Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 551 insertions, 178 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 79adfd059c..3ad3850602 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -114,6 +114,8 @@ config HSC030PA
 	depends on (I2C || SPI_MASTER)
 	select HSC030PA_I2C if I2C
 	select HSC030PA_SPI if SPI_MASTER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Honeywell TruStability
 	  HSC and SSC pressure and temperature sensor series.
@@ -181,7 +183,9 @@ config MPL3115
 
 config MPRLS0025PA
 	tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)"
-	depends on I2C
+	depends on (I2C || SPI_MASTER)
+	select MPRLS0025PA_I2C if I2C
+	select MPRLS0025PA_SPI if SPI_MASTER
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -192,6 +196,16 @@ config MPRLS0025PA
 	  To compile this driver as a module, choose M here: the module will be
 	  called mprls0025pa.
 
+config MPRLS0025PA_I2C
+	tristate
+	depends on MPRLS0025PA
+	depends on I2C
+
+config MPRLS0025PA_SPI
+	tristate
+	depends on MPRLS0025PA
+	depends on SPI_MASTER
+
 config MS5611
 	tristate "Measurement Specialties MS5611 pressure sensor driver"
 	select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index b0f8b94662..a93709e357 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -24,6 +24,8 @@ obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
 obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
 obj-$(CONFIG_MPL3115) += mpl3115.o
 obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o
+obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o
+obj-$(CONFIG_MPRLS0025PA_SPI) += mprls0025pa_spi.o
 obj-$(CONFIG_MS5611) += ms5611_core.o
 obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
 obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 62e9e93d91..0199d055e0 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1394,12 +1394,12 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
 
 	/*
 	 * Temperature is returned in Celsius degrees in fractional
-	 * form down 2^16. We rescale by x1000 to return milli Celsius
-	 * to respect IIO ABI.
+	 * form down 2^16. We rescale by x1000 to return millidegrees
+	 * Celsius to respect IIO ABI.
 	 */
-	*val = raw_temp * 1000;
-	*val2 = 16;
-	return IIO_VAL_FRACTIONAL_LOG2;
+	raw_temp = sign_extend32(raw_temp, 23);
+	*val = ((s64)raw_temp * 1000) / (1 << 16);
+	return IIO_VAL_INT;
 }
 
 static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 1ff091b2f7..d0a516d56d 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -730,7 +730,7 @@ static int dps310_read_pressure(struct dps310_data *data, int *val, int *val2,
 	}
 }
 
-static int dps310_calculate_temp(struct dps310_data *data)
+static int dps310_calculate_temp(struct dps310_data *data, int *val)
 {
 	s64 c0;
 	s64 t;
@@ -746,7 +746,9 @@ static int dps310_calculate_temp(struct dps310_data *data)
 	t = c0 + ((s64)data->temp_raw * (s64)data->c1);
 
 	/* Convert to milliCelsius and scale the temperature */
-	return (int)div_s64(t * 1000LL, kt);
+	*val = (int)div_s64(t * 1000LL, kt);
+
+	return 0;
 }
 
 static int dps310_read_temp(struct dps310_data *data, int *val, int *val2,
@@ -768,11 +770,10 @@ static int dps310_read_temp(struct dps310_data *data, int *val, int *val2,
 		if (rc)
 			return rc;
 
-		rc = dps310_calculate_temp(data);
-		if (rc < 0)
+		rc = dps310_calculate_temp(data, val);
+		if (rc)
 			return rc;
 
-		*val = rc;
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
index a072de6cb5..261af15628 100644
--- a/drivers/iio/pressure/hp206c.c
+++ b/drivers/iio/pressure/hp206c.c
@@ -11,12 +11,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/delay.h>
 #include <linux/util_macros.h>
-#include <linux/acpi.h>
 
 #include <asm/unaligned.h>
 
@@ -400,20 +400,18 @@ static const struct i2c_device_id hp206c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, hp206c_id);
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id hp206c_acpi_match[] = {
 	{"HOP206C", 0},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
-#endif
 
 static struct i2c_driver hp206c_driver = {
 	.probe = hp206c_probe,
 	.id_table = hp206c_id,
 	.driver = {
 		.name = "hp206c",
-		.acpi_match_table = ACPI_PTR(hp206c_acpi_match),
+		.acpi_match_table = hp206c_acpi_match,
 	},
 };
 
diff --git a/drivers/iio/pressure/hsc030pa.c b/drivers/iio/pressure/hsc030pa.c
index d6a51f0c33..1682b90d45 100644
--- a/drivers/iio/pressure/hsc030pa.c
+++ b/drivers/iio/pressure/hsc030pa.c
@@ -22,8 +22,11 @@
 #include <linux/types.h>
 #include <linux/units.h>
 
