summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc/img-ir
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/media/rc/img-ir
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/media/rc/img-ir')
-rw-r--r--drivers/media/rc/img-ir/Kconfig79
-rw-r--r--drivers/media/rc/img-ir/Makefile14
-rw-r--r--drivers/media/rc/img-ir/img-ir-core.c191
-rw-r--r--drivers/media/rc/img-ir/img-ir-hw.c1147
-rw-r--r--drivers/media/rc/img-ir/img-ir-hw.h297
-rw-r--r--drivers/media/rc/img-ir/img-ir-jvc.c84
-rw-r--r--drivers/media/rc/img-ir/img-ir-nec.c173
-rw-r--r--drivers/media/rc/img-ir/img-ir-raw.c151
-rw-r--r--drivers/media/rc/img-ir/img-ir-raw.h61
-rw-r--r--drivers/media/rc/img-ir/img-ir-rc5.c84
-rw-r--r--drivers/media/rc/img-ir/img-ir-rc6.c113
-rw-r--r--drivers/media/rc/img-ir/img-ir-sanyo.c125
-rw-r--r--drivers/media/rc/img-ir/img-ir-sharp.c102
-rw-r--r--drivers/media/rc/img-ir/img-ir-sony.c161
-rw-r--r--drivers/media/rc/img-ir/img-ir.h169
15 files changed, 2951 insertions, 0 deletions
diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
new file mode 100644
index 0000000000..a80cfcd87a
--- /dev/null
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config IR_IMG
+ tristate "ImgTec IR Decoder"
+ depends on RC_CORE
+ depends on MIPS || COMPILE_TEST
+ select IR_IMG_HW if !IR_IMG_RAW
+ help
+ Say Y or M here if you want to use the ImgTec infrared decoder
+ functionality found in SoCs such as TZ1090.
+
+config IR_IMG_RAW
+ bool "Raw decoder"
+ depends on IR_IMG
+ help
+ Say Y here to enable the raw mode driver which passes raw IR signal
+ changes to the IR raw decoders for software decoding. This is much
+ less reliable (due to lack of timestamps) and consumes more
+ processing power than using hardware decode, but can be useful for
+ testing, debug, and to make more protocols available.
+
+config IR_IMG_HW
+ bool "Hardware decoder"
+ depends on IR_IMG
+ help
+ Say Y here to enable the hardware decode driver which decodes the IR
+ signals in hardware. This is more reliable, consumes less processing
+ power since only a single interrupt is received for each scancode,
+ and allows an IR scancode to be used as a wake event.
+
+config IR_IMG_NEC
+ bool "NEC protocol support"
+ depends on IR_IMG_HW
+ select BITREVERSE
+ help
+ Say Y here to enable support for the NEC, extended NEC, and 32-bit
+ NEC protocols in the ImgTec infrared decoder block.
+
+config IR_IMG_JVC
+ bool "JVC protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the JVC protocol in the ImgTec
+ infrared decoder block.
+
+config IR_IMG_SONY
+ bool "Sony protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the Sony protocol in the ImgTec
+ infrared decoder block.
+
+config IR_IMG_SHARP
+ bool "Sharp protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the Sharp protocol in the ImgTec
+ infrared decoder block.
+
+config IR_IMG_SANYO
+ bool "Sanyo protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the Sanyo protocol (used by Sanyo,
+ Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
+
+config IR_IMG_RC5
+ bool "Philips RC5 protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the RC5 protocol in the ImgTec
+ infrared decoder block.
+
+config IR_IMG_RC6
+ bool "Philips RC6 protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the RC6 protocol in the ImgTec
+ infrared decoder block.
+ Note: This version only supports mode 0.
diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile
new file mode 100644
index 0000000000..741fedc5dc
--- /dev/null
+++ b/drivers/media/rc/img-ir/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+img-ir-y := img-ir-core.o
+img-ir-$(CONFIG_IR_IMG_RAW) += img-ir-raw.o
+img-ir-$(CONFIG_IR_IMG_HW) += img-ir-hw.o
+img-ir-$(CONFIG_IR_IMG_NEC) += img-ir-nec.o
+img-ir-$(CONFIG_IR_IMG_JVC) += img-ir-jvc.o
+img-ir-$(CONFIG_IR_IMG_SONY) += img-ir-sony.o
+img-ir-$(CONFIG_IR_IMG_SHARP) += img-ir-sharp.o
+img-ir-$(CONFIG_IR_IMG_SANYO) += img-ir-sanyo.o
+img-ir-$(CONFIG_IR_IMG_RC5) += img-ir-rc5.o
+img-ir-$(CONFIG_IR_IMG_RC6) += img-ir-rc6.o
+img-ir-objs := $(img-ir-y)
+
+obj-$(CONFIG_IR_IMG) += img-ir.o
diff --git a/drivers/media/rc/img-ir/img-ir-core.c b/drivers/media/rc/img-ir/img-ir-core.c
new file mode 100644
index 0000000000..d87d8e14c5
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-core.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This contains core img-ir code for setting up the driver. The two interfaces
+ * (raw and hardware decode) are handled separately.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "img-ir.h"
+
+static irqreturn_t img_ir_isr(int irq, void *dev_id)
+{
+ struct img_ir_priv *priv = dev_id;
+ u32 irq_status;
+
+ spin_lock(&priv->lock);
+ /* we have to clear irqs before reading */
+ irq_status = img_ir_read(priv, IMG_IR_IRQ_STATUS);
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_status);
+
+ /* don't handle valid data irqs if we're only interested in matches */
+ irq_status &= img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+
+ /* hand off edge interrupts to raw decode handler */
+ if (irq_status & IMG_IR_IRQ_EDGE && img_ir_raw_enabled(&priv->raw))
+ img_ir_isr_raw(priv, irq_status);
+
+ /* hand off hardware match interrupts to hardware decode handler */
+ if (irq_status & (IMG_IR_IRQ_DATA_MATCH |
+ IMG_IR_IRQ_DATA_VALID |
+ IMG_IR_IRQ_DATA2_VALID) &&
+ img_ir_hw_enabled(&priv->hw))
+ img_ir_isr_hw(priv, irq_status);
+
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+static void img_ir_setup(struct img_ir_priv *priv)
+{
+ /* start off with interrupts disabled */
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, 0);
+
+ img_ir_setup_raw(priv);
+ img_ir_setup_hw(priv);
+
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+}
+
+static void img_ir_ident(struct img_ir_priv *priv)
+{
+ u32 core_rev = img_ir_read(priv, IMG_IR_CORE_REV);
+
+ dev_info(priv->dev,
+ "IMG IR Decoder (%d.%d.%d.%d) probed successfully\n",
+ (core_rev & IMG_IR_DESIGNER) >> IMG_IR_DESIGNER_SHIFT,
+ (core_rev & IMG_IR_MAJOR_REV) >> IMG_IR_MAJOR_REV_SHIFT,
+ (core_rev & IMG_IR_MINOR_REV) >> IMG_IR_MINOR_REV_SHIFT,
+ (core_rev & IMG_IR_MAINT_REV) >> IMG_IR_MAINT_REV_SHIFT);
+ dev_info(priv->dev, "Modes:%s%s\n",
+ img_ir_hw_enabled(&priv->hw) ? " hardware" : "",
+ img_ir_raw_enabled(&priv->raw) ? " raw" : "");
+}
+
+static int img_ir_probe(struct platform_device *pdev)
+{
+ struct img_ir_priv *priv;
+ int irq, error, error2;
+
+ /* Get resources from platform device */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ /* Private driver data */
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ priv->dev = &pdev->dev;
+ spin_lock_init(&priv->lock);
+
+ /* Ioremap the registers */
+ priv->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->reg_base))
+ return PTR_ERR(priv->reg_base);
+
+ /* Get core clock */
+ priv->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(priv->clk))
+ dev_warn(&pdev->dev, "cannot get core clock resource\n");
+
+ /* Get sys clock */
+ priv->sys_clk = devm_clk_get(&pdev->dev, "sys");
+ if (IS_ERR(priv->sys_clk))
+ dev_warn(&pdev->dev, "cannot get sys clock resource\n");
+ /*
+ * Enabling the system clock before the register interface is
+ * accessed. ISR shouldn't get called with Sys Clock disabled,
+ * hence exiting probe with an error.
+ */
+ if (!IS_ERR(priv->sys_clk)) {
+ error = clk_prepare_enable(priv->sys_clk);
+ if (error) {
+ dev_err(&pdev->dev, "cannot enable sys clock\n");
+ return error;
+ }
+ }
+
+ /* Set up raw & hw decoder */
+ error = img_ir_probe_raw(priv);
+ error2 = img_ir_probe_hw(priv);
+ if (error && error2) {
+ if (error == -ENODEV)
+ error = error2;
+ goto err_probe;
+ }
+
+ /* Get the IRQ */
+ priv->irq = irq;
+ error = request_irq(priv->irq, img_ir_isr, 0, "img-ir", priv);
+ if (error) {
+ dev_err(&pdev->dev, "cannot register IRQ %u\n",
+ priv->irq);
+ error = -EIO;
+ goto err_irq;
+ }
+
+ img_ir_ident(priv);
+ img_ir_setup(priv);
+
+ return 0;
+
+err_irq:
+ img_ir_remove_hw(priv);
+ img_ir_remove_raw(priv);
+err_probe:
+ if (!IS_ERR(priv->sys_clk))
+ clk_disable_unprepare(priv->sys_clk);
+ return error;
+}
+
+static void img_ir_remove(struct platform_device *pdev)
+{
+ struct img_ir_priv *priv = platform_get_drvdata(pdev);
+
+ free_irq(priv->irq, priv);
+ img_ir_remove_hw(priv);
+ img_ir_remove_raw(priv);
+
+ if (!IS_ERR(priv->clk))
+ clk_disable_unprepare(priv->clk);
+ if (!IS_ERR(priv->sys_clk))
+ clk_disable_unprepare(priv->sys_clk);
+}
+
+static SIMPLE_DEV_PM_OPS(img_ir_pmops, img_ir_suspend, img_ir_resume);
+
+static const struct of_device_id img_ir_match[] = {
+ { .compatible = "img,ir-rev1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, img_ir_match);
+
+static struct platform_driver img_ir_driver = {
+ .driver = {
+ .name = "img-ir",
+ .of_match_table = img_ir_match,
+ .pm = &img_ir_pmops,
+ },
+ .probe = img_ir_probe,
+ .remove_new = img_ir_remove,
+};
+
+module_platform_driver(img_ir_driver);
+
+MODULE_AUTHOR("Imagination Technologies Ltd.");
+MODULE_DESCRIPTION("ImgTec IR");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
new file mode 100644
index 0000000000..5da7479c17
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -0,0 +1,1147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Hardware Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This ties into the input subsystem using the RC-core. Protocol support is
+ * provided in separate modules which provide the parameters and scancode
+ * translation functions to set up the hardware decoder and interpret the
+ * resulting input.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <media/rc-core.h>
+#include "img-ir.h"
+
+/* Decoders lock (only modified to preprocess them) */
+static DEFINE_SPINLOCK(img_ir_decoders_lock);
+
+static bool img_ir_decoders_preprocessed;
+static struct img_ir_decoder *img_ir_decoders[] = {
+#ifdef CONFIG_IR_IMG_NEC
+ &img_ir_nec,
+#endif
+#ifdef CONFIG_IR_IMG_JVC
+ &img_ir_jvc,
+#endif
+#ifdef CONFIG_IR_IMG_SONY
+ &img_ir_sony,
+#endif
+#ifdef CONFIG_IR_IMG_SHARP
+ &img_ir_sharp,
+#endif
+#ifdef CONFIG_IR_IMG_SANYO
+ &img_ir_sanyo,
+#endif
+#ifdef CONFIG_IR_IMG_RC5
+ &img_ir_rc5,
+#endif
+#ifdef CONFIG_IR_IMG_RC6
+ &img_ir_rc6,
+#endif
+ NULL
+};
+
+#define IMG_IR_F_FILTER BIT(RC_FILTER_NORMAL) /* enable filtering */
+#define IMG_IR_F_WAKE BIT(RC_FILTER_WAKEUP) /* enable waking */
+
+/* code type quirks */
+
+#define IMG_IR_QUIRK_CODE_BROKEN 0x1 /* Decode is broken */
+#define IMG_IR_QUIRK_CODE_LEN_INCR 0x2 /* Bit length needs increment */
+/*
+ * The decoder generates rapid interrupts without actually having
+ * received any new data after an incomplete IR code is decoded.
