Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

33 files changed, 16724 insertions, 0 deletions

diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
new file mode 100644
index 0000000000..926da88192
--- /dev/null
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_CX23885
+	tristate "Conexant cx23885 (2388x successor) support"
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND
+	select SND_PCM
+	select I2C_ALGOBIT
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	depends on RC_CORE
+	select VIDEOBUF2_DVB
+	select VIDEOBUF2_DMA_SG
+	select VIDEO_CX25840
+	select VIDEO_CX2341X
+	select VIDEO_CS3308
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This is a video4linux driver for Conexant 23885 based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx23885
+
+config MEDIA_ALTERA_CI
+	tristate "Altera FPGA based CI module"
+	depends on VIDEO_CX23885 && DVB_CORE
+	select ALTERA_STAPL
+	help
+	  An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called altera-ci
diff --git a/drivers/media/pci/cx23885/Makefile b/drivers/media/pci/cx23885/Makefile
new file mode 100644
index 0000000000..a785169ec3
--- /dev/null
+++ b/drivers/media/pci/cx23885/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+cx23885-objs	:= cx23885-cards.o cx23885-video.o cx23885-vbi.o \
+		    cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
+		    cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
+		    cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
+		    cx23885-f300.o cx23885-alsa.o
+
+obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
+obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o
+
+ccflags-y += -I $(srctree)/drivers/media/tuners
+ccflags-y += -I $(srctree)/drivers/media/dvb-frontends
+
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/pci/cx23885/altera-ci.c b/drivers/media/pci/cx23885/altera-ci.c
new file mode 100644
index 0000000000..0dc348215b
--- /dev/null
+++ b/drivers/media/pci/cx23885/altera-ci.c
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * altera-ci.c
+ *
+ *  CI driver in conjunction with NetUp Dual DVB-T/C RF CI card
+ *
+ * Copyright (C) 2010,2011 NetUP Inc.
+ * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
+ */
+
+/*
+ * currently cx23885 GPIO's used.
+ * GPIO-0 ~INT in
+ * GPIO-1 TMS out
+ * GPIO-2 ~reset chips out
+ * GPIO-3 to GPIO-10 data/addr for CA in/out
+ * GPIO-11 ~CS out
+ * GPIO-12 AD_RG out
+ * GPIO-13 ~WR out
+ * GPIO-14 ~RD out
+ * GPIO-15 ~RDY in
+ * GPIO-16 TCK out
+ * GPIO-17 TDO in
+ * GPIO-18 TDI out
+ */
+/*
+ *  Bit definitions for MC417_RWD and MC417_OEN registers
+ * bits 31-16
+ * +-----------+
+ * | Reserved  |
+ * +-----------+
+ *   bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ * |  TDI  |  TDO  |  TCK  |  RDY# |  #RD  |  #WR  | AD_RG |  #CS  |
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ * |  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include "altera-ci.h"
+#include <media/dvb_ca_en50221.h>
+
+/* FPGA regs */
+#define NETUP_CI_INT_CTRL	0x00
+#define NETUP_CI_BUSCTRL2	0x01
+#define NETUP_CI_ADDR0		0x04
+#define NETUP_CI_ADDR1		0x05
+#define NETUP_CI_DATA		0x06
+#define NETUP_CI_BUSCTRL	0x07
+#define NETUP_CI_PID_ADDR0	0x08
+#define NETUP_CI_PID_ADDR1	0x09
+#define NETUP_CI_PID_DATA	0x0a
+#define NETUP_CI_TSA_DIV	0x0c
+#define NETUP_CI_TSB_DIV	0x0d
+#define NETUP_CI_REVISION	0x0f
+
+/* const for ci op */
+#define NETUP_CI_FLG_CTL	1
+#define NETUP_CI_FLG_RD		1
+#define NETUP_CI_FLG_AD		1
+
+static unsigned int ci_dbg;
+module_param(ci_dbg, int, 0644);
+MODULE_PARM_DESC(ci_dbg, "Enable CI debugging");
+
+static unsigned int pid_dbg;
+module_param(pid_dbg, int, 0644);
+MODULE_PARM_DESC(pid_dbg, "Enable PID filtering debugging");
+
+MODULE_DESCRIPTION("altera FPGA CI module");
+MODULE_AUTHOR("Igor M. Liplianin  <liplianin@netup.ru>");
+MODULE_LICENSE("GPL");
+
+#define ci_dbg_print(fmt, args...) \
+	do { \
+		if (ci_dbg) \
+			printk(KERN_DEBUG pr_fmt("%s: " fmt), \
+			       __func__, ##args); \
+	} while (0)
+
+#define pid_dbg_print(fmt, args...) \
+	do { \
+		if (pid_dbg) \
+			printk(KERN_DEBUG pr_fmt("%s: " fmt), \
+			       __func__, ##args); \
+	} while (0)
+
+struct altera_ci_state;
+struct netup_hw_pid_filter;
+
+struct fpga_internal {
+	void *dev;
+	struct mutex fpga_mutex;/* two CI's on the same fpga */
+	struct netup_hw_pid_filter *pid_filt[2];
+	struct altera_ci_state *state[2];
+	struct work_struct work;
+	int (*fpga_rw) (void *dev, int flag, int data, int rw);
+	int cis_used;
+	int filts_used;
+	int strt_wrk;
+};
+
+/* stores all private variables for communication with CI */
+struct altera_ci_state {
+	struct fpga_internal *internal;
+	struct dvb_ca_en50221 ca;
+	int status;
+	int nr;
+};
+
+/* stores all private variables for hardware pid filtering */
+struct netup_hw_pid_filter {
+	struct fpga_internal *internal;
+	struct dvb_demux *demux;
+	/* save old functions */
+	int (*start_feed)(struct dvb_demux_feed *feed);
+	int (*stop_feed)(struct dvb_demux_feed *feed);
+
+	int status;
+	int nr;
+};
+
+/* internal params node */
+struct fpga_inode {
+	/* pointer for internal params, one for each pair of CI's */
+	struct fpga_internal		*internal;
+	struct fpga_inode		*next_inode;
+};
+
+/* first internal params */
+static struct fpga_inode *fpga_first_inode;
+
+/* find chip by dev */
+static struct fpga_inode *find_inode(void *dev)
+{
+	struct fpga_inode *temp_chip = fpga_first_inode;
+
+	if (temp_chip == NULL)
+		return temp_chip;
+
+	/*
+	 Search for the last fpga CI chip or
+	 find it by dev */
+	while ((temp_chip != NULL) &&
+				(temp_chip->internal->dev != dev))
+		temp_chip = temp_chip->next_inode;
+
+	return temp_chip;
+}
+/* check demux */
+static struct fpga_internal *check_filter(struct fpga_internal *temp_int,
+						void *demux_dev, int filt_nr)
+{
+	if (temp_int == NULL)
+		return NULL;
+
+	if ((temp_int->pid_filt[filt_nr]) == NULL)
+		return NULL;
+
+	if (temp_int->pid_filt[filt_nr]->demux == demux_dev)
+		return temp_int;
+
+	return NULL;
+}
+
+/* find chip by demux */
+static struct fpga_inode *find_dinode(void *demux_dev)
+{
+	struct fpga_inode *temp_chip = fpga_first_inode;
+	struct fpga_internal *temp_int;
+
+	/*
+	 * Search of the last fpga CI chip or
+	 * find it by demux
+	 */
+	while (temp_chip != NULL) {
+		if (temp_chip->internal != NULL) {
+			temp_int = temp_chip->internal;
+			if (check_filter(temp_int, demux_dev, 0))
+				break;
+			if (check_filter(temp_int, demux_dev, 1))
+				break;
+		}
+
+		temp_chip = temp_chip->next_inode;
+	}
+
+	return temp_chip;
+}
+
+/* deallocating chip */
+static void remove_inode(struct fpga_internal *internal)
+{
+	struct fpga_inode *prev_node = fpga_first_inode;
+	struct fpga_inode *del_node = find_inode(internal->dev);
+
+	if (del_node != NULL) {
+		if (del_node == fpga_first_inode) {
+			fpga_first_inode = del_node->next_inode;
+		} else {
+			while (prev_node->next_inode != del_node)
+				prev_node = prev_node->next_inode;
+
+			if (del_node->next_inode == NULL)
+				prev_node->next_inode = NULL;
+			else
+				prev_node->next_inode =
+					prev_node->next_inode->next_inode;
+		}
+
+		kfree(del_node);
+	}
+}
+
+/* allocating new chip */
+static struct fpga_inode *append_internal(struct fpga_internal *internal)
+{
+	struct fpga_inode *new_node = fpga_first_inode;
+
+	if (new_node == NULL) {
+		new_node = kmalloc(sizeof(struct fpga_inode), GFP_KERNEL);
+		fpga_first_inode = new_node;
+	} else {
+		while (new_node->next_inode != NULL)
+			new_node = new_node->next_inode;
+
+		new_node->next_inode =
+				kmalloc(sizeof(struct fpga_inode), GFP_KERNEL);
+		if (new_node->next_inode != NULL)
+			new_node = new_node->next_inode;
+		else
+			new_node = NULL;
+	}
+
+	if (new_node != NULL) {
+		new_node->internal = internal;
+		new_node->next_inode = NULL;
+	}
+
+	return new_node;
+}
+
+static int netup_fpga_op_rw(struct fpga_internal *inter, int addr,
+							u8 val, u8 read)
+{
+	inter->fpga_rw(inter->dev, NETUP_CI_FLG_AD, addr, 0);
+	return inter->fpga_rw(inter->dev, 0, val, read);
+}
+
+/* flag - mem/io, read - read/write */
+static int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
+				u8 flag, u8 read, int addr, u8 val)
+{
+
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+
+	u8 store;
+	int mem = 0;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	netup_fpga_op_rw(inter, NETUP_CI_ADDR0, ((addr << 1) & 0xfe), 0);
+	netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0);
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+
+	store &= 0x0f;
+	store |= ((state->nr << 7) | (flag << 6));
+
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0);
+	mem = netup_fpga_op_rw(inter, NETUP_CI_DATA, val, read);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__,
+			(read) ? "read" : "write", addr,
+			(flag == NETUP_CI_FLG_CTL) ? "ctl" : "mem",
+			(read) ? mem : val);
+
+	return mem;
+}
+
+static int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+					int slot, int addr)
+{
+	return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0);
+}
+
+static int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+					 int slot, int addr, u8 data)
+{
+	return altera_ci_op_cam(en50221, slot, 0, 0, addr, data);
+}
+
+static int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221,
+				  int slot, u8 addr)
+{
+	return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL,
+						NETUP_CI_FLG_RD, addr, 0);
+}
+
+static int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
+				   u8 addr, u8 data)
+{
+	return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data);
+}
+
+static int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+	/* reasonable timeout for CI reset is 10 seconds */
+	unsigned long t_out = jiffies + msecs_to_jiffies(9999);
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+				(ret & 0xcf) | (1 << (5 - state->nr)), 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	for (;;) {
+		msleep(50);
+
+		mutex_lock(&inter->fpga_mutex);
+
+		ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+						0, NETUP_CI_FLG_RD);
+		mutex_unlock(&inter->fpga_mutex);
+
+		if ((ret & (1 << (5 - state->nr))) == 0)
+			break;
+		if (time_after(jiffies, t_out))
+			break;
+	}
+
+
+	ci_dbg_print("%s: %d msecs\n", __func__,
+		jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out));
+
+	return 0;
+}
+
+static int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	/* not implemented */
+	return 0;
+}
+
+static int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+				(ret & 0x0f) | (1 << (3 - state->nr)), 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	return 0;
+}
+
+/* work handler */
+static void netup_read_ci_status(struct work_struct *work)
+{
+	struct fpga_internal *inter =
+			container_of(work, struct fpga_internal, work);
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	mutex_lock(&inter->fpga_mutex);
+	/* ack' irq */
+	ret = netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0, NETUP_CI_FLG_RD);
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	if (inter->state[1] != NULL) {
+		inter->state[1]->status =
+				((ret & 1) == 0 ?
+				DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY : 0);
+		ci_dbg_print("%s: setting CI[1] status = 0x%x\n",
+				__func__, inter->state[1]->status);
+	}
+
+	if (inter->state[0] != NULL) {
+		inter->state[0]->status =
+				((ret & 2) == 0 ?
+				DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY : 0);
+		ci_dbg_print("%s: setting CI[0] status = 0x%x\n",
+				__func__, inter->state[0]->status);
+	}
+}
+
+/* CI irq handler */
+int altera_ci_irq(void *dev)
+{
+	struct fpga_inode *temp_int = NULL;
+	struct fpga_internal *inter = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (dev != NULL) {
+		temp_int = find_inode(dev);
+		if (temp_int != NULL) {
+			inter = temp_int->internal;
+			schedule_work(&inter->work);
+		}
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(altera_ci_irq);
+
+static int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+				      int slot, int open)
+{
+	struct altera_ci_state *state = en50221->data;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	return state->status;
+}
+
+static void altera_hw_filt_release(void *main_dev, int filt_nr)
+{
+	struct fpga_inode *temp_int = find_inode(main_dev);
+	struct netup_hw_pid_filter *pid_filt = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int != NULL) {
+		pid_filt = temp_int->internal->pid_filt[filt_nr - 1];
+		/* stored old feed controls */
+		pid_filt->demux->start_feed = pid_filt->start_feed;
+		pid_filt->demux->stop_feed = pid_filt->stop_feed;
+
+		if (((--(temp_int->internal->filts_used)) <= 0) &&
+			 ((temp_int->internal->cis_used) <= 0)) {
+
+			ci_dbg_print("%s: Actually removing\n", __func__);
+
+			remove_inode(temp_int->internal);
+			kfree(pid_filt->internal);
+		}
+
+		kfree(pid_filt);
+
+	}
+
+}
+
+void altera_ci_release(void *dev, int ci_nr)
+{
+	struct fpga_inode *temp_int = find_inode(dev);
+	struct altera_ci_state *state = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int != NULL) {
+		state = temp_int->internal->state[ci_nr - 1];
+		altera_hw_filt_release(dev, ci_nr);
+
+
+		if (((temp_int->internal->filts_used) <= 0) &&
+				((--(temp_int->internal->cis_used)) <= 0)) {
+
+			ci_dbg_print("%s: Actually removing\n", __func__);
+
+			remove_inode(temp_int->internal);
+			kfree(state->internal);
+		}
+
+		if (state != NULL) {
+			if (state->ca.data != NULL)
+				dvb_ca_en50221_release(&state->ca);
+
+			kfree(state);
+		}
+	}
+
+}
+EXPORT_SYMBOL(altera_ci_release);
+
+static void altera_pid_control(struct netup_hw_pid_filter *pid_filt,
+		u16 pid, int onoff)
+{
+	struct fpga_internal *inter = pid_filt->internal;
+	u8 store = 0;
+
+	/* pid 0-0x1f always enabled, don't touch them */
+	if ((pid == 0x2000) || (pid < 0x20))
+		return;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, (pid >> 3) & 0xff, 0);
+	netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1,
+			((pid >> 11) & 0x03) | (pid_filt->nr << 2), 0);
+
+	store = netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, 0, NETUP_CI_FLG_RD);
+
+	if (onoff)/* 0 - on, 1 - off */
+		store |= (1 << (pid & 7));
+	else
+		store &= ~(1 << (pid & 7));
+
+	netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, store, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	pid_dbg_print("%s: (%d) set pid: %5d 0x%04x '%s'\n", __func__,
+		pid_filt->nr, pid, pid, onoff ? "off" : "on");
+}
+
+static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt,
+					int filt_nr, int onoff)
+{
+	struct fpga_internal *inter = pid_filt->internal;
+	u8 store = 0;
+	int i;
+
+	pid_dbg_print("%s: pid_filt->nr[%d]  now %s\n", __func__, pid_filt->nr,
+			onoff ? "off" : "on");
+
+	if (onoff)/* 0 - on, 1 - off */
+		store = 0xff;/* ignore pid */
+	else
+		store = 0;/* enable pid */
+
+	mutex_lock(&inter->fpga_mutex);
+
+	for (i = 0; i < 1024; i++) {
+		netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, i & 0xff, 0);
+
+		netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1,
+				((i >> 8) & 0x03) | (pid_filt->nr << 2), 0);
+		/* pid 0-0x1f always enabled */
+		netup_fpga_op_rw(inter, NETUP_CI_PID_DATA,
+				(i > 3 ? store : 0), 0);
+	}
+
+	mutex_unlock(&inter->fpga_mutex);
+}
+
+static int altera_pid_feed_control(void *demux_dev, int filt_nr,
+		struct dvb_demux_feed *feed, int onoff)
+{
+	struct fpga_inode *temp_int = find_dinode(demux_dev);
+	struct fpga_internal *inter = temp_int->internal;
+	struct netup_hw_pid_filter *pid_filt = inter->pid_filt[filt_nr - 1];
+
+	altera_pid_control(pid_filt, feed->pid, onoff ? 0 : 1);
+	/* call old feed proc's */
+	if (onoff)
+		pid_filt->start_feed(feed);
+	else
+		pid_filt->stop_feed(feed);
+
+	if (feed->pid == 0x2000)
+		altera_toggle_fullts_streaming(pid_filt, filt_nr,
+						onoff ? 0 : 1);
+
+	return 0;
+}
+
+static int altera_ci_start_feed(struct dvb_demux_feed *feed, int num)
+{
+	altera_pid_feed_control(feed->demux, num, feed, 1);
+
+	return 0;
+}
+
+static int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num)
+{
+	altera_pid_feed_control(feed->demux, num, feed, 0);
+
+	return 0;
+}
+
+static int altera_ci_start_feed_1(struct dvb_demux_feed *feed)
+{
+	return altera_ci_start_feed(feed, 1);
+}
+
+static int altera_ci_stop_feed_1(struct dvb_demux_feed *feed)
+{
+	return altera_ci_stop_feed(feed, 1);
+}
+
+static int altera_ci_start_feed_2(struct dvb_demux_feed *feed)
+{
+	return altera_ci_start_feed(feed, 2);
+}
+
+static int altera_ci_stop_feed_2(struct dvb_demux_feed *feed)
+{
+	return altera_ci_stop_feed(feed, 2);
+}
+
+static int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr)
+{
+	struct netup_hw_pid_filter *pid_filt = NULL;
+	struct fpga_inode *temp_int = find_inode(config->dev);
+	struct fpga_internal *inter = NULL;
+	int ret = 0;
+
+	pid_filt = kzalloc(sizeof(struct netup_hw_pid_filter), GFP_KERNEL);
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (!pid_filt) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (temp_int != NULL) {
+		inter = temp_int->internal;
+		(inter->filts_used)++;
+		ci_dbg_print("%s: Find Internal Structure!\n", __func__);
+	} else {
+		inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL);
+		if (!inter) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		temp_int = append_internal(inter);
+		if (!temp_int) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		inter->filts_used = 1;
+		inter->dev = config->dev;
+		inter->fpga_rw = config->fpga_rw;
+		mutex_init(&inter->fpga_mutex);
+		inter->strt_wrk = 1;
+		ci_dbg_print("%s: Create New Internal Structure!\n", __func__);
+	}
+
+	ci_dbg_print("%s: setting hw pid filter = %p for ci = %d\n", __func__,
+						pid_filt, hw_filt_nr - 1);
+	inter->pid_filt[hw_filt_nr - 1] = pid_filt;
+	pid_filt->demux = config->demux;
+	pid_filt->internal = inter;
+	pid_filt->nr = hw_filt_nr - 1;
+	/* store old feed controls */
+	pid_filt->start_feed = config->demux->start_feed;
+	pid_filt->stop_feed = config->demux->stop_feed;
+	/* replace with new feed controls */
+	if (hw_filt_nr == 1) {
+		pid_filt->demux->start_feed = altera_ci_start_feed_1;
+		pid_filt->demux->stop_feed = altera_ci_stop_feed_1;
+	} else if (hw_filt_nr == 2) {
+		pid_filt->demux->start_feed = altera_ci_start_feed_2;
+		pid_filt->demux->stop_feed = altera_ci_stop_feed_2;
+	}
+
+	altera_toggle_fullts_streaming(pid_filt, 0, 1);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Can't init hardware filter: Error %d\n",
+		     __func__, ret);
+
+	kfree(pid_filt);
+	kfree(inter);
+
+	return ret;
+}
+
+int altera_ci_init(struct altera_ci_config *config, int ci_nr)
+{
+	struct altera_ci_state *state;
+	struct fpga_inode *temp_int = find_inode(config->dev);
+	struct fpga_internal *inter = NULL;
+	int ret = 0;
+	u8 store = 0;
+
+	state = kzalloc(sizeof(struct altera_ci_state), GFP_KERNEL);
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (!state) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (temp_int != NULL) {
+		inter = temp_int->internal;
+		(inter->cis_used)++;
+		inter->fpga_rw = config->fpga_rw;
+		ci_dbg_print("%s: Find Internal Structure!\n", __func__);
+	} else {
+		inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL);
+		if (!inter) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		temp_int = append_internal(inter);
+		if (!temp_int) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		inter->cis_used = 1;
+		inter->dev = config->dev;
+		inter->fpga_rw = config->fpga_rw;
+		mutex_init(&inter->fpga_mutex);
+		inter->strt_wrk = 1;
+		ci_dbg_print("%s: Create New Internal Structure!\n", __func__);
+	}
+
+	ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__,
+						state, ci_nr - 1);
+	state->internal = inter;
+	state->nr = ci_nr - 1;
+
+	state->ca.owner = THIS_MODULE;
+	state->ca.read_attribute_mem = altera_ci_read_attribute_mem;
+	state->ca.write_attribute_mem = altera_ci_write_attribute_mem;
+	state->ca.read_cam_control = altera_ci_read_cam_ctl;
+	state->ca.write_cam_control = altera_ci_write_cam_ctl;
+	state->ca.slot_reset = altera_ci_slot_reset;
+	state->ca.slot_shutdown = altera_ci_slot_shutdown;
+	state->ca.slot_ts_enable = altera_ci_slot_ts_ctl;
+	state->ca.poll_slot_status = altera_poll_ci_slot_status;
+	state->ca.data = state;
+
+	ret = dvb_ca_en50221_init(config->adapter,
+				   &state->ca,
+				   /* flags */ 0,
+				   /* n_slots */ 1);
+	if (0 != ret)
+		goto err;
+
+	inter->state[ci_nr - 1] = state;
+
+	altera_hw_filt_init(config, ci_nr);
+
+	if (inter->strt_wrk) {
+		INIT_WORK(&inter->work, netup_read_ci_status);
+		inter->strt_wrk = 0;
+	}
+
+	ci_dbg_print("%s: CI initialized!\n", __func__);
+
+	mutex_lock(&inter->fpga_mutex);
+
+	/* Enable div */
+	netup_fpga_op_rw(inter, NETUP_CI_TSA_DIV, 0x0, 0);
+	netup_fpga_op_rw(inter, NETUP_CI_TSB_DIV, 0x0, 0);
+
+	/* enable TS out */
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD);
+	store |= (3 << 4);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_REVISION, 0, NETUP_CI_FLG_RD);
+	/* enable irq */
+	netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0x44, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	ci_dbg_print("%s: NetUP CI Revision = 0x%x\n", __func__, ret);
+
+	schedule_work(&inter->work);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
+
+	kfree(state);
+	kfree(inter);
+
+	return ret;
+}
+EXPORT_SYMBOL(altera_ci_init);
+
+int altera_ci_tuner_reset(void *dev, int ci_nr)
+{
+	struct fpga_inode *temp_int = find_inode(dev);
+	struct fpga_internal *inter = NULL;
+	u8 store;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int == NULL)
+		return -1;
+
+	if (temp_int->internal == NULL)
+		return -1;
+
+	inter = temp_int->internal;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD);
+	store &= ~(4 << (2 - ci_nr));
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+	msleep(100);
+	store |= (4 << (2 - ci_nr));
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(altera_ci_tuner_reset);
diff --git a/drivers/media/pci/cx23885/altera-ci.h b/drivers/media/pci/cx23885/altera-ci.h
new file mode 100644
index 0000000000..3646936dab
--- /dev/null
+++ b/drivers/media/pci/cx23885/altera-ci.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * altera-ci.c
+ *
+ *  CI driver in conjunction with NetUp Dual DVB-T/C RF CI card
+ *
+ * Copyright (C) 2010 NetUP Inc.
+ * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ */
+#ifndef __ALTERA_CI_H
+#define __ALTERA_CI_H
+
+#define ALT_DATA	0x000000ff
+#define ALT_TDI		0x00008000
+#define ALT_TDO		0x00004000
+#define ALT_TCK		0x00002000
+#define ALT_RDY		0x00001000
+#define ALT_RD		0x00000800
+#define ALT_WR		0x00000400
+#define ALT_AD_RG	0x00000200
+#define ALT_CS		0x00000100
+
+struct altera_ci_config {
+	void *dev;/* main dev, for example cx23885_dev */
+	void *adapter;/* for CI to connect to */
+	struct dvb_demux *demux;/* for hardware PID filter to connect to */
+	int (*fpga_rw) (void *dev, int ad_rg, int val, int rw);
+};
+
+#if IS_REACHABLE(CONFIG_MEDIA_ALTERA_CI)
+
+extern int altera_ci_init(struct altera_ci_config *config, int ci_nr);
+extern void altera_ci_release(void *dev, int ci_nr);
+extern int altera_ci_irq(void *dev);
+extern int altera_ci_tuner_reset(void *dev, int ci_nr);
+
+#else
+
+static inline int altera_ci_init(struct altera_ci_config *config, int ci_nr)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline void altera_ci_release(void *dev, int ci_nr)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+}
+
+static inline int altera_ci_irq(void *dev)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline int altera_ci_tuner_reset(void *dev, int ci_nr)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+#endif
+#if 0
+static inline int altera_hw_filt_init(struct altera_ci_config *config,
+							int hw_filt_nr)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline void altera_hw_filt_release(void *dev, int filt_nr)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+}
+
+static inline int altera_pid_feed_control(void *dev, int filt_nr,
+		struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+#endif /* CONFIG_MEDIA_ALTERA_CI */
+
+#endif /* __ALTERA_CI_H */
diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c
new file mode 100644
index 0000000000..06e41f9209
--- /dev/null
+++ b/drivers/media/pci/cx23885/cimax2.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * cimax2.c
+ *
+ * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#include "cx23885.h"
+#include "cimax2.h"
+#include <media/dvb_ca_en50221.h>
+
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE  64
+
+/**** Bit definitions for MC417_RWD and MC417_OEN registers  ***
+  bits 31-16
++-----------+
+| Reserved  |
++-----------+
+  bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
++-------+-------+-------+-------+-------+-------+-------+-------+
+|  WR#  |  RD#  |       |  ACK# |  ADHI |  ADLO |  CS1# |  CS0# |
++-------+-------+-------+-------+-------+-------+-------+-------+
+ bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
++-------+-------+-------+-------+-------+-------+-------+-------+
+|  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+***/
+/* MC417 */
+#define NETUP_DATA		0x000000ff
+#define NETUP_WR		0x00008000
+#define NETUP_RD		0x00004000
+#define NETUP_ACK		0x00001000
+#define NETUP_ADHI		0x00000800
+#define NETUP_ADLO		0x00000400
+#define NETUP_CS1		0x00000200
+#define NETUP_CS0		0x00000100
+#define NETUP_EN_ALL		0x00001000
+#define NETUP_CTRL_OFF		(NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD)
+#define NETUP_CI_CTL		0x04
+#define NETUP_CI_RD		1
+
+#define NETUP_IRQ_DETAM		0x1
+#define NETUP_IRQ_IRQAM		0x4
+
+static unsigned int ci_dbg;
+module_param(ci_dbg, int, 0644);
+MODULE_PARM_DESC(ci_dbg, "Enable CI debugging");
+
+static unsigned int ci_irq_enable;
+module_param(ci_irq_enable, int, 0644);
+MODULE_PARM_DESC(ci_irq_enable, "Enable IRQ from CAM");
+
+#define ci_dbg_print(fmt, args...) \
+	do { \
+		if (ci_dbg) \
+			printk(KERN_DEBUG pr_fmt("%s: " fmt), \
+			       __func__, ##args); \
+	} while (0)
+
+#define ci_irq_flags() (ci_irq_enable ? NETUP_IRQ_IRQAM : 0)
+
+/* stores all private variables for communication with CI */
+struct netup_ci_state {
+	struct dvb_ca_en50221 ca;
+	struct mutex ca_mutex;
+	struct i2c_adapter *i2c_adap;
+	u8 ci_i2c_addr;
+	int status;
+	struct work_struct work;
+	void *priv;
+	u8 current_irq_mode;
+	int current_ci_flag;
+	unsigned long next_status_checked_time;
+};
+
+
+static int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
+						u8 *buf, int len)
+{
+	int ret;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= addr,
+			.flags	= 0,
+			.buf	= &reg,
+			.len	= 1
+		}, {
+			.addr	= addr,
+			.flags	= I2C_M_RD,
+			.buf	= buf,
+			.len	= len
+		}
+	};
+
+	ret = i2c_transfer(i2c_adap, msg, 2);
+
+	if (ret != 2) {
+		ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n",
+						__func__, reg, ret);
+
+		return -1;
+	}
+
+	ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n",
+						__func__, addr, reg, buf[0]);
+
+	return 0;
+}
+
+static int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
+						u8 *buf, int len)
+{
+	int ret;
+	u8 buffer[MAX_XFER_SIZE];
+
+	struct i2c_msg msg = {
+		.addr	= addr,
+		.flags	= 0,
+		.buf	= &buffer[0],
+		.len	= len + 1
+	};
+
+	if (1 + len > sizeof(buffer)) {
+		pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n",
+		       KBUILD_MODNAME, reg, len);
+		return -EINVAL;
+	}
+
+	buffer[0] = reg;
+	memcpy(&buffer[1], buf, len);
+
+	ret = i2c_transfer(i2c_adap, &msg, 1);
+
+	if (ret != 1) {
+		ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n",
+						__func__, reg, ret);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int netup_ci_get_mem(struct cx23885_dev *dev)
+{
+	int mem;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+
+	for (;;) {
+		mem = cx_read(MC417_RWD);
+		if ((mem & NETUP_ACK) == 0)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		udelay(1);
+	}
+
+	cx_set(MC417_RWD, NETUP_CTRL_OFF);
+
+	return mem & 0xff;
+}
+
+static int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
+				u8 flag, u8 read, int addr, u8 data)
+{
+	struct netup_ci_state *state = en50221->data;
+	struct cx23885_tsport *port = state->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	u8 store;
+	int mem;
+	int ret;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	if (state->current_ci_flag != flag) {
+		ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &store, 1);
+		if (ret != 0)
+			return ret;
+
+		store &= ~0x0c;
+		store |= flag;
+
+		ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &store, 1);
+		if (ret != 0)
+			return ret;
+	}
+	state->current_ci_flag = flag;
+
+	mutex_lock(&dev->gpio_lock);
+
+	/* write addr */
+	cx_write(MC417_OEN, NETUP_EN_ALL);
+	cx_write(MC417_RWD, NETUP_CTRL_OFF |
+				NETUP_ADLO | (0xff & addr));
+	cx_clear(MC417_RWD, NETUP_ADLO);
+	cx_write(MC417_RWD, NETUP_CTRL_OFF |
+				NETUP_ADHI | (0xff & (addr >> 8)));
+	cx_clear(MC417_RWD, NETUP_ADHI);
+
+	if (read) { /* data in */
+		cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA);
+	} else /* data out */
+		cx_write(MC417_RWD, NETUP_CTRL_OFF | data);
+
+	/* choose chip */
+	cx_clear(MC417_RWD,
+			(state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1);
+	/* read/write */
+	cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR);
+	mem = netup_ci_get_mem(dev);
+
+	mutex_unlock(&dev->gpio_lock);
+
+	if (!read)
+		if (mem < 0)
+			return -EREMOTEIO;
+
+	ci_dbg_print("%s: %s: chipaddr=[0x%x] addr=[0x%02x], %s=%x\n", __func__,
+			(read) ? "read" : "write", state->ci_i2c_addr, addr,
+			(flag == NETUP_CI_CTL) ? "ctl" : "mem",
+			(read) ? mem : data);
+
+	if (read)
+		return mem;
+
+	return 0;
+}
+
+int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr)
+{
+	return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0);
+}
+
+int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr, u8 data)
+{
+	return netup_ci_op_cam(en50221, slot, 0, 0, addr, data);
+}
+
+int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
+				 u8 addr)
+{
+	return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL,
+							NETUP_CI_RD, addr, 0);
+}
+
+int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
+							u8 addr, u8 data)
+{
+	return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data);
+}
+
+int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct netup_ci_state *state = en50221->data;
+	u8 buf =  0x80;
+	int ret;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	udelay(500);
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+
+	if (ret != 0)
+		return ret;
+
+	udelay(500);
+
+	buf = 0x00;
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+
+	msleep(1000);
+	dvb_ca_en50221_camready_irq(&state->ca, 0);
+
+	return 0;
+
+}
+
+int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	/* not implemented */
+	return 0;
+}
+
+static int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode)
+{
+	struct netup_ci_state *state = en50221->data;
+	int ret;
+
+	if (irq_mode == state->current_irq_mode)
+		return 0;
+
+	ci_dbg_print("%s: chipaddr=[0x%x] setting ci IRQ to [0x%x] \n",
+			__func__, state->ci_i2c_addr, irq_mode);
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0x1b, &irq_mode, 1);
+
+	if (ret != 0)
+		return ret;
+
+	state->current_irq_mode = irq_mode;
+
+	return 0;
+}
+
+int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct netup_ci_state *state = en50221->data;
+	u8 buf;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+			0, &buf, 1);
+	buf |= 0x60;
+
+	return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+}
+
+/* work handler */
+static void netup_read_ci_status(struct work_struct *work)
+{
+	struct netup_ci_state *state =
+			container_of(work, struct netup_ci_state, work);
+	u8 buf[33];
+	int ret;
+
+	/* CAM module IRQ processing. fast operation */
+	dvb_ca_en50221_frda_irq(&state->ca, 0);
+
+	/* CAM module INSERT/REMOVE processing. slow operation because of i2c
+	 * transfers */
+	if (time_after(jiffies, state->next_status_checked_time)
+			|| !state->status) {
+		ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &buf[0], 33);
+
+		state->next_status_checked_time = jiffies
+			+ msecs_to_jiffies(1000);
+
+		if (ret != 0)
+			return;
+
+		ci_dbg_print("%s: Slot Status Addr=[0x%04x], Reg=[0x%02x], data=%02x, TS config = %02x\n",
+			     __func__,	state->ci_i2c_addr, 0, buf[0], buf[0]);
+
+
+		if (buf[0] & 1)
+			state->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY;
+		else
+			state->status = 0;
+	}
+}
+
+/* CI irq handler */
+int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
+{
+	struct cx23885_tsport *port = NULL;
+	struct netup_ci_state *state = NULL;
+
+	ci_dbg_print("%s:\n", __func__);
+
+	if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1)))
+		return 0;
+
+	if (pci_status & PCI_MSK_GPIO0) {
+		port = &dev->ts1;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI0\n", __func__);
+	}
+
+	if (pci_status & PCI_MSK_GPIO1) {
+		port = &dev->ts2;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI1\n", __func__);
+	}
+
+	return 1;
+}
+
+int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+				     int slot, int open)
+{
+	struct netup_ci_state *state = en50221->data;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	netup_ci_set_irq(en50221, open ? (NETUP_IRQ_DETAM | ci_irq_flags())
+			: NETUP_IRQ_DETAM);
+
+	return state->status;
+}
+
+int netup_ci_init(struct cx23885_tsport *port)
+{
+	struct netup_ci_state *state;
+	u8 cimax_init[34] = {
+		0x00, /* module A control*/
+		0x00, /* auto select mask high A */
+		0x00, /* auto select mask low A */
+		0x00, /* auto select pattern high A */
+		0x00, /* auto select pattern low A */
+		0x44, /* memory access time A */
+		0x00, /* invert input A */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* module B control*/
+		0x00, /* auto select mask high B */
+		0x00, /* auto select mask low B */
+		0x00, /* auto select pattern high B */
+		0x00, /* auto select pattern low B */
+		0x44, /* memory access time B */
+		0x00, /* invert input B */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* auto select mask high Ext */
+		0x00, /* auto select mask low Ext */
+		0x00, /* auto select pattern high Ext */
+		0x00, /* auto select pattern low Ext */
+		0x00, /* RFU */
+		0x02, /* destination - module A */
+		0x01, /* power on (use it like store place) */
+		0x00, /* RFU */
+		0x00, /* int status read only */
+		ci_irq_flags() | NETUP_IRQ_DETAM, /* DETAM, IRQAM unmasked */
+		0x05, /* EXTINT=active-high, INT=push-pull */
+		0x00, /* USCG1 */
+		0x04, /* ack active low */
+		0x00, /* LOCK = 0 */
+		0x33, /* serial mode, rising in, rising out, MSB first*/
+		0x31, /* synchronization */
+	};
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+	state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL);
+	if (!state) {
+		ci_dbg_print("%s: Unable create CI structure!\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	port->port_priv = state;
+
+	switch (port->nr) {
+	case 1:
+		state->ci_i2c_addr = 0x40;
+		break;
+	case 2:
+		state->ci_i2c_addr = 0x41;
+		break;
+	}
+
+	state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap;
+	state->ca.owner = THIS_MODULE;
+	state->ca.read_attribute_mem = netup_ci_read_attribute_mem;
+	state->ca.write_attribute_mem = netup_ci_write_attribute_mem;
+	state->ca.read_cam_control = netup_ci_read_cam_ctl;
+	state->ca.write_cam_control = netup_ci_write_cam_ctl;
+	state->ca.slot_reset = netup_ci_slot_reset;
+	state->ca.slot_shutdown = netup_ci_slot_shutdown;
+	state->ca.slot_ts_enable = netup_ci_slot_ts_ctl;
+	state->ca.poll_slot_status = netup_poll_ci_slot_status;
+	state->ca.data = state;
+	state->priv = port;
+	state->current_irq_mode = ci_irq_flags() | NETUP_IRQ_DETAM;
+
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0, &cimax_init[0], 34);
+	/* lock registers */
+	ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0x1f, &cimax_init[0x18], 1);
+	/* power on slots */
+	ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0x18, &cimax_init[0x18], 1);
+
+	if (0 != ret)
+		goto err;
+
+	ret = dvb_ca_en50221_init(&port->frontends.adapter,
+				   &state->ca,
+				   /* flags */ 0,
+				   /* n_slots */ 1);
+	if (0 != ret)
+		goto err;
+
+	INIT_WORK(&state->work, netup_read_ci_status);
+	schedule_work(&state->work);
+
+	ci_dbg_print("%s: CI initialized!\n", __func__);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
+	kfree(state);
+	return ret;
+}
+
+void netup_ci_exit(struct cx23885_tsport *port)
+{
+	struct netup_ci_state *state;
+
+	if (NULL == port)
+		return;
+
+	state = (struct netup_ci_state *)port->port_priv;
+	if (NULL == state)
+		return;
+
+	if (NULL == state->ca.data)
+		return;
+
+	dvb_ca_en50221_release(&state->ca);
+	kfree(state);
+}
diff --git a/drivers/media/pci/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h
new file mode 100644
index 0000000000..79f9cca1b3
--- /dev/null
+++ b/drivers/media/pci/cx23885/cimax2.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * cimax2.h
+ *
+ * CIMax(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#ifndef CIMAX2_H
+#define CIMAX2_H
+#include <media/dvb_ca_en50221.h>
+
+extern int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr);
+extern int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr, u8 data);
+extern int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221,
+						int slot, u8 addr);
+extern int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221,
+						int slot, u8 addr, u8 data);
+extern int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status);
+extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+						int slot, int open);
+extern int netup_ci_init(struct cx23885_tsport *port);
+extern void netup_ci_exit(struct cx23885_tsport *port);
+
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c
new file mode 100644
index 0000000000..434677bd4a
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-417.c
@@ -0,0 +1,1566 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Support for a cx23417 mpeg encoder via cx23885 host port.
+ *
+ *    (c) 2004 Jelle Foks <jelle@foks.us>
+ *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
+ *    (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *      - CX23885/7/8 support
+ *
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
+ */
+
+#include "cx23885.h"
+#include "cx23885-ioctl.h"
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/drv-intf/cx2341x.h>
+
+#define CX23885_FIRM_IMAGE_SIZE 376836
+#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
+
+static unsigned int mpegbufs = 32;
+module_param(mpegbufs, int, 0644);
+MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32");
+static unsigned int mpeglines = 32;
+module_param(mpeglines, int, 0644);
+MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32");
+static unsigned int mpeglinesize = 512;
+module_param(mpeglinesize, int, 0644);
+MODULE_PARM_DESC(mpeglinesize,
+	"number of bytes in each line of an MPEG buffer, range 512-1024");
+
+static unsigned int v4l_debug;
+module_param(v4l_debug, int, 0644);
+MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (v4l_debug >= level) \
+		printk(KERN_DEBUG pr_fmt("%s: 417:" fmt), \
+			__func__, ##arg); \
+	} while (0)
+
+static struct cx23885_tvnorm cx23885_tvnorms[] = {
+	{
+		.name      = "NTSC-M",
+		.id        = V4L2_STD_NTSC_M,
+	}, {
+		.name      = "NTSC-JP",
+		.id        = V4L2_STD_NTSC_M_JP,
+	}, {
+		.name      = "PAL-BG",
+		.id        = V4L2_STD_PAL_BG,
+	}, {
+		.name      = "PAL-DK",
+		.id        = V4L2_STD_PAL_DK,
+	}, {
+		.name      = "PAL-I",
+		.id        = V4L2_STD_PAL_I,
+	}, {
+		.name      = "PAL-M",
+		.id        = V4L2_STD_PAL_M,
+	}, {
+		.name      = "PAL-N",
+		.id        = V4L2_STD_PAL_N,
+	}, {
+		.name      = "PAL-Nc",
+		.id        = V4L2_STD_PAL_Nc,
+	}, {
+		.name      = "PAL-60",
+		.id        = V4L2_STD_PAL_60,
+	}, {
+		.name      = "SECAM-L",
+		.id        = V4L2_STD_SECAM_L,
+	}, {
+		.name      = "SECAM-DK",
+		.id        = V4L2_STD_SECAM_DK,
+	}
+};
+
+/* ------------------------------------------------------------------ */
+enum cx23885_capture_type {
+	CX23885_MPEG_CAPTURE,
+	CX23885_RAW_CAPTURE,
+	CX23885_RAW_PASSTHRU_CAPTURE
+};
+enum cx23885_capture_bits {
+	CX23885_RAW_BITS_NONE             = 0x00,
+	CX23885_RAW_BITS_YUV_CAPTURE      = 0x01,
+	CX23885_RAW_BITS_PCM_CAPTURE      = 0x02,
+	CX23885_RAW_BITS_VBI_CAPTURE      = 0x04,
+	CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08,
+	CX23885_RAW_BITS_TO_HOST_CAPTURE  = 0x10
+};
+enum cx23885_capture_end {
+	CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */
+	CX23885_END_NOW, /* stop immediately, no irq */
+};
+enum cx23885_framerate {
+	CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */
+	CX23885_FRAMERATE_PAL_25   /* PAL: 25fps */
+};
+enum cx23885_stream_port {
+	CX23885_OUTPUT_PORT_MEMORY,
+	CX23885_OUTPUT_PORT_STREAMING,
+	CX23885_OUTPUT_PORT_SERIAL
+};
+enum cx23885_data_xfer_status {
+	CX23885_MORE_BUFFERS_FOLLOW,
+	CX23885_LAST_BUFFER,
+};
+enum cx23885_picture_mask {
+	CX23885_PICTURE_MASK_NONE,
+	CX23885_PICTURE_MASK_I_FRAMES,
+	CX23885_PICTURE_MASK_I_P_FRAMES = 0x3,
+	CX23885_PICTURE_MASK_ALL_FRAMES = 0x7,
+};
+enum cx23885_vbi_mode_bits {
+	CX23885_VBI_BITS_SLICED,
+	CX23885_VBI_BITS_RAW,
+};
+enum cx23885_vbi_insertion_bits {
+	CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA,
+	CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1,
+};
+enum cx23885_dma_unit {
+	CX23885_DMA_BYTES,
+	CX23885_DMA_FRAMES,
+};
+enum cx23885_dma_transfer_status_bits {
+	CX23885_DMA_TRANSFER_BITS_DONE = 0x01,
+	CX23885_DMA_TRANSFER_BITS_ERROR = 0x04,
+	CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10,
+};
+enum cx23885_pause {
+	CX23885_PAUSE_ENCODING,
+	CX23885_RESUME_ENCODING,
+};
+enum cx23885_copyright {
+	CX23885_COPYRIGHT_OFF,
+	CX23885_COPYRIGHT_ON,
+};
+enum cx23885_notification_type {
+	CX23885_NOTIFICATION_REFRESH,
+};
+enum cx23885_notification_status {
+	CX23885_NOTIFICATION_OFF,
+	CX23885_NOTIFICATION_ON,
+};
+enum cx23885_notification_mailbox {
+	CX23885_NOTIFICATION_NO_MAILBOX = -1,
+};
+enum cx23885_field1_lines {
+	CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */
+	CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */
+	CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */
+};
+enum cx23885_field2_lines {
+	CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */
+	CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */
+	CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */
+};
+enum cx23885_custom_data_type {
+	CX23885_CUSTOM_EXTENSION_USR_DATA,
+	CX23885_CUSTOM_PRIVATE_PACKET,
+};
+enum cx23885_mute {
+	CX23885_UNMUTE,
+	CX23885_MUTE,
+};
+enum cx23885_mute_video_mask {
+	CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00,
+	CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000,
+	CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000,
+};
+enum cx23885_mute_video_shift {
+	CX23885_MUTE_VIDEO_V_SHIFT = 8,
+	CX23885_MUTE_VIDEO_U_SHIFT = 16,
+	CX23885_MUTE_VIDEO_Y_SHIFT = 24,
+};
+
+/* defines below are from ivtv-driver.h */
+#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF
+
+/* Firmware API commands */
+#define IVTV_API_STD_TIMEOUT 500
+
+/* Registers */
+/* IVTV_REG_OFFSET */
+#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8)
+#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC)
+#define IVTV_REG_SPU (0x9050)
+#define IVTV_REG_HW_BLOCKS (0x9054)
+#define IVTV_REG_VPU (0x9058)
+#define IVTV_REG_APU (0xA064)
+
+/**** Bit definitions for MC417_RWD and MC417_OEN registers  ***
+  bits 31-16
++-----------+
+| Reserved  |
++-----------+
+  bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
++-------+-------+-------+-------+-------+-------+-------+-------+
+| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+ bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
++-------+-------+-------+-------+-------+-------+-------+-------+
+|MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+***/
+#define MC417_MIWR	0x8000
+#define MC417_MIRD	0x4000
+#define MC417_MICS	0x2000
+#define MC417_MIRDY	0x1000
+#define MC417_MIADDR	0x0F00
+#define MC417_MIDATA	0x00FF
+
+/* MIADDR* nibble definitions */
+#define  MCI_MEMORY_DATA_BYTE0          0x000
+#define  MCI_MEMORY_DATA_BYTE1          0x100
+#define  MCI_MEMORY_DATA_BYTE2          0x200
+#define  MCI_MEMORY_DATA_BYTE3          0x300
+#define  MCI_MEMORY_ADDRESS_BYTE2       0x400
+#define  MCI_MEMORY_ADDRESS_BYTE1       0x500
+#define  MCI_MEMORY_ADDRESS_BYTE0       0x600
+#define  MCI_REGISTER_DATA_BYTE0        0x800
+#define  MCI_REGISTER_DATA_BYTE1        0x900
+#define  MCI_REGISTER_DATA_BYTE2        0xA00
+#define  MCI_REGISTER_DATA_BYTE3        0xB00
+#define  MCI_REGISTER_ADDRESS_BYTE0     0xC00
+#define  MCI_REGISTER_ADDRESS_BYTE1     0xD00
+#define  MCI_REGISTER_MODE              0xE00
+
+/* Read and write modes */
+#define  MCI_MODE_REGISTER_READ         0
+#define  MCI_MODE_REGISTER_WRITE        1
+#define  MCI_MODE_MEMORY_READ           0
+#define  MCI_MODE_MEMORY_WRITE          0x40
+
+/*** Bit definitions for MC417_CTL register ****
+ bits 31-6   bits 5-4   bit 3    bits 2-1       Bit 0
++--------+-------------+--------+--------------+------------+
+|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN|
++--------+-------------+--------+--------------+------------+
+***/
+#define MC417_SPD_CTL(x)	(((x) << 4) & 0x00000030)
+#define MC417_GPIO_SEL(x)	(((x) << 1) & 0x00000006)
+#define MC417_UART_GPIO_EN	0x00000001
+
+/* Values for speed control */
+#define MC417_SPD_CTL_SLOW	0x1
+#define MC417_SPD_CTL_MEDIUM	0x0
+#define MC417_SPD_CTL_FAST	0x3     /* b'1x, but we use b'11 */
+
+/* Values for GPIO select */
+#define MC417_GPIO_SEL_GPIO3	0x3
+#define MC417_GPIO_SEL_GPIO2	0x2
+#define MC417_GPIO_SEL_GPIO1	0x1
+#define MC417_GPIO_SEL_GPIO0	0x0
+
+void cx23885_mc417_init(struct cx23885_dev *dev)
+{
+	u32 regval;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* Configure MC417_CTL register to defaults. */
+	regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST)	|
+		 MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3)	|
+		 MC417_UART_GPIO_EN;
+	cx_write(MC417_CTL, regval);
+
+	/* Configure MC417_OEN to defaults. */
+	regval = MC417_MIRDY;
+	cx_write(MC417_OEN, regval);
+
+	/* Configure MC417_RWD to defaults. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS;
+	cx_write(MC417_RWD, regval);
+}
+
+static int mc417_wait_ready(struct cx23885_dev *dev)
+{
+	u32 mi_ready;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+
+	for (;;) {
+		mi_ready = cx_read(MC417_RWD) & MC417_MIRDY;
+		if (mi_ready != 0)
+			return 0;
+		if (time_after(jiffies, timeout))
+			return -1;
+		udelay(1);
+	}
+}
+
+int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value)
+{
+	u32 regval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 |
+		(value & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+
+	/* Transition CS/WR to effect write transaction across bus. */
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 |
+		((value >> 8) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 |
+		((value >> 16) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 |
+		((value >> 24) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Indicate that this is a write. */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE |
+		MCI_MODE_REGISTER_WRITE;
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	return mc417_wait_ready(dev);
+}
+
+int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value)
+{
+	int retval;
+	u32 regval;
+	u32 tempval;
+	u32 dataval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 |
+		((address & 0x00FF));
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Indicate that this is a register read. */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE |
+		MCI_MODE_REGISTER_READ;
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	retval = mc417_wait_ready(dev);
+
+	/* switch the DAT0-7 GPIO[10:3] to input mode */
+	cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA);
+
+	/* Read data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+
+	/* Transition RD to effect read transaction across bus.
