Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2668 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c
new file mode 100644
index 0000000000..c958bcff02
--- /dev/null
+++ b/drivers/media/dvb-frontends/dib0090.c
@@ -0,0 +1,2668 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux-DVB Driver for DiBcom's DiB0090 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
+ *
+ * This code is more or less generated from another driver, please
+ * excuse some codingstyle oddities.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#include <media/dvb_frontend.h>
+
+#include "dib0090.h"
+#include "dibx000_common.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(fmt, arg...) do {					\
+	if (debug)							\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt),			\
+		       __func__, ##arg);				\
+} while (0)
+
+#define CONFIG_SYS_DVBT
+#define CONFIG_SYS_ISDBT
+#define CONFIG_BAND_CBAND
+#define CONFIG_BAND_VHF
+#define CONFIG_BAND_UHF
+#define CONFIG_DIB0090_USE_PWM_AGC
+
+#define EN_LNA0      0x8000
+#define EN_LNA1      0x4000
+#define EN_LNA2      0x2000
+#define EN_LNA3      0x1000
+#define EN_MIX0      0x0800
+#define EN_MIX1      0x0400
+#define EN_MIX2      0x0200
+#define EN_MIX3      0x0100
+#define EN_IQADC     0x0040
+#define EN_PLL       0x0020
+#define EN_TX        0x0010
+#define EN_BB        0x0008
+#define EN_LO        0x0004
+#define EN_BIAS      0x0001
+
+#define EN_IQANA     0x0002
+#define EN_DIGCLK    0x0080	/* not in the 0x24 reg, only in 0x1b */
+#define EN_CRYSTAL   0x0002
+
+#define EN_UHF		 0x22E9
+#define EN_VHF		 0x44E9
+#define EN_LBD		 0x11E9
+#define EN_SBD		 0x44E9
+#define EN_CAB		 0x88E9
+
+/* Calibration defines */
+#define      DC_CAL 0x1
+#define     WBD_CAL 0x2
+#define    TEMP_CAL 0x4
+#define CAPTRIM_CAL 0x8
+
+#define KROSUS_PLL_LOCKED   0x800
+#define KROSUS              0x2
+
+/* Use those defines to identify SOC version */
+#define SOC               0x02
+#define SOC_7090_P1G_11R1 0x82
+#define SOC_7090_P1G_21R1 0x8a
+#define SOC_8090_P1G_11R1 0x86
+#define SOC_8090_P1G_21R1 0x8e
+
+/* else use thos ones to check */
+#define P1A_B      0x0
+#define P1C	   0x1
+#define P1D_E_F    0x3
+#define P1G	   0x7
+#define P1G_21R2   0xf
+
+#define MP001 0x1		/* Single 9090/8096 */
+#define MP005 0x4		/* Single Sband */
+#define MP008 0x6		/* Dual diversity VHF-UHF-LBAND */
+#define MP009 0x7		/* Dual diversity 29098 CBAND-UHF-LBAND-SBAND */
+
+#define pgm_read_word(w) (*w)
+
+struct dc_calibration;
+
+struct dib0090_tuning {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 switch_trim;
+	u8 lna_tune;
+	u16 lna_bias;
+	u16 v2i;
+	u16 mix;
+	u16 load;
+	u16 tuner_enable;
+};
+
+struct dib0090_pll {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 vco_band;
+	u8 hfdiv_code;
+	u8 hfdiv;
+	u8 topresc;
+};
+
+struct dib0090_identity {
+	u8 version;
+	u8 product;
+	u8 p1g;
+	u8 in_soc;
+};
+
+struct dib0090_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe;
+	const struct dib0090_config *config;
+
+	u8 current_band;
+	enum frontend_tune_state tune_state;
+	u32 current_rf;
+
+	u16 wbd_offset;
+	s16 wbd_target;		/* in dB */
+
+	s16 rf_gain_limit;	/* take-over-point: where to split between bb and rf gain */
+	s16 current_gain;	/* keeps the currently programmed gain */
+	u8 agc_step;		/* new binary search */
+
+	u16 gain[2];		/* for channel monitoring */
+
+	const u16 *rf_ramp;
+	const u16 *bb_ramp;
+
+	/* for the software AGC ramps */
+	u16 bb_1_def;
+	u16 rf_lt_def;
+	u16 gain_reg[4];
+
+	/* for the captrim/dc-offset search */
+	s8 step;
+	s16 adc_diff;
+	s16 min_adc_diff;
+
+	s8 captrim;
+	s8 fcaptrim;
+
+	const struct dc_calibration *dc;
+	u16 bb6, bb7;
+
+	const struct dib0090_tuning *current_tune_table_index;
+	const struct dib0090_pll *current_pll_table_index;
+
+	u8 tuner_is_tuned;
+	u8 agc_freeze;
+
+	struct dib0090_identity identity;
+
+	u32 rf_request;
+	u8 current_standard;
+
+	u8 calibrate;
+	u32 rest;
+	u16 bias;
+	s16 temperature;
+
+	u8 wbd_calibration_gain;
+	const struct dib0090_wbd_slope *current_wbd_table;
+	u16 wbdmux;
+
+	/* for the I2C transfer */
+	struct i2c_msg msg[2];
+	u8 i2c_write_buffer[3];
+	u8 i2c_read_buffer[2];
+	struct mutex i2c_buffer_lock;
+};
+
+struct dib0090_fw_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe;
+	struct dib0090_identity identity;
+	const struct dib0090_config *config;
+
+	/* for the I2C transfer */
+	struct i2c_msg msg;
+	u8 i2c_write_buffer[2];
+	u8 i2c_read_buffer[2];
+	struct mutex i2c_buffer_lock;
+};
+
+static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
+{
+	u16 ret;
+
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return 0;
+	}
+
+	state->i2c_write_buffer[0] = reg;
+
+	memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
+	state->msg[0].addr = state->config->i2c_address;
+	state->msg[0].flags = 0;
+	state->msg[0].buf = state->i2c_write_buffer;
+	state->msg[0].len = 1;
+	state->msg[1].addr = state->config->i2c_address;
+	state->msg[1].flags = I2C_M_RD;
+	state->msg[1].buf = state->i2c_read_buffer;
+	state->msg[1].len = 2;
+
+	if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
+		pr_warn("DiB0090 I2C read failed\n");
+		ret = 0;
+	} else
+		ret = (state->i2c_read_buffer[0] << 8)
+			| state->i2c_read_buffer[1];
+
+	mutex_unlock(&state->i2c_buffer_lock);
+	return ret;
+}
+
+static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
+{
+	int ret;
+
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+
+	state->i2c_write_buffer[0] = reg & 0xff;
+	state->i2c_write_buffer[1] = val >> 8;
+	state->i2c_write_buffer[2] = val & 0xff;
+
+	memset(state->msg, 0, sizeof(struct i2c_msg));
+	state->msg[0].addr = state->config->i2c_address;
+	state->msg[0].flags = 0;
+	state->msg[0].buf = state->i2c_write_buffer;
+	state->msg[0].len = 3;
+
+	if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
+		pr_warn("DiB0090 I2C write failed\n");
+		ret = -EREMOTEIO;
+	} else
+		ret = 0;
+
+	mutex_unlock(&state->i2c_buffer_lock);
+	return ret;
+}
+
+static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
+{
+	u16 ret;
+
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return 0;
+	}
+
+	state->i2c_write_buffer[0] = reg;
+
+	memset(&state->msg, 0, sizeof(struct i2c_msg));
+	state->msg.addr = reg;
+	state->msg.flags = I2C_M_RD;
+	state->msg.buf = state->i2c_read_buffer;
+	state->msg.len = 2;
+	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
+		pr_warn("DiB0090 I2C read failed\n");
+		ret = 0;
+	} else
+		ret = (state->i2c_read_buffer[0] << 8)
+			| state->i2c_read_buffer[1];
+
+	mutex_unlock(&state->i2c_buffer_lock);
+	return ret;
+}
+
+static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
+{
+	int ret;
+
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+
+	state->i2c_write_buffer[0] = val >> 8;
+	state->i2c_write_buffer[1] = val & 0xff;
+
+	memset(&state->msg, 0, sizeof(struct i2c_msg));
+	state->msg.addr = reg;
+	state->msg.flags = 0;
+	state->msg.buf = state->i2c_write_buffer;
+	state->msg.len = 2;
+	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
+		pr_warn("DiB0090 I2C write failed\n");
+		ret = -EREMOTEIO;
+	} else
+		ret = 0;
+
+	mutex_unlock(&state->i2c_buffer_lock);
+	return ret;
+}
+
+#define HARD_RESET(state) do {  if (cfg->reset) {  if (cfg->sleep) cfg->sleep(fe, 0); msleep(10);  cfg->reset(fe, 1); msleep(10);  cfg->reset(fe, 0); msleep(10);  }  } while (0)
+#define ADC_TARGET -220
+#define GAIN_ALPHA 5
+#define WBD_ALPHA 6
+#define LPF	100
+static void dib0090_write_regs(struct dib0090_state *state, u8 r, const u16 * b, u8 c)
+{
+	do {
+		dib0090_write_reg(state, r++, *b++);
+	} while (--c);
+}
+
+static int dib0090_identify(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	u16 v;
+	struct dib0090_identity *identity = &state->identity;
+
+	v = dib0090_read_reg(state, 0x1a);
+
+	identity->p1g = 0;
+	identity->in_soc = 0;
+
+	dprintk("Tuner identification (Version = 0x%04x)\n", v);
+
+	/* without PLL lock info */
+	v &= ~KROSUS_PLL_LOCKED;
+
+	identity->version = v & 0xff;
+	identity->product = (v >> 8) & 0xf;
+
+	if (identity->product != KROSUS)
+		goto identification_error;
+
+	if ((identity->version & 0x3) == SOC) {
+		identity->in_soc = 1;
+		switch (identity->version) {
+		case SOC_8090_P1G_11R1:
+			dprintk("SOC 8090 P1-G11R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_8090_P1G_21R1:
+			dprintk("SOC 8090 P1-G21R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_7090_P1G_11R1:
+			dprintk("SOC 7090 P1-G11R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_7090_P1G_21R1:
+			dprintk("SOC 7090 P1-G21R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		default:
+			goto identification_error;
+		}
+	} else {
+		switch ((identity->version >> 5) & 0x7) {
+		case MP001:
+			dprintk("MP001 : 9090/8096\n");
+			break;
+		case MP005:
+			dprintk("MP005 : Single Sband\n");
+			break;
+		case MP008:
+			dprintk("MP008 : diversity VHF-UHF-LBAND\n");
+			break;
+		case MP009:
+			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND\n");
+			break;
+		default:
+			goto identification_error;
+		}
+
+		switch (identity->version & 0x1f) {