+ */
+#define IMG_IR_QUIRK_CODE_IRQ 0x4
+
+/* functions for preprocessing timings, ensuring max is set */
+
+static void img_ir_timing_preprocess(struct img_ir_timing_range *range,
+ unsigned int unit)
+{
+ if (range->max < range->min)
+ range->max = range->min;
+ if (unit) {
+ /* multiply by unit and convert to microseconds */
+ range->min = (range->min*unit)/1000;
+ range->max = (range->max*unit + 999)/1000; /* round up */
+ }
+}
+
+static void img_ir_symbol_timing_preprocess(struct img_ir_symbol_timing *timing,
+ unsigned int unit)
+{
+ img_ir_timing_preprocess(&timing->pulse, unit);
+ img_ir_timing_preprocess(&timing->space, unit);
+}
+
+static void img_ir_timings_preprocess(struct img_ir_timings *timings,
+ unsigned int unit)
+{
+ img_ir_symbol_timing_preprocess(&timings->ldr, unit);
+ img_ir_symbol_timing_preprocess(&timings->s00, unit);
+ img_ir_symbol_timing_preprocess(&timings->s01, unit);
+ img_ir_symbol_timing_preprocess(&timings->s10, unit);
+ img_ir_symbol_timing_preprocess(&timings->s11, unit);
+ /* default s10 and s11 to s00 and s01 if no leader */
+ if (unit)
+ /* multiply by unit and convert to microseconds (round up) */
+ timings->ft.ft_min = (timings->ft.ft_min*unit + 999)/1000;
+}
+
+/* functions for filling empty fields with defaults */
+
+static void img_ir_timing_defaults(struct img_ir_timing_range *range,
+ struct img_ir_timing_range *defaults)
+{
+ if (!range->min)
+ range->min = defaults->min;
+ if (!range->max)
+ range->max = defaults->max;
+}
+
+static void img_ir_symbol_timing_defaults(struct img_ir_symbol_timing *timing,
+ struct img_ir_symbol_timing *defaults)
+{
+ img_ir_timing_defaults(&timing->pulse, &defaults->pulse);
+ img_ir_timing_defaults(&timing->space, &defaults->space);
+}
+
+static void img_ir_timings_defaults(struct img_ir_timings *timings,
+ struct img_ir_timings *defaults)
+{
+ img_ir_symbol_timing_defaults(&timings->ldr, &defaults->ldr);
+ img_ir_symbol_timing_defaults(&timings->s00, &defaults->s00);
+ img_ir_symbol_timing_defaults(&timings->s01, &defaults->s01);
+ img_ir_symbol_timing_defaults(&timings->s10, &defaults->s10);
+ img_ir_symbol_timing_defaults(&timings->s11, &defaults->s11);
+ if (!timings->ft.ft_min)
+ timings->ft.ft_min = defaults->ft.ft_min;
+}
+
+/* functions for converting timings to register values */
+
+/**
+ * img_ir_control() - Convert control struct to control register value.
+ * @control: Control data
+ *
+ * Returns: The control register value equivalent of @control.
+ */
+static u32 img_ir_control(const struct img_ir_control *control)
+{
+ u32 ctrl = control->code_type << IMG_IR_CODETYPE_SHIFT;
+ if (control->decoden)
+ ctrl |= IMG_IR_DECODEN;
+ if (control->hdrtog)
+ ctrl |= IMG_IR_HDRTOG;
+ if (control->ldrdec)
+ ctrl |= IMG_IR_LDRDEC;
+ if (control->decodinpol)
+ ctrl |= IMG_IR_DECODINPOL;
+ if (control->bitorien)
+ ctrl |= IMG_IR_BITORIEN;
+ if (control->d1validsel)
+ ctrl |= IMG_IR_D1VALIDSEL;
+ if (control->bitinv)
+ ctrl |= IMG_IR_BITINV;
+ if (control->decodend2)
+ ctrl |= IMG_IR_DECODEND2;
+ if (control->bitoriend2)
+ ctrl |= IMG_IR_BITORIEND2;
+ if (control->bitinvd2)
+ ctrl |= IMG_IR_BITINVD2;
+ return ctrl;
+}
+
+/**
+ * img_ir_timing_range_convert() - Convert microsecond range.
+ * @out: Output timing range in clock cycles with a shift.
+ * @in: Input timing range in microseconds.
+ * @tolerance: Tolerance as a fraction of 128 (roughly percent).
+ * @clock_hz: IR clock rate in Hz.
+ * @shift: Shift of output units.
+ *
+ * Converts min and max from microseconds to IR clock cycles, applies a
+ * tolerance, and shifts for the register, rounding in the right direction.
+ * Note that in and out can safely be the same object.
+ */
+static void img_ir_timing_range_convert(struct img_ir_timing_range *out,
+ const struct img_ir_timing_range *in,
+ unsigned int tolerance,
+ unsigned long clock_hz,
+ unsigned int shift)
+{
+ unsigned int min = in->min;
+ unsigned int max = in->max;
+ /* add a tolerance */
+ min = min - (min*tolerance >> 7);
+ max = max + (max*tolerance >> 7);
+ /* convert from microseconds into clock cycles */
+ min = min*clock_hz / 1000000;
+ max = (max*clock_hz + 999999) / 1000000; /* round up */
+ /* apply shift and copy to output */
+ out->min = min >> shift;
+ out->max = (max + ((1 << shift) - 1)) >> shift; /* round up */
+}
+
+/**
+ * img_ir_symbol_timing() - Convert symbol timing struct to register value.
+ * @timing: Symbol timing data
+ * @tolerance: Timing tolerance where 0-128 represents 0-100%
+ * @clock_hz: Frequency of source clock in Hz
+ * @pd_shift: Shift to apply to symbol period
+ * @w_shift: Shift to apply to symbol width
+ *
+ * Returns: Symbol timing register value based on arguments.
+ */
+static u32 img_ir_symbol_timing(const struct img_ir_symbol_timing *timing,
+ unsigned int tolerance,
+ unsigned long clock_hz,
+ unsigned int pd_shift,
+ unsigned int w_shift)
+{
+ struct img_ir_timing_range hw_pulse, hw_period;
+ /* we calculate period in hw_period, then convert in place */
+ hw_period.min = timing->pulse.min + timing->space.min;
+ hw_period.max = timing->pulse.max + timing->space.max;
+ img_ir_timing_range_convert(&hw_period, &hw_period,
+ tolerance, clock_hz, pd_shift);
+ img_ir_timing_range_convert(&hw_pulse, &timing->pulse,
+ tolerance, clock_hz, w_shift);
+ /* construct register value */
+ return (hw_period.max << IMG_IR_PD_MAX_SHIFT) |
+ (hw_period.min << IMG_IR_PD_MIN_SHIFT) |
+ (hw_pulse.max << IMG_IR_W_MAX_SHIFT) |
+ (hw_pulse.min << IMG_IR_W_MIN_SHIFT);
+}
+
+/**
+ * img_ir_free_timing() - Convert free time timing struct to register value.
+ * @timing: Free symbol timing data
+ * @clock_hz: Source clock frequency in Hz
+ *
+ * Returns: Free symbol timing register value.
+ */
+static u32 img_ir_free_timing(const struct img_ir_free_timing *timing,
+ unsigned long clock_hz)
+{
+ unsigned int minlen, maxlen, ft_min;
+ /* minlen is only 5 bits, and round minlen to multiple of 2 */
+ if (timing->minlen < 30)
+ minlen = timing->minlen & -2;
+ else
+ minlen = 30;
+ /* maxlen has maximum value of 48, and round maxlen to multiple of 2 */
+ if (timing->maxlen < 48)
+ maxlen = (timing->maxlen + 1) & -2;
+ else
+ maxlen = 48;
+ /* convert and shift ft_min, rounding upwards */
+ ft_min = (timing->ft_min*clock_hz + 999999) / 1000000;
+ ft_min = (ft_min + 7) >> 3;
+ /* construct register value */
+ return (maxlen << IMG_IR_MAXLEN_SHIFT) |
+ (minlen << IMG_IR_MINLEN_SHIFT) |
+ (ft_min << IMG_IR_FT_MIN_SHIFT);
+}
+
+/**
+ * img_ir_free_timing_dynamic() - Update free time register value.
+ * @st_ft: Static free time register value from img_ir_free_timing.
+ * @filter: Current filter which may additionally restrict min/max len.
+ *
+ * Returns: Updated free time register value based on the current filter.
+ */
+static u32 img_ir_free_timing_dynamic(u32 st_ft, struct img_ir_filter *filter)
+{
+ unsigned int minlen, maxlen, newminlen, newmaxlen;
+
+ /* round minlen, maxlen to multiple of 2 */
+ newminlen = filter->minlen & -2;
+ newmaxlen = (filter->maxlen + 1) & -2;
+ /* extract min/max len from register */
+ minlen = (st_ft & IMG_IR_MINLEN) >> IMG_IR_MINLEN_SHIFT;
+ maxlen = (st_ft & IMG_IR_MAXLEN) >> IMG_IR_MAXLEN_SHIFT;
+ /* if the new values are more restrictive, update the register value */
+ if (newminlen > minlen) {
+ st_ft &= ~IMG_IR_MINLEN;
+ st_ft |= newminlen << IMG_IR_MINLEN_SHIFT;
+ }
+ if (newmaxlen < maxlen) {
+ st_ft &= ~IMG_IR_MAXLEN;
+ st_ft |= newmaxlen << IMG_IR_MAXLEN_SHIFT;
+ }
+ return st_ft;
+}
+
+/**
+ * img_ir_timings_convert() - Convert timings to register values
+ * @regs: Output timing register values
+ * @timings: Input timing data
+ * @tolerance: Timing tolerance where 0-128 represents 0-100%
+ * @clock_hz: Source clock frequency in Hz
+ */
+static void img_ir_timings_convert(struct img_ir_timing_regvals *regs,
+ const struct img_ir_timings *timings,
+ unsigned int tolerance,
+ unsigned int clock_hz)
+{
+ /* leader symbol timings are divided by 16 */
+ regs->ldr = img_ir_symbol_timing(&timings->ldr, tolerance, clock_hz,
+ 4, 4);
+ /* other symbol timings, pd fields only are divided by 2 */
+ regs->s00 = img_ir_symbol_timing(&timings->s00, tolerance, clock_hz,
+ 1, 0);
+ regs->s01 = img_ir_symbol_timing(&timings->s01, tolerance, clock_hz,
+ 1, 0);
+ regs->s10 = img_ir_symbol_timing(&timings->s10, tolerance, clock_hz,
+ 1, 0);
+ regs->s11 = img_ir_symbol_timing(&timings->s11, tolerance, clock_hz,
+ 1, 0);
+ regs->ft = img_ir_free_timing(&timings->ft, clock_hz);
+}
+
+/**
+ * img_ir_decoder_preprocess() - Preprocess timings in decoder.
+ * @decoder: Decoder to be preprocessed.
+ *
+ * Ensures that the symbol timing ranges are valid with respect to ordering, and
+ * does some fixed conversion on them.
+ */
+static void img_ir_decoder_preprocess(struct img_ir_decoder *decoder)
+{
+ /* default tolerance */
+ if (!decoder->tolerance)
+ decoder->tolerance = 10; /* percent */
+ /* and convert tolerance to fraction out of 128 */
+ decoder->tolerance = decoder->tolerance * 128 / 100;
+
+ /* fill in implicit fields */
+ img_ir_timings_preprocess(&decoder->timings, decoder->unit);
+
+ /* do the same for repeat timings if applicable */
+ if (decoder->repeat) {
+ img_ir_timings_preprocess(&decoder->rtimings, decoder->unit);
+ img_ir_timings_defaults(&decoder->rtimings, &decoder->timings);
+ }
+}
+
+/**
+ * img_ir_decoder_convert() - Generate internal timings in decoder.
