Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1844 insertions, 0 deletions

diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
new file mode 100644
index 0000000000..2087f2491c
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-dvb.c
@@ -0,0 +1,1844 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * device driver for Conexant 2388x based TV cards
+ * MPEG Transport Stream (DVB) routines
+ *
+ * (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
+ * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ */
+
+#include "cx88.h"
+#include "dvb-pll.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include <media/v4l2-common.h>
+
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "cx88-vp3054-i2c.h"
+#include "zl10353.h"
+#include "cx22702.h"
+#include "or51132.h"
+#include "lgdt330x.h"
+#include "s5h1409.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "nxt200x.h"
+#include "cx24123.h"
+#include "isl6421.h"
+#include "tuner-simple.h"
+#include "tda9887.h"
+#include "s5h1411.h"
+#include "stv0299.h"
+#include "z0194a.h"
+#include "stv0288.h"
+#include "stb6000.h"
+#include "cx24116.h"
+#include "stv0900.h"
+#include "stb6100.h"
+#include "stb6100_proc.h"
+#include "mb86a16.h"
+#include "ts2020.h"
+#include "ds3000.h"
+
+MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
+
+static unsigned int dvb_buf_tscnt = 32;
+module_param(dvb_buf_tscnt, int, 0644);
+MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug >= level)						\
+		printk(KERN_DEBUG pr_fmt("%s: dvb:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx8802_dev *dev = q->drv_priv;
+
+	*num_planes = 1;
+	dev->ts_packet_size  = 188 * 4;
+	dev->ts_packet_count = dvb_buf_tscnt;
+	sizes[0] = dev->ts_packet_size * dev->ts_packet_count;
+	*num_buffers = dvb_buf_tscnt;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	return cx8802_buf_prepare(vb->vb2_queue, dev, buf);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	cx8802_buf_queue(dev, buf);
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	struct cx88_buffer *buf;
+
+	buf = list_entry(dmaq->active.next, struct cx88_buffer, list);
+	cx8802_start_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void stop_streaming(struct vb2_queue *q)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	unsigned long flags;
+
+	cx8802_cancel_buffers(dev);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static const struct vb2_ops dvb_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int cx88_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx8802_driver *drv = NULL;
+	int ret = 0;
+	int fe_id;
+
+	fe_id = vb2_dvb_find_frontend(&dev->frontends, fe);
+	if (!fe_id) {
+		pr_err("%s() No frontend found\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->core->lock);
+	drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
+	if (drv) {
+		if (acquire) {
+			dev->frontends.active_fe_id = fe_id;
+			ret = drv->request_acquire(drv);
+		} else {
+			ret = drv->request_release(drv);
+			dev->frontends.active_fe_id = 0;
+		}
+	}
+	mutex_unlock(&dev->core->lock);
+
+	return ret;
+}
+
+static void cx88_dvb_gate_ctrl(struct cx88_core  *core, int open)
+{
+	struct vb2_dvb_frontends *f;
+	struct vb2_dvb_frontend *fe;
+
+	if (!core->dvbdev)
+		return;
+
+	f = &core->dvbdev->frontends;
+
+	if (!f)
+		return;
+
+	if (f->gate <= 1) /* undefined or fe0 */
+		fe = vb2_dvb_get_frontend(f, 1);
+	else
+		fe = vb2_dvb_get_frontend(f, f->gate);
+
+	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
+		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+}
+
+/* ------------------------------------------------------------------ */
+
+static int dvico_fusionhdtv_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { CLOCK_CTL,  0x38, 0x39 };
+	static const u8 reset[]         = { RESET,      0x80 };
+	static const u8 adc_ctl_1_cfg[] = { ADC_CTL_1,  0x40 };
+	static const u8 agc_cfg[]       = { AGC_TARGET, 0x24, 0x20 };
+	static const u8 gpp_ctl_cfg[]   = { GPP_CTL,    0x33 };