+		case P1G_21R2:
+			dprintk("P1G_21R2 detected\n");
+			identity->p1g = 1;
+			break;
+		case P1G:
+			dprintk("P1G detected\n");
+			identity->p1g = 1;
+			break;
+		case P1D_E_F:
+			dprintk("P1D/E/F detected\n");
+			break;
+		case P1C:
+			dprintk("P1C detected\n");
+			break;
+		case P1A_B:
+			dprintk("P1-A/B detected: driver is deactivated - not available\n");
+			goto identification_error;
+			break;
+		default:
+			goto identification_error;
+		}
+	}
+
+	return 0;
+
+identification_error:
+	return -EIO;
+}
+
+static int dib0090_fw_identify(struct dvb_frontend *fe)
+{
+	struct dib0090_fw_state *state = fe->tuner_priv;
+	struct dib0090_identity *identity = &state->identity;
+
+	u16 v = dib0090_fw_read_reg(state, 0x1a);
+	identity->p1g = 0;
+	identity->in_soc = 0;
+
+	dprintk("FE: Tuner identification (Version = 0x%04x)\n", v);
+
+	/* without PLL lock info */
+	v &= ~KROSUS_PLL_LOCKED;
+
+	identity->version = v & 0xff;
+	identity->product = (v >> 8) & 0xf;
+
+	if (identity->product != KROSUS)
+		goto identification_error;
+
+	if ((identity->version & 0x3) == SOC) {
+		identity->in_soc = 1;
+		switch (identity->version) {
+		case SOC_8090_P1G_11R1:
+			dprintk("SOC 8090 P1-G11R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_8090_P1G_21R1:
+			dprintk("SOC 8090 P1-G21R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_7090_P1G_11R1:
+			dprintk("SOC 7090 P1-G11R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		case SOC_7090_P1G_21R1:
+			dprintk("SOC 7090 P1-G21R1 Has been detected\n");
+			identity->p1g = 1;
+			break;
+		default:
+			goto identification_error;
+		}
+	} else {
+		switch ((identity->version >> 5) & 0x7) {
+		case MP001:
+			dprintk("MP001 : 9090/8096\n");
+			break;
+		case MP005:
+			dprintk("MP005 : Single Sband\n");
+			break;
+		case MP008:
+			dprintk("MP008 : diversity VHF-UHF-LBAND\n");
+			break;
+		case MP009:
+			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND\n");
+			break;
+		default:
+			goto identification_error;
+		}
+
+		switch (identity->version & 0x1f) {
+		case P1G_21R2:
+			dprintk("P1G_21R2 detected\n");
+			identity->p1g = 1;
+			break;
+		case P1G:
+			dprintk("P1G detected\n");
+			identity->p1g = 1;
+			break;
+		case P1D_E_F:
+			dprintk("P1D/E/F detected\n");
+			break;
+		case P1C:
+			dprintk("P1C detected\n");
+			break;
+		case P1A_B:
+			dprintk("P1-A/B detected: driver is deactivated - not available\n");
+			goto identification_error;
+			break;
+		default:
+			goto identification_error;
+		}
+	}
+
+	return 0;
+
+identification_error:
+	return -EIO;
+}
+
+static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	u16 PllCfg, i, v;
+
+	HARD_RESET(state);
+	dib0090_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
+	if (cfg->in_soc)
+		return;
+
+	dib0090_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL);	/* PLL, DIG_CLK and CRYSTAL remain */
+	/* adcClkOutRatio=8->7, release reset */
+	dib0090_write_reg(state, 0x20, ((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (0 << 4) | 0);
+	if (cfg->clkoutdrive != 0)
+		dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
+				| (cfg->clkoutdrive << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
+	else
+		dib0090_write_reg(state, 0x23, (0 << 15) | ((!cfg->analog_output) << 14) | (2 << 10) | (1 << 9) | (0 << 8)
+				| (7 << 5) | (cfg->clkouttobamse << 4) | (0 << 2) | (0));
+
+	/* Read Pll current config * */
+	PllCfg = dib0090_read_reg(state, 0x21);
+
+	/** Reconfigure PLL if current setting is different from default setting **/
+	if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && (!cfg->in_soc)
+			&& !cfg->io.pll_bypass) {
+
+		/* Set Bypass mode */
+		PllCfg |= (1 << 15);
+		dib0090_write_reg(state, 0x21, PllCfg);
+
+		/* Set Reset Pll */
+		PllCfg &= ~(1 << 13);
+		dib0090_write_reg(state, 0x21, PllCfg);
+
+	/*** Set new Pll configuration in bypass and reset state ***/
+		PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
+		dib0090_write_reg(state, 0x21, PllCfg);
+
+		/* Remove Reset Pll */
+		PllCfg |= (1 << 13);
+		dib0090_write_reg(state, 0x21, PllCfg);
+
+	/*** Wait for PLL lock ***/
+		i = 100;
+		do {
+			v = !!(dib0090_read_reg(state, 0x1a) & 0x800);
+			if (v)
+				break;
+		} while (--i);
+
+		if (i == 0) {
+			dprintk("Pll: Unable to lock Pll\n");
+			return;
+		}
+
+		/* Finally Remove Bypass mode */
+		PllCfg &= ~(1 << 15);
+		dib0090_write_reg(state, 0x21, PllCfg);
+	}
+
+	if (cfg->io.pll_bypass) {
+		PllCfg |= (cfg->io.pll_bypass << 15);
+		dib0090_write_reg(state, 0x21, PllCfg);
+	}
+}
+
+static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg)
+{
+	struct dib0090_fw_state *state = fe->tuner_priv;
+	u16 PllCfg;
+	u16 v;
+	int i;
+
+	dprintk("fw reset digital\n");
+	HARD_RESET(state);
+
+	dib0090_fw_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
+	dib0090_fw_write_reg(state, 0x1b, EN_DIGCLK | EN_PLL | EN_CRYSTAL);	/* PLL, DIG_CLK and CRYSTAL remain */
+
+	dib0090_fw_write_reg(state, 0x20,
+			((cfg->io.adc_clock_ratio - 1) << 11) | (0 << 10) | (1 << 9) | (1 << 8) | (cfg->data_tx_drv << 4) | cfg->ls_cfg_pad_drv);
+
+	v = (0 << 15) | ((!cfg->analog_output) << 14) | (1 << 9) | (0 << 8) | (cfg->clkouttobamse << 4) | (0 << 2) | (0);
+	if (cfg->clkoutdrive != 0)
+		v |= cfg->clkoutdrive << 5;
+	else
+		v |= 7 << 5;
+
+	v |= 2 << 10;
+	dib0090_fw_write_reg(state, 0x23, v);
+
+	/* Read Pll current config * */
+	PllCfg = dib0090_fw_read_reg(state, 0x21);
+
+	/** Reconfigure PLL if current setting is different from default setting **/
+	if ((PllCfg & 0x1FFF) != ((cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv)) && !cfg->io.pll_bypass) {
+
+		/* Set Bypass mode */
+		PllCfg |= (1 << 15);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+		/* Set Reset Pll */
+		PllCfg &= ~(1 << 13);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+	/*** Set new Pll configuration in bypass and reset state ***/
+		PllCfg = (1 << 15) | (0 << 13) | (cfg->io.pll_range << 12) | (cfg->io.pll_loopdiv << 6) | (cfg->io.pll_prediv);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+		/* Remove Reset Pll */
+		PllCfg |= (1 << 13);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+
+	/*** Wait for PLL lock ***/
+		i = 100;
+		do {
+			v = !!(dib0090_fw_read_reg(state, 0x1a) & 0x800);
+			if (v)
+				break;
+		} while (--i);
+
+		if (i == 0) {
+			dprintk("Pll: Unable to lock Pll\n");
+			return -EIO;
+		}
+
+		/* Finally Remove Bypass mode */
+		PllCfg &= ~(1 << 15);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+	}
+
+	if (cfg->io.pll_bypass) {
+		PllCfg |= (cfg->io.pll_bypass << 15);
+		dib0090_fw_write_reg(state, 0x21, PllCfg);
+	}
+
+	return dib0090_fw_identify(fe);
+}
+
+static int dib0090_wakeup(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	if (state->config->sleep)
+		state->config->sleep(fe, 0);
+
+	/* enable dataTX in case we have been restarted in the wrong moment */
+	dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+	return 0;
+}
+
+static int dib0090_sleep(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	if (state->config->sleep)
+		state->config->sleep(fe, 1);
+	return 0;
+}
+
+void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	if (fast)
+		dib0090_write_reg(state, 0x04, 0);
+	else
+		dib0090_write_reg(state, 0x04, 1);
+}
+
+EXPORT_SYMBOL(dib0090_dcc_freq);
+
+static const u16 bb_ramp_pwm_normal_socs[] = {
+	550, /* max BB gain in 10th of dB */
+	(1<<9) | 8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+	440,
+	(4  << 9) | 0, /* BB_RAMP3 = 26dB */
+	(0  << 9) | 208, /* BB_RAMP4 */
+	(4  << 9) | 208, /* BB_RAMP5 = 29dB */
+	(0  << 9) | 440, /* BB_RAMP6 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090p[] = {
+	280, /* max RF gain in 10th of dB */
+	18, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	504, /* ramp_max = maximum X used on the ramp */
+	(29 << 10) | 364, /* RF_RAMP5, LNA 1 = 8dB */
+	(0  << 10) | 504, /* RF_RAMP6, LNA 1 */
+	(60 << 10) | 228, /* RF_RAMP7, LNA 2 = 7.7dB */
+	(0  << 10) | 364, /* RF_RAMP8, LNA 2 */
+	(34 << 10) | 109, /* GAIN_4_1, LNA 3 = 6.8dB */
+	(0  << 10) | 228, /* GAIN_4_2, LNA 3 */
+	(37 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */
+	(0  << 10) | 109, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090e_sensitivity[] = {
+	186, /* max RF gain in 10th of dB */
+	40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	746, /* ramp_max = maximum X used on the ramp */
+	(10 << 10) | 345, /* RF_RAMP5, LNA 1 = 10dB */
+	(0  << 10) | 746, /* RF_RAMP6, LNA 1 */
+	(0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */
+	(0  << 10) | 0, /* RF_RAMP8, LNA 2 */
+	(28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */
+	(0  << 10) | 345, /* GAIN_4_2, LNA 3 */
+	(20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */
+	(0  << 10) | 200, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_7090e_aci[] = {
+	86, /* max RF gain in 10th of dB */
+	40, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	345, /* ramp_max = maximum X used on the ramp */
+	(0 << 10) | 0, /* RF_RAMP5, LNA 1 = 8dB */ /* 7.47 dB */
