Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 953 insertions, 0 deletions

diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
new file mode 100644
index 0000000000..02ad11611b
--- /dev/null
+++ b/drivers/iio/light/tsl2583.c
@@ -0,0 +1,953 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583).
+ *
+ * Copyright (c) 2011, TAOS Corporation.
+ * Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/pm_runtime.h>
+
+/* Device Registers and Masks */
+#define TSL2583_CNTRL			0x00
+#define TSL2583_ALS_TIME		0X01
+#define TSL2583_INTERRUPT		0x02
+#define TSL2583_GAIN			0x07
+#define TSL2583_REVID			0x11
+#define TSL2583_CHIPID			0x12
+#define TSL2583_ALS_CHAN0LO		0x14
+#define TSL2583_ALS_CHAN0HI		0x15
+#define TSL2583_ALS_CHAN1LO		0x16
+#define TSL2583_ALS_CHAN1HI		0x17
+#define TSL2583_TMR_LO			0x18
+#define TSL2583_TMR_HI			0x19
+
+/* tsl2583 cmd reg masks */
+#define TSL2583_CMD_REG			0x80
+#define TSL2583_CMD_SPL_FN		0x60
+#define TSL2583_CMD_ALS_INT_CLR		0x01
+
+/* tsl2583 cntrl reg masks */
+#define TSL2583_CNTL_ADC_ENBL		0x02
+#define TSL2583_CNTL_PWR_OFF		0x00
+#define TSL2583_CNTL_PWR_ON		0x01
+
+/* tsl2583 status reg masks */
+#define TSL2583_STA_ADC_VALID		0x01
+#define TSL2583_STA_ADC_INTR		0x10
+
+/* Lux calculation constants */
+#define TSL2583_LUX_CALC_OVER_FLOW	65535
+
+#define TSL2583_INTERRUPT_DISABLED	0x00
+
+#define TSL2583_CHIP_ID			0x90
+#define TSL2583_CHIP_ID_MASK		0xf0
+
+#define TSL2583_POWER_OFF_DELAY_MS	2000
+
+/* Per-device data */
+struct tsl2583_als_info {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 lux;
+};
+
+struct tsl2583_lux {
+	unsigned int ratio;
+	unsigned int ch0;
+	unsigned int ch1;
+};
+
+static const struct tsl2583_lux tsl2583_default_lux[] = {
+	{  9830,  8520, 15729 },
+	{ 12452, 10807, 23344 },
+	{ 14746,  6383, 11705 },
+	{ 17695,  4063,  6554 },
+	{     0,     0,     0 }  /* Termination segment */
+};
+
+#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
+
+struct tsl2583_settings {
+	int als_time;
+	int als_gain;
+	int als_gain_trim;
+	int als_cal_target;
+
+	/*
+	 * This structure is intentionally large to accommodate updates via
+	 * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
+	 * Assumption is that one and only one type of glass used.
+	 */
+	struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
+};
+
+struct tsl2583_chip {
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	struct tsl2583_als_info als_cur_info;
+	struct tsl2583_settings als_settings;
+	int als_time_scale;
+	int als_saturation;
+};
+
+struct gainadj {
+	s16 ch0;
+	s16 ch1;
+	s16 mean;
+};
+
+/* Index = (0 - 3) Used to validate the gain selection index */
+static const struct gainadj gainadj[] = {
+	{ 1, 1, 1 },
+	{ 8, 8, 8 },
+	{ 16, 16, 16 },
+	{ 107, 115, 111 }
+};
+
+/*
+ * Provides initial operational parameter defaults.
+ * These defaults may be changed through the device's sysfs files.
+ */
+static void tsl2583_defaults(struct tsl2583_chip *chip)
+{
+	/*
+	 * The integration time must be a multiple of 50ms and within the
+	 * range [50, 600] ms.
+	 */
+	chip->als_settings.als_time = 100;
+
+	/*
+	 * This is an index into the gainadj table. Assume clear glass as the
+	 * default.
+	 */
+	chip->als_settings.als_gain = 0;
+
+	/* Default gain trim to account for aperture effects */
+	chip->als_settings.als_gain_trim = 1000;
+
+	/* Known external ALS reading used for calibration */
+	chip->als_settings.als_cal_target = 130;
+
+	/* Default lux table. */
+	memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
+	       sizeof(tsl2583_default_lux));
+}
+
+/*
+ * Reads and calculates current lux value.