+#include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
 
 #include <asm/unaligned.h>
 
@@ -297,6 +300,29 @@ static int hsc_get_measurement(struct hsc_data *data)
 	return 0;
 }
 
+static irqreturn_t hsc_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct hsc_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = hsc_get_measurement(data);
+	if (ret)
+		goto error;
+
+	memcpy(&data->scan.chan[0], &data->buffer[0], 2);
+	memcpy(&data->scan.chan[1], &data->buffer[2], 2);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+					   iio_get_time_ns(indio_dev));
+
+error:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
 /*
  * IIO ABI expects
  * value = (conv + offset) * scale
@@ -382,13 +408,29 @@ static const struct iio_chan_spec hsc_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				      BIT(IIO_CHAN_INFO_SCALE) |
 				      BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 14,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
 	},
 	{
 		.type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				      BIT(IIO_CHAN_INFO_SCALE) |
 				      BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 11,
+			.storagebits = 16,
+			.shift = 5,
+			.endianness = IIO_BE,
+		},
 	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
 };
 
 static const struct iio_info hsc_info = {
@@ -406,7 +448,7 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv)
 	struct hsc_data *hsc;
 	struct iio_dev *indio_dev;
 	const char *triplet;
-	u64 tmp;
+	s64 tmp;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*hsc));
@@ -485,6 +527,11 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv)
 	indio_dev->channels = hsc->chip->channels;
 	indio_dev->num_channels = hsc->chip->num_channels;
 
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      hsc_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
 	return devm_iio_device_register(dev, indio_dev);
 }
 EXPORT_SYMBOL_NS(hsc_common_probe, IIO_HONEYWELL_HSC030PA);
diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h
index d20420dba4..9b40f46f57 100644
--- a/drivers/iio/pressure/hsc030pa.h
+++ b/drivers/iio/pressure/hsc030pa.h
@@ -10,7 +10,10 @@
 
 #include <linux/types.h>
 
+#include <linux/iio/iio.h>
+
 #define HSC_REG_MEASUREMENT_RD_SIZE 4
+#define HSC_RESP_TIME_MS            2
 
 struct device;
 
@@ -53,6 +56,10 @@ struct hsc_data {
 	s32 p_scale_dec;
 	s64 p_offset;
 	s32 p_offset_dec;
+	struct {
+		__be16 chan[2];
+		s64 timestamp __aligned(8);
+	} scan;
 	u8 buffer[HSC_REG_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN);
 };
 
diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c
index e2b524b364..b3fd230e71 100644
--- a/drivers/iio/pressure/hsc030pa_i2c.c
+++ b/drivers/iio/pressure/hsc030pa_i2c.c
@@ -4,14 +4,17 @@
  *
  * Copyright (c) 2023 Petre Rodan <petre.rodan@subdimension.ro>
  *
- * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [hsc]
- * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf [i2c related]
+ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf
+ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf
  */
 
+#include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/types.h>
 
 #include <linux/iio/iio.h>
 
@@ -23,6 +26,8 @@ static int hsc_i2c_recv(struct hsc_data *data)
 	struct i2c_msg msg;
 	int ret;
 
+	msleep_interruptible(HSC_RESP_TIME_MS);
+
 	msg.addr = client->addr;
 	msg.flags = client->flags | I2C_M_RD;
 	msg.len = HSC_REG_MEASUREMENT_RD_SIZE;
diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c
index a719bade83..818fa63034 100644
--- a/drivers/iio/pressure/hsc030pa_spi.c
+++ b/drivers/iio/pressure/hsc030pa_spi.c
@@ -4,13 +4,17 @@
  *
  * Copyright (c) 2023 Petre Rodan <petre.rodan@subdimension.ro>
  *
- * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-spi-comms-digital-ouptu-pressure-sensors-tn-008202-3-en-ciid-45843.pdf
+ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf
  */
 
+#include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/stddef.h>
+#include <linux/types.h>
 
 #include <linux/iio/iio.h>
 
@@ -25,6 +29,7 @@ static int hsc_spi_recv(struct hsc_data *data)
 		.len = HSC_REG_MEASUREMENT_RD_SIZE,
 	};
 
+	msleep_interruptible(HSC_RESP_TIME_MS);
 	return spi_sync_transfer(spi, &xfer, 1);
 }
 
diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c
index e3f0de020a..33a15d4c64 100644
--- a/drivers/iio/pressure/mprls0025pa.c
+++ b/drivers/iio/pressure/mprls0025pa.c
@@ -5,17 +5,13 @@
  * Copyright (c) Andreas Klinger <ak@it-klinger.de>
  *
  * Data sheet:
- *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
- *    products/sensors/pressure-sensors/board-mount-pressure-sensors/
- *    micropressure-mpr-series/documents/
- *    sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
  *
- * 7-bit I2C default slave address: 0x18
  */
 
