Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 499 insertions, 0 deletions

diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
new file mode 100644
index 0000000000..b0a0be77bb
--- /dev/null
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for ISSI IS31FL32xx family of I2C LED controllers
+ *
+ * Copyright 2015 Allworx Corp.
+ *
+ * Datasheets:
+ *   http://www.issi.com/US/product-analog-fxled-driver.shtml
+ *   http://www.si-en.com/product.asp?parentid=890
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+/* Used to indicate a device has no such register */
+#define IS31FL32XX_REG_NONE 0xFF
+
+/* Software Shutdown bit in Shutdown Register */
+#define IS31FL32XX_SHUTDOWN_SSD_ENABLE  0
+#define IS31FL32XX_SHUTDOWN_SSD_DISABLE BIT(0)
+
+/* IS31FL3216 has a number of unique registers */
+#define IS31FL3216_CONFIG_REG 0x00
+#define IS31FL3216_LIGHTING_EFFECT_REG 0x03
+#define IS31FL3216_CHANNEL_CONFIG_REG 0x04
+
+/* Software Shutdown bit in 3216 Config Register */
+#define IS31FL3216_CONFIG_SSD_ENABLE  BIT(7)
+#define IS31FL3216_CONFIG_SSD_DISABLE 0
+
+struct is31fl32xx_priv;
+struct is31fl32xx_led_data {
+	struct led_classdev cdev;
+	u8 channel; /* 1-based, max priv->cdef->channels */
+	struct is31fl32xx_priv *priv;
+};
+
+struct is31fl32xx_priv {
+	const struct is31fl32xx_chipdef *cdef;
+	struct i2c_client *client;
+	unsigned int num_leds;
+	struct is31fl32xx_led_data leds[];
+};
+
+/**
+ * struct is31fl32xx_chipdef - chip-specific attributes
+ * @channels            : Number of LED channels
+ * @shutdown_reg        : address of Shutdown register (optional)
+ * @pwm_update_reg      : address of PWM Update register
+ * @global_control_reg  : address of Global Control register (optional)
+ * @reset_reg           : address of Reset register (optional)
+ * @pwm_register_base   : address of first PWM register
+ * @pwm_registers_reversed: : true if PWM registers count down instead of up
+ * @led_control_register_base : address of first LED control register (optional)
+ * @enable_bits_per_led_control_register: number of LEDs enable bits in each
+ * @reset_func          : pointer to reset function
+ * @sw_shutdown_func    : pointer to software shutdown function
+ *
+ * For all optional register addresses, the sentinel value %IS31FL32XX_REG_NONE
+ * indicates that this chip has no such register.
+ *
+ * If non-NULL, @reset_func will be called during probing to set all
+ * necessary registers to a known initialization state. This is needed
+ * for chips that do not have a @reset_reg.
+ *
+ * @enable_bits_per_led_control_register must be >=1 if
+ * @led_control_register_base != %IS31FL32XX_REG_NONE.
+ */
+struct is31fl32xx_chipdef {
+	u8	channels;
+	u8	shutdown_reg;
+	u8	pwm_update_reg;
+	u8	global_control_reg;
+	u8	reset_reg;
+	u8	pwm_register_base;
+	bool	pwm_registers_reversed;
+	u8	led_control_register_base;
+	u8	enable_bits_per_led_control_register;
+	int (*reset_func)(struct is31fl32xx_priv *priv);
+	int (*sw_shutdown_func)(struct is31fl32xx_priv *priv, bool enable);
+};
+
+static const struct is31fl32xx_chipdef is31fl3236_cdef = {
+	.channels				= 36,
+	.shutdown_reg				= 0x00,
+	.pwm_update_reg				= 0x25,
+	.global_control_reg			= 0x4a,
+	.reset_reg				= 0x4f,
+	.pwm_register_base			= 0x01,
+	.led_control_register_base		= 0x26,
+	.enable_bits_per_led_control_register	= 1,
+};
+
+static const struct is31fl32xx_chipdef is31fl3235_cdef = {
+	.channels				= 28,
+	.shutdown_reg				= 0x00,
+	.pwm_update_reg				= 0x25,
+	.global_control_reg			= 0x4a,
+	.reset_reg				= 0x4f,
+	.pwm_register_base			= 0x05,
