Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 312 insertions, 87 deletions

diff --git a/drivers/media/cec/core/cec-adap.c b/drivers/media/cec/core/cec-adap.c
index 09ca83c233..6bb49bb3f9 100644
--- a/drivers/media/cec/core/cec-adap.c
+++ b/drivers/media/cec/core/cec-adap.c
@@ -1688,6 +1688,11 @@ void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
 }
 EXPORT_SYMBOL_GPL(cec_s_phys_addr);
 
+/*
+ * Note: In the drm subsystem, prefer calling (if possible):
+ *
+ * cec_s_phys_addr(adap, connector->display_info.source_physical_address, false);
+ */
 void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
 			       const struct edid *edid)
 {
diff --git a/drivers/media/cec/core/cec-notifier.c b/drivers/media/cec/core/cec-notifier.c
index a41f24172b..1fed0b1c71 100644
--- a/drivers/media/cec/core/cec-notifier.c
+++ b/drivers/media/cec/core/cec-notifier.c
@@ -196,6 +196,11 @@ void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa)
 }
 EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr);
 
+/*
+ * Note: In the drm subsystem, prefer calling (if possible):
+ *
+ * cec_notifier_set_phys_addr(n, connector->display_info.source_physical_address);
+ */
 void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n,
 					  const struct edid *edid)
 {
diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
index b672d3142e..ede81fe331 100644
--- a/drivers/media/cec/platform/Kconfig
+++ b/drivers/media/cec/platform/Kconfig
@@ -99,7 +99,7 @@ config CEC_TEGRA
 
 config CEC_SECO
 	tristate "SECO Boards HDMI CEC driver"
-	depends on (X86 || IA64) || COMPILE_TEST
+	depends on X86 || COMPILE_TEST
 	depends on PCI && DMI
 	select CEC_CORE
 	select CEC_NOTIFIER
diff --git a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
index c17faf0028..42dde3f0db 100644
--- a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
+++ b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
@@ -22,50 +22,124 @@
 #define DRV_NAME	"cros-ec-cec"
 
 /**
- * struct cros_ec_cec - Driver data for EC CEC
+ * struct cros_ec_cec_port - Driver data for a single EC CEC port
  *
- * @cros_ec: Pointer to EC device
- * @notifier: Notifier info for responding to EC events
+ * @port_num: port number
  * @adap: CEC adapter
  * @notify: CEC notifier pointer
  * @rx_msg: storage for a received message
+ * @cros_ec_cec: pointer to the parent struct
  */
-struct cros_ec_cec {
-	struct cros_ec_device *cros_ec;
-	struct notifier_block notifier;
+struct cros_ec_cec_port {
+	int port_num;
 	struct cec_adapter *adap;
 	struct cec_notifier *notify;
 	struct cec_msg rx_msg;
+	struct cros_ec_cec *cros_ec_cec;
+};
+
+/**
+ * struct cros_ec_cec - Driver data for EC CEC
+ *
+ * @cros_ec: Pointer to EC device
+ * @notifier: Notifier info for responding to EC events
+ * @write_cmd_version: Highest supported version of EC_CMD_CEC_WRITE_MSG.
+ * @num_ports: Number of CEC ports
+ * @ports: Array of ports
+ */
+struct cros_ec_cec {
+	struct cros_ec_device *cros_ec;
+	struct notifier_block notifier;
+	int write_cmd_version;
+	int num_ports;
+	struct cros_ec_cec_port *ports[EC_CEC_MAX_PORTS];
 };
 
+static void cros_ec_cec_received_message(struct cros_ec_cec_port *port,
+					 uint8_t *msg, uint8_t len)
+{
+	if (len > CEC_MAX_MSG_SIZE)
+		len = CEC_MAX_MSG_SIZE;
+
+	port->rx_msg.len = len;
+	memcpy(port->rx_msg.msg, msg, len);
+
+	cec_received_msg(port->adap, &port->rx_msg);
+}
+
 static void handle_cec_message(struct cros_ec_cec *cros_ec_cec)
 {
 	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
 	uint8_t *cec_message = cros_ec->event_data.data.cec_message;
 	unsigned int len = cros_ec->event_size;
+	struct cros_ec_cec_port *port;
+	/*
+	 * There are two ways of receiving CEC messages:
+	 * 1. Old EC firmware which only supports one port sends the data in a
+	 *    cec_message MKBP event.
+	 * 2. New EC firmware which supports multiple ports uses
+	 *    EC_MKBP_CEC_HAVE_DATA to notify that data is ready and
+	 *    EC_CMD_CEC_READ_MSG to read it.
+	 * Check that the EC only has one CEC port, and then we can assume the
+	 * message is from port 0.
+	 */
+	if (cros_ec_cec->num_ports != 1) {
+		dev_err(cros_ec->dev,
+			"received cec_message on device with %d ports\n",
+			cros_ec_cec->num_ports);
+		return;
+	}
+	port = cros_ec_cec->ports[0];
 
