Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 288 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
new file mode 100644
index 0000000000..ac28019ba4
--- /dev/null
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/platform_data/mcs.h>
+#include <linux/slab.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS		0x00
+#define STATUS_OFFSET			0
+#define STATUS_NO			(0 << STATUS_OFFSET)
+#define STATUS_INIT			(1 << STATUS_OFFSET)
+#define STATUS_SENSING			(2 << STATUS_OFFSET)
+#define STATUS_COORD			(3 << STATUS_OFFSET)
+#define STATUS_GESTURE			(4 << STATUS_OFFSET)
+#define ERROR_OFFSET			4
+#define ERROR_NO			(0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET		(1 << ERROR_OFFSET)
+#define ERROR_INT_RESET			(2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET			(3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS	(8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE		(9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE		0x01
+#define RESET_OFFSET			0
+#define RESET_NO			(0 << RESET_OFFSET)
+#define RESET_EXT_SOFT			(1 << RESET_OFFSET)
+#define OP_MODE_OFFSET			1
+#define OP_MODE_SLEEP			(0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE			(1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET			4
+#define GESTURE_DISABLE			(0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE			(1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET		5
+#define PROXIMITY_DISABLE		(0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE		(1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET		6
+#define SCAN_MODE_INTERRUPT		(0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING		(1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET		7
+#define REPORT_RATE_40			(0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80			(1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL		0x02
+#define MCS5000_TS_FILTER_CTL		0x03
+#define PRI_FILTER_OFFSET		0
+#define SEC_FILTER_OFFSET		4
+
+#define MCS5000_TS_X_SIZE_UPPER		0x08
+#define MCS5000_TS_X_SIZE_LOWER		0x09
+#define MCS5000_TS_Y_SIZE_UPPER		0x0A
+#define MCS5000_TS_Y_SIZE_LOWER		0x0B
+
+#define MCS5000_TS_INPUT_INFO		0x10
+#define INPUT_TYPE_OFFSET		0
+#define INPUT_TYPE_NONTOUCH		(0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE		(1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL			(2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM			(3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY		(7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET		3
+#define GESTURE_CODE_NO			(0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER		0x11
+#define MCS5000_TS_X_POS_LOWER		0x12
+#define MCS5000_TS_Y_POS_UPPER		0x13
+#define MCS5000_TS_Y_POS_LOWER		0x14
+#define MCS5000_TS_Z_POS		0x15
+#define MCS5000_TS_WIDTH		0x16
+#define MCS5000_TS_GESTURE_VAL		0x17
+#define MCS5000_TS_MODULE_REV		0x20
+#define MCS5000_TS_FIRMWARE_VER		0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC			0x3ff
+#define MCS5000_MAX_YC			0x3ff
+
+enum mcs5000_ts_read_offset {
+	READ_INPUT_INFO,
+	READ_X_POS_UPPER,
+	READ_X_POS_LOWER,
+	READ_Y_POS_UPPER,
+	READ_Y_POS_LOWER,
+	READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct mcs_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+	struct mcs5000_ts_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	u8 buffer[READ_BLOCK_SIZE];
+	int err;
+	int x;
+	int y;
+
+	err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+			READ_BLOCK_SIZE, buffer);
+	if (err < 0) {
+		dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+		goto out;
+	}
+
+	switch (buffer[READ_INPUT_INFO]) {
+	case INPUT_TYPE_NONTOUCH:
+		input_report_key(data->input_dev, BTN_TOUCH, 0);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_SINGLE:
+		x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+		y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+		input_report_key(data->input_dev, BTN_TOUCH, 1);
+		input_report_abs(data->input_dev, ABS_X, x);
+		input_report_abs(data->input_dev, ABS_Y, y);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_DUAL:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PALM:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PROXIMITY:
+		/* TODO */
+		break;
+
+	default:
+		dev_err(&client->dev, "Unknown ts input type %d\n",
+				buffer[READ_INPUT_INFO]);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data,
+				 const struct mcs_platform_data *platform_data)
+{
+	struct i2c_client *client = data->client;
+
+	/* Touch reset & sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+			RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+	/* Touch size */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+			platform_data->x_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+			platform_data->x_size & 0xff);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+			platform_data->y_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+			platform_data->y_size & 0xff);
+
+	/* Touch active mode & 80 report rate */
+	i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+			OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int mcs5000_ts_probe(struct i2c_client *client)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs5000_ts_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	data->client = client;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "MELFAS MCS-5000 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+	data->input_dev = input_dev;
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, mcs5000_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "mcs5000_ts", data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		return error;
+	}
+
+	mcs5000_ts_phys_init(data, pdata);
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static int mcs5000_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	/* Touch sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+	return 0;
+}
+
+static int mcs5000_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+	const struct mcs_platform_data *pdata = dev_get_platdata(dev);
+
+	mcs5000_ts_phys_init(data, pdata);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(mcs5000_ts_pm,
+				mcs5000_ts_suspend, mcs5000_ts_resume);
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+	{ "mcs5000_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+	.probe		= mcs5000_ts_probe,
+	.driver = {
+		.name = "mcs5000_ts",
+		.pm   = pm_sleep_ptr(&mcs5000_ts_pm),
+	},
+	.id_table	= mcs5000_ts_id,
+};
+
+module_i2c_driver(mcs5000_ts_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");