+ * @decoder: Decoder to be converted to internal timings.
+ * @reg_timings: Timing register values.
+ * @clock_hz: IR clock rate in Hz.
+ *
+ * Fills out the repeat timings and timing register values for a specific clock
+ * rate.
+ */
+static void img_ir_decoder_convert(const struct img_ir_decoder *decoder,
+ struct img_ir_reg_timings *reg_timings,
+ unsigned int clock_hz)
+{
+ /* calculate control value */
+ reg_timings->ctrl = img_ir_control(&decoder->control);
+
+ /* fill in implicit fields and calculate register values */
+ img_ir_timings_convert(&reg_timings->timings, &decoder->timings,
+ decoder->tolerance, clock_hz);
+
+ /* do the same for repeat timings if applicable */
+ if (decoder->repeat)
+ img_ir_timings_convert(&reg_timings->rtimings,
+ &decoder->rtimings, decoder->tolerance,
+ clock_hz);
+}
+
+/**
+ * img_ir_write_timings() - Write timings to the hardware now
+ * @priv: IR private data
+ * @regs: Timing register values to write
+ * @type: RC filter type (RC_FILTER_*)
+ *
+ * Write timing register values @regs to the hardware, taking into account the
+ * current filter which may impose restrictions on the length of the expected
+ * data.
+ */
+static void img_ir_write_timings(struct img_ir_priv *priv,
+ struct img_ir_timing_regvals *regs,
+ enum rc_filter_type type)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+
+ /* filter may be more restrictive to minlen, maxlen */
+ u32 ft = regs->ft;
+ if (hw->flags & BIT(type))
+ ft = img_ir_free_timing_dynamic(regs->ft, &hw->filters[type]);
+ /* write to registers */
+ img_ir_write(priv, IMG_IR_LEAD_SYMB_TIMING, regs->ldr);
+ img_ir_write(priv, IMG_IR_S00_SYMB_TIMING, regs->s00);
+ img_ir_write(priv, IMG_IR_S01_SYMB_TIMING, regs->s01);
+ img_ir_write(priv, IMG_IR_S10_SYMB_TIMING, regs->s10);
+ img_ir_write(priv, IMG_IR_S11_SYMB_TIMING, regs->s11);
+ img_ir_write(priv, IMG_IR_FREE_SYMB_TIMING, ft);
+ dev_dbg(priv->dev, "timings: ldr=%#x, s=[%#x, %#x, %#x, %#x], ft=%#x\n",
+ regs->ldr, regs->s00, regs->s01, regs->s10, regs->s11, ft);
+}
+
+static void img_ir_write_filter(struct img_ir_priv *priv,
+ struct img_ir_filter *filter)
+{
+ if (filter) {
+ dev_dbg(priv->dev, "IR filter=%016llx & %016llx\n",
+ (unsigned long long)filter->data,
+ (unsigned long long)filter->mask);
+ img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_LW, (u32)filter->data);
+ img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_UP, (u32)(filter->data
+ >> 32));
+ img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, (u32)filter->mask);
+ img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, (u32)(filter->mask
+ >> 32));
+ } else {
+ dev_dbg(priv->dev, "IR clearing filter\n");
+ img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, 0);
+ img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, 0);
+ }
+}
+
+/* caller must have lock */
+static void _img_ir_set_filter(struct img_ir_priv *priv,
+ struct img_ir_filter *filter)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ u32 irq_en, irq_on;
+
+ irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ if (filter) {
+ /* Only use the match interrupt */
+ hw->filters[RC_FILTER_NORMAL] = *filter;
+ hw->flags |= IMG_IR_F_FILTER;
+ irq_on = IMG_IR_IRQ_DATA_MATCH;
+ irq_en &= ~(IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID);
+ } else {
+ /* Only use the valid interrupt */
+ hw->flags &= ~IMG_IR_F_FILTER;
+ irq_en &= ~IMG_IR_IRQ_DATA_MATCH;
+ irq_on = IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID;
+ }
+ irq_en |= irq_on;
+
+ img_ir_write_filter(priv, filter);
+ /* clear any interrupts we're enabling so we don't handle old ones */
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_on);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+}
+
+/* caller must have lock */
+static void _img_ir_set_wake_filter(struct img_ir_priv *priv,
+ struct img_ir_filter *filter)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ if (filter) {
+ /* Enable wake, and copy filter for later */
+ hw->filters[RC_FILTER_WAKEUP] = *filter;
+ hw->flags |= IMG_IR_F_WAKE;
+ } else {
+ /* Disable wake */
+ hw->flags &= ~IMG_IR_F_WAKE;
+ }
+}
+
+/* Callback for setting scancode filter */
+static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type,
+ struct rc_scancode_filter *sc_filter)
+{
+ struct img_ir_priv *priv = dev->priv;
+ struct img_ir_priv_hw *hw = &priv->hw;
+ struct img_ir_filter filter, *filter_ptr = &filter;
+ int ret = 0;
+
+ dev_dbg(priv->dev, "IR scancode %sfilter=%08x & %08x\n",
+ type == RC_FILTER_WAKEUP ? "wake " : "",
+ sc_filter->data,
+ sc_filter->mask);
+
+ spin_lock_irq(&priv->lock);
+
+ /* filtering can always be disabled */
+ if (!sc_filter->mask) {
+ filter_ptr = NULL;
+ goto set_unlock;
+ }
+
+ /* current decoder must support scancode filtering */
+ if (!hw->decoder || !hw->decoder->filter) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ /* convert scancode filter to raw filter */
+ filter.minlen = 0;
+ filter.maxlen = ~0;
+ if (type == RC_FILTER_NORMAL) {
+ /* guess scancode from protocol */
+ ret = hw->decoder->filter(sc_filter, &filter,
+ dev->enabled_protocols);
+ } else {
+ /* for wakeup user provided exact protocol variant */
+ ret = hw->decoder->filter(sc_filter, &filter,
+ 1ULL << dev->wakeup_protocol);
+ }
+ if (ret)
+ goto unlock;
+ dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n",
+ type == RC_FILTER_WAKEUP ? "wake " : "",
+ (unsigned long long)filter.data,
+ (unsigned long long)filter.mask);
+
+set_unlock:
+ /* apply raw filters */
+ switch (type) {
+ case RC_FILTER_NORMAL:
+ _img_ir_set_filter(priv, filter_ptr);
+ break;
+ case RC_FILTER_WAKEUP:
+ _img_ir_set_wake_filter(priv, filter_ptr);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+unlock:
+ spin_unlock_irq(&priv->lock);
+ return ret;
+}
+
+static int img_ir_set_normal_filter(struct rc_dev *dev,
+ struct rc_scancode_filter *sc_filter)
+{
+ return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter);
+}
+
+static int img_ir_set_wakeup_filter(struct rc_dev *dev,
+ struct rc_scancode_filter *sc_filter)
+{
+ return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter);
+}
+
+/**
+ * img_ir_set_decoder() - Set the current decoder.
+ * @priv: IR private data.
+ * @decoder: Decoder to use with immediate effect.
+ * @proto: Protocol bitmap (or 0 to use decoder->type).
+ */
+static void img_ir_set_decoder(struct img_ir_priv *priv,
+ const struct img_ir_decoder *decoder,
+ u64 proto)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ struct rc_dev *rdev = hw->rdev;
+ u32 ir_status, irq_en;
+ spin_lock_irq(&priv->lock);
+
+ /*
+ * First record that the protocol is being stopped so that the end timer
+ * isn't restarted while we're trying to stop it.
+ */
+ hw->stopping = true;
+
+ /*
+ * Release the lock to stop the end timer, since the end timer handler
+ * acquires the lock and we don't want to deadlock waiting for it.
+ */
+ spin_unlock_irq(&priv->lock);
+ del_timer_sync(&hw->end_timer);
+ del_timer_sync(&hw->suspend_timer);
+ spin_lock_irq(&priv->lock);
+
+ hw->stopping = false;
+
+ /* switch off and disable interrupts */
+ img_ir_write(priv, IMG_IR_CONTROL, 0);
+ irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en & IMG_IR_IRQ_EDGE);
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE);
+
+ /* ack any data already detected */
+ ir_status = img_ir_read(priv, IMG_IR_STATUS);
+ if (ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)) {
+ ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
+ img_ir_write(priv, IMG_IR_STATUS, ir_status);
+ }
+
+ /* always read data to clear buffer if IR wakes the device */
+ img_ir_read(priv, IMG_IR_DATA_LW);
+ img_ir_read(priv, IMG_IR_DATA_UP);
+
+ /* switch back to normal mode */
+ hw->mode = IMG_IR_M_NORMAL;
+
+ /* clear the wakeup scancode filter */
+ rdev->scancode_wakeup_filter.data = 0;
+ rdev->scancode_wakeup_filter.mask = 0;
+ rdev->wakeup_protocol = RC_PROTO_UNKNOWN;
+
+ /* clear raw filters */
+ _img_ir_set_filter(priv, NULL);
+ _img_ir_set_wake_filter(priv, NULL);
+
+ /* clear the enabled protocols */
+ hw->enabled_protocols = 0;
+
+ /* switch decoder */
+ hw->decoder = decoder;
+ if (!decoder)
+ goto unlock;
+
+ /* set the enabled protocols */
+ if (!proto)
+ proto = decoder->type;
+ hw->enabled_protocols = proto;
+
+ /* write the new timings */
+ img_ir_decoder_convert(decoder, &hw->reg_timings, hw->clk_hz);
+ img_ir_write_timings(priv, &hw->reg_timings.timings, RC_FILTER_NORMAL);
+
+ /* set up and enable */
+ img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+
+
+unlock:
+ spin_unlock_irq(&priv->lock);
+}
+
+/**
+ * img_ir_decoder_compatible() - Find whether a decoder will work with a device.
+ * @priv: IR private data.
+ * @dec: Decoder to check.
+ *
+ * Returns: true if @dec is compatible with the device @priv refers to.
+ */
+static bool img_ir_decoder_compatible(struct img_ir_priv *priv,
+ const struct img_ir_decoder *dec)
+{
+ unsigned int ct;
+
+ /* don't accept decoders using code types which aren't supported */
+ ct = dec->control.code_type;
+ if (priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_BROKEN)
+ return false;
+
+ return true;
+}
+
+/**
+ * img_ir_allowed_protos() - Get allowed protocols from global decoder list.
+ * @priv: IR private data.
+ *
+ * Returns: Mask of protocols supported by the device @priv refers to.
+ */
+static u64 img_ir_allowed_protos(struct img_ir_priv *priv)
+{
+ u64 protos = 0;
+ struct img_ir_decoder **decp;
+
+ for (decp = img_ir_decoders; *decp; ++decp) {
+ const struct img_ir_decoder *dec = *decp;
+ if (img_ir_decoder_compatible(priv, dec))
+ protos |= dec->type;
+ }
+ return protos;
+}
+
+/* Callback for changing protocol using sysfs */
+static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type)
+{
+ struct img_ir_priv *priv = dev->priv;
+ struct img_ir_priv_hw *hw = &priv->hw;
+ struct rc_dev *rdev = hw->rdev;
+ struct img_ir_decoder **decp;
+ u64 wakeup_protocols;
+
+ if (!*ir_type) {
+ /* disable all protocols */
+ img_ir_set_decoder(priv, NULL, 0);
+ goto success;
+ }
+ for (decp = img_ir_decoders; *decp; ++decp) {
+ const struct img_ir_decoder *dec = *decp;
+ if (!img_ir_decoder_compatible(priv, dec))
+ continue;
+ if (*ir_type & dec->type) {
+ *ir_type &= dec->type;
+ img_ir_set_decoder(priv, dec, *ir_type);
+ goto success;
+ }
+ }
+ return -EINVAL;
+
+success:
+ /*
+ * Only allow matching wakeup protocols for now, and only if filtering
+ * is supported.