+	 * Transition 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)?
+	 * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its
+	 * input only...)
+	 */
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+
+	/* Collect byte */
+	tempval = cx_read(MC417_RWD);
+	dataval = tempval & 0x000000FF;
+
+	/* Bring CS and RD high. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 8);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 16);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 24);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	*value  = dataval;
+
+	return retval;
+}
+
+int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value)
+{
+	u32 regval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 |
+		(value & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+
+	/* Transition CS/WR to effect write transaction across bus. */
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 |
+		((value >> 8) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 |
+		((value >> 16) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 |
+		((value >> 24) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 |
+		MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	return mc417_wait_ready(dev);
+}
+
+int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
+{
+	int retval;
+	u32 regval;
+	u32 tempval;
+	u32 dataval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write address byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 |
+		MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	retval = mc417_wait_ready(dev);
+
+	/* switch the DAT0-7 GPIO[10:3] to input mode */
+	cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA);
+
+	/* Read data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+
+	/* Transition RD to effect read transaction across bus. */
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+
+	/* Collect byte */
+	tempval = cx_read(MC417_RWD);
+	dataval = ((tempval & 0x000000FF) << 24);
+
+	/* Bring CS and RD high. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 16);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 8);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= (tempval & 0x000000FF);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	*value  = dataval;
+
+	return retval;
+}
+
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Set the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val |= (mask & 0x000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Clear the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val &= ~(mask & 0x0000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	u32 val;
+
+	/* Enable GPIO direction bits */
+	mc417_register_read(dev, 0x9020, &val);
+	if (asoutput)
+		val |= (mask & 0x0000ffff);
+	else
+		val &= ~(mask & 0x0000ffff);
+
+	mc417_register_write(dev, 0x9020, val);
+}
+/* ------------------------------------------------------------------ */
+
+/* MPEG encoder API */
+static char *cmd_to_str(int cmd)
+{
+	switch (cmd) {
+	case CX2341X_ENC_PING_FW:
+		return  "PING_FW";
+	case CX2341X_ENC_START_CAPTURE:
+		return  "START_CAPTURE";
+	case CX2341X_ENC_STOP_CAPTURE:
+		return  "STOP_CAPTURE";
+	case CX2341X_ENC_SET_AUDIO_ID:
+		return  "SET_AUDIO_ID";
+	case CX2341X_ENC_SET_VIDEO_ID:
+		return  "SET_VIDEO_ID";
+	case CX2341X_ENC_SET_PCR_ID:
+		return  "SET_PCR_ID";
+	case CX2341X_ENC_SET_FRAME_RATE:
+		return  "SET_FRAME_RATE";
+	case CX2341X_ENC_SET_FRAME_SIZE:
+		return  "SET_FRAME_SIZE";
+	case CX2341X_ENC_SET_BIT_RATE:
+		return  "SET_BIT_RATE";
+	case CX2341X_ENC_SET_GOP_PROPERTIES:
+		return  "SET_GOP_PROPERTIES";
+	case CX2341X_ENC_SET_ASPECT_RATIO:
+		return  "SET_ASPECT_RATIO";
+	case CX2341X_ENC_SET_DNR_FILTER_MODE:
+		return  "SET_DNR_FILTER_MODE";
+	case CX2341X_ENC_SET_DNR_FILTER_PROPS:
+		return  "SET_DNR_FILTER_PROPS";
+	case CX2341X_ENC_SET_CORING_LEVELS:
+		return  "SET_CORING_LEVELS";
+	case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE:
+		return  "SET_SPATIAL_FILTER_TYPE";
+	case CX2341X_ENC_SET_VBI_LINE:
+		return  "SET_VBI_LINE";
+	case CX2341X_ENC_SET_STREAM_TYPE:
+		return  "SET_STREAM_TYPE";
+	case CX2341X_ENC_SET_OUTPUT_PORT:
+		return  "SET_OUTPUT_PORT";
+	case CX2341X_ENC_SET_AUDIO_PROPERTIES:
+		return  "SET_AUDIO_PROPERTIES";
+	case CX2341X_ENC_HALT_FW:
+		return  "HALT_FW";
+	case CX2341X_ENC_GET_VERSION:
+		return  "GET_VERSION";
+	case CX2341X_ENC_SET_GOP_CLOSURE:
+		return  "SET_GOP_CLOSURE";
+	case CX2341X_ENC_GET_SEQ_END:
+		return  "GET_SEQ_END";
+	case CX2341X_ENC_SET_PGM_INDEX_INFO:
+		return  "SET_PGM_INDEX_INFO";
+	case CX2341X_ENC_SET_VBI_CONFIG:
+		return  "SET_VBI_CONFIG";
+	case CX2341X_ENC_SET_DMA_BLOCK_SIZE:
+		return  "SET_DMA_BLOCK_SIZE";
+	case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10:
+		return  "GET_PREV_DMA_INFO_MB_10";
+	case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9:
+		return  "GET_PREV_DMA_INFO_MB_9";
+	case CX2341X_ENC_SCHED_DMA_TO_HOST:
+		return  "SCHED_DMA_TO_HOST";
+	case CX2341X_ENC_INITIALIZE_INPUT:
+		return  "INITIALIZE_INPUT";
+	case CX2341X_ENC_SET_FRAME_DROP_RATE:
+		return  "SET_FRAME_DROP_RATE";
+	case CX2341X_ENC_PAUSE_ENCODER:
+		return  "PAUSE_ENCODER";
+	case CX2341X_ENC_REFRESH_INPUT:
+		return  "REFRESH_INPUT";
+	case CX2341X_ENC_SET_COPYRIGHT:
+		return  "SET_COPYRIGHT";
+	case CX2341X_ENC_SET_EVENT_NOTIFICATION:
+		return  "SET_EVENT_NOTIFICATION";
+	case CX2341X_ENC_SET_NUM_VSYNC_LINES:
+		return  "SET_NUM_VSYNC_LINES";
+	case CX2341X_ENC_SET_PLACEHOLDER:
+		return  "SET_PLACEHOLDER";
+	case CX2341X_ENC_MUTE_VIDEO:
+		return  "MUTE_VIDEO";
+	case CX2341X_ENC_MUTE_AUDIO:
+		return  "MUTE_AUDIO";
+	case CX2341X_ENC_MISC:
+		return  "MISC";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static int cx23885_mbox_func(void *priv,
+			     u32 command,
+			     int in,
+			     int out,
+			     u32 data[CX2341X_MBOX_MAX_DATA])
+{
+	struct cx23885_dev *dev = priv;
+	unsigned long timeout;
+	u32 value, flag, retval = 0;
+	int i;
+
+	dprintk(3, "%s: command(0x%X) = %s\n", __func__, command,
+		cmd_to_str(command));
+
+	/* this may not be 100% safe if we can't read any memory location
+	   without side effects */
+	mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value);
+	if (value != 0x12345678) {
+		pr_err("Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n",
+			value, cmd_to_str(command));
+		return -1;
+	}
+
+	/* This read looks at 32 bits, but flag is only 8 bits.
+	 * Seems we also bail if CMD or TIMEOUT bytes are set???
+	 */
+	mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
+	if (flag) {
+		pr_err("ERROR: Mailbox appears to be in use (%x), cmd = %s\n",
+		       flag, cmd_to_str(command));
+		return -1;
+	}
+
+	flag |= 1; /* tell 'em we're working on it */
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	/* write command + args + fill remaining with zeros */
+	/* command code */
+	mc417_memory_write(dev, dev->cx23417_mailbox + 1, command);
+	mc417_memory_write(dev, dev->cx23417_mailbox + 3,
+		IVTV_API_STD_TIMEOUT); /* timeout */
+	for (i = 0; i < in; i++) {
+		mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]);
+		dprintk(3, "API Input %d = %d\n", i, data[i]);
+	}
+	for (; i < CX2341X_MBOX_MAX_DATA; i++)
+		mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0);
+
+	flag |= 3; /* tell 'em we're done writing */
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	/* wait for firmware to handle the API command */
+	timeout = jiffies + msecs_to_jiffies(10);
+	for (;;) {
+		mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
+		if (0 != (flag & 4))
+			break;
+		if (time_after(jiffies, timeout)) {
+			pr_err("ERROR: API Mailbox timeout\n");
+			return -1;
+		}
+		udelay(10);
+	}
+
+	/* read output values */
+	for (i = 0; i < out; i++) {
+		mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i);
+		dprintk(3, "API Output %d = %d\n", i, data[i]);
+	}
+
+	mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval);
+	dprintk(3, "API result = %d\n", retval);
+
+	flag = 0;
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	return retval;
+}
+
+/* We don't need to call the API often, so using just one
+ * mailbox will probably suffice
+ */
+static int cx23885_api_cmd(struct cx23885_dev *dev,
+			   u32 command,
+			   u32 inputcnt,
+			   u32 outputcnt,
+			   ...)
+{
+	u32 data[CX2341X_MBOX_MAX_DATA];
+	va_list vargs;
+	int i, err;
+
+	dprintk(3, "%s() cmds = 0x%08x\n", __func__, command);
+
+	va_start(vargs, outputcnt);
+	for (i = 0; i < inputcnt; i++)
+		data[i] = va_arg(vargs, int);
+
+	err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data);
+	for (i = 0; i < outputcnt; i++) {
+		int *vptr = va_arg(vargs, int *);
+		*vptr = data[i];
+	}
+	va_end(vargs);
+
+	return err;
+}
+
+static int cx23885_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA])
+{
+	return cx23885_mbox_func(priv, cmd, in, out, data);
+}
+
+static int cx23885_find_mailbox(struct cx23885_dev *dev)
+{
+	u32 signature[4] = {
+		0x12345678, 0x34567812, 0x56781234, 0x78123456
+	};
+	int signaturecnt = 0;
+	u32 value;
+	int i;
+
+	dprintk(2, "%s()\n", __func__);
+
+	for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) {
+		mc417_memory_read(dev, i, &value);
+		if (value == signature[signaturecnt])
+			signaturecnt++;
+		else
+			signaturecnt = 0;
+		if (4 == signaturecnt) {
+			dprintk(1, "Mailbox signature found at 0x%x\n", i+1);
+			return i+1;
+		}
+	}
+	pr_err("Mailbox signature values not found!\n");
+	return -1;
+}
+
+static int cx23885_load_firmware(struct cx23885_dev *dev)
+{
+	static const unsigned char magic[8] = {
+		0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa
+	};
+	const struct firmware *firmware;
+	int i, retval = 0;
+	u32 value = 0;
+	u32 gpio_output = 0;
+	u32 gpio_value;
+	u32 checksum = 0;
+	u32 *dataptr;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* Save GPIO settings before reset of APU */
+	retval |= mc417_memory_read(dev, 0x9020, &gpio_output);
+	retval |= mc417_memory_read(dev, 0x900C, &gpio_value);
+
+	retval  = mc417_register_write(dev,
+		IVTV_REG_VPU, 0xFFFFFFED);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_APU, 0);
+
+	if (retval != 0) {
+		pr_err("%s: Error with mc417_register_write\n",
+			__func__);
+		return -1;
+	}
+
+	retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME,
+				  &dev->pci->dev);
+
+	if (retval != 0) {
+		pr_err("ERROR: Hotplug firmware request failed (%s).\n",
+		       CX23885_FIRM_IMAGE_NAME);
+		pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");
+		return -1;
+	}
+
+	if (firmware->size != CX23885_FIRM_IMAGE_SIZE) {
+		pr_err("ERROR: Firmware size mismatch (have %zu, expected %d)\n",
+		       firmware->size, CX23885_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
+		return -1;
+	}
+
+	if (0 != memcmp(firmware->data, magic, 8)) {
+		pr_err("ERROR: Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
+		return -1;
+	}
+
+	/* transfer to the chip */
+	dprintk(2, "Loading firmware ...\n");
+	dataptr = (u32 *)firmware->data;
+	for (i = 0; i < (firmware->size >> 2); i++) {
+		value = *dataptr;
+		checksum += ~value;
+		if (mc417_memory_write(dev, i, value) != 0) {
+			pr_err("ERROR: Loading firmware failed!\n");
+			release_firmware(firmware);
+			return -1;
+		}
+		dataptr++;
+	}
+
+	/* read back to verify with the checksum */
+	dprintk(1, "Verifying firmware ...\n");
+	for (i--; i >= 0; i--) {
+		if (mc417_memory_read(dev, i, &value) != 0) {
+			pr_err("ERROR: Reading firmware failed!\n");
+			release_firmware(firmware);
+			return -1;
+		}
+		checksum -= ~value;
+	}
+	if (checksum) {
+		pr_err("ERROR: Firmware load failed (checksum mismatch).\n");
+		release_firmware(firmware);
+		return -1;
+	}
+	release_firmware(firmware);
+	dprintk(1, "Firmware upload successful.\n");
+
+	retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
+		IVTV_CMD_HW_BLOCKS_RST);
+
+	/* F/W power up disturbs the GPIOs, restore state */
+	retval |= mc417_register_write(dev, 0x9020, gpio_output);
+	retval |= mc417_register_write(dev, 0x900C, gpio_value);
+
+	retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
+	retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8);
+
+	/* Hardcoded GPIO's here */
+	retval |= mc417_register_write(dev, 0x9020, 0x4000);
+	retval |= mc417_register_write(dev, 0x900C, 0x4000);
+
+	mc417_register_read(dev, 0x9020, &gpio_output);
+	mc417_register_read(dev, 0x900C, &gpio_value);
+
+	if (retval < 0)
+		pr_err("%s: Error with mc417_register_write\n",
+			__func__);
+	return 0;
+}
+
+void cx23885_417_check_encoder(struct cx23885_dev *dev)
+{
+	u32 status, seq;
+
+	status = seq = 0;
+	cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq);
+	dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq);
+}
+
+static void cx23885_codec_settings(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* Dynamically change the height based on video standard */
+	if (dev->encodernorm.id & V4L2_STD_525_60)
+		dev->ts1.height = 480;
+	else
+		dev->ts1.height = 576;
+
+	/* assign frame size */
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
+				dev->ts1.height, dev->ts1.width);
+
+	dev->cxhdl.width = dev->ts1.width;
+	dev->cxhdl.height = dev->ts1.height;
+	dev->cxhdl.is_50hz =
+		(dev->encodernorm.id & V4L2_STD_625_50) != 0;
+
+	cx2341x_handler_setup(&dev->cxhdl);
+
+	cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1);
+	cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1);
+}
+
+static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder)
+{
+	int version;
+	int retval;
+	u32 i, data[7];
+
+	dprintk(1, "%s()\n", __func__);
+
+	retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
+	if (retval < 0) {
+		dprintk(2, "%s() PING OK\n", __func__);
+		retval = cx23885_load_firmware(dev);
+		if (retval < 0) {
+			pr_err("%s() f/w load failed\n", __func__);
+			return retval;
+		}
+		retval = cx23885_find_mailbox(dev);
+		if (retval < 0) {
+			pr_err("%s() mailbox < 0, error\n",
+				__func__);
+			return -1;
+		}
+		dev->cx23417_mailbox = retval;
+		retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
+		if (retval < 0) {
+			pr_err("ERROR: cx23417 firmware ping failed!\n");
+			return -1;
+		}
+		retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
+			&version);
+		if (retval < 0) {
+			pr_err("ERROR: cx23417 firmware get encoder :version failed!\n");
+			return -1;
+		}
+		dprintk(1, "cx23417 firmware version is 0x%08x\n", version);
+		msleep(200);
+	}
+
+	cx23885_codec_settings(dev);
+	msleep(60);
+
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0,
+		CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115);
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0,
+		CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0);
+
+	/* Setup to capture VBI */
+	data[0] = 0x0001BD00;
+	data[1] = 1;          /* frames per interrupt */
+	data[2] = 4;          /* total bufs */
+	data[3] = 0x91559155; /* start codes */
+	data[4] = 0x206080C0; /* stop codes */
+	data[5] = 6;          /* lines */
+	data[6] = 64;         /* BPL */
+
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1],
+		data[2], data[3], data[4], data[5], data[6]);
+
+	for (i = 2; i <= 24; i++) {
+		int valid;
+
+		valid = ((i >= 19) && (i <= 21));
+		cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i,
+				valid, 0 , 0, 0);
+		cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0,
+				i | 0x80000000, valid, 0, 0, 0);
+	}
+
+	cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE);
+	msleep(60);
+
+	/* initialize the video input */
+	cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0);
+	msleep(60);
+
+	/* Enable VIP style pixel invalidation so we work with scaled mode */
+	mc417_memory_write(dev, 2120, 0x00000080);
+
+	/* start capturing to the host interface */
+	if (startencoder) {
+		cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0,
+			CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE);
+		msleep(10);
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx23885_dev *dev = q->drv_priv;
+
+	dev->ts1.ts_packet_size  = mpeglinesize;
+	dev->ts1.ts_packet_count = mpeglines;
+	*num_planes = 1;
+	sizes[0] = mpeglinesize * mpeglines;
+	*num_buffers = mpegbufs;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf =
+		container_of(vbuf, struct cx23885_buffer, vb);
+
+	return cx23885_buf_prepare(buf, &dev->ts1);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(dev, buf);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer   *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_buf_queue(&dev->ts1, buf);
+}
+
+static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &dev->ts1.mpegq;
+	unsigned long flags;
+	int ret;
+
+	ret = cx23885_initialize_codec(dev, 1);
+	if (ret == 0) {
+		struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+		cx23885_start_dma(&dev->ts1, dmaq, buf);
+		return 0;
+	}
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+	return ret;
+}
+
+static void cx23885_stop_streaming(struct vb2_queue *q)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+
+	/* stop mpeg capture */
+	cx23885_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
+			CX23885_END_NOW, CX23885_MPEG_CAPTURE,
+			CX23885_RAW_BITS_NONE);
+
+	msleep(500);
+	cx23885_417_check_encoder(dev);
+	cx23885_cancel_buffers(&dev->ts1);
+}
+
+static const struct vb2_ops cx23885_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = cx23885_start_streaming,
+	.stop_streaming = cx23885_stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	*id = dev->tvnorm;
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++)
+		if (id & cx23885_tvnorms[i].id)
+			break;
+	if (i == ARRAY_SIZE(cx23885_tvnorms))
+		return -EINVAL;
+
+	ret = cx23885_set_tvnorm(dev, id);
+	if (!ret)
+		dev->encodernorm = cx23885_tvnorms[i];
+	return ret;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+	struct v4l2_input *i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	dprintk(1, "%s()\n", __func__);
+	return cx23885_enum_input(dev, i);
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	return cx23885_get_input(file, priv, i);
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return cx23885_set_input(file, priv, i);
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (dev->tuner_type == TUNER_ABSENT)
+		return -EINVAL;
+	if (0 != t->index)
+		return -EINVAL;
+	strscpy(t->name, "Television", sizeof(t->name));
+	call_all(dev, tuner, g_tuner, t);
+
+	dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type);
+
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (dev->tuner_type == TUNER_ABSENT)
+		return -EINVAL;
+
+	/* Update the A/V core */
+	call_all(dev, tuner, s_tuner, t);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (dev->tuner_type == TUNER_ABSENT)
+		return -EINVAL;
+	f->type = V4L2_TUNER_ANALOG_TV;
+	f->frequency = dev->freq;
+
+	call_all(dev, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+	const struct v4l2_frequency *f)
+{
+	return cx23885_set_frequency(file, priv, f);
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	struct cx23885_tsport  *tsport = &dev->ts1;
+
+	strscpy(cap->driver, dev->name, sizeof(cap->driver));
+	strscpy(cap->card, cx23885_boards[tsport->dev->board].name,
+		sizeof(cap->card));
+	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+			    V4L2_CAP_STREAMING | V4L2_CAP_VBI_CAPTURE |
+			    V4L2_CAP_AUDIO | V4L2_CAP_DEVICE_CAPS;
+	if (dev->tuner_type != TUNER_ABSENT)
+		cap->capabilities |= V4L2_CAP_TUNER;
+
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if (f->index != 0)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_PIX_FMT_MPEG;
+
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	f->fmt.pix.width        = dev->ts1.width;
+	f->fmt.pix.height       = dev->ts1.height;
+	f->fmt.pix.field        = V4L2_FIELD_INTERLACED;
+	dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d\n",
+		dev->ts1.width, dev->ts1.height);
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	f->fmt.pix.field        = V4L2_FIELD_INTERLACED;
+	dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d\n",
+		dev->ts1.width, dev->ts1.height);
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	f->fmt.pix.field        = V4L2_FIELD_INTERLACED;
+	dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n",
+		f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field);
+	return 0;
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	char name[32 + 2];
+
+	snprintf(name, sizeof(name), "%s/2", dev->name);
+	call_all(dev, core, log_status);
+	v4l2_ctrl_handler_log_status(&dev->cxhdl.hdl, name);
+	return 0;
+}
+
+static const struct v4l2_file_operations mpeg_fops = {
+	.owner	       = THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = vb2_fop_release,
+	.read           = vb2_fop_read,
+	.poll		= vb2_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap           = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
+	.vidioc_g_std		 = vidioc_g_std,
+	.vidioc_s_std		 = vidioc_s_std,
+	.vidioc_enum_input	 = vidioc_enum_input,
+	.vidioc_g_input		 = vidioc_g_input,
+	.vidioc_s_input		 = vidioc_s_input,
+	.vidioc_g_tuner		 = vidioc_g_tuner,
+	.vidioc_s_tuner		 = vidioc_s_tuner,
+	.vidioc_g_frequency	 = vidioc_g_frequency,
+	.vidioc_s_frequency	 = vidioc_s_frequency,
+	.vidioc_querycap	 = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap	 = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	 = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	 = vidioc_s_fmt_vid_cap,
+	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
+	.vidioc_prepare_buf   = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf      = vb2_ioctl_querybuf,
+	.vidioc_qbuf          = vb2_ioctl_qbuf,
+	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
+	.vidioc_streamon      = vb2_ioctl_streamon,
+	.vidioc_streamoff     = vb2_ioctl_streamoff,
+	.vidioc_log_status	 = vidioc_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_chip_info	 = cx23885_g_chip_info,
+	.vidioc_g_register	 = cx23885_g_register,
+	.vidioc_s_register	 = cx23885_s_register,
+#endif
+};
+
+static struct video_device cx23885_mpeg_template = {
+	.name          = "cx23885",
+	.fops          = &mpeg_fops,
+	.ioctl_ops     = &mpeg_ioctl_ops,
+	.tvnorms       = CX23885_NORMS,
+};
+
+void cx23885_417_unregister(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	if (dev->v4l_device) {
+		if (video_is_registered(dev->v4l_device))
+			video_unregister_device(dev->v4l_device);
+		else
+			video_device_release(dev->v4l_device);
+		v4l2_ctrl_handler_free(&dev->cxhdl.hdl);
+		dev->v4l_device = NULL;
+	}
+}
+
+static struct video_device *cx23885_video_dev_alloc(
+	struct cx23885_tsport *tsport,
+	struct pci_dev *pci,
+	struct video_device *template,
+	char *type)
+{
+	struct video_device *vfd;
+	struct cx23885_dev *dev = tsport->dev;
+
+	dprintk(1, "%s()\n", __func__);
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+	*vfd = *template;
+	snprintf(vfd->name, sizeof(vfd->name), "%s (%s)",
+		cx23885_boards[tsport->dev->board].name, type);
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->release = video_device_release;
+	return vfd;
+}
+
+int cx23885_417_register(struct cx23885_dev *dev)
+{
+	/* FIXME: Port1 hardcoded here */
+	int err = -ENODEV;
+	struct cx23885_tsport *tsport = &dev->ts1;
+	struct vb2_queue *q;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER)
+		return err;
+
+	/* Set default TV standard */
+	dev->encodernorm = cx23885_tvnorms[0];
+
+	if (dev->encodernorm.id & V4L2_STD_525_60)
+		tsport->height = 480;
+	else
+		tsport->height = 576;
+
+	tsport->width = 720;
+	dev->cxhdl.port = CX2341X_PORT_SERIAL;
+	err = cx2341x_handler_init(&dev->cxhdl, 50);
+	if (err)
+		return err;
+	dev->cxhdl.priv = dev;
+	dev->cxhdl.func = cx23885_api_func;
+	cx2341x_handler_set_50hz(&dev->cxhdl, tsport->height == 576);
+	v4l2_ctrl_add_handler(&dev->ctrl_handler, &dev->cxhdl.hdl, NULL, false);
+
+	/* Allocate and initialize V4L video device */
+	dev->v4l_device = cx23885_video_dev_alloc(tsport,
+		dev->pci, &cx23885_mpeg_template, "mpeg");
+	q = &dev->vb2_mpegq;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx23885_buffer);
+	q->ops = &cx23885_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &dev->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		return err;
+	video_set_drvdata(dev->v4l_device, dev);
+	dev->v4l_device->lock = &dev->lock;
+	dev->v4l_device->queue = q;
+	dev->v4l_device->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+				       V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	if (dev->tuner_type != TUNER_ABSENT)
+		dev->v4l_device->device_caps |= V4L2_CAP_TUNER;
+	err = video_register_device(dev->v4l_device,
+		VFL_TYPE_VIDEO, -1);
+	if (err < 0) {
+		pr_info("%s: can't register mpeg device\n", dev->name);
+		return err;
+	}
+
+	pr_info("%s: registered device %s [mpeg]\n",
+	       dev->name, video_device_node_name(dev->v4l_device));
+
+	/* ST: Configure the encoder parameters, but don't begin
+	 * encoding, this resolves an issue where the first time the
+	 * encoder is started video can be choppy.
+	 */
+	cx23885_initialize_codec(dev, 0);
+
+	return 0;
+}
+
+MODULE_FIRMWARE(CX23885_FIRM_IMAGE_NAME);
diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
new file mode 100644
index 0000000000..25dc8d4dc5
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Support for CX23885 analog audio capture
+ *
+ *    (c) 2008 Mijhail Moreyra <mijhail.moreyra@gmail.com>
+ *    Adapted from cx88-alsa.c
+ *    (c) 2009 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include "cx23885.h"
+#include "cx23885-reg.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+#include <sound/tlv.h>
+
+#define AUDIO_SRAM_CHANNEL	SRAM_CH07
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (audio_debug + 1 > level)					\
+		printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \
+			chip->dev->name, ##arg); \
+} while(0)
+
+/****************************************************************************
+			Module global static vars
+ ****************************************************************************/
+
+static unsigned int disable_analog_audio;
+module_param(disable_analog_audio, int, 0644);
+MODULE_PARM_DESC(disable_analog_audio, "disable analog audio ALSA driver");
+
+static unsigned int audio_debug;
+module_param(audio_debug, int, 0644);
+MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]");
+
+/****************************************************************************
+			Board specific functions
+ ****************************************************************************/
+
+/* Constants taken from cx88-reg.h */
+#define AUD_INT_DN_RISCI1       (1 <<  0)
+#define AUD_INT_UP_RISCI1       (1 <<  1)
+#define AUD_INT_RDS_DN_RISCI1   (1 <<  2)
+#define AUD_INT_DN_RISCI2       (1 <<  4) /* yes, 3 is skipped */
+#define AUD_INT_UP_RISCI2       (1 <<  5)
+#define AUD_INT_RDS_DN_RISCI2   (1 <<  6)
+#define AUD_INT_DN_SYNC         (1 << 12)
+#define AUD_INT_UP_SYNC         (1 << 13)
+#define AUD_INT_RDS_DN_SYNC     (1 << 14)
+#define AUD_INT_OPC_ERR         (1 << 16)
+#define AUD_INT_BER_IRQ         (1 << 20)
+#define AUD_INT_MCHG_IRQ        (1 << 21)
+#define GP_COUNT_CONTROL_RESET	0x3
+
+static int cx23885_alsa_dma_init(struct cx23885_audio_dev *chip,
+				 unsigned long nr_pages)
+{
+	struct cx23885_audio_buffer *buf = chip->buf;
+	struct page *pg;
+	int i;
+
+	buf->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT);
+	if (NULL == buf->vaddr) {
+		dprintk(1, "vmalloc_32(%lu pages) failed\n", nr_pages);
+		return -ENOMEM;
+	}
+
+	dprintk(1, "vmalloc is at addr %p, size=%lu\n",
+		buf->vaddr, nr_pages << PAGE_SHIFT);
+
+	memset(buf->vaddr, 0, nr_pages << PAGE_SHIFT);
+	buf->nr_pages = nr_pages;
+
+	buf->sglist = vzalloc(array_size(sizeof(*buf->sglist), buf->nr_pages));
+	if (NULL == buf->sglist)
+		goto vzalloc_err;
+
+	sg_init_table(buf->sglist, buf->nr_pages);
+	for (i = 0; i < buf->nr_pages; i++) {
+		pg = vmalloc_to_page(buf->vaddr + i * PAGE_SIZE);
+		if (NULL == pg)
+			goto vmalloc_to_page_err;
+		sg_set_page(&buf->sglist[i], pg, PAGE_SIZE, 0);
+	}
+	return 0;
+
+vmalloc_to_page_err:
+	vfree(buf->sglist);
+	buf->sglist = NULL;
+vzalloc_err:
+	vfree(buf->vaddr);
+	buf->vaddr = NULL;
+	return -ENOMEM;
+}
+
+static int cx23885_alsa_dma_map(struct cx23885_audio_dev *dev)
+{
+	struct cx23885_audio_buffer *buf = dev->buf;
+
+	buf->sglen = dma_map_sg(&dev->pci->dev, buf->sglist,
+			buf->nr_pages, DMA_FROM_DEVICE);
+
+	if (0 == buf->sglen) {
+		pr_warn("%s: cx23885_alsa_map_sg failed\n", __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int cx23885_alsa_dma_unmap(struct cx23885_audio_dev *dev)
+{
+	struct cx23885_audio_buffer *buf = dev->buf;
+
+	if (!buf->sglen)
+		return 0;
+
+	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->nr_pages, DMA_FROM_DEVICE);
+	buf->sglen = 0;
+	return 0;
+}
+
+static int cx23885_alsa_dma_free(struct cx23885_audio_buffer *buf)
+{
+	vfree(buf->sglist);
+	buf->sglist = NULL;
+	vfree(buf->vaddr);
+	buf->vaddr = NULL;
+	return 0;
+}
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
+{
+	struct cx23885_audio_buffer *buf = chip->buf;
+	struct cx23885_dev *dev  = chip->dev;
+	struct sram_channel *audio_ch =
+		&dev->sram_channels[AUDIO_SRAM_CHANNEL];
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
+	cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+	/* setup fifo + format - out channel */
+	cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl,
+		buf->risc.dma);
+
+	/* sets bpl size */
+	cx_write(AUD_INT_A_LNGTH, buf->bpl);
+
+	/* This is required to get good audio (1 seems to be ok) */
+	cx_write(AUD_INT_A_MODE, 1);
+
+	/* reset counter */
+	cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+	atomic_set(&chip->count, 0);
+
+	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+		buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
+		chip->num_periods, buf->bpl * chip->num_periods);
+
+	/* Enables corresponding bits at AUD_INT_STAT */
+	cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				    AUD_INT_DN_RISCI1);
+
+	/* Clean any pending interrupt bits already set */
+	cx_write(AUDIO_INT_INT_STAT, ~0);
+
+	/* enable audio irqs */
+	cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */
+	cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and
+					  RISC enable */
+	if (audio_debug)
+		cx23885_sram_channel_dump(chip->dev, audio_ch);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int cx23885_stop_audio_dma(struct cx23885_audio_dev *chip)
+{
+	struct cx23885_dev *dev = chip->dev;
+	dprintk(1, "Stopping audio DMA\n");
+
+	/* stop dma */
+	cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+	/* disable irqs */
+	cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT);
+	cx_clear(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				    AUD_INT_DN_RISCI1);
+
+	if (audio_debug)
+		cx23885_sram_channel_dump(chip->dev,
+			&dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Handles audio IRQ
+ */
+int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask)
+{
+	struct cx23885_audio_dev *chip = dev->audio_dev;
+
+	if (0 == (status & mask))
+		return 0;
+
+	cx_write(AUDIO_INT_INT_STAT, status);
+
+	/* risc op code error */
+	if (status & AUD_INT_OPC_ERR) {
+		pr_warn("%s/1: Audio risc op code error\n",
+			dev->name);
+		cx_clear(AUD_INT_DMA_CTL, 0x11);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+	}
+	if (status & AUD_INT_DN_SYNC) {
+		dprintk(1, "Downstream sync error\n");
+		cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+		return 1;
+	}
+	/* risc1 downstream */
+	if (status & AUD_INT_DN_RISCI1) {
+		atomic_set(&chip->count, cx_read(AUD_INT_A_GPCNT));
+		snd_pcm_period_elapsed(chip->substream);
+	}
+	/* FIXME: Any other status should deserve a special handling? */
+
+	return 1;
+}
+
+static int dsp_buffer_free(struct cx23885_audio_dev *chip)
+{
+	struct cx23885_riscmem *risc;
+
+	BUG_ON(!chip->dma_size);
+
+	dprintk(2, "Freeing buffer\n");
+	cx23885_alsa_dma_unmap(chip);
+	cx23885_alsa_dma_free(chip->buf);
+	risc = &chip->buf->risc;
+	dma_free_coherent(&chip->pci->dev, risc->size, risc->cpu, risc->dma);
+	kfree(chip->buf);
+
+	chip->buf = NULL;
+	chip->dma_size = 0;
+
+	return 0;
+}
+
+/****************************************************************************
+				ALSA PCM Interface
+ ****************************************************************************/
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE	4096
+
+static const struct snd_pcm_hardware snd_cx23885_digital_hw = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+	.rates =		SNDRV_PCM_RATE_48000,
+	.rate_min =		48000,
+	.rate_max =		48000,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* Analog audio output will be full of clicks and pops if there
+	   are not exactly four lines in the SRAM FIFO buffer.  */
+	.period_bytes_min = DEFAULT_FIFO_SIZE/4,
+	.period_bytes_max = DEFAULT_FIFO_SIZE/4,
+	.periods_min = 1,
+	.periods_max = 1024,
+	.buffer_bytes_max = (1024*1024),
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err;
+
+	if (!chip) {
+		pr_err("BUG: cx23885 can't find device struct. Can't proceed with open\n");
+		return -ENODEV;
+	}
+
+	err = snd_pcm_hw_constraint_pow2(runtime, 0,
+		SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0)
+		goto _error;
+
+	chip->substream = substream;
+
+	runtime->hw = snd_cx23885_digital_hw;
+
+	if (chip->dev->sram_channels[AUDIO_SRAM_CHANNEL].fifo_size !=
+		DEFAULT_FIFO_SIZE) {
+		unsigned int bpl = chip->dev->
+			sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 4;
+		bpl &= ~7; /* must be multiple of 8 */
+		runtime->hw.period_bytes_min = bpl;
+		runtime->hw.period_bytes_max = bpl;
+	}
+
+	return 0;
+_error:
+	dprintk(1, "Error opening PCM!\n");
+	return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_cx23885_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+
+/*
+ * hw_params callback
+ */
+static int snd_cx23885_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *hw_params)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct cx23885_audio_buffer *buf;
+	int ret;
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	chip->period_size = params_period_bytes(hw_params);
+	chip->num_periods = params_periods(hw_params);
+	chip->dma_size = chip->period_size * params_periods(hw_params);
+
+	BUG_ON(!chip->dma_size);
+	BUG_ON(chip->num_periods & (chip->num_periods-1));
+
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+	if (NULL == buf)
+		return -ENOMEM;
+
+	buf->bpl = chip->period_size;
+	chip->buf = buf;
+
+	ret = cx23885_alsa_dma_init(chip,
+			(PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT));
+	if (ret < 0)
+		goto error;
+
+	ret = cx23885_alsa_dma_map(chip);
+	if (ret < 0)
+		goto error;
+
+	ret = cx23885_risc_databuffer(chip->pci, &buf->risc, buf->sglist,
+				   chip->period_size, chip->num_periods, 1);
+	if (ret < 0)
+		goto error;
+
+	/* Loop back to start of program */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	substream->runtime->dma_area = chip->buf->vaddr;
+	substream->runtime->dma_bytes = chip->dma_size;
+	substream->runtime->dma_addr = 0;
+
+	return 0;
+
+error:
+	kfree(buf);
+	chip->buf = NULL;
+	return ret;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_cx23885_hw_free(struct snd_pcm_substream *substream)
+{
+
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_cx23885_prepare(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/*
+ * trigger callback
+ */
+static int snd_cx23885_card_trigger(struct snd_pcm_substream *substream,
+	int cmd)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	/* Local interrupts are already disabled by ALSA */
+	spin_lock(&chip->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = cx23885_start_audio_dma(chip);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = cx23885_stop_audio_dma(chip);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&chip->lock);
+
+	return err;
+}
+
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_cx23885_pointer(
+	struct snd_pcm_substream *substream)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	u16 count;
+
+	count = atomic_read(&chip->count);
+
+	return runtime->period_size * (count & (runtime->periods-1));
+}
+
+/*
+ * page callback (needed for mmap)
+ */
+static struct page *snd_cx23885_page(struct snd_pcm_substream *substream,
+				unsigned long offset)
+{
+	void *pageptr = substream->runtime->dma_area + offset;
+	return vmalloc_to_page(pageptr);
+}
+
+/*
+ * operators
+ */
+static const struct snd_pcm_ops snd_cx23885_pcm_ops = {
+	.open = snd_cx23885_pcm_open,
+	.close = snd_cx23885_close,
+	.hw_params = snd_cx23885_hw_params,
+	.hw_free = snd_cx23885_hw_free,
+	.prepare = snd_cx23885_prepare,
+	.trigger = snd_cx23885_card_trigger,
+	.pointer = snd_cx23885_pointer,
+	.page = snd_cx23885_page,
+};
+
+/*
+ * create a PCM device
+ */
+static int snd_cx23885_pcm(struct cx23885_audio_dev *chip, int device,
+	char *name)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
+	if (err < 0)
+		return err;
+	pcm->private_data = chip;
+	strscpy(pcm->name, name, sizeof(pcm->name));
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx23885_pcm_ops);
+
+	return 0;
+}
+
+/****************************************************************************
+			Basic Flow for Sound Devices
+ ****************************************************************************/
+
+/*
+ * Alsa Constructor - Component probe
+ */
+
+struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
+{
+	struct snd_card *card;
+	struct cx23885_audio_dev *chip;
+	int err;
+
+	if (disable_analog_audio)
+		return NULL;
+
+	if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) {
+		pr_warn("%s(): Missing SRAM channel configuration for analog TV Audio\n",
+		       __func__);
+		return NULL;
+	}
+
+	err = snd_card_new(&dev->pci->dev,
+			   SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			THIS_MODULE, sizeof(struct cx23885_audio_dev), &card);
+	if (err < 0)
+		goto error_msg;
+
+	chip = (struct cx23885_audio_dev *) card->private_data;
+	chip->dev = dev;
+	chip->pci = dev->pci;
+	chip->card = card;
+	spin_lock_init(&chip->lock);
+
+	err = snd_cx23885_pcm(chip, 0, "CX23885 Digital");
+	if (err < 0)
+		goto error;
+
+	strscpy(card->driver, "CX23885", sizeof(card->driver));
+	sprintf(card->shortname, "Conexant CX23885");
+	sprintf(card->longname, "%s at %s", card->shortname, dev->name);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	dprintk(0, "registered ALSA audio device\n");
+
+	return chip;
+
+error:
+	snd_card_free(card);
+error_msg:
+	pr_err("%s(): Failed to register analog audio adapter\n",
+	       __func__);
+
+	return NULL;
+}
+
+/*
+ * ALSA destructor
+ */
+void cx23885_audio_unregister(struct cx23885_dev *dev)
+{
+	struct cx23885_audio_dev *chip = dev->audio_dev;
+
+	snd_card_free(chip->card);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-av.c b/drivers/media/pci/cx23885/cx23885-av.c
new file mode 100644
index 0000000000..f8ac29056b
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-av.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#include "cx23885.h"
+#include "cx23885-av.h"
+#include "cx23885-video.h"
+
+void cx23885_av_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			   container_of(work, struct cx23885_dev, cx25840_work);
+	bool handled = false;
+
+	v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
+			 PCI_MSK_AV_CORE, &handled);
+
+	/* Getting here with the interrupt not handled
+	   then probbaly flatiron does have pending interrupts.
