summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/platform.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/infiniband/hw/hfi1/platform.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/infiniband/hw/hfi1/platform.c')
-rw-r--r--drivers/infiniband/hw/hfi1/platform.c1035
1 files changed, 1035 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/platform.c b/drivers/infiniband/hw/hfi1/platform.c
new file mode 100644
index 0000000000..54cbd8f1a6
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/platform.c
@@ -0,0 +1,1035 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * Copyright(c) 2015, 2016 Intel Corporation.
+ */
+
+#include <linux/firmware.h>
+
+#include "hfi.h"
+#include "efivar.h"
+#include "eprom.h"
+
+#define DEFAULT_PLATFORM_CONFIG_NAME "hfi1_platform.dat"
+
+static int validate_scratch_checksum(struct hfi1_devdata *dd)
+{
+ u64 checksum = 0, temp_scratch = 0;
+ int i, j, version;
+
+ temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH);
+ version = (temp_scratch & BITMAP_VERSION_SMASK) >> BITMAP_VERSION_SHIFT;
+
+ /* Prevent power on default of all zeroes from passing checksum */
+ if (!version) {
+ dd_dev_err(dd, "%s: Config bitmap uninitialized\n", __func__);
+ dd_dev_err(dd,
+ "%s: Please update your BIOS to support active channels\n",
+ __func__);
+ return 0;
+ }
+
+ /*
+ * ASIC scratch 0 only contains the checksum and bitmap version as
+ * fields of interest, both of which are handled separately from the
+ * loop below, so skip it
+ */
+ checksum += version;
+ for (i = 1; i < ASIC_NUM_SCRATCH; i++) {
+ temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH + (8 * i));
+ for (j = sizeof(u64); j != 0; j -= 2) {
+ checksum += (temp_scratch & 0xFFFF);
+ temp_scratch >>= 16;
+ }
+ }
+
+ while (checksum >> 16)
+ checksum = (checksum & CHECKSUM_MASK) + (checksum >> 16);
+
+ temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH);
+ temp_scratch &= CHECKSUM_SMASK;
+ temp_scratch >>= CHECKSUM_SHIFT;
+
+ if (checksum + temp_scratch == 0xFFFF)
+ return 1;
+
+ dd_dev_err(dd, "%s: Configuration bitmap corrupted\n", __func__);
+ return 0;
+}
+
+static void save_platform_config_fields(struct hfi1_devdata *dd)
+{
+ struct hfi1_pportdata *ppd = dd->pport;
+ u64 temp_scratch = 0, temp_dest = 0;
+
+ temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH_1);
+
+ temp_dest = temp_scratch &
+ (dd->hfi1_id ? PORT1_PORT_TYPE_SMASK :
+ PORT0_PORT_TYPE_SMASK);
+ ppd->port_type = temp_dest >>
+ (dd->hfi1_id ? PORT1_PORT_TYPE_SHIFT :
+ PORT0_PORT_TYPE_SHIFT);
+
+ temp_dest = temp_scratch &
+ (dd->hfi1_id ? PORT1_LOCAL_ATTEN_SMASK :
+ PORT0_LOCAL_ATTEN_SMASK);
+ ppd->local_atten = temp_dest >>
+ (dd->hfi1_id ? PORT1_LOCAL_ATTEN_SHIFT :
+ PORT0_LOCAL_ATTEN_SHIFT);
+
+ temp_dest = temp_scratch &
+ (dd->hfi1_id ? PORT1_REMOTE_ATTEN_SMASK :
+ PORT0_REMOTE_ATTEN_SMASK);
+ ppd->remote_atten = temp_dest >>
+ (dd->hfi1_id ? PORT1_REMOTE_ATTEN_SHIFT :
+ PORT0_REMOTE_ATTEN_SHIFT);
+
+ temp_dest = temp_scratch &
+ (dd->hfi1_id ? PORT1_DEFAULT_ATTEN_SMASK :
+ PORT0_DEFAULT_ATTEN_SMASK);
+ ppd->default_atten = temp_dest >>