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/math64.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
@@ -25,7 +21,6 @@
 #include <linux/gpio/consumer.h>
 
 #include <linux/iio/buffer.h>
-#include <linux/iio/iio.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 
@@ -33,11 +28,15 @@
 
 #include <asm/unaligned.h>
 
-/* bits in i2c status byte */
-#define MPR_I2C_POWER	BIT(6)	/* device is powered */
-#define MPR_I2C_BUSY	BIT(5)	/* device is busy */
-#define MPR_I2C_MEMORY	BIT(2)	/* integrity test passed */
-#define MPR_I2C_MATH	BIT(0)	/* internal math saturation */
+#include "mprls0025pa.h"
+
+/* bits in status byte */
+#define MPR_ST_POWER  BIT(6) /* device is powered */
+#define MPR_ST_BUSY   BIT(5) /* device is busy */
+#define MPR_ST_MEMORY BIT(2) /* integrity test passed */
+#define MPR_ST_MATH   BIT(0) /* internal math saturation */
+
+#define MPR_ST_ERR_FLAG  (MPR_ST_BUSY | MPR_ST_MEMORY | MPR_ST_MATH)
 
 /*
  * support _RAW sysfs interface:
@@ -70,60 +69,87 @@
  * transfer function B:  2.5% to 22.5% of 2^24
  * transfer function C: 20%   to 80%   of 2^24
  */
-enum mpr_func_id {
-	MPR_FUNCTION_A,
-	MPR_FUNCTION_B,
-	MPR_FUNCTION_C,
-};
-
 struct mpr_func_spec {
 	u32			output_min;
 	u32			output_max;
 };
 
 static const struct mpr_func_spec mpr_func_spec[] = {
-	[MPR_FUNCTION_A] = {.output_min = 1677722, .output_max = 15099494},
-	[MPR_FUNCTION_B] = {.output_min =  419430, .output_max =  3774874},
-	[MPR_FUNCTION_C] = {.output_min = 3355443, .output_max = 13421773},
+	[MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 },
+	[MPR_FUNCTION_B] = { .output_min =  419430, .output_max =  3774874 },
+	[MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 },
 };
 
-struct mpr_chan {
-	s32			pres;		/* pressure value */
-	s64			ts;		/* timestamp */
+enum mpr_variants {
+	MPR0001BA = 0x00, MPR01_6BA = 0x01, MPR02_5BA = 0x02, MPR0060MG = 0x03,
+	MPR0100MG = 0x04, MPR0160MG = 0x05, MPR0250MG = 0x06, MPR0400MG = 0x07,
+	MPR0600MG = 0x08, MPR0001BG = 0x09, MPR01_6BG = 0x0a, MPR02_5BG = 0x0b,
+	MPR0100KA = 0x0c, MPR0160KA = 0x0d, MPR0250KA = 0x0e, MPR0006KG = 0x0f,
+	MPR0010KG = 0x10, MPR0016KG = 0x11, MPR0025KG = 0x12, MPR0040KG = 0x13,
+	MPR0060KG = 0x14, MPR0100KG = 0x15, MPR0160KG = 0x16, MPR0250KG = 0x17,
+	MPR0015PA = 0x18, MPR0025PA = 0x19, MPR0030PA = 0x1a, MPR0001PG = 0x1b,
+	MPR0005PG = 0x1c, MPR0015PG = 0x1d, MPR0030PG = 0x1e, MPR0300YG = 0x1f,
+	MPR_VARIANTS_MAX
+};
+
+static const char * const mpr_triplet_variants[MPR_VARIANTS_MAX] = {
+	[MPR0001BA] = "0001BA", [MPR01_6BA] = "01.6BA", [MPR02_5BA] = "02.5BA",
+	[MPR0060MG] = "0060MG", [MPR0100MG] = "0100MG", [MPR0160MG] = "0160MG",
+	[MPR0250MG] = "0250MG", [MPR0400MG] = "0400MG", [MPR0600MG] = "0600MG",
+	[MPR0001BG] = "0001BG", [MPR01_6BG] = "01.6BG", [MPR02_5BG] = "02.5BG",
+	[MPR0100KA] = "0100KA", [MPR0160KA] = "0160KA", [MPR0250KA] = "0250KA",
+	[MPR0006KG] = "0006KG", [MPR0010KG] = "0010KG", [MPR0016KG] = "0016KG",
+	[MPR0025KG] = "0025KG", [MPR0040KG] = "0040KG", [MPR0060KG] = "0060KG",
+	[MPR0100KG] = "0100KG", [MPR0160KG] = "0160KG", [MPR0250KG] = "0250KG",
+	[MPR0015PA] = "0015PA", [MPR0025PA] = "0025PA", [MPR0030PA] = "0030PA",
+	[MPR0001PG] = "0001PG", [MPR0005PG] = "0005PG", [MPR0015PG] = "0015PG",
+	[MPR0030PG] = "0030PG", [MPR0300YG] = "0300YG"
+};
+
+/**
+ * struct mpr_range_config - list of pressure ranges based on nomenclature
+ * @pmin: lowest pressure that can be measured
+ * @pmax: highest pressure that can be measured
+ */
+struct mpr_range_config {
+	const s32 pmin;
+	const s32 pmax;
 };
 