+ */
+ wakeup_protocols = *ir_type;
+ if (!hw->decoder || !hw->decoder->filter)
+ wakeup_protocols = 0;
+ rdev->allowed_wakeup_protocols = wakeup_protocols;
+ return 0;
+}
+
+/* Changes ir-core protocol device attribute */
+static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto)
+{
+ struct rc_dev *rdev = priv->hw.rdev;
+
+ mutex_lock(&rdev->lock);
+ rdev->enabled_protocols = proto;
+ rdev->allowed_wakeup_protocols = proto;
+ mutex_unlock(&rdev->lock);
+}
+
+/* Set up IR decoders */
+static void img_ir_init_decoders(void)
+{
+ struct img_ir_decoder **decp;
+
+ spin_lock(&img_ir_decoders_lock);
+ if (!img_ir_decoders_preprocessed) {
+ for (decp = img_ir_decoders; *decp; ++decp)
+ img_ir_decoder_preprocess(*decp);
+ img_ir_decoders_preprocessed = true;
+ }
+ spin_unlock(&img_ir_decoders_lock);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * img_ir_enable_wake() - Switch to wake mode.
+ * @priv: IR private data.
+ *
+ * Returns: non-zero if the IR can wake the system.
+ */
+static int img_ir_enable_wake(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ int ret = 0;
+
+ spin_lock_irq(&priv->lock);
+ if (hw->flags & IMG_IR_F_WAKE) {
+ /* interrupt only on a match */
+ hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_DATA_MATCH);
+ img_ir_write_filter(priv, &hw->filters[RC_FILTER_WAKEUP]);
+ img_ir_write_timings(priv, &hw->reg_timings.timings,
+ RC_FILTER_WAKEUP);
+ hw->mode = IMG_IR_M_WAKE;
+ ret = 1;
+ }
+ spin_unlock_irq(&priv->lock);
+ return ret;
+}
+
+/**
+ * img_ir_disable_wake() - Switch out of wake mode.
+ * @priv: IR private data
+ *
+ * Returns: 1 if the hardware should be allowed to wake from a sleep state.
+ * 0 otherwise.
+ */
+static int img_ir_disable_wake(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ int ret = 0;
+
+ spin_lock_irq(&priv->lock);
+ if (hw->flags & IMG_IR_F_WAKE) {
+ /* restore normal filtering */
+ if (hw->flags & IMG_IR_F_FILTER) {
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+ (hw->suspend_irqen & IMG_IR_IRQ_EDGE) |
+ IMG_IR_IRQ_DATA_MATCH);
+ img_ir_write_filter(priv,
+ &hw->filters[RC_FILTER_NORMAL]);
+ } else {
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+ (hw->suspend_irqen & IMG_IR_IRQ_EDGE) |
+ IMG_IR_IRQ_DATA_VALID |
+ IMG_IR_IRQ_DATA2_VALID);
+ img_ir_write_filter(priv, NULL);
+ }
+ img_ir_write_timings(priv, &hw->reg_timings.timings,
+ RC_FILTER_NORMAL);
+ hw->mode = IMG_IR_M_NORMAL;
+ ret = 1;
+ }
+ spin_unlock_irq(&priv->lock);
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/* lock must be held */
+static void img_ir_begin_repeat(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ if (hw->mode == IMG_IR_M_NORMAL) {
+ /* switch to repeat timings */
+ img_ir_write(priv, IMG_IR_CONTROL, 0);
+ hw->mode = IMG_IR_M_REPEATING;
+ img_ir_write_timings(priv, &hw->reg_timings.rtimings,
+ RC_FILTER_NORMAL);
+ img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+ }
+}
+
+/* lock must be held */
+static void img_ir_end_repeat(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ if (hw->mode == IMG_IR_M_REPEATING) {
+ /* switch to normal timings */
+ img_ir_write(priv, IMG_IR_CONTROL, 0);
+ hw->mode = IMG_IR_M_NORMAL;
+ img_ir_write_timings(priv, &hw->reg_timings.timings,
+ RC_FILTER_NORMAL);
+ img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl);
+ }
+}
+
+/* lock must be held */
+static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ const struct img_ir_decoder *dec = hw->decoder;
+ int ret = IMG_IR_SCANCODE;
+ struct img_ir_scancode_req request;
+
+ request.protocol = RC_PROTO_UNKNOWN;
+ request.toggle = 0;
+
+ if (dec->scancode)
+ ret = dec->scancode(len, raw, hw->enabled_protocols, &request);
+ else if (len >= 32)
+ request.scancode = (u32)raw;
+ else if (len < 32)
+ request.scancode = (u32)raw & ((1 << len)-1);
+ dev_dbg(priv->dev, "data (%u bits) = %#llx\n",
+ len, (unsigned long long)raw);
+ if (ret == IMG_IR_SCANCODE) {
+ dev_dbg(priv->dev, "decoded scan code %#x, toggle %u\n",
+ request.scancode, request.toggle);
+ rc_keydown(hw->rdev, request.protocol, request.scancode,
+ request.toggle);
+ img_ir_end_repeat(priv);
+ } else if (ret == IMG_IR_REPEATCODE) {
+ if (hw->mode == IMG_IR_M_REPEATING) {
+ dev_dbg(priv->dev, "decoded repeat code\n");
+ rc_repeat(hw->rdev);
+ } else {
+ dev_dbg(priv->dev, "decoded unexpected repeat code, ignoring\n");
+ }
+ } else {
+ dev_dbg(priv->dev, "decode failed (%d)\n", ret);
+ return;
+ }
+
+
+ /* we mustn't update the end timer while trying to stop it */
+ if (dec->repeat && !hw->stopping) {
+ unsigned long interval;
+
+ img_ir_begin_repeat(priv);
+
+ /* update timer, but allowing for 1/8th tolerance */
+ interval = dec->repeat + (dec->repeat >> 3);
+ mod_timer(&hw->end_timer,
+ jiffies + msecs_to_jiffies(interval));
+ }
+}
+
+/* timer function to end waiting for repeat. */
+static void img_ir_end_timer(struct timer_list *t)
+{
+ struct img_ir_priv *priv = from_timer(priv, t, hw.end_timer);
+
+ spin_lock_irq(&priv->lock);
+ img_ir_end_repeat(priv);
+ spin_unlock_irq(&priv->lock);
+}
+
+/*
+ * Timer function to re-enable the current protocol after it had been
+ * cleared when invalid interrupts were generated due to a quirk in the
+ * img-ir decoder.
+ */
+static void img_ir_suspend_timer(struct timer_list *t)
+{
+ struct img_ir_priv *priv = from_timer(priv, t, hw.suspend_timer);
+
+ spin_lock_irq(&priv->lock);
+ /*
+ * Don't overwrite enabled valid/match IRQs if they have already been
+ * changed by e.g. a filter change.
+ */
+ if ((priv->hw.quirk_suspend_irq & IMG_IR_IRQ_EDGE) ==
+ img_ir_read(priv, IMG_IR_IRQ_ENABLE))
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+ priv->hw.quirk_suspend_irq);
+ /* enable */
+ img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl);
+ spin_unlock_irq(&priv->lock);
+}
+
+#ifdef CONFIG_COMMON_CLK
+static void img_ir_change_frequency(struct img_ir_priv *priv,
+ struct clk_notifier_data *change)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+
+ dev_dbg(priv->dev, "clk changed %lu HZ -> %lu HZ\n",
+ change->old_rate, change->new_rate);
+
+ spin_lock_irq(&priv->lock);
+ if (hw->clk_hz == change->new_rate)
+ goto unlock;
+ hw->clk_hz = change->new_rate;
+ /* refresh current timings */
+ if (hw->decoder) {
+ img_ir_decoder_convert(hw->decoder, &hw->reg_timings,
+ hw->clk_hz);
+ switch (hw->mode) {
+ case IMG_IR_M_NORMAL:
+ img_ir_write_timings(priv, &hw->reg_timings.timings,
+ RC_FILTER_NORMAL);
+ break;
+ case IMG_IR_M_REPEATING:
+ img_ir_write_timings(priv, &hw->reg_timings.rtimings,
+ RC_FILTER_NORMAL);
+ break;
+#ifdef CONFIG_PM_SLEEP
+ case IMG_IR_M_WAKE:
+ img_ir_write_timings(priv, &hw->reg_timings.timings,
+ RC_FILTER_WAKEUP);
+ break;
+#endif
+ }
+ }
+unlock:
+ spin_unlock_irq(&priv->lock);
+}
+
+static int img_ir_clk_notify(struct notifier_block *self, unsigned long action,
+ void *data)
+{
+ struct img_ir_priv *priv = container_of(self, struct img_ir_priv,
+ hw.clk_nb);
+ switch (action) {
+ case POST_RATE_CHANGE:
+ img_ir_change_frequency(priv, data);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+#endif /* CONFIG_COMMON_CLK */
+
+/* called with priv->lock held */
+void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ u32 ir_status, len, lw, up;
+ unsigned int ct;
+
+ /* use the current decoder */
+ if (!hw->decoder)
+ return;
+
+ ct = hw->decoder->control.code_type;
+
+ ir_status = img_ir_read(priv, IMG_IR_STATUS);
+ if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) {
+ if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ) ||
+ hw->stopping)
+ return;
+ /*
+ * The below functionality is added as a work around to stop
+ * multiple Interrupts generated when an incomplete IR code is
+ * received by the decoder.
+ * The decoder generates rapid interrupts without actually
+ * having received any new data. After a single interrupt it's
+ * expected to clear up, but instead multiple interrupts are
+ * rapidly generated. only way to get out of this loop is to
+ * reset the control register after a short delay.
+ */
+ img_ir_write(priv, IMG_IR_CONTROL, 0);
+ hw->quirk_suspend_irq = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+ hw->quirk_suspend_irq & IMG_IR_IRQ_EDGE);
+
+ /* Timer activated to re-enable the protocol. */
+ mod_timer(&hw->suspend_timer,
+ jiffies + msecs_to_jiffies(5));
+ return;
+ }
+ ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
+ img_ir_write(priv, IMG_IR_STATUS, ir_status);
+
+ len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT;
+ /* some versions report wrong length for certain code types */
+ if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR)
+ ++len;
+
+ lw = img_ir_read(priv, IMG_IR_DATA_LW);
+ up = img_ir_read(priv, IMG_IR_DATA_UP);
+ img_ir_handle_data(priv, len, (u64)up << 32 | lw);
+}
+
+void img_ir_setup_hw(struct img_ir_priv *priv)
+{
+ struct img_ir_decoder **decp;
+
+ if (!priv->hw.rdev)
+ return;
+
+ /* Use the first available decoder (or disable stuff if NULL) */
+ for (decp = img_ir_decoders; *decp; ++decp) {
+ const struct img_ir_decoder *dec = *decp;
+ if (img_ir_decoder_compatible(priv, dec)) {
+ img_ir_set_protocol(priv, dec->type);
+ img_ir_set_decoder(priv, dec, 0);
+ return;
+ }
+ }
+ img_ir_set_decoder(priv, NULL, 0);
+}
+
+/**
+ * img_ir_probe_hw_caps() - Probe capabilities of the hardware.
+ * @priv: IR private data.
+ */
+static void img_ir_probe_hw_caps(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ /*
+ * When a version of the block becomes available without these quirks,
+ * they'll have to depend on the core revision.