+	*/
+	if (!handled) {
+		/* clear left and right adc channel interrupt request flag */
+		cx23885_flatiron_write(dev, 0x1f,
+			cx23885_flatiron_read(dev, 0x1f) | 0x80);
+		cx23885_flatiron_write(dev, 0x23,
+			cx23885_flatiron_read(dev, 0x23) | 0x80);
+	}
+
+	cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-av.h b/drivers/media/pci/cx23885/cx23885-av.h
new file mode 100644
index 0000000000..11a0941aee
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-av.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23885_AV_H_
+#define _CX23885_AV_H_
+void cx23885_av_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
new file mode 100644
index 0000000000..9244b43205
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -0,0 +1,2493 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <media/drv-intf/cx25840.h>
+#include <linux/firmware.h>
+#include <misc/altera.h>
+
+#include "xc2028.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
+#include "altera-ci.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "cx23888-ir.h"
+
+static unsigned int netup_card_rev = 4;
+module_param(netup_card_rev, int, 0644);
+MODULE_PARM_DESC(netup_card_rev,
+		"NetUP Dual DVB-T/C CI card revision");
+static unsigned int enable_885_ir;
+module_param(enable_885_ir, int, 0644);
+MODULE_PARM_DESC(enable_885_ir,
+		 "Enable integrated IR controller for supported\n"
+		 "\t\t    CX2388[57] boards that are wired for it:\n"
+		 "\t\t\tHVR-1250 (reported safe)\n"
+		 "\t\t\tTerraTec Cinergy T PCIe Dual (not well tested, appears to be safe)\n"
+		 "\t\t\tTeVii S470 (reported unsafe)\n"
+		 "\t\t    This can cause an interrupt storm with some cards.\n"
+		 "\t\t    Default: 0 [Disabled]");
+
+/* ------------------------------------------------------------------ */
+/* board config info                                                  */
+
+struct cx23885_board cx23885_boards[] = {
+	[CX23885_BOARD_UNKNOWN] = {
+		.name		= "UNKNOWN/GENERIC",
+		/* Ensure safe default for unknown boards */
+		.clk_freq       = 0,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = 1,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE3,
+			.vmux   = 2,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE4,
+			.vmux   = 3,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
+		.name		= "Hauppauge WinTV-HVR1800lp",
+		.portc		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,
+		}, {
+			.type   = CX23885_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xff02,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
+		.name		= "Hauppauge WinTV-HVR1800",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.tuner_bus	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.amux   = CX25840_AUDIO8,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
+		.name		= "Hauppauge WinTV-HVR1250",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.tuner_bus	= 1,
+#endif
+		.force_bff	= 1,
+		.input          = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.amux   = CX25840_AUDIO8,
+			.gpio0  = 0xff00,
+		}, {
+#endif
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0xff02,
+		} },
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
+		.name		= "DViCO FusionHDTV5 Express",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
+		.name		= "Hauppauge WinTV-HVR1500Q",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
+		.name		= "Hauppauge WinTV-HVR1500",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC2028,
+		.tuner_addr	= 0x61, /* 0xc2 >> 1 */
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
+		.name		= "Hauppauge WinTV-HVR1200",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
+		.name		= "Hauppauge WinTV-HVR1700",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
+		.name		= "Hauppauge WinTV-HVR1400",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
+		.name		= "DViCO FusionHDTV7 Dual Express",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
+		.name		= "DViCO FusionHDTV DVB-T Dual Express",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
+		.name		= "Leadtek Winfast PxDVR3200 H",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200] = {
+		.name		= "Leadtek Winfast PxPVR2200",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.tuner_type	= TUNER_XC2028,
+		.tuner_addr	= 0x61,
+		.tuner_bus	= 1,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	= CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2,
+			.amux	= CX25840_AUDIO8,
+			.gpio0	= 0x704040,
+		}, {
+			.type	= CX23885_VMUX_COMPOSITE1,
+			.vmux	= CX25840_COMPOSITE1,
+			.amux	= CX25840_AUDIO7,
+			.gpio0	= 0x704040,
+		}, {
+			.type	= CX23885_VMUX_SVIDEO,
+			.vmux	= CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+			.amux	= CX25840_AUDIO7,
+			.gpio0	= 0x704040,
+		}, {
+			.type	= CX23885_VMUX_COMPONENT,
+			.vmux	= CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+			.amux	= CX25840_AUDIO7,
+			.gpio0	= 0x704040,
+		} },
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = {
+		.name		= "Leadtek Winfast PxDVR3200 H XC4000",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_type	= UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	= CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type	= CX23885_VMUX_COMPOSITE1,
+			.vmux	= CX25840_COMPOSITE1,
+		}, {
+			.type	= CX23885_VMUX_SVIDEO,
+			.vmux	= CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type	= CX23885_VMUX_COMPONENT,
+			.vmux	= CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
+		.name		= "Compro VideoMate E650F",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6920] = {
+		.name		= "TurboSight TBS 6920",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6980] = {
+		.name		= "TurboSight TBS 6980",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6981] = {
+		.name		= "TurboSight TBS 6981",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TEVII_S470] = {
+		.name		= "TeVii S470",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBWORLD_2005] = {
+		.name		= "DVBWorld DVB-S2 2005",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
+		.ci_type	= 1,
+		.name		= "NetUP Dual DVB-S2 CI",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1270] = {
+		.name		= "Hauppauge WinTV-HVR1270",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1275] = {
+		.name		= "Hauppauge WinTV-HVR1275",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
+		.name		= "Hauppauge WinTV-HVR1210",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_MYGICA_X8506] = {
+		.name		= "Mygica X8506 DMB-TH",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+			},
+		},
+	},
+	[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
+		.name		= "Magic-Pro ProHDTV Extreme 2",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+			},
+		},
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+		.name		= "Hauppauge WinTV-HVR1850",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
+		.name		= "Compro VideoMate E800",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1290] = {
+		.name		= "Hauppauge WinTV-HVR1290",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_MYGICA_X8558PRO] = {
+		.name		= "Mygica X8558 PRO DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
+		.name           = "LEADTEK WinFast PxTV1200",
+		.porta          = CX23885_ANALOG_VIDEO,
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.tuner_bus	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type   = CX23885_VMUX_COMPONENT,
+			.vmux   = CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
+	[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
+		.name		= "GoTView X5 3D Hybrid",
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2,
+			.gpio0	= 0x02,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX23885_VMUX_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		} },
+	},
+	[CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = {
+		.ci_type	= 2,
+		.name		= "NetUP Dual DVB-T/C-CI RF",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+		.num_fds_portb	= 2,
+		.num_fds_portc	= 2,
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.input          = { {
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE1,
+		} },
+	},
+	[CX23885_BOARD_MPX885] = {
+		.name		= "MPX-885",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_COMPOSITE1,
+			.amux   = CX25840_AUDIO6,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = CX25840_COMPOSITE2,
+			.amux   = CX25840_AUDIO6,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE3,
+			.vmux   = CX25840_COMPOSITE3,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE4,
+			.vmux   = CX25840_COMPOSITE4,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_MYGICA_X8507] = {
+		.name		= "Mygica X8502/X8507 ISDB-T",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+				.amux   = CX25840_AUDIO8,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+				.amux   = CX25840_AUDIO7,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+				.amux   = CX25840_AUDIO7,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+				.amux   = CX25840_AUDIO7,
+			},
+		},
+	},
+	[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
+		.name		= "TerraTec Cinergy T PCIe Dual",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TEVII_S471] = {
+		.name		= "TeVii S471",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_PROF_8000] = {
+		.name		= "Prof Revolution DVB-S2 8000",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
+		.name		= "Hauppauge WinTV-HVR4400/HVR5500",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_NXP_TDA18271,
+		.tuner_addr	= 0x60, /* 0xc0 >> 1 */
+		.tuner_bus	= 1,
+	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST] = {
+		.name		= "Hauppauge WinTV Starburst",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_AVERMEDIA_HC81R] = {
+		.name		= "AVerTV Hybrid Express Slim HC81R",
+		.tuner_type	= TUNER_XC2028,
+		.tuner_addr	= 0x61, /* 0xc2 >> 1 */
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3 |
+				  CX25840_NONE1_CH3,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN8_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_VIN7_CH3 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO6,
+		}, {
+			.type   = CX23885_VMUX_COMPONENT,
+			.vmux   = CX25840_VIN1_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_NONE0_CH3 |
+				  CX25840_NONE1_CH3,
+			.amux   = CX25840_AUDIO6,
+		} },
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2] = {
+		.name		= "DViCO FusionHDTV DVB-T Dual Express2",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_IMPACTVCBE] = {
+		.name		= "Hauppauge ImpactVCB-e",
+		.tuner_type	= TUNER_ABSENT,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN4_CH2 |
+				  CX25840_VIN8_CH1 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_DVBSKY_T9580] = {
+		.name		= "DVBSky T9580",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBSKY_T980C] = {
+		.name		= "DVBSky T980C",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBSKY_S950C] = {
+		.name		= "DVBSky S950C",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TT_CT2_4500_CI] = {
+		.name		= "Technotrend TT-budget CT2-4500 CI",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBSKY_S950] = {
+		.name		= "DVBSky S950",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBSKY_S952] = {
+		.name		= "DVBSky S952",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBSKY_T982] = {
+		.name		= "DVBSky T982",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR5525] = {
+		.name		= "Hauppauge WinTV-HVR5525",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.force_bff	= 1,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	=	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN7_CH3 |
+				  CX25840_VIN8_CH1 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_VIEWCAST_260E] = {
+		.name		= "ViewCast 260e",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_COMPONENT,
+			.vmux   = CX25840_VIN7_CH3 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN5_CH1 |
+					CX25840_COMPONENT_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_VIEWCAST_460E] = {
+		.name		= "ViewCast 460e",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN4_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN7_CH3 |
+					CX25840_VIN6_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_COMPONENT,
+			.vmux   = CX25840_VIN7_CH3 |
+					CX25840_VIN6_CH1 |
+					CX25840_VIN5_CH2 |
+					CX25840_COMPONENT_ON,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB] = {
+		.name         = "Hauppauge WinTV-QuadHD-DVB",
+		.porta        = CX23885_ANALOG_VIDEO,
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885] = {
+		.name         = "Hauppauge WinTV-QuadHD-DVB(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+		.tuner_type   = TUNER_ABSENT,
+	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
+		.name         = "Hauppauge WinTV-QuadHD-ATSC",
+		.porta        = CX23885_ANALOG_VIDEO,
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885] = {
+		.name         = "Hauppauge WinTV-QuadHD-ATSC(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+		.tuner_type   = TUNER_ABSENT,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
+		.name		= "Hauppauge WinTV-HVR-1265(161111)",
+		.porta          = CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type     = TUNER_ABSENT,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST2] = {
+		.name		= "Hauppauge WinTV-Starburst2",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_AVERMEDIA_CE310B] = {
+		.name		= "AVerMedia CE310B",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN1_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_NONE0_CH3,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN8_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_VIN7_CH3 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+};
+const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct cx23885_subid cx23885_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x3400,
+		.card      = CX23885_BOARD_UNKNOWN,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7600,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7800,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7801,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7809,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7911,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7790,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7797,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7710,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7717,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x71d1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x71d3,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8101,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8010,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd618,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb78,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6681,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f21,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f39,
+		.card	   = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000,
+	}, {
+		.subvendor = 0x185b,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
+	}, {
+		.subvendor = 0x6920,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6920,
+	}, {
+		.subvendor = 0x6980,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6980,
+	}, {
+		.subvendor = 0x6981,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6981,
+	}, {
+		.subvendor = 0xd470,
+		.subdevice = 0x9022,
+		.card      = CX23885_BOARD_TEVII_S470,
+	}, {
+		.subvendor = 0x0001,
+		.subdevice = 0x2005,
+		.card      = CX23885_BOARD_DVBWORLD_2005,
+	}, {
+		.subvendor = 0x1b55,
+		.subdevice = 0x2a2c,
+		.card      = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2211,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1270,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2215,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x221d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2251,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2259,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2291,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2295,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2299,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x229d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f0,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f2,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f3,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f4,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f5,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8651,
+		.card      = CX23885_BOARD_MYGICA_X8506,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8657,
+		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8541,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
+	}, {
+		.subvendor = 0x1858,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8551,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1290,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8578,
+		.card      = CX23885_BOARD_MYGICA_X8558PRO,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f22,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
+	}, {
+		.subvendor = 0x5654,
+		.subdevice = 0x2390,
+		.card      = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
+	}, {
+		.subvendor = 0x1b55,
+		.subdevice = 0xe2e4,
+		.card      = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8502,
+		.card      = CX23885_BOARD_MYGICA_X8507,
+	}, {
+		.subvendor = 0x153b,
+		.subdevice = 0x117e,
+		.card      = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
+	}, {
+		.subvendor = 0xd471,
+		.subdevice = 0x9022,
+		.card      = CX23885_BOARD_TEVII_S471,
+	}, {
+		.subvendor = 0x8000,
+		.subdevice = 0x3034,
+		.card      = CX23885_BOARD_PROF_8000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xc108,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-4400 (Model 121xxx, Hybrid DVB-T/S2, IR) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xc138,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xc12a,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST, /* Hauppauge WinTV Starburst (Model 121x00, DVB-S2, IR) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xc1f8,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0xd939,
+		.card      = CX23885_BOARD_AVERMEDIA_HC81R,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7133,
+		.card      = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7137,
+		.card      = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb98,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x9580,
+		.card      = CX23885_BOARD_DVBSKY_T9580,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x980c,
+		.card      = CX23885_BOARD_DVBSKY_T980C,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x950c,
+		.card      = CX23885_BOARD_DVBSKY_S950C,
+	}, {
+		.subvendor = 0x13c2,
+		.subdevice = 0x3013,
+		.card      = CX23885_BOARD_TT_CT2_4500_CI,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x0950,
+		.card      = CX23885_BOARD_DVBSKY_S950,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x0952,
+		.card      = CX23885_BOARD_DVBSKY_S952,
+	}, {
+		.subvendor = 0x4254,
+		.subdevice = 0x0982,
+		.card      = CX23885_BOARD_DVBSKY_T982,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf038,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR5525,
+	}, {
+		.subvendor = 0x1576,
+		.subdevice = 0x0260,
+		.card      = CX23885_BOARD_VIEWCAST_260E,
+	}, {
+		.subvendor = 0x1576,
+		.subdevice = 0x0460,
+		.card      = CX23885_BOARD_VIEWCAST_460E,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6a28,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 1 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6b28,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6a18,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 1 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6b18,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2a18,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1265_K4, /* Hauppauge WinTV HVR-1265 (Model 161xx1, Hybrid ATSC/QAM-B) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf02a,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST2,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x3100,
+		.card      = CX23885_BOARD_AVERMEDIA_CE310B,
+	},
+};
+const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
+
+void cx23885_card_list(struct cx23885_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		pr_info("%s: Board has no valid PCIe Subsystem ID and can't\n"
+			"%s: be autodetected. Pass card=<n> insmod option\n"
+			"%s: to workaround that. Redirect complaints to the\n"
+			"%s: vendor of the TV card.  Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		pr_info("%s: Your board isn't known (yet) to the driver.\n"
+			"%s: Try to pick one of the existing card configs via\n"
+			"%s: card=<n> insmod option.  Updating to the latest\n"
+			"%s: version might help as well.\n",
+			dev->name, dev->name, dev->name, dev->name);
+	}
+	pr_info("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+	       dev->name);
+	for (i = 0; i < cx23885_bcount; i++)
+		pr_info("%s:    card=%d -> %s\n",
+			dev->name, i, cx23885_boards[i].name);
+}
+
+static void viewcast_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+	u32 sn;
+
+	/* The serial number record begins with tag 0x59 */
+	if (*(eeprom_data + 0x00) != 0x59) {
+		pr_info("%s() eeprom records are undefined, no serial number\n",
+			__func__);
+		return;
+	}
+
+	sn =	(*(eeprom_data + 0x06) << 24) |
+		(*(eeprom_data + 0x05) << 16) |
+		(*(eeprom_data + 0x04) << 8) |
+		(*(eeprom_data + 0x03));
+
+	pr_info("%s: card '%s' sn# MM%d\n",
+		dev->name,
+		cx23885_boards[dev->board].name,
+		sn);
+}
+
+static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&tv, eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 22001:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22009:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22011:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22019:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22021:
+		/* WinTV-HVR1275 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22029:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22101:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22109:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22111:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22119:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22121:
+		/* WinTV-HVR1275 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22129:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
+	case 71009:
+		/* WinTV-HVR1200 (PCIe, Retail, full height)
+		 * DVB-T and basic analog */
+	case 71100:
+		/* WinTV-ImpactVCB-e (PCIe, Retail, half height)
+		 * Basic analog */
+	case 71359:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71439:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71449:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71939:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71949:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71959:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71979:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71999:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 76601:
+		/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
+			channel ATSC and MPEG2 HW Encoder */
+	case 77001:
+		/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
+			and Basic analog */
+	case 77011:
+		/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
+			and Basic analog */
+	case 77041:
+		/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
+			and Basic analog */
+	case 77051:
+		/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
+			and Basic analog */
+	case 78011:
+		/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78501:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78521:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78531:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78631:
+		/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 79001:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
+			ATSC and Basic analog */
+	case 79101:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
+			ATSC and Basic analog */
+	case 79501:
+		/* WinTV-HVR1250 (PCIe, No IR, half height,
+			ATSC [at least] and Basic analog) */
+	case 79561:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
+	case 79571:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
+		 ATSC and Basic analog */
+	case 79671:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
+	case 80019:
+		/* WinTV-HVR1400 (Express Card, Retail, IR,
+		 * DVB-T and Basic analog */
+	case 81509:
+		/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
+		 * DVB-T and MPEG2 HW Encoder */
+	case 81519:
+		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
+		 * DVB-T and MPEG2 HW Encoder */
+		break;
+	case 85021:
+		/* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+		break;
+	case 85721:
+		/* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
+			Dual channel ATSC and Basic analog */
+	case 121019:
+		/* WinTV-HVR4400 (PCIe, DVB-S2, DVB-C/T) */
+		break;
+	case 121029:
+		/* WinTV-HVR5500 (PCIe, DVB-S2, DVB-C/T) */
+		break;
+	case 150329:
+		/* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
+		break;
+	case 161111:
+		/* WinTV-HVR-1265 K4 (PCIe, Analog/ATSC/QAM-B) */
+		break;
+	case 166100: /* 888 version, hybrid */
+	case 166200: /* 885 version, DVB only */
+		/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
+		   DVB-T/T2/C, DVB-T/T2/C */
+		break;
+	case 166101: /* 888 version, hybrid */
+	case 166201: /* 885 version, DVB only */
+		/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
+		   DVB-T/T2/C, DVB-T/T2/C */
+		break;
+	case 165100: /* 888 version, hybrid */
+	case 165200: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
+		break;
+	case 165101: /* 888 version, hybrid */
+	case 165201: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 2 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
+		break;
+	default:
+		pr_warn("%s: warning: unknown hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	pr_info("%s: hauppauge eeprom: model=%d\n",
+		dev->name, tv.model);
+}
+
+/* Some TBS cards require initing a chip using a bitbanged SPI attached
+   to the cx23885 gpio's. If this chip doesn't get init'ed the demod
+   doesn't respond to any command. */
+static void tbs_card_init(struct cx23885_dev *dev)
+{
+	int i;
+	static const u8 buf[] = {
+		0xe0, 0x06, 0x66, 0x33, 0x65,
+		0x01, 0x17, 0x06, 0xde};
+
+	switch (dev->board) {
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		cx_set(GP0_IO, 0x00070007);
+		usleep_range(1000, 10000);
+		cx_clear(GP0_IO, 2);
+		usleep_range(1000, 10000);
+		for (i = 0; i < 9 * 8; i++) {
+			cx_clear(GP0_IO, 7);
+			usleep_range(1000, 10000);
+			cx_set(GP0_IO,
+				((buf[i >> 3] >> (7 - (i & 7))) & 1) | 4);
+			usleep_range(1000, 10000);
+		}
+		cx_set(GP0_IO, 7);
+		break;
+	}
+}
+
+int cx23885_tuner_callback(void *priv, int component, int command, int arg)
+{
+	struct cx23885_tsport *port = priv;
+	struct cx23885_dev *dev = port->dev;
+	u32 bitmask = 0;
+
+	if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
+		return 0;
+
+	if (command != 0) {
+		pr_err("%s(): Unknown command 0x%x.\n",
+		       __func__, command);
+		return -EINVAL;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+		/* Tuner Reset Command */
+		bitmask = 0x04;
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2:
+		/* Two identical tuners on two different i2c buses,
+		 * we need to reset the correct gpio. */
+		if (port->nr == 1)
+			bitmask = 0x01;
+		else if (port->nr == 2)
+			bitmask = 0x04;
+		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		/* Tuner Reset Command */
+		bitmask = 0x02;
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		altera_ci_tuner_reset(dev, port->nr);
+		break;
+	case CX23885_BOARD_AVERMEDIA_HC81R:
+		/* XC3028L Reset Command */
+		bitmask = 1 << 2;
+		break;
+	}
+
+	if (bitmask) {
+		/* Drive the tuner into reset and back out */
+		cx_clear(GP0_IO, bitmask);
+		mdelay(200);
+		cx_set(GP0_IO, bitmask);
+	}
+
+	return 0;
+}
+
+void cx23885_gpio_setup(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* GPIO-0 cx24227 demodulator reset */
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+		/* GPIO-0 cx24227 demodulator */
+		/* GPIO-2 xc3028 tuner */
+
+		/* Put the parts into reset */
+		cx_set(GP0_IO, 0x00050000);
+		cx_clear(GP0_IO, 0x00000005);
+		msleep(5);
+
+		/* Bring the parts out of reset */
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+		/* GPIO-0 cx24227 demodulator reset */
+		/* GPIO-2 xc5000 tuner reset */
+		cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 8295A Reset */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+
+		/* CX23417 GPIO's */
+		/* EIO15 Zilog Reset */
+		/* EIO14 S5H1409/CX24227 Reset */
+		mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
+		msleep(100);
+
+		/* Bring the demod and blaster out of reset */
+		mc417_gpio_set(dev, GPIO_15 | GPIO_14);
+		msleep(100);
+
+		/* Force the TDA8295A into reset and back */
+		cx23885_gpio_enable(dev, GPIO_2, 1);
+		cx23885_gpio_set(dev, GPIO_2);
+		msleep(20);
+		cx23885_gpio_clear(dev, GPIO_2);
+		msleep(20);
+		cx23885_gpio_set(dev, GPIO_2);
+		msleep(20);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+		/* GPIO-0 tda10048 demodulator reset */
+		/* GPIO-2 tda18271 tuner reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x00000005);
+		msleep(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+		/* GPIO-0 TDA10048 demodulator reset */
+		/* GPIO-2 TDA8295A Reset */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+
+		/* The following GPIO's are on the interna AVCore (cx25840) */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 IR_TX 416/DVBT Select */
+		/* GPIO-21 IIS DAT */
+		/* GPIO-22 IIS WCLK */
+		/* GPIO-23 IIS BCLK */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x00000005);
+		msleep(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		/* GPIO-0  Dibcom7000p demodulator reset */
+		/* GPIO-2  xc3028L tuner reset */
+		/* GPIO-13 LED */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x00000005);
+		msleep(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		/* GPIO-0 xc5000 tuner reset i2c bus 0 */
+		/* GPIO-1 s5h1409 demod reset i2c bus 0 */
+		/* GPIO-2 xc5000 tuner reset i2c bus 1 */
+		/* GPIO-3 s5h1409 demod reset i2c bus 0 */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x000f0000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x0000000f);
+		msleep(20);
+		cx_set(GP0_IO, 0x000f000f);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2:
+		/* GPIO-0 portb xc3028 reset */
+		/* GPIO-1 portb zl10353 reset */
+		/* GPIO-2 portc xc3028 reset */
+		/* GPIO-3 portc zl10353 reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x000f0000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x0000000f);
+		msleep(20);
+		cx_set(GP0_IO, 0x000f000f);
+		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+		/* GPIO-2  xc3028 tuner reset */
+
+		/* The following GPIO's are on the internal AVCore (cx25840) */
+		/* GPIO-?  zl10353 demod reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00040000);
+		msleep(20);
+		cx_clear(GP0_IO, 0x00000004);
+		msleep(20);
+		cx_set(GP0_IO, 0x00040004);
+		break;
+	case CX23885_BOARD_TBS_6920:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_PROF_8000:
+		cx_write(MC417_CTL, 0x00000036);
+		cx_write(MC417_OEN, 0x00001000);
+		cx_set(MC417_RWD, 0x00000002);
+		msleep(200);
+		cx_clear(MC417_RWD, 0x00000800);
+		msleep(200);
+		cx_set(MC417_RWD, 0x00000800);
+		msleep(200);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		/* GPIO-0 INTA from CiMax1
+		   GPIO-1 INTB from CiMax2
+		   GPIO-2 reset chips
+		   GPIO-3 to GPIO-10 data/addr for CA
+		   GPIO-11 ~CS0 to CiMax1
+		   GPIO-12 ~CS1 to CiMax2
+		   GPIO-13 ADL0 load LSB addr
+		   GPIO-14 ADL1 load MSB addr
+		   GPIO-15 ~RDY from CiMax
+		   GPIO-17 ~RD to CiMax
+		   GPIO-18 ~WR to CiMax
+		 */
+		cx_set(GP0_IO, 0x00040000); /* GPIO as out */
+		/* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
+		cx_clear(GP0_IO, 0x00030004);
+		msleep(100);/* reset delay */
+		cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
+		cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
+		/* GPIO-15 IN as ~ACK, rest as OUT */
+		cx_write(MC417_OEN, 0x00001000);
+		/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+		cx_write(MC417_RWD, 0x0000c300);
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
+		/* GPIO-6 I2C Gate which can isolate the demod from the bus */
+		/* GPIO-9 Demod reset */
+
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
+		cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
+		cx23885_gpio_clear(dev, GPIO_9);
+		msleep(20);
+		cx23885_gpio_set(dev, GPIO_9);
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_MYGICA_X8507:
+		/* GPIO-0 (0)Analog / (1)Digital TV */
+		/* GPIO-1 reset XC5000 */
+		/* GPIO-2 demod reset */
+		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
+		cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
+		msleep(100);
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		/* GPIO-0 reset first ATBM8830 */
+		/* GPIO-1 reset second ATBM8830 */
+		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+		cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
+		msleep(100);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 Wake# */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 C_IR_TX */
+		/* GPIO-21 I2S DAT */
+		/* GPIO-22 I2S WCLK */
+		/* GPIO-23 I2S BCLK */
+		/* ALT GPIO: EXP GPIO LATCH */
+
+		/* CX23417 GPIO's */
+		/* GPIO-14 S5H1411/CX24228 Reset */
+		/* GPIO-13 EEPROM write protect */
+		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+		msleep(100);
+
+		/* Bring the demod out of reset */
+		mc417_gpio_set(dev, GPIO_14);
+		msleep(100);
+
+		/* CX24228 GPIO */
+		/* Connected to IF / Mux */
+		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		/* GPIO-0 ~INT in
+		   GPIO-1 TMS out
+		   GPIO-2 ~reset chips out
+		   GPIO-3 to GPIO-10 data/addr for CA in/out
+		   GPIO-11 ~CS out
+		   GPIO-12 ADDR out
+		   GPIO-13 ~WR out
+		   GPIO-14 ~RD out
+		   GPIO-15 ~RDY in
+		   GPIO-16 TCK out
+		   GPIO-17 TDO in
+		   GPIO-18 TDI out
+		 */
+		cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */
+		/* GPIO-0 as INT, reset & TMS low */
+		cx_clear(GP0_IO, 0x00010006);
+		msleep(100);/* reset delay */
+		cx_set(GP0_IO, 0x00000004); /* reset high */
+		cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */
+		/* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */
+		cx_write(MC417_OEN, 0x00005000);
+		/* ~RD, ~WR high; ADDR low; ~CS high */
+		cx_write(MC417_RWD, 0x00000d00);
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		/* GPIO-8 tda10071 demod reset */
+		/* GPIO-9 si2165 demod reset (only HVR4400/HVR5500)*/
+
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+
+		cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+
+		break;
+	case CX23885_BOARD_AVERMEDIA_HC81R:
+		cx_clear(MC417_CTL, 1);
+		/* GPIO-0,1,2 setup direction as output */
+		cx_set(GP0_IO, 0x00070000);
+		usleep_range(10000, 11000);
+		/* AF9013 demod reset */
+		cx_set(GP0_IO, 0x00010001);
+		usleep_range(10000, 11000);
+		cx_clear(GP0_IO, 0x00010001);
+		usleep_range(10000, 11000);
+		cx_set(GP0_IO, 0x00010001);
+		usleep_range(10000, 11000);
+		/* demod tune? */
+		cx_clear(GP0_IO, 0x00030003);
+		usleep_range(10000, 11000);
+		cx_set(GP0_IO, 0x00020002);
+		usleep_range(10000, 11000);
+		cx_set(GP0_IO, 0x00010001);
+		usleep_range(10000, 11000);
+		cx_clear(GP0_IO, 0x00020002);
+		/* XC3028L tuner reset */
+		cx_set(GP0_IO, 0x00040004);
+		cx_clear(GP0_IO, 0x00040004);
+		cx_set(GP0_IO, 0x00040004);
+		msleep(60);
+		break;
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+		/* enable GPIO3-18 pins */
+		cx_write(MC417_CTL, 0x00000037);
+		cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
+		cx23885_gpio_clear(dev, GPIO_2 | GPIO_11);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_2 | GPIO_11);
+		break;
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+		/*
+		 * GPIO-0 INTA from CiMax, input
+		 * GPIO-1 reset CiMax, output, high active
+		 * GPIO-2 reset demod, output, low active
+		 * GPIO-3 to GPIO-10 data/addr for CAM
+		 * GPIO-11 ~CS0 to CiMax1
+		 * GPIO-12 ~CS1 to CiMax2
+		 * GPIO-13 ADL0 load LSB addr
+		 * GPIO-14 ADL1 load MSB addr
+		 * GPIO-15 ~RDY from CiMax
+		 * GPIO-17 ~RD to CiMax
+		 * GPIO-18 ~WR to CiMax
+		 */
+
+		cx_set(GP0_IO, 0x00060002); /* GPIO 1/2 as output */
+		cx_clear(GP0_IO, 0x00010004); /* GPIO 0 as input */
+		msleep(100); /* reset delay */
+		cx_set(GP0_IO, 0x00060004); /* GPIO as out, reset high */
+		cx_clear(GP0_IO, 0x00010002);
+		cx_write(MC417_CTL, 0x00000037); /* enable GPIO3-18 pins */
+
+		/* GPIO-15 IN as ~ACK, rest as OUT */
+		cx_write(MC417_OEN, 0x00001000);
+
+		/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+		cx_write(MC417_RWD, 0x0000c300);
+
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000); /* INTERRUPTS active low */
+		break;
+	case CX23885_BOARD_DVBSKY_S950:
+		cx23885_gpio_enable(dev, GPIO_2, 1);
+		cx23885_gpio_clear(dev, GPIO_2);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_2);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+		/*
+		 * HVR5525 GPIO Details:
+		 *  GPIO-00 IR_WIDE
+		 *  GPIO-02 wake#
+		 *  GPIO-03 VAUX Pres.
+		 *  GPIO-07 PROG#
+		 *  GPIO-08 SAT_RESN
+		 *  GPIO-09 TER_RESN
+		 *  GPIO-10 B2_SENSE
+		 *  GPIO-11 B1_SENSE
+		 *  GPIO-15 IR_LED_STATUS
+		 *  GPIO-19 IR_NARROW
+		 *  GPIO-20 Blauster1
+		 *  ALTGPIO VAUX_SWITCH
+		 *  AUX_PLL_CLK : Blaster2
+		 */
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+		cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		break;
+	case CX23885_BOARD_VIEWCAST_260E:
+	case CX23885_BOARD_VIEWCAST_460E:
+		/* For documentation purposes, it's worth noting that this
+		 * card does not have any GPIO's connected to subcomponents.
+		 */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		/*
+		 * GPIO-08 TER1_RESN
+		 * GPIO-09 TER2_RESN
+		 */
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+		cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		break;
+	}
+}
+
+int cx23885_ir_init(struct cx23885_dev *dev)
+{
+	static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
+		{
+			.flags	  = BIT(V4L2_SUBDEV_IO_PIN_INPUT),
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}, {
+			.flags	  = BIT(V4L2_SUBDEV_IO_PIN_OUTPUT),
+			.pin	  = CX23885_PIN_IR_TX_GPIO20,
+			.function = CX23885_PAD_IR_TX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+	static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+		{
+			.flags	  = BIT(V4L2_SUBDEV_IO_PIN_INPUT),
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
+
+	struct v4l2_subdev_ir_parameters params;
+	int ret = 0;
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		/* FIXME: Implement me */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+		/*
+		 * For these boards we need to invert the Tx output via the
+		 * IR controller to have the LED off while idle
+		 */
+		v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, &params);
+		params.enable = false;
+		params.shutdown = false;
+		params.invert_level = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2:
+		request_module("ir-kbd-i2c");
+		break;
+	}
+
+	return ret;
+}
+
+void cx23885_ir_fini(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		cx23885_irq_remove(dev, PCI_MSK_IR);
+		cx23888_ir_remove(dev);
+		dev->sd_ir = NULL;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
+		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
+		dev->sd_ir = NULL;
+		break;
+	}
+}
+
+static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
+{
+	int data;
+	int tdo = 0;
+	struct cx23885_dev *dev = (struct cx23885_dev *)device;
+	/*TMS*/
+	data = ((cx_read(GP0_IO)) & (~0x00000002));
+	data |= (tms ? 0x00020002 : 0x00020000);
+	cx_write(GP0_IO, data);
+
+	/*TDI*/
+	data = ((cx_read(MC417_RWD)) & (~0x0000a000));
+	data |= (tdi ? 0x00008000 : 0);
+	cx_write(MC417_RWD, data);
+	if (read_tdo)
+		tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/
+
+	cx_write(MC417_RWD, data | 0x00002000);
+	udelay(1);
+	/*TCK*/
+	cx_write(MC417_RWD, data);
+
+	return tdo;
+}
+
+void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_IR);
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
+		break;
+	}
+}
+
+void cx23885_card_setup(struct cx23885_dev *dev)
+{
+	struct cx23885_tsport *ts1 = &dev->ts1;
+	struct cx23885_tsport *ts2 = &dev->ts2;
+
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client,
+			      eeprom, sizeof(eeprom));
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (dev->i2c_bus[0].i2c_rc == 0) {
+			if (eeprom[0x80] != 0x84)
+				hauppauge_eeprom(dev, eeprom+0xc0);
+			else
+				hauppauge_eeprom(dev, eeprom+0x80);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0x80);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0xc0);
+		break;
+	case CX23885_BOARD_VIEWCAST_260E:
+	case CX23885_BOARD_VIEWCAST_460E:
+		dev->i2c_bus[1].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[1].i2c_client,
+			      eeprom, sizeof(eeprom));
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			viewcast_eeprom(dev, eeprom);
+		break;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_AVERMEDIA_HC81R:
+		/* Defaults for VID B */
+		ts1->gen_ctrl_val  = 0x4; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		/* Defaults for VID C */
+		/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
+		ts2->gen_ctrl_val  = 0x10e;
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2:
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		fallthrough;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		/* Defaults for VID B - Analog encoder */
+		/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
+		ts1->gen_ctrl_val    = 0x10e;
+		ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+
+		/* APB_TSVALERR_POL (active low)*/
+		ts1->vld_misc_val    = 0x2000;
+		ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
+		cx_write(0x130184, 0xc);
+
+		/* Defaults for VID C */
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TBS_6920:
+		ts1->gen_ctrl_val  = 0x4; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TEVII_S471:
+	case CX23885_BOARD_DVBWORLD_2005:
+	case CX23885_BOARD_PROF_8000:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		tbs_card_init(dev);
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_MYGICA_X8507:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T982:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0x8; /* Serial bus */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_DVBSKY_S952:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xe; /* Serial bus */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+	default:
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+	}
+
+	/* Certain boards support analog, or require the avcore to be
+	 * loaded, ensure this happens.
+	 */
+	switch (dev->board) {
+	case CX23885_BOARD_TEVII_S470:
+		/* Currently only enabled for the integrated IR controller */
+		if (!enable_885_ir)
+			break;
+		fallthrough;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_MPX885:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_AVERMEDIA_HC81R:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_VIEWCAST_260E:
+	case CX23885_BOARD_VIEWCAST_460E:
+	case CX23885_BOARD_AVERMEDIA_CE310B:
+		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[2].i2c_adap,
+				"cx25840", 0x88 >> 1, NULL);
+		if (dev->sd_cx25840) {
+			/* set host data for clk_freq configuration */
+			v4l2_set_subdev_hostdata(dev->sd_cx25840,
+						&dev->clk_freq);
+
+			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
+			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+		}
+		break;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_VIEWCAST_260E:
+		v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[0].i2c_adap,
+				"cs3308", 0x82 >> 1, NULL);
+		break;
+	case CX23885_BOARD_VIEWCAST_460E:
+		/* This cs3308 controls the audio from the breakout cable */
+		v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[0].i2c_adap,
+				"cs3308", 0x80 >> 1, NULL);
+		/* This cs3308 controls the audio from the onboard header */
+		v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[0].i2c_adap,
+				"cs3308", 0x82 >> 1, NULL);
+		break;
+	}
+
+	/* AUX-PLL 27MHz CLK */
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		netup_initialize(dev);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+		int ret;
+		const struct firmware *fw;
+		const char *filename = "dvb-netup-altera-01.fw";
+		char *action = "configure";
+		static struct netup_card_info cinfo;
+		struct altera_config netup_config = {
+			.dev = dev,
+			.action = action,
+			.jtag_io = netup_jtag_io,
+		};
+
+		netup_initialize(dev);
+
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		if (netup_card_rev)
+			cinfo.rev = netup_card_rev;
+
+		switch (cinfo.rev) {
+		case 0x4:
+			filename = "dvb-netup-altera-04.fw";
+			break;
+		default:
+			filename = "dvb-netup-altera-01.fw";
+			break;
+		}
+		pr_info("NetUP card rev=0x%x fw_filename=%s\n",
+			cinfo.rev, filename);
+
+		ret = request_firmware(&fw, filename, &dev->pci->dev);
+		if (ret != 0)
+			pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.",
+			       filename);
+		else
+			altera_init(&netup_config, fw);
+
+		release_firmware(fw);
+		break;
+	}
+	}
+}
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
new file mode 100644
index 0000000000..c8705d786c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -0,0 +1,2273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+#include <linux/firmware.h>
+
+#include "cimax2.h"
+#include "altera-ci.h"
+#include "cx23888-ir.h"
+#include "cx23885-ir.h"
+#include "cx23885-av.h"
+#include "cx23885-input.h"
+
+MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CX23885_VERSION);
+
+/*
+ * Some platforms have been found to require periodic resetting of the DMA
+ * engine. Ryzen and XEON platforms are known to be affected. The symptom
+ * encountered is "mpeg risc op code error". Only Ryzen platforms employ
+ * this workaround if the option equals 1. The workaround can be explicitly
+ * disabled for all platforms by setting to 0, the workaround can be forced
+ * on for any platform by setting to 2.
+ */
+static unsigned int dma_reset_workaround = 1;
+module_param(dma_reset_workaround, int, 0644);
+MODULE_PARM_DESC(dma_reset_workaround, "periodic RiSC dma engine reset; 0-force disable, 1-driver detect (default), 2-force enable");
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+static unsigned int card[]  = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+module_param_array(card,  int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (debug >= level)\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt), \
+		       __func__, ##arg); \
+	} while (0)
+
+static unsigned int cx23885_devcount;
+
+#define NO_SYNC_LINE (-1U)
+
+/* FIXME, these allocations will change when
+ * analog arrives. The be reviewed.
+ * CX23887 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ *                       15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+static struct sram_channel cx23885_sram_channels[] = {
+	[SRAM_CH01] = {
+		.name		= "VID A",
+		.cmds_start	= 0x10000,
+		.ctrl_start	= 0x10380,
+		.cdt		= 0x104c0,
+		.fifo_start	= 0x40,
+		.fifo_size	= 0x2800,
+		.ptr1_reg	= DMA1_PTR1,
+		.ptr2_reg	= DMA1_PTR2,
+		.cnt1_reg	= DMA1_CNT1,
+		.cnt2_reg	= DMA1_CNT2,
+	},
+	[SRAM_CH02] = {
+		.name		= "ch2",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA2_PTR1,
+		.ptr2_reg	= DMA2_PTR2,
+		.cnt1_reg	= DMA2_CNT1,
+		.cnt2_reg	= DMA2_CNT2,
+	},
+	[SRAM_CH03] = {
+		.name		= "TS1 B",
+		.cmds_start	= 0x100A0,
+		.ctrl_start	= 0x10400,
+		.cdt		= 0x10580,
+		.fifo_start	= 0x5000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA3_PTR1,
+		.ptr2_reg	= DMA3_PTR2,
+		.cnt1_reg	= DMA3_CNT1,
+		.cnt2_reg	= DMA3_CNT2,
+	},
+	[SRAM_CH04] = {
+		.name		= "ch4",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA4_PTR1,
+		.ptr2_reg	= DMA4_PTR2,
+		.cnt1_reg	= DMA4_CNT1,
+		.cnt2_reg	= DMA4_CNT2,
+	},
+	[SRAM_CH05] = {
+		.name		= "ch5",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH06] = {
+		.name		= "TS2 C",
+		.cmds_start	= 0x10140,
+		.ctrl_start	= 0x10440,
+		.cdt		= 0x105e0,
+		.fifo_start	= 0x6000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH07] = {
+		.name		= "TV Audio",
+		.cmds_start	= 0x10190,
+		.ctrl_start	= 0x10480,
+		.cdt		= 0x10a00,
+		.fifo_start	= 0x7000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA6_PTR1,
+		.ptr2_reg	= DMA6_PTR2,
+		.cnt1_reg	= DMA6_CNT1,
+		.cnt2_reg	= DMA6_CNT2,
+	},
+	[SRAM_CH08] = {
+		.name		= "ch8",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA7_PTR1,
+		.ptr2_reg	= DMA7_PTR2,
+		.cnt1_reg	= DMA7_CNT1,
+		.cnt2_reg	= DMA7_CNT2,
+	},
+	[SRAM_CH09] = {
+		.name		= "ch9",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA8_PTR1,
+		.ptr2_reg	= DMA8_PTR2,
+		.cnt1_reg	= DMA8_CNT1,
+		.cnt2_reg	= DMA8_CNT2,
+	},
+};
+
+static struct sram_channel cx23887_sram_channels[] = {
+	[SRAM_CH01] = {
+		.name		= "VID A",
+		.cmds_start	= 0x10000,
+		.ctrl_start	= 0x105b0,
+		.cdt		= 0x107b0,
+		.fifo_start	= 0x40,
+		.fifo_size	= 0x2800,
+		.ptr1_reg	= DMA1_PTR1,
+		.ptr2_reg	= DMA1_PTR2,
+		.cnt1_reg	= DMA1_CNT1,
+		.cnt2_reg	= DMA1_CNT2,
+	},
+	[SRAM_CH02] = {
+		.name		= "VID A (VBI)",
+		.cmds_start	= 0x10050,
+		.ctrl_start	= 0x105F0,
+		.cdt		= 0x10810,
+		.fifo_start	= 0x3000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA2_PTR1,
+		.ptr2_reg	= DMA2_PTR2,
+		.cnt1_reg	= DMA2_CNT1,
+		.cnt2_reg	= DMA2_CNT2,
+	},
+	[SRAM_CH03] = {
+		.name		= "TS1 B",
+		.cmds_start	= 0x100A0,
+		.ctrl_start	= 0x10630,
+		.cdt		= 0x10870,
+		.fifo_start	= 0x5000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA3_PTR1,
+		.ptr2_reg	= DMA3_PTR2,
+		.cnt1_reg	= DMA3_CNT1,
+		.cnt2_reg	= DMA3_CNT2,
+	},
+	[SRAM_CH04] = {
+		.name		= "ch4",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA4_PTR1,
+		.ptr2_reg	= DMA4_PTR2,
+		.cnt1_reg	= DMA4_CNT1,
+		.cnt2_reg	= DMA4_CNT2,
+	},
+	[SRAM_CH05] = {
+		.name		= "ch5",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH06] = {
+		.name		= "TS2 C",
+		.cmds_start	= 0x10140,
+		.ctrl_start	= 0x10670,
+		.cdt		= 0x108d0,
+		.fifo_start	= 0x6000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH07] = {
+		.name		= "TV Audio",
+		.cmds_start	= 0x10190,
+		.ctrl_start	= 0x106B0,
+		.cdt		= 0x10930,
+		.fifo_start	= 0x7000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA6_PTR1,
+		.ptr2_reg	= DMA6_PTR2,
+		.cnt1_reg	= DMA6_CNT1,
+		.cnt2_reg	= DMA6_CNT2,
+	},
+	[SRAM_CH08] = {
+		.name		= "ch8",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA7_PTR1,
+		.ptr2_reg	= DMA7_PTR2,
+		.cnt1_reg	= DMA7_CNT1,
+		.cnt2_reg	= DMA7_CNT2,
+	},
+	[SRAM_CH09] = {
+		.name		= "ch9",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA8_PTR1,
+		.ptr2_reg	= DMA8_PTR2,
+		.cnt1_reg	= DMA8_CNT1,
+		.cnt2_reg	= DMA8_CNT2,
+	},
+};
+
+static void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+	cx_set(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = mask & dev->pci_irqmask;
+	if (v)
+		cx_set(PCI_INT_MSK, v);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_enable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_enable(dev, 0xffffffff);
+}
+
+void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_disable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_disable(dev, 0xffffffff);
+}
+
+void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask &= ~mask;
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static u32 cx23885_irq_get_mask(struct cx23885_dev *dev)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = cx_read(PCI_INT_MSK);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+	return v;
+}
+
+static int cx23885_risc_decode(u32 risc)
+{
+	static char *instr[16] = {
+		[RISC_SYNC    >> 28] = "sync",
+		[RISC_WRITE   >> 28] = "write",
+		[RISC_WRITEC  >> 28] = "writec",
+		[RISC_READ    >> 28] = "read",
+		[RISC_READC   >> 28] = "readc",
+		[RISC_JUMP    >> 28] = "jump",
+		[RISC_SKIP    >> 28] = "skip",
+		[RISC_WRITERM >> 28] = "writerm",
+		[RISC_WRITECM >> 28] = "writecm",
+		[RISC_WRITECR >> 28] = "writecr",
+	};
+	static int incr[16] = {
+		[RISC_WRITE   >> 28] = 3,
+		[RISC_JUMP    >> 28] = 3,
+		[RISC_SKIP    >> 28] = 1,
+		[RISC_SYNC    >> 28] = 1,
+		[RISC_WRITERM >> 28] = 3,
+		[RISC_WRITECM >> 28] = 3,
+		[RISC_WRITECR >> 28] = 4,
+	};
+	static char *bits[] = {
+		"12",   "13",   "14",   "resync",
+		"cnt0", "cnt1", "18",   "19",
+		"20",   "21",   "22",   "23",
+		"irq1", "irq2", "eol",  "sol",
+	};
+	int i;
+
+	printk(KERN_DEBUG "0x%08x [ %s", risc,
+	       instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+	for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--)
+		if (risc & (1 << (i + 12)))
+			pr_cont(" %s", bits[i]);
+	pr_cont(" count=%d ]\n", risc & 0xfff);
+	return incr[risc >> 28] ? incr[risc >> 28] : 1;
+}
+
+static void cx23885_wakeup(struct cx23885_tsport *port,
+			   struct cx23885_dmaqueue *q, u32 count)
+{
+	struct cx23885_buffer *buf;
+	int count_delta;
+	int max_buf_done = 5; /* service maximum five buffers */
+
+	do {
+		if (list_empty(&q->active))
+			return;
+		buf = list_entry(q->active.next,
+				 struct cx23885_buffer, queue);
+
+		buf->vb.vb2_buf.timestamp = ktime_get_ns();
+		buf->vb.sequence = q->count++;
+		if (count != (q->count % 65536)) {
+			dprintk(1, "[%p/%d] wakeup reg=%d buf=%d\n", buf,
+				buf->vb.vb2_buf.index, count, q->count);
+		} else {
+			dprintk(7, "[%p/%d] wakeup reg=%d buf=%d\n", buf,
+				buf->vb.vb2_buf.index, count, q->count);
+		}
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+		max_buf_done--;
+		/* count register is 16 bits so apply modulo appropriately */
+		count_delta = ((int)count - (int)(q->count % 65536));
+	} while ((count_delta > 0) && (max_buf_done > 0));
+}
+
+int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+				      struct sram_channel *ch,
+				      unsigned int bpl, u32 risc)
+{
+	unsigned int i, lines;
+	u32 cdt;
+
+	if (ch->cmds_start == 0) {
+		dprintk(1, "%s() Erasing channel [%s]\n", __func__,
+			ch->name);
+		cx_write(ch->ptr1_reg, 0);
+		cx_write(ch->ptr2_reg, 0);
+		cx_write(ch->cnt2_reg, 0);
+		cx_write(ch->cnt1_reg, 0);
+		return 0;
+	} else {
+		dprintk(1, "%s() Configuring channel [%s]\n", __func__,
+			ch->name);
+	}
+
+	bpl   = (bpl + 7) & ~7; /* alignment */
+	cdt   = ch->cdt;
+	lines = ch->fifo_size / bpl;
+	if (lines > 6)
+		lines = 6;
+	BUG_ON(lines < 2);
+
+	cx_write(8 + 0, RISC_JUMP | RISC_CNT_RESET);
+	cx_write(8 + 4, 12);
+	cx_write(8 + 8, 0);
+
+	/* write CDT */
+	for (i = 0; i < lines; i++) {
+		dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i,
+			ch->fifo_start + bpl*i);
+		cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
+		cx_write(cdt + 16*i +  4, 0);
+		cx_write(cdt + 16*i +  8, 0);
+		cx_write(cdt + 16*i + 12, 0);
+	}
+
+	/* write CMDS */
+	if (ch->jumponly)
+		cx_write(ch->cmds_start + 0, 8);
+	else
+		cx_write(ch->cmds_start + 0, risc);
+	cx_write(ch->cmds_start +  4, 0); /* 64 bits 63-32 */
+	cx_write(ch->cmds_start +  8, cdt);
+	cx_write(ch->cmds_start + 12, (lines*16) >> 3);
+	cx_write(ch->cmds_start + 16, ch->ctrl_start);
+	if (ch->jumponly)
+		cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2));
+	else
+		cx_write(ch->cmds_start + 20, 64 >> 2);
+	for (i = 24; i < 80; i += 4)
+		cx_write(ch->cmds_start + i, 0);
+
+	/* fill registers */
+	cx_write(ch->ptr1_reg, ch->fifo_start);
+	cx_write(ch->ptr2_reg, cdt);
+	cx_write(ch->cnt2_reg, (lines*16) >> 3);
+	cx_write(ch->cnt1_reg, (bpl >> 3) - 1);
+
+	dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n",
+		dev->bridge,
+		ch->name,
+		bpl,
+		lines);
+
+	return 0;
+}
+
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+				      struct sram_channel *ch)
+{
+	static char *name[] = {
+		"init risc lo",
+		"init risc hi",
+		"cdt base",
+		"cdt size",
+		"iq base",
+		"iq size",
+		"risc pc lo",
+		"risc pc hi",
+		"iq wr ptr",
+		"iq rd ptr",
+		"cdt current",
+		"pci target lo",
+		"pci target hi",
+		"line / byte",
+	};
+	u32 risc;
+	unsigned int i, j, n;
+
+	pr_warn("%s: %s - dma channel status dump\n",
+		dev->name, ch->name);
+	for (i = 0; i < ARRAY_SIZE(name); i++)
+		pr_warn("%s:   cmds: %-15s: 0x%08x\n",
+			dev->name, name[i],
+			cx_read(ch->cmds_start + 4*i));
+
+	for (i = 0; i < 4; i++) {
+		risc = cx_read(ch->cmds_start + 4 * (i + 14));
+		pr_warn("%s:   risc%d:", dev->name, i);
+		cx23885_risc_decode(risc);
+	}
+	for (i = 0; i < (64 >> 2); i += n) {
+		risc = cx_read(ch->ctrl_start + 4 * i);
+		/* No consideration for bits 63-32 */
+
+		pr_warn("%s:   (0x%08x) iq %x:", dev->name,
+			ch->ctrl_start + 4 * i, i);
+		n = cx23885_risc_decode(risc);
+		for (j = 1; j < n; j++) {
+			risc = cx_read(ch->ctrl_start + 4 * (i + j));
+			pr_warn("%s:   iq %x: 0x%08x [ arg #%d ]\n",
+				dev->name, i+j, risc, j);
+		}
+	}
+
+	pr_warn("%s: fifo: 0x%08x -> 0x%x\n",
+		dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
+	pr_warn("%s: ctrl: 0x%08x -> 0x%x\n",
+		dev->name, ch->ctrl_start, ch->ctrl_start + 6*16);
+	pr_warn("%s:   ptr1_reg: 0x%08x\n",
+		dev->name, cx_read(ch->ptr1_reg));
+	pr_warn("%s:   ptr2_reg: 0x%08x\n",
+		dev->name, cx_read(ch->ptr2_reg));
+	pr_warn("%s:   cnt1_reg: 0x%08x\n",
+		dev->name, cx_read(ch->cnt1_reg));
+	pr_warn("%s:   cnt2_reg: 0x%08x\n",
+		dev->name, cx_read(ch->cnt2_reg));
+}
+
+static void cx23885_risc_disasm(struct cx23885_tsport *port,
+				struct cx23885_riscmem *risc)
+{
+	struct cx23885_dev *dev = port->dev;
+	unsigned int i, j, n;
+
+	pr_info("%s: risc disasm: %p [dma=0x%08lx]\n",
+	       dev->name, risc->cpu, (unsigned long)risc->dma);
+	for (i = 0; i < (risc->size >> 2); i += n) {
+		pr_info("%s:   %04d:", dev->name, i);
+		n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i]));
+		for (j = 1; j < n; j++)
+			pr_info("%s:   %04d: 0x%08x [ arg #%d ]\n",
+				dev->name, i + j, risc->cpu[i + j], j);
+		if (risc->cpu[i] == cpu_to_le32(RISC_JUMP))
+			break;
+	}
+}
+
+static void cx23885_clear_bridge_error(struct cx23885_dev *dev)
+{
+	uint32_t reg1_val, reg2_val;
+
+	if (!dev->need_dma_reset)
+		return;
+
+	reg1_val = cx_read(TC_REQ); /* read-only */
+	reg2_val = cx_read(TC_REQ_SET);
+
+	if (reg1_val && reg2_val) {
+		cx_write(TC_REQ, reg1_val);
+		cx_write(TC_REQ_SET, reg2_val);
+		cx_read(VID_B_DMA);
+		cx_read(VBI_B_DMA);
+		cx_read(VID_C_DMA);
+		cx_read(VBI_C_DMA);
+
+		dev_info(&dev->pci->dev,
+			"dma in progress detected 0x%08x 0x%08x, clearing\n",
+			reg1_val, reg2_val);
+	}
+}
+
+static void cx23885_shutdown(struct cx23885_dev *dev)
+{
+	/* disable RISC controller */
+	cx_write(DEV_CNTRL2, 0);
+
+	/* Disable all IR activity */
+	cx_write(IR_CNTRL_REG, 0);
+
+	/* Disable Video A/B activity */
+	cx_write(VID_A_DMA_CTL, 0);
+	cx_write(VID_B_DMA_CTL, 0);
+	cx_write(VID_C_DMA_CTL, 0);
+
+	/* Disable Audio activity */
+	cx_write(AUD_INT_DMA_CTL, 0);
+	cx_write(AUD_EXT_DMA_CTL, 0);
+
+	/* Disable Serial port */
+	cx_write(UART_CTL, 0);
+
+	/* Disable Interrupts */
+	cx23885_irq_disable_all(dev);
+	cx_write(VID_A_INT_MSK, 0);
+	cx_write(VID_B_INT_MSK, 0);
+	cx_write(VID_C_INT_MSK, 0);
+	cx_write(AUDIO_INT_INT_MSK, 0);
+	cx_write(AUDIO_EXT_INT_MSK, 0);
+
+}
+
+static void cx23885_reset(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	cx23885_shutdown(dev);
+
+	cx_write(PCI_INT_STAT, 0xffffffff);
+	cx_write(VID_A_INT_STAT, 0xffffffff);
+	cx_write(VID_B_INT_STAT, 0xffffffff);
+	cx_write(VID_C_INT_STAT, 0xffffffff);
+	cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
+	cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
+	cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+	cx_write(PAD_CTRL, 0x00500300);
+
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+	msleep(100);
+
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
+		720*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03],
+		188*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06],
+		188*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0);
+
+	cx23885_gpio_setup(dev);
+
+	cx23885_irq_get_mask(dev);
+
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+}
+
+
+static int cx23885_pci_quirks(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* The cx23885 bridge has a weird bug which causes NMI to be asserted
+	 * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not
+	 * occur on the cx23887 bridge.
