Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1556 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c
new file mode 100644
index 0000000000..4014f7d073
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/af9015.c
@@ -0,0 +1,1556 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * Thanks to Afatech who kindly provided information.
+ */
+
+#include "af9015.h"
+
+static int dvb_usb_af9015_remote;
+module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
+MODULE_PARM_DESC(remote, "select remote");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
+{
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret, wlen, rlen;
+	u8 write = 1;
+
+	mutex_lock(&d->usb_mutex);
+
+	state->buf[0] = req->cmd;
+	state->buf[1] = state->seq++;
+	state->buf[2] = req->i2c_addr << 1;
+	state->buf[3] = req->addr >> 8;
+	state->buf[4] = req->addr & 0xff;
+	state->buf[5] = req->mbox;
+	state->buf[6] = req->addr_len;
+	state->buf[7] = req->data_len;
+
+	switch (req->cmd) {
+	case GET_CONFIG:
+	case READ_MEMORY:
+	case RECONNECT_USB:
+		write = 0;
+		break;
+	case READ_I2C:
+		write = 0;
+		state->buf[2] |= 0x01; /* set I2C direction */
+		fallthrough;
+	case WRITE_I2C:
+		state->buf[0] = READ_WRITE_I2C;
+		break;
+	case WRITE_MEMORY:
+		if (((req->addr & 0xff00) == 0xff00) ||
+		    ((req->addr & 0xff00) == 0xae00))
+			state->buf[0] = WRITE_VIRTUAL_MEMORY;
+		break;
+	case WRITE_VIRTUAL_MEMORY:
+	case COPY_FIRMWARE:
+	case DOWNLOAD_FIRMWARE:
+	case BOOT:
+		break;
+	default:
+		dev_err(&intf->dev, "unknown cmd %d\n", req->cmd);
+		ret = -EIO;
+		goto error;
+	}
+
+	/* Buffer overflow check */
+	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+	    (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+		dev_err(&intf->dev, "too much data, cmd %u, len %u\n",
+			req->cmd, req->data_len);
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/*
+	 * Write receives seq + status = 2 bytes
+	 * Read receives seq + status + data = 2 + N bytes
+	 */
+	wlen = REQ_HDR_LEN;
+	rlen = ACK_HDR_LEN;
+	if (write) {
+		wlen += req->data_len;
+		memcpy(&state->buf[REQ_HDR_LEN], req->data, req->data_len);
+	} else {
+		rlen += req->data_len;
+	}
+
+	/* no ack for these packets */
+	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
+		rlen = 0;
+
+	ret = dvb_usbv2_generic_rw_locked(d, state->buf, wlen,
+					  state->buf, rlen);
+	if (ret)
+		goto error;
+
+	/* check status */
+	if (rlen && state->buf[1]) {
+		dev_err(&intf->dev, "cmd failed %u\n", state->buf[1]);
+		ret = -EIO;
+		goto error;
+	}
+
+	/* read request, copy returned data to return buf */
+	if (!write)
+		memcpy(req->data, &state->buf[ACK_HDR_LEN], req->data_len);
+error:
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
+				u8 val)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
+
+	if (addr == state->af9013_i2c_addr[0] ||
+	    addr == state->af9013_i2c_addr[1])
+		req.addr_len = 3;
+
+	return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
+			       u8 *val)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
+
+	if (addr == state->af9013_i2c_addr[0] ||
+	    addr == state->af9013_i2c_addr[1])
+		req.addr_len = 3;
+
+	return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			   int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u16 addr;
+	u8 mbox, addr_len;
+	struct req_t req;
+
+	/*
+	 * I2C multiplexing:
+	 * There could be two tuners, both using same I2C address. Demodulator
+	 * I2C-gate is only possibility to select correct tuner.
+	 *
+	 * ...........................................
+	 * . AF9015 integrates AF9013 demodulator    .
+	 * . ____________               ____________ .             ____________
+	 * .|   USB IF   |             |   demod    |.            |   tuner    |
+	 * .|------------|             |------------|.            |------------|
+	 * .|   AF9015   |             |   AF9013   |.            |   MXL5003  |
+	 * .|            |--+--I2C-----|-----/ -----|.----I2C-----|            |
+	 * .|            |  |          | addr 0x1c  |.            |  addr 0x63 |
+	 * .|____________|  |          |____________|.            |____________|
+	 * .................|.........................