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
+ * declared above is then scanned to find the first ratio value that is just
+ * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
+ * the array are then used along with the time scale factor array values, to
+ * calculate the lux.
+ */
+static int tsl2583_get_lux(struct iio_dev *indio_dev)
+{
+	u16 ch0, ch1; /* separated ch0/ch1 data from device */
+	u32 lux; /* raw lux calculated from device data */
+	u64 lux64;
+	u32 ratio;
+	u8 buf[5];
+	struct tsl2583_lux *p;
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int i, ret;
+
+	ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
+			__func__);
+		goto done;
+	}
+
+	/* is data new & valid */
+	if (!(ret & TSL2583_STA_ADC_INTR)) {
+		dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
+			__func__);
+		ret = chip->als_cur_info.lux; /* return LAST VALUE */
+		goto done;
+	}
+
+	for (i = 0; i < 4; i++) {
+		int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
+
+		ret = i2c_smbus_read_byte_data(chip->client, reg);
+		if (ret < 0) {
+			dev_err(&chip->client->dev, "%s: failed to read register %x\n",
+				__func__, reg);
+			goto done;
+		}
+		buf[i] = ret;
+	}
+
+	/*
+	 * Clear the pending interrupt status bit on the chip to allow the next
+	 * integration cycle to start. This has to be done even though this
+	 * driver currently does not support interrupts.
+	 */
+	ret = i2c_smbus_write_byte(chip->client,
+				   (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
+				    TSL2583_CMD_ALS_INT_CLR));
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
+			__func__);
+		goto done; /* have no data, so return failure */
+	}
+
+	/* extract ALS/lux data */
+	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+	chip->als_cur_info.als_ch0 = ch0;
+	chip->als_cur_info.als_ch1 = ch1;
+
+	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation))
+		goto return_max;
+
+	if (!ch0) {
+		/*
+		 * The sensor appears to be in total darkness so set the
+		 * calculated lux to 0 and return early to avoid a division by
+		 * zero below when calculating the ratio.
+		 */
+		ret = 0;
+		chip->als_cur_info.lux = 0;
+		goto done;
+	}
+
+	/* calculate ratio */
+	ratio = (ch1 << 15) / ch0;
+
+	/* convert to unscaled lux using the pointer to the table */
+	for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
+	     p->ratio != 0 && p->ratio < ratio; p++)
+		;
+
+	if (p->ratio == 0) {
+		lux = 0;
+	} else {
+		u32 ch0lux, ch1lux;
+
+		ch0lux = ((ch0 * p->ch0) +
+			  (gainadj[chip->als_settings.als_gain].ch0 >> 1))
+			 / gainadj[chip->als_settings.als_gain].ch0;
+		ch1lux = ((ch1 * p->ch1) +
+			  (gainadj[chip->als_settings.als_gain].ch1 >> 1))
+			 / gainadj[chip->als_settings.als_gain].ch1;
+
+		/* note: lux is 31 bit max at this point */
+		if (ch1lux > ch0lux) {
+			dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
+				__func__);
+			ret = 0;
+			chip->als_cur_info.lux = 0;
+			goto done;
+		}
+
+		lux = ch0lux - ch1lux;
+	}
+
+	/* adjust for active time scale */
+	if (chip->als_time_scale == 0)
+		lux = 0;
+	else
+		lux = (lux + (chip->als_time_scale >> 1)) /
+			chip->als_time_scale;
+
+	/*
+	 * Adjust for active gain scale.
+	 * The tsl2583_default_lux tables above have a factor of 8192 built in,
+	 * so we need to shift right.
+	 * User-specified gain provides a multiplier.
+	 * Apply user-specified gain before shifting right to retain precision.
+	 * Use 64 bits to avoid overflow on multiplication.
+	 * Then go back to 32 bits before division to avoid using div_u64().
