Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 451 insertions, 71 deletions

diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index 70322fab34..5303e6da58 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -20,48 +20,196 @@
 
 #define DRIVER_NAME		"meson-ir"
 
-#define IR_DEC_LDR_ACTIVE	0x00
-#define IR_DEC_LDR_IDLE		0x04
-#define IR_DEC_LDR_REPEAT	0x08
-#define IR_DEC_BIT_0		0x0c
-#define IR_DEC_REG0		0x10
-#define IR_DEC_REG0_BASE_TIME	GENMASK(11, 0)
-#define IR_DEC_FRAME		0x14
-#define IR_DEC_STATUS		0x18
-#define IR_DEC_STATUS_PULSE	BIT(8)
-#define IR_DEC_REG1		0x1c
-#define IR_DEC_REG1_TIME_IV	GENMASK(28, 16)
-#define IR_DEC_REG1_ENABLE	BIT(15)
-#define IR_DEC_REG1_MODE	GENMASK(8, 7)
-#define IR_DEC_REG1_IRQSEL	GENMASK(3, 2)
-#define IR_DEC_REG1_RESET	BIT(0)
-/* The following regs are only available on Meson 8b and newer */
-#define IR_DEC_REG2		0x20
-#define IR_DEC_REG2_MODE	GENMASK(3, 0)
-
-#define DEC_MODE_NEC		0x0
-#define DEC_MODE_RAW		0x2
-
-#define IRQSEL_NEC_MODE		0
-#define IRQSEL_RISE_FALL	1
-#define IRQSEL_FALL		2
-#define IRQSEL_RISE		3
-
-#define MESON_RAW_TRATE		10	/* us */
-#define MESON_HW_TRATE		20	/* us */
+#define IR_DEC_LDR_ACTIVE			0x00
+#define IR_DEC_LDR_ACTIVE_MAX			GENMASK(28, 16)
+#define IR_DEC_LDR_ACTIVE_MIN			GENMASK(12, 0)
+#define IR_DEC_LDR_IDLE				0x04
+#define IR_DEC_LDR_IDLE_MAX			GENMASK(28, 16)
+#define IR_DEC_LDR_IDLE_MIN			GENMASK(12, 0)
+#define IR_DEC_LDR_REPEAT			0x08
+#define IR_DEC_LDR_REPEAT_MAX			GENMASK(25, 16)
+#define IR_DEC_LDR_REPEAT_MIN			GENMASK(9, 0)
+#define IR_DEC_BIT_0				0x0c
+#define IR_DEC_BIT_0_MAX			GENMASK(25, 16)
+#define IR_DEC_BIT_0_MIN			GENMASK(9, 0)
+#define IR_DEC_REG0				0x10
+#define IR_DEC_REG0_FILTER			GENMASK(30, 28)
+#define IR_DEC_REG0_FRAME_TIME_MAX		GENMASK(24, 12)
+#define IR_DEC_REG0_BASE_TIME			GENMASK(11, 0)
+#define IR_DEC_FRAME				0x14
+#define IR_DEC_STATUS				0x18
+#define IR_DEC_STATUS_BIT_1_ENABLE		BIT(30)
+#define IR_DEC_STATUS_BIT_1_MAX			GENMASK(29, 20)
+#define IR_DEC_STATUS_BIT_1_MIN			GENMASK(19, 10)
+#define IR_DEC_STATUS_PULSE			BIT(8)
+#define IR_DEC_STATUS_BUSY			BIT(7)
+#define IR_DEC_STATUS_FRAME_STATUS		GENMASK(3, 0)
+#define IR_DEC_REG1				0x1c
+#define IR_DEC_REG1_TIME_IV			GENMASK(28, 16)
+#define IR_DEC_REG1_FRAME_LEN			GENMASK(13, 8)
+#define IR_DEC_REG1_ENABLE			BIT(15)
+#define IR_DEC_REG1_HOLD_CODE			BIT(6)
+#define IR_DEC_REG1_IRQSEL			GENMASK(3, 2)
+#define IR_DEC_REG1_RESET			BIT(0)
+/* Meson 6b uses REG1 to configure IR mode */
+#define IR_DEC_REG1_MODE			GENMASK(8, 7)
+
+/* The following registers are only available on Meson 8b and newer */
+#define IR_DEC_REG2				0x20
+#define IR_DEC_REG2_TICK_MODE			BIT(15)
+#define IR_DEC_REG2_REPEAT_COUNTER		BIT(13)
+#define IR_DEC_REG2_REPEAT_TIME			BIT(12)
+#define IR_DEC_REG2_COMPARE_FRAME		BIT(11)
+#define IR_DEC_REG2_BIT_ORDER			BIT(8)
+/* Meson 8b / GXBB use REG2 to configure IR mode */
+#define IR_DEC_REG2_MODE			GENMASK(3, 0)
+#define IR_DEC_DURATN2				0x24
+#define IR_DEC_DURATN2_MAX			GENMASK(25, 16)
+#define IR_DEC_DURATN2_MIN			GENMASK(9, 0)
+#define IR_DEC_DURATN3				0x28
+#define IR_DEC_DURATN3_MAX			GENMASK(25, 16)
+#define IR_DEC_DURATN3_MIN			GENMASK(9, 0)
+#define IR_DEC_FRAME1				0x2c
+
+#define FRAME_MSB_FIRST				true
+#define FRAME_LSB_FIRST				false
+
+#define DEC_MODE_NEC				0x0
+#define DEC_MODE_RAW				0x2
+#define DEC_MODE_RC6				0x9