+	(0 << 10) | 0, /* RF_RAMP6, LNA 1 */
+	(0 << 10) | 0, /* RF_RAMP7, LNA 2 = 0 dB */
+	(0 << 10) | 0, /* RF_RAMP8, LNA 2 */
+	(28 << 10) | 200, /* GAIN_4_1, LNA 3 = 6.8dB */ /* 3.61 dB */
+	(0  << 10) | 345, /* GAIN_4_2, LNA 3 */
+	(20 << 10) | 0, /* RF_RAMP3, LNA 4 = 6.2dB */ /* 4.96 dB */
+	(0  << 10) | 200, /* RF_RAMP4, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_cband_8090[] = {
+	345, /* max RF gain in 10th of dB */
+	29, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	1000, /* ramp_max = maximum X used on the ramp */
+	(35 << 10) | 772, /* RF_RAMP3, LNA 1 = 8dB */
+	(0  << 10) | 1000, /* RF_RAMP4, LNA 1 */
+	(58 << 10) | 496, /* RF_RAMP5, LNA 2 = 9.5dB */
+	(0  << 10) | 772, /* RF_RAMP6, LNA 2 */
+	(27 << 10) | 200, /* RF_RAMP7, LNA 3 = 10.5dB */
+	(0  << 10) | 496, /* RF_RAMP8, LNA 3 */
+	(40 << 10) | 0, /* GAIN_4_1, LNA 4 = 7dB */
+	(0  << 10) | 200, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf_7090[] = {
+	407, /* max RF gain in 10th of dB */
+	13, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	529, /* ramp_max = maximum X used on the ramp */
+	(23 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */
+	(0  << 10) | 176, /* RF_RAMP4, LNA 1 */
+	(63 << 10) | 400, /* RF_RAMP5, LNA 2 = 8dB */
+	(0  << 10) | 529, /* RF_RAMP6, LNA 2 */
+	(48 << 10) | 316, /* RF_RAMP7, LNA 3 = 6.8dB */
+	(0  << 10) | 400, /* RF_RAMP8, LNA 3 */
+	(29 << 10) | 176, /* GAIN_4_1, LNA 4 = 11.5dB */
+	(0  << 10) | 316, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf_8090[] = {
+	388, /* max RF gain in 10th of dB */
+	26, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	1008, /* ramp_max = maximum X used on the ramp */
+	(11 << 10) | 0, /* RF_RAMP3, LNA 1 = 14.7dB */
+	(0  << 10) | 369, /* RF_RAMP4, LNA 1 */
+	(41 << 10) | 809, /* RF_RAMP5, LNA 2 = 8dB */
+	(0  << 10) | 1008, /* RF_RAMP6, LNA 2 */
+	(27 << 10) | 659, /* RF_RAMP7, LNA 3 = 6dB */
+	(0  << 10) | 809, /* RF_RAMP8, LNA 3 */
+	(14 << 10) | 369, /* GAIN_4_1, LNA 4 = 11.5dB */
+	(0  << 10) | 659, /* GAIN_4_2, LNA 4 */
+};
+
+/* GENERAL PWM ramp definition for all other Krosus */
+static const u16 bb_ramp_pwm_normal[] = {
+	500, /* max BB gain in 10th of dB */
+	8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+	400,
+	(2  << 9) | 0, /* BB_RAMP3 = 21dB */
+	(0  << 9) | 168, /* BB_RAMP4 */
+	(2  << 9) | 168, /* BB_RAMP5 = 29dB */
+	(0  << 9) | 400, /* BB_RAMP6 */
+};
+
+#if 0
+/* Currently unused */
+static const u16 bb_ramp_pwm_boost[] = {
+	550, /* max BB gain in 10th of dB */
+	8, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> BB_RAMP2 */
+	440,
+	(2  << 9) | 0, /* BB_RAMP3 = 26dB */
+	(0  << 9) | 208, /* BB_RAMP4 */
+	(2  << 9) | 208, /* BB_RAMP5 = 29dB */
+	(0  << 9) | 440, /* BB_RAMP6 */
+};
+#endif
+
+static const u16 rf_ramp_pwm_cband[] = {
+	314, /* max RF gain in 10th of dB */
+	33, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	1023, /* ramp_max = maximum X used on the ramp */
+	(8  << 10) | 743, /* RF_RAMP3, LNA 1 = 0dB */
+	(0  << 10) | 1023, /* RF_RAMP4, LNA 1 */
+	(15 << 10) | 469, /* RF_RAMP5, LNA 2 = 0dB */
+	(0  << 10) | 742, /* RF_RAMP6, LNA 2 */
+	(9  << 10) | 234, /* RF_RAMP7, LNA 3 = 0dB */
+	(0  << 10) | 468, /* RF_RAMP8, LNA 3 */
+	(9  << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */
+	(0  << 10) | 233, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_vhf[] = {
+	398, /* max RF gain in 10th of dB */
+	24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	954, /* ramp_max = maximum X used on the ramp */
+	(7  << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */
+	(0  << 10) | 290, /* RF_RAMP4, LNA 1 */
+	(16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */
+	(0  << 10) | 954, /* RF_RAMP6, LNA 2 */
+	(17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */
+	(0  << 10) | 699, /* RF_RAMP8, LNA 3 */
+	(7  << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */
+	(0  << 10) | 580, /* GAIN_4_2, LNA 4 */
+};
+
+static const u16 rf_ramp_pwm_uhf[] = {
+	398, /* max RF gain in 10th of dB */
+	24, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	954, /* ramp_max = maximum X used on the ramp */
+	(7  << 10) | 0, /* RF_RAMP3, LNA 1 = 13.2dB */
+	(0  << 10) | 290, /* RF_RAMP4, LNA 1 */
+	(16 << 10) | 699, /* RF_RAMP5, LNA 2 = 10.5dB */
+	(0  << 10) | 954, /* RF_RAMP6, LNA 2 */
+	(17 << 10) | 580, /* RF_RAMP7, LNA 3 = 5dB */
+	(0  << 10) | 699, /* RF_RAMP8, LNA 3 */
+	(7  << 10) | 290, /* GAIN_4_1, LNA 4 = 12.5dB */
+	(0  << 10) | 580, /* GAIN_4_2, LNA 4 */
+};
+
+#if 0
+/* Currently unused */
+static const u16 rf_ramp_pwm_sband[] = {
+	253, /* max RF gain in 10th of dB */
+	38, /* ramp_slope = 1dB of gain -> clock_ticks_per_db = clk_khz / ramp_slope -> RF_RAMP2 */
+	961,
+	(4  << 10) | 0, /* RF_RAMP3, LNA 1 = 14.1dB */
+	(0  << 10) | 508, /* RF_RAMP4, LNA 1 */
+	(9  << 10) | 508, /* RF_RAMP5, LNA 2 = 11.2dB */
+	(0  << 10) | 961, /* RF_RAMP6, LNA 2 */
+	(0  << 10) | 0, /* RF_RAMP7, LNA 3 = 0dB */
+	(0  << 10) | 0, /* RF_RAMP8, LNA 3 */
+	(0  << 10) | 0, /* GAIN_4_1, LNA 4 = 0dB */
+	(0  << 10) | 0, /* GAIN_4_2, LNA 4 */
+};
+#endif
+
+struct slope {
+	s16 range;
+	s16 slope;
+};
+static u16 slopes_to_scale(const struct slope *slopes, u8 num, s16 val)
+{
+	u8 i;
+	u16 rest;
+	u16 ret = 0;
+	for (i = 0; i < num; i++) {
+		if (val > slopes[i].range)
+			rest = slopes[i].range;
+		else
+			rest = val;
+		ret += (rest * slopes[i].slope) / slopes[i].range;
+		val -= rest;
+	}
+	return ret;
+}
+
+static const struct slope dib0090_wbd_slopes[3] = {
+	{66, 120},		/* -64,-52: offset -   65 */
+	{600, 170},		/* -52,-35: 65     -  665 */
+	{170, 250},		/* -45,-10: 665    - 835 */
+};
+
+static s16 dib0090_wbd_to_db(struct dib0090_state *state, u16 wbd)
+{
+	wbd &= 0x3ff;
+	if (wbd < state->wbd_offset)
+		wbd = 0;
+	else
+		wbd -= state->wbd_offset;
+	/* -64dB is the floor */
+	return -640 + (s16) slopes_to_scale(dib0090_wbd_slopes, ARRAY_SIZE(dib0090_wbd_slopes), wbd);
+}
+
+static void dib0090_wbd_target(struct dib0090_state *state, u32 rf)
+{
+	u16 offset = 250;
+
+	/* TODO : DAB digital N+/-1 interferer perfs : offset = 10 */
+
+	if (state->current_band == BAND_VHF)
+		offset = 650;
+#ifndef FIRMWARE_FIREFLY
+	if (state->current_band == BAND_VHF)
+		offset = state->config->wbd_vhf_offset;
+	if (state->current_band == BAND_CBAND)
+		offset = state->config->wbd_cband_offset;
+#endif
+
+	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset);
+	dprintk("wbd-target: %d dB\n", (u32) state->wbd_target);
+}
+
+static const int gain_reg_addr[4] = {
+	0x08, 0x0a, 0x0f, 0x01
+};
+
+static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16 top_delta, u8 force)
+{
+	u16 rf, bb, ref;
+	u16 i, v, gain_reg[4] = { 0 }, gain;
+	const u16 *g;
+
+	if (top_delta < -511)
+		top_delta = -511;
+	if (top_delta > 511)
+		top_delta = 511;
+
+	if (force) {
+		top_delta *= (1 << WBD_ALPHA);
+		gain_delta *= (1 << GAIN_ALPHA);
+	}
+
+	if (top_delta >= ((s16) (state->rf_ramp[0] << WBD_ALPHA) - state->rf_gain_limit))	/* overflow */
+		state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
+	else
+		state->rf_gain_limit += top_delta;
+
+	if (state->rf_gain_limit < 0)	/*underflow */
+		state->rf_gain_limit = 0;
+
+	/* use gain as a temporary variable and correct current_gain */
+	gain = ((state->rf_gain_limit >> WBD_ALPHA) + state->bb_ramp[0]) << GAIN_ALPHA;
+	if (gain_delta >= ((s16) gain - state->current_gain))	/* overflow */
+		state->current_gain = gain;
+	else
+		state->current_gain += gain_delta;
+	/* cannot be less than 0 (only if gain_delta is less than 0 we can have current_gain < 0) */
+	if (state->current_gain < 0)
+		state->current_gain = 0;
+
+	/* now split total gain to rf and bb gain */
+	gain = state->current_gain >> GAIN_ALPHA;
+
+	/* requested gain is bigger than rf gain limit - ACI/WBD adjustment */
+	if (gain > (state->rf_gain_limit >> WBD_ALPHA)) {
+		rf = state->rf_gain_limit >> WBD_ALPHA;
+		bb = gain - rf;
+		if (bb > state->bb_ramp[0])
+			bb = state->bb_ramp[0];
+	} else {		/* high signal level -> all gains put on RF */
+		rf = gain;
+		bb = 0;
+	}
+
+	state->gain[0] = rf;
+	state->gain[1] = bb;
+
+	/* software ramp */
+	/* Start with RF gains */
+	g = state->rf_ramp + 1;	/* point on RF LNA1 max gain */
+	ref = rf;
+	for (i = 0; i < 7; i++) {	/* Go over all amplifiers => 5RF amps + 2 BB amps = 7 amps */
+		if (g[0] == 0 || ref < (g[1] - g[0]))	/* if total gain of the current amp is null or this amp is not concerned because it starts to work from an higher gain value */
+			v = 0;	/* force the gain to write for the current amp to be null */
+		else if (ref >= g[1])	/* Gain to set is higher than the high working point of this amp */
+			v = g[2];	/* force this amp to be full gain */
+		else		/* compute the value to set to this amp because we are somewhere in his range */
+			v = ((ref - (g[1] - g[0])) * g[2]) / g[0];
+
+		if (i == 0)	/* LNA 1 reg mapping */
+			gain_reg[0] = v;
+		else if (i == 1)	/* LNA 2 reg mapping */
+			gain_reg[0] |= v << 7;
+		else if (i == 2)	/* LNA 3 reg mapping */
+			gain_reg[1] = v;
