYRO_STARTUP_TIME        60
+#define INV_MPU6050_GYRO_DOWN_TIME           150
+#define INV_MPU6050_SUSPEND_DELAY_MS         2000
+
+#define INV_MPU6500_GYRO_STARTUP_TIME        70
+#define INV_MPU6500_ACCEL_STARTUP_TIME       30
+
+#define INV_ICM20602_GYRO_STARTUP_TIME       100
+#define INV_ICM20602_ACCEL_STARTUP_TIME      20
+
+#define INV_ICM20690_GYRO_STARTUP_TIME       80
+#define INV_ICM20690_ACCEL_STARTUP_TIME      10
+
+
+/* delay time in microseconds */
+#define INV_MPU6050_REG_UP_TIME_MIN          5000
+#define INV_MPU6050_REG_UP_TIME_MAX          10000
+
+#define INV_MPU6050_TEMP_OFFSET	             12420
+#define INV_MPU6050_TEMP_SCALE               2941176
+#define INV_MPU6050_MAX_GYRO_FS_PARAM        3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM        3
+#define INV_MPU6050_THREE_AXIS               3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT    3
+#define INV_ICM20690_GYRO_CONFIG_FSR_SHIFT   2
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT    3
+
+#define INV_MPU6500_TEMP_OFFSET              7011
+#define INV_MPU6500_TEMP_SCALE               2995178
+
+#define INV_ICM20608_TEMP_OFFSET	     8170
+#define INV_ICM20608_TEMP_SCALE		     3059976
+
+#define INV_MPU6050_REG_INT_PIN_CFG	0x37
+#define INV_MPU6050_ACTIVE_HIGH		0x00
+#define INV_MPU6050_ACTIVE_LOW		0x80
+/* enable level triggering */
+#define INV_MPU6050_LATCH_INT_EN	0x20
+#define INV_MPU6050_BIT_BYPASS_EN	0x2
+
+/* Allowed timestamp period jitter in percent */
+#define INV_MPU6050_TS_PERIOD_JITTER	4
+
+/* init parameters */
+#define INV_MPU6050_MAX_FIFO_RATE            1000
+#define INV_MPU6050_MIN_FIFO_RATE            4
+
+/* chip internal frequency: 1KHz */
+#define INV_MPU6050_INTERNAL_FREQ_HZ		1000
+/* return the frequency divider (chip sample rate divider + 1) */
+#define INV_MPU6050_FREQ_DIVIDER(st)					\
+	((st)->chip_config.divider + 1)
+/* chip sample rate divider to fifo rate */
+#define INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate)			\
+	((INV_MPU6050_INTERNAL_FREQ_HZ / (fifo_rate)) - 1)
+#define INV_MPU6050_DIVIDER_TO_FIFO_RATE(divider)			\
+	(INV_MPU6050_INTERNAL_FREQ_HZ / ((divider) + 1))
+
+#define INV_MPU6050_REG_WHOAMI			117
+
+#define INV_MPU6000_WHOAMI_VALUE		0x68
+#define INV_MPU6050_WHOAMI_VALUE		0x68
+#define INV_MPU6500_WHOAMI_VALUE		0x70
+#define INV_MPU6880_WHOAMI_VALUE		0x78
+#define INV_MPU9150_WHOAMI_VALUE		0x68
+#define INV_MPU9250_WHOAMI_VALUE		0x71
+#define INV_MPU9255_WHOAMI_VALUE		0x73
+#define INV_MPU6515_WHOAMI_VALUE		0x74
+#define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20608D_WHOAMI_VALUE		0xAE
+#define INV_ICM20609_WHOAMI_VALUE		0xA6
+#define INV_ICM20689_WHOAMI_VALUE		0x98
+#define INV_ICM20600_WHOAMI_VALUE		0x11
+#define INV_ICM20602_WHOAMI_VALUE		0x12
+#define INV_ICM20690_WHOAMI_VALUE		0x20
+#define INV_IAM20680_WHOAMI_VALUE		0xA9
+
+/* scan element definition for generic MPU6xxx devices */
+enum inv_mpu6050_scan {
+	INV_MPU6050_SCAN_ACCL_X,
+	INV_MPU6050_SCAN_ACCL_Y,
+	INV_MPU6050_SCAN_ACCL_Z,
+	INV_MPU6050_SCAN_TEMP,
+	INV_MPU6050_SCAN_GYRO_X,
+	INV_MPU6050_SCAN_GYRO_Y,
+	INV_MPU6050_SCAN_GYRO_Z,
+	INV_MPU6050_SCAN_TIMESTAMP,
+
+	INV_MPU9X50_SCAN_MAGN_X = INV_MPU6050_SCAN_GYRO_Z + 1,
+	INV_MPU9X50_SCAN_MAGN_Y,
+	INV_MPU9X50_SCAN_MAGN_Z,
+	INV_MPU9X50_SCAN_TIMESTAMP,
+};
+
+enum inv_mpu6050_filter_e {
+	INV_MPU6050_FILTER_NOLPF2 = 0,
+	INV_MPU6050_FILTER_200HZ,
+	INV_MPU6050_FILTER_100HZ,
+	INV_MPU6050_FILTER_45HZ,
+	INV_MPU6050_FILTER_20HZ,
+	INV_MPU6050_FILTER_10HZ,
+	INV_MPU6050_FILTER_5HZ,
+	INV_MPU6050_FILTER_NOLPF,
+	NUM_MPU6050_FILTER
+};
+
+/* IIO attribute address */
+enum INV_MPU6050_IIO_ATTR_ADDR {
+	ATTR_GYRO_MATRIX,
+	ATTR_ACCL_MATRIX,
+};
+
+enum inv_mpu6050_accl_fs_e {
+	INV_MPU6050_FS_02G = 0,
+	INV_MPU6050_FS_04G,
+	INV_MPU6050_FS_08G,
+	INV_MPU6050_FS_16G,
+	NUM_ACCL_FSR
+};
+
+enum inv_mpu6050_fsr_e {
+	INV_MPU6050_FSR_250DPS = 0,
+	INV_MPU6050_FSR_500DPS,
+	INV_MPU6050_FSR_1000DPS,
+	INV_MPU6050_FSR_2000DPS,
+	NUM_MPU6050_FSR
+};
+
+enum inv_mpu6050_clock_sel_e {
+	INV_CLK_INTERNAL = 0,
+	INV_CLK_PLL,
+	NUM_CLK
+};
+
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type);
+int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable);
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en,
+			      unsigned int mask);
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+		int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type);
+extern const struct dev_pm_ops inv_mpu_pmops;
+
+#endif
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
new file mode 100644
index 0000000000..6aee6c9894
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/string.h>
+
+#include "inv_mpu_aux.h"
+#include "inv_mpu_iio.h"
+#include "inv_mpu_magn.h"
+
+/*
+ * MPU9xxx magnetometer are AKM chips on I2C aux bus
+ * MPU9150 is AK8975
+ * MPU9250 is AK8963
+ */
+#define INV_MPU_MAGN_I2C_ADDR		0x0C
+
+#define INV_MPU_MAGN_REG_WIA		0x00
+#define INV_MPU_MAGN_BITS_WIA		0x48
+
+#define INV_MPU_MAGN_REG_ST1		0x02
+#define INV_MPU_MAGN_BIT_DRDY		0x01
+#define INV_MPU_MAGN_BIT_DOR		0x02
+
+#define INV_MPU_MAGN_REG_DATA		0x03
+
+#define INV_MPU_MAGN_REG_ST2		0x09
+#define INV_MPU_MAGN_BIT_HOFL		0x08
+#define INV_MPU_MAGN_BIT_BITM		0x10
+
+#define INV_MPU_MAGN_REG_CNTL1		0x0A
+#define INV_MPU_MAGN_BITS_MODE_PWDN	0x00
+#define INV_MPU_MAGN_BITS_MODE_SINGLE	0x01
+#define INV_MPU_MAGN_BITS_MODE_FUSE	0x0F
+#define INV_MPU9250_MAGN_BIT_OUTPUT_BIT	0x10
+
+#define INV_MPU9250_MAGN_REG_CNTL2	0x0B
+#define INV_MPU9250_MAGN_BIT_SRST	0x01
+
+#define INV_MPU_MAGN_REG_ASAX		0x10
+#define INV_MPU_MAGN_REG_ASAY		0x11
+#define INV_MPU_MAGN_REG_ASAZ		0x12
+
+static bool inv_magn_supported(const struct inv_mpu6050_state *st)
+{
+	switch (st->chip_type) {
+	case INV_MPU9150:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/* init magnetometer chip */
+static int inv_magn_init(struct inv_mpu6050_state *st)
+{
+	uint8_t val;
+	uint8_t asa[3];
+	int32_t sensitivity;
+	int ret;
+
+	/* check whoami */
+	ret = inv_mpu_aux_read(st, INV_MPU_MAGN_I2C_ADDR, INV_MPU_MAGN_REG_WIA,
+			       &val, sizeof(val));
+	if (ret)
+		return ret;
+	if (val != INV_MPU_MAGN_BITS_WIA)
+		return -ENODEV;
+
+	/* software reset for MPU925x only */
+	switch (st->chip_type) {
+	case INV_MPU9250:
+	case INV_MPU9255:
+		ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+					INV_MPU9250_MAGN_REG_CNTL2,
+					INV_MPU9250_MAGN_BIT_SRST);
+		if (ret)
+			return ret;
+		break;
+	default:
+		break;
+	}
+
+	/* read fuse ROM data */
+	ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+				INV_MPU_MAGN_REG_CNTL1,
+				INV_MPU_MAGN_BITS_MODE_FUSE);
+	if (ret)
+		return ret;
+
+	ret = inv_mpu_aux_read(st, INV_MPU_MAGN_I2C_ADDR, INV_MPU_MAGN_REG_ASAX,
+			       asa, sizeof(asa));
+	if (ret)
+		return ret;
+
+	/* switch back to power-down */
+	ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+				INV_MPU_MAGN_REG_CNTL1,
+				INV_MPU_MAGN_BITS_MODE_PWDN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Sensor sentivity
+	 * 1 uT = 0.01 G and value is in micron (1e6)
+	 * sensitvity = x uT * 0.01 * 1e6
+	 */
+	switch (st->chip_type) {
+	case INV_MPU9150:
+		/* sensor sensitivity is 0.3 uT */
+		sensitivity = 3000;
+		break;
+	case INV_MPU9250:
+	case INV_MPU9255:
+		/* sensor sensitivity in 16 bits mode: 0.15 uT */
+		sensitivity = 1500;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Sensitivity adjustement and scale to Gauss
+	 *
+	 * Hadj = H * (((ASA - 128) * 0.5 / 128) + 1)
+	 * Factor simplification:
+	 * Hadj = H * ((ASA + 128) / 256)
+	 *
+	 * raw_to_gauss = Hadj * sensitivity
+	 */
+	st->magn_raw_to_gauss[0] = (((int32_t)asa[0] + 128) * sensitivity) / 256;
+	st->magn_raw_to_gauss[1] = (((int32_t)asa[1] + 128) * sensitivity) / 256;
+	st->magn_raw_to_gauss[2] = (((int32_t)asa[2] + 128) * sensitivity) / 256;
+
+	return 0;
+}
+
+/**
+ * inv_mpu_magn_probe() - probe and setup magnetometer chip
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * It is probing the chip and setting up all needed i2c transfers.
+ * Noop if there is no magnetometer in the chip.
+ */
+int inv_mpu_magn_probe(struct inv_mpu6050_state *st)
+{
+	uint8_t val;
+	int ret;
+
+	/* quit if chip is not supported */
+	if (!inv_magn_supported(st))
+		return 0;
+
+	/* configure i2c master aux port */
+	ret = inv_mpu_aux_init(st);
+	if (ret)
+		return ret;
+
+	/* check and init mag chip */
+	ret = inv_magn_init(st);
+	if (ret)
+		return ret;
+
+	/*
+	 * configure mpu i2c master accesses
+	 * i2c SLV0: read sensor data, 7 bytes data(6)-ST2
+	 * Byte swap data to store them in big-endian in impair address groups
+	 */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0),
+			   INV_MPU6050_BIT_I2C_SLV_RNW | INV_MPU_MAGN_I2C_ADDR);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0),
+			   INV_MPU_MAGN_REG_DATA);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+			   INV_MPU6050_BIT_SLV_EN |
+			   INV_MPU6050_BIT_SLV_BYTE_SW |
+			   INV_MPU6050_BIT_SLV_GRP |
+			   INV_MPU9X50_BYTES_MAGN);
+	if (ret)
+		return ret;
+
+	/* i2c SLV1: launch single measurement */
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(1),
+			   INV_MPU_MAGN_I2C_ADDR);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(1),
+			   INV_MPU_MAGN_REG_CNTL1);
+	if (ret)
+		return ret;
+
+	/* add 16 bits mode for MPU925x */
+	val = INV_MPU_MAGN_BITS_MODE_SINGLE;
+	switch (st->chip_type) {
+	case INV_MPU9250:
+	case INV_MPU9255:
+		val |= INV_MPU9250_MAGN_BIT_OUTPUT_BIT;
+		break;
+	default:
+		break;
+	}
+	ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(1), val);
+	if (ret)
+		return ret;
+
+	return regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(1),
+			    INV_MPU6050_BIT_SLV_EN | 1);
+}
+
+/**
+ * inv_mpu_magn_set_rate() - set magnetometer sampling rate
+ * @st: driver internal state
+ * @fifo_rate: mpu set fifo rate
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * Limit sampling frequency to the maximum value supported by the
+ * magnetometer chip. Resulting in duplicated data for higher frequencies.
+ * Noop if there is no magnetometer in the chip.
+ */
+int inv_mpu_magn_set_rate(const struct inv_mpu6050_state *st, int fifo_rate)
+{
+	uint8_t d;
+
+	/* quit if chip is not supported */
+	if (!inv_magn_supported(st))
+		return 0;
+
+	/*
+	 * update i2c master delay to limit mag sampling to max frequency
+	 * compute fifo_rate divider d: rate = fifo_rate / (d + 1)
+	 */
+	if (fifo_rate > INV_MPU_MAGN_FREQ_HZ_MAX)
+		d = fifo_rate / INV_MPU_MAGN_FREQ_HZ_MAX - 1;
+	else
+		d = 0;
+
+	return regmap_write(st->map, INV_MPU6050_REG_I2C_SLV4_CTRL, d);
+}
+
+/**
+ * inv_mpu_magn_set_orient() - fill magnetometer mounting matrix
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * Fill magnetometer mounting matrix using the provided chip matrix.
+ */
+int inv_mpu_magn_set_orient(struct inv_mpu6050_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *orient;
+	char *str;
+	int i;
+
+	/* fill magnetometer orientation */
+	switch (st->chip_type) {
+	case INV_MPU9150:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		/* x <- y */
+		st->magn_orient.rotation[0] = st->orientation.rotation[3];
+		st->magn_orient.rotation[1] = st->orientation.rotation[4];
+		st->magn_orient.rotation[2] = st->orientation.rotation[5];
+		/* y <- x */
+		st->magn_orient.rotation[3] = st->orientation.rotation[0];
+		st->magn_orient.rotation[4] = st->orientation.rotation[1];
+		st->magn_orient.rotation[5] = st->orientation.rotation[2];
+		/* z <- -z */
+		for (i = 6; i < 9; ++i) {
+			orient = st->orientation.rotation[i];
+
+			/*
+			 * The value is negated according to one of the following
+			 * rules:
+			 *
+			 * 1) Drop leading minus.
+			 * 2) Leave 0 as is.
+			 * 3) Add leading minus.
+			 */
+			if (orient[0] == '-')
+				str = devm_kstrdup(dev, orient + 1, GFP_KERNEL);
+			else if (!strcmp(orient, "0"))
+				str = devm_kstrdup(dev, orient, GFP_KERNEL);
+			else
+				str = devm_kasprintf(dev, GFP_KERNEL, "-%s", orient);
+			if (!str)
+				return -ENOMEM;
+
+			st->magn_orient.rotation[i] = str;
+		}
+		break;
+	default:
+		st->magn_orient = st->orientation;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * inv_mpu_magn_read() - read magnetometer data
+ * @st: driver internal state
+ * @axis: IIO modifier axis value
+ * @val: store corresponding axis value
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int inv_mpu_magn_read(struct inv_mpu6050_state *st, int axis, int *val)
+{
+	unsigned int status;
+	__be16 data;
+	uint8_t addr;
+	int ret;
+
+	/* quit if chip is not supported */
+	if (!inv_magn_supported(st))
+		return -ENODEV;
+
+	/* Mag data: XH,XL,YH,YL,ZH,ZL */
+	switch (axis) {
+	case IIO_MOD_X:
+		addr = 0;
+		break;
+	case IIO_MOD_Y:
+		addr = 2;
+		break;
+	case IIO_MOD_Z:
+		addr = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+	addr += INV_MPU6050_REG_EXT_SENS_DATA;
+
+	/* check i2c status and read raw data */
+	ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+	if (ret)
+		return ret;
+
+	if (status & INV_MPU6050_BIT_I2C_SLV0_NACK ||
+			status & INV_MPU6050_BIT_I2C_SLV1_NACK)
+		return -EIO;
+
+	ret = regmap_bulk_read(st->map, addr, &data, sizeof(data));
+	if (ret)
+		return ret;
+
+	*val = (int16_t)be16_to_cpu(data);
+
+	return IIO_VAL_INT;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h
new file mode 100644
index 0000000000..185c000c69
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#ifndef INV_MPU_MAGN_H_
+#define INV_MPU_MAGN_H_
+
+#include <linux/kernel.h>
+
+#include "inv_mpu_iio.h"
+
+/* Magnetometer maximum frequency */
+#define INV_MPU_MAGN_FREQ_HZ_MAX	50
+
+int inv_mpu_magn_probe(struct inv_mpu6050_state *st);
+
+/**
+ * inv_mpu_magn_get_scale() - get magnetometer scale value
+ * @st: driver internal state
+ *
+ * Returns IIO data format.
+ */
+static inline int inv_mpu_magn_get_scale(const struct inv_mpu6050_state *st,
+					 const struct iio_chan_spec *chan,
+					 int *val, int *val2)
+{
+	*val = 0;
+	*val2 = st->magn_raw_to_gauss[chan->address];
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+int inv_mpu_magn_set_rate(const struct inv_mpu6050_state *st, int fifo_rate);
+
+int inv_mpu_magn_set_orient(struct inv_mpu6050_state *st);
+
+int inv_mpu_magn_read(struct inv_mpu6050_state *st, int axis, int *val);
+
+#endif		/* INV_MPU_MAGN_H_ */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
new file mode 100644
index 0000000000..66d4ba088e
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/math64.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+
+#include "inv_mpu_iio.h"
+
+static int inv_reset_fifo(struct iio_dev *indio_dev)
+{
+	int result;
+	struct inv_mpu6050_state  *st = iio_priv(indio_dev);
+
+	/* disable fifo and reenable it */
+	inv_mpu6050_prepare_fifo(st, false);
+	result = inv_mpu6050_prepare_fifo(st, true);
+	if (result)
+		goto reset_fifo_fail;
+
+	return 0;
+
+reset_fifo_fail:
+	dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
+	result = regmap_write(st->map, st->reg->int_enable,
+			      INV_MPU6050_BIT_DATA_RDY_EN);
+
+	return result;
+}
+
+/*
+ * inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO.
+ */
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	size_t bytes_per_datum;
+	int result;
+	u16 fifo_count;
+	u32 fifo_period;
+	s64 timestamp;
+	u8 data[INV_MPU6050_OUTPUT_DATA_SIZE];
+	int int_status;
+	size_t i, nb;
+
+	mutex_lock(&st->lock);
+
+	/* ack interrupt and check status */
+	result = regmap_read(st->map, st->reg->int_status, &int_status);
+	if (result) {
+		dev_err(regmap_get_device(st->map),
+			"failed to ack interrupt\n");
+		goto flush_fifo;
+	}
+	if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT))
+		goto end_session;
+
+	if (!(st->chip_config.accl_fifo_enable |
+		st->chip_config.gyro_fifo_enable |
+		st->chip_config.magn_fifo_enable))
+		goto end_session;
+	bytes_per_datum = 0;
+	if (st->chip_config.accl_fifo_enable)
+		bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+	if (st->chip_config.gyro_fifo_enable)
+		bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+	if (st->chip_config.temp_fifo_enable)
+		bytes_per_datum += INV_MPU6050_BYTES_PER_TEMP_SENSOR;
+
+	if (st->chip_config.magn_fifo_enable)
+		bytes_per_datum += INV_MPU9X50_BYTES_MAGN;
+
+	/*
+	 * read fifo_count register to know how many bytes are inside the FIFO
+	 * right now
+	 */
+	result = regmap_bulk_read(st->map, st->reg->fifo_count_h,
+				  st->data, INV_MPU6050_FIFO_COUNT_BYTE);
+	if (result)
+		goto end_session;
+	fifo_count = be16_to_cpup((__be16 *)&st->data[0]);
+
+	/*
+	 * Handle fifo overflow by resetting fifo.
+	 * Reset if there is only 3 data set free remaining to mitigate
+	 * possible delay between reading fifo count and fifo data.
+	 */
+	nb = 3 * bytes_per_datum;
+	if (fifo_count >= st->hw->fifo_size - nb) {
+		dev_warn(regmap_get_device(st->map), "fifo overflow reset\n");
+		goto flush_fifo;
+	}
+
+	/* compute and process only all complete datum */
+	nb = fifo_count / bytes_per_datum;
+	fifo_count = nb * bytes_per_datum;
+	/* Each FIFO data contains all sensors, so same number for FIFO and sensor data */
+	fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	inv_sensors_timestamp_interrupt(&st->timestamp, fifo_period, nb, nb, pf->timestamp);
+	inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, nb, 0);
+
+	/* clear internal data buffer for avoiding kernel data leak */
+	memset(data, 0, sizeof(data));
+
+	/* read all data once and process every samples */
+	result = regmap_noinc_read(st->map, st->reg->fifo_r_w, st->data, fifo_count);
+	if (result)
+		goto flush_fifo;
+	for (i = 0; i < nb; ++i) {
+		/* skip first samples if needed */
+		if (st->skip_samples) {
+			st->skip_samples--;
+			continue;
+		}
+		memcpy(data, &st->data[i * bytes_per_datum], bytes_per_datum);
+		timestamp = inv_sensors_timestamp_pop(&st->timestamp);
+		iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
+	}
+
+end_session:
+	mutex_unlock(&st->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+
+flush_fifo:
+	/* Flush HW and SW FIFOs. */
+	inv_reset_fifo(indio_dev);
+	mutex_unlock(&st->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
new file mode 100644
index 0000000000..05451ca158
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2015 Intel Corporation Inc.