+ (dd->hfi1_id ? PORT1_DEFAULT_ATTEN_SHIFT :
+ PORT0_DEFAULT_ATTEN_SHIFT);
+
+ temp_scratch = read_csr(dd, dd->hfi1_id ? ASIC_CFG_SCRATCH_3 :
+ ASIC_CFG_SCRATCH_2);
+
+ ppd->tx_preset_eq = (temp_scratch & TX_EQ_SMASK) >> TX_EQ_SHIFT;
+ ppd->tx_preset_noeq = (temp_scratch & TX_NO_EQ_SMASK) >> TX_NO_EQ_SHIFT;
+ ppd->rx_preset = (temp_scratch & RX_SMASK) >> RX_SHIFT;
+
+ ppd->max_power_class = (temp_scratch & QSFP_MAX_POWER_SMASK) >>
+ QSFP_MAX_POWER_SHIFT;
+
+ ppd->config_from_scratch = true;
+}
+
+void get_platform_config(struct hfi1_devdata *dd)
+{
+ int ret = 0;
+ u8 *temp_platform_config = NULL;
+ u32 esize;
+ const struct firmware *platform_config_file = NULL;
+
+ if (is_integrated(dd)) {
+ if (validate_scratch_checksum(dd)) {
+ save_platform_config_fields(dd);
+ return;
+ }
+ } else {
+ ret = eprom_read_platform_config(dd,
+ (void **)&temp_platform_config,
+ &esize);
+ if (!ret) {
+ /* success */
+ dd->platform_config.data = temp_platform_config;
+ dd->platform_config.size = esize;
+ return;
+ }
+ }
+ dd_dev_err(dd,
+ "%s: Failed to get platform config, falling back to sub-optimal default file\n",
+ __func__);
+
+ ret = request_firmware(&platform_config_file,
+ DEFAULT_PLATFORM_CONFIG_NAME,
+ &dd->pcidev->dev);
+ if (ret) {
+ dd_dev_err(dd,
+ "%s: No default platform config file found\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * Allocate separate memory block to store data and free firmware
+ * structure. This allows free_platform_config to treat EPROM and
+ * fallback configs in the same manner.
+ */
+ dd->platform_config.data = kmemdup(platform_config_file->data,
+ platform_config_file->size,
+ GFP_KERNEL);
+ dd->platform_config.size = platform_config_file->size;
+ release_firmware(platform_config_file);
+}
+
+void free_platform_config(struct hfi1_devdata *dd)
+{
+ /* Release memory allocated for eprom or fallback file read. */
+ kfree(dd->platform_config.data);
+ dd->platform_config.data = NULL;
+}
+
+void get_port_type(struct hfi1_pportdata *ppd)
+{
+ int ret;
+ u32 temp;
+
+ ret = get_platform_config_field(ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_PORT_TYPE, &temp,
+ 4);
+ if (ret) {
+ ppd->port_type = PORT_TYPE_UNKNOWN;
+ return;
+ }
+ ppd->port_type = temp;
+}
+
+int set_qsfp_tx(struct hfi1_pportdata *ppd, int on)
+{
+ u8 tx_ctrl_byte = on ? 0x0 : 0xF;
+ int ret = 0;
+
+ ret = qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_TX_CTRL_BYTE_OFFS,
+ &tx_ctrl_byte, 1);
+ /* we expected 1, so consider 0 an error */
+ if (ret == 0)
+ ret = -EIO;
+ else if (ret == 1)
+ ret = 0;
+ return ret;
+}
+
+static int qual_power(struct hfi1_pportdata *ppd)
+{
+ u32 cable_power_class = 0, power_class_max = 0;
+ u8 *cache = ppd->qsfp_info.cache;
+ int ret = 0;
+
+ ret = get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_SYSTEM_TABLE, 0,
+ SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, &power_class_max, 4);
+ if (ret)
+ return ret;
+
+ cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
+
+ if (cable_power_class > power_class_max)
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY);
