Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

24 files changed, 925 insertions, 181 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d721b254e1..05e6af88b8 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -6,6 +6,12 @@ config LEDS_GPIO_REGISTER
 	  As this function is used by arch code it must not be compiled as a
 	  module.
 
+# This library does not depend on NEW_LEDS and must be independent so it can be
+# selected from other subsystems (specifically backlight).
+config LEDS_EXPRESSWIRE
+	bool
+	depends on GPIOLIB
+
 menuconfig NEW_LEDS
 	bool "LED Support"
 	help
@@ -186,6 +192,10 @@ config LEDS_EL15203000
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-el15203000.
 
+config LEDS_EXPRESSWIRE
+	bool
+	depends on GPIOLIB
+
 config LEDS_TURRIS_OMNIA
 	tristate "LED support for CZ.NIC's Turris Omnia"
 	depends on LEDS_CLASS_MULTICOLOR
@@ -395,7 +405,7 @@ config LEDS_LP3952
 config LEDS_LP50XX
 	tristate "LED Support for TI LP5036/30/24/18/12/09 LED driver chip"
 	depends on LEDS_CLASS && REGMAP_I2C
-	depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
+	depends on LEDS_CLASS_MULTICOLOR
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
@@ -406,7 +416,7 @@ config LEDS_LP50XX
 config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_CLASS
-	depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
+	depends on LEDS_CLASS_MULTICOLOR
 	depends on OF
 	depends on I2C
 	select FW_LOADER
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index ce07dc295f..effdfc6f1e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -91,6 +91,9 @@ obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 
+# Kinetic ExpressWire Protocol
+obj-$(CONFIG_LEDS_EXPRESSWIRE)		+= leds-expresswire.o
+
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index 4e08dbc057..809b6d98bb 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -23,7 +23,8 @@ config LEDS_AS3645A
 config LEDS_KTD2692
 	tristate "LED support for Kinetic KTD2692 flash LED controller"
 	depends on OF
-	depends on GPIOLIB || COMPILE_TEST
+	depends on GPIOLIB
+	select LEDS_EXPRESSWIRE
 	help
 	  This option enables support for Kinetic KTD2692 LED flash connected
 	  through ExpressWire interface.
@@ -51,8 +52,8 @@ config LEDS_MAX77693
 config LEDS_MT6360
 	tristate "LED Support for Mediatek MT6360 PMIC"
 	depends on LEDS_CLASS && OF
-	depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
-	depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
+	depends on LEDS_CLASS_FLASH
+	depends on LEDS_CLASS_MULTICOLOR
 	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
 	depends on MFD_MT6360
 	help
diff --git a/drivers/leds/flash/leds-ktd2692.c b/drivers/leds/flash/leds-ktd2692.c
index 598eee5daa..7bb0aa2753 100644
--- a/drivers/leds/flash/leds-ktd2692.c
+++ b/drivers/leds/flash/leds-ktd2692.c
@@ -6,9 +6,9 @@
  * Ingi Kim <ingi2.kim@samsung.com>
  */
 
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio/consumer.h>
+#include <linux/leds-expresswire.h>
 #include <linux/led-class-flash.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -37,22 +37,9 @@
 #define KTD2692_REG_FLASH_CURRENT_BASE		0x80
 #define KTD2692_REG_MODE_BASE			0xA0
 
-/* Set bit coding time for expresswire interface */
-#define KTD2692_TIME_RESET_US			700
-#define KTD2692_TIME_DATA_START_TIME_US		10
-#define KTD2692_TIME_HIGH_END_OF_DATA_US	350
-#define KTD2692_TIME_LOW_END_OF_DATA_US		10
-#define KTD2692_TIME_SHORT_BITSET_US		4
-#define KTD2692_TIME_LONG_BITSET_US		12
-
 /* KTD2692 default length of name */
 #define KTD2692_NAME_LENGTH			20
 
-enum ktd2692_bitset {
-	KTD2692_LOW = 0,
-	KTD2692_HIGH,
-};
-
 /* Movie / Flash Mode Control */
 enum ktd2692_led_mode {
 	KTD2692_MODE_DISABLE = 0,	/* default */
@@ -71,7 +58,19 @@ struct ktd2692_led_config_data {
 	enum led_brightness max_brightness;
 };
 
+const struct expresswire_timing ktd2692_timing = {
+	.poweroff_us = 700,
+	.data_start_us = 10,
+	.end_of_data_low_us = 10,
+	.end_of_data_high_us = 350,
+	.short_bitset_us = 4,
+	.long_bitset_us = 12
+};
+
 struct ktd2692_context {
+	/* Common ExpressWire properties (ctrl GPIO and timing) */
+	struct expresswire_common_props props;
+
 	/* Related LED Flash class device */
 	struct led_classdev_flash fled_cdev;
 
@@ -80,7 +79,6 @@ struct ktd2692_context {
 	struct regulator *regulator;
 
 	struct gpio_desc *aux_gpio;
-	struct gpio_desc *ctrl_gpio;
 
 	enum ktd2692_led_mode mode;
 	enum led_brightness torch_brightness;
@@ -92,67 +90,6 @@ static struct ktd2692_context *fled_cdev_to_led(
 	return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
 }
 
-static void ktd2692_expresswire_start(struct ktd2692_context *led)
-{
-	gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
-	udelay(KTD2692_TIME_DATA_START_TIME_US);
-}
-
-static void ktd2692_expresswire_reset(struct ktd2692_context *led)
-{
-	gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
-	udelay(KTD2692_TIME_RESET_US);
-}
-
-static void ktd2692_expresswire_end(struct ktd2692_context *led)
-{
-	gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
-	udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
-	gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
-	udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
-}
-
-static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
-{
-	/*
-	 * The Low Bit(0) and High Bit(1) is based on a time detection
-	 * algorithm between time low and time high
-	 * Time_(L_LB) : Low time of the Low Bit(0)
-	 * Time_(H_LB) : High time of the LOW Bit(0)
-	 * Time_(L_HB) : Low time of the High Bit(1)
-	 * Time_(H_HB) : High time of the High Bit(1)
-	 *
-	 * It can be simplified to:
-	 * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
-	 * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
-	 * HIGH  ___           ____    _..     _________    ___
-	 *          |_________|    |_..  |____|         |__|
-	 * LOW        <L_LB>  <H_LB>     <L_HB>  <H_HB>
-	 *          [  Low Bit (0) ]     [  High Bit(1) ]
-	 */
-	if (bit) {
-		gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
-		udelay(KTD2692_TIME_SHORT_BITSET_US);
-		gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
-		udelay(KTD2692_TIME_LONG_BITSET_US);
-	} else {
-		gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
-		udelay(KTD2692_TIME_LONG_BITSET_US);
-		gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
-		udelay(KTD2692_TIME_SHORT_BITSET_US);
-	}
-}
-
-static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
-{
-	int i;
-
-	ktd2692_expresswire_start(led);
-	for (i = 7; i >= 0; i--)
-		ktd2692_expresswire_set_bit(led, value & BIT(i));
-	ktd2692_expresswire_end(led);
-}
-
 static int ktd2692_led_brightness_set(struct led_classdev *led_cdev,
 				       enum led_brightness brightness)
 {
@@ -163,14 +100,14 @@ static int ktd2692_led_brightness_set(struct led_classdev *led_cdev,
 
 	if (brightness == LED_OFF) {
 		led->mode = KTD2692_MODE_DISABLE;
-		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+		gpiod_direction_output(led->aux_gpio, 0);
 	} else {
-		ktd2692_expresswire_write(led, brightness |
+		expresswire_write_u8(&led->props, brightness |
 					KTD2692_REG_MOVIE_CURRENT_BASE);
 		led->mode = KTD2692_MODE_MOVIE;
 	}
 
-	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+	expresswire_write_u8(&led->props, led->mode | KTD2692_REG_MODE_BASE);
 	mutex_unlock(&led->lock);
 
 	return 0;
@@ -187,17 +124,17 @@ static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
 
 	if (state) {
 		flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
-		ktd2692_expresswire_write(led, flash_tm_reg
+		expresswire_write_u8(&led->props, flash_tm_reg
 				| KTD2692_REG_FLASH_TIMEOUT_BASE);
 
 		led->mode = KTD2692_MODE_FLASH;
-		gpiod_direction_output(led->aux_gpio, KTD2692_HIGH);
+		gpiod_direction_output(led->aux_gpio, 1);
 	} else {
 		led->mode = KTD2692_MODE_DISABLE;
-		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+		gpiod_direction_output(led->aux_gpio, 0);
 	}
 