+*/
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (st->reg->i2c_if) {
+		ret = regmap_write(st->map, st->reg->i2c_if,
+				   INV_ICM20602_BIT_I2C_IF_DIS);
+	} else {
+		st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
+		ret = regmap_write(st->map, st->reg->user_ctrl,
+				   st->chip_config.user_ctrl);
+	}
+
+	return ret;
+}
+
+static int inv_mpu_probe(struct spi_device *spi)
+{
+	const void *match;
+	struct regmap *regmap;
+	const struct spi_device_id *spi_id;
+	const char *name = NULL;
+	enum inv_devices chip_type;
+
+	if ((spi_id = spi_get_device_id(spi))) {
+		chip_type = (enum inv_devices)spi_id->driver_data;
+		name = spi_id->name;
+	} else if ((match = device_get_match_data(&spi->dev))) {
+		chip_type = (uintptr_t)match;
+		name = dev_name(&spi->dev);
+	} else {
+		return -ENODEV;
+	}
+
+	regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	return inv_mpu_core_probe(regmap, spi->irq, name,
+				  inv_mpu_i2c_disable, chip_type);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct spi_device_id inv_mpu_id[] = {
+	{"mpu6000", INV_MPU6000},
+	{"mpu6500", INV_MPU6500},
+	{"mpu6515", INV_MPU6515},
+	{"mpu6880", INV_MPU6880},
+	{"mpu9250", INV_MPU9250},
+	{"mpu9255", INV_MPU9255},
+	{"icm20608", INV_ICM20608},
+	{"icm20608d", INV_ICM20608D},
+	{"icm20609", INV_ICM20609},
+	{"icm20689", INV_ICM20689},
+	{"icm20600", INV_ICM20600},
+	{"icm20602", INV_ICM20602},
+	{"icm20690", INV_ICM20690},
+	{"iam20680", INV_IAM20680},
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, inv_mpu_id);
+
+static const struct of_device_id inv_of_match[] = {
+	{
+		.compatible = "invensense,mpu6000",
+		.data = (void *)INV_MPU6000
+	},
+	{
+		.compatible = "invensense,mpu6500",
+		.data = (void *)INV_MPU6500
+	},
+	{
+		.compatible = "invensense,mpu6515",
+		.data = (void *)INV_MPU6515
+	},
+	{
+		.compatible = "invensense,mpu6880",
+		.data = (void *)INV_MPU6880
+	},
+	{
+		.compatible = "invensense,mpu9250",
+		.data = (void *)INV_MPU9250
+	},
+	{
+		.compatible = "invensense,mpu9255",
+		.data = (void *)INV_MPU9255
+	},
+	{
+		.compatible = "invensense,icm20608",
+		.data = (void *)INV_ICM20608
+	},
+	{
+		.compatible = "invensense,icm20608d",
+		.data = (void *)INV_ICM20608D
+	},
+	{
+		.compatible = "invensense,icm20609",
+		.data = (void *)INV_ICM20609
+	},
+	{
+		.compatible = "invensense,icm20689",
+		.data = (void *)INV_ICM20689
+	},
+	{
+		.compatible = "invensense,icm20600",
+		.data = (void *)INV_ICM20600
+	},
+	{
+		.compatible = "invensense,icm20602",
+		.data = (void *)INV_ICM20602
+	},
+	{
+		.compatible = "invensense,icm20690",
+		.data = (void *)INV_ICM20690
+	},
+	{
+		.compatible = "invensense,iam20680",
+		.data = (void *)INV_IAM20680
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, inv_of_match);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+	{"INVN6000", INV_MPU6000},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct spi_driver inv_mpu_driver = {
+	.probe		=	inv_mpu_probe,
+	.id_table	=	inv_mpu_id,
+	.driver = {
+		.of_match_table = inv_of_match,
+		.acpi_match_table = inv_acpi_match,
+		.name	=	"inv-mpu6000-spi",
+		.pm     =       pm_ptr(&inv_mpu_pmops),
+	},
+};
+
+module_spi_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Adriana Reus <adriana.reus@intel.com>");
+MODULE_DESCRIPTION("Invensense device MPU6000 driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_MPU6050);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
new file mode 100644
index 0000000000..676704f915
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/pm_runtime.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+
+#include "inv_mpu_iio.h"
+
+static unsigned int inv_scan_query_mpu6050(struct iio_dev *indio_dev)
+{
+	struct inv_mpu6050_state  *st = iio_priv(indio_dev);
+	unsigned int mask;
+
+	/*
+	 * If the MPU6050 is just used as a trigger, then the scan mask
+	 * is not allocated so we simply enable the temperature channel
+	 * as a dummy and bail out.
+	 */
+	if (!indio_dev->active_scan_mask) {
+		st->chip_config.temp_fifo_enable = true;
+		return INV_MPU6050_SENSOR_TEMP;
+	}
+
+	st->chip_config.gyro_fifo_enable =
+		test_bit(INV_MPU6050_SCAN_GYRO_X,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU6050_SCAN_GYRO_Y,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU6050_SCAN_GYRO_Z,
+			 indio_dev->active_scan_mask);
+
+	st->chip_config.accl_fifo_enable =
+		test_bit(INV_MPU6050_SCAN_ACCL_X,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU6050_SCAN_ACCL_Y,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU6050_SCAN_ACCL_Z,
+			 indio_dev->active_scan_mask);
+
+	st->chip_config.temp_fifo_enable =
+		test_bit(INV_MPU6050_SCAN_TEMP, indio_dev->active_scan_mask);
+
+	mask = 0;
+	if (st->chip_config.gyro_fifo_enable)
+		mask |= INV_MPU6050_SENSOR_GYRO;
+	if (st->chip_config.accl_fifo_enable)
+		mask |= INV_MPU6050_SENSOR_ACCL;
+	if (st->chip_config.temp_fifo_enable)
+		mask |= INV_MPU6050_SENSOR_TEMP;
+
+	return mask;
+}
+
+static unsigned int inv_scan_query_mpu9x50(struct iio_dev *indio_dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	unsigned int mask;
+
+	mask = inv_scan_query_mpu6050(indio_dev);
+
+	/* no magnetometer if i2c auxiliary bus is used */
+	if (st->magn_disabled)
+		return mask;
+
+	st->chip_config.magn_fifo_enable =
+		test_bit(INV_MPU9X50_SCAN_MAGN_X,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU9X50_SCAN_MAGN_Y,
+			 indio_dev->active_scan_mask) ||
+		test_bit(INV_MPU9X50_SCAN_MAGN_Z,
+			 indio_dev->active_scan_mask);
+	if (st->chip_config.magn_fifo_enable)
+		mask |= INV_MPU6050_SENSOR_MAGN;
+
+	return mask;
+}
+
+static unsigned int inv_scan_query(struct iio_dev *indio_dev)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+	switch (st->chip_type) {
+	case INV_MPU9150:
+	case INV_MPU9250:
+	case INV_MPU9255:
+		return inv_scan_query_mpu9x50(indio_dev);
+	default:
+		return inv_scan_query_mpu6050(indio_dev);
+	}
+}
+
+static unsigned int inv_compute_skip_samples(const struct inv_mpu6050_state *st)
+{
+	unsigned int skip_samples = 0;
+
+	/* mag first sample is always not ready, skip it */
+	if (st->chip_config.magn_fifo_enable)
+		skip_samples = 1;
+
+	return skip_samples;
+}
+
+int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
+{
+	uint8_t d;
+	int ret;
+
+	if (enable) {
+		/* reset timestamping */
+		inv_sensors_timestamp_reset(&st->timestamp);
+		/* reset FIFO */
+		d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
+		ret = regmap_write(st->map, st->reg->user_ctrl, d);
+		if (ret)
+			return ret;
+		/* enable sensor output to FIFO */
+		d = 0;
+		if (st->chip_config.gyro_fifo_enable)
+			d |= INV_MPU6050_BITS_GYRO_OUT;
+		if (st->chip_config.accl_fifo_enable)
+			d |= INV_MPU6050_BIT_ACCEL_OUT;
+		if (st->chip_config.temp_fifo_enable)
+			d |= INV_MPU6050_BIT_TEMP_OUT;
+		if (st->chip_config.magn_fifo_enable)
+			d |= INV_MPU6050_BIT_SLAVE_0;
+		ret = regmap_write(st->map, st->reg->fifo_en, d);
+		if (ret)
+			return ret;
+		/* enable FIFO reading */
+		d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN;
+		ret = regmap_write(st->map, st->reg->user_ctrl, d);
+		if (ret)
+			return ret;
+		/* enable interrupt */
+		ret = regmap_write(st->map, st->reg->int_enable,
+				   INV_MPU6050_BIT_DATA_RDY_EN);
+	} else {
+		ret = regmap_write(st->map, st->reg->int_enable, 0);
+		if (ret)
+			return ret;
+		ret = regmap_write(st->map, st->reg->fifo_en, 0);
+		if (ret)
+			return ret;
+		/* restore user_ctrl for disabling FIFO reading */
+		ret = regmap_write(st->map, st->reg->user_ctrl,
+				   st->chip_config.user_ctrl);
+	}
+
+	return ret;
+}
+
+/**
+ *  inv_mpu6050_set_enable() - enable chip functions.
+ *  @indio_dev:	Device driver instance.
+ *  @enable: enable/disable
+ */
+static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+	unsigned int scan;
+	int result;
+
+	if (enable) {
+		scan = inv_scan_query(indio_dev);
+		result = pm_runtime_resume_and_get(pdev);
+		if (result)
+			return result;
+		/*
+		 * In case autosuspend didn't trigger, turn off first not
+		 * required sensors.
+		 */
+		result = inv_mpu6050_switch_engine(st, false, ~scan);
+		if (result)
+			goto error_power_off;
+		result = inv_mpu6050_switch_engine(st, true, scan);
+		if (result)
+			goto error_power_off;
+		st->skip_samples = inv_compute_skip_samples(st);
+		result = inv_mpu6050_prepare_fifo(st, true);
+		if (result)
+			goto error_power_off;
+	} else {
+		result = inv_mpu6050_prepare_fifo(st, false);
+		if (result)
+			goto error_power_off;
+		pm_runtime_mark_last_busy(pdev);
+		pm_runtime_put_autosuspend(pdev);
+	}
+
+	return 0;
+
+error_power_off:
+	pm_runtime_put_autosuspend(pdev);
+	return result;
+}
+
+/**
+ * inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state
+ * @trig: Trigger instance
+ * @state: Desired trigger state
+ */
+static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					      bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int result;
+
+	mutex_lock(&st->lock);
+	result = inv_mpu6050_set_enable(indio_dev, state);
+	mutex_unlock(&st->lock);
+
+	return result;
+}
+
+static const struct iio_trigger_ops inv_mpu_trigger_ops = {
+	.set_trigger_state = &inv_mpu_data_rdy_trigger_set_state,
+};
+
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type)
+{
+	int ret;
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+	st->trig = devm_iio_trigger_alloc(&indio_dev->dev,
+					  "%s-dev%d",
+					  indio_dev->name,
+					  iio_device_id(indio_dev));
+	if (!st->trig)
+		return -ENOMEM;
+
+	ret = devm_request_irq(&indio_dev->dev, st->irq,
+			       &iio_trigger_generic_data_rdy_poll,
+			       irq_type,
+			       "inv_mpu",
+			       st->trig);
+	if (ret)
+		return ret;
+
+	st->trig->dev.parent = regmap_get_device(st->map);
+	st->trig->ops = &inv_mpu_trigger_ops;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+
+	ret = devm_iio_trigger_register(&indio_dev->dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	return 0;
+}
diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c
new file mode 100644
index 0000000000..958167b312
--- /dev/null
+++ b/drivers/iio/imu/kmx61.c
@@ -0,0 +1,1529 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KMX61 - Kionix 6-axis Accelerometer/Magnetometer
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * IIO driver for KMX61 (7-bit I2C slave address 0x0E or 0x0F).
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define KMX61_DRV_NAME "kmx61"
+#define KMX61_IRQ_NAME "kmx61_event"
+
+#define KMX61_REG_WHO_AM_I	0x00
+#define KMX61_REG_INS1		0x01
+#define KMX61_REG_INS2		0x02
+
+/*
+ * three 16-bit accelerometer output registers for X/Y/Z axis
+ * we use only XOUT_L as a base register, all other addresses
+ * can be obtained by applying an offset and are provided here
+ * only for clarity.
+ */
+#define KMX61_ACC_XOUT_L	0x0A
+#define KMX61_ACC_XOUT_H	0x0B
+#define KMX61_ACC_YOUT_L	0x0C
+#define KMX61_ACC_YOUT_H	0x0D
+#define KMX61_ACC_ZOUT_L	0x0E
+#define KMX61_ACC_ZOUT_H	0x0F
+
+/*
+ * one 16-bit temperature output register
+ */
+#define KMX61_TEMP_L		0x10
+#define KMX61_TEMP_H		0x11
+
+/*
+ * three 16-bit magnetometer output registers for X/Y/Z axis
+ */
+#define KMX61_MAG_XOUT_L	0x12
+#define KMX61_MAG_XOUT_H	0x13
+#define KMX61_MAG_YOUT_L	0x14
+#define KMX61_MAG_YOUT_H	0x15
+#define KMX61_MAG_ZOUT_L	0x16
+#define KMX61_MAG_ZOUT_H	0x17
+
+#define KMX61_REG_INL		0x28
+#define KMX61_REG_STBY		0x29
+#define KMX61_REG_CTRL1		0x2A
+#define KMX61_REG_CTRL2		0x2B
+#define KMX61_REG_ODCNTL	0x2C
+#define KMX61_REG_INC1		0x2D
+
+#define KMX61_REG_WUF_THRESH	0x3D
+#define KMX61_REG_WUF_TIMER	0x3E
+
+#define KMX61_ACC_STBY_BIT	BIT(0)
+#define KMX61_MAG_STBY_BIT	BIT(1)
+#define KMX61_ACT_STBY_BIT	BIT(7)
+
+#define KMX61_ALL_STBY		(KMX61_ACC_STBY_BIT | KMX61_MAG_STBY_BIT)
+
+#define KMX61_REG_INS1_BIT_WUFS		BIT(1)
+
+#define KMX61_REG_INS2_BIT_ZP		BIT(0)
+#define KMX61_REG_INS2_BIT_ZN		BIT(1)
+#define KMX61_REG_INS2_BIT_YP		BIT(2)
+#define KMX61_REG_INS2_BIT_YN		BIT(3)
+#define KMX61_REG_INS2_BIT_XP		BIT(4)
+#define KMX61_REG_INS2_BIT_XN		BIT(5)
+
+#define KMX61_REG_CTRL1_GSEL_MASK	0x03
+
+#define KMX61_REG_CTRL1_BIT_RES		BIT(4)
+#define KMX61_REG_CTRL1_BIT_DRDYE	BIT(5)
+#define KMX61_REG_CTRL1_BIT_WUFE	BIT(6)
+#define KMX61_REG_CTRL1_BIT_BTSE	BIT(7)
+
+#define KMX61_REG_INC1_BIT_WUFS		BIT(0)
+#define KMX61_REG_INC1_BIT_DRDYM	BIT(1)
+#define KMX61_REG_INC1_BIT_DRDYA	BIT(2)
+#define KMX61_REG_INC1_BIT_IEN		BIT(5)
+
+#define KMX61_ACC_ODR_SHIFT	0
+#define KMX61_MAG_ODR_SHIFT	4
+#define KMX61_ACC_ODR_MASK	0x0F
+#define KMX61_MAG_ODR_MASK	0xF0
+
+#define KMX61_OWUF_MASK		0x7
+
+#define KMX61_DEFAULT_WAKE_THRESH	1
+#define KMX61_DEFAULT_WAKE_DURATION	1
+
+#define KMX61_SLEEP_DELAY_MS	2000
+
+#define KMX61_CHIP_ID		0x12
+
+/* KMX61 devices */
+#define KMX61_ACC	0x01
+#define KMX61_MAG	0x02
+
+struct kmx61_data {
+	struct i2c_client *client;
+
+	/* serialize access to non-atomic ops, e.g set_mode */
+	struct mutex lock;
+
+	/* standby state */
+	bool acc_stby;
+	bool mag_stby;
+
+	/* power state */
+	bool acc_ps;
+	bool mag_ps;
+
+	/* config bits */
+	u8 range;
+	u8 odr_bits;
+	u8 wake_thresh;
+	u8 wake_duration;
+
+	/* accelerometer specific data */
+	struct iio_dev *acc_indio_dev;
+	struct iio_trigger *acc_dready_trig;
+	struct iio_trigger *motion_trig;
+	bool acc_dready_trig_on;
+	bool motion_trig_on;
+	bool ev_enable_state;
+
+	/* magnetometer specific data */
+	struct iio_dev *mag_indio_dev;
+	struct iio_trigger *mag_dready_trig;
+	bool mag_dready_trig_on;
+};
+
+enum kmx61_range {
+	KMX61_RANGE_2G,
+	KMX61_RANGE_4G,
+	KMX61_RANGE_8G,
+};
+
+enum kmx61_axis {
+	KMX61_AXIS_X,
+	KMX61_AXIS_Y,
+	KMX61_AXIS_Z,
+};
+
+static const u16 kmx61_uscale_table[] = {9582, 19163, 38326};
+
+static const struct {
+	int val;
+	int val2;
+} kmx61_samp_freq_table[] = { {12, 500000},
+			{25, 0},
+			{50, 0},
+			{100, 0},
+			{200, 0},
+			{400, 0},
+			{800, 0},
+			{1600, 0},
+			{0, 781000},
+			{1, 563000},
+			{3, 125000},
+			{6, 250000} };
+
+static const struct {
+	int val;
+	int val2;
+	int odr_bits;
+} kmx61_wake_up_odr_table[] = { {0, 781000, 0x00},
+				 {1, 563000, 0x01},
+				 {3, 125000, 0x02},
+				 {6, 250000, 0x03},
+				 {12, 500000, 0x04},
+				 {25, 0, 0x05},
+				 {50, 0, 0x06},
+				 {100, 0, 0x06},
+				 {200, 0, 0x06},
+				 {400, 0, 0x06},
+				 {800, 0, 0x06},
+				 {1600, 0, 0x06} };
+
+static IIO_CONST_ATTR(accel_scale_available, "0.009582 0.019163 0.038326");
+static IIO_CONST_ATTR(magn_scale_available, "0.001465");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800");
+
+static struct attribute *kmx61_acc_attributes[] = {
+	&iio_const_attr_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute *kmx61_mag_attributes[] = {
+	&iio_const_attr_magn_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group kmx61_acc_attribute_group = {
+	.attrs = kmx61_acc_attributes,
+};
+
+static const struct attribute_group kmx61_mag_attribute_group = {
+	.attrs = kmx61_mag_attributes,
+};
+
+static const struct iio_event_spec kmx61_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_EITHER,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			 BIT(IIO_EV_INFO_ENABLE) |
+			 BIT(IIO_EV_INFO_PERIOD),
+};
+
+#define KMX61_ACC_CHAN(_axis) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = KMX61_ACC, \
+	.scan_index = KMX61_AXIS_ ## _axis, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 12, \
+		.storagebits = 16, \
+		.shift = 4, \
+		.endianness = IIO_LE, \
+	}, \
+	.event_spec = &kmx61_event, \
+	.num_event_specs = 1 \
+}
+
+#define KMX61_MAG_CHAN(_axis) { \
+	.type = IIO_MAGN, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _axis, \
+	.address = KMX61_MAG, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_index = KMX61_AXIS_ ## _axis, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 14, \
+		.storagebits = 16, \
+		.shift = 2, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+static const struct iio_chan_spec kmx61_acc_channels[] = {
+	KMX61_ACC_CHAN(X),
+	KMX61_ACC_CHAN(Y),
+	KMX61_ACC_CHAN(Z),
+};
+
+static const struct iio_chan_spec kmx61_mag_channels[] = {
+	KMX61_MAG_CHAN(X),
+	KMX61_MAG_CHAN(Y),
+	KMX61_MAG_CHAN(Z),
+};
+
+static void kmx61_set_data(struct iio_dev *indio_dev, struct kmx61_data *data)
+{
+	struct kmx61_data **priv = iio_priv(indio_dev);
+
+	*priv = data;
+}
+
+static struct kmx61_data *kmx61_get_data(struct iio_dev *indio_dev)
+{
+	return *(struct kmx61_data **)iio_priv(indio_dev);
+}
+
+static int kmx61_convert_freq_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
+		if (val == kmx61_samp_freq_table[i].val &&
+		    val2 == kmx61_samp_freq_table[i].val2)
+			return i;
+	return -EINVAL;
+}
+
+static int kmx61_convert_wake_up_odr_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_wake_up_odr_table); ++i)
+		if (kmx61_wake_up_odr_table[i].val == val &&
+			kmx61_wake_up_odr_table[i].val2 == val2)
+				return kmx61_wake_up_odr_table[i].odr_bits;
+	return -EINVAL;
+}
+
+/**
+ * kmx61_set_mode() - set KMX61 device operating mode
+ * @data: kmx61 device private data pointer
+ * @mode: bitmask, indicating operating mode for @device
+ * @device: bitmask, indicating device for which @mode needs to be set
+ * @update: update stby bits stored in device's private  @data
+ *
+ * For each sensor (accelerometer/magnetometer) there are two operating modes
+ * STANDBY and OPERATION. Neither accel nor magn can be disabled independently
+ * if they are both enabled. Internal sensors state is saved in acc_stby and
+ * mag_stby members of driver's private @data.