+	 */
+	lux64 = lux;
+	lux64 = lux64 * chip->als_settings.als_gain_trim;
+	lux64 >>= 13;
+	lux = lux64;
+	lux = DIV_ROUND_CLOSEST(lux, 1000);
+
+	if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
+return_max:
+		lux = TSL2583_LUX_CALC_OVER_FLOW;
+	}
+
+	/* Update the structure with the latest VALID lux. */
+	chip->als_cur_info.lux = lux;
+	ret = lux;
+
+done:
+	return ret;
+}
+
+/*
+ * Obtain single reading and calculate the als_gain_trim (later used
+ * to derive actual lux).
+ * Return updated gain_trim value.
+ */
+static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	unsigned int gain_trim_val;
+	int ret;
+	int lux_val;
+
+	ret = i2c_smbus_read_byte_data(chip->client,
+				       TSL2583_CMD_REG | TSL2583_CNTRL);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to read from the CNTRL register\n",
+			__func__);
+		return ret;
+	}
+
+	if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
+			!= (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
+		dev_err(&chip->client->dev,
+			"%s: Device is not powered on and/or ADC is not enabled\n",
+			__func__);
+		return -EINVAL;
+	} else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
+		dev_err(&chip->client->dev,
+			"%s: The two ADC channels have not completed an integration cycle\n",
+			__func__);
+		return -ENODATA;
+	}
+
+	lux_val = tsl2583_get_lux(indio_dev);
+	if (lux_val < 0) {
+		dev_err(&chip->client->dev, "%s: failed to get lux\n",
+			__func__);
+		return lux_val;
+	}
+
+	/* Avoid division by zero of lux_value later on */
+	if (lux_val == 0) {
+		dev_err(&chip->client->dev,
+			"%s: lux_val of 0 will produce out of range trim_value\n",
+			__func__);
+		return -ENODATA;
+	}
+
+	gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
+			* chip->als_settings.als_gain_trim) / lux_val);
+	if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
+		dev_err(&chip->client->dev,
+			"%s: trim_val of %d is not within the range [250, 4000]\n",
+			__func__, gain_trim_val);
+		return -ENODATA;
+	}
+
+	chip->als_settings.als_gain_trim = (int)gain_trim_val;
+
+	return 0;
+}
+
+static int tsl2583_set_als_time(struct tsl2583_chip *chip)
+{
+	int als_count, als_time, ret;
+	u8 val;
+
+	/* determine als integration register */
+	als_count = DIV_ROUND_CLOSEST(chip->als_settings.als_time * 100, 270);
+	if (!als_count)
+		als_count = 1; /* ensure at least one cycle */
+
+	/* convert back to time (encompasses overrides) */
+	als_time = DIV_ROUND_CLOSEST(als_count * 27, 10);
+
+	val = 256 - als_count;
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_ALS_TIME,
+					val);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
+			__func__, val);
+		return ret;
+	}
+
+	/* set chip struct re scaling and saturation */
+	chip->als_saturation = als_count * 922; /* 90% of full scale */
+	chip->als_time_scale = DIV_ROUND_CLOSEST(als_time, 50);
+
+	return ret;
+}
+
+static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
+{
+	int ret;
+
+	/* Set the gain based on als_settings struct */
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_GAIN,
+					chip->als_settings.als_gain);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: failed to set the gain to %d\n", __func__,
+			chip->als_settings.als_gain);
+
+	return ret;
+}
+
+static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_CNTRL, state);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: failed to set the power state to %d\n", __func__,
+			state);
+
+	return ret;
+}
+
+/*
+ * Turn the device on.
+ * Configuration must be set before calling this function.
+ */
+static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	/* Power on the device; ADC off. */
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_INTERRUPT,
+					TSL2583_INTERRUPT_DISABLED);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to disable interrupts\n", __func__);
+		return ret;
+	}
+
+	ret = tsl2583_set_als_time(chip);
+	if (ret < 0)
+		return ret;
+
+	ret = tsl2583_set_als_gain(chip);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 3500);
+
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
+					    TSL2583_CNTL_ADC_ENBL);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+/* Sysfs Interface Functions */
+
+static ssize_t in_illuminance_input_target_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+	ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static ssize_t in_illuminance_input_target_store(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int value;
+
+	if (kstrtoint(buf, 0, &value) || !value)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+	chip->als_settings.als_cal_target = value;
+	mutex_unlock(&chip->als_mutex);
+
+	return len;
+}
+
+static ssize_t in_illuminance_calibrate_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int value, ret;
+
+	if (kstrtoint(buf, 0, &value) || value != 1)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = tsl2583_als_calibrate(indio_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = len;
+done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static ssize_t in_illuminance_lux_table_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	unsigned int i;
+	int offset = 0;
+
+	for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
+		offset += sprintf(buf + offset, "%u,%u,%u,",
+				  chip->als_settings.als_device_lux[i].ratio,
+				  chip->als_settings.als_device_lux[i].ch0,
+				  chip->als_settings.als_device_lux[i].ch1);
+		if (chip->als_settings.als_device_lux[i].ratio == 0) {
+			/*
+			 * We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break.