+	static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+	return 0;
+}
+
+static int dvico_dual_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { CLOCK_CTL,  0x38, 0x38 };
+	static const u8 reset[]         = { RESET,      0x80 };
+	static const u8 adc_ctl_1_cfg[] = { ADC_CTL_1,  0x40 };
+	static const u8 agc_cfg[]       = { AGC_TARGET, 0x28, 0x20 };
+	static const u8 gpp_ctl_cfg[]   = { GPP_CTL,    0x33 };
+	static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static int dntv_live_dvbt_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { 0x89, 0x38, 0x39 };
+	static const u8 reset[]         = { 0x50, 0x80 };
+	static const u8 adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static const u8 agc_cfg[]       = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
+	static const u8 dntv_extra[]     = { 0xB5, 0x7A };
+	static const u8 capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(2000);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	udelay(2000);
+	mt352_write(fe, dntv_extra,     sizeof(dntv_extra));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static const struct mt352_config dvico_fusionhdtv = {
+	.demod_address = 0x0f,
+	.demod_init    = dvico_fusionhdtv_demod_init,
+};
+
+static const struct mt352_config dntv_live_dvbt_config = {
+	.demod_address = 0x0f,
+	.demod_init    = dntv_live_dvbt_demod_init,
+};
+
+static const struct mt352_config dvico_fusionhdtv_dual = {
+	.demod_address = 0x0f,
+	.demod_init    = dvico_dual_demod_init,
+};
+
+static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner      = 1,
+	.if2           = 45600,
+};
+
+static const struct mb86a16_config twinhan_vp1027 = {
+	.demod_address  = 0x08,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { 0x89, 0x38, 0x38 };
+	static const u8 reset[]         = { 0x50, 0x80 };
+	static const u8 adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static const u8 agc_cfg[]       = { 0x67, 0x10, 0x20, 0x00, 0xFF, 0xFF,
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
+	static const u8 dntv_extra[]     = { 0xB5, 0x7A };
+	static const u8 capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(2000);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	udelay(2000);
+	mt352_write(fe, dntv_extra,     sizeof(dntv_extra));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static const struct mt352_config dntv_live_dvbt_pro_config = {
+	.demod_address = 0x0f,
+	.no_tuner      = 1,
+	.demod_init    = dntv_live_dvbt_pro_demod_init,
+};
+#endif
+
+static const struct zl10353_config dvico_fusionhdtv_hybrid = {
+	.demod_address = 0x0f,
+	.no_tuner      = 1,
+};
+
+static const struct zl10353_config dvico_fusionhdtv_xc3028 = {
+	.demod_address = 0x0f,
+	.if2           = 45600,
+	.no_tuner      = 1,
+};
+
+static const struct mt352_config dvico_fusionhdtv_mt352_xc3028 = {
+	.demod_address = 0x0f,
+	.if2 = 4560,
+	.no_tuner = 1,
+	.demod_init = dvico_fusionhdtv_demod_init,
+};
+
+static const struct zl10353_config dvico_fusionhdtv_plus_v1_1 = {
+	.demod_address = 0x0f,
+};
+
+static const struct cx22702_config connexant_refboard_config = {
+	.demod_address = 0x43,
+	.output_mode   = CX22702_SERIAL_OUTPUT,
+};
+
+static const struct cx22702_config hauppauge_hvr_config = {
+	.demod_address = 0x63,
+	.output_mode   = CX22702_SERIAL_OUTPUT,
+};
+
+static int or51132_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
+	return 0;
+}
+
+static const struct or51132_config pchdtv_hd3000 = {
+	.demod_address = 0x15,
+	.set_ts_params = or51132_set_ts_param,
+};
+
+static int lgdt330x_pll_rf_set(struct dvb_frontend *fe, int index)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	dprintk(1, "%s: index = %d\n", __func__, index);
+	if (index == 0)
+		cx_clear(MO_GP0_IO, 8);
+	else
+		cx_set(MO_GP0_IO, 8);
+	return 0;
+}
+
+static int lgdt330x_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	if (is_punctured)
+		dev->ts_gen_cntrl |= 0x04;
+	else
+		dev->ts_gen_cntrl &= ~0x04;
+	return 0;
+}
+