+	 *                  |           ____________               ____________
+	 *                  |          |   demod    |             |   tuner    |
+	 *                  |          |------------|             |------------|
+	 *                  |          |   AF9013   |             |   MXL5003  |
+	 *                  +--I2C-----|-----/ -----|-----I2C-----|            |
+	 *                             | addr 0x1d  |             |  addr 0x63 |
+	 *                             |____________|             |____________|
+	 */
+
+	if (msg[0].len == 0 || msg[0].flags & I2C_M_RD) {
+		addr = 0x0000;
+		mbox = 0;
+		addr_len = 0;
+	} else if (msg[0].len == 1) {
+		addr = msg[0].buf[0];
+		mbox = 0;
+		addr_len = 1;
+	} else if (msg[0].len == 2) {
+		addr = msg[0].buf[0] << 8 | msg[0].buf[1] << 0;
+		mbox = 0;
+		addr_len = 2;
+	} else {
+		addr = msg[0].buf[0] << 8 | msg[0].buf[1] << 0;
+		mbox = msg[0].buf[2];
+		addr_len = 3;
+	}
+
+	if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		/* i2c write */
+		if (msg[0].len > 21) {
+			ret = -EOPNOTSUPP;
+			goto err;
+		}
+		if (msg[0].addr == state->af9013_i2c_addr[0])
+			req.cmd = WRITE_MEMORY;
+		else
+			req.cmd = WRITE_I2C;
+		req.i2c_addr = msg[0].addr;
+		req.addr = addr;
+		req.mbox = mbox;
+		req.addr_len = addr_len;
+		req.data_len = msg[0].len - addr_len;
+		req.data = &msg[0].buf[addr_len];
+		ret = af9015_ctrl_msg(d, &req);
+	} else if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+		   (msg[1].flags & I2C_M_RD)) {
+		/* i2c write + read */
+		if (msg[0].len > 3 || msg[1].len > 61) {
+			ret = -EOPNOTSUPP;
+			goto err;
+		}
+		if (msg[0].addr == state->af9013_i2c_addr[0])
+			req.cmd = READ_MEMORY;
+		else
+			req.cmd = READ_I2C;
+		req.i2c_addr = msg[0].addr;
+		req.addr = addr;
+		req.mbox = mbox;
+		req.addr_len = addr_len;
+		req.data_len = msg[1].len;
+		req.data = &msg[1].buf[0];
+		ret = af9015_ctrl_msg(d, &req);
+	} else if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+		/* i2c read */
+		if (msg[0].len > 61) {
+			ret = -EOPNOTSUPP;
+			goto err;
+		}
+		if (msg[0].addr == state->af9013_i2c_addr[0]) {
+			ret = -EINVAL;
+			goto err;
+		}
+		req.cmd = READ_I2C;
+		req.i2c_addr = msg[0].addr;
+		req.addr = addr;
+		req.mbox = mbox;
+		req.addr_len = addr_len;
+		req.data_len = msg[0].len;
+		req.data = &msg[0].buf[0];
+		ret = af9015_ctrl_msg(d, &req);
+	} else {
+		ret = -EOPNOTSUPP;
+		dev_dbg(&intf->dev, "unknown msg, num %u\n", num);
+	}
+	if (ret)
+		goto err;
+
+	return num;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static u32 af9015_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm af9015_i2c_algo = {
+	.master_xfer = af9015_i2c_xfer,
+	.functionality = af9015_i2c_func,
+};
+
+static int af9015_identify_state(struct dvb_usb_device *d, const char **name)
+{
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u8 reply;
+	struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
+
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret)
+		return ret;
+
+	dev_dbg(&intf->dev, "reply %02x\n", reply);
+
+	if (reply == 0x02)
+		ret = WARM;
+	else
+		ret = COLD;
+
+	return ret;
+}
+
+static int af9015_download_firmware(struct dvb_usb_device *d,
+				    const struct firmware *firmware)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret, i, rem;
+	struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
+	u16 checksum;
+
+	dev_dbg(&intf->dev, "\n");
+
+	/* Calc checksum, we need it when copy firmware to slave demod */
+	for (i = 0, checksum = 0; i < firmware->size; i++)
+		checksum += firmware->data[i];
+
+	state->firmware_size = firmware->size;
+	state->firmware_checksum = checksum;
+
+	#define LEN_MAX (BUF_LEN - REQ_HDR_LEN) /* Max payload size */
+	for (rem = firmware->size; rem > 0; rem -= LEN_MAX) {
+		req.data_len = min(LEN_MAX, rem);
+		req.data = (u8 *)&firmware->data[firmware->size - rem];
+		req.addr = 0x5100 + firmware->size - rem;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret) {
+			dev_err(&intf->dev, "firmware download failed %d\n",
+				ret);
+			goto err;
+		}
+	}
+
+	req.cmd = BOOT;
+	req.data_len = 0;
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret) {
+		dev_err(&intf->dev, "firmware boot failed %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+#define AF9015_EEPROM_SIZE 256
+/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