+#define DEC_MODE_XMP				0xE
+#define DEC_MODE_UNKNOW				0xFF
+
+#define DEC_STATUS_VALID			BIT(3)
+#define DEC_STATUS_DATA_CODE_ERR		BIT(2)
+#define DEC_STATUS_CUSTOM_CODE_ERR		BIT(1)
+#define DEC_STATUS_REPEAT			BIT(0)
+
+#define IRQSEL_DEC_MODE				0
+#define IRQSEL_RISE_FALL			1
+#define IRQSEL_FALL				2
+#define IRQSEL_RISE				3
+
+#define MESON_RAW_TRATE				10	/* us */
+#define MESON_HW_TRATE				20	/* us */
+
+/**
+ * struct meson_ir_protocol - describe IR Protocol parameter
+ *
+ * @hw_protocol: select IR Protocol from IR Controller
+ * @repeat_counter_enable: enable frame-to-frame time counter, it should work
+ *                         with @repeat_compare_enable to detect the repeat frame
+ * @repeat_check_enable: enable repeat time check for repeat detection
+ * @repeat_compare_enable: enable to compare frame for repeat frame detection.
+ *                         Some IR Protocol send the same data as repeat frame.
+ *                         In this case, it should work with
+ *                         @repeat_counter_enable to detect the repeat frame.
+ * @bit_order: bit order, LSB or MSB
+ * @bit1_match_enable: enable to check bit 1
+ * @hold_code_enable: hold frame code in register IR_DEC_FRAME1, the new one
+ *                    frame code will not be store in IR_DEC_FRAME1.
+ *                    until IR_DEC_FRAME1 has been read
+ * @count_tick_mode: increasing time unit of frame-to-frame time counter.
+ *                   0 = 100us, 1 = 10us
+ * @code_length: length (N-1) of data frame
+ * @frame_time_max: max time for whole frame. Unit: MESON_HW_TRATE
+ * @leader_active_max: max time for NEC/RC6 leader active part. Unit: MESON_HW_TRATE
+ * @leader_active_min: min time for NEC/RC6 leader active part. Unit: MESON_HW_TRATE
+ * @leader_idle_max: max time for NEC/RC6 leader idle part. Unit: MESON_HW_TRATE
+ * @leader_idle_min: min time for NEC/RC6 leader idle part. Unit: MESON_HW_TRATE
+ * @repeat_leader_max: max time for NEC repeat leader idle part. Unit: MESON_HW_TRATE
+ * @repeat_leader_min: min time for NEC repeat leader idle part. Unit: MESON_HW_TRATE
+ * @bit0_max: max time for NEC Logic '0', half of RC6 trailer bit, XMP Logic '00'
+ * @bit0_min: min time for NEC Logic '0', half of RC6 trailer bit, XMP Logic '00'
+ * @bit1_max: max time for NEC Logic '1', whole of RC6 trailer bit, XMP Logic '01'
+ * @bit1_min: min time for NEC Logic '1', whole of RC6 trailer bit, XMP Logic '01'
+ * @duration2_max: max time for half of RC6 normal bit, XMP Logic '10'
+ * @duration2_min: min time for half of RC6 normal bit, XMP Logic '10'
+ * @duration3_max: max time for whole of RC6 normal bit, XMP Logic '11'
+ * @duration3_min: min time for whole of RC6 normal bit, XMP Logic '11'
+ */
+
+struct meson_ir_protocol {
+	u8 hw_protocol;
+	bool repeat_counter_enable;
+	bool repeat_check_enable;
+	bool repeat_compare_enable;
+	bool bit_order;
+	bool bit1_match_enable;
+	bool hold_code_enable;
+	bool count_tick_mode;
+	u8 code_length;
+	u16 frame_time_max;
+	u16 leader_active_max;
+	u16 leader_active_min;
+	u16 leader_idle_max;
+	u16 leader_idle_min;
+	u16 repeat_leader_max;
+	u16 repeat_leader_min;
+	u16 bit0_max;
+	u16 bit0_min;
+	u16 bit1_max;
+	u16 bit1_min;
+	u16 duration2_max;
+	u16 duration2_min;
+	u16 duration3_max;
+	u16 duration3_min;
+};
+
+struct meson_ir_param {
+	bool support_hw_decoder;
+	unsigned int max_register;
+};
 
