Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 329 insertions, 0 deletions

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
new file mode 100644
index 0000000000..860f0a6b09
--- /dev/null
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *
+ *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ */
+#ifndef __PVRUSB2_HDW_H
+#define __PVRUSB2_HDW_H
+
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-dev.h>
+#include "pvrusb2-io.h"
+#include "pvrusb2-ctrl.h"
+
+
+/* Private internal control ids, look these up with
+   pvr2_hdw_get_ctrl_by_id() - these are NOT visible in V4L */
+#define PVR2_CID_STDCUR 2
+#define PVR2_CID_STDAVAIL 3
+#define PVR2_CID_INPUT 4
+#define PVR2_CID_AUDIOMODE 5
+#define PVR2_CID_FREQUENCY 6
+#define PVR2_CID_HRES 7
+#define PVR2_CID_VRES 8
+#define PVR2_CID_CROPL 9
+#define PVR2_CID_CROPT 10
+#define PVR2_CID_CROPW 11
+#define PVR2_CID_CROPH 12
+#define PVR2_CID_CROPCAPPAN 13
+#define PVR2_CID_CROPCAPPAD 14
+#define PVR2_CID_CROPCAPBL 15
+#define PVR2_CID_CROPCAPBT 16
+#define PVR2_CID_CROPCAPBW 17
+#define PVR2_CID_CROPCAPBH 18
+#define PVR2_CID_STDDETECT 19
+
+/* Legal values for the INPUT state variable */
+#define PVR2_CVAL_INPUT_TV 0
+#define PVR2_CVAL_INPUT_DTV 1
+#define PVR2_CVAL_INPUT_COMPOSITE 2
+#define PVR2_CVAL_INPUT_SVIDEO 3
+#define PVR2_CVAL_INPUT_RADIO 4
+#define PVR2_CVAL_INPUT_MAX PVR2_CVAL_INPUT_RADIO
+
+enum pvr2_config {
+	pvr2_config_empty,    /* No configuration */
+	pvr2_config_mpeg,     /* Encoded / compressed video */
+	pvr2_config_vbi,      /* Standard vbi info */
+	pvr2_config_pcm,      /* Audio raw pcm stream */
+	pvr2_config_rawvideo, /* Video raw frames */
+};
+
+enum pvr2_v4l_type {
+	pvr2_v4l_type_video,
+	pvr2_v4l_type_vbi,
+	pvr2_v4l_type_radio,
+};
+
+/* Major states that we can be in:
+ *
+ *  DEAD - Device is in an unusable state and cannot be recovered.  This
+ *  can happen if we completely lose the ability to communicate with it
+ *  (but it might still on the bus).  In this state there's nothing we can
+ *  do; it must be replugged in order to recover.
+ *
+ *  COLD - Device is in an unusable state, needs microcontroller firmware.
+ *
+ *  WARM - We can communicate with the device and the proper
+ *  microcontroller firmware is running, but other device initialization is
+ *  still needed (e.g. encoder firmware).
+ *
+ *  ERROR - A problem prevents capture operation (e.g. encoder firmware
+ *  missing).
+ *
+ *  READY - Device is operational, but not streaming.
+ *
+ *  RUN - Device is streaming.