+static struct lgdt330x_config fusionhdtv_3_gold = {
+	.demod_chip    = LGDT3302,
+	.serial_mpeg   = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static const struct lgdt330x_config fusionhdtv_5_gold = {
+	.demod_chip    = LGDT3303,
+	.serial_mpeg   = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static const struct lgdt330x_config pchdtv_hd5500 = {
+	.demod_chip    = LGDT3303,
+	.serial_mpeg   = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static int nxt200x_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
+	return 0;
+}
+
+static const struct nxt200x_config ati_hdtvwonder = {
+	.demod_address = 0x0a,
+	.set_ts_params = nxt200x_set_ts_param,
+};
+
+static int cx24123_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0x02;
+	return 0;
+}
+
+static int kworld_dvbs_100_set_voltage(struct dvb_frontend *fe,
+				       enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	if (voltage == SEC_VOLTAGE_OFF)
+		cx_write(MO_GP0_IO, 0x000006fb);
+	else
+		cx_write(MO_GP0_IO, 0x000006f9);
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe,
+				      enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	if (voltage == SEC_VOLTAGE_OFF) {
+		dprintk(1, "LNB Voltage OFF\n");
+		cx_write(MO_GP0_IO, 0x0000efff);
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int tevii_dvbs_set_voltage(struct dvb_frontend *fe,
+				  enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	cx_set(MO_GP0_IO, 0x6040);
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx_clear(MO_GP0_IO, 0x20);
+		break;
+	case SEC_VOLTAGE_18:
+		cx_set(MO_GP0_IO, 0x20);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx_clear(MO_GP0_IO, 0x20);
+		break;
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int vp1027_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		dprintk(1, "LNB SEC Voltage=13\n");
+		cx_write(MO_GP0_IO, 0x00001220);
+		break;
+	case SEC_VOLTAGE_18:
+		dprintk(1, "LNB SEC Voltage=18\n");
+		cx_write(MO_GP0_IO, 0x00001222);
+		break;
+	case SEC_VOLTAGE_OFF:
+		dprintk(1, "LNB Voltage OFF\n");
+		cx_write(MO_GP0_IO, 0x00001230);
+		break;
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static const struct cx24123_config geniatech_dvbs_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24123_set_ts_param,
+};
+
+static const struct cx24123_config hauppauge_novas_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24123_set_ts_param,
+};
+
+static const struct cx24123_config kworld_dvbs_100_config = {
+	.demod_address = 0x15,
+	.set_ts_params = cx24123_set_ts_param,
+	.lnb_polarity  = 1,
+};
+
+static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_PARALLEL_OUTPUT,
+	.gpio	       = S5H1409_GPIO_ON,
+	.qam_if	       = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct s5h1409_config kworld_atsc_120_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio	       = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
+	.i2c_address	= 0x64,
+	.if_khz		= 5380,
+};
+
+static const struct zl10353_config cx88_pinnacle_hybrid_pctv = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner      = 1,
+	.if2           = 45600,
+};
+
+static const struct zl10353_config cx88_geniatech_x8000_mt = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static const struct s5h1411_config dvico_fusionhdtv7_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING
+};
+
+static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
+	.i2c_address    = 0xc2 >> 1,
+	.if_khz         = 5380,
+};
+
+static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
+{
+	struct dvb_frontend *fe;
+	struct vb2_dvb_frontend *fe0 = NULL;
+	struct xc2028_ctrl ctl;
+	struct xc2028_config cfg = {
+		.i2c_adap  = &dev->core->i2c_adap,
+		.i2c_addr  = addr,
+		.ctrl      = &ctl,
+	};
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		pr_err("dvb frontend not attached. Can't attach xc3028\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Some xc3028 devices may be hidden by an I2C gate. This is known
+	 * to happen with some s5h1409-based devices.