-	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+	expresswire_write_u8(&led->props, led->mode | KTD2692_REG_MODE_BASE);
 
 	fled_cdev->led_cdev.brightness = LED_OFF;
 	led->mode = KTD2692_MODE_DISABLE;
@@ -247,12 +184,12 @@ static void ktd2692_init_flash_timeout(struct led_classdev_flash *fled_cdev,
 static void ktd2692_setup(struct ktd2692_context *led)
 {
 	led->mode = KTD2692_MODE_DISABLE;
-	ktd2692_expresswire_reset(led);
-	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+	expresswire_power_off(&led->props);
+	gpiod_direction_output(led->aux_gpio, 0);
 
-	ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+	expresswire_write_u8(&led->props, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
 				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
-	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
+	expresswire_write_u8(&led->props, KTD2692_FLASH_MODE_CURR_PERCENT(45)
 				 | KTD2692_REG_FLASH_CURRENT_BASE);
 }
 
@@ -277,8 +214,8 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
 	if (!np)
 		return -ENXIO;
 
-	led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
-	ret = PTR_ERR_OR_ZERO(led->ctrl_gpio);
+	led->props.ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
+	ret = PTR_ERR_OR_ZERO(led->props.ctrl_gpio);
 	if (ret)
 		return dev_err_probe(dev, ret, "cannot get ctrl-gpios\n");
 
@@ -412,6 +349,7 @@ static struct platform_driver ktd2692_driver = {
 
 module_platform_driver(ktd2692_driver);
 
+MODULE_IMPORT_NS(EXPRESSWIRE);
 MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>");
 MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/flash/leds-lm3601x.c b/drivers/leds/flash/leds-lm3601x.c
index 8191be0ef0..7e93c447fe 100644
--- a/drivers/leds/flash/leds-lm3601x.c
+++ b/drivers/leds/flash/leds-lm3601x.c
@@ -70,12 +70,11 @@ enum lm3601x_type {
 };
 
 /**
- * struct lm3601x_led -
+ * struct lm3601x_led - private lm3601x LED data
  * @fled_cdev: flash LED class device pointer
  * @client: Pointer to the I2C client
  * @regmap: Devices register map
  * @lock: Lock for reading/writing the device
- * @led_name: LED label for the Torch or IR LED
  * @flash_timeout: the timeout for the flash
  * @last_flag: last known flags register value
  * @torch_current_max: maximum current for the torch
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index bd59a14a4a..0f5ac30053 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -23,7 +23,7 @@
  * Nests outside led_cdev->trigger_lock
  */
 static DECLARE_RWSEM(triggers_list_lock);
-LIST_HEAD(trigger_list);
+static LIST_HEAD(trigger_list);
 
  /* Used by LED Class */
 
@@ -247,9 +247,23 @@ void led_trigger_remove(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_trigger_remove);
 
+static bool led_match_default_trigger(struct led_classdev *led_cdev,
+				      struct led_trigger *trig)
+{
+	if (!strcmp(led_cdev->default_trigger, trig->name) &&
+	    trigger_relevant(led_cdev, trig)) {
+		led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
+		led_trigger_set(led_cdev, trig);
+		return true;
+	}
+
+	return false;
+}
+
 void led_trigger_set_default(struct led_classdev *led_cdev)
 {
 	struct led_trigger *trig;
+	bool found = false;
 
 	if (!led_cdev->default_trigger)
 		return;
@@ -257,15 +271,19 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
 	down_read(&triggers_list_lock);
 	down_write(&led_cdev->trigger_lock);
 	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (!strcmp(led_cdev->default_trigger, trig->name) &&
-		    trigger_relevant(led_cdev, trig)) {
-			led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
-			led_trigger_set(led_cdev, trig);
+		found = led_match_default_trigger(led_cdev, trig);
+		if (found)
 			break;
-		}
 	}
 	up_write(&led_cdev->trigger_lock);
 	up_read(&triggers_list_lock);
+
+	/*
+	 * If default trigger wasn't found, maybe trigger module isn't loaded yet.
+	 * Once loaded it will re-probe with all led_cdev's.
+	 */
+	if (!found)
+		request_module_nowait("ledtrig:%s", led_cdev->default_trigger);
 }
 EXPORT_SYMBOL_GPL(led_trigger_set_default);
 
@@ -297,12 +315,8 @@ int led_trigger_register(struct led_trigger *trig)
 	down_read(&leds_list_lock);
 	list_for_each_entry(led_cdev, &leds_list, node) {
 		down_write(&led_cdev->trigger_lock);
-		if (!led_cdev->trigger && led_cdev->default_trigger &&
-		    !strcmp(led_cdev->default_trigger, trig->name) &&
-		    trigger_relevant(led_cdev, trig)) {
-			led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
-			led_trigger_set(led_cdev, trig);
-		}
+		if (!led_cdev->trigger && led_cdev->default_trigger)
+			led_match_default_trigger(led_cdev, trig);
 		up_write(&led_cdev->trigger_lock);
 	}
 	up_read(&leds_list_lock);
diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
index f584a7f98f..6c8c9f2c19 100644
--- a/drivers/leds/leds-aw200xx.c
+++ b/drivers/leds/leds-aw200xx.c
@@ -282,7 +282,7 @@ static int aw200xx_set_imax(const struct aw200xx *const chip,
 			    u32 led_imax_uA)
 {
 	u32 g_imax_uA = aw200xx_imax_to_global(chip, led_imax_uA);
-	u32 coeff_table[] = {1, 2, 3, 4, 6, 8, 12, 16};
+	static const u32 coeff_table[] = {1, 2, 3, 4, 6, 8, 12, 16};
 	u32 gccr_imax = UINT_MAX;
 	u32 cur_imax = 0;
 	int i;
diff --git a/drivers/leds/leds-expresswire.c b/drivers/leds/leds-expresswire.c
new file mode 100644
index 0000000000..e4937a8e0f
--- /dev/null
+++ b/drivers/leds/leds-expresswire.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Shared library for Kinetic's ExpressWire protocol.
+ * This protocol works by pulsing the ExpressWire IC's control GPIO.
+ * ktd2692 and ktd2801 are known to use this protocol.
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/types.h>
+
+#include <linux/leds-expresswire.h>
+
+void expresswire_power_off(struct expresswire_common_props *props)
+{
+	gpiod_set_value_cansleep(props->ctrl_gpio, 0);
+	usleep_range(props->timing.poweroff_us, props->timing.poweroff_us * 2);
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_power_off, EXPRESSWIRE);
+
+void expresswire_enable(struct expresswire_common_props *props)
+{
+	gpiod_set_value(props->ctrl_gpio, 1);
+	udelay(props->timing.detect_delay_us);
+	gpiod_set_value(props->ctrl_gpio, 0);
+	udelay(props->timing.detect_us);
+	gpiod_set_value(props->ctrl_gpio, 1);
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_enable, EXPRESSWIRE);
+
+void expresswire_start(struct expresswire_common_props *props)
+{
+	gpiod_set_value(props->ctrl_gpio, 1);
+	udelay(props->timing.data_start_us);
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_start, EXPRESSWIRE);
+
+void expresswire_end(struct expresswire_common_props *props)
+{
+	gpiod_set_value(props->ctrl_gpio, 0);
+	udelay(props->timing.end_of_data_low_us);
+	gpiod_set_value(props->ctrl_gpio, 1);
+	udelay(props->timing.end_of_data_high_us);
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_end, EXPRESSWIRE);
+
+void expresswire_set_bit(struct expresswire_common_props *props, bool bit)
+{
+	if (bit) {
+		gpiod_set_value(props->ctrl_gpio, 0);
+		udelay(props->timing.short_bitset_us);
+		gpiod_set_value(props->ctrl_gpio, 1);
+		udelay(props->timing.long_bitset_us);
+	} else {
+		gpiod_set_value(props->ctrl_gpio, 0);
+		udelay(props->timing.long_bitset_us);
+		gpiod_set_value(props->ctrl_gpio, 1);
+		udelay(props->timing.short_bitset_us);
+	}
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_set_bit, EXPRESSWIRE);
+
+void expresswire_write_u8(struct expresswire_common_props *props, u8 val)
+{
+	expresswire_start(props);
+	for (int i = 7; i >= 0; i--)
+		expresswire_set_bit(props, val & BIT(i));
+	expresswire_end(props);
+}
+EXPORT_SYMBOL_NS_GPL(expresswire_write_u8, EXPRESSWIRE);
diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
index 1355c84a29..718f55096e 100644
--- a/drivers/leds/leds-mlxcpld.c
+++ b/drivers/leds/leds-mlxcpld.c
@@ -77,7 +77,7 @@ struct mlxcpld_param {
 