+ *
+ */
+#define PVR2_STATE_NONE 0
+#define PVR2_STATE_DEAD 1
+#define PVR2_STATE_COLD 2
+#define PVR2_STATE_WARM 3
+#define PVR2_STATE_ERROR 4
+#define PVR2_STATE_READY 5
+#define PVR2_STATE_RUN 6
+
+/* Translate configuration enum to a string label */
+const char *pvr2_config_get_name(enum pvr2_config);
+
+struct pvr2_hdw;
+
+/* Create and return a structure for interacting with the underlying
+   hardware */
+struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
+				 const struct usb_device_id *devid);
+
+/* Perform second stage initialization, passing in a notification callback
+   for when the master state changes. */
+int pvr2_hdw_initialize(struct pvr2_hdw *,
+			void (*callback_func)(void *),
+			void *callback_data);
+
+/* Destroy hardware interaction structure */
+void pvr2_hdw_destroy(struct pvr2_hdw *);
+
+/* Return true if in the ready (normal) state */
+int pvr2_hdw_dev_ok(struct pvr2_hdw *);
+
+/* Return small integer number [1..N] for logical instance number of this
+   device.  This is useful for indexing array-valued module parameters. */
+int pvr2_hdw_get_unit_number(struct pvr2_hdw *);
+
+/* Get pointer to underlying USB device */
+struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *);
+
+/* Retrieve serial number of device */
+unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *);
+
+/* Retrieve bus location info of device */
+const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *);
+
+/* Retrieve per-instance string identifier for this specific device */
+const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *);
+
+/* Called when hardware has been unplugged */
+void pvr2_hdw_disconnect(struct pvr2_hdw *);
+
+/* Sets v4l2_dev of a video_device struct */
+void pvr2_hdw_set_v4l2_dev(struct pvr2_hdw *, struct video_device *);
+
+/* Get the number of defined controls */
+unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *);
+
+/* Retrieve a control handle given its index (0..count-1) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *,unsigned int);
+
+/* Retrieve a control handle given its internal ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *,unsigned int);
+
+/* Retrieve a control handle given its V4L ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *,unsigned int ctl_id);
+
+/* Retrieve a control handle given its immediate predecessor V4L ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *,
+					    unsigned int ctl_id);
+
+/* Commit all control changes made up to this point */
+int pvr2_hdw_commit_ctl(struct pvr2_hdw *);
+
+/* Return a bit mask of valid input selections for this device.  Mask bits
+ * will be according to PVR_CVAL_INPUT_xxxx definitions. */
+unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *);
+
+/* Return a bit mask of allowed input selections for this device.  Mask bits
+ * will be according to PVR_CVAL_INPUT_xxxx definitions. */
+unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *);
+
+/* Change the set of allowed input selections for this device.  Both
+   change_mask and change_valu are mask bits according to
+   PVR_CVAL_INPUT_xxxx definitions.  The change_mask parameter indicate
+   which settings are being changed and the change_val parameter indicates
+   whether corresponding settings are being set or cleared. */
+int pvr2_hdw_set_input_allowed(struct pvr2_hdw *,
+			       unsigned int change_mask,
+			       unsigned int change_val);
+
+/* Return name for this driver instance */
+const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *);
+
+/* Mark tuner status stale so that it will be re-fetched */
+void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *);
+
+/* Return information about the tuner */
+int pvr2_hdw_get_tuner_status(struct pvr2_hdw *,struct v4l2_tuner *);
+
+/* Return information about cropping capabilities */
+int pvr2_hdw_get_cropcap(struct pvr2_hdw *, struct v4l2_cropcap *);
+
+/* Query device and see if it thinks it is on a high-speed USB link */
+int pvr2_hdw_is_hsm(struct pvr2_hdw *);
+
+/* Return a string token representative of the hardware type */
+const char *pvr2_hdw_get_type(struct pvr2_hdw *);
+
+/* Return a single line description of the hardware type */
+const char *pvr2_hdw_get_desc(struct pvr2_hdw *);
+
+/* Turn streaming on/off */
+int pvr2_hdw_set_streaming(struct pvr2_hdw *,int);
+
+/* Find out if streaming is on */
+int pvr2_hdw_get_streaming(struct pvr2_hdw *);
+
+/* Retrieve driver overall state */
+int pvr2_hdw_get_state(struct pvr2_hdw *);
+
+/* Configure the type of stream to generate */
+int pvr2_hdw_set_stream_type(struct pvr2_hdw *, enum pvr2_config);
+
+/* Get handle to video output stream */
+struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *);
+
