Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 487 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
new file mode 100644
index 0000000000..4c0d99aae9
--- /dev/null
+++ b/drivers/input/touchscreen/exc3000.c
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for I2C connected EETI EXC3000 multiple touch controller
+ *
+ * Copyright (C) 2017 Ahmet Inan <inan@distec.de>
+ *
+ * minimal implementation based on egalax_ts.c and egalax_i2c.c
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sizes.h>
+#include <linux/timer.h>
+#include <asm/unaligned.h>
+
+#define EXC3000_NUM_SLOTS		10
+#define EXC3000_SLOTS_PER_FRAME		5
+#define EXC3000_LEN_FRAME		66
+#define EXC3000_LEN_VENDOR_REQUEST	68
+#define EXC3000_LEN_POINT		10
+
+#define EXC3000_LEN_MODEL_NAME		16
+#define EXC3000_LEN_FW_VERSION		16
+
+#define EXC3000_VENDOR_EVENT		0x03
+#define EXC3000_MT1_EVENT		0x06
+#define EXC3000_MT2_EVENT		0x18
+
+#define EXC3000_TIMEOUT_MS		100
+
+#define EXC3000_RESET_MS		10
+#define EXC3000_READY_MS		100
+
+static const struct i2c_device_id exc3000_id[];
+
+struct eeti_dev_info {
+	const char *name;
+	int max_xy;
+};
+
+enum eeti_dev_id {
+	EETI_EXC3000,
+	EETI_EXC80H60,
+	EETI_EXC80H84,
+};
+
+static struct eeti_dev_info exc3000_info[] = {
+	[EETI_EXC3000] = {
+		.name = "EETI EXC3000 Touch Screen",
+		.max_xy = SZ_4K - 1,
+	},
+	[EETI_EXC80H60] = {
+		.name = "EETI EXC80H60 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+	[EETI_EXC80H84] = {
+		.name = "EETI EXC80H84 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+};
+
+struct exc3000_data {
+	struct i2c_client *client;
+	const struct eeti_dev_info *info;
+	struct input_dev *input;
+	struct touchscreen_properties prop;
+	struct gpio_desc *reset;
+	struct timer_list timer;
+	u8 buf[2 * EXC3000_LEN_FRAME];
+	struct completion wait_event;
+	struct mutex query_lock;
+};
+
+static void exc3000_report_slots(struct input_dev *input,
+				 struct touchscreen_properties *prop,
+				 const u8 *buf, int num)
+{
+	for (; num--; buf += EXC3000_LEN_POINT) {
+		if (buf[0] & BIT(0)) {
+			input_mt_slot(input, buf[1]);
+			input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+			touchscreen_report_pos(input, prop,
+					       get_unaligned_le16(buf + 2),
+					       get_unaligned_le16(buf + 4),
+					       true);
+		}
+	}
+}
+
+static void exc3000_timer(struct timer_list *t)
+{
+	struct exc3000_data *data = from_timer(data, t, timer);
+
+	input_mt_sync_frame(data->input);
+	input_sync(data->input);
+}
+
+static inline void exc3000_schedule_timer(struct exc3000_data *data)
+{
+	mod_timer(&data->timer, jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS));
+}
+
+static void exc3000_shutdown_timer(void *timer)
+{
+	timer_shutdown_sync(timer);
+}
+
+static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = i2c_master_send(client, "'", 2);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 2)
+		return -EIO;
+
+	ret = i2c_master_recv(client, buf, EXC3000_LEN_FRAME);
+	if (ret < 0)
+		return ret;
+
+	if (ret != EXC3000_LEN_FRAME)
+		return -EIO;
+
+	if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int exc3000_handle_mt_event(struct exc3000_data *data)
+{
+	struct input_dev *input = data->input;
+	int ret, total_slots;
+	u8 *buf = data->buf;
+
+	total_slots = buf[3];
+	if (!total_slots || total_slots > EXC3000_NUM_SLOTS) {
+		ret = -EINVAL;
+		goto out_fail;
+	}
+
+	if (total_slots > EXC3000_SLOTS_PER_FRAME) {
+		/* Read 2nd frame to get the rest of the contacts. */
+		ret = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME);
+		if (ret)
+			goto out_fail;
+
+		/* 2nd chunk must have number of contacts set to 0. */
+		if (buf[EXC3000_LEN_FRAME + 3] != 0) {
+			ret = -EINVAL;
+			goto out_fail;
+		}
+	}
+
+	/*
+	 * We read full state successfully, no contacts will be "stuck".
