Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/cxd2820r.h b/drivers/media/dvb-frontends/cxd2820r.h
new file mode 100644
index 0000000000..4aa6cf4fb9
--- /dev/null
+++ b/drivers/media/dvb-frontends/cxd2820r.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Sony CXD2820R demodulator driver
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ */
+
+
+#ifndef CXD2820R_H
+#define CXD2820R_H
+
+#include <linux/dvb/frontend.h>
+
+#define CXD2820R_GPIO_D (0 << 0) /* disable */
+#define CXD2820R_GPIO_E (1 << 0) /* enable */
+#define CXD2820R_GPIO_O (0 << 1) /* output */
+#define CXD2820R_GPIO_I (1 << 1) /* input */
+#define CXD2820R_GPIO_L (0 << 2) /* output low */
+#define CXD2820R_GPIO_H (1 << 2) /* output high */
+
+#define CXD2820R_TS_SERIAL        0x08
+#define CXD2820R_TS_SERIAL_MSB    0x28
+#define CXD2820R_TS_PARALLEL      0x30
+#define CXD2820R_TS_PARALLEL_MSB  0x70
+
+/*
+ * I2C address: 0x6c, 0x6d
+ */
+
+/**
+ * struct cxd2820r_platform_data - Platform data for the cxd2820r driver
+ * @ts_mode: TS mode.
+ * @ts_clk_inv: TS clock inverted.
+ * @if_agc_polarity: IF AGC polarity.
+ * @spec_inv: Input spectrum inverted.
+ * @gpio_chip_base: GPIO.
+ * @get_dvb_frontend: Get DVB frontend.
+ */
+struct cxd2820r_platform_data {
+	u8 ts_mode;
+	bool ts_clk_inv;
+	bool if_agc_polarity;
+	bool spec_inv;
+	int **gpio_chip_base;
+
+	struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
+/* private: For legacy media attach wrapper. Do not set value. */
+	bool attach_in_use;
+};
+
+/**
+ * struct cxd2820r_config - configuration for cxd2020r demod
+ *
+ * @i2c_address: Demodulator I2C address. Driver determines DVB-C slave I2C
+ *		 address automatically from master address.
+ *		 Default: none, must set. Values: 0x6c, 0x6d.
+ * @ts_mode:	TS output mode. Default: none, must set. Values: FIXME?
+ * @ts_clock_inv: TS clock inverted. Default: 0. Values: 0, 1.
+ * @if_agc_polarity: Default: 0. Values: 0, 1
+ * @spec_inv:	Spectrum inversion. Default: 0. Values: 0, 1.
+ */
+struct cxd2820r_config {
+	/* Demodulator I2C address.
+	 * Driver determines DVB-C slave I2C address automatically from master
+	 * address.
+	 * Default: none, must set
+	 * Values: 0x6c, 0x6d
+	 */
+	u8 i2c_address;
+
+	/* TS output mode.
+	 * Default: none, must set.
+	 * Values:
+	 */
+	u8 ts_mode;
+
+	/* TS clock inverted.
+	 * Default: 0
+	 * Values: 0, 1
+	 */
+	bool ts_clock_inv;
+
+	/* IF AGC polarity.
+	 * Default: 0
+	 * Values: 0, 1
+	 */
+	bool if_agc_polarity;
+
+	/* Spectrum inversion.
+	 * Default: 0
+	 * Values: 0, 1
+	 */
+	bool spec_inv;
+};
+
+
+#if IS_REACHABLE(CONFIG_DVB_CXD2820R)
+/**
+ * cxd2820r_attach - Attach a cxd2820r demod
+ *
+ * @config: pointer to &struct cxd2820r_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ * @gpio_chip_base: if zero, disables GPIO setting. Otherwise, if
+ *		    CONFIG_GPIOLIB is set dynamically allocate
+ *		    gpio base; if is not set, use its value to
+ *		    setup the GPIO pins.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
+extern struct dvb_frontend *cxd2820r_attach(
+	const struct cxd2820r_config *config,
+	struct i2c_adapter *i2c,
+	int *gpio_chip_base
+);
+#else
+static inline struct dvb_frontend *cxd2820r_attach(
+	const struct cxd2820r_config *config,
+	struct i2c_adapter *i2c,
+	int *gpio_chip_base
+)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif
+
+#endif /* CXD2820R_H */