+
+ if (ppd->offline_disabled_reason ==
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY)) {
+ dd_dev_err(
+ ppd->dd,
+ "%s: Port disabled due to system power restrictions\n",
+ __func__);
+ ret = -EPERM;
+ }
+ return ret;
+}
+
+static int qual_bitrate(struct hfi1_pportdata *ppd)
+{
+ u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
+ u8 *cache = ppd->qsfp_info.cache;
+
+ if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G) &&
+ cache[QSFP_NOM_BIT_RATE_250_OFFS] < 0x64)
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY);
+
+ if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G) &&
+ cache[QSFP_NOM_BIT_RATE_100_OFFS] < 0x7D)
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY);
+
+ if (ppd->offline_disabled_reason ==
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY)) {
+ dd_dev_err(
+ ppd->dd,
+ "%s: Cable failed bitrate check, disabling port\n",
+ __func__);
+ return -EPERM;
+ }
+ return 0;
+}
+
+static int set_qsfp_high_power(struct hfi1_pportdata *ppd)
+{
+ u8 cable_power_class = 0, power_ctrl_byte = 0;
+ u8 *cache = ppd->qsfp_info.cache;
+ int ret;
+
+ cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
+
+ if (cable_power_class > QSFP_POWER_CLASS_1) {
+ power_ctrl_byte = cache[QSFP_PWR_CTRL_BYTE_OFFS];
+
+ power_ctrl_byte |= 1;
+ power_ctrl_byte &= ~(0x2);
+
+ ret = qsfp_write(ppd, ppd->dd->hfi1_id,
+ QSFP_PWR_CTRL_BYTE_OFFS,
+ &power_ctrl_byte, 1);
+ if (ret != 1)
+ return -EIO;
+
+ if (cable_power_class > QSFP_POWER_CLASS_4) {
+ power_ctrl_byte |= (1 << 2);
+ ret = qsfp_write(ppd, ppd->dd->hfi1_id,
+ QSFP_PWR_CTRL_BYTE_OFFS,
+ &power_ctrl_byte, 1);
+ if (ret != 1)
+ return -EIO;
+ }
+
+ /* SFF 8679 rev 1.7 LPMode Deassert time */
+ msleep(300);
+ }
+ return 0;
+}
+
+static void apply_rx_cdr(struct hfi1_pportdata *ppd,
+ u32 rx_preset_index,
+ u8 *cdr_ctrl_byte)
+{
+ u32 rx_preset;
+ u8 *cache = ppd->qsfp_info.cache;
+ int cable_power_class;
+
+ if (!((cache[QSFP_MOD_PWR_OFFS] & 0x4) &&
+ (cache[QSFP_CDR_INFO_OFFS] & 0x40)))
+ return;
+
+ /* RX CDR present, bypass supported */
+ cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
+
+ if (cable_power_class <= QSFP_POWER_CLASS_3) {
+ /* Power class <= 3, ignore config & turn RX CDR on */
+ *cdr_ctrl_byte |= 0xF;
+ return;
+ }
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR_APPLY,
+ &rx_preset, 4);
+
+ if (!rx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: RX_CDR_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR,
+ &rx_preset, 4);
+
+ /* Expand cdr setting to all 4 lanes */
+ rx_preset = (rx_preset | (rx_preset << 1) |
+ (rx_preset << 2) | (rx_preset << 3));
+
+ if (rx_preset) {
+ *cdr_ctrl_byte |= rx_preset;
+ } else {
+ *cdr_ctrl_byte &= rx_preset;
+ /* Preserve current TX CDR status */
+ *cdr_ctrl_byte |= (cache[QSFP_CDR_CTRL_BYTE_OFFS] & 0xF0);
+ }
+}
+
+static void apply_tx_cdr(struct hfi1_pportdata *ppd,
+ u32 tx_preset_index,
+ u8 *cdr_ctrl_byte)
+{
+ u32 tx_preset;
+ u8 *cache = ppd->qsfp_info.cache;
+ int cable_power_class;
+
+ if (!((cache[QSFP_MOD_PWR_OFFS] & 0x8) &&
+ (cache[QSFP_CDR_INFO_OFFS] & 0x80)))