 struct meson_ir {
+	const struct meson_ir_param *param;
 	struct regmap	*reg;
 	struct rc_dev	*rc;
 	spinlock_t	lock;
 };
 
-static const struct regmap_config meson_ir_regmap_config = {
+static struct regmap_config meson_ir_regmap_config = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
 };
 
+static const struct meson_ir_protocol protocol_timings[] = {
+	/* protocol, repeat counter, repeat check, repeat compare, order */
+	{DEC_MODE_NEC, false, false, false, FRAME_LSB_FIRST,
+	/* bit 1 match, hold code, count tick, len, frame time */
+	true, false, false, 32, 4000,
+	/* leader active max/min, leader idle max/min, repeat leader max/min */
+	500, 400, 300, 200, 150, 80,
+	/* bit0 max/min, bit1 max/min, duration2 max/min, duration3 max/min */
+	72, 40, 134, 90, 0, 0, 0, 0}
+};
+
+static void meson_ir_nec_handler(struct meson_ir *ir)
+{
+	u32 code = 0;
+	u32 status = 0;
+	enum rc_proto proto;
+
+	regmap_read(ir->reg, IR_DEC_STATUS, &status);
+
+	if (status & DEC_STATUS_REPEAT) {
+		rc_repeat(ir->rc);
+	} else {
+		regmap_read(ir->reg, IR_DEC_FRAME, &code);
+
+		code = ir_nec_bytes_to_scancode(code, code >> 8,
+						code >> 16, code >> 24, &proto);
+		rc_keydown(ir->rc, proto, code, 0);
+	}
+}
+
+static void meson_ir_hw_handler(struct meson_ir *ir)
+{
+	if (ir->rc->enabled_protocols & RC_PROTO_BIT_NEC)
+		meson_ir_nec_handler(ir);
+}
+
 static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
 {
 	struct meson_ir *ir = dev_id;
@@ -70,22 +218,232 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
 
 	spin_lock(&ir->lock);
 