+#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
+
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret, i;
+	u8 buf[AF9015_EEPROM_SIZE];
+	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL};
+
+	/* read eeprom */
+	for (i = 0; i < AF9015_EEPROM_SIZE; i++) {
+		req.addr = i;
+		req.data = &buf[i];
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret < 0)
+			goto err;
+	}
+
+	/* calculate checksum */
+	for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) {
+		state->eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+		state->eeprom_sum += le32_to_cpu(((__le32 *)buf)[i]);
+	}
+
+	for (i = 0; i < AF9015_EEPROM_SIZE; i += 16)
+		dev_dbg(&intf->dev, "%*ph\n", 16, buf + i);
+
+	dev_dbg(&intf->dev, "eeprom sum %.8x\n", state->eeprom_sum);
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_read_config(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u8 val, i, offset = 0;
+	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+
+	dev_dbg(&intf->dev, "\n");
+
+	/* IR remote controller */
+	req.addr = AF9015_EEPROM_IR_MODE;
+	/* first message will timeout often due to possible hw bug */
+	for (i = 0; i < 4; i++) {
+		ret = af9015_ctrl_msg(d, &req);
+		if (!ret)
+			break;
+	}
+	if (ret)
+		goto error;
+
+	ret = af9015_eeprom_hash(d);
+	if (ret)
+		goto error;
+
+	state->ir_mode = val;
+	dev_dbg(&intf->dev, "ir mode %02x\n", val);
+
+	/* TS mode - one or two receivers */
+	req.addr = AF9015_EEPROM_TS_MODE;
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
+
+	state->dual_mode = val;
+	dev_dbg(&intf->dev, "ts mode %02x\n", state->dual_mode);
+
+	state->af9013_i2c_addr[0] = AF9015_I2C_DEMOD;
+
+	if (state->dual_mode) {
+		/* read 2nd demodulator I2C address */
+		req.addr = AF9015_EEPROM_DEMOD2_I2C;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+
+		state->af9013_i2c_addr[1] = val >> 1;
+	}
+
+	for (i = 0; i < state->dual_mode + 1; i++) {
+		if (i == 1)
+			offset = AF9015_EEPROM_OFFSET;
+		/* xtal */
+		req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+		switch (val) {
+		case 0:
+			state->af9013_pdata[i].clk = 28800000;
+			break;
+		case 1:
+			state->af9013_pdata[i].clk = 20480000;
+			break;
+		case 2:
+			state->af9013_pdata[i].clk = 28000000;
+			break;
+		case 3:
+			state->af9013_pdata[i].clk = 25000000;
+			break;
+		}
+		dev_dbg(&intf->dev, "[%d] xtal %02x, clk %u\n",
+			i, val, state->af9013_pdata[i].clk);
+
+		/* IF frequency */
+		req.addr = AF9015_EEPROM_IF1H + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+
+		state->af9013_pdata[i].if_frequency = val << 8;
+
+		req.addr = AF9015_EEPROM_IF1L + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+
+		state->af9013_pdata[i].if_frequency += val;
+		state->af9013_pdata[i].if_frequency *= 1000;
+		dev_dbg(&intf->dev, "[%d] if frequency %u\n",
+			i, state->af9013_pdata[i].if_frequency);
+
+		/* MT2060 IF1 */
+		req.addr = AF9015_EEPROM_MT2060_IF1H  + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+		state->mt2060_if1[i] = val << 8;
+		req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+		state->mt2060_if1[i] += val;
+		dev_dbg(&intf->dev, "[%d] MT2060 IF1 %u\n",
+			i, state->mt2060_if1[i]);
+
+		/* tuner */
+		req.addr =  AF9015_EEPROM_TUNER_ID1 + offset;
+		ret = af9015_ctrl_msg(d, &req);
+		if (ret)
+			goto error;
+		switch (val) {
+		case AF9013_TUNER_ENV77H11D5:
+		case AF9013_TUNER_MT2060:
+		case AF9013_TUNER_QT1010:
+		case AF9013_TUNER_UNKNOWN:
+		case AF9013_TUNER_MT2060_2:
+		case AF9013_TUNER_TDA18271:
+		case AF9013_TUNER_QT1010A:
+		case AF9013_TUNER_TDA18218:
+			state->af9013_pdata[i].spec_inv = 1;
+			break;
+		case AF9013_TUNER_MXL5003D:
+		case AF9013_TUNER_MXL5005D:
+		case AF9013_TUNER_MXL5005R:
+		case AF9013_TUNER_MXL5007T:
+			state->af9013_pdata[i].spec_inv = 0;
+			break;
+		case AF9013_TUNER_MC44S803:
+			state->af9013_pdata[i].gpio[1] = AF9013_GPIO_LO;
+			state->af9013_pdata[i].spec_inv = 1;
+			break;
+		default:
+			dev_err(&intf->dev,
+				"tuner id %02x not supported, please report!\n",
+				val);
+			return -ENODEV;
+		}
+
+		state->af9013_pdata[i].tuner = val;
+		dev_dbg(&intf->dev, "[%d] tuner id %02x\n", i, val);
+	}
+
+error:
+	if (ret)
+		dev_err(&intf->dev, "eeprom read failed %d\n", ret);
+
+	/*
+	 * AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
+	 * content :-( Override some wrong values here. Ditto for the
+	 * AVerTV Red HD+ (A850T) device.