+ return;
+
+ /* TX CDR present, bypass supported */
+ cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
+
+ if (cable_power_class <= QSFP_POWER_CLASS_3) {
+ /* Power class <= 3, ignore config & turn TX CDR on */
+ *cdr_ctrl_byte |= 0xF0;
+ return;
+ }
+
+ get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index,
+ TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, &tx_preset, 4);
+
+ if (!tx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: TX_CDR_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+ get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_TX_PRESET_TABLE,
+ tx_preset_index,
+ TX_PRESET_TABLE_QSFP_TX_CDR, &tx_preset, 4);
+
+ /* Expand cdr setting to all 4 lanes */
+ tx_preset = (tx_preset | (tx_preset << 1) |
+ (tx_preset << 2) | (tx_preset << 3));
+
+ if (tx_preset)
+ *cdr_ctrl_byte |= (tx_preset << 4);
+ else
+ /* Preserve current/determined RX CDR status */
+ *cdr_ctrl_byte &= ((tx_preset << 4) | 0xF);
+}
+
+static void apply_cdr_settings(
+ struct hfi1_pportdata *ppd, u32 rx_preset_index,
+ u32 tx_preset_index)
+{
+ u8 *cache = ppd->qsfp_info.cache;
+ u8 cdr_ctrl_byte = cache[QSFP_CDR_CTRL_BYTE_OFFS];
+
+ apply_rx_cdr(ppd, rx_preset_index, &cdr_ctrl_byte);
+
+ apply_tx_cdr(ppd, tx_preset_index, &cdr_ctrl_byte);
+
+ qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_CDR_CTRL_BYTE_OFFS,
+ &cdr_ctrl_byte, 1);
+}
+
+static void apply_tx_eq_auto(struct hfi1_pportdata *ppd)
+{
+ u8 *cache = ppd->qsfp_info.cache;
+ u8 tx_eq;
+
+ if (!(cache[QSFP_EQ_INFO_OFFS] & 0x8))
+ return;
+ /* Disable adaptive TX EQ if present */
+ tx_eq = cache[(128 * 3) + 241];
+ tx_eq &= 0xF0;
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 241, &tx_eq, 1);
+}
+
+static void apply_tx_eq_prog(struct hfi1_pportdata *ppd, u32 tx_preset_index)
+{
+ u8 *cache = ppd->qsfp_info.cache;
+ u32 tx_preset;
+ u8 tx_eq;
+
+ if (!(cache[QSFP_EQ_INFO_OFFS] & 0x4))
+ return;
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
+ tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ_APPLY,
+ &tx_preset, 4);
+ if (!tx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: TX_EQ_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
+ tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ,
+ &tx_preset, 4);
+
+ if (((cache[(128 * 3) + 224] & 0xF0) >> 4) < tx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: TX EQ %x unsupported\n",
+ __func__, tx_preset);
+
+ dd_dev_info(
+ ppd->dd,
+ "%s: Applying EQ %x\n",
+ __func__, cache[608] & 0xF0);
+
+ tx_preset = (cache[608] & 0xF0) >> 4;
+ }
+
+ tx_eq = tx_preset | (tx_preset << 4);
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 234, &tx_eq, 1);
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 235, &tx_eq, 1);
+}
+
+static void apply_rx_eq_emp(struct hfi1_pportdata *ppd, u32 rx_preset_index)
+{
+ u32 rx_preset;
+ u8 rx_eq, *cache = ppd->qsfp_info.cache;
+
+ if (!(cache[QSFP_EQ_INFO_OFFS] & 0x2))
+ return;
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP_APPLY,
+ &rx_preset, 4);
+
+ if (!rx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: RX_EMP_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP,