+ */
+ hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN]
+ |= IMG_IR_QUIRK_CODE_LEN_INCR;
+ hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE]
+ |= IMG_IR_QUIRK_CODE_IRQ;
+ hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS]
+ |= IMG_IR_QUIRK_CODE_BROKEN;
+}
+
+int img_ir_probe_hw(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ struct rc_dev *rdev;
+ int error;
+
+ /* Ensure hardware decoders have been preprocessed */
+ img_ir_init_decoders();
+
+ /* Probe hardware capabilities */
+ img_ir_probe_hw_caps(priv);
+
+ /* Set up the end timer */
+ timer_setup(&hw->end_timer, img_ir_end_timer, 0);
+ timer_setup(&hw->suspend_timer, img_ir_suspend_timer, 0);
+
+ /* Register a clock notifier */
+ if (!IS_ERR(priv->clk)) {
+ hw->clk_hz = clk_get_rate(priv->clk);
+#ifdef CONFIG_COMMON_CLK
+ hw->clk_nb.notifier_call = img_ir_clk_notify;
+ error = clk_notifier_register(priv->clk, &hw->clk_nb);
+ if (error)
+ dev_warn(priv->dev,
+ "failed to register clock notifier\n");
+#endif
+ } else {
+ hw->clk_hz = 32768;
+ }
+
+ /* Allocate hardware decoder */
+ hw->rdev = rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
+ if (!rdev) {
+ dev_err(priv->dev, "cannot allocate input device\n");
+ error = -ENOMEM;
+ goto err_alloc_rc;
+ }
+ rdev->priv = priv;
+ rdev->map_name = RC_MAP_EMPTY;
+ rdev->allowed_protocols = img_ir_allowed_protos(priv);
+ rdev->device_name = "IMG Infrared Decoder";
+ rdev->s_filter = img_ir_set_normal_filter;
+ rdev->s_wakeup_filter = img_ir_set_wakeup_filter;
+
+ /* Register hardware decoder */
+ error = rc_register_device(rdev);
+ if (error) {
+ dev_err(priv->dev, "failed to register IR input device\n");
+ goto err_register_rc;
+ }
+
+ /*
+ * Set this after rc_register_device as no protocols have been
+ * registered yet.
+ */
+ rdev->change_protocol = img_ir_change_protocol;
+
+ device_init_wakeup(priv->dev, 1);
+
+ return 0;
+
+err_register_rc:
+ img_ir_set_decoder(priv, NULL, 0);
+ hw->rdev = NULL;
+ rc_free_device(rdev);
+err_alloc_rc:
+#ifdef CONFIG_COMMON_CLK
+ if (!IS_ERR(priv->clk))
+ clk_notifier_unregister(priv->clk, &hw->clk_nb);
+#endif
+ return error;
+}
+
+void img_ir_remove_hw(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_hw *hw = &priv->hw;
+ struct rc_dev *rdev = hw->rdev;
+ if (!rdev)
+ return;
+ img_ir_set_decoder(priv, NULL, 0);
+ hw->rdev = NULL;
+ rc_unregister_device(rdev);
+#ifdef CONFIG_COMMON_CLK
+ if (!IS_ERR(priv->clk))
+ clk_notifier_unregister(priv->clk, &hw->clk_nb);
+#endif
+}
+
+#ifdef CONFIG_PM_SLEEP
+int img_ir_suspend(struct device *dev)
+{
+ struct img_ir_priv *priv = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev) && img_ir_enable_wake(priv))
+ enable_irq_wake(priv->irq);
+ return 0;
+}
+
+int img_ir_resume(struct device *dev)
+{
+ struct img_ir_priv *priv = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev) && img_ir_disable_wake(priv))
+ disable_irq_wake(priv->irq);
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
new file mode 100644
index 0000000000..9522990383
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -0,0 +1,297 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Hardware Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_HW_H_
+#define _IMG_IR_HW_H_
+
+#include <linux/kernel.h>
+#include <media/rc-core.h>
+
+/* constants */
+
+#define IMG_IR_CODETYPE_PULSELEN 0x0 /* Sony */
+#define IMG_IR_CODETYPE_PULSEDIST 0x1 /* NEC, Toshiba, Micom, Sharp */
+#define IMG_IR_CODETYPE_BIPHASE 0x2 /* RC-5/6 */
+#define IMG_IR_CODETYPE_2BITPULSEPOS 0x3 /* RC-MM */
+
+
+/* Timing information */
+
+/**
+ * struct img_ir_control - Decoder control settings
+ * @decoden: Primary decoder enable
+ * @code_type: Decode type (see IMG_IR_CODETYPE_*)
+ * @hdrtog: Detect header toggle symbol after leader symbol
+ * @ldrdec: Don't discard leader if maximum width reached
+ * @decodinpol: Decoder input polarity (1=active high)
+ * @bitorien: Bit orientation (1=MSB first)
+ * @d1validsel: Decoder 2 takes over if it detects valid data
+ * @bitinv: Bit inversion switch (1=don't invert)
+ * @decodend2: Secondary decoder enable (no leader symbol)
+ * @bitoriend2: Bit orientation (1=MSB first)
+ * @bitinvd2: Secondary decoder bit inversion switch (1=don't invert)
+ */
+struct img_ir_control {
+ unsigned decoden:1;
+ unsigned code_type:2;
+ unsigned hdrtog:1;
+ unsigned ldrdec:1;
+ unsigned decodinpol:1;
+ unsigned bitorien:1;
+ unsigned d1validsel:1;
+ unsigned bitinv:1;
+ unsigned decodend2:1;
+ unsigned bitoriend2:1;
+ unsigned bitinvd2:1;
+};
+
+/**
+ * struct img_ir_timing_range - range of timing values
+ * @min: Minimum timing value
+ * @max: Maximum timing value (if < @min, this will be set to @min during
+ * preprocessing step, so it is normally not explicitly initialised
+ * and is taken care of by the tolerance)
+ */
+struct img_ir_timing_range {
+ u16 min;
+ u16 max;
+};
+
+/**
+ * struct img_ir_symbol_timing - timing data for a symbol
+ * @pulse: Timing range for the length of the pulse in this symbol
+ * @space: Timing range for the length of the space in this symbol
+ */
+struct img_ir_symbol_timing {
+ struct img_ir_timing_range pulse;
+ struct img_ir_timing_range space;
+};
+
+/**
+ * struct img_ir_free_timing - timing data for free time symbol
+ * @minlen: Minimum number of bits of data
+ * @maxlen: Maximum number of bits of data
+ * @ft_min: Minimum free time after message
+ */
+struct img_ir_free_timing {
+ /* measured in bits */
+ u8 minlen;
+ u8 maxlen;
+ u16 ft_min;
+};
+
+/**
+ * struct img_ir_timings - Timing values.
+ * @ldr: Leader symbol timing data
+ * @s00: Zero symbol timing data for primary decoder
+ * @s01: One symbol timing data for primary decoder
+ * @s10: Zero symbol timing data for secondary (no leader symbol) decoder
+ * @s11: One symbol timing data for secondary (no leader symbol) decoder
+ * @ft: Free time symbol timing data
+ */
+struct img_ir_timings {
+ struct img_ir_symbol_timing ldr, s00, s01, s10, s11;
+ struct img_ir_free_timing ft;
+};
+
+/**
+ * struct img_ir_filter - Filter IR events.
+ * @data: Data to match.
+ * @mask: Mask of bits to compare.
+ * @minlen: Additional minimum number of bits.
+ * @maxlen: Additional maximum number of bits.
+ */
+struct img_ir_filter {
+ u64 data;
+ u64 mask;
+ u8 minlen;
+ u8 maxlen;
+};
+
+/**
+ * struct img_ir_timing_regvals - Calculated timing register values.
+ * @ldr: Leader symbol timing register value
+ * @s00: Zero symbol timing register value for primary decoder
+ * @s01: One symbol timing register value for primary decoder
+ * @s10: Zero symbol timing register value for secondary decoder
+ * @s11: One symbol timing register value for secondary decoder
+ * @ft: Free time symbol timing register value
+ */
+struct img_ir_timing_regvals {
+ u32 ldr, s00, s01, s10, s11, ft;
+};
+
+#define IMG_IR_SCANCODE 0 /* new scancode */
+#define IMG_IR_REPEATCODE 1 /* repeat the previous code */
+
+/**
+ * struct img_ir_scancode_req - Scancode request data.
+ * @protocol: Protocol code of received message (defaults to
+ * RC_PROTO_UNKNOWN).
+ * @scancode: Scan code of received message (must be written by
+ * handler if IMG_IR_SCANCODE is returned).
+ * @toggle: Toggle bit (defaults to 0).
+ */
+struct img_ir_scancode_req {
+ enum rc_proto protocol;
+ u32 scancode;
+ u8 toggle;
+};
+
+/**
+ * struct img_ir_decoder - Decoder settings for an IR protocol.
+ * @type: Protocol types bitmap.
+ * @tolerance: Timing tolerance as a percentage (default 10%).
+ * @unit: Unit of timings in nanoseconds (default 1 us).
+ * @timings: Primary timings
+ * @rtimings: Additional override timings while waiting for repeats.
+ * @repeat: Maximum repeat interval (always in milliseconds).
+ * @control: Control flags.
+ *
+ * @scancode: Pointer to function to convert the IR data into a scancode (it
+ * must be safe to execute in interrupt context).
+ * Returns IMG_IR_SCANCODE to emit new scancode.
+ * Returns IMG_IR_REPEATCODE to repeat previous code.
+ * Returns -errno (e.g. -EINVAL) on error.
+ * @filter: Pointer to function to convert scancode filter to raw hardware
+ * filter. The minlen and maxlen fields will have been initialised
+ * to the maximum range.
+ */
+struct img_ir_decoder {
+ /* core description */
+ u64 type;
+ unsigned int tolerance;
+ unsigned int unit;
+ struct img_ir_timings timings;
+ struct img_ir_timings rtimings;
+ unsigned int repeat;
+ struct img_ir_control control;
+
+ /* scancode logic */
+ int (*scancode)(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request);
+ int (*filter)(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols);
+};
+
+extern struct img_ir_decoder img_ir_nec;
+extern struct img_ir_decoder img_ir_jvc;
+extern struct img_ir_decoder img_ir_sony;
+extern struct img_ir_decoder img_ir_sharp;
+extern struct img_ir_decoder img_ir_sanyo;
+extern struct img_ir_decoder img_ir_rc5;
+extern struct img_ir_decoder img_ir_rc6;
+
+/**
+ * struct img_ir_reg_timings - Reg values for decoder timings at clock rate.
+ * @ctrl: Processed control register value.
+ * @timings: Processed primary timings.
+ * @rtimings: Processed repeat timings.
+ */
+struct img_ir_reg_timings {
+ u32 ctrl;
+ struct img_ir_timing_regvals timings;
+ struct img_ir_timing_regvals rtimings;
+};
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_HW
+
+enum img_ir_mode {
+ IMG_IR_M_NORMAL,
+ IMG_IR_M_REPEATING,
+#ifdef CONFIG_PM_SLEEP
+ IMG_IR_M_WAKE,
+#endif
+};
+
+/**
+ * struct img_ir_priv_hw - Private driver data for hardware decoder.
+ * @ct_quirks: Quirk bits for each code type.
+ * @rdev: Remote control device
+ * @clk_nb: Notifier block for clock notify events.
+ * @end_timer: Timer until repeat timeout.
+ * @suspend_timer: Timer to re-enable protocol.
+ * @decoder: Current decoder settings.
+ * @enabled_protocols: Currently enabled protocols.
+ * @clk_hz: Current core clock rate in Hz.
+ * @reg_timings: Timing reg values for decoder at clock rate.
+ * @flags: IMG_IR_F_*.
+ * @filters: HW filters (derived from scancode filters).
+ * @mode: Current decode mode.
+ * @stopping: Indicates that decoder is being taken down and timers
+ * should not be restarted.
+ * @suspend_irqen: Saved IRQ enable mask over suspend.
+ * @quirk_suspend_irq: Saved IRQ enable mask over quirk suspend timer.