 /**
  * struct mlxcpld_led_priv - LED private data:
- * @cled: LED class device instance
+ * @cdev: LED class device instance
  * @param: LED CPLD access parameters
 **/
 struct mlxcpld_led_priv {
diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
index d8e3d5d8d2..5595788d98 100644
--- a/drivers/leds/leds-mlxreg.c
+++ b/drivers/leds/leds-mlxreg.c
@@ -29,7 +29,6 @@
  * @data: led configuration data;
  * @led_cdev: led class data;
  * @base_color: base led color (other colors have constant offset from base);
- * @led_data: led data;
  * @data_parent: pointer to private device control data of parent;
  * @led_cdev_name: class device name
  */
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 47223c850e..b53905da35 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -39,6 +39,7 @@
 #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
 #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
 
+#define PCA963X_MODE1_SLEEP	0x04    /* Normal mode or Low Power mode, oscillator off */
 #define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
 #define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
 #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
@@ -380,6 +381,32 @@ err:
 	return ret;
 }
 
+static int pca963x_suspend(struct device *dev)
+{
+	struct pca963x *chip = dev_get_drvdata(dev);
+	u8 reg;
+
+	reg = i2c_smbus_read_byte_data(chip->client, PCA963X_MODE1);
+	reg = reg | BIT(PCA963X_MODE1_SLEEP);
+	i2c_smbus_write_byte_data(chip->client, PCA963X_MODE1, reg);
+
+	return 0;
+}
+
+static int pca963x_resume(struct device *dev)
+{
+	struct pca963x *chip = dev_get_drvdata(dev);
+	u8 reg;
+
+	reg = i2c_smbus_read_byte_data(chip->client, PCA963X_MODE1);
+	reg = reg & ~BIT(PCA963X_MODE1_SLEEP);
+	i2c_smbus_write_byte_data(chip->client, PCA963X_MODE1, reg);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pca963x_pm, pca963x_suspend, pca963x_resume);
+
 static const struct of_device_id of_pca963x_match[] = {
 	{ .compatible = "nxp,pca9632", },
 	{ .compatible = "nxp,pca9633", },
@@ -430,6 +457,7 @@ static struct i2c_driver pca963x_driver = {
 	.driver = {
 		.name	= "leds-pca963x",
 		.of_match_table = of_pca963x_match,
+		.pm = pm_sleep_ptr(&pca963x_pm)
 	},
 	.probe = pca963x_probe,
 	.id_table = pca963x_id,
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 4e3936a39d..e1b414b403 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -53,7 +53,13 @@ static int led_pwm_set(struct led_classdev *led_cdev,
 		duty = led_dat->pwmstate.period - duty;
 
 	led_dat->pwmstate.duty_cycle = duty;
-	led_dat->pwmstate.enabled = true;
+	/*
+	 * Disabling a PWM doesn't guarantee that it emits the inactive level.
+	 * So keep it on. Only for suspending the PWM should be disabled because
+	 * otherwise it refuses to suspend. The possible downside is that the
+	 * LED might stay (or even go) on.
+	 */
+	led_dat->pwmstate.enabled = !(led_cdev->flags & LED_SUSPENDED);
 	return pwm_apply_might_sleep(led_dat->pwm, &led_dat->pwmstate);
 }
 
diff --git a/drivers/leds/leds-spi-byte.c b/drivers/leds/leds-spi-byte.c
index 9d91f21842..96296db5f4 100644
--- a/drivers/leds/leds-spi-byte.c
+++ b/drivers/leds/leds-spi-byte.c
@@ -83,7 +83,7 @@ static int spi_byte_probe(struct spi_device *spi)
 	struct device_node *child;
 	struct device *dev = &spi->dev;
 	struct spi_byte_led *led;
-	const char *name = "leds-spi-byte::";
+	struct led_init_data init_data = {};
 	const char *state;
 	int ret;
 
@@ -97,12 +97,9 @@ static int spi_byte_probe(struct spi_device *spi)
 	if (!led)
 		return -ENOMEM;
 
-	of_property_read_string(child, "label", &name);
-	strscpy(led->name, name, sizeof(led->name));
 	led->spi = spi;
 	mutex_init(&led->mutex);
 	led->cdef = device_get_match_data(dev);
-	led->ldev.name = led->name;
 	led->ldev.brightness = LED_OFF;
 	led->ldev.max_brightness = led->cdef->max_value - led->cdef->off_value;
 	led->ldev.brightness_set_blocking = spi_byte_brightness_set_blocking;
@@ -120,7 +117,11 @@ static int spi_byte_probe(struct spi_device *spi)
 	spi_byte_brightness_set_blocking(&led->ldev,
 					 led->ldev.brightness);
 
-	ret = devm_led_classdev_register(&spi->dev, &led->ldev);
+	init_data.fwnode = of_fwnode_handle(child);
+	init_data.devicename = "leds-spi-byte";
+	init_data.default_label = ":";
+
+	ret = devm_led_classdev_register_ext(&spi->dev, &led->ldev, &init_data);
 	if (ret) {
 		mutex_destroy(&led->mutex);
 		return ret;
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index 6fd89efb42..a621e5e5c7 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -17,7 +17,7 @@
 #include <asm/fhc.h>
 #include <asm/upa.h>
 
-MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
 MODULE_DESCRIPTION("Sun Fire LED driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 345062ccab..1138e2ab82 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -30,7 +30,6 @@ ssize_t led_trigger_write(struct file *filp, struct kobject *kobj,
 
 extern struct rw_semaphore leds_list_lock;
 extern struct list_head leds_list;
-extern struct list_head trigger_list;
 extern const char * const led_colors[LED_COLOR_ID_MAX];
 
 #endif	/* __LEDS_H_INCLUDED */
diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
index e66bd21b98..8fc12d6a29 100644
--- a/drivers/leds/rgb/Kconfig
+++ b/drivers/leds/rgb/Kconfig
@@ -27,6 +27,17 @@ config LEDS_KTD202X
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-ktd202x.
 
+config LEDS_NCP5623
+	tristate "LED support for NCP5623"
+	depends on I2C
+	depends on OF
+	help
+	  This option enables support for ON semiconductor NCP5623
+	  Triple Output I2C Controlled RGB LED Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called leds-ncp5623.
+
 config LEDS_PWM_MULTICOLOR
 	tristate "PWM driven multi-color LED Support"
 	depends on PWM
@@ -41,6 +52,7 @@ config LEDS_QCOM_LPG
 	tristate "LED support for Qualcomm LPG"
 	depends on OF
 	depends on PWM
+	depends on QCOM_PBS || !QCOM_PBS
 	depends on SPMI
 	help
 	  This option enables support for the Light Pulse Generator found in a
diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
index 243f31e4d7..a501fd27f1 100644
--- a/drivers/leds/rgb/Makefile
+++ b/drivers/leds/rgb/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_LEDS_GROUP_MULTICOLOR)	+= leds-group-multicolor.o
 obj-$(CONFIG_LEDS_KTD202X)		+= leds-ktd202x.o
+obj-$(CONFIG_LEDS_NCP5623)		+= leds-ncp5623.o
 obj-$(CONFIG_LEDS_PWM_MULTICOLOR)	+= leds-pwm-multicolor.o
 obj-$(CONFIG_LEDS_QCOM_LPG)		+= leds-qcom-lpg.o
 obj-$(CONFIG_LEDS_MT6370_RGB)		+= leds-mt6370-rgb.o
diff --git a/drivers/leds/rgb/leds-group-multicolor.c b/drivers/leds/rgb/leds-group-multicolor.c
index 39f58be32a..b6c7679015 100644
--- a/drivers/leds/rgb/leds-group-multicolor.c
+++ b/drivers/leds/rgb/leds-group-multicolor.c
@@ -69,7 +69,7 @@ static int leds_gmc_probe(struct platform_device *pdev)
 	struct mc_subled *subled;
 	struct leds_multicolor *priv;
 	unsigned int max_brightness = 0;
-	int i, ret, count = 0;
+	int i, ret, count = 0, common_flags = 0;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -91,6 +91,7 @@ static int leds_gmc_probe(struct platform_device *pdev)
 		if (!priv->monochromatics)
 			return -ENOMEM;
 
+		common_flags |= led_cdev->flags;
 		priv->monochromatics[count] = led_cdev;
 
 		max_brightness = max(max_brightness, led_cdev->max_brightness);
@@ -114,12 +115,15 @@ static int leds_gmc_probe(struct platform_device *pdev)
 
 	/* Initialise the multicolor's LED class device */
 	cdev = &priv->mc_cdev.led_cdev;
-	cdev->flags = LED_CORE_SUSPENDRESUME;
 	cdev->brightness_set_blocking = leds_gmc_set;
 	cdev->max_brightness = max_brightness;
 	cdev->color = LED_COLOR_ID_MULTI;
 	priv->mc_cdev.num_colors = count;
 