-struct mpr_data {
-	struct i2c_client	*client;
-	struct mutex		lock;		/*
-						 * access to device during read
-						 */
-	u32			pmin;		/* minimal pressure in pascal */
-	u32			pmax;		/* maximal pressure in pascal */
-	enum mpr_func_id	function;	/* transfer function */
-	u32			outmin;		/*
-						 * minimal numerical range raw
-						 * value from sensor
-						 */
-	u32			outmax;		/*
-						 * maximal numerical range raw
-						 * value from sensor
-						 */
-	int                     scale;          /* int part of scale */
-	int                     scale2;         /* nano part of scale */
-	int                     offset;         /* int part of offset */
-	int                     offset2;        /* nano part of offset */
-	struct gpio_desc	*gpiod_reset;	/* reset */
-	int			irq;		/*
-						 * end of conversion irq;
-						 * used to distinguish between
-						 * irq mode and reading in a
-						 * loop until data is ready
-						 */
-	struct completion	completion;	/* handshake from irq to read */
-	struct mpr_chan		chan;		/*
-						 * channel values for buffered
-						 * mode
-						 */
+/* All min max limits have been converted to pascals */
+static const struct mpr_range_config mpr_range_config[MPR_VARIANTS_MAX] = {
+	[MPR0001BA] = { .pmin = 0, .pmax = 100000 },
+	[MPR01_6BA] = { .pmin = 0, .pmax = 160000 },
+	[MPR02_5BA] = { .pmin = 0, .pmax = 250000 },
+	[MPR0060MG] = { .pmin = 0, .pmax =   6000 },
+	[MPR0100MG] = { .pmin = 0, .pmax =  10000 },
+	[MPR0160MG] = { .pmin = 0, .pmax =  16000 },
+	[MPR0250MG] = { .pmin = 0, .pmax =  25000 },
+	[MPR0400MG] = { .pmin = 0, .pmax =  40000 },
+	[MPR0600MG] = { .pmin = 0, .pmax =  60000 },
+	[MPR0001BG] = { .pmin = 0, .pmax = 100000 },
+	[MPR01_6BG] = { .pmin = 0, .pmax = 160000 },
+	[MPR02_5BG] = { .pmin = 0, .pmax = 250000 },
+	[MPR0100KA] = { .pmin = 0, .pmax = 100000 },
+	[MPR0160KA] = { .pmin = 0, .pmax = 160000 },
+	[MPR0250KA] = { .pmin = 0, .pmax = 250000 },
+	[MPR0006KG] = { .pmin = 0, .pmax =   6000 },
+	[MPR0010KG] = { .pmin = 0, .pmax =  10000 },
+	[MPR0016KG] = { .pmin = 0, .pmax =  16000 },
+	[MPR0025KG] = { .pmin = 0, .pmax =  25000 },
+	[MPR0040KG] = { .pmin = 0, .pmax =  40000 },
+	[MPR0060KG] = { .pmin = 0, .pmax =  60000 },
+	[MPR0100KG] = { .pmin = 0, .pmax = 100000 },
+	[MPR0160KG] = { .pmin = 0, .pmax = 160000 },
+	[MPR0250KG] = { .pmin = 0, .pmax = 250000 },
+	[MPR0015PA] = { .pmin = 0, .pmax = 103421 },
+	[MPR0025PA] = { .pmin = 0, .pmax = 172369 },
+	[MPR0030PA] = { .pmin = 0, .pmax = 206843 },
+	[MPR0001PG] = { .pmin = 0, .pmax =   6895 },
+	[MPR0005PG] = { .pmin = 0, .pmax =  34474 },
+	[MPR0015PG] = { .pmin = 0, .pmax = 103421 },
+	[MPR0030PG] = { .pmin = 0, .pmax = 206843 },
+	[MPR0300YG] = { .pmin = 0, .pmax =  39997 }
 };
 
 static const struct iio_chan_spec mpr_channels[] = {
@@ -153,11 +179,11 @@ static void mpr_reset(struct mpr_data *data)
 }
 