+ */
+struct img_ir_priv_hw {
+ unsigned int ct_quirks[4];
+ struct rc_dev *rdev;
+ struct notifier_block clk_nb;
+ struct timer_list end_timer;
+ struct timer_list suspend_timer;
+ const struct img_ir_decoder *decoder;
+ u64 enabled_protocols;
+ unsigned long clk_hz;
+ struct img_ir_reg_timings reg_timings;
+ unsigned int flags;
+ struct img_ir_filter filters[RC_FILTER_MAX];
+
+ enum img_ir_mode mode;
+ bool stopping;
+ u32 suspend_irqen;
+ u32 quirk_suspend_irq;
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+ return hw->rdev;
+};
+
+void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_hw(struct img_ir_priv *priv);
+int img_ir_probe_hw(struct img_ir_priv *priv);
+void img_ir_remove_hw(struct img_ir_priv *priv);
+
+#ifdef CONFIG_PM_SLEEP
+int img_ir_suspend(struct device *dev);
+int img_ir_resume(struct device *dev);
+#else
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+#endif
+
+#else
+
+struct img_ir_priv_hw {
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+ return false;
+};
+static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_hw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_hw(struct img_ir_priv *priv)
+{
+ return -ENODEV;
+}
+static inline void img_ir_remove_hw(struct img_ir_priv *priv)
+{
+}
+
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+
+#endif /* CONFIG_IR_IMG_HW */
+
+#endif /* _IMG_IR_HW_H_ */
diff --git a/drivers/media/rc/img-ir/img-ir-jvc.c b/drivers/media/rc/img-ir/img-ir-jvc.c
new file mode 100644
index 0000000000..0fc5e6e45d
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-jvc.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for JVC protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert JVC data to a scancode */
+static int img_ir_jvc_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int cust, data;
+
+ if (len != 16)
+ return -EINVAL;
+
+ cust = (raw >> 0) & 0xff;
+ data = (raw >> 8) & 0xff;
+
+ request->protocol = RC_PROTO_JVC;
+ request->scancode = cust << 8 | data;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert JVC scancode to JVC data filter */
+static int img_ir_jvc_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int cust, data;
+ unsigned int cust_m, data_m;
+
+ cust = (in->data >> 8) & 0xff;
+ cust_m = (in->mask >> 8) & 0xff;
+ data = (in->data >> 0) & 0xff;
+ data_m = (in->mask >> 0) & 0xff;
+
+ out->data = cust | data << 8;
+ out->mask = cust_m | data_m << 8;
+
+ return 0;
+}
+
+/*
+ * JVC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/jvc.php
+ * http://support.jvc.com/consumer/support/documents/RemoteCodes.pdf
+ */
+struct img_ir_decoder img_ir_jvc = {
+ .type = RC_PROTO_BIT_JVC,
+ .control = {
+ .decoden = 1,
+ .code_type = IMG_IR_CODETYPE_PULSEDIST,
+ },
+ /* main timings */
+ .unit = 527500, /* 527.5 us */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 16 /* 8.44 ms */ },
+ .space = { 8 /* 4.22 ms */ },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 1 /* 527.5 us +-60 us */ },
+ .space = { 1 /* 527.5 us */ },
+ },
+ /* 1 symbol */
+ .s01 = {
+ .pulse = { 1 /* 527.5 us +-60 us */ },
+ .space = { 3 /* 1.5825 ms +-40 us */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 16,
+ .maxlen = 16,
+ .ft_min = 10, /* 5.275 ms */
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_jvc_scancode,
+ .filter = img_ir_jvc_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-nec.c b/drivers/media/rc/img-ir/img-ir-nec.c
new file mode 100644
index 0000000000..c01e30bb63
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-nec.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for NEC protocol.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+#include <linux/bitrev.h>
+#include <linux/log2.h>
+
+/* Convert NEC data to a scancode */
+static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ /* a repeat code has no data */
+ if (!len)
+ return IMG_IR_REPEATCODE;
+ if (len != 32)
+ return -EINVAL;
+ /* raw encoding: ddDDaaAA */
+ addr = (raw >> 0) & 0xff;
+ addr_inv = (raw >> 8) & 0xff;
+ data = (raw >> 16) & 0xff;
+ data_inv = (raw >> 24) & 0xff;
+ if ((data_inv ^ data) != 0xff) {
+ /* 32-bit NEC (used by Apple and TiVo remotes) */
+ /* scan encoding: as transmitted, MSBit = first received bit */
+ request->scancode = bitrev8(addr) << 24 |
+ bitrev8(addr_inv) << 16 |
+ bitrev8(data) << 8 |
+ bitrev8(data_inv);
+ request->protocol = RC_PROTO_NEC32;
+ } else if ((addr_inv ^ addr) != 0xff) {
+ /* Extended NEC */
+ /* scan encoding: AAaaDD */
+ request->scancode = addr << 16 |
+ addr_inv << 8 |
+ data;
+ request->protocol = RC_PROTO_NECX;
+ } else {
+ /* Normal NEC */
+ /* scan encoding: AADD */
+ request->scancode = addr << 8 |
+ data;
+ request->protocol = RC_PROTO_NEC;
+ }
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert NEC scancode to NEC data filter */
+static int img_ir_nec_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ unsigned int addr_m, addr_inv_m, data_m, data_inv_m;
+
+ data = in->data & 0xff;
+ data_m = in->mask & 0xff;
+
+ protocols &= RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32;
+
+ /*
+ * If only one bit is set, we were requested to do an exact
+ * protocol. This should be the case for wakeup filters; for
+ * normal filters, guess the protocol from the scancode.
+ */
+ if (!is_power_of_2(protocols)) {
+ if ((in->data | in->mask) & 0xff000000)
+ protocols = RC_PROTO_BIT_NEC32;
+ else if ((in->data | in->mask) & 0x00ff0000)
+ protocols = RC_PROTO_BIT_NECX;
+ else
+ protocols = RC_PROTO_BIT_NEC;
+ }
+
+ if (protocols == RC_PROTO_BIT_NEC32) {
+ /* 32-bit NEC (used by Apple and TiVo remotes) */
+ /* scan encoding: as transmitted, MSBit = first received bit */
+ addr = bitrev8(in->data >> 24);
+ addr_m = bitrev8(in->mask >> 24);
+ addr_inv = bitrev8(in->data >> 16);
+ addr_inv_m = bitrev8(in->mask >> 16);
+ data = bitrev8(in->data >> 8);
+ data_m = bitrev8(in->mask >> 8);
+ data_inv = bitrev8(in->data >> 0);
+ data_inv_m = bitrev8(in->mask >> 0);
+ } else if (protocols == RC_PROTO_BIT_NECX) {
+ /* Extended NEC */
+ /* scan encoding AAaaDD */
+ addr = (in->data >> 16) & 0xff;
+ addr_m = (in->mask >> 16) & 0xff;
+ addr_inv = (in->data >> 8) & 0xff;
+ addr_inv_m = (in->mask >> 8) & 0xff;
+ data_inv = data ^ 0xff;
+ data_inv_m = data_m;
+ } else {
+ /* Normal NEC */
+ /* scan encoding: AADD */
+ addr = (in->data >> 8) & 0xff;
+ addr_m = (in->mask >> 8) & 0xff;
+ addr_inv = addr ^ 0xff;
+ addr_inv_m = addr_m;
+ data_inv = data ^ 0xff;
+ data_inv_m = data_m;
+ }
+
+ /* raw encoding: ddDDaaAA */
+ out->data = data_inv << 24 |
+ data << 16 |
+ addr_inv << 8 |
+ addr;
+ out->mask = data_inv_m << 24 |
+ data_m << 16 |
+ addr_inv_m << 8 |
+ addr_m;
+ return 0;
+}
+
+/*
+ * NEC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/nec.php
+ * http://wiki.altium.com/display/ADOH/NEC+Infrared+Transmission+Protocol
+ */
+struct img_ir_decoder img_ir_nec = {
+ .type = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32,
+ .control = {
+ .decoden = 1,
+ .code_type = IMG_IR_CODETYPE_PULSEDIST,
+ },
+ /* main timings */
+ .unit = 562500, /* 562.5 us */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 16 /* 9ms */ },
+ .space = { 8 /* 4.5ms */ },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 1 /* 562.5 us */ },
+ },
+ /* 1 symbol */
+ .s01 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 3 /* 1687.5 us */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 32,
+ .maxlen = 32,
+ .ft_min = 10, /* 5.625 ms */
+ },
+ },
+ /* repeat codes */
+ .repeat = 108, /* 108 ms */
+ .rtimings = {
+ /* leader symbol */
+ .ldr = {
+ .space = { 4 /* 2.25 ms */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 0, /* repeat code has no data */
+ .maxlen = 0,
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_nec_scancode,
+ .filter = img_ir_nec_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-raw.c b/drivers/media/rc/img-ir/img-ir-raw.c
new file mode 100644
index 0000000000..8b0bdd9603
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ *
+ * This ties into the input subsystem using the RC-core in raw mode. Raw IR
+ * signal edges are reported and decoded by generic software decoders.
+ */
+
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+#include "img-ir.h"
+
+#define ECHO_TIMEOUT_MS 150 /* ms between echos */
+
+/* must be called with priv->lock held */
+static void img_ir_refresh_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+ struct img_ir_priv_raw *raw = &priv->raw;
+ struct rc_dev *rc_dev = priv->raw.rdev;
+ int multiple;
+ u32 ir_status;
+
+ /* find whether both rise and fall was detected */
+ multiple = ((irq_status & IMG_IR_IRQ_EDGE) == IMG_IR_IRQ_EDGE);
+ /*
+ * If so, we need to see if the level has actually changed.
+ * If it's just noise that we didn't have time to process,
+ * there's no point reporting it.
+ */
+ ir_status = img_ir_read(priv, IMG_IR_STATUS) & IMG_IR_IRRXD;
+ if (multiple && ir_status == raw->last_status)
+ return;
+ raw->last_status = ir_status;
+
+ /* report the edge to the IR raw decoders */
+ if (ir_status) /* low */
+ ir_raw_event_store_edge(rc_dev, false);
+ else /* high */
+ ir_raw_event_store_edge(rc_dev, true);
+ ir_raw_event_handle(rc_dev);
+}
+
+/* called with priv->lock held */
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+ struct img_ir_priv_raw *raw = &priv->raw;
+
+ /* check not removing */
+ if (!raw->rdev)
+ return;
+
+ img_ir_refresh_raw(priv, irq_status);
+
+ /* start / push back the echo timer */
+ mod_timer(&raw->timer, jiffies + msecs_to_jiffies(ECHO_TIMEOUT_MS));
+}
+
+/*
+ * Echo timer callback function.
+ * The raw decoders expect to get a final sample even if there are no edges, in
+ * order to be assured of the final space. If there are no edges for a certain
+ * time we use this timer to emit a final sample to satisfy them.
+ */
+static void img_ir_echo_timer(struct timer_list *t)
+{
+ struct img_ir_priv *priv = from_timer(priv, t, raw.timer);
+
+ spin_lock_irq(&priv->lock);
+
+ /* check not removing */
+ if (priv->raw.rdev)
+ /*
+ * It's safe to pass irq_status=0 since it's only used to check
+ * for double edges.
+ */
+ img_ir_refresh_raw(priv, 0);
+
+ spin_unlock_irq(&priv->lock);
+}
+
+void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+ u32 irq_en;
+
+ if (!priv->raw.rdev)
+ return;
+
+ /* clear and enable edge interrupts */
+ spin_lock_irq(&priv->lock);
+ irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ irq_en |= IMG_IR_IRQ_EDGE;
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+ spin_unlock_irq(&priv->lock);
+}
+
+int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_raw *raw = &priv->raw;
+ struct rc_dev *rdev;
+ int error;
+
+ /* Set up the echo timer */
+ timer_setup(&raw->timer, img_ir_echo_timer, 0);
+
+ /* Allocate raw decoder */
+ raw->rdev = rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
+ if (!rdev) {
+ dev_err(priv->dev, "cannot allocate raw input device\n");
+ return -ENOMEM;
+ }
+ rdev->priv = priv;
+ rdev->map_name = RC_MAP_EMPTY;
+ rdev->device_name = "IMG Infrared Decoder Raw";
+
+ /* Register raw decoder */
+ error = rc_register_device(rdev);
+ if (error) {
+ dev_err(priv->dev, "failed to register raw IR input device\n");
+ rc_free_device(rdev);
+ raw->rdev = NULL;
+ return error;
+ }
+
+ return 0;
+}
+
+void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+ struct img_ir_priv_raw *raw = &priv->raw;
+ struct rc_dev *rdev = raw->rdev;
+ u32 irq_en;
+
+ if (!rdev)
+ return;
+
+ /* switch off and disable raw (edge) interrupts */
+ spin_lock_irq(&priv->lock);
+ raw->rdev = NULL;
+ irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ irq_en &= ~IMG_IR_IRQ_EDGE;
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en);
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE);
+ spin_unlock_irq(&priv->lock);
+
+ rc_unregister_device(rdev);
+
+ del_timer_sync(&raw->timer);
+}
diff --git a/drivers/media/rc/img-ir/img-ir-raw.h b/drivers/media/rc/img-ir/img-ir-raw.h
new file mode 100644
index 0000000000..0441af70d4
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-raw.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Raw Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_RAW_H_
+#define _IMG_IR_RAW_H_
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_RAW
+
+/**
+ * struct img_ir_priv_raw - Private driver data for raw decoder.
