Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 341 insertions, 103 deletions

diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c
index ce82548916..c1fa75c0f9 100644
--- a/drivers/input/misc/da7280.c
+++ b/drivers/input/misc/da7280.c
@@ -352,7 +352,7 @@ static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled)
 		state.duty_cycle = period_mag_multi;
 	}
 
-	error = pwm_apply_state(haptics->pwm_dev, &state);
+	error = pwm_apply_might_sleep(haptics->pwm_dev, &state);
 	if (error)
 		dev_err(haptics->dev, "Failed to apply pwm state: %d\n", error);
 
@@ -1175,7 +1175,7 @@ static int da7280_probe(struct i2c_client *client)
 		/* Sync up PWM state and ensure it is off. */
 		pwm_init_state(haptics->pwm_dev, &state);
 		state.enabled = false;
-		error = pwm_apply_state(haptics->pwm_dev, &state);
+		error = pwm_apply_might_sleep(haptics->pwm_dev, &state);
 		if (error) {
 			dev_err(dev, "Failed to apply PWM state: %d\n", error);
 			return error;
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
index 74808bae32..c338765e0e 100644
--- a/drivers/input/misc/da9063_onkey.c
+++ b/drivers/input/misc/da9063_onkey.c
@@ -9,11 +9,12 @@
 #include <linux/errno.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
+#include <linux/property.h>
 #include <linux/workqueue.h>
 #include <linux/regmap.h>
-#include <linux/of.h>
 #include <linux/mfd/da9063/core.h>
 #include <linux/mfd/da9063/registers.h>
 #include <linux/mfd/da9062/core.h>
@@ -74,13 +75,6 @@ static const struct da906x_chip_config da9062_regs = {
 	.name = "da9062-onkey",
 };
 
-static const struct of_device_id da9063_compatible_reg_id_table[] = {
-	{ .compatible = "dlg,da9063-onkey", .data = &da9063_regs },
-	{ .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
-
 static void da9063_poll_on(struct work_struct *work)
 {
 	struct da9063_onkey *onkey = container_of(work,
@@ -187,56 +181,43 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
 static int da9063_onkey_probe(struct platform_device *pdev)
 {
 	struct da9063_onkey *onkey;
-	const struct of_device_id *match;
-	int irq;
 	int error;
-
-	match = of_match_node(da9063_compatible_reg_id_table,
-			      pdev->dev.of_node);
-	if (!match)
-		return -ENXIO;
+	int irq;
 
 	onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
 			     GFP_KERNEL);
-	if (!onkey) {
-		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+	if (!onkey)
 		return -ENOMEM;
-	}
 
-	onkey->config = match->data;
+	onkey->config = device_get_match_data(&pdev->dev);
+	if (!onkey->config)
+		return -ENXIO;
+
 	onkey->dev = &pdev->dev;
 
 	onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!onkey->regmap) {
-		dev_err(&pdev->dev, "Parent regmap unavailable.\n");
-		return -ENXIO;
-	}
+	if (!onkey->regmap)
+		return dev_err_probe(&pdev->dev, -ENXIO,
+				     "Parent regmap unavailable.\n");
 
-	onkey->key_power = !of_property_read_bool(pdev->dev.of_node,
-						  "dlg,disable-key-power");
+	onkey->key_power = !device_property_read_bool(&pdev->dev,
+						      "dlg,disable-key-power");
 
 	onkey->input = devm_input_allocate_device(&pdev->dev);
-	if (!onkey->input) {
-		dev_err(&pdev->dev, "Failed to allocated input device.\n");
+	if (!onkey->input)
 		return -ENOMEM;
-	}
 
 	onkey->input->name = onkey->config->name;
 	snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0",
 		 onkey->config->name);
 	onkey->input->phys = onkey->phys;
-	onkey->input->dev.parent = &pdev->dev;
 
 	input_set_capability(onkey->input, EV_KEY, KEY_POWER);
 