 /**
- * mpr_read_pressure() - Read pressure value from sensor via I2C
+ * mpr_read_pressure() - Read pressure value from sensor
  * @data: Pointer to private data struct.
  * @press: Output value read from sensor.
  *
- * Reading from the sensor by sending and receiving I2C telegrams.
+ * Reading from the sensor by sending and receiving telegrams.
  *
  * If there is an end of conversion (EOC) interrupt registered the function
  * waits for a maximum of one second for the interrupt.
@@ -170,25 +196,17 @@ static void mpr_reset(struct mpr_data *data)
  */
 static int mpr_read_pressure(struct mpr_data *data, s32 *press)
 {
-	struct device *dev = &data->client->dev;
+	struct device *dev = data->dev;
 	int ret, i;
-	u8 wdata[] = {0xAA, 0x00, 0x00};
-	s32 status;
 	int nloops = 10;
-	u8 buf[4];
 
 	reinit_completion(&data->completion);
 
-	ret = i2c_master_send(data->client, wdata, sizeof(wdata));
+	ret = data->ops->write(data, MPR_CMD_SYNC, MPR_PKT_SYNC_LEN);
 	if (ret < 0) {
 		dev_err(dev, "error while writing ret: %d\n", ret);
 		return ret;
 	}
-	if (ret != sizeof(wdata)) {
-		dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret,
-							(u32)sizeof(wdata));
-		return -EIO;
-	}
 
 	if (data->irq > 0) {
 		ret = wait_for_completion_timeout(&data->completion, HZ);
@@ -206,14 +224,14 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press)
 			 *     quite long
 			 */
 			usleep_range(5000, 10000);
-			status = i2c_smbus_read_byte(data->client);
-			if (status < 0) {
+			ret = data->ops->read(data, MPR_CMD_NOP, 1);
+			if (ret < 0) {
 				dev_err(dev,
 					"error while reading, status: %d\n",
-					status);
-				return status;
+					ret);
+				return ret;
 			}
-			if (!(status & MPR_I2C_BUSY))
+			if (!(data->buffer[0] & MPR_ST_ERR_FLAG))
 				break;
 		}
 		if (i == nloops) {
@@ -222,29 +240,19 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press)
 		}
 	}
 
-	ret = i2c_master_recv(data->client, buf, sizeof(buf));
-	if (ret < 0) {
-		dev_err(dev, "error in i2c_master_recv ret: %d\n", ret);
+	ret = data->ops->read(data, MPR_CMD_NOP, MPR_PKT_NOP_LEN);
+	if (ret < 0)
 		return ret;
-	}
-	if (ret != sizeof(buf)) {
-		dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret,
-							(u32)sizeof(buf));
-		return -EIO;
-	}
 
-	if (buf[0] & MPR_I2C_BUSY) {
-		/*
-		 * it should never be the case that status still indicates
-		 * business
-		 */
-		dev_err(dev, "data still not ready: %08x\n", buf[0]);
+	if (data->buffer[0] & MPR_ST_ERR_FLAG) {
+		dev_err(data->dev,
+			"unexpected status byte %02x\n", data->buffer[0]);
 		return -ETIMEDOUT;
 	}
 
-	*press = get_unaligned_be24(&buf[1]);
+	*press = get_unaligned_be24(&data->buffer[1]);
 
-	dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press);
+	dev_dbg(dev, "received: %*ph cnt: %d\n", ret, data->buffer, *press);
 
 	return 0;
 }
@@ -271,7 +279,7 @@ static irqreturn_t mpr_trigger_handler(int irq, void *p)
 		goto err;
 
 	iio_push_to_buffers_with_timestamp(indio_dev, &data->chan,
-						iio_get_time_ns(indio_dev));
+					   iio_get_time_ns(indio_dev));
 
 err:
 	mutex_unlock(&data->lock);
@@ -316,26 +324,23 @@ static const struct iio_info mpr_info = {
 	.read_raw = &mpr_read_raw,
 };
 
-static int mpr_probe(struct i2c_client *client)
+int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq)
 {
 	int ret;
 	struct mpr_data *data;
 	struct iio_dev *indio_dev;
-	struct device *dev = &client->dev;
+	const char *triplet;
 	s64 scale, offset;
 	u32 func;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE))
-		return dev_err_probe(dev, -EOPNOTSUPP,
-					"I2C functionality not supported\n");
-
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
-		return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n");
+		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
-	data->client = client;
-	data->irq = client->irq;
+	data->dev = dev;
+	data->ops = ops;
+	data->irq = irq;
 
 	mutex_init(&data->lock);
 	init_completion(&data->completion);
@@ -349,104 +354,102 @@ static int mpr_probe(struct i2c_client *client)
 	ret = devm_regulator_get_enable(dev, "vdd");
 	if (ret)
 		return dev_err_probe(dev, ret,
-				"can't get and enable vdd supply\n");
+				     "can't get and enable vdd supply\n");
 