+ */
+static int kmx61_set_mode(struct kmx61_data *data, u8 mode, u8 device,
+			  bool update)
+{
+	int ret;
+	int acc_stby = -1, mag_stby = -1;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_stby\n");
+		return ret;
+	}
+	if (device & KMX61_ACC) {
+		if (mode & KMX61_ACC_STBY_BIT) {
+			ret |= KMX61_ACC_STBY_BIT;
+			acc_stby = 1;
+		} else {
+			ret &= ~KMX61_ACC_STBY_BIT;
+			acc_stby = 0;
+		}
+	}
+
+	if (device & KMX61_MAG) {
+		if (mode & KMX61_MAG_STBY_BIT) {
+			ret |= KMX61_MAG_STBY_BIT;
+			mag_stby = 1;
+		} else {
+			ret &= ~KMX61_MAG_STBY_BIT;
+			mag_stby = 0;
+		}
+	}
+
+	if (mode & KMX61_ACT_STBY_BIT)
+		ret |= KMX61_ACT_STBY_BIT;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_STBY, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_stby\n");
+		return ret;
+	}
+
+	if (acc_stby != -1 && update)
+		data->acc_stby = acc_stby;
+	if (mag_stby != -1 && update)
+		data->mag_stby = mag_stby;
+
+	return 0;
+}
+
+static int kmx61_get_mode(struct kmx61_data *data, u8 *mode, u8 device)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_stby\n");
+		return ret;
+	}
+	*mode = 0;
+
+	if (device & KMX61_ACC) {
+		if (ret & KMX61_ACC_STBY_BIT)
+			*mode |= KMX61_ACC_STBY_BIT;
+		else
+			*mode &= ~KMX61_ACC_STBY_BIT;
+	}
+
+	if (device & KMX61_MAG) {
+		if (ret & KMX61_MAG_STBY_BIT)
+			*mode |= KMX61_MAG_STBY_BIT;
+		else
+			*mode &= ~KMX61_MAG_STBY_BIT;
+	}
+
+	return 0;
+}
+
+static int kmx61_set_wake_up_odr(struct kmx61_data *data, int val, int val2)
+{
+	int ret, odr_bits;
+
+	odr_bits = kmx61_convert_wake_up_odr_to_bit(val, val2);
+	if (odr_bits < 0)
+		return odr_bits;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL2,
+					odr_bits);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
+	return ret;
+}
+
+static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device)
+{
+	int ret;
+	u8 mode;
+	int lodr_bits, odr_bits;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	lodr_bits = kmx61_convert_freq_to_bit(val, val2);
+	if (lodr_bits < 0)
+		return lodr_bits;
+
+	/* To change ODR, accel and magn must be in STDBY */
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
+			     true);
+	if (ret < 0)
+		return ret;
+
+	odr_bits = 0;
+	if (device & KMX61_ACC)
+		odr_bits |= lodr_bits << KMX61_ACC_ODR_SHIFT;
+	if (device & KMX61_MAG)
+		odr_bits |= lodr_bits << KMX61_MAG_ODR_SHIFT;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_ODCNTL,
+					odr_bits);
+	if (ret < 0)
+		return ret;
+
+	data->odr_bits = odr_bits;
+
+	if (device & KMX61_ACC) {
+		ret = kmx61_set_wake_up_odr(data, val, val2);
+		if (ret)
+			return ret;
+	}
+
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2,
+			 u8 device)
+{
+	u8 lodr_bits;
+
+	if (device & KMX61_ACC)
+		lodr_bits = (data->odr_bits >> KMX61_ACC_ODR_SHIFT) &
+			     KMX61_ACC_ODR_MASK;
+	else if (device & KMX61_MAG)
+		lodr_bits = (data->odr_bits >> KMX61_MAG_ODR_SHIFT) &
+			     KMX61_MAG_ODR_MASK;
+	else
+		return -EINVAL;
+
+	if (lodr_bits >= ARRAY_SIZE(kmx61_samp_freq_table))
+		return -EINVAL;
+
+	*val = kmx61_samp_freq_table[lodr_bits].val;
+	*val2 = kmx61_samp_freq_table[lodr_bits].val2;
+
+	return 0;
+}
+
+static int kmx61_set_range(struct kmx61_data *data, u8 range)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	ret &= ~KMX61_REG_CTRL1_GSEL_MASK;
+	ret |= range & KMX61_REG_CTRL1_GSEL_MASK;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	data->range = range;
+
+	return 0;
+}
+
+static int kmx61_set_scale(struct kmx61_data *data, u16 uscale)
+{
+	int ret, i;
+	u8  mode;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_uscale_table); i++) {
+		if (kmx61_uscale_table[i] == uscale) {
+			ret = kmx61_get_mode(data, &mode,
+					     KMX61_ACC | KMX61_MAG);
+			if (ret < 0)
+				return ret;
+
+			ret = kmx61_set_mode(data, KMX61_ALL_STBY,
+					     KMX61_ACC | KMX61_MAG, true);
+			if (ret < 0)
+				return ret;
+
+			ret = kmx61_set_range(data, i);
+			if (ret < 0)
+				return ret;
+
+			return  kmx61_set_mode(data, mode,
+					       KMX61_ACC | KMX61_MAG, true);
+		}
+	}
+	return -EINVAL;
+}
+
+static int kmx61_chip_init(struct kmx61_data *data)
+{
+	int ret, val, val2;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_WHO_AM_I);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading who_am_i\n");
+		return ret;
+	}
+
+	if (ret != KMX61_CHIP_ID) {
+		dev_err(&data->client->dev,
+			"Wrong chip id, got %x expected %x\n",
+			 ret, KMX61_CHIP_ID);
+		return -EINVAL;
+	}
+
+	/* set accel 12bit, 4g range */
+	ret = kmx61_set_range(data, KMX61_RANGE_4G);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_ODCNTL);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_odcntl\n");
+		return ret;
+	}
+	data->odr_bits = ret;
+
+	/*
+	 * set output data rate for wake up (motion detection) function
+	 * to match data rate for accelerometer sampling
+	 */
+	ret = kmx61_get_odr(data, &val, &val2, KMX61_ACC);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_wake_up_odr(data, val, val2);
+	if (ret < 0)
+		return ret;
+
+	/* set acc/magn to OPERATION mode */
+	ret = kmx61_set_mode(data, 0, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	data->wake_thresh = KMX61_DEFAULT_WAKE_THRESH;
+	data->wake_duration = KMX61_DEFAULT_WAKE_DURATION;
+
+	return 0;
+}
+
+static int kmx61_setup_new_data_interrupt(struct kmx61_data *data,
+					  bool status, u8 device)
+{
+	u8 mode;
+	int ret;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INC1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status) {
+		ret |= KMX61_REG_INC1_BIT_IEN;
+		if (device & KMX61_ACC)
+			ret |= KMX61_REG_INC1_BIT_DRDYA;
+		if (device & KMX61_MAG)
+			ret |=  KMX61_REG_INC1_BIT_DRDYM;
+	} else {
+		ret &= ~KMX61_REG_INC1_BIT_IEN;
+		if (device & KMX61_ACC)
+			ret &= ~KMX61_REG_INC1_BIT_DRDYA;
+		if (device & KMX61_MAG)
+			ret &= ~KMX61_REG_INC1_BIT_DRDYM;
+	}
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_INC1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KMX61_REG_CTRL1_BIT_DRDYE;
+	else
+		ret &= ~KMX61_REG_CTRL1_BIT_DRDYE;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+static int kmx61_chip_update_thresholds(struct kmx61_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KMX61_REG_WUF_TIMER,
+					data->wake_duration);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_wuf_timer\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KMX61_REG_WUF_THRESH,
+					data->wake_thresh);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_wuf_thresh\n");
+
+	return ret;
+}
+
+static int kmx61_setup_any_motion_interrupt(struct kmx61_data *data,
+					    bool status)
+{
+	u8 mode;
+	int ret;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_chip_update_thresholds(data);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INC1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_inc1\n");
+		return ret;
+	}
+	if (status)
+		ret |= (KMX61_REG_INC1_BIT_IEN | KMX61_REG_INC1_BIT_WUFS);
+	else
+		ret &= ~(KMX61_REG_INC1_BIT_IEN | KMX61_REG_INC1_BIT_WUFS);
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_INC1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_inc1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KMX61_REG_CTRL1_BIT_WUFE | KMX61_REG_CTRL1_BIT_BTSE;
+	else
+		ret &= ~(KMX61_REG_CTRL1_BIT_WUFE | KMX61_REG_CTRL1_BIT_BTSE);
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+	mode |= KMX61_ACT_STBY_BIT;
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+/**
+ * kmx61_set_power_state() - set power state for kmx61 @device
+ * @data: kmx61 device private pointer
+ * @on: power state to be set for @device
+ * @device: bitmask indicating device for which @on state needs to be set
+ *
+ * Notice that when ACC power state needs to be set to ON and MAG is in
+ * OPERATION then we know that kmx61_runtime_resume was already called
+ * so we must set ACC OPERATION mode here. The same happens when MAG power
+ * state needs to be set to ON and ACC is in OPERATION.
+ */
+static int kmx61_set_power_state(struct kmx61_data *data, bool on, u8 device)
+{
+#ifdef CONFIG_PM
+	int ret;
+
+	if (device & KMX61_ACC) {
+		if (on && !data->acc_ps && !data->mag_stby) {
+			ret = kmx61_set_mode(data, 0, KMX61_ACC, true);
+			if (ret < 0)
+				return ret;
+		}
+		data->acc_ps = on;
+	}
+	if (device & KMX61_MAG) {
+		if (on && !data->mag_ps && !data->acc_stby) {
+			ret = kmx61_set_mode(data, 0, KMX61_MAG, true);
+			if (ret < 0)
+				return ret;
+		}
+		data->mag_ps = on;
+	}
+
+	if (on) {
+		ret = pm_runtime_resume_and_get(&data->client->dev);
+	} else {
+		pm_runtime_mark_last_busy(&data->client->dev);
+		ret = pm_runtime_put_autosuspend(&data->client->dev);
+	}
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Failed: kmx61_set_power_state for %d, ret %d\n",
+			on, ret);
+
+		return ret;
+	}
+#endif
+	return 0;
+}
+
+static int kmx61_read_measurement(struct kmx61_data *data, u8 base, u8 offset)
+{
+	int ret;
+	u8 reg = base + offset * 2;
+
+	ret = i2c_smbus_read_word_data(data->client, reg);
+	if (ret < 0)
+		dev_err(&data->client->dev, "failed to read reg at %x\n", reg);
+
+	return ret;
+}
+
+static int kmx61_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan, int *val,
+			  int *val2, long mask)
+{
+	int ret;
+	u8 base_reg;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			base_reg = KMX61_ACC_XOUT_L;
+			break;
+		case IIO_MAGN:
+			base_reg = KMX61_MAG_XOUT_L;
+			break;
+		default:
+			return -EINVAL;
+		}
+		mutex_lock(&data->lock);
+
+		ret = kmx61_set_power_state(data, true, chan->address);
+		if (ret) {
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+
+		ret = kmx61_read_measurement(data, base_reg, chan->scan_index);
+		if (ret < 0) {
+			kmx61_set_power_state(data, false, chan->address);
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+		*val = sign_extend32(ret >> chan->scan_type.shift,
+				     chan->scan_type.realbits - 1);
+		ret = kmx61_set_power_state(data, false, chan->address);
+
+		mutex_unlock(&data->lock);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			*val = 0;
+			*val2 = kmx61_uscale_table[data->range];
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MAGN:
+			/* 14 bits res, 1465 microGauss per magn count */
+			*val = 0;
+			*val2 = 1465;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		mutex_lock(&data->lock);
+		ret = kmx61_get_odr(data, val, val2, chan->address);
+		mutex_unlock(&data->lock);
+		if (ret)
+			return -EINVAL;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int kmx61_write_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int val,
+			   int val2, long mask)
+{
+	int ret;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		mutex_lock(&data->lock);
+		ret = kmx61_set_odr(data, val, val2, chan->address);
+		mutex_unlock(&data->lock);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			if (val != 0)
+				return -EINVAL;
+			mutex_lock(&data->lock);
+			ret = kmx61_set_scale(data, val2);
+			mutex_unlock(&data->lock);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_read_event(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    enum iio_event_type type,
+			    enum iio_event_direction dir,
+			    enum iio_event_info info,
+			    int *val, int *val2)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = data->wake_thresh;
+		return IIO_VAL_INT;
+	case IIO_EV_INFO_PERIOD:
+		*val = data->wake_duration;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_write_event(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     enum iio_event_type type,
+			     enum iio_event_direction dir,
+			     enum iio_event_info info,
+			     int val, int val2)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->ev_enable_state)
+		return -EBUSY;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		data->wake_thresh = val;
+		return IIO_VAL_INT;
+	case IIO_EV_INFO_PERIOD:
+		data->wake_duration = val;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_read_event_config(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	return data->ev_enable_state;
+}
+
+static int kmx61_write_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    int state)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int ret = 0;
+
+	if (state && data->ev_enable_state)
+		return 0;
+
+	mutex_lock(&data->lock);
+
+	if (!state && data->motion_trig_on) {
+		data->ev_enable_state = false;
+		goto err_unlock;
+	}
+
+	ret = kmx61_set_power_state(data, state, KMX61_ACC);
+	if (ret < 0)
+		goto err_unlock;
+
+	ret = kmx61_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		kmx61_set_power_state(data, false, KMX61_ACC);
+		goto err_unlock;
+	}
+
+	data->ev_enable_state = state;
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_acc_validate_trigger(struct iio_dev *indio_dev,
+				      struct iio_trigger *trig)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->acc_dready_trig != trig && data->motion_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int kmx61_mag_validate_trigger(struct iio_dev *indio_dev,
+				      struct iio_trigger *trig)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->mag_dready_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct iio_info kmx61_acc_info = {
+	.read_raw		= kmx61_read_raw,
+	.write_raw		= kmx61_write_raw,
+	.attrs			= &kmx61_acc_attribute_group,
+	.read_event_value	= kmx61_read_event,
+	.write_event_value	= kmx61_write_event,
+	.read_event_config	= kmx61_read_event_config,
+	.write_event_config	= kmx61_write_event_config,
+	.validate_trigger	= kmx61_acc_validate_trigger,
+};
+
+static const struct iio_info kmx61_mag_info = {
+	.read_raw		= kmx61_read_raw,
+	.write_raw		= kmx61_write_raw,
+	.attrs			= &kmx61_mag_attribute_group,
+	.validate_trigger	= kmx61_mag_validate_trigger,
+};
+
+
+static int kmx61_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					    bool state)
+{
+	int ret = 0;
+	u8 device;
+
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	mutex_lock(&data->lock);
+
+	if (!state && data->ev_enable_state && data->motion_trig_on) {
+		data->motion_trig_on = false;
+		goto err_unlock;
+	}
+
+	if (data->acc_dready_trig == trig || data->motion_trig == trig)
+		device = KMX61_ACC;
+	else
+		device = KMX61_MAG;
+
+	ret = kmx61_set_power_state(data, state, device);
+	if (ret < 0)
+		goto err_unlock;
+
+	if (data->acc_dready_trig == trig || data->mag_dready_trig == trig)
+		ret = kmx61_setup_new_data_interrupt(data, state, device);
+	else
+		ret = kmx61_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		kmx61_set_power_state(data, false, device);
+		goto err_unlock;
+	}
+
+	if (data->acc_dready_trig == trig)
+		data->acc_dready_trig_on = state;
+	else if (data->mag_dready_trig == trig)
+		data->mag_dready_trig_on = state;
+	else
+		data->motion_trig_on = state;
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static void kmx61_trig_reenable(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INL);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_inl\n");
+}
+
+static const struct iio_trigger_ops kmx61_trigger_ops = {
+	.set_trigger_state = kmx61_data_rdy_trigger_set_state,
+	.reenable = kmx61_trig_reenable,
+};
+
+static irqreturn_t kmx61_event_handler(int irq, void *private)
+{
+	struct kmx61_data *data = private;
+	struct iio_dev *indio_dev = data->acc_indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INS1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ins1\n");
+		goto ack_intr;
+	}
+
+	if (ret & KMX61_REG_INS1_BIT_WUFS) {
+		ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INS2);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg_ins2\n");
+			goto ack_intr;
+		}
+
+		if (ret & KMX61_REG_INS2_BIT_XN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_XP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_YN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_YP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_ZN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_ZP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+	}
+
+ack_intr:
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+
+	ret |= KMX61_REG_CTRL1_BIT_RES;
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INL);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_inl\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t kmx61_data_rdy_trig_poll(int irq, void *private)
+{
+	struct kmx61_data *data = private;
+
+	if (data->acc_dready_trig_on)
+		iio_trigger_poll(data->acc_dready_trig);
+	if (data->mag_dready_trig_on)
+		iio_trigger_poll(data->mag_dready_trig);
+
+	if (data->motion_trig_on)
+		iio_trigger_poll(data->motion_trig);
+
+	if (data->ev_enable_state)
+		return IRQ_WAKE_THREAD;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t kmx61_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int bit, ret, i = 0;
+	u8 base;
+	s16 buffer[8];
+
+	if (indio_dev == data->acc_indio_dev)
+		base = KMX61_ACC_XOUT_L;
+	else
+		base = KMX61_MAG_XOUT_L;
+
+	mutex_lock(&data->lock);
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = kmx61_read_measurement(data, base, bit);
+		if (ret < 0) {
+			mutex_unlock(&data->lock);
+			goto err;
+		}
+		buffer[i++] = ret;
+	}
+	mutex_unlock(&data->lock);
+
+	iio_push_to_buffers(indio_dev, buffer);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const char *kmx61_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+	return dev_name(dev);
+}
+
+static struct iio_dev *kmx61_indiodev_setup(struct kmx61_data *data,
+					    const struct iio_info *info,
+					    const struct iio_chan_spec *chan,
+					    int num_channels,
+					    const char *name)
+{
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&data->client->dev, sizeof(data));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+
+	kmx61_set_data(indio_dev, data);
+
+	indio_dev->channels = chan;
+	indio_dev->num_channels = num_channels;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = info;
+
+	return indio_dev;
+}
+
+static struct iio_trigger *kmx61_trigger_setup(struct kmx61_data *data,
+					       struct iio_dev *indio_dev,
+					       const char *tag)
+{
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = devm_iio_trigger_alloc(&data->client->dev,
+				      "%s-%s-dev%d",
+				      indio_dev->name,
+				      tag,
+				      iio_device_id(indio_dev));
+	if (!trig)
+		return ERR_PTR(-ENOMEM);
+
+	trig->ops = &kmx61_trigger_ops;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return trig;
+}
+
+static int kmx61_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	int ret;
+	struct kmx61_data *data;
+	const char *name = NULL;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->client = client;
+
+	mutex_init(&data->lock);
+
+	if (id)
+		name = id->name;
+	else if (ACPI_HANDLE(&client->dev))
+		name = kmx61_match_acpi_device(&client->dev);
+	else
+		return -ENODEV;
+
+	data->acc_indio_dev =
+		kmx61_indiodev_setup(data, &kmx61_acc_info,
+				     kmx61_acc_channels,
+				     ARRAY_SIZE(kmx61_acc_channels),
+				     name);
+	if (IS_ERR(data->acc_indio_dev))
+		return PTR_ERR(data->acc_indio_dev);
+
+	data->mag_indio_dev =
+		kmx61_indiodev_setup(data, &kmx61_mag_info,
+				     kmx61_mag_channels,
+				     ARRAY_SIZE(kmx61_mag_channels),
+				     name);
+	if (IS_ERR(data->mag_indio_dev))
+		return PTR_ERR(data->mag_indio_dev);
+
+	ret = kmx61_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						kmx61_data_rdy_trig_poll,
+						kmx61_event_handler,
+						IRQF_TRIGGER_RISING,
+						KMX61_IRQ_NAME,
+						data);
+		if (ret)
+			goto err_chip_uninit;
+
+		data->acc_dready_trig =
+			kmx61_trigger_setup(data, data->acc_indio_dev,
+					    "dready");
+		if (IS_ERR(data->acc_dready_trig)) {
+			ret = PTR_ERR(data->acc_dready_trig);
+			goto err_chip_uninit;
+		}
+
+		data->mag_dready_trig =
+			kmx61_trigger_setup(data, data->mag_indio_dev,
+					    "dready");
+		if (IS_ERR(data->mag_dready_trig)) {
+			ret = PTR_ERR(data->mag_dready_trig);
+			goto err_trigger_unregister_acc_dready;
+		}
+
+		data->motion_trig =
+			kmx61_trigger_setup(data, data->acc_indio_dev,
+					    "any-motion");
+		if (IS_ERR(data->motion_trig)) {
+			ret = PTR_ERR(data->motion_trig);
+			goto err_trigger_unregister_mag_dready;
+		}
+
+		ret = iio_triggered_buffer_setup(data->acc_indio_dev,
+						 &iio_pollfunc_store_time,
+						 kmx61_trigger_handler,
+						 NULL);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Failed to setup acc triggered buffer\n");
+			goto err_trigger_unregister_motion;
+		}
+
+		ret = iio_triggered_buffer_setup(data->mag_indio_dev,
+						 &iio_pollfunc_store_time,
+						 kmx61_trigger_handler,
+						 NULL);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Failed to setup mag triggered buffer\n");
+			goto err_buffer_cleanup_acc;
+		}
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0)
+		goto err_buffer_cleanup_mag;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, KMX61_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	ret = iio_device_register(data->acc_indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register acc iio device\n");
+		goto err_pm_cleanup;
+	}
+
+	ret = iio_device_register(data->mag_indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register mag iio device\n");
+		goto err_iio_unregister_acc;
+	}
+
+	return 0;
+
+err_iio_unregister_acc:
+	iio_device_unregister(data->acc_indio_dev);
+err_pm_cleanup:
+	pm_runtime_dont_use_autosuspend(&client->dev);
+	pm_runtime_disable(&client->dev);
+err_buffer_cleanup_mag:
+	if (client->irq > 0)
+		iio_triggered_buffer_cleanup(data->mag_indio_dev);
+err_buffer_cleanup_acc:
+	if (client->irq > 0)
+		iio_triggered_buffer_cleanup(data->acc_indio_dev);
+err_trigger_unregister_motion:
+	iio_trigger_unregister(data->motion_trig);
+err_trigger_unregister_mag_dready:
+	iio_trigger_unregister(data->mag_dready_trig);
+err_trigger_unregister_acc_dready:
+	iio_trigger_unregister(data->acc_dready_trig);
+err_chip_uninit:
+	kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	return ret;
+}
+
+static void kmx61_remove(struct i2c_client *client)
+{
+	struct kmx61_data *data = i2c_get_clientdata(client);
+
+	iio_device_unregister(data->acc_indio_dev);
+	iio_device_unregister(data->mag_indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	if (client->irq > 0) {
+		iio_triggered_buffer_cleanup(data->acc_indio_dev);
+		iio_triggered_buffer_cleanup(data->mag_indio_dev);
+		iio_trigger_unregister(data->acc_dready_trig);
+		iio_trigger_unregister(data->mag_dready_trig);
+		iio_trigger_unregister(data->motion_trig);
+	}
+
+	mutex_lock(&data->lock);
+	kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	mutex_unlock(&data->lock);
+}
+
+static int kmx61_suspend(struct device *dev)
+{
+	int ret;
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->lock);
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
+			     false);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_resume(struct device *dev)
+{
+	u8 stby = 0;
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	if (data->acc_stby)
+		stby |= KMX61_ACC_STBY_BIT;
+	if (data->mag_stby)
+		stby |= KMX61_MAG_STBY_BIT;
+
+	return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
+}
+
+static int kmx61_runtime_suspend(struct device *dev)
+{
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_runtime_resume(struct device *dev)
+{
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	u8 stby = 0;
+
+	if (!data->acc_ps)
+		stby |= KMX61_ACC_STBY_BIT;
+	if (!data->mag_ps)
+		stby |= KMX61_MAG_STBY_BIT;
+
+	return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
+}
+
+static const struct dev_pm_ops kmx61_pm_ops = {
+	SYSTEM_SLEEP_PM_OPS(kmx61_suspend, kmx61_resume)
+	RUNTIME_PM_OPS(kmx61_runtime_suspend, kmx61_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id kmx61_acpi_match[] = {
+	{"KMX61021", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, kmx61_acpi_match);
+
+static const struct i2c_device_id kmx61_id[] = {
+	{"kmx611021", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, kmx61_id);
+
+static struct i2c_driver kmx61_driver = {
+	.driver = {
+		.name = KMX61_DRV_NAME,
+		.acpi_match_table = ACPI_PTR(kmx61_acpi_match),
+		.pm = pm_ptr(&kmx61_pm_ops),
+	},
+	.probe		= kmx61_probe,
+	.remove		= kmx61_remove,
+	.id_table	= kmx61_id,
+};
+
+module_i2c_driver(kmx61_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("KMX61 accelerometer/magnetometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
new file mode 100644
index 0000000000..5865a295a4
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config IIO_ST_LSM6DSX
+	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
+	depends on (I2C || SPI || I3C)
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_KFIFO_BUF
+	select IIO_ST_LSM6DSX_I2C if (I2C)
+	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+	select IIO_ST_LSM6DSX_I3C if (I3C)
+	help
+	  Say yes here to build support for STMicroelectronics LSM6DSx imu
+	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
+	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
+	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
+	  lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, lsm6dst
+	  and the accelerometer/gyroscope of lsm9ds1.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called st_lsm6dsx.
