Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 964 insertions, 0 deletions

diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c
new file mode 100644
index 0000000000..4cb890b949
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c
@@ -0,0 +1,964 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Bt8xx based DVB adapter driver
+ *
+ * Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+#include <media/dmxdev.h>
+#include <media/dvbdev.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include "dvb-bt8xx.h"
+#include "bt878.h"
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define dprintk(fmt, arg...) do {				\
+	if (debug)						\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt),		\
+		       __func__, ##arg);			\
+} while (0)
+
+
+#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+
+static void dvb_bt8xx_task(struct tasklet_struct *t)
+{
+	struct bt878 *bt = from_tasklet(bt, t, tasklet);
+	struct dvb_bt8xx_card *card = dev_get_drvdata(&bt->adapter->dev);
+
+	dprintk("%d\n", card->bt->finished_block);
+
+	while (card->bt->last_block != card->bt->finished_block) {
+		(card->bt->TS_Size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+			(&card->demux,
+			 &card->bt->buf_cpu[card->bt->last_block *
+					    card->bt->block_bytes],
+			 card->bt->block_bytes);
+		card->bt->last_block = (card->bt->last_block + 1) %
+					card->bt->block_count;
+	}
+}
+
+static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux*dvbdmx = dvbdmxfeed->demux;
+	struct dvb_bt8xx_card *card = dvbdmx->priv;
+	int rc;
+
+	dprintk("dvb_bt8xx: start_feed\n");
+
+	if (!dvbdmx->dmx.frontend)
+		return -EINVAL;
+
+	mutex_lock(&card->lock);
+	card->nfeeds++;
+	rc = card->nfeeds;
+	if (card->nfeeds == 1)
+		bt878_start(card->bt, card->gpio_mode,
+			    card->op_sync_orin, card->irq_err_ignore);
+	mutex_unlock(&card->lock);
+	return rc;
+}
+
+static int dvb_bt8xx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct dvb_bt8xx_card *card = dvbdmx->priv;
+
+	dprintk("dvb_bt8xx: stop_feed\n");
+
+	if (!dvbdmx->dmx.frontend)
+		return -EINVAL;
+
+	mutex_lock(&card->lock);
+	card->nfeeds--;
+	if (card->nfeeds == 0)
+		bt878_stop(card->bt);
+	mutex_unlock(&card->lock);
+
+	return 0;
+}
+
+static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev)
+{
+	if ((adev->subsystem_vendor == bdev->subsystem_vendor) &&
+		(adev->subsystem_device == bdev->subsystem_device) &&
+		(adev->bus->number == bdev->bus->number) &&
+		(PCI_SLOT(adev->devfn) == PCI_SLOT(bdev->devfn)))
+		return 1;
+	return 0;
+}
+
+static struct bt878 *dvb_bt8xx_878_match(unsigned int bttv_nr,
+					 struct pci_dev* bttv_pci_dev)
+{
+	unsigned int card_nr;
+
+	/* Hmm, n squared. Hope n is small */
+	for (card_nr = 0; card_nr < bt878_num; card_nr++)
+		if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
+			return &bt878[card_nr];
+	return NULL;
+}
+
+static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
+{
+	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
+	static u8 mt352_reset [] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0x20 };
+	static u8 mt352_gpp_ctl_cfg [] = { 0x8C, 0x33 };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+	mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+	return 0;
+}
+
+static int thomson_dtt7579_tuner_calc_regs(struct dvb_frontend *fe, u8* pllbuf, int buf_len)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 div;
+	unsigned char bs = 0;
+	unsigned char cp = 0;
+
+	if (buf_len < 5)
