Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 480 insertions, 0 deletions

diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
new file mode 100644
index 0000000000..ba747c5b2b
--- /dev/null
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2010-2011, 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define PON_REV2			0x01
+
+#define PON_SUBTYPE			0x05
+
+#define PON_SUBTYPE_PRIMARY		0x01
+#define PON_SUBTYPE_SECONDARY		0x02
+#define PON_SUBTYPE_1REG		0x03
+#define PON_SUBTYPE_GEN2_PRIMARY	0x04
+#define PON_SUBTYPE_GEN2_SECONDARY	0x05
+#define PON_SUBTYPE_GEN3_PBS		0x08
+#define PON_SUBTYPE_GEN3_HLOS		0x09
+
+#define PON_RT_STS			0x10
+#define  PON_KPDPWR_N_SET		BIT(0)
+#define  PON_RESIN_N_SET		BIT(1)
+#define  PON_GEN3_RESIN_N_SET		BIT(6)
+#define  PON_GEN3_KPDPWR_N_SET		BIT(7)
+
+#define PON_PS_HOLD_RST_CTL		0x5a
+#define PON_PS_HOLD_RST_CTL2		0x5b
+#define  PON_PS_HOLD_ENABLE		BIT(7)
+#define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_WARM_RESET	1
+#define  PON_PS_HOLD_TYPE_SHUTDOWN	4
+#define  PON_PS_HOLD_TYPE_HARD_RESET	7
+
+#define PON_PULL_CTL			0x70
+#define  PON_KPDPWR_PULL_UP		BIT(1)
+#define  PON_RESIN_PULL_UP		BIT(0)
+
+#define PON_DBC_CTL			0x71
+#define  PON_DBC_DELAY_MASK_GEN1	0x7
+#define  PON_DBC_DELAY_MASK_GEN2	0xf
+#define  PON_DBC_SHIFT_GEN1		6
+#define  PON_DBC_SHIFT_GEN2		14
+
+struct pm8941_data {
+	unsigned int	pull_up_bit;
+	unsigned int	status_bit;
+	bool		supports_ps_hold_poff_config;
+	bool		supports_debounce_config;
+	bool		has_pon_pbs;
+	const char	*name;
+	const char	*phys;
+};
+
+struct pm8941_pwrkey {
+	struct device *dev;
+	int irq;
+	u32 baseaddr;
+	u32 pon_pbs_baseaddr;
+	struct regmap *regmap;
+	struct input_dev *input;
+
+	unsigned int revision;
+	unsigned int subtype;
+	struct notifier_block reboot_notifier;
+
+	u32 code;
+	u32 sw_debounce_time_us;
+	ktime_t sw_debounce_end_time;
+	bool last_status;
+	const struct pm8941_data *data;
+};
+
+static int pm8941_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
+						    reboot_notifier);
+	unsigned int enable_reg;
+	unsigned int reset_type;
+	int error;
+
+	/* PMICs with revision 0 have the enable bit in same register as ctrl */
+	if (pwrkey->revision == 0)
+		enable_reg = PON_PS_HOLD_RST_CTL;
+	else
+		enable_reg = PON_PS_HOLD_RST_CTL2;
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   0);
+	if (error)
+		dev_err(pwrkey->dev,
+			"unable to clear ps hold reset enable: %d\n",
+			error);
+
+	/*
+	 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
+	 * writes.
+	 */
+	usleep_range(100, 1000);
+
+	switch (code) {
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
+		break;
+	case SYS_RESTART:
+	default:
+		if (reboot_mode == REBOOT_WARM)
+			reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
+		else
+			reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+		break;
+	}
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
+				   PON_PS_HOLD_TYPE_MASK,
+				   reset_type);
+	if (error)
+		dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
+			error);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   PON_PS_HOLD_ENABLE);
+	if (error)
+		dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
+
+	return NOTIFY_DONE;
+}
+
+static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
+{
+	struct pm8941_pwrkey *pwrkey = _data;
+	unsigned int sts;
+	int err;
+
+	if (pwrkey->sw_debounce_time_us) {
+		if (ktime_before(ktime_get(), pwrkey->sw_debounce_end_time)) {
+			dev_dbg(pwrkey->dev,
+				"ignoring key event received before debounce end %llu us\n",
+				pwrkey->sw_debounce_end_time);
+			return IRQ_HANDLED;
+		}
+	}
+
+	err = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_RT_STS, &sts);
+	if (err)
+		return IRQ_HANDLED;
+
+	sts &= pwrkey->data->status_bit;
+
+	if (pwrkey->sw_debounce_time_us && !sts)
+		pwrkey->sw_debounce_end_time = ktime_add_us(ktime_get(),
+						pwrkey->sw_debounce_time_us);
+
+	/*
+	 * Simulate a press event in case a release event occurred without a
+	 * corresponding press event.