+	 */
+	if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
+	    ((le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850) ||
+	    (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850T))) {
+		dev_dbg(&intf->dev, "AverMedia A850: overriding config\n");
+		/* disable dual mode */
+		state->dual_mode = 0;
+
+		/* set correct IF */
+		state->af9013_pdata[0].if_frequency = 4570000;
+	}
+
+	return ret;
+}
+
+static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+				    struct usb_data_stream_properties *stream)
+{
+	struct dvb_usb_device *d = fe_to_d(fe);
+	struct usb_interface *intf = d->intf;
+
+	dev_dbg(&intf->dev, "adap %u\n", fe_to_adap(fe)->id);
+
+	if (d->udev->speed == USB_SPEED_FULL)
+		stream->u.bulk.buffersize = 5 * 188;
+
+	return 0;
+}
+
+static int af9015_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_device *d = fe_to_d(fe);
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+	unsigned int utmp1, utmp2, reg1, reg2;
+	u8 buf[2];
+	const unsigned int adap_id = fe_to_adap(fe)->id;
+
+	dev_dbg(&intf->dev, "adap id %d, onoff %d\n", adap_id, onoff);
+
+	if (!state->usb_ts_if_configured[adap_id]) {
+		dev_dbg(&intf->dev, "set usb and ts interface\n");
+
+		/* USB IF stream settings */
+		utmp1 = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4;
+		utmp2 = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
+
+		buf[0] = (utmp1 >> 0) & 0xff;
+		buf[1] = (utmp1 >> 8) & 0xff;
+		if (adap_id == 0) {
+			/* 1st USB IF (EP4) stream settings */
+			reg1 = 0xdd88;
+			reg2 = 0xdd0c;
+		} else {
+			/* 2nd USB IF (EP5) stream settings */
+			reg1 = 0xdd8a;
+			reg2 = 0xdd0d;
+		}
+		ret = regmap_bulk_write(state->regmap, reg1, buf, 2);
+		if (ret)
+			goto err;
+		ret = regmap_write(state->regmap, reg2, utmp2);
+		if (ret)
+			goto err;
+
+		/* TS IF settings */
+		if (state->dual_mode) {
+			utmp1 = 0x01;
+			utmp2 = 0x10;
+		} else {
+			utmp1 = 0x00;
+			utmp2 = 0x00;
+		}
+		ret = regmap_update_bits(state->regmap, 0xd50b, 0x01, utmp1);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xd520, 0x10, utmp2);
+		if (ret)
+			goto err;
+
+		state->usb_ts_if_configured[adap_id] = true;
+	}
+
+	if (adap_id == 0 && onoff) {
+		/* Adapter 0 stream on. EP4: clear NAK, enable, clear reset */
+		ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x00);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x20);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x00);
+		if (ret)
+			goto err;
+	} else if (adap_id == 1 && onoff) {
+		/* Adapter 1 stream on. EP5: clear NAK, enable, clear reset */
+		ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x00);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x40);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x00);
+		if (ret)
+			goto err;
+	} else if (adap_id == 0 && !onoff) {
+		/* Adapter 0 stream off. EP4: set reset, disable, set NAK */
+		ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x04);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x00);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x20);
+		if (ret)
+			goto err;
+	} else if (adap_id == 1 && !onoff) {
+		/* Adapter 1 stream off. EP5: set reset, disable, set NAK */
+		ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x02);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x00);
+		if (ret)
+			goto err;
+		ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x40);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_get_adapter_count(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+
+	return state->dual_mode + 1;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->set_frontend[fe_to_adap(fe)->id](fe);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_read_status(struct dvb_frontend *fe,
+				     enum fe_status *status)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->read_status[fe_to_adap(fe)->id](fe, status);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_init(struct dvb_frontend *fe)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->init[fe_to_adap(fe)->id](fe);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_sleep(struct dvb_frontend *fe)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->sleep[fe_to_adap(fe)->id](fe);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_init(struct dvb_frontend *fe)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->tuner_init[fe_to_adap(fe)->id](fe);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_sleep(struct dvb_frontend *fe)
+{
+	int ret;
+	struct af9015_state *state = fe_to_priv(fe);
+
+	if (mutex_lock_interruptible(&state->fe_mutex))
+		return -EAGAIN;
+
+	ret = state->tuner_sleep[fe_to_adap(fe)->id](fe);
+
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+static int af9015_copy_firmware(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+	unsigned long timeout;
+	u8 val, firmware_info[4];
+	struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, 4, firmware_info};
+
+	dev_dbg(&intf->dev, "\n");
+
+	firmware_info[0] = (state->firmware_size >> 8) & 0xff;
+	firmware_info[1] = (state->firmware_size >> 0) & 0xff;
