Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 286 insertions, 0 deletions

diff --git a/drivers/media/platform/renesas/vsp1/vsp1_clu.c b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
new file mode 100644
index 000000000..c5217fee2
--- /dev/null
+++ b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vsp1_clu.c  --  R-Car VSP1 Cubic Look-Up Table
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_clu.h"
+#include "vsp1_dl.h"
+
+#define CLU_MIN_SIZE				4U
+#define CLU_MAX_SIZE				8190U
+
+#define CLU_SIZE				(17 * 17 * 17)
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline void vsp1_clu_write(struct vsp1_clu *clu,
+				  struct vsp1_dl_body *dlb, u32 reg, u32 data)
+{
+	vsp1_dl_body_write(dlb, reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+#define V4L2_CID_VSP1_CLU_TABLE			(V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_VSP1_CLU_MODE			(V4L2_CID_USER_BASE | 0x1002)
+#define V4L2_CID_VSP1_CLU_MODE_2D		0
+#define V4L2_CID_VSP1_CLU_MODE_3D		1
+
+static int clu_set_table(struct vsp1_clu *clu, struct v4l2_ctrl *ctrl)
+{
+	struct vsp1_dl_body *dlb;
+	unsigned int i;
+
+	dlb = vsp1_dl_body_get(clu->pool);
+	if (!dlb)
+		return -ENOMEM;
+
+	vsp1_dl_body_write(dlb, VI6_CLU_ADDR, 0);
+	for (i = 0; i < CLU_SIZE; ++i)
+		vsp1_dl_body_write(dlb, VI6_CLU_DATA, ctrl->p_new.p_u32[i]);
+
+	spin_lock_irq(&clu->lock);
+	swap(clu->clu, dlb);
+	spin_unlock_irq(&clu->lock);
+
+	vsp1_dl_body_put(dlb);
+	return 0;
+}
+
+static int clu_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vsp1_clu *clu =
+		container_of(ctrl->handler, struct vsp1_clu, ctrls);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VSP1_CLU_TABLE:
+		clu_set_table(clu, ctrl);
+		break;
+
+	case V4L2_CID_VSP1_CLU_MODE:
+		clu->mode = ctrl->val;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops clu_ctrl_ops = {
+	.s_ctrl = clu_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config clu_table_control = {
+	.ops = &clu_ctrl_ops,
+	.id = V4L2_CID_VSP1_CLU_TABLE,
+	.name = "Look-Up Table",
+	.type = V4L2_CTRL_TYPE_U32,
+	.min = 0x00000000,
+	.max = 0x00ffffff,
+	.step = 1,
+	.def = 0,
+	.dims = { 17, 17, 17 },
+};
+
+static const char * const clu_mode_menu[] = {
+	"2D",
+	"3D",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config clu_mode_control = {
+	.ops = &clu_ctrl_ops,
+	.id = V4L2_CID_VSP1_CLU_MODE,
+	.name = "Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.min = 0,
+	.max = 1,
+	.def = 1,
+	.qmenu = clu_mode_menu,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Pad Operations
+ */
+
+static const unsigned int clu_codes[] = {
+	MEDIA_BUS_FMT_ARGB8888_1X32,
+	MEDIA_BUS_FMT_AHSV8888_1X32,
+	MEDIA_BUS_FMT_AYUV8_1X32,
+};
+
+static int clu_enum_mbus_code(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_state *sd_state,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, clu_codes,
+					  ARRAY_SIZE(clu_codes));
+}
+
+static int clu_enum_frame_size(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_state *sd_state,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	return vsp1_subdev_enum_frame_size(subdev, sd_state, fse,
+					   CLU_MIN_SIZE,
+					   CLU_MIN_SIZE, CLU_MAX_SIZE,
+					   CLU_MAX_SIZE);
+}
+
+static int clu_set_format(struct v4l2_subdev *subdev,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *fmt)
+{
+	return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, clu_codes,
+					  ARRAY_SIZE(clu_codes),
+					  CLU_MIN_SIZE, CLU_MIN_SIZE,
+					  CLU_MAX_SIZE, CLU_MAX_SIZE);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static const struct v4l2_subdev_pad_ops clu_pad_ops = {
+	.init_cfg = vsp1_entity_init_cfg,
+	.enum_mbus_code = clu_enum_mbus_code,
+	.enum_frame_size = clu_enum_frame_size,
+	.get_fmt = vsp1_subdev_get_pad_format,
+	.set_fmt = clu_set_format,
+};
+
+static const struct v4l2_subdev_ops clu_ops = {
+	.pad    = &clu_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void clu_configure_stream(struct vsp1_entity *entity,
+				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
+				 struct vsp1_dl_body *dlb)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+	struct v4l2_mbus_framefmt *format;
+
+	/*
+	 * The yuv_mode can't be changed during streaming. Cache it internally
+	 * for future runtime configuration calls.