+	 * Now that I2C gate is open, sets up xc3028 configuration
+	 */
+	cx88_setup_xc3028(dev->core, &ctl);
+
+	fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
+	if (!fe) {
+		pr_err("xc3028 attach failed\n");
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	pr_info("xc3028 attached\n");
+
+	return 0;
+}
+
+static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct vb2_dvb_frontend *fe0 = NULL;
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		pr_err("dvb frontend not attached. Can't attach xc4000\n");
+		return -EINVAL;
+	}
+
+	fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap,
+			cfg);
+	if (!fe) {
+		pr_err("xc4000 attach failed\n");
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	pr_info("xc4000 attached\n");
+
+	return 0;
+}
+
+static int cx24116_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0x2;
+
+	return 0;
+}
+
+static int stv0900_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0;
+
+	return 0;
+}
+
+static int cx24116_reset_device(struct dvb_frontend *fe)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	/* Reset the part */
+	/* Put the cx24116 into reset */
+	cx_write(MO_SRST_IO, 0);
+	usleep_range(10000, 20000);
+	/* Take the cx24116 out of reset */
+	cx_write(MO_SRST_IO, 1);
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static const struct cx24116_config hauppauge_hvr4000_config = {
+	.demod_address          = 0x05,
+	.set_ts_params          = cx24116_set_ts_param,
+	.reset_device           = cx24116_reset_device,
+};
+
+static const struct cx24116_config tevii_s460_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24116_set_ts_param,
+	.reset_device  = cx24116_reset_device,
+};
+
+static int ds3000_set_ts_param(struct dvb_frontend *fe,
+			       int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 4;
+
+	return 0;
+}
+
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
+	.set_ts_params = ds3000_set_ts_param,
+};
+
+static struct ts2020_config tevii_ts2020_config  = {
+	.tuner_address = 0x60,
+	.clk_out_div = 1,
+};
+
+static const struct stv0900_config prof_7301_stv0900_config = {
+	.demod_address = 0x6a,
+/*	demod_mode = 0,*/
+	.xtal = 27000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.tun1_maddress = 0,/* 0x60 */
+	.tun1_adc = 0,/* 2 Vpp */
+	.path1_mode = 3,
+	.set_ts_params = stv0900_set_ts_param,
+};
+
+static const struct stb6100_config prof_7301_stb6100_config = {
+	.tuner_address = 0x60,
+	.refclock = 27000000,
+};
+
+static const struct stv0299_config tevii_tuner_sharp_config = {
+	.demod_address = 0x68,
+	.inittab = sharp_z0194a_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = 1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
+	.set_ts_params = cx24116_set_ts_param,
+};
+
+static const struct stv0288_config tevii_tuner_earda_config = {
+	.demod_address = 0x68,
+	.min_delay_ms = 100,
+	.set_ts_params = cx24116_set_ts_param,
+};
+
+static int cx8802_alloc_frontends(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct vb2_dvb_frontend *fe = NULL;
+	int i;
+
+	mutex_init(&dev->frontends.lock);
+	INIT_LIST_HEAD(&dev->frontends.felist);
+
+	if (!core->board.num_frontends)
+		return -ENODEV;
+
+	pr_info("%s: allocating %d frontend(s)\n", __func__,
+		core->board.num_frontends);
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		fe = vb2_dvb_alloc_frontend(&dev->frontends, i);
+		if (!fe) {
+			pr_err("%s() failed to alloc\n", __func__);
+			vb2_dvb_dealloc_frontends(&dev->frontends);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static const u8 samsung_smt_7020_inittab[] = {
+	     0x01, 0x15,
+	     0x02, 0x00,
+	     0x03, 0x00,
+	     0x04, 0x7D,
+	     0x05, 0x0F,
+	     0x06, 0x02,
+	     0x07, 0x00,
+	     0x08, 0x60,
+
+	     0x0A, 0xC2,
+	     0x0B, 0x00,
+	     0x0C, 0x01,
+	     0x0D, 0x81,
+	     0x0E, 0x44,
+	     0x0F, 0x09,
+	     0x10, 0x3C,
+	     0x11, 0x84,
+	     0x12, 0xDA,
+	     0x13, 0x99,
+	     0x14, 0x8D,
+	     0x15, 0xCE,
+	     0x16, 0xE8,
+	     0x17, 0x43,
+	     0x18, 0x1C,
+	     0x19, 0x1B,
+	     0x1A, 0x1D,
+
+	     0x1C, 0x12,
+	     0x1D, 0x00,
+	     0x1E, 0x00,
+	     0x1F, 0x00,
+	     0x20, 0x00,
+	     0x21, 0x00,
+	     0x22, 0x00,
+	     0x23, 0x00,
+
+	     0x28, 0x02,
+	     0x29, 0x28,
+	     0x2A, 0x14,
+	     0x2B, 0x0F,
+	     0x2C, 0x09,
+	     0x2D, 0x05,
+
+	     0x31, 0x1F,
+	     0x32, 0x19,
+	     0x33, 0xFC,
+	     0x34, 0x13,
+	     0xff, 0xff,