+	 */
+	if (dev->bridge == CX23885_BRIDGE_885)
+		cx_clear(RDR_TLCTL0, 1 << 4);
+
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+	return 0;
+}
+
+static int get_resources(struct cx23885_dev *dev)
+{
+	if (request_mem_region(pci_resource_start(dev->pci, 0),
+			       pci_resource_len(dev->pci, 0),
+			       dev->name))
+		return 0;
+
+	pr_err("%s: can't get MMIO memory @ 0x%llx\n",
+	       dev->name, (unsigned long long)pci_resource_start(dev->pci, 0));
+
+	return -EBUSY;
+}
+
+static int cx23885_init_tsport(struct cx23885_dev *dev,
+	struct cx23885_tsport *port, int portno)
+{
+	dprintk(1, "%s(portno=%d)\n", __func__, portno);
+
+	/* Transport bus init dma queue  - Common settings */
+	port->dma_ctl_val        = 0x11; /* Enable RISC controller and Fifo */
+	port->ts_int_msk_val     = 0x1111; /* TS port bits for RISC */
+	port->vld_misc_val       = 0x0;
+	port->hw_sop_ctrl_val    = (0x47 << 16 | 188 << 4);
+
+	spin_lock_init(&port->slock);
+	port->dev = dev;
+	port->nr = portno;
+
+	INIT_LIST_HEAD(&port->mpegq.active);
+	mutex_init(&port->frontends.lock);
+	INIT_LIST_HEAD(&port->frontends.felist);
+	port->frontends.active_fe_id = 0;
+
+	/* This should be hardcoded allow a single frontend
+	 * attachment to this tsport, keeping the -dvb.c
+	 * code clean and safe.
+	 */
+	if (!port->num_frontends)
+		port->num_frontends = 1;
+
+	switch (portno) {
+	case 1:
+		port->reg_gpcnt          = VID_B_GPCNT;
+		port->reg_gpcnt_ctl      = VID_B_GPCNT_CTL;
+		port->reg_dma_ctl        = VID_B_DMA_CTL;
+		port->reg_lngth          = VID_B_LNGTH;
+		port->reg_hw_sop_ctrl    = VID_B_HW_SOP_CTL;
+		port->reg_gen_ctrl       = VID_B_GEN_CTL;
+		port->reg_bd_pkt_status  = VID_B_BD_PKT_STATUS;
+		port->reg_sop_status     = VID_B_SOP_STATUS;
+		port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT;
+		port->reg_vld_misc       = VID_B_VLD_MISC;
+		port->reg_ts_clk_en      = VID_B_TS_CLK_EN;
+		port->reg_src_sel        = VID_B_SRC_SEL;
+		port->reg_ts_int_msk     = VID_B_INT_MSK;
+		port->reg_ts_int_stat    = VID_B_INT_STAT;
+		port->sram_chno          = SRAM_CH03; /* VID_B */
+		port->pci_irqmask        = 0x02; /* VID_B bit1 */
+		break;
+	case 2:
+		port->reg_gpcnt          = VID_C_GPCNT;
+		port->reg_gpcnt_ctl      = VID_C_GPCNT_CTL;
+		port->reg_dma_ctl        = VID_C_DMA_CTL;
+		port->reg_lngth          = VID_C_LNGTH;
+		port->reg_hw_sop_ctrl    = VID_C_HW_SOP_CTL;
+		port->reg_gen_ctrl       = VID_C_GEN_CTL;
+		port->reg_bd_pkt_status  = VID_C_BD_PKT_STATUS;
+		port->reg_sop_status     = VID_C_SOP_STATUS;
+		port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT;
+		port->reg_vld_misc       = VID_C_VLD_MISC;
+		port->reg_ts_clk_en      = VID_C_TS_CLK_EN;
+		port->reg_src_sel        = 0;
+		port->reg_ts_int_msk     = VID_C_INT_MSK;
+		port->reg_ts_int_stat    = VID_C_INT_STAT;
+		port->sram_chno          = SRAM_CH06; /* VID_C */
+		port->pci_irqmask        = 0x04; /* VID_C bit2 */
+		break;
+	default:
+		BUG();
+	}
+
+	return 0;
+}
+
+static void cx23885_dev_checkrevision(struct cx23885_dev *dev)
+{
+	switch (cx_read(RDR_CFG2) & 0xff) {
+	case 0x00:
+		/* cx23885 */
+		dev->hwrevision = 0xa0;
+		break;
+	case 0x01:
+		/* CX23885-12Z */
+		dev->hwrevision = 0xa1;
+		break;
+	case 0x02:
+		/* CX23885-13Z/14Z */
+		dev->hwrevision = 0xb0;
+		break;
+	case 0x03:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-21Z/22Z */
+			dev->hwrevision = 0xc0;
+		} else {
+			/* CX23885-14Z */
+			dev->hwrevision = 0xa4;
+		}
+		break;
+	case 0x04:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-31Z */
+			dev->hwrevision = 0xd0;
+		} else {
+			/* CX23885-15Z, CX23888-31Z */
+			dev->hwrevision = 0xa5;
+		}
+		break;
+	case 0x0e:
+		/* CX23887-15Z */
+		dev->hwrevision = 0xc0;
+		break;
+	case 0x0f:
+		/* CX23887-14Z */
+		dev->hwrevision = 0xb1;
+		break;
+	default:
+		pr_err("%s() New hardware revision found 0x%x\n",
+		       __func__, dev->hwrevision);
+	}
+	if (dev->hwrevision)
+		pr_info("%s() Hardware revision = 0x%02x\n",
+			__func__, dev->hwrevision);
+	else
+		pr_err("%s() Hardware revision unknown 0x%x\n",
+		       __func__, dev->hwrevision);
+}
+
+/* Find the first v4l2_subdev member of the group id in hw */
+struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw)
+{
+	struct v4l2_subdev *result = NULL;
+	struct v4l2_subdev *sd;
+
+	spin_lock(&dev->v4l2_dev.lock);
+	v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) {
+		if (sd->grp_id == hw) {
+			result = sd;
+			break;
+		}
+	}
+	spin_unlock(&dev->v4l2_dev.lock);
+	return result;
+}
+
+static int cx23885_dev_setup(struct cx23885_dev *dev)
+{
+	int i;
+
+	spin_lock_init(&dev->pci_irqmask_lock);
+	spin_lock_init(&dev->slock);
+
+	mutex_init(&dev->lock);
+	mutex_init(&dev->gpio_lock);
+
+	atomic_inc(&dev->refcount);
+
+	dev->nr = cx23885_devcount++;
+	sprintf(dev->name, "cx23885[%d]", dev->nr);
+
+	/* Configure the internal memory */
+	if (dev->pci->device == 0x8880) {
+		/* Could be 887 or 888, assume an 888 default */
+		dev->bridge = CX23885_BRIDGE_888;
+		/* Apply a sensible clock frequency for the PCIe bridge */
+		dev->clk_freq = 50000000;
+		dev->sram_channels = cx23887_sram_channels;
+	} else
+	if (dev->pci->device == 0x8852) {
+		dev->bridge = CX23885_BRIDGE_885;
+		/* Apply a sensible clock frequency for the PCIe bridge */
+		dev->clk_freq = 28000000;
+		dev->sram_channels = cx23885_sram_channels;
+	} else
+		BUG();
+
+	dprintk(1, "%s() Memory configured for PCIe bridge type %d\n",
+		__func__, dev->bridge);
+
+	/* board config */
+	dev->board = UNSET;
+	if (card[dev->nr] < cx23885_bcount)
+		dev->board = card[dev->nr];
+	for (i = 0; UNSET == dev->board  &&  i < cx23885_idcount; i++)
+		if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor &&
+		    dev->pci->subsystem_device == cx23885_subids[i].subdevice)
+			dev->board = cx23885_subids[i].card;
+	if (UNSET == dev->board) {
+		dev->board = CX23885_BOARD_UNKNOWN;
+		cx23885_card_list(dev);
+	}
+
+	if (dev->pci->device == 0x8852) {
+		/* no DIF on cx23885, so no analog tuner support possible */
+		if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885;
+		else if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885;
+	}
+
+	/* If the user specific a clk freq override, apply it */
+	if (cx23885_boards[dev->board].clk_freq > 0)
+		dev->clk_freq = cx23885_boards[dev->board].clk_freq;
+
+	if (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE &&
+		dev->pci->subsystem_device == 0x7137) {
+		/* Hauppauge ImpactVCBe device ID 0x7137 is populated
+		 * with an 888, and a 25Mhz crystal, instead of the
+		 * usual third overtone 50Mhz. The default clock rate must
+		 * be overridden so the cx25840 is properly configured
+		 */
+		dev->clk_freq = 25000000;
+	}
+
+	dev->pci_bus  = dev->pci->bus->number;
+	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
+	cx23885_irq_add(dev, 0x001f00);
+
+	/* External Master 1 Bus */
+	dev->i2c_bus[0].nr = 0;
+	dev->i2c_bus[0].dev = dev;
+	dev->i2c_bus[0].reg_stat  = I2C1_STAT;
+	dev->i2c_bus[0].reg_ctrl  = I2C1_CTRL;
+	dev->i2c_bus[0].reg_addr  = I2C1_ADDR;
+	dev->i2c_bus[0].reg_rdata = I2C1_RDATA;
+	dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
+	dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
+
+	/* External Master 2 Bus */
+	dev->i2c_bus[1].nr = 1;
+	dev->i2c_bus[1].dev = dev;
+	dev->i2c_bus[1].reg_stat  = I2C2_STAT;
+	dev->i2c_bus[1].reg_ctrl  = I2C2_CTRL;
+	dev->i2c_bus[1].reg_addr  = I2C2_ADDR;
+	dev->i2c_bus[1].reg_rdata = I2C2_RDATA;
+	dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
+	dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
+
+	/* Internal Master 3 Bus */
+	dev->i2c_bus[2].nr = 2;
+	dev->i2c_bus[2].dev = dev;
+	dev->i2c_bus[2].reg_stat  = I2C3_STAT;
+	dev->i2c_bus[2].reg_ctrl  = I2C3_CTRL;
+	dev->i2c_bus[2].reg_addr  = I2C3_ADDR;
+	dev->i2c_bus[2].reg_rdata = I2C3_RDATA;
+	dev->i2c_bus[2].reg_wdata = I2C3_WDATA;
+	dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */
+
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) ||
+		(cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER))
+		cx23885_init_tsport(dev, &dev->ts1, 1);
+
+	if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+		cx23885_init_tsport(dev, &dev->ts2, 2);
+
+	if (get_resources(dev) < 0) {
+		pr_err("CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
+		       dev->name, dev->pci->subsystem_vendor,
+		       dev->pci->subsystem_device);
+
+		cx23885_devcount--;
+		return -ENODEV;
+	}
+
+	/* PCIe stuff */
+	dev->lmmio = ioremap(pci_resource_start(dev->pci, 0),
+			     pci_resource_len(dev->pci, 0));
+
+	dev->bmmio = (u8 __iomem *)dev->lmmio;
+
+	pr_info("CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+		dev->name, dev->pci->subsystem_vendor,
+		dev->pci->subsystem_device, cx23885_boards[dev->board].name,
+		dev->board, card[dev->nr] == dev->board ?
+		"insmod option" : "autodetected");
+
+	cx23885_pci_quirks(dev);
+
+	/* Assume some sensible defaults */
+	dev->tuner_type = cx23885_boards[dev->board].tuner_type;
+	dev->tuner_addr = cx23885_boards[dev->board].tuner_addr;
+	dev->tuner_bus = cx23885_boards[dev->board].tuner_bus;
+	dev->radio_type = cx23885_boards[dev->board].radio_type;
+	dev->radio_addr = cx23885_boards[dev->board].radio_addr;
+
+	dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n",
+		__func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus);
+	dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
+		__func__, dev->radio_type, dev->radio_addr);
+
+	/* The cx23417 encoder has GPIO's that need to be initialised
+	 * before DVB, so that demodulators and tuners are out of
+	 * reset before DVB uses them.
+	 */
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+			cx23885_mc417_init(dev);
+
+	/* init hardware */
+	cx23885_reset(dev);
+
+	cx23885_i2c_register(&dev->i2c_bus[0]);
+	cx23885_i2c_register(&dev->i2c_bus[1]);
+	cx23885_i2c_register(&dev->i2c_bus[2]);
+	cx23885_card_setup(dev);
+	call_all(dev, tuner, standby);
+	cx23885_ir_init(dev);
+
+	if (dev->board == CX23885_BOARD_VIEWCAST_460E) {
+		/*
+		 * GPIOs 9/8 are input detection bits for the breakout video
+		 * (gpio 8) and audio (gpio 9) cables. When they're attached,
+		 * this gpios are pulled high. Make sure these GPIOs are marked
+		 * as inputs.
+		 */
+		cx23885_gpio_enable(dev, 0x300, 0);
+	}
+
+	if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
+		if (cx23885_video_register(dev) < 0) {
+			pr_err("%s() Failed to register analog video adapters on VID_A\n",
+			       __func__);
+		}
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+		if (cx23885_boards[dev->board].num_fds_portb)
+			dev->ts1.num_frontends =
+				cx23885_boards[dev->board].num_fds_portb;
+		if (cx23885_dvb_register(&dev->ts1) < 0) {
+			pr_err("%s() Failed to register dvb adapters on VID_B\n",
+			       __func__);
+		}
+	} else
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+		if (cx23885_417_register(dev) < 0) {
+			pr_err("%s() Failed to register 417 on VID_B\n",
+			       __func__);
+		}
+	}
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+		if (cx23885_boards[dev->board].num_fds_portc)
+			dev->ts2.num_frontends =
+				cx23885_boards[dev->board].num_fds_portc;
+		if (cx23885_dvb_register(&dev->ts2) < 0) {
+			pr_err("%s() Failed to register dvb on VID_C\n",
+			       __func__);
+		}
+	} else
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) {
+		if (cx23885_417_register(dev) < 0) {
+			pr_err("%s() Failed to register 417 on VID_C\n",
+			       __func__);
+		}
+	}
+
+	cx23885_dev_checkrevision(dev);
+
+	/* disable MSI for NetUP cards, otherwise CI is not working */
+	if (cx23885_boards[dev->board].ci_type > 0)
+		cx_clear(RDR_RDRCTL1, 1 << 8);
+
+	switch (dev->board) {
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TEVII_S471:
+		cx_clear(RDR_RDRCTL1, 1 << 8);
+		break;
+	}
+
+	return 0;
+}
+
+static void cx23885_dev_unregister(struct cx23885_dev *dev)
+{
+	release_mem_region(pci_resource_start(dev->pci, 0),
+			   pci_resource_len(dev->pci, 0));
+
+	if (!atomic_dec_and_test(&dev->refcount))
+		return;
+
+	if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO)
+		cx23885_video_unregister(dev);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+		cx23885_dvb_unregister(&dev->ts1);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_417_unregister(dev);
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+		cx23885_dvb_unregister(&dev->ts2);
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)
+		cx23885_417_unregister(dev);
+
+	cx23885_i2c_unregister(&dev->i2c_bus[2]);
+	cx23885_i2c_unregister(&dev->i2c_bus[1]);
+	cx23885_i2c_unregister(&dev->i2c_bus[0]);
+
+	iounmap(dev->lmmio);
+}
+
+static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
+			       unsigned int offset, u32 sync_line,
+			       unsigned int bpl, unsigned int padding,
+			       unsigned int lines,  unsigned int lpi, bool jump)
+{
+	struct scatterlist *sg;
+	unsigned int line, todo, sol;
+
+
+	if (jump) {
+		*(rp++) = cpu_to_le32(RISC_JUMP);
+		*(rp++) = cpu_to_le32(0);
+		*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+	}
+
+	/* sync instruction */
+	if (sync_line != NO_SYNC_LINE)
+		*(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
+
+	/* scan lines */
+	sg = sglist;
+	for (line = 0; line < lines; line++) {
+		while (offset && offset >= sg_dma_len(sg)) {
+			offset -= sg_dma_len(sg);
+			sg = sg_next(sg);
+		}
+
+		if (lpi && line > 0 && !(line % lpi))
+			sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
+		else
+			sol = RISC_SOL;
+
+		if (bpl <= sg_dma_len(sg)-offset) {
+			/* fits into current chunk */
+			*(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			offset += bpl;
+		} else {
+			/* scanline needs to be split */
+			todo = bpl;
+			*(rp++) = cpu_to_le32(RISC_WRITE|sol|
+					    (sg_dma_len(sg)-offset));
+			*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			todo -= (sg_dma_len(sg)-offset);
+			offset = 0;
+			sg = sg_next(sg);
+			while (todo > sg_dma_len(sg)) {
+				*(rp++) = cpu_to_le32(RISC_WRITE|
+						    sg_dma_len(sg));
+				*(rp++) = cpu_to_le32(sg_dma_address(sg));
+				*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+				todo -= sg_dma_len(sg);
+				sg = sg_next(sg);
+			}
+			*(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg));
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			offset += todo;
+		}
+		offset += padding;
+	}
+
+	return rp;
+}
+
+int cx23885_risc_buffer(struct pci_dev *pci, struct cx23885_riscmem *risc,
+			struct scatterlist *sglist, unsigned int top_offset,
+			unsigned int bottom_offset, unsigned int bpl,
+			unsigned int padding, unsigned int lines)
+{
+	u32 instructions, fields;
+	__le32 *rp;
+
+	fields = 0;
+	if (UNSET != top_offset)
+		fields++;
+	if (UNSET != bottom_offset)
+		fields++;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	/* write and jump need and extra dword */
+	instructions  = fields * (1 + ((bpl + padding) * lines)
+		/ PAGE_SIZE + lines);
+	instructions += 5;
+	risc->size = instructions * 12;
+	risc->cpu = dma_alloc_coherent(&pci->dev, risc->size, &risc->dma,
+				       GFP_KERNEL);
+	if (risc->cpu == NULL)
+		return -ENOMEM;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	if (UNSET != top_offset)
+		rp = cx23885_risc_field(rp, sglist, top_offset, 0,
+					bpl, padding, lines, 0, true);
+	if (UNSET != bottom_offset)
+		rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
+					bpl, padding, lines, 0, UNSET == top_offset);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+int cx23885_risc_databuffer(struct pci_dev *pci,
+				   struct cx23885_riscmem *risc,
+				   struct scatterlist *sglist,
+				   unsigned int bpl,
+				   unsigned int lines, unsigned int lpi)
+{
+	u32 instructions;
+	__le32 *rp;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Here
+	   there is no padding and no sync.  First DMA region may be smaller
+	   than PAGE_SIZE */
+	/* Jump and write need an extra dword */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 4;
+
+	risc->size = instructions * 12;
+	risc->cpu = dma_alloc_coherent(&pci->dev, risc->size, &risc->dma,
+				       GFP_KERNEL);
+	if (risc->cpu == NULL)
+		return -ENOMEM;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE,
+				bpl, 0, lines, lpi, lpi == 0);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+int cx23885_risc_vbibuffer(struct pci_dev *pci, struct cx23885_riscmem *risc,
+			struct scatterlist *sglist, unsigned int top_offset,
+			unsigned int bottom_offset, unsigned int bpl,
+			unsigned int padding, unsigned int lines)
+{
+	u32 instructions, fields;
+	__le32 *rp;
+
+	fields = 0;
+	if (UNSET != top_offset)
+		fields++;
+	if (UNSET != bottom_offset)
+		fields++;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	/* write and jump need and extra dword */
+	instructions  = fields * (1 + ((bpl + padding) * lines)
+		/ PAGE_SIZE + lines);
+	instructions += 5;
+	risc->size = instructions * 12;
+	risc->cpu = dma_alloc_coherent(&pci->dev, risc->size, &risc->dma,
+				       GFP_KERNEL);
+	if (risc->cpu == NULL)
+		return -ENOMEM;
+	/* write risc instructions */
+	rp = risc->cpu;
+
+	/* Sync to line 6, so US CC line 21 will appear in line '12'
+	 * in the userland vbi payload */
+	if (UNSET != top_offset)
+		rp = cx23885_risc_field(rp, sglist, top_offset, 0,
+					bpl, padding, lines, 0, true);
+
+	if (UNSET != bottom_offset)
+		rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
+					bpl, padding, lines, 0, UNSET == top_offset);
+
+
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+
+void cx23885_free_buffer(struct cx23885_dev *dev, struct cx23885_buffer *buf)
+{
+	struct cx23885_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu, risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+
+	dprintk(1, "%s() Register Dump\n", __func__);
+	dprintk(1, "%s() DEV_CNTRL2               0x%08X\n", __func__,
+		cx_read(DEV_CNTRL2));
+	dprintk(1, "%s() PCI_INT_MSK              0x%08X\n", __func__,
+		cx23885_irq_get_mask(dev));
+	dprintk(1, "%s() AUD_INT_INT_MSK          0x%08X\n", __func__,
+		cx_read(AUDIO_INT_INT_MSK));
+	dprintk(1, "%s() AUD_INT_DMA_CTL          0x%08X\n", __func__,
+		cx_read(AUD_INT_DMA_CTL));
+	dprintk(1, "%s() AUD_EXT_INT_MSK          0x%08X\n", __func__,
+		cx_read(AUDIO_EXT_INT_MSK));
+	dprintk(1, "%s() AUD_EXT_DMA_CTL          0x%08X\n", __func__,
+		cx_read(AUD_EXT_DMA_CTL));
+	dprintk(1, "%s() PAD_CTRL                 0x%08X\n", __func__,
+		cx_read(PAD_CTRL));
+	dprintk(1, "%s() ALT_PIN_OUT_SEL          0x%08X\n", __func__,
+		cx_read(ALT_PIN_OUT_SEL));
+	dprintk(1, "%s() GPIO2                    0x%08X\n", __func__,
+		cx_read(GPIO2));
+	dprintk(1, "%s() gpcnt(0x%08X)          0x%08X\n", __func__,
+		port->reg_gpcnt, cx_read(port->reg_gpcnt));
+	dprintk(1, "%s() gpcnt_ctl(0x%08X)      0x%08x\n", __func__,
+		port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl));
+	dprintk(1, "%s() dma_ctl(0x%08X)        0x%08x\n", __func__,
+		port->reg_dma_ctl, cx_read(port->reg_dma_ctl));
+	if (port->reg_src_sel)
+		dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
+			port->reg_src_sel, cx_read(port->reg_src_sel));
+	dprintk(1, "%s() lngth(0x%08X)          0x%08x\n", __func__,
+		port->reg_lngth, cx_read(port->reg_lngth));
+	dprintk(1, "%s() hw_sop_ctrl(0x%08X)    0x%08x\n", __func__,
+		port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl));
+	dprintk(1, "%s() gen_ctrl(0x%08X)       0x%08x\n", __func__,
+		port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl));
+	dprintk(1, "%s() bd_pkt_status(0x%08X)  0x%08x\n", __func__,
+		port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status));
+	dprintk(1, "%s() sop_status(0x%08X)     0x%08x\n", __func__,
+		port->reg_sop_status, cx_read(port->reg_sop_status));
+	dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__,
+		port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat));
+	dprintk(1, "%s() vld_misc(0x%08X)       0x%08x\n", __func__,
+		port->reg_vld_misc, cx_read(port->reg_vld_misc));
+	dprintk(1, "%s() ts_clk_en(0x%08X)      0x%08x\n", __func__,
+		port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en));
+	dprintk(1, "%s() ts_int_msk(0x%08X)     0x%08x\n", __func__,
+		port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk));
+	dprintk(1, "%s() ts_int_status(0x%08X)  0x%08x\n", __func__,
+		port->reg_ts_int_stat, cx_read(port->reg_ts_int_stat));
+	dprintk(1, "%s() PCI_INT_STAT           0x%08X\n", __func__,
+		cx_read(PCI_INT_STAT));
+	dprintk(1, "%s() VID_B_INT_MSTAT        0x%08X\n", __func__,
+		cx_read(VID_B_INT_MSTAT));
+	dprintk(1, "%s() VID_B_INT_SSTAT        0x%08X\n", __func__,
+		cx_read(VID_B_INT_SSTAT));
+	dprintk(1, "%s() VID_C_INT_MSTAT        0x%08X\n", __func__,
+		cx_read(VID_C_INT_MSTAT));
+	dprintk(1, "%s() VID_C_INT_SSTAT        0x%08X\n", __func__,
+		cx_read(VID_C_INT_SSTAT));
+}
+
+int cx23885_start_dma(struct cx23885_tsport *port,
+			     struct cx23885_dmaqueue *q,
+			     struct cx23885_buffer   *buf)
+{
+	struct cx23885_dev *dev = port->dev;
+	u32 reg;
+
+	dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__,
+		dev->width, dev->height, dev->field);
+
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+
+	/* Stop the fifo and risc engine for this port */
+	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev,
+				   &dev->sram_channels[port->sram_chno],
+				   port->ts_packet_size, buf->risc.dma);
+	if (debug > 5) {
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+		cx23885_risc_disasm(port, &buf->risc);
+	}
+
+	/* write TS length to chip */
+	cx_write(port->reg_lngth, port->ts_packet_size);
+
+	if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) &&
+		(!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) {
+		pr_err("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n",
+			__func__,
+			cx23885_boards[dev->board].portb,
+			cx23885_boards[dev->board].portc);
+		return -EINVAL;
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 0);
+
+	udelay(100);
+
+	/* If the port supports SRC SELECT, configure it */
+	if (port->reg_src_sel)
+		cx_write(port->reg_src_sel, port->src_sel_val);
+
+	cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val);
+	cx_write(port->reg_ts_clk_en, port->ts_clk_en_val);
+	cx_write(port->reg_vld_misc, port->vld_misc_val);
+	cx_write(port->reg_gen_ctrl, port->gen_ctrl_val);
+	udelay(100);
+
+	/* NOTE: this is 2 (reserved) for portb, does it matter? */
+	/* reset counter to zero */
+	cx_write(port->reg_gpcnt_ctl, 3);
+	q->count = 0;
+
+	/* Set VIDB pins to input */
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	/* Set VIDC pins to input */
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x4; /* Clear TS2_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+
+		reg = cx_read(PAD_CTRL);
+		reg = reg & ~0x1;    /* Clear TS1_OE */
+
+		/* FIXME, bit 2 writing here is questionable */
+		/* set TS1_SOP_OE and TS1_OE_HI */
+		reg = reg | 0xa;
+		cx_write(PAD_CTRL, reg);
+
+		/* Sets MOE_CLK_DIS to disable MoE clock */
+		/* sets MCLK_DLY_SEL/BCLK_DLY_SEL to 1 buffer delay each */
+		cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011);
+
+		/* ALT_GPIO_ALT_SET: GPIO[0]
+		 * IR_ALT_TX_SEL: GPIO[1]
+		 * GPIO1_ALT_SEL: VIP_656_DATA[0]
+		 * GPIO0_ALT_SEL: VIP_656_CLK
+		 */
+		cx_write(ALT_PIN_OUT_SEL, 0x10100045);
+	}
+
+	switch (dev->bridge) {
+	case CX23885_BRIDGE_885:
+	case CX23885_BRIDGE_887:
+	case CX23885_BRIDGE_888:
+		/* enable irqs */
+		dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
+		/* clear dma in progress */
+		cx23885_clear_bridge_error(dev);
+		cx_set(port->reg_ts_int_msk,  port->ts_int_msk_val);
+		cx_set(port->reg_dma_ctl, port->dma_ctl_val);
+
+		/* clear dma in progress */
+		cx23885_clear_bridge_error(dev);
+		cx23885_irq_add(dev, port->pci_irqmask);
+		cx23885_irq_enable_all(dev);
+
+		/* clear dma in progress */
+		cx23885_clear_bridge_error(dev);
+		break;
+	default:
+		BUG();
+	}
+
+	cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 1);
+
+	if (debug > 4)
+		cx23885_tsport_reg_dump(port);
+
+	cx23885_irq_get_mask(dev);
+
+	/* clear dma in progress */
+	cx23885_clear_bridge_error(dev);
+
+	return 0;
+}
+
+static int cx23885_stop_dma(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	u32 reg;
+	int delay = 0;
+	uint32_t reg1_val;
+	uint32_t reg2_val;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Stop interrupts and DMA */
+	cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
+	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+	/* just in case wait for any dma to complete before allowing dealloc */
+	mdelay(20);
+	for (delay = 0; delay < 100; delay++) {
+		reg1_val = cx_read(TC_REQ);
+		reg2_val = cx_read(TC_REQ_SET);
+		if (reg1_val == 0 || reg2_val == 0)
+			break;
+		mdelay(1);
+	}
+	dev_dbg(&dev->pci->dev, "delay=%d reg1=0x%08x reg2=0x%08x\n",
+		delay, reg1_val, reg2_val);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+		reg = cx_read(PAD_CTRL);
+
+		/* Set TS1_OE */
+		reg = reg | 0x1;
+
+		/* clear TS1_SOP_OE and TS1_OE_HI */
+		reg = reg & ~0xa;
+		cx_write(PAD_CTRL, reg);
+		cx_write(port->reg_src_sel, 0);
+		cx_write(port->reg_gen_ctrl, 8);
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 0);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int cx23885_buf_prepare(struct cx23885_buffer *buf, struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	int size = port->ts_packet_size * port->ts_packet_count;
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0);
+
+	dprintk(1, "%s: %p\n", __func__, buf);
+	if (vb2_plane_size(&buf->vb.vb2_buf, 0) < size)
+		return -EINVAL;
+	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
+
+	cx23885_risc_databuffer(dev->pci, &buf->risc,
+				sgt->sgl,
+				port->ts_packet_size, port->ts_packet_count, 0);
+	return 0;
+}
+
+/*
+ * The risc program for each buffer works as follows: it starts with a simple
+ * 'JUMP to addr + 12', which is effectively a NOP. Then the code to DMA the
+ * buffer follows and at the end we have a JUMP back to the start + 12 (skipping
+ * the initial JUMP).
+ *
+ * This is the risc program of the first buffer to be queued if the active list
+ * is empty and it just keeps DMAing this buffer without generating any
+ * interrupts.
+ *
+ * If a new buffer is added then the initial JUMP in the code for that buffer
+ * will generate an interrupt which signals that the previous buffer has been
+ * DMAed successfully and that it can be returned to userspace.
+ *
+ * It also sets the final jump of the previous buffer to the start of the new
+ * buffer, thus chaining the new buffer into the DMA chain. This is a single
+ * atomic u32 write, so there is no race condition.
+ *
+ * The end-result of all this that you only get an interrupt when a buffer
+ * is ready, so the control flow is very easy.
+ */
+void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf)
+{
+	struct cx23885_buffer    *prev;
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_dmaqueue  *cx88q = &port->mpegq;
+	unsigned long flags;
+
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	spin_lock_irqsave(&dev->slock, flags);
+	if (list_empty(&cx88q->active)) {
+		list_add_tail(&buf->queue, &cx88q->active);
+		dprintk(1, "[%p/%d] %s - first active\n",
+			buf, buf->vb.vb2_buf.index, __func__);
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		prev = list_entry(cx88q->active.prev, struct cx23885_buffer,
+				  queue);
+		list_add_tail(&buf->queue, &cx88q->active);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(1, "[%p/%d] %s - append to active\n",
+			 buf, buf->vb.vb2_buf.index, __func__);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+/* ----------------------------------------------------------- */
+
+static void do_cancel_buffers(struct cx23885_tsport *port, char *reason)
+{
+	struct cx23885_dmaqueue *q = &port->mpegq;
+	struct cx23885_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->slock, flags);
+	while (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx23885_buffer,
+				 queue);
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+		dprintk(1, "[%p/%d] %s - dma=0x%08lx\n",
+			buf, buf->vb.vb2_buf.index, reason,
+			(unsigned long)buf->risc.dma);
+	}
+	spin_unlock_irqrestore(&port->slock, flags);
+}
+
+void cx23885_cancel_buffers(struct cx23885_tsport *port)
+{
+	dprintk(1, "%s()\n", __func__);
+	cx23885_stop_dma(port);
+	do_cancel_buffers(port, "cancel");
+}
+
+int cx23885_irq_417(struct cx23885_dev *dev, u32 status)
+{
+	/* FIXME: port1 assumption here. */
+	struct cx23885_tsport *port = &dev->ts1;
+	int count = 0;
+	int handled = 0;
+
+	if (status == 0)
+		return handled;
+
+	count = cx_read(port->reg_gpcnt);
+	dprintk(7, "status: 0x%08x  mask: 0x%08x count: 0x%x\n",
+		status, cx_read(port->reg_ts_int_msk), count);
+
+	if ((status & VID_B_MSK_BAD_PKT)         ||
+		(status & VID_B_MSK_OPC_ERR)     ||
+		(status & VID_B_MSK_VBI_OPC_ERR) ||
+		(status & VID_B_MSK_SYNC)        ||
+		(status & VID_B_MSK_VBI_SYNC)    ||
+		(status & VID_B_MSK_OF)          ||
+		(status & VID_B_MSK_VBI_OF)) {
+		pr_err("%s: V4L mpeg risc op code error, status = 0x%x\n",
+		       dev->name, status);
+		if (status & VID_B_MSK_BAD_PKT)
+			dprintk(1, "        VID_B_MSK_BAD_PKT\n");
+		if (status & VID_B_MSK_OPC_ERR)
+			dprintk(1, "        VID_B_MSK_OPC_ERR\n");
+		if (status & VID_B_MSK_VBI_OPC_ERR)
+			dprintk(1, "        VID_B_MSK_VBI_OPC_ERR\n");
+		if (status & VID_B_MSK_SYNC)
+			dprintk(1, "        VID_B_MSK_SYNC\n");
+		if (status & VID_B_MSK_VBI_SYNC)
+			dprintk(1, "        VID_B_MSK_VBI_SYNC\n");
+		if (status & VID_B_MSK_OF)
+			dprintk(1, "        VID_B_MSK_OF\n");
+		if (status & VID_B_MSK_VBI_OF)
+			dprintk(1, "        VID_B_MSK_VBI_OF\n");
+
+		cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+		cx23885_417_check_encoder(dev);
+	} else if (status & VID_B_MSK_RISCI1) {
+		dprintk(7, "        VID_B_MSK_RISCI1\n");
+		spin_lock(&port->slock);
+		cx23885_wakeup(port, &port->mpegq, count);
+		spin_unlock(&port->slock);
+	}
+	if (status) {
+		cx_write(port->reg_ts_int_stat, status);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status)
+{
+	struct cx23885_dev *dev = port->dev;
+	int handled = 0;
+	u32 count;
+
+	if ((status & VID_BC_MSK_OPC_ERR) ||
+		(status & VID_BC_MSK_BAD_PKT) ||
+		(status & VID_BC_MSK_SYNC) ||
+		(status & VID_BC_MSK_OF)) {
+
+		if (status & VID_BC_MSK_OPC_ERR)
+			dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
+				VID_BC_MSK_OPC_ERR);
+
+		if (status & VID_BC_MSK_BAD_PKT)
+			dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n",
+				VID_BC_MSK_BAD_PKT);
+
+		if (status & VID_BC_MSK_SYNC)
+			dprintk(7, " (VID_BC_MSK_SYNC    0x%08x)\n",
+				VID_BC_MSK_SYNC);
+
+		if (status & VID_BC_MSK_OF)
+			dprintk(7, " (VID_BC_MSK_OF      0x%08x)\n",
+				VID_BC_MSK_OF);
+
+		pr_err("%s: mpeg risc op code error\n", dev->name);
+
+		cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+
+	} else if (status & VID_BC_MSK_RISCI1) {
+
+		dprintk(7, " (RISCI1            0x%08x)\n", VID_BC_MSK_RISCI1);
+
+		spin_lock(&port->slock);
+		count = cx_read(port->reg_gpcnt);
+		cx23885_wakeup(port, &port->mpegq, count);
+		spin_unlock(&port->slock);
+
+	}
+	if (status) {
+		cx_write(port->reg_ts_int_stat, status);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+static irqreturn_t cx23885_irq(int irq, void *dev_id)
+{
+	struct cx23885_dev *dev = dev_id;
+	struct cx23885_tsport *ts1 = &dev->ts1;
+	struct cx23885_tsport *ts2 = &dev->ts2;
+	u32 pci_status, pci_mask;
+	u32 vida_status, vida_mask;
+	u32 audint_status, audint_mask;
+	u32 ts1_status, ts1_mask;
+	u32 ts2_status, ts2_mask;
+	int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
+	int audint_count = 0;
+	bool subdev_handled;
+
+	pci_status = cx_read(PCI_INT_STAT);
+	pci_mask = cx23885_irq_get_mask(dev);
+	if ((pci_status & pci_mask) == 0) {
+		dprintk(7, "pci_status: 0x%08x  pci_mask: 0x%08x\n",
+			pci_status, pci_mask);
+		goto out;
+	}
+
+	vida_status = cx_read(VID_A_INT_STAT);
+	vida_mask = cx_read(VID_A_INT_MSK);
+	audint_status = cx_read(AUDIO_INT_INT_STAT);
+	audint_mask = cx_read(AUDIO_INT_INT_MSK);
+	ts1_status = cx_read(VID_B_INT_STAT);
+	ts1_mask = cx_read(VID_B_INT_MSK);
+	ts2_status = cx_read(VID_C_INT_STAT);
+	ts2_mask = cx_read(VID_C_INT_MSK);
+
+	if (((pci_status & pci_mask) == 0) &&
+		((ts2_status & ts2_mask) == 0) &&
+		((ts1_status & ts1_mask) == 0))
+		goto out;
+
+	vida_count = cx_read(VID_A_GPCNT);
+	audint_count = cx_read(AUD_INT_A_GPCNT);
+	ts1_count = cx_read(ts1->reg_gpcnt);
+	ts2_count = cx_read(ts2->reg_gpcnt);
+	dprintk(7, "pci_status: 0x%08x  pci_mask: 0x%08x\n",
+		pci_status, pci_mask);
+	dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n",
+		vida_status, vida_mask, vida_count);
+	dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n",
+		audint_status, audint_mask, audint_count);
+	dprintk(7, "ts1_status: 0x%08x  ts1_mask: 0x%08x count: 0x%x\n",
+		ts1_status, ts1_mask, ts1_count);
+	dprintk(7, "ts2_status: 0x%08x  ts2_mask: 0x%08x count: 0x%x\n",
+		ts2_status, ts2_mask, ts2_count);
+
+	if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR |
+			  PCI_MSK_AL_RD   | PCI_MSK_AL_WR   | PCI_MSK_APB_DMA |
+			  PCI_MSK_VID_C   | PCI_MSK_VID_B   | PCI_MSK_VID_A   |
+			  PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
+			  PCI_MSK_GPIO0   | PCI_MSK_GPIO1   |
+			  PCI_MSK_AV_CORE | PCI_MSK_IR)) {
+
+		if (pci_status & PCI_MSK_RISC_RD)
+			dprintk(7, " (PCI_MSK_RISC_RD   0x%08x)\n",
+				PCI_MSK_RISC_RD);
+
+		if (pci_status & PCI_MSK_RISC_WR)
+			dprintk(7, " (PCI_MSK_RISC_WR   0x%08x)\n",
+				PCI_MSK_RISC_WR);
+
+		if (pci_status & PCI_MSK_AL_RD)
+			dprintk(7, " (PCI_MSK_AL_RD     0x%08x)\n",
+				PCI_MSK_AL_RD);
+
+		if (pci_status & PCI_MSK_AL_WR)
+			dprintk(7, " (PCI_MSK_AL_WR     0x%08x)\n",
+				PCI_MSK_AL_WR);
+
+		if (pci_status & PCI_MSK_APB_DMA)
+			dprintk(7, " (PCI_MSK_APB_DMA   0x%08x)\n",
+				PCI_MSK_APB_DMA);
+
+		if (pci_status & PCI_MSK_VID_C)
+			dprintk(7, " (PCI_MSK_VID_C     0x%08x)\n",
+				PCI_MSK_VID_C);
+
+		if (pci_status & PCI_MSK_VID_B)
+			dprintk(7, " (PCI_MSK_VID_B     0x%08x)\n",
+				PCI_MSK_VID_B);
+
+		if (pci_status & PCI_MSK_VID_A)
+			dprintk(7, " (PCI_MSK_VID_A     0x%08x)\n",
+				PCI_MSK_VID_A);
+
+		if (pci_status & PCI_MSK_AUD_INT)
+			dprintk(7, " (PCI_MSK_AUD_INT   0x%08x)\n",
+				PCI_MSK_AUD_INT);
+
+		if (pci_status & PCI_MSK_AUD_EXT)
+			dprintk(7, " (PCI_MSK_AUD_EXT   0x%08x)\n",
+				PCI_MSK_AUD_EXT);
+
+		if (pci_status & PCI_MSK_GPIO0)
+			dprintk(7, " (PCI_MSK_GPIO0     0x%08x)\n",
+				PCI_MSK_GPIO0);
+
+		if (pci_status & PCI_MSK_GPIO1)
+			dprintk(7, " (PCI_MSK_GPIO1     0x%08x)\n",
+				PCI_MSK_GPIO1);
+
+		if (pci_status & PCI_MSK_AV_CORE)
+			dprintk(7, " (PCI_MSK_AV_CORE   0x%08x)\n",
+				PCI_MSK_AV_CORE);
+
+		if (pci_status & PCI_MSK_IR)
+			dprintk(7, " (PCI_MSK_IR        0x%08x)\n",
+				PCI_MSK_IR);
+	}
+
+	if (cx23885_boards[dev->board].ci_type == 1 &&
+			(pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0)))
+		handled += netup_ci_slot_status(dev, pci_status);
+
+	if (cx23885_boards[dev->board].ci_type == 2 &&
+			(pci_status & PCI_MSK_GPIO0))
+		handled += altera_ci_irq(dev);
+
+	if (ts1_status) {
+		if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+			handled += cx23885_irq_ts(ts1, ts1_status);
+		else
+		if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+			handled += cx23885_irq_417(dev, ts1_status);
+	}
+
+	if (ts2_status) {
+		if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+			handled += cx23885_irq_ts(ts2, ts2_status);
+		else
+		if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)
+			handled += cx23885_irq_417(dev, ts2_status);
+	}
+
+	if (vida_status)
+		handled += cx23885_video_irq(dev, vida_status);
+
+	if (audint_status)
+		handled += cx23885_audio_irq(dev, audint_status, audint_mask);
+
+	if (pci_status & PCI_MSK_IR) {
+		subdev_handled = false;
+		v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
+				 pci_status, &subdev_handled);
+		if (subdev_handled)
+			handled++;
+	}
+
+	if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
+		cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
+		schedule_work(&dev->cx25840_work);
+		handled++;
+	}
+
+	if (handled)
+		cx_write(PCI_INT_STAT, pci_status & pci_mask);
+out:
+	return IRQ_RETVAL(handled);
+}
+
+static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
+				    unsigned int notification, void *arg)
+{
+	struct cx23885_dev *dev;
+
+	if (sd == NULL)
+		return;
+
+	dev = to_cx23885(sd->v4l2_dev);
+
+	switch (notification) {
+	case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */
+		if (sd == dev->sd_ir)
+			cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
+		break;
+	case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */
+		if (sd == dev->sd_ir)
+			cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
+		break;
+	}
+}
+
+static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
+{
+	INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler);
+	INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
+	INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
+	dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
+}
+
+static inline int encoder_on_portb(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER;
+}
+
+static inline int encoder_on_portc(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER;
+}
+
+/* Mask represents 32 different GPIOs, GPIO's are split into multiple
+ * registers depending on the board configuration (and whether the
+ * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will
+ * be pushed into the correct hardware register, regardless of the
+ * physical location. Certain registers are shared so we sanity check
+ * and report errors if we think we're tampering with a GPIo that might
+ * be assigned to the encoder (and used for the host bus).