+			 */
+			offset--;
+			break;
+		}
+	}
+
+	offset += sprintf(buf + offset, "\n");
+
+	return offset;
+}
+
+static ssize_t in_illuminance_lux_table_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
+	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1];
+	int ret = -EINVAL;
+	unsigned int n;
+
+	mutex_lock(&chip->als_mutex);
+
+	get_options(buf, ARRAY_SIZE(value), value);
+
+	/*
+	 * We now have an array of ints starting at value[1], and
+	 * enumerated by value[0].
+	 * We expect each group of three ints is one table entry,
+	 * and the last table entry is all 0.
+	 */
+	n = value[0];
+	if ((n % 3) || n < 6 || n > max_ints) {
+		dev_err(dev,
+			"%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n",
+			__func__, max_ints);
+		goto done;
+	}
+	if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
+		dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
+			__func__);
+		goto done;
+	}
+
+	memcpy(chip->als_settings.als_device_lux, &value[1],
+	       value[0] * sizeof(value[1]));
+
+	ret = len;
+
+done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111");
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+		      "0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 0.500 0.550 0.600 0.650");
+static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0);
+static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0);
+static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0);
+
+static struct attribute *sysfs_attrs_ctrl[] = {
+	&iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
+	&iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_input_target.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_calibrate.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_lux_table.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2583_attribute_group = {
+	.attrs = sysfs_attrs_ctrl,
+};
+
+static const struct iio_chan_spec tsl2583_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_LIGHT,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_CALIBBIAS) |
+				      BIT(IIO_CHAN_INFO_CALIBSCALE) |
+				      BIT(IIO_CHAN_INFO_INT_TIME),
+	},
+};
+
+static int tsl2583_set_pm_runtime_busy(struct tsl2583_chip *chip, bool on)
+{
+	int ret;
+
+	if (on) {
+		ret = pm_runtime_resume_and_get(&chip->client->dev);
+	} else {
+		pm_runtime_mark_last_busy(&chip->client->dev);
+		ret = pm_runtime_put_autosuspend(&chip->client->dev);
+	}
+
+	return ret;
+}
+
+static int tsl2583_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret, pm_ret;
+
+	ret = tsl2583_set_pm_runtime_busy(chip, true);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_LIGHT) {
+			ret = tsl2583_get_lux(indio_dev);
+			if (ret < 0)
+				goto read_done;
+
+			/*
+			 * From page 20 of the TSL2581, TSL2583 data
+			 * sheet (TAOS134 − MARCH 2011):
+			 *
+			 * One of the photodiodes (channel 0) is
+			 * sensitive to both visible and infrared light,
+			 * while the second photodiode (channel 1) is
+			 * sensitive primarily to infrared light.
+			 */
+			if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+				*val = chip->als_cur_info.als_ch0;
+			else
+				*val = chip->als_cur_info.als_ch1;
+
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type == IIO_LIGHT) {
+			ret = tsl2583_get_lux(indio_dev);
+			if (ret < 0)
+				goto read_done;
+
+			*val = ret;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type == IIO_LIGHT) {
+			*val = chip->als_settings.als_gain_trim;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT) {
+			*val = gainadj[chip->als_settings.als_gain].mean;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (chan->type == IIO_LIGHT) {
+			*val = 0;
+			*val2 = chip->als_settings.als_time;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+		}
+		break;
+	default:
+		break;
+	}
+
+read_done:
+	mutex_unlock(&chip->als_mutex);
+
+	if (ret < 0) {
+		tsl2583_set_pm_runtime_busy(chip, false);
+		return ret;
+	}
+
+	/*
+	 * Preserve the ret variable if the call to
+	 * tsl2583_set_pm_runtime_busy() is successful so the reading
+	 * (if applicable) is returned to user space.
