Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 52 insertions, 8 deletions

diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 967de99c1..a444d4b29 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -4,6 +4,7 @@
  *
  * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
  */
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/err.h>
@@ -14,8 +15,7 @@
 static int bmp280_regmap_spi_write(void *context, const void *data,
                                    size_t count)
 {
-	struct device *dev = context;
-	struct spi_device *spi = to_spi_device(dev);
+	struct spi_device *spi = to_spi_device(context);
 	u8 buf[2];
 
 	memcpy(buf, data, 2);
@@ -31,12 +31,39 @@ static int bmp280_regmap_spi_write(void *context, const void *data,
 static int bmp280_regmap_spi_read(void *context, const void *reg,
                                   size_t reg_size, void *val, size_t val_size)
 {
-	struct device *dev = context;
-	struct spi_device *spi = to_spi_device(dev);
+	struct spi_device *spi = to_spi_device(context);
 
 	return spi_write_then_read(spi, reg, reg_size, val, val_size);
 }
 
+static int bmp380_regmap_spi_read(void *context, const void *reg,
+				  size_t reg_size, void *val, size_t val_size)
+{
+	struct spi_device *spi = to_spi_device(context);
+	u8 rx_buf[4];
+	ssize_t status;
+
+	/*
+	 * Maximum number of consecutive bytes read for a temperature or
+	 * pressure measurement is 3.
+	 */
+	if (val_size > 3)
+		return -EINVAL;
+
+	/*
+	 * According to the BMP3xx datasheets, for a basic SPI read opertion,
+	 * the first byte needs to be dropped and the rest are the requested
+	 * data.
+	 */
+	status = spi_write_then_read(spi, reg, 1, rx_buf, val_size + 1);
+	if (status)
+		return status;
+
+	memcpy(val, rx_buf + 1, val_size);
+
+	return 0;
+}
+
 static struct regmap_bus bmp280_regmap_bus = {
 	.write = bmp280_regmap_spi_write,
 	.read = bmp280_regmap_spi_read,
@@ -44,10 +71,19 @@ static struct regmap_bus bmp280_regmap_bus = {
 	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
+static struct regmap_bus bmp380_regmap_bus = {
+	.write = bmp280_regmap_spi_write,
+	.read = bmp380_regmap_spi_read,
+	.read_flag_mask = BIT(7),
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
 static int bmp280_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	const struct bmp280_chip_info *chip_info;
+	struct regmap_bus *bmp_regmap_bus;
 	struct regmap *regmap;
 	int ret;
 
@@ -58,12 +94,20 @@ static int bmp280_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	chip_info = device_get_match_data(&spi->dev);
-	if (!chip_info)
-		chip_info = (const struct bmp280_chip_info *) id->driver_data;
+	chip_info = spi_get_device_match_data(spi);
+
+	switch (chip_info->chip_id[0]) {
+	case BMP380_CHIP_ID:
+	case BMP390_CHIP_ID:
+		bmp_regmap_bus = &bmp380_regmap_bus;
+		break;
+	default:
+		bmp_regmap_bus = &bmp280_regmap_bus;
+		break;
+	}
 
 	regmap = devm_regmap_init(&spi->dev,
-				  &bmp280_regmap_bus,
+				  bmp_regmap_bus,
 				  &spi->dev,
 				  chip_info->regmap_config);
 	if (IS_ERR(regmap)) {