+	 */
+	if (!pwrkey->last_status && !sts) {
+		input_report_key(pwrkey->input, pwrkey->code, 1);
+		input_sync(pwrkey->input);
+	}
+	pwrkey->last_status = sts;
+
+	input_report_key(pwrkey->input, pwrkey->code, sts);
+	input_sync(pwrkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static int pm8941_pwrkey_sw_debounce_init(struct pm8941_pwrkey *pwrkey)
+{
+	unsigned int val, addr, mask;
+	int error;
+
+	if (pwrkey->data->has_pon_pbs && !pwrkey->pon_pbs_baseaddr) {
+		dev_err(pwrkey->dev,
+			"PON_PBS address missing, can't read HW debounce time\n");
+		return 0;
+	}
+
+	if (pwrkey->pon_pbs_baseaddr)
+		addr = pwrkey->pon_pbs_baseaddr + PON_DBC_CTL;
+	else
+		addr = pwrkey->baseaddr + PON_DBC_CTL;
+	error = regmap_read(pwrkey->regmap, addr, &val);
+	if (error)
+		return error;
+
+	if (pwrkey->subtype >= PON_SUBTYPE_GEN2_PRIMARY)
+		mask = 0xf;
+	else
+		mask = 0x7;
+
+	pwrkey->sw_debounce_time_us =
+		2 * USEC_PER_SEC / (1 << (mask - (val & mask)));
+
+	dev_dbg(pwrkey->dev, "SW debounce time = %u us\n",
+		pwrkey->sw_debounce_time_us);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_suspend(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_resume(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
+				pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+
+static int pm8941_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey;
+	bool pull_up;
+	struct device *parent;
+	struct device_node *regmap_node;
+	const __be32 *addr;
+	u32 req_delay, mask, delay_shift;
+	int error;
+
+	if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
+		req_delay = 15625;
+
+	if (req_delay > 2000000 || req_delay == 0) {
+		dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
+		return -EINVAL;
+	}
+
+	pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
+
+	pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
+	if (!pwrkey)
+		return -ENOMEM;
+
+	pwrkey->dev = &pdev->dev;
+	pwrkey->data = of_device_get_match_data(&pdev->dev);
+
+	parent = pdev->dev.parent;
+	regmap_node = pdev->dev.of_node;
+	pwrkey->regmap = dev_get_regmap(parent, NULL);
+	if (!pwrkey->regmap) {
+		regmap_node = parent->of_node;
+		/*
+		 * We failed to get regmap for parent. Let's see if we are
+		 * a child of pon node and read regmap and reg from its
+		 * parent.