+		return -EINVAL;
+
+	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+	if (c->frequency < 542000000)
+		cp = 0xb4;
+	else if (c->frequency < 771000000)
+		cp = 0xbc;
+	else
+		cp = 0xf4;
+
+	if (c->frequency == 0)
+		bs = 0x03;
+	else if (c->frequency < 443250000)
+		bs = 0x02;
+	else
+		bs = 0x08;
+
+	pllbuf[0] = 0x60;
+	pllbuf[1] = div >> 8;
+	pllbuf[2] = div & 0xff;
+	pllbuf[3] = cp;
+	pllbuf[4] = bs;
+
+	return 5;
+}
+
+static struct mt352_config thomson_dtt7579_config = {
+	.demod_address = 0x0f,
+	.demod_init = thomson_dtt7579_demod_init,
+};
+
+static struct zl10353_config thomson_dtt7579_zl10353_config = {
+	.demod_address = 0x0f,
+};
+
+static int cx24108_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 freq = c->frequency;
+	int i, a, n, pump;
+	u32 band, pll;
+	u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+		1576000,1718000,1856000,2036000,2150000};
+	u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+		0x00102000,0x00104000,0x00108000,0x00110000,
+		0x00120000,0x00140000};
+
+	#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+	dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq);
+
+	/* This is really the bit driving the tuner chip cx24108 */
+
+	if (freq<950000)
+		freq = 950000; /* kHz */
+	else if (freq>2150000)
+		freq = 2150000; /* satellite IF is 950..2150MHz */
+
+	/* decide which VCO to use for the input frequency */
+	for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++);
+	dprintk("cx24108 debug: select vco #%d (f=%d)\n", i, freq);
+	band=bandsel[i];
+	/* the gain values must be set by SetSymbolrate */
+	/* compute the pll divider needed, from Conexant data sheet,
+	   resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+	   depending on the divider bit. It is set to /4 on the 2 lowest
+	   bands  */
+	n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+	a=n%32; n/=32; if(a==0) n--;
+	pump=(freq<(osci[i-1]+osci[i])/2);
+	pll=0xf8000000|
+	    ((pump?1:2)<<(14+11))|
+	    ((n&0x1ff)<<(5+11))|
+	    ((a&0x1f)<<11);
+	/* everything is shifted left 11 bits to left-align the bits in the
+	   32bit word. Output to the tuner goes MSB-aligned, after all */
+	dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n", pump, n, a);
+	cx24110_pll_write(fe,band);
+	/* set vga and vca to their widest-band settings, as a precaution.
+	   SetSymbolrate might not be called to set this up */
+	cx24110_pll_write(fe,0x500c0000);
+	cx24110_pll_write(fe,0x83f1f800);
+	cx24110_pll_write(fe,pll);
+	//writereg(client,0x56,0x7f);
+
+	return 0;
+}
+
+static int pinnsat_tuner_init(struct dvb_frontend* fe)
+{
+	struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+	bttv_gpio_enable(card->bttv_nr, 1, 1);  /* output */
+	bttv_write_gpio(card->bttv_nr, 1, 1);   /* relay on */
+
+	return 0;
+}
+
+static int pinnsat_tuner_sleep(struct dvb_frontend* fe)
+{
+	struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+	bttv_write_gpio(card->bttv_nr, 1, 0);   /* relay off */
+
+	return 0;
+}
+
+static struct cx24110_config pctvsat_config = {
+	.demod_address = 0x55,
+};
+
+static int microtune_mt7202dtf_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
+	u8 cfg, cpump, band_select;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = (36000000 + c->frequency + 83333) / 166666;
+	cfg = 0x88;
+
+	if (c->frequency < 175000000)
+		cpump = 2;
+	else if (c->frequency < 390000000)
+		cpump = 1;
+	else if (c->frequency < 470000000)
+		cpump = 2;
+	else if (c->frequency < 750000000)