+	 */
+	pm_ret = tsl2583_set_pm_runtime_busy(chip, false);
+	if (pm_ret < 0)
+		return pm_ret;
+
+	return ret;
+}
+
+static int tsl2583_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	ret = tsl2583_set_pm_runtime_busy(chip, true);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type == IIO_LIGHT) {
+			chip->als_settings.als_gain_trim = val;
+			ret = 0;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT) {
+			unsigned int i;
+
+			for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
+				if (gainadj[i].mean == val) {
+					chip->als_settings.als_gain = i;
+					ret = tsl2583_set_als_gain(chip);
+					break;
+				}
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
+		    val2 <= 650 && !(val2 % 50)) {
+			chip->als_settings.als_time = val2;
+			ret = tsl2583_set_als_time(chip);
+		}
+		break;
+	default:
+		break;
+	}
+
+	mutex_unlock(&chip->als_mutex);
+
+	if (ret < 0) {
+		tsl2583_set_pm_runtime_busy(chip, false);
+		return ret;
+	}
+
+	ret = tsl2583_set_pm_runtime_busy(chip, false);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static const struct iio_info tsl2583_info = {
+	.attrs = &tsl2583_attribute_group,
+	.read_raw = tsl2583_read_raw,
+	.write_raw = tsl2583_write_raw,
+};
+
+static int tsl2583_probe(struct i2c_client *clientp)
+{
+	int ret;
+	struct tsl2583_chip *chip;
+	struct iio_dev *indio_dev;
+
+	if (!i2c_check_functionality(clientp->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = clientp;
+	i2c_set_clientdata(clientp, indio_dev);
+
+	mutex_init(&chip->als_mutex);
+
+	ret = i2c_smbus_read_byte_data(clientp,
+				       TSL2583_CMD_REG | TSL2583_CHIPID);
+	if (ret < 0) {
+		dev_err(&clientp->dev,
+			"%s: failed to read the chip ID register\n", __func__);
+		return ret;
+	}
+
+	if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
+		dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
+			__func__, ret);
+		return -EINVAL;
+	}
+
+	indio_dev->info = &tsl2583_info;
+	indio_dev->channels = tsl2583_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+
+	pm_runtime_enable(&clientp->dev);
+	pm_runtime_set_autosuspend_delay(&clientp->dev,
+					 TSL2583_POWER_OFF_DELAY_MS);
+	pm_runtime_use_autosuspend(&clientp->dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&clientp->dev, "%s: iio registration failed\n",
+			__func__);
+		return ret;
+	}
+
+	/* Load up the V2 defaults (these are hard coded defaults for now) */
+	tsl2583_defaults(chip);
+
+	dev_info(&clientp->dev, "Light sensor found.\n");
+
+	return 0;
+}
+
+static void tsl2583_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
+}
+
+static int tsl2583_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
+
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static int tsl2583_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = tsl2583_chip_init_and_power_on(indio_dev);
+
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend,
+				 tsl2583_resume, NULL);
+
+static const struct i2c_device_id tsl2583_idtable[] = {
+	{ "tsl2580", 0 },
+	{ "tsl2581", 1 },
+	{ "tsl2583", 2 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
+
+static const struct of_device_id tsl2583_of_match[] = {
+	{ .compatible = "amstaos,tsl2580", },
+	{ .compatible = "amstaos,tsl2581", },
+	{ .compatible = "amstaos,tsl2583", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tsl2583_of_match);
+
+/* Driver definition */
+static struct i2c_driver tsl2583_driver = {
+	.driver = {
+		.name = "tsl2583",
+		.pm = pm_ptr(&tsl2583_pm_ops),
+		.of_match_table = tsl2583_of_match,
+	},
+	.id_table = tsl2583_idtable,
+	.probe = tsl2583_probe,
+	.remove = tsl2583_remove,
+};
+module_i2c_driver(tsl2583_driver);
+
+MODULE_AUTHOR("J. August Brenner <jbrenner@taosinc.com>");
+MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
+MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
+MODULE_LICENSE("GPL");