+	/* we only need suspend/resume if a sub-led requests it */
+	if (common_flags & LED_CORE_SUSPENDRESUME)
+		cdev->flags = LED_CORE_SUSPENDRESUME;
+
 	init_data.fwnode = dev_fwnode(dev);
 	ret = devm_led_classdev_multicolor_register_ext(dev, &priv->mc_cdev, &init_data);
 	if (ret)
diff --git a/drivers/leds/rgb/leds-ncp5623.c b/drivers/leds/rgb/leds-ncp5623.c
new file mode 100644
index 0000000000..2be4ff9185
--- /dev/null
+++ b/drivers/leds/rgb/leds-ncp5623.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NCP5623 Multi-LED Driver
+ *
+ * Author: Abdel Alkuor <alkuor@gmail.com>
+ * Datasheet: https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include <linux/led-class-multicolor.h>
+
+#define NCP5623_FUNCTION_OFFSET		0x5
+#define NCP5623_REG(x)			((x) << NCP5623_FUNCTION_OFFSET)
+
+#define NCP5623_SHUTDOWN_REG		NCP5623_REG(0x0)
+#define NCP5623_ILED_REG		NCP5623_REG(0x1)
+#define NCP5623_PWM_REG(index)		NCP5623_REG(0x2 + (index))
+#define NCP5623_UPWARD_STEP_REG		NCP5623_REG(0x5)
+#define NCP5623_DOWNWARD_STEP_REG	NCP5623_REG(0x6)
+#define NCP5623_DIMMING_TIME_REG	NCP5623_REG(0x7)
+
+#define NCP5623_MAX_BRIGHTNESS		0x1f
+#define NCP5623_MAX_DIM_TIME_MS		240
+#define NCP5623_DIM_STEP_MS		8
+
+struct ncp5623 {
+	struct i2c_client *client;
+	struct led_classdev_mc mc_dev;
+	struct mutex lock;
+
+	int current_brightness;
+	unsigned long delay;
+};
+
+static int ncp5623_write(struct i2c_client *client, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(client, reg | data, 0);
+}
+
+static int ncp5623_brightness_set(struct led_classdev *cdev,
+				  enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct ncp5623 *ncp = container_of(mc_cdev, struct ncp5623, mc_dev);
+	int ret;
+
+	guard(mutex)(&ncp->lock);
+
+	if (ncp->delay && time_is_after_jiffies(ncp->delay))
+		return -EBUSY;
+
+	ncp->delay = 0;
+
+	for (int i = 0; i < mc_cdev->num_colors; i++) {
+		ret = ncp5623_write(ncp->client,
+				    NCP5623_PWM_REG(mc_cdev->subled_info[i].channel),
+				    min(mc_cdev->subled_info[i].intensity,
+					NCP5623_MAX_BRIGHTNESS));
+		if (ret)
+			return ret;
+	}
+
+	ret = ncp5623_write(ncp->client, NCP5623_DIMMING_TIME_REG, 0);
+	if (ret)
+		return ret;
+
+	ret = ncp5623_write(ncp->client, NCP5623_ILED_REG, brightness);
+	if (ret)
+		return ret;
+
+	ncp->current_brightness = brightness;
+
+	return 0;
+}
+
+static int ncp5623_pattern_set(struct led_classdev *cdev,
+			       struct led_pattern *pattern,
+			       u32 len, int repeat)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct ncp5623 *ncp = container_of(mc_cdev, struct ncp5623, mc_dev);
+	int brightness_diff;
+	u8 reg;
+	int ret;
+
+	guard(mutex)(&ncp->lock);
+
+	if (ncp->delay && time_is_after_jiffies(ncp->delay))
+		return -EBUSY;
+
+	ncp->delay = 0;
+
+	if (pattern[0].delta_t > NCP5623_MAX_DIM_TIME_MS ||
+	   (pattern[0].delta_t % NCP5623_DIM_STEP_MS) != 0)
+		return -EINVAL;
+
+	brightness_diff = pattern[0].brightness - ncp->current_brightness;
+
+	if (brightness_diff == 0)
+		return 0;
+
+	if (pattern[0].delta_t) {
+		if (brightness_diff > 0)
+			reg = NCP5623_UPWARD_STEP_REG;
+		else
+			reg = NCP5623_DOWNWARD_STEP_REG;
+	} else {
+		reg = NCP5623_ILED_REG;
+	}
+
+	ret = ncp5623_write(ncp->client, reg,
+			    min(pattern[0].brightness, NCP5623_MAX_BRIGHTNESS));
+	if (ret)
+		return ret;
+
+	ret = ncp5623_write(ncp->client,
+			    NCP5623_DIMMING_TIME_REG,
+			    pattern[0].delta_t / NCP5623_DIM_STEP_MS);
+	if (ret)
+		return ret;
+
+	/*
+	 * During testing, when the brightness difference is 1, for some
+	 * unknown reason, the time factor it takes to change to the new
+	 * value is the longest time possible. Otherwise, the time factor
+	 * is simply the brightness difference.
+	 *
+	 * For example:
+	 * current_brightness = 20 and new_brightness = 21 then the time it
+	 * takes to set the new brightness increments to the maximum possible
+	 * brightness from 20 then from 0 to 21.
+	 * time_factor = max_brightness - 20 + 21
+	 */
+	if (abs(brightness_diff) == 1)
+		ncp->delay = NCP5623_MAX_BRIGHTNESS + brightness_diff;
+	else
+		ncp->delay = abs(brightness_diff);
+
+	ncp->delay = msecs_to_jiffies(ncp->delay * pattern[0].delta_t) + jiffies;
+
+	ncp->current_brightness = pattern[0].brightness;
+
+	return 0;
+}
+
+static int ncp5623_pattern_clear(struct led_classdev *led_cdev)
+{
+	return 0;
+}
+
+static int ncp5623_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct fwnode_handle *mc_node, *led_node;
+	struct led_init_data init_data = { };
+	int num_subleds = 0;
+	struct ncp5623 *ncp;
+	struct mc_subled *subled_info;
+	u32 color_index;
+	u32 reg;
+	int ret;
+
+	ncp = devm_kzalloc(dev, sizeof(*ncp), GFP_KERNEL);
+	if (!ncp)
+		return -ENOMEM;
+
+	ncp->client = client;
+
+	mc_node = device_get_named_child_node(dev, "multi-led");
+	if (!mc_node)
+		return -EINVAL;
+
+	fwnode_for_each_child_node(mc_node, led_node)
+		num_subleds++;
+
+	subled_info = devm_kcalloc(dev, num_subleds, sizeof(*subled_info), GFP_KERNEL);
+	if (!subled_info) {
+		ret = -ENOMEM;
+		goto release_mc_node;
+	}
+
+	fwnode_for_each_available_child_node(mc_node, led_node) {
+		ret = fwnode_property_read_u32(led_node, "color", &color_index);
+		if (ret) {
+			fwnode_handle_put(led_node);
+			goto release_mc_node;
+		}
+
+		ret = fwnode_property_read_u32(led_node, "reg", &reg);
+		if (ret) {
+			fwnode_handle_put(led_node);
+			goto release_mc_node;
+		}
+
+		subled_info[ncp->mc_dev.num_colors].channel = reg;
+		subled_info[ncp->mc_dev.num_colors++].color_index = color_index;
+	}
+
+	init_data.fwnode = mc_node;
+
+	ncp->mc_dev.led_cdev.max_brightness = NCP5623_MAX_BRIGHTNESS;
+	ncp->mc_dev.subled_info = subled_info;
+	ncp->mc_dev.led_cdev.brightness_set_blocking = ncp5623_brightness_set;
+	ncp->mc_dev.led_cdev.pattern_set = ncp5623_pattern_set;
+	ncp->mc_dev.led_cdev.pattern_clear = ncp5623_pattern_clear;
+	ncp->mc_dev.led_cdev.default_trigger = "pattern";
+
+	mutex_init(&ncp->lock);
+	i2c_set_clientdata(client, ncp);
+
+	ret = led_classdev_multicolor_register_ext(dev, &ncp->mc_dev, &init_data);
+	if (ret)
+		goto destroy_lock;
+
+	return 0;
+
+destroy_lock:
+	mutex_destroy(&ncp->lock);
+
+release_mc_node:
+	fwnode_handle_put(mc_node);
+
+	return ret;
+}
+
+static void ncp5623_remove(struct i2c_client *client)
+{
+	struct ncp5623 *ncp = i2c_get_clientdata(client);
+
+	mutex_lock(&ncp->lock);
+	ncp->delay = 0;
+	mutex_unlock(&ncp->lock);
+
+	ncp5623_write(client, NCP5623_DIMMING_TIME_REG, 0);
+	led_classdev_multicolor_unregister(&ncp->mc_dev);
+	mutex_destroy(&ncp->lock);
+}
+
+static void ncp5623_shutdown(struct i2c_client *client)
+{
+	struct ncp5623 *ncp = i2c_get_clientdata(client);
+
+	if (!(ncp->mc_dev.led_cdev.flags & LED_RETAIN_AT_SHUTDOWN))
+		ncp5623_write(client, NCP5623_SHUTDOWN_REG, 0);
+
+	mutex_destroy(&ncp->lock);
+}
+
+static const struct of_device_id ncp5623_id[] = {
+	{ .compatible = "onnn,ncp5623" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ncp5623_id);
+
+static struct i2c_driver ncp5623_i2c_driver = {
+	.driver	= {
+		.name = "ncp5623",
+		.of_match_table = ncp5623_id,
+	},
+	.probe = ncp5623_probe,
+	.remove = ncp5623_remove,
+	.shutdown = ncp5623_shutdown,
+};
+
+module_i2c_driver(ncp5623_i2c_driver);
+
+MODULE_AUTHOR("Abdel Alkuor <alkuor@gmail.com>");
+MODULE_DESCRIPTION("NCP5623 Multi-LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 156b73d1f4..6bdc5b923f 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -8,11 +8,13 @@
 #include <linux/bitfield.h>
 #include <linux/led-class-multicolor.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/soc/qcom/qcom-pbs.h>
 