 	error = devm_delayed_work_autocancel(&pdev->dev, &onkey->work,
 					     da9063_poll_on);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to add cancel poll action: %d\n",
-			error);
+	if (error)
 		return error;
-	}
 
 	irq = platform_get_irq_byname(pdev, "ONKEY");
 	if (irq < 0)
@@ -246,11 +227,9 @@ static int da9063_onkey_probe(struct platform_device *pdev)
 					  NULL, da9063_onkey_irq_handler,
 					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 					  "ONKEY", onkey);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to request IRQ %d: %d\n", irq, error);
-		return error;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error,
+				     "Failed to allocate onkey IRQ\n");
 
 	error = dev_pm_set_wake_irq(&pdev->dev, irq);
 	if (error)
@@ -261,15 +240,19 @@ static int da9063_onkey_probe(struct platform_device *pdev)
 		device_init_wakeup(&pdev->dev, true);
 
 	error = input_register_device(onkey->input);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to register input device: %d\n", error);
+	if (error)
 		return error;
-	}
 
 	return 0;
 }
 
+static const struct of_device_id da9063_compatible_reg_id_table[] = {
+	{ .compatible = "dlg,da9063-onkey", .data = &da9063_regs },
+	{ .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
+
 static struct platform_driver da9063_onkey_driver = {
 	.probe	= da9063_onkey_probe,
 	.driver	= {
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index b2f1292e27..6e8cc28deb 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1050,7 +1050,7 @@ static ssize_t ims_pcu_attribute_show(struct device *dev,
 			container_of(dattr, struct ims_pcu_attribute, dattr);
 	char *field = (char *)pcu + attr->field_offset;
 
-	return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field);
+	return sysfs_emit(buf, "%.*s\n", attr->field_length, field);
 }
 
 static ssize_t ims_pcu_attribute_store(struct device *dev,
@@ -1206,7 +1206,7 @@ ims_pcu_update_firmware_status_show(struct device *dev,
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct ims_pcu *pcu = usb_get_intfdata(intf);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status);
+	return sysfs_emit(buf, "%d\n", pcu->update_firmware_status);
 }
 
 static DEVICE_ATTR(update_firmware_status, S_IRUGO,
@@ -1309,7 +1309,7 @@ static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%x\n", data);
+	return sysfs_emit(buf, "%x\n", data);
 }
 
 static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev,
@@ -1344,7 +1344,7 @@ static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev,
 	int error;
 
 	mutex_lock(&pcu->cmd_mutex);
-	error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr);
+	error = sysfs_emit(buf, "%x\n", pcu->ofn_reg_addr);
 	mutex_unlock(&pcu->cmd_mutex);
 
 	return error;
@@ -1397,7 +1397,7 @@ static ssize_t ims_pcu_ofn_bit_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr)));
+	return sysfs_emit(buf, "%d\n", !!(data & (1 << attr->nr)));
 }
 
 static ssize_t ims_pcu_ofn_bit_store(struct device *dev,
diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
index 3c636c75e8..cd14ff9f57 100644
--- a/drivers/input/misc/iqs269a.c
+++ b/drivers/input/misc/iqs269a.c
@@ -9,6 +9,7 @@
  * axial sliders presented by the device.
  */
 
+#include <linux/bits.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -26,6 +27,8 @@
 
 #define IQS269_VER_INFO				0x00
 #define IQS269_VER_INFO_PROD_NUM		0x4F
+#define IQS269_VER_INFO_FW_NUM_2		0x03
+#define IQS269_VER_INFO_FW_NUM_3		0x10
 