-	if (len > CEC_MAX_MSG_SIZE)
-		len = CEC_MAX_MSG_SIZE;
-	cros_ec_cec->rx_msg.len = len;
-	memcpy(cros_ec_cec->rx_msg.msg, cec_message, len);
+	cros_ec_cec_received_message(port, cec_message, len);
+}
+
+static void cros_ec_cec_read_message(struct cros_ec_cec_port *port)
+{
+	struct cros_ec_device *cros_ec = port->cros_ec_cec->cros_ec;
+	struct ec_params_cec_read params = {
+		.port = port->port_num,
+	};
+	struct ec_response_cec_read response;
+	int ret;
 
-	cec_received_msg(cros_ec_cec->adap, &cros_ec_cec->rx_msg);
+	ret = cros_ec_cmd(cros_ec, 0, EC_CMD_CEC_READ_MSG, &params,
+			  sizeof(params), &response, sizeof(response));
+	if (ret < 0) {
+		dev_err(cros_ec->dev,
+			"error reading CEC message on EC: %d\n", ret);
+		return;
+	}
+
+	cros_ec_cec_received_message(port, response.msg, response.msg_len);
 }
 
 static void handle_cec_event(struct cros_ec_cec *cros_ec_cec)
 {
 	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	uint32_t events = cros_ec->event_data.data.cec_events;
+	uint32_t cec_events = cros_ec->event_data.data.cec_events;
+	uint32_t port_num = EC_MKBP_EVENT_CEC_GET_PORT(cec_events);
+	uint32_t events = EC_MKBP_EVENT_CEC_GET_EVENTS(cec_events);
+	struct cros_ec_cec_port *port;
+
+	if (port_num >= cros_ec_cec->num_ports) {
+		dev_err(cros_ec->dev,
+			"received CEC event for invalid port %d\n", port_num);
+		return;
+	}
+	port = cros_ec_cec->ports[port_num];
 
 	if (events & EC_MKBP_CEC_SEND_OK)
-		cec_transmit_attempt_done(cros_ec_cec->adap,
-					  CEC_TX_STATUS_OK);
+		cec_transmit_attempt_done(port->adap, CEC_TX_STATUS_OK);
 
 	/* FW takes care of all retries, tell core to avoid more retries */
 	if (events & EC_MKBP_CEC_SEND_FAILED)
-		cec_transmit_attempt_done(cros_ec_cec->adap,
+		cec_transmit_attempt_done(port->adap,
 					  CEC_TX_STATUS_MAX_RETRIES |
 					  CEC_TX_STATUS_NACK);
+
+	if (events & EC_MKBP_CEC_HAVE_DATA)
+		cros_ec_cec_read_message(port);
 }
 
 static int cros_ec_cec_event(struct notifier_block *nb,
@@ -93,20 +167,18 @@ static int cros_ec_cec_event(struct notifier_block *nb,
 
 static int cros_ec_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
 {
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_cec_port *port = adap->priv;
+	struct cros_ec_cec *cros_ec_cec = port->cros_ec_cec;
 	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_set data;
-	} __packed msg = {};
+	struct ec_params_cec_set params = {
+		.cmd = CEC_CMD_LOGICAL_ADDRESS,
+		.port = port->port_num,
+		.val = logical_addr,
+	};
 	int ret;
 
-	msg.msg.command = EC_CMD_CEC_SET;
-	msg.msg.outsize = sizeof(msg.data);
-	msg.data.cmd = CEC_CMD_LOGICAL_ADDRESS;
-	msg.data.val = logical_addr;
-
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
+	ret = cros_ec_cmd(cros_ec, 0, EC_CMD_CEC_SET, &params, sizeof(params),
+			  NULL, 0);
 	if (ret < 0) {
 		dev_err(cros_ec->dev,
 			"error setting CEC logical address on EC: %d\n", ret);
@@ -119,19 +191,26 @@ static int cros_ec_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
 static int cros_ec_cec_transmit(struct cec_adapter *adap, u8 attempts,
 				u32 signal_free_time, struct cec_msg *cec_msg)
 {
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_cec_port *port = adap->priv;
+	struct cros_ec_cec *cros_ec_cec = port->cros_ec_cec;
 	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_write data;
-	} __packed msg = {};
+	struct ec_params_cec_write params;
+	struct ec_params_cec_write_v1 params_v1;
 	int ret;
 