+		cpump = 2;
+	else
+		cpump = 3;
+
+	if (c->frequency < 175000000)
+		band_select = 0x0e;
+	else if (c->frequency < 470000000)
+		band_select = 0x05;
+	else
+		band_select = 0x03;
+
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = ((div >> 10) & 0x60) | cfg;
+	data[3] = (cpump << 6) | band_select;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	i2c_transfer(card->i2c_adapter, &msg, 1);
+	return (div * 166666 - 36000000);
+}
+
+static int microtune_mt7202dtf_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+	struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+	return request_firmware(fw, name, &bt->bt->dev->dev);
+}
+
+static const struct sp887x_config microtune_mt7202dtf_config = {
+	.demod_address = 0x70,
+	.request_firmware = microtune_mt7202dtf_request_firmware,
+};
+
+static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+	static u8 mt352_reset [] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
+	static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+	mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+	udelay(2000);
+	mt352_write(fe, mt352_av771_extra,sizeof(mt352_av771_extra));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+	return 0;
+}
+
+static int advbt771_samsung_tdtc9251dh0_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 div;
+	unsigned char bs = 0;
+	unsigned char cp = 0;
+
+	if (buf_len < 5) return -EINVAL;
+
+	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+	if (c->frequency < 150000000)
+		cp = 0xB4;
+	else if (c->frequency < 173000000)
+		cp = 0xBC;
+	else if (c->frequency < 250000000)
+		cp = 0xB4;
+	else if (c->frequency < 400000000)
+		cp = 0xBC;
+	else if (c->frequency < 420000000)
+		cp = 0xF4;
+	else if (c->frequency < 470000000)
+		cp = 0xFC;
+	else if (c->frequency < 600000000)
+		cp = 0xBC;
+	else if (c->frequency < 730000000)
+		cp = 0xF4;
+	else
+		cp = 0xFC;
+
+	if (c->frequency < 150000000)
+		bs = 0x01;
+	else if (c->frequency < 173000000)
+		bs = 0x01;
+	else if (c->frequency < 250000000)
+		bs = 0x02;
+	else if (c->frequency < 400000000)
+		bs = 0x02;
+	else if (c->frequency < 420000000)
+		bs = 0x02;
+	else if (c->frequency < 470000000)
+		bs = 0x02;
+	else
+		bs = 0x08;
+
+	pllbuf[0] = 0x61;
+	pllbuf[1] = div >> 8;
+	pllbuf[2] = div & 0xff;
+	pllbuf[3] = cp;
+	pllbuf[4] = bs;
+
+	return 5;
+}
+
+static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
+	.demod_address = 0x0f,
+	.demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
+};
+
+static const struct dst_config dst_config = {
+	.demod_address = 0x55,
+};
+
+static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+	struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+	return request_firmware(fw, name, &bt->bt->dev->dev);
+}
+
+static void or51211_setmode(struct dvb_frontend * fe, int mode)
+{
+	struct dvb_bt8xx_card *bt = fe->dvb->priv;
+	bttv_write_gpio(bt->bttv_nr, 0x0002, mode);   /* Reset */
+	msleep(20);
+}
+
+static void or51211_reset(struct dvb_frontend * fe)
+{
+	struct dvb_bt8xx_card *bt = fe->dvb->priv;
+
+	/* RESET DEVICE
+	 * reset is controlled by GPIO-0
+	 * when set to 0 causes reset and when to 1 for normal op
+	 * must remain reset for 128 clock cycles on a 50Mhz clock
+	 * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4
+	 * We assume that the reset has be held low long enough or we
+	 * have been reset by a power on.  When the driver is unloaded
+	 * reset set to 0 so if reloaded we have been reset.