 #define IQS269_SYS_FLAGS			0x02
 #define IQS269_SYS_FLAGS_SHOW_RESET		BIT(15)
@@ -53,6 +56,7 @@
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_MASK	GENMASK(10, 8)
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT	8
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_MAX	7
+#define IQS269_SYS_SETTINGS_SLIDER_SWIPE	BIT(7)
 #define IQS269_SYS_SETTINGS_RESEED_OFFSET	BIT(6)
 #define IQS269_SYS_SETTINGS_EVENT_MODE		BIT(5)
 #define IQS269_SYS_SETTINGS_EVENT_MODE_LP	BIT(4)
@@ -69,6 +73,7 @@
 #define IQS269_FILT_STR_MAX			3
 
 #define IQS269_EVENT_MASK_SYS			BIT(6)
+#define IQS269_EVENT_MASK_GESTURE		BIT(3)
 #define IQS269_EVENT_MASK_DEEP			BIT(2)
 #define IQS269_EVENT_MASK_TOUCH			BIT(1)
 #define IQS269_EVENT_MASK_PROX			BIT(0)
@@ -97,6 +102,15 @@
 #define IQS269_MISC_B_TRACKING_UI_ENABLE	BIT(4)
 #define IQS269_MISC_B_FILT_STR_SLIDER		GENMASK(1, 0)
 
+#define IQS269_TOUCH_HOLD_SLIDER_SEL		0x89
+#define IQS269_TOUCH_HOLD_DEFAULT		0x14
+#define IQS269_TOUCH_HOLD_MS_MIN		256
+#define IQS269_TOUCH_HOLD_MS_MAX		65280
+
+#define IQS269_TIMEOUT_TAP_MS_MAX		4080
+#define IQS269_TIMEOUT_SWIPE_MS_MAX		4080
+#define IQS269_THRESH_SWIPE_MAX			255
+
 #define IQS269_CHx_ENG_A_MEAS_CAP_SIZE		BIT(15)
 #define IQS269_CHx_ENG_A_RX_GND_INACTIVE	BIT(13)
 #define IQS269_CHx_ENG_A_LOCAL_CAP_SIZE		BIT(12)
@@ -142,6 +156,10 @@
 
 #define IQS269_MAX_REG				0xFF
 
+#define IQS269_OTP_OPTION_DEFAULT		0x00
+#define IQS269_OTP_OPTION_TWS			0xD0
+#define IQS269_OTP_OPTION_HOLD			BIT(7)
+
 #define IQS269_NUM_CH				8
 #define IQS269_NUM_SL				2
 
@@ -175,6 +193,20 @@ enum iqs269_event_id {
 	IQS269_EVENT_DEEP_UP,
 };
 
+enum iqs269_slider_id {
+	IQS269_SLIDER_NONE,
+	IQS269_SLIDER_KEY,
+	IQS269_SLIDER_RAW,
+};
+
+enum iqs269_gesture_id {
+	IQS269_GESTURE_TAP,
+	IQS269_GESTURE_HOLD,
+	IQS269_GESTURE_FLICK_POS,
+	IQS269_GESTURE_FLICK_NEG,
+	IQS269_NUM_GESTURES,
+};
+
 struct iqs269_switch_desc {
 	unsigned int code;
 	bool enabled;
@@ -234,7 +266,7 @@ struct iqs269_ver_info {
 	u8 prod_num;
 	u8 sw_num;
 	u8 hw_num;
-	u8 padding;
+	u8 fw_num;
 } __packed;
 
 struct iqs269_ch_reg {
@@ -285,16 +317,42 @@ struct iqs269_private {
 	struct regmap *regmap;
 	struct mutex lock;
 	struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)];
+	struct iqs269_ver_info ver_info;
 	struct iqs269_sys_reg sys_reg;
 	struct completion ati_done;
 	struct input_dev *keypad;
 	struct input_dev *slider[IQS269_NUM_SL];
 	unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
+	unsigned int sl_code[IQS269_NUM_SL][IQS269_NUM_GESTURES];
+	unsigned int otp_option;
 	unsigned int ch_num;
 	bool hall_enable;
 	bool ati_current;
 };
 