 #define LPG_SUBTYPE_REG		0x05
 #define  LPG_SUBTYPE_LPG	0x2
@@ -39,6 +41,10 @@
 #define PWM_SEC_ACCESS_REG	0xd0
 #define PWM_DTEST_REG(x)	(0xe2 + (x) - 1)
 
+#define SDAM_REG_PBS_SEQ_EN		0x42
+#define SDAM_PBS_TRIG_SET		0xe5
+#define SDAM_PBS_TRIG_CLR		0xe6
+
 #define TRI_LED_SRC_SEL		0x45
 #define TRI_LED_EN_CTL		0x46
 #define TRI_LED_ATC_CTL		0x47
@@ -48,9 +54,31 @@
 
 #define LPG_RESOLUTION_9BIT	BIT(9)
 #define LPG_RESOLUTION_15BIT	BIT(15)
+#define PPG_MAX_LED_BRIGHTNESS	255
+
 #define LPG_MAX_M		7
 #define LPG_MAX_PREDIV		6
 
+#define DEFAULT_TICK_DURATION_US	7800
+#define RAMP_STEP_DURATION(x)		(((x) * 1000 / DEFAULT_TICK_DURATION_US) & 0xff)
+
+#define SDAM_MAX_DEVICES	2
+/* LPG common config settings for PPG */
+#define SDAM_START_BASE			0x40
+#define SDAM_REG_RAMP_STEP_DURATION		0x47
+
+#define SDAM_LUT_SDAM_LUT_PATTERN_OFFSET	0x45
+#define SDAM_LPG_SDAM_LUT_PATTERN_OFFSET	0x80
+
+/* LPG per channel config settings for PPG */
+#define SDAM_LUT_EN_OFFSET			0x0
+#define SDAM_PATTERN_CONFIG_OFFSET		0x1
+#define SDAM_END_INDEX_OFFSET			0x3
+#define SDAM_START_INDEX_OFFSET		0x4
+#define SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET	0x6
+#define SDAM_PAUSE_HI_MULTIPLIER_OFFSET	0x8
+#define SDAM_PAUSE_LO_MULTIPLIER_OFFSET	0x9
+
 struct lpg_channel;
 struct lpg_data;
 
@@ -64,6 +92,10 @@ struct lpg_data;
  * @lut_base:	base address of the LUT block (optional)
  * @lut_size:	number of entries in the LUT block
  * @lut_bitmap:	allocation bitmap for LUT entries
+ * @pbs_dev:	PBS device
+ * @lpg_chan_sdam:	LPG SDAM peripheral device
+ * @lut_sdam:	LUT SDAM peripheral device
+ * @pbs_en_bitmap:	bitmap for tracking PBS triggers
  * @triled_base: base address of the TRILED block (optional)
  * @triled_src:	power-source for the TRILED
  * @triled_has_atc_ctl:	true if there is TRI_LED_ATC_CTL register
@@ -77,7 +109,7 @@ struct lpg {
 
 	struct mutex lock;
 
-	struct pwm_chip pwm;
+	struct pwm_chip *pwm;
 
 	const struct lpg_data *data;
 
@@ -85,6 +117,11 @@ struct lpg {
 	u32 lut_size;
 	unsigned long *lut_bitmap;
 
+	struct pbs_dev *pbs_dev;
+	struct nvmem_device *lpg_chan_sdam;
+	struct nvmem_device *lut_sdam;
+	unsigned long pbs_en_bitmap;
+
 	u32 triled_base;
 	u32 triled_src;
 	bool triled_has_atc_ctl;
@@ -101,6 +138,7 @@ struct lpg {
  * @triled_mask: mask in TRILED to enable this channel
  * @lut_mask:	mask in LUT to start pattern generator for this channel
  * @subtype:	PMIC hardware block subtype
+ * @sdam_offset:	channel offset in LPG SDAM
  * @in_use:	channel is exposed to LED framework
  * @color:	color of the LED attached to this channel
  * @dtest_line:	DTEST line for output, or 0 if disabled
@@ -129,6 +167,7 @@ struct lpg_channel {
 	unsigned int triled_mask;
 	unsigned int lut_mask;
 	unsigned int subtype;
+	u32 sdam_offset;
 
 	bool in_use;
 
@@ -178,10 +217,12 @@ struct lpg_led {
 
 /**
  * struct lpg_channel_data - per channel initialization data
+ * @sdam_offset:	Channel offset in LPG SDAM
  * @base:		base address for PWM channel registers
  * @triled_mask:	bitmask for controlling this channel in TRILED
  */
 struct lpg_channel_data {
+	unsigned int sdam_offset;
 	unsigned int base;
 	u8 triled_mask;
 };
@@ -206,6 +247,65 @@ struct lpg_data {
 	const struct lpg_channel_data *channels;
 };
 
+#define PBS_SW_TRIG_BIT		BIT(0)
+
+static int lpg_clear_pbs_trigger(struct lpg *lpg, unsigned int lut_mask)
+{
+	u8 val = 0;
+	int rc;
+
+	lpg->pbs_en_bitmap &= (~lut_mask);
+	if (!lpg->pbs_en_bitmap) {
+		rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
+		if (rc < 0)
+			return rc;
+
+		if (lpg->lut_sdam) {
+			val = PBS_SW_TRIG_BIT;
+			rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_PBS_TRIG_CLR, 1, &val);
+			if (rc < 0)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
+static int lpg_set_pbs_trigger(struct lpg *lpg, unsigned int lut_mask)
+{
+	u8 val = PBS_SW_TRIG_BIT;
+	int rc;
+
+	if (!lpg->pbs_en_bitmap) {
+		rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val);
+		if (rc < 0)
+			return rc;
+
+		if (lpg->lut_sdam) {
+			rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_PBS_TRIG_SET, 1, &val);
+			if (rc < 0)
+				return rc;
+		} else {
+			rc = qcom_pbs_trigger_event(lpg->pbs_dev, val);
+			if (rc < 0)
+				return rc;
+		}
+	}
+	lpg->pbs_en_bitmap |= lut_mask;
+
+	return 0;
+}
+
+static int lpg_sdam_configure_triggers(struct lpg_channel *chan, u8 set_trig)
+{
+	u32 addr = SDAM_LUT_EN_OFFSET + chan->sdam_offset;
+
+	if (!chan->lpg->lpg_chan_sdam)
+		return 0;
+
+	return nvmem_device_write(chan->lpg->lpg_chan_sdam, addr, 1, &set_trig);
+}
+
 static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable)
 {
 	/* Skip if we don't have a triled block */
@@ -216,6 +316,47 @@ static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable)
 				  mask, enable);
 }
 