+	 */
+	/* reset & PRM1,2&4 are outputs */
+	int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
+	if (ret != 0)
+		pr_warn("or51211: Init Error - Can't Reset DVR (%i)\n", ret);
+	bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000);   /* Reset */
+	msleep(20);
+	/* Now set for normal operation */
+	bttv_write_gpio(bt->bttv_nr, 0x0001F, 0x0001);
+	/* wait for operation to begin */
+	msleep(500);
+}
+
+static void or51211_sleep(struct dvb_frontend * fe)
+{
+	struct dvb_bt8xx_card *bt = fe->dvb->priv;
+	bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000);
+}
+
+static const struct or51211_config or51211_config = {
+	.demod_address = 0x15,
+	.request_firmware = or51211_request_firmware,
+	.setmode = or51211_setmode,
+	.reset = or51211_reset,
+	.sleep = or51211_sleep,
+};
+
+static int vp3021_alps_tded4_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf) };
+
+	div = (c->frequency + 36166667) / 166667;
+
+	buf[0] = (div >> 8) & 0x7F;
+	buf[1] = div & 0xFF;
+	buf[2] = 0x85;
+	if ((c->frequency >= 47000000) && (c->frequency < 153000000))
+		buf[3] = 0x01;
+	else if ((c->frequency >= 153000000) && (c->frequency < 430000000))
+		buf[3] = 0x02;
+	else if ((c->frequency >= 430000000) && (c->frequency < 824000000))
+		buf[3] = 0x0C;
+	else if ((c->frequency >= 824000000) && (c->frequency < 863000000))
+		buf[3] = 0x8C;
+	else
+		return -EINVAL;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	i2c_transfer(card->i2c_adapter, &msg, 1);
+	return 0;
+}
+
+static struct nxt6000_config vp3021_alps_tded4_config = {
+	.demod_address = 0x0a,
+	.clock_inversion = 1,
+};
+
+static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
+{
+	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+	static u8 mt352_reset [] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+	mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+	return 0;
+}
+
+static int digitv_alps_tded4_tuner_calc_regs(struct dvb_frontend *fe,  u8 *pllbuf, int buf_len)
+{
+	u32 div;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+	if (buf_len < 5)
+		return -EINVAL;
+
+	div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+	pllbuf[0] = 0x61;
+	pllbuf[1] = (div >> 8) & 0x7F;
+	pllbuf[2] = div & 0xFF;
+	pllbuf[3] = 0x85;
+
+	dprintk("frequency %u, div %u\n", c->frequency, div);
+
+	if (c->frequency < 470000000)
+		pllbuf[4] = 0x02;
+	else if (c->frequency > 823000000)
+		pllbuf[4] = 0x88;
+	else
+		pllbuf[4] = 0x08;
+
+	if (c->bandwidth_hz == 8000000)
+		pllbuf[4] |= 0x04;
+
+	return 5;
+}
+
+static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
+{
+	/*
+	 * Reset the frontend, must be called before trying
+	 * to initialise the MT352 or mt352_attach
+	 * will fail. Same goes for the nxt6000 frontend.
+	 *
+	 */
+
+	int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
+	if (ret != 0)
+		pr_warn("digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n",
+			ret);
+
+	/* Pulse the reset line */
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low  */
+	msleep(100);
+
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+}
+
+static struct mt352_config digitv_alps_tded4_config = {
+	.demod_address = 0x0a,
+	.demod_init = digitv_alps_tded4_demod_init,
+};
+
+static struct lgdt330x_config tdvs_tua6034_config = {
+	.demod_chip       = LGDT3303,
+	.serial_mpeg      = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+};
+
+static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
+{
+	/* Set pin 27 of the lgdt3303 chip high to reset the frontend */
+
+	/* Pulse the reset line */
+	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low  */
+	msleep(100);
+
+	bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+	msleep(100);
+}
+
+static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
+{
+	struct dst_state* state = NULL;
+
+	switch(type) {
+	case BTTV_BOARD_DVICO_DVBT_LITE:
+		card->fe = dvb_attach(mt352_attach, &thomson_dtt7579_config, card->i2c_adapter);
+
+		if (card->fe == NULL)
+			card->fe = dvb_attach(zl10353_attach, &thomson_dtt7579_zl10353_config,
+						  card->i2c_adapter);
+
+		if (card->fe != NULL) {
+			card->fe->ops.tuner_ops.calc_regs = thomson_dtt7579_tuner_calc_regs;
+			card->fe->ops.info.frequency_min_hz = 174 * MHz;
+			card->fe->ops.info.frequency_max_hz = 862 * MHz;
+		}
+		break;
+
+	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+		lgdt330x_reset(card);
+		card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config,
+				      0x0e, card->i2c_adapter);
+		if (card->fe != NULL) {
+			dvb_attach(simple_tuner_attach, card->fe,
+				   card->i2c_adapter, 0x61,
+				   TUNER_LG_TDVS_H06XF);
+			dprintk("dvb_bt8xx: lgdt330x detected\n");
+		}
+		break;
+
+	case BTTV_BOARD_NEBULA_DIGITV:
+		/*
+		 * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
+		 * this would be a cleaner solution than trying each frontend in turn.