+
+config IIO_ST_LSM6DSX_I2C
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_I2C
+
+config IIO_ST_LSM6DSX_SPI
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
new file mode 100644
index 0000000000..57cbcd67d6
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
+		st_lsm6dsx_shub.o
+
+obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
new file mode 100644
index 0000000000..c19237717e
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -0,0 +1,550 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * STMicroelectronics st_lsm6dsx sensor driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#ifndef ST_LSM6DSX_H
+#define ST_LSM6DSX_H
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+#define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
+#define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
+#define ST_LSM6DSL_DEV_NAME	"lsm6dsl"
+#define ST_LSM6DSM_DEV_NAME	"lsm6dsm"
+#define ST_ISM330DLC_DEV_NAME	"ism330dlc"
+#define ST_LSM6DSO_DEV_NAME	"lsm6dso"
+#define ST_ASM330LHH_DEV_NAME	"asm330lhh"
+#define ST_LSM6DSOX_DEV_NAME	"lsm6dsox"
+#define ST_LSM6DSR_DEV_NAME	"lsm6dsr"
+#define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
+#define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
+#define ST_LSM9DS1_DEV_NAME	"lsm9ds1-imu"
+#define ST_LSM6DS0_DEV_NAME	"lsm6ds0"
+#define ST_LSM6DSRX_DEV_NAME	"lsm6dsrx"
+#define ST_LSM6DST_DEV_NAME	"lsm6dst"
+#define ST_LSM6DSOP_DEV_NAME	"lsm6dsop"
+#define ST_ASM330LHHX_DEV_NAME	"asm330lhhx"
+#define ST_LSM6DSTX_DEV_NAME	"lsm6dstx"
+#define ST_LSM6DSV_DEV_NAME	"lsm6dsv"
+#define ST_LSM6DSV16X_DEV_NAME	"lsm6dsv16x"
+#define ST_LSM6DSO16IS_DEV_NAME	"lsm6dso16is"
+#define ST_ISM330IS_DEV_NAME	"ism330is"
+#define ST_ASM330LHB_DEV_NAME	"asm330lhb"
+
+enum st_lsm6dsx_hw_id {
+	ST_LSM6DS3_ID = 1,
+	ST_LSM6DS3H_ID,
+	ST_LSM6DSL_ID,
+	ST_LSM6DSM_ID,
+	ST_ISM330DLC_ID,
+	ST_LSM6DSO_ID,
+	ST_ASM330LHH_ID,
+	ST_LSM6DSOX_ID,
+	ST_LSM6DSR_ID,
+	ST_LSM6DS3TRC_ID,
+	ST_ISM330DHCX_ID,
+	ST_LSM9DS1_ID,
+	ST_LSM6DS0_ID,
+	ST_LSM6DSRX_ID,
+	ST_LSM6DST_ID,
+	ST_LSM6DSOP_ID,
+	ST_ASM330LHHX_ID,
+	ST_LSM6DSTX_ID,
+	ST_LSM6DSV_ID,
+	ST_LSM6DSV16X_ID,
+	ST_LSM6DSO16IS_ID,
+	ST_ISM330IS_ID,
+	ST_ASM330LHB_ID,
+	ST_LSM6DSX_MAX_ID,
+};
+
+#define ST_LSM6DSX_BUFF_SIZE		512
+#define ST_LSM6DSX_CHAN_SIZE		2
+#define ST_LSM6DSX_SAMPLE_SIZE		6
+#define ST_LSM6DSX_TAG_SIZE		1
+#define ST_LSM6DSX_TAGGED_SAMPLE_SIZE	(ST_LSM6DSX_SAMPLE_SIZE + \
+					 ST_LSM6DSX_TAG_SIZE)
+#define ST_LSM6DSX_MAX_WORD_LEN		((32 / ST_LSM6DSX_SAMPLE_SIZE) * \
+					 ST_LSM6DSX_SAMPLE_SIZE)
+#define ST_LSM6DSX_MAX_TAGGED_WORD_LEN	((32 / ST_LSM6DSX_TAGGED_SAMPLE_SIZE) \
+					 * ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
+#define ST_LSM6DSX_SHIFT_VAL(val, mask)	(((val) << __ffs(mask)) & (mask))
+
+#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx)		\
+{									\
+	.type = chan_type,						\
+	.address = addr,						\
+	.modified = 1,							\
+	.channel2 = mod,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = scan_idx,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
+	},								\
+	.event_spec = &st_lsm6dsx_event,				\
+	.ext_info = st_lsm6dsx_ext_info,				\
+	.num_event_specs = 1,						\
+}
+
+#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx)		\
+{									\
+	.type = chan_type,						\
+	.address = addr,						\
+	.modified = 1,							\
+	.channel2 = mod,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = scan_idx,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
+	},								\
+	.ext_info = st_lsm6dsx_ext_info,				\
+}
+
+struct st_lsm6dsx_reg {
+	u8 addr;
+	u8 mask;
+};
+
+struct st_lsm6dsx_sensor;
+struct st_lsm6dsx_hw;
+
+struct st_lsm6dsx_odr {
+	u32 milli_hz;
+	u8 val;
+};
+
+#define ST_LSM6DSX_ODR_LIST_SIZE	8
+struct st_lsm6dsx_odr_table_entry {
+	struct st_lsm6dsx_reg reg;
+
+	struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
+	int odr_len;
+};
+
+struct st_lsm6dsx_samples_to_discard {
+	struct {
+		u32 milli_hz;
+		u16 samples;
+	} val[ST_LSM6DSX_ODR_LIST_SIZE];
+};
+
+struct st_lsm6dsx_fs {
+	u32 gain;
+	u8 val;
+};
+
+#define ST_LSM6DSX_FS_LIST_SIZE		4
+struct st_lsm6dsx_fs_table_entry {
+	struct st_lsm6dsx_reg reg;
+
+	struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
+	int fs_len;
+};
+
+/**
+ * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings
+ * @update_fifo: Update FIFO configuration callback.
+ * @read_fifo: Read FIFO callback.
+ * @fifo_th: FIFO threshold register info (addr + mask).
+ * @fifo_diff: FIFO diff status register info (addr + mask).
+ * @max_size: Sensor max fifo length in FIFO words.
+ * @th_wl: FIFO threshold word length.
+ */
+struct st_lsm6dsx_fifo_ops {
+	int (*update_fifo)(struct st_lsm6dsx_sensor *sensor, bool enable);
+	int (*read_fifo)(struct st_lsm6dsx_hw *hw);
+	struct {
+		u8 addr;
+		u16 mask;
+	} fifo_th;
+	struct {
+		u8 addr;
+		u16 mask;
+	} fifo_diff;
+	u16 max_size;
+	u8 th_wl;
+};
+
+/**
+ * struct st_lsm6dsx_hw_ts_settings - ST IMU hw timer settings
+ * @timer_en: Hw timer enable register info (addr + mask).
+ * @hr_timer: Hw timer resolution register info (addr + mask).
+ * @fifo_en: Hw timer FIFO enable register info (addr + mask).
+ * @decimator: Hw timer FIFO decimator register info (addr + mask).
+ * @freq_fine: Difference in % of ODR with respect to the typical.
+ */
+struct st_lsm6dsx_hw_ts_settings {
+	struct st_lsm6dsx_reg timer_en;
+	struct st_lsm6dsx_reg hr_timer;
+	struct st_lsm6dsx_reg fifo_en;
+	struct st_lsm6dsx_reg decimator;
+	u8 freq_fine;
+};
+
+/**
+ * struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings
+ * @page_mux: register page mux info (addr + mask).
+ * @master_en: master config register info (addr + mask).
+ * @pullup_en: i2c controller pull-up register info (addr + mask).
+ * @aux_sens: aux sensor register info (addr + mask).
+ * @wr_once: write_once register info (addr + mask).
+ * @emb_func:  embedded function register info (addr + mask).
+ * @num_ext_dev: max number of slave devices.
+ * @shub_out: sensor hub first output register info.
+ * @slv0_addr: slave0 address in secondary page.
+ * @dw_slv0_addr: slave0 write register address in secondary page.
+ * @batch_en: Enable/disable FIFO batching.
+ * @pause: controller pause value.
+ */
+struct st_lsm6dsx_shub_settings {
+	struct st_lsm6dsx_reg page_mux;
+	struct {
+		bool sec_page;
+		u8 addr;
+		u8 mask;
+	} master_en;
+	struct {
+		bool sec_page;
+		u8 addr;
+		u8 mask;
+	} pullup_en;
+	struct st_lsm6dsx_reg aux_sens;
+	struct st_lsm6dsx_reg wr_once;
+	struct st_lsm6dsx_reg emb_func;
+	u8 num_ext_dev;
+	struct {
+		bool sec_page;
+		u8 addr;
+	} shub_out;
+	u8 slv0_addr;
+	u8 dw_slv0_addr;
+	u8 batch_en;
+	u8 pause;
+};
+
+struct st_lsm6dsx_event_settings {
+	struct st_lsm6dsx_reg enable_reg;
+	struct st_lsm6dsx_reg wakeup_reg;
+	u8 wakeup_src_reg;
+	u8 wakeup_src_status_mask;
+	u8 wakeup_src_z_mask;
+	u8 wakeup_src_y_mask;
+	u8 wakeup_src_x_mask;
+};
+
+enum st_lsm6dsx_ext_sensor_id {
+	ST_LSM6DSX_ID_MAGN,
+};
+
+/**
+ * struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings
+ * @i2c_addr: I2c slave address list.
+ * @wai: Wai address info.
+ * @id: external sensor id.
+ * @odr_table: Output data rate of the sensor [Hz].
+ * @fs_table: Configured sensor sensitivity table depending on full scale.
+ * @temp_comp: Temperature compensation register info (addr + mask).
+ * @pwr_table: Power on register info (addr + mask).
+ * @off_canc: Offset cancellation register info (addr + mask).
+ * @bdu: Block data update register info (addr + mask).
+ * @out: Output register info.
+ */
+struct st_lsm6dsx_ext_dev_settings {
+	u8 i2c_addr[2];
+	struct {
+		u8 addr;
+		u8 val;
+	} wai;
+	enum st_lsm6dsx_ext_sensor_id id;
+	struct st_lsm6dsx_odr_table_entry odr_table;
+	struct st_lsm6dsx_fs_table_entry fs_table;
+	struct st_lsm6dsx_reg temp_comp;
+	struct {
+		struct st_lsm6dsx_reg reg;
+		u8 off_val;
+		u8 on_val;
+	} pwr_table;
+	struct st_lsm6dsx_reg off_canc;
+	struct st_lsm6dsx_reg bdu;
+	struct {
+		u8 addr;
+		u8 len;
+	} out;
+};
+
+/**
+ * struct st_lsm6dsx_settings - ST IMU sensor settings
+ * @reset: register address for reset.
+ * @boot: register address for boot.
+ * @bdu: register address for Block Data Update.
+ * @id: List of hw id/device name supported by the driver configuration.
+ * @channels: IIO channels supported by the device.
+ * @irq_config: interrupts related registers.
+ * @drdy_mask: register info for data-ready mask (addr + mask).
+ * @odr_table: Hw sensors odr table (Hz + val).
+ * @samples_to_discard: Number of samples to discard for filters settling time.
+ * @fs_table: Hw sensors gain table (gain + val).
+ * @decimator: List of decimator register info (addr + mask).
+ * @batch: List of FIFO batching register info (addr + mask).
+ * @fifo_ops: Sensor hw FIFO parameters.
+ * @ts_settings: Hw timer related settings.
+ * @shub_settings: i2c controller related settings.
+ */
+struct st_lsm6dsx_settings {
+	struct st_lsm6dsx_reg reset;
+	struct st_lsm6dsx_reg boot;
+	struct st_lsm6dsx_reg bdu;
+	struct {
+		enum st_lsm6dsx_hw_id hw_id;
+		const char *name;
+		u8 wai;
+	} id[ST_LSM6DSX_MAX_ID];
+	struct {
+		const struct iio_chan_spec *chan;
+		int len;
+	} channels[2];
+	struct {
+		struct st_lsm6dsx_reg irq1;
+		struct st_lsm6dsx_reg irq2;
+		struct st_lsm6dsx_reg irq1_func;
+		struct st_lsm6dsx_reg irq2_func;
+		struct st_lsm6dsx_reg lir;
+		struct st_lsm6dsx_reg clear_on_read;
+		struct st_lsm6dsx_reg hla;
+		struct st_lsm6dsx_reg od;
+	} irq_config;
+	struct st_lsm6dsx_reg drdy_mask;
+	struct st_lsm6dsx_odr_table_entry odr_table[2];
+	struct st_lsm6dsx_samples_to_discard samples_to_discard[2];
+	struct st_lsm6dsx_fs_table_entry fs_table[2];
+	struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
+	struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
+	struct st_lsm6dsx_fifo_ops fifo_ops;
+	struct st_lsm6dsx_hw_ts_settings ts_settings;
+	struct st_lsm6dsx_shub_settings shub_settings;
+	struct st_lsm6dsx_event_settings event_settings;
+};
+
+enum st_lsm6dsx_sensor_id {
+	ST_LSM6DSX_ID_GYRO,
+	ST_LSM6DSX_ID_ACC,
+	ST_LSM6DSX_ID_EXT0,
+	ST_LSM6DSX_ID_EXT1,
+	ST_LSM6DSX_ID_EXT2,
+	ST_LSM6DSX_ID_MAX,
+};
+
+enum st_lsm6dsx_fifo_mode {
+	ST_LSM6DSX_FIFO_BYPASS = 0x0,
+	ST_LSM6DSX_FIFO_CONT = 0x6,
+};
+
+/**
+ * struct st_lsm6dsx_sensor - ST IMU sensor instance
+ * @name: Sensor name.
+ * @id: Sensor identifier.
+ * @hw: Pointer to instance of struct st_lsm6dsx_hw.
+ * @gain: Configured sensor sensitivity.
+ * @odr: Output data rate of the sensor [Hz].
+ * @samples_to_discard: Number of samples to discard for filters settling time.
+ * @watermark: Sensor watermark level.
+ * @decimator: Sensor decimation factor.
+ * @sip: Number of samples in a given pattern.
+ * @ts_ref: Sensor timestamp reference for hw one.
+ * @ext_info: Sensor settings if it is connected to i2c controller
+ */
+struct st_lsm6dsx_sensor {
+	char name[32];
+	enum st_lsm6dsx_sensor_id id;
+	struct st_lsm6dsx_hw *hw;
+
+	u32 gain;
+	u32 odr;
+
+	u16 samples_to_discard;
+	u16 watermark;
+	u8 decimator;
+	u8 sip;
+	s64 ts_ref;
+
+	struct {
+		const struct st_lsm6dsx_ext_dev_settings *settings;
+		u32 slv_odr;
+		u8 addr;
+	} ext_info;
+};
+
+/**
+ * struct st_lsm6dsx_hw - ST IMU MEMS hw instance
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @regmap: Register map of the device.
+ * @irq: Device interrupt line (I2C or SPI).
+ * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
+ * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
+ * @page_lock: Mutex to prevent concurrent memory page configuration.
+ * @suspend_mask: Suspended sensor bitmask.
+ * @enable_mask: Enabled sensor bitmask.
+ * @fifo_mask: Enabled hw FIFO bitmask.
+ * @ts_gain: Hw timestamp rate after internal calibration.
+ * @ts_sip: Total number of timestamp samples in a given pattern.
+ * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
+ * @buff: Device read buffer.
+ * @irq_routing: pointer to interrupt routing configuration.
+ * @event_threshold: wakeup event threshold.
+ * @enable_event: enabled event bitmask.
+ * @iio_devs: Pointers to acc/gyro iio_dev instances.
+ * @settings: Pointer to the specific sensor settings in use.
+ * @orientation: sensor chip orientation relative to main hardware.
+ * @scan: Temporary buffers used to align data before iio_push_to_buffers()
+ */
+struct st_lsm6dsx_hw {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+
+	struct mutex fifo_lock;
+	struct mutex conf_lock;
+	struct mutex page_lock;
+
+	u8 suspend_mask;
+	u8 enable_mask;
+	u8 fifo_mask;
+	s64 ts_gain;
+	u8 ts_sip;
+	u8 sip;
+
+	const struct st_lsm6dsx_reg *irq_routing;
+	u8 event_threshold;
+	u8 enable_event;
+
+	u8 *buff;
+
+	struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
+
+	const struct st_lsm6dsx_settings *settings;
+
+	struct iio_mount_matrix orientation;
+	/* Ensure natural alignment of buffer elements */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan[ST_LSM6DSX_ID_MAX];
+};
+
+static __maybe_unused const struct iio_event_spec st_lsm6dsx_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_EITHER,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			 BIT(IIO_EV_INFO_ENABLE)
+};
+
+static __maybe_unused const unsigned long st_lsm6dsx_available_scan_masks[] = {
+	0x7, 0x0,
+};
+
+extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
+
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
+		     struct regmap *regmap);
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+				 bool enable);
+int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val);
+int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
+				u16 watermark);
+int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable);
+int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u32 odr, u8 *val);
+int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name);
+int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable);
+int st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, int len);
+int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable);
+
+static inline int
+st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+			      unsigned int mask, unsigned int val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_update_bits(hw->regmap, addr, mask, val);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static inline int
+st_lsm6dsx_read_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+		       void *val, unsigned int len)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_bulk_read(hw->regmap, addr, val, len);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static inline int
+st_lsm6dsx_write_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+			unsigned int val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_write(hw->regmap, addr, val);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static inline const struct iio_mount_matrix *
+st_lsm6dsx_get_mount_matrix(const struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	return &hw->orientation;
+}
+
+static inline int
+st_lsm6dsx_device_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT2)
+		return st_lsm6dsx_shub_set_enable(sensor, enable);
+
+	return st_lsm6dsx_sensor_set_enable(sensor, enable);
+}
+
+static const
+struct iio_chan_spec_ext_info __maybe_unused st_lsm6dsx_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_lsm6dsx_get_mount_matrix),
+	{ }
+};
+
+#endif /* ST_LSM6DSX_H */
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
new file mode 100644
index 0000000000..066fe561c5
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics st_lsm6dsx FIFO buffer library driver
+ *
+ * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
+ * The FIFO buffer can be configured to store data from gyroscope and
+ * accelerometer. Samples are queued without any tag according to a
+ * specific pattern based on 'FIFO data sets' (6 bytes each):
+ *  - 1st data set is reserved for gyroscope data
+ *  - 2nd data set is reserved for accelerometer data
+ * The FIFO pattern changes depending on the ODRs and decimation factors
+ * assigned to the FIFO data sets. The first sequence of data stored in FIFO
+ * buffer contains the data of all the enabled FIFO data sets
+ * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
+ * value of the decimation factor and ODR set for each FIFO data set.
+ *
+ * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
+ * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB:
+ * The FIFO buffer can be configured to store data from gyroscope and
+ * accelerometer. Each sample is queued with a tag (1B) indicating data
+ * source (gyroscope, accelerometer, hw timer).