+	.led_control_register_base		= 0x2a,
+	.enable_bits_per_led_control_register	= 1,
+};
+
+static const struct is31fl32xx_chipdef is31fl3218_cdef = {
+	.channels				= 18,
+	.shutdown_reg				= 0x00,
+	.pwm_update_reg				= 0x16,
+	.global_control_reg			= IS31FL32XX_REG_NONE,
+	.reset_reg				= 0x17,
+	.pwm_register_base			= 0x01,
+	.led_control_register_base		= 0x13,
+	.enable_bits_per_led_control_register	= 6,
+};
+
+static int is31fl3216_reset(struct is31fl32xx_priv *priv);
+static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
+					bool enable);
+static const struct is31fl32xx_chipdef is31fl3216_cdef = {
+	.channels				= 16,
+	.shutdown_reg				= IS31FL32XX_REG_NONE,
+	.pwm_update_reg				= 0xB0,
+	.global_control_reg			= IS31FL32XX_REG_NONE,
+	.reset_reg				= IS31FL32XX_REG_NONE,
+	.pwm_register_base			= 0x10,
+	.pwm_registers_reversed			= true,
+	.led_control_register_base		= 0x01,
+	.enable_bits_per_led_control_register	= 8,
+	.reset_func				= is31fl3216_reset,
+	.sw_shutdown_func			= is31fl3216_software_shutdown,
+};
+
+static int is31fl32xx_write(struct is31fl32xx_priv *priv, u8 reg, u8 val)
+{
+	int ret;
+
+	dev_dbg(&priv->client->dev, "writing register 0x%02X=0x%02X", reg, val);
+
+	ret =  i2c_smbus_write_byte_data(priv->client, reg, val);
+	if (ret) {
+		dev_err(&priv->client->dev,
+			"register write to 0x%02X failed (error %d)",
+			reg, ret);
+	}
+	return ret;
+}
+
+/*
+ * Custom reset function for IS31FL3216 because it does not have a RESET
+ * register the way that the other IS31FL32xx chips do. We don't bother
+ * writing the GPIO and animation registers, because the registers we
+ * do write ensure those will have no effect.
+ */
+static int is31fl3216_reset(struct is31fl32xx_priv *priv)
+{
+	unsigned int i;
+	int ret;
+
+	ret = is31fl32xx_write(priv, IS31FL3216_CONFIG_REG,
+			       IS31FL3216_CONFIG_SSD_ENABLE);
+	if (ret)
+		return ret;
+	for (i = 0; i < priv->cdef->channels; i++) {
+		ret = is31fl32xx_write(priv, priv->cdef->pwm_register_base+i,
+				       0x00);
+		if (ret)
+			return ret;
+	}
+	ret = is31fl32xx_write(priv, priv->cdef->pwm_update_reg, 0);
+	if (ret)
+		return ret;
+	ret = is31fl32xx_write(priv, IS31FL3216_LIGHTING_EFFECT_REG, 0x00);
+	if (ret)
+		return ret;
+	ret = is31fl32xx_write(priv, IS31FL3216_CHANNEL_CONFIG_REG, 0x00);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Custom Software-Shutdown function for IS31FL3216 because it does not have
+ * a SHUTDOWN register the way that the other IS31FL32xx chips do.
+ * We don't bother doing a read/modify/write on the CONFIG register because
+ * we only ever use a value of '0' for the other fields in that register.
+ */
+static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
+					bool enable)
+{
+	u8 value = enable ? IS31FL3216_CONFIG_SSD_ENABLE :
+			    IS31FL3216_CONFIG_SSD_DISABLE;
+
+	return is31fl32xx_write(priv, IS31FL3216_CONFIG_REG, value);
+}
+
+/*
+ * NOTE: A mutex is not needed in this function because:
+ * - All referenced data is read-only after probe()
+ * - The I2C core has a mutex on to protect the bus
+ * - There are no read/modify/write operations
+ * - Intervening operations between the write of the PWM register
+ *   and the Update register are harmless.
+ *
+ * Example:
+ *	PWM_REG_1 write 16
+ *	UPDATE_REG write 0
+ *	PWM_REG_2 write 128
+ *	UPDATE_REG write 0
+ *   vs:
+ *	PWM_REG_1 write 16
+ *	PWM_REG_2 write 128
+ *	UPDATE_REG write 0
+ *	UPDATE_REG write 0
+ * are equivalent. Poking the Update register merely applies all PWM
+ * register writes up to that point.