+		 */
+
+		/* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
+		digitv_alps_tded4_reset(card);
+		card->fe = dvb_attach(nxt6000_attach, &vp3021_alps_tded4_config, card->i2c_adapter);
+		if (card->fe != NULL) {
+			card->fe->ops.tuner_ops.set_params = vp3021_alps_tded4_tuner_set_params;
+			dprintk("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
+			break;
+		}
+
+		/* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
+		digitv_alps_tded4_reset(card);
+		card->fe = dvb_attach(mt352_attach, &digitv_alps_tded4_config, card->i2c_adapter);
+
+		if (card->fe != NULL) {
+			card->fe->ops.tuner_ops.calc_regs = digitv_alps_tded4_tuner_calc_regs;
+			dprintk("dvb_bt8xx: an mt352 was detected on your digitv card\n");
+		}
+		break;
+
+	case BTTV_BOARD_AVDVBT_761:
+		card->fe = dvb_attach(sp887x_attach, &microtune_mt7202dtf_config, card->i2c_adapter);
+		if (card->fe) {
+			card->fe->ops.tuner_ops.set_params = microtune_mt7202dtf_tuner_set_params;
+		}
+		break;
+
+	case BTTV_BOARD_AVDVBT_771:
+		card->fe = dvb_attach(mt352_attach, &advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
+		if (card->fe != NULL) {
+			card->fe->ops.tuner_ops.calc_regs = advbt771_samsung_tdtc9251dh0_tuner_calc_regs;
+			card->fe->ops.info.frequency_min_hz = 174 * MHz;
+			card->fe->ops.info.frequency_max_hz = 862 * MHz;
+		}
+		break;
+
+	case BTTV_BOARD_TWINHAN_DST:
+		/*	DST is not a frontend driver !!!		*/
+		state = kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+		if (!state) {
+			pr_err("No memory\n");
+			break;
+		}
+		/*	Setup the Card					*/
+		state->config = &dst_config;
+		state->i2c = card->i2c_adapter;
+		state->bt = card->bt;
+		state->dst_ca = NULL;
+		/*	DST is not a frontend, attaching the ASIC	*/
+		if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) {
+			pr_err("%s: Could not find a Twinhan DST\n", __func__);
+			kfree(state);
+			break;
+		}
+		/*	Attach other DST peripherals if any		*/
+		/*	Conditional Access device			*/
+		card->fe = &state->frontend;
+		if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+			dvb_attach(dst_ca_attach, state, &card->dvb_adapter);
+		break;
+
+	case BTTV_BOARD_PINNACLESAT:
+		card->fe = dvb_attach(cx24110_attach, &pctvsat_config, card->i2c_adapter);
+		if (card->fe) {
+			card->fe->ops.tuner_ops.init = pinnsat_tuner_init;
+			card->fe->ops.tuner_ops.sleep = pinnsat_tuner_sleep;
+			card->fe->ops.tuner_ops.set_params = cx24108_tuner_set_params;
+		}
+		break;
+
+	case BTTV_BOARD_PC_HDTV:
+		card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter);
+		if (card->fe != NULL)
+			dvb_attach(simple_tuner_attach, card->fe,
+				   card->i2c_adapter, 0x61,
+				   TUNER_PHILIPS_FCV1236D);
+		break;
+	}
+
+	if (card->fe == NULL)
+		pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+		       card->bt->dev->vendor,
+		       card->bt->dev->device,
+		       card->bt->dev->subsystem_vendor,
+		       card->bt->dev->subsystem_device);
+	else
+		if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
+			pr_err("Frontend registration failed!\n");
+			dvb_frontend_detach(card->fe);
+			card->fe = NULL;
+		}
+}
+
+static int dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+{
+	int result;
+
+	result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