+	firmware_info[2] = (state->firmware_checksum >> 8) & 0xff;
+	firmware_info[3] = (state->firmware_checksum >> 0) & 0xff;
+
+	/* Check whether firmware is already running */
+	ret = af9015_read_reg_i2c(d, state->af9013_i2c_addr[1], 0x98be, &val);
+	if (ret)
+		goto err;
+
+	dev_dbg(&intf->dev, "firmware status %02x\n", val);
+
+	if (val == 0x0c)
+		return 0;
+
+	/* Set i2c clock to 625kHz to speed up firmware copy */
+	ret = regmap_write(state->regmap, 0xd416, 0x04);
+	if (ret)
+		goto err;
+
+	/* Copy firmware from master demod to slave demod */
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret) {
+		dev_err(&intf->dev, "firmware copy cmd failed %d\n", ret);
+		goto err;
+	}
+
+	/* Set i2c clock to 125kHz */
+	ret = regmap_write(state->regmap, 0xd416, 0x14);
+	if (ret)
+		goto err;
+
+	/* Boot firmware */
+	ret = af9015_write_reg_i2c(d, state->af9013_i2c_addr[1], 0xe205, 0x01);
+	if (ret)
+		goto err;
+
+	/* Poll firmware ready */
+	for (val = 0x00, timeout = jiffies + msecs_to_jiffies(1000);
+	     !time_after(jiffies, timeout) && val != 0x0c && val != 0x04;) {
+		msleep(20);
+
+		/* Check firmware status. 0c=OK, 04=fail */
+		ret = af9015_read_reg_i2c(d, state->af9013_i2c_addr[1],
+					  0x98be, &val);
+		if (ret)
+			goto err;
+
+		dev_dbg(&intf->dev, "firmware status %02x\n", val);
+	}
+
+	dev_dbg(&intf->dev, "firmware boot took %u ms\n",
+		jiffies_to_msecs(jiffies) - (jiffies_to_msecs(timeout) - 1000));
+
+	if (val == 0x04) {
+		ret = -ENODEV;
+		dev_err(&intf->dev, "firmware did not run\n");
+		goto err;
+	} else if (val != 0x0c) {
+		ret = -ETIMEDOUT;
+		dev_err(&intf->dev, "firmware boot timeout\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct af9015_state *state = adap_to_priv(adap);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct usb_interface *intf = d->intf;
+	struct i2c_client *client;
+	int ret;
+
+	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
+
+	if (adap->id == 0) {
+		state->af9013_pdata[0].ts_mode = AF9013_TS_MODE_USB;
+		memcpy(state->af9013_pdata[0].api_version, "\x0\x1\x9\x0", 4);
+		state->af9013_pdata[0].gpio[0] = AF9013_GPIO_HI;
+		state->af9013_pdata[0].gpio[3] = AF9013_GPIO_TUNER_ON;
+	} else if (adap->id == 1) {
+		state->af9013_pdata[1].ts_mode = AF9013_TS_MODE_SERIAL;
+		state->af9013_pdata[1].ts_output_pin = 7;
+		memcpy(state->af9013_pdata[1].api_version, "\x0\x1\x9\x0", 4);
+		state->af9013_pdata[1].gpio[0] = AF9013_GPIO_TUNER_ON;
+		state->af9013_pdata[1].gpio[1] = AF9013_GPIO_LO;
+
+		/* copy firmware to 2nd demodulator */
+		if (state->dual_mode) {
+			/* Wait 2nd demodulator ready */
+			msleep(100);
+
+			ret = af9015_copy_firmware(adap_to_d(adap));
+			if (ret) {
+				dev_err(&intf->dev,
+					"firmware copy to 2nd frontend failed, will disable it\n");
+				state->dual_mode = 0;
+				goto err;
+			}
+		} else {
+			ret = -ENODEV;
+			goto err;
+		}
+	}
+
+	/* Add I2C demod */
+	client = dvb_module_probe("af9013", NULL, &d->i2c_adap,
+				  state->af9013_i2c_addr[adap->id],
+				  &state->af9013_pdata[adap->id]);
+	if (!client) {
+		ret = -ENODEV;
+		goto err;
+	}
+	adap->fe[0] = state->af9013_pdata[adap->id].get_dvb_frontend(client);
+	state->demod_i2c_client[adap->id] = client;
+
+	/*
+	 * AF9015 firmware does not like if it gets interrupted by I2C adapter
+	 * request on some critical phases. During normal operation I2C adapter
+	 * is used only 2nd demodulator and tuner on dual tuner devices.
+	 * Override demodulator callbacks and use mutex for limit access to
+	 * those "critical" paths to keep AF9015 happy.
+	 */
+	if (adap->fe[0]) {
+		state->set_frontend[adap->id] = adap->fe[0]->ops.set_frontend;
+		adap->fe[0]->ops.set_frontend = af9015_af9013_set_frontend;
+		state->read_status[adap->id] = adap->fe[0]->ops.read_status;
+		adap->fe[0]->ops.read_status = af9015_af9013_read_status;
+		state->init[adap->id] = adap->fe[0]->ops.init;
+		adap->fe[0]->ops.init = af9015_af9013_init;
+		state->sleep[adap->id] = adap->fe[0]->ops.sleep;
+		adap->fe[0]->ops.sleep = af9015_af9013_sleep;
+	}
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_frontend_detach(struct dvb_usb_adapter *adap)
+{
+	struct af9015_state *state = adap_to_priv(adap);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct usb_interface *intf = d->intf;
+	struct i2c_client *client;
+
+	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
+
+	/* Remove I2C demod */
+	client = state->demod_i2c_client[adap->id];
+	dvb_module_release(client);
+
+	return 0;
+}
+
+static struct mt2060_config af9015_mt2060_config = {
+	.i2c_address = 0x60,
+	.clock_out = 0,
+};
+
+static struct qt1010_config af9015_qt1010_config = {
+	.i2c_address = 0x62,
+};
+
+static struct tda18271_config af9015_tda18271_config = {
+	.gate = TDA18271_GATE_DIGITAL,
+	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
+};
+
+static struct mxl5005s_config af9015_mxl5003_config = {
+	.i2c_address     = 0x63,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_DEFAULT,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static struct mxl5005s_config af9015_mxl5005_config = {