+static enum iqs269_slider_id iqs269_slider_type(struct iqs269_private *iqs269,
+						int slider_num)
+{
+	int i;
+
+	/*
+	 * Slider 1 is unavailable if the touch-and-hold option is enabled via
+	 * OTP. In that case, the channel selection register is repurposed for
+	 * the touch-and-hold timer ceiling.
+	 */
+	if (slider_num && (iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
+		return IQS269_SLIDER_NONE;
+
+	if (!iqs269->sys_reg.slider_select[slider_num])
+		return IQS269_SLIDER_NONE;
+
+	for (i = 0; i < IQS269_NUM_GESTURES; i++)
+		if (iqs269->sl_code[slider_num][i] != KEY_RESERVED)
+			return IQS269_SLIDER_KEY;
+
+	return IQS269_SLIDER_RAW;
+}
+
 static int iqs269_ati_mode_set(struct iqs269_private *iqs269,
 			       unsigned int ch_num, unsigned int mode)
 {
@@ -525,7 +583,8 @@ static int iqs269_parse_chan(struct iqs269_private *iqs269,
 	if (fwnode_property_present(ch_node, "azoteq,slider0-select"))
 		iqs269->sys_reg.slider_select[0] |= BIT(reg);
 
-	if (fwnode_property_present(ch_node, "azoteq,slider1-select"))
+	if (fwnode_property_present(ch_node, "azoteq,slider1-select") &&
+	    !(iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
 		iqs269->sys_reg.slider_select[1] |= BIT(reg);
 
 	ch_reg = &iqs269->sys_reg.ch_reg[reg];
@@ -950,7 +1009,43 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	sys_reg->blocking = 0;
 
 	sys_reg->slider_select[0] = 0;
-	sys_reg->slider_select[1] = 0;
+
+	/*
+	 * If configured via OTP to do so, the device asserts a pulse on the
+	 * GPIO4 pin for approximately 60 ms once a selected channel is held
+	 * in a state of touch for a configurable length of time.
+	 *
+	 * In that case, the register used for slider 1 channel selection is
+	 * repurposed for the touch-and-hold timer ceiling.
+	 */
+	if (iqs269->otp_option & IQS269_OTP_OPTION_HOLD) {
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,touch-hold-ms", &val)) {
+			if (val < IQS269_TOUCH_HOLD_MS_MIN ||
+			    val > IQS269_TOUCH_HOLD_MS_MAX) {
+				dev_err(&client->dev,
+					"Invalid touch-and-hold ceiling: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->slider_select[1] = val / 256;
+		} else if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+			/*
+			 * The default touch-and-hold timer ceiling initially
+			 * read from early revisions of silicon is invalid if
+			 * the device experienced a soft reset between power-
+			 * on and the read operation.
+			 *
+			 * To protect against this case, explicitly cache the
+			 * default value so that it is restored each time the
+			 * device is re-initialized.
+			 */
+			sys_reg->slider_select[1] = IQS269_TOUCH_HOLD_DEFAULT;
+		}
+	} else {
+		sys_reg->slider_select[1] = 0;
+	}
 
 	sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS);
 
@@ -1004,6 +1099,76 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 		general |= (val << IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT);
 	}
 
