Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 78 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dib0700.h b/drivers/media/usb/dvb-usb/dib0700.h
new file mode 100644
index 0000000000..ac06a9ab26
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dib0700.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
+ *
+ *  Copyright (C) 2005-6 DiBcom, SA
+ */
+#ifndef _DIB0700_H_
+#define _DIB0700_H_
+
+#define DVB_USB_LOG_PREFIX "dib0700"
+#include "dvb-usb.h"
+
+#include "dib07x0.h"
+
+extern int dvb_usb_dib0700_debug;
+#define deb_info(args...)   dprintk(dvb_usb_dib0700_debug,0x01,args)
+#define deb_fw(args...)     dprintk(dvb_usb_dib0700_debug,0x02,args)
+#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args)
+#define deb_data(args...)   dprintk(dvb_usb_dib0700_debug,0x08,args)
+
+#define REQUEST_SET_USB_XFER_LEN    0x0 /* valid only for firmware version */
+					/* higher than 1.21 */
+#define REQUEST_I2C_READ            0x2
+#define REQUEST_I2C_WRITE           0x3
+#define REQUEST_POLL_RC             0x4 /* deprecated in firmware v1.20 */
+#define REQUEST_JUMPRAM             0x8
+#define REQUEST_SET_CLOCK           0xB
+#define REQUEST_SET_GPIO            0xC
+#define REQUEST_ENABLE_VIDEO        0xF
+	// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
+	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
+	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
+#define REQUEST_SET_I2C_PARAM       0x10
+#define REQUEST_SET_RC              0x11
+#define REQUEST_NEW_I2C_READ        0x12
+#define REQUEST_NEW_I2C_WRITE       0x13
+#define REQUEST_GET_VERSION         0x15
+
+struct dib0700_state {
+	u8 channel_state;
+	u16 mt2060_if1[2];
+	u8 rc_toggle;
+	u8 rc_counter;
+	u8 is_dib7000pc;
+	u8 fw_use_new_i2c_api;
+	u8 disable_streaming_master_mode;
+	u32 fw_version;
+	u32 nb_packet_buffer_size;
+	int (*read_status)(struct dvb_frontend *, enum fe_status *);
+	int (*sleep)(struct dvb_frontend* fe);
+	u8 buf[255];
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
+};
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+			u32 *romversion, u32 *ramversion, u32 *fwtype);
+int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio,
+		     u8 gpio_dir, u8 gpio_val);
+int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
+int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx,
+		    u8 rxlen);
+int dib0700_download_firmware(struct usb_device *d,
+			      const struct firmware *fw);
+int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf);
+int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+int dib0700_identify_state(struct usb_device *d,
+			   const struct dvb_usb_device_properties *props,
+			   const struct dvb_usb_device_description **desc,
+			   int *cold);
+int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_proto);
+int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
+
+extern struct i2c_algorithm dib0700_i2c_algo;
+extern int dib0700_device_count;
+extern struct dvb_usb_device_properties dib0700_devices[];
+extern struct usb_device_id dib0700_usb_id_table[];
+
+#endif