+ &rx_preset, 4);
+
+ if ((cache[(128 * 3) + 224] & 0xF) < rx_preset) {
+ dd_dev_info(
+ ppd->dd,
+ "%s: Requested RX EMP %x\n",
+ __func__, rx_preset);
+
+ dd_dev_info(
+ ppd->dd,
+ "%s: Applying supported EMP %x\n",
+ __func__, cache[608] & 0xF);
+
+ rx_preset = cache[608] & 0xF;
+ }
+
+ rx_eq = rx_preset | (rx_preset << 4);
+
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 236, &rx_eq, 1);
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 237, &rx_eq, 1);
+}
+
+static void apply_eq_settings(struct hfi1_pportdata *ppd,
+ u32 rx_preset_index, u32 tx_preset_index)
+{
+ u8 *cache = ppd->qsfp_info.cache;
+
+ /* no point going on w/o a page 3 */
+ if (cache[2] & 4) {
+ dd_dev_info(ppd->dd,
+ "%s: Upper page 03 not present\n",
+ __func__);
+ return;
+ }
+
+ apply_tx_eq_auto(ppd);
+
+ apply_tx_eq_prog(ppd, tx_preset_index);
+
+ apply_rx_eq_emp(ppd, rx_preset_index);
+}
+
+static void apply_rx_amplitude_settings(
+ struct hfi1_pportdata *ppd, u32 rx_preset_index,
+ u32 tx_preset_index)
+{
+ u32 rx_preset;
+ u8 rx_amp = 0, i = 0, preferred = 0, *cache = ppd->qsfp_info.cache;
+
+ /* no point going on w/o a page 3 */
+ if (cache[2] & 4) {
+ dd_dev_info(ppd->dd,
+ "%s: Upper page 03 not present\n",
+ __func__);
+ return;
+ }
+ if (!(cache[QSFP_EQ_INFO_OFFS] & 0x1)) {
+ dd_dev_info(ppd->dd,
+ "%s: RX_AMP_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+
+ get_platform_config_field(ppd->dd,
+ PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index,
+ RX_PRESET_TABLE_QSFP_RX_AMP_APPLY,
+ &rx_preset, 4);
+
+ if (!rx_preset) {
+ dd_dev_info(ppd->dd,
+ "%s: RX_AMP_APPLY is set to disabled\n",
+ __func__);
+ return;
+ }
+ get_platform_config_field(ppd->dd,
+ PLATFORM_CONFIG_RX_PRESET_TABLE,
+ rx_preset_index,
+ RX_PRESET_TABLE_QSFP_RX_AMP,
+ &rx_preset, 4);
+
+ dd_dev_info(ppd->dd,
+ "%s: Requested RX AMP %x\n",
+ __func__,
+ rx_preset);
+
+ for (i = 0; i < 4; i++) {
+ if (cache[(128 * 3) + 225] & (1 << i)) {
+ preferred = i;
+ if (preferred == rx_preset)
+ break;
+ }
+ }
+
+ /*
+ * Verify that preferred RX amplitude is not just a
+ * fall through of the default
+ */
+ if (!preferred && !(cache[(128 * 3) + 225] & 0x1)) {
+ dd_dev_info(ppd->dd, "No supported RX AMP, not applying\n");
+ return;
+ }
+
+ dd_dev_info(ppd->dd,
+ "%s: Applying RX AMP %x\n", __func__, preferred);
+
+ rx_amp = preferred | (preferred << 4);
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 238, &rx_amp, 1);
+ qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 239, &rx_amp, 1);
+}
+
+#define OPA_INVALID_INDEX 0xFFF
+
+static void apply_tx_lanes(struct hfi1_pportdata *ppd, u8 field_id,
+ u32 config_data, const char *message)
+{
+ u8 i;
+ int ret;
+
+ for (i = 0; i < 4; i++) {
+ ret = load_8051_config(ppd->dd, field_id, i, config_data);
+ if (ret != HCMD_SUCCESS) {
+ dd_dev_err(
+ ppd->dd,
+ "%s: %s for lane %u failed\n",
+ message, __func__, i);
+ }
+ }
+}
+
+/*
+ * Return a special SerDes setting for low power AOC cables. The power class
+ * threshold and setting being used were all found by empirical testing.