+ *
+ * GPIO  2 through  0 - On the cx23885 bridge
+ * GPIO 18 through  3 - On the cx23417 host bus interface
+ * GPIO 23 through 19 - On the cx25840 a/v core
+ */
+void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x7)
+		cx_set(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			pr_err("%s: Setting GPIO on encoder ports\n",
+				dev->name);
+		cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		pr_info("%s: Unsupported\n", dev->name);
+}
+
+void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		cx_clear(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			pr_err("%s: Clearing GPIO moving on encoder ports\n",
+				dev->name);
+		cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		pr_info("%s: Unsupported\n", dev->name);
+}
+
+u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		return (cx_read(GP0_IO) >> 8) & mask & 0x7;
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			pr_err("%s: Reading GPIO moving on encoder ports\n",
+				dev->name);
+		return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3;
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		pr_info("%s: Unsupported\n", dev->name);
+
+	return 0;
+}
+
+void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	if ((mask & 0x00000007) && asoutput)
+		cx_set(GP0_IO, (mask & 0x7) << 16);
+	else if ((mask & 0x00000007) && !asoutput)
+		cx_clear(GP0_IO, (mask & 0x7) << 16);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			pr_err("%s: Enabling GPIO on encoder ports\n",
+				dev->name);
+	}
+
+	/* MC417_OEN is active low for output, write 1 for an input */
+	if ((mask & 0x0007fff8) && asoutput)
+		cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	else if ((mask & 0x0007fff8) && !asoutput)
+		cx_set(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	/* TODO: 23-19 */
+}
+
+static struct {
+	int vendor, dev;
+} const broken_dev_id[] = {
+	/* According with
+	 * https://openbenchmarking.org/system/1703021-RI-AMDZEN08075/Ryzen%207%201800X/lspci,
+	 * 0x1451 is PCI ID for the IOMMU found on Ryzen
+	 */
+	{ PCI_VENDOR_ID_AMD, 0x1451 },
+	/* According to sudo lspci -nn,
+	 * 0x1423 is the PCI ID for the IOMMU found on Kaveri
+	 */
+	{ PCI_VENDOR_ID_AMD, 0x1423 },
+	/* 0x1481 is the PCI ID for the IOMMU found on Starship/Matisse
+	 */
+	{ PCI_VENDOR_ID_AMD, 0x1481 },
+	/* 0x1419 is the PCI ID for the IOMMU found on 15h (Models 10h-1fh) family
+	 */
+	{ PCI_VENDOR_ID_AMD, 0x1419 },
+	/* 0x1631 is the PCI ID for the IOMMU found on Renoir/Cezanne
+	 */
+	{ PCI_VENDOR_ID_AMD, 0x1631 },
+	/* 0x5a23 is the PCI ID for the IOMMU found on RD890S/RD990
+	 */
+	{ PCI_VENDOR_ID_ATI, 0x5a23 },
+};
+
+static bool cx23885_does_need_dma_reset(void)
+{
+	int i;
+	struct pci_dev *pdev = NULL;
+
+	if (dma_reset_workaround == 0)
+		return false;
+	else if (dma_reset_workaround == 2)
+		return true;
+
+	for (i = 0; i < ARRAY_SIZE(broken_dev_id); i++) {
+		pdev = pci_get_device(broken_dev_id[i].vendor,
+				      broken_dev_id[i].dev, NULL);
+		if (pdev) {
+			pci_dev_put(pdev);
+			return true;
+		}
+	}
+	return false;
+}
+
+static int cx23885_initdev(struct pci_dev *pci_dev,
+			   const struct pci_device_id *pci_id)
+{
+	struct cx23885_dev *dev;
+	struct v4l2_ctrl_handler *hdl;
+	int err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (NULL == dev)
+		return -ENOMEM;
+
+	dev->need_dma_reset = cx23885_does_need_dma_reset();
+
+	err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
+	if (err < 0)
+		goto fail_free;
+
+	hdl = &dev->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 6);
+	if (hdl->error) {
+		err = hdl->error;
+		goto fail_ctrl;
+	}
+	dev->v4l2_dev.ctrl_handler = hdl;
+
+	/* Prepare to handle notifications from subdevices */
+	cx23885_v4l2_dev_notify_init(dev);
+
+	/* pci init */
+	dev->pci = pci_dev;
+	if (pci_enable_device(pci_dev)) {
+		err = -EIO;
+		goto fail_ctrl;
+	}
+
+	if (cx23885_dev_setup(dev) < 0) {
+		err = -EINVAL;
+		goto fail_ctrl;
+	}
+
+	/* print pci info */
+	dev->pci_rev = pci_dev->revision;
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	pr_info("%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+	       dev->name,
+	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+	       dev->pci_lat,
+		(unsigned long long)pci_resource_start(pci_dev, 0));
+
+	pci_set_master(pci_dev);
+	err = dma_set_mask(&pci_dev->dev, 0xffffffff);
+	if (err) {
+		pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+		goto fail_dma_set_mask;
+	}
+
+	err = request_irq(pci_dev->irq, cx23885_irq,
+			  IRQF_SHARED, dev->name, dev);
+	if (err < 0) {
+		pr_err("%s: can't get IRQ %d\n",
+		       dev->name, pci_dev->irq);
+		goto fail_dma_set_mask;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		cx23885_irq_add_enable(dev, PCI_MSK_GPIO0);
+		break;
+	}
+
+	/*
+	 * The CX2388[58] IR controller can start firing interrupts when
+	 * enabled, so these have to take place after the cx23885_irq() handler
+	 * is hooked up by the call to request_irq() above.
+	 */
+	cx23885_ir_pci_int_enable(dev);
+	cx23885_input_init(dev);
+
+	return 0;
+
+fail_dma_set_mask:
+	cx23885_dev_unregister(dev);
+fail_ctrl:
+	v4l2_ctrl_handler_free(hdl);
+	v4l2_device_unregister(&dev->v4l2_dev);
+fail_free:
+	kfree(dev);
+	return err;
+}
+
+static void cx23885_finidev(struct pci_dev *pci_dev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct cx23885_dev *dev = to_cx23885(v4l2_dev);
+
+	cx23885_input_fini(dev);
+	cx23885_ir_fini(dev);
+
+	cx23885_shutdown(dev);
+
+	/* unregister stuff */
+	free_irq(pci_dev->irq, dev);
+
+	pci_disable_device(pci_dev);
+
+	cx23885_dev_unregister(dev);
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	v4l2_device_unregister(v4l2_dev);
+	kfree(dev);
+}
+
+static const struct pci_device_id cx23885_pci_tbl[] = {
+	{
+		/* CX23885 */
+		.vendor       = 0x14f1,
+		.device       = 0x8852,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* CX23887 Rev 2 */
+		.vendor       = 0x14f1,
+		.device       = 0x8880,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* --- end of list --- */
+	}
+};
+MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl);
+
+static struct pci_driver cx23885_pci_driver = {
+	.name     = "cx23885",
+	.id_table = cx23885_pci_tbl,
+	.probe    = cx23885_initdev,
+	.remove   = cx23885_finidev,
+};
+
+static int __init cx23885_init(void)
+{
+	pr_info("cx23885 driver version %s loaded\n",
+		CX23885_VERSION);
+	return pci_register_driver(&cx23885_pci_driver);
+}
+
+static void __exit cx23885_fini(void)
+{
+	pci_unregister_driver(&cx23885_pci_driver);
+}
+
+module_init(cx23885_init);
+module_exit(cx23885_fini);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
new file mode 100644
index 0000000000..7551ca4a32
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -0,0 +1,2741 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include <media/v4l2-common.h>
+
+#include <media/dvb_ca_en50221.h>
+#include "s5h1409.h"
+#include "s5h1411.h"
+#include "mt2131.h"
+#include "tda8290.h"
+#include "tda18271.h"
+#include "lgdt330x.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "max2165.h"
+#include "tda10048.h"
+#include "xc2028.h"
+#include "tuner-simple.h"
+#include "dib7000p.h"
+#include "dib0070.h"
+#include "dibx000_common.h"
+#include "zl10353.h"
+#include "stv0900.h"
+#include "stv0900_reg.h"
+#include "stv6110.h"
+#include "lnbh24.h"
+#include "cx24116.h"
+#include "cx24117.h"
+#include "cimax2.h"
+#include "lgs8gxx.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
+#include "lgdt3305.h"
+#include "atbm8830.h"
+#include "ts2020.h"
+#include "ds3000.h"
+#include "cx23885-f300.h"
+#include "altera-ci.h"
+#include "stv0367.h"
+#include "drxk.h"
+#include "mt2063.h"
+#include "stv090x.h"
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "tda10071.h"
+#include "a8293.h"
+#include "mb86a20s.h"
+#include "si2165.h"
+#include "si2168.h"
+#include "si2157.h"
+#include "sp2.h"
+#include "m88ds3103.h"
+#include "m88rs6000t.h"
+#include "lgdt3306a.h"
+
+static unsigned int debug;
+
+#define dprintk(level, fmt, arg...)\
+	do { if (debug >= level)\
+		printk(KERN_DEBUG pr_fmt("%s dvb: " fmt), \
+			__func__, ##arg); \
+	} while (0)
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int alt_tuner;
+module_param(alt_tuner, int, 0644);
+MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx23885_tsport *port = q->drv_priv;
+
+	port->ts_packet_size  = 188 * 4;
+	port->ts_packet_count = 32;
+	*num_planes = 1;
+	sizes[0] = port->ts_packet_size * port->ts_packet_count;
+	*num_buffers = 32;
+	return 0;
+}
+
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf =
+		container_of(vbuf, struct cx23885_buffer, vb);
+
+	return cx23885_buf_prepare(buf, port);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(dev, buf);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer   *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_buf_queue(port, buf);
+}
+
+static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)
+{
+	struct vb2_dvb_frontends *f;
+	struct vb2_dvb_frontend *fe;
+
+	f = &port->frontends;
+
+	if (f->gate <= 1) /* undefined or fe0 */
+		fe = vb2_dvb_get_frontend(f, 1);
+	else
+		fe = vb2_dvb_get_frontend(f, f->gate);
+
+	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
+		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+}
+
+static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx23885_tsport *port = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &port->mpegq;
+	struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+	cx23885_start_dma(port, dmaq, buf);
+	return 0;
+}
+
+static void cx23885_stop_streaming(struct vb2_queue *q)
+{
+	struct cx23885_tsport *port = q->drv_priv;
+
+	cx23885_cancel_buffers(port);
+}
+
+static const struct vb2_ops dvb_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = cx23885_start_streaming,
+	.stop_streaming = cx23885_stop_streaming,
+};
+
+static struct s5h1409_config hauppauge_generic_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda10048_config hauppauge_hvr1200_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3800,
+	.dtv8_if_freq_khz = TDA10048_IF_4300,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct tda10048_config hauppauge_hvr1210_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct s5h1409_config hauppauge_ezqam_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 4000,
+	.inversion     = S5H1409_INVERSION_ON,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config hauppauge_hvr1800lp_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config hauppauge_hvr1500_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct mt2131_config hauppauge_generic_tunerconfig = {
+	0x61
+};
+
+static struct lgdt330x_config fusionhdtv_5_express = {
+	.demod_chip = LGDT3303,
+	.serial_mpeg = 0x40,
+};
+
+static struct s5h1409_config hauppauge_hvr1500q_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config dvico_s5h1409_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config dvico_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
+	.i2c_address      = 0x61,
+	.if_khz           = 5380,
+};
+
+static struct xc5000_config dvico_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+	.probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.std_map = &hauppauge_hvr1200_tda18271_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1210_tuner_config = {
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr4400_tuner_config = {
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_std_map hauppauge_hvr127x_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+};
+
+static struct tda18271_config hauppauge_hvr127x_config = {
+	.std_map = &hauppauge_hvr127x_std_map,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+	.i2c_addr           = 0x0e,
+	.mpeg_mode          = LGDT3305_MPEG_SERIAL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
+	.deny_i2c_rptr      = 1,
+	.spectral_inversion = 1,
+	.qam_if_khz         = 4000,
+	.vsb_if_khz         = 3250,
+};
+
+static struct dibx000_agc_config xc3028_agc_config = {
+	BAND_VHF | BAND_UHF,	/* band_caps */
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
+	 * P_agc_nb_est=2, P_agc_write=0
+	 */
+	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+		(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+	712,	/* inv_gain */
+	21,	/* time_stabiliz */
+
+	0,	/* alpha_level */
+	118,	/* thlock */
+
+	0,	/* wbd_inv */
+	2867,	/* wbd_ref */
+	0,	/* wbd_sel */
+	2,	/* wbd_alpha */
+
+	0,	/* agc1_max */
+	0,	/* agc1_min */
+	39718,	/* agc2_max */
+	9930,	/* agc2_min */
+	0,	/* agc1_pt1 */
+	0,	/* agc1_pt2 */
+	0,	/* agc1_pt3 */
+	0,	/* agc1_slope1 */
+	0,	/* agc1_slope2 */
+	0,	/* agc2_pt1 */
+	128,	/* agc2_pt2 */
+	29,	/* agc2_slope1 */
+	29,	/* agc2_slope2 */
+
+	17,	/* alpha_mant */
+	27,	/* alpha_exp */
+	23,	/* beta_mant */
+	51,	/* beta_exp */
+
+	1,	/* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.000000
+ * With external clock = 30.000000 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+	60000,	/* internal */
+	30000,	/* sampling */
+	1,	/* pll_cfg: prediv */
+	8,	/* pll_cfg: ratio */
+	3,	/* pll_cfg: range */
+	1,	/* pll_cfg: reset */
+	0,	/* pll_cfg: bypass */
+	0,	/* misc: refdiv */
+	0,	/* misc: bypclk_div */
+	1,	/* misc: IO_CLK_en_core */
+	1,	/* misc: ADClkSrc */
+	0,	/* misc: modulo */
+	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+	20452225, /* timf */
+	30000000  /* xtal_hz */
+};
+
+static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.hostbus_diversity = 1,
+	.tuner_is_baseband = 0,
+	.update_lna  = NULL,
+
+	.agc_config_count = 1,
+	.agc = &xc3028_agc_config,
+	.bw  = &xc3028_bw_config,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div = 0,
+	.agc_control  = NULL,
+	.spur_protect = 0,
+
+	.output_mode = OUTMODE_MPEG2_SERIAL,
+};
+
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+	.demod_address = 0x0f,
+	.if2           = 45600,
+	.no_tuner      = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static struct stv0900_reg stv0900_ts_regs[] = {
+	{ R0900_TSGENERAL, 0x00 },
+	{ R0900_P1_TSSPEED, 0x40 },
+	{ R0900_P2_TSSPEED, 0x40 },
+	{ R0900_P1_TSCFGM, 0xc0 },
+	{ R0900_P2_TSCFGM, 0xc0 },
+	{ R0900_P1_TSCFGH, 0xe0 },
+	{ R0900_P2_TSCFGH, 0xe0 },
+	{ R0900_P1_TSCFGL, 0x20 },
+	{ R0900_P2_TSCFGL, 0x20 },
+	{ 0xffff, 0xff }, /* terminate */
+};
+
+static struct stv0900_config netup_stv0900_config = {
+	.demod_address = 0x68,
+	.demod_mode = 1, /* dual */
+	.xtal = 8000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.ts_config_regs = stv0900_ts_regs,
+	.tun1_maddress = 0,/* 0x60 */
+	.tun2_maddress = 3,/* 0x63 */
+	.tun1_adc = 1,/* 1 Vpp */
+	.tun2_adc = 1,/* 1 Vpp */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_a = {
+	.i2c_address = 0x60,
+	.mclk = 16000000,
+	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_b = {
+	.i2c_address = 0x63,
+	.mclk = 16000000,
+	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
+};
+
+static struct cx24116_config tbs_cx24116_config = {
+	.demod_address = 0x55,
+};
+
+static struct cx24117_config tbs_cx24117_config = {
+	.demod_address = 0x55,
+};
+
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
+};
+
+static struct ts2020_config tevii_ts2020_config  = {
+	.tuner_address = 0x60,
+	.clk_out_div = 1,
+	.frequency_div = 1146000,
+};
+
+static struct cx24116_config dvbworld_cx24116_config = {
+	.demod_address = 0x05,
+};
+
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+	.prod = LGS8GXX_PROD_LGS8GL5,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 5380, /* 5.38 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 0,
+	.if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 5380,
+};
+
+static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
+	.demod_address = 0x10,
+};
+
+static struct xc5000_config mygica_x8507_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 4000,
+};
+
+static struct stv090x_config prof_8000_stv090x_config = {
+	.device                 = STV0903,
+	.demod_mode             = STV090x_SINGLE,
+	.clk_mode               = STV090x_CLK_EXT,
+	.xtal                   = 27000000,
+	.address                = 0x6A,
+	.ts1_mode               = STV090x_TSMODE_PARALLEL_PUNCTURED,
+	.repeater_level         = STV090x_RPTLEVEL_64,
+	.adc1_range             = STV090x_ADC_2Vpp,
+	.diseqc_envelope_mode   = false,
+
+	.tuner_get_frequency    = stb6100_get_frequency,
+	.tuner_set_frequency    = stb6100_set_frequency,
+	.tuner_set_bandwidth    = stb6100_set_bandwidth,
+	.tuner_get_bandwidth    = stb6100_get_bandwidth,
+};
+
+static struct stb6100_config prof_8000_stb6100_config = {
+	.tuner_address = 0x60,
+	.refclock = 27000000,
+};
+
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {
+	.i2c_addr               = 0x59,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {
+	.i2c_addr               = 0x0e,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static int p8000_set_voltage(struct dvb_frontend *fe,
+			     enum fe_sec_voltage voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	if (voltage == SEC_VOLTAGE_18)
+		cx_write(MC417_RWD, 0x00001e00);
+	else if (voltage == SEC_VOLTAGE_13)
+		cx_write(MC417_RWD, 0x00001a00);
+	else
+		cx_write(MC417_RWD, 0x00001800);
+	return 0;
+}
+
+static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx23885_gpio_set(dev, GPIO_1);
+		cx23885_gpio_clear(dev, GPIO_0);
+		break;
+	case SEC_VOLTAGE_18:
+		cx23885_gpio_set(dev, GPIO_1);
+		cx23885_gpio_set(dev, GPIO_0);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx23885_gpio_clear(dev, GPIO_1);
+		cx23885_gpio_clear(dev, GPIO_0);
+		break;
+	}
+
+	/* call the frontend set_voltage function */
+	port->fe_set_voltage(fe, voltage);
+
+	return 0;
+}
+
+static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx23885_gpio_set(dev, GPIO_13);
+		cx23885_gpio_clear(dev, GPIO_12);
+		break;
+	case SEC_VOLTAGE_18:
+		cx23885_gpio_set(dev, GPIO_13);
+		cx23885_gpio_set(dev, GPIO_12);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx23885_gpio_clear(dev, GPIO_13);
+		cx23885_gpio_clear(dev, GPIO_12);
+		break;
+	}
+	/* call the frontend set_voltage function */
+	return port->fe_set_voltage(fe, voltage);
+}
+
+static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
+				u8 data, int *mem)
+{
+	/* MC417 */
+	#define SP2_DATA              0x000000ff
+	#define SP2_WR                0x00008000
+	#define SP2_RD                0x00004000
+	#define SP2_ACK               0x00001000
+	#define SP2_ADHI              0x00000800
+	#define SP2_ADLO              0x00000400
+	#define SP2_CS1               0x00000200
+	#define SP2_CS0               0x00000100
+	#define SP2_EN_ALL            0x00001000
+	#define SP2_CTRL_OFF          (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)
+
+	struct cx23885_tsport *port = priv;
+	struct cx23885_dev *dev = port->dev;
+	int ret;
+	int tmp = 0;
+	unsigned long timeout;
+
+	mutex_lock(&dev->gpio_lock);
+
+	/* write addr */
+	cx_write(MC417_OEN, SP2_EN_ALL);
+	cx_write(MC417_RWD, SP2_CTRL_OFF |
+				SP2_ADLO | (0xff & addr));
+	cx_clear(MC417_RWD, SP2_ADLO);
+	cx_write(MC417_RWD, SP2_CTRL_OFF |
+				SP2_ADHI | (0xff & (addr >> 8)));
+	cx_clear(MC417_RWD, SP2_ADHI);
+
+	if (read)
+		/* data in */
+		cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);
+	else
+		/* data out */
+		cx_write(MC417_RWD, SP2_CTRL_OFF | data);
+
+	/* chip select 0 */
+	cx_clear(MC417_RWD, SP2_CS0);
+
+	/* read/write */
+	cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);
+
+	/* wait for a maximum of 1 msec */
+	timeout = jiffies + msecs_to_jiffies(1);
+	while (!time_after(jiffies, timeout)) {
+		tmp = cx_read(MC417_RWD);
+		if ((tmp & SP2_ACK) == 0)
+			break;
+		usleep_range(50, 100);
+	}
+
+	cx_set(MC417_RWD, SP2_CTRL_OFF);
+	*mem = tmp & 0xff;
+
+	mutex_unlock(&dev->gpio_lock);
+
+	if (!read) {
+		if (*mem < 0) {
+			ret = -EREMOTEIO;
+			goto err;
+		}
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (p->modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		/* Select Digital TV */
+		cx23885_gpio_set(dev, GPIO_0);
+		break;
+	}
+
+	/* Call the real set_frontend */
+	if (port->set_frontend)
+		return port->set_frontend(fe);
+
+	return 0;
+}
+
+static void cx23885_set_frontend_hook(struct cx23885_tsport *port,
+				     struct dvb_frontend *fe)
+{
+	port->set_frontend = fe->ops.set_frontend;
+	fe->ops.set_frontend = cx23885_dvb_set_frontend;
+}
+
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+	.prod = LGS8GXX_PROD_LGS8G75,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 6500, /* 6.50 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 1,
+	.adc_vpp = 2, /* 1.6 Vpp */
+	.if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 6500,
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 0,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+	.agc_min = 0x2E,
+	.agc_max = 0xFF,
+	.agc_hold_loop = 0,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 1,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+	.agc_min = 0x2E,
+	.agc_max = 0xFF,
+	.agc_hold_loop = 0,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+static struct stv0367_config netup_stv0367_config[] = {
+	{
+		.demod_address = 0x1c,
+		.xtal = 27000000,
+		.if_khz = 4500,
+		.if_iq_mode = 0,
+		.ts_mode = 1,
+		.clk_pol = 0,
+	}, {
+		.demod_address = 0x1d,
+		.xtal = 27000000,
+		.if_khz = 4500,
+		.if_iq_mode = 0,
+		.ts_mode = 1,
+		.clk_pol = 0,
+	},
+};
+
+static struct xc5000_config netup_xc5000_config[] = {
+	{
+		.i2c_address = 0x61,
+		.if_khz = 4500,
+	}, {
+		.i2c_address = 0x64,
+		.if_khz = 4500,
+	},
+};
+
+static struct drxk_config terratec_drxk_config[] = {
+	{
+		.adr = 0x29,
+		.no_i2c_bridge = 1,
+	}, {
+		.adr = 0x2a,
+		.no_i2c_bridge = 1,
+	},
+};
+
+static struct mt2063_config terratec_mt2063_config[] = {
+	{
+		.tuner_address = 0x60,
+	}, {
+		.tuner_address = 0x67,
+	},
+};
+
+static const struct tda10071_platform_data hauppauge_tda10071_pdata = {
+	.clk = 40444000, /* 40.444 MHz */
+	.i2c_wr_max = 64,
+	.ts_mode = TDA10071_TS_SERIAL,
+	.pll_multiplier = 20,
+	.tuner_i2c_addr = 0x54,
+};
+
+static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_PARALLEL,
+	.ts_clk = 16000,
+	.ts_clk_pol = 1,
+	.lnb_en_pol = 1,
+	.lnb_hv_pol = 0,
+	.agc = 0x99,
+};
+
+static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_CI,
+	.ts_clk = 10000,
+	.ts_clk_pol = 1,
+	.lnb_en_pol = 1,
+	.lnb_hv_pol = 0,
+	.agc = 0x99,
+};
+
+static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {
+	.i2c_addr = 0x69,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.ts_mode = M88DS3103_TS_PARALLEL,
+	.ts_clk = 16000,
+	.ts_clk_pol = 1,
+	.agc = 0x99,
+};
+
+static struct lgdt3306a_config hauppauge_hvr1265k4_config = {
+	.i2c_addr               = 0x59,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
+{
+	struct cx23885_dev *dev = (struct cx23885_dev *)device;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+	uint32_t mem = 0;
+
+	mem = cx_read(MC417_RWD);
+	if (read)
+		cx_set(MC417_OEN, ALT_DATA);
+	else {
+		cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
+		mem &= ~ALT_DATA;
+		mem |= (data & ALT_DATA);
+	}
+
+	if (flag)
+		mem |= ALT_AD_RG;
+	else
+		mem &= ~ALT_AD_RG;
+
+	mem &= ~ALT_CS;
+	if (read)
+		mem = (mem & ~ALT_RD) | ALT_WR;
+	else
+		mem = (mem & ~ALT_WR) | ALT_RD;
+
+	cx_write(MC417_RWD, mem);  /* start RW cycle */
+
+	for (;;) {
+		mem = cx_read(MC417_RWD);
+		if ((mem & ALT_RDY) == 0)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		udelay(1);
+	}
+
+	cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
+	if (read)
+		return mem & ALT_DATA;
+
+	return 0;
+};
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	struct dib7000p_ops *dib7000p_ops = fe->sec_priv;
+
+	return dib7000p_ops->set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return 0;
+}
+
+static struct dib0070_config dib7070p_dib0070_config = {
+	.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	.reset = dib7070_tuner_reset,
+	.sleep = dib7070_tuner_sleep,
+	.clock_khz = 12000,
+	.freq_offset_khz_vhf = 550,
+	/* .flip_chip = 1, */
+};
+
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+
+	/*
+	 * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
+	 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
+		 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+	.inv_gain = 600,
+	.time_stabiliz = 10,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+	.agc1_max = 65535,
+	.agc1_min = 0,
+	.agc2_max = 65535,
+	.agc2_min = 0,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 40,
+	.agc1_pt3 = 183,
+	.agc1_slope1 = 206,
+	.agc1_slope2 = 255,
+	.agc2_pt1 = 72,
+	.agc2_pt2 = 152,
+	.agc2_slope1 = 88,
+	.agc2_slope2 = 90,
+	.alpha_mant = 17,
+	.alpha_exp = 27,
+	.beta_mant = 23,
+	.beta_exp = 51,
+	.perform_agc_softsplit = 0,
+};
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 20,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	/* refsel, sel, freq_15k */
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20452225,
+	.xtal_hz = 12000000,
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+	/* .output_mode = OUTMODE_MPEG2_FIFO, */
+	.output_mode = OUTMODE_MPEG2_SERIAL,
+	/* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */
+	.gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+};
+
+static int dvb_register_ci_mac(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct i2c_client *client_ci = NULL;
+	struct vb2_dvb_frontend *fe0;
+
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+		static struct netup_card_info cinfo;
+
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		memcpy(port->frontends.adapter.proposed_mac,
+				cinfo.port[port->nr - 1].mac, 6);
+		pr_info("NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
+			port->nr, port->frontends.adapter.proposed_mac);
+
+		netup_ci_init(port);
+		return 0;
+		}
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+		struct altera_ci_config netup_ci_cfg = {
+			.dev = dev,/* magic number to identify*/
+			.adapter = &port->frontends.adapter,/* for CI */
+			.demux = &fe0->dvb.demux,/* for hw pid filter */
+			.fpga_rw = netup_altera_fpga_rw,
+		};
+
+		altera_ci_init(&netup_ci_cfg, port->nr);
+		return 0;
+		}
+	case CX23885_BOARD_TEVII_S470: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+		if (port->nr != 1)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+		pr_info("TeVii S470 MAC= %pM\n", eeprom + 0xa0);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
+		return 0;
+		}
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+		if (port->nr > 2)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+				sizeof(eeprom));
+		pr_info("%s port %d MAC address: %pM\n",
+			cx23885_boards[dev->board].name, port->nr,
+			eeprom + 0xc0 + (port->nr-1) * 8);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
+			(port->nr-1) * 8, 6);
+		return 0;
+		}
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_TT_CT2_4500_CI: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+		struct sp2_config sp2_config;
+		struct i2c_board_info info;
+		struct cx23885_i2c *i2c_bus = &dev->i2c_bus[0];
+
+		/* attach CI */
+		memset(&sp2_config, 0, sizeof(sp2_config));
+		sp2_config.dvb_adap = &port->frontends.adapter;
+		sp2_config.priv = port;
+		sp2_config.ci_control = cx23885_sp2_ci_ctrl;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "sp2", I2C_NAME_SIZE);
+		info.addr = 0x40;
+		info.platform_data = &sp2_config;
+		request_module(info.type);
+		client_ci = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_ci))
+			return -ENODEV;
+		if (!try_module_get(client_ci->dev.driver->owner)) {
+			i2c_unregister_device(client_ci);
+			return -ENODEV;
+		}
+		port->i2c_client_ci = client_ci;
+
+		if (port->nr != 1)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+				sizeof(eeprom));
+		pr_info("%s MAC address: %pM\n",
+			cx23885_boards[dev->board].name, eeprom + 0xc0);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);
+		return 0;
+		}
+	}
+	return 0;
+}
+
+static int dvb_register(struct cx23885_tsport *port)
+{
+	struct dib7000p_ops dib7000p_ops;
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
+	struct vb2_dvb_frontend *fe0, *fe1 = NULL;
+	struct si2168_config si2168_config;
+	struct si2165_platform_data si2165_pdata;
+	struct si2157_config si2157_config;
+	struct ts2020_config ts2020_config;
+	struct m88ds3103_platform_data m88ds3103_pdata;
+	struct m88rs6000t_config m88rs6000t_config = {};
+	struct a8293_platform_data a8293_pdata = {};
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client_demod = NULL, *client_tuner = NULL;
+	struct i2c_client *client_sec = NULL;
+	int (*p_set_voltage)(struct dvb_frontend *fe,
+			     enum fe_sec_voltage voltage) = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+	int ret;
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	/* init struct vb2_dvb */
+	fe0->dvb.name = dev->name;
+
+	/* multi-frontend gate control is undefined or defaults to fe0 */
+	port->frontends.gate = 0;
+
+	/* Sets the gate control callback to be used by i2c command calls */
+	port->gate_ctrl = cx23885_dvb_gate_ctrl;
+
+	/* init frontend */
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_generic_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(mt2131_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_generic_tunerconfig, 0);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+					       &hauppauge_lgdt3305_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_hvr127x_config);
+		if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275)
+			cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &hcw_s5h1411_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_tda18271_config);
+
+		tda18271_attach(&dev->ts1.analog_fe,
+			0x60, &dev->i2c_bus[1].i2c_adap,
+			&hauppauge_tda18271_config);
+
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		i2c_bus = &dev->i2c_bus[0];
+		switch (alt_tuner) {
+		case 1:
+			fe0->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_ezqam_config,
+					   &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				   &dev->i2c_bus[1].i2c_adap, 0x42,
+				   &tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_tda18271_config);
+			break;
+		case 0:
+		default:
+			fe0->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_generic_config,
+					   &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_generic_tunerconfig, 0);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1800lp_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(mt2131_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_generic_tunerconfig, 0);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_5_express,
+					       0x0e,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap, 0x61,
+			   TUNER_LG_TDVS_H06XF);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+		i2c_bus = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1500q_config,
+						&dev->i2c_bus[0].i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_hvr1500q_tunerconfig);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+		i2c_bus = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1500_config,
+						&dev->i2c_bus[0].i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &i2c_bus->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_OREN538,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1200_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda829x_attach, fe0->dvb.frontend,
+			   &dev->i2c_bus[1].i2c_adap, 0x42,
+			   &tda829x_no_probe);
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_hvr1200_tuner_config);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1210_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[1].i2c_adap,
+				&hauppauge_hvr1210_tuner_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		i2c_bus = &dev->i2c_bus[0];
+
+		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
+			return -ENODEV;
+
+		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap,
+			0x12, &hauppauge_hvr1400_dib7000_config);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x64,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname   = XC3028L_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_DIBCOM52,
+				/* This is true for all demods with
+					v36 firmware? */
+				.type    = XC2028_D2633,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&dvico_s5h1409_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+							&dvico_s5h1411_config,
+							&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &dvico_xc5000_tunerconfig);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend      *fe;
+			struct xc2028_config	  cfg = {
+				.i2c_adap  = &i2c_bus->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_ZARLINK456,
+			};
+
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+					&cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	}
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: {
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+		/* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */
+		/* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */
+
+		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
+			return -ENODEV;
+
+		if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) {
+			pr_warn("Unable to enumerate dib7000p\n");
+			return -ENODEV;
+		}
+		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config);
+		if (fe0->dvb.frontend != NULL) {
+			struct i2c_adapter *tun_i2c;
+
+			fe0->dvb.frontend->sec_priv = kmemdup(&dib7000p_ops, sizeof(dib7000p_ops), GFP_KERNEL);
+			if (!fe0->dvb.frontend->sec_priv)
+				return -ENOMEM;
+			tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
+			if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
+				return -ENODEV;
+		}
+		break;
+	}
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+			&dvico_fusionhdtv_xc3028,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend      *fe;
+			struct xc2028_config	  cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_ZARLINK456,
+			};
+
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+				&cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend	*fe;
+			struct xc4000_config	cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+
+			fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
+					&dev->i2c_bus[1].i2c_adap, &cfg);
+			if (!fe) {
+				pr_err("%s/2: xc4000 attach failed\n",
+				       dev->name);
+				goto frontend_detach;
+			}
+		}
+		break;
+	case CX23885_BOARD_TBS_6920:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					&tbs_cx24116_config,
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
+
+		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		i2c_bus = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* PORT B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap);
+			break;
+		/* PORT C */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap);
+			break;
+		}
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(ts2020_attach, fe0->dvb.frontend,
+				&tevii_ts2020_config, &i2c_bus->i2c_adap);
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
+		}
+
+		break;
+	case CX23885_BOARD_DVBWORLD_2005:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+			&dvbworld_cx24116_config,
+			&i2c_bus->i2c_adap);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		i2c_bus = &dev->i2c_bus[0];
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(stv0900_attach,
+							&netup_stv0900_config,
+							&i2c_bus->i2c_adap, 0);
+			if (fe0->dvb.frontend != NULL) {
+				if (dvb_attach(stv6110_attach,
+						fe0->dvb.frontend,
+						&netup_stv6110_tunerconfig_a,
+						&i2c_bus->i2c_adap)) {
+					if (!dvb_attach(lnbh24_attach,
+							fe0->dvb.frontend,
+							&i2c_bus->i2c_adap,
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x09))
+						pr_err("No LNBH24 found!\n");
+
+				}
+			}
+			break;
+		/* port C */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(stv0900_attach,
+							&netup_stv0900_config,
+							&i2c_bus->i2c_adap, 1);
+			if (fe0->dvb.frontend != NULL) {
+				if (dvb_attach(stv6110_attach,
+						fe0->dvb.frontend,
+						&netup_stv6110_tunerconfig_b,
+						&i2c_bus->i2c_adap)) {
+					if (!dvb_attach(lnbh24_attach,
+							fe0->dvb.frontend,
+							&i2c_bus->i2c_adap,
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x0a))
+						pr_err("No LNBH24 found!\n");
+
+				}
+			}
+			break;
+		}
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&mygica_x8506_lgs8gl5_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+		break;
+	case CX23885_BOARD_MYGICA_X8507:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+			&mygica_x8507_mb86a20s_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap,
+			   &mygica_x8507_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+		break;
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&magicpro_prohdtve2_lgs8g75_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap,
+			   &magicpro_prohdtve2_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[0].i2c_adap,
+			   &hauppauge_tda18271_config);
+
+		tda18271_attach(&dev->ts1.analog_fe,
+			0x60, &dev->i2c_bus[1].i2c_adap,
+			&hauppauge_tda18271_config);
+
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[0].i2c_adap,
+			   &hauppauge_tda18271_config);
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg1,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(max2165_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &mygic_x8558pro_max2165_cfg1);
+			break;
+		/* port C */
+		case 2:
+			i2c_bus = &dev->i2c_bus[1];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg2,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(max2165_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &mygic_x8558pro_max2165_cfg2);
+		}
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		if (port->nr > 2)
+			return 0;
+
+		i2c_bus = &dev->i2c_bus[0];
+		mfe_shared = 1;/* MFE */
+		port->frontends.gate = 0;/* not clear for me yet */
+		/* ports B, C */
+		/* MFE frontend 1 DVB-T */
+		fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
+					&netup_stv0367_config[port->nr - 1],
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&netup_xc5000_config[port->nr - 1]))
+			goto frontend_detach;
+		/* load xc5000 firmware */
+		fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
+
+		/* MFE frontend 2 */
+		fe1 = vb2_dvb_get_frontend(&port->frontends, 2);
+		if (fe1 == NULL)
+			goto frontend_detach;
+		/* DVB-C init */
+		fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
+					&netup_stv0367_config[port->nr - 1],
+					&i2c_bus->i2c_adap);
+		if (fe1->dvb.frontend == NULL)
+			break;
+
+		fe1->dvb.frontend->id = 1;
+		if (NULL == dvb_attach(xc5000_attach,
+				       fe1->dvb.frontend,
+				       &i2c_bus->i2c_adap,
+				       &netup_xc5000_config[port->nr - 1]))
+			goto frontend_detach;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(drxk_attach,
+					&terratec_drxk_config[0],
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			if (!dvb_attach(mt2063_attach,
+					fe0->dvb.frontend,
+					&terratec_mt2063_config[0],
+					&i2c_bus2->i2c_adap))
+				goto frontend_detach;
+			break;
+		/* port c */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(drxk_attach,
+					&terratec_drxk_config[1],
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			if (!dvb_attach(mt2063_attach,
+					fe0->dvb.frontend,
+					&terratec_mt2063_config[1],
+					&i2c_bus2->i2c_adap))
+				goto frontend_detach;
+			break;
+		}
+		break;
+	case CX23885_BOARD_TEVII_S471:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(ts2020_attach, fe0->dvb.frontend,
+			   &tevii_ts2020_config, &i2c_bus->i2c_adap);
+		break;
+	case CX23885_BOARD_PROF_8000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(stv090x_attach,
+						&prof_8000_stv090x_config,
+						&i2c_bus->i2c_adap,
+						STV090x_DEMODULATOR_0);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		if (!dvb_attach(stb6100_attach,
+				fe0->dvb.frontend,
+				&prof_8000_stb6100_config,
+				&i2c_bus->i2c_adap))
+			goto frontend_detach;
+
+		fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR4400: {
+		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
+		struct a8293_platform_data a8293_pdata = {};
+
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			/* attach demod + tuner combo */
+			memset(&info, 0, sizeof(info));
+			strscpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
+			info.addr = 0x05;
+			info.platform_data = &tda10071_pdata;
+			request_module("tda10071");
+			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
+			port->i2c_client_demod = client_demod;
+
+			/* attach SEC */
+			a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(info));
+			strscpy(info.type, "a8293", I2C_NAME_SIZE);
+			info.addr = 0x0b;
+			info.platform_data = &a8293_pdata;
+			request_module("a8293");
+			client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_sec))
+				goto frontend_detach;
+			if (!try_module_get(client_sec->dev.driver->owner)) {
+				i2c_unregister_device(client_sec);
+				goto frontend_detach;
+			}
+			port->i2c_client_sec = client_sec;
+			break;
+		/* port c */
+		case 2:
+			/* attach frontend */
+			memset(&si2165_pdata, 0, sizeof(si2165_pdata));
+			si2165_pdata.fe = &fe0->dvb.frontend;
+			si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL;
+			si2165_pdata.ref_freq_hz = 16000000;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2165", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2165_pdata;
+			request_module(info.type);
+			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			if (fe0->dvb.frontend == NULL)
+				break;
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (!dvb_attach(tda18271_attach,
+					fe0->dvb.frontend,
+					0x60, &i2c_bus2->i2c_adap,
+				  &hauppauge_hvr4400_tuner_config))
+				goto frontend_detach;
+			break;
+		}
+		break;
+	}
+	case CX23885_BOARD_HAUPPAUGE_STARBURST: {
+		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
+		struct a8293_platform_data a8293_pdata = {};
+
+		i2c_bus = &dev->i2c_bus[0];
+
+		/* attach demod + tuner combo */
+		memset(&info, 0, sizeof(info));
+		strscpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
+		info.addr = 0x05;
+		info.platform_data = &tda10071_pdata;
+		request_module("tda10071");
+		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_demod))
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
+		port->i2c_client_demod = client_demod;
+
+		/* attach SEC */
+		a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+		memset(&info, 0, sizeof(info));
+		strscpy(info.type, "a8293", I2C_NAME_SIZE);
+		info.addr = 0x0b;
+		info.platform_data = &a8293_pdata;
+		request_module("a8293");
+		client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_sec))
+			goto frontend_detach;
+		if (!try_module_get(client_sec->dev.driver->owner)) {
+			i2c_unregister_device(client_sec);
+			goto frontend_detach;
+		}
+		port->i2c_client_sec = client_sec;
+		break;
+	}
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_S950:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		switch (port->nr) {
+		/* port b - satellite */
+		case 1:
+			/* attach frontend */
+			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+					&dvbsky_t9580_m88ds3103_config,
+					&i2c_bus2->i2c_adap, &adapter);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&ts2020_config, 0, sizeof(ts2020_config));
+			ts2020_config.fe = fe0->dvb.frontend;
+			ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "ts2020", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &ts2020_config;
+			request_module(info.type);
+			client_tuner = i2c_new_client_device(adapter, &info);
+			if (!i2c_client_has_driver(client_tuner))
+				goto frontend_detach;
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+
+			/* delegate signal strength measurement to tuner */
+			fe0->dvb.frontend->ops.read_signal_strength =
+				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+			/*
+			 * for setting the voltage we need to set GPIOs on
+			 * the card.
+			 */
+			port->fe_set_voltage =
+				fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+				dvbsky_t9580_set_voltage;
+
+			port->i2c_client_tuner = client_tuner;
+
+			break;
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_client_device(adapter, &info);
+			if (!i2c_client_has_driver(client_tuner))
+				goto frontend_detach;
+
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+
+		/* attach frontend */
+		memset(&si2168_config, 0, sizeof(si2168_config));
+		si2168_config.i2c_adapter = &adapter;
+		si2168_config.fe = &fe0->dvb.frontend;
+		si2168_config.ts_mode = SI2168_TS_PARALLEL;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "si2168", I2C_NAME_SIZE);
+		info.addr = 0x64;
+		info.platform_data = &si2168_config;
+		request_module(info.type);
+		client_demod = i2c_new_client_device(&i2c_bus2->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_demod))
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		port->i2c_client_demod = client_demod;
+
+		/* attach tuner */
+		memset(&si2157_config, 0, sizeof(si2157_config));
+		si2157_config.fe = fe0->dvb.frontend;
+		si2157_config.if_port = 1;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "si2157", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &si2157_config;
+		request_module(info.type);
+		client_tuner = i2c_new_client_device(adapter, &info);
+		if (!i2c_client_has_driver(client_tuner))
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_DVBSKY_S950C:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+
+		/* attach frontend */
+		fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+				&dvbsky_s950c_m88ds3103_config,
+				&i2c_bus2->i2c_adap, &adapter);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		/* attach tuner */
+		memset(&ts2020_config, 0, sizeof(ts2020_config));
+		ts2020_config.fe = fe0->dvb.frontend;
+		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "ts2020", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &ts2020_config;
+		request_module(info.type);
+		client_tuner = i2c_new_client_device(adapter, &info);
+		if (!i2c_client_has_driver(client_tuner))
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+
+		/* delegate signal strength measurement to tuner */
+		fe0->dvb.frontend->ops.read_signal_strength =
+			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_DVBSKY_S952:
+		/* attach frontend */
+		memset(&m88ds3103_pdata, 0, sizeof(m88ds3103_pdata));
+		m88ds3103_pdata.clk = 27000000;
+		m88ds3103_pdata.i2c_wr_max = 33;
+		m88ds3103_pdata.agc = 0x99;
+		m88ds3103_pdata.clk_out = M88DS3103_CLOCK_OUT_DISABLED;
+		m88ds3103_pdata.lnb_en_pol = 1;
+
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			i2c_bus = &dev->i2c_bus[1];
+			m88ds3103_pdata.ts_mode = M88DS3103_TS_PARALLEL;
+			m88ds3103_pdata.ts_clk = 16000;
+			m88ds3103_pdata.ts_clk_pol = 1;
+			p_set_voltage = dvbsky_t9580_set_voltage;
+			break;
+		/* port c */
+		case 2:
+			i2c_bus = &dev->i2c_bus[0];
+			m88ds3103_pdata.ts_mode = M88DS3103_TS_SERIAL;
+			m88ds3103_pdata.ts_clk = 96000;
+			m88ds3103_pdata.ts_clk_pol = 0;
+			p_set_voltage = dvbsky_s952_portc_set_voltage;
+			break;
+		default:
+			return 0;
+		}
+
+		memset(&info, 0, sizeof(info));
+		strscpy(info.type, "m88ds3103", I2C_NAME_SIZE);
+		info.addr = 0x68;
+		info.platform_data = &m88ds3103_pdata;
+		request_module(info.type);
+		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_demod))
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		port->i2c_client_demod = client_demod;
+		adapter = m88ds3103_pdata.get_i2c_adapter(client_demod);
+		fe0->dvb.frontend = m88ds3103_pdata.get_dvb_frontend(client_demod);
+
+		/* attach tuner */
+		memset(&ts2020_config, 0, sizeof(ts2020_config));
+		ts2020_config.fe = fe0->dvb.frontend;
+		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "ts2020", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &ts2020_config;
+		request_module(info.type);
+		client_tuner = i2c_new_client_device(adapter, &info);
+		if (!i2c_client_has_driver(client_tuner))
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+
+		/* delegate signal strength measurement to tuner */
+		fe0->dvb.frontend->ops.read_signal_strength =
+			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+		/*
+		 * for setting the voltage we need to set GPIOs on
+		 * the card.