-	if (dev_fwnode(dev)) {
+	ret = data->ops->init(data->dev);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u32(dev,
+				       "honeywell,transfer-function", &func);
+	if (ret)
+		return dev_err_probe(dev, ret,
+			     "honeywell,transfer-function could not be read\n");
+	data->function = func - 1;
+	if (data->function > MPR_FUNCTION_C)
+		return dev_err_probe(dev, -EINVAL,
+				     "honeywell,transfer-function %d invalid\n",
+				     data->function);
+
+	ret = device_property_read_string(dev, "honeywell,pressure-triplet",
+					  &triplet);
+	if (ret) {
 		ret = device_property_read_u32(dev, "honeywell,pmin-pascal",
-								&data->pmin);
+					       &data->pmin);
 		if (ret)
 			return dev_err_probe(dev, ret,
-				"honeywell,pmin-pascal could not be read\n");
+				   "honeywell,pmin-pascal could not be read\n");
+
 		ret = device_property_read_u32(dev, "honeywell,pmax-pascal",
-								&data->pmax);
+					       &data->pmax);
 		if (ret)
 			return dev_err_probe(dev, ret,
-				"honeywell,pmax-pascal could not be read\n");
-		ret = device_property_read_u32(dev,
-				"honeywell,transfer-function", &func);
-		if (ret)
-			return dev_err_probe(dev, ret,
-				"honeywell,transfer-function could not be read\n");
-		data->function = func - 1;
-		if (data->function > MPR_FUNCTION_C)
-			return dev_err_probe(dev, -EINVAL,
-				"honeywell,transfer-function %d invalid\n",
-								data->function);
+				   "honeywell,pmax-pascal could not be read\n");
 	} else {
-		/* when loaded as i2c device we need to use default values */
-		dev_notice(dev, "firmware node not found; using defaults\n");
-		data->pmin = 0;
-		data->pmax = 172369; /* 25 psi */
-		data->function = MPR_FUNCTION_A;
+		ret = device_property_match_property_string(dev,
+						   "honeywell,pressure-triplet",
+						   mpr_triplet_variants,
+						   MPR_VARIANTS_MAX);
+		if (ret < 0)
+			return dev_err_probe(dev, -EINVAL,
+				     "honeywell,pressure-triplet is invalid\n");
+
+		data->pmin = mpr_range_config[ret].pmin;
+		data->pmax = mpr_range_config[ret].pmax;
 	}
 
+	if (data->pmin >= data->pmax)
+		return dev_err_probe(dev, -EINVAL,
+				     "pressure limits are invalid\n");
+
 	data->outmin = mpr_func_spec[data->function].output_min;
 	data->outmax = mpr_func_spec[data->function].output_max;
 
 	/* use 64 bit calculation for preserving a reasonable precision */
 	scale = div_s64(((s64)(data->pmax - data->pmin)) * NANO,
-						data->outmax - data->outmin);
+			data->outmax - data->outmin);
 	data->scale = div_s64_rem(scale, NANO, &data->scale2);
 	/*
 	 * multiply with NANO before dividing by scale and later divide by NANO
 	 * again.
 	 */
 	offset = ((-1LL) * (s64)data->outmin) * NANO -
-			div_s64(div_s64((s64)data->pmin * NANO, scale), NANO);
+		  div_s64(div_s64((s64)data->pmin * NANO, scale), NANO);
 	data->offset = div_s64_rem(offset, NANO, &data->offset2);
 
 	if (data->irq > 0) {
 		ret = devm_request_irq(dev, data->irq, mpr_eoc_handler,
-				IRQF_TRIGGER_RISING, client->name, data);
+				       IRQF_TRIGGER_RISING,
+				       dev_name(dev),
+				       data);
 		if (ret)
 			return dev_err_probe(dev, ret,
-				"request irq %d failed\n", data->irq);
+					  "request irq %d failed\n", data->irq);
 	}
 
 	data->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
-							GPIOD_OUT_HIGH);
+						    GPIOD_OUT_HIGH);
 	if (IS_ERR(data->gpiod_reset))
 		return dev_err_probe(dev, PTR_ERR(data->gpiod_reset),
-						"request reset-gpio failed\n");
+				     "request reset-gpio failed\n");
 
 	mpr_reset(data);
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-						mpr_trigger_handler, NULL);
+					      mpr_trigger_handler, NULL);
 	if (ret)
 		return dev_err_probe(dev, ret,
-					"iio triggered buffer setup failed\n");
+				     "iio triggered buffer setup failed\n");
 
 	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
 		return dev_err_probe(dev, ret,
-					"unable to register iio device\n");
+				     "unable to register iio device\n");
 
 	return 0;
 }
-
-static const struct of_device_id mpr_matches[] = {
-	{ .compatible = "honeywell,mprls0025pa" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, mpr_matches);
-
-static const struct i2c_device_id mpr_id[] = {
-	{ "mprls0025pa" },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mpr_id);
-
-static struct i2c_driver mpr_driver = {
-	.probe		= mpr_probe,
-	.id_table	= mpr_id,
-	.driver		= {
-		.name		= "mprls0025pa",
-		.of_match_table = mpr_matches,
-	},
-};
-module_i2c_driver(mpr_driver);
+EXPORT_SYMBOL_NS(mpr_common_probe, IIO_HONEYWELL_MPRLS0025PA);
 