+ *
+ * FIFO supported modes:
+ *  - BYPASS: FIFO disabled
+ *  - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index
+ *    restarts from the beginning and the oldest sample is overwritten
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+#include <linux/module.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
+
+#include "st_lsm6dsx.h"
+
+#define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
+#define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
+#define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
+#define ST_LSM6DSX_FIFO_EMPTY_MASK		BIT(12)
+#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR		0x3e
+#define ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR	0x78
+#define ST_LSM6DSX_REG_TS_RESET_ADDR		0x42
+
+#define ST_LSM6DSX_MAX_FIFO_ODR_VAL		0x08
+
+#define ST_LSM6DSX_TS_RESET_VAL			0xaa
+
+struct st_lsm6dsx_decimator_entry {
+	u8 decimator;
+	u8 val;
+};
+
+enum st_lsm6dsx_fifo_tag {
+	ST_LSM6DSX_GYRO_TAG = 0x01,
+	ST_LSM6DSX_ACC_TAG = 0x02,
+	ST_LSM6DSX_TS_TAG = 0x04,
+	ST_LSM6DSX_EXT0_TAG = 0x0f,
+	ST_LSM6DSX_EXT1_TAG = 0x10,
+	ST_LSM6DSX_EXT2_TAG = 0x11,
+};
+
+static const
+struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
+	{  0, 0x0 },
+	{  1, 0x1 },
+	{  2, 0x2 },
+	{  3, 0x3 },
+	{  4, 0x4 },
+	{  8, 0x5 },
+	{ 16, 0x6 },
+	{ 32, 0x7 },
+};
+
+static int
+st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
+{
+	const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
+	u32 decimator =  max_odr / sensor->odr;
+	int i;
+
+	if (decimator > 1)
+		decimator = round_down(decimator, 2);
+
+	for (i = 0; i < max_size; i++) {
+		if (st_lsm6dsx_decimator_table[i].decimator == decimator)
+			break;
+	}
+
+	sensor->decimator = decimator;
+	return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
+}
+
+static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
+				       u32 *max_odr, u32 *min_odr)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	int i;
+
+	*max_odr = 0, *min_odr = ~0;
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		sensor = iio_priv(hw->iio_devs[i]);
+
+		if (!(hw->enable_mask & BIT(sensor->id)))
+			continue;
+
+		*max_odr = max_t(u32, *max_odr, sensor->odr);
+		*min_odr = min_t(u32, *min_odr, sensor->odr);
+	}
+}
+
+static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
+{
+	u8 sip = sensor->odr / min_odr;
+
+	return sip > 1 ? round_down(sip, 2) : sip;
+}
+
+static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_reg *ts_dec_reg;
+	struct st_lsm6dsx_sensor *sensor;
+	u16 sip = 0, ts_sip = 0;
+	u32 max_odr, min_odr;
+	int err = 0, i;
+	u8 data;
+
+	st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr);
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		const struct st_lsm6dsx_reg *dec_reg;
+
+		if (!hw->iio_devs[i])
+			continue;
+
+		sensor = iio_priv(hw->iio_devs[i]);
+		/* update fifo decimators and sample in pattern */
+		if (hw->enable_mask & BIT(sensor->id)) {
+			sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
+			data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
+		} else {
+			sensor->sip = 0;
+			data = 0;
+		}
+		ts_sip = max_t(u16, ts_sip, sensor->sip);
+
+		dec_reg = &hw->settings->decimator[sensor->id];
+		if (dec_reg->addr) {
+			int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);
+
+			err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
+							    dec_reg->mask,
+							    val);
+			if (err < 0)
+				return err;
+		}
+		sip += sensor->sip;
+	}
+	hw->sip = sip + ts_sip;
+	hw->ts_sip = ts_sip;
+
+	/*
+	 * update hw ts decimator if necessary. Decimator for hw timestamp
+	 * is always 1 or 0 in order to have a ts sample for each data
+	 * sample in FIFO
+	 */
+	ts_dec_reg = &hw->settings->ts_settings.decimator;
+	if (ts_dec_reg->addr) {
+		int val, ts_dec = !!hw->ts_sip;
+
+		val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
+		err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
+						    ts_dec_reg->mask, val);
+	}
+	return err;
+}
+
+static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
+				    enum st_lsm6dsx_fifo_mode fifo_mode)
+{
+	unsigned int data;
+
+	data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
+	return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+					     ST_LSM6DSX_FIFO_MODE_MASK, data);
+}
+
+static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
+				   bool enable)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *batch_reg;
+	u8 data;
+
+	batch_reg = &hw->settings->batch[sensor->id];
+	if (batch_reg->addr) {
+		int val;
+
+		if (enable) {
+			int err;
+
+			err = st_lsm6dsx_check_odr(sensor, sensor->odr,
+						   &data);
+			if (err < 0)
+				return err;
+		} else {
+			data = 0;
+		}
+		val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
+		return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
+						     batch_reg->mask, val);
+	} else {
+		data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
+		return st_lsm6dsx_update_bits_locked(hw,
+					ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+					ST_LSM6DSX_FIFO_ODR_MASK,
+					FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK,
+						   data));
+	}
+}
+
+int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
+{
+	u16 fifo_watermark = ~0, cur_watermark, fifo_th_mask;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	struct st_lsm6dsx_sensor *cur_sensor;
+	int i, err, data;
+	__le16 wdata;
+
+	if (!hw->sip)
+		return 0;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		cur_sensor = iio_priv(hw->iio_devs[i]);
+
+		if (!(hw->enable_mask & BIT(cur_sensor->id)))
+			continue;
+
+		cur_watermark = (cur_sensor == sensor) ? watermark
+						       : cur_sensor->watermark;
+
+		fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
+	}
+
+	fifo_watermark = max_t(u16, fifo_watermark, hw->sip);
+	fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
+	fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
+			  &data);
+	if (err < 0)
+		goto out;
+
+	fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
+	fifo_watermark = ((data << 8) & ~fifo_th_mask) |
+			 (fifo_watermark & fifo_th_mask);
+
+	wdata = cpu_to_le16(fifo_watermark);
+	err = regmap_bulk_write(hw->regmap,
+				hw->settings->fifo_ops.fifo_th.addr,
+				&wdata, sizeof(wdata));
+out:
+	mutex_unlock(&hw->page_lock);
+	return err;
+}
+
+static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	int i, err;
+
+	/* reset hw ts counter */
+	err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR,
+				      ST_LSM6DSX_TS_RESET_VAL);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		sensor = iio_priv(hw->iio_devs[i]);
+		/*
+		 * store enable buffer timestamp as reference for
+		 * hw timestamp
+		 */
+		sensor->ts_ref = iio_get_time_ns(hw->iio_devs[i]);
+	}
+	return 0;
+}
+
+int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw)
+{
+	int err;
+
+	/* reset hw ts counter */
+	err = st_lsm6dsx_reset_hw_ts(hw);
+	if (err < 0)
+		return err;
+
+	return st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
+}
+
+/*
+ * Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN/ST_LSM6DSX_MAX_TAGGED_WORD_LEN
+ * in order to avoid a kmalloc for each bus access
+ */
+static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
+					u8 *data, unsigned int data_len,
+					unsigned int max_word_len)
+{
+	unsigned int word_len, read_len = 0;
+	int err;
+
+	while (read_len < data_len) {
+		word_len = min_t(unsigned int, data_len - read_len,
+				 max_word_len);
+		err = st_lsm6dsx_read_locked(hw, addr, data + read_len,
+					     word_len);
+		if (err < 0)
+			return err;
+		read_len += word_len;
+	}
+	return 0;
+}
+
+#define ST_LSM6DSX_IIO_BUFF_SIZE	(ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \
+					       sizeof(s64)) + sizeof(s64))
+/**
+ * st_lsm6dsx_read_fifo() - hw FIFO read routine
+ * @hw: Pointer to instance of struct st_lsm6dsx_hw.
+ *
+ * Read samples from the hw FIFO and push them to IIO buffers.
+ *
+ * Return: Number of bytes read from the FIFO
+ */
+int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
+{
+	struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
+	int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
+	u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
+	u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
+	bool reset_ts = false;
+	__le16 fifo_status;
+	s64 ts = 0;
+
+	err = st_lsm6dsx_read_locked(hw,
+				     hw->settings->fifo_ops.fifo_diff.addr,
+				     &fifo_status, sizeof(fifo_status));
+	if (err < 0) {
+		dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
+			err);
+		return err;
+	}
+
+	if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK))
+		return 0;
+
+	fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
+		   ST_LSM6DSX_CHAN_SIZE;
+	fifo_len = (fifo_len / pattern_len) * pattern_len;
+
+	acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
+	if (hw->iio_devs[ST_LSM6DSX_ID_EXT0])
+		ext_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_EXT0]);
+
+	for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
+		err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
+					    hw->buff, pattern_len,
+					    ST_LSM6DSX_MAX_WORD_LEN);
+		if (err < 0) {
+			dev_err(hw->dev,
+				"failed to read pattern from fifo (err=%d)\n",
+				err);
+			return err;
+		}
+
+		/*
+		 * Data are written to the FIFO with a specific pattern
+		 * depending on the configured ODRs. The first sequence of data
+		 * stored in FIFO contains the data of all enabled sensors
+		 * (e.g. Gx, Gy, Gz, Ax, Ay, Az, Ts), then data are repeated
+		 * depending on the value of the decimation factor set for each
+		 * sensor.
+		 *
+		 * Supposing the FIFO is storing data from gyroscope and
+		 * accelerometer at different ODRs:
+		 *   - gyroscope ODR = 208Hz, accelerometer ODR = 104Hz
+		 * Since the gyroscope ODR is twice the accelerometer one, the
+		 * following pattern is repeated every 9 samples:
+		 *   - Gx, Gy, Gz, Ax, Ay, Az, Ts, Gx, Gy, Gz, Ts, Gx, ..
+		 */
+		ext_sip = ext_sensor ? ext_sensor->sip : 0;
+		gyro_sip = gyro_sensor->sip;
+		acc_sip = acc_sensor->sip;
+		ts_sip = hw->ts_sip;
+		offset = 0;
+		sip = 0;
+
+		while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
+			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
+				memcpy(hw->scan[ST_LSM6DSX_ID_GYRO].channels,
+				       &hw->buff[offset],
+				       sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels));
+				offset += sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels);
+			}
+			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
+				memcpy(hw->scan[ST_LSM6DSX_ID_ACC].channels,
+				       &hw->buff[offset],
+				       sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels));
+				offset += sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels);
+			}
+			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
+				memcpy(hw->scan[ST_LSM6DSX_ID_EXT0].channels,
+				       &hw->buff[offset],
+				       sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels));
+				offset += sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels);
+			}
+
+			if (ts_sip-- > 0) {
+				u8 data[ST_LSM6DSX_SAMPLE_SIZE];
+
+				memcpy(data, &hw->buff[offset], sizeof(data));
+				/*
+				 * hw timestamp is 3B long and it is stored
+				 * in FIFO using 6B as 4th FIFO data set
+				 * according to this schema:
+				 * B0 = ts[15:8], B1 = ts[23:16], B3 = ts[7:0]
+				 */
+				ts = data[1] << 16 | data[0] << 8 | data[3];
+				/*
+				 * check if hw timestamp engine is going to
+				 * reset (the sensor generates an interrupt
+				 * to signal the hw timestamp will reset in
+				 * 1.638s)
+				 */
+				if (!reset_ts && ts >= 0xff0000)
+					reset_ts = true;
+				ts *= hw->ts_gain;
+
+				offset += ST_LSM6DSX_SAMPLE_SIZE;
+			}
+
+			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
+				/*
+				 * We need to discards gyro samples during
+				 * filters settling time
+				 */
+				if (gyro_sensor->samples_to_discard > 0)
+					gyro_sensor->samples_to_discard--;
+				else
+					iio_push_to_buffers_with_timestamp(
+						hw->iio_devs[ST_LSM6DSX_ID_GYRO],
+						&hw->scan[ST_LSM6DSX_ID_GYRO],
+						gyro_sensor->ts_ref + ts);
+				gyro_sip--;
+			}
+			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
+				/*
+				 * We need to discards accel samples during
+				 * filters settling time
+				 */
+				if (acc_sensor->samples_to_discard > 0)
+					acc_sensor->samples_to_discard--;
+				else
+					iio_push_to_buffers_with_timestamp(
+						hw->iio_devs[ST_LSM6DSX_ID_ACC],
+						&hw->scan[ST_LSM6DSX_ID_ACC],
+						acc_sensor->ts_ref + ts);
+				acc_sip--;
+			}
+			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
+				iio_push_to_buffers_with_timestamp(
+					hw->iio_devs[ST_LSM6DSX_ID_EXT0],
+					&hw->scan[ST_LSM6DSX_ID_EXT0],
+					ext_sensor->ts_ref + ts);
+				ext_sip--;
+			}
+			sip++;
+		}
+	}
+
+	if (unlikely(reset_ts)) {
+		err = st_lsm6dsx_reset_hw_ts(hw);
+		if (err < 0) {
+			dev_err(hw->dev, "failed to reset hw ts (err=%d)\n",
+				err);
+			return err;
+		}
+	}
+	return read_len;
+}
+
+#define ST_LSM6DSX_INVALID_SAMPLE	0x7ffd
+static int
+st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
+			    u8 *data, s64 ts)
+{
+	s16 val = le16_to_cpu(*(__le16 *)data);
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	/* invalid sample during bootstrap phase */
+	if (val >= ST_LSM6DSX_INVALID_SAMPLE)
+		return -EINVAL;
+
+	/*
+	 * EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
+	 * corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
+	 * to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled
+	 * channel
+	 */
+	switch (tag) {
+	case ST_LSM6DSX_GYRO_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO];
+		break;
+	case ST_LSM6DSX_ACC_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
+		break;
+	case ST_LSM6DSX_EXT0_TAG:
+		if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
+		else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
+		else
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	case ST_LSM6DSX_EXT1_TAG:
+		if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) &&
+		    (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
+		else
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	case ST_LSM6DSX_EXT2_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor = iio_priv(iio_dev);
+	iio_push_to_buffers_with_timestamp(iio_dev, data,
+					   ts + sensor->ts_ref);
+
+	return 0;
+}
+
+/**
+ * st_lsm6dsx_read_tagged_fifo() - tagged hw FIFO read routine
+ * @hw: Pointer to instance of struct st_lsm6dsx_hw.
+ *
+ * Read samples from the hw FIFO and push them to IIO buffers.
+ *
+ * Return: Number of bytes read from the FIFO
+ */
+int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
+{
+	u16 pattern_len = hw->sip * ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
+	u16 fifo_len, fifo_diff_mask;
+	/*
+	 * Alignment needed as this can ultimately be passed to a
+	 * call to iio_push_to_buffers_with_timestamp() which
+	 * must be passed a buffer that is aligned to 8 bytes so
+	 * as to allow insertion of a naturally aligned timestamp.
+	 */
+	u8 iio_buff[ST_LSM6DSX_IIO_BUFF_SIZE] __aligned(8);
+	u8 tag;
+	bool reset_ts = false;
+	int i, err, read_len;
+	__le16 fifo_status;
+	s64 ts = 0;
+
+	err = st_lsm6dsx_read_locked(hw,
+				     hw->settings->fifo_ops.fifo_diff.addr,
+				     &fifo_status, sizeof(fifo_status));
+	if (err < 0) {
+		dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
+			err);
+		return err;
+	}
+
+	fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
+	fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
+		   ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
+	if (!fifo_len)
+		return 0;
+
+	for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
+		err = st_lsm6dsx_read_block(hw,
+					    ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR,
+					    hw->buff, pattern_len,
+					    ST_LSM6DSX_MAX_TAGGED_WORD_LEN);
+		if (err < 0) {
+			dev_err(hw->dev,
+				"failed to read pattern from fifo (err=%d)\n",
+				err);
+			return err;
+		}
+
+		for (i = 0; i < pattern_len;
+		     i += ST_LSM6DSX_TAGGED_SAMPLE_SIZE) {
+			memcpy(iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE],
+			       ST_LSM6DSX_SAMPLE_SIZE);
+
+			tag = hw->buff[i] >> 3;
+			if (tag == ST_LSM6DSX_TS_TAG) {
+				/*
+				 * hw timestamp is 4B long and it is stored
+				 * in FIFO according to this schema:
+				 * B0 = ts[7:0], B1 = ts[15:8], B2 = ts[23:16],
+				 * B3 = ts[31:24]
+				 */
+				ts = le32_to_cpu(*((__le32 *)iio_buff));
+				/*
+				 * check if hw timestamp engine is going to
+				 * reset (the sensor generates an interrupt
+				 * to signal the hw timestamp will reset in
+				 * 1.638s)
+				 */
+				if (!reset_ts && ts >= 0xffff0000)
+					reset_ts = true;
+				ts *= hw->ts_gain;
+			} else {
+				st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
+							    ts);
+			}
+		}
+	}
+
+	if (unlikely(reset_ts)) {
+		err = st_lsm6dsx_reset_hw_ts(hw);
+		if (err < 0)
+			return err;
+	}
+	return read_len;
+}
+
+int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
+{
+	int err;
+
+	if (!hw->settings->fifo_ops.read_fifo)
+		return -ENOTSUPP;
+
+	mutex_lock(&hw->fifo_lock);
+
+	hw->settings->fifo_ops.read_fifo(hw);
+	err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS);
+
+	mutex_unlock(&hw->fifo_lock);
+
+	return err;
+}
+
+static void
+st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor)
+{
+	const struct st_lsm6dsx_samples_to_discard *data;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int i;
+
+	if (sensor->id != ST_LSM6DSX_ID_GYRO &&
+	    sensor->id != ST_LSM6DSX_ID_ACC)
+		return;
+
+	/* check if drdy mask is supported in hw */
+	if (hw->settings->drdy_mask.addr)
+		return;
+
+	data = &hw->settings->samples_to_discard[sensor->id];
+	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
+		if (data->val[i].milli_hz == sensor->odr) {
+			sensor->samples_to_discard = data->val[i].samples;
+			return;
+		}
+	}
+}
+
+int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 fifo_mask;
+	int err;
+
+	mutex_lock(&hw->conf_lock);
+
+	if (enable)
+		fifo_mask = hw->fifo_mask | BIT(sensor->id);
+	else
+		fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
+
+	if (hw->fifo_mask) {
+		err = st_lsm6dsx_flush_fifo(hw);
+		if (err < 0)
+			goto out;
+	}
+
+	if (enable)
+		st_lsm6dsx_update_samples_to_discard(sensor);
+
+	err = st_lsm6dsx_device_set_enable(sensor, enable);
+	if (err < 0)
+		goto out;
+
+	err = st_lsm6dsx_set_fifo_odr(sensor, enable);
+	if (err < 0)
+		goto out;
+
+	err = st_lsm6dsx_update_decimators(hw);
+	if (err < 0)
+		goto out;
+
+	err = st_lsm6dsx_update_watermark(sensor, sensor->watermark);
+	if (err < 0)
+		goto out;
+
+	if (fifo_mask) {
+		err = st_lsm6dsx_resume_fifo(hw);
+		if (err < 0)
+			goto out;
+	}
+
+	hw->fifo_mask = fifo_mask;
+
+out:
+	mutex_unlock(&hw->conf_lock);
+
+	return err;
+}
+
+static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (!hw->settings->fifo_ops.update_fifo)
+		return -ENOTSUPP;
+
+	return hw->settings->fifo_ops.update_fifo(sensor, true);
+}
+
+static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (!hw->settings->fifo_ops.update_fifo)
+		return -ENOTSUPP;
+
+	return hw->settings->fifo_ops.update_fifo(sensor, false);
+}
+
+static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
+	.preenable = st_lsm6dsx_buffer_preenable,
+	.postdisable = st_lsm6dsx_buffer_postdisable,
+};
+
+int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
+{
+	int i, ret;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		ret = devm_iio_kfifo_buffer_setup(hw->dev, hw->iio_devs[i],
+						  &st_lsm6dsx_buffer_ops);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
new file mode 100644
index 0000000000..b6e6b1df8a
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -0,0 +1,2864 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics st_lsm6dsx sensor driver
+ *
+ * The ST LSM6DSx IMU MEMS series consists of 3D digital accelerometer
+ * and 3D digital gyroscope system-in-package with a digital I2C/SPI serial
+ * interface standard output.
+ * LSM6DSx IMU MEMS series has a dynamic user-selectable full-scale
+ * acceleration range of +-2/+-4/+-8/+-16 g and an angular rate range of
+ * +-125/+-245/+-500/+-1000/+-2000 dps
+ * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer
+ * allowing dynamic batching of sensor data.
+ * LSM9DSx series is similar but includes an additional magnetometer, handled
+ * by a different driver.