+		else if (i == 3)	/* LNA 4 reg mapping */
+			gain_reg[1] |= v << 7;
+		else if (i == 4)	/* CBAND LNA reg mapping */
+			gain_reg[2] = v | state->rf_lt_def;
+		else if (i == 5)	/* BB gain 1 reg mapping */
+			gain_reg[3] = v << 3;
+		else if (i == 6)	/* BB gain 2 reg mapping */
+			gain_reg[3] |= v << 8;
+
+		g += 3;		/* go to next gain bloc */
+
+		/* When RF is finished, start with BB */
+		if (i == 4) {
+			g = state->bb_ramp + 1;	/* point on BB gain 1 max gain */
+			ref = bb;
+		}
+	}
+	gain_reg[3] |= state->bb_1_def;
+	gain_reg[3] |= ((bb % 10) * 100) / 125;
+
+#ifdef DEBUG_AGC
+	dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x\n", rf, bb, rf + bb,
+		gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]);
+#endif
+
+	/* Write the amplifier regs */
+	for (i = 0; i < 4; i++) {
+		v = gain_reg[i];
+		if (force || state->gain_reg[i] != v) {
+			state->gain_reg[i] = v;
+			dib0090_write_reg(state, gain_reg_addr[i], v);
+		}
+	}
+}
+
+static void dib0090_set_boost(struct dib0090_state *state, int onoff)
+{
+	state->bb_1_def &= 0xdfff;
+	state->bb_1_def |= onoff << 13;
+}
+
+static void dib0090_set_rframp(struct dib0090_state *state, const u16 * cfg)
+{
+	state->rf_ramp = cfg;
+}
+
+static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg)
+{
+	state->rf_ramp = cfg;
+
+	dib0090_write_reg(state, 0x2a, 0xffff);
+
+	dprintk("total RF gain: %ddB, step: %d\n", (u32) cfg[0], dib0090_read_reg(state, 0x2a));
+
+	dib0090_write_regs(state, 0x2c, cfg + 3, 6);
+	dib0090_write_regs(state, 0x3e, cfg + 9, 2);
+}
+
+static void dib0090_set_bbramp(struct dib0090_state *state, const u16 * cfg)
+{
+	state->bb_ramp = cfg;
+	dib0090_set_boost(state, cfg[0] > 500);	/* we want the boost if the gain is higher that 50dB */
+}
+
+static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg)
+{
+	state->bb_ramp = cfg;
+
+	dib0090_set_boost(state, cfg[0] > 500);	/* we want the boost if the gain is higher that 50dB */
+
+	dib0090_write_reg(state, 0x33, 0xffff);
+	dprintk("total BB gain: %ddB, step: %d\n", (u32) cfg[0], dib0090_read_reg(state, 0x33));
+	dib0090_write_regs(state, 0x35, cfg + 3, 4);
+}
+
+void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	const u16 *bb_ramp = bb_ramp_pwm_normal; /* default baseband config */
+	const u16 *rf_ramp = NULL;
+	u8 en_pwm_rf_mux = 1;
+
+	/* reset the AGC */
+	if (state->config->use_pwm_agc) {
+		if (state->current_band == BAND_CBAND) {
+			if (state->identity.in_soc) {
+				bb_ramp = bb_ramp_pwm_normal_socs;
+				if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+					rf_ramp = rf_ramp_pwm_cband_8090;
+				else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1) {
+					if (state->config->is_dib7090e) {
+						if (state->rf_ramp == NULL)
+							rf_ramp = rf_ramp_pwm_cband_7090e_sensitivity;
+						else
+							rf_ramp = state->rf_ramp;
+					} else
+						rf_ramp = rf_ramp_pwm_cband_7090p;
+				}
+			} else
+				rf_ramp = rf_ramp_pwm_cband;
+		} else
+
+			if (state->current_band == BAND_VHF) {
+				if (state->identity.in_soc) {
+					bb_ramp = bb_ramp_pwm_normal_socs;
+					/* rf_ramp = &rf_ramp_pwm_vhf_socs; */ /* TODO */
+				} else
+					rf_ramp = rf_ramp_pwm_vhf;
+			} else if (state->current_band == BAND_UHF) {
+				if (state->identity.in_soc) {
+					bb_ramp = bb_ramp_pwm_normal_socs;
+					if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+						rf_ramp = rf_ramp_pwm_uhf_8090;
+					else if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1)
+						rf_ramp = rf_ramp_pwm_uhf_7090;
+				} else
+					rf_ramp = rf_ramp_pwm_uhf;
+			}
+		if (rf_ramp)
+			dib0090_set_rframp_pwm(state, rf_ramp);
+		dib0090_set_bbramp_pwm(state, bb_ramp);
+
+		/* activate the ramp generator using PWM control */
+		if (state->rf_ramp)
+			dprintk("ramp RF gain = %d BAND = %s version = %d\n",
+				state->rf_ramp[0],
+				(state->current_band == BAND_CBAND) ? "CBAND" : "NOT CBAND",
+				state->identity.version & 0x1f);
+
+		if (rf_ramp && ((state->rf_ramp && state->rf_ramp[0] == 0) ||
+		    (state->current_band == BAND_CBAND &&
+		    (state->identity.version & 0x1f) <= P1D_E_F))) {
+			dprintk("DE-Engage mux for direct gain reg control\n");
+			en_pwm_rf_mux = 0;
+		} else
+			dprintk("Engage mux for PWM control\n");
+
+		dib0090_write_reg(state, 0x32, (en_pwm_rf_mux << 12) | (en_pwm_rf_mux << 11));
+
+		/* Set fast servo cutoff to start AGC; 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast*/
+		if (state->identity.version == SOC_7090_P1G_11R1 || state->identity.version == SOC_7090_P1G_21R1)
+			dib0090_write_reg(state, 0x04, 3);
+		else
+			dib0090_write_reg(state, 0x04, 1);
+		dib0090_write_reg(state, 0x39, (1 << 10)); /* 0 gain by default */
+	}
+}
+EXPORT_SYMBOL(dib0090_pwm_gain_reset);
+
+void dib0090_set_dc_servo(struct dvb_frontend *fe, u8 DC_servo_cutoff)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	if (DC_servo_cutoff < 4)
+		dib0090_write_reg(state, 0x04, DC_servo_cutoff);
+}
+EXPORT_SYMBOL(dib0090_set_dc_servo);
+
+static u32 dib0090_get_slow_adc_val(struct dib0090_state *state)
+{
+	u16 adc_val = dib0090_read_reg(state, 0x1d);
+	if (state->identity.in_soc)
+		adc_val >>= 2;
+	return adc_val;
+}
+
+int dib0090_gain_control(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	enum frontend_tune_state *tune_state = &state->tune_state;
+	int ret = 10;
+
+	u16 wbd_val = 0;
+	u8 apply_gain_immediatly = 1;
+	s16 wbd_error = 0, adc_error = 0;
+
+	if (*tune_state == CT_AGC_START) {
+		state->agc_freeze = 0;
+		dib0090_write_reg(state, 0x04, 0x0);
+
+#ifdef CONFIG_BAND_SBAND
+		if (state->current_band == BAND_SBAND) {
+			dib0090_set_rframp(state, rf_ramp_sband);
+			dib0090_set_bbramp(state, bb_ramp_boost);
+		} else
+#endif
+#ifdef CONFIG_BAND_VHF
+		if (state->current_band == BAND_VHF && !state->identity.p1g) {
+			dib0090_set_rframp(state, rf_ramp_pwm_vhf);
+			dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+		} else
+#endif
+#ifdef CONFIG_BAND_CBAND
+		if (state->current_band == BAND_CBAND && !state->identity.p1g) {
+			dib0090_set_rframp(state, rf_ramp_pwm_cband);
+			dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+		} else
+#endif
+		if ((state->current_band == BAND_CBAND || state->current_band == BAND_VHF) && state->identity.p1g) {
+			dib0090_set_rframp(state, rf_ramp_pwm_cband_7090p);
+			dib0090_set_bbramp(state, bb_ramp_pwm_normal_socs);
+		} else {
+			dib0090_set_rframp(state, rf_ramp_pwm_uhf);
+			dib0090_set_bbramp(state, bb_ramp_pwm_normal);
+		}
+
+		dib0090_write_reg(state, 0x32, 0);
+		dib0090_write_reg(state, 0x39, 0);
+
+		dib0090_wbd_target(state, state->current_rf);
+
+		state->rf_gain_limit = state->rf_ramp[0] << WBD_ALPHA;
+		state->current_gain = ((state->rf_ramp[0] + state->bb_ramp[0]) / 2) << GAIN_ALPHA;
+
+		*tune_state = CT_AGC_STEP_0;
+	} else if (!state->agc_freeze) {
+		s16 wbd = 0, i, cnt;
+
+		int adc;
+		wbd_val = dib0090_get_slow_adc_val(state);
+
+		if (*tune_state == CT_AGC_STEP_0)
+			cnt = 5;
+		else
+			cnt = 1;
+
+		for (i = 0; i < cnt; i++) {
+			wbd_val = dib0090_get_slow_adc_val(state);
+			wbd += dib0090_wbd_to_db(state, wbd_val);
+		}
+		wbd /= cnt;
+		wbd_error = state->wbd_target - wbd;
+
+		if (*tune_state == CT_AGC_STEP_0) {
+			if (wbd_error < 0 && state->rf_gain_limit > 0 && !state->identity.p1g) {
+#ifdef CONFIG_BAND_CBAND
+				/* in case of CBAND tune reduce first the lt_gain2 before adjusting the RF gain */
+				u8 ltg2 = (state->rf_lt_def >> 10) & 0x7;
+				if (state->current_band == BAND_CBAND && ltg2) {
+					ltg2 >>= 1;
+					state->rf_lt_def &= ltg2 << 10;	/* reduce in 3 steps from 7 to 0 */
+				}
+#endif
+			} else {
+				state->agc_step = 0;
+				*tune_state = CT_AGC_STEP_1;
+			}
+		} else {
+			/* calc the adc power */
+			adc = state->config->get_adc_power(fe);
+			adc = (adc * ((s32) 355774) + (((s32) 1) << 20)) >> 21;	/* included in [0:-700] */
+
+			adc_error = (s16) (((s32) ADC_TARGET) - adc);
+#ifdef CONFIG_STANDARD_DAB
+			if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB)
+				adc_error -= 10;
+#endif
+#ifdef CONFIG_STANDARD_DVBT
+			if (state->fe->dtv_property_cache.delivery_system == STANDARD_DVBT &&
+					(state->fe->dtv_property_cache.modulation == QAM_64 || state->fe->dtv_property_cache.modulation == QAM_16))
+				adc_error += 60;
+#endif
+#ifdef CONFIG_SYS_ISDBT
+			if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) && (((state->fe->dtv_property_cache.layer[0].segment_count >
+								0)
+							&&
+							((state->fe->dtv_property_cache.layer[0].modulation ==
+							  QAM_64)
+							 || (state->fe->dtv_property_cache.
+								 layer[0].modulation == QAM_16)))
+						||
+						((state->fe->dtv_property_cache.layer[1].segment_count >
+						  0)
+						 &&
+						 ((state->fe->dtv_property_cache.layer[1].modulation ==
+						   QAM_64)
+						  || (state->fe->dtv_property_cache.
+							  layer[1].modulation == QAM_16)))
+						||
+						((state->fe->dtv_property_cache.layer[2].segment_count >
+						  0)
+						 &&
+						 ((state->fe->dtv_property_cache.layer[2].modulation ==
+						   QAM_64)
+						  || (state->fe->dtv_property_cache.