+};
+
+static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct cx8802_dev *dev = fe->dvb->priv;
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = {
+		.addr = 0x61,
+		.flags = 0,
+		.buf = buf,
+		.len = sizeof(buf) };
+
+	div = c->frequency / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x84;  /* 0xC4 */
+	buf[3] = 0x00;
+
+	if (c->frequency < 1500000)
+		buf[3] |= 0x10;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static int samsung_smt_7020_set_tone(struct dvb_frontend *fe,
+				     enum fe_sec_tone_mode tone)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	cx_set(MO_GP0_IO, 0x0800);
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		cx_set(MO_GP0_IO, 0x08);
+		break;
+	case SEC_TONE_OFF:
+		cx_clear(MO_GP0_IO, 0x08);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	u8 data;
+	struct i2c_msg msg = {
+		.addr = 8,
+		.flags = 0,
+		.buf = &data,
+		.len = sizeof(data) };
+
+	cx_set(MO_GP0_IO, 0x8000);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		break;
+	case SEC_VOLTAGE_13:
+		data = ISL6421_EN1 | ISL6421_LLC1;
+		cx_clear(MO_GP0_IO, 0x80);
+		break;
+	case SEC_VOLTAGE_18:
+		data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1;
+		cx_clear(MO_GP0_IO, 0x80);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe,
+						    u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7;
+		bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7;
+		bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7;
+		bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7;
+		bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6;
+		bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4;
+		bclk = 0x51;
+	}
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+	return 0;
+}
+
+static const struct stv0299_config samsung_stv0299_config = {
+	.demod_address = 0x68,
+	.inittab = samsung_smt_7020_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_LK,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate,
+};
+
+static int dvb_register(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct vb2_dvb_frontend *fe0, *fe1 = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+	int res = -EINVAL;
+
+	if (core->i2c_rc != 0) {
+		pr_err("no i2c-bus available, cannot attach dvb drivers\n");
+		goto frontend_detach;
+	}
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		goto frontend_detach;
+
+	/* multi-frontend gate control is undefined or defaults to fe0 */
+	dev->frontends.gate = 0;
+
+	/* Sets the gate control callback to be used by i2c command calls */
+	core->gate_ctrl = cx88_dvb_gate_ctrl;
+
+	/* init frontend(s) */
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &connexant_refboard_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, &core->i2c_adap,
+					DVB_PLL_THOMSON_DTT759X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
+	case CX88_BOARD_CONEXANT_DVB_T1:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
+	case CX88_BOARD_WINFAST_DTV1000:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &connexant_refboard_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, &core->i2c_adap,
+					DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV2000H:
+	case CX88_BOARD_HAUPPAUGE_HVR1100:
+	case CX88_BOARD_HAUPPAUGE_HVR1100LP:
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV2000H_J:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216MEX_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+		/* MFE frontend 1 */
+		mfe_shared = 1;
+		dev->frontends.gate = 2;
+		/* DVB-S init */
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &hauppauge_novas_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		/* MFE frontend 2 */
+		fe1 = vb2_dvb_get_frontend(&dev->frontends, 2);
+		if (!fe1)
+			goto frontend_detach;
+		/* DVB-T init */
+		fe1->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &dev->core->i2c_adap);
+		if (fe1->dvb.frontend) {
+			fe1->dvb.frontend->id = 1;
+			if (!dvb_attach(simple_tuner_attach,
+					fe1->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x61, TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+			break;
+		}
+		/* ZL10353 replaces MT352 on later cards */
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_plus_v1_1,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
+		/*
+		 * The tin box says DEE1601, but it seems to be DTT7579
+		 * compatible, with a slightly different MT352 AGC gain.