+ */
+static int is31fl32xx_brightness_set(struct led_classdev *led_cdev,
+				     enum led_brightness brightness)
+{
+	const struct is31fl32xx_led_data *led_data =
+		container_of(led_cdev, struct is31fl32xx_led_data, cdev);
+	const struct is31fl32xx_chipdef *cdef = led_data->priv->cdef;
+	u8 pwm_register_offset;
+	int ret;
+
+	dev_dbg(led_cdev->dev, "%s: %d\n", __func__, brightness);
+
+	/* NOTE: led_data->channel is 1-based */
+	if (cdef->pwm_registers_reversed)
+		pwm_register_offset = cdef->channels - led_data->channel;
+	else
+		pwm_register_offset = led_data->channel - 1;
+
+	ret = is31fl32xx_write(led_data->priv,
+			       cdef->pwm_register_base + pwm_register_offset,
+			       brightness);
+	if (ret)
+		return ret;
+
+	return is31fl32xx_write(led_data->priv, cdef->pwm_update_reg, 0);
+}
+
+static int is31fl32xx_reset_regs(struct is31fl32xx_priv *priv)
+{
+	const struct is31fl32xx_chipdef *cdef = priv->cdef;
+	int ret;
+
+	if (cdef->reset_reg != IS31FL32XX_REG_NONE) {
+		ret = is31fl32xx_write(priv, cdef->reset_reg, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (cdef->reset_func)
+		return cdef->reset_func(priv);
+
+	return 0;
+}
+
+static int is31fl32xx_software_shutdown(struct is31fl32xx_priv *priv,
+					bool enable)
+{
+	const struct is31fl32xx_chipdef *cdef = priv->cdef;
+	int ret;
+
+	if (cdef->shutdown_reg != IS31FL32XX_REG_NONE) {
+		u8 value = enable ? IS31FL32XX_SHUTDOWN_SSD_ENABLE :
+				    IS31FL32XX_SHUTDOWN_SSD_DISABLE;
+		ret = is31fl32xx_write(priv, cdef->shutdown_reg, value);
+		if (ret)
+			return ret;
+	}
+
+	if (cdef->sw_shutdown_func)
+		return cdef->sw_shutdown_func(priv, enable);
+
+	return 0;
+}
+
+static int is31fl32xx_init_regs(struct is31fl32xx_priv *priv)
+{
+	const struct is31fl32xx_chipdef *cdef = priv->cdef;
+	int ret;
+
+	ret = is31fl32xx_reset_regs(priv);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set enable bit for all channels.
+	 * We will control state with PWM registers alone.
+	 */
+	if (cdef->led_control_register_base != IS31FL32XX_REG_NONE) {
+		u8 value =
+		    GENMASK(cdef->enable_bits_per_led_control_register-1, 0);
+		u8 num_regs = cdef->channels /
+				cdef->enable_bits_per_led_control_register;
+		int i;
+
+		for (i = 0; i < num_regs; i++) {
+			ret = is31fl32xx_write(priv,
+					       cdef->led_control_register_base+i,
+					       value);
+			if (ret)
+				return ret;
+		}
+	}
+
+	ret = is31fl32xx_software_shutdown(priv, false);
+	if (ret)
+		return ret;
+
+	if (cdef->global_control_reg != IS31FL32XX_REG_NONE) {
+		ret = is31fl32xx_write(priv, cdef->global_control_reg, 0x00);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int is31fl32xx_parse_child_dt(const struct device *dev,
+				     const struct device_node *child,
+				     struct is31fl32xx_led_data *led_data)
+{
+	struct led_classdev *cdev = &led_data->cdev;
+	int ret = 0;
+	u32 reg;
+
+	ret = of_property_read_u32(child, "reg", &reg);
+	if (ret || reg < 1 || reg > led_data->priv->cdef->channels) {
+		dev_err(dev,
+			"Child node %pOF does not have a valid reg property\n",
+			child);
+		return -EINVAL;
+	}
+	led_data->channel = reg;
+
+	cdev->brightness_set_blocking = is31fl32xx_brightness_set;
+
+	return 0;
+}
+
+static struct is31fl32xx_led_data *is31fl32xx_find_led_data(
+					struct is31fl32xx_priv *priv,
+					u8 channel)
+{
+	size_t i;
+
+	for (i = 0; i < priv->num_leds; i++) {
+		if (priv->leds[i].channel == channel)
