Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 439 insertions, 0 deletions

diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 0000000000..8ea746c499
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ *   - period: from 0s to 1.6s
+ *   - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1     0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1  0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0       0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0       0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1       0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1       0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0        0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1        0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8  0x08
+#define LP3944_REG_REGISTER9  0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c)       container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+	u8 id;
+	enum lp3944_type type;
+	struct led_classdev ldev;
+	struct i2c_client *client;
+};
+
+struct lp3944_data {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+	int tmp;
+
+	tmp = i2c_smbus_read_byte_data(client, reg);
+	if (tmp < 0)
+		return tmp;
+
+	*value = tmp;
+
+	return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * lp3944_dim_set_period() - Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+	u8 psc_reg;
+	u8 psc_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		psc_reg = LP3944_REG_PSC0;
+	else if (dim == LP3944_DIM1)
+		psc_reg = LP3944_REG_PSC1;
+	else
+		return -EINVAL;
+
+	/* Convert period to Prescaler value */
+	if (period > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+	err = lp3944_reg_write(client, psc_reg, psc_value);
+
+	return err;
+}
+
+/**
+ * lp3944_dim_set_dutycycle - Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+				    u8 duty_cycle)
+{
+	u8 pwm_reg;
+	u8 pwm_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		pwm_reg = LP3944_REG_PWM0;
+	else if (dim == LP3944_DIM1)
+		pwm_reg = LP3944_REG_PWM1;
+	else
+		return -EINVAL;
+
+	/* Convert duty cycle to PWM value */
+	if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+		return -EINVAL;
+
+	pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+	err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+	return err;
+}
+
+/**
+ * lp3944_led_set() - Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ *                 LP3944_LED_STATUS_ON
+ *                 LP3944_LED_STATUS_DIM0
+ *                 LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+	struct lp3944_data *data = i2c_get_clientdata(led->client);
+	u8 id = led->id;
+	u8 reg;
+	u8 val = 0;
+	int err;
+
+	dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+		__func__, led->ldev.name, status);
+
+	switch (id) {
+	case LP3944_LED0:
+	case LP3944_LED1:
+	case LP3944_LED2:
+	case LP3944_LED3:
+		reg = LP3944_REG_LS0;
+		break;
+	case LP3944_LED4:
+	case LP3944_LED5:
+	case LP3944_LED6:
+	case LP3944_LED7:
+		id -= LP3944_LED4;
+		reg = LP3944_REG_LS1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (status > LP3944_LED_STATUS_DIM1)
+		return -EINVAL;
+
+	/*
+	 * Invert status only when it's < 2 (i.e. 0 or 1) which means it's
+	 * controlling the on/off state directly.
+	 * When, instead, status is >= 2 don't invert it because it would mean
+	 * to mess with the hardware blinking mode.
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+		status = 1 - status;
+
+	mutex_lock(&data->lock);
+	lp3944_reg_read(led->client, reg, &val);
+
+	val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+	val |= (status << (id << 1));
+
+	dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+		__func__, led->ldev.name, reg, id, status, val);
+
+	/* set led status */
+	err = lp3944_reg_write(led->client, reg, val);
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+				unsigned long *delay_on,
+				unsigned long *delay_off)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+	u16 period;
+	u8 duty_cycle;
+	int err;
+
+	/* units are in ms */
+	if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* Special case: the leds subsystem requires a default user
+		 * friendly blink pattern for the LED.  Let's blink the led
+		 * slowly (1Hz).
+		 */
+		*delay_on = 500;
+		*delay_off = 500;
+	}
+
+	period = (*delay_on) + (*delay_off);
+
+	/* duty_cycle is the percentage of period during which the led is ON */
+	duty_cycle = 100 * (*delay_on) / period;
+
+	/* invert duty cycle for inverted leds, this has the same effect of
+	 * swapping delay_on and delay_off
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+		duty_cycle = 100 - duty_cycle;
+
+	/* NOTE: using always the first DIM mode, this means that all leds
+	 * will have the same blinking pattern.
+	 *
+	 * We could find a way later to have two leds blinking in hardware
+	 * with different patterns at the same time, falling back to software
+	 * control for the other ones.
+	 */
+	err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+	if (err)
+		return err;
+
+	err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+	if (err)
+		return err;
+
+	dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+		__func__);
+
+	lp3944_led_set(led, LP3944_LED_STATUS_DIM0);
+
+	return 0;
+}
+
+static int lp3944_led_set_brightness(struct led_classdev *led_cdev,
+				      enum led_brightness brightness)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+	dev_dbg(&led->client->dev, "%s: %s, %d\n",
+		__func__, led_cdev->name, brightness);
+
+	return lp3944_led_set(led, !!brightness);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+			    struct lp3944_data *data,
+			    struct lp3944_platform_data *pdata)
+{
+	int i, err = 0;
+
+	for (i = 0; i < pdata->leds_size; i++) {
+		struct lp3944_led *pled = &pdata->leds[i];
+		struct lp3944_led_data *led = &data->leds[i];
+		led->client = client;
+		led->id = i;
+
+		switch (pled->type) {
+
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led->type = pled->type;
+			led->ldev.name = pled->name;
+			led->ldev.max_brightness = 1;
+			led->ldev.brightness_set_blocking =
+						lp3944_led_set_brightness;
+			led->ldev.blink_set = lp3944_led_set_blink;
+			led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+			err = led_classdev_register(&client->dev, &led->ldev);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->ldev.name);
+				goto exit;
+			}
+
+			/* to expose the default value to userspace */
+			led->ldev.brightness =
+					(enum led_brightness) pled->status;
+
+			/* Set the default led status */
+			err = lp3944_led_set(led, pled->status);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"%s couldn't set STATUS %d\n",
+					led->ldev.name, pled->status);
+				goto exit;
+			}
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+
+		}
+	}
+	return 0;
+
+exit:
+	if (i > 0)
+		for (i = i - 1; i >= 0; i--)
+			switch (pdata->leds[i].type) {
+
+			case LP3944_LED_TYPE_LED:
+			case LP3944_LED_TYPE_LED_INVERTED:
+				led_classdev_unregister(&data->leds[i].ldev);
+				break;
+
+			case LP3944_LED_TYPE_NONE:
+			default:
+				break;
+			}
+
+	return err;
+}
+
+static int lp3944_probe(struct i2c_client *client)
+{
+	struct lp3944_platform_data *lp3944_pdata =
+			dev_get_platdata(&client->dev);
+	struct lp3944_data *data;
+	int err;
+
+	if (lp3944_pdata == NULL) {
+		dev_err(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	/* Let's see whether this adapter can support what we need. */
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "insufficient functionality!\n");
+		return -ENODEV;
+	}
+
+	data = devm_kzalloc(&client->dev, sizeof(struct lp3944_data),
+			GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	mutex_init(&data->lock);
+
+	err = lp3944_configure(client, data, lp3944_pdata);
+	if (err < 0)
+		return err;
+
+	dev_info(&client->dev, "lp3944 enabled\n");
+	return 0;
+}
+
+static void lp3944_remove(struct i2c_client *client)
+{
+	struct lp3944_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct lp3944_data *data = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < pdata->leds_size; i++)
+		switch (data->leds[i].type) {
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+		}
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+	{"lp3944", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+	.driver   = {
+		   .name = "lp3944",
+	},
+	.probe    = lp3944_probe,
+	.remove   = lp3944_remove,
+	.id_table = lp3944_id,
+};
+
+module_i2c_driver(lp3944_driver);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");