+ *
+ * Supported sensors:
+ * - LSM6DS3:
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
+ *   - FIFO size: 8KB
+ *
+ * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
+ *   - FIFO size: 4KB
+ *
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
+ *   LSM6DSTX/LSM6DSO16IS/ISM330IS:
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
+ *     833
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
+ *   - FIFO size: 3KB
+ *
+ * - LSM6DSV/LSM6DSV16X:
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 7.5, 15, 30, 60, 120, 240,
+ *     480, 960
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported full-scale [dps]: +-125/+-250/+-500/+-1000/+-2000
+ *   - FIFO size: 3KB
+ *
+ * - LSM9DS1/LSM6DS0:
+ *   - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
+ *   - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000
+ *   - FIFO size: 32
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/minmax.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
+
+#include "st_lsm6dsx.h"
+
+#define ST_LSM6DSX_REG_WHOAMI_ADDR		0x0f
+
+#define ST_LSM6DSX_TS_SENSITIVITY		25000UL /* 25us */
+
+static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x18, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
+	{
+		.reset = {
+			.addr = 0x22,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x22,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x22,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM9DS1_ID,
+				.name = ST_LSM9DS1_DEV_NAME,
+				.wai = 0x68,
+			}, {
+				.hw_id = ST_LSM6DS0_ID,
+				.name = ST_LSM6DS0_DEV_NAME,
+				.wai = 0x68,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6ds0_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6ds0_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  10000, 0x01 },
+				.odr_avl[1] = {  50000, 0x02 },
+				.odr_avl[2] = { 119000, 0x03 },
+				.odr_avl[3] = { 238000, 0x04 },
+				.odr_avl[4] = { 476000, 0x05 },
+				.odr_avl[5] = { 952000, 0x06 },
+				.odr_len = 6,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  14900, 0x01 },
+				.odr_avl[1] = {  59500, 0x02 },
+				.odr_avl[2] = { 119000, 0x03 },
+				.odr_avl[3] = { 238000, 0x04 },
+				.odr_avl[4] = { 476000, 0x05 },
+				.odr_avl[5] = { 952000, 0x06 },
+				.odr_len = 6,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(4, 3),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(732000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(4, 3),
+				},
+
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 3,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0c,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.hla = {
+				.addr = 0x22,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x22,
+				.mask = BIT(4),
+			},
+		},
+		.fifo_ops = {
+			.max_size = 32,
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DS3_ID,
+				.name = ST_LSM6DS3_DEV_NAME,
+				.wai = 0x69,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.decimator = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x08,
+				.mask = GENMASK(2, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x08,
+				.mask = GENMASK(5, 3),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_fifo,
+			.fifo_th = {
+				.addr = 0x06,
+				.mask = GENMASK(11, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(11, 0),
+			},
+			.max_size = 1365,
+			.th_wl = 3, /* 1LSB = 2B */
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.hr_timer = {
+				.addr = 0x5c,
+				.mask = BIT(4),
+			},
+			.fifo_en = {
+				.addr = 0x07,
+				.mask = BIT(7),
+			},
+			.decimator = {
+				.addr = 0x09,
+				.mask = GENMASK(5, 3),
+			},
+		},
+		.event_settings = {
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DS3H_ID,
+				.name = ST_LSM6DS3H_DEV_NAME,
+				.wai = 0x69,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.decimator = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x08,
+				.mask = GENMASK(2, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x08,
+				.mask = GENMASK(5, 3),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_fifo,
+			.fifo_th = {
+				.addr = 0x06,
+				.mask = GENMASK(11, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(11, 0),
+			},
+			.max_size = 682,
+			.th_wl = 3, /* 1LSB = 2B */
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.hr_timer = {
+				.addr = 0x5c,
+				.mask = BIT(4),
+			},
+			.fifo_en = {
+				.addr = 0x07,
+				.mask = BIT(7),
+			},
+			.decimator = {
+				.addr = 0x09,
+				.mask = GENMASK(5, 3),
+			},
+		},
+		.event_settings = {
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSL_ID,
+				.name = ST_LSM6DSL_DEV_NAME,
+				.wai = 0x6a,
+			}, {
+				.hw_id = ST_LSM6DSM_ID,
+				.name = ST_LSM6DSM_DEV_NAME,
+				.wai = 0x6a,
+			}, {
+				.hw_id = ST_ISM330DLC_ID,
+				.name = ST_ISM330DLC_DEV_NAME,
+				.wai = 0x6a,
+			}, {
+				.hw_id = ST_LSM6DS3TRC_ID,
+				.name = ST_LSM6DS3TRC_DEV_NAME,
+				.wai = 0x6a,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_len = 6,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.samples_to_discard = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.val[0] = {  12500, 1 },
+				.val[1] = {  26000, 1 },
+				.val[2] = {  52000, 1 },
+				.val[3] = { 104000, 2 },
+				.val[4] = { 208000, 2 },
+				.val[5] = { 416000, 2 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.val[0] = {  12500,  2 },
+				.val[1] = {  26000,  5 },
+				.val[2] = {  52000,  7 },
+				.val[3] = { 104000, 12 },
+				.val[4] = { 208000, 20 },
+				.val[5] = { 416000, 36 },
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.decimator = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x08,
+				.mask = GENMASK(2, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x08,
+				.mask = GENMASK(5, 3),
+			},
+			[ST_LSM6DSX_ID_EXT0] = {
+				.addr = 0x09,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_fifo,
+			.fifo_th = {
+				.addr = 0x06,
+				.mask = GENMASK(10, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(10, 0),
+			},
+			.max_size = 682,
+			.th_wl = 3, /* 1LSB = 2B */
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x19,
+				.mask = BIT(5),
+			},
+			.hr_timer = {
+				.addr = 0x5c,
+				.mask = BIT(4),
+			},
+			.fifo_en = {
+				.addr = 0x07,
+				.mask = BIT(7),
+			},
+			.decimator = {
+				.addr = 0x09,
+				.mask = GENMASK(5, 3),
+			},
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(7),
+			},
+			.master_en = {
+				.addr = 0x1a,
+				.mask = BIT(0),
+			},
+			.pullup_en = {
+				.addr = 0x1a,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x04,
+				.mask = GENMASK(5, 4),
+			},
+			.wr_once = {
+				.addr = 0x07,
+				.mask = BIT(5),
+			},
+			.emb_func = {
+				.addr = 0x19,
+				.mask = BIT(2),
+			},
+			.num_ext_dev = 1,
+			.shub_out = {
+				.addr = 0x2e,
+			},
+			.slv0_addr = 0x02,
+			.dw_slv0_addr = 0x0e,
+			.pause = 0x7,
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSR_ID,
+				.name = ST_LSM6DSR_DEV_NAME,
+				.wai = 0x6b,
+			}, {
+				.hw_id = ST_ISM330DHCX_ID,
+				.name = ST_ISM330DHCX_DEV_NAME,
+				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSRX_ID,
+				.name = ST_LSM6DSRX_DEV_NAME,
+				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSO_ID,
+				.name = ST_LSM6DSO_DEV_NAME,
+				.wai = 0x6c,
+			}, {
+				.hw_id = ST_LSM6DSOX_ID,
+				.name = ST_LSM6DSOX_DEV_NAME,
+				.wai = 0x6c,
+			}, {
+				.hw_id = ST_LSM6DST_ID,
+				.name = ST_LSM6DST_DEV_NAME,
+				.wai = 0x6d,
+			}, {
+				.hw_id = ST_ASM330LHHX_ID,
+				.name = ST_ASM330LHHX_DEV_NAME,
+				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSTX_ID,
+				.name = ST_LSM6DSTX_DEV_NAME,
+				.wai = 0x6d,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.clear_on_read = {
+				.addr = 0x56,
+				.mask = BIT(6),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.batch = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x09,
+				.mask = GENMASK(3, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x09,
+				.mask = GENMASK(7, 4),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_tagged_fifo,
+			.fifo_th = {
+				.addr = 0x07,
+				.mask = GENMASK(8, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(9, 0),
+			},
+			.max_size = 512,
+			.th_wl = 1,
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x19,
+				.mask = BIT(5),
+			},
+			.decimator = {
+				.addr = 0x0a,
+				.mask = GENMASK(7, 6),
+			},
+			.freq_fine = 0x63,
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.num_ext_dev = 3,
+			.shub_out = {
+				.sec_page = true,
+				.addr = 0x02,
+			},
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+			.batch_en = BIT(3),
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5b,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_ASM330LHH_ID,
+				.name = ST_ASM330LHH_DEV_NAME,
+				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSOP_ID,
+				.name = ST_LSM6DSOP_DEV_NAME,
+				.wai = 0x6c,
+			}, {
+				.hw_id = ST_ASM330LHB_ID,
+				.name = ST_ASM330LHB_DEV_NAME,
+				.wai = 0x6b,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.clear_on_read = {
+				.addr = 0x56,
+				.mask = BIT(6),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.batch = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x09,
+				.mask = GENMASK(3, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x09,
+				.mask = GENMASK(7, 4),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_tagged_fifo,
+			.fifo_th = {
+				.addr = 0x07,
+				.mask = GENMASK(8, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x3a,
+				.mask = GENMASK(9, 0),
+			},
+			.max_size = 512,
+			.th_wl = 1,
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x19,
+				.mask = BIT(5),
+			},
+			.decimator = {
+				.addr = 0x0a,
+				.mask = GENMASK(7, 6),
+			},
+			.freq_fine = 0x63,
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSV_ID,
+				.name = ST_LSM6DSV_DEV_NAME,
+				.wai = 0x70,
+			}, {
+				.hw_id = ST_LSM6DSV16X_ID,
+				.name = ST_LSM6DSV16X_DEV_NAME,
+				.wai = 0x70,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 0),
+				},
+				.odr_avl[0] = {   7500, 0x02 },
+				.odr_avl[1] = {  15000, 0x03 },
+				.odr_avl[2] = {  30000, 0x04 },
+				.odr_avl[3] = {  60000, 0x05 },
+				.odr_avl[4] = { 120000, 0x06 },
+				.odr_avl[5] = { 240000, 0x07 },
+				.odr_avl[6] = { 480000, 0x08 },
+				.odr_avl[7] = { 960000, 0x09 },
+				.odr_len = 8,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 0),
+				},
+				.odr_avl[0] = {   7500, 0x02 },
+				.odr_avl[1] = {  15000, 0x03 },
+				.odr_avl[2] = {  30000, 0x04 },
+				.odr_avl[3] = {  60000, 0x05 },
+				.odr_avl[4] = { 120000, 0x06 },
+				.odr_avl[5] = { 240000, 0x07 },
+				.odr_avl[6] = { 480000, 0x08 },
+				.odr_avl[7] = { 960000, 0x09 },
+				.odr_len = 8,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x17,
+					.mask = GENMASK(1, 0),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x1 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x2 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x3 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x15,
+					.mask = GENMASK(3, 0),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x1 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x2 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x3 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x4 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x03,
+				.mask = BIT(4),
+			},
+			.od = {
+				.addr = 0x03,
+				.mask = BIT(3),
+			},
+		},
+		.batch = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.addr = 0x09,
+				.mask = GENMASK(3, 0),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.addr = 0x09,
+				.mask = GENMASK(7, 4),
+			},
+		},
+		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
+			.read_fifo = st_lsm6dsx_read_tagged_fifo,
+			.fifo_th = {
+				.addr = 0x07,
+				.mask = GENMASK(7, 0),
+			},
+			.fifo_diff = {
+				.addr = 0x1b,
+				.mask = GENMASK(8, 0),
+			},
+			.max_size = 512,
+			.th_wl = 1,
+		},
+		.ts_settings = {
+			.timer_en = {
+				.addr = 0x50,
+				.mask = BIT(6),
+			},
+			.decimator = {
+				.addr = 0x0a,
+				.mask = GENMASK(7, 6),
+			},
+			.freq_fine = 0x4f,
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.addr = 0x03,
+				.mask = BIT(6),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.num_ext_dev = 3,
+			.shub_out = {
+				.sec_page = true,
+				.addr = 0x02,
+			},
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+			.batch_en = BIT(3),
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x50,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5b,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x45,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
+	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSO16IS_ID,
+				.name = ST_LSM6DSO16IS_DEV_NAME,
+				.wai = 0x22,
+			}, {
+				.hw_id = ST_ISM330IS_ID,
+				.name = ST_ISM330IS_DEV_NAME,
+				.wai = 0x22,
+			}
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.num_ext_dev = 3,
+			.shub_out = {
+				.sec_page = true,
+				.addr = 0x02,
+			},
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+		},
+	},
+};
+
+int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	unsigned int data;
+	int err;
+
+	hub_settings = &hw->settings->shub_settings;
+	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask);
+	err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr,
+				 hub_settings->page_mux.mask, data);
+	usleep_range(100, 150);
+
+	return err;
+}
+
+static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
+				   const char **name)
+{
+	int err, i, j, data;
+
+	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) {
+		for (j = 0; j < ST_LSM6DSX_MAX_ID; j++) {
+			if (st_lsm6dsx_sensor_settings[i].id[j].name &&
+			    id == st_lsm6dsx_sensor_settings[i].id[j].hw_id)
+				break;
+		}
+		if (j < ST_LSM6DSX_MAX_ID)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(st_lsm6dsx_sensor_settings)) {
+		dev_err(hw->dev, "unsupported hw id [%02x]\n", id);
+		return -ENODEV;
+	}
+
+	err = regmap_read(hw->regmap, ST_LSM6DSX_REG_WHOAMI_ADDR, &data);
+	if (err < 0) {
+		dev_err(hw->dev, "failed to read whoami register\n");
+		return err;
+	}
+
+	if (data != st_lsm6dsx_sensor_settings[i].id[j].wai) {
+		dev_err(hw->dev, "unsupported whoami [%02x]\n", data);
+		return -ENODEV;
+	}
+
+	*name = st_lsm6dsx_sensor_settings[i].id[j].name;
+	hw->settings = &st_lsm6dsx_sensor_settings[i];
+
+	return 0;
+}
+
+static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
+				     u32 gain)
+{
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
+	unsigned int data;
+	int i, err;
+
+	fs_table = &sensor->hw->settings->fs_table[sensor->id];
+	for (i = 0; i < fs_table->fs_len; i++) {
+		if (fs_table->fs_avl[i].gain == gain)
+			break;
+	}
+
+	if (i == fs_table->fs_len)
+		return -EINVAL;
+
+	data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
+				    fs_table->reg.mask);
+	err = st_lsm6dsx_update_bits_locked(sensor->hw, fs_table->reg.addr,
+					    fs_table->reg.mask, data);
+	if (err < 0)
+		return err;
+
+	sensor->gain = gain;
+
+	return 0;
+}
+
+int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u32 odr, u8 *val)
+{
+	const struct st_lsm6dsx_odr_table_entry *odr_table;
+	int i;
+
+	odr_table = &sensor->hw->settings->odr_table[sensor->id];
+	for (i = 0; i < odr_table->odr_len; i++) {
+		/*
+		 * ext devices can run at different odr respect to
+		 * accel sensor
+		 */
+		if (odr_table->odr_avl[i].milli_hz >= odr)
+			break;
+	}
+
+	if (i == odr_table->odr_len)
+		return -EINVAL;
+
+	*val = odr_table->odr_avl[i].val;
+	return odr_table->odr_avl[i].milli_hz;
+}
+
+static int
+st_lsm6dsx_check_odr_dependency(struct st_lsm6dsx_hw *hw, u32 odr,
+				enum st_lsm6dsx_sensor_id id)
+{
+	struct st_lsm6dsx_sensor *ref = iio_priv(hw->iio_devs[id]);
+
+	if (odr > 0) {
+		if (hw->enable_mask & BIT(id))
+			return max_t(u32, ref->odr, odr);
+		else
+			return odr;
+	} else {
+		return (hw->enable_mask & BIT(id)) ? ref->odr : 0;
+	}
+}
+
+static int
+st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
+{
+	struct st_lsm6dsx_sensor *ref_sensor = sensor;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
+	u8 val = 0;
+	int err;
+
+	switch (sensor->id) {
+	case ST_LSM6DSX_ID_GYRO:
+		break;
+	case ST_LSM6DSX_ID_EXT0:
+	case ST_LSM6DSX_ID_EXT1:
+	case ST_LSM6DSX_ID_EXT2:
+	case ST_LSM6DSX_ID_ACC: {
+		u32 odr;
+		int i;
+
+		/*
+		 * i2c embedded controller relies on the accelerometer sensor as
+		 * bus read/write trigger so we need to enable accel device
+		 * at odr = max(accel_odr, ext_odr) in order to properly
+		 * communicate with i2c slave devices
+		 */
+		ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+		for (i = ST_LSM6DSX_ID_ACC; i < ST_LSM6DSX_ID_MAX; i++) {
+			if (!hw->iio_devs[i] || i == sensor->id)
+				continue;
+
+			odr = st_lsm6dsx_check_odr_dependency(hw, req_odr, i);
+			if (odr != req_odr)
+				/* device already configured */
+				return 0;
+		}
+		break;
+	}
+	default: /* should never occur */
+		return -EINVAL;
+	}
+
+	if (req_odr > 0) {
+		err = st_lsm6dsx_check_odr(ref_sensor, req_odr, &val);
+		if (err < 0)
+			return err;
+	}
+
+	reg = &hw->settings->odr_table[ref_sensor->id].reg;
+	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
+}
+
+static int
+__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+			       bool enable)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u32 odr = enable ? sensor->odr : 0;
+	int err;
+
+	err = st_lsm6dsx_set_odr(sensor, odr);
+	if (err < 0)
+		return err;
+
+	if (enable)
+		hw->enable_mask |= BIT(sensor->id);
+	else
+		hw->enable_mask &= ~BIT(sensor->id);
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
+		return 0;
+
+	return hw->enable_event;
+}
+
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+				 bool enable)
+{
+	if (st_lsm6dsx_check_events(sensor, enable))
+		return 0;
+
+	return __st_lsm6dsx_sensor_set_enable(sensor, enable);
+}
+
+static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
+				   u8 addr, int *val)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int err, delay;
+	__le16 data;
+
+	err = st_lsm6dsx_sensor_set_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	/*
+	 * we need to wait for sensor settling time before
+	 * reading data in order to avoid corrupted samples
+	 */
+	delay = 1000000000 / sensor->odr;
+	usleep_range(3 * delay, 4 * delay);
+
+	err = st_lsm6dsx_read_locked(hw, addr, &data, sizeof(data));
+	if (err < 0)
+		return err;
+
+	if (!hw->enable_event) {
+		err = st_lsm6dsx_sensor_set_enable(sensor, false);
+		if (err < 0)
+			return err;
+	}
+
+	*val = (s16)le16_to_cpu(data);
+
+	return IIO_VAL_INT;
+}
+
+static int st_lsm6dsx_read_raw(struct iio_dev *iio_dev,
+			       struct iio_chan_spec const *ch,
+			       int *val, int *val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(iio_dev);
+		if (ret)
+			break;
+
+		ret = st_lsm6dsx_read_oneshot(sensor, ch->address, val);
+		iio_device_release_direct_mode(iio_dev);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = sensor->odr / 1000;
+		*val2 = (sensor->odr % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = sensor->gain;
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
+				struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int err;
+
+	err = iio_device_claim_direct_mode(iio_dev);
+	if (err)
+		return err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		err = st_lsm6dsx_set_full_scale(sensor, val2);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		u8 data;
+
+		val = val * 1000 + val2 / 1000;
+		val = st_lsm6dsx_check_odr(sensor, val, &data);
+		if (val < 0)
+			err = val;
+		else
+			sensor->odr = val;
+		break;
+	}
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(iio_dev);
+
+	return err;
+}
+
+static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
+{
+	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
+	int err;
+
+	if (!hw->settings->irq_config.irq1_func.addr)
+		return -ENOTSUPP;
+
+	reg = &hw->settings->event_settings.enable_reg;
+	if (reg->addr) {
+		data = ST_LSM6DSX_SHIFT_VAL(state, reg->mask);
+		err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
+						    reg->mask, data);
+		if (err < 0)
+			return err;
+	}
+
+	/* Enable wakeup interrupt */
+	data = ST_LSM6DSX_SHIFT_VAL(state, hw->irq_routing->mask);
+	return st_lsm6dsx_update_bits_locked(hw, hw->irq_routing->addr,
+					     hw->irq_routing->mask, data);
+}
+
+static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info,
+				 int *val, int *val2)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	*val2 = 0;
+	*val = hw->event_threshold;
+
+	return IIO_VAL_INT;
+}
+
+static int
+st_lsm6dsx_write_event(struct iio_dev *iio_dev,
+		       const struct iio_chan_spec *chan,
+		       enum iio_event_type type,
+		       enum iio_event_direction dir,
+		       enum iio_event_info info,
+		       int val, int val2)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
+	int err;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	if (val < 0 || val > 31)
+		return -EINVAL;
+
+	reg = &hw->settings->event_settings.wakeup_reg;
+	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+	err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
+					    reg->mask, data);
+	if (err < 0)
+		return -EINVAL;
+
+	hw->event_threshold = val;
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
+			     const struct iio_chan_spec *chan,
+			     enum iio_event_type type,
+			     enum iio_event_direction dir)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	return !!(hw->enable_event & BIT(chan->channel2));
+}
+
+static int
+st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
+			      const struct iio_chan_spec *chan,
+			      enum iio_event_type type,
+			      enum iio_event_direction dir, int state)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 enable_event;
+	int err;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	if (state) {
+		enable_event = hw->enable_event | BIT(chan->channel2);
+
+		/* do not enable events if they are already enabled */
+		if (hw->enable_event)
+			goto out;
+	} else {
+		enable_event = hw->enable_event & ~BIT(chan->channel2);
+
+		/* only turn off sensor if no events is enabled */
+		if (enable_event)
+			goto out;
+	}
+
+	/* stop here if no changes have been made */
+	if (hw->enable_event == enable_event)
+		return 0;
+
+	err = st_lsm6dsx_event_setup(hw, state);
+	if (err < 0)
+		return err;
+
+	mutex_lock(&hw->conf_lock);
+	if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
+		err = __st_lsm6dsx_sensor_set_enable(sensor, state);
+	mutex_unlock(&hw->conf_lock);
+	if (err < 0)
+		return err;
+
+out:
+	hw->enable_event = enable_event;
+
+	return 0;
+}
+
+int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int err;
+
+	val = clamp_val(val, 1, hw->settings->fifo_ops.max_size);
+
+	mutex_lock(&hw->conf_lock);
+
+	err = st_lsm6dsx_update_watermark(sensor, val);
+
+	mutex_unlock(&hw->conf_lock);
+
+	if (err < 0)
+		return err;
+
+	sensor->watermark = val;
+
+	return 0;
+}
+
+static ssize_t
+st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_to_iio_dev(dev));
+	const struct st_lsm6dsx_odr_table_entry *odr_table;
+	int i, len = 0;
+
+	odr_table = &sensor->hw->settings->odr_table[sensor->id];
+	for (i = 0; i < odr_table->odr_len; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
+				 odr_table->odr_avl[i].milli_hz / 1000,
+				 odr_table->odr_avl[i].milli_hz % 1000);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_to_iio_dev(dev));
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int i, len = 0;
+
+	fs_table = &hw->settings->fs_table[sensor->id];
+	for (i = 0; i < fs_table->fs_len; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ",
+				 fs_table->fs_avl[i].gain);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static int st_lsm6dsx_write_raw_get_fmt(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+		case IIO_ACCEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_sysfs_sampling_frequency_avail);
+static IIO_DEVICE_ATTR(in_accel_scale_available, 0444,
+		       st_lsm6dsx_sysfs_scale_avail, NULL, 0);
+static IIO_DEVICE_ATTR(in_anglvel_scale_available, 0444,
+		       st_lsm6dsx_sysfs_scale_avail, NULL, 0);
+
+static struct attribute *st_lsm6dsx_acc_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_acc_attribute_group = {
+	.attrs = st_lsm6dsx_acc_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_acc_info = {
+	.attrs = &st_lsm6dsx_acc_attribute_group,
+	.read_raw = st_lsm6dsx_read_raw,
+	.write_raw = st_lsm6dsx_write_raw,
+	.read_event_value = st_lsm6dsx_read_event,
+	.write_event_value = st_lsm6dsx_write_event,
+	.read_event_config = st_lsm6dsx_read_event_config,
+	.write_event_config = st_lsm6dsx_write_event_config,
+	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+	.write_raw_get_fmt = st_lsm6dsx_write_raw_get_fmt,
+};
+
+static struct attribute *st_lsm6dsx_gyro_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_gyro_attribute_group = {
+	.attrs = st_lsm6dsx_gyro_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_gyro_info = {
+	.attrs = &st_lsm6dsx_gyro_attribute_group,
+	.read_raw = st_lsm6dsx_read_raw,
+	.write_raw = st_lsm6dsx_write_raw,
+	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+	.write_raw_get_fmt = st_lsm6dsx_write_raw_get_fmt,
+};
+
+static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
+{
+	struct device *dev = hw->dev;
+
+	if (!dev_fwnode(dev))
+		return -EINVAL;
+
+	return device_property_read_u32(dev, "st,drdy-int-pin", drdy_pin);
+}
+
+static int
+st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
+			const struct st_lsm6dsx_reg **drdy_reg)
+{
+	int err = 0, drdy_pin;
+
+	if (st_lsm6dsx_get_drdy_pin(hw, &drdy_pin) < 0) {
+		struct st_sensors_platform_data *pdata;
+		struct device *dev = hw->dev;
+
+		pdata = (struct st_sensors_platform_data *)dev->platform_data;
+		drdy_pin = pdata ? pdata->drdy_int_pin : 1;
+	}
+
+	switch (drdy_pin) {
+	case 1:
+		hw->irq_routing = &hw->settings->irq_config.irq1_func;
+		*drdy_reg = &hw->settings->irq_config.irq1;
+		break;
+	case 2:
+		hw->irq_routing = &hw->settings->irq_config.irq2_func;
+		*drdy_reg = &hw->settings->irq_config.irq2;
+		break;
+	default:
+		dev_err(hw->dev, "unsupported data ready pin\n");
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
+
+static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_sensors_platform_data *pdata;
+	struct device *dev = hw->dev;
+	unsigned int data;
+	int err = 0;
+
+	hub_settings = &hw->settings->shub_settings;
+
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
+	    (pdata && pdata->pullups)) {
+		if (hub_settings->pullup_en.sec_page) {
+			err = st_lsm6dsx_set_page(hw, true);
+			if (err < 0)
+				return err;
+		}
+
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
+		err = regmap_update_bits(hw->regmap,
+					 hub_settings->pullup_en.addr,
+					 hub_settings->pullup_en.mask, data);
+
+		if (hub_settings->pullup_en.sec_page)
+			st_lsm6dsx_set_page(hw, false);
+
+		if (err < 0)
+			return err;
+	}
+
+	if (hub_settings->aux_sens.addr) {
+		/* configure aux sensors */
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			return err;
+
+		data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask);
+		err = regmap_update_bits(hw->regmap,
+					 hub_settings->aux_sens.addr,
+					 hub_settings->aux_sens.mask, data);
+
+		st_lsm6dsx_set_page(hw, false);
+
+		if (err < 0)
+			return err;
+	}
+
+	if (hub_settings->emb_func.addr) {
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->emb_func.mask);
+		err = regmap_update_bits(hw->regmap,
+					 hub_settings->emb_func.addr,
+					 hub_settings->emb_func.mask, data);
+	}
+
+	return err;
+}
+
+static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_hw_ts_settings *ts_settings;
+	int err, val;
+
+	ts_settings = &hw->settings->ts_settings;
+	/* enable hw timestamp generation if necessary */
+	if (ts_settings->timer_en.addr) {
+		val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->timer_en.mask);
+		err = regmap_update_bits(hw->regmap,
+					 ts_settings->timer_en.addr,
+					 ts_settings->timer_en.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	/* enable high resolution for hw ts timer if necessary */
+	if (ts_settings->hr_timer.addr) {
+		val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->hr_timer.mask);
+		err = regmap_update_bits(hw->regmap,
+					 ts_settings->hr_timer.addr,
+					 ts_settings->hr_timer.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	/* enable ts queueing in FIFO if necessary */
+	if (ts_settings->fifo_en.addr) {
+		val = ST_LSM6DSX_SHIFT_VAL(1, ts_settings->fifo_en.mask);
+		err = regmap_update_bits(hw->regmap,
+					 ts_settings->fifo_en.addr,
+					 ts_settings->fifo_en.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	/* calibrate timestamp sensitivity */
+	hw->ts_gain = ST_LSM6DSX_TS_SENSITIVITY;
+	if (ts_settings->freq_fine) {
+		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
+		if (err < 0)
+			return err;
+
+		/*
+		 * linearize the AN5192 formula:
+		 * 1 / (1 + x) ~= 1 - x (Taylor’s Series)
+		 * ttrim[s] = 1 / (40000 * (1 + 0.0015 * val))
+		 * ttrim[ns] ~= 25000 - 37.5 * val
+		 * ttrim[ns] ~= 25000 - (37500 * val) / 1000
+		 */
+		hw->ts_gain -= ((s8)val * 37500) / 1000;
+	}
+
+	return 0;
+}
+
+static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_reg *reg;
+	int err;
+
+	/*
+	 * flush hw FIFO before device reset in order to avoid
+	 * possible races on interrupt line 1. If the first interrupt
+	 * line is asserted during hw reset the device will work in
+	 * I3C-only mode (if it is supported)
+	 */
+	err = st_lsm6dsx_flush_fifo(hw);
+	if (err < 0 && err != -ENOTSUPP)
+		return err;
+
+	/* device sw reset */
+	reg = &hw->settings->reset;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+	if (err < 0)
+		return err;
+
+	msleep(50);
+
+	/* reload trimming parameter */
+	reg = &hw->settings->boot;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+	if (err < 0)
+		return err;
+
+	msleep(50);
+
+	return 0;
+}
+
+static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_reg *reg;
+	int err;
+
+	err = st_lsm6dsx_reset_device(hw);
+	if (err < 0)
+		return err;
+
+	/* enable Block Data Update */
+	reg = &hw->settings->bdu;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+	if (err < 0)
+		return err;
+
+	/* enable FIFO watermak interrupt */
+	err = st_lsm6dsx_get_drdy_reg(hw, &reg);
+	if (err < 0)
+		return err;
+
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+	if (err < 0)
+		return err;
+
+	/* enable Latched interrupts for device events */
+	if (hw->settings->irq_config.lir.addr) {
+		reg = &hw->settings->irq_config.lir;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+		if (err < 0)
+			return err;
+
+		/* enable clear on read for latched interrupts */
+		if (hw->settings->irq_config.clear_on_read.addr) {
+			reg = &hw->settings->irq_config.clear_on_read;
+			err = regmap_update_bits(hw->regmap,
+					reg->addr, reg->mask,
+					ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+			if (err < 0)
+				return err;
+		}
+	}
+
+	/* enable drdy-mas if available */
+	if (hw->settings->drdy_mask.addr) {
+		reg = &hw->settings->drdy_mask;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+		if (err < 0)
+			return err;
+	}
+
+	err = st_lsm6dsx_init_shub(hw);
+	if (err < 0)
+		return err;
+
+	return st_lsm6dsx_init_hw_timer(hw);
+}
+
+static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
+					       enum st_lsm6dsx_sensor_id id,
+					       const char *name)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
+	if (!iio_dev)
+		return NULL;
+
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+	iio_dev->channels = hw->settings->channels[id].chan;
+	iio_dev->num_channels = hw->settings->channels[id].len;
+
+	sensor = iio_priv(iio_dev);
+	sensor->id = id;
+	sensor->hw = hw;
+	sensor->odr = hw->settings->odr_table[id].odr_avl[0].milli_hz;
+	sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
+	sensor->watermark = 1;
+
+	switch (id) {
+	case ST_LSM6DSX_ID_ACC:
+		iio_dev->info = &st_lsm6dsx_acc_info;
+		scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
+			  name);
+		break;
+	case ST_LSM6DSX_ID_GYRO:
+		iio_dev->info = &st_lsm6dsx_gyro_info;
+		scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
+			  name);
+		break;
+	default:
+		return NULL;
+	}
+	iio_dev->name = sensor->name;
+
+	return iio_dev;
+}
+
+static bool
+st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_event_settings *event_settings;
+	int err, data;
+	s64 timestamp;
+
+	if (!hw->enable_event)
+		return false;
+
+	event_settings = &hw->settings->event_settings;
+	err = st_lsm6dsx_read_locked(hw, event_settings->wakeup_src_reg,
+				     &data, sizeof(data));
+	if (err < 0)
+		return false;
+
+	timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	if ((data & hw->settings->event_settings.wakeup_src_z_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_Z)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Z,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+
+	if ((data & hw->settings->event_settings.wakeup_src_y_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_Y)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Y,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+
+	if ((data & hw->settings->event_settings.wakeup_src_x_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_X)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_X,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+
+	return data & event_settings->wakeup_src_status_mask;
+}
+
+static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
+{
+	struct st_lsm6dsx_hw *hw = private;
+	int fifo_len = 0, len;
+	bool event;
+
+	event = st_lsm6dsx_report_motion_event(hw);
+
+	if (!hw->settings->fifo_ops.read_fifo)
+		return event ? IRQ_HANDLED : IRQ_NONE;
+
+	/*
+	 * If we are using edge IRQs, new samples can arrive while
+	 * processing current interrupt since there are no hw
+	 * guarantees the irq line stays "low" long enough to properly
+	 * detect the new interrupt. In this case the new sample will
+	 * be missed.