+							  layer[2].modulation == QAM_16)))
+						)
+				)
+				adc_error += 60;
+#endif
+
+			if (*tune_state == CT_AGC_STEP_1) {	/* quickly go to the correct range of the ADC power */
+				if (abs(adc_error) < 50 || state->agc_step++ > 5) {
+
+#ifdef CONFIG_STANDARD_DAB
+					if (state->fe->dtv_property_cache.delivery_system == STANDARD_DAB) {
+						dib0090_write_reg(state, 0x02, (1 << 15) | (15 << 11) | (31 << 6) | (63));	/* cap value = 63 : narrow BB filter : Fc = 1.8MHz */
+						dib0090_write_reg(state, 0x04, 0x0);
+					} else
+#endif
+					{
+						dib0090_write_reg(state, 0x02, (1 << 15) | (3 << 11) | (6 << 6) | (32));
+						dib0090_write_reg(state, 0x04, 0x01);	/*0 = 1KHz ; 1 = 150Hz ; 2 = 50Hz ; 3 = 50KHz ; 4 = servo fast */
+					}
+
+					*tune_state = CT_AGC_STOP;
+				}
+			} else {
+				/* everything higher than or equal to CT_AGC_STOP means tracking */
+				ret = 100;	/* 10ms interval */
+				apply_gain_immediatly = 0;
+			}
+		}
+#ifdef DEBUG_AGC
+		dprintk
+			("tune state %d, ADC = %3ddB (ADC err %3d) WBD %3ddB (WBD err %3d, WBD val SADC: %4d), RFGainLimit (TOP): %3d, signal: %3ddBm",
+			 (u32) *tune_state, (u32) adc, (u32) adc_error, (u32) wbd, (u32) wbd_error, (u32) wbd_val,
+			 (u32) state->rf_gain_limit >> WBD_ALPHA, (s32) 200 + adc - (state->current_gain >> GAIN_ALPHA));
+#endif
+	}
+
+	/* apply gain */
+	if (!state->agc_freeze)
+		dib0090_gain_apply(state, adc_error, wbd_error, apply_gain_immediatly);
+	return ret;
+}
+
+EXPORT_SYMBOL(dib0090_gain_control);
+
+void dib0090_get_current_gain(struct dvb_frontend *fe, u16 * rf, u16 * bb, u16 * rf_gain_limit, u16 * rflt)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	if (rf)
+		*rf = state->gain[0];
+	if (bb)
+		*bb = state->gain[1];
+	if (rf_gain_limit)
+		*rf_gain_limit = state->rf_gain_limit;
+	if (rflt)
+		*rflt = (state->rf_lt_def >> 10) & 0x7;
+}
+
+EXPORT_SYMBOL(dib0090_get_current_gain);
+
+u16 dib0090_get_wbd_target(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	u32 f_MHz = state->fe->dtv_property_cache.frequency / 1000000;
+	s32 current_temp = state->temperature;
+	s32 wbd_thot, wbd_tcold;
+	const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+	while (f_MHz > wbd->max_freq)
+		wbd++;
+
+	dprintk("using wbd-table-entry with max freq %d\n", wbd->max_freq);
+
+	if (current_temp < 0)
+		current_temp = 0;
+	if (current_temp > 128)
+		current_temp = 128;
+
+	state->wbdmux &= ~(7 << 13);
+	if (wbd->wbd_gain != 0)
+		state->wbdmux |= (wbd->wbd_gain << 13);
+	else
+		state->wbdmux |= (4 << 13);
+
+	dib0090_write_reg(state, 0x10, state->wbdmux);
+
+	wbd_thot = wbd->offset_hot - (((u32) wbd->slope_hot * f_MHz) >> 6);
+	wbd_tcold = wbd->offset_cold - (((u32) wbd->slope_cold * f_MHz) >> 6);
+
+	wbd_tcold += ((wbd_thot - wbd_tcold) * current_temp) >> 7;
+
+	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + wbd_tcold);
+	dprintk("wbd-target: %d dB\n", (u32) state->wbd_target);
+	dprintk("wbd offset applied is %d\n", wbd_tcold);
+
+	return state->wbd_offset + wbd_tcold;
+}
+EXPORT_SYMBOL(dib0090_get_wbd_target);
+
+u16 dib0090_get_wbd_offset(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	return state->wbd_offset;
+}
+EXPORT_SYMBOL(dib0090_get_wbd_offset);
+
+int dib0090_set_switch(struct dvb_frontend *fe, u8 sw1, u8 sw2, u8 sw3)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xfff8)
+			| ((sw3 & 1) << 2) | ((sw2 & 1) << 1) | (sw1 & 1));
+
+	return 0;
+}
+EXPORT_SYMBOL(dib0090_set_switch);
+
+int dib0090_set_vga(struct dvb_frontend *fe, u8 onoff)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x7fff)
+			| ((onoff & 1) << 15));
+	return 0;
+}
+EXPORT_SYMBOL(dib0090_set_vga);
+
+int dib0090_update_rframp_7090(struct dvb_frontend *fe, u8 cfg_sensitivity)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	if ((!state->identity.p1g) || (!state->identity.in_soc)
+			|| ((state->identity.version != SOC_7090_P1G_21R1)
+				&& (state->identity.version != SOC_7090_P1G_11R1))) {
+		dprintk("%s() function can only be used for dib7090P\n", __func__);
+		return -ENODEV;
+	}
+
+	if (cfg_sensitivity)
+		state->rf_ramp = rf_ramp_pwm_cband_7090e_sensitivity;
+	else
+		state->rf_ramp = rf_ramp_pwm_cband_7090e_aci;
+	dib0090_pwm_gain_reset(fe);
+
+	return 0;
+}
+EXPORT_SYMBOL(dib0090_update_rframp_7090);
+
+static const u16 dib0090_defaults[] = {
+
+	25, 0x01,
+	0x0000,
+	0x99a0,
+	0x6008,
+	0x0000,
+	0x8bcb,
+	0x0000,
+	0x0405,
+	0x0000,
+	0x0000,
+	0x0000,
+	0xb802,
+	0x0300,
+	0x2d12,
+	0xbac0,
+	0x7c00,
+	0xdbb9,
+	0x0954,
+	0x0743,
+	0x8000,
+	0x0001,
+	0x0040,
+	0x0100,
+	0x0000,
+	0xe910,
+	0x149e,
+
+	1, 0x1c,
+	0xff2d,
+
+	1, 0x39,
+	0x0000,
+
+	2, 0x1e,
+	0x07FF,
+	0x0007,
+
+	1, 0x24,
+	EN_UHF | EN_CRYSTAL,
+
+	2, 0x3c,
+	0x3ff,
+	0x111,
+	0
+};
+
+static const u16 dib0090_p1g_additionnal_defaults[] = {
+	1, 0x05,
+	0xabcd,
+
+	1, 0x11,
+	0x00b4,
+
+	1, 0x1c,
+	0xfffd,
+
+	1, 0x40,
+	0x108,
+	0
+};
+
+static void dib0090_set_default_config(struct dib0090_state *state, const u16 * n)
+{
+	u16 l, r;
+
+	l = pgm_read_word(n++);
+	while (l) {
+		r = pgm_read_word(n++);
+		do {
+			dib0090_write_reg(state, r, pgm_read_word(n++));
+			r++;
+		} while (--l);
+		l = pgm_read_word(n++);
+	}
+}
+
+#define CAP_VALUE_MIN (u8)  9
+#define CAP_VALUE_MAX (u8) 40
+#define HR_MIN	      (u8) 25
+#define HR_MAX	      (u8) 40
+#define POLY_MIN      (u8)  0
+#define POLY_MAX      (u8)  8
+
+static void dib0090_set_EFUSE(struct dib0090_state *state)
+{
+	u8 c, h, n;
+	u16 e2, e4;
+	u16 cal;
+
+	e2 = dib0090_read_reg(state, 0x26);
+	e4 = dib0090_read_reg(state, 0x28);
+
+	if ((state->identity.version == P1D_E_F) ||
+			(state->identity.version == P1G) || (e2 == 0xffff)) {
+
+		dib0090_write_reg(state, 0x22, 0x10);
+		cal = (dib0090_read_reg(state, 0x22) >> 6) & 0x3ff;
+
+		if ((cal < 670) || (cal == 1023))
+			cal = 850;
+		n = 165 - ((cal * 10)>>6) ;
+		e2 = e4 = (3<<12) | (34<<6) | (n);
+	}
+
+	if (e2 != e4)
+		e2 &= e4; /* Remove the redundancy  */
+
+	if (e2 != 0xffff) {
+		c = e2 & 0x3f;
+		n = (e2 >> 12) & 0xf;
+		h = (e2 >> 6) & 0x3f;
+
+		if ((c >= CAP_VALUE_MAX) || (c <= CAP_VALUE_MIN))
+			c = 32;
+		else
+			c += 14;
+		if ((h >= HR_MAX) || (h <= HR_MIN))
+			h = 34;
+		if ((n >= POLY_MAX) || (n <= POLY_MIN))
+			n = 3;
+
+		dib0090_write_reg(state, 0x13, (h << 10));
+		e2 = (n << 11) | ((h >> 2)<<6) | c;
+		dib0090_write_reg(state, 0x2, e2); /* Load the BB_2 */
+	}
+}
+
+static int dib0090_reset(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	dib0090_reset_digital(fe, state->config);
+	if (dib0090_identify(fe) < 0)
+		return -EIO;
+
+#ifdef CONFIG_TUNER_DIB0090_P1B_SUPPORT
+	if (!(state->identity.version & 0x1))	/* it is P1B - reset is already done */
+		return 0;
+#endif
+
+	if (!state->identity.in_soc) {
+		if ((dib0090_read_reg(state, 0x1a) >> 5) & 0x2)
+			dib0090_write_reg(state, 0x1b, (EN_IQADC | EN_BB | EN_BIAS | EN_DIGCLK | EN_PLL | EN_CRYSTAL));
+		else
+			dib0090_write_reg(state, 0x1b, (EN_DIGCLK | EN_PLL | EN_CRYSTAL));
+	}
+
+	dib0090_set_default_config(state, dib0090_defaults);
+
+	if (state->identity.in_soc)
+		dib0090_write_reg(state, 0x18, 0x2910);  /* charge pump current = 0 */
+
+	if (state->identity.p1g)
+		dib0090_set_default_config(state, dib0090_p1g_additionnal_defaults);
+
+	/* Update the efuse : Only available for KROSUS > P1C  and SOC as well*/
+	if (((state->identity.version & 0x1f) >= P1D_E_F) || (state->identity.in_soc))
+		dib0090_set_EFUSE(state);
+
+	/* Congigure in function of the crystal */
+	if (state->config->force_crystal_mode != 0)
+		dib0090_write_reg(state, 0x14,
+				state->config->force_crystal_mode & 3);
+	else if (state->config->io.clock_khz >= 24000)
+		dib0090_write_reg(state, 0x14, 1);
+	else
+		dib0090_write_reg(state, 0x14, 2);
+	dprintk("Pll lock : %d\n", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1);
+
+	state->calibrate = DC_CAL | WBD_CAL | TEMP_CAL;	/* enable iq-offset-calibration and wbd-calibration when tuning next time */
+
+	return 0;
+}
+
+#define steps(u) (((u) > 15) ? ((u)-16) : (u))
+#define INTERN_WAIT 10
+static int dib0090_get_offset(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+	int ret = INTERN_WAIT * 10;
+
+	switch (*tune_state) {
+	case CT_TUNER_STEP_2:
+		/* Turns to positive */
+		dib0090_write_reg(state, 0x1f, 0x7);
+		*tune_state = CT_TUNER_STEP_3;
+		break;
+
+	case CT_TUNER_STEP_3:
+		state->adc_diff = dib0090_read_reg(state, 0x1d);
+
+		/* Turns to negative */
+		dib0090_write_reg(state, 0x1f, 0x4);
+		*tune_state = CT_TUNER_STEP_4;
+		break;
+
+	case CT_TUNER_STEP_4:
+		state->adc_diff -= dib0090_read_reg(state, 0x1d);
+		*tune_state = CT_TUNER_STEP_5;
+		ret = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+struct dc_calibration {
+	u8 addr;
+	u8 offset;
+	u8 pga:1;
+	u16 bb1;
+	u8 i:1;
+};
+
+static const struct dc_calibration dc_table[] = {
+	/* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
+	{0x06, 5, 1, (1 << 13) | (0 << 8) | (26 << 3), 1},
+	{0x07, 11, 1, (1 << 13) | (0 << 8) | (26 << 3), 0},
+	/* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
+	{0x06, 0, 0, (1 << 13) | (29 << 8) | (26 << 3), 1},
+	{0x06, 10, 0, (1 << 13) | (29 << 8) | (26 << 3), 0},
+	{0},
+};
+
+static const struct dc_calibration dc_p1g_table[] = {
+	/* Step1 BB gain1= 26 with boost 1, gain 2 = 0 */
+	/* addr ; trim reg offset ; pga ; CTRL_BB1 value ; i or q */
+	{0x06, 5, 1, (1 << 13) | (0 << 8) | (15 << 3), 1},
+	{0x07, 11, 1, (1 << 13) | (0 << 8) | (15 << 3), 0},
+	/* Step 2 BB gain 1 = 26 with boost = 1 & gain 2 = 29 */
+	{0x06, 0, 0, (1 << 13) | (29 << 8) | (15 << 3), 1},
+	{0x06, 10, 0, (1 << 13) | (29 << 8) | (15 << 3), 0},
+	{0},
+};
+
+static void dib0090_set_trim(struct dib0090_state *state)
+{
+	u16 *val;
+
+	if (state->dc->addr == 0x07)
+		val = &state->bb7;
+	else
+		val = &state->bb6;
+
+	*val &= ~(0x1f << state->dc->offset);
+	*val |= state->step << state->dc->offset;
+
+	dib0090_write_reg(state, state->dc->addr, *val);
+}
+
+static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+	int ret = 0;
+	u16 reg;
+
+	switch (*tune_state) {