+static int lpg_lut_store_sdam(struct lpg *lpg, struct led_pattern *pattern,
+			 size_t len, unsigned int *lo_idx, unsigned int *hi_idx)
+{
+	unsigned int idx;
+	u8 brightness;
+	int i, rc;
+	u16 addr;
+
+	if (len > lpg->lut_size) {
+		dev_err(lpg->dev, "Pattern length (%zu) exceeds maximum pattern length (%d)\n",
+			len, lpg->lut_size);
+		return -EINVAL;
+	}
+
+	idx = bitmap_find_next_zero_area(lpg->lut_bitmap, lpg->lut_size, 0, len, 0);
+	if (idx >= lpg->lut_size)
+		return -ENOSPC;
+
+	for (i = 0; i < len; i++) {
+		brightness = pattern[i].brightness;
+
+		if (lpg->lut_sdam) {
+			addr = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET + i + idx;
+			rc = nvmem_device_write(lpg->lut_sdam, addr, 1, &brightness);
+		} else {
+			addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx;
+			rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness);
+		}
+
+		if (rc < 0)
+			return rc;
+	}
+
+	bitmap_set(lpg->lut_bitmap, idx, len);
+
+	*lo_idx = idx;
+	*hi_idx = idx + len - 1;
+
+	return 0;
+}
+
 static int lpg_lut_store(struct lpg *lpg, struct led_pattern *pattern,
 			 size_t len, unsigned int *lo_idx, unsigned int *hi_idx)
 {
@@ -256,6 +397,9 @@ static void lpg_lut_free(struct lpg *lpg, unsigned int lo_idx, unsigned int hi_i
 
 static int lpg_lut_sync(struct lpg *lpg, unsigned int mask)
 {
+	if (!lpg->lut_base)
+		return 0;
+
 	return regmap_write(lpg->map, lpg->lut_base + RAMP_CONTROL_REG, mask);
 }
 
@@ -462,6 +606,49 @@ static void lpg_apply_pwm_value(struct lpg_channel *chan)
 #define LPG_PATTERN_CONFIG_PAUSE_HI	BIT(1)
 #define LPG_PATTERN_CONFIG_PAUSE_LO	BIT(0)
 
+static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
+{
+	struct nvmem_device *lpg_chan_sdam = chan->lpg->lpg_chan_sdam;
+	unsigned int lo_idx = chan->pattern_lo_idx;
+	unsigned int hi_idx = chan->pattern_hi_idx;
+	u8 val = 0, conf = 0, lut_offset = 0;
+	unsigned int hi_pause, lo_pause;
+	struct lpg *lpg = chan->lpg;
+
+	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
+		return;
+
+	hi_pause = DIV_ROUND_UP(chan->ramp_hi_pause_ms, chan->ramp_tick_ms);
+	lo_pause = DIV_ROUND_UP(chan->ramp_lo_pause_ms, chan->ramp_tick_ms);
+
+	if (!chan->ramp_oneshot)
+		conf |= LPG_PATTERN_CONFIG_REPEAT;
+	if (chan->ramp_hi_pause_ms && lpg->lut_sdam)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_HI;
+	if (chan->ramp_lo_pause_ms && lpg->lut_sdam)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_LO;
+
+	if (lpg->lut_sdam) {
+		lut_offset = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET - SDAM_START_BASE;
+		hi_idx += lut_offset;
+		lo_idx += lut_offset;
+	}
+
+	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
+	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
+	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
+	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
+
+	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
+	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
+
+	if (lpg->lut_sdam) {
+		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
+		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
+	}
+
+}
+
 static void lpg_apply_lut_control(struct lpg_channel *chan)
 {
 	struct lpg *lpg = chan->lpg;
@@ -596,7 +783,10 @@ static void lpg_apply(struct lpg_channel *chan)
 	lpg_apply_pwm_value(chan);
 	lpg_apply_control(chan);
 	lpg_apply_sync(chan);
-	lpg_apply_lut_control(chan);
+	if (chan->lpg->lpg_chan_sdam)
+		lpg_sdam_apply_lut_control(chan);
+	else
+		lpg_apply_lut_control(chan);
 	lpg_enable_glitch(chan);
 }
 
@@ -621,6 +811,7 @@ static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev,
 			chan->ramp_enabled = false;
 		} else if (chan->pattern_lo_idx != chan->pattern_hi_idx) {
 			lpg_calc_freq(chan, NSEC_PER_MSEC);
+			lpg_sdam_configure_triggers(chan, 1);
 
 			chan->enabled = true;
 			chan->ramp_enabled = true;
@@ -648,8 +839,10 @@ static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev,
 		triled_set(lpg, triled_mask, triled_enabled);
 
 	/* Trigger start of ramp generator(s) */
-	if (lut_mask)
+	if (lut_mask) {
 		lpg_lut_sync(lpg, lut_mask);
+		lpg_set_pbs_trigger(lpg, lut_mask);
+	}
 }
 
 static int lpg_brightness_single_set(struct led_classdev *cdev,
@@ -766,9 +959,9 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 	struct led_pattern *pattern;
 	unsigned int brightness_a;
 	unsigned int brightness_b;
+	unsigned int hi_pause = 0;
+	unsigned int lo_pause = 0;
 	unsigned int actual_len;
-	unsigned int hi_pause;
-	unsigned int lo_pause;
 	unsigned int delta_t;
 	unsigned int lo_idx;
 	unsigned int hi_idx;
@@ -835,18 +1028,24 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 	 * If the specified pattern is a palindrome the ping pong mode is
 	 * enabled. In this scenario the delta_t of the middle entry (i.e. the
 	 * last in the programmed pattern) determines the "high pause".
+	 *
+	 * SDAM-based devices do not support "ping pong", and only supports
+	 * "low pause" and "high pause" with a dedicated SDAM LUT.
 	 */
 
 	/* Detect palindromes and use "ping pong" to reduce LUT usage */
-	for (i = 0; i < len / 2; i++) {
-		brightness_a = pattern[i].brightness;
-		brightness_b = pattern[len - i - 1].brightness;
-
-		if (brightness_a != brightness_b) {
-			ping_pong = false;
-			break;
+	if (lpg->lut_base) {
+		for (i = 0; i < len / 2; i++) {
+			brightness_a = pattern[i].brightness;
+			brightness_b = pattern[len - i - 1].brightness;
+
+			if (brightness_a != brightness_b) {
+				ping_pong = false;
+				break;
+			}
 		}
-	}
+	} else
+		ping_pong = false;
 
 	/* The pattern length to be written to the LUT */
 	if (ping_pong)
@@ -874,12 +1073,27 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
 	if (delta_t >= BIT(9))
 		goto out_free_pattern;
 
-	/* Find "low pause" and "high pause" in the pattern */
-	lo_pause = pattern[0].delta_t;
-	hi_pause = pattern[actual_len - 1].delta_t;
+	/*
+	 * Find "low pause" and "high pause" in the pattern in the LUT case.
+	 * SDAM-based devices without dedicated LUT SDAM require equal
+	 * duration of all steps.
+	 */
+	if (lpg->lut_base || lpg->lut_sdam) {
+		lo_pause = pattern[0].delta_t;
+		hi_pause = pattern[actual_len - 1].delta_t;
+	} else {
+		if (delta_t != pattern[0].delta_t || delta_t != pattern[actual_len - 1].delta_t)
+			goto out_free_pattern;
+	}
+
 
 	mutex_lock(&lpg->lock);
-	ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+
+	if (lpg->lut_base)
+		ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+	else
+		ret = lpg_lut_store_sdam(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+
 	if (ret < 0)
 		goto out_unlock;
 
@@ -927,7 +1141,12 @@ static int lpg_pattern_mc_set(struct led_classdev *cdev,
 {
 	struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
 	struct lpg_led *led = container_of(mc, struct lpg_led, mcdev);
-	int ret;
+	unsigned int triled_mask = 0;
+	int ret, i;
+
+	for (i = 0; i < led->num_channels; i++)
+		triled_mask |= led->channels[i]->triled_mask;
+	triled_set(led->lpg, triled_mask, 0);
 
 	ret = lpg_pattern_set(led, pattern, len, repeat);
 	if (ret < 0)
@@ -952,6 +1171,8 @@ static int lpg_pattern_clear(struct lpg_led *led)
 
 	for (i = 0; i < led->num_channels; i++) {
 		chan = led->channels[i];
+		lpg_sdam_configure_triggers(chan, 0);
+		lpg_clear_pbs_trigger(chan->lpg, chan->lut_mask);
 		chan->pattern_lo_idx = 0;
 		chan->pattern_hi_idx = 0;
 	}
@@ -978,7 +1199,7 @@ static int lpg_pattern_mc_clear(struct led_classdev *cdev)
 
 static inline struct lpg *lpg_pwm_from_chip(struct pwm_chip *chip)
 {
-	return container_of(chip, struct lpg, pwm);
+	return pwmchip_get_drvdata(chip);
 }
 
 static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -1093,13 +1314,17 @@ static const struct pwm_ops lpg_pwm_ops = {
 
 static int lpg_add_pwm(struct lpg *lpg)
 {
+	struct pwm_chip *chip;
 	int ret;
 
-	lpg->pwm.dev = lpg->dev;
-	lpg->pwm.npwm = lpg->num_channels;
-	lpg->pwm.ops = &lpg_pwm_ops;
+	lpg->pwm = chip = devm_pwmchip_alloc(lpg->dev, lpg->num_channels, 0);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	chip->ops = &lpg_pwm_ops;
+	pwmchip_set_drvdata(chip, lpg);
 