+	if (device_property_present(&client->dev, "linux,keycodes")) {
+		int scale = 1;
+		int count = device_property_count_u32(&client->dev,
+						      "linux,keycodes");
+		if (count > IQS269_NUM_GESTURES * IQS269_NUM_SL) {
+			dev_err(&client->dev, "Too many keycodes present\n");
+			return -EINVAL;
+		} else if (count < 0) {
+			dev_err(&client->dev, "Failed to count keycodes: %d\n",
+				count);
+			return count;
+		}
+
+		error = device_property_read_u32_array(&client->dev,
+						       "linux,keycodes",
+						       *iqs269->sl_code, count);
+		if (error) {
+			dev_err(&client->dev, "Failed to read keycodes: %d\n",
+				error);
+			return error;
+		}
+
+		if (device_property_present(&client->dev,
+					    "azoteq,gesture-swipe"))
+			general |= IQS269_SYS_SETTINGS_SLIDER_SWIPE;
+
+		/*
+		 * Early revisions of silicon use a more granular step size for
+		 * tap and swipe gesture timeouts; scale them appropriately.
+		 */
+		if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3)
+			scale = 4;
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,timeout-tap-ms", &val)) {
+			if (val > IQS269_TIMEOUT_TAP_MS_MAX / scale) {
+				dev_err(&client->dev, "Invalid timeout: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->timeout_tap = val / (16 / scale);
+		}
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,timeout-swipe-ms",
+					      &val)) {
+			if (val > IQS269_TIMEOUT_SWIPE_MS_MAX / scale) {
+				dev_err(&client->dev, "Invalid timeout: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->timeout_swipe = val / (16 / scale);
+		}
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,thresh-swipe", &val)) {
+			if (val > IQS269_THRESH_SWIPE_MAX) {
+				dev_err(&client->dev, "Invalid threshold: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->thresh_swipe = val;
+		}
+
+		sys_reg->event_mask &= ~IQS269_EVENT_MASK_GESTURE;
+	}
+
 	general &= ~IQS269_SYS_SETTINGS_RESEED_OFFSET;
 	if (device_property_present(&client->dev, "azoteq,reseed-offset"))
 		general |= IQS269_SYS_SETTINGS_RESEED_OFFSET;
@@ -1012,10 +1177,11 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 
 	/*
 	 * As per the datasheet, enable streaming during normal-power mode if
-	 * either slider is in use. In that case, the device returns to event
-	 * mode during low-power mode.
+	 * raw coordinates will be read from either slider. In that case, the
+	 * device returns to event mode during low-power mode.
 	 */
-	if (sys_reg->slider_select[0] || sys_reg->slider_select[1])
+	if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
+	    iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW)
 		general |= IQS269_SYS_SETTINGS_EVENT_MODE_LP;
 
 	general |= IQS269_SYS_SETTINGS_REDO_ATI;
@@ -1026,12 +1192,30 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	return 0;
 }
 
+static const struct reg_sequence iqs269_tws_init[] = {
+	{ IQS269_TOUCH_HOLD_SLIDER_SEL, IQS269_TOUCH_HOLD_DEFAULT },
+	{ 0xF0, 0x580F },
+	{ 0xF0, 0x59EF },
+};
+
 static int iqs269_dev_init(struct iqs269_private *iqs269)
 {
 	int error;
 
 	mutex_lock(&iqs269->lock);
 
+	/*
+	 * Early revisions of silicon require the following workaround in order
+	 * to restore any OTP-enabled functionality after a soft reset.
+	 */
+	if (iqs269->otp_option == IQS269_OTP_OPTION_TWS &&
+	    iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+		error = regmap_multi_reg_write(iqs269->regmap, iqs269_tws_init,
+					       ARRAY_SIZE(iqs269_tws_init));
+		if (error)
+			goto err_mutex;
+	}
+
 	error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI,
 				   IQS269_HALL_UI_ENABLE,
 				   iqs269->hall_enable ? ~0 : 0);
@@ -1106,19 +1290,37 @@ static int iqs269_input_init(struct iqs269_private *iqs269)
 	}
 
 	for (i = 0; i < IQS269_NUM_SL; i++) {
-		if (!iqs269->sys_reg.slider_select[i])
+		if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_NONE)
 			continue;
 
 		iqs269->slider[i] = devm_input_allocate_device(&client->dev);
 		if (!iqs269->slider[i])
 			return -ENOMEM;
 
