Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 156 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
new file mode 100644
index 0000000000..1533cf346e
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/af9035.h
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Afatech AF9035 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ */
+
+#ifndef AF9035_H
+#define AF9035_H
+
+#include <linux/platform_device.h>
+#include "dvb_usb.h"
+#include "af9033.h"
+#include "tua9001.h"
+#include "fc0011.h"
+#include "fc0012.h"
+#include "mxl5007t.h"
+#include "tda18218.h"
+#include "fc2580.h"
+#include "it913x.h"
+#include "si2168.h"
+#include "si2157.h"
+
+struct reg_val {
+	u32 reg;
+	u8  val;
+};
+
+struct reg_val_mask {
+	u32 reg;
+	u8  val;
+	u8  mask;
+};
+
+struct usb_req {
+	u8  cmd;
+	u8  mbox;
+	u8  wlen;
+	u8  *wbuf;
+	u8  rlen;
+	u8  *rbuf;
+};
+
+struct state {
+#define BUF_LEN 64
+	u8 buf[BUF_LEN];
+	u8 seq; /* packet sequence number */
+	u8 prechip_version;
+	u8 chip_version;
+	u16 chip_type;
+	u8 eeprom[256];
+	bool no_eeprom;
+	u8 ir_mode;
+	u8 ir_type;
+	u8 dual_mode:1;
+	u8 no_read:1;
+	u8 af9033_i2c_addr[2];
+	u8 it930x_addresses;
+	struct af9033_config af9033_config[2];
+	struct af9033_ops ops;
+	#define AF9035_I2C_CLIENT_MAX 4
+	struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
+	struct i2c_adapter *i2c_adapter_demod;
+	struct platform_device *platform_device_tuner[2];
+};
+
+struct address_table {
+	u8 frontend_i2c_addr;
+	u8 tuner_i2c_addr;
+	u8 tuner_if_port;
+};
+
+static const struct address_table it930x_addresses_table[] = {
+	{ 0x67, 0x63, 1 },
+	{ 0x64, 0x60, 0 },
+};
+
+static const u32 clock_lut_af9035[] = {
+	20480000, /*      FPGA */
+	16384000, /* 16.38 MHz */
+	20480000, /* 20.48 MHz */
+	36000000, /* 36.00 MHz */
+	30000000, /* 30.00 MHz */
+	26000000, /* 26.00 MHz */
+	28000000, /* 28.00 MHz */
+	32000000, /* 32.00 MHz */
+	34000000, /* 34.00 MHz */
+	24000000, /* 24.00 MHz */
+	22000000, /* 22.00 MHz */
+	12000000, /* 12.00 MHz */
+};
+
+static const u32 clock_lut_it9135[] = {
+	12000000, /* 12.00 MHz */
+	20480000, /* 20.48 MHz */
+	36000000, /* 36.00 MHz */
+	30000000, /* 30.00 MHz */
+	26000000, /* 26.00 MHz */
+	28000000, /* 28.00 MHz */
+	32000000, /* 32.00 MHz */
+	34000000, /* 34.00 MHz */
+	24000000, /* 24.00 MHz */
+	22000000, /* 22.00 MHz */
+};
+
+#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
+#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
+#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
+#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
+
+/*
+ * eeprom is memory mapped as read only. Writing that memory mapped address
+ * will not corrupt eeprom.
+ *
+ * TS mode:
+ * 0  TS
+ * 1  DCA + PIP
+ * 3  PIP
+ * 5  DCA + PIP (AF9035 only)
+ * n  DCA
+ *
+ * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
+ */
+
+#define EEPROM_BASE_AF9035        0x42f5
+#define EEPROM_BASE_IT9135        0x4994
+#define EEPROM_SHIFT                0x10
+
+#define EEPROM_IR_MODE              0x18
+#define EEPROM_TS_MODE              0x31
+#define EEPROM_2ND_DEMOD_ADDR       0x32
+#define EEPROM_IR_TYPE              0x34
+#define EEPROM_1_IF_L               0x38
+#define EEPROM_1_IF_H               0x39
+#define EEPROM_1_TUNER_ID           0x3c
+#define EEPROM_2_IF_L               0x48
+#define EEPROM_2_IF_H               0x49
+#define EEPROM_2_TUNER_ID           0x4c
+
+/* USB commands */
+#define CMD_MEM_RD                  0x00
+#define CMD_MEM_WR                  0x01
+#define CMD_I2C_RD                  0x02
+#define CMD_I2C_WR                  0x03
+#define CMD_IR_GET                  0x18
+#define CMD_FW_DL                   0x21
+#define CMD_FW_QUERYINFO            0x22
+#define CMD_FW_BOOT                 0x23
+#define CMD_FW_DL_BEGIN             0x24
+#define CMD_FW_DL_END               0x25
+#define CMD_FW_SCATTER_WR           0x29
+#define CMD_GENERIC_I2C_RD          0x2a
+#define CMD_GENERIC_I2C_WR          0x2b
+
+#endif