Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 393 insertions, 0 deletions

diff --git a/drivers/media/usb/au0828/au0828-i2c.c b/drivers/media/usb/au0828/au0828-i2c.c
new file mode 100644
index 0000000000..749f90d73b
--- /dev/null
+++ b/drivers/media/usb/au0828/au0828-i2c.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Auvitek AU0828 USB bridge
+ *
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include "au0828.h"
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "media/tuner.h"
+#include <media/v4l2-common.h>
+
+static int i2c_scan;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+#define I2C_WAIT_DELAY 25
+#define I2C_WAIT_RETRY 1000
+
+static inline int i2c_slave_did_read_ack(struct i2c_adapter *i2c_adap)
+{
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	return au0828_read(dev, AU0828_I2C_STATUS_201) &
+		AU0828_I2C_STATUS_NO_READ_ACK ? 0 : 1;
+}
+
+static int i2c_wait_read_ack(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_slave_did_read_ack(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static inline int i2c_is_read_busy(struct i2c_adapter *i2c_adap)
+{
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	return au0828_read(dev, AU0828_I2C_STATUS_201) &
+		AU0828_I2C_STATUS_READ_DONE ? 0 : 1;
+}
+
+static int i2c_wait_read_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_is_read_busy(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static inline int i2c_is_write_done(struct i2c_adapter *i2c_adap)
+{
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	return au0828_read(dev, AU0828_I2C_STATUS_201) &
+		AU0828_I2C_STATUS_WRITE_DONE ? 1 : 0;
+}
+
+static int i2c_wait_write_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (i2c_is_write_done(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
+{
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	return au0828_read(dev, AU0828_I2C_STATUS_201) &
+		AU0828_I2C_STATUS_BUSY ? 1 : 0;
+}
+
+static int i2c_wait_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_is_busy(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+/* FIXME: Implement join handling correctly */
+static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
+	const struct i2c_msg *msg, int joined_rlen)
+{
+	int i, strobe = 0;
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	u8 i2c_speed = dev->board.i2c_clk_divider;
+
+	dprintk(4, "%s()\n", __func__);
+
+	au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01);
+
+	if (((dev->board.tuner_type == TUNER_XC5000) ||
+	     (dev->board.tuner_type == TUNER_XC5000C)) &&
+	    (dev->board.tuner_addr == msg->addr)) {
+		/*
+		 * Due to I2C clock stretch, we need to use a lower speed
+		 * on xc5000 for commands. However, firmware transfer can
+		 * speed up to 400 KHz.
+		 */
+		if (msg->len == 64)
+			i2c_speed = AU0828_I2C_CLK_250KHZ;
+		else
+			i2c_speed = AU0828_I2C_CLK_20KHZ;
+	}
+	/* Set the I2C clock */
+	au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed);
+
+	/* Hardware needs 8 bit addresses */
+	au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1);
+
+	dprintk(4, "SEND: %02x\n", msg->addr);
+
+	/* Deal with i2c_scan */
+	if (msg->len == 0) {
+		/* The analog tuner detection code makes use of the SMBUS_QUICK
+		   message (which involves a zero length i2c write).  To avoid
+		   checking the status register when we didn't strobe out any
+		   actual bytes to the bus, just do a read check.  This is
+		   consistent with how I saw i2c device checking done in the
+		   USB trace of the Windows driver */
+		au0828_write(dev, AU0828_I2C_TRIGGER_200,
+			     AU0828_I2C_TRIGGER_READ);
+
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+
+		if (i2c_wait_read_ack(i2c_adap))
+			return -EIO;
+
+		return 0;
+	}
+
+	for (i = 0; i < msg->len;) {
+
+		dprintk(4, " %02x\n", msg->buf[i]);
+
+		au0828_write(dev, AU0828_I2C_WRITE_FIFO_205, msg->buf[i]);
+
+		strobe++;
+		i++;
+
+		if ((strobe >= 4) || (i >= msg->len)) {
+
+			/* Strobe the byte into the bus */
+			if (i < msg->len)
+				au0828_write(dev, AU0828_I2C_TRIGGER_200,
+					     AU0828_I2C_TRIGGER_WRITE |
+					     AU0828_I2C_TRIGGER_HOLD);
+			else
+				au0828_write(dev, AU0828_I2C_TRIGGER_200,
+					     AU0828_I2C_TRIGGER_WRITE);
+
+			/* Reset strobe trigger */
+			strobe = 0;
+
+			if (!i2c_wait_write_done(i2c_adap))
+				return -EIO;
+
+		}
+
+	}
+	if (!i2c_wait_done(i2c_adap))
+		return -EIO;
+
+	dprintk(4, "\n");
+
+	return msg->len;
+}
+
+/* FIXME: Implement join handling correctly */
+static int i2c_readbytes(struct i2c_adapter *i2c_adap,
+	const struct i2c_msg *msg, int joined)
+{
+	struct au0828_dev *dev = i2c_adap->algo_data;
+	u8 i2c_speed = dev->board.i2c_clk_divider;
+	int i;
+
+	dprintk(4, "%s()\n", __func__);
+
+	au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01);
+
+	/*
+	 * Due to xc5000c clock stretch, we cannot use full speed at
+	 * readings from xc5000, as otherwise they'll fail.