-	regmap_read(ir->reg, IR_DEC_REG1, &duration);
-	duration = FIELD_GET(IR_DEC_REG1_TIME_IV, duration);
-	rawir.duration = duration * MESON_RAW_TRATE;
-
 	regmap_read(ir->reg, IR_DEC_STATUS, &status);
-	rawir.pulse = !!(status & IR_DEC_STATUS_PULSE);
 
-	ir_raw_event_store_with_timeout(ir->rc, &rawir);
+	if (ir->rc->driver_type == RC_DRIVER_IR_RAW) {
+		rawir.pulse = !!(status & IR_DEC_STATUS_PULSE);
+
+		regmap_read(ir->reg, IR_DEC_REG1, &duration);
+		duration = FIELD_GET(IR_DEC_REG1_TIME_IV, duration);
+		rawir.duration = duration * MESON_RAW_TRATE;
+
+		ir_raw_event_store_with_timeout(ir->rc, &rawir);
+	} else if (ir->rc->driver_type == RC_DRIVER_SCANCODE) {
+		if (status & DEC_STATUS_VALID)
+			meson_ir_hw_handler(ir);
+	}
 
 	spin_unlock(&ir->lock);
 
 	return IRQ_HANDLED;
 }
 
+static int meson_ir_hw_decoder_init(struct rc_dev *dev, u64 *rc_type)
+{
+	u8 protocol;
+	u32 regval;
+	int i;
+	unsigned long flags;
+	const struct meson_ir_protocol *timings;
+	struct meson_ir *ir = dev->priv;
+
+	if (*rc_type & RC_PROTO_BIT_NEC)
+		protocol = DEC_MODE_NEC;
+	else
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(protocol_timings); i++)
+		if (protocol_timings[i].hw_protocol == protocol)
+			break;
+
+	if (i == ARRAY_SIZE(protocol_timings)) {
+		dev_err(&dev->dev, "hw protocol isn't supported: %d\n",
+			protocol);
+		return -EINVAL;
+	}
+	timings = &protocol_timings[i];
+
+	spin_lock_irqsave(&ir->lock, flags);
+
+	/* Clear controller status */
+	regmap_read(ir->reg, IR_DEC_STATUS, &regval);
+	regmap_read(ir->reg, IR_DEC_FRAME, &regval);
+
+	/* Reset ir decoder and disable decoder */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE, 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET,
+			   IR_DEC_REG1_RESET);
+
+	/* Base time resolution, (19+1)*1us=20us */
+	regval = FIELD_PREP(IR_DEC_REG0_BASE_TIME, MESON_HW_TRATE - 1);
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME, regval);
+
+	/* Monitor timing for input filter */
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_FILTER,
+			   FIELD_PREP(IR_DEC_REG0_FILTER, 7));
+
+	/* HW protocol */
+	regval = FIELD_PREP(IR_DEC_REG2_MODE, timings->hw_protocol);
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_MODE, regval);
+
+	/* Hold frame data until register was read */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_HOLD_CODE,
+			   timings->hold_code_enable ?
+			   IR_DEC_REG1_HOLD_CODE : 0);
+
+	/* Bit order */
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_BIT_ORDER,
+			   timings->bit_order ? IR_DEC_REG2_BIT_ORDER : 0);
+
+	/* Select tick mode */
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_TICK_MODE,