+	 */
+	del_timer_sync(&data->timer);
+
+	while (total_slots > 0) {
+		int slots = min(total_slots, EXC3000_SLOTS_PER_FRAME);
+
+		exc3000_report_slots(input, &data->prop, buf + 4, slots);
+		total_slots -= slots;
+		buf += EXC3000_LEN_FRAME;
+	}
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+
+	return 0;
+
+out_fail:
+	/* Schedule a timer to release "stuck" contacts */
+	exc3000_schedule_timer(data);
+
+	return ret;
+}
+
+static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
+{
+	struct exc3000_data *data = dev_id;
+	u8 *buf = data->buf;
+	int ret;
+
+	ret = exc3000_read_frame(data, buf);
+	if (ret) {
+		/* Schedule a timer to release "stuck" contacts */
+		exc3000_schedule_timer(data);
+		goto out;
+	}
+
+	switch (buf[2]) {
+	case EXC3000_VENDOR_EVENT:
+		complete(&data->wait_event);
+		break;
+
+	case EXC3000_MT1_EVENT:
+	case EXC3000_MT2_EVENT:
+		exc3000_handle_mt_event(data);
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int exc3000_vendor_data_request(struct exc3000_data *data, u8 *request,
+				       u8 request_len, u8 *response, int timeout)
+{
+	u8 buf[EXC3000_LEN_VENDOR_REQUEST] = { 0x67, 0x00, 0x42, 0x00, 0x03 };
+	int ret;
+	unsigned long time_left;
+
+	mutex_lock(&data->query_lock);
+
+	reinit_completion(&data->wait_event);
+
+	buf[5] = request_len;
+	memcpy(&buf[6], request, request_len);
+
+	ret = i2c_master_send(data->client, buf, EXC3000_LEN_VENDOR_REQUEST);
+	if (ret < 0)
+		goto out_unlock;
+
+	if (response) {
+		time_left = wait_for_completion_timeout(&data->wait_event,
+							timeout * HZ);
+		if (time_left == 0) {
+			ret = -ETIMEDOUT;
+			goto out_unlock;
+		}
+
+		if (data->buf[3] >= EXC3000_LEN_FRAME) {
+			ret = -ENOSPC;
+			goto out_unlock;
+		}
+
+		memcpy(response, &data->buf[4], data->buf[3]);
+		ret = data->buf[3];
+	}
+
+out_unlock:
+	mutex_unlock(&data->query_lock);
+
+	return ret;
+}
+
+static ssize_t fw_version_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct exc3000_data *data = i2c_get_clientdata(client);
+	u8 response[EXC3000_LEN_FRAME];
+	int ret;
+
+	/* query bootloader info */
+	ret = exc3000_vendor_data_request(data,
+					  (u8[]){0x39, 0x02}, 2, response, 1);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If the bootloader version is non-zero then the device is in
+	 * bootloader mode and won't answer a query for the application FW
+	 * version, so we just use the bootloader version info.