+	 * Polling FIFO status register allow us to read new
+	 * samples even if the interrupt arrives while processing
+	 * previous data and the timeslot where the line is "low" is
+	 * too short to be properly detected.
+	 */
+	do {
+		mutex_lock(&hw->fifo_lock);
+		len = hw->settings->fifo_ops.read_fifo(hw);
+		mutex_unlock(&hw->fifo_lock);
+
+		if (len > 0)
+			fifo_len += len;
+	} while (len > 0);
+
+	return fifo_len || event ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t st_lsm6dsx_sw_trigger_handler_thread(int irq,
+							void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT2)
+		st_lsm6dsx_shub_read_output(hw,
+					    (u8 *)hw->scan[sensor->id].channels,
+					    sizeof(hw->scan[sensor->id].channels));
+	else
+		st_lsm6dsx_read_locked(hw, iio_dev->channels[0].address,
+				       hw->scan[sensor->id].channels,
+				       sizeof(hw->scan[sensor->id].channels));
+
+	iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan[sensor->id],
+					   iio_get_time_ns(iio_dev));
+	iio_trigger_notify_done(iio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
+{
+	struct st_sensors_platform_data *pdata;
+	const struct st_lsm6dsx_reg *reg;
+	struct device *dev = hw->dev;
+	unsigned long irq_type;
+	bool irq_active_low;
+	int err;
+
+	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_HIGH:
+	case IRQF_TRIGGER_RISING:
+		irq_active_low = false;
+		break;
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_FALLING:
+		irq_active_low = true;
+		break;
+	default:
+		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
+		return -EINVAL;
+	}
+
+	reg = &hw->settings->irq_config.hla;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(irq_active_low,
+						      reg->mask));
+	if (err < 0)
+		return err;
+
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "drive-open-drain")) ||
+	    (pdata && pdata->open_drain)) {
+		reg = &hw->settings->irq_config.od;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+		if (err < 0)
+			return err;
+
+		irq_type |= IRQF_SHARED;
+	}
+
+	err = devm_request_threaded_irq(hw->dev, hw->irq,
+					NULL,
+					st_lsm6dsx_handler_thread,
+					irq_type | IRQF_ONESHOT,
+					"lsm6dsx", hw);
+	if (err) {
+		dev_err(hw->dev, "failed to request trigger irq %d\n",
+			hw->irq);
+		return err;
+	}
+
+	return 0;
+}
+
+static int st_lsm6dsx_sw_buffer_preenable(struct iio_dev *iio_dev)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+
+	return st_lsm6dsx_device_set_enable(sensor, true);
+}
+
+static int st_lsm6dsx_sw_buffer_postdisable(struct iio_dev *iio_dev)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+
+	return st_lsm6dsx_device_set_enable(sensor, false);
+}
+
+static const struct iio_buffer_setup_ops st_lsm6dsx_sw_buffer_ops = {
+	.preenable = st_lsm6dsx_sw_buffer_preenable,
+	.postdisable = st_lsm6dsx_sw_buffer_postdisable,
+};
+
+static int st_lsm6dsx_sw_buffers_setup(struct st_lsm6dsx_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		int err;
+
+		if (!hw->iio_devs[i])
+			continue;
+
+		err = devm_iio_triggered_buffer_setup(hw->dev,
+					hw->iio_devs[i], NULL,
+					st_lsm6dsx_sw_trigger_handler_thread,
+					&st_lsm6dsx_sw_buffer_ops);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int st_lsm6dsx_init_regulators(struct device *dev)
+{
+	/* vdd-vddio power regulators */
+	static const char * const regulators[] = { "vdd", "vddio" };
+	int err;
+
+	err = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators),
+					     regulators);
+	if (err)
+		return dev_err_probe(dev, err, "failed to enable regulators\n");
+
+	msleep(50);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+
+static int lsm6dsx_get_acpi_mount_matrix(struct device *dev,
+					 struct iio_mount_matrix *orientation)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	union acpi_object *obj, *elements;
+	acpi_status status;
+	int i, j, val[3];
+	char *str;
+
+	if (!has_acpi_companion(dev))
+		return -EINVAL;
+
+	if (!acpi_has_method(adev->handle, "ROTM"))
+		return -EINVAL;
+
+	status = acpi_evaluate_object(adev->handle, "ROTM", NULL, &buffer);
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "Failed to get ACPI mount matrix: %d\n", status);
+		return -EINVAL;
+	}
+
+	obj = buffer.pointer;
+	if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 3)
+		goto unknown_format;
+
+	elements = obj->package.elements;
+	for (i = 0; i < 3; i++) {
+		if (elements[i].type != ACPI_TYPE_STRING)
+			goto unknown_format;
+
+		str = elements[i].string.pointer;
+		if (sscanf(str, "%d %d %d", &val[0], &val[1], &val[2]) != 3)
+			goto unknown_format;
+
+		for (j = 0; j < 3; j++) {
+			switch (val[j]) {
+			case -1: str = "-1"; break;
+			case 0:  str = "0";  break;
+			case 1:  str = "1";  break;
+			default: goto unknown_format;
+			}
+			orientation->rotation[i * 3 + j] = str;
+		}
+	}
+
+	kfree(buffer.pointer);
+	return 0;
+
+unknown_format:
+	dev_warn(dev, "Unknown ACPI mount matrix format, ignoring\n");
+	kfree(buffer.pointer);
+	return -EINVAL;
+}
+
+#else
+
+static int lsm6dsx_get_acpi_mount_matrix(struct device *dev,
+					  struct iio_mount_matrix *orientation)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
+
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
+		     struct regmap *regmap)
+{
+	struct st_sensors_platform_data *pdata = dev->platform_data;
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw;
+	const char *name = NULL;
+	int i, err;
+
+	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, (void *)hw);
+
+	mutex_init(&hw->fifo_lock);
+	mutex_init(&hw->conf_lock);
+	mutex_init(&hw->page_lock);
+
+	err = st_lsm6dsx_init_regulators(dev);
+	if (err)
+		return err;
+
+	hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
+	if (!hw->buff)
+		return -ENOMEM;
+
+	hw->dev = dev;
+	hw->irq = irq;
+	hw->regmap = regmap;
+
+	err = st_lsm6dsx_check_whoami(hw, hw_id, &name);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ST_LSM6DSX_ID_EXT0; i++) {
+		hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name);
+		if (!hw->iio_devs[i])
+			return -ENOMEM;
+	}
+
+	err = st_lsm6dsx_init_device(hw);
+	if (err < 0)
+		return err;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->master_en.addr &&
+	    (!dev_fwnode(dev) ||
+	     !device_property_read_bool(dev, "st,disable-sensor-hub"))) {
+		err = st_lsm6dsx_shub_probe(hw, name);
+		if (err < 0)
+			return err;
+	}
+
+	if (hw->irq > 0) {
+		err = st_lsm6dsx_irq_setup(hw);
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_fifo_setup(hw);
+		if (err < 0)
+			return err;
+	}
+
+	if (!hw->irq || !hw->settings->fifo_ops.read_fifo) {
+		/*
+		 * Rely on sw triggers (e.g. hr-timers) if irq pin is not
+		 * connected of if the device does not support HW FIFO
+		 */
+		err = st_lsm6dsx_sw_buffers_setup(hw);
+		if (err)
+			return err;
+	}
+
+	err = lsm6dsx_get_acpi_mount_matrix(hw->dev, &hw->orientation);
+	if (err) {
+		err = iio_read_mount_matrix(hw->dev, &hw->orientation);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		err = devm_iio_device_register(hw->dev, hw->iio_devs[i]);
+		if (err)
+			return err;
+	}
+
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "wakeup-source")) ||
+	    (pdata && pdata->wakeup_source))
+		device_init_wakeup(dev, true);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(st_lsm6dsx_probe, IIO_LSM6DSX);
+
+static int st_lsm6dsx_suspend(struct device *dev)
+{
+	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
+	struct st_lsm6dsx_sensor *sensor;
+	int i, err = 0;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		sensor = iio_priv(hw->iio_devs[i]);
+		if (!(hw->enable_mask & BIT(sensor->id)))
+			continue;
+
+		if (device_may_wakeup(dev) &&
+		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event) {
+			/* Enable wake from IRQ */
+			enable_irq_wake(hw->irq);
+			continue;
+		}
+
+		err = st_lsm6dsx_device_set_enable(sensor, false);
+		if (err < 0)
+			return err;
+
+		hw->suspend_mask |= BIT(sensor->id);
+	}
+
+	if (hw->fifo_mask)
+		err = st_lsm6dsx_flush_fifo(hw);
+
+	return err;
+}
+
+static int st_lsm6dsx_resume(struct device *dev)
+{
+	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
+	struct st_lsm6dsx_sensor *sensor;
+	int i, err = 0;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		sensor = iio_priv(hw->iio_devs[i]);
+		if (device_may_wakeup(dev) &&
+		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event)
+			disable_irq_wake(hw->irq);
+
+		if (!(hw->suspend_mask & BIT(sensor->id)))
+			continue;
+
+		err = st_lsm6dsx_device_set_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		hw->suspend_mask &= ~BIT(sensor->id);
+	}
+
+	if (hw->fifo_mask)
+		err = st_lsm6dsx_resume_fifo(hw);
+
+	return err;
+}
+
+EXPORT_NS_SIMPLE_DEV_PM_OPS(st_lsm6dsx_pm_ops, st_lsm6dsx_suspend,
+			    st_lsm6dsx_resume, IIO_LSM6DSX);
+
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
new file mode 100644
index 0000000000..911444ec57
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics st_lsm6dsx i2c driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct regmap_config st_lsm6dsx_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int st_lsm6dsx_i2c_probe(struct i2c_client *client)
+{
+	int hw_id;
+	struct regmap *regmap;
+
+	hw_id = (kernel_ulong_t)device_get_match_data(&client->dev);
+	if (!hw_id)
+		hw_id = i2c_client_get_device_id(client)->driver_data;
+	if (!hw_id)
+		return -EINVAL;
+
+	regmap = devm_regmap_init_i2c(client, &st_lsm6dsx_i2c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&client->dev, client->irq, hw_id, regmap);
+}
+
+static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
+	{
+		.compatible = "st,lsm6ds3",
+		.data = (void *)ST_LSM6DS3_ID,
+	},
+	{
+		.compatible = "st,lsm6ds3h",
+		.data = (void *)ST_LSM6DS3H_ID,
+	},
+	{
+		.compatible = "st,lsm6dsl",
+		.data = (void *)ST_LSM6DSL_ID,
+	},
+	{
+		.compatible = "st,lsm6dsm",
+		.data = (void *)ST_LSM6DSM_ID,
+	},
+	{
+		.compatible = "st,ism330dlc",
+		.data = (void *)ST_ISM330DLC_ID,
+	},
+	{
+		.compatible = "st,lsm6dso",
+		.data = (void *)ST_LSM6DSO_ID,
+	},
+	{
+		.compatible = "st,asm330lhh",
+		.data = (void *)ST_ASM330LHH_ID,
+	},
+	{
+		.compatible = "st,lsm6dsox",
+		.data = (void *)ST_LSM6DSOX_ID,
+	},
+	{
+		.compatible = "st,lsm6dsr",
+		.data = (void *)ST_LSM6DSR_ID,
+	},
+	{
+		.compatible = "st,lsm6ds3tr-c",
+		.data = (void *)ST_LSM6DS3TRC_ID,
+	},
+	{
+		.compatible = "st,ism330dhcx",
+		.data = (void *)ST_ISM330DHCX_ID,
+	},
+	{
+		.compatible = "st,lsm9ds1-imu",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
+	{
+		.compatible = "st,lsm6ds0",
+		.data = (void *)ST_LSM6DS0_ID,
+	},
+	{
+		.compatible = "st,lsm6dsrx",
+		.data = (void *)ST_LSM6DSRX_ID,
+	},
+	{
+		.compatible = "st,lsm6dst",
+		.data = (void *)ST_LSM6DST_ID,
+	},
+	{
+		.compatible = "st,lsm6dsop",
+		.data = (void *)ST_LSM6DSOP_ID,
+	},
+	{
+		.compatible = "st,asm330lhhx",
+		.data = (void *)ST_ASM330LHHX_ID,
+	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
+	{
+		.compatible = "st,lsm6dsv",
+		.data = (void *)ST_LSM6DSV_ID,
+	},
+	{
+		.compatible = "st,lsm6dsv16x",
+		.data = (void *)ST_LSM6DSV16X_ID,
+	},
+	{
+		.compatible = "st,lsm6dso16is",
+		.data = (void *)ST_LSM6DSO16IS_ID,
+	},
+	{
+		.compatible = "st,ism330is",
+		.data = (void *)ST_ISM330IS_ID,
+	},
+	{
+		.compatible = "st,asm330lhb",
+		.data = (void *)ST_ASM330LHB_ID,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
+
+static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
+	{ "SMO8B30", ST_LSM6DS3TRC_ID, },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
+
+static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
+	{ ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
+	{ ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID },
+	{ ST_LSM6DSL_DEV_NAME, ST_LSM6DSL_ID },
+	{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
+	{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
+	{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
+	{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
+	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
+	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
+	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
+	{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
+	{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
+	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
+	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
+	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
+	{ ST_LSM6DSV_DEV_NAME, ST_LSM6DSV_ID },
+	{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
+	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
+	{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
+	{ ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
+
+static struct i2c_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_i2c",
+		.pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
+		.of_match_table = st_lsm6dsx_i2c_of_match,
+		.acpi_match_table = st_lsm6dsx_i2c_acpi_match,
+	},
+	.probe = st_lsm6dsx_i2c_probe,
+	.id_table = st_lsm6dsx_i2c_id_table,
+};
+module_i2c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_LSM6DSX);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 0000000000..3b0c8b19c4
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <vitor.soares@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+	struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+							    st_lsm6dsx_i3c_ids);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&i3cdev->dev, "Failed to register i3c regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
+}
+
+static struct i3c_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_i3c",
+		.pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
+	},
+	.probe = st_lsm6dsx_i3c_probe,
+	.id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_LSM6DSX);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
new file mode 100644
index 0000000000..c1b444520d
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -0,0 +1,917 @@
+/*
+ * STMicroelectronics st_lsm6dsx i2c controller driver
+ *
+ * i2c controller embedded in lsm6dx series can connect up to four
+ * slave devices using accelerometer sensor as trigger for i2c
+ * read/write operations. Current implementation relies on SLV0 channel
+ * for slave configuration and SLV{1,2,3} to read data and push them into
+ * the hw FIFO
+ *
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/bitfield.h>
+
+#include "st_lsm6dsx.h"
+
+#define ST_LSM6DSX_SLV_ADDR(n, base)		((base) + (n) * 3)
+#define ST_LSM6DSX_SLV_SUB_ADDR(n, base)	((base) + 1 + (n) * 3)
+#define ST_LSM6DSX_SLV_CONFIG(n, base)		((base) + 2 + (n) * 3)
+
+#define ST_LS6DSX_READ_OP_MASK			GENMASK(2, 0)
+
+static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
+	/* LIS2MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x4f,
+			.val = 0x40,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(3, 2),
+			},
+			.odr_avl[0] = {  10000, 0x0 },
+			.odr_avl[1] = {  20000, 0x1 },
+			.odr_avl[2] = {  50000, 0x2 },
+			.odr_avl[3] = { 100000, 0x3 },
+			.odr_len = 4,
+		},
+		.fs_table = {
+			.fs_avl[0] = {
+				.gain = 1500,
+				.val = 0x0,
+			}, /* 1500 uG/LSB */
+			.fs_len = 1,
+		},
+		.temp_comp = {
+			.addr = 0x60,
+			.mask = BIT(7),
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.off_canc = {
+			.addr = 0x61,
+			.mask = BIT(1),
+		},
+		.bdu = {
+			.addr = 0x62,
+			.mask = BIT(4),
+		},
+		.out = {
+			.addr = 0x68,
+			.len = 6,
+		},
+	},
+	/* LIS3MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x0f,
+			.val = 0x3d,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x20,
+				.mask = GENMASK(4, 2),
+			},
+			.odr_avl[0] = {  1000, 0x0 },
+			.odr_avl[1] = {  2000, 0x1 },
+			.odr_avl[2] = {  3000, 0x2 },
+			.odr_avl[3] = {  5000, 0x3 },
+			.odr_avl[4] = { 10000, 0x4 },
+			.odr_avl[5] = { 20000, 0x5 },
+			.odr_avl[6] = { 40000, 0x6 },
+			.odr_avl[7] = { 80000, 0x7 },
+			.odr_len = 8,
+		},
+		.fs_table = {
+			.reg = {
+				.addr = 0x21,
+				.mask = GENMASK(6, 5),
+			},
+			.fs_avl[0] = {
+				.gain = 146,
+				.val = 0x00,
+			}, /* 4000 uG/LSB */
+			.fs_avl[1] = {
+				.gain = 292,
+				.val = 0x01,
+			}, /* 8000 uG/LSB */
+			.fs_avl[2] = {
+				.gain = 438,
+				.val = 0x02,
+			}, /* 12000 uG/LSB */
+			.fs_avl[3] = {
+				.gain = 584,
+				.val = 0x03,
+			}, /* 16000 uG/LSB */
+			.fs_len = 4,
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x22,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.bdu = {
+			.addr = 0x24,
+			.mask = BIT(6),
+		},
+		.out = {
+			.addr = 0x28,
+			.len = 6,
+		},
+	},
+};
+
+static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	u32 odr, timeout;
+
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
+	/* set 10ms as minimum timeout for i2c slave configuration */
+	timeout = max_t(u32, 2000000U / odr + 1, 10);
+	msleep(timeout);
+}
+
+/*
+ * st_lsm6dsx_shub_read_output - read i2c controller register
+ *
+ * Read st_lsm6dsx i2c controller register
+ */
+int st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	int err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->shub_out.sec_page) {
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			goto out;
+	}
+
+	err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr,
+			       data, len);
+
+	if (hub_settings->shub_out.sec_page)
+		st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/*
+ * st_lsm6dsx_shub_write_reg - write i2c controller register
+ *
+ * Write st_lsm6dsx i2c controller register
+ */
+static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr,
+				     u8 *data, int len)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_bulk_write(hw->regmap, addr, data, len);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int
+st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr,
+				    u8 mask, u8 val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_update_bits(hw->regmap, addr, mask, val);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
+					 bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	unsigned int data;
+	int err;
+
+	/* enable acc sensor as trigger */
+	err = st_lsm6dsx_sensor_set_enable(sensor, enable);
+	if (err < 0)
+		return err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->master_en.sec_page) {
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			goto out;
+	}
+
+	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
+	err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
+				 hub_settings->master_en.mask, data);
+
+	if (hub_settings->master_en.sec_page)
+		st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/*
+ * st_lsm6dsx_shub_read - read data from slave device register
+ *
+ * Read data from slave device register. SLV0 is used for
+ * one-shot read operation
+ */
+static int
+st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		     u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	u8 config[3], slv_addr, slv_config = 0;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *aux_sens;
+	int err;
+
+	hub_settings = &hw->settings->shub_settings;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	aux_sens = &hw->settings->shub_settings.aux_sens;
+	/* do not overwrite aux_sens */
+	if (slv_addr + 2 == aux_sens->addr)
+		slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+
+	config[0] = (sensor->ext_info.addr << 1) | 1;
+	config[1] = addr;
+	config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config;
+
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_shub_master_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_wait_complete(hw);
+
+	err = st_lsm6dsx_shub_read_output(hw, data,
+					  len & ST_LS6DSX_READ_OP_MASK);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_master_enable(sensor, false);
+
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	config[2] = slv_config;
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+/*
+ * st_lsm6dsx_shub_write - write data to slave device register
+ *
+ * Write data from slave device register. SLV0 is used for
+ * one-shot write operation
+ */
+static int
+st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		      u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 config[2], slv_addr;
+	int err, i;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->wr_once.addr) {
+		unsigned int data;
+
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask);
+		err = st_lsm6dsx_shub_write_reg_with_mask(hw,
+			hub_settings->wr_once.addr,
+			hub_settings->wr_once.mask,
+			data);
+		if (err < 0)
+			return err;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	config[0] = sensor->ext_info.addr << 1;
+	for (i = 0 ; i < len; i++) {
+		config[1] = addr + i;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr,
+						&data[i], 1);
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+	}
+
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
+}
+
+static int
+st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
+				u8 addr, u8 mask, u8 val)
+{
+	int err;
+	u8 data;
+
+	err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data));
+	if (err < 0)
+		return err;
+
+	data = ((data & ~mask) | (val << __ffs(mask) & mask));
+
+	return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
+}
+
+static int
+st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
+			    u32 odr, u16 *val)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		if (settings->odr_table.odr_avl[i].milli_hz == odr)
+			break;
+	}
+
+	if (i == settings->odr_table.odr_len)
+		return -EINVAL;
+
+	*val = settings->odr_table.odr_avl[i].val;
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u16 val;
+	int err;
+
+	err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	return st_lsm6dsx_shub_write_with_mask(sensor,
+					       settings->odr_table.reg.addr,
+					       settings->odr_table.reg.mask,
+					       val);
+}
+
+/* use SLV{1,2,3} for FIFO read operations */
+static int
+st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor,