-	ret = devm_pwmchip_add(lpg->dev, &lpg->pwm);
+	ret = devm_pwmchip_add(lpg->dev, chip);
 	if (ret)
 		dev_err_probe(lpg->dev, ret, "failed to add PWM chip\n");
 
@@ -1187,8 +1412,8 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 		cdev->brightness_set_blocking = lpg_brightness_mc_set;
 		cdev->blink_set = lpg_blink_mc_set;
 
-		/* Register pattern accessors only if we have a LUT block */
-		if (lpg->lut_base) {
+		/* Register pattern accessors if we have a LUT block or when using PPG */
+		if (lpg->lut_base || lpg->lpg_chan_sdam) {
 			cdev->pattern_set = lpg_pattern_mc_set;
 			cdev->pattern_clear = lpg_pattern_mc_clear;
 		}
@@ -1201,15 +1426,19 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 		cdev->brightness_set_blocking = lpg_brightness_single_set;
 		cdev->blink_set = lpg_blink_single_set;
 
-		/* Register pattern accessors only if we have a LUT block */
-		if (lpg->lut_base) {
+		/* Register pattern accessors if we have a LUT block or when using PPG */
+		if (lpg->lut_base || lpg->lpg_chan_sdam) {
 			cdev->pattern_set = lpg_pattern_single_set;
 			cdev->pattern_clear = lpg_pattern_single_clear;
 		}
 	}
 
 	cdev->default_trigger = of_get_property(np, "linux,default-trigger", NULL);
-	cdev->max_brightness = LPG_RESOLUTION_9BIT - 1;
+
+	if (lpg->lpg_chan_sdam)
+		cdev->max_brightness = PPG_MAX_LED_BRIGHTNESS;
+	else
+		cdev->max_brightness = LPG_RESOLUTION_9BIT - 1;
 
 	if (!of_property_read_string(np, "default-state", &state) &&
 	    !strcmp(state, "on"))
@@ -1250,6 +1479,7 @@ static int lpg_init_channels(struct lpg *lpg)
 		chan->base = data->channels[i].base;
 		chan->triled_mask = data->channels[i].triled_mask;
 		chan->lut_mask = BIT(i);
+		chan->sdam_offset = data->channels[i].sdam_offset;
 
 		regmap_read(lpg->map, chan->base + LPG_SUBTYPE_REG, &chan->subtype);
 	}
@@ -1295,11 +1525,12 @@ static int lpg_init_lut(struct lpg *lpg)
 {
 	const struct lpg_data *data = lpg->data;
 
-	if (!data->lut_base)
+	if (!data->lut_size)
 		return 0;
 
-	lpg->lut_base = data->lut_base;
 	lpg->lut_size = data->lut_size;
+	if (data->lut_base)
+		lpg->lut_base = data->lut_base;
 
 	lpg->lut_bitmap = devm_bitmap_zalloc(lpg->dev, lpg->lut_size, GFP_KERNEL);
 	if (!lpg->lut_bitmap)
@@ -1308,6 +1539,59 @@ static int lpg_init_lut(struct lpg *lpg)
 	return 0;
 }
 
+static int lpg_init_sdam(struct lpg *lpg)
+{
+	int i, sdam_count, rc;
+	u8 val = 0;
+
+	sdam_count = of_property_count_strings(lpg->dev->of_node, "nvmem-names");
+	if (sdam_count <= 0)
+		return 0;
+	if (sdam_count > SDAM_MAX_DEVICES)
+		return -EINVAL;
+
+	/* Get the 1st SDAM device for LPG/LUT config */
+	lpg->lpg_chan_sdam = devm_nvmem_device_get(lpg->dev, "lpg_chan_sdam");
+	if (IS_ERR(lpg->lpg_chan_sdam))
+		return dev_err_probe(lpg->dev, PTR_ERR(lpg->lpg_chan_sdam),
+				"Failed to get LPG chan SDAM device\n");
+
+	if (sdam_count == 1) {
+		/* Get PBS device node if single SDAM device */
+		lpg->pbs_dev = get_pbs_client_device(lpg->dev);
+		if (IS_ERR(lpg->pbs_dev))
+			return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev),
+					"Failed to get PBS client device\n");
+	} else if (sdam_count == 2) {
+		/* Get the 2nd SDAM device for LUT pattern */
+		lpg->lut_sdam = devm_nvmem_device_get(lpg->dev, "lut_sdam");
+		if (IS_ERR(lpg->lut_sdam))
+			return dev_err_probe(lpg->dev, PTR_ERR(lpg->lut_sdam),
+					"Failed to get LPG LUT SDAM device\n");
+	}
+
+	for (i = 0; i < lpg->num_channels; i++) {
+		struct lpg_channel *chan = &lpg->channels[i];
+
+		if (chan->sdam_offset) {
+			rc = nvmem_device_write(lpg->lpg_chan_sdam,
+				SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
+			if (rc < 0)
+				return rc;
+
+			rc = lpg_sdam_configure_triggers(chan, 0);
+			if (rc < 0)
+				return rc;
+
+			rc = lpg_clear_pbs_trigger(chan->lpg, chan->lut_mask);
+			if (rc < 0)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
 static int lpg_probe(struct platform_device *pdev)
 {
 	struct device_node *np;
@@ -1342,6 +1626,10 @@ static int lpg_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	ret = lpg_init_sdam(lpg);
+	if (ret < 0)
+		return ret;
+
 	ret = lpg_init_lut(lpg);
 	if (ret < 0)
 		return ret;
@@ -1360,6 +1648,23 @@ static int lpg_probe(struct platform_device *pdev)
 	return lpg_add_pwm(lpg);
 }
 
+static const struct lpg_data pm660l_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 49,
+
+	.triled_base = 0xd000,
+	.triled_has_atc_ctl = true,
+	.triled_has_src_sel = true,
+
+	.num_channels = 4,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100, .triled_mask = BIT(5) },
+		{ .base = 0xb200, .triled_mask = BIT(6) },
+		{ .base = 0xb300, .triled_mask = BIT(7) },
+		{ .base = 0xb400 },
+	},
+};
+
 static const struct lpg_data pm8916_pwm_data = {
 	.num_channels = 1,
 	.channels = (const struct lpg_channel_data[]) {
@@ -1407,11 +1712,13 @@ static const struct lpg_data pm8994_lpg_data = {
 static const struct lpg_data pmi632_lpg_data = {
 	.triled_base = 0xd000,
 
+	.lut_size = 64,
+
 	.num_channels = 5,
 	.channels = (const struct lpg_channel_data[]) {
-		{ .base = 0xb300, .triled_mask = BIT(7) },
-		{ .base = 0xb400, .triled_mask = BIT(6) },
-		{ .base = 0xb500, .triled_mask = BIT(5) },
+		{ .base = 0xb300, .triled_mask = BIT(7), .sdam_offset = 0x48 },
+		{ .base = 0xb400, .triled_mask = BIT(6), .sdam_offset = 0x56 },
+		{ .base = 0xb500, .triled_mask = BIT(5), .sdam_offset = 0x64 },
 		{ .base = 0xb600 },
 		{ .base = 0xb700 },
 	},
@@ -1484,11 +1791,13 @@ static const struct lpg_data pm8150l_lpg_data = {
 static const struct lpg_data pm8350c_pwm_data = {
 	.triled_base = 0xef00,
 
+	.lut_size = 122,
+
 	.num_channels = 4,
 	.channels = (const struct lpg_channel_data[]) {
-		{ .base = 0xe800, .triled_mask = BIT(7) },
-		{ .base = 0xe900, .triled_mask = BIT(6) },
-		{ .base = 0xea00, .triled_mask = BIT(5) },
+		{ .base = 0xe800, .triled_mask = BIT(7), .sdam_offset = 0x48 },
+		{ .base = 0xe900, .triled_mask = BIT(6), .sdam_offset = 0x56 },
+		{ .base = 0xea00, .triled_mask = BIT(5), .sdam_offset = 0x64 },
 		{ .base = 0xeb00 },
 	},
 };
@@ -1502,6 +1811,7 @@ static const struct lpg_data pmk8550_pwm_data = {
 };
 
 static const struct of_device_id lpg_of_table[] = {
+	{ .compatible = "qcom,pm660l-lpg", .data = &pm660l_lpg_data },
 	{ .compatible = "qcom,pm8150b-lpg", .data = &pm8150b_lpg_data },
 	{ .compatible = "qcom,pm8150l-lpg", .data = &pm8150l_lpg_data },
 	{ .compatible = "qcom,pm8350c-pwm", .data = &pm8350c_pwm_data },
diff --git a/drivers/leds/trigger/ledtrig-audio.c b/drivers/leds/trigger/ledtrig-audio.c
index c6b437e636..2ecd4b760f 100644
--- a/drivers/leds/trigger/ledtrig-audio.c
+++ b/drivers/leds/trigger/ledtrig-audio.c
@@ -63,3 +63,5 @@ module_exit(ledtrig_audio_exit);
 