+ *
+ * Summary of the logic:
+ *
+ * if (QSFP and QSFP_TYPE == AOC and QSFP_POWER_CLASS < 4)
+ * return 0xe
+ * return 0; // leave at default
+ */
+static u8 aoc_low_power_setting(struct hfi1_pportdata *ppd)
+{
+ u8 *cache = ppd->qsfp_info.cache;
+ int power_class;
+
+ /* QSFP only */
+ if (ppd->port_type != PORT_TYPE_QSFP)
+ return 0; /* leave at default */
+
+ /* active optical cables only */
+ switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) {
+ case 0x0 ... 0x9: fallthrough;
+ case 0xC: fallthrough;
+ case 0xE:
+ /* active AOC */
+ power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
+ if (power_class < QSFP_POWER_CLASS_4)
+ return 0xe;
+ }
+ return 0; /* leave at default */
+}
+
+static void apply_tunings(
+ struct hfi1_pportdata *ppd, u32 tx_preset_index,
+ u8 tuning_method, u32 total_atten, u8 limiting_active)
+{
+ int ret = 0;
+ u32 config_data = 0, tx_preset = 0;
+ u8 precur = 0, attn = 0, postcur = 0, external_device_config = 0;
+ u8 *cache = ppd->qsfp_info.cache;
+
+ /* Pass tuning method to 8051 */
+ read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG,
+ &config_data);
+ config_data &= ~(0xff << TUNING_METHOD_SHIFT);
+ config_data |= ((u32)tuning_method << TUNING_METHOD_SHIFT);
+ ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG,
+ config_data);
+ if (ret != HCMD_SUCCESS)
+ dd_dev_err(ppd->dd, "%s: Failed to set tuning method\n",
+ __func__);
+
+ /* Set same channel loss for both TX and RX */
+ config_data = 0 | (total_atten << 16) | (total_atten << 24);
+ apply_tx_lanes(ppd, CHANNEL_LOSS_SETTINGS, config_data,
+ "Setting channel loss");
+
+ /* Inform 8051 of cable capabilities */
+ if (ppd->qsfp_info.cache_valid) {
+ external_device_config =
+ ((cache[QSFP_MOD_PWR_OFFS] & 0x4) << 3) |
+ ((cache[QSFP_MOD_PWR_OFFS] & 0x8) << 2) |
+ ((cache[QSFP_EQ_INFO_OFFS] & 0x2) << 1) |
+ (cache[QSFP_EQ_INFO_OFFS] & 0x4);
+ ret = read_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS,
+ GENERAL_CONFIG, &config_data);
+ /* Clear, then set the external device config field */
+ config_data &= ~(u32)0xFF;
+ config_data |= external_device_config;
+ ret = load_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS,
+ GENERAL_CONFIG, config_data);
+ if (ret != HCMD_SUCCESS)
+ dd_dev_err(ppd->dd,
+ "%s: Failed set ext device config params\n",
+ __func__);
+ }
+
+ if (tx_preset_index == OPA_INVALID_INDEX) {
+ if (ppd->port_type == PORT_TYPE_QSFP && limiting_active)
+ dd_dev_err(ppd->dd, "%s: Invalid Tx preset index\n",
+ __func__);
+ return;
+ }
+
+ /* Following for limiting active channels only */
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index,
+ TX_PRESET_TABLE_PRECUR, &tx_preset, 4);
+ precur = tx_preset;
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
+ tx_preset_index, TX_PRESET_TABLE_ATTN, &tx_preset, 4);
+ attn = tx_preset;
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
+ tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4);
+ postcur = tx_preset;
+
+ /*
+ * NOTES:
+ * o The aoc_low_power_setting is applied to all lanes even
+ * though only lane 0's value is examined by the firmware.
+ * o A lingering low power setting after a cable swap does
+ * not occur. On cable unplug the 8051 is reset and
+ * restarted on cable insert. This resets all settings to
+ * their default, erasing any previous low power setting.
+ */
+ config_data = precur | (attn << 8) | (postcur << 16) |
+ (aoc_low_power_setting(ppd) << 24);
+
+ apply_tx_lanes(ppd, TX_EQ_SETTINGS, config_data,
+ "Applying TX settings");
+}
+
+/* Must be holding the QSFP i2c resource */
+static int tune_active_qsfp(struct hfi1_pportdata *ppd, u32 *ptr_tx_preset,
+ u32 *ptr_rx_preset, u32 *ptr_total_atten)
+{
+ int ret;
+ u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
+ u8 *cache = ppd->qsfp_info.cache;
+
+ ppd->qsfp_info.limiting_active = 1;
+
+ ret = set_qsfp_tx(ppd, 0);
+ if (ret)
+ return ret;
+
+ ret = qual_power(ppd);
+ if (ret)
+ return ret;
+
+ ret = qual_bitrate(ppd);
+ if (ret)
+ return ret;
+
+ /*
+ * We'll change the QSFP memory contents from here on out, thus we set a
+ * flag here to remind ourselves to reset the QSFP module. This prevents
+ * reuse of stale settings established in our previous pass through.