+		iqs269->slider[i]->keycodemax = ARRAY_SIZE(iqs269->sl_code[i]);
+		iqs269->slider[i]->keycode = iqs269->sl_code[i];
+		iqs269->slider[i]->keycodesize = sizeof(**iqs269->sl_code);
+
 		iqs269->slider[i]->name = i ? "iqs269a_slider_1"
 					    : "iqs269a_slider_0";
 		iqs269->slider[i]->id.bustype = BUS_I2C;
 
-		input_set_capability(iqs269->slider[i], EV_KEY, BTN_TOUCH);
-		input_set_abs_params(iqs269->slider[i], ABS_X, 0, 255, 0, 0);
+		for (j = 0; j < IQS269_NUM_GESTURES; j++)
+			if (iqs269->sl_code[i][j] != KEY_RESERVED)
+				input_set_capability(iqs269->slider[i], EV_KEY,
+						     iqs269->sl_code[i][j]);
+
+		/*
+		 * Present the slider as a narrow trackpad if one or more chan-
+		 * nels have been selected to participate, but no gestures have
+		 * been mapped to a keycode.
+		 */
+		if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_RAW) {
+			input_set_capability(iqs269->slider[i],
+					     EV_KEY, BTN_TOUCH);
+			input_set_abs_params(iqs269->slider[i],
+					     ABS_X, 0, 255, 0, 0);
+		}
 
 		error = input_register_device(iqs269->slider[i]);
 		if (error) {
@@ -1167,28 +1369,62 @@ static int iqs269_report(struct iqs269_private *iqs269)
 	if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_IN_ATI)
 		return 0;
 
-	error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, slider_x,
-				sizeof(slider_x));
-	if (error) {
-		dev_err(&client->dev, "Failed to read slider position: %d\n",
-			error);
-		return error;
+	if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
+	    iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW) {
+		error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X,
+					slider_x, sizeof(slider_x));
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to read slider position: %d\n", error);
+			return error;
+		}
 	}
 
 	for (i = 0; i < IQS269_NUM_SL; i++) {
-		if (!iqs269->sys_reg.slider_select[i])
+		flags.gesture >>= (i * IQS269_NUM_GESTURES);
+
+		switch (iqs269_slider_type(iqs269, i)) {
+		case IQS269_SLIDER_NONE:
 			continue;
 
-		/*
-		 * Report BTN_TOUCH if any channel that participates in the
-		 * slider is in a state of touch.
-		 */
-		if (flags.states[IQS269_ST_OFFS_TOUCH] &
-		    iqs269->sys_reg.slider_select[i]) {
-			input_report_key(iqs269->slider[i], BTN_TOUCH, 1);
-			input_report_abs(iqs269->slider[i], ABS_X, slider_x[i]);
-		} else {
-			input_report_key(iqs269->slider[i], BTN_TOUCH, 0);
+		case IQS269_SLIDER_KEY:
+			for (j = 0; j < IQS269_NUM_GESTURES; j++)
+				input_report_key(iqs269->slider[i],
+						 iqs269->sl_code[i][j],
+						 flags.gesture & BIT(j));
+
+			if (!(flags.gesture & (BIT(IQS269_GESTURE_FLICK_NEG) |
+					       BIT(IQS269_GESTURE_FLICK_POS) |
+					       BIT(IQS269_GESTURE_TAP))))
+				break;
+
+			input_sync(iqs269->slider[i]);
+
+			/*
+			 * Momentary gestures are followed by a complementary
+			 * release cycle so as to emulate a full keystroke.
+			 */
+			for (j = 0; j < IQS269_NUM_GESTURES; j++)
+				if (j != IQS269_GESTURE_HOLD)
+					input_report_key(iqs269->slider[i],
+							 iqs269->sl_code[i][j],
+							 0);
+			break;
+
+		case IQS269_SLIDER_RAW:
+			/*
+			 * The slider is considered to be in a state of touch
+			 * if any selected channels are in a state of touch.
+			 */
+			state = flags.states[IQS269_ST_OFFS_TOUCH];
+			state &= iqs269->sys_reg.slider_select[i];
+
+			input_report_key(iqs269->slider[i], BTN_TOUCH, state);
+
+			if (state)
+				input_report_abs(iqs269->slider[i],
+						 ABS_X, slider_x[i]);
+			break;
 		}
 