+	case CT_TUNER_START:
+		dprintk("Start DC offset calibration");
+
+		/* force vcm2 = 0.8V */
+		state->bb6 = 0;
+		state->bb7 = 0x040d;
+
+		/* the LNA AND LO are off */
+		reg = dib0090_read_reg(state, 0x24) & 0x0ffb;	/* shutdown lna and lo */
+		dib0090_write_reg(state, 0x24, reg);
+
+		state->wbdmux = dib0090_read_reg(state, 0x10);
+		dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x7 << 3) | 0x3);
+		dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
+
+		state->dc = dc_table;
+
+		if (state->identity.p1g)
+			state->dc = dc_p1g_table;
+
+		fallthrough;
+	case CT_TUNER_STEP_0:
+		dprintk("Start/continue DC calibration for %s path\n",
+			(state->dc->i == 1) ? "I" : "Q");
+		dib0090_write_reg(state, 0x01, state->dc->bb1);
+		dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7));
+
+		state->step = 0;
+		state->min_adc_diff = 1023;
+		*tune_state = CT_TUNER_STEP_1;
+		ret = 50;
+		break;
+
+	case CT_TUNER_STEP_1:
+		dib0090_set_trim(state);
+		*tune_state = CT_TUNER_STEP_2;
+		break;
+
+	case CT_TUNER_STEP_2:
+	case CT_TUNER_STEP_3:
+	case CT_TUNER_STEP_4:
+		ret = dib0090_get_offset(state, tune_state);
+		break;
+
+	case CT_TUNER_STEP_5:	/* found an offset */
+		dprintk("adc_diff = %d, current step= %d\n", (u32) state->adc_diff, state->step);
+		if (state->step == 0 && state->adc_diff < 0) {
+			state->min_adc_diff = -1023;
+			dprintk("Change of sign of the minimum adc diff\n");
+		}
+
+		dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d\n", state->adc_diff, state->min_adc_diff, state->step);
+
+		/* first turn for this frequency */
+		if (state->step == 0) {
+			if (state->dc->pga && state->adc_diff < 0)
+				state->step = 0x10;
+			if (state->dc->pga == 0 && state->adc_diff > 0)
+				state->step = 0x10;
+		}
+
+		/* Look for a change of Sign in the Adc_diff.min_adc_diff is used to STORE the setp N-1 */
+		if ((state->adc_diff & 0x8000) == (state->min_adc_diff & 0x8000) && steps(state->step) < 15) {
+			/* stop search when the delta the sign is changing and Steps =15 and Step=0 is force for continuance */
+			state->step++;
+			state->min_adc_diff = state->adc_diff;
+			*tune_state = CT_TUNER_STEP_1;
+		} else {
+			/* the minimum was what we have seen in the step before */
+			if (abs(state->adc_diff) > abs(state->min_adc_diff)) {
+				dprintk("Since adc_diff N = %d  > adc_diff step N-1 = %d, Come back one step\n", state->adc_diff, state->min_adc_diff);
+				state->step--;
+			}
+
+			dib0090_set_trim(state);
+			dprintk("BB Offset Cal, BBreg=%u,Offset=%d,Value Set=%d\n",
+				state->dc->addr, state->adc_diff, state->step);
+
+			state->dc++;
+			if (state->dc->addr == 0)	/* done */
+				*tune_state = CT_TUNER_STEP_6;
+			else
+				*tune_state = CT_TUNER_STEP_0;
+
+		}
+		break;
+
+	case CT_TUNER_STEP_6:
+		dib0090_write_reg(state, 0x07, state->bb7 & ~0x0008);
+		dib0090_write_reg(state, 0x1f, 0x7);
+		*tune_state = CT_TUNER_START;	/* reset done -> real tuning can now begin */
+		state->calibrate &= ~DC_CAL;
+		break;
+
+	default:
+		break;
+	}
+	return ret;
+}
+
+static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+	u8 wbd_gain;
+	const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+	switch (*tune_state) {
+	case CT_TUNER_START:
+		while (state->current_rf / 1000 > wbd->max_freq)
+			wbd++;
+		if (wbd->wbd_gain != 0)
+			wbd_gain = wbd->wbd_gain;
+		else {
+			wbd_gain = 4;
+#if defined(CONFIG_BAND_LBAND) || defined(CONFIG_BAND_SBAND)
+			if ((state->current_band == BAND_LBAND) || (state->current_band == BAND_SBAND))
+				wbd_gain = 2;
+#endif
+		}
+
+		if (wbd_gain == state->wbd_calibration_gain) {	/* the WBD calibration has already been done */
+			*tune_state = CT_TUNER_START;
+			state->calibrate &= ~WBD_CAL;
+			return 0;
+		}
+
+		dib0090_write_reg(state, 0x10, 0x1b81 | (1 << 10) | (wbd_gain << 13) | (1 << 3));
+
+		dib0090_write_reg(state, 0x24, ((EN_UHF & 0x0fff) | (1 << 1)));
+		*tune_state = CT_TUNER_STEP_0;
+		state->wbd_calibration_gain = wbd_gain;
+		return 90;	/* wait for the WBDMUX to switch and for the ADC to sample */
+
+	case CT_TUNER_STEP_0:
+		state->wbd_offset = dib0090_get_slow_adc_val(state);
+		dprintk("WBD calibration offset = %d\n", state->wbd_offset);
+		*tune_state = CT_TUNER_START;	/* reset done -> real tuning can now begin */
+		state->calibrate &= ~WBD_CAL;
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void dib0090_set_bandwidth(struct dib0090_state *state)
+{
+	u16 tmp;
+
+	if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 5000)
+		tmp = (3 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 6000)
+		tmp = (2 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 <= 7000)
+		tmp = (1 << 14);
+	else
+		tmp = (0 << 14);
+
+	state->bb_1_def &= 0x3fff;
+	state->bb_1_def |= tmp;
+
+	dib0090_write_reg(state, 0x01, state->bb_1_def);	/* be sure that we have the right bb-filter */
+
+	dib0090_write_reg(state, 0x03, 0x6008);	/* = 0x6008 : vcm3_trim = 1 ; filter2_gm1_trim = 8 ; filter2_cutoff_freq = 0 */
+	dib0090_write_reg(state, 0x04, 0x1);	/* 0 = 1KHz ; 1 = 50Hz ; 2 = 150Hz ; 3 = 50KHz ; 4 = servo fast */
+	if (state->identity.in_soc) {
+		dib0090_write_reg(state, 0x05, 0x9bcf); /* attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 1 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 15 */
+	} else {
+		dib0090_write_reg(state, 0x02, (5 << 11) | (8 << 6) | (22 & 0x3f));	/* 22 = cap_value */
+		dib0090_write_reg(state, 0x05, 0xabcd);	/* = 0xabcd : attenuator_ibias_tri = 2 ; input_stage_ibias_tr = 2 ; nc = 11 ; ext_gm_trim = 1 ; obuf_ibias_trim = 4 ; filter13_gm2_ibias_t = 13 */
+	}
+}
+
+static const struct dib0090_pll dib0090_pll_table[] = {
+#ifdef CONFIG_BAND_CBAND
+	{56000, 0, 9, 48, 6},
+	{70000, 1, 9, 48, 6},
+	{87000, 0, 8, 32, 4},
+	{105000, 1, 8, 32, 4},
+	{115000, 0, 7, 24, 6},
+	{140000, 1, 7, 24, 6},
+	{170000, 0, 6, 16, 4},
+#endif
+#ifdef CONFIG_BAND_VHF
+	{200000, 1, 6, 16, 4},
+	{230000, 0, 5, 12, 6},
+	{280000, 1, 5, 12, 6},
+	{340000, 0, 4, 8, 4},
+	{380000, 1, 4, 8, 4},
+	{450000, 0, 3, 6, 6},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{580000, 1, 3, 6, 6},
+	{700000, 0, 2, 4, 4},
+	{860000, 1, 2, 4, 4},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1800000, 1, 0, 2, 4},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2900000, 0, 14, 1, 4},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_fm_vhf_on_cband[] = {
+
+#ifdef CONFIG_BAND_CBAND
+	{184000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+	{227000, 4, 3, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+	{380000, 4, 7, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table[] = {
+
+#ifdef CONFIG_BAND_CBAND
+	{170000, 4, 1, 15, 0x280, 0x2912, 0xb94e, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_VHF
+	{184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+	{227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+	{380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_p1g_tuning_table[] = {
+#ifdef CONFIG_BAND_CBAND
+	{170000, 4, 1, 0x820f, 0x300, 0x2d22, 0x82cb, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_VHF
+	{184000, 1, 1, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+	{227000, 1, 3, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+	{380000, 1, 7, 15, 0x300, 0x4d12, 0xb94e, EN_VHF},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{510000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{540000, 2, 1, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{600000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{630000, 2, 4, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{680000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{720000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_pll dib0090_p1g_pll_table[] = {
+#ifdef CONFIG_BAND_CBAND
+	{57000, 0, 11, 48, 6},
+	{70000, 1, 11, 48, 6},
+	{86000, 0, 10, 32, 4},
+	{105000, 1, 10, 32, 4},
+	{115000, 0, 9, 24, 6},
+	{140000, 1, 9, 24, 6},
+	{170000, 0, 8, 16, 4},
+#endif
+#ifdef CONFIG_BAND_VHF
+	{200000, 1, 8, 16, 4},
+	{230000, 0, 7, 12, 6},
+	{280000, 1, 7, 12, 6},
+	{340000, 0, 6, 8, 4},
+	{380000, 1, 6, 8, 4},
+	{455000, 0, 5, 6, 6},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{580000, 1, 5, 6, 6},
+	{680000, 0, 4, 4, 4},
+	{860000, 1, 4, 4, 4},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1800000, 1, 2, 2, 4},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2900000, 0, 1, 1, 6},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_p1g_tuning_table_fm_vhf_on_cband[] = {
+#ifdef CONFIG_BAND_CBAND
+	{184000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+	{227000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+	{380000, 4, 3, 0x4187, 0x2c0, 0x2d22, 0x81cb, EN_CAB},
+#endif
+#ifdef CONFIG_BAND_UHF
+	{520000, 2, 0, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{550000, 2, 2, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{650000, 2, 3, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{750000, 2, 5, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{850000, 2, 6, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+	{900000, 2, 7, 15, 0x300, 0x1d12, 0xb9ce, EN_UHF},
+#endif
+#ifdef CONFIG_BAND_LBAND
+	{1500000, 4, 0, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1600000, 4, 1, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+	{1800000, 4, 3, 20, 0x300, 0x1912, 0x82c9, EN_LBD},
+#endif
+#ifdef CONFIG_BAND_SBAND
+	{2300000, 1, 4, 20, 0x300, 0x2d2A, 0x82c7, EN_SBD},
+	{2900000, 1, 7, 20, 0x280, 0x2deb, 0x8347, EN_SBD},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_cband_7090[] = {
+#ifdef CONFIG_BAND_CBAND
+	{300000, 4, 3, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+	{380000, 4, 10, 0x018F, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+	{570000, 4, 10, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+	{858000, 4, 5, 0x8190, 0x2c0, 0x2d22, 0xb9ce, EN_CAB},
+#endif
+};
+
+static const struct dib0090_tuning dib0090_tuning_table_cband_7090e_sensitivity[] = {
+#ifdef CONFIG_BAND_CBAND