+		 */
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv_dual,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+			break;
+		}
+		/* ZL10353 replaces MT352 on later cards */
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_plus_v1_1,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_LG_Z201))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_DNTV_LIVE_DVB_T:
+	case CX88_BOARD_ADSTECH_DVB_T_PCI:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dntv_live_dvbt_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_UNKNOWN_1))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+		/* MT352 is on a secondary I2C bus made from some GPIO lines */
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dntv_live_dvbt_pro_config,
+					       &dev->vp3054->adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+#else
+		pr_err("built without vp3054 support\n");
+#endif
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_hybrid,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_FE6600))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &core->i2c_adap);
+		if (!fe0->dvb.frontend)
+			fe0->dvb.frontend = dvb_attach(mt352_attach,
+						&dvico_fusionhdtv_mt352_xc3028,
+						&core->i2c_adap);
+		/*
+		 * On this board, the demod provides the I2C bus pullup.
+		 * We must not permit gate_ctrl to be performed, or
+		 * the xc3028 cannot communicate on the bus.
+		 */
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_PCHDTV_HD3000:
+		fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_DTT761X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+
+		/* Select RF connector callback */
+		fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_3_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_MICROTUNE_4042FI5))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 9);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_3_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_DTT761X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_5_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_LG_TDVS_H06XF))
+				goto frontend_detach;
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x43))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PCHDTV_HD5500:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &pchdtv_hd5500,
+					       0x59,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_LG_TDVS_H06XF))
+				goto frontend_detach;
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x43))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_ATI_HDTVWONDER:
+		fe0->dvb.frontend = dvb_attach(nxt200x_attach,
+					       &ati_hdtvwonder,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_TUV1236D))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &hauppauge_novas_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			bool override_tone;
+
+			if (core->model == 92001)
+				override_tone = true;
+			else
+				override_tone = false;
+
+			if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x08, ISL6421_DCL,
+					0x00, override_tone))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_KWORLD_DVBS_100:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &kworld_dvbs_100_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_DVBS:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &geniatech_dvbs_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
+		}
+		break;
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &pinnacle_pctv_hd_800i_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+					&core->i2c_adap,
+					&pinnacle_pctv_hd_800i_tuner_config))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &dvico_hdtv5_pci_nano_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &core->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.scode_table = XC3028_FE_OREN538,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe && fe->ops.tuner_ops.set_config)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX88_BOARD_NOTONLYTV_LV3H:
+	case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+	case CX88_BOARD_WINFAST_DTV1800H:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc3028(0x61, dev) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct xc4000_config cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc4000(dev, &cfg) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
+		dev->ts_gen_cntrl = 0x00;
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_geniatech_x8000_mt,
+					       &core->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_KWORLD_ATSC_120:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &kworld_atsc_120_config,
+					       &core->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &dvico_fusionhdtv7_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+					&core->i2c_adap,