+		 */
+		port->fe_set_voltage =
+			fe0->dvb.frontend->ops.set_voltage;
+		fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
+
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_DVBSKY_T982:
+		memset(&si2168_config, 0, sizeof(si2168_config));
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			i2c_bus = &dev->i2c_bus[1];
+			si2168_config.ts_mode = SI2168_TS_PARALLEL;
+			break;
+		/* port c */
+		case 2:
+			i2c_bus = &dev->i2c_bus[0];
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			break;
+		}
+
+		/* attach frontend */
+		si2168_config.i2c_adapter = &adapter;
+		si2168_config.fe = &fe0->dvb.frontend;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "si2168", I2C_NAME_SIZE);
+		info.addr = 0x64;
+		info.platform_data = &si2168_config;
+		request_module(info.type);
+		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+		if (!i2c_client_has_driver(client_demod))
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		port->i2c_client_demod = client_demod;
+
+		/* attach tuner */
+		memset(&si2157_config, 0, sizeof(si2157_config));
+		si2157_config.fe = fe0->dvb.frontend;
+		si2157_config.if_port = 1;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "si2157", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &si2157_config;
+		request_module(info.type);
+		client_tuner = i2c_new_client_device(adapter, &info);
+		if (!i2c_client_has_driver(client_tuner))
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+
+		/* port b - satellite */
+		case 1:
+			/* attach frontend */
+			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+					&hauppauge_hvr5525_m88ds3103_config,
+					&i2c_bus->i2c_adap, &adapter);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach SEC */
+			a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(info));
+			strscpy(info.type, "a8293", I2C_NAME_SIZE);
+			info.addr = 0x0b;
+			info.platform_data = &a8293_pdata;
+			request_module("a8293");
+			client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_sec))
+				goto frontend_detach;
+			if (!try_module_get(client_sec->dev.driver->owner)) {
+				i2c_unregister_device(client_sec);
+				goto frontend_detach;
+			}
+			port->i2c_client_sec = client_sec;
+
+			/* attach tuner */
+			memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));
+			m88rs6000t_config.fe = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "m88rs6000t", I2C_NAME_SIZE);
+			info.addr = 0x21;
+			info.platform_data = &m88rs6000t_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(adapter, &info);
+			if (!i2c_client_has_driver(client_tuner))
+				goto frontend_detach;
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			/* delegate signal strength measurement to tuner */
+			fe0->dvb.frontend->ops.read_signal_strength =
+				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+			break;
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module("%s", info.type);
+			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&i2c_bus2->i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			dev->ts1.analog_fe.tuner_priv = client_tuner;
+			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+			       &fe0->dvb.frontend->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
+
+			break;
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
+		switch (port->nr) {
+		/* port b - Terrestrial/cable */
+		case 1:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module("%s", info.type);
+			client_demod = i2c_new_client_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			/* we only attach tuner for analog on the 888 version */
+			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) {
+				pr_info("%s(): QUADHD_DVB analog setup\n",
+					__func__);
+				dev->ts1.analog_fe.tuner_priv = client_tuner;
+				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+				       &fe0->dvb.frontend->ops.tuner_ops,
+				       sizeof(struct dvb_tuner_ops));
+			}
+			break;
+
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x66;
+			info.platform_data = &si2168_config;
+			request_module("%s", info.type);
+			client_demod = i2c_new_client_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x62;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
+		switch (port->nr) {
+		/* port b - Terrestrial/cable */
+		case 1:
+			/* attach frontend */
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			si2157_config.inversion = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			/* we only attach tuner for analog on the 888 version */
+			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC) {
+				pr_info("%s(): QUADHD_ATSC analog setup\n",
+					__func__);
+				dev->ts1.analog_fe.tuner_priv = client_tuner;
+				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+				       &fe0->dvb.frontend->ops.tuner_ops,
+				       sizeof(struct dvb_tuner_ops));
+			}
+			break;
+
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			si2157_config.inversion = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x62;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		switch (port->nr) {
+		/* port c - Terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+					&hauppauge_hvr1265k4_config,
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			si2157_config.inversion = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner))
+				goto frontend_detach;
+
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				client_tuner = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			dev->ts1.analog_fe.tuner_priv = client_tuner;
+			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+			       &fe0->dvb.frontend->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
+			break;
+		}
+		break;
+	default:
+		pr_info("%s: The frontend of your DVB/ATSC card  isn't supported yet\n",
+			dev->name);
+		break;
+	}
+
+	if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
+		pr_err("%s: frontend initialization failed\n",
+		       dev->name);
+		goto frontend_detach;
+	}
+
+	/* define general-purpose callback pointer */
+	fe0->dvb.frontend->callback = cx23885_tuner_callback;
+	if (fe1)
+		fe1->dvb.frontend->callback = cx23885_tuner_callback;
+#if 0
+	/* Ensure all frontends negotiate bus access */
+	fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+	if (fe1)
+		fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+#endif
+
+	/* Put the tuner in standby to keep it quiet */
+	call_all(dev, tuner, standby);
+
+	if (fe0->dvb.frontend->ops.analog_ops.standby)
+		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
+
+	/* register everything */
+	ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+				   &dev->pci->dev, NULL,
+				   adapter_nr, mfe_shared);
+	if (ret)
+		goto frontend_detach;
+
+	ret = dvb_register_ci_mac(port);
+	if (ret)
+		goto frontend_detach;
+
+	return 0;
+
+frontend_detach:
+	/* remove I2C client for SEC */
+	client_sec = port->i2c_client_sec;
+	if (client_sec) {
+		module_put(client_sec->dev.driver->owner);
+		i2c_unregister_device(client_sec);
+		port->i2c_client_sec = NULL;
+	}
+
+	/* remove I2C client for tuner */
+	client_tuner = port->i2c_client_tuner;
+	if (client_tuner) {
+		module_put(client_tuner->dev.driver->owner);
+		i2c_unregister_device(client_tuner);
+		port->i2c_client_tuner = NULL;
+	}
+
+	/* remove I2C client for demodulator */
+	client_demod = port->i2c_client_demod;
+	if (client_demod) {
+		module_put(client_demod->dev.driver->owner);
+		i2c_unregister_device(client_demod);
+		port->i2c_client_demod = NULL;
+	}
+
+	port->gate_ctrl = NULL;
+	vb2_dvb_dealloc_frontends(&port->frontends);
+	return -EINVAL;
+}
+
+int cx23885_dvb_register(struct cx23885_tsport *port)
+{
+
+	struct vb2_dvb_frontend *fe0;
+	struct cx23885_dev *dev = port->dev;
+	int err, i;
+
+	/* Here we need to allocate the correct number of frontends,
+	 * as reflected in the cards struct. The reality is that currently
+	 * no cx23885 boards support this - yet. But, if we don't modify this
+	 * code then the second frontend would never be allocated (later)
+	 * and fail with error before the attach in dvb_register().
+	 * Without these changes we risk an OOPS later. The changes here
+	 * are for safety, and should provide a good foundation for the
+	 * future addition of any multi-frontend cx23885 based boards.
+	 */
+	pr_info("%s() allocating %d frontend(s)\n", __func__,
+		port->num_frontends);
+
+	for (i = 1; i <= port->num_frontends; i++) {
+		struct vb2_queue *q;
+
+		if (vb2_dvb_alloc_frontend(
+			&port->frontends, i) == NULL) {
+			pr_err("%s() failed to alloc\n", __func__);
+			return -ENOMEM;
+		}
+
+		fe0 = vb2_dvb_get_frontend(&port->frontends, i);
+		if (!fe0)
+			return -EINVAL;
+
+		dprintk(1, "%s\n", __func__);
+		dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
+			dev->board,
+			dev->name,
+			dev->pci_bus,
+			dev->pci_slot);
+
+		/* dvb stuff */
+		/* We have to init the queue for each frontend on a port. */
+		pr_info("%s: cx23885 based dvb card\n", dev->name);
+		q = &fe0->dvb.dvbq;
+		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+		q->gfp_flags = GFP_DMA32;
+		q->min_buffers_needed = 2;
+		q->drv_priv = port;
+		q->buf_struct_size = sizeof(struct cx23885_buffer);
+		q->ops = &dvb_qops;
+		q->mem_ops = &vb2_dma_sg_memops;
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->lock = &dev->lock;
+		q->dev = &dev->pci->dev;
+
+		err = vb2_queue_init(q);
+		if (err < 0)
+			return err;
+	}
+	err = dvb_register(port);
+	if (err != 0)
+		pr_err("%s() dvb_register failed err = %d\n",
+		       __func__, err);
+
+	return err;
+}
+
+int cx23885_dvb_unregister(struct cx23885_tsport *port)
+{
+	struct vb2_dvb_frontend *fe0;
+	struct i2c_client *client;
+
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
+
+	if (fe0 && fe0->dvb.frontend)
+		vb2_dvb_unregister_bus(&port->frontends);
+
+	/* remove I2C client for CI */
+	client = port->i2c_client_ci;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for SEC */
+	client = port->i2c_client_sec;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for tuner */
+	client = port->i2c_client_tuner;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for demodulator */
+	client = port->i2c_client_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	switch (port->dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		netup_ci_exit(port);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		altera_ci_release(port->dev, port->nr);
+		break;
+	}
+
+	port->gate_ctrl = NULL;
+
+	return 0;
+}
diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c
new file mode 100644
index 0000000000..ac1c434e8e
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-f300.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Silicon Labs C8051F300 microcontroller.
+ *
+ * It is used for LNB power control in TeVii S470,
+ * TBS 6920 PCIe DVB-S2 cards.
+ *
+ * Microcontroller connected to cx23885 GPIO pins:
+ * GPIO0 - data		- P0.3 F300
+ * GPIO1 - reset	- P0.2 F300
+ * GPIO2 - clk		- P0.1 F300
+ * GPIO3 - busy		- P0.0 F300
+ *
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
+ */
+
+#include "cx23885.h"
+#include "cx23885-f300.h"
+
+#define F300_DATA	GPIO_0
+#define F300_RESET	GPIO_1
+#define F300_CLK	GPIO_2
+#define F300_BUSY	GPIO_3
+
+static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
+{
+	cx23885_gpio_enable(dev, line, 1);
+	if (lvl == 1)
+		cx23885_gpio_set(dev, line);
+	else
+		cx23885_gpio_clear(dev, line);
+}
+
+static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
+{
+	cx23885_gpio_enable(dev, line, 0);
+
+	return cx23885_gpio_get(dev, line);
+}
+
+static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
+{
+	u8 i;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+	}
+}
+
+static u8 f300_get_byte(struct cx23885_dev *dev)
+{
+	u8 i, dta = 0;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+		dta |= f300_get_line(dev, F300_DATA);/* msb first */
+
+	}
+
+	return dta;
+}
+
+static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+	u8 i, temp, ret = 0;
+
+	temp = buf[0];
+	for (i = 0; i < buf[0]; i++)
+		temp += buf[i + 1];
+	temp = (~temp + 1);/* get check sum */
+	buf[1 + buf[0]] = temp;
+
+	f300_set_line(dev, F300_RESET, 1);
+	f300_set_line(dev, F300_CLK, 1);
+	udelay(30);
+	f300_set_line(dev, F300_DATA, 1);
+	msleep(1);
+
+	/* question: */
+	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
+	msleep(1);
+
+	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+	msleep(1);
+
+	temp = buf[0];
+	temp += 2;
+	for (i = 0; i < temp; i++)
+		f300_send_byte(dev, buf[i]);
+
+	f300_set_line(dev, F300_RESET, 1);/* sent data over */
+	f300_set_line(dev, F300_DATA, 1);
+
+	/* answer: */
+	temp = 0;
+	for (i = 0; ((i < 8) & (temp == 0)); i++) {
+		msleep(1);
+		if (f300_get_line(dev, F300_BUSY) == 0)
+			temp = 1;
+	}
+
+	if (i > 7) {
+		pr_err("%s: timeout, the slave no response\n",
+								__func__);
+		ret = 1; /* timeout, the slave no response */
+	} else { /* the slave not busy, prepare for getting data */
+		f300_set_line(dev, F300_RESET, 0);/*ready...*/
+		msleep(1);
+		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
+		msleep(1);
+		temp = f300_get_byte(dev);/*get the data length */
+		if (temp > 14)
+			temp = 14;
+
+		for (i = 0; i < (temp + 1); i++)
+			f300_get_byte(dev);/* get data to empty buffer */
+
+		f300_set_line(dev, F300_RESET, 1);/* received data over */
+		f300_set_line(dev, F300_DATA, 1);
+	}
+
+	return ret;
+}
+
+int f300_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage)
+{
+	u8 buf[16];
+
+	buf[0] = 0x05;
+	buf[1] = 0x38;/* write port */
+	buf[2] = 0x01;/* A port, lnb power */
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		buf[3] = 0x01;/* power on */
+		buf[4] = 0x02;/* B port, H/V */
+		buf[5] = 0x00;/*13V v*/
+		break;
+	case SEC_VOLTAGE_18:
+		buf[3] = 0x01;
+		buf[4] = 0x02;
+		buf[5] = 0x01;/* 18V h*/
+		break;
+	case SEC_VOLTAGE_OFF:
+		buf[3] = 0x00;/* power off */
+		buf[4] = 0x00;
+		buf[5] = 0x00;
+		break;
+	}
+
+	return f300_xfer(fe, buf);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-f300.h b/drivers/media/pci/cx23885/cx23885-f300.h
new file mode 100644
index 0000000000..34aef3610a
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-f300.h
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+extern int f300_set_voltage(struct dvb_frontend *fe,
+			    enum fe_sec_voltage voltage);
diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c
new file mode 100644
index 0000000000..f51fad33dc
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-i2c.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include <media/v4l2-common.h>
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+static unsigned int i2c_scan;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (i2c_debug >= level)\
+		printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \
+			__func__, ##arg); \
+	} while (0)
+
+#define I2C_WAIT_DELAY 32
+#define I2C_WAIT_RETRY 64
+
+#define I2C_EXTEND  (1 << 3)
+#define I2C_NOSTOP  (1 << 4)
+
+static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x01;
+}
+
+static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x02 ? 1 : 0;
+}
+
+static int i2c_wait_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_is_busy(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
+			 const struct i2c_msg *msg, int joined_rlen)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 wdata, addr, ctrl;
+	int retval, cnt;
+
+	if (joined_rlen)
+		dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__,
+			msg->len, joined_rlen);
+	else
+		dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len);
+
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -ENXIO;
+
+		dprintk(1, "%s() returns 0\n", __func__);
+		return 0;
+	}
+
+
+	/* dev, reg + first byte */
+	addr = (msg->addr << 25) | msg->buf[0];
+	wdata = msg->buf[0];
+	ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+	if (msg->len > 1)
+		ctrl |= I2C_NOSTOP | I2C_EXTEND;
+	else if (joined_rlen)
+		ctrl |= I2C_NOSTOP;
+
+	cx_write(bus->reg_addr, addr);
+	cx_write(bus->reg_wdata, wdata);
+	cx_write(bus->reg_ctrl, ctrl);
+
+	if (!i2c_wait_done(i2c_adap))
+		goto eio;
+	if (i2c_debug) {
+		printk(KERN_DEBUG " <W %02x %02x", msg->addr << 1, msg->buf[0]);
+		if (!(ctrl & I2C_NOSTOP))
+			pr_cont(" >\n");
+	}
+
+	for (cnt = 1; cnt < msg->len; cnt++) {
+		/* following bytes */
+		wdata = msg->buf[cnt];
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+		if (cnt < msg->len - 1)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+		else if (joined_rlen)
+			ctrl |= I2C_NOSTOP;
+
+		cx_write(bus->reg_addr, addr);
+		cx_write(bus->reg_wdata, wdata);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		if (!i2c_wait_done(i2c_adap))
+			goto eio;
+		if (i2c_debug) {
+			pr_cont(" %02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				pr_cont(" >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+	if (i2c_debug)
+		pr_err(" ERR: %d\n", retval);
+	return retval;
+}
+
+static int i2c_readbytes(struct i2c_adapter *i2c_adap,
+			 const struct i2c_msg *msg, int joined)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 ctrl, cnt;
+	int retval;
+
+
+	if (i2c_debug && !joined)
+		dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len);
+
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -ENXIO;
+
+
+		dprintk(1, "%s() returns 0\n", __func__);
+		return 0;
+	}
+
+	if (i2c_debug) {
+		if (joined)
+			dprintk(1, " R");
+		else
+			dprintk(1, " <R %02x", (msg->addr << 1) + 1);
+	}
+
+	for (cnt = 0; cnt < msg->len; cnt++) {
+
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
+
+		if (cnt < msg->len - 1)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		if (!i2c_wait_done(i2c_adap))
+			goto eio;
+		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
+		if (i2c_debug) {
+			dprintk(1, " %02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				dprintk(1, " >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+	if (i2c_debug)
+		pr_err(" ERR: %d\n", retval);
+	return retval;
+}
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs, int num)
+{
+	int i, retval = 0;
+
+	dprintk(1, "%s(num = %d)\n", __func__, num);
+
+	for (i = 0 ; i < num; i++) {
+		dprintk(1, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+			__func__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read */
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 0);
+		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* write then read from same address */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i],
+					       msgs[i + 1].len);
+			if (retval < 0)
+				goto err;
+			i++;
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 1);
+		} else {
+			/* write */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i], 0);
+		}
+		if (retval < 0)
+			goto err;
+	}
+	return num;
+
+ err:
+	return retval;
+}
+
+static u32 cx23885_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm cx23885_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.functionality	= cx23885_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_adapter cx23885_i2c_adap_template = {
+	.name              = "cx23885",
+	.owner             = THIS_MODULE,
+	.algo              = &cx23885_i2c_algo_template,
+};
+
+static const struct i2c_client cx23885_i2c_client_template = {
+	.name	= "cx23885 internal",
+};
+
+static char *i2c_devs[128] = {
+	[0x10 >> 1] = "tda10048",
+	[0x12 >> 1] = "dib7000pc",
+	[0x1c >> 1] = "lgdt3303",
+	[0x80 >> 1] = "cs3308",
+	[0x82 >> 1] = "cs3308",
+	[0x86 >> 1] = "tda9887",
+	[0x32 >> 1] = "cx24227",
+	[0x88 >> 1] = "cx25837",
+	[0x84 >> 1] = "tda8295",
+	[0x98 >> 1] = "flatiron",
+	[0xa0 >> 1] = "eeprom",
+	[0xc0 >> 1] = "tuner/mt2131/tda8275",
+	[0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028",
+	[0xc8 >> 1] = "tuner/xc3028L",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i, rc;
+
+	for (i = 0; i < 128; i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c, &buf, 0);
+		if (rc < 0)
+			continue;
+		pr_info("%s: i2c scan: found device @ 0x%04x  [%s]\n",
+		       name, i, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+/* init + register i2c adapter */
+int cx23885_i2c_register(struct cx23885_i2c *bus)
+{
+	struct cx23885_dev *dev = bus->dev;
+
+	dprintk(1, "%s(bus = %d)\n", __func__, bus->nr);
+
+	bus->i2c_adap = cx23885_i2c_adap_template;
+	bus->i2c_client = cx23885_i2c_client_template;
+	bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+	strscpy(bus->i2c_adap.name, bus->dev->name,
+		sizeof(bus->i2c_adap.name));
+
+	bus->i2c_adap.algo_data = bus;
+	i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
+	i2c_add_adapter(&bus->i2c_adap);
+
+	bus->i2c_client.adapter = &bus->i2c_adap;
+
+	if (0 == bus->i2c_rc) {
+		dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr);
+		if (i2c_scan) {
+			pr_info("%s: scan bus %d:\n",
+					dev->name, bus->nr);
+			do_i2c_scan(dev->name, &bus->i2c_client);
+		}
+	} else
+		pr_warn("%s: i2c bus %d register FAILED\n",
+			dev->name, bus->nr);
+
+	/* Instantiate the IR receiver device, if present */
+	if (0 == bus->i2c_rc) {
+		struct i2c_board_info info;
+		static const unsigned short addr_list[] = {
+			0x6b, I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strscpy(info.type, "ir_video", I2C_NAME_SIZE);
+		/* Use quick read command for probe, some IR chips don't
+		 * support writes */
+		i2c_new_scanned_device(&bus->i2c_adap, &info, addr_list,
+				       i2c_probe_func_quick_read);
+	}
+
+	return bus->i2c_rc;
+}
+
+int cx23885_i2c_unregister(struct cx23885_i2c *bus)
+{
+	i2c_del_adapter(&bus->i2c_adap);
+	return 0;
+}
+
+void cx23885_av_clk(struct cx23885_dev *dev, int enable)
+{
+	/* write 0 to bus 2 addr 0x144 via i2x_xfer() */
+	char buffer[3];
+	struct i2c_msg msg;
+	dprintk(1, "%s(enabled = %d)\n", __func__, enable);
+
+	/* Register 0x144 */
+	buffer[0] = 0x01;
+	buffer[1] = 0x44;
+	if (enable == 1)
+		buffer[2] = 0x05;
+	else
+		buffer[2] = 0x00;
+
+	msg.addr = 0x44;
+	msg.flags = I2C_M_TEN;
+	msg.len = 3;
+	msg.buf = buffer;
+
+	i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
new file mode 100644
index 0000000000..d2e84c6457
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared remote control input device
+ *
+ *  Most of this file is
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  However, the cx23885_input_{init,fini} functions contained herein are
+ *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
+ *
+ *  Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+ *  Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ *		       Markus Rechberger <mrechberger@gmail.com>
+ *		       Mauro Carvalho Chehab <mchehab@kernel.org>
+ *		       Sascha Sommer <saschasommer@freenet.de>
+ *  Copyright (C) 2004, 2005 Chris Pascoe
+ *  Copyright (C) 2003, 2004 Gerd Knorr
+ *  Copyright (C) 2003 Pavel Machek
+ */
+
+#include "cx23885.h"
+#include "cx23885-input.h"
+
+#include <linux/slab.h>
+#include <media/rc-core.h>
+#include <media/v4l2-subdev.h>
+
+#define MODULE_NAME "cx23885"
+
+static void cx23885_input_process_measurements(struct cx23885_dev *dev,
+					       bool overrun)
+{
+	struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
+
+	ssize_t num;
+	int count, i;
+	bool handle = false;
+	struct ir_raw_event ir_core_event[64];
+
+	do {
+		num = 0;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+				 sizeof(ir_core_event), &num);
+
+		count = num / sizeof(struct ir_raw_event);
+
+		for (i = 0; i < count; i++) {
+			ir_raw_event_store(kernel_ir->rc,
+					   &ir_core_event[i]);
+			handle = true;
+		}
+	} while (num != 0);
+
+	if (overrun)
+		ir_raw_event_overflow(kernel_ir->rc);
+	else if (handle)
+		ir_raw_event_handle(kernel_ir->rc);
+}
+
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+{
+	struct v4l2_subdev_ir_parameters params;
+	int overrun, data_available;
+
+	if (dev->sd_ir == NULL || events == 0)
+		return;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		/*
+		 * The only boards we handle right now.  However other boards
+		 * using the CX2388x integrated IR controller should be similar
+		 */
+		break;
+	default:
+		return;
+	}
+
+	overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
+			    V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
+
+	data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
+				   V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, stop the device */
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+		params.enable = false;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+
+	if (data_available)
+		cx23885_input_process_measurements(dev, overrun);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, clear & restart the device */
+		params.enable = true;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+}
+
+static int cx23885_input_ir_start(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	atomic_set(&dev->ir_input_stopping, 0);
+
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		*/
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for baseband compatible with both RC-5 and RC-6A */
+		params.modulation = false;
+		/* RC-5:  2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
+		/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
+		params.max_pulse_width = 3333333; /* ns */
+		/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+		/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+		params.noise_filter_min_width = 333333; /* ns */
+		/*
+		 * This board has inverted receive sense:
+		 * mark is received as low logic level;
+		 * falling edges are detected as rising edges; etc.
+		 */
+		params.invert_level = true;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		 */
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for a standard NEC protocol */
+		params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+		params.carrier_range_lower = 33000; /* Hz */
+		params.carrier_range_upper = 43000; /* Hz */
+		params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+		/*
+		 * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+		 * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+		 */
+		params.max_pulse_width = 12378022; /* ns */
+
+		/*
+		 * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+		 * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+		 */
+		params.noise_filter_min_width = 351648; /* ns */
+
+		params.modulation = false;
+		params.invert_level = true;
+		break;
+	}
+	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	return 0;
+}
+
+static int cx23885_input_ir_open(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx == NULL)
+		return -ENODEV;
+
+	return cx23885_input_ir_start(kernel_ir->cx);
+}
+
+static void cx23885_input_ir_stop(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return;
+
+	/*
+	 * Stop the sd_ir subdevice from generating notifications and
+	 * scheduling work.
+	 * It is shutdown this way in order to mitigate a race with
+	 * cx23885_input_rx_work_handler() in the overrun case, which could
+	 * re-enable the subdevice.
+	 */
+	atomic_set(&dev->ir_input_stopping, 1);
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	while (params.shutdown == false) {
+		params.enable = false;
+		params.interrupt_enable = false;
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	}
+	flush_work(&dev->cx25840_work);
+	flush_work(&dev->ir_rx_work);
+	flush_work(&dev->ir_tx_work);
+}
+
+static void cx23885_input_ir_close(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx != NULL)
+		cx23885_input_ir_stop(kernel_ir->cx);
+}
+
+int cx23885_input_init(struct cx23885_dev *dev)
+{
+	struct cx23885_kernel_ir *kernel_ir;
+	struct rc_dev *rc;
+	char *rc_map;
+	u64 allowed_protos;
+
+	int ret;
+
+	/*
+	 * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
+	 * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
+	 */
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		/* Integrated CX2388[58] IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		/* The grey Hauppauge RC-5 remote */
+		rc_map = RC_MAP_HAUPPAUGE;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		/* The grey Terratec remote with orange buttons */
+		rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TEVII_NEC;
+		break;
+	case CX23885_BOARD_MYGICA_X8507:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
+		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TBS_NEC;
+		break;
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		rc_map = RC_MAP_DVBSKY;
+		break;
+	case CX23885_BOARD_TT_CT2_4500_CI:
+		/* Integrated CX23885 IR controller */
+		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
+		rc_map = RC_MAP_TT_1500;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* cx23885 board instance kernel IR state */
+	kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
+	if (kernel_ir == NULL)
+		return -ENOMEM;
+
+	kernel_ir->cx = dev;
+	kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
+				    cx23885_boards[dev->board].name);
+	if (!kernel_ir->name) {
+		ret = -ENOMEM;
+		goto err_out_free;
+	}
+
+	kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
+				    pci_name(dev->pci));
+	if (!kernel_ir->phys) {
+		ret = -ENOMEM;
+		goto err_out_free_name;
+	}
+
+	/* input device */
+	rc = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!rc) {
+		ret = -ENOMEM;
+		goto err_out_free_phys;
+	}
+
+	kernel_ir->rc = rc;
+	rc->device_name = kernel_ir->name;
+	rc->input_phys = kernel_ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
+	if (dev->pci->subsystem_vendor) {
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
+	} else {
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
+	}
+	rc->dev.parent = &dev->pci->dev;
+	rc->allowed_protocols = allowed_protos;
+	rc->priv = kernel_ir;
+	rc->open = cx23885_input_ir_open;
+	rc->close = cx23885_input_ir_close;
+	rc->map_name = rc_map;
+	rc->driver_name = MODULE_NAME;
+
+	/* Go */
+	dev->kernel_ir = kernel_ir;
+	ret = rc_register_device(rc);
+	if (ret)
+		goto err_out_stop;
+
+	return 0;
+
+err_out_stop:
+	cx23885_input_ir_stop(dev);
+	dev->kernel_ir = NULL;
+	rc_free_device(rc);
+err_out_free_phys:
+	kfree(kernel_ir->phys);
+err_out_free_name:
+	kfree(kernel_ir->name);
+err_out_free:
+	kfree(kernel_ir);
+	return ret;
+}
+
+void cx23885_input_fini(struct cx23885_dev *dev)
+{
+	/* Always stop the IR hardware from generating interrupts */
+	cx23885_input_ir_stop(dev);
+
+	if (dev->kernel_ir == NULL)
+		return;
+	rc_unregister_device(dev->kernel_ir->rc);
+	kfree(dev->kernel_ir->phys);
+	kfree(dev->kernel_ir->name);
+	kfree(dev->kernel_ir);
+	dev->kernel_ir = NULL;
+}
diff --git a/drivers/media/pci/cx23885/cx23885-input.h b/drivers/media/pci/cx23885/cx23885-input.h
new file mode 100644
index 0000000000..5b261e0ee4
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-input.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared remote control input device
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23885_INPUT_H_
+#define _CX23885_INPUT_H_
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events);
+
+int cx23885_input_init(struct cx23885_dev *dev);
+void cx23885_input_fini(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.c b/drivers/media/pci/cx23885/cx23885-ioctl.c
new file mode 100644
index 0000000000..a8ccad07cf
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ioctl.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Various common ioctl() support functions
+ *
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
+ */
+
+#include "cx23885.h"
+#include "cx23885-ioctl.h"
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+int cx23885_g_chip_info(struct file *file, void *fh,
+			 struct v4l2_dbg_chip_info *chip)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (chip->match.addr > 1)
+		return -EINVAL;
+	if (chip->match.addr == 1) {
+		if (dev->v4l_device == NULL)
+			return -EINVAL;
+		strscpy(chip->name, "cx23417", sizeof(chip->name));
+	} else {
+		strscpy(chip->name, dev->v4l2_dev.name, sizeof(chip->name));
+	}
+	return 0;
+}
+
+static int cx23417_g_register(struct cx23885_dev *dev,
+			      struct v4l2_dbg_register *reg)
+{
+	u32 value;
+
+	if (dev->v4l_device == NULL)
+		return -EINVAL;
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+		return -EINVAL;
+
+	if (mc417_register_read(dev, (u16) reg->reg, &value))
+		return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+
+	reg->size = 4;
+	reg->val = value;
+	return 0;
+}
+
+int cx23885_g_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (reg->match.addr > 1)
+		return -EINVAL;
+	if (reg->match.addr)
+		return cx23417_g_register(dev, reg);
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+		return -EINVAL;
+
+	reg->size = 4;
+	reg->val = cx_read(reg->reg);
+	return 0;
+}
+
+static int cx23417_s_register(struct cx23885_dev *dev,
+			      const struct v4l2_dbg_register *reg)
+{
+	if (dev->v4l_device == NULL)
+		return -EINVAL;
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+		return -EINVAL;
+
+	if (mc417_register_write(dev, (u16) reg->reg, (u32) reg->val))
+		return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+	return 0;
+}
+
+int cx23885_s_register(struct file *file, void *fh,
+		       const struct v4l2_dbg_register *reg)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (reg->match.addr > 1)
+		return -EINVAL;
+	if (reg->match.addr)
+		return cx23417_s_register(dev, reg);
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+		return -EINVAL;
+
+	cx_write(reg->reg, reg->val);
+	return 0;
+}
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.h b/drivers/media/pci/cx23885/cx23885-ioctl.h
new file mode 100644
index 0000000000..14bfe9e4ec
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ioctl.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Various common ioctl() support functions
+ *
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23885_IOCTL_H_
+#define _CX23885_IOCTL_H_
+
+int cx23885_g_chip_info(struct file *file, void *fh,
+			 struct v4l2_dbg_chip_info *chip);
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+int cx23885_g_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg);
+
+
+int cx23885_s_register(struct file *file, void *fh,
+		       const struct v4l2_dbg_register *reg);
+
+#endif
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ir.c b/drivers/media/pci/cx23885/cx23885-ir.c
new file mode 100644
index 0000000000..45befc2728
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ir.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#include "cx23885.h"
+#include "cx23885-ir.h"
+#include "cx23885-input.h"
+
+#include <media/v4l2-device.h>
+
+#define CX23885_IR_RX_FIFO_SERVICE_REQ		0
+#define CX23885_IR_RX_END_OF_RX_DETECTED	1
+#define CX23885_IR_RX_HW_FIFO_OVERRUN		2
+#define CX23885_IR_RX_SW_FIFO_OVERRUN		3
+
+#define CX23885_IR_TX_FIFO_SERVICE_REQ		0
+
+
+void cx23885_ir_rx_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			     container_of(work, struct cx23885_dev, ir_rx_work);
+	u32 events = 0;
+	unsigned long *notifications = &dev->ir_rx_notifications;
+
+	if (test_and_clear_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications))
+		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+	if (test_and_clear_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications))
+		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+	if (test_and_clear_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications))
+		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+	if (test_and_clear_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications))
+		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+
+	if (events == 0)
+		return;
+
+	if (dev->kernel_ir)
+		cx23885_input_rx_work_handler(dev, events);
+}
+
+void cx23885_ir_tx_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			     container_of(work, struct cx23885_dev, ir_tx_work);
+	u32 events = 0;
+	unsigned long *notifications = &dev->ir_tx_notifications;
+
+	if (test_and_clear_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications))
+		events |= V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+
+	if (events == 0)
+		return;
+
+}
+
+/* Possibly called in an IRQ context */
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+	unsigned long *notifications = &dev->ir_rx_notifications;
+
+	if (events & V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ)
+		set_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED)
+		set_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN)
+		set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
+		set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_rx_work_handler(&dev->ir_rx_work);
+	else
+		schedule_work(&dev->ir_rx_work);
+}
+
+/* Possibly called in an IRQ context */
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+	unsigned long *notifications = &dev->ir_tx_notifications;
+
+	if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
+		set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_tx_work_handler(&dev->ir_tx_work);
+	else
+		schedule_work(&dev->ir_tx_work);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-ir.h b/drivers/media/pci/cx23885/cx23885-ir.h
new file mode 100644
index 0000000000..32b9378b2a
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ir.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23885_IR_H_
+#define _CX23885_IR_H_
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+
+void cx23885_ir_rx_work_handler(struct work_struct *work);
+void cx23885_ir_tx_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-reg.h b/drivers/media/pci/cx23885/cx23885-reg.h
new file mode 100644
index 0000000000..125a79a8c5
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-reg.h
@@ -0,0 +1,452 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#ifndef _CX23885_REG_H_
+#define _CX23885_REG_H_
+
+/*
+Address Map
+0x00000000 -> 0x00009000   TX SRAM  (Fifos)
+0x00010000 -> 0x00013c00   RX SRAM  CMDS + CDT
+
+EACH CMDS struct is 0x80 bytes long
+
+DMAx_PTR1 = 0x03040 address of first cluster
+DMAx_PTR2 = 0x10600 address of the CDT
+DMAx_CNT1 = cluster size in (bytes >> 4) -1
+DMAx_CNT2 = total cdt size for all entries >> 3
+
+Cluster Descriptor entry = 4 DWORDS
+ DWORD 0 -> ptr to cluster
+ DWORD 1 Reserved
+ DWORD 2 Reserved
+ DWORD 3 Reserved
+
+Channel manager Data Structure entry = 20 DWORD
+  0  IntialProgramCounterLow
+  1  IntialProgramCounterHigh
+  2  ClusterDescriptorTableBase
+  3  ClusterDescriptorTableSize
+  4  InstructionQueueBase
+  5  InstructionQueueSize
+...  Reserved
+ 19  Reserved
+*/
+
+/* Risc Instructions */
+#define RISC_CNT_INC		 0x00010000
+#define RISC_CNT_RESET		 0x00030000
+#define RISC_IRQ1		 0x01000000
+#define RISC_IRQ2		 0x02000000
+#define RISC_EOL		 0x04000000
+#define RISC_SOL		 0x08000000
+#define RISC_WRITE		 0x10000000
+#define RISC_SKIP		 0x20000000
+#define RISC_JUMP		 0x70000000
+#define RISC_SYNC		 0x80000000
+#define RISC_RESYNC		 0x80008000
+#define RISC_READ		 0x90000000
+#define RISC_WRITERM		 0xB0000000
+#define RISC_WRITECM		 0xC0000000
+#define RISC_WRITECR		 0xD0000000
+#define RISC_WRITEC		 0x50000000
+#define RISC_READC		 0xA0000000
+
+
+/* Audio and Video Core */
+#define HOST_REG1		0x00000000
+#define HOST_REG2		0x00000001
+#define HOST_REG3		0x00000002
+
+/* Chip Configuration Registers */
+#define CHIP_CTRL		0x00000100
+#define AFE_CTRL		0x00000104
+#define VID_PLL_INT_POST	0x00000108
+#define VID_PLL_FRAC		0x0000010C
+#define AUX_PLL_INT_POST	0x00000110
+#define AUX_PLL_FRAC		0x00000114
+#define SYS_PLL_INT_POST	0x00000118
+#define SYS_PLL_FRAC		0x0000011C
+#define PIN_CTRL		0x00000120
+#define AUD_IO_CTRL		0x00000124
+#define AUD_LOCK1		0x00000128
+#define AUD_LOCK2		0x0000012C
+#define POWER_CTRL		0x00000130
+#define AFE_DIAG_CTRL1		0x00000134
+#define AFE_DIAG_CTRL3		0x0000013C
+#define PLL_DIAG_CTRL		0x00000140
+#define AFE_CLK_OUT_CTRL	0x00000144
+#define DLL1_DIAG_CTRL		0x0000015C
+
+/* GPIO[23:19] Output Enable */
+#define GPIO2_OUT_EN_REG	0x00000160
+/* GPIO[23:19] Data Registers */
+#define GPIO2			0x00000164
+
+#define IFADC_CTRL		0x00000180
+
+/* Infrared Remote Registers */
+#define IR_CNTRL_REG	0x00000200
+#define IR_TXCLK_REG	0x00000204
+#define IR_RXCLK_REG	0x00000208
+#define IR_CDUTY_REG	0x0000020C
+#define IR_STAT_REG	0x00000210
+#define IR_IRQEN_REG	0x00000214
+#define IR_FILTR_REG	0x00000218
+#define IR_FIFO_REG	0x0000023C
+
+/* Video Decoder Registers */
+#define MODE_CTRL		0x00000400
+#define OUT_CTRL1		0x00000404
+#define OUT_CTRL2		0x00000408
+#define GEN_STAT		0x0000040C
+#define INT_STAT_MASK		0x00000410
+#define LUMA_CTRL		0x00000414
+#define HSCALE_CTRL		0x00000418
+#define VSCALE_CTRL		0x0000041C
+#define CHROMA_CTRL		0x00000420
+#define VBI_LINE_CTRL1		0x00000424
+#define VBI_LINE_CTRL2		0x00000428
+#define VBI_LINE_CTRL3		0x0000042C
+#define VBI_LINE_CTRL4		0x00000430
+#define VBI_LINE_CTRL5		0x00000434
+#define VBI_FC_CFG		0x00000438
+#define VBI_MISC_CFG1		0x0000043C
+#define VBI_MISC_CFG2		0x00000440
+#define VBI_PAY1		0x00000444
+#define VBI_PAY2		0x00000448
+#define VBI_CUST1_CFG1		0x0000044C
+#define VBI_CUST1_CFG2		0x00000450
+#define VBI_CUST1_CFG3		0x00000454
+#define VBI_CUST2_CFG1		0x00000458
+#define VBI_CUST2_CFG2		0x0000045C
+#define VBI_CUST2_CFG3		0x00000460
+#define VBI_CUST3_CFG1		0x00000464
+#define VBI_CUST3_CFG2		0x00000468
+#define VBI_CUST3_CFG3		0x0000046C
+#define HORIZ_TIM_CTRL		0x00000470
+#define VERT_TIM_CTRL		0x00000474
+#define SRC_COMB_CFG		0x00000478
+#define CHROMA_VBIOFF_CFG	0x0000047C
+#define FIELD_COUNT		0x00000480
+#define MISC_TIM_CTRL		0x00000484
+#define DFE_CTRL1		0x00000488
+#define DFE_CTRL2		0x0000048C
+#define DFE_CTRL3		0x00000490
+#define PLL_CTRL		0x00000494
+#define HTL_CTRL		0x00000498
+#define COMB_CTRL		0x0000049C
+#define CRUSH_CTRL		0x000004A0
+#define SOFT_RST_CTRL		0x000004A4
+#define CX885_VERSION		0x000004B4
+#define VBI_PASS_CTRL		0x000004BC
+
+/* Audio Decoder Registers */
+/* 8051 Configuration */
+#define DL_CTL		0x00000800
+#define STD_DET_STATUS	0x00000804
+#define STD_DET_CTL	0x00000808
+#define DW8051_INT	0x0000080C
+#define GENERAL_CTL	0x00000810
+#define AAGC_CTL	0x00000814
+#define DEMATRIX_CTL	0x000008CC
+#define PATH1_CTL1	0x000008D0
+#define PATH1_VOL_CTL	0x000008D4
+#define PATH1_EQ_CTL	0x000008D8
+#define PATH1_SC_CTL	0x000008DC
+#define PATH2_CTL1	0x000008E0
+#define PATH2_VOL_CTL	0x000008E4
+#define PATH2_EQ_CTL	0x000008E8
+#define PATH2_SC_CTL	0x000008EC
+
+/* Sample Rate Converter */
+#define SRC_CTL		0x000008F0
+#define SRC_LF_COEF	0x000008F4
+#define SRC1_CTL	0x000008F8
+#define SRC2_CTL	0x000008FC
+#define SRC3_CTL	0x00000900
+#define SRC4_CTL	0x00000904
+#define SRC5_CTL	0x00000908
+#define SRC6_CTL	0x0000090C
+#define BAND_OUT_SEL	0x00000910
+#define I2S_N_CTL	0x00000914
+#define I2S_OUT_CTL	0x00000918
+#define AUTOCONFIG_REG	0x000009C4
+
+/* Audio ADC Registers */
+#define DSM_CTRL1	0x00000000
+#define DSM_CTRL2	0x00000001
+#define CHP_EN_CTRL	0x00000002
+#define CHP_CLK_CTRL1	0x00000004
+#define CHP_CLK_CTRL2	0x00000005
+#define BG_REF_CTRL	0x00000006
+#define SD2_SW_CTRL1	0x00000008
+#define SD2_SW_CTRL2	0x00000009
+#define SD2_BIAS_CTRL	0x0000000A
+#define AMP_BIAS_CTRL	0x0000000C
+#define CH_PWR_CTRL1	0x0000000E
+#define FLD_CH_SEL      (1 << 3)
+#define CH_PWR_CTRL2	0x0000000F
+#define DSM_STATUS1	0x00000010
+#define DSM_STATUS2	0x00000011
+#define DIG_CTL1	0x00000012
+#define DIG_CTL2	0x00000013
+#define I2S_TX_CFG	0x0000001A
+
+#define DEV_CNTRL2	0x00040000
+
+#define PCI_MSK_IR        (1 << 28)
+#define PCI_MSK_AV_CORE   (1 << 27)
+#define PCI_MSK_GPIO1     (1 << 24)
+#define PCI_MSK_GPIO0     (1 << 23)
+#define PCI_MSK_APB_DMA   (1 << 12)
+#define PCI_MSK_AL_WR     (1 << 11)
+#define PCI_MSK_AL_RD     (1 << 10)
+#define PCI_MSK_RISC_WR   (1 <<  9)
+#define PCI_MSK_RISC_RD   (1 <<  8)
+#define PCI_MSK_AUD_EXT   (1 <<  4)
+#define PCI_MSK_AUD_INT   (1 <<  3)
+#define PCI_MSK_VID_C     (1 <<  2)
+#define PCI_MSK_VID_B     (1 <<  1)
+#define PCI_MSK_VID_A      1
+#define PCI_INT_MSK	0x00040010
+
+#define PCI_INT_STAT	0x00040014
+#define PCI_INT_MSTAT	0x00040018
+
+#define VID_A_INT_MSK	0x00040020
+#define VID_A_INT_STAT	0x00040024
+#define VID_A_INT_MSTAT	0x00040028
+#define VID_A_INT_SSTAT	0x0004002C
+
+#define VID_B_INT_MSK	0x00040030
+#define VID_B_MSK_BAD_PKT     (1 << 20)
+#define VID_B_MSK_VBI_OPC_ERR (1 << 17)
+#define VID_B_MSK_OPC_ERR     (1 << 16)
+#define VID_B_MSK_VBI_SYNC    (1 << 13)
+#define VID_B_MSK_SYNC        (1 << 12)
+#define VID_B_MSK_VBI_OF      (1 <<  9)
+#define VID_B_MSK_OF          (1 <<  8)
+#define VID_B_MSK_VBI_RISCI2  (1 <<  5)
+#define VID_B_MSK_RISCI2      (1 <<  4)
+#define VID_B_MSK_VBI_RISCI1  (1 <<  1)
+#define VID_B_MSK_RISCI1       1
+#define VID_B_INT_STAT	0x00040034
+#define VID_B_INT_MSTAT	0x00040038
+#define VID_B_INT_SSTAT	0x0004003C
+
+#define VID_B_MSK_BAD_PKT (1 << 20)
+#define VID_B_MSK_OPC_ERR (1 << 16)
+#define VID_B_MSK_SYNC    (1 << 12)
+#define VID_B_MSK_OF      (1 <<  8)
+#define VID_B_MSK_RISCI2  (1 <<  4)
+#define VID_B_MSK_RISCI1   1
+
+#define VID_C_MSK_BAD_PKT (1 << 20)
+#define VID_C_MSK_OPC_ERR (1 << 16)
+#define VID_C_MSK_SYNC    (1 << 12)
+#define VID_C_MSK_OF      (1 <<  8)
+#define VID_C_MSK_RISCI2  (1 <<  4)
+#define VID_C_MSK_RISCI1   1
+
+/* A superset for testing purposes */
+#define VID_BC_MSK_BAD_PKT (1 << 20)
+#define VID_BC_MSK_OPC_ERR (1 << 16)
+#define VID_BC_MSK_SYNC    (1 << 12)
+#define VID_BC_MSK_OF      (1 <<  8)
+#define VID_BC_MSK_VBI_RISCI2 (1 <<  5)
+#define VID_BC_MSK_RISCI2  (1 <<  4)
+#define VID_BC_MSK_VBI_RISCI1 (1 <<  1)
+#define VID_BC_MSK_RISCI1   1
+
+#define VID_C_INT_MSK	0x00040040
+#define VID_C_INT_STAT	0x00040044
+#define VID_C_INT_MSTAT	0x00040048
+#define VID_C_INT_SSTAT	0x0004004C
+
+#define AUDIO_INT_INT_MSK	0x00040050
+#define AUDIO_INT_INT_STAT	0x00040054
+#define AUDIO_INT_INT_MSTAT	0x00040058
+#define AUDIO_INT_INT_SSTAT	0x0004005C
+
+#define AUDIO_EXT_INT_MSK	0x00040060
+#define AUDIO_EXT_INT_STAT	0x00040064
+#define AUDIO_EXT_INT_MSTAT	0x00040068
+#define AUDIO_EXT_INT_SSTAT	0x0004006C
+
+/* Bits [7:0] set in both TC_REQ and TC_REQ_SET
+ * indicate a stall in the RISC engine for a
+ * particular rider traffic class. This causes
+ * the 885 and 888 bridges (unknown about 887)
+ * to become inoperable. Setting bits in
+ * TC_REQ_SET resets the corresponding bits
+ * in TC_REQ (and TC_REQ_SET) allowing
+ * operation to continue.
