Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 120 insertions, 0 deletions

diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
new file mode 100644
index 0000000000..b672d3142e
--- /dev/null
+++ b/drivers/media/cec/platform/Kconfig
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Platform drivers
+
+config CEC_CROS_EC
+	tristate "ChromeOS EC CEC driver"
+	depends on CROS_EC
+	select CEC_CORE
+	select CEC_NOTIFIER
+	select CROS_EC_PROTO
+	help
+	  If you say yes here you will get support for the
+	  ChromeOS Embedded Controller's CEC.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_MESON_AO
+	tristate "Amlogic Meson AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+
+config CEC_MESON_G12A_AO
+	tristate "Amlogic Meson G12A AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on COMMON_CLK && OF
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
+	  This driver if for the new AO-CEC module found in G12A SoCs,
+	  usually named AO_CEC_B in documentation.
+	  It uses the generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_GPIO
+	tristate "Generic GPIO-based CEC driver"
+	depends on PREEMPTION || COMPILE_TEST
+	select CEC_CORE
+	select CEC_PIN
+	select CEC_NOTIFIER
+	select GPIOLIB
+	help
+	  This is a generic GPIO-based CEC driver.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SAMSUNG_S5P
+	tristate "Samsung S5P CEC driver"
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_STI
+	tristate "STMicroelectronics STiH4xx HDMI CEC driver"
+	depends on ARCH_STI || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for STIH4xx HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_STM32
+	tristate "STMicroelectronics STM32 HDMI CEC driver"
+	depends on ARCH_STM32 || COMPILE_TEST
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	help
+	  This is a driver for STM32 interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_TEGRA
+	tristate "Tegra HDMI CEC driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for the Tegra HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SECO
+	tristate "SECO Boards HDMI CEC driver"
+	depends on (X86 || IA64) || COMPILE_TEST
+	depends on PCI && DMI
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for SECO Boards integrated CEC interface.
+	  Selecting it will enable support for this device.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SECO_RC
+	bool "SECO Boards IR RC5 support"
+	depends on CEC_SECO
+	depends on RC_CORE=y || RC_CORE = CEC_SECO
+	help
+	  If you say yes here you will get support for the
+	  SECO Boards Consumer-IR in seco-cec driver.
+	  The embedded controller supports RC5 protocol only, default mapping
+	  is set to rc-hauppauge.