 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
-MODULE_DESCRIPTION("Honeywell MPRLS0025PA I2C driver");
+MODULE_DESCRIPTION("Honeywell MPR pressure sensor core driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/mprls0025pa.h b/drivers/iio/pressure/mprls0025pa.h
new file mode 100644
index 0000000000..9d5c30afa9
--- /dev/null
+++ b/drivers/iio/pressure/mprls0025pa.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver
+ *
+ * Copyright (c) Andreas Klinger <ak@it-klinger.de>
+ *
+ * Data sheet:
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ */
+
+#ifndef _MPRLS0025PA_H
+#define _MPRLS0025PA_H
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+
+#define MPR_MEASUREMENT_RD_SIZE 4
+#define MPR_CMD_NOP      0xf0
+#define MPR_CMD_SYNC     0xaa
+#define MPR_PKT_NOP_LEN  MPR_MEASUREMENT_RD_SIZE
+#define MPR_PKT_SYNC_LEN 3
+
+struct device;
+
+struct iio_chan_spec;
+struct iio_dev;
+
+struct mpr_data;
+struct mpr_ops;
+
+/**
+ * struct mpr_chan
+ * @pres: pressure value
+ * @ts: timestamp
+ */
+struct mpr_chan {
+	s32 pres;
+	s64 ts;
+};
+
+enum mpr_func_id {
+	MPR_FUNCTION_A,
+	MPR_FUNCTION_B,
+	MPR_FUNCTION_C,
+};
+
+/**
+ * struct mpr_data
+ * @dev: current device structure
+ * @ops: functions that implement the sensor reads/writes, bus init
+ * @lock: access to device during read
+ * @pmin: minimal pressure in pascal
+ * @pmax: maximal pressure in pascal
+ * @function: transfer function
+ * @outmin: minimum raw pressure in counts (based on transfer function)
+ * @outmax: maximum raw pressure in counts (based on transfer function)
+ * @scale: pressure scale
+ * @scale2: pressure scale, decimal number
+ * @offset: pressure offset
+ * @offset2: pressure offset, decimal number
+ * @gpiod_reset: reset
+ * @irq: end of conversion irq. used to distinguish between irq mode and
+ *       reading in a loop until data is ready
+ * @completion: handshake from irq to read
+ * @chan: channel values for buffered mode
+ * @buffer: raw conversion data
+ */
+struct mpr_data {
+	struct device		*dev;
+	const struct mpr_ops	*ops;
+	struct mutex		lock;
+	u32			pmin;
+	u32			pmax;
+	enum mpr_func_id	function;
+	u32			outmin;
+	u32			outmax;
+	int			scale;
+	int			scale2;
+	int			offset;
+	int			offset2;
+	struct gpio_desc	*gpiod_reset;
+	int			irq;
+	struct completion	completion;
+	struct mpr_chan		chan;
+	u8	    buffer[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+struct mpr_ops {
+	int (*init)(struct device *dev);
+	int (*read)(struct mpr_data *data, const u8 cmd, const u8 cnt);
+	int (*write)(struct mpr_data *data, const u8 cmd, const u8 cnt);
+};
+
+int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq);
+
+#endif
diff --git a/drivers/iio/pressure/mprls0025pa_i2c.c b/drivers/iio/pressure/mprls0025pa_i2c.c
new file mode 100644
index 0000000000..7a5c5aa2b4
--- /dev/null
+++ b/drivers/iio/pressure/mprls0025pa_i2c.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver
+ *
+ * Copyright (c) Andreas Klinger <ak@it-klinger.de>
+ *
+ * Data sheet:
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "mprls0025pa.h"
+
+static int mpr_i2c_init(struct device *unused)
+{
+	return 0;
+}
+
+static int mpr_i2c_read(struct mpr_data *data, const u8 unused, const u8 cnt)
+{
+	int ret;
+	struct i2c_client *client = to_i2c_client(data->dev);
+
+	if (cnt > MPR_MEASUREMENT_RD_SIZE)
+		return -EOVERFLOW;
+
+	memset(data->buffer, 0, MPR_MEASUREMENT_RD_SIZE);
+	ret = i2c_master_recv(client, data->buffer, cnt);
+	if (ret < 0)
+		return ret;
+	else if (ret != cnt)
+		return -EIO;
+
+	return 0;
+}
+
+static int mpr_i2c_write(struct mpr_data *data, const u8 cmd, const u8 unused)
+{
+	int ret;
+	struct i2c_client *client = to_i2c_client(data->dev);
+	u8 wdata[MPR_PKT_SYNC_LEN];
+
+	memset(wdata, 0, sizeof(wdata));
+	wdata[0] = cmd;
+
+	ret = i2c_master_send(client, wdata, MPR_PKT_SYNC_LEN);
+	if (ret < 0)
+		return ret;
+	else if (ret != MPR_PKT_SYNC_LEN)
+		return -EIO;
+
+	return 0;
+}
+