+/* Enable / disable retrieval of CPU firmware or prom contents.  This must
+   be enabled before pvr2_hdw_cpufw_get() will function.  Note that doing
+   this may prevent the device from running (and leaving this mode may
+   imply a device reset). */
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *,
+				int mode, /* 0=8KB FX2, 1=16KB FX2, 2=PROM */
+				int enable_flag);
+
+/* Return true if we're in a mode for retrieval CPU firmware */
+int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *);
+
+/* Retrieve a piece of the CPU's firmware at the given offset.  Return
+   value is the number of bytes retrieved or zero if we're past the end or
+   an error otherwise (e.g. if firmware retrieval is not enabled). */
+int pvr2_hdw_cpufw_get(struct pvr2_hdw *,unsigned int offs,
+		       char *buf,unsigned int cnt);
+
+/* Retrieve a previously stored v4l minor device number */
+int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *,enum pvr2_v4l_type index);
+
+/* Store a v4l minor device number */
+void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *,
+				     enum pvr2_v4l_type index,int);
+
+/* The following entry points are all lower level things you normally don't
+   want to worry about. */
+
+/* Issue a command and get a response from the device.  LOTS of higher
+   level stuff is built on this. */
+int pvr2_send_request(struct pvr2_hdw *,
+		      void *write_ptr,unsigned int write_len,
+		      void *read_ptr,unsigned int read_len);
+
+/* Slightly higher level device communication functions. */
+int pvr2_write_register(struct pvr2_hdw *, u16, u32);
+
+/* Call if for any reason we can't talk to the hardware anymore - this will
+   cause the driver to stop flailing on the device. */
+void pvr2_hdw_render_useless(struct pvr2_hdw *);
+
+/* Set / clear 8051's reset bit */
+void pvr2_hdw_cpureset_assert(struct pvr2_hdw *,int);
+
+/* Execute a USB-commanded device reset */
+void pvr2_hdw_device_reset(struct pvr2_hdw *);
+
+/* Reset worker's error trapping circuit breaker */
+int pvr2_hdw_untrip(struct pvr2_hdw *);
+
+/* Execute hard reset command (after this point it's likely that the
+   encoder will have to be reconfigured).  This also clears the "useless"
+   state. */
+int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *);
+
+/* Execute simple reset command */
+int pvr2_hdw_cmd_powerup(struct pvr2_hdw *);
+
+/* Order decoder to reset */
+int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *);
+
+/* Direct manipulation of GPIO bits */
+int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val);
+int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val);
+
+/* This data structure is specifically for the next function... */
+struct pvr2_hdw_debug_info {
+	int big_lock_held;
+	int ctl_lock_held;
+	int flag_disconnected;
+	int flag_init_ok;
+	int flag_ok;
+	int fw1_state;
+	int flag_decoder_missed;
+	int flag_tripped;
+	int state_encoder_ok;
+	int state_encoder_run;
+	int state_decoder_run;
+	int state_decoder_ready;
+	int state_usbstream_run;
+	int state_decoder_quiescent;
+	int state_pipeline_config;
+	int state_pipeline_req;
+	int state_pipeline_pause;
+	int state_pipeline_idle;
+	int cmd_debug_state;
+	int cmd_debug_write_len;
+	int cmd_debug_read_len;
+	int cmd_debug_write_pend;
+	int cmd_debug_read_pend;
+	int cmd_debug_timeout;
+	int cmd_debug_rstatus;
+	int cmd_debug_wstatus;
+	unsigned char cmd_code;
+};
+
+/* Non-intrusively retrieve internal state info - this is useful for
+   diagnosing lockups.  Note that this operation is completed without any
+   kind of locking and so it is not atomic and may yield inconsistent
+   results.  This is *purely* a debugging aid. */
+void pvr2_hdw_get_debug_info_unlocked(const struct pvr2_hdw *hdw,
+				      struct pvr2_hdw_debug_info *);
+
+/* Intrusively retrieve internal state info - this is useful for
+   diagnosing overall driver state.  This operation synchronizes against
+   the overall driver mutex - so if there are locking problems this will
+   likely hang!  This is *purely* a debugging aid. */
+void pvr2_hdw_get_debug_info_locked(struct pvr2_hdw *hdw,
+				    struct pvr2_hdw_debug_info *);
+
+/* Report out several lines of text that describes driver internal state.
+   Results are written into the passed-in buffer. */
+unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw,
+				   char *buf_ptr,unsigned int buf_size);
+
+/* Cause modules to log their state once */
+void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw);
+
+/* Cause encoder firmware to be uploaded into the device.  This is normally
+   done autonomously, but the interface is exported here because it is also
+   a debugging aid. */
+int pvr2_upload_firmware2(struct pvr2_hdw *hdw);
+
+#endif /* __PVRUSB2_HDW_H */