+				bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u8 config[9] = {}, enable_mask, slv_addr;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	struct st_lsm6dsx_sensor *cur_sensor;
+	int i, j = 0;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (enable)
+		enable_mask = hw->enable_mask | BIT(sensor->id);
+	else
+		enable_mask = hw->enable_mask & ~BIT(sensor->id);
+
+	for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		cur_sensor = iio_priv(hw->iio_devs[i]);
+		if (!(enable_mask & BIT(cur_sensor->id)))
+			continue;
+
+		settings = cur_sensor->ext_info.settings;
+		config[j] = (sensor->ext_info.addr << 1) | 1;
+		config[j + 1] = settings->out.addr;
+		config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) |
+				hub_settings->batch_en;
+		j += 3;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr);
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	err = st_lsm6dsx_shub_config_channels(sensor, enable);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	if (enable) {
+		err = st_lsm6dsx_shub_set_odr(sensor,
+					      sensor->ext_info.slv_odr);
+		if (err < 0)
+			return err;
+	} else {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->odr_table.reg.addr,
+					settings->odr_table.reg.mask, 0);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->pwr_table.reg.addr) {
+		u8 val;
+
+		val = enable ? settings->pwr_table.on_val
+			     : settings->pwr_table.off_val;
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->pwr_table.reg.addr,
+					settings->pwr_table.reg.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	return st_lsm6dsx_shub_master_enable(sensor, enable);
+}
+
+static int
+st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
+			     struct iio_chan_spec const *ch,
+			     int *val)
+{
+	int err, delay, len;
+	u8 data[4];
+
+	err = st_lsm6dsx_shub_set_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	delay = 1000000000 / sensor->ext_info.slv_odr;
+	usleep_range(delay, 2 * delay);
+
+	len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
+	err = st_lsm6dsx_shub_read(sensor, ch->address, data, len);
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_shub_set_enable(sensor, false);
+	if (err < 0)
+		return err;
+
+	switch (len) {
+	case 2:
+		*val = (s16)le16_to_cpu(*((__le16 *)data));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int
+st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
+			 struct iio_chan_spec const *ch,
+			 int *val, int *val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(iio_dev);
+		if (ret)
+			break;
+
+		ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val);
+		iio_device_release_direct_mode(iio_dev);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = sensor->ext_info.slv_odr / 1000;
+		*val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = sensor->gain;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int
+st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
+			       u32 gain)
+{
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
+	int i, err;
+
+	fs_table = &sensor->ext_info.settings->fs_table;
+	if (!fs_table->reg.addr)
+		return -ENOTSUPP;
+
+	for (i = 0; i < fs_table->fs_len; i++) {
+		if (fs_table->fs_avl[i].gain == gain)
+			break;
+	}
+
+	if (i == fs_table->fs_len)
+		return -EINVAL;
+
+	err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
+					      fs_table->reg.mask,
+					      fs_table->fs_avl[i].val);
+	if (err < 0)
+		return err;
+
+	sensor->gain = gain;
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
+			  struct iio_chan_spec const *chan,
+			  int val, int val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int err;
+
+	err = iio_device_claim_direct_mode(iio_dev);
+	if (err)
+		return err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		u16 data;
+
+		val = val * 1000 + val2 / 1000;
+		err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
+		if (!err) {
+			struct st_lsm6dsx_hw *hw = sensor->hw;
+			struct st_lsm6dsx_sensor *ref_sensor;
+			u8 odr_val;
+			int odr;
+
+			ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+			odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+			if (odr < 0) {
+				err = odr;
+				goto release;
+			}
+
+			sensor->ext_info.slv_odr = val;
+			sensor->odr = odr;
+		}
+		break;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+release:
+	iio_device_release_direct_mode(iio_dev);
+
+	return err;
+}
+
+static ssize_t
+st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		u32 val = settings->odr_table.odr_avl[i].milli_hz;
+
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
+				 val / 1000, val % 1000);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->fs_table.fs_len; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+				 settings->fs_table.fs_avl[i].gain);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail);
+static IIO_DEVICE_ATTR(in_scale_available, 0444,
+		       st_lsm6dsx_shub_scale_avail, NULL, 0);
+static struct attribute *st_lsm6dsx_shub_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_shub_attribute_group = {
+	.attrs = st_lsm6dsx_shub_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_shub_info = {
+	.attrs = &st_lsm6dsx_shub_attribute_group,
+	.read_raw = st_lsm6dsx_shub_read_raw,
+	.write_raw = st_lsm6dsx_shub_write_raw,
+	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+};
+
+static struct iio_dev *
+st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
+			     enum st_lsm6dsx_sensor_id id,
+			     const struct st_lsm6dsx_ext_dev_settings *info,
+			     u8 i2c_addr, const char *name)
+{
+	enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
+	struct iio_chan_spec *ext_channels;
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
+	if (!iio_dev)
+		return NULL;
+
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->info = &st_lsm6dsx_shub_info;
+
+	sensor = iio_priv(iio_dev);
+	sensor->id = id;
+	sensor->hw = hw;
+	sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+	sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
+	sensor->gain = info->fs_table.fs_avl[0].gain;
+	sensor->ext_info.settings = info;
+	sensor->ext_info.addr = i2c_addr;
+	sensor->watermark = 1;
+
+	switch (info->id) {
+	case ST_LSM6DSX_ID_MAGN: {
+		const struct iio_chan_spec magn_channels[] = {
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr,
+					   IIO_MOD_X, 0),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2,
+					   IIO_MOD_Y, 1),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4,
+					   IIO_MOD_Z, 2),
+			IIO_CHAN_SOFT_TIMESTAMP(3),
+		};
+
+		ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels),
+					    GFP_KERNEL);
+		if (!ext_channels)
+			return NULL;
+
+		memcpy(ext_channels, magn_channels, sizeof(magn_channels));
+		iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+		iio_dev->channels = ext_channels;
+		iio_dev->num_channels = ARRAY_SIZE(magn_channels);
+
+		scnprintf(sensor->name, sizeof(sensor->name), "%s_magn",
+			  name);
+		break;
+	}
+	default:
+		return NULL;
+	}
+	iio_dev->name = sensor->name;
+
+	return iio_dev;
+}
+
+static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	settings = sensor->ext_info.settings;
+	if (settings->bdu.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+						      settings->bdu.addr,
+						      settings->bdu.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->temp_comp.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->temp_comp.addr,
+					settings->temp_comp.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->off_canc.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->off_canc.addr,
+					settings->off_canc.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
+			  const struct st_lsm6dsx_ext_dev_settings *settings)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	u8 config[3], data, slv_addr, slv_config = 0;
+	const struct st_lsm6dsx_reg *aux_sens;
+	struct st_lsm6dsx_sensor *sensor;
+	bool found = false;
+	int i, err;
+
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	hub_settings = &hw->settings->shub_settings;
+	aux_sens = &hw->settings->shub_settings.aux_sens;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	/* do not overwrite aux_sens */
+	if (slv_addr + 2 == aux_sens->addr)
+		slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+
+	for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
+		if (!settings->i2c_addr[i])
+			continue;
+
+		/* read wai slave register */
+		config[0] = (settings->i2c_addr[i] << 1) | 0x1;
+		config[1] = settings->wai.addr;
+		config[2] = 0x1 | slv_config;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+
+		if (err < 0)
+			return err;
+
+		if (data != settings->wai.val)
+			continue;
+
+		*i2c_addr = settings->i2c_addr[i];
+		found = true;
+		break;
+	}
+
+	/* reset SLV0 channel */
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	config[2] = slv_config;
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	return found ? 0 : -ENODEV;
+}
+
+int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
+{
+	enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0;
+	struct st_lsm6dsx_sensor *sensor;
+	int err, i, num_ext_dev = 0;
+	u8 i2c_addr = 0;
+
+	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) {
+		err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr,
+					&st_lsm6dsx_ext_dev_table[i]);
+		if (err == -ENODEV)
+			continue;
+		else if (err < 0)
+			return err;
+
+		hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id,
+						&st_lsm6dsx_ext_dev_table[i],
+						i2c_addr, name);
+		if (!hw->iio_devs[id])
+			return -ENOMEM;
+
+		sensor = iio_priv(hw->iio_devs[id]);
+		err = st_lsm6dsx_shub_init_device(sensor);
+		if (err < 0)
+			return err;
+
+		if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev)
+			break;
+		id++;
+	}
+
+	return 0;
+}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
new file mode 100644
index 0000000000..f56c170c41
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics st_lsm6dsx spi driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct regmap_config st_lsm6dsx_spi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int st_lsm6dsx_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	int hw_id = id->driver_data;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &st_lsm6dsx_spi_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&spi->dev, spi->irq, hw_id, regmap);
+}
+
+static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
+	{
+		.compatible = "st,lsm6ds3",
+		.data = (void *)ST_LSM6DS3_ID,
+	},
+	{
+		.compatible = "st,lsm6ds3h",
+		.data = (void *)ST_LSM6DS3H_ID,
+	},
+	{
+		.compatible = "st,lsm6dsl",
+		.data = (void *)ST_LSM6DSL_ID,
+	},
+	{
+		.compatible = "st,lsm6dsm",
+		.data = (void *)ST_LSM6DSM_ID,
+	},
+	{
+		.compatible = "st,ism330dlc",
+		.data = (void *)ST_ISM330DLC_ID,
+	},
+	{
+		.compatible = "st,lsm6dso",
+		.data = (void *)ST_LSM6DSO_ID,
+	},
+	{
+		.compatible = "st,asm330lhh",
+		.data = (void *)ST_ASM330LHH_ID,
+	},
+	{
+		.compatible = "st,lsm6dsox",
+		.data = (void *)ST_LSM6DSOX_ID,
+	},
+	{
+		.compatible = "st,lsm6dsr",
+		.data = (void *)ST_LSM6DSR_ID,
+	},
+	{
+		.compatible = "st,lsm6ds3tr-c",
+		.data = (void *)ST_LSM6DS3TRC_ID,
+	},
+	{
+		.compatible = "st,ism330dhcx",
+		.data = (void *)ST_ISM330DHCX_ID,
+	},
+	{
+		.compatible = "st,lsm9ds1-imu",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
+	{
+		.compatible = "st,lsm6ds0",
+		.data = (void *)ST_LSM6DS0_ID,
+	},
+	{
+		.compatible = "st,lsm6dsrx",
+		.data = (void *)ST_LSM6DSRX_ID,
+	},
+	{
+		.compatible = "st,lsm6dst",
+		.data = (void *)ST_LSM6DST_ID,
+	},
+	{
+		.compatible = "st,lsm6dsop",
+		.data = (void *)ST_LSM6DSOP_ID,
+	},
+	{
+		.compatible = "st,asm330lhhx",
+		.data = (void *)ST_ASM330LHHX_ID,
+	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
+	{
+		.compatible = "st,lsm6dsv",
+		.data = (void *)ST_LSM6DSV_ID,
+	},
+	{
+		.compatible = "st,lsm6dsv16x",
+		.data = (void *)ST_LSM6DSV16X_ID,
+	},
+	{
+		.compatible = "st,lsm6dso16is",
+		.data = (void *)ST_LSM6DSO16IS_ID,
+	},
+	{
+		.compatible = "st,ism330is",
+		.data = (void *)ST_ISM330IS_ID,
+	},
+	{
+		.compatible = "st,asm330lhb",
+		.data = (void *)ST_ASM330LHB_ID,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
+
+static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
+	{ ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
+	{ ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID },
+	{ ST_LSM6DSL_DEV_NAME, ST_LSM6DSL_ID },
+	{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
+	{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
+	{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
+	{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
+	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
+	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
+	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
+	{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
+	{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
+	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
+	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
+	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
+	{ ST_LSM6DSV_DEV_NAME, ST_LSM6DSV_ID },
+	{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
+	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
+	{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
+	{ ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
+
+static struct spi_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_spi",
+		.pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
+		.of_match_table = st_lsm6dsx_spi_of_match,
+	},
+	.probe = st_lsm6dsx_spi_probe,
+	.id_table = st_lsm6dsx_spi_id_table,
+};
+module_spi_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx spi driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_LSM6DSX);
diff --git a/drivers/iio/imu/st_lsm9ds0/Kconfig b/drivers/iio/imu/st_lsm9ds0/Kconfig
new file mode 100644
index 0000000000..7aef714b6e
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/Kconfig
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config IIO_ST_LSM9DS0
+	tristate "STMicroelectronics LSM9DS0 IMU driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	depends on !SENSORS_LIS3_I2C
+	depends on !SENSORS_LIS3_SPI
+	select IIO_ST_ACCEL_3AXIS
+	select IIO_ST_MAGN_3AXIS
+
+	help
+	  Say yes here to build support for STMicroelectronics LSM9DS0 IMU
+	  sensor. Supported devices: accelerometer/magnetometer of lsm9ds0
+	  and lsm303d.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called st_lsm9ds0.
+
+	  Also need to enable at least one of I2C and SPI interface drivers
+
+config IIO_ST_LSM9DS0_I2C
+	tristate "STMicroelectronics LSM9DS0 IMU I2C interface"
+	depends on I2C && IIO_ST_LSM9DS0
+	default I2C && IIO_ST_LSM9DS0
+	select IIO_ST_ACCEL_I2C_3AXIS
+	select IIO_ST_MAGN_I2C_3AXIS
+	select REGMAP_I2C
+	help
+	  Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_lsm9ds0_i2c.
+
+config IIO_ST_LSM9DS0_SPI
+	tristate "STMicroelectronics LSM9DS0 IMU SPI interface"
+	depends on SPI_MASTER && IIO_ST_LSM9DS0
+	default SPI_MASTER && IIO_ST_LSM9DS0
+	select IIO_ST_ACCEL_SPI_3AXIS
+	select IIO_ST_MAGN_SPI_3AXIS
+	select REGMAP_SPI
+	help
+	  Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_lsm9ds0_spi.
diff --git a/drivers/iio/imu/st_lsm9ds0/Makefile b/drivers/iio/imu/st_lsm9ds0/Makefile
new file mode 100644
index 0000000000..488af523f6
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_IIO_ST_LSM9DS0) += st_lsm9ds0.o
+st_lsm9ds0-y := st_lsm9ds0_core.o
+obj-$(CONFIG_IIO_ST_LSM9DS0_I2C) += st_lsm9ds0_i2c.o
+obj-$(CONFIG_IIO_ST_LSM9DS0_SPI) += st_lsm9ds0_spi.o
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h
new file mode 100644
index 0000000000..76678cdefb
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+// STMicroelectronics LSM9DS0 IMU driver
+
+#ifndef ST_LSM9DS0_H
+#define ST_LSM9DS0_H
+
+struct iio_dev;
+struct regulator;
+
+struct st_lsm9ds0 {
+	struct device *dev;
+	const char *name;
+	int irq;
+	struct iio_dev *accel;
+	struct iio_dev *magn;
+	struct regulator *vdd;
+	struct regulator *vdd_io;
+};
+
+int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap);
+
+#endif /* ST_LSM9DS0_H */
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
new file mode 100644
index 0000000000..e887b45cdb
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/iio.h>
+
+#include "st_lsm9ds0.h"
+
+static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	const struct st_sensor_settings *settings;
+	struct device *dev = lsm9ds0->dev;
+	struct st_sensor_data *data;
+
+	settings = st_accel_get_settings(lsm9ds0->name);
+	if (!settings) {
+		dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name);
+		return -ENODEV;
+	}
+
+	lsm9ds0->accel = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!lsm9ds0->accel)
+		return -ENOMEM;
+
+	lsm9ds0->accel->name = lsm9ds0->name;
+
+	data = iio_priv(lsm9ds0->accel);
+	data->sensor_settings = (struct st_sensor_settings *)settings;
+	data->irq = lsm9ds0->irq;
+	data->regmap = regmap;
+
+	return st_accel_common_probe(lsm9ds0->accel);
+}
+
+static int st_lsm9ds0_probe_magn(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	const struct st_sensor_settings *settings;
+	struct device *dev = lsm9ds0->dev;
+	struct st_sensor_data *data;
+
+	settings = st_magn_get_settings(lsm9ds0->name);
+	if (!settings) {
+		dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name);
+		return -ENODEV;
+	}
+
+	lsm9ds0->magn = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!lsm9ds0->magn)
+		return -ENOMEM;
+
+	lsm9ds0->magn->name = lsm9ds0->name;
+
+	data = iio_priv(lsm9ds0->magn);
+	data->sensor_settings = (struct st_sensor_settings *)settings;
+	data->irq = lsm9ds0->irq;
+	data->regmap = regmap;
+
+	return st_magn_common_probe(lsm9ds0->magn);
+}
+
+int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	struct device *dev = lsm9ds0->dev;
+	static const char * const regulator_names[] = { "vdd", "vddio" };
+	int ret;
+
+	/* Regulators not mandatory, but if requested we should enable them. */
+	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names),
+					     regulator_names);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "unable to enable Vdd supply\n");
+
+	/* Setup accelerometer device */
+	ret = st_lsm9ds0_probe_accel(lsm9ds0, regmap);
+	if (ret)
+		return ret;
+
+	/* Setup magnetometer device */
+	return st_lsm9ds0_probe_magn(lsm9ds0, regmap);
+}
+EXPORT_SYMBOL_NS_GPL(st_lsm9ds0_probe, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
new file mode 100644
index 0000000000..61d855083a
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/st_sensors_i2c.h>
+
+#include "st_lsm9ds0.h"
+
+static const struct of_device_id st_lsm9ds0_of_match[] = {
+	{
+		.compatible = "st,lsm303d-imu",
+		.data = LSM303D_IMU_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm9ds0-imu",
+		.data = LSM9DS0_IMU_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
+
+static const struct i2c_device_id st_lsm9ds0_id_table[] = {
+	{ LSM303D_IMU_DEV_NAME },
+	{ LSM9DS0_IMU_DEV_NAME },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
+
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+	{"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+
+static const struct regmap_config st_lsm9ds0_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.read_flag_mask	= 0x80,
+};
+
+static int st_lsm9ds0_i2c_probe(struct i2c_client *client)
+{
+	const struct regmap_config *config = &st_lsm9ds0_regmap_config;
+	struct device *dev = &client->dev;
+	struct st_lsm9ds0 *lsm9ds0;
+	struct regmap *regmap;
+
+	st_sensors_dev_name_probe(dev, client->name, sizeof(client->name));
+
+	lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL);
+	if (!lsm9ds0)
+		return -ENOMEM;
+
+	lsm9ds0->dev = dev;
+	lsm9ds0->name = client->name;
+	lsm9ds0->irq = client->irq;
+
+	regmap = devm_regmap_init_i2c(client, config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	i2c_set_clientdata(client, lsm9ds0);
+
+	return st_lsm9ds0_probe(lsm9ds0, regmap);
+}
+
+static struct i2c_driver st_lsm9ds0_driver = {
+	.driver = {
+		.name = "st-lsm9ds0-i2c",
+		.of_match_table = st_lsm9ds0_of_match,
+		.acpi_match_table = st_lsm9ds0_acpi_match,
+	},
+	.probe = st_lsm9ds0_i2c_probe,
+	.id_table = st_lsm9ds0_id_table,
+};
+module_i2c_driver(st_lsm9ds0_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU I2C driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
new file mode 100644
index 0000000000..8cc041d56c
--- /dev/null
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/common/st_sensors_spi.h>
+
+#include "st_lsm9ds0.h"
+
+static const struct of_device_id st_lsm9ds0_of_match[] = {
+	{
+		.compatible = "st,lsm303d-imu",
+		.data = LSM303D_IMU_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm9ds0-imu",
+		.data = LSM9DS0_IMU_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
+
+static const struct spi_device_id st_lsm9ds0_id_table[] = {
+	{ LSM303D_IMU_DEV_NAME },
+	{ LSM9DS0_IMU_DEV_NAME },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table);
+
+static const struct regmap_config st_lsm9ds0_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.read_flag_mask	= 0xc0,
+};
+
+static int st_lsm9ds0_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct st_lsm9ds0 *lsm9ds0;
+	struct regmap *regmap;
+
+	st_sensors_dev_name_probe(dev, spi->modalias, sizeof(spi->modalias));
+
+	lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL);
+	if (!lsm9ds0)
+		return -ENOMEM;
+
+	lsm9ds0->dev = dev;
+	lsm9ds0->name = spi->modalias;
+	lsm9ds0->irq = spi->irq;
+
+	regmap = devm_regmap_init_spi(spi, &st_lsm9ds0_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	spi_set_drvdata(spi, lsm9ds0);
+
+	return st_lsm9ds0_probe(lsm9ds0, regmap);
+}
+
+static struct spi_driver st_lsm9ds0_driver = {
+	.driver = {
+		.name = "st-lsm9ds0-spi",
+		.of_match_table = st_lsm9ds0_of_match,
+	},
+	.probe = st_lsm9ds0_spi_probe,
+	.id_table = st_lsm9ds0_id_table,
+};
+module_spi_driver(st_lsm9ds0_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU SPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);