+static const struct mpr_ops mpr_i2c_ops = {
+	.init = mpr_i2c_init,
+	.read = mpr_i2c_read,
+	.write = mpr_i2c_write,
+};
+
+static int mpr_i2c_probe(struct i2c_client *client)
+{
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE))
+		return -EOPNOTSUPP;
+
+	return mpr_common_probe(&client->dev, &mpr_i2c_ops, client->irq);
+}
+
+static const struct of_device_id mpr_i2c_match[] = {
+	{ .compatible = "honeywell,mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mpr_i2c_match);
+
+static const struct i2c_device_id mpr_i2c_id[] = {
+	{ "mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, mpr_i2c_id);
+
+static struct i2c_driver mpr_i2c_driver = {
+	.probe = mpr_i2c_probe,
+	.id_table = mpr_i2c_id,
+	.driver = {
+		.name = "mprls0025pa",
+		.of_match_table = mpr_i2c_match,
+	},
+};
+module_i2c_driver(mpr_i2c_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("Honeywell MPR pressure sensor i2c driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA);
diff --git a/drivers/iio/pressure/mprls0025pa_spi.c b/drivers/iio/pressure/mprls0025pa_spi.c
new file mode 100644
index 0000000000..3aed14cd95
--- /dev/null
+++ b/drivers/iio/pressure/mprls0025pa_spi.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MPRLS0025PA - Honeywell MicroPressure MPR series SPI sensor driver
+ *
+ * Copyright (c) 2024 Petre Rodan <petre.rodan@subdimension.ro>
+ *
+ * Data sheet:
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include "mprls0025pa.h"
+
+struct mpr_spi_buf {
+	u8 tx[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+static int mpr_spi_init(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpr_spi_buf *buf;
+
+	buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, buf);
+
+	return 0;
+}
+
+static int mpr_spi_xfer(struct mpr_data *data, const u8 cmd, const u8 pkt_len)
+{
+	struct spi_device *spi = to_spi_device(data->dev);
+	struct mpr_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer;
+
+	if (pkt_len > MPR_MEASUREMENT_RD_SIZE)
+		return -EOVERFLOW;
+
+	buf->tx[0] = cmd;
+	xfer.tx_buf = buf->tx;
+	xfer.rx_buf = data->buffer;
+	xfer.len = pkt_len;
+
+	return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpr_ops mpr_spi_ops = {
+	.init = mpr_spi_init,
+	.read = mpr_spi_xfer,
+	.write = mpr_spi_xfer,
+};
+
+static int mpr_spi_probe(struct spi_device *spi)
+{
+	return mpr_common_probe(&spi->dev, &mpr_spi_ops, spi->irq);
+}
+
+static const struct of_device_id mpr_spi_match[] = {
+	{ .compatible = "honeywell,mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mpr_spi_match);
+
+static const struct spi_device_id mpr_spi_id[] = {
+	{ "mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mpr_spi_id);
+
+static struct spi_driver mpr_spi_driver = {
+	.driver = {
+		.name = "mprls0025pa",
+		.of_match_table = mpr_spi_match,
+	},
+	.probe = mpr_spi_probe,
+	.id_table = mpr_spi_id,
+};
+module_spi_driver(mpr_spi_driver);
+
+MODULE_AUTHOR("Petre Rodan <petre.rodan@subdimension.ro>");
+MODULE_DESCRIPTION("Honeywell MPR pressure sensor spi driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA);
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 5101552e3f..389523d6ae 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -7,7 +7,6 @@
  * Denis Ciocca <denis.ciocca@st.com>
  */
 
-#include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
@@ -55,13 +54,11 @@ static const struct of_device_id st_press_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id st_press_acpi_match[] = {
 	{"SNO9210", LPS22HB},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, st_press_acpi_match);
-#endif
 
 static const struct i2c_device_id st_press_id_table[] = {
 	{ LPS001WP_PRESS_DEV_NAME, LPS001WP },
@@ -114,7 +111,7 @@ static struct i2c_driver st_press_driver = {
 	.driver = {
 		.name = "st-press-i2c",
 		.of_match_table = st_press_of_match,
-		.acpi_match_table = ACPI_PTR(st_press_acpi_match),
+		.acpi_match_table = st_press_acpi_match,
 	},
 	.probe = st_press_i2c_probe,
 	.id_table = st_press_id_table,