+	 */
+	if (response[2] || response[3])
+		return sprintf(buf, "%d.%d\n", response[2], response[3]);
+
+	ret = exc3000_vendor_data_request(data, (u8[]){'D'}, 1, response, 1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", &response[1]);
+}
+static DEVICE_ATTR_RO(fw_version);
+
+static ssize_t model_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct exc3000_data *data = i2c_get_clientdata(client);
+	u8 response[EXC3000_LEN_FRAME];
+	int ret;
+
+	ret = exc3000_vendor_data_request(data, (u8[]){'E'}, 1, response, 1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", &response[1]);
+}
+static DEVICE_ATTR_RO(model);
+
+static ssize_t type_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct exc3000_data *data = i2c_get_clientdata(client);
+	u8 response[EXC3000_LEN_FRAME];
+	int ret;
+
+	ret = exc3000_vendor_data_request(data, (u8[]){'F'}, 1, response, 1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", &response[1]);
+}
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *sysfs_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_model.attr,
+	&dev_attr_type.attr,
+	NULL
+};
+
+static struct attribute_group exc3000_attribute_group = {
+	.attrs = sysfs_attrs
+};
+
+static int exc3000_probe(struct i2c_client *client)
+{
+	struct exc3000_data *data;
+	struct input_dev *input;
+	int error, max_xy, retry;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	data->info = device_get_match_data(&client->dev);
+	if (!data->info) {
+		enum eeti_dev_id eeti_dev_id =
+			i2c_match_id(exc3000_id, client)->driver_data;
+		data->info = &exc3000_info[eeti_dev_id];
+	}
+	timer_setup(&data->timer, exc3000_timer, 0);
+	init_completion(&data->wait_event);
+	mutex_init(&data->query_lock);
+
+	data->reset = devm_gpiod_get_optional(&client->dev, "reset",
+					      GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset))
+		return PTR_ERR(data->reset);
+
+	/* For proper reset sequence, enable power while reset asserted */
+	error = devm_regulator_get_enable(&client->dev, "vdd");
+	if (error && error != -ENODEV)
+		return dev_err_probe(&client->dev, error,
+				     "failed to request vdd regulator\n");
+
+	if (data->reset) {
+		msleep(EXC3000_RESET_MS);
+		gpiod_set_value_cansleep(data->reset, 0);
+		msleep(EXC3000_READY_MS);
+	}
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input)
+		return -ENOMEM;
+
+	data->input = input;
+	input_set_drvdata(input, data);
+
+	input->name = data->info->name;
+	input->id.bustype = BUS_I2C;
+
+	max_xy = data->info->max_xy;
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0);
+
+	touchscreen_parse_properties(input, true, &data->prop);
+
+	error = input_mt_init_slots(input, EXC3000_NUM_SLOTS,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	error = devm_add_action_or_reset(&client->dev, exc3000_shutdown_timer,
+					 &data->timer);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, exc3000_interrupt, IRQF_ONESHOT,
+					  client->name, data);
+	if (error)
+		return error;
+
+	/*
+	 * I²C does not have built-in recovery, so retry on failure. This
+	 * ensures, that the device probe will not fail for temporary issues
+	 * on the bus.  This is not needed for the sysfs calls (userspace
+	 * will receive the error code and can start another query) and
+	 * cannot be done for touch events (but that only means loosing one
+	 * or two touch events anyways).
+	 */
+	for (retry = 0; retry < 3; retry++) {
+		u8 response[EXC3000_LEN_FRAME];
+
+		error = exc3000_vendor_data_request(data, (u8[]){'E'}, 1,
+						    response, 1);
+		if (error > 0) {
+			dev_dbg(&client->dev, "TS Model: %s", &response[1]);
+			error = 0;
+			break;
+		}
+		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
+			 retry + 1, error);
+	}
+
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+
+	error = devm_device_add_group(&client->dev, &exc3000_attribute_group);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct i2c_device_id exc3000_id[] = {
+	{ "exc3000", EETI_EXC3000 },
+	{ "exc80h60", EETI_EXC80H60 },
+	{ "exc80h84", EETI_EXC80H84 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, exc3000_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id exc3000_of_match[] = {
+	{ .compatible = "eeti,exc3000", .data = &exc3000_info[EETI_EXC3000] },
+	{ .compatible = "eeti,exc80h60", .data = &exc3000_info[EETI_EXC80H60] },
+	{ .compatible = "eeti,exc80h84", .data = &exc3000_info[EETI_EXC80H84] },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, exc3000_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id exc3000_acpi_match[] = {
+	{ "EGA00001", .driver_data = (kernel_ulong_t)&exc3000_info[EETI_EXC80H60] },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, exc3000_acpi_match);
+#endif
+
+static struct i2c_driver exc3000_driver = {
+	.driver = {
+		.name	= "exc3000",
+		.of_match_table = of_match_ptr(exc3000_of_match),
+		.acpi_match_table = ACPI_PTR(exc3000_acpi_match),
+	},
+	.id_table	= exc3000_id,
+	.probe		= exc3000_probe,
+};
+
+module_i2c_driver(exc3000_driver);
+
+MODULE_AUTHOR("Ahmet Inan <inan@distec.de>");
+MODULE_DESCRIPTION("I2C connected EETI EXC3000 multiple touch controller driver");
+MODULE_LICENSE("GPL v2");