+	.i2c_address     = 0x63,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_OFF,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static struct mc44s803_config af9015_mc44s803_config = {
+	.i2c_address = 0x60,
+	.dig_out = 1,
+};
+
+static struct tda18218_config af9015_tda18218_config = {
+	.i2c_address = 0x60,
+	.i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
+};
+
+static struct mxl5007t_config af9015_mxl5007t_config = {
+	.xtal_freq_hz = MxL_XTAL_24_MHZ,
+	.if_freq_hz = MxL_IF_4_57_MHZ,
+};
+
+static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	struct i2c_client *client;
+	struct i2c_adapter *adapter;
+	int ret;
+
+	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
+
+	client = state->demod_i2c_client[adap->id];
+	adapter = state->af9013_pdata[adap->id].get_i2c_adapter(client);
+
+	switch (state->af9013_pdata[adap->id].tuner) {
+	case AF9013_TUNER_MT2060:
+	case AF9013_TUNER_MT2060_2:
+		ret = dvb_attach(mt2060_attach, adap->fe[0], adapter,
+				 &af9015_mt2060_config,
+				 state->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_QT1010:
+	case AF9013_TUNER_QT1010A:
+		ret = dvb_attach(qt1010_attach, adap->fe[0], adapter,
+				 &af9015_qt1010_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_TDA18271:
+		ret = dvb_attach(tda18271_attach, adap->fe[0], 0x60, adapter,
+				 &af9015_tda18271_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_TDA18218:
+		ret = dvb_attach(tda18218_attach, adap->fe[0], adapter,
+				 &af9015_tda18218_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_MXL5003D:
+		ret = dvb_attach(mxl5005s_attach, adap->fe[0], adapter,
+				 &af9015_mxl5003_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_MXL5005D:
+	case AF9013_TUNER_MXL5005R:
+		ret = dvb_attach(mxl5005s_attach, adap->fe[0], adapter,
+				 &af9015_mxl5005_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_ENV77H11D5:
+		ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0x60, adapter,
+				 DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_MC44S803:
+		ret = dvb_attach(mc44s803_attach, adap->fe[0], adapter,
+				 &af9015_mc44s803_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_MXL5007T:
+		ret = dvb_attach(mxl5007t_attach, adap->fe[0], adapter,
+				 0x60, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
+		break;
+	case AF9013_TUNER_UNKNOWN:
+	default:
+		dev_err(&intf->dev, "unknown tuner, tuner id %02x\n",
+			state->af9013_pdata[adap->id].tuner);
+		ret = -ENODEV;
+	}
+
+	if (adap->fe[0]->ops.tuner_ops.init) {
+		state->tuner_init[adap->id] =
+			adap->fe[0]->ops.tuner_ops.init;
+		adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init;
+	}
+
+	if (adap->fe[0]->ops.tuner_ops.sleep) {
+		state->tuner_sleep[adap->id] =
+			adap->fe[0]->ops.tuner_ops.sleep;
+		adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep;
+	}
+
+	return ret;
+}
+
+static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct af9015_state *state = adap_to_priv(adap);
+	struct af9013_platform_data *pdata = &state->af9013_pdata[adap->id];
+	int ret;
+
+	mutex_lock(&state->fe_mutex);
+	ret = pdata->pid_filter_ctrl(adap->fe[0], onoff);
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index,
+			     u16 pid, int onoff)
+{
+	struct af9015_state *state = adap_to_priv(adap);
+	struct af9013_platform_data *pdata = &state->af9013_pdata[adap->id];
+	int ret;
+
+	mutex_lock(&state->fe_mutex);
+	ret = pdata->pid_filter(adap->fe[0], index, pid, onoff);
+	mutex_unlock(&state->fe_mutex);
+
+	return ret;
+}
+
+static int af9015_init(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+
+	dev_dbg(&intf->dev, "\n");
+
+	mutex_init(&state->fe_mutex);
+
+	/* init RC canary */
+	ret = regmap_write(state->regmap, 0x98e9, 0xff);
+	if (ret)
+		goto error;
+
+error:
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+struct af9015_rc_setup {
+	unsigned int id;
+	char *rc_codes;
+};
+
+static char *af9015_rc_setup_match(unsigned int id,
+				   const struct af9015_rc_setup *table)
+{
+	for (; table->rc_codes; table++)
+		if (table->id == id)
+			return table->rc_codes;
+	return NULL;
+}
+
+static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
+	{ AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
+	{ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
+	{ AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
+	{ AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
+	{ AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
+	{ }
+};
+
+static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
+	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
+	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
+	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
+	{ }
+};
+
+static int af9015_rc_query(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u8 buf[17];
+
+	/* read registers needed to detect remote controller code */
+	ret = regmap_bulk_read(state->regmap, 0x98d9, buf, sizeof(buf));
+	if (ret)
+		goto error;
+
+	/* If any of these are non-zero, assume invalid data */