-	msg.msg.command = EC_CMD_CEC_WRITE_MSG;
-	msg.msg.outsize = cec_msg->len;
-	memcpy(msg.data.msg, cec_msg->msg, cec_msg->len);
+	if (cros_ec_cec->write_cmd_version == 0) {
+		memcpy(params.msg, cec_msg->msg, cec_msg->len);
+		ret = cros_ec_cmd(cros_ec, 0, EC_CMD_CEC_WRITE_MSG, &params,
+				  cec_msg->len, NULL, 0);
+	} else {
+		params_v1.port = port->port_num;
+		params_v1.msg_len = cec_msg->len;
+		memcpy(params_v1.msg, cec_msg->msg, cec_msg->len);
+		ret = cros_ec_cmd(cros_ec, cros_ec_cec->write_cmd_version,
+				  EC_CMD_CEC_WRITE_MSG, &params_v1,
+				  sizeof(params_v1), NULL, 0);
+	}
 
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
 	if (ret < 0) {
 		dev_err(cros_ec->dev,
 			"error writing CEC msg on EC: %d\n", ret);
@@ -143,20 +222,18 @@ static int cros_ec_cec_transmit(struct cec_adapter *adap, u8 attempts,
 
 static int cros_ec_cec_adap_enable(struct cec_adapter *adap, bool enable)
 {
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_cec_port *port = adap->priv;
+	struct cros_ec_cec *cros_ec_cec = port->cros_ec_cec;
 	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_set data;
-	} __packed msg = {};
+	struct ec_params_cec_set params = {
+		.cmd = CEC_CMD_ENABLE,
+		.port = port->port_num,
+		.val = enable,
+	};
 	int ret;
 
-	msg.msg.command = EC_CMD_CEC_SET;
-	msg.msg.outsize = sizeof(msg.data);
-	msg.data.cmd = CEC_CMD_ENABLE;
-	msg.data.val = enable;
-
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
+	ret = cros_ec_cmd(cros_ec, 0, EC_CMD_CEC_SET, &params, sizeof(params),
+			  NULL, 0);
 	if (ret < 0) {
 		dev_err(cros_ec->dev,
 			"error %sabling CEC on EC: %d\n",
@@ -203,38 +280,54 @@ static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
 #if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
 
 /*
- * The Firmware only handles a single CEC interface tied to a single HDMI
- * connector we specify along with the DRM device name handling the HDMI output
+ * Specify the DRM device name handling the HDMI output and the HDMI connector
+ * corresponding to each CEC port. The order of connectors must match the order
+ * in the EC (first connector is EC port 0, ...), and the number of connectors
+ * must match the number of ports in the EC (which can be queried using the
+ * EC_CMD_CEC_PORT_COUNT host command).
  */
 
 struct cec_dmi_match {
 	const char *sys_vendor;
 	const char *product_name;
 	const char *devname;
-	const char *conn;
+	const char *const *conns;
 };
 
+static const char *const port_b_conns[] = { "Port B", NULL };
+static const char *const port_db_conns[] = { "Port D", "Port B", NULL };
+static const char *const port_ba_conns[] = { "Port B", "Port A", NULL };
+static const char *const port_d_conns[] = { "Port D", NULL };
+
 static const struct cec_dmi_match cec_dmi_match_table[] = {
 	/* Google Fizz */
-	{ "Google", "Fizz", "0000:00:02.0", "Port B" },
+	{ "Google", "Fizz", "0000:00:02.0", port_b_conns },
 	/* Google Brask */
-	{ "Google", "Brask", "0000:00:02.0", "Port B" },
+	{ "Google", "Brask", "0000:00:02.0", port_b_conns },
 	/* Google Moli */
-	{ "Google", "Moli", "0000:00:02.0", "Port B" },
+	{ "Google", "Moli", "0000:00:02.0", port_b_conns },
 	/* Google Kinox */
-	{ "Google", "Kinox", "0000:00:02.0", "Port B" },
+	{ "Google", "Kinox", "0000:00:02.0", port_b_conns },
 	/* Google Kuldax */
-	{ "Google", "Kuldax", "0000:00:02.0", "Port B" },
+	{ "Google", "Kuldax", "0000:00:02.0", port_b_conns },
 	/* Google Aurash */
-	{ "Google", "Aurash", "0000:00:02.0", "Port B" },
+	{ "Google", "Aurash", "0000:00:02.0", port_b_conns },
 	/* Google Gladios */
-	{ "Google", "Gladios", "0000:00:02.0", "Port B" },
+	{ "Google", "Gladios", "0000:00:02.0", port_b_conns },
 	/* Google Lisbon */
-	{ "Google", "Lisbon", "0000:00:02.0", "Port B" },
+	{ "Google", "Lisbon", "0000:00:02.0", port_b_conns },
+	/* Google Dibbi */
+	{ "Google", "Dibbi", "0000:00:02.0", port_db_conns },
+	/* Google Constitution */
+	{ "Google", "Constitution", "0000:00:02.0", port_ba_conns },
+	/* Google Boxy */
+	{ "Google", "Boxy", "0000:00:02.0", port_d_conns },
+	/* Google Taranza */
+	{ "Google", "Taranza", "0000:00:02.0", port_db_conns },
 };
 