+					&dvico_fusionhdtv7_tuner_config))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* MFE frontend 1 */
+		mfe_shared = 1;
+		dev->frontends.gate = 2;
+		/* DVB-S/S2 Init */
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		/* MFE frontend 2 */
+		fe1 = vb2_dvb_get_frontend(&dev->frontends, 2);
+		if (!fe1)
+			goto frontend_detach;
+		/* DVB-T Init */
+		fe1->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &dev->core->i2c_adap);
+		if (fe1->dvb.frontend) {
+			fe1->dvb.frontend->id = 1;
+			if (!dvb_attach(simple_tuner_attach,
+					fe1->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x61, TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PROF_6200:
+	case CX88_BOARD_TBS_8910:
+	case CX88_BOARD_TEVII_S420:
+		fe0->dvb.frontend = dvb_attach(stv0299_attach,
+						&tevii_tuner_sharp_config,
+						&core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
+					&core->i2c_adap, DVB_PLL_OPERA1))
+				goto frontend_detach;
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+
+		} else {
+			fe0->dvb.frontend = dvb_attach(stv0288_attach,
+							    &tevii_tuner_earda_config,
+							    &core->i2c_adap);
+			if (fe0->dvb.frontend) {
+				if (!dvb_attach(stb6000_attach,
+						fe0->dvb.frontend, 0x61,
+						&core->i2c_adap))
+					goto frontend_detach;
+				core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+				fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+			}
+		}
+		break;
+	case CX88_BOARD_TEVII_S460:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &tevii_s460_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+		break;
+	case CX88_BOARD_TEVII_S464:
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+						&tevii_ds3000_config,
+						&core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			dvb_attach(ts2020_attach, fe0->dvb.frontend,
+				   &tevii_ts2020_config, &core->i2c_adap);
+			fe0->dvb.frontend->ops.set_voltage =
+							tevii_dvbs_set_voltage;
+		}
+		break;
+	case CX88_BOARD_OMICOM_SS4_PCI:
+	case CX88_BOARD_TBS_8920:
+	case CX88_BOARD_PROF_7300:
+	case CX88_BOARD_SATTRADE_ST4200:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+		break;
+	case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_terratec_cinergy_ht_pci_mkii_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc3028(0x61, dev) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PROF_7301:{
+		struct dvb_tuner_ops *tuner_ops = NULL;
+
+		fe0->dvb.frontend = dvb_attach(stv0900_attach,
+					       &prof_7301_stv0900_config,
+					       &core->i2c_adap, 0);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(stb6100_attach, fe0->dvb.frontend,
+					&prof_7301_stb6100_config,
+					&core->i2c_adap))
+				goto frontend_detach;
+
+			tuner_ops = &fe0->dvb.frontend->ops.tuner_ops;
+			tuner_ops->set_frequency = stb6100_set_freq;
+			tuner_ops->get_frequency = stb6100_get_freq;
+			tuner_ops->set_bandwidth = stb6100_set_bandw;
+			tuner_ops->get_bandwidth = stb6100_get_bandw;
+
+			core->prev_set_voltage =
+					fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+					tevii_dvbs_set_voltage;
+		}
+		break;
+		}
+	case CX88_BOARD_SAMSUNG_SMT_7020:
+		dev->ts_gen_cntrl = 0x08;
+
+		cx_set(MO_GP0_IO, 0x0101);
+
+		cx_clear(MO_GP0_IO, 0x01);
+		msleep(100);
+		cx_set(MO_GP0_IO, 0x01);
+		msleep(200);
+
+		fe0->dvb.frontend = dvb_attach(stv0299_attach,
+					       &samsung_stv0299_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.tuner_ops.set_params =
+				samsung_smt_7020_tuner_set_params;
+			fe0->dvb.frontend->tuner_priv =
+				&dev->core->i2c_adap;
+			fe0->dvb.frontend->ops.set_voltage =
+				samsung_smt_7020_set_voltage;
+			fe0->dvb.frontend->ops.set_tone =
+				samsung_smt_7020_set_tone;
+		}
+
+		break;
+	case CX88_BOARD_TWINHAN_VP1027_DVBS:
+		dev->ts_gen_cntrl = 0x00;
+		fe0->dvb.frontend = dvb_attach(mb86a16_attach,
+					       &twinhan_vp1027,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage =
+					fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+					vp1027_set_voltage;
+		}
+		break;
+
+	default:
+		pr_err("The frontend of your DVB/ATSC card isn't supported yet\n");
+		break;
+	}
+
+	if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
+		pr_err("frontend initialization failed\n");
+		goto frontend_detach;
+	}
+	/* define general-purpose callback pointer */
+	fe0->dvb.frontend->callback = cx88_tuner_callback;
+
+	/* Ensure all frontends negotiate bus access */
+	fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+	if (fe1)
+		fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+
+	/* Put the tuner in standby to keep it quiet */