+ */
+ if (ppd->qsfp_info.reset_needed) {
+ ret = reset_qsfp(ppd);
+ if (ret)
+ return ret;
+ refresh_qsfp_cache(ppd, &ppd->qsfp_info);
+ } else {
+ ppd->qsfp_info.reset_needed = 1;
+ }
+
+ ret = set_qsfp_high_power(ppd);
+ if (ret)
+ return ret;
+
+ if (cache[QSFP_EQ_INFO_OFFS] & 0x4) {
+ ret = get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ,
+ ptr_tx_preset, 4);
+ if (ret) {
+ *ptr_tx_preset = OPA_INVALID_INDEX;
+ return ret;
+ }
+ } else {
+ ret = get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ,
+ ptr_tx_preset, 4);
+ if (ret) {
+ *ptr_tx_preset = OPA_INVALID_INDEX;
+ return ret;
+ }
+ }
+
+ ret = get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_RX_PRESET_IDX, ptr_rx_preset, 4);
+ if (ret) {
+ *ptr_rx_preset = OPA_INVALID_INDEX;
+ return ret;
+ }
+
+ if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G))
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_LOCAL_ATTEN_25G, ptr_total_atten, 4);
+ else if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G))
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_LOCAL_ATTEN_12G, ptr_total_atten, 4);
+
+ apply_cdr_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
+
+ apply_eq_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
+
+ apply_rx_amplitude_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
+
+ ret = set_qsfp_tx(ppd, 1);
+
+ return ret;
+}
+
+static int tune_qsfp(struct hfi1_pportdata *ppd,
+ u32 *ptr_tx_preset, u32 *ptr_rx_preset,
+ u8 *ptr_tuning_method, u32 *ptr_total_atten)
+{
+ u32 cable_atten = 0, remote_atten = 0, platform_atten = 0;
+ u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
+ int ret = 0;
+ u8 *cache = ppd->qsfp_info.cache;
+
+ switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) {
+ case 0xA ... 0xB:
+ ret = get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_LOCAL_ATTEN_25G,
+ &platform_atten, 4);
+ if (ret)
+ return ret;
+
+ if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G))
+ cable_atten = cache[QSFP_CU_ATTEN_12G_OFFS];
+ else if ((lss & OPA_LINK_SPEED_12_5G) &&
+ (lse & OPA_LINK_SPEED_12_5G))
+ cable_atten = cache[QSFP_CU_ATTEN_7G_OFFS];
+
+ /* Fallback to configured attenuation if cable memory is bad */
+ if (cable_atten == 0 || cable_atten > 36) {
+ ret = get_platform_config_field(
+ ppd->dd,
+ PLATFORM_CONFIG_SYSTEM_TABLE, 0,
+ SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G,
+ &cable_atten, 4);
+ if (ret)
+ return ret;
+ }
+
+ ret = get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4);
+ if (ret)
+ return ret;
+
+ *ptr_total_atten = platform_atten + cable_atten + remote_atten;
+
+ *ptr_tuning_method = OPA_PASSIVE_TUNING;
+ break;
+ case 0x0 ... 0x9: fallthrough;
+ case 0xC: fallthrough;
+ case 0xE:
+ ret = tune_active_qsfp(ppd, ptr_tx_preset, ptr_rx_preset,
+ ptr_total_atten);
+ if (ret)
+ return ret;
+
+ *ptr_tuning_method = OPA_ACTIVE_TUNING;
+ break;
+ case 0xD: fallthrough;
+ case 0xF:
+ default:
+ dd_dev_warn(ppd->dd, "%s: Unknown/unsupported cable\n",
+ __func__);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * This function communicates its success or failure via ppd->driver_link_ready
+ * Thus, it depends on its association with start_link(...) which checks
+ * driver_link_ready before proceeding with the link negotiation and
+ * initialization process.