 static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
-						const char **conn)
+						const char * const **conns)
 {
 	int i;
 
@@ -251,7 +344,7 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
 			if (!d)
 				return ERR_PTR(-EPROBE_DEFER);
 			put_device(d);
-			*conn = m->conn;
+			*conns = m->conns;
 			return d;
 		}
 	}
@@ -265,23 +358,137 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
 #else
 
 static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
-						const char **conn)
+						const char * const **conns)
 {
 	return ERR_PTR(-ENODEV);
 }
 
 #endif
 
+static int cros_ec_cec_get_num_ports(struct cros_ec_cec *cros_ec_cec)
+{
+	struct ec_response_cec_port_count response;
+	int ret;
+
+	ret = cros_ec_cmd(cros_ec_cec->cros_ec, 0, EC_CMD_CEC_PORT_COUNT, NULL,
+			  0, &response, sizeof(response));
+	if (ret < 0) {
+		/*
+		 * Old EC firmware only supports one port and does not support
+		 * the port count command, so fall back to assuming one port.
+		 */
+		cros_ec_cec->num_ports = 1;
+		return 0;
+	}
+
+	if (response.port_count == 0) {
+		dev_err(cros_ec_cec->cros_ec->dev,
+			"EC reports 0 CEC ports\n");
+		return -ENODEV;
+	}
+
+	if (response.port_count > EC_CEC_MAX_PORTS) {
+		dev_err(cros_ec_cec->cros_ec->dev,
+			"EC reports too many ports: %d\n", response.port_count);
+		return -EINVAL;
+	}
+
+	cros_ec_cec->num_ports = response.port_count;
+	return 0;
+}
+
+static int cros_ec_cec_get_write_cmd_version(struct cros_ec_cec *cros_ec_cec)
+{
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	struct ec_params_get_cmd_versions_v1 params = {
+		.cmd = EC_CMD_CEC_WRITE_MSG,
+	};
+	struct ec_response_get_cmd_versions response;
+	int ret;
+
+	ret = cros_ec_cmd(cros_ec, 1, EC_CMD_GET_CMD_VERSIONS, &params,
+			  sizeof(params), &response, sizeof(response));
+	if (ret < 0) {
+		dev_err(cros_ec->dev,
+			"error getting CEC write command version: %d\n", ret);
+		return ret;
+	}
+
+	if (response.version_mask & EC_VER_MASK(1)) {
+		cros_ec_cec->write_cmd_version = 1;
+	} else {
+		if (cros_ec_cec->num_ports != 1) {
+			dev_err(cros_ec->dev,
+				"v0 write command only supports 1 port, %d reported\n",
+				cros_ec_cec->num_ports);
+			return -EINVAL;
+		}
+		cros_ec_cec->write_cmd_version = 0;
+	}
+
+	return 0;
+}
+
+static int cros_ec_cec_init_port(struct device *dev,
+				 struct cros_ec_cec *cros_ec_cec,
+				 int port_num, struct device *hdmi_dev,
+				 const char * const *conns)
+{
+	struct cros_ec_cec_port *port;
+	int ret;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->cros_ec_cec = cros_ec_cec;
+	port->port_num = port_num;
+
+	port->adap = cec_allocate_adapter(&cros_ec_cec_ops, port, DRV_NAME,
+					  CEC_CAP_DEFAULTS |
+					  CEC_CAP_CONNECTOR_INFO, 1);
+	if (IS_ERR(port->adap))
+		return PTR_ERR(port->adap);
+
+	if (!conns[port_num]) {
+		dev_err(dev, "no conn for port %d\n", port_num);
+		ret = -ENODEV;
+		goto out_probe_adapter;
+	}
+
+	port->notify = cec_notifier_cec_adap_register(hdmi_dev, conns[port_num],
+						      port->adap);
+	if (!port->notify) {
+		ret = -ENOMEM;
+		goto out_probe_adapter;
+	}
+
+	ret = cec_register_adapter(port->adap, dev);
+	if (ret < 0)
+		goto out_probe_notify;
+
+	cros_ec_cec->ports[port_num] = port;
+
+	return 0;
+
+out_probe_notify:
+	cec_notifier_cec_adap_unregister(port->notify, port->adap);
+out_probe_adapter:
+	cec_delete_adapter(port->adap);
+	return ret;
+}
+
 static int cros_ec_cec_probe(struct platform_device *pdev)
 {
 	struct cros_ec_dev *ec_dev = dev_get_drvdata(pdev->dev.parent);
 	struct cros_ec_device *cros_ec = ec_dev->ec_dev;
 	struct cros_ec_cec *cros_ec_cec;
+	struct cros_ec_cec_port *port;
 	struct device *hdmi_dev;
-	const char *conn = NULL;
+	const char * const *conns = NULL;
 	int ret;
 
