Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 187 insertions, 0 deletions

diff --git a/drivers/media/pci/dt3155/dt3155.h b/drivers/media/pci/dt3155/dt3155.h
new file mode 100644
index 0000000000..c9ce79cb55
--- /dev/null
+++ b/drivers/media/pci/dt3155/dt3155.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/***************************************************************************
+ *   Copyright (C) 2006-2010 by Marin Mitov                                *
+ *   mitov@issp.bas.bg                                                     *
+ *                                                                         *
+ *                                                                         *
+ ***************************************************************************/
+
+/*    DT3155 header file    */
+#ifndef _DT3155_H_
+#define _DT3155_H_
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+#define DT3155_NAME "dt3155"
+#define DT3155_VER_MAJ 2
+#define DT3155_VER_MIN 0
+#define DT3155_VER_EXT 0
+#define DT3155_VERSION  __stringify(DT3155_VER_MAJ)	"."		\
+			__stringify(DT3155_VER_MIN)	"."		\
+			__stringify(DT3155_VER_EXT)
+
+/* DT3155 Base Register offsets (memory mapped) */
+#define EVEN_DMA_START	 0x00
+#define ODD_DMA_START	 0x0C
+#define EVEN_DMA_STRIDE  0x18
+#define ODD_DMA_STRIDE	 0x24
+#define EVEN_PIXEL_FMT	 0x30
+#define ODD_PIXEL_FMT	 0x34
+#define FIFO_TRIGGER	 0x38
+#define XFER_MODE	 0x3C
+#define CSR1		 0x40
+#define RETRY_WAIT_CNT	 0x44
+#define INT_CSR		 0x48
+#define EVEN_FLD_MASK	 0x4C
+#define ODD_FLD_MASK	 0x50
+#define MASK_LENGTH	 0x54
+#define FIFO_FLAG_CNT	 0x58
+#define IIC_CLK_DUR	 0x5C
+#define IIC_CSR1	 0x60
+#define IIC_CSR2	 0x64
+
+/*  DT3155 Internal Registers indexes (i2c/IIC mapped) */
+#define CSR2	     0x10
+#define EVEN_CSR     0x11
+#define ODD_CSR      0x12
+#define CONFIG	     0x13
+#define DT_ID	     0x1F
+#define X_CLIP_START 0x20
+#define Y_CLIP_START 0x22
+#define X_CLIP_END   0x24
+#define Y_CLIP_END   0x26
+#define AD_ADDR      0x30
+#define AD_LUT	     0x31
+#define AD_CMD	     0x32
+#define DIG_OUT      0x40
+#define PM_LUT_ADDR  0x50
+#define PM_LUT_DATA  0x51
+
+/* AD command register values  */
+#define AD_CMD_REG   0x00
+#define AD_POS_REF   0x01
+#define AD_NEG_REF   0x02
+
+/* CSR1 bit masks */
+#define RANGE_EN       0x00008000
+#define CRPT_DIS       0x00004000
+#define ADDR_ERR_ODD   0x00000800
+#define ADDR_ERR_EVEN  0x00000400
+#define FLD_CRPT_ODD   0x00000200
+#define FLD_CRPT_EVEN  0x00000100
+#define FIFO_EN        0x00000080
+#define SRST	       0x00000040
+#define FLD_DN_ODD     0x00000020
+#define FLD_DN_EVEN    0x00000010
+/*   These should not be used.
+ *   Use CAP_CONT_ODD/EVEN instead
+#define CAP_SNGL_ODD   0x00000008
+#define CAP_SNGL_EVEN  0x00000004
+*/
+#define CAP_CONT_ODD   0x00000002
+#define CAP_CONT_EVEN  0x00000001
+
+/*  INT_CSR bit masks */
+#define FLD_START_EN	 0x00000400
+#define FLD_END_ODD_EN	 0x00000200
+#define FLD_END_EVEN_EN  0x00000100
+#define FLD_START	 0x00000004
+#define FLD_END_ODD	 0x00000002
+#define FLD_END_EVEN	 0x00000001
+
+/* IIC_CSR1 bit masks */
+#define DIRECT_ABORT	 0x00000200
+
+/* IIC_CSR2 bit masks */
+#define NEW_CYCLE   0x01000000
+#define DIR_RD	    0x00010000
+#define IIC_READ    0x01010000
+#define IIC_WRITE   0x01000000
+
+/* CSR2 bit masks */
+#define DISP_PASS     0x40
+#define BUSY_ODD      0x20
+#define BUSY_EVEN     0x10
+#define SYNC_PRESENT  0x08
+#define VT_50HZ       0x04
+#define SYNC_SNTL     0x02
+#define CHROM_FILT    0x01
+#define VT_60HZ       0x00
+
+/* CSR_EVEN/ODD bit masks */
+#define CSR_ERROR	0x04
+#define CSR_SNGL	0x02
+#define CSR_DONE	0x01
+
+/* CONFIG bit masks */
+#define PM_LUT_PGM     0x80
+#define PM_LUT_SEL     0x40
+#define CLIP_EN        0x20
+#define HSCALE_EN      0x10
+#define EXT_TRIG_UP    0x0C
+#define EXT_TRIG_DOWN  0x04
+#define ACQ_MODE_NEXT  0x02
+#define ACQ_MODE_ODD   0x01
+#define ACQ_MODE_EVEN  0x00
+
+/* AD_CMD bit masks */
+#define VIDEO_CNL_1  0x00
+#define VIDEO_CNL_2  0x40
+#define VIDEO_CNL_3  0x80
+#define VIDEO_CNL_4  0xC0
+#define SYNC_CNL_1   0x00
+#define SYNC_CNL_2   0x10
+#define SYNC_CNL_3   0x20
+#define SYNC_CNL_4   0x30
+#define SYNC_LVL_1   0x00
+#define SYNC_LVL_2   0x04
+#define SYNC_LVL_3   0x08
+#define SYNC_LVL_4   0x0C
+
+/* DT3155 identificator */
+#define DT3155_ID   0x20
+
+/*    per board private data structure   */
+/**
+ * struct dt3155_priv - private data structure
+ *
+ * @v4l2_dev:		v4l2_device structure
+ * @vdev:		video_device structure
+ * @pdev:		pointer to pci_dev structure
+ * @vidq:		vb2_queue structure
+ * @curr_buf:		pointer to curren buffer
+ * @mux:		mutex to protect the instance
+ * @dmaq:		queue for dma buffers
+ * @lock:		spinlock for dma queue
+ * @std:		input standard
+ * @width:		frame width
+ * @height:		frame height
+ * @input:		current input
+ * @sequence:		frame counter
+ * @stats:		statistics structure
+ * @regs:		local copy of mmio base register
+ * @csr2:		local copy of csr2 register
+ * @config:		local copy of config register
+ */
+struct dt3155_priv {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct pci_dev *pdev;
+	struct vb2_queue vidq;
+	struct vb2_v4l2_buffer *curr_buf;
+	struct mutex mux;
+	struct list_head dmaq;
+	spinlock_t lock;
+	v4l2_std_id std;
+	unsigned width, height;
+	unsigned input;
+	unsigned int sequence;
+	void __iomem *regs;
+	u8 csr2, config;
+};
+
+#endif /*  _DT3155_H_  */