+		 */
+		pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
+		if (!pwrkey->regmap) {
+			dev_err(&pdev->dev, "failed to locate regmap\n");
+			return -ENODEV;
+		}
+	}
+
+	addr = of_get_address(regmap_node, 0, NULL, NULL);
+	if (!addr) {
+		dev_err(&pdev->dev, "reg property missing\n");
+		return -EINVAL;
+	}
+	pwrkey->baseaddr = be32_to_cpup(addr);
+
+	if (pwrkey->data->has_pon_pbs) {
+		/* PON_PBS base address is optional */
+		addr = of_get_address(regmap_node, 1, NULL, NULL);
+		if (addr)
+			pwrkey->pon_pbs_baseaddr = be32_to_cpup(addr);
+	}
+
+	pwrkey->irq = platform_get_irq(pdev, 0);
+	if (pwrkey->irq < 0)
+		return pwrkey->irq;
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
+			    &pwrkey->revision);
+	if (error) {
+		dev_err(&pdev->dev, "failed to read revision: %d\n", error);
+		return error;
+	}
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_SUBTYPE,
+			    &pwrkey->subtype);
+	if (error) {
+		dev_err(&pdev->dev, "failed to read subtype: %d\n", error);
+		return error;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "linux,code",
+				     &pwrkey->code);
+	if (error) {
+		dev_dbg(&pdev->dev,
+			"no linux,code assuming power (%d)\n", error);
+		pwrkey->code = KEY_POWER;
+	}
+
+	pwrkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrkey->input) {
+		dev_dbg(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
+
+	pwrkey->input->name = pwrkey->data->name;
+	pwrkey->input->phys = pwrkey->data->phys;
+
+	if (pwrkey->data->supports_debounce_config) {
+		if (pwrkey->subtype >= PON_SUBTYPE_GEN2_PRIMARY) {
+			mask = PON_DBC_DELAY_MASK_GEN2;
+			delay_shift = PON_DBC_SHIFT_GEN2;
+		} else {
+			mask = PON_DBC_DELAY_MASK_GEN1;
+			delay_shift = PON_DBC_SHIFT_GEN1;
+		}
+
+		req_delay = (req_delay << delay_shift) / USEC_PER_SEC;
+		req_delay = ilog2(req_delay);
+
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_DBC_CTL,
+					   mask,
+					   req_delay);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set debounce: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	error = pm8941_pwrkey_sw_debounce_init(pwrkey);
+	if (error)
+		return error;
+
+	if (pwrkey->data->pull_up_bit) {
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_PULL_CTL,
+					   pwrkey->data->pull_up_bit,
+					   pull_up ? pwrkey->data->pull_up_bit :
+						     0);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+			return error;
+		}
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
+					  NULL, pm8941_pwrkey_irq,
+					  IRQF_ONESHOT,
+					  pwrkey->data->name, pwrkey);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(pwrkey->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			error);
+		return error;
+	}
+
+	if (pwrkey->data->supports_ps_hold_poff_config) {
+		pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
+		error = register_reboot_notifier(&pwrkey->reboot_notifier);
+		if (error) {
+			dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	platform_set_drvdata(pdev, pwrkey);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_remove(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
+
+	if (pwrkey->data->supports_ps_hold_poff_config)
+		unregister_reboot_notifier(&pwrkey->reboot_notifier);
+
+	return 0;
+}
+
+static const struct pm8941_data pwrkey_data = {
+	.pull_up_bit = PON_KPDPWR_PULL_UP,
+	.status_bit = PON_KPDPWR_N_SET,
+	.name = "pm8941_pwrkey",
+	.phys = "pm8941_pwrkey/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
+	.has_pon_pbs = false,
+};
+
+static const struct pm8941_data resin_data = {
+	.pull_up_bit = PON_RESIN_PULL_UP,
+	.status_bit = PON_RESIN_N_SET,
+	.name = "pm8941_resin",
+	.phys = "pm8941_resin/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
+	.has_pon_pbs = false,
+};
+
+static const struct pm8941_data pon_gen3_pwrkey_data = {
+	.status_bit = PON_GEN3_KPDPWR_N_SET,
+	.name = "pmic_pwrkey",
+	.phys = "pmic_pwrkey/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
+	.has_pon_pbs = true,
+};
+
+static const struct pm8941_data pon_gen3_resin_data = {
+	.status_bit = PON_GEN3_RESIN_N_SET,
+	.name = "pmic_resin",
+	.phys = "pmic_resin/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
+	.has_pon_pbs = true,
+};
+
+static const struct of_device_id pm8941_pwr_key_id_table[] = {
+	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
+	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+	{ .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
+	{ .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
+
+static struct platform_driver pm8941_pwrkey_driver = {
+	.probe = pm8941_pwrkey_probe,
+	.remove = pm8941_pwrkey_remove,
+	.driver = {
+		.name = "pm8941-pwrkey",
+		.pm = pm_sleep_ptr(&pm8941_pwr_key_pm_ops),
+		.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
+	},
+};
+module_platform_driver(pm8941_pwrkey_driver);
+
+MODULE_DESCRIPTION("PM8941 Power Key driver");
+MODULE_LICENSE("GPL v2");