+ * @rdev: Raw remote control device
+ * @timer: Timer to echo samples to keep soft decoders happy.
+ * @last_status: Last raw status bits.
+ */
+struct img_ir_priv_raw {
+ struct rc_dev *rdev;
+ struct timer_list timer;
+ u32 last_status;
+};
+
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+ return raw->rdev;
+};
+
+void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_raw(struct img_ir_priv *priv);
+int img_ir_probe_raw(struct img_ir_priv *priv);
+void img_ir_remove_raw(struct img_ir_priv *priv);
+
+#else
+
+struct img_ir_priv_raw {
+};
+static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw)
+{
+ return false;
+};
+static inline void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_raw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_raw(struct img_ir_priv *priv)
+{
+ return -ENODEV;
+}
+static inline void img_ir_remove_raw(struct img_ir_priv *priv)
+{
+}
+
+#endif /* CONFIG_IR_IMG_RAW */
+
+#endif /* _IMG_IR_RAW_H_ */
diff --git a/drivers/media/rc/img-ir/img-ir-rc5.c b/drivers/media/rc/img-ir/img-ir-rc5.c
new file mode 100644
index 0000000000..23c8e2397b
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc5.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Philips RC-5 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC5 data to a scancode */
+static int img_ir_rc5_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, cmd, tgl, start;
+
+ /* Quirk in the decoder shifts everything by 2 to the left. */
+ raw >>= 2;
+
+ start = (raw >> 13) & 0x01;
+ tgl = (raw >> 11) & 0x01;
+ addr = (raw >> 6) & 0x1f;
+ cmd = raw & 0x3f;
+ /*
+ * 12th bit is used to extend the command in extended RC5 and has
+ * no effect on standard RC5.
+ */
+ cmd += ((raw >> 12) & 0x01) ? 0 : 0x40;
+
+ if (!start)
+ return -EINVAL;
+
+ request->protocol = RC_PROTO_RC5;
+ request->scancode = addr << 8 | cmd;
+ request->toggle = tgl;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert RC5 scancode to RC5 data filter */
+static int img_ir_rc5_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ /* Not supported by the hw. */
+ return -EINVAL;
+}
+
+/*
+ * RC-5 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc5.php
+ */
+struct img_ir_decoder img_ir_rc5 = {
+ .type = RC_PROTO_BIT_RC5,
+ .control = {
+ .bitoriend2 = 1,
+ .code_type = IMG_IR_CODETYPE_BIPHASE,
+ .decodend2 = 1,
+ },
+ /* main timings */
+ .tolerance = 16,
+ .unit = 888888, /* 1/36k*32=888.888microseconds */
+ .timings = {
+ /* 10 symbol */
+ .s10 = {
+ .pulse = { 1 },
+ .space = { 1 },
+ },
+
+ /* 11 symbol */
+ .s11 = {
+ .pulse = { 1 },
+ .space = { 1 },
+ },
+
+ /* free time */
+ .ft = {
+ .minlen = 14,
+ .maxlen = 14,
+ .ft_min = 5,
+ },
+ },
+
+ /* scancode logic */
+ .scancode = img_ir_rc5_scancode,
+ .filter = img_ir_rc5_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-rc6.c b/drivers/media/rc/img-ir/img-ir-rc6.c
new file mode 100644
index 0000000000..b2bf468864
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc6.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Philips RC-6 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC6 data to a scancode */
+static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, cmd, mode, trl1, trl2;
+
+ /*
+ * Due to a side effect of the decoder handling the double length
+ * Trailer bit, the header information is a bit scrambled, and the
+ * raw data is shifted incorrectly.
+ * This workaround effectively recovers the header bits.
+ *
+ * The Header field should look like this:
+ *
+ * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit
+ *
+ * But what we get is:
+ *
+ * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2
+ *
+ * The start bit is not important to recover the scancode.
+ */
+
+ raw >>= 27;
+
+ trl1 = (raw >> 17) & 0x01;
+ trl2 = (raw >> 16) & 0x01;
+
+ mode = (raw >> 18) & 0x07;
+ addr = (raw >> 8) & 0xff;
+ cmd = raw & 0xff;
+
+ /*
+ * Due to the above explained irregularity the trailer bits cannot
+ * have the same value.
+ */
+ if (trl1 == trl2)
+ return -EINVAL;
+
+ /* Only mode 0 supported for now */
+ if (mode)
+ return -EINVAL;
+
+ request->protocol = RC_PROTO_RC6_0;
+ request->scancode = addr << 8 | cmd;
+ request->toggle = trl2;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert RC6 scancode to RC6 data filter */
+static int img_ir_rc6_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ /* Not supported by the hw. */
+ return -EINVAL;
+}
+
+/*
+ * RC-6 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc6.php
+ */
+struct img_ir_decoder img_ir_rc6 = {
+ .type = RC_PROTO_BIT_RC6_0,
+ .control = {
+ .bitorien = 1,
+ .code_type = IMG_IR_CODETYPE_BIPHASE,
+ .decoden = 1,
+ .decodinpol = 1,
+ },
+ /* main timings */
+ .tolerance = 20,
+ /*
+ * Due to a quirk in the img-ir decoder, default header values do
+ * not work, the values described below were extracted from
+ * successful RTL test cases.
+ */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 650 },
+ .space = { 660 },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 370 },
+ .space = { 370 },
+ },
+ /* 01 symbol */
+ .s01 = {
+ .pulse = { 370 },
+ .space = { 370 },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 21,
+ .maxlen = 21,
+ .ft_min = 2666, /* 2.666 ms */
+ },
+ },
+
+ /* scancode logic */
+ .scancode = img_ir_rc6_scancode,
+ .filter = img_ir_rc6_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sanyo.c b/drivers/media/rc/img-ir/img-ir-sanyo.c
new file mode 100644
index 0000000000..16e1f41447
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sanyo.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sanyo protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * From ir-sanyo-decoder.c:
+ *
+ * This protocol uses the NEC protocol timings. However, data is formatted as:
+ * 13 bits Custom Code
+ * 13 bits NOT(Custom Code)
+ * 8 bits Key data
+ * 8 bits NOT(Key data)
+ *
+ * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon
+ * Information for this protocol is available at the Sanyo LC7461 datasheet.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sanyo data to a scancode */
+static int img_ir_sanyo_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ /* a repeat code has no data */
+ if (!len)
+ return IMG_IR_REPEATCODE;
+ if (len != 42)
+ return -EINVAL;
+ addr = (raw >> 0) & 0x1fff;
+ addr_inv = (raw >> 13) & 0x1fff;
+ data = (raw >> 26) & 0xff;
+ data_inv = (raw >> 34) & 0xff;
+ /* Validate data */
+ if ((data_inv ^ data) != 0xff)
+ return -EINVAL;
+ /* Validate address */
+ if ((addr_inv ^ addr) != 0x1fff)
+ return -EINVAL;
+
+ /* Normal Sanyo */
+ request->protocol = RC_PROTO_SANYO;
+ request->scancode = addr << 8 | data;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert Sanyo scancode to Sanyo data filter */
+static int img_ir_sanyo_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ unsigned int addr_m, data_m;
+
+ data = in->data & 0xff;
+ data_m = in->mask & 0xff;
+ data_inv = data ^ 0xff;
+
+ if (in->data & 0xff700000)
+ return -EINVAL;
+
+ addr = (in->data >> 8) & 0x1fff;
+ addr_m = (in->mask >> 8) & 0x1fff;
+ addr_inv = addr ^ 0x1fff;
+
+ out->data = (u64)data_inv << 34 |
+ (u64)data << 26 |
+ addr_inv << 13 |
+ addr;
+ out->mask = (u64)data_m << 34 |
+ (u64)data_m << 26 |
+ addr_m << 13 |
+ addr_m;
+ return 0;
+}
+
+/* Sanyo decoder */
+struct img_ir_decoder img_ir_sanyo = {
+ .type = RC_PROTO_BIT_SANYO,
+ .control = {
+ .decoden = 1,
+ .code_type = IMG_IR_CODETYPE_PULSEDIST,
+ },
+ /* main timings */
+ .unit = 562500, /* 562.5 us */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 16 /* 9ms */ },
+ .space = { 8 /* 4.5ms */ },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 1 /* 562.5 us */ },
+ },
+ /* 1 symbol */
+ .s01 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 3 /* 1687.5 us */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 42,
+ .maxlen = 42,
+ .ft_min = 10, /* 5.625 ms */
+ },
+ },
+ /* repeat codes */
+ .repeat = 108, /* 108 ms */
+ .rtimings = {
+ /* leader symbol */
+ .ldr = {
+ .space = { 4 /* 2.25 ms */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 0, /* repeat code has no data */
+ .maxlen = 0,
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_sanyo_scancode,
+ .filter = img_ir_sanyo_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sharp.c b/drivers/media/rc/img-ir/img-ir-sharp.c
new file mode 100644
index 0000000000..ce5d1a0df3
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sharp.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sharp protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sharp data to a scancode */
+static int img_ir_sharp_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int addr, cmd, exp, chk;
+
+ if (len != 15)
+ return -EINVAL;
+
+ addr = (raw >> 0) & 0x1f;
+ cmd = (raw >> 5) & 0xff;
+ exp = (raw >> 13) & 0x1;
+ chk = (raw >> 14) & 0x1;
+
+ /* validate data */
+ if (!exp)
+ return -EINVAL;
+ if (chk)
+ /* probably the second half of the message */
+ return -EINVAL;
+
+ request->protocol = RC_PROTO_SHARP;
+ request->scancode = addr << 8 | cmd;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert Sharp scancode to Sharp data filter */
+static int img_ir_sharp_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int addr, cmd, exp = 0, chk = 0;
+ unsigned int addr_m, cmd_m, exp_m = 0, chk_m = 0;
+
+ addr = (in->data >> 8) & 0x1f;
+ addr_m = (in->mask >> 8) & 0x1f;
+ cmd = (in->data >> 0) & 0xff;
+ cmd_m = (in->mask >> 0) & 0xff;
+ if (cmd_m) {
+ /* if filtering commands, we can only match the first part */
+ exp = 1;
+ exp_m = 1;
+ chk = 0;
+ chk_m = 1;
+ }
+
+ out->data = addr |
+ cmd << 5 |
+ exp << 13 |
+ chk << 14;
+ out->mask = addr_m |
+ cmd_m << 5 |
+ exp_m << 13 |
+ chk_m << 14;
+
+ return 0;
+}
+
+/*
+ * Sharp decoder
+ * See also http://www.sbprojects.com/knowledge/ir/sharp.php
+ */
+struct img_ir_decoder img_ir_sharp = {
+ .type = RC_PROTO_BIT_SHARP,
+ .control = {
+ .decoden = 0,
+ .decodend2 = 1,
+ .code_type = IMG_IR_CODETYPE_PULSEDIST,
+ .d1validsel = 1,
+ },
+ /* main timings */
+ .tolerance = 20, /* 20% */
+ .timings = {
+ /* 0 symbol */
+ .s10 = {
+ .pulse = { 320 /* 320 us */ },
+ .space = { 680 /* 1 ms period */ },
+ },
+ /* 1 symbol */
+ .s11 = {
+ .pulse = { 320 /* 320 us */ },
+ .space = { 1680 /* 2 ms period */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 15,
+ .maxlen = 15,
+ .ft_min = 5000, /* 5 ms */
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_sharp_scancode,
+ .filter = img_ir_sharp_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sony.c b/drivers/media/rc/img-ir/img-ir-sony.c
new file mode 100644
index 0000000000..dd46c0b71b
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-sony.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ImgTec IR Decoder setup for Sony (SIRC) protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sony data to a scancode */
+static int img_ir_sony_scancode(int len, u64 raw, u64 enabled_protocols,
+ struct img_ir_scancode_req *request)
+{
+ unsigned int dev, subdev, func;
+
+ switch (len) {
+ case 12:
+ if (!(enabled_protocols & RC_PROTO_BIT_SONY12))
+ return -EINVAL;
+ func = raw & 0x7f; /* first 7 bits */
+ raw >>= 7;
+ dev = raw & 0x1f; /* next 5 bits */
+ subdev = 0;
+ request->protocol = RC_PROTO_SONY12;
+ break;
+ case 15:
+ if (!(enabled_protocols & RC_PROTO_BIT_SONY15))
+ return -EINVAL;
+ func = raw & 0x7f; /* first 7 bits */
+ raw >>= 7;
+ dev = raw & 0xff; /* next 8 bits */
+ subdev = 0;
+ request->protocol = RC_PROTO_SONY15;
+ break;
+ case 20:
+ if (!(enabled_protocols & RC_PROTO_BIT_SONY20))
+ return -EINVAL;
+ func = raw & 0x7f; /* first 7 bits */
+ raw >>= 7;
+ dev = raw & 0x1f; /* next 5 bits */
+ raw >>= 5;
+ subdev = raw & 0xff; /* next 8 bits */
+ request->protocol = RC_PROTO_SONY20;
+ break;
+ default:
+ return -EINVAL;
+ }
+ request->scancode = dev << 16 | subdev << 8 | func;
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert NEC scancode to NEC data filter */
+static int img_ir_sony_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int dev, subdev, func;
+ unsigned int dev_m, subdev_m, func_m;
+ unsigned int len = 0;
+
+ dev = (in->data >> 16) & 0xff;
+ dev_m = (in->mask >> 16) & 0xff;
+ subdev = (in->data >> 8) & 0xff;
+ subdev_m = (in->mask >> 8) & 0xff;
+ func = (in->data >> 0) & 0x7f;
+ func_m = (in->mask >> 0) & 0x7f;
+
+ protocols &= RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 |
+ RC_PROTO_BIT_SONY20;
+
+ /*
+ * If only one bit is set, we were requested to do an exact
+ * protocol. This should be the case for wakeup filters; for
+ * normal filters, guess the protocol from the scancode.