+	{ 300000,  0 ,  3,  0x8105, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+	{ 380000,  0 ,  10, 0x810F, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+	{ 600000,  0 ,  10, 0x815E, 0x280, 0x2d12, 0xb84e, EN_CAB },
+	{ 660000,  0 ,  5,  0x85E3, 0x280, 0x2d12, 0xb84e, EN_CAB },
+	{ 720000,  0 ,  5,  0x852E, 0x280, 0x2d12, 0xb84e, EN_CAB },
+	{ 860000,  0 ,  4,  0x85E5, 0x280, 0x2d12, 0xb84e, EN_CAB },
+#endif
+};
+
+int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
+		u8 cfg_sensitivity)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	const struct dib0090_tuning *tune =
+		dib0090_tuning_table_cband_7090e_sensitivity;
+	static const struct dib0090_tuning dib0090_tuning_table_cband_7090e_aci[] = {
+		{ 300000,  0 ,  3,  0x8165, 0x2c0, 0x2d12, 0xb84e, EN_CAB },
+		{ 650000,  0 ,  4,  0x815B, 0x280, 0x2d12, 0xb84e, EN_CAB },
+		{ 860000,  0 ,  5,  0x84EF, 0x280, 0x2d12, 0xb84e, EN_CAB },
+	};
+
+	if ((!state->identity.p1g) || (!state->identity.in_soc)
+			|| ((state->identity.version != SOC_7090_P1G_21R1)
+				&& (state->identity.version != SOC_7090_P1G_11R1))) {
+		dprintk("%s() function can only be used for dib7090\n", __func__);
+		return -ENODEV;
+	}
+
+	if (cfg_sensitivity)
+		tune = dib0090_tuning_table_cband_7090e_sensitivity;
+	else
+		tune = dib0090_tuning_table_cband_7090e_aci;
+
+	while (state->rf_request > tune->max_freq)
+		tune++;
+
+	dib0090_write_reg(state, 0x09, (dib0090_read_reg(state, 0x09) & 0x8000)
+			| (tune->lna_bias & 0x7fff));
+	dib0090_write_reg(state, 0x0b, (dib0090_read_reg(state, 0x0b) & 0xf83f)
+			| ((tune->lna_tune << 6) & 0x07c0));
+	return 0;
+}
+EXPORT_SYMBOL(dib0090_update_tuning_table_7090);
+
+static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+	int ret = 0;
+	u16 lo4 = 0xe900;
+
+	s16 adc_target;
+	u16 adc;
+	s8 step_sign;
+	u8 force_soft_search = 0;
+
+	if (state->identity.version == SOC_8090_P1G_11R1 || state->identity.version == SOC_8090_P1G_21R1)
+		force_soft_search = 1;
+
+	if (*tune_state == CT_TUNER_START) {
+		dprintk("Start Captrim search : %s\n",
+			(force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO");
+		dib0090_write_reg(state, 0x10, 0x2B1);
+		dib0090_write_reg(state, 0x1e, 0x0032);
+
+		if (!state->tuner_is_tuned) {
+			/* prepare a complete captrim */
+			if (!state->identity.p1g || force_soft_search)
+				state->step = state->captrim = state->fcaptrim = 64;
+
+			state->current_rf = state->rf_request;
+		} else {	/* we are already tuned to this frequency - the configuration is correct  */
+			if (!state->identity.p1g || force_soft_search) {
+				/* do a minimal captrim even if the frequency has not changed */
+				state->step = 4;
+				state->captrim = state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7f;
+			}
+		}
+		state->adc_diff = 3000;
+		*tune_state = CT_TUNER_STEP_0;
+
+	} else if (*tune_state == CT_TUNER_STEP_0) {
+		if (state->identity.p1g && !force_soft_search) {
+			u8 ratio = 31;
+
+			dib0090_write_reg(state, 0x40, (3 << 7) | (ratio << 2) | (1 << 1) | 1);
+			dib0090_read_reg(state, 0x40);
+			ret = 50;
+		} else {
+			state->step /= 2;
+			dib0090_write_reg(state, 0x18, lo4 | state->captrim);
+
+			if (state->identity.in_soc)
+				ret = 25;
+		}
+		*tune_state = CT_TUNER_STEP_1;
+
+	} else if (*tune_state == CT_TUNER_STEP_1) {
+		if (state->identity.p1g && !force_soft_search) {
+			dib0090_write_reg(state, 0x40, 0x18c | (0 << 1) | 0);
+			dib0090_read_reg(state, 0x40);
+
+			state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7F;
+			dprintk("***Final Captrim= 0x%x\n", state->fcaptrim);
+			*tune_state = CT_TUNER_STEP_3;
+
+		} else {
+			/* MERGE for all krosus before P1G */
+			adc = dib0090_get_slow_adc_val(state);
+			dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV\n", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024);
+
+			if (state->rest == 0 || state->identity.in_soc) {	/* Just for 8090P SOCS where auto captrim HW bug : TO CHECK IN ACI for SOCS !!! if 400 for 8090p SOC => tune issue !!! */
+				adc_target = 200;
+			} else
+				adc_target = 400;
+
+			if (adc >= adc_target) {
+				adc -= adc_target;
+				step_sign = -1;
+			} else {
+				adc = adc_target - adc;
+				step_sign = 1;
+			}
+
+			if (adc < state->adc_diff) {
+				dprintk("CAPTRIM=%d is closer to target (%d/%d)\n", (u32) state->captrim, (u32) adc, (u32) state->adc_diff);
+				state->adc_diff = adc;
+				state->fcaptrim = state->captrim;
+			}
+
+			state->captrim += step_sign * state->step;
+			if (state->step >= 1)
+				*tune_state = CT_TUNER_STEP_0;
+			else
+				*tune_state = CT_TUNER_STEP_2;
+
+			ret = 25;
+		}
+	} else if (*tune_state == CT_TUNER_STEP_2) {	/* this step is only used by krosus < P1G */
+		/*write the final cptrim config */
+		dib0090_write_reg(state, 0x18, lo4 | state->fcaptrim);
+
+		*tune_state = CT_TUNER_STEP_3;
+
+	} else if (*tune_state == CT_TUNER_STEP_3) {
+		state->calibrate &= ~CAPTRIM_CAL;
+		*tune_state = CT_TUNER_STEP_0;
+	}
+
+	return ret;
+}
+
+static int dib0090_get_temperature(struct dib0090_state *state, enum frontend_tune_state *tune_state)
+{
+	int ret = 15;
+	s16 val;
+
+	switch (*tune_state) {
+	case CT_TUNER_START:
+		state->wbdmux = dib0090_read_reg(state, 0x10);
+		dib0090_write_reg(state, 0x10, (state->wbdmux & ~(0xff << 3)) | (0x8 << 3));
+
+		state->bias = dib0090_read_reg(state, 0x13);
+		dib0090_write_reg(state, 0x13, state->bias | (0x3 << 8));
+
+		*tune_state = CT_TUNER_STEP_0;
+		/* wait for the WBDMUX to switch and for the ADC to sample */
+		break;
+
+	case CT_TUNER_STEP_0:
+		state->adc_diff = dib0090_get_slow_adc_val(state);
+		dib0090_write_reg(state, 0x13, (state->bias & ~(0x3 << 8)) | (0x2 << 8));
+		*tune_state = CT_TUNER_STEP_1;
+		break;
+
+	case CT_TUNER_STEP_1:
+		val = dib0090_get_slow_adc_val(state);
+		state->temperature = ((s16) ((val - state->adc_diff) * 180) >> 8) + 55;
+
+		dprintk("temperature: %d C\n", state->temperature - 30);
+
+		*tune_state = CT_TUNER_STEP_2;
+		break;
+
+	case CT_TUNER_STEP_2:
+		dib0090_write_reg(state, 0x13, state->bias);
+		dib0090_write_reg(state, 0x10, state->wbdmux);	/* write back original WBDMUX */
+
+		*tune_state = CT_TUNER_START;
+		state->calibrate &= ~TEMP_CAL;
+		if (state->config->analog_output == 0)
+			dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+
+		break;
+
+	default:
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+#define WBD     0x781		/* 1 1 1 1 0000 0 0 1 */
+static int dib0090_tune(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	const struct dib0090_tuning *tune = state->current_tune_table_index;
+	const struct dib0090_pll *pll = state->current_pll_table_index;
+	enum frontend_tune_state *tune_state = &state->tune_state;
+
+	u16 lo5, lo6, Den, tmp;
+	u32 FBDiv, Rest, FREF, VCOF_kHz = 0;
+	int ret = 10;		/* 1ms is the default delay most of the time */
+	u8 c, i;
+
+	/************************* VCO ***************************/
+	/* Default values for FG                                 */
+	/* from these are needed :                               */
+	/* Cp,HFdiv,VCOband,SD,Num,Den,FB and REFDiv             */
+
+	/* in any case we first need to do a calibration if needed */
+	if (*tune_state == CT_TUNER_START) {
+		/* deactivate DataTX before some calibrations */
+		if (state->calibrate & (DC_CAL | TEMP_CAL | WBD_CAL))
+			dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) & ~(1 << 14));
+		else
+			/* Activate DataTX in case a calibration has been done before */
+			if (state->config->analog_output == 0)
+				dib0090_write_reg(state, 0x23, dib0090_read_reg(state, 0x23) | (1 << 14));
+	}
+
+	if (state->calibrate & DC_CAL)
+		return dib0090_dc_offset_calibration(state, tune_state);
+	else if (state->calibrate & WBD_CAL) {
+		if (state->current_rf == 0)
+			state->current_rf = state->fe->dtv_property_cache.frequency / 1000;
+		return dib0090_wbd_calibration(state, tune_state);
+	} else if (state->calibrate & TEMP_CAL)
+		return dib0090_get_temperature(state, tune_state);
+	else if (state->calibrate & CAPTRIM_CAL)
+		return dib0090_captrim_search(state, tune_state);
+
+	if (*tune_state == CT_TUNER_START) {
+		/* if soc and AGC pwm control, disengage mux to be able to R/W access to 0x01 register to set the right filter (cutoff_freq_select) during the tune sequence, otherwise, SOC SERPAR error when accessing to 0x01 */
+		if (state->config->use_pwm_agc && state->identity.in_soc) {
+			tmp = dib0090_read_reg(state, 0x39);
+			if ((tmp >> 10) & 0x1)
+				dib0090_write_reg(state, 0x39, tmp & ~(1 << 10));
+		}
+
+		state->current_band = (u8) BAND_OF_FREQUENCY(state->fe->dtv_property_cache.frequency / 1000);
+		state->rf_request =
+			state->fe->dtv_property_cache.frequency / 1000 + (state->current_band ==
+					BAND_UHF ? state->config->freq_offset_khz_uhf : state->config->
+					freq_offset_khz_vhf);
+
+		/* in ISDB-T 1seg we shift tuning frequency */
+		if ((state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1
+					&& state->fe->dtv_property_cache.isdbt_partial_reception == 0)) {
+			const struct dib0090_low_if_offset_table *LUT_offset = state->config->low_if;
+			u8 found_offset = 0;
+			u32 margin_khz = 100;
+
+			if (LUT_offset != NULL) {
+				while (LUT_offset->RF_freq != 0xffff) {
+					if (((state->rf_request > (LUT_offset->RF_freq - margin_khz))
+								&& (state->rf_request < (LUT_offset->RF_freq + margin_khz)))
+							&& LUT_offset->std == state->fe->dtv_property_cache.delivery_system) {
+						state->rf_request += LUT_offset->offset_khz;
+						found_offset = 1;
+						break;
+					}
+					LUT_offset++;
+				}
+			}
+
+			if (found_offset == 0)
+				state->rf_request += 400;
+		}
+		if (state->current_rf != state->rf_request || (state->current_standard != state->fe->dtv_property_cache.delivery_system)) {
+			state->tuner_is_tuned = 0;
+			state->current_rf = 0;
+			state->current_standard = 0;
+
+			tune = dib0090_tuning_table;
+			if (state->identity.p1g)
+				tune = dib0090_p1g_tuning_table;
+
+			tmp = (state->identity.version >> 5) & 0x7;
+
+			if (state->identity.in_soc) {
+				if (state->config->force_cband_input) {	/* Use the CBAND input for all band */