+	 */
+	format = vsp1_entity_get_pad_format(&clu->entity,
+					    clu->entity.config,
+					    CLU_PAD_SINK);
+	clu->yuv_mode = format->code == MEDIA_BUS_FMT_AYUV8_1X32;
+}
+
+static void clu_configure_frame(struct vsp1_entity *entity,
+				struct vsp1_pipeline *pipe,
+				struct vsp1_dl_list *dl,
+				struct vsp1_dl_body *dlb)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+	struct vsp1_dl_body *clu_dlb;
+	unsigned long flags;
+	u32 ctrl = VI6_CLU_CTRL_AAI | VI6_CLU_CTRL_MVS | VI6_CLU_CTRL_EN;
+
+	/* 2D mode can only be used with the YCbCr pixel encoding. */
+	if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D && clu->yuv_mode)
+		ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D
+		     |  VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D
+		     |  VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D;
+
+	vsp1_clu_write(clu, dlb, VI6_CLU_CTRL, ctrl);
+
+	spin_lock_irqsave(&clu->lock, flags);
+	clu_dlb = clu->clu;
+	clu->clu = NULL;
+	spin_unlock_irqrestore(&clu->lock, flags);
+
+	if (clu_dlb) {
+		vsp1_dl_list_add_body(dl, clu_dlb);
+
+		/* Release our local reference. */
+		vsp1_dl_body_put(clu_dlb);
+	}
+}
+
+static void clu_destroy(struct vsp1_entity *entity)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+
+	vsp1_dl_body_pool_destroy(clu->pool);
+}
+
+static const struct vsp1_entity_operations clu_entity_ops = {
+	.configure_stream = clu_configure_stream,
+	.configure_frame = clu_configure_frame,
+	.destroy = clu_destroy,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_clu *vsp1_clu_create(struct vsp1_device *vsp1)
+{
+	struct vsp1_clu *clu;
+	int ret;
+
+	clu = devm_kzalloc(vsp1->dev, sizeof(*clu), GFP_KERNEL);
+	if (clu == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&clu->lock);
+
+	clu->entity.ops = &clu_entity_ops;
+	clu->entity.type = VSP1_ENTITY_CLU;
+
+	ret = vsp1_entity_init(vsp1, &clu->entity, "clu", 2, &clu_ops,
+			       MEDIA_ENT_F_PROC_VIDEO_LUT);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/*
+	 * Pre-allocate a body pool, with 3 bodies allowing a userspace update
+	 * before the hardware has committed a previous set of tables, handling
+	 * both the queued and pending dl entries. One extra entry is added to
+	 * the CLU_SIZE to allow for the VI6_CLU_ADDR header.
+	 */
+	clu->pool = vsp1_dl_body_pool_create(clu->entity.vsp1, 3, CLU_SIZE + 1,
+					     0);
+	if (!clu->pool)
+		return ERR_PTR(-ENOMEM);
+
+	/* Initialize the control handler. */
+	v4l2_ctrl_handler_init(&clu->ctrls, 2);
+	v4l2_ctrl_new_custom(&clu->ctrls, &clu_table_control, NULL);
+	v4l2_ctrl_new_custom(&clu->ctrls, &clu_mode_control, NULL);
+
+	clu->entity.subdev.ctrl_handler = &clu->ctrls;
+
+	if (clu->ctrls.error) {
+		dev_err(vsp1->dev, "clu: failed to initialize controls\n");
+		ret = clu->ctrls.error;
+		vsp1_entity_destroy(&clu->entity);
+		return ERR_PTR(ret);
+	}
+
+	v4l2_ctrl_handler_setup(&clu->ctrls);
+
+	return clu;
+}