+			   timings->count_tick_mode ?
+			   IR_DEC_REG2_TICK_MODE : 0);
+
+	/*
+	 * Some protocols transmit the same data frame as repeat frame
+	 * when the key is pressing. In this case, it could be detected as
+	 * repeat frame if the repeat checker was enabled.
+	 */
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_REPEAT_COUNTER,
+			   timings->repeat_counter_enable ?
+			   IR_DEC_REG2_REPEAT_COUNTER : 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_REPEAT_TIME,
+			   timings->repeat_check_enable ?
+			   IR_DEC_REG2_REPEAT_TIME : 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_COMPARE_FRAME,
+			   timings->repeat_compare_enable ?
+			   IR_DEC_REG2_COMPARE_FRAME : 0);
+
+	/*
+	 * FRAME_TIME_MAX should be larger than the time between
+	 * data frame and repeat frame
+	 */
+	regval = FIELD_PREP(IR_DEC_REG0_FRAME_TIME_MAX,
+			    timings->frame_time_max);
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_FRAME_TIME_MAX,
+			   regval);
+
+	/* Length(N-1) of data frame */
+	regval = FIELD_PREP(IR_DEC_REG1_FRAME_LEN, timings->code_length - 1);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_FRAME_LEN, regval);
+
+	/* Time for leader active part */
+	regval = FIELD_PREP(IR_DEC_LDR_ACTIVE_MAX,
+			    timings->leader_active_max) |
+		 FIELD_PREP(IR_DEC_LDR_ACTIVE_MIN,
+			    timings->leader_active_min);
+	regmap_update_bits(ir->reg, IR_DEC_LDR_ACTIVE, IR_DEC_LDR_ACTIVE_MAX |
+			   IR_DEC_LDR_ACTIVE_MIN, regval);
+
+	/* Time for leader idle part */
+	regval = FIELD_PREP(IR_DEC_LDR_IDLE_MAX, timings->leader_idle_max) |
+		 FIELD_PREP(IR_DEC_LDR_IDLE_MIN, timings->leader_idle_min);
+	regmap_update_bits(ir->reg, IR_DEC_LDR_IDLE,
+			   IR_DEC_LDR_IDLE_MAX | IR_DEC_LDR_IDLE_MIN, regval);
+
+	/* Time for repeat leader idle part */
+	regval = FIELD_PREP(IR_DEC_LDR_REPEAT_MAX, timings->repeat_leader_max) |
+		 FIELD_PREP(IR_DEC_LDR_REPEAT_MIN, timings->repeat_leader_min);
+	regmap_update_bits(ir->reg, IR_DEC_LDR_REPEAT, IR_DEC_LDR_REPEAT_MAX |
+			   IR_DEC_LDR_REPEAT_MIN, regval);
+
+	/*
+	 * NEC: Time for logic '0'
+	 * RC6: Time for half of trailer bit
+	 */
+	regval = FIELD_PREP(IR_DEC_BIT_0_MAX, timings->bit0_max) |
+		 FIELD_PREP(IR_DEC_BIT_0_MIN, timings->bit0_min);
+	regmap_update_bits(ir->reg, IR_DEC_BIT_0,
+			   IR_DEC_BIT_0_MAX | IR_DEC_BIT_0_MIN, regval);
+
+	/*
+	 * NEC: Time for logic '1'
+	 * RC6: Time for whole of trailer bit
+	 */
+	regval = FIELD_PREP(IR_DEC_STATUS_BIT_1_MAX, timings->bit1_max) |
+		 FIELD_PREP(IR_DEC_STATUS_BIT_1_MIN, timings->bit1_min);
+	regmap_update_bits(ir->reg, IR_DEC_STATUS, IR_DEC_STATUS_BIT_1_MAX |
+			   IR_DEC_STATUS_BIT_1_MIN, regval);
+