+	 */
+	if (((dev->board.tuner_type == TUNER_XC5000) ||
+	     (dev->board.tuner_type == TUNER_XC5000C)) &&
+	    (dev->board.tuner_addr == msg->addr))
+		i2c_speed = AU0828_I2C_CLK_20KHZ;
+
+	/* Set the I2C clock */
+	au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed);
+
+	/* Hardware needs 8 bit addresses */
+	au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1);
+
+	dprintk(4, " RECV:\n");
+
+	/* Deal with i2c_scan */
+	if (msg->len == 0) {
+		au0828_write(dev, AU0828_I2C_TRIGGER_200,
+			     AU0828_I2C_TRIGGER_READ);
+
+		if (i2c_wait_read_ack(i2c_adap))
+			return -EIO;
+		return 0;
+	}
+
+	for (i = 0; i < msg->len;) {
+
+		i++;
+
+		if (i < msg->len)
+			au0828_write(dev, AU0828_I2C_TRIGGER_200,
+				     AU0828_I2C_TRIGGER_READ |
+				     AU0828_I2C_TRIGGER_HOLD);
+		else
+			au0828_write(dev, AU0828_I2C_TRIGGER_200,
+				     AU0828_I2C_TRIGGER_READ);
+
+		if (!i2c_wait_read_done(i2c_adap))
+			return -EIO;
+
+		msg->buf[i-1] = au0828_read(dev, AU0828_I2C_READ_FIFO_209) &
+			0xff;
+
+		dprintk(4, " %02x\n", msg->buf[i-1]);
+	}
+	if (!i2c_wait_done(i2c_adap))
+		return -EIO;
+
+	dprintk(4, "\n");
+
+	return msg->len;
+}
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs, int num)
+{
+	int i, retval = 0;
+
+	dprintk(4, "%s(num = %d)\n", __func__, num);
+
+	for (i = 0; i < num; i++) {
+		dprintk(4, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+			__func__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read */
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 0);
+		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* write then read from same address */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i],
+					       msgs[i + 1].len);
+			if (retval < 0)
+				goto err;
+			i++;
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 1);
+		} else {
+			/* write */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i], 0);
+		}
+		if (retval < 0)
+			goto err;
+	}
+	return num;
+
+err:
+	return retval;
+}
+
+static u32 au0828_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm au0828_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.functionality	= au0828_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_adapter au0828_i2c_adap_template = {
+	.name              = KBUILD_MODNAME,
+	.owner             = THIS_MODULE,
+	.algo              = &au0828_i2c_algo_template,
+};
+
+static const struct i2c_client au0828_i2c_client_template = {
+	.name	= "au0828 internal",
+};
+
+static char *i2c_devs[128] = {
+	[0x8e >> 1] = "au8522",
+	[0xa0 >> 1] = "eeprom",
+	[0xc2 >> 1] = "tuner/xc5000",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i, rc;
+
+	for (i = 0; i < 128; i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c, &buf, 0);
+		if (rc < 0)
+			continue;
+		pr_info("%s: i2c scan: found device @ 0x%x  [%s]\n",
+		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+/* init + register i2c adapter */
+int au0828_i2c_register(struct au0828_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	dev->i2c_adap = au0828_i2c_adap_template;
+	dev->i2c_algo = au0828_i2c_algo_template;
+	dev->i2c_client = au0828_i2c_client_template;
+
+	dev->i2c_adap.dev.parent = &dev->usbdev->dev;
+
+	strscpy(dev->i2c_adap.name, KBUILD_MODNAME,
+		sizeof(dev->i2c_adap.name));
+
+	dev->i2c_adap.algo = &dev->i2c_algo;
+	dev->i2c_adap.algo_data = dev;
+#ifdef CONFIG_VIDEO_AU0828_V4L2
+	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+#else
+	i2c_set_adapdata(&dev->i2c_adap, dev);
+#endif
+	i2c_add_adapter(&dev->i2c_adap);
+
+	dev->i2c_client.adapter = &dev->i2c_adap;
+
+	if (0 == dev->i2c_rc) {
+		pr_info("i2c bus registered\n");
+		if (i2c_scan)
+			do_i2c_scan(KBUILD_MODNAME, &dev->i2c_client);
+	} else
+		pr_info("i2c bus register FAILED\n");
+
+	return dev->i2c_rc;
+}
+
+int au0828_i2c_unregister(struct au0828_dev *dev)
+{
+	i2c_del_adapter(&dev->i2c_adap);
+	return 0;
+}
+