+ */
+ if (!is_power_of_2(protocols)) {
+ if (subdev & subdev_m)
+ protocols = RC_PROTO_BIT_SONY20;
+ else if (dev & dev_m & 0xe0)
+ protocols = RC_PROTO_BIT_SONY15;
+ else
+ protocols = RC_PROTO_BIT_SONY12;
+ }
+
+ if (protocols == RC_PROTO_BIT_SONY20) {
+ /* can't encode subdev and higher device bits */
+ if (dev & dev_m & 0xe0)
+ return -EINVAL;
+ len = 20;
+ dev_m &= 0x1f;
+ } else if (protocols == RC_PROTO_BIT_SONY15) {
+ len = 15;
+ subdev_m = 0;
+ } else {
+ /*
+ * The hardware mask cannot distinguish high device bits and low
+ * extended bits, so logically AND those bits of the masks
+ * together.
+ */
+ subdev_m &= (dev_m >> 5) | 0xf8;
+ dev_m &= 0x1f;
+ }
+
+ /* ensure there aren't any bits straying between fields */
+ dev &= dev_m;
+ subdev &= subdev_m;
+
+ /* write the hardware filter */
+ out->data = func |
+ dev << 7 |
+ subdev << 15;
+ out->mask = func_m |
+ dev_m << 7 |
+ subdev_m << 15;
+
+ if (len) {
+ out->minlen = len;
+ out->maxlen = len;
+ }
+ return 0;
+}
+
+/*
+ * Sony SIRC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/sirc.php
+ * http://picprojects.org.uk/projects/sirc/sonysirc.pdf
+ */
+struct img_ir_decoder img_ir_sony = {
+ .type = RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | RC_PROTO_BIT_SONY20,
+ .control = {
+ .decoden = 1,
+ .code_type = IMG_IR_CODETYPE_PULSELEN,
+ },
+ /* main timings */
+ .unit = 600000, /* 600 us */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 4 /* 2.4 ms */ },
+ .space = { 1 /* 600 us */ },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 1 /* 600 us */ },
+ .space = { 1 /* 600 us */ },
+ },
+ /* 1 symbol */
+ .s01 = {
+ .pulse = { 2 /* 1.2 ms */ },
+ .space = { 1 /* 600 us */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 12,
+ .maxlen = 20,
+ .ft_min = 10, /* 6 ms */
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_sony_scancode,
+ .filter = img_ir_sony_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir.h b/drivers/media/rc/img-ir/img-ir.h
new file mode 100644
index 0000000000..a0153c3116
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ImgTec IR Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_H_
+#define _IMG_IR_H_
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include "img-ir-raw.h"
+#include "img-ir-hw.h"
+
+/* registers */
+
+/* relative to the start of the IR block of registers */
+#define IMG_IR_CONTROL 0x00
+#define IMG_IR_STATUS 0x04
+#define IMG_IR_DATA_LW 0x08
+#define IMG_IR_DATA_UP 0x0c
+#define IMG_IR_LEAD_SYMB_TIMING 0x10
+#define IMG_IR_S00_SYMB_TIMING 0x14
+#define IMG_IR_S01_SYMB_TIMING 0x18
+#define IMG_IR_S10_SYMB_TIMING 0x1c
+#define IMG_IR_S11_SYMB_TIMING 0x20
+#define IMG_IR_FREE_SYMB_TIMING 0x24
+#define IMG_IR_POW_MOD_PARAMS 0x28
+#define IMG_IR_POW_MOD_ENABLE 0x2c
+#define IMG_IR_IRQ_MSG_DATA_LW 0x30
+#define IMG_IR_IRQ_MSG_DATA_UP 0x34
+#define IMG_IR_IRQ_MSG_MASK_LW 0x38
+#define IMG_IR_IRQ_MSG_MASK_UP 0x3c
+#define IMG_IR_IRQ_ENABLE 0x40
+#define IMG_IR_IRQ_STATUS 0x44
+#define IMG_IR_IRQ_CLEAR 0x48
+#define IMG_IR_IRCORE_ID 0xf0
+#define IMG_IR_CORE_REV 0xf4
+#define IMG_IR_CORE_DES1 0xf8
+#define IMG_IR_CORE_DES2 0xfc
+
+
+/* field masks */
+
+/* IMG_IR_CONTROL */
+#define IMG_IR_DECODEN 0x40000000
+#define IMG_IR_CODETYPE 0x30000000
+#define IMG_IR_CODETYPE_SHIFT 28
+#define IMG_IR_HDRTOG 0x08000000
+#define IMG_IR_LDRDEC 0x04000000
+#define IMG_IR_DECODINPOL 0x02000000 /* active high */
+#define IMG_IR_BITORIEN 0x01000000 /* MSB first */
+#define IMG_IR_D1VALIDSEL 0x00008000
+#define IMG_IR_BITINV 0x00000040 /* don't invert */
+#define IMG_IR_DECODEND2 0x00000010
+#define IMG_IR_BITORIEND2 0x00000002 /* MSB first */
+#define IMG_IR_BITINVD2 0x00000001 /* don't invert */
+
+/* IMG_IR_STATUS */
+#define IMG_IR_RXDVALD2 0x00001000
+#define IMG_IR_IRRXD 0x00000400
+#define IMG_IR_TOGSTATE 0x00000200
+#define IMG_IR_RXDVAL 0x00000040
+#define IMG_IR_RXDLEN 0x0000003f
+#define IMG_IR_RXDLEN_SHIFT 0
+
+/* IMG_IR_LEAD_SYMB_TIMING, IMG_IR_Sxx_SYMB_TIMING */
+#define IMG_IR_PD_MAX 0xff000000
+#define IMG_IR_PD_MAX_SHIFT 24
+#define IMG_IR_PD_MIN 0x00ff0000
+#define IMG_IR_PD_MIN_SHIFT 16
+#define IMG_IR_W_MAX 0x0000ff00
+#define IMG_IR_W_MAX_SHIFT 8
+#define IMG_IR_W_MIN 0x000000ff
+#define IMG_IR_W_MIN_SHIFT 0
+
+/* IMG_IR_FREE_SYMB_TIMING */
+#define IMG_IR_MAXLEN 0x0007e000
+#define IMG_IR_MAXLEN_SHIFT 13
+#define IMG_IR_MINLEN 0x00001f00
+#define IMG_IR_MINLEN_SHIFT 8
+#define IMG_IR_FT_MIN 0x000000ff
+#define IMG_IR_FT_MIN_SHIFT 0
+
+/* IMG_IR_POW_MOD_PARAMS */
+#define IMG_IR_PERIOD_LEN 0x3f000000
+#define IMG_IR_PERIOD_LEN_SHIFT 24
+#define IMG_IR_PERIOD_DUTY 0x003f0000
+#define IMG_IR_PERIOD_DUTY_SHIFT 16
+#define IMG_IR_STABLE_STOP 0x00003f00
+#define IMG_IR_STABLE_STOP_SHIFT 8
+#define IMG_IR_STABLE_START 0x0000003f
+#define IMG_IR_STABLE_START_SHIFT 0
+
+/* IMG_IR_POW_MOD_ENABLE */
+#define IMG_IR_POWER_OUT_EN 0x00000002
+#define IMG_IR_POWER_MOD_EN 0x00000001
+
+/* IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_STATUS, IMG_IR_IRQ_CLEAR */
+#define IMG_IR_IRQ_DEC2_ERR 0x00000080
+#define IMG_IR_IRQ_DEC_ERR 0x00000040
+#define IMG_IR_IRQ_ACT_LEVEL 0x00000020
+#define IMG_IR_IRQ_FALL_EDGE 0x00000010
+#define IMG_IR_IRQ_RISE_EDGE 0x00000008
+#define IMG_IR_IRQ_DATA_MATCH 0x00000004
+#define IMG_IR_IRQ_DATA2_VALID 0x00000002
+#define IMG_IR_IRQ_DATA_VALID 0x00000001
+#define IMG_IR_IRQ_ALL 0x000000ff
+#define IMG_IR_IRQ_EDGE (IMG_IR_IRQ_FALL_EDGE | IMG_IR_IRQ_RISE_EDGE)
+
+/* IMG_IR_CORE_ID */
+#define IMG_IR_CORE_ID 0x00ff0000
+#define IMG_IR_CORE_ID_SHIFT 16
+#define IMG_IR_CORE_CONFIG 0x0000ffff
+#define IMG_IR_CORE_CONFIG_SHIFT 0
+
+/* IMG_IR_CORE_REV */
+#define IMG_IR_DESIGNER 0xff000000
+#define IMG_IR_DESIGNER_SHIFT 24
+#define IMG_IR_MAJOR_REV 0x00ff0000
+#define IMG_IR_MAJOR_REV_SHIFT 16
+#define IMG_IR_MINOR_REV 0x0000ff00
+#define IMG_IR_MINOR_REV_SHIFT 8
+#define IMG_IR_MAINT_REV 0x000000ff
+#define IMG_IR_MAINT_REV_SHIFT 0
+
+struct device;
+struct clk;
+
+/**
+ * struct img_ir_priv - Private driver data.
+ * @dev: Platform device.
+ * @irq: IRQ number.
+ * @clk: Input clock.
+ * @sys_clk: System clock.
+ * @reg_base: Iomem base address of IR register block.
+ * @lock: Protects IR registers and variables in this struct.
+ * @raw: Driver data for raw decoder.
+ * @hw: Driver data for hardware decoder.
+ */
+struct img_ir_priv {
+ struct device *dev;
+ int irq;
+ struct clk *clk;
+ struct clk *sys_clk;
+ void __iomem *reg_base;
+ spinlock_t lock;
+
+ struct img_ir_priv_raw raw;
+ struct img_ir_priv_hw hw;
+};
+
+/* Hardware access */
+
+static inline void img_ir_write(struct img_ir_priv *priv,
+ unsigned int reg_offs, unsigned int data)
+{
+ iowrite32(data, priv->reg_base + reg_offs);
+}
+
+static inline unsigned int img_ir_read(struct img_ir_priv *priv,
+ unsigned int reg_offs)
+{
+ return ioread32(priv->reg_base + reg_offs);
+}
+
+#endif /* _IMG_IR_H_ */