+ */
+#define TC_REQ		0x00040090
+#define TC_REQ_SET	0x00040094
+
+#define RDR_CFG0	0x00050000
+#define RDR_CFG1	0x00050004
+#define RDR_CFG2	0x00050008
+#define RDR_RDRCTL1	0x0005030c
+#define RDR_TLCTL0	0x00050318
+
+/* APB DMAC Current Buffer Pointer */
+#define DMA1_PTR1	0x00100000
+#define DMA2_PTR1	0x00100004
+#define DMA3_PTR1	0x00100008
+#define DMA4_PTR1	0x0010000C
+#define DMA5_PTR1	0x00100010
+#define DMA6_PTR1	0x00100014
+#define DMA7_PTR1	0x00100018
+#define DMA8_PTR1	0x0010001C
+
+/* APB DMAC Current Table Pointer */
+#define DMA1_PTR2	0x00100040
+#define DMA2_PTR2	0x00100044
+#define DMA3_PTR2	0x00100048
+#define DMA4_PTR2	0x0010004C
+#define DMA5_PTR2	0x00100050
+#define DMA6_PTR2	0x00100054
+#define DMA7_PTR2	0x00100058
+#define DMA8_PTR2	0x0010005C
+
+/* APB DMAC Buffer Limit */
+#define DMA1_CNT1	0x00100080
+#define DMA2_CNT1	0x00100084
+#define DMA3_CNT1	0x00100088
+#define DMA4_CNT1	0x0010008C
+#define DMA5_CNT1	0x00100090
+#define DMA6_CNT1	0x00100094
+#define DMA7_CNT1	0x00100098
+#define DMA8_CNT1	0x0010009C
+
+/* APB DMAC Table Size */
+#define DMA1_CNT2	0x001000C0
+#define DMA2_CNT2	0x001000C4
+#define DMA3_CNT2	0x001000C8
+#define DMA4_CNT2	0x001000CC
+#define DMA5_CNT2	0x001000D0
+#define DMA6_CNT2	0x001000D4
+#define DMA7_CNT2	0x001000D8
+#define DMA8_CNT2	0x001000DC
+
+/* Timer Counters */
+#define TM_CNT_LDW	0x00110000
+#define TM_CNT_UW	0x00110004
+#define TM_LMT_LDW	0x00110008
+#define TM_LMT_UW	0x0011000C
+
+/* GPIO */
+#define GP0_IO		0x00110010
+#define GPIO_ISM	0x00110014
+#define SOFT_RESET	0x0011001C
+
+/* GPIO (417 Microsoftcontroller) RW Data */
+#define MC417_RWD	0x00110020
+
+/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */
+#define MC417_OEN	0x00110024
+#define MC417_CTL	0x00110028
+#define ALT_PIN_OUT_SEL 0x0011002C
+#define CLK_DELAY	0x00110048
+#define PAD_CTRL	0x0011004C
+
+/* Video A Interface */
+#define VID_A_GPCNT		0x00130020
+#define VBI_A_GPCNT		0x00130024
+#define VID_A_GPCNT_CTL		0x00130030
+#define VBI_A_GPCNT_CTL		0x00130034
+#define VID_A_DMA_CTL		0x00130040
+#define VID_A_VIP_CTRL		0x00130080
+#define VID_A_PIXEL_FRMT	0x00130084
+#define VID_A_VBI_CTRL		0x00130088
+
+/* Video B Interface */
+#define VID_B_DMA		0x00130100
+#define VBI_B_DMA		0x00130108
+#define VID_B_GPCNT		0x00130120
+#define VBI_B_GPCNT		0x00130124
+#define VID_B_GPCNT_CTL		0x00130134
+#define VBI_B_GPCNT_CTL		0x00130138
+#define VID_B_DMA_CTL		0x00130140
+#define VID_B_SRC_SEL		0x00130144
+#define VID_B_LNGTH		0x00130150
+#define VID_B_HW_SOP_CTL	0x00130154
+#define VID_B_GEN_CTL		0x00130158
+#define VID_B_BD_PKT_STATUS	0x0013015C
+#define VID_B_SOP_STATUS	0x00130160
+#define VID_B_FIFO_OVFL_STAT	0x00130164
+#define VID_B_VLD_MISC		0x00130168
+#define VID_B_TS_CLK_EN		0x0013016C
+#define VID_B_VIP_CTRL		0x00130180
+#define VID_B_PIXEL_FRMT	0x00130184
+
+/* Video C Interface */
+#define VID_C_DMA		0x00130200
+#define VBI_C_DMA		0x00130208
+#define VID_C_GPCNT		0x00130220
+#define VID_C_GPCNT_CTL		0x00130230
+#define VBI_C_GPCNT_CTL		0x00130234
+#define VID_C_DMA_CTL		0x00130240
+#define VID_C_LNGTH		0x00130250
+#define VID_C_HW_SOP_CTL	0x00130254
+#define VID_C_GEN_CTL		0x00130258
+#define VID_C_BD_PKT_STATUS	0x0013025C
+#define VID_C_SOP_STATUS	0x00130260
+#define VID_C_FIFO_OVFL_STAT	0x00130264
+#define VID_C_VLD_MISC		0x00130268
+#define VID_C_TS_CLK_EN		0x0013026C
+
+/* Internal Audio Interface */
+#define AUD_INT_A_GPCNT		0x00140020
+#define AUD_INT_B_GPCNT		0x00140024
+#define AUD_INT_A_GPCNT_CTL	0x00140030
+#define AUD_INT_B_GPCNT_CTL	0x00140034
+#define AUD_INT_DMA_CTL		0x00140040
+#define AUD_INT_A_LNGTH		0x00140050
+#define AUD_INT_B_LNGTH		0x00140054
+#define AUD_INT_A_MODE		0x00140058
+#define AUD_INT_B_MODE		0x0014005C
+
+/* External Audio Interface */
+#define AUD_EXT_DMA		0x00140100
+#define AUD_EXT_GPCNT		0x00140120
+#define AUD_EXT_GPCNT_CTL	0x00140130
+#define AUD_EXT_DMA_CTL		0x00140140
+#define AUD_EXT_LNGTH		0x00140150
+#define AUD_EXT_A_MODE		0x00140158
+
+/* I2C Bus 1 */
+#define I2C1_ADDR	0x00180000
+#define I2C1_WDATA	0x00180004
+#define I2C1_CTRL	0x00180008
+#define I2C1_RDATA	0x0018000C
+#define I2C1_STAT	0x00180010
+
+/* I2C Bus 2 */
+#define I2C2_ADDR	0x00190000
+#define I2C2_WDATA	0x00190004
+#define I2C2_CTRL	0x00190008
+#define I2C2_RDATA	0x0019000C
+#define I2C2_STAT	0x00190010
+
+/* I2C Bus 3 */
+#define I2C3_ADDR	0x001A0000
+#define I2C3_WDATA	0x001A0004
+#define I2C3_CTRL	0x001A0008
+#define I2C3_RDATA	0x001A000C
+#define I2C3_STAT	0x001A0010
+
+/* UART */
+#define UART_CTL	0x001B0000
+#define UART_BRD	0x001B0004
+#define UART_ISR	0x001B000C
+#define UART_CNT	0x001B0010
+
+#endif /* _CX23885_REG_H_ */
diff --git a/drivers/media/pci/cx23885/cx23885-vbi.c b/drivers/media/pci/cx23885/cx23885-vbi.c
new file mode 100644
index 0000000000..4bdd2bea37
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-vbi.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+static unsigned int vbibufs = 4;
+module_param(vbibufs, int, 0644);
+MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32");
+
+static unsigned int vbi_debug;
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (vbi_debug >= level)\
+		printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \
+			__func__, ##arg); \
+	} while (0)
+
+/* ------------------------------------------------------------------ */
+
+#define VBI_LINE_LENGTH 1440
+#define VBI_NTSC_LINE_COUNT 12
+#define VBI_PAL_LINE_COUNT 18
+
+
+int cx23885_vbi_fmt(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	f->fmt.vbi.sampling_rate = 27000000;
+	f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
+	f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	f->fmt.vbi.offset = 0;
+	f->fmt.vbi.flags = 0;
+	if (dev->tvnorm & V4L2_STD_525_60) {
+		/* ntsc */
+		f->fmt.vbi.start[0] = V4L2_VBI_ITU_525_F1_START + 9;
+		f->fmt.vbi.start[1] = V4L2_VBI_ITU_525_F2_START + 9;
+		f->fmt.vbi.count[0] = VBI_NTSC_LINE_COUNT;
+		f->fmt.vbi.count[1] = VBI_NTSC_LINE_COUNT;
+	} else if (dev->tvnorm & V4L2_STD_625_50) {
+		/* pal */
+		f->fmt.vbi.start[0] = V4L2_VBI_ITU_625_F1_START + 5;
+		f->fmt.vbi.start[1] = V4L2_VBI_ITU_625_F2_START + 5;
+		f->fmt.vbi.count[0] = VBI_PAL_LINE_COUNT;
+		f->fmt.vbi.count[1] = VBI_PAL_LINE_COUNT;
+	}
+
+	return 0;
+}
+
+/* We're given the Video Interrupt status register.
+ * The cx23885_video_irq() func has already validated
+ * the potential error bits, we just need to
+ * deal with vbi payload and return indication if
+ * we actually processed any payload.
+ */
+int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status)
+{
+	u32 count;
+	int handled = 0;
+
+	if (status & VID_BC_MSK_VBI_RISCI1) {
+		dprintk(1, "%s() VID_BC_MSK_VBI_RISCI1\n", __func__);
+		spin_lock(&dev->slock);
+		count = cx_read(VBI_A_GPCNT);
+		cx23885_video_wakeup(dev, &dev->vbiq, count);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+
+	return handled;
+}
+
+static int cx23885_start_vbi_dma(struct cx23885_dev    *dev,
+			 struct cx23885_dmaqueue *q,
+			 struct cx23885_buffer   *buf)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02],
+				VBI_LINE_LENGTH, buf->risc.dma);
+
+	/* reset counter */
+	cx_write(VID_A_VBI_CTRL, 3);
+	cx_write(VBI_A_GPCNT_CTL, 3);
+	q->count = 0;
+
+	/* enable irq */
+	cx23885_irq_add_enable(dev, 0x01);
+	cx_set(VID_A_INT_MSK, 0x000022);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5));
+	cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	unsigned lines = VBI_PAL_LINE_COUNT;
+
+	if (dev->tvnorm & V4L2_STD_525_60)
+		lines = VBI_NTSC_LINE_COUNT;
+	*num_planes = 1;
+	sizes[0] = lines * VBI_LINE_LENGTH * 2;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
+	unsigned lines = VBI_PAL_LINE_COUNT;
+
+	if (dev->tvnorm & V4L2_STD_525_60)
+		lines = VBI_NTSC_LINE_COUNT;
+
+	if (vb2_plane_size(vb, 0) < lines * VBI_LINE_LENGTH * 2)
+		return -EINVAL;
+	vb2_set_plane_payload(vb, 0, lines * VBI_LINE_LENGTH * 2);
+
+	cx23885_risc_vbibuffer(dev->pci, &buf->risc,
+			 sgt->sgl,
+			 0, VBI_LINE_LENGTH * lines,
+			 VBI_LINE_LENGTH, 0,
+			 lines);
+	return 0;
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(vb->vb2_queue->drv_priv, buf);
+}
+
+/*
+ * The risc program for each buffer works as follows: it starts with a simple
+ * 'JUMP to addr + 12', which is effectively a NOP. Then the code to DMA the
+ * buffer follows and at the end we have a JUMP back to the start + 12 (skipping
+ * the initial JUMP).
+ *
+ * This is the risc program of the first buffer to be queued if the active list
+ * is empty and it just keeps DMAing this buffer without generating any
+ * interrupts.
+ *
+ * If a new buffer is added then the initial JUMP in the code for that buffer
+ * will generate an interrupt which signals that the previous buffer has been
+ * DMAed successfully and that it can be returned to userspace.
+ *
+ * It also sets the final jump of the previous buffer to the start of the new
+ * buffer, thus chaining the new buffer into the DMA chain. This is a single
+ * atomic u32 write, so there is no race condition.
+ *
+ * The end-result of all this that you only get an interrupt when a buffer
+ * is ready, so the control flow is very easy.
+ */
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf = container_of(vbuf,
+			struct cx23885_buffer, vb);
+	struct cx23885_buffer *prev;
+	struct cx23885_dmaqueue *q = &dev->vbiq;
+	unsigned long flags;
+
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	if (list_empty(&q->active)) {
+		spin_lock_irqsave(&dev->slock, flags);
+		list_add_tail(&buf->queue, &q->active);
+		spin_unlock_irqrestore(&dev->slock, flags);
+		dprintk(2, "[%p/%d] vbi_queue - first active\n",
+			buf, buf->vb.vb2_buf.index);
+
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		prev = list_entry(q->active.prev, struct cx23885_buffer,
+			queue);
+		spin_lock_irqsave(&dev->slock, flags);
+		list_add_tail(&buf->queue, &q->active);
+		spin_unlock_irqrestore(&dev->slock, flags);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+			buf, buf->vb.vb2_buf.index);
+	}
+}
+
+static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &dev->vbiq;
+	struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+	cx23885_start_vbi_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void cx23885_stop_streaming(struct vb2_queue *q)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &dev->vbiq;
+	unsigned long flags;
+
+	cx_clear(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+
+const struct vb2_ops cx23885_vbi_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = cx23885_start_streaming,
+	.stop_streaming = cx23885_stop_streaming,
+};
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
new file mode 100644
index 0000000000..9af2c55961
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -0,0 +1,1417 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "cx23885.h"
+#include "cx23885-video.h"
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/div64.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include "cx23885-ioctl.h"
+#include "xc2028.h"
+
+#include <media/drv-intf/cx25840.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
+MODULE_LICENSE("GPL");
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+static unsigned int vbi_nr[]   = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(video_nr, int, NULL, 0444);
+module_param_array(vbi_nr,   int, NULL, 0444);
+
+MODULE_PARM_DESC(video_nr, "video device numbers");
+MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
+
+static unsigned int video_debug;
+module_param(video_debug, int, 0644);
+MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
+
+static unsigned int irq_debug;
+module_param(irq_debug, int, 0644);
+MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]");
+
+static unsigned int vid_limit = 16;
+module_param(vid_limit, int, 0644);
+MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (video_debug >= level)\
+		printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \
+			__func__, ##arg); \
+	} while (0)
+
+/* ------------------------------------------------------------------- */
+/* static data                                                         */
+
+#define FORMAT_FLAGS_PACKED       0x01
+static struct cx23885_fmt formats[] = {
+	{
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}
+};
+
+static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++)
+		if (formats[i].fourcc == fourcc)
+			return formats+i;
+	return NULL;
+}
+
+/* ------------------------------------------------------------------- */
+
+void cx23885_video_wakeup(struct cx23885_dev *dev,
+	struct cx23885_dmaqueue *q, u32 count)
+{
+	struct cx23885_buffer *buf;
+
+	if (list_empty(&q->active))
+		return;
+	buf = list_entry(q->active.next,
+			struct cx23885_buffer, queue);
+
+	buf->vb.sequence = q->count++;
+	buf->vb.vb2_buf.timestamp = ktime_get_ns();
+	dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf,
+			buf->vb.vb2_buf.index, count, q->count);
+	list_del(&buf->queue);
+	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+}
+
+int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm)
+{
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		.format.code = MEDIA_BUS_FMT_FIXED,
+	};
+
+	dprintk(1, "%s(norm = 0x%08x) name: [%s]\n",
+		__func__,
+		(unsigned int)norm,
+		v4l2_norm_to_name(norm));
+
+	if (dev->tvnorm == norm)
+		return 0;
+
+	if (dev->tvnorm != norm) {
+		if (vb2_is_busy(&dev->vb2_vidq) || vb2_is_busy(&dev->vb2_vbiq) ||
+		    vb2_is_busy(&dev->vb2_mpegq))
+			return -EBUSY;
+	}
+
+	dev->tvnorm = norm;
+	dev->width = 720;
+	dev->height = norm_maxh(norm);
+	dev->field = V4L2_FIELD_INTERLACED;
+
+	call_all(dev, video, s_std, norm);
+
+	format.format.width = dev->width;
+	format.format.height = dev->height;
+	format.format.field = dev->field;
+	call_all(dev, pad, set_fmt, NULL, &format);
+
+	return 0;
+}
+
+static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
+				    struct pci_dev *pci,
+				    struct video_device *template,
+				    char *type)
+{
+	struct video_device *vfd;
+	dprintk(1, "%s()\n", __func__);
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+	*vfd = *template;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->release = video_device_release;
+	vfd->lock = &dev->lock;
+	snprintf(vfd->name, sizeof(vfd->name), "%s (%s)",
+		 cx23885_boards[dev->board].name, type);
+	video_set_drvdata(vfd, dev);
+	return vfd;
+}
+
+int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data)
+{
+	/* 8 bit registers, 8 bit values */
+	u8 buf[] = { reg, data };
+
+	struct i2c_msg msg = { .addr = 0x98 >> 1,
+		.flags = 0, .buf = buf, .len = 2 };
+
+	return i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg, 1);
+}
+
+u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg)
+{
+	/* 8 bit registers, 8 bit values */
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+
+	struct i2c_msg msg[] = {
+		{ .addr = 0x98 >> 1, .flags = 0, .buf = b0, .len = 1 },
+		{ .addr = 0x98 >> 1, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+	};
+
+	ret = i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg[0], 2);
+	if (ret != 2)
+		pr_err("%s() error\n", __func__);
+
+	return b1[0];
+}
+
+static void cx23885_flatiron_dump(struct cx23885_dev *dev)
+{
+	int i;
+	dprintk(1, "Flatiron dump\n");
+	for (i = 0; i < 0x24; i++) {
+		dprintk(1, "FI[%02x] = %02x\n", i,
+			cx23885_flatiron_read(dev, i));
+	}
+}
+
+static int cx23885_flatiron_mux(struct cx23885_dev *dev, int input)
+{
+	u8 val;
+	dprintk(1, "%s(input = %d)\n", __func__, input);
+
+	if (input == 1)
+		val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) & ~FLD_CH_SEL;
+	else if (input == 2)
+		val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) | FLD_CH_SEL;
+	else
+		return -EINVAL;
+
+	val |= 0x20; /* Enable clock to delta-sigma and dec filter */
+
+	cx23885_flatiron_write(dev, CH_PWR_CTRL1, val);
+
+	/* Wake up */
+	cx23885_flatiron_write(dev, CH_PWR_CTRL2, 0);
+
+	if (video_debug)
+		cx23885_flatiron_dump(dev);
+
+	return 0;
+}
+
+static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
+{
+	dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n",
+		__func__,
+		input, INPUT(input)->vmux,
+		INPUT(input)->gpio0, INPUT(input)->gpio1,
+		INPUT(input)->gpio2, INPUT(input)->gpio3);
+	dev->input = input;
+
+	if (dev->board == CX23885_BOARD_MYGICA_X8506 ||
+		dev->board == CX23885_BOARD_MAGICPRO_PROHDTVE2 ||
+		dev->board == CX23885_BOARD_MYGICA_X8507) {
+		/* Select Analog TV */
+		if (INPUT(input)->type == CX23885_VMUX_TELEVISION)
+			cx23885_gpio_clear(dev, GPIO_0);
+	}
+
+	/* Tell the internal A/V decoder */
+	v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
+			INPUT(input)->vmux, 0, 0);
+
+	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
+		(dev->board == CX23885_BOARD_MPX885) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR5525) ||
+		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
+		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
+		(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
+		(dev->board == CX23885_BOARD_VIEWCAST_460E) ||
+		(dev->board == CX23885_BOARD_AVERMEDIA_CE310B)) {
+		/* Configure audio routing */
+		v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
+			INPUT(input)->amux, 0, 0);
+
+		if (INPUT(input)->amux == CX25840_AUDIO7)
+			cx23885_flatiron_mux(dev, 1);
+		else if (INPUT(input)->amux == CX25840_AUDIO6)
+			cx23885_flatiron_mux(dev, 2);
+	}
+
+	return 0;
+}
+
+static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input)
+{
+	dprintk(1, "%s(input=%d)\n", __func__, input);
+
+	/* The baseband video core of the cx23885 has two audio inputs.
+	 * LR1 and LR2. In almost every single case so far only HVR1xxx
+	 * cards we've only ever supported LR1. Time to support LR2,
+	 * which is available via the optional white breakout header on
+	 * the board.
+	 * We'll use a could of existing enums in the card struct to allow
+	 * devs to specify which baseband input they need, or just default
+	 * to what we've always used.
+	 */
+	if (INPUT(input)->amux == CX25840_AUDIO7)
+		cx23885_flatiron_mux(dev, 1);
+	else if (INPUT(input)->amux == CX25840_AUDIO6)
+		cx23885_flatiron_mux(dev, 2);
+	else {
+		/* Not specifically defined, assume the default. */
+		cx23885_flatiron_mux(dev, 1);
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+static int cx23885_start_video_dma(struct cx23885_dev *dev,
+			   struct cx23885_dmaqueue *q,
+			   struct cx23885_buffer *buf)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* Stop the dma/fifo before we tamper with it's risc programs */
+	cx_clear(VID_A_DMA_CTL, 0x11);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
+				buf->bpl, buf->risc.dma);
+
+	/* reset counter */
+	cx_write(VID_A_GPCNT_CTL, 3);
+	q->count = 0;
+
+	/* enable irq */
+	cx23885_irq_add_enable(dev, 0x01);
+	cx_set(VID_A_INT_MSK, 0x000011);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5));
+	cx_set(VID_A_DMA_CTL, 0x11); /* FIFO and RISC enable */
+
+	return 0;
+}
+
+static int queue_setup(struct vb2_queue *q,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx23885_dev *dev = q->drv_priv;
+
+	*num_planes = 1;
+	sizes[0] = (dev->fmt->depth * dev->width * dev->height) >> 3;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	int ret;
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf =
+		container_of(vbuf, struct cx23885_buffer, vb);
+	u32 line0_offset, line1_offset;
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
+	int field_tff;
+
+	buf->bpl = (dev->width * dev->fmt->depth) >> 3;
+
+	if (vb2_plane_size(vb, 0) < dev->height * buf->bpl)
+		return -EINVAL;
+	vb2_set_plane_payload(vb, 0, dev->height * buf->bpl);
+
+	switch (dev->field) {
+	case V4L2_FIELD_TOP:
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
+				sgt->sgl, 0, UNSET,
+				buf->bpl, 0, dev->height);
+		break;
+	case V4L2_FIELD_BOTTOM:
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
+				sgt->sgl, UNSET, 0,
+				buf->bpl, 0, dev->height);
+		break;
+	case V4L2_FIELD_INTERLACED:
+		if (dev->tvnorm & V4L2_STD_525_60)
+			/* NTSC or  */
+			field_tff = 1;
+		else
+			field_tff = 0;
+
+		if (cx23885_boards[dev->board].force_bff)
+			/* PAL / SECAM OR 888 in NTSC MODE */
+			field_tff = 0;
+
+		if (field_tff) {
+			/* cx25840 transmits NTSC bottom field first */
+			dprintk(1, "%s() Creating TFF/NTSC risc\n",
+					__func__);
+			line0_offset = buf->bpl;
+			line1_offset = 0;
+		} else {
+			/* All other formats are top field first */
+			dprintk(1, "%s() Creating BFF/PAL/SECAM risc\n",
+					__func__);
+			line0_offset = 0;
+			line1_offset = buf->bpl;
+		}
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
+				sgt->sgl, line0_offset,
+				line1_offset,
+				buf->bpl, buf->bpl,
+				dev->height >> 1);
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
+				sgt->sgl,
+				0, buf->bpl * (dev->height >> 1),
+				buf->bpl, 0,
+				dev->height >> 1);
+		break;
+	case V4L2_FIELD_SEQ_BT:
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
+				sgt->sgl,
+				buf->bpl * (dev->height >> 1), 0,
+				buf->bpl, 0,
+				dev->height >> 1);
+		break;
+	default:
+		return -EINVAL; /* should not happen */
+	}
+	dprintk(2, "[%p/%d] buffer_init - %dx%d %dbpp 0x%08x - dma=0x%08lx\n",
+		buf, buf->vb.vb2_buf.index,
+		dev->width, dev->height, dev->fmt->depth, dev->fmt->fourcc,
+		(unsigned long)buf->risc.dma);
+	return ret;
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(vb->vb2_queue->drv_priv, buf);
+}
+
+/*
+ * The risc program for each buffer works as follows: it starts with a simple
+ * 'JUMP to addr + 12', which is effectively a NOP. Then the code to DMA the
+ * buffer follows and at the end we have a JUMP back to the start + 12 (skipping
+ * the initial JUMP).
+ *
+ * This is the risc program of the first buffer to be queued if the active list
+ * is empty and it just keeps DMAing this buffer without generating any
+ * interrupts.
+ *
+ * If a new buffer is added then the initial JUMP in the code for that buffer
+ * will generate an interrupt which signals that the previous buffer has been
+ * DMAed successfully and that it can be returned to userspace.
+ *
+ * It also sets the final jump of the previous buffer to the start of the new
+ * buffer, thus chaining the new buffer into the DMA chain. This is a single
+ * atomic u32 write, so there is no race condition.
+ *
+ * The end-result of all this that you only get an interrupt when a buffer
+ * is ready, so the control flow is very easy.
+ */
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer   *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+	struct cx23885_buffer   *prev;
+	struct cx23885_dmaqueue *q    = &dev->vidq;
+	unsigned long flags;
+
+	/* add jump to start */
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 12);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	spin_lock_irqsave(&dev->slock, flags);
+	if (list_empty(&q->active)) {
+		list_add_tail(&buf->queue, &q->active);
+		dprintk(2, "[%p/%d] buffer_queue - first active\n",
+			buf, buf->vb.vb2_buf.index);
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		prev = list_entry(q->active.prev, struct cx23885_buffer,
+			queue);
+		list_add_tail(&buf->queue, &q->active);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+				buf, buf->vb.vb2_buf.index);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &dev->vidq;
+	struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+	cx23885_start_video_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void cx23885_stop_streaming(struct vb2_queue *q)
+{
+	struct cx23885_dev *dev = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &dev->vidq;
+	unsigned long flags;
+
+	cx_clear(VID_A_DMA_CTL, 0x11);
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static const struct vb2_ops cx23885_video_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = cx23885_start_streaming,
+	.stop_streaming = cx23885_stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+/* VIDEO IOCTLS                                                       */
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	f->fmt.pix.width        = dev->width;
+	f->fmt.pix.height       = dev->height;
+	f->fmt.pix.field        = dev->field;
+	f->fmt.pix.pixelformat  = dev->fmt->fourcc;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * dev->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.colorspace   = V4L2_COLORSPACE_SMPTE170M;
+
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	struct cx23885_fmt *fmt;
+	enum v4l2_field   field;
+	unsigned int      maxw, maxh;
+
+	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	field = f->fmt.pix.field;
+	maxw  = 720;
+	maxh  = norm_maxh(dev->tvnorm);
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (f->fmt.pix.height > maxh/2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+	}
+
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_SEQ_TB:
+	case V4L2_FIELD_SEQ_BT:
+		break;
+	default:
+		field = V4L2_FIELD_INTERLACED;
+		break;
+	}
+
+	f->fmt.pix.field = field;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	int err;
+
+	dprintk(2, "%s()\n", __func__);
+	err = vidioc_try_fmt_vid_cap(file, priv, f);
+
+	if (0 != err)
+		return err;
+
+	if (vb2_is_busy(&dev->vb2_vidq) || vb2_is_busy(&dev->vb2_vbiq) ||
+	    vb2_is_busy(&dev->vb2_mpegq))
+		return -EBUSY;
+
+	dev->fmt        = format_by_fourcc(f->fmt.pix.pixelformat);
+	dev->width      = f->fmt.pix.width;
+	dev->height     = f->fmt.pix.height;
+	dev->field	= f->fmt.pix.field;
+	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__,
+		dev->width, dev->height, dev->field);
+	v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED);
+	call_all(dev, pad, set_fmt, NULL, &format);
+	v4l2_fill_pix_format(&f->fmt.pix, &format.format);
+	/* set_fmt overwrites f->fmt.pix.field, restore it */
+	f->fmt.pix.field = dev->field;
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *cap)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	strscpy(cap->driver, "cx23885", sizeof(cap->driver));
+	strscpy(cap->card, cx23885_boards[dev->board].name,
+		sizeof(cap->card));
+	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
+	cap->capabilities = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+			    V4L2_CAP_AUDIO | V4L2_CAP_VBI_CAPTURE |
+			    V4L2_CAP_VIDEO_CAPTURE |
+			    V4L2_CAP_DEVICE_CAPS;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	}
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *f)
+{
+	if (unlikely(f->index >= ARRAY_SIZE(formats)))
+		return -EINVAL;
+
+	f->pixelformat = formats[f->index].fourcc;
+
+	return 0;
+}
+
+static int vidioc_g_pixelaspect(struct file *file, void *priv,
+				int type, struct v4l2_fract *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	bool is_50hz = dev->tvnorm & V4L2_STD_625_50;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	f->numerator = is_50hz ? 54 : 11;
+	f->denominator = is_50hz ? 59 : 10;
+
+	return 0;
+}
+
+static int vidioc_g_selection(struct file *file, void *fh,
+			      struct v4l2_selection *sel)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+		sel->r.top = 0;
+		sel->r.left = 0;
+		sel->r.width = 720;
+		sel->r.height = norm_maxh(dev->tvnorm);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	dprintk(1, "%s()\n", __func__);
+
+	*id = dev->tvnorm;
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id tvnorms)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	dprintk(1, "%s()\n", __func__);
+
+	return cx23885_set_tvnorm(dev, tvnorms);
+}
+
+int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
+{
+	static const char *iname[] = {
+		[CX23885_VMUX_COMPOSITE1] = "Composite1",
+		[CX23885_VMUX_COMPOSITE2] = "Composite2",
+		[CX23885_VMUX_COMPOSITE3] = "Composite3",
+		[CX23885_VMUX_COMPOSITE4] = "Composite4",
+		[CX23885_VMUX_SVIDEO]     = "S-Video",
+		[CX23885_VMUX_COMPONENT]  = "Component",
+		[CX23885_VMUX_TELEVISION] = "Television",
+		[CX23885_VMUX_CABLE]      = "Cable TV",
+		[CX23885_VMUX_DVB]        = "DVB",
+		[CX23885_VMUX_DEBUG]      = "for debug only",
+	};
+	unsigned int n;
+	dprintk(1, "%s()\n", __func__);
+
+	n = i->index;
+	if (n >= MAX_CX23885_INPUT)
+		return -EINVAL;
+
+	if (0 == INPUT(n)->type)
+		return -EINVAL;
+
+	i->index = n;
+	i->type  = V4L2_INPUT_TYPE_CAMERA;
+	strscpy(i->name, iname[INPUT(n)->type], sizeof(i->name));
+	i->std = CX23885_NORMS;
+	if ((CX23885_VMUX_TELEVISION == INPUT(n)->type) ||
+		(CX23885_VMUX_CABLE == INPUT(n)->type)) {
+		i->type = V4L2_INPUT_TYPE_TUNER;
+		i->audioset = 4;
+	} else {
+		/* Two selectable audio inputs for non-tv inputs */
+		i->audioset = 3;
+	}
+
+	if (dev->input == n) {
+		/* enum'd input matches our configured input.
+		 * Ask the video decoder to process the call
+		 * and give it an oppertunity to update the
+		 * status field.
+		 */
+		call_all(dev, video, g_input_status, &i->status);
+	}
+
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	dprintk(1, "%s()\n", __func__);
+	return cx23885_enum_input(dev, i);
+}
+
+int cx23885_get_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	*i = dev->input;
+	dprintk(1, "%s() returns %d\n", __func__, *i);
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	return cx23885_get_input(file, priv, i);
+}
+
+int cx23885_set_input(struct file *file, void *priv, unsigned int i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s(%d)\n", __func__, i);
+
+	if (i >= MAX_CX23885_INPUT) {
+		dprintk(1, "%s() -EINVAL\n", __func__);
+		return -EINVAL;
+	}
+
+	if (INPUT(i)->type == 0)
+		return -EINVAL;
+
+	cx23885_video_mux(dev, i);
+
+	/* By default establish the default audio input for the card also */
+	/* Caller is free to use VIDIOC_S_AUDIO to override afterwards */
+	cx23885_audio_mux(dev, i);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return cx23885_set_input(file, priv, i);
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	call_all(dev, core, log_status);
+	return 0;
+}
+
+static int cx23885_query_audinput(struct file *file, void *priv,
+	struct v4l2_audio *i)
+{
+	static const char *iname[] = {
+		[0] = "Baseband L/R 1",
+		[1] = "Baseband L/R 2",
+		[2] = "TV",
+	};
+	unsigned int n;
+	dprintk(1, "%s()\n", __func__);
+
+	n = i->index;
+	if (n >= 3)
+		return -EINVAL;
+
+	memset(i, 0, sizeof(*i));
+	i->index = n;
+	strscpy(i->name, iname[n], sizeof(i->name));
+	i->capability = V4L2_AUDCAP_STEREO;
+	return 0;
+
+}
+
+static int vidioc_enum_audinput(struct file *file, void *priv,
+				struct v4l2_audio *i)
+{
+	return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_g_audinput(struct file *file, void *priv,
+	struct v4l2_audio *i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if ((CX23885_VMUX_TELEVISION == INPUT(dev->input)->type) ||
+		(CX23885_VMUX_CABLE == INPUT(dev->input)->type))
+		i->index = 2;
+	else
+		i->index = dev->audinput;
+	dprintk(1, "%s(input=%d)\n", __func__, i->index);
+
+	return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_s_audinput(struct file *file, void *priv,
+	const struct v4l2_audio *i)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	if ((CX23885_VMUX_TELEVISION == INPUT(dev->input)->type) ||
+		(CX23885_VMUX_CABLE == INPUT(dev->input)->type)) {
+		return i->index != 2 ? -EINVAL : 0;
+	}
+	if (i->index > 1)
+		return -EINVAL;
+
+	dprintk(1, "%s(%d)\n", __func__, i->index);
+
+	dev->audinput = i->index;
+
+	/* Skip the audio defaults from the cards struct, caller wants
+	 * directly touch the audio mux hardware. */
+	cx23885_flatiron_mux(dev, dev->audinput + 1);
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
+	if (0 != t->index)
+		return -EINVAL;
+
+	strscpy(t->name, "Television", sizeof(t->name));
+
+	call_all(dev, tuner, g_tuner, t);
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
+	if (0 != t->index)
+		return -EINVAL;
+	/* Update the A/V core */
+	call_all(dev, tuner, s_tuner, t);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
+	f->type = V4L2_TUNER_ANALOG_TV;
+	f->frequency = dev->freq;
+
+	call_all(dev, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int cx23885_set_freq(struct cx23885_dev *dev, const struct v4l2_frequency *f)
+{
+	struct v4l2_ctrl *mute;
+	int old_mute_val = 1;
+
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
+	if (unlikely(f->tuner != 0))
+		return -EINVAL;
+
+	dev->freq = f->frequency;
+
+	/* I need to mute audio here */
+	mute = v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_AUDIO_MUTE);
+	if (mute) {
+		old_mute_val = v4l2_ctrl_g_ctrl(mute);
+		if (!old_mute_val)
+			v4l2_ctrl_s_ctrl(mute, 1);
+	}
+
+	call_all(dev, tuner, s_frequency, f);
+
+	/* When changing channels it is required to reset TVAUDIO */
+	msleep(100);
+
+	/* I need to unmute audio here */
+	if (old_mute_val == 0)
+		v4l2_ctrl_s_ctrl(mute, old_mute_val);
+
+	return 0;
+}
+
+static int cx23885_set_freq_via_ops(struct cx23885_dev *dev,
+	const struct v4l2_frequency *f)
+{
+	struct v4l2_ctrl *mute;
+	int old_mute_val = 1;
+	struct vb2_dvb_frontend *vfe;
+	struct dvb_frontend *fe;
+
+	struct analog_parameters params = {
+		.mode      = V4L2_TUNER_ANALOG_TV,
+		.audmode   = V4L2_TUNER_MODE_STEREO,
+		.std       = dev->tvnorm,
+		.frequency = f->frequency
+	};
+
+	dev->freq = f->frequency;
+
+	/* I need to mute audio here */
+	mute = v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_AUDIO_MUTE);
+	if (mute) {
+		old_mute_val = v4l2_ctrl_g_ctrl(mute);
+		if (!old_mute_val)
+			v4l2_ctrl_s_ctrl(mute, 1);
+	}
+
+	/* If HVR1850 */
+	dprintk(1, "%s() frequency=%d tuner=%d std=0x%llx\n", __func__,
+		params.frequency, f->tuner, params.std);
+
+	vfe = vb2_dvb_get_frontend(&dev->ts2.frontends, 1);
+	if (!vfe) {
+		return -EINVAL;
+	}
+
+	fe = vfe->dvb.frontend;
+
+	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR5525) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC))
+		fe = &dev->ts1.analog_fe;
+
+	if (fe && fe->ops.tuner_ops.set_analog_params) {
+		call_all(dev, video, s_std, dev->tvnorm);
+		fe->ops.tuner_ops.set_analog_params(fe, &params);
+	}
+	else
+		pr_err("%s() No analog tuner, aborting\n", __func__);
+
+	/* When changing channels it is required to reset TVAUDIO */
+	msleep(100);
+
+	/* I need to unmute audio here */
+	if (old_mute_val == 0)
+		v4l2_ctrl_s_ctrl(mute, old_mute_val);
+
+	return 0;
+}
+
+int cx23885_set_frequency(struct file *file, void *priv,
+	const struct v4l2_frequency *f)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	int ret;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		ret = cx23885_set_freq_via_ops(dev, f);
+		break;
+	default:
+		ret = cx23885_set_freq(dev, f);
+	}
+
+	return ret;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+	const struct v4l2_frequency *f)
+{
+	return cx23885_set_frequency(file, priv, f);
+}
+
+/* ----------------------------------------------------------- */
+
+int cx23885_video_irq(struct cx23885_dev *dev, u32 status)
+{
+	u32 mask, count;
+	int handled = 0;
+
+	mask   = cx_read(VID_A_INT_MSK);
+	if (0 == (status & mask))
+		return handled;
+
+	cx_write(VID_A_INT_STAT, status);
+
+	/* risc op code error, fifo overflow or line sync detection error */
+	if ((status & VID_BC_MSK_OPC_ERR) ||
+		(status & VID_BC_MSK_SYNC) ||
+		(status & VID_BC_MSK_OF)) {
+
+		if (status & VID_BC_MSK_OPC_ERR) {
+			dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
+				VID_BC_MSK_OPC_ERR);
+			pr_warn("%s: video risc op code error\n",
+				dev->name);
+			cx23885_sram_channel_dump(dev,
+				&dev->sram_channels[SRAM_CH01]);
+		}
+
+		if (status & VID_BC_MSK_SYNC)
+			dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) video lines miss-match\n",
+				VID_BC_MSK_SYNC);
+
+		if (status & VID_BC_MSK_OF)
+			dprintk(7, " (VID_BC_MSK_OF 0x%08x) fifo overflow\n",
+				VID_BC_MSK_OF);
+
+	}
+
+	/* Video */
+	if (status & VID_BC_MSK_RISCI1) {
+		spin_lock(&dev->slock);
+		count = cx_read(VID_A_GPCNT);
+		cx23885_video_wakeup(dev, &dev->vidq, count);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+
+	/* Allow the VBI framework to process it's payload */
+	handled += cx23885_vbi_irq(dev, status);
+
+	return handled;
+}
+
+/* ----------------------------------------------------------- */
+/* exported stuff                                              */
+
+static const struct v4l2_file_operations video_fops = {
+	.owner	       = THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = vb2_fop_release,
+	.read           = vb2_fop_read,
+	.poll		= vb2_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap           = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap     = cx23885_vbi_fmt,
+	.vidioc_try_fmt_vbi_cap   = cx23885_vbi_fmt,
+	.vidioc_s_fmt_vbi_cap     = cx23885_vbi_fmt,
+	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
+	.vidioc_prepare_buf   = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf      = vb2_ioctl_querybuf,
+	.vidioc_qbuf          = vb2_ioctl_qbuf,
+	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
+	.vidioc_streamon      = vb2_ioctl_streamon,
+	.vidioc_streamoff     = vb2_ioctl_streamoff,
+	.vidioc_g_pixelaspect = vidioc_g_pixelaspect,
+	.vidioc_g_selection   = vidioc_g_selection,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_g_std         = vidioc_g_std,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_log_status    = vidioc_log_status,
+	.vidioc_g_tuner       = vidioc_g_tuner,
+	.vidioc_s_tuner       = vidioc_s_tuner,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_chip_info   = cx23885_g_chip_info,
+	.vidioc_g_register    = cx23885_g_register,
+	.vidioc_s_register    = cx23885_s_register,
+#endif
+	.vidioc_enumaudio     = vidioc_enum_audinput,
+	.vidioc_g_audio       = vidioc_g_audinput,
+	.vidioc_s_audio       = vidioc_s_audinput,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static struct video_device cx23885_vbi_template;
+static struct video_device cx23885_video_template = {
+	.name                 = "cx23885-video",
+	.fops                 = &video_fops,
+	.ioctl_ops	      = &video_ioctl_ops,
+	.tvnorms              = CX23885_NORMS,
+};
+
+void cx23885_video_unregister(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+	cx23885_irq_remove(dev, 0x01);
+
+	if (dev->vbi_dev) {
+		if (video_is_registered(dev->vbi_dev))
+			video_unregister_device(dev->vbi_dev);
+		else
+			video_device_release(dev->vbi_dev);
+		dev->vbi_dev = NULL;
+	}
+	if (dev->video_dev) {
+		if (video_is_registered(dev->video_dev))
+			video_unregister_device(dev->video_dev);
+		else
+			video_device_release(dev->video_dev);
+		dev->video_dev = NULL;
+	}
+
+	if (dev->audio_dev)
+		cx23885_audio_unregister(dev);
+}
+
+int cx23885_video_register(struct cx23885_dev *dev)
+{
+	struct vb2_queue *q;
+	int err;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Initialize VBI template */
+	cx23885_vbi_template = cx23885_video_template;
+	strscpy(cx23885_vbi_template.name, "cx23885-vbi",
+		sizeof(cx23885_vbi_template.name));
+
+	dev->tvnorm = V4L2_STD_NTSC_M;
+	dev->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV);
+	dev->field = V4L2_FIELD_INTERLACED;
+	dev->width = 720;
+	dev->height = norm_maxh(dev->tvnorm);
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+
+	/* init vbi dma queues */
+	INIT_LIST_HEAD(&dev->vbiq.active);
+
+	cx23885_irq_add_enable(dev, 0x01);
+
+	if ((TUNER_ABSENT != dev->tuner_type) &&
+			((dev->tuner_bus == 0) || (dev->tuner_bus == 1))) {
+		struct v4l2_subdev *sd = NULL;
+
+		if (dev->tuner_addr)
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[dev->tuner_bus].i2c_adap,
+				"tuner", dev->tuner_addr, NULL);
+		else
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[dev->tuner_bus].i2c_adap,
+				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
+		if (sd) {
+			struct tuner_setup tun_setup;
+
+			memset(&tun_setup, 0, sizeof(tun_setup));
+			tun_setup.mode_mask = T_ANALOG_TV;
+			tun_setup.type = dev->tuner_type;
+			tun_setup.addr = v4l2_i2c_subdev_addr(sd);
+			tun_setup.tuner_callback = cx23885_tuner_callback;
+
+			v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup);
+
+			if ((dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) ||
+			    (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200)) {
+				struct xc2028_ctrl ctrl = {
+					.fname = XC2028_DEFAULT_FIRMWARE,
+					.max_len = 64
+				};
+				struct v4l2_priv_tun_config cfg = {
+					.tuner = dev->tuner_type,
+					.priv = &ctrl
+				};
+				v4l2_subdev_call(sd, tuner, s_config, &cfg);
+			}
+
+			if (dev->board == CX23885_BOARD_AVERMEDIA_HC81R) {
+				struct xc2028_ctrl ctrl = {
+					.fname = "xc3028L-v36.fw",
+					.max_len = 64
+				};
+				struct v4l2_priv_tun_config cfg = {
+					.tuner = dev->tuner_type,
+					.priv = &ctrl
+				};
+				v4l2_subdev_call(sd, tuner, s_config, &cfg);
+			}
+		}
+	}
+
+	/* initial device configuration */
+	mutex_lock(&dev->lock);
+	cx23885_set_tvnorm(dev, dev->tvnorm);
+	cx23885_video_mux(dev, 0);
+	cx23885_audio_mux(dev, 0);
+	mutex_unlock(&dev->lock);
+
+	q = &dev->vb2_vidq;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx23885_buffer);
+	q->ops = &cx23885_video_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &dev->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		goto fail_unreg;
+
+	q = &dev->vb2_vbiq;
+	q->type = V4L2_BUF_TYPE_VBI_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx23885_buffer);
+	q->ops = &cx23885_vbi_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &dev->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		goto fail_unreg;
+
+	/* register Video device */
+	dev->video_dev = cx23885_vdev_init(dev, dev->pci,
+		&cx23885_video_template, "video");
+	dev->video_dev->queue = &dev->vb2_vidq;
+	dev->video_dev->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+				      V4L2_CAP_AUDIO | V4L2_CAP_VIDEO_CAPTURE;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		dev->video_dev->device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->video_dev->device_caps |= V4L2_CAP_TUNER;
+	}
+
+	err = video_register_device(dev->video_dev, VFL_TYPE_VIDEO,
+				    video_nr[dev->nr]);
+	if (err < 0) {
+		pr_info("%s: can't register video device\n",
+			dev->name);
+		goto fail_unreg;
+	}
+	pr_info("%s: registered device %s [v4l2]\n",
+	       dev->name, video_device_node_name(dev->video_dev));
+
+	/* register VBI device */
+	dev->vbi_dev = cx23885_vdev_init(dev, dev->pci,
+		&cx23885_vbi_template, "vbi");
+	dev->vbi_dev->queue = &dev->vb2_vbiq;
+	dev->vbi_dev->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+				    V4L2_CAP_AUDIO | V4L2_CAP_VBI_CAPTURE;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		dev->vbi_dev->device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->vbi_dev->device_caps |= V4L2_CAP_TUNER;
+	}
+	err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+				    vbi_nr[dev->nr]);
+	if (err < 0) {
+		pr_info("%s: can't register vbi device\n",
+			dev->name);
+		goto fail_unreg;
+	}
+	pr_info("%s: registered device %s\n",
+	       dev->name, video_device_node_name(dev->vbi_dev));
+
+	/* Register ALSA audio device */
+	dev->audio_dev = cx23885_audio_register(dev);
+
+	return 0;
+
+fail_unreg:
+	cx23885_video_unregister(dev);
+	return err;
+}
diff --git a/drivers/media/pci/cx23885/cx23885-video.h b/drivers/media/pci/cx23885/cx23885-video.h
new file mode 100644
index 0000000000..c6c8a8605d
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-video.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23885_VIDEO_H_
+#define _CX23885_VIDEO_H_
+int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data);
+u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
new file mode 100644
index 0000000000..349462ee2c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -0,0 +1,634 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/kdev_t.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/videobuf2-dma-sg.h>
+#include <media/videobuf2-dvb.h>
+#include <media/rc-core.h>
+
+#include "cx23885-reg.h"
+#include "media/drv-intf/cx2341x.h"
+
+#include <linux/mutex.h>
+
+#define CX23885_VERSION "0.0.4"
+
+#define UNSET (-1U)
+
+#define CX23885_MAXBOARDS 8
+
+/* Max number of inputs by card */
+#define MAX_CX23885_INPUT 8
+#define INPUT(nr) (&cx23885_boards[dev->board].input[nr])
+
+#define BUFFER_TIMEOUT     (HZ)  /* 0.5 seconds */
+
+#define CX23885_BOARD_NOAUTO               UNSET
+#define CX23885_BOARD_UNKNOWN                  0
+#define CX23885_BOARD_HAUPPAUGE_HVR1800lp      1
+#define CX23885_BOARD_HAUPPAUGE_HVR1800        2
+#define CX23885_BOARD_HAUPPAUGE_HVR1250        3
+#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP   4
+#define CX23885_BOARD_HAUPPAUGE_HVR1500Q       5
+#define CX23885_BOARD_HAUPPAUGE_HVR1500        6
+#define CX23885_BOARD_HAUPPAUGE_HVR1200        7
+#define CX23885_BOARD_HAUPPAUGE_HVR1700        8
+#define CX23885_BOARD_HAUPPAUGE_HVR1400        9
+#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
+#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F   13
+#define CX23885_BOARD_TBS_6920                 14
+#define CX23885_BOARD_TEVII_S470               15
+#define CX23885_BOARD_DVBWORLD_2005            16
+#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI      17
+#define CX23885_BOARD_HAUPPAUGE_HVR1270        18
+#define CX23885_BOARD_HAUPPAUGE_HVR1275        19
+#define CX23885_BOARD_HAUPPAUGE_HVR1255        20
+#define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
+#define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850        24
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E800    25
+#define CX23885_BOARD_HAUPPAUGE_HVR1290        26
+#define CX23885_BOARD_MYGICA_X8558PRO          27
+#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
+#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
+#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
+#define CX23885_BOARD_MPX885                   32
+#define CX23885_BOARD_MYGICA_X8507             33
+#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
+#define CX23885_BOARD_TEVII_S471               35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111  36
+#define CX23885_BOARD_PROF_8000                37
+#define CX23885_BOARD_HAUPPAUGE_HVR4400        38
+#define CX23885_BOARD_AVERMEDIA_HC81R          39
+#define CX23885_BOARD_TBS_6981                 40
+#define CX23885_BOARD_TBS_6980                 41
+#define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
+#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE     43
+#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
+#define CX23885_BOARD_DVBSKY_T9580             45
+#define CX23885_BOARD_DVBSKY_T980C             46
+#define CX23885_BOARD_DVBSKY_S950C             47
+#define CX23885_BOARD_TT_CT2_4500_CI           48
+#define CX23885_BOARD_DVBSKY_S950              49
+#define CX23885_BOARD_DVBSKY_S952              50
+#define CX23885_BOARD_DVBSKY_T982              51
+#define CX23885_BOARD_HAUPPAUGE_HVR5525        52
+#define CX23885_BOARD_HAUPPAUGE_STARBURST      53
+#define CX23885_BOARD_VIEWCAST_260E            54
+#define CX23885_BOARD_VIEWCAST_460E            55
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
+#define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
+#define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
+#define CX23885_BOARD_AVERMEDIA_CE310B         62
+
+#define GPIO_0 0x00000001
+#define GPIO_1 0x00000002
+#define GPIO_2 0x00000004
+#define GPIO_3 0x00000008
+#define GPIO_4 0x00000010
+#define GPIO_5 0x00000020
+#define GPIO_6 0x00000040
+#define GPIO_7 0x00000080
+#define GPIO_8 0x00000100
+#define GPIO_9 0x00000200
+#define GPIO_10 0x00000400
+#define GPIO_11 0x00000800
+#define GPIO_12 0x00001000
+#define GPIO_13 0x00002000
+#define GPIO_14 0x00004000
+#define GPIO_15 0x00008000
+
+/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
+#define CX23885_NORMS (\
+	V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443 | \
+	V4L2_STD_PAL_BG |  V4L2_STD_PAL_DK    |  V4L2_STD_PAL_I    | \
+	V4L2_STD_PAL_M  |  V4L2_STD_PAL_N     |  V4L2_STD_PAL_Nc   | \
+	V4L2_STD_PAL_60 |  V4L2_STD_SECAM_L   |  V4L2_STD_SECAM_DK)
+
+struct cx23885_fmt {
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+	int   flags;
+	u32   cxformat;
+};
+
+struct cx23885_tvnorm {
+	char		*name;
+	v4l2_std_id	id;
+	u32		cxiformat;
+	u32		cxoformat;
+};
+
+enum cx23885_itype {
+	CX23885_VMUX_COMPOSITE1 = 1,
+	CX23885_VMUX_COMPOSITE2,
+	CX23885_VMUX_COMPOSITE3,
+	CX23885_VMUX_COMPOSITE4,
+	CX23885_VMUX_SVIDEO,
+	CX23885_VMUX_COMPONENT,
+	CX23885_VMUX_TELEVISION,
+	CX23885_VMUX_CABLE,
+	CX23885_VMUX_DVB,
+	CX23885_VMUX_DEBUG,
+	CX23885_RADIO,
+};
+
+enum cx23885_src_sel_type {
+	CX23885_SRC_SEL_EXT_656_VIDEO = 0,
+	CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO
+};
+
+struct cx23885_riscmem {
+	unsigned int   size;
+	__le32         *cpu;
+	__le32         *jmp;
+	dma_addr_t     dma;
+};
+
+/* buffer for one video frame */
+struct cx23885_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct vb2_v4l2_buffer vb;
+	struct list_head queue;
+
+	/* cx23885 specific */
+	unsigned int           bpl;
+	struct cx23885_riscmem risc;
+	struct cx23885_fmt     *fmt;
+	u32                    count;
+};
+
+struct cx23885_input {
+	enum cx23885_itype type;
+	unsigned int    vmux;
+	unsigned int    amux;
+	u32             gpio0, gpio1, gpio2, gpio3;
+};
+
+typedef enum {
+	CX23885_MPEG_UNDEFINED = 0,
+	CX23885_MPEG_DVB,
+	CX23885_ANALOG_VIDEO,
+	CX23885_MPEG_ENCODER,
+} port_t;
+
+struct cx23885_board {
+	char                    *name;
+	port_t			porta, portb, portc;
+	int		num_fds_portb, num_fds_portc;
+	unsigned int		tuner_type;
+	unsigned int		radio_type;
+	unsigned char		tuner_addr;
+	unsigned char		radio_addr;
+	unsigned int		tuner_bus;
+
+	/* Vendors can and do run the PCIe bridge at different
+	 * clock rates, driven physically by crystals on the PCBs.