 		input_sync(iqs269->slider[i]);
@@ -1286,7 +1522,7 @@ static ssize_t counts_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", le16_to_cpu(counts));
+	return sysfs_emit(buf, "%u\n", le16_to_cpu(counts));
 }
 
 static ssize_t hall_bin_show(struct device *dev,
@@ -1324,7 +1560,7 @@ static ssize_t hall_bin_show(struct device *dev,
 		return -EINVAL;
 	}
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t hall_enable_show(struct device *dev,
@@ -1332,7 +1568,7 @@ static ssize_t hall_enable_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->hall_enable);
+	return sysfs_emit(buf, "%u\n", iqs269->hall_enable);
 }
 
 static ssize_t hall_enable_store(struct device *dev,
@@ -1362,7 +1598,7 @@ static ssize_t ch_number_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ch_num);
+	return sysfs_emit(buf, "%u\n", iqs269->ch_num);
 }
 
 static ssize_t ch_number_store(struct device *dev,
@@ -1391,8 +1627,7 @@ static ssize_t rx_enable_show(struct device *dev,
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 	struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n",
-			 ch_reg[iqs269->ch_num].rx_enable);
+	return sysfs_emit(buf, "%u\n", ch_reg[iqs269->ch_num].rx_enable);
 }
 
 static ssize_t rx_enable_store(struct device *dev,
@@ -1432,7 +1667,7 @@ static ssize_t ati_mode_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_mode_store(struct device *dev,
@@ -1465,7 +1700,7 @@ static ssize_t ati_base_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_base_store(struct device *dev,
@@ -1498,7 +1733,7 @@ static ssize_t ati_target_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_target_store(struct device *dev,
@@ -1525,9 +1760,9 @@ static ssize_t ati_trigger_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n",
-			 iqs269->ati_current &&
-			 completion_done(&iqs269->ati_done));
+	return sysfs_emit(buf, "%u\n",
+			  iqs269->ati_current &&
+			  completion_done(&iqs269->ati_done));
 }
 
 static ssize_t ati_trigger_store(struct device *dev,
@@ -1596,7 +1831,6 @@ static const struct regmap_config iqs269_regmap_config = {
 
 static int iqs269_probe(struct i2c_client *client)
 {
-	struct iqs269_ver_info ver_info;
 	struct iqs269_private *iqs269;
 	int error;
 
@@ -1618,14 +1852,16 @@ static int iqs269_probe(struct i2c_client *client)
 	mutex_init(&iqs269->lock);
 	init_completion(&iqs269->ati_done);
 
-	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, &ver_info,
-				sizeof(ver_info));
+	iqs269->otp_option = (uintptr_t)device_get_match_data(&client->dev);
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO,
+				&iqs269->ver_info, sizeof(iqs269->ver_info));
 	if (error)
 		return error;
 
-	if (ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
+	if (iqs269->ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
 		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
-			ver_info.prod_num);
+			iqs269->ver_info.prod_num);
 		return -EINVAL;
 	}
 
@@ -1728,7 +1964,18 @@ static int iqs269_resume(struct device *dev)
 static DEFINE_SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume);
 
 static const struct of_device_id iqs269_of_match[] = {
-	{ .compatible = "azoteq,iqs269a" },
+	{
+		.compatible = "azoteq,iqs269a",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-00",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-d0",
+		.data = (void *)IQS269_OTP_OPTION_TWS,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, iqs269_of_match);
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
index 80f4416ffe..0e646f1b25 100644
--- a/drivers/input/misc/max77693-haptic.c
+++ b/drivers/input/misc/max77693-haptic.c
@@ -307,7 +307,7 @@ static int max77693_haptic_probe(struct platform_device *pdev)
 	haptic->suspend_state = false;
 
