Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 943 insertions, 0 deletions

diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c
new file mode 100644
index 0000000000..3ac6e83934
--- /dev/null
+++ b/drivers/media/pci/saa7164/saa7164-cards.c
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "saa7164.h"
+
+/* The Bridge API needs to understand register widths (in bytes) for the
+ * attached I2C devices, so we can simplify the virtual i2c mechansms
+ * and keep the -i2c.c implementation clean.
+ */
+#define REGLEN_0bit	0
+#define REGLEN_8bit	1
+#define REGLEN_16bit	2
+
+struct saa7164_board saa7164_boards[] = {
+	[SAA7164_BOARD_UNKNOWN] = {
+		/* Bridge will not load any firmware, without knowing
+		 * the rev this would be fatal. */
+		.name		= "Unknown",
+	},
+	[SAA7164_BOARD_UNKNOWN_REV2] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev2",
+		.chiprev	= SAA7164_CHIP_REV2,
+	},
+	[SAA7164_BOARD_UNKNOWN_REV3] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev3",
+		.chiprev	= SAA7164_CHIP_REV3,
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x20,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x29,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x21,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = {
+		.name		= "Hauppauge WinTV-HVR2255(proto)",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255] = {
+		.name		= "Hauppauge WinTV-HVR2255",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
+		.name		= "Hauppauge WinTV-HVR2205",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc8 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xcc >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		} },
+	},
+};
+const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct saa7164_subid saa7164_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x8880,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8810,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8980,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8900,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8901,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x88A1,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8891,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8851,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8940,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8953,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf111,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255,
+		/* Prototype card left here for documentation purposes.
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
+		*/
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf123,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf120,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+	},
+};
+const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
+
+void saa7164_card_list(struct saa7164_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk(KERN_ERR
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+			"%s: be autodetected. Pass card=<n> insmod option to\n"
+			"%s: workaround that. Send complaints to the vendor\n"
+			"%s: of the TV card. Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk(KERN_ERR
+			"%s: Your board isn't known (yet) to the driver.\n"
+			"%s: Try to pick one of the existing card configs via\n"
+			"%s: card=<n> insmod option.  Updating to the latest\n"
+			"%s: version might help as well.\n",
+			dev->name, dev->name, dev->name, dev->name);
+	}
+
+	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
+	       dev->name);
+
+	for (i = 0; i < saa7164_bcount; i++)
+		printk(KERN_ERR "%s:    card=%d -> %s\n",
+		       dev->name, i, saa7164_boards[i].name);
+}
+
+/* TODO: clean this define up into the -cards.c structs */
+#define PCIEBRIDGE_UNITID 2
+
+void saa7164_gpio_setup(struct saa7164_dev *dev)
+{
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+		/*
+		HVR2200 / HVR2250
+		GPIO 2: s5h1411 / tda10048-1 demod reset
+		GPIO 3: s5h1411 / tda10048-2 demod reset
+		GPIO 7: IRBlaster Zilog reset
+		 */
+
+		/* HVR2255
+		 * GPIO 2: lgdg3306-1 demod reset
+		 * GPIO 3: lgdt3306-2 demod reset
+		 */
+
+		/* HVR2205
+		 * GPIO 2: si2168-1 demod reset
+		 * GPIO 3: si2168-2 demod reset
+		 */
+
+		/* Reset parts by going in and out of reset */
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+
+		msleep(20);
+
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+		break;
+	}
+}
+
+static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&tv, eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 88001:
+		/* Development board - Limit circulation */
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+	case 88021:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
+		break;
+	case 88041:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+		break;
+	case 88061:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
+		break;
+	case 89519:
+	case 89609:
+		/* WinTV-HVR2200 (PCIe, Retail, full-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 89619:
+		/* WinTV-HVR2200 (PCIe, Retail, half-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 151009:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, full-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151609:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, half-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151061:
+		/* First production board rev B1I6 */
+		/* WinTV-HVR2255 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */
+		break;
+	default:
+		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
+		tv.model);
+}
+
+void saa7164_card_setup(struct saa7164_dev *dev)
+{
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		if (saa7164_api_read_eeprom(dev, &eeprom[0],
+			sizeof(eeprom)) < 0)
+			return;
+	}
+
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+		hauppauge_eeprom(dev, &eeprom[0]);
+		break;
+	}
+}
+
+/* With most other drivers, the kernel expects to communicate with subdrivers
+ * through i2c. This bridge does not allow that, it does not expose any direct
+ * access to I2C. Instead we have to communicate through the device f/w for
+ * register access to 'processing units'. Each unit has a unique
+ * id, regardless of how the physical implementation occurs across
+ * the three physical i2c buses. The being said if we want leverge of
+ * the existing kernel drivers for tuners and demods we have to 'speak i2c',
+ * to this bridge implements 3 virtual i2c buses. This is a helper function
+ * for those.
+ *
+ * Description: Translate the kernels notion of an i2c address and bus into
+ * the appropriate unitid.
+ */
+int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the saa7164 unique
+	 * unitid. < 0 on error */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->id;
+	}
+
+	return -1;
+}
+
+/* The 7164 API needs to know the i2c register length in advance.
+ * this is a helper function. Based on a specific chip addr and bus return the
+ * reg length.
+ */
+int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the
+	 * saa7164 registry address width. < 0 on error
+	 */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->i2c_reg_len;
+	}
+
+	return -1;
+}
+/* TODO: implement a 'findeeprom' functio like the above and fix any other
+ * eeprom related todo's in -api.c.
+ */
+
+/* Translate a unitid into a x readable device name, for display purposes.  */
+char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
+{
+	char *undefed = "UNDEFINED";
+	char *bridge = "BRIDGE";
+	struct saa7164_unit *unit;
+	int i;
+
+	if (unitid == 0)
+		return bridge;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if (unitid == unit->id)
+				return unit->name;
+	}
+
+	return undefed;
+}
+