+	if (buf[1] || buf[2] || buf[3]) {
+		dev_dbg(&intf->dev, "invalid data\n");
+		return 0;
+	}
+
+	/* Check for repeat of previous code */
+	if ((state->rc_repeat != buf[6] || buf[0]) &&
+	    !memcmp(&buf[12], state->rc_last, 4)) {
+		dev_dbg(&intf->dev, "key repeated\n");
+		rc_repeat(d->rc_dev);
+		state->rc_repeat = buf[6];
+		return 0;
+	}
+
+	/* Only process key if canary killed */
+	if (buf[16] != 0xff && buf[0] != 0x01) {
+		enum rc_proto proto;
+
+		dev_dbg(&intf->dev, "key pressed %*ph\n", 4, buf + 12);
+
+		/* Reset the canary */
+		ret = regmap_write(state->regmap, 0x98e9, 0xff);
+		if (ret)
+			goto error;
+
+		/* Remember this key */
+		memcpy(state->rc_last, &buf[12], 4);
+		if (buf[14] == (u8)~buf[15]) {
+			if (buf[12] == (u8)~buf[13]) {
+				/* NEC */
+				state->rc_keycode = RC_SCANCODE_NEC(buf[12],
+								    buf[14]);
+				proto = RC_PROTO_NEC;
+			} else {
+				/* NEC extended*/
+				state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
+								     buf[13],
+								     buf[14]);
+				proto = RC_PROTO_NECX;
+			}
+		} else {
+			/* 32 bit NEC */
+			state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
+							      buf[13] << 16 |
+							      buf[14] << 8  |
+							      buf[15]);
+			proto = RC_PROTO_NEC32;
+		}
+		rc_keydown(d->rc_dev, proto, state->rc_keycode, 0);
+	} else {
+		dev_dbg(&intf->dev, "no key press\n");
+		/* Invalidate last keypress */
+		/* Not really needed, but helps with debug */
+		state->rc_last[2] = state->rc_last[3];
+	}
+
+	state->rc_repeat = buf[6];
+	state->rc_failed = false;
+
+error:
+	if (ret) {
+		dev_warn(&intf->dev, "rc query failed %d\n", ret);
+
+		/* allow random errors as dvb-usb will stop polling on error */
+		if (!state->rc_failed)
+			ret = 0;
+
+		state->rc_failed = true;
+	}
+
+	return ret;
+}
+
+static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+	struct af9015_state *state = d_to_priv(d);
+	u16 vid = le16_to_cpu(d->udev->descriptor.idVendor);
+
+	if (state->ir_mode == AF9015_IR_MODE_DISABLED)
+		return 0;
+
+	/* try to load remote based module param */
+	if (!rc->map_name)
+		rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote,
+						     af9015_rc_setup_modparam);
+
+	/* try to load remote based eeprom hash */
+	if (!rc->map_name)
+		rc->map_name = af9015_rc_setup_match(state->eeprom_sum,
+						     af9015_rc_setup_hashes);
+
+	/* try to load remote based USB iManufacturer string */
+	if (!rc->map_name && vid == USB_VID_AFATECH) {
+		/*
+		 * Check USB manufacturer and product strings and try
+		 * to determine correct remote in case of chip vendor
+		 * reference IDs are used.
+		 * DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
+		 */
+		char manufacturer[10];
+
+		memset(manufacturer, 0, sizeof(manufacturer));
+		usb_string(d->udev, d->udev->descriptor.iManufacturer,
+			   manufacturer, sizeof(manufacturer));
+		if (!strcmp("MSI", manufacturer)) {
+			/*
+			 * iManufacturer 1 MSI
+			 * iProduct      2 MSI K-VOX
+			 */
+			rc->map_name = af9015_rc_setup_match(AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+							     af9015_rc_setup_modparam);
+		}
+	}
+
+	/* load empty to enable rc */
+	if (!rc->map_name)
+		rc->map_name = RC_MAP_EMPTY;
+
+	rc->allowed_protos = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX |
+						RC_PROTO_BIT_NEC32;
+	rc->query = af9015_rc_query;
+	rc->interval = 500;
+
+	return 0;
+}
+#else
+	#define af9015_get_rc_config NULL
+#endif
+
+static int af9015_regmap_write(void *context, const void *data, size_t count)
+{
+	struct dvb_usb_device *d = context;
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u16 reg = ((u8 *)data)[0] << 8 | ((u8 *)data)[1] << 0;
+	u8 *val = &((u8 *)data)[2];
+	const unsigned int len = count - 2;
+	struct req_t req = {WRITE_MEMORY, 0, reg, 0, 0, len, val};
+
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_regmap_read(void *context, const void *reg_buf,
+			      size_t reg_size, void *val_buf, size_t val_size)
+{
+	struct dvb_usb_device *d = context;
+	struct usb_interface *intf = d->intf;
+	int ret;
+	u16 reg = ((u8 *)reg_buf)[0] << 8 | ((u8 *)reg_buf)[1] << 0;
+	u8 *val = &((u8 *)val_buf)[0];
+	const unsigned int len = val_size;
+	struct req_t req = {READ_MEMORY, 0, reg, 0, 0, len, val};
+
+	ret = af9015_ctrl_msg(d, &req);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9015_probe(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int ret;
+	char manufacturer[sizeof("ITE Technologies, Inc.")];
+	static const struct regmap_config regmap_config = {
+		.reg_bits    =  16,
+		.val_bits    =  8,
+	};
+	static const struct regmap_bus regmap_bus = {
+		.read = af9015_regmap_read,
+		.write = af9015_regmap_write,
+	};
+
+	dev_dbg(&intf->dev, "\n");
+
+	memset(manufacturer, 0, sizeof(manufacturer));
+	usb_string(udev, udev->descriptor.iManufacturer,
+		   manufacturer, sizeof(manufacturer));
+	/*
+	 * There is two devices having same ID but different chipset. One uses
+	 * AF9015 and the other IT9135 chipset. Only difference seen on lsusb
+	 * is iManufacturer string.