+	/* Enable to match logic '1' */
+	regmap_update_bits(ir->reg, IR_DEC_STATUS, IR_DEC_STATUS_BIT_1_ENABLE,
+			   timings->bit1_match_enable ?
+			   IR_DEC_STATUS_BIT_1_ENABLE : 0);
+
+	/*
+	 * NEC: Unused
+	 * RC6: Time for halt of logic 0/1
+	 */
+	regval = FIELD_PREP(IR_DEC_DURATN2_MAX, timings->duration2_max) |
+		 FIELD_PREP(IR_DEC_DURATN2_MIN, timings->duration2_min);
+	regmap_update_bits(ir->reg, IR_DEC_DURATN2,
+			   IR_DEC_DURATN2_MAX | IR_DEC_DURATN2_MIN, regval);
+
+	/*
+	 * NEC: Unused
+	 * RC6: Time for whole logic 0/1
+	 */
+	regval = FIELD_PREP(IR_DEC_DURATN3_MAX, timings->duration3_max) |
+		 FIELD_PREP(IR_DEC_DURATN3_MIN, timings->duration3_min);
+	regmap_update_bits(ir->reg, IR_DEC_DURATN3,
+			   IR_DEC_DURATN3_MAX | IR_DEC_DURATN3_MIN, regval);
+
+	/* Reset ir decoder and enable decode */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET,
+			   IR_DEC_REG1_RESET);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
+			   IR_DEC_REG1_ENABLE);
+
+	spin_unlock_irqrestore(&ir->lock, flags);
+
+	dev_info(&dev->dev, "hw decoder init, protocol: %d\n", protocol);
+
+	return 0;
+}
+
+static void meson_ir_sw_decoder_init(struct rc_dev *dev)
+{
+	unsigned long flags;
+	struct meson_ir *ir = dev->priv;
+
+	spin_lock_irqsave(&ir->lock, flags);
+
+	/* Reset the decoder */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET,
+			   IR_DEC_REG1_RESET);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
+
+	/* Set general operation mode (= raw/software decoding) */
+	if (of_device_is_compatible(dev->dev.of_node, "amlogic,meson6-ir"))
+		regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_MODE,
+				   FIELD_PREP(IR_DEC_REG1_MODE,
+					      DEC_MODE_RAW));
+	else
+		regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_MODE,
+				   FIELD_PREP(IR_DEC_REG2_MODE,
+					      DEC_MODE_RAW));
+
+	/* Set rate */
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
+			   FIELD_PREP(IR_DEC_REG0_BASE_TIME,
+				      MESON_RAW_TRATE - 1));
+	/* IRQ on rising and falling edges */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_IRQSEL,
+			   FIELD_PREP(IR_DEC_REG1_IRQSEL, IRQSEL_RISE_FALL));
+	/* Enable the decoder */
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
+			   IR_DEC_REG1_ENABLE);
+
+	spin_unlock_irqrestore(&ir->lock, flags);
+
+	dev_info(&dev->dev, "sw decoder init\n");
+}
+
 static int meson_ir_probe(struct platform_device *pdev)
 {
+	const struct meson_ir_param *match_data;
 	struct device *dev = &pdev->dev;
 	struct device_node *node = dev->of_node;
 	void __iomem *res_start;
@@ -97,10 +455,17 @@ static int meson_ir_probe(struct platform_device *pdev)
 	if (!ir)
 		return -ENOMEM;
 