+					if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF
+							|| state->current_band & BAND_UHF) {
+						state->current_band = BAND_CBAND;
+						if (state->config->is_dib7090e)
+							tune = dib0090_tuning_table_cband_7090e_sensitivity;
+						else
+							tune = dib0090_tuning_table_cband_7090;
+					}
+				} else {	/* Use the CBAND input for all band under UHF */
+					if (state->current_band & BAND_CBAND || state->current_band & BAND_FM || state->current_band & BAND_VHF) {
+						state->current_band = BAND_CBAND;
+						if (state->config->is_dib7090e)
+							tune = dib0090_tuning_table_cband_7090e_sensitivity;
+						else
+							tune = dib0090_tuning_table_cband_7090;
+					}
+				}
+			} else
+			 if (tmp == 0x4 || tmp == 0x7) {
+				/* CBAND tuner version for VHF */
+				if (state->current_band == BAND_FM || state->current_band == BAND_CBAND || state->current_band == BAND_VHF) {
+					state->current_band = BAND_CBAND;	/* Force CBAND */
+
+					tune = dib0090_tuning_table_fm_vhf_on_cband;
+					if (state->identity.p1g)
+						tune = dib0090_p1g_tuning_table_fm_vhf_on_cband;
+				}
+			}
+
+			pll = dib0090_pll_table;
+			if (state->identity.p1g)
+				pll = dib0090_p1g_pll_table;
+
+			/* Look for the interval */
+			while (state->rf_request > tune->max_freq)
+				tune++;
+			while (state->rf_request > pll->max_freq)
+				pll++;
+
+			state->current_tune_table_index = tune;
+			state->current_pll_table_index = pll;
+
+			dib0090_write_reg(state, 0x0b, 0xb800 | (tune->switch_trim));
+
+			VCOF_kHz = (pll->hfdiv * state->rf_request) * 2;
+
+			FREF = state->config->io.clock_khz;
+			if (state->config->fref_clock_ratio != 0)
+				FREF /= state->config->fref_clock_ratio;
+
+			FBDiv = (VCOF_kHz / pll->topresc / FREF);
+			Rest = (VCOF_kHz / pll->topresc) - FBDiv * FREF;
+
+			if (Rest < LPF)
+				Rest = 0;
+			else if (Rest < 2 * LPF)
+				Rest = 2 * LPF;
+			else if (Rest > (FREF - LPF)) {
+				Rest = 0;
+				FBDiv += 1;
+			} else if (Rest > (FREF - 2 * LPF))
+				Rest = FREF - 2 * LPF;
+			Rest = (Rest * 6528) / (FREF / 10);
+			state->rest = Rest;
+
+			/* external loop filter, otherwise:
+			 * lo5 = (0 << 15) | (0 << 12) | (0 << 11) | (3 << 9) | (4 << 6) | (3 << 4) | 4;
+			 * lo6 = 0x0e34 */
+
+			if (Rest == 0) {
+				if (pll->vco_band)
+					lo5 = 0x049f;
+				else
+					lo5 = 0x041f;
+			} else {
+				if (pll->vco_band)
+					lo5 = 0x049e;
+				else if (state->config->analog_output)
+					lo5 = 0x041d;
+				else
+					lo5 = 0x041c;
+			}
+
+			if (state->identity.p1g) {	/* Bias is done automatically in P1G */
+				if (state->identity.in_soc) {
+					if (state->identity.version == SOC_8090_P1G_11R1)
+						lo5 = 0x46f;
+					else
+						lo5 = 0x42f;
+				} else
+					lo5 = 0x42c;
+			}
+
+			lo5 |= (pll->hfdiv_code << 11) | (pll->vco_band << 7);	/* bit 15 is the split to the slave, we do not do it here */
+
+			if (!state->config->io.pll_int_loop_filt) {
+				if (state->identity.in_soc)
+					lo6 = 0xff98;
+				else if (state->identity.p1g || (Rest == 0))
+					lo6 = 0xfff8;
+				else
+					lo6 = 0xff28;
+			} else
+				lo6 = (state->config->io.pll_int_loop_filt << 3);
+
+			Den = 1;
+
+			if (Rest > 0) {
+				lo6 |= (1 << 2) | 2;
+				Den = 255;
+			}
+			dib0090_write_reg(state, 0x15, (u16) FBDiv);
+			if (state->config->fref_clock_ratio != 0)
+				dib0090_write_reg(state, 0x16, (Den << 8) | state->config->fref_clock_ratio);
+			else
+				dib0090_write_reg(state, 0x16, (Den << 8) | 1);
+			dib0090_write_reg(state, 0x17, (u16) Rest);
+			dib0090_write_reg(state, 0x19, lo5);
+			dib0090_write_reg(state, 0x1c, lo6);
+
+			lo6 = tune->tuner_enable;
+			if (state->config->analog_output)
+				lo6 = (lo6 & 0xff9f) | 0x2;
+
+			dib0090_write_reg(state, 0x24, lo6 | EN_LO | state->config->use_pwm_agc * EN_CRYSTAL);
+
+		}
+
+		state->current_rf = state->rf_request;
+		state->current_standard = state->fe->dtv_property_cache.delivery_system;
+
+		ret = 20;
+		state->calibrate = CAPTRIM_CAL;	/* captrim search now */
+	}
+
+	else if (*tune_state == CT_TUNER_STEP_0) {	/* Warning : because of captrim cal, if you change this step, change it also in _cal.c file because it is the step following captrim cal state machine */
+		const struct dib0090_wbd_slope *wbd = state->current_wbd_table;
+
+		while (state->current_rf / 1000 > wbd->max_freq)
+			wbd++;
+
+		dib0090_write_reg(state, 0x1e, 0x07ff);
+		dprintk("Final Captrim: %d\n", (u32) state->fcaptrim);
+		dprintk("HFDIV code: %d\n", (u32) pll->hfdiv_code);
+		dprintk("VCO = %d\n", (u32) pll->vco_band);
+		dprintk("VCOF in kHz: %d ((%d*%d) << 1))\n", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request);
+		dprintk("REFDIV: %d, FREF: %d\n", (u32) 1, (u32) state->config->io.clock_khz);
+		dprintk("FBDIV: %d, Rest: %d\n", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17));
+		dprintk("Num: %d, Den: %d, SD: %d\n", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8),
+			(u32) dib0090_read_reg(state, 0x1c) & 0x3);
+
+#define WBD     0x781		/* 1 1 1 1 0000 0 0 1 */
+		c = 4;
+		i = 3;
+
+		if (wbd->wbd_gain != 0)
+			c = wbd->wbd_gain;
+
+		state->wbdmux = (c << 13) | (i << 11) | (WBD | (state->config->use_pwm_agc << 1));
+		dib0090_write_reg(state, 0x10, state->wbdmux);
+
+		if ((tune->tuner_enable == EN_CAB) && state->identity.p1g) {
+			dprintk("P1G : The cable band is selected and lna_tune = %d\n", tune->lna_tune);
+			dib0090_write_reg(state, 0x09, tune->lna_bias);
+			dib0090_write_reg(state, 0x0b, 0xb800 | (tune->lna_tune << 6) | (tune->switch_trim));
+		} else
+			dib0090_write_reg(state, 0x09, (tune->lna_tune << 5) | tune->lna_bias);
+
+		dib0090_write_reg(state, 0x0c, tune->v2i);
+		dib0090_write_reg(state, 0x0d, tune->mix);
+		dib0090_write_reg(state, 0x0e, tune->load);
+		*tune_state = CT_TUNER_STEP_1;
+
+	} else if (*tune_state == CT_TUNER_STEP_1) {
+		/* initialize the lt gain register */
+		state->rf_lt_def = 0x7c00;
+
+		dib0090_set_bandwidth(state);
+		state->tuner_is_tuned = 1;
+
+		state->calibrate |= WBD_CAL;
+		state->calibrate |= TEMP_CAL;
+		*tune_state = CT_TUNER_STOP;
+	} else
+		ret = FE_CALLBACK_TIME_NEVER;
+	return ret;
+}
+
+static void dib0090_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+}
+
+enum frontend_tune_state dib0090_get_tune_state(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	return state->tune_state;
+}
+
+EXPORT_SYMBOL(dib0090_get_tune_state);
+
+int dib0090_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	state->tune_state = tune_state;
+	return 0;
+}
+
+EXPORT_SYMBOL(dib0090_set_tune_state);
+
+static int dib0090_get_frequency(struct dvb_frontend *fe, u32 * frequency)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+
+	*frequency = 1000 * state->current_rf;
+	return 0;
+}
+
+static int dib0090_set_params(struct dvb_frontend *fe)
+{
+	struct dib0090_state *state = fe->tuner_priv;
+	u32 ret;
+
+	state->tune_state = CT_TUNER_START;
+
+	do {
+		ret = dib0090_tune(fe);
+		if (ret == FE_CALLBACK_TIME_NEVER)
+			break;
+
+		/*
+		 * Despite dib0090_tune returns time at a 0.1 ms range,
+		 * the actual sleep time depends on CONFIG_HZ. The worse case
+		 * is when CONFIG_HZ=100. In such case, the minimum granularity
+		 * is 10ms. On some real field tests, the tuner sometimes don't
+		 * lock when this timer is lower than 10ms. So, enforce a 10ms
+		 * granularity and use usleep_range() instead of msleep().
+		 */
+		ret = 10 * (ret + 99)/100;
+		usleep_range(ret * 1000, (ret + 1) * 1000);
+	} while (state->tune_state != CT_TUNER_STOP);
+
+	return 0;
+}
+
+static const struct dvb_tuner_ops dib0090_ops = {
+	.info = {
+		 .name = "DiBcom DiB0090",
+		 .frequency_min_hz  =  45 * MHz,
+		 .frequency_max_hz  = 860 * MHz,
+		 .frequency_step_hz =   1 * kHz,
+		 },
+	.release = dib0090_release,
+
+	.init = dib0090_wakeup,
+	.sleep = dib0090_sleep,
+	.set_params = dib0090_set_params,
+	.get_frequency = dib0090_get_frequency,
+};
+
+static const struct dvb_tuner_ops dib0090_fw_ops = {
+	.info = {
+		 .name = "DiBcom DiB0090",
+		 .frequency_min_hz  =  45 * MHz,
+		 .frequency_max_hz  = 860 * MHz,
+		 .frequency_step_hz =   1 * kHz,
+		 },
+	.release = dib0090_release,
+
+	.init = NULL,
+	.sleep = NULL,
+	.set_params = NULL,
+	.get_frequency = NULL,
+};
+
+static const struct dib0090_wbd_slope dib0090_wbd_table_default[] = {
+	{470, 0, 250, 0, 100, 4},
+	{860, 51, 866, 21, 375, 4},
+	{1700, 0, 800, 0, 850, 4},
+	{2900, 0, 250, 0, 100, 6},
+	{0xFFFF, 0, 0, 0, 0, 0},
+};
+
+struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
+{
+	struct dib0090_state *st = kzalloc(sizeof(struct dib0090_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	st->config = config;
+	st->i2c = i2c;
+	st->fe = fe;
+	mutex_init(&st->i2c_buffer_lock);
+	fe->tuner_priv = st;
+
+	if (config->wbd == NULL)
+		st->current_wbd_table = dib0090_wbd_table_default;
+	else
+		st->current_wbd_table = config->wbd;
+
+	if (dib0090_reset(fe) != 0)
+		goto free_mem;
+
+	pr_info("DiB0090: successfully identified\n");
+	memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops));
+
+	return fe;
+ free_mem:
+	kfree(st);
+	fe->tuner_priv = NULL;
+	return NULL;
+}
+
+EXPORT_SYMBOL_GPL(dib0090_register);
+
+struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config)
+{
+	struct dib0090_fw_state *st = kzalloc(sizeof(struct dib0090_fw_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	st->config = config;
+	st->i2c = i2c;
+	st->fe = fe;
+	mutex_init(&st->i2c_buffer_lock);
+	fe->tuner_priv = st;
+
+	if (dib0090_fw_reset_digital(fe, st->config) != 0)
+		goto free_mem;
+
+	dprintk("DiB0090 FW: successfully identified\n");
+	memcpy(&fe->ops.tuner_ops, &dib0090_fw_ops, sizeof(struct dvb_tuner_ops));
+
+	return fe;
+free_mem:
+	kfree(st);
+	fe->tuner_priv = NULL;
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(dib0090_fw_register);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_AUTHOR("Olivier Grenie <olivier.grenie@parrot.com>");
+MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner");
+MODULE_LICENSE("GPL");