+ */
+void tune_serdes(struct hfi1_pportdata *ppd)
+{
+ int ret = 0;
+ u32 total_atten = 0;
+ u32 remote_atten = 0, platform_atten = 0;
+ u32 rx_preset_index, tx_preset_index;
+ u8 tuning_method = 0, limiting_active = 0;
+ struct hfi1_devdata *dd = ppd->dd;
+
+ rx_preset_index = OPA_INVALID_INDEX;
+ tx_preset_index = OPA_INVALID_INDEX;
+
+ /* the link defaults to enabled */
+ ppd->link_enabled = 1;
+ /* the driver link ready state defaults to not ready */
+ ppd->driver_link_ready = 0;
+ ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE);
+
+ /* Skip the tuning for testing (loopback != none) and simulations */
+ if (loopback != LOOPBACK_NONE ||
+ ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) {
+ ppd->driver_link_ready = 1;
+
+ if (qsfp_mod_present(ppd)) {
+ ret = acquire_chip_resource(ppd->dd,
+ qsfp_resource(ppd->dd),
+ QSFP_WAIT);
+ if (ret) {
+ dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n",
+ __func__, (int)ppd->dd->hfi1_id);
+ goto bail;
+ }
+
+ refresh_qsfp_cache(ppd, &ppd->qsfp_info);
+ release_chip_resource(ppd->dd, qsfp_resource(ppd->dd));
+ }
+
+ return;
+ }
+
+ switch (ppd->port_type) {
+ case PORT_TYPE_DISCONNECTED:
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_DISCONNECTED);
+ dd_dev_warn(dd, "%s: Port disconnected, disabling port\n",
+ __func__);
+ goto bail;
+ case PORT_TYPE_FIXED:
+ /* platform_atten, remote_atten pre-zeroed to catch error */
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_LOCAL_ATTEN_25G, &platform_atten, 4);
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4);
+
+ total_atten = platform_atten + remote_atten;
+
+ tuning_method = OPA_PASSIVE_TUNING;
+ break;
+ case PORT_TYPE_VARIABLE:
+ if (qsfp_mod_present(ppd)) {
+ /*
+ * platform_atten, remote_atten pre-zeroed to
+ * catch error
+ */
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_LOCAL_ATTEN_25G,
+ &platform_atten, 4);
+
+ get_platform_config_field(
+ ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
+ PORT_TABLE_REMOTE_ATTEN_25G,
+ &remote_atten, 4);
+
+ total_atten = platform_atten + remote_atten;
+
+ tuning_method = OPA_PASSIVE_TUNING;
+ } else {
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_CHASSIS_CONFIG);
+ goto bail;
+ }
+ break;
+ case PORT_TYPE_QSFP:
+ if (qsfp_mod_present(ppd)) {
+ ret = acquire_chip_resource(ppd->dd,
+ qsfp_resource(ppd->dd),
+ QSFP_WAIT);
+ if (ret) {
+ dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n",
+ __func__, (int)ppd->dd->hfi1_id);
+ goto bail;
+ }
+ refresh_qsfp_cache(ppd, &ppd->qsfp_info);
+
+ if (ppd->qsfp_info.cache_valid) {
+ ret = tune_qsfp(ppd,
+ &tx_preset_index,
+ &rx_preset_index,
+ &tuning_method,
+ &total_atten);
+
+ /*
+ * We may have modified the QSFP memory, so
+ * update the cache to reflect the changes
+ */
+ refresh_qsfp_cache(ppd, &ppd->qsfp_info);
+ limiting_active =
+ ppd->qsfp_info.limiting_active;
+ } else {
+ dd_dev_err(dd,
+ "%s: Reading QSFP memory failed\n",
+ __func__);
+ ret = -EINVAL; /* a fail indication */
+ }
+ release_chip_resource(ppd->dd, qsfp_resource(ppd->dd));
+ if (ret)
+ goto bail;
+ } else {
+ ppd->offline_disabled_reason =
+ HFI1_ODR_MASK(
+ OPA_LINKDOWN_REASON_LOCAL_MEDIA_NOT_INSTALLED);
+ goto bail;
+ }
+ break;
+ default:
+ dd_dev_warn(ppd->dd, "%s: Unknown port type\n", __func__);
+ ppd->port_type = PORT_TYPE_UNKNOWN;
+ tuning_method = OPA_UNKNOWN_TUNING;
+ total_atten = 0;
+ limiting_active = 0;
+ tx_preset_index = OPA_INVALID_INDEX;
+ break;
+ }
+
+ if (ppd->offline_disabled_reason ==
+ HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE))
+ apply_tunings(ppd, tx_preset_index, tuning_method,
+ total_atten, limiting_active);
+
+ if (!ret)
+ ppd->driver_link_ready = 1;
+
+ return;
+bail:
+ ppd->driver_link_ready = 0;
+}