 	/* Variant-specific init */
-	haptic->dev_type = platform_get_device_id(pdev)->driver_data;
+	haptic->dev_type = max77693->type;
 	switch (haptic->dev_type) {
 	case TYPE_MAX77693:
 		haptic->regmap_haptic = max77693->regmap_haptic;
@@ -406,16 +406,24 @@ static DEFINE_SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
 				max77693_haptic_resume);
 
 static const struct platform_device_id max77693_haptic_id[] = {
-	{ "max77693-haptic", TYPE_MAX77693 },
-	{ "max77843-haptic", TYPE_MAX77843 },
+	{ "max77693-haptic", },
+	{ "max77843-haptic", },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
 
+static const struct of_device_id of_max77693_haptic_dt_match[] = {
+	{ .compatible = "maxim,max77693-haptic", },
+	{ .compatible = "maxim,max77843-haptic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_max77693_haptic_dt_match);
+
 static struct platform_driver max77693_haptic_driver = {
 	.driver		= {
 		.name	= "max77693-haptic",
 		.pm	= pm_sleep_ptr(&max77693_haptic_pm_ops),
+		.of_match_table = of_max77693_haptic_dt_match,
 	},
 	.probe		= max77693_haptic_probe,
 	.id_table	= max77693_haptic_id,
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 1e731d8397..5b9aedf436 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -39,7 +39,7 @@ static int pwm_beeper_on(struct pwm_beeper *beeper, unsigned long period)
 	state.period = period;
 	pwm_set_relative_duty_cycle(&state, 50, 100);
 
-	error = pwm_apply_state(beeper->pwm, &state);
+	error = pwm_apply_might_sleep(beeper->pwm, &state);
 	if (error)
 		return error;
 
@@ -138,7 +138,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
 	/* Sync up PWM state and ensure it is off. */
 	pwm_init_state(beeper->pwm, &state);
 	state.enabled = false;
-	error = pwm_apply_state(beeper->pwm, &state);
+	error = pwm_apply_might_sleep(beeper->pwm, &state);
 	if (error) {
 		dev_err(dev, "failed to apply initial PWM state: %d\n",
 			error);
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index acac79c488..3e5ed685ed 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -56,7 +56,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 	pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
 	state.enabled = true;
 
-	err = pwm_apply_state(vibrator->pwm, &state);
+	err = pwm_apply_might_sleep(vibrator->pwm, &state);
 	if (err) {
 		dev_err(pdev, "failed to apply pwm state: %d\n", err);
 		return err;
@@ -67,7 +67,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 		state.duty_cycle = vibrator->direction_duty_cycle;
 		state.enabled = true;
 
-		err = pwm_apply_state(vibrator->pwm_dir, &state);
+		err = pwm_apply_might_sleep(vibrator->pwm_dir, &state);
 		if (err) {
 			dev_err(pdev, "failed to apply dir-pwm state: %d\n", err);
 			pwm_disable(vibrator->pwm);
@@ -160,7 +160,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
 	/* Sync up PWM state and ensure it is off. */
 	pwm_init_state(vibrator->pwm, &state);
 	state.enabled = false;
-	err = pwm_apply_state(vibrator->pwm, &state);
+	err = pwm_apply_might_sleep(vibrator->pwm, &state);
 	if (err) {
 		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 			err);
@@ -174,7 +174,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
 		/* Sync up PWM state and ensure it is off. */
 		pwm_init_state(vibrator->pwm_dir, &state);
 		state.enabled = false;
-		err = pwm_apply_state(vibrator->pwm_dir, &state);
+		err = pwm_apply_might_sleep(vibrator->pwm_dir, &state);
 		if (err) {
 			dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 				err);