-	hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conn);
+	hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conns);
 	if (IS_ERR(hdmi_dev))
 		return PTR_ERR(hdmi_dev);
 
@@ -295,18 +502,19 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	cros_ec_cec->adap = cec_allocate_adapter(&cros_ec_cec_ops, cros_ec_cec,
-						 DRV_NAME,
-						 CEC_CAP_DEFAULTS |
-						 CEC_CAP_CONNECTOR_INFO, 1);
-	if (IS_ERR(cros_ec_cec->adap))
-		return PTR_ERR(cros_ec_cec->adap);
+	ret = cros_ec_cec_get_num_ports(cros_ec_cec);
+	if (ret)
+		return ret;
 
-	cros_ec_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, conn,
-							     cros_ec_cec->adap);
-	if (!cros_ec_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_adapter;
+	ret = cros_ec_cec_get_write_cmd_version(cros_ec_cec);
+	if (ret)
+		return ret;
+
+	for (int i = 0; i < cros_ec_cec->num_ports; i++) {
+		ret = cros_ec_cec_init_port(&pdev->dev, cros_ec_cec, i,
+					    hdmi_dev, conns);
+		if (ret)
+			goto unregister_ports;
 	}
 
 	/* Get CEC events from the EC. */
@@ -315,20 +523,24 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
 					       &cros_ec_cec->notifier);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register notifier\n");
-		goto out_probe_notify;
+		goto unregister_ports;
 	}
 
-	ret = cec_register_adapter(cros_ec_cec->adap, &pdev->dev);
-	if (ret < 0)
-		goto out_probe_notify;
-
 	return 0;
 
-out_probe_notify:
-	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
-					 cros_ec_cec->adap);
-out_probe_adapter:
-	cec_delete_adapter(cros_ec_cec->adap);
+unregister_ports:
+	/*
+	 * Unregister any adapters which have been registered. We don't add the
+	 * port to the array until the adapter has been registered successfully,
+	 * so any non-NULL ports must have been registered.
+	 */
+	for (int i = 0; i < cros_ec_cec->num_ports; i++) {
+		port = cros_ec_cec->ports[i];
+		if (!port)
+			break;
+		cec_notifier_cec_adap_unregister(port->notify, port->adap);
+		cec_unregister_adapter(port->adap);
+	}
 	return ret;
 }
 
@@ -336,6 +548,7 @@ static void cros_ec_cec_remove(struct platform_device *pdev)
 {
 	struct cros_ec_cec *cros_ec_cec = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
+	struct cros_ec_cec_port *port;
 	int ret;
 
 	/*
@@ -349,9 +562,11 @@ static void cros_ec_cec_remove(struct platform_device *pdev)
 	if (ret)
 		dev_err(dev, "failed to unregister notifier\n");
 
-	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
-					 cros_ec_cec->adap);
-	cec_unregister_adapter(cros_ec_cec->adap);
+	for (int i = 0; i < cros_ec_cec->num_ports; i++) {
+		port = cros_ec_cec->ports[i];
+		cec_notifier_cec_adap_unregister(port->notify, port->adap);
+		cec_unregister_adapter(port->adap);
+	}
 }
 
 static struct platform_driver cros_ec_cec_driver = {