+	match_data = of_device_get_match_data(dev);
+	if (!match_data)
+		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
+
+	ir->param = match_data;
+
 	res_start = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(res_start))
 		return PTR_ERR(res_start);
 
+	meson_ir_regmap_config.max_register = ir->param->max_register;
 	ir->reg = devm_regmap_init_mmio(&pdev->dev, res_start,
 					&meson_ir_regmap_config);
 	if (IS_ERR(ir->reg))
@@ -110,23 +475,34 @@ static int meson_ir_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW);
+	if (ir->param->support_hw_decoder)
+		ir->rc = devm_rc_allocate_device(&pdev->dev,
+						 RC_DRIVER_SCANCODE);
+	else
+		ir->rc = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW);
+
 	if (!ir->rc) {
 		dev_err(dev, "failed to allocate rc device\n");
 		return -ENOMEM;
 	}
 
+	if (ir->rc->driver_type == RC_DRIVER_IR_RAW) {
+		ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
+		ir->rc->rx_resolution = MESON_RAW_TRATE;
+		ir->rc->min_timeout = 1;
+		ir->rc->timeout = IR_DEFAULT_TIMEOUT;
+		ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+	} else if (ir->rc->driver_type == RC_DRIVER_SCANCODE) {
+		ir->rc->allowed_protocols = RC_PROTO_BIT_NEC;
+		ir->rc->change_protocol = meson_ir_hw_decoder_init;
+	}
+
 	ir->rc->priv = ir;
 	ir->rc->device_name = DRIVER_NAME;
 	ir->rc->input_phys = DRIVER_NAME "/input0";
 	ir->rc->input_id.bustype = BUS_HOST;
 	map_name = of_get_property(node, "linux,rc-map-name", NULL);
 	ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
-	ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
-	ir->rc->rx_resolution = MESON_RAW_TRATE;
-	ir->rc->min_timeout = 1;
-	ir->rc->timeout = IR_DEFAULT_TIMEOUT;
-	ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
 	ir->rc->driver_name = DRIVER_NAME;
 
 	spin_lock_init(&ir->lock);
@@ -138,36 +514,15 @@ static int meson_ir_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_request_irq(dev, irq, meson_ir_irq, 0, NULL, ir);
+	if (ir->rc->driver_type == RC_DRIVER_IR_RAW)
+		meson_ir_sw_decoder_init(ir->rc);
+
+	ret = devm_request_irq(dev, irq, meson_ir_irq, 0, "meson_ir", ir);
 	if (ret) {
 		dev_err(dev, "failed to request irq\n");
 		return ret;
 	}
 
-	/* Reset the decoder */
-	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET,
-			   IR_DEC_REG1_RESET);
-	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
-
-	/* Set general operation mode (= raw/software decoding) */
-	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
-		regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_MODE,
-				   FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_RAW));
-	else
-		regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_MODE,
-				   FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_RAW));
-
-	/* Set rate */
-	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
-			   FIELD_PREP(IR_DEC_REG0_BASE_TIME,
-				      MESON_RAW_TRATE - 1));
-	/* IRQ on rising and falling edges */
-	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_IRQSEL,
-			   FIELD_PREP(IR_DEC_REG1_IRQSEL, IRQSEL_RISE_FALL));
-	/* Enable the decoder */
-	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
-			   IR_DEC_REG1_ENABLE);
-
 	dev_info(dev, "receiver initialized\n");
 
 	return 0;
@@ -212,11 +567,36 @@ static void meson_ir_shutdown(struct platform_device *pdev)
 	spin_unlock_irqrestore(&ir->lock, flags);
 }
 
+static const struct meson_ir_param meson6_ir_param = {
+	.support_hw_decoder = false,
+	.max_register = IR_DEC_REG1,
+};
+
+static const struct meson_ir_param meson8b_ir_param = {
+	.support_hw_decoder = false,
+	.max_register = IR_DEC_REG2,
+};
+
+static const struct meson_ir_param meson_s4_ir_param = {
+	.support_hw_decoder = true,
+	.max_register = IR_DEC_FRAME1,
+};
+
 static const struct of_device_id meson_ir_match[] = {
-	{ .compatible = "amlogic,meson6-ir" },
-	{ .compatible = "amlogic,meson8b-ir" },
-	{ .compatible = "amlogic,meson-gxbb-ir" },
-	{ },
+	{
+		.compatible = "amlogic,meson6-ir",
+		.data = &meson6_ir_param,
+	}, {
+		.compatible = "amlogic,meson8b-ir",
+		.data = &meson8b_ir_param,
+	}, {
+		.compatible = "amlogic,meson-gxbb-ir",
+		.data = &meson8b_ir_param,
+	}, {
+		.compatible = "amlogic,meson-s4-ir",
+		.data = &meson_s4_ir_param,
+	},
+	{},
 };
 MODULE_DEVICE_TABLE(of, meson_ir_match);