+				      THIS_MODULE, &card->bt->dev->dev,
+				      adapter_nr);
+	if (result < 0) {
+		pr_err("dvb_register_adapter failed (errno = %d)\n", result);
+		return result;
+	}
+	card->dvb_adapter.priv = card;
+
+	card->bt->adapter = card->i2c_adapter;
+
+	memset(&card->demux, 0, sizeof(struct dvb_demux));
+
+	card->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING;
+
+	card->demux.priv = card;
+	card->demux.filternum = 256;
+	card->demux.feednum = 256;
+	card->demux.start_feed = dvb_bt8xx_start_feed;
+	card->demux.stop_feed = dvb_bt8xx_stop_feed;
+	card->demux.write_to_decoder = NULL;
+
+	result = dvb_dmx_init(&card->demux);
+	if (result < 0) {
+		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+		goto err_unregister_adaptor;
+	}
+
+	card->dmxdev.filternum = 256;
+	card->dmxdev.demux = &card->demux.dmx;
+	card->dmxdev.capabilities = 0;
+
+	result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter);
+	if (result < 0) {
+		pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
+		goto err_dmx_release;
+	}
+
+	card->fe_hw.source = DMX_FRONTEND_0;
+
+	result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_hw);
+	if (result < 0) {
+		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+		goto err_dmxdev_release;
+	}
+
+	card->fe_mem.source = DMX_MEMORY_FE;
+
+	result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_mem);
+	if (result < 0) {
+		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+		goto err_remove_hw_frontend;
+	}
+
+	result = card->demux.dmx.connect_frontend(&card->demux.dmx, &card->fe_hw);
+	if (result < 0) {
+		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+		goto err_remove_mem_frontend;
+	}
+
+	result = dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
+	if (result < 0) {
+		pr_err("dvb_net_init failed (errno = %d)\n", result);
+		goto err_disconnect_frontend;
+	}
+
+	tasklet_setup(&card->bt->tasklet, dvb_bt8xx_task);
+
+	frontend_init(card, type);
+
+	return 0;
+
+err_disconnect_frontend:
+	card->demux.dmx.disconnect_frontend(&card->demux.dmx);
+err_remove_mem_frontend:
+	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
+err_remove_hw_frontend:
+	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
+err_dmxdev_release:
+	dvb_dmxdev_release(&card->dmxdev);
+err_dmx_release:
+	dvb_dmx_release(&card->demux);
+err_unregister_adaptor:
+	dvb_unregister_adapter(&card->dvb_adapter);
+	return result;
+}
+
+static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+{
+	struct dvb_bt8xx_card *card;
+	struct pci_dev* bttv_pci_dev;
+	int ret;
+
+	if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
+		return -ENOMEM;
+
+	mutex_init(&card->lock);
+	card->bttv_nr = sub->core->nr;
+	strscpy(card->card_name, sub->core->v4l2_dev.name,
+		sizeof(card->card_name));
+	card->i2c_adapter = &sub->core->i2c_adap;
+
+	switch(sub->core->type) {
+	case BTTV_BOARD_PINNACLESAT:
+		card->gpio_mode = 0x0400c060;
+		/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
+			      BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		break;
+
+	case BTTV_BOARD_DVICO_DVBT_LITE:
+		card->gpio_mode = 0x0400C060;
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		/* 26, 15, 14, 6, 5
+		 * A_PWRDN  DA_DPM DA_SBR DA_IOM_DA
+		 * DA_APP(parallel) */
+		break;
+
+	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+		card->gpio_mode = 0x0400c060;