+			return &priv->leds[i];
+	}
+
+	return NULL;
+}
+
+static int is31fl32xx_parse_dt(struct device *dev,
+			       struct is31fl32xx_priv *priv)
+{
+	struct device_node *child;
+	int ret = 0;
+
+	for_each_available_child_of_node(dev_of_node(dev), child) {
+		struct led_init_data init_data = {};
+		struct is31fl32xx_led_data *led_data =
+			&priv->leds[priv->num_leds];
+		const struct is31fl32xx_led_data *other_led_data;
+
+		led_data->priv = priv;
+
+		ret = is31fl32xx_parse_child_dt(dev, child, led_data);
+		if (ret)
+			goto err;
+
+		/* Detect if channel is already in use by another child */
+		other_led_data = is31fl32xx_find_led_data(priv,
+							  led_data->channel);
+		if (other_led_data) {
+			dev_err(dev,
+				"Node %pOF 'reg' conflicts with another LED\n",
+				child);
+			ret = -EINVAL;
+			goto err;
+		}
+
+		init_data.fwnode = of_fwnode_handle(child);
+
+		ret = devm_led_classdev_register_ext(dev, &led_data->cdev,
+						     &init_data);
+		if (ret) {
+			dev_err(dev, "Failed to register LED for %pOF: %d\n",
+				child, ret);
+			goto err;
+		}
+
+		priv->num_leds++;
+	}
+
+	return 0;
+
+err:
+	of_node_put(child);
+	return ret;
+}
+
+static const struct of_device_id of_is31fl32xx_match[] = {
+	{ .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, },
+	{ .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, },
+	{ .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, },
+	{ .compatible = "si-en,sn3218",    .data = &is31fl3218_cdef, },
+	{ .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, },
+	{ .compatible = "si-en,sn3216",    .data = &is31fl3216_cdef, },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_is31fl32xx_match);
+
+static int is31fl32xx_probe(struct i2c_client *client)
+{
+	const struct is31fl32xx_chipdef *cdef;
+	struct device *dev = &client->dev;
+	struct is31fl32xx_priv *priv;
+	int count;
+	int ret = 0;
+
+	cdef = device_get_match_data(dev);
+
+	count = of_get_available_child_count(dev_of_node(dev));
+	if (!count)
+		return -EINVAL;
+
+	priv = devm_kzalloc(dev, struct_size(priv, leds, count),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->cdef = cdef;
+	i2c_set_clientdata(client, priv);
+
+	ret = is31fl32xx_init_regs(priv);
+	if (ret)
+		return ret;
+
+	ret = is31fl32xx_parse_dt(dev, priv);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void is31fl32xx_remove(struct i2c_client *client)
+{
+	struct is31fl32xx_priv *priv = i2c_get_clientdata(client);
+	int ret;
+
+	ret = is31fl32xx_reset_regs(priv);
+	if (ret)
+		dev_err(&client->dev, "Failed to reset registers on removal (%pe)\n",
+			ERR_PTR(ret));
+}
+
+/*
+ * i2c-core (and modalias) requires that id_table be properly filled,
+ * even though it is not used for DeviceTree based instantiation.
+ */
+static const struct i2c_device_id is31fl32xx_id[] = {
+	{ "is31fl3236" },
+	{ "is31fl3235" },
+	{ "is31fl3218" },
+	{ "sn3218" },
+	{ "is31fl3216" },
+	{ "sn3216" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, is31fl32xx_id);
+
+static struct i2c_driver is31fl32xx_driver = {
+	.driver = {
+		.name	= "is31fl32xx",
+		.of_match_table = of_is31fl32xx_match,
+	},
+	.probe		= is31fl32xx_probe,
+	.remove		= is31fl32xx_remove,
+	.id_table	= is31fl32xx_id,
+};
+
+module_i2c_driver(is31fl32xx_driver);
+
+MODULE_AUTHOR("David Rivshin <drivshin@allworx.com>");
+MODULE_DESCRIPTION("ISSI IS31FL32xx LED driver");
+MODULE_LICENSE("GPL v2");