+	 * The core has to accommodate this. This allows the user
+	 * to add new boards with new frequencys. The value is
+	 * expressed in Hz.
+	 *
+	 * The core framework will default this value based on
+	 * current designs, but it can vary.
+	 */
+	u32			clk_freq;
+	struct cx23885_input    input[MAX_CX23885_INPUT];
+	int			ci_type; /* for NetUP */
+	/* Force bottom field first during DMA (888 workaround) */
+	u32                     force_bff;
+};
+
+struct cx23885_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+struct cx23885_i2c {
+	struct cx23885_dev *dev;
+
+	int                        nr;
+
+	/* i2c i/o */
+	struct i2c_adapter         i2c_adap;
+	struct i2c_client          i2c_client;
+	u32                        i2c_rc;
+
+	/* 885 registers used for raw address */
+	u32                        i2c_period;
+	u32                        reg_ctrl;
+	u32                        reg_stat;
+	u32                        reg_addr;
+	u32                        reg_rdata;
+	u32                        reg_wdata;
+};
+
+struct cx23885_dmaqueue {
+	struct list_head       active;
+	u32                    count;
+};
+
+struct cx23885_tsport {
+	struct cx23885_dev *dev;
+
+	unsigned                   nr;
+	int                        sram_chno;
+
+	struct vb2_dvb_frontends   frontends;
+
+	/* dma queues */
+	struct cx23885_dmaqueue    mpegq;
+	u32                        ts_packet_size;
+	u32                        ts_packet_count;
+
+	int                        width;
+	int                        height;
+
+	spinlock_t                 slock;
+
+	/* registers */
+	u32                        reg_gpcnt;
+	u32                        reg_gpcnt_ctl;
+	u32                        reg_dma_ctl;
+	u32                        reg_lngth;
+	u32                        reg_hw_sop_ctrl;
+	u32                        reg_gen_ctrl;
+	u32                        reg_bd_pkt_status;
+	u32                        reg_sop_status;
+	u32                        reg_fifo_ovfl_stat;
+	u32                        reg_vld_misc;
+	u32                        reg_ts_clk_en;
+	u32                        reg_ts_int_msk;
+	u32                        reg_ts_int_stat;
+	u32                        reg_src_sel;
+
+	/* Default register vals */
+	int                        pci_irqmask;
+	u32                        dma_ctl_val;
+	u32                        ts_int_msk_val;
+	u32                        gen_ctrl_val;
+	u32                        ts_clk_en_val;
+	u32                        src_sel_val;
+	u32                        vld_misc_val;
+	u32                        hw_sop_ctrl_val;
+
+	/* Allow a single tsport to have multiple frontends */
+	u32                        num_frontends;
+	void                (*gate_ctrl)(struct cx23885_tsport *port, int open);
+	void                       *port_priv;
+
+	/* Workaround for a temp dvb_frontend that the tuner can attached to */
+	struct dvb_frontend analog_fe;
+
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
+	struct i2c_client *i2c_client_sec;
+	struct i2c_client *i2c_client_ci;
+
+	int (*set_frontend)(struct dvb_frontend *fe);
+	int (*fe_set_voltage)(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage);
+};
+
+struct cx23885_kernel_ir {
+	struct cx23885_dev	*cx;
+	char			*name;
+	char			*phys;
+
+	struct rc_dev		*rc;
+};
+
+struct cx23885_audio_buffer {
+	unsigned int		bpl;
+	struct cx23885_riscmem	risc;
+	void			*vaddr;
+	struct scatterlist	*sglist;
+	int			sglen;
+	unsigned long		nr_pages;
+};
+
+struct cx23885_audio_dev {
+	struct cx23885_dev	*dev;
+
+	struct pci_dev		*pci;
+
+	struct snd_card		*card;
+
+	spinlock_t		lock;
+
+	atomic_t		count;
+
+	unsigned int		dma_size;
+	unsigned int		period_size;
+	unsigned int		num_periods;
+
+	struct cx23885_audio_buffer   *buf;
+
+	struct snd_pcm_substream *substream;
+};
+
+struct cx23885_dev {
+	atomic_t                   refcount;
+	struct v4l2_device	   v4l2_dev;
+	struct v4l2_ctrl_handler   ctrl_handler;
+
+	/* pci stuff */
+	struct pci_dev             *pci;
+	unsigned char              pci_rev, pci_lat;
+	int                        pci_bus, pci_slot;
+	u32                        __iomem *lmmio;
+	u8                         __iomem *bmmio;
+	int                        pci_irqmask;
+	spinlock_t		   pci_irqmask_lock; /* protects mask reg too */
+	int                        hwrevision;
+
+	/* This valud is board specific and is used to configure the
+	 * AV core so we see nice clean and stable video and audio. */
+	u32                        clk_freq;
+
+	/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
+	struct cx23885_i2c         i2c_bus[3];
+
+	int                        nr;
+	struct mutex               lock;
+	struct mutex               gpio_lock;
+
+	/* board details */
+	unsigned int               board;
+	char                       name[32];
+
+	struct cx23885_tsport      ts1, ts2;
+
+	/* sram configuration */
+	struct sram_channel        *sram_channels;
+
+	enum {
+		CX23885_BRIDGE_UNDEFINED = 0,
+		CX23885_BRIDGE_885 = 885,
+		CX23885_BRIDGE_887 = 887,
+		CX23885_BRIDGE_888 = 888,
+	} bridge;
+
+	/* Analog video */
+	unsigned int               input;
+	unsigned int               audinput; /* Selectable audio input */
+	u32                        tvaudio;
+	v4l2_std_id                tvnorm;
+	unsigned int               tuner_type;
+	unsigned char              tuner_addr;
+	unsigned int               tuner_bus;
+	unsigned int               radio_type;
+	unsigned char              radio_addr;
+	struct v4l2_subdev	   *sd_cx25840;
+	struct work_struct	   cx25840_work;
+
+	/* Infrared */
+	struct v4l2_subdev         *sd_ir;
+	struct work_struct	   ir_rx_work;
+	unsigned long		   ir_rx_notifications;
+	struct work_struct	   ir_tx_work;
+	unsigned long		   ir_tx_notifications;
+
+	struct cx23885_kernel_ir   *kernel_ir;
+	atomic_t		   ir_input_stopping;
+
+	/* V4l */
+	u32                        freq;
+	struct video_device        *video_dev;
+	struct video_device        *vbi_dev;
+
+	/* video capture */
+	struct cx23885_fmt         *fmt;
+	unsigned int               width, height;
+	unsigned		   field;
+
+	struct cx23885_dmaqueue    vidq;
+	struct vb2_queue           vb2_vidq;
+	struct cx23885_dmaqueue    vbiq;
+	struct vb2_queue           vb2_vbiq;
+
+	spinlock_t                 slock;
+
+	/* MPEG Encoder ONLY settings */
+	u32                        cx23417_mailbox;
+	struct cx2341x_handler     cxhdl;
+	struct video_device        *v4l_device;
+	struct vb2_queue           vb2_mpegq;
+	struct cx23885_tvnorm      encodernorm;
+
+	/* Analog raw audio */
+	struct cx23885_audio_dev   *audio_dev;
+
+	/* Does the system require periodic DMA resets? */
+	unsigned int		need_dma_reset:1;
+};
+
+static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct cx23885_dev, v4l2_dev);
+}
+
+#define call_all(dev, o, f, args...) \
+	v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
+
+#define CX23885_HW_888_IR  (1 << 0)
+#define CX23885_HW_AV_CORE (1 << 1)
+
+#define call_hw(dev, grpid, o, f, args...) \
+	v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
+
+extern struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw);
+
+#define SRAM_CH01  0 /* Video A */
+#define SRAM_CH02  1 /* VBI A */
+#define SRAM_CH03  2 /* Video B */
+#define SRAM_CH04  3 /* Transport via B */
+#define SRAM_CH05  4 /* VBI B */
+#define SRAM_CH06  5 /* Video C */
+#define SRAM_CH07  6 /* Transport via C */
+#define SRAM_CH08  7 /* Audio Internal A */
+#define SRAM_CH09  8 /* Audio Internal B */
+#define SRAM_CH10  9 /* Audio External */
+#define SRAM_CH11 10 /* COMB_3D_N */
+#define SRAM_CH12 11 /* Comb 3D N1 */
+#define SRAM_CH13 12 /* Comb 3D N2 */
+#define SRAM_CH14 13 /* MOE Vid */
+#define SRAM_CH15 14 /* MOE RSLT */
+
+struct sram_channel {
+	char *name;
+	u32  cmds_start;
+	u32  ctrl_start;
+	u32  cdt;
+	u32  fifo_start;
+	u32  fifo_size;
+	u32  ptr1_reg;
+	u32  ptr2_reg;
+	u32  cnt1_reg;
+	u32  cnt2_reg;
+	u32  jumponly;
+};
+
+/* ----------------------------------------------------------- */
+
+#define cx_read(reg)             readl(dev->lmmio + ((reg)>>2))
+#define cx_write(reg, value)     writel((value), dev->lmmio + ((reg)>>2))
+
+#define cx_andor(reg, mask, value) \
+  writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
+  ((value) & (mask)), dev->lmmio+((reg)>>2))
+
+#define cx_set(reg, bit)          cx_andor((reg), (bit), (bit))
+#define cx_clear(reg, bit)        cx_andor((reg), (bit), 0)
+
+/* ----------------------------------------------------------- */
+/* cx23885-core.c                                              */
+
+extern int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+	struct sram_channel *ch,
+	unsigned int bpl, u32 risc);
+
+extern void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+	struct sram_channel *ch);
+
+extern int cx23885_risc_buffer(struct pci_dev *pci, struct cx23885_riscmem *risc,
+	struct scatterlist *sglist,
+	unsigned int top_offset, unsigned int bottom_offset,
+	unsigned int bpl, unsigned int padding, unsigned int lines);
+
+extern int cx23885_risc_vbibuffer(struct pci_dev *pci,
+	struct cx23885_riscmem *risc, struct scatterlist *sglist,
+	unsigned int top_offset, unsigned int bottom_offset,
+	unsigned int bpl, unsigned int padding, unsigned int lines);
+
+int cx23885_start_dma(struct cx23885_tsport *port,
+			     struct cx23885_dmaqueue *q,
+			     struct cx23885_buffer   *buf);
+void cx23885_cancel_buffers(struct cx23885_tsport *port);
+
+
+extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
+	int asoutput);
+
+extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask);
+
+/* ----------------------------------------------------------- */
+/* cx23885-cards.c                                             */
+extern struct cx23885_board cx23885_boards[];
+extern const unsigned int cx23885_bcount;
+
+extern struct cx23885_subid cx23885_subids[];
+extern const unsigned int cx23885_idcount;
+
+extern int cx23885_tuner_callback(void *priv, int component,
+	int command, int arg);
+extern void cx23885_card_list(struct cx23885_dev *dev);
+extern int  cx23885_ir_init(struct cx23885_dev *dev);
+extern void cx23885_ir_pci_int_enable(struct cx23885_dev *dev);
+extern void cx23885_ir_fini(struct cx23885_dev *dev);
+extern void cx23885_gpio_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev);
+
+extern int cx23885_dvb_register(struct cx23885_tsport *port);
+extern int cx23885_dvb_unregister(struct cx23885_tsport *port);
+
+extern int cx23885_buf_prepare(struct cx23885_buffer *buf,
+			       struct cx23885_tsport *port);
+extern void cx23885_buf_queue(struct cx23885_tsport *port,
+			      struct cx23885_buffer *buf);
+extern void cx23885_free_buffer(struct cx23885_dev *dev,
+				struct cx23885_buffer *buf);
+
+/* ----------------------------------------------------------- */
+/* cx23885-video.c                                             */
+/* Video */
+extern int cx23885_video_register(struct cx23885_dev *dev);
+extern void cx23885_video_unregister(struct cx23885_dev *dev);
+extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status);
+extern void cx23885_video_wakeup(struct cx23885_dev *dev,
+	struct cx23885_dmaqueue *q, u32 count);
+int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i);
+int cx23885_set_input(struct file *file, void *priv, unsigned int i);
+int cx23885_get_input(struct file *file, void *priv, unsigned int *i);
+int cx23885_set_frequency(struct file *file, void *priv, const struct v4l2_frequency *f);
+int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm);
+
+/* ----------------------------------------------------------- */
+/* cx23885-vbi.c                                               */
+extern int cx23885_vbi_fmt(struct file *file, void *priv,
+	struct v4l2_format *f);
+extern void cx23885_vbi_timeout(unsigned long data);
+extern const struct vb2_ops cx23885_vbi_qops;
+extern int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status);
+
+/* cx23885-i2c.c                                                */
+extern int cx23885_i2c_register(struct cx23885_i2c *bus);
+extern int cx23885_i2c_unregister(struct cx23885_i2c *bus);
+extern void cx23885_av_clk(struct cx23885_dev *dev, int enable);
+
+/* ----------------------------------------------------------- */
+/* cx23885-417.c                                               */
+extern int cx23885_417_register(struct cx23885_dev *dev);
+extern void cx23885_417_unregister(struct cx23885_dev *dev);
+extern int cx23885_irq_417(struct cx23885_dev *dev, u32 status);
+extern void cx23885_417_check_encoder(struct cx23885_dev *dev);
+extern void cx23885_mc417_init(struct cx23885_dev *dev);
+extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
+extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern int mc417_register_read(struct cx23885_dev *dev,
+				u16 address, u32 *value);
+extern int mc417_register_write(struct cx23885_dev *dev,
+				u16 address, u32 value);
+extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
+
+/* ----------------------------------------------------------- */
+/* cx23885-alsa.c                                             */
+extern struct cx23885_audio_dev *cx23885_audio_register(
+					struct cx23885_dev *dev);
+extern void cx23885_audio_unregister(struct cx23885_dev *dev);
+extern int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask);
+extern int cx23885_risc_databuffer(struct pci_dev *pci,
+				   struct cx23885_riscmem *risc,
+				   struct scatterlist *sglist,
+				   unsigned int bpl,
+				   unsigned int lines,
+				   unsigned int lpi);
+
+/* ----------------------------------------------------------- */
+/* tv norms                                                    */
+
+static inline unsigned int norm_maxh(v4l2_std_id norm)
+{
+	return (norm & V4L2_STD_525_60) ? 480 : 576;
+}
diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c
new file mode 100644
index 0000000000..222d044214
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23888-ir.c
@@ -0,0 +1,1205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  CX23888 Integrated Consumer Infrared Controller
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#include "cx23885.h"
+#include "cx23888-ir.h"
+
+#include <linux/kfifo.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-device.h>
+#include <media/rc-core.h>
+
+static unsigned int ir_888_debug;
+module_param(ir_888_debug, int, 0644);
+MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
+
+#define CX23888_IR_REG_BASE	0x170000
+/*
+ * These CX23888 register offsets have a straightforward one to one mapping
+ * to the CX23885 register offsets of 0x200 through 0x218
+ */
+#define CX23888_IR_CNTRL_REG	0x170000
+#define CNTRL_WIN_3_3	0x00000000
+#define CNTRL_WIN_4_3	0x00000001
+#define CNTRL_WIN_3_4	0x00000002
+#define CNTRL_WIN_4_4	0x00000003
+#define CNTRL_WIN	0x00000003
+#define CNTRL_EDG_NONE	0x00000000
+#define CNTRL_EDG_FALL	0x00000004
+#define CNTRL_EDG_RISE	0x00000008
+#define CNTRL_EDG_BOTH	0x0000000C
+#define CNTRL_EDG	0x0000000C
+#define CNTRL_DMD	0x00000010
+#define CNTRL_MOD	0x00000020
+#define CNTRL_RFE	0x00000040
+#define CNTRL_TFE	0x00000080
+#define CNTRL_RXE	0x00000100
+#define CNTRL_TXE	0x00000200
+#define CNTRL_RIC	0x00000400
+#define CNTRL_TIC	0x00000800
+#define CNTRL_CPL	0x00001000
+#define CNTRL_LBM	0x00002000
+#define CNTRL_R		0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO	0x00008000
+
+#define CX23888_IR_TXCLK_REG	0x170004
+#define TXCLK_TCD	0x0000FFFF
+
+#define CX23888_IR_RXCLK_REG	0x170008
+#define RXCLK_RCD	0x0000FFFF
+
+#define CX23888_IR_CDUTY_REG	0x17000C
+#define CDUTY_CDC	0x0000000F
+
+#define CX23888_IR_STATS_REG	0x170010
+#define STATS_RTO	0x00000001
+#define STATS_ROR	0x00000002
+#define STATS_RBY	0x00000004
+#define STATS_TBY	0x00000008
+#define STATS_RSR	0x00000010
+#define STATS_TSR	0x00000020
+
+#define CX23888_IR_IRQEN_REG	0x170014
+#define IRQEN_RTE	0x00000001
+#define IRQEN_ROE	0x00000002
+#define IRQEN_RSE	0x00000010
+#define IRQEN_TSE	0x00000020
+
+#define CX23888_IR_FILTR_REG	0x170018
+#define FILTR_LPF	0x0000FFFF
+
+/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */
+#define CX23888_IR_FIFO_REG	0x170040
+#define FIFO_RXTX	0x0000FFFF
+#define FIFO_RXTX_LVL	0x00010000
+#define FIFO_RXTX_RTO	0x0001FFFF
+#define FIFO_RX_NDV	0x00020000
+#define FIFO_RX_DEPTH	8
+#define FIFO_TX_DEPTH	8
+
+/* CX23888 unique registers */
+#define CX23888_IR_SEEDP_REG	0x17001C
+#define CX23888_IR_TIMOL_REG	0x170020
+#define CX23888_IR_WAKE0_REG	0x170024
+#define CX23888_IR_WAKE1_REG	0x170028
+#define CX23888_IR_WAKE2_REG	0x17002C
+#define CX23888_IR_MASK0_REG	0x170030
+#define CX23888_IR_MASK1_REG	0x170034
+#define CX23888_IR_MAKS2_REG	0x170038
+#define CX23888_IR_DPIPG_REG	0x17003C
+#define CX23888_IR_LEARN_REG	0x170044
+
+#define CX23888_VIDCLK_FREQ	108000000 /* 108 MHz, BT.656 */
+#define CX23888_IR_REFCLK_FREQ	(CX23888_VIDCLK_FREQ / 2)
+
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx23888_ir_fifo_rec {
+	u32 hw_fifo_data;
+	struct ir_raw_event ir_core_data;
+};
+
+#define CX23888_IR_RX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
+#define CX23888_IR_TX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
+
+struct cx23888_ir_state {
+	struct v4l2_subdev sd;
+	struct cx23885_dev *dev;
+
+	struct v4l2_subdev_ir_parameters rx_params;
+	struct mutex rx_params_lock;
+	atomic_t rxclk_divider;
+	atomic_t rx_invert;
+
+	struct kfifo rx_kfifo;
+	spinlock_t rx_kfifo_lock;
+
+	struct v4l2_subdev_ir_parameters tx_params;
+	struct mutex tx_params_lock;
+	atomic_t txclk_divider;
+};
+
+static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd)
+{
+	return v4l2_get_subdevdata(sd);
+}
+
+/*
+ * IR register block read and write functions
+ */
+static
+inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value)
+{
+	cx_write(addr, value);
+	return 0;
+}
+
+static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr)
+{
+	return cx_read(addr);
+}
+
+static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr,
+				     u32 and_mask, u32 or_value)
+{
+	cx_andor(addr, ~and_mask, or_value);
+	return 0;
+}
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ *	(0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+	if (d > RXCLK_RCD + 1)
+		d = RXCLK_RCD;
+	else if (d < 2)
+		d = 1;
+	else
+		d--;
+	return (u16) d;
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+	return count_to_clock_divider(
+			  DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+	return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+						 unsigned int rollovers)
+{
+	return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ,
+				 (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ *	0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+	if (d > FILTR_LPF)
+		d = FILTR_LPF;
+	else if (d < 4)
+		d = 0;
+	return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+	return count_to_lpf_count(
+		DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in ns */
+	return DIV_ROUND_CLOSEST(count * 1000,
+				 CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in us */
+	return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count computations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+	/*
+	 * Resolution is the duration of 1 tick of the readable portion of
+	 * the pulse width counter as read from the FIFO.  The two lsb's are
+	 * not readable, hence the << 2.  This function returns ns.
+	 */
+	return DIV_ROUND_CLOSEST((1 << 2)  * ((u32) divider + 1) * 1000,
+				 CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+	rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000);     /* / MHz => ns */
+	if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return n;
+}
+
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1);    /* cycles      */
+	rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+	if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+	u64 clocks;
+	u32 rem;
+	clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles  */
+	rem = do_div(clocks, 1000);                         /* /1000 = cycles */
+	if (rem >= 1000 / 2)
+		clocks++;
+	return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+	do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+	/* net result needs to be rounded down and decremented by 1 */
+	if (count > RXCLK_RCD + 1)
+		count = RXCLK_RCD;
+	else if (count < 2)
+		count = 1;
+	else
+		count--;
+	return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+	TX_FIFO_HALF_EMPTY = 0,
+	TX_FIFO_EMPTY      = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+	RX_FIFO_HALF_FULL = 0,
+	RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct cx23885_dev *dev,
+					    enum tx_fifo_watermark level)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct cx23885_dev *dev,
+					    enum rx_fifo_watermark level)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct cx23885_dev *dev, bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+			   enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct cx23885_dev *dev, bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+			   enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct cx23885_dev *dev,
+						bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD,
+			   enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct cx23885_dev *dev,
+						  bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD,
+			   enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct cx23885_dev *dev,
+					       u32 edge_types)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+			   edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct cx23885_dev *dev,
+					unsigned int carrier,
+					unsigned int *carrier_range_low,
+					unsigned int *carrier_range_high)
+{
+	u32 v;
+	unsigned int c16 = carrier * 16;
+
+	if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+		v = CNTRL_WIN_3_4;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+	} else {
+		v = CNTRL_WIN_3_3;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+	}
+
+	if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+		v |= CNTRL_WIN_4_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+	} else {
+		v |= CNTRL_WIN_3_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+	}
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
+					      bool invert)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL,
+			   invert ? CNTRL_CPL : 0);
+}
+
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+					  bool invert)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+			   invert ? CNTRL_IVO : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev,
+					  unsigned int duty_cycle)
+{
+	u32 n;
+	n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+	if (n != 0)
+		n--;
+	if (n > 15)
+		n = 15;
+	cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n);
+	return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns)
+{
+	u32 count = ns_to_lpf_count(min_width_ns);
+	cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count);
+	return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask)
+{
+	mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+	cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG,
+			   ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask)
+{
+	mask &= IRQEN_TSE;
+	cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
+				  bool *handled)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	unsigned long flags;
+
+	u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+	u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+	u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+
+	union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+	unsigned int i, j, k;
+	u32 events, v;
+	int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+
+	tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+	rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+	rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+	ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+	tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+	rse = irqen & IRQEN_RSE; /* Rx FIFO Service Request IRQ Enable */
+	rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+	roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+	*handled = false;
+	v4l2_dbg(2, ir_888_debug, sd, "IRQ Status:  %s %s %s %s %s %s\n",
+		 tsr ? "tsr" : "   ", rsr ? "rsr" : "   ",
+		 rto ? "rto" : "   ", ror ? "ror" : "   ",
+		 stats & STATS_TBY ? "tby" : "   ",
+		 stats & STATS_RBY ? "rby" : "   ");
+
+	v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n",
+		 tse ? "tse" : "   ", rse ? "rse" : "   ",
+		 rte ? "rte" : "   ", roe ? "roe" : "   ");
+
+	/*
+	 * Transmitter interrupt service
+	 */
+	if (tse && tsr) {
+		/*
+		 * TODO:
+		 * Check the watermark threshold setting
+		 * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+		 * Push the data to the hardware FIFO.
+		 * If there was nothing more to send in the tx_kfifo, disable
+		 *	the TSR IRQ and notify the v4l2_device.
+		 * If there was something in the tx_kfifo, check the tx_kfifo
+		 *      level and notify the v4l2_device, if it is low.
+		 */
+		/* For now, inhibit TSR interrupt until Tx is implemented */
+		irqenable_tx(dev, 0);
+		events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+		*handled = true;
+	}
+
+	/*
+	 * Receiver interrupt service
+	 */
+	kror = 0;
+	if ((rse && rsr) || (rte && rto)) {
+		/*
+		 * Receive data on RSR to clear the STATS_RSR.
+		 * Receive data on RTO, since we may not have yet hit the RSR
+		 * watermark when we receive the RTO.
+		 */
+		for (i = 0, v = FIFO_RX_NDV;
+		     (v & FIFO_RX_NDV) && !kror; i = 0) {
+			for (j = 0;
+			     (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+				v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
+				rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+				i++;
+			}
+			if (i == 0)
+				break;
+			j = i * sizeof(union cx23888_ir_fifo_rec);
+			k = kfifo_in_locked(&state->rx_kfifo,
+				      (unsigned char *) rx_data, j,
+				      &state->rx_kfifo_lock);
+			if (k != j)
+				kror++; /* rx_kfifo over run */
+		}
+		*handled = true;
+	}
+
+	events = 0;
+	v = 0;
+	if (kror) {
+		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver software FIFO overrun\n");
+	}
+	if (roe && ror) {
+		/*
+		 * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+		 * the Rx FIFO Over Run status (STATS_ROR)
+		 */
+		v |= CNTRL_RFE;
+		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+	}
+	if (rte && rto) {
+		/*
+		 * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+		 * the Rx Pulse Width Timer Time Out (STATS_RTO)
+		 */
+		v |= CNTRL_RXE;
+		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+	}
+	if (v) {
+		/* Clear STATS_ROR & STATS_RTO as needed by resetting hardware */
+		cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v);
+		cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
+		*handled = true;
+	}
+
+	spin_lock_irqsave(&state->rx_kfifo_lock, flags);
+	if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
+		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+	spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
+
+	if (events)
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+	return 0;
+}
+
+/* Receiver */
+static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			      ssize_t *num)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	bool invert = (bool) atomic_read(&state->rx_invert);
+	u16 divider = (u16) atomic_read(&state->rxclk_divider);
+
+	unsigned int i, n;
+	union cx23888_ir_fifo_rec *p;
+	unsigned u, v, w;
+
+	n = count / sizeof(union cx23888_ir_fifo_rec)
+		* sizeof(union cx23888_ir_fifo_rec);
+	if (n == 0) {
+		*num = 0;
+		return 0;
+	}
+
+	n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
+
+	n /= sizeof(union cx23888_ir_fifo_rec);
+	*num = n * sizeof(union cx23888_ir_fifo_rec);
+
+	for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
+
+		if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+			/* Assume RTO was because of no IR light input */
+			u = 0;
+			w = 1;
+		} else {
+			u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+			if (invert)
+				u = u ? 0 : 1;
+			w = 0;
+		}
+
+		v = (unsigned) pulse_width_count_to_ns(
+				  (u16)(p->hw_fifo_data & FIFO_RXTX), divider) / 1000;
+		if (v > IR_MAX_DURATION)
+			v = IR_MAX_DURATION;
+
+		p->ir_core_data = (struct ir_raw_event)
+			{ .pulse = u, .duration = v, .timeout = w };
+
+		v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns  %s  %s\n",
+			 v, u ? "mark" : "space", w ? "(timed out)" : "");
+		if (w)
+			v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
+	}
+	return 0;
+}
+
+static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	mutex_lock(&state->rx_params_lock);
+	memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+
+	mutex_lock(&state->rx_params_lock);
+
+	/* Disable or slow down all IR Rx circuits and counters */
+	irqenable_rx(dev, 0);
+	control_rx_enable(dev, false);
+	control_rx_demodulation_enable(dev, false);
+	control_rx_s_edge_detection(dev, CNTRL_EDG_NONE);
+	filter_rx_s_min_width(dev, 0);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD);
+
+	state->rx_params.shutdown = true;
+
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	struct v4l2_subdev_ir_parameters *o = &state->rx_params;
+	u16 rxclk_divider;
+
+	if (p->shutdown)
+		return cx23888_ir_rx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	mutex_lock(&state->rx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
+
+	/* Before we tweak the hardware, we have to disable the receiver */
+	irqenable_rx(dev, 0);
+	control_rx_enable(dev, false);
+
+	control_rx_demodulation_enable(dev, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq,
+						     &rxclk_divider);
+
+		o->carrier_freq = p->carrier_freq;
+
+		o->duty_cycle = p->duty_cycle = 50;
+
+		control_rx_s_carrier_window(dev, p->carrier_freq,
+					    &p->carrier_range_lower,
+					    &p->carrier_range_upper);
+		o->carrier_range_lower = p->carrier_range_lower;
+		o->carrier_range_upper = p->carrier_range_upper;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
+	} else {
+		p->max_pulse_width =
+			    rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
+						       &rxclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&state->rxclk_divider, rxclk_divider);
+
+	p->noise_filter_min_width =
+			  filter_rx_s_min_width(dev, p->noise_filter_min_width);
+	o->noise_filter_min_width = p->noise_filter_min_width;
+
+	p->resolution = clock_divider_to_resolution(rxclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL);
+
+	control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
+
+	o->invert_level = p->invert_level;
+	atomic_set(&state->rx_invert, p->invert_level);
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&state->rx_kfifo_lock, flags);
+		kfifo_reset(&state->rx_kfifo);
+		/* reset tx_fifo too if there is one... */
+		spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
+		if (p->interrupt_enable)
+			irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+		control_rx_enable(dev, p->enable);
+	}
+
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+/* Transmitter */
+static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			       ssize_t *num)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	/* For now enable the Tx FIFO Service interrupt & pretend we did work */
+	irqenable_tx(dev, IRQEN_TSE);
+	*num = count;
+	return 0;
+}
+
+static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	mutex_lock(&state->tx_params_lock);
+	memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+
+	mutex_lock(&state->tx_params_lock);
+
+	/* Disable or slow down all IR Tx circuits and counters */
+	irqenable_tx(dev, 0);
+	control_tx_enable(dev, false);
+	control_tx_modulation_enable(dev, false);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD);
+
+	state->tx_params.shutdown = true;
+
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	struct v4l2_subdev_ir_parameters *o = &state->tx_params;
+	u16 txclk_divider;
+
+	if (p->shutdown)
+		return cx23888_ir_tx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	mutex_lock(&state->tx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
+
+	/* Before we tweak the hardware, we have to disable the transmitter */
+	irqenable_tx(dev, 0);
+	control_tx_enable(dev, false);
+
+	control_tx_modulation_enable(dev, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq,
+						     &txclk_divider);
+		o->carrier_freq = p->carrier_freq;
+
+		p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
+		o->duty_cycle = p->duty_cycle;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
+	} else {
+		p->max_pulse_width =
+			    txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
+						       &txclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&state->txclk_divider, txclk_divider);
+
+	p->resolution = clock_divider_to_resolution(txclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
+
+	control_tx_polarity_invert(dev, p->invert_carrier_sense);
+	o->invert_carrier_sense = p->invert_carrier_sense;
+
+	control_tx_level_invert(dev, p->invert_level);
+	o->invert_level = p->invert_level;
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		if (p->interrupt_enable)
+			irqenable_tx(dev, IRQEN_TSE);
+		control_tx_enable(dev, p->enable);
+	}
+
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops
+ */
+static int cx23888_ir_log_status(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	char *s;
+	int i, j;
+
+	u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+	u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD;
+	u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD;
+	u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC;
+	u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+	u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+	u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF;
+
+	v4l2_info(sd, "IR Receiver:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_RXE ? "yes" : "no");
+	v4l2_info(sd, "\tDemodulation from a carrier:       %s\n",
+		  cntrl & CNTRL_DMD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_RFE ? "enabled" : "disabled");
+	switch (cntrl & CNTRL_EDG) {
+	case CNTRL_EDG_NONE:
+		s = "disabled";
+		break;
+	case CNTRL_EDG_FALL:
+		s = "falling edge";
+		break;
+	case CNTRL_EDG_RISE:
+		s = "rising edge";
+		break;
+	case CNTRL_EDG_BOTH:
+		s = "rising & falling edges";
+		break;
+	default:
+		s = "??? edge";
+		break;
+	}
+	v4l2_info(sd, "\tPulse timers' start/stop trigger:  %s\n", s);
+	v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+		  cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+	v4l2_info(sd, "\tLoopback mode:                     %s\n",
+		  cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+	if (cntrl & CNTRL_DMD) {
+		v4l2_info(sd, "\tExpected carrier (16 clocks):      %u Hz\n",
+			  clock_divider_to_carrier_freq(rxclk));
+		switch (cntrl & CNTRL_WIN) {
+		case CNTRL_WIN_3_3:
+			i = 3;
+			j = 3;
+			break;
+		case CNTRL_WIN_4_3:
+			i = 4;
+			j = 3;
+			break;
+		case CNTRL_WIN_3_4:
+			i = 3;
+			j = 4;
+			break;
+		case CNTRL_WIN_4_4:
+			i = 4;
+			j = 4;
+			break;
+		default:
+			i = 0;
+			j = 0;
+			break;
+		}
+		v4l2_info(sd, "\tNext carrier edge window:	    16 clocks -%1d/+%1d, %u to %u Hz\n",
+			  i, j,
+			  clock_divider_to_freq(rxclk, 16 + j),
+			  clock_divider_to_freq(rxclk, 16 - i));
+	}
+	v4l2_info(sd, "\tMax measurable pulse width:        %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, rxclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+	v4l2_info(sd, "\tLow pass filter:                   %s\n",
+		  filtr ? "enabled" : "disabled");
+	if (filtr)
+		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, %u ns\n",
+			  lpf_count_to_us(filtr),
+			  lpf_count_to_ns(filtr));
+	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",
+		  stats & STATS_RTO ? "yes" : "no");
+	v4l2_info(sd, "\tPulse width timer time-out intr:   %s\n",
+		  irqen & IRQEN_RTE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO overrun:                      %s\n",
+		  stats & STATS_ROR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO overrun interrupt:            %s\n",
+		  irqen & IRQEN_ROE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_RBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_RSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+	v4l2_info(sd, "IR Transmitter:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_TXE ? "yes" : "no");
+	v4l2_info(sd, "\tModulation onto a carrier:         %s\n",
+		  cntrl & CNTRL_MOD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_TFE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+	v4l2_info(sd, "\tOutput pin level inversion         %s\n",
+		  cntrl & CNTRL_IVO ? "yes" : "no");
+	v4l2_info(sd, "\tCarrier polarity:                  %s\n",
+		  cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+				    : "space:noburst mark:burst");
+	if (cntrl & CNTRL_MOD) {
+		v4l2_info(sd, "\tCarrier (16 clocks):               %u Hz\n",
+			  clock_divider_to_carrier_freq(txclk));
+		v4l2_info(sd, "\tCarrier duty cycle:                %2u/16\n",
+			  cduty + 1);
+	}
+	v4l2_info(sd, "\tMax pulse width:                   %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, txclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, txclk));
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_TBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_TSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx23888_ir_g_register(struct v4l2_subdev *sd,
+				 struct v4l2_dbg_register *reg)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+	if ((addr & 0x3) != 0)
+		return -EINVAL;
+	if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+		return -EINVAL;
+	reg->size = 4;
+	reg->val = cx23888_ir_read4(state->dev, addr);
+	return 0;
+}
+
+static int cx23888_ir_s_register(struct v4l2_subdev *sd,
+				 const struct v4l2_dbg_register *reg)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+	if ((addr & 0x3) != 0)
+		return -EINVAL;
+	if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+		return -EINVAL;
+	cx23888_ir_write4(state->dev, addr, reg->val);
+	return 0;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
+	.log_status = cx23888_ir_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = cx23888_ir_g_register,
+	.s_register = cx23888_ir_s_register,
+#endif
+	.interrupt_service_routine = cx23888_ir_irq_handler,
+};
+
+static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
+	.rx_read = cx23888_ir_rx_read,
+	.rx_g_parameters = cx23888_ir_rx_g_parameters,
+	.rx_s_parameters = cx23888_ir_rx_s_parameters,
+
+	.tx_write = cx23888_ir_tx_write,
+	.tx_g_parameters = cx23888_ir_tx_g_parameters,
+	.tx_s_parameters = cx23888_ir_tx_s_parameters,
+};
+
+static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
+	.core = &cx23888_ir_core_ops,
+	.ir = &cx23888_ir_ir_ops,
+};
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */
+
+	/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+	/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+	.noise_filter_min_width = 333333, /* ns */
+	.carrier_range_lower = 35000,
+	.carrier_range_upper = 37000,
+	.invert_level = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+	.duty_cycle = 25,      /* 25 %   - RC-5 carrier */
+	.invert_level = false,
+	.invert_carrier_sense = false,
+};
+
+int cx23888_ir_probe(struct cx23885_dev *dev)
+{
+	struct cx23888_ir_state *state;
+	struct v4l2_subdev *sd;
+	struct v4l2_subdev_ir_parameters default_params;
+	int ret;
+
+	state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&state->rx_kfifo_lock);
+	if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE,
+			GFP_KERNEL)) {
+		kfree(state);
+		return -ENOMEM;
+	}
+
+	state->dev = dev;
+	sd = &state->sd;
+
+	v4l2_subdev_init(sd, &cx23888_ir_controller_ops);
+	v4l2_set_subdevdata(sd, state);
+	/* FIXME - fix the formatting of dev->v4l2_dev.name and use it */
+	snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name);
+	sd->grp_id = CX23885_HW_888_IR;
+
+	ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd);
+	if (ret == 0) {
+		/*
+		 * Ensure no interrupts arrive from '888 specific conditions,
+		 * since we ignore them in this driver to have commonality with
+		 * similar IR controller cores.
+		 */
+		cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0);
+
+		mutex_init(&state->rx_params_lock);
+		default_params = default_rx_params;
+		v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+		mutex_init(&state->tx_params_lock);
+		default_params = default_tx_params;
+		v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+	} else {
+		kfifo_free(&state->rx_kfifo);
+	}
+	return ret;
+}
+
+int cx23888_ir_remove(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev *sd;
+	struct cx23888_ir_state *state;
+
+	sd = cx23885_find_hw(dev, CX23885_HW_888_IR);
+	if (sd == NULL)
+		return -ENODEV;
+
+	cx23888_ir_rx_shutdown(sd);
+	cx23888_ir_tx_shutdown(sd);
+
+	state = to_state(sd);
+	v4l2_device_unregister_subdev(sd);
+	kfifo_free(&state->rx_kfifo);
+	kfree(state);
+	/* Nothing more to free() as state held the actual v4l2_subdev object */
+	return 0;
+}
diff --git a/drivers/media/pci/cx23885/cx23888-ir.h b/drivers/media/pci/cx23885/cx23888-ir.h
new file mode 100644
index 0000000000..da532c50fb
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23888-ir.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  CX23888 Integrated Consumer Infrared Controller
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ */
+
+#ifndef _CX23888_IR_H_
+#define _CX23888_IR_H_
+int cx23888_ir_probe(struct cx23885_dev *dev);
+int cx23888_ir_remove(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/pci/cx23885/netup-eeprom.c b/drivers/media/pci/cx23885/netup-eeprom.c
new file mode 100644
index 0000000000..26dd5b3884
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-eeprom.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * netup-eeprom.c
+ *
+ * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#
+#include "cx23885.h"
+#include "netup-eeprom.h"
+
+#define EEPROM_I2C_ADDR 0x50
+
+int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr)
+{
+	int ret;
+	unsigned char buf[2];
+
+	/* Read from EEPROM */
+	struct i2c_msg msg[] = {
+		{
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= 0,
+			.buf	= &buf[0],
+			.len	= 1
+		}, {
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= I2C_M_RD,
+			.buf	= &buf[1],
+			.len	= 1
+		}
+
+	};
+
+	buf[0] = addr;
+	buf[1] = 0x0;
+
+	ret = i2c_transfer(i2c_adap, msg, 2);
+
+	if (ret != 2) {
+		pr_err("eeprom i2c read error, status=%d\n", ret);
+		return -1;
+	}
+
+	return buf[1];
+};
+
+int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data)
+{
+	int ret;
+	unsigned char bufw[2];
+
+	/* Write into EEPROM */
+	struct i2c_msg msg[] = {
+		{
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= 0,
+			.buf	= &bufw[0],
+			.len	= 2
+		}
+	};
+
+	bufw[0] = addr;
+	bufw[1] = data;
+
+	ret = i2c_transfer(i2c_adap, msg, 1);
+
+	if (ret != 1) {
+		pr_err("eeprom i2c write error, status=%d\n", ret);
+		return -1;
+	}
+
+	mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */
+	return 0;
+};
+
+void netup_get_card_info(struct i2c_adapter *i2c_adap,
+				struct netup_card_info *cinfo)
+{
+	int i, j;
+
+	cinfo->rev =  netup_eeprom_read(i2c_adap, 63);
+
+	for (i = 64, j = 0; i < 70; i++, j++)
+		cinfo->port[0].mac[j] =  netup_eeprom_read(i2c_adap, i);
+
+	for (i = 70, j = 0; i < 76; i++, j++)
+		cinfo->port[1].mac[j] =  netup_eeprom_read(i2c_adap, i);
+};
diff --git a/drivers/media/pci/cx23885/netup-eeprom.h b/drivers/media/pci/cx23885/netup-eeprom.h
new file mode 100644
index 0000000000..549a033679
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-eeprom.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * netup-eeprom.h
+ *
+ * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#ifndef NETUP_EEPROM_H
+#define NETUP_EEPROM_H
+
+struct netup_port_info {
+	u8 mac[6];/* card MAC address */
+};
+
+struct netup_card_info {
+	struct netup_port_info port[2];/* ports - 1,2 */
+	u8 rev;/* card revision */
+};
+
+extern int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr);
+extern int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data);
+extern void netup_get_card_info(struct i2c_adapter *i2c_adap,
+				struct netup_card_info *cinfo);
+
+#endif
diff --git a/drivers/media/pci/cx23885/netup-init.c b/drivers/media/pci/cx23885/netup-init.c
new file mode 100644
index 0000000000..c653b07665
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-init.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * netup-init.c
+ *
+ * NetUP Dual DVB-S2 CI driver
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#include "cx23885.h"
+#include "netup-init.h"
+
+static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val)
+{
+	int ret;
+	u8 buf[3];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 3
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	buf[2] = val;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		pr_err("%s: i2c write error!\n", __func__);
+}
+
+static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val)
+{
+	int ret;
+	u8 buf[6];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 6
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	buf[2] = val & 0xff;
+	buf[3] = (val >> 8) & 0xff;
+	buf[4] = (val >> 16) & 0xff;
+	buf[5] = val >> 24;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		pr_err("%s: i2c write error!\n", __func__);
+}
+
+static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg)
+{
+	int ret;
+	u8 buf[2];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 2
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		pr_err("%s: i2c write error!\n", __func__);
+
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		pr_err("%s: i2c read error!\n", __func__);
+
+	return buf[0];
+}
+
+static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask,
+								u8 or_value)
+{
+	i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value);
+}
+/* set 27MHz on AUX_CLK */
+void netup_initialize(struct cx23885_dev *dev)
+{
+	struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2];
+	struct i2c_adapter *i2c = &i2c_bus->i2c_adap;
+
+	/* Stop microcontroller */
+	i2c_av_and_or(i2c, 0x803, ~0x10, 0x00);
+
+	/* Aux PLL frac for 27 MHz */
+	i2c_av_write4(i2c, 0x114, 0xea0eb3);
+
+	/* Aux PLL int for 27 MHz */
+	i2c_av_write4(i2c, 0x110, 0x090319);
+
+	/* start microcontroller */
+	i2c_av_and_or(i2c, 0x803, ~0x10, 0x10);
+}
diff --git a/drivers/media/pci/cx23885/netup-init.h b/drivers/media/pci/cx23885/netup-init.h
new file mode 100644
index 0000000000..a009f73f8e
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-init.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * netup-init.h
+ *
+ * NetUP Dual DVB-S2 CI driver
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+extern void netup_initialize(struct cx23885_dev *dev);