 MODULE_DESCRIPTION("LED trigger for audio mute control");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ledtrig:audio-mute");
+MODULE_ALIAS("ledtrig:audio-micmute");
diff --git a/drivers/leds/trigger/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
index 8207f85ece..8678e64a5c 100644
--- a/drivers/leds/trigger/ledtrig-default-on.c
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -28,3 +28,4 @@ module_led_trigger(defon_led_trigger);
 MODULE_AUTHOR("Nick Forbes <nick.forbes@incepta.com>");
 MODULE_DESCRIPTION("Default-ON LED trigger");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ledtrig:default-on");
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index df1b1d8468..ea00f6c708 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -18,10 +18,12 @@
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/linkmode.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/mutex.h>
+#include <linux/phy.h>
 #include <linux/rtnetlink.h>
 #include <linux/timer.h>
 #include "../leds.h"
@@ -65,12 +67,15 @@ struct led_netdev_data {
 
 	unsigned long mode;
 	int link_speed;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_link_modes);
 	u8 duplex;
 
 	bool carrier_link_up;
 	bool hw_control;
 };
 
+static const struct attribute_group netdev_trig_link_speed_attrs_group;
+
 static void set_baseline_state(struct led_netdev_data *trigger_data)
 {
 	int current_brightness;
@@ -218,13 +223,20 @@ static void get_device_state(struct led_netdev_data *trigger_data)
 	struct ethtool_link_ksettings cmd;
 
 	trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
-	if (!trigger_data->carrier_link_up)
+
+	if (__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
 		return;
 
-	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) {
+	if (trigger_data->carrier_link_up) {
 		trigger_data->link_speed = cmd.base.speed;
 		trigger_data->duplex = cmd.base.duplex;
 	}
+
+	/*
+	 * Have a local copy of the link speed supported to avoid rtnl lock every time
+	 * modes are refreshed on any change event
+	 */
+	linkmode_copy(trigger_data->supported_link_modes, cmd.link_modes.supported);
 }
 
 static ssize_t device_name_show(struct device *dev,
@@ -277,7 +289,10 @@ static int set_device_name(struct led_netdev_data *trigger_data,
 
 	trigger_data->last_activity = 0;
 
-	set_baseline_state(trigger_data);
+	/* Skip if we're called from netdev_trig_activate() and hw_control is true */
+	if (!trigger_data->hw_control || led_get_trigger_data(trigger_data->led_cdev))
+		set_baseline_state(trigger_data);
+
 	mutex_unlock(&trigger_data->lock);
 	rtnl_unlock();
 
@@ -295,6 +310,10 @@ static ssize_t device_name_store(struct device *dev,
 
 	if (ret < 0)
 		return ret;
+
+	/* Refresh link_speed visibility */
+	sysfs_update_group(&dev->kobj, &netdev_trig_link_speed_attrs_group);
+
 	return size;
 }
 
@@ -458,15 +477,63 @@ static ssize_t offloaded_show(struct device *dev,
 
 static DEVICE_ATTR_RO(offloaded);
 
-static struct attribute *netdev_trig_attrs[] = {
-	&dev_attr_device_name.attr,
-	&dev_attr_link.attr,
+#define CHECK_LINK_MODE_ATTR(link_speed) \
+	do { \
+		if (attr == &dev_attr_link_##link_speed.attr && \
+		    link_ksettings.base.speed == SPEED_##link_speed) \
+			return attr->mode; \
+	} while (0)
+
+static umode_t netdev_trig_link_speed_visible(struct kobject *kobj,
+					      struct attribute *attr, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct led_netdev_data *trigger_data;
+	unsigned long *supported_link_modes;
+	u32 mode;
+
+	trigger_data = led_trigger_get_drvdata(dev);
+	supported_link_modes = trigger_data->supported_link_modes;
+
+	/*
+	 * Search in the supported link mode mask a matching supported mode.
+	 * Stop at the first matching entry as we care only to check if a particular
+	 * speed is supported and not the kind.
+	 */
+	for_each_set_bit(mode, supported_link_modes, __ETHTOOL_LINK_MODE_MASK_NBITS) {
+		struct ethtool_link_ksettings link_ksettings;
+
+		ethtool_params_from_link_mode(&link_ksettings, mode);
+
+		CHECK_LINK_MODE_ATTR(10);
+		CHECK_LINK_MODE_ATTR(100);
+		CHECK_LINK_MODE_ATTR(1000);
+		CHECK_LINK_MODE_ATTR(2500);
+		CHECK_LINK_MODE_ATTR(5000);
+		CHECK_LINK_MODE_ATTR(10000);
+	}
+
+	return 0;
+}
+
+static struct attribute *netdev_trig_link_speed_attrs[] = {
 	&dev_attr_link_10.attr,
 	&dev_attr_link_100.attr,
 	&dev_attr_link_1000.attr,
 	&dev_attr_link_2500.attr,
 	&dev_attr_link_5000.attr,
 	&dev_attr_link_10000.attr,
+	NULL
+};
+
+static const struct attribute_group netdev_trig_link_speed_attrs_group = {
+	.attrs = netdev_trig_link_speed_attrs,
+	.is_visible = netdev_trig_link_speed_visible,
+};
+
+static struct attribute *netdev_trig_attrs[] = {
+	&dev_attr_device_name.attr,
+	&dev_attr_link.attr,
 	&dev_attr_full_duplex.attr,
 	&dev_attr_half_duplex.attr,
 	&dev_attr_rx.attr,
@@ -475,7 +542,16 @@ static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_offloaded.attr,
 	NULL
 };
-ATTRIBUTE_GROUPS(netdev_trig);
+
+static const struct attribute_group netdev_trig_attrs_group = {
+	.attrs = netdev_trig_attrs,
+};
+
+static const struct attribute_group *netdev_trig_groups[] = {
+	&netdev_trig_attrs_group,
+	&netdev_trig_link_speed_attrs_group,
+	NULL,
+};
 
 static int netdev_trig_notify(struct notifier_block *nb,
 			      unsigned long evt, void *dv)
@@ -484,6 +560,7 @@ static int netdev_trig_notify(struct notifier_block *nb,
 		netdev_notifier_info_to_dev((struct netdev_notifier_info *)dv);
 	struct led_netdev_data *trigger_data =
 		container_of(nb, struct led_netdev_data, notifier);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
 
 	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
 	    && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
@@ -518,6 +595,10 @@ static int netdev_trig_notify(struct notifier_block *nb,
 	case NETDEV_UP:
 	case NETDEV_CHANGE:
 		get_device_state(trigger_data);
+		/* Refresh link_speed visibility */
+		if (evt == NETDEV_CHANGE)
+			sysfs_update_group(&led_cdev->dev->kobj,
+					   &netdev_trig_link_speed_attrs_group);
 		break;
 	}
 
@@ -617,8 +698,8 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
 		if (dev) {
 			const char *name = dev_name(dev);
 
-			set_device_name(trigger_data, name, strlen(name));
 			trigger_data->hw_control = true;
+			set_device_name(trigger_data, name, strlen(name));
 
 			rc = led_cdev->hw_control_get(led_cdev, &mode);
 			if (!rc)
@@ -663,3 +744,4 @@ MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
 MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
 MODULE_DESCRIPTION("Netdev LED trigger");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ledtrig:netdev");
diff --git a/drivers/leds/trigger/ledtrig-panic.c b/drivers/leds/trigger/ledtrig-panic.c
index 5a6b21bfeb..1d49c10780 100644
--- a/drivers/leds/trigger/ledtrig-panic.c
+++ b/drivers/leds/trigger/ledtrig-panic.c
@@ -21,24 +21,15 @@ static struct led_trigger *trigger;
  */
 static void led_trigger_set_panic(struct led_classdev *led_cdev)
 {
-	struct led_trigger *trig;
+	if (led_cdev->trigger)
+		list_del(&led_cdev->trig_list);
+	list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
 
-	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (strcmp("panic", trig->name))
-			continue;
-		if (led_cdev->trigger)
-			list_del(&led_cdev->trig_list);
-		list_add_tail(&led_cdev->trig_list, &trig->led_cdevs);
+	/* Avoid the delayed blink path */
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
 
-		/* Avoid the delayed blink path */
-		led_cdev->blink_delay_on = 0;
-		led_cdev->blink_delay_off = 0;
-
-		led_cdev->trigger = trig;
-		if (trig->activate)
-			trig->activate(led_cdev);
-		break;
-	}
+	led_cdev->trigger = trigger;
 }
 
 static int led_trigger_panic_notifier(struct notifier_block *nb,