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		break;
+
+	case BTTV_BOARD_NEBULA_DIGITV:
+	case BTTV_BOARD_AVDVBT_761:
+		card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		/* A_PWRDN DA_SBR DA_APP (high speed serial) */
+		break;
+
+	case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
+		card->gpio_mode = 0x0400402B;
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		/* A_PWRDN DA_SBR  DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
+		break;
+
+	case BTTV_BOARD_TWINHAN_DST:
+		card->gpio_mode = 0x2204f2c;
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
+				       BT878_APPERR | BT878_AFBUS;
+		/* 25,21,14,11,10,9,8,3,2 then
+		 * 0x33 = 5,4,1,0
+		 * A_SEL=SML, DA_MLB, DA_SBR,
+		 * DA_SDR=f, fifo trigger = 32 DWORDS
+		 * IOM = 0 == audio A/D
+		 * DPM = 0 == digital audio mode
+		 * == async data parallel port
+		 * then 0x33 (13 is set by start_capture)
+		 * DA_APP = async data parallel port,
+		 * ACAP_EN = 1,
+		 * RISC+FIFO ENABLE */
+		break;
+
+	case BTTV_BOARD_PC_HDTV:
+		card->gpio_mode = 0x0100EC7B;
+		card->op_sync_orin = BT878_RISC_SYNC_MASK;
+		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+		break;
+
+	default:
+		pr_err("Unknown bttv card type: %d\n", sub->core->type);
+		kfree(card);
+		return -ENODEV;
+	}
+
+	dprintk("dvb_bt8xx: identified card%d as %s\n", card->bttv_nr, card->card_name);
+
+	if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) {
+		pr_err("no pci device for card %d\n", card->bttv_nr);
+		kfree(card);
+		return -ENODEV;
+	}
+
+	if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
+		pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr);
+		pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n");
+
+		kfree(card);
+		return -ENODEV;
+	}
+
+	mutex_init(&card->bt->gpio_lock);
+	card->bt->bttv_nr = sub->core->nr;
+
+	if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) {
+		kfree(card);
+		return ret;
+	}
+
+	dev_set_drvdata(&sub->dev, card);
+	return 0;
+}
+
+static void dvb_bt8xx_remove(struct bttv_sub_device *sub)
+{
+	struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev);
+
+	dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr);
+
+	bt878_stop(card->bt);
+	tasklet_kill(&card->bt->tasklet);
+	dvb_net_release(&card->dvbnet);
+	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
+	card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
+	dvb_dmxdev_release(&card->dmxdev);
+	dvb_dmx_release(&card->demux);
+	if (card->fe) {
+		dvb_unregister_frontend(card->fe);
+		dvb_frontend_detach(card->fe);
+	}
+	dvb_unregister_adapter(&card->dvb_adapter);
+
+	kfree(card);
+}
+
+static struct bttv_sub_driver driver = {
+	.drv = {
+		.name		= "dvb-bt8xx",
+	},
+	.probe		= dvb_bt8xx_probe,
+	.remove		= dvb_bt8xx_remove,
+	/* FIXME:
+	 * .shutdown	= dvb_bt8xx_shutdown,
+	 * .suspend	= dvb_bt8xx_suspend,
+	 * .resume	= dvb_bt8xx_resume,
+	 */
+};
+
+static int __init dvb_bt8xx_init(void)
+{
+	return bttv_sub_register(&driver, "dvb");
+}
+
+static void __exit dvb_bt8xx_exit(void)
+{
+	bttv_sub_unregister(&driver);
+}
+
+module_init(dvb_bt8xx_init);
+module_exit(dvb_bt8xx_exit);
+
+MODULE_DESCRIPTION("Bt8xx based DVB adapter driver");
+MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
+MODULE_LICENSE("GPL");