+	 *
+	 * idVendor           0x0ccd TerraTec Electronic GmbH
+	 * idProduct          0x0099
+	 * bcdDevice            2.00
+	 * iManufacturer           1 Afatech
+	 * iProduct                2 DVB-T 2
+	 *
+	 * idVendor           0x0ccd TerraTec Electronic GmbH
+	 * idProduct          0x0099
+	 * bcdDevice            2.00
+	 * iManufacturer           1 ITE Technologies, Inc.
+	 * iProduct                2 DVB-T TV Stick
+	 */
+	if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
+	    (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
+		if (!strcmp("ITE Technologies, Inc.", manufacturer)) {
+			ret = -ENODEV;
+			dev_dbg(&intf->dev, "rejecting device\n");
+			goto err;
+		}
+	}
+
+	state->regmap = regmap_init(&intf->dev, &regmap_bus, d, &regmap_config);
+	if (IS_ERR(state->regmap)) {
+		ret = PTR_ERR(state->regmap);
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&intf->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static void af9015_disconnect(struct dvb_usb_device *d)
+{
+	struct af9015_state *state = d_to_priv(d);
+	struct usb_interface *intf = d->intf;
+
+	dev_dbg(&intf->dev, "\n");
+
+	regmap_exit(state->regmap);
+}
+
+/*
+ * Interface 0 is used by DVB-T receiver and
+ * interface 1 is for remote controller (HID)
+ */
+static const struct dvb_usb_device_properties af9015_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct af9015_state),
+
+	.generic_bulk_ctrl_endpoint = 0x02,
+	.generic_bulk_ctrl_endpoint_response = 0x81,
+
+	.probe = af9015_probe,
+	.disconnect = af9015_disconnect,
+	.identify_state = af9015_identify_state,
+	.firmware = AF9015_FIRMWARE,
+	.download_firmware = af9015_download_firmware,
+
+	.i2c_algo = &af9015_i2c_algo,
+	.read_config = af9015_read_config,
+	.frontend_attach = af9015_af9013_frontend_attach,
+	.frontend_detach = af9015_frontend_detach,
+	.tuner_attach = af9015_tuner_attach,
+	.init = af9015_init,
+	.get_rc_config = af9015_get_rc_config,
+	.get_stream_config = af9015_get_stream_config,
+	.streaming_ctrl = af9015_streaming_ctrl,
+
+	.get_adapter_count = af9015_get_adapter_count,
+	.adapter = {
+		{
+			.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+			.pid_filter_count = 32,
+			.pid_filter = af9015_pid_filter,
+			.pid_filter_ctrl = af9015_pid_filter_ctrl,
+
+			.stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188),
+		}, {
+			.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+			.pid_filter_count = 32,
+			.pid_filter = af9015_pid_filter,
+			.pid_filter_ctrl = af9015_pid_filter_ctrl,
+
+			.stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188),
+		},
+	},
+};
+
+static const struct usb_device_id af9015_id_table[] = {
+	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015,
+		&af9015_props, "Afatech AF9015 reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016,
+		&af9015_props, "Afatech AF9015 reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD,
+		&af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) },
+	{ DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E,
+		&af9015_props, "Pinnacle PCTV 71e", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U,
+		&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN,
+		&af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) },
+	{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700,
+		&af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2,
+		&af9015_props, "TerraTec Cinergy T USB XE", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T,
+		&af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X,
+		&af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) },
+	{ DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380,
+		&af9015_props, "Xtensions XD-380", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO,
+		&af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2,
+		&af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TELESTAR,  USB_PID_TELESTAR_STARSTICK_2,
+		&af9015_props, "Telestar Starstick 2", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309,
+		&af9015_props, "AVerMedia A309", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III,
+		&af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U,
+		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2,
+		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3,
+		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT,
+		&af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850,
+		&af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805,
+		&af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
+		&af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
+		&af9015_props, "KWorld Digital MC-810", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
+		&af9015_props, "Genius TVGo DVB-T03", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,
+		&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T,
+		&af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20,
+		&af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2,
+		&af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS,
+		&af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T,
+		&af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4,
+		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M,
+		&af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC,
+		&af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) },
+	/* XXX: that same ID [0ccd:0099] is used by af9035 driver too */
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+		&af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T,
+		&af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3,
+		&af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22,
+		&af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, af9015_id_table);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver af9015_usb_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = af9015_id_table,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.reset_resume = dvb_usbv2_reset_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(af9015_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Afatech AF9015 driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(AF9015_FIRMWARE);