+	call_all(core, tuner, standby);
+
+	/* register everything */
+	res = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+				   &dev->pci->dev, NULL, adapter_nr,
+				   mfe_shared);
+	if (res)
+		goto frontend_detach;
+	return res;
+
+frontend_detach:
+	core->gate_ctrl = NULL;
+	vb2_dvb_dealloc_frontends(&dev->frontends);
+	return res;
+}
+
+/* ----------------------------------------------------------- */
+
+/* CX8802 MPEG -> mini driver - We have been given the hardware */
+static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	dprintk(1, "%s\n", __func__);
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/* We arrive here with either the cx23416 or the cx22702
+		 * on the bus. Take the bus from the cx23416 and enable the
+		 * cx22702 demod
+		 */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		/* enable the cx22702 pins */
+		cx_clear(MO_GP0_IO, 0x00000004);
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		switch (core->dvbdev->frontends.active_fe_id) {
+		case 1: /* DVB-S/S2 Enabled */
+			/* tri-state the cx22702 pins */
+			cx_set(MO_GP0_IO, 0x00000004);
+			/* Take the cx24116/cx24123 out of reset */
+			cx_write(MO_SRST_IO, 1);
+			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
+			break;
+		case 2: /* DVB-T Enabled */
+			/* Put the cx24116/cx24123 into reset */
+			cx_write(MO_SRST_IO, 0);
+			/* enable the cx22702 pins */
+			cx_clear(MO_GP0_IO, 0x00000004);
+			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
+			break;
+		}
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		/* set RF input to AIR for DVB-T (GPIO 16) */
+		cx_write(MO_GP2_IO, 0x0101);
+		break;
+
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+/* CX8802 MPEG -> mini driver - We no longer have the hardware */
+static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	dprintk(1, "%s\n", __func__);
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/* Do Nothing, leave the cx22702 on the bus. */
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		break;
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+static int cx8802_dvb_probe(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = drv->core->dvbdev;
+	int err;
+	struct vb2_dvb_frontend *fe;
+	int i;
+
+	dprintk(1, "%s\n", __func__);
+	dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+		core->boardnr,
+		core->name,
+		core->pci_bus,
+		core->pci_slot);
+
+	err = -ENODEV;
+	if (!(core->board.mpeg & CX88_MPEG_DVB))
+		goto fail_core;
+
+	/* If vp3054 isn't enabled, a stub will just return 0 */
+	err = vp3054_i2c_probe(dev);
+	if (err != 0)
+		goto fail_core;
+
+	/* dvb stuff */
+	pr_info("cx2388x based DVB/ATSC card\n");
+	dev->ts_gen_cntrl = 0x0c;
+
+	err = cx8802_alloc_frontends(dev);
+	if (err)
+		goto fail_core;
+
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		struct vb2_queue *q;
+
+		fe = vb2_dvb_get_frontend(&core->dvbdev->frontends, i);
+		if (!fe) {
+			pr_err("%s() failed to get frontend(%d)\n",
+			       __func__, i);
+			err = -ENODEV;
+			goto fail_probe;
+		}
+		q = &fe->dvb.dvbq;
+		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+		q->gfp_flags = GFP_DMA32;
+		q->min_buffers_needed = 2;
+		q->drv_priv = dev;
+		q->buf_struct_size = sizeof(struct cx88_buffer);
+		q->ops = &dvb_qops;
+		q->mem_ops = &vb2_dma_sg_memops;
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->lock = &core->lock;
+		q->dev = &dev->pci->dev;
+
+		err = vb2_queue_init(q);
+		if (err < 0)
+			goto fail_probe;
+
+		/* init struct vb2_dvb */
+		fe->dvb.name = dev->core->name;
+	}
+
+	err = dvb_register(dev);
+	if (err)
+		/* frontends/adapter de-allocated in dvb_register */
+		pr_err("dvb_register failed (err = %d)\n", err);
+	return err;
+fail_probe:
+	vb2_dvb_dealloc_frontends(&core->dvbdev->frontends);
+fail_core:
+	return err;
+}
+
+static int cx8802_dvb_remove(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = drv->core->dvbdev;
+
+	dprintk(1, "%s\n", __func__);
+
+	vb2_dvb_unregister_bus(&dev->frontends);
+
+	vp3054_i2c_remove(dev);
+
+	core->gate_ctrl = NULL;
+
+	return 0;
+}
+
+static struct cx8802_driver cx8802_dvb_driver = {
+	.type_id        = CX88_MPEG_DVB,
+	.hw_access      = CX8802_DRVCTL_SHARED,
+	.probe          = cx8802_dvb_probe,
+	.remove         = cx8802_dvb_remove,
+	.advise_acquire = cx8802_dvb_advise_acquire,
+	.advise_release = cx8802_dvb_advise_release,
+};
+
+static int __init dvb_init(void)
+{
+	pr_info("cx2388x dvb driver version %s loaded\n", CX88_VERSION);
+	return cx8802_register_driver(&cx8802_dvb_driver);
+}
+
+static void __exit dvb_fini(void)
+{
+	cx8802_unregister_driver(&cx8802_dvb_driver);
+}
